glsl: Fix lack of i2u in lower_ubo_reference.

ir_binop_ubo_load takes unsigned integer operands.  However, the array
index used to compute these offsets may be a signed integer.  (For
example, see Piglit's spec/glsl-1.40/uniform_buffer/fs-bvec-array).

For some reason, we were missing an ir_binop_i2u cast, and ir_validator
was failing to catch that.

Without this change, ir_builder's type inference code broke for me when
writing a new optimization pass.

Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965/fs: Skip emitting MACH/MOV for small integers.

The vector backend already implemented this optimization, but
surprisingly, we never bothered to implement it in the scalar backend.

In addition to saving two instructions, this eliminates a use of the
accumulator as an explicit source, which is unsupported in SIMD16 mode
on Gen7+, which could help us gain SIMD16 programs.

Cuts 19.23% of the instructions in dolphin/efb2ram.shader_test.

v2: Rebase on is_16bit_integer_constant -> is_uint16_constant rename.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Make is_16bit_constant from i965 an ir_constant method.

The i965 MUL instruction doesn't natively support 32-bit by 32-bit
integer multiplication; additional instructions (MACH/MOV) are required.
However, we can avoid those if we know one of the operands can be
represented in 16 bits or less.  The vector backend's is_16bit_constant
static helper function checks for this.

We want to be able to use it in the scalar backend as well, which means
moving the function to a more generally-usable location.  Since it isn't
i965 specific, I decided to make it an ir_constant method, in case it
ends up being useful to other people as well.

v2: Rename from is_16bit_integer_constant to is_uint16_constant, as
    suggested by Ilia Mirkin.  Update comments to clarify that it does
    apply to both int and uint types, as long as the value is
    non-negative and fits in 16-bits.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: Move is_power_of_two() function from brw_context.h to macros.h.

This makes the function available from core Mesa code, including the
GLSL compiler.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Fix "SIMD16 unsupported" messages via KHR_debug.

Performance warnings are logged via KHR_debug in addition to when the
INTEL_DEBUG=perf environment variable is set.  Without this, messages in
debug contexts would have "(null)" for the reason.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Fix missing dirty bits in the gen8_sbe_state atom.

These are clearly needed---the comments in the function are even present
for each one of them.   I originally had two separate state atoms for
3DSTATE_SBE and 3DSTATE_SBE_SWIZ.  When I combined the functions, I must
have forgotten to add the atoms for 3DSTATE_SBE_SWIZ.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

i965: Drop BRW_NEW_RASTERIZER_DISCARD flag from Broadwell SOL atom.

Nothing actually uses this---we handle rasterizer discard in the
clipper in order for statistics counters to work.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

i965: Use the correct program when uploading Broadwell SOL state.

This is the equivalent of commit 43e77215b13b2f86e461cd8a62b542f.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

st/xa: Make sure unused samplers are set to NULL

renderer_copy_prepare was setting the first sampler but never telling
the cso code how many samplers were actually used. Fix this.

Cc: "10.1" <mesa-stable@freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

st/xa: Bind destination before setting new state

Binding a new destination may cause the svga driver to emit draw calls
while propagating the surface. Make sure this doesn't happen in the middle
of sampler state setup where state may be incosistent.

In practice, surface propagation should never happen here and even if it did,
it wouldn't be a valid reason for the svga driver to emit partially set up
state, but to avoid future uncertainties, make sure this doesn't happen
anyway.

Found while auditing the state tracker for inconsistent sampler state /
sampler view setup.

Cc: "10.1" <mesa-stable@freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>

glapi: Fix libglapi build.

This line appears to have been accidentally dropped from the last commit,
and the resulting libglapi was missing symbols.

glapi/build: Add headers to distribution.

Acked-by: Emil Velikov <emil.l.velikov@gmail.com>

glapi/gen: Ship more Python files

Acked-by: Emil Velikov <emil.l.velikov@gmail.com>

glapi/gen: Ship XML and Python files

Acked-by: Emil Velikov <emil.l.velikov@gmail.com>

glapi/gen: Add missing XML files to API_XML

Also (re)move XML files from COMMON to API_XML.

Acked-by: Emil Velikov <emil.l.velikov@gmail.com>

src/build: Add getopt to distribution.

Acked-by: Emil Velikov <emil.l.velikov@gmail.com>

gbm/build: Add headers to distribution.

Acked-by: Emil Velikov <emil.l.velikov@gmail.com>

egl/build: Sort egl sources alphabetically.

Acked-by: Emil Velikov <emil.l.velikov@gmail.com>

egl/build: Remove unused -DXF86VIDMODE.

Acked-by: Emil Velikov <emil.l.velikov@gmail.com>

egl/build: Include headers and XML in distribution.

Acked-by: Emil Velikov <emil.l.velikov@gmail.com>

egl/build: Drop two unnecessary Makefiles.

Acked-by: Emil Velikov <emil.l.velikov@gmail.com>

i965/fs: Remove left-over 'removed' variable.

I think this was used for coalescing out partly dead large virtual
registers, but the patch that enabled that caused regressions and didn't
make it upstream.

Reviewed-by: Eric Anholt <eric@anholt.net>

i965/fs: Check for interference after finding all channels.

It's more likely that we won't find writes to all channels than one will
interfere, and calculating interference is more expensive. This change
will also help prepare for coalescing load_payload instructions'
operands.

Also update the live intervals for all channels, and not just the last
that we saw.

Reviewed-by: Eric Anholt <eric@anholt.net>

i965: initialize more device info fields for Cherryview

The intent in 9b6b084eb7b10d006b44e3cd22585fc3e39e0c00 was
for urb .size and .min_vs_entries fields to use the values
from the GEN8_FEATURES macro.

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

swrast: reindent s_texfetch_temp.h, remove trailing whitespace

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

swrast: remove out of date comments in s_texfetch_tmp.h

The comments were out of date and redundant (the functions are
pretty much self-explanatory).

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

swrast: rename texture fetch functions (pt. 7)

sed commands:
s/f_z24_s8/S8_UINT_Z24_UNORM/g
s/f_s8_z24/Z24_UNORM_S8_UINT/g
s/f_z16/Z_UNORM16/g
s/f_z32/Z_UNORM32/g
s/z32f_x24s8/Z32_FLOAT_S8X24_UINT/g
s/f_ycbcr_rev/YCBCR_REV/g
s/f_ycbcr/YCBCR/g
s/dudv8/DUDV8/g

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

swrast: rename texture fetch functions (pt. 6)

sed commands:
s/rgb9_e5/R9G9B9E5_FLOAT/g
s/r11_g11_b10f/R11G11B10_FLOAT/g
s/f_alpha_f16/A_FLOAT16/g
s/f_alpha_f32/A_FLOAT32/g
s/f_luminance_f16/L_FLOAT16/g
s/f_luminance_f32/L_FLOAT32/g
s/f_luminance_alpha_f16/LA_FLOAT16/g
s/f_luminance_alpha_f32/LA_FLOAT32/g
s/f_intensity_f16/I_FLOAT16/g
s/f_intensity_f32/I_FLOAT32/g
s/f_r_f16/R_FLOAT16/g
s/f_r_f32/R_FLOAT32/g
s/f_rg_f16/RG_FLOAT16/g
s/f_rg_f32/RG_FLOAT32/g
s/f_rgb_f16/RGB_FLOAT16/g
s/f_rgb_f32/RGB_FLOAT32/g
s/f_rgba_f16/RGBA_FLOAT16/g
s/f_rgba_f32/RGBA_FLOAT32/g
s/xbgr16161616_float/RGBX_FLOAT16/g
s/xbgr32323232_float/RGBX_FLOAT32/g

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

swrast: rename texture fetch functions (pt. 5)

sed commands:
s/srgba8/A8B8G8R8_SRGB/g
s/sargb8/B8G8R8A8_SRGB/g
s/sabgr8/R8G8B8A8_SRGB/g
s/sxbgr8/R8G8B8X8_SRGB/g
s/sla8/L8A8_SRGB/g
s/sl8/L_SRGB8/g
s/srgb8/BGR_SRGB8/g

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

swrast: rename texture fetch functions (pt. 4)

sed commands:
s/signed_rg1616/R16G16_SNORM/g
s/signed_rg88_rev/R8G8_SNORM/g
s/signed_al88/L8A8_SNORM/g
s/signed_a8/A_SNORM8/g
s/signed_a16/A_SNORM16/g
s/signed_l8/L_SNORM8/g
s/signed_l16/L_SNORM16/g
s/signed_i8/I_SNORM8/g
s/signed_i16/I_SNORM16/g
s/signed_r8/R_SNORM8/g
s/signed_r16/R_SNORM16/g
s/signed_al1616/LA_SNORM16/g
s/signed_rgb_16/RGB_SNORM16/g
s/signed_rgba_16/RGBA_SNORM16/g

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

swrast: rename texture fetch functions (pt. 3)

Rename functions to match format names.

sed commands:
s/f_rg1616_rev/G16R16_UNORM/g
s/f_rg1616/R16G16_UNORM/g
s/f_argb2101010/B10G10R10A2_UNORM/g
s/f_a8/A_UNORM8/g
s/f_a16/A_UNORM16/g
s/f_i8/I_UNORM8/g
s/f_i16/I_UNORM16/g
s/f_r8/R_UNORM8/g
s/f_r16/R_UNORM16/g
s/f_rgb888/BGR_UNORM8/g
s/f_bgr888/RGB_UNORM8/g
s/f_l8/L_UNORM8/g
s/f_l16/L_UNORM16/g
s/xbgr16161616_unorm/RGBX_UNORM16/g

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

swrast: rename texture fetch functions (pt. 2)

Rename functions to match format names.

sed commands:
s/f_al1616_rev/A16L16_UNORM/g
s/f_al1616/L16A16_UNORM/g
s/f_rgb565_rev/R5G6B5_UNORM/g
s/f_rgb565/B5G6R5_UNORM/g
s/f_argb4444_rev/A4R4G4B4_UNORM/g
s/f_argb4444/B4G4R4A4_UNORM/g
s/f_rgba5551/A1B5G5R5_UNORM/g
s/f_argb1555_rev/A1R5G5B5_UNORM/g
s/f_al88_rev/A8L8_UNORM/g
s/f_al88/L8A8_UNORM/g
s/f_gr88/R8G8_UNORM/g
s/f_rg88/G8R8_UNORM/g
s/f_al44/L4A4_UNORM/g
s/f_rgb332/B2G3R3_UNORM/g

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

swrast: rename texture fetch functions (pt. 1)

Rename functions to match format names.

sed commands:
s/signed_rgba8888_rev/R8G8B8A8_SNORM/g
s/signed_rgba8888/A8B8G8R8_SNORM/g
s/f_rgba8888_rev/R8G8B8A_UNORM/g
s/f_rgba8888/A8B8G8R8_UNORM/g
s/f_rgbx8888_rev/R8G8B8X8_UNORM/g
s/f_rgbx8888/X8B8G8R8_UNORM/g
s/f_argb8888_rev/A8R8G8B8_UNORM/g
s/f_argb8888/B8G8R8A8_UNORM/g
s/f_xrgb8888_rev/X8R8G8B8_UNORM/g
s/f_xrgb8888/B8G8R8X8_UNORM/g
s/signed_rgbx8888/X8B8G8R8_SNORM/g

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: rename stencil/Z functions in format_unpack.c

So the function names match the format names.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

nouveau: fix firmware check on nvd7/nvd9

The kernel driver expects the class to be based on chipset generation
rather than VP generation. Make sure to pass 90b1 for NVDX chipsets
instead of 95b1.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77102
Fixes: 40dd777b33073
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.1 10.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@ubunutu.com>

winsys/svga: Fix prime surface references also for guest-backed surfaces

Implement guest-backed surface sharing using prime fds. Previously only
legacy surfaces could use this functionality. Also use the vmwgfx 2.6
single-ioctl prime fd reference if available.

Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

winsys/svga: Update the vmwgfx_drm.h header to latest version from kernel

Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

docs: mark ARB_texture_gather as done on nvc0

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0: add support for texture gather

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

docs: mark ARB_texture_query_lod as done for nv50, nvc0

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0: enable texture query lod

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nv50: enable texture query lod

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

st/mesa: add support for ARB_texture_query_lod

Add support for the LODQ texture instruction.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium: add support for LODQ opcodes.

This opcode provide support for GL_ARB_texture_query_lod,

Signed-off-by: Dave Airlie <airlied@redhat.com>
[imirkin: rebase, docs update]
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

i965/vec4: Allow constant propagation into dot product.

total instructions in shared programs: 1667088 -> 1667055 (-0.00%)
instructions in affected programs:     3362 -> 3329 (-0.98%)

Reviewed-by: Eric Anholt <eric@anholt.net>

glsl: Optimize (x + y cmp 0) into (x cmp -y).

Cuts a small handful of instructions in Serious Sam 3:

instructions in affected programs:     4692 -> 4666 (-0.55%)

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965/fs: Split out can_coalesce_vars() function.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965/fs: Split out is_coalesce_candidate() function.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965/fs: Split fs_visitor::register_coalesce() into its own file.

The function has gotten large, and brw_fs.cpp is the largest source file
in the driver.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965/fs: Mark appropriate fs_inst members as const.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965: Mark is_tex() and friends as const.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965/fs: Don't propagate saturation modifiers if there are source modifiers.

Which would lead to translating

   mad     vgrf9:F,  vgrf3:F, u0:F, vgrf6:F
   mov.sat vgrf7:F, -vgrf9:F

into

   mad.sat vgrf9:F,  vgrf3:F, u0:F, vgrf6:F
   mov     vgrf7:F, -vgrf9:F

Fixes some lighting effects in Dota2.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76749
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965/fs: Don't propagate saturate modifiers into partial writes.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965/fs: Fix off-by-one in saturate propagation.

ip needs to be initialized to start_ip - 1, since the first thing in the
main loop is ip++. Otherwise we would incorrectly propagate the saturate
from the mov to the mad:

   mad     a, b, c, d
   mov.sat x, a
   add     y, z, a

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965/vec4: Consider sources of non-GRF-dst instructions for dead channels.

Previously we'd ignore the sources of instructions with non-GRF
destinations when calculating calculating the dead channels. This would
lead to us incorrectly removing the first instruction in this sequence:

   mov vgrf11, ...
   cmp.ne.f0 null, vgrf11, 1.0
   mov vgrf11, ...

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76616

i965/fs: Name temporary ralloc contexts something other than mem_ctx.

Or else poor programmers might mistakenly use the temporary mem_ctx,
instead of the fs_visitor's mem_ctx and wonder why their code is
crashing.

Also remove the parenting. These contexts are local to the optimization
passes they're in and are freed at the end.

i965/fs: Recalculate live intervals in calculate_register_pressure().

Otherwise calling dump_instructions() after declaring a new fs_reg would
segfault when calculate_register_pressure()'s loop over reg walked off
the end of the virtual_grf_start[] array that calculate_live_intervals()
would have reallocated for you, if it had known there was a new
register.

egl/dri2: use drm macros to construct device name

Don't hardcode /dev/dri/card0 but instead use the drm
macros which allows the correct /dev/drm0 device to be
opened on OpenBSD.

v2: use snprintf and fallback to /dev/dri/card0
v3: check for snprintf truncation

Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

configure: don't require libudev for gbm or egl drm/wayland

After the loader changes libudev is no longer required for
gbm or the egl drm/wayland platforms.  Lets these build/run
on OpenBSD.

v2: preserve the libudev requirement for Linux as suggested
by Emil Velikov.

Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

egl/dri2: don't require libudev to build drm/wayland platforms

After the loader changes libudev is no longer required to
build gbm or the egl drm/wayland platforms.

Remove a libudev ifdef which allows the the drm egl driver
to be loaded on OpenBSD.

Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

automake: don't enable -Wl,--no-undefined on OpenBSD

OpenBSD does not have DT_NEEDED entries for libc by design,
over concerns how the symbols would be referenced after
changing the major version of the library.

So avoid -no-undefined checks on OpenBSD as they will fail.

v2: don't include the -no-undefined libtool option in the variable
    and change -Wl,--no-undefined references in Automake.inc as well.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76856
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

targets/dri: move common libraries to GALLIUM_DRI_LIB_DEPS

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

targets/omx: use GALLIUM_COMMON_LIB_DEPS

The targets do not require expat or selinux. Use GALLIUM_COMMON_LIB_DEPS
which provides the core requirements for each gallium target.

Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

targets/xvmc: use GALLIUM_COMMON_LIB_DEPS

The targets do not require expat or selinux. Use GALLIUM_COMMON_LIB_DEPS
which provides the core requirements for each gallium target.

Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

r600/omx: drop -lstdc++ hack

The build system will use g++ to link the static library due to the
dummy.cpp source(s). Thus one does not need the explicit link against
stdc++.

Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

drivers/nouveau: mention dummy.cpp to use g++ linker

The build system does not know that the static library is C++.
Mention the cpp file to trigger generation of the proper variable
and drop the hacky stdc++ linking.

Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

drivers/nouveau: use GALLIUM_COMMON_LIB_DEPS

Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

drivers/r300: use GALLIUM_COMMON_LIB_DEPS

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76848
Tested-by: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

automake: introduce GALLIUM_COMMON_LIB_DEPS

Rather than copying the core four dependencies all over gallium,
introduce the above variable to avoid all the duplication.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76848
Tested-by: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

automake: move GALLIUM_DRI_LIB_DEPS to Automake.inc

With recent commit we started de-duplicating all of the compiler/
linker flags moving their handling inside Automake.inc.

This did not take into consideration that the above variable was set
at configure time, leading to issues on certain build combinations.

Move the variable to where it's used/handled thus cleaning up
configure.ac.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76848
Tested-by: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

configure.ac: fix the detection of expat with pkg-config

The pkg-config module was called "EXPAT" instead of "expat" in
PKG_CHECK_EXISTS. This seems to have been wrong because the wrong
argument was copied from PKG_CHECK_MODULES.

Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

megadriver_stub.c: don't use _GNU_SOURCE to gate the compat code

_GNU_SOURCE is only set/required for linux*|*-gnu*|gnu*) and as the
functionality is available on other systems check for RTLD_DEFAULT instead.

Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

loader: don't limit the non-udev path to only android

Platforms that lack libudev (OpenBSD and possibly others) need
this change in order to load the correct dri driver.
Under linux we unconditionally require libudev, thus this code
will never get build.

v2: Add commit message (Emil Velikov)

Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

loader: use 0 instead of FALSE which isn't defined

Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

clover: Document that the *obj*() helpers already take care of object validation.

i965: Mark SNB GT1 as a GT1.

brw->gt only seems to be used on gen >= 7, so this shouldn't have any
effect.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

gallium/u_blitter: implement scaled blitting in the Z direction

So that pipe->blit can be used for 3D mipmap generation.

gallium/u_blitter: don't adjust cubemap coordinates by a small number

It may cause issues with mipmap generation.
I think it was used to make some piglit tests pass on r300g.

Revert "radeon: just don't map VRAM buffers at all"

This reverts commit 96e8b916a7a39a9ba58e92d1ad77b5501de63ac7.
In the case of VCE encoding with raw YUV file, CPU load directly
to VRAM is faster than combination of CPU writing to GTT and
then blit to VRAM with GPU.

Reviewed-by: Christian König <christian.koenig@amd.com>

radeon/vce: cleanup cpb handling

v2: fix whitespace errors, minor coding style changes

Signed-off-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

st/mesa: improve sampler view handling

Keep a dynamically increasing array of all the views
created for a texture instead of just the last one.

v2: add comments, fix array size calculation,
    release only the first sampler view found

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

st/xa: Fix advertized version number and try to avoid future discrepancies

The xa version number had to be set in two places. In configure.ac and in
xa_tracker.h. Furthermore, xa_tracker.h is an installed header so we can't
use mesa internal defines. So therefore, at configure time, modify the
xa_tracker.h header to use the version given by configure.ac

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>

glapi: Fix make check

/me puts a paper bag on his head and sits in the corner.

This was supposed to be included in 5a68f731, which added
glPointSizePointerOES back to the list of functions exposed by
libGLESv1_CM.  It looks like it was an uncommitted change in my tree
when I sent the patch out.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

llvmpipe: remove no-op checks in sampler, sampler_view functions

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>

softpipe: remove no-op checks in sampler, sampler_view functions

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>

svga: remove no-op checks in sampler, sampler_view functions

We are checking for no-ops in the CSO module for both of these items
so there's no reason to do it in the driver.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>

cso: check for no sampler view changes in cso_set_sampler_views()

As we do for sampler states in single_sampler_done() and many other
CSO functions.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

docs: Add note about updating tests to dev info

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>

st/wgl: Remove wgl*Gallium*MESA().

These were only used by the Python state tracker, which was removed, hence
they have no practical use.

Reviewed-by: Brian Paul <brianp@vmware.com>

glapi: Fix scons build

Put the -c in the correct place (and match Makefile.am).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76960
Tested-by: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: José Fonseca <jfonseca@vmware.com>

glx: Do not advertise buffer_age on dri2

Previously GLX_EXT_buffer_age has always been advertised as supported because
both client_glx_support and client_glx_only where set. So it did not matter
that direct_support is only set when running dri3 and we ended up always
advertising it.

Fix that by not setting client_glx_only for buffer_age in known_glx_extensions.

Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

cso: fix sampler view count in cso_set_sampler_views()

We want to call pipe->set_sampler_views() with count being the
maximum of the old number of sampler views and the new number.
This makes sure we null-out any old sampler views.

We already do the same thing for sampler states in single_sampler_done().
Fixes some assertions seen in the VMware driver with XA tracker.

Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Tested-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

glapi: Add static dispatch for glPointSizePointerOES

The OpenGL ES 1.1 conformance tests expect this function to be
statically available form libGLESv1_CM.so.  The comment "required for
es1.1" in the XML file should have been a clue.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76926
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Lu Hua <huax.lu@intel.com>

Revert "Revert "glapi/es1: Don't mark core functions as static_dispatch=false""

This reverts commit 526e49290cd2d83fb931708a786c27647972a00c.

The original build problem should be fixed by the previous commit.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Brian Paul <brianp@vmware.com>
Tested-by: Lu Hua <huax.lu@intel.com>

glapi: Enable ES compatibility mode

Ages ago Chia-I added an ES compatibility flag to several of the various
generator scripts.  The intention was to bridge differences between ES
and desktop in Mesa builds without ES.  It doesn't appear that it has
ever been used.  Recent changes to static_dispatch status of several ES1
functions caused problems in desktop-only, non-shared-glapi builds.
Enabling the ES compatibility mode appears to fix these build problems.

This is kind of a duct tape solution to this problem.  As I mentioned in
the cover letter for the series that triggered the build problem, I
would like to make some major changes to the generator architecture and
the XML.  The whole point of the proposed architecture changes is to
better handle the differences between desktop GL and ES.  I think duct
tape is okay for now.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76869
Tested-by: Brian Paul <brianp@vmware.com>
Tested-by: Lu Hua <huax.lu@intel.com>
Cc: Vinson Lee <vlee@freedesktop.org>
Cc: Chia-I Wu <olv@lunarg.com>

glapi: Fix build break in 'make check' on non-shared-glapi builds

Commit fb78fa58 made the GL_ARB_debug_output functions aliases of the
GL_KHR_debug output functions.  As a result, the function names in
struct _glapi_table also changed.  The table in check_table.cpp used the
ARB names.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Tested-by: Brian Paul <brianp@vmware.com>
Tested-by: Lu Hua <huax.lu@intel.com>
Cc: Vinson Lee <vlee@freedesktop.org>

glapi: Remove support for "short string" mode

C89 has a fairly short minimum-maximum string length.  To support
compilers limited by the C89 limits, this script had a mode where it
would generate a character array instead of a giant string.  These were
functionally the same, but the code generated for the character array is
HUGE and difficult to read.

As far as I can tell, nothing in Mesa uses '-m short' any more.  The
generated files used to be tracked in revision control, but I think we
stopped using '-m short' when we stopped tracking the generated files.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Brian Paul <brianp@vmware.com>
Tested-by: Lu Hua <huax.lu@intel.com>
Cc: Vinson Lee <vlee@freedesktop.org>

mesa: remove redundant running of check_symbol_table()

Nested for loops running through tables against which they
finally do an assert were ran also with optimized builds.

Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: Add missing null check in _mesa_parse_arb_program()

Add missing null check in program_parse.tab.c through
program_parse.y

Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: Prevent negative indexing on noise2, noise3 and noise4

% operator could return negative value which would cause
indexing before perm table. Change %256 to &0xff

Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>