Johan Hovold [Thu, 12 Jan 2023 07:45:03 +0000 (08:45 +0100)]
arm64: dts: qcom: sc8280xp-crd: allow vreg_l3b to be disabled
The vreg_l3b supply is used by the eDP, UFS and USB1 PHYs which are now
described by the devicetree so that the regulator no longer needs to be
marked always-on.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230112074503.12185-1-johan+linaro@kernel.org
Mukesh Ojha [Thu, 12 Jan 2023 08:54:57 +0000 (14:24 +0530)]
arm64: dts: qcom: sm8450: Add TCSR halt register space
Add TCSR register space and refer it from scm node, so that
it can be used by SCM driver.
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1673513697-30173-2-git-send-email-quic_mojha@quicinc.com
Bjorn Andersson [Thu, 12 Jan 2023 13:51:17 +0000 (05:51 -0800)]
arm64: dts: qcom: sc8280xp: Vote for CX in USB controllers
Running GCC_USB30_*_MASTER_CLK at 200MHz requires CX at nominal level,
not doing so results in occasional lockups. This was previously hidden
by the fact that the display stack incorrectly voted for CX (instead of
MMCX).
Fixes:
152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230112135117.3836655-1-quic_bjorande@quicinc.com
Dmitry Baryshkov [Mon, 9 Jan 2023 00:29:35 +0000 (02:29 +0200)]
arm64: dts: qcom: sm8250: drop the virtual ipa-virt device
Drop the virtual ipa-virt device. The interconnects it provided are
going to be represented as <&rpmhcc RPMH_IPA_CLK> clock.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109002935.244320-13-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Mon, 9 Jan 2023 00:29:34 +0000 (02:29 +0200)]
arm64: dts: qcom: sm8150: drop the virtual ipa-virt device
Drop the virtual ipa-virt device. The interconnects it provided are
going to be represented as <&rpmhcc RPMH_IPA_CLK> clock.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109002935.244320-12-dmitry.baryshkov@linaro.org
Luca Weiss [Fri, 6 Jan 2023 15:39:42 +0000 (16:39 +0100)]
arm64: dts: qcom: pm7250b: Add BAT_ID vadc channel
Add a node describing the ADC5_BAT_ID_100K_PU channel with the
properties taken from downstream kernel.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106-pm7250b-bat_id-v1-2-82ca8f2db741@fairphone.com
Stephan Gerhold [Sat, 7 Jan 2023 11:09:58 +0000 (12:09 +0100)]
arm64: dts: qcom: msm8916: Add DMA for all I2C controllers
i2c-qup allows using DMA to speed up larger transfers. In msm8916.dtsi
the DMA channels are already assigned to the SPI controllers but
missing for I2C. Add them there as well.
This also fixes confusing errors in dmesg for each I2C controller:
i2c_qup 78b6000.i2c: tx channel not available
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107110958.5762-3-stephan@gerhold.net
Stephan Gerhold [Sat, 7 Jan 2023 11:09:57 +0000 (12:09 +0100)]
arm64: dts: qcom: msm8916: Enable blsp_dma by default
Adding the "dmas" to the I2C controllers prevents probing them if
blsp_dma is disabled (infinite probe deferral). Avoid this by enabling
blsp_dma by default - it's an integral part of the SoC that is almost
always used (even if just for UART).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107110958.5762-2-stephan@gerhold.net
Lin, Meng-Bo [Sat, 7 Jan 2023 13:33:20 +0000 (13:33 +0000)]
arm64: dts: qcom: msm8916-gplus-fl8005a: Add flash LED
FL8005A uses Qualcomm GPIO flash LEDs which is compatible with
SGM3140 Flash LED driver. Add it to the device tree.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107133235.139947-1-linmengbo0689@protonmail.com
Lin, Meng-Bo [Sat, 7 Jan 2023 13:33:05 +0000 (13:33 +0000)]
arm64: dts: qcom: msm8916-gplus-fl8005a: Add touchscreen
FL8005A uses a Focaltech FT5402 touchscreen that is connected to
blsp_i2c5. Add it to the device tree.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107133223.139893-1-linmengbo0689@protonmail.com
Lin, Meng-Bo [Sat, 7 Jan 2023 13:32:56 +0000 (13:32 +0000)]
arm64: dts: qcom: msm8916-gplus-fl8005a: Add initial device tree
GPLUS FL8005A is a tablet using the MSM8916 SoC released in 2015.
Add a device tree for with initial support for:
- GPIO keys
- GPIO LEDs
- pm8916-vibrator
- SDHCI (internal and external storage)
- USB Device Mode
- UART
- WCNSS (WiFi/BT)
- Regulators
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107133210.139839-1-linmengbo0689@protonmail.com
Dmitry Baryshkov [Wed, 11 Jan 2023 19:16:34 +0000 (22:16 +0300)]
arm64: dts: qcom: msm8996: mark apcs as clock provider
Now as we added the APCS clock controller support, mark apcs device as
clock provider by adding #clock-cells property.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111191634.2509616-1-dmitry.baryshkov@linaro.org
Johan Hovold [Wed, 11 Jan 2023 16:03:35 +0000 (17:03 +0100)]
arm64: dts: qcom: sa8540p-pmics: rename pmic labels
The SA8540P PMICs are named PMM8540. Rename the devicetree source labels
to reflect this.
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Eric Chanudet <echanude@redhat.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111160335.7175-3-johan+linaro@kernel.org
Johan Hovold [Wed, 11 Jan 2023 16:03:34 +0000 (17:03 +0100)]
arm64: dts: qcom: sa8540p-pmics: add missing interrupt include
Add the missing interrupt-controller include which is needed by the RTC
node.
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Eric Chanudet <echanude@redhat.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111160335.7175-2-johan+linaro@kernel.org
Johan Hovold [Wed, 11 Jan 2023 13:31:28 +0000 (14:31 +0100)]
arm64: dts: qcom: sc8280xp-x13s: enable eDP display
Enable the eDP display on MDSS0 DP3, including backlight control.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111133128.31813-1-johan+linaro@kernel.org
Bjorn Andersson [Wed, 11 Jan 2023 03:59:05 +0000 (19:59 -0800)]
arm64: dts: qcom: sa8295-adp: Enable DP instances
The SA8295P ADP has, among other interfaces, six MiniDP connectors which
are connected to MDSS0 DP2 and DP3, and MDSS1 DP0 through DP3.
Enable Display Clock controllers, MDSS instanced, MDPs, DP controllers,
DP PHYs and link them all together.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111035906.2975494-4-quic_bjorande@quicinc.com
Bjorn Andersson [Wed, 11 Jan 2023 03:59:04 +0000 (19:59 -0800)]
arm64: dts: qcom: sc8280xp-crd: Enable EDP
The SC8280XP CRD has a EDP display on MDSS0 DP3, enable relevant nodes
and link it together with the backlight control.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111035906.2975494-3-quic_bjorande@quicinc.com
Bjorn Andersson [Wed, 11 Jan 2023 03:59:03 +0000 (19:59 -0800)]
arm64: dts: qcom: sc8280xp: Define some of the display blocks
Define the display clock controllers, the MDSS instances, the DP phys
and connect these together.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111035906.2975494-2-quic_bjorande@quicinc.com
Bjorn Andersson [Wed, 11 Jan 2023 05:04:59 +0000 (23:04 -0600)]
Revert "dt-bindings: arm: qcom: Add SM6115(P) and Lenovo Tab P11"
This reverts commit
92ad27fb925943d62deaaa659931ce85ddec99c8, as this
was applied to the wrong branch and causes merge conflicts.
Dmitry Baryshkov [Mon, 9 Jan 2023 04:24:06 +0000 (06:24 +0200)]
arm64: dts: qcom: msm8996-oneplus-common: drop vdda-supply from DSI PHY
14nm DSI PHY has the only supply, vcca. Drop the extra vdda-supply.
Fixes:
5a134c940cd3 ("arm64: dts: qcom: msm8996: add support for oneplus3(t)")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109042406.312047-1-dmitry.baryshkov@linaro.org
Marijn Suijten [Mon, 9 Jan 2023 23:41:32 +0000 (00:41 +0100)]
arm64: dts: qcom: sdm845-tama: Add volume up and camera GPIO keys
Tama has four GPIO-wired keys: two for camera focus and shutter /
snapshot, and two more for volume up and down. As per the comment these
used to not work because the necessary pin bias was missing, which is
now set via pinctrl on pm8998_gpios.
The missing bias has also been added to the existing volume down button,
which receives a node name and label cleanup at the same time to be more
consistent with other DTS and the newly added buttons. Its deprecated
gpio-key,wakeup property has also been replaced with wakeup-source.
Note that volume up is also available through the usual PON RESIN node,
but unlike other platforms only triggers when the power button is held
down at the same time making it unsuitable to serve as KEY_VOLUMEUP.
Fixes:
30a7f99befc6 ("arm64: dts: qcom: Add support for SONY Xperia XZ2 / XZ2C / XZ3 (Tama platform)")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109234133.365644-1-marijn.suijten@somainline.org
Dmitry Baryshkov [Tue, 10 Jan 2023 04:21:26 +0000 (06:21 +0200)]
arm64: dts: qcom: sdm845: make DP node follow the schema
Drop the #clock-cells (probably a leftover from the times before the DP
PHY split)
Fixes:
eaac4e55a6f4 ("arm64: dts: qcom: sdm845: add displayport node")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230110042126.702147-1-dmitry.baryshkov@linaro.org
Konrad Dybcio [Tue, 10 Jan 2023 14:36:42 +0000 (15:36 +0100)]
arm64: dts: qcom: msm8998: Use RPM XO
Feed GCC and SDHC_2 with the RPM XO instead of the fixed-clock one.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230110143642.986799-1-konrad.dybcio@linaro.org
Manivannan Sadhasivam [Mon, 2 Jan 2023 10:58:21 +0000 (16:28 +0530)]
arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1
Both PCIe0 and PCIe1 controllers are capable of signalling the MSIs
received from endpoint devices to the CPU using GIC-ITS MSI controller.
Add support for it.
Currently, BDF (0:0.0) and BDF (1:0.0) are enabled and with the
msi-map-mask of 0xff00, all the 32 devices under these two busses can
share the same Device ID.
The GIC-ITS MSI implementation provides an advantage over internal MSI
implementation using Locality-specific Peripheral Interrupts (LPI) that
would allow MSIs to be targeted for each CPU core.
It should be noted that the MSIs for BDF (1:0.0) only works with Device
ID of 0x5980 and 0x5a00. Hence, the IDs are swapped.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # Xperia 1 IV (WCN6855)
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102105821.28243-4-manivannan.sadhasivam@linaro.org
Krzysztof Kozlowski [Fri, 30 Dec 2022 14:01:33 +0000 (15:01 +0100)]
arm64: dts: qcom: add missing space before {
Add missingh whitespace between node name/label and opening {.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221230140133.57885-2-krzysztof.kozlowski@linaro.org
Dmitry Baryshkov [Wed, 28 Dec 2022 18:52:37 +0000 (20:52 +0200)]
arm64: dts: qcom: msm8998: get rid of test clock
The test clock apparently it's not used by anyone upstream. Remove it.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228185237.3111988-17-dmitry.baryshkov@linaro.org
Krzysztof Kozlowski [Fri, 23 Dec 2022 13:21:21 +0000 (14:21 +0100)]
arm64: dts: qcom: sm8450: correct Soundwire wakeup interrupt name
The bindings expect second Soundwire interrupt to be "wakeup" (Linux
driver takes by index):
sm8450-hdk.dtb: soundwire-controller@33b0000: interrupt-names:1: 'wakeup' was expected
Fixes:
14341e76dbc7 ("arm64: dts: qcom: sm8450: add Soundwire and LPASS")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221223132121.81130-1-krzysztof.kozlowski@linaro.org
Eric Chanudet [Mon, 19 Dec 2022 19:10:01 +0000 (14:10 -0500)]
arm64: dts: qcom: pm8941-rtc add alarm register
A few descriptions including a qcom,pm8941-rtc describe two reg-names
for the "rtc" and "alarm" register banks, but only one offset.
For consistency with reg-names, add the "alarm" register offset.
No functional change is expected from this.
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221219191000.2570545-5-echanude@redhat.com
Eric Chanudet [Mon, 19 Dec 2022 19:10:00 +0000 (14:10 -0500)]
arm64: dts: qcom: sa8295p-adp: use sa8540p-pmics
Include the dtsi to use a single pmic descriptions.
Both sa8295p-adp and sa8540p-adp have the same spmi pmic apparently.
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221219191000.2570545-4-echanude@redhat.com
Eric Chanudet [Mon, 19 Dec 2022 19:09:59 +0000 (14:09 -0500)]
arm64: dts: qcom: sa8450p-pmics: add rtc node
Add the rtc block on the first pmic to enable the rtc for sa8540p-ride.
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221219191000.2570545-3-echanude@redhat.com
Eric Chanudet [Mon, 19 Dec 2022 19:09:58 +0000 (14:09 -0500)]
arm64: dts: qcom: rename pm8450a dtsi to sa8540p-pmics
pm8450a.dtsi was introduced for the descriptions of pmics used on
sa8540p based boards. Rename the dtsi to make this relationship
explicit.
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221219191000.2570545-2-echanude@redhat.com
Konrad Dybcio [Mon, 19 Dec 2022 16:26:18 +0000 (17:26 +0100)]
arm64: dts: qcom: sm8350: Drop standalone smem node
SM8350 is one of the last SoCs whose DTSI escaped the smem node
conversion. Use the newer memory-node binding instead of a memory *and*
smem node.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221219162618.873117-1-konrad.dybcio@linaro.org
Dmitry Baryshkov [Sat, 17 Dec 2022 00:33:49 +0000 (02:33 +0200)]
arm64: dts: qcom: sm8450-hdk: add missing PMIC includes
Add includes for PMICs used on the SM8450-HDK. This makes GPIO blocks
and thermal sensors available to the user of the platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221217003349.546852-6-dmitry.baryshkov@linaro.org
Vinod Koul [Sat, 17 Dec 2022 00:33:48 +0000 (02:33 +0200)]
arm64: dts: qcom: sm8450-hdk: add pmic files
SM8450 HDK features bunch of PMICs, add the PMICs which we have already
upstream files
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221217003349.546852-5-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sat, 17 Dec 2022 00:33:47 +0000 (02:33 +0200)]
arm64: dts: qcom: sm8450-qrd: add missing PMIC includes
Add includes for PMICs used on the SM8450-HDK. This makes GPIO blocks
and thermal sensors available to the user of the platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221217003349.546852-4-dmitry.baryshkov@linaro.org
Vinod Koul [Sat, 17 Dec 2022 00:33:46 +0000 (02:33 +0200)]
arm64: dts: qcom: sm8450-qrd: add pmic files
SM8450 QRD features bunch of PMICs, add the PMICs which we have already
upstream files
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221217003349.546852-3-dmitry.baryshkov@linaro.org
Krzysztof Kozlowski [Wed, 14 Dec 2022 11:04:48 +0000 (12:04 +0100)]
arm64: dts: qcom: replace underscores in node names
Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens. In few places adjust the name to
match other nodes (e.g. xxx-regulator).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221214110448.86268-1-krzysztof.kozlowski@linaro.org
Owen Yang [Wed, 14 Dec 2022 03:47:49 +0000 (11:47 +0800)]
arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie with NVMe
Add DT for sc7280-herobrine-zombie with NVMe
Signed-off-by: Owen Yang <ecs.taipeikernel@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221214114706.2.I1a0c709f8ec86cc5b38f0fe9f9b26694b1eb69d6@changeid
Konrad Dybcio [Tue, 13 Dec 2022 18:33:04 +0000 (19:33 +0100)]
arm64: dts: qcom: sm8450: Add fallback CCI compatible
Add a fallback CCI compatible, as required by bindings.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213183305.544644-5-konrad.dybcio@linaro.org
Konrad Dybcio [Tue, 13 Dec 2022 18:33:03 +0000 (19:33 +0100)]
arm64: dts: qcom: sm8250: Add fallback CCI compatible
Add a fallback CCI compatible, as required by bindings.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213183305.544644-4-konrad.dybcio@linaro.org
Konrad Dybcio [Tue, 13 Dec 2022 18:33:02 +0000 (19:33 +0100)]
arm64: dts: qcom: sdm845: Add fallback CCI compatible
Add a fallback CCI compatible, as required by bindings.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213183305.544644-3-konrad.dybcio@linaro.org
Konrad Dybcio [Tue, 13 Dec 2022 18:33:01 +0000 (19:33 +0100)]
arm64: dts: qcom: msm8916: Add fallback CCI compatible
Add a fallback CCI compatible, as required by bindings.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213183305.544644-2-konrad.dybcio@linaro.org
Konrad Dybcio [Tue, 13 Dec 2022 13:25:17 +0000 (14:25 +0100)]
arm64: dts: qcom: sm8450-nagara: Disable empty i2c bus
As much as it hurts me, there is no FM radio chips on these devices.
It seems to be present on Japanese models, but these are not available
globally and differ in a few more ways anyway (such as a super high-tech
NFC chip). Since it's the only subdevice of its I2C host bus, disable
said bus to save some power.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213132517.203609-3-konrad.dybcio@linaro.org
Konrad Dybcio [Tue, 13 Dec 2022 13:25:16 +0000 (14:25 +0100)]
arm64: dts: qcom: sm8350-sagami: Disable empty i2c bus
As much as it hurts me, there is no FM radio chips on these devices.
It seems to be present on Japanese models, but these are not available
globally and differ in a few more ways anyway (such as a super high-tech
NFC chip). Since it's the only subdevice of its I2C host bus, disable
said bus to save some power.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213132517.203609-2-konrad.dybcio@linaro.org
Konrad Dybcio [Tue, 13 Dec 2022 13:25:15 +0000 (14:25 +0100)]
arm64: dts: qcom: sm8250-edo: Remove misleading comments
As much as it hurts me, there is no FM radio chips on these devices.
It seems to be present on Japanese models, but these are not available
globally and differ in a few more ways anyway (such as a super high-tech
NFC chip).
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213132517.203609-1-konrad.dybcio@linaro.org
Srinivasa Rao Mandadapu [Tue, 13 Dec 2022 11:56:06 +0000 (17:26 +0530)]
arm64: dts: qcom: sc7180: Set performance state for audio
Set a performance state for audio clks so that the minimally
correct corner voltage is picked when audio is active.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1670932566-22923-1-git-send-email-quic_srivasam@quicinc.com
Krzysztof Kozlowski [Tue, 13 Dec 2022 10:19:20 +0000 (11:19 +0100)]
arm64: dts: qcom: rename AOSS QMP nodes
The Always On Subsystem (AOSS) QMP is not a power domain controller
since commit
135780456218 ("arm64: dts: qcom: sc7180: Use QMP property
to control load state") and few others. In fact, it was never a power
domain controller but rather control of power state of remote
processors. This power state control is now handled differently, thus
the AOSS QMP nodes do not have power-domain-cells:
sc7280-idp.dtb: power-controller@c300000: '#power-domain-cells' is a required property
From schema: Documentation/devicetree/bindings/power/power-domain.yaml
AOSS QMP is an interface to the actuall AOSS subsystem responsible for
some of power management functions, thus let's call the nodes as
"power-management".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213101921.47924-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 13 Dec 2022 10:19:19 +0000 (11:19 +0100)]
arm64: dts: qcom: sc8280xp: correct SPMI bus address cells
The SPMI bus uses two address cells and zero size cells (second reg
entry - SPMI_USID - is not the size):
spmi@c440000: #address-cells:0:0: 2 was expected
Fixes:
152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213101921.47924-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 13 Dec 2022 10:19:18 +0000 (11:19 +0100)]
arm64: dts: qcom: sc7280: correct SPMI bus address cells
The SPMI bus uses two address cells and zero size cells (second reg
entry - SPMI_USID - is not the size):
spmi@c440000: #address-cells:0:0: 2 was expected
Fixes:
14abf8dfe364 ("arm64: dts: qcom: sc7280: Add SPMI PMIC arbiter device for SC7280")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213101921.47924-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 13 Dec 2022 10:19:17 +0000 (11:19 +0100)]
arm64: dts: qcom: sc7180: correct SPMI bus address cells
The SPMI bus uses two address cells and zero size cells (second reg
entry - SPMI_USID - is not the size):
spmi@c440000: #address-cells:0:0: 2 was expected
Fixes:
0f9dc5f09fbd ("arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213101921.47924-1-krzysztof.kozlowski@linaro.org
Shazad Hussain [Tue, 13 Dec 2022 09:59:21 +0000 (15:29 +0530)]
arm64: dts: qcom: sa8540p-ride: enable pcie2a node
Add the pcie2a, pcie2a_phy, and respective tlmm nodes that are needed to
get pcie 2a controller enabled on Qdrive3.
This patch enables 4GB 64bit memory space for PCIE_2A to have BAR
allocations of 64bit pref mem needed on this Qdrive3 platform with dual
SoCs for root port and switch NT-EP. Hence this ranges property is
overridden in sa8540p-ride.dts only.
Moved tlmm node at the end as it tends to become rahter long.
Link: https://lore.kernel.org/lkml/Y49k1k8ayI9%2FrK+R@hovoldconsulting.com/
Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213095922.11649-1-quic_shazhuss@quicinc.com
Krzysztof Kozlowski [Mon, 12 Dec 2022 10:02:28 +0000 (11:02 +0100)]
arm64: dts: qcom: sdm845: order top-level nodes alphabetically
Order top-level nodes like memory, reserved-memory, opp-table-cpu
alphabetically for easier code maintenance. No functional change (same
dtx_diff, except phandle changes).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov<dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221212100232.138519-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 12 Dec 2022 10:02:27 +0000 (11:02 +0100)]
arm64: dts: qcom: sc7180: order top-level nodes alphabetically
Order top-level nodes like memory, reserved-memory, opp-table-cpu
alphabetically for easier code maintenance. No functional change (same
dtx_diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov<dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221212100232.138519-1-krzysztof.kozlowski@linaro.org
Rob Herring [Wed, 7 Dec 2022 21:13:27 +0000 (15:13 -0600)]
arm64: dts: qcom: sc7280: Fix CPU nodes compatible string
'arm,kryo' is not documented and is not an Arm Ltd thing either as that
is Qualcomm branding. The correct compatible is 'qcom,kryo'.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221207211327.2848665-1-robh@kernel.org
Konrad Dybcio [Thu, 29 Dec 2022 10:32:12 +0000 (11:32 +0100)]
arm64: dts: qcom: sm8450-nagara: Configure SLG51000 PMIC
Nagara devices use the Dialog SLG51000 PMIC for powering some camera
sensors. Add the required nodes to support it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221229103212.984324-7-konrad.dybcio@linaro.org
Konrad Dybcio [Thu, 29 Dec 2022 10:32:11 +0000 (11:32 +0100)]
arm64: dts: qcom: sm8450-nagara: Enable PMIC RESIN+PON
Enable the power and volume up buttons, connected to PON and RESIN
respectively.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221229103212.984324-6-konrad.dybcio@linaro.org
Konrad Dybcio [Thu, 29 Dec 2022 10:32:10 +0000 (11:32 +0100)]
arm64: dts: qcom: sm8450-nagara: Set up camera regulators
Set up gpio-controlled fixed regulators for camera on PDX223 and fix
up the existing ones in common and PDX224 trees.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221229103212.984324-5-konrad.dybcio@linaro.org
Konrad Dybcio [Thu, 29 Dec 2022 10:32:09 +0000 (11:32 +0100)]
arm64: dts: qcom: sm8450-nagara: Add GPIO keys
With PMIC GPIOs now available, set up required pin settings and add
gpio-keys.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221229103212.984324-4-konrad.dybcio@linaro.org
Konrad Dybcio [Thu, 29 Dec 2022 10:32:08 +0000 (11:32 +0100)]
arm64: dts: qcom: sm8450-nagara: Add GPIO line names for PMIC GPIOs
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the PDX223&224 DTSIs to better document the hardware.
Diff between 223 and 224:
pm8350b
< "CAM_PWR_LD_EN",
> "NC",
pm8350c
< "RGBC_IR_PWR_EN",
> "NC",
Which is due to different camera power wiring on 223 and lack of a
ToF sensor on 224.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221229103212.984324-3-konrad.dybcio@linaro.org
Konrad Dybcio [Thu, 29 Dec 2022 10:32:07 +0000 (11:32 +0100)]
arm64: dts: qcom: sm8450-nagara: Include PMIC DTSIs
Now that SPMI is finally in place, include the DTSIs of PMICs present
on Nagara.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221229103212.984324-2-konrad.dybcio@linaro.org
Vinod Koul [Thu, 29 Dec 2022 10:32:06 +0000 (11:32 +0100)]
arm64: dts: qcom: sm8450: add spmi node
Add the spmi bus as found in the SM8450 SoC
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
[Konrad: 0x0 -> 0, move #cells down, make reg-names a vertical list]
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[bjorn: Adjusted unit address]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221229103212.984324-1-konrad.dybcio@linaro.org
Neil Armstrong [Wed, 16 Nov 2022 10:48:35 +0000 (11:48 +0100)]
arm64: dts: qcom: sm8550: add QCrypto nodes
Add the QCE and Crypto BAM DMA nodes.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221115-topic-sm8550-upstream-dts-qce-v1-0-fe750dfa90f6@linaro.org
Neil Armstrong [Wed, 16 Nov 2022 10:45:50 +0000 (11:45 +0100)]
arm64: dts: qcom: sm8550: add I2C Master Hub nodes
Add the I2C Master Hub wrapper and I2C serial engines nodes.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221115-topic-sm8550-upstream-dts-gpi-qup-v1-0-86a60cf3e57d@linaro.org
Abel Vesa [Fri, 6 Jan 2023 20:10:47 +0000 (22:10 +0200)]
arm64: dts: qcom: Add base SM8550 MTP dts
Add dts file for Qualcomm MTP platform which uses SM8550 SoC.
Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106201047.337409-11-abel.vesa@linaro.org
Neil Armstrong [Fri, 6 Jan 2023 20:10:46 +0000 (22:10 +0200)]
arm64: dts: qcom: Add PMR735d pmic dtsi
Add nodes for PMR735d in separate dtsi file.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106201047.337409-10-abel.vesa@linaro.org
Neil Armstrong [Fri, 6 Jan 2023 20:10:45 +0000 (22:10 +0200)]
arm64: dts: qcom: Add PMK8550 pmic dtsi
Add nodes for PMK8550 in separate dtsi file.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106201047.337409-9-abel.vesa@linaro.org
Neil Armstrong [Fri, 6 Jan 2023 20:10:44 +0000 (22:10 +0200)]
arm64: dts: qcom: Add PM8550vs pmic dtsi
Add nodes for PM8550vs in separate dtsi file.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106201047.337409-8-abel.vesa@linaro.org
Neil Armstrong [Fri, 6 Jan 2023 20:10:43 +0000 (22:10 +0200)]
arm64: dts: qcom: Add PM8550ve pmic dtsi
Add nodes for PM8550ve in separate dtsi file.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106201047.337409-7-abel.vesa@linaro.org
Neil Armstrong [Fri, 6 Jan 2023 20:10:42 +0000 (22:10 +0200)]
arm64: dts: qcom: Add PM8550b pmic dtsi
Add nodes for PM8550b in separate dtsi file.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106201047.337409-6-abel.vesa@linaro.org
Neil Armstrong [Fri, 6 Jan 2023 20:10:41 +0000 (22:10 +0200)]
arm64: dts: qcom: Add PM8550 pmic dtsi
Add nodes for PM8550 in separate dtsi file.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106201047.337409-5-abel.vesa@linaro.org
Neil Armstrong [Fri, 6 Jan 2023 20:10:40 +0000 (22:10 +0200)]
arm64: dts: qcom: Add pm8010 pmic dtsi
Add nodes for pm8010 in separate dtsi file.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106201047.337409-4-abel.vesa@linaro.org
Abel Vesa [Fri, 6 Jan 2023 20:10:39 +0000 (22:10 +0200)]
arm64: dts: qcom: Add base SM8550 dtsi
Add base dtsi for SM8550 SoC and includes base description of
CPUs, GCC, RPMHCC, UART, interrupt controller, TLMM, reserved
memory, RPMh PD, TCSRCC, ITS, IPCC, AOSS QMP, LLCC, cpufreq,
interconnect, thermal sensor, cpu cooling maps and SMMU nodes
which helps boot to shell with console on boards with this SoC.
Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106201047.337409-3-abel.vesa@linaro.org
Bjorn Andersson [Tue, 10 Jan 2023 18:25:33 +0000 (12:25 -0600)]
Merge branch '
20230104093450.3150578-2-abel.vesa@linaro.org' into arm64-for-6.3
Merge the TCSR clock binding, to gain the Devicetree include file.
Abel Vesa [Wed, 4 Jan 2023 09:34:47 +0000 (11:34 +0200)]
dt-bindings: clock: Add SM8550 TCSR CC clocks
Add bindings documentation for clock TCSR driver on SM8550.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104093450.3150578-2-abel.vesa@linaro.org
Bjorn Andersson [Tue, 10 Jan 2023 18:21:20 +0000 (12:21 -0600)]
Merge branch 'icc-sm8550-immutable' of https://git./linux/kernel/git/djakov/icc into arm64-for-6.3
Merge the immutable SM8550 interconnect branch, to gain the include file
from the binding.
Dmitry Baryshkov [Tue, 10 Jan 2023 05:54:33 +0000 (07:54 +0200)]
arm64: dts: qcom: sm8450: Add compat qcom,sm8450-dsi-ctrl
Add silicon specific compatible qcom,sm8450-dsi-ctrl to the
mdss-dsi-ctrl block. This allows us to differentiate the specific bindings
for sm8450 against the yaml documentation.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230110055433.734188-3-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Tue, 10 Jan 2023 05:54:32 +0000 (07:54 +0200)]
arm64: dts: qcom: sm8150: Add compat qcom,sm8150-dsi-ctrl
Add silicon specific compatible qcom,sm8150-dsi-ctrl to the
mdss-dsi-ctrl block. This allows us to differentiate the specific bindings
for sm8150 against the yaml documentation.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230110055433.734188-2-dmitry.baryshkov@linaro.org
Krzysztof Kozlowski [Thu, 22 Dec 2022 15:13:19 +0000 (16:13 +0100)]
arm64: dts: qcom: sdm845: do not customize SPI0 pin drive/bias
Each board should define pin drive/bias for used busses. All boards
using SPI0 (db845c and cheza) already do it, so drop the bias/drive
strength from SoC DTSI.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222151319.122398-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 22 Dec 2022 15:13:18 +0000 (16:13 +0100)]
arm64: dts: qcom: sdm845: align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222151319.122398-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 22 Dec 2022 15:13:17 +0000 (16:13 +0100)]
arm64: dts: qcom: sdm845-xiaomi-beryllium: fix audio codec interrupt pin name
The pin config entry should have a string, not number, for the GPIO used
as WCD9340 audio codec interrupt.
Fixes:
dd6459a0890a ("arm64: dts: qcom: split beryllium dts into common dtsi and tianma dts")
Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222151319.122398-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 22 Dec 2022 15:13:16 +0000 (16:13 +0100)]
arm64: dts: qcom: sdm845-db845c: fix audio codec interrupt pin name
The pin config entry should have a string, not number, for the GPIO used
as WCD9340 audio codec interrupt.
Fixes:
89a32a4e769c ("arm64: dts: qcom: db845c: add analog audio support")
Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222151319.122398-1-krzysztof.kozlowski@linaro.org
Quentin Schulz [Mon, 5 Dec 2022 13:40:37 +0000 (14:40 +0100)]
arm64: dts: qcom: msm8998-fxtec: fix touchscreen reset GPIO polarity
The reset line is active low for the Goodix touchscreen controller so
let's fix the polarity in the Device Tree node.
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221103-upstream-goodix-reset-v3-8-0975809eb183@theobroma-systems.com
Krzysztof Kozlowski [Mon, 2 Jan 2023 08:54:52 +0000 (09:54 +0100)]
arm64: dts: qcom: sm8450: align PSCI domain names with DT schema
Bindings expect power domains to follow generic naming pattern:
sm8450-qrd.dtb: psci: 'cpu-cluster0', 'cpu0', 'cpu1', 'cpu2', 'cpu3', 'cpu4', 'cpu5', 'cpu6',
'cpu7' do not match any of the regexes: '^power-domain-', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102085452.10753-6-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 2 Jan 2023 08:54:51 +0000 (09:54 +0100)]
arm64: dts: qcom: sm8350: align PSCI domain names with DT schema
Bindings expect power domains to follow generic naming pattern:
sm8350-hdk.dtb: psci: 'cpu-cluster0', 'cpu0', 'cpu1', 'cpu2', 'cpu3', 'cpu4', 'cpu5', 'cpu6',
'cpu7' do not match any of the regexes: '^power-domain-', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102085452.10753-5-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 2 Jan 2023 08:54:50 +0000 (09:54 +0100)]
arm64: dts: qcom: sm8250: align PSCI domain names with DT schema
Bindings expect power domains to follow generic naming pattern:
sm8250-hdk.dtb: psci: 'cpu-cluster0', 'cpu0', 'cpu1', 'cpu2', 'cpu3', 'cpu4', 'cpu5', 'cpu6',
'cpu7' do not match any of the regexes: '^power-domain-', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102085452.10753-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 2 Jan 2023 08:54:49 +0000 (09:54 +0100)]
arm64: dts: qcom: sm8150: align PSCI domain names with DT schema
Bindings expect power domains to follow generic naming pattern:
sm8150-hdk.dtb: psci: 'cpu-cluster0', 'cpu0', 'cpu1', 'cpu2', 'cpu3', 'cpu4', 'cpu5', 'cpu6',
'cpu7' do not match any of the regexes: '^power-domain-', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102085452.10753-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 2 Jan 2023 08:54:48 +0000 (09:54 +0100)]
arm64: dts: qcom: sm6375: align PSCI domain names with DT schema
Bindings expect power domains to follow generic naming pattern:
sm6375-sony-xperia-murray-pdx225.dtb: psci: 'cpu-cluster0', 'cpu0', 'cpu1', 'cpu2', 'cpu3', 'cpu4', 'cpu5', 'cpu6',
'cpu7' do not match any of the regexes: '^power-domain-', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102085452.10753-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 2 Jan 2023 08:54:47 +0000 (09:54 +0100)]
arm64: dts: qcom: sc8280xp: align PSCI domain names with DT schema
Bindings expect power domains to follow generic naming pattern:
sc8280xp-crd.dtb: psci: 'cpu-cluster0', 'cpu0', 'cpu1', 'cpu2', 'cpu3', 'cpu4', 'cpu5', 'cpu6',
'cpu7' do not match any of the regexes: '^power-domain-', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102085452.10753-1-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 2 Jan 2023 12:37:34 +0000 (13:37 +0100)]
arm64: dts: qcom: sm8450: disable by default Soundwire and VA-macro
Soundwire is a bus and VA-macro requires a supply, thus both are
expected to be explicitly enabled and populated by board DTS. The
HDK8450 already enables Soundwire devices, except swr4 which as a result
of this commit will stay disabled.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102123734.478433-1-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 24 Dec 2022 15:42:55 +0000 (16:42 +0100)]
arm64: dts: qcom: use generic node name for CS35L41 speaker
Node names should be generic so use consistently speaker-amp for CS35L41
speaker amplifier.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221224154255.43499-5-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 24 Dec 2022 15:42:54 +0000 (16:42 +0100)]
arm64: dts: qcom: sm8450: re-order GCC clocks
Bindings expect GCC clocks in other order:
sm8450-hdk.dtb: clock-controller@100000: clock-names:1: 'sleep_clk' was expected
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221224154255.43499-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 24 Dec 2022 15:42:53 +0000 (16:42 +0100)]
arm64: dts: qcom: sm8250: drop unused clock-frequency from va-macro
Neither qcom,sm8250-lpass-va-macro bindings nor the driver use
"clock-frequency" property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221224154255.43499-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 24 Dec 2022 15:42:51 +0000 (16:42 +0100)]
arm64: dts: qcom: msm8996: align bus node names with DT schema
The node names should be generic and the bindings expect "bus" for
simple-bus nodes:
msm8996-mtp.dtb: agnoc@0: $nodename:0: 'agnoc@0' does not match '^bus(@[0-9a-f]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221224154255.43499-1-krzysztof.kozlowski@linaro.org
Marijn Suijten [Fri, 16 Dec 2022 23:34:08 +0000 (00:34 +0100)]
arm64: dts: qcom: sm6125-seine: Enable GPI DMA 0, QUP 0 and I2C SEs
Enable I2C Serial Engines 1, 2 and 3 which are known to have hardware
connected to them, leaving the rest disabled to save on power. For
this, only GPI DMA 0 and QUP 0 need to be enabled, as nothing seems to
be connected to Serial Engines on GPU DMA 1 / QUP 1. Beyond this
downstream only defines a UART console available on Serial Engine 4
which also resides on QUP 0.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221216233408.1283581-4-marijn.suijten@somainline.org
Marijn Suijten [Fri, 16 Dec 2022 23:34:07 +0000 (00:34 +0100)]
arm64: dts: qcom: sm6125: Add QUPs with SPI and I2C Serial Engines
Add Qualcomm Universal Peripheral nodes with SPI and I2C Serial Engines.
QUP 0 only has two SPIs at index 0 and 2, QUP 1 has four SPIs with a gap
in the middle (ranging from 5-9 with SPI 7 missing). Both QUPs have 5
I2C Serial Engines.
[Marijn: Add iommus, reword patch description, reorder all properties,
sort based on address, use QCOM_GPI_ constants, drop dma cells from 5
to 3]
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221216233408.1283581-3-marijn.suijten@somainline.org
Martin Botka [Fri, 16 Dec 2022 23:34:06 +0000 (00:34 +0100)]
arm64: dts: qcom: sm6125: Add pin configs for QUP SPI/I2C Serial Engines
Add pin setup for SPI/I2C Serial Engines that are supported under the
Qualcomm Universal Peripheral found on SM6125.
[Un-nest pins, remove duplicate pins= properties, follow new node naming
conventions, fix qup_14 -> qup14 function typo]
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221216233408.1283581-2-marijn.suijten@somainline.org
Marijn Suijten [Thu, 22 Dec 2022 19:24:43 +0000 (20:24 +0100)]
arm64: dts: qcom: sm6125-seine: Clean up gpio-keys (volume down)
- Remove autorepeat (leave key repetition to userspace);
- Remove unneeded status = "okay" (this is the default);
- Remove unneeded linux,input-type <EV_KEY> (this is the default for
gpio-keys);
- Allow the interrupt line for this button to be disabled;
- Use a full, descriptive node name;
- Set proper bias on the GPIO via pinctrl;
- Sort properties;
- Replace deprecated gpio-key,wakeup property with wakeup-source.
Fixes:
82e1783890b7 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222192443.119103-1-marijn.suijten@somainline.org
Martin Botka [Thu, 22 Dec 2022 19:46:00 +0000 (20:46 +0100)]
arm64: dts: qcom: sm6125: Add GPI DMA nodes
Add nodes for GPI DMA hosts on SM6125.
[Marijn: reorder properties, use sdm845 fallback compatible, disable by
default, use 3 instead of 5 dma cells]
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222194600.139854-3-marijn.suijten@somainline.org
AngeloGioacchino Del Regno [Thu, 22 Dec 2022 19:32:54 +0000 (20:32 +0100)]
arm64: dts: qcom: sm6125: Add IOMMU context to DWC3
Add an IOMMU context to the USB DWC3 controller, required to get USB
functionality upon enablement of apps_smmu.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222193254.126925-5-marijn.suijten@somainline.org
Marijn Suijten [Thu, 22 Dec 2022 19:32:53 +0000 (20:32 +0100)]
arm64: dts: qcom: sm6125: Add apps_smmu with streamID to SDHCI 1/2 nodes
When enabling the APPS SMMU the mainline driver reconfigures the SMMU
from its bootloader configuration, losing the stream mapping for (among
which) the SDHCI hardware and breaking its ADMA feature. This feature
can be disabled with:
sdhci.debug_quirks=0x40
But it is of course desired to have this feature enabled and working
through the SMMU.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222193254.126925-4-marijn.suijten@somainline.org