ChiYuan Huang [Wed, 29 Mar 2023 00:43:25 +0000 (08:43 +0800)]
regulator: dt-bindings: Add Richtek RT4803
Add the binding document for Richtek RT4803.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1680050606-461-1-git-send-email-cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peng Fan [Tue, 28 Mar 2023 06:00:32 +0000 (14:00 +0800)]
dt-bindings: regulator: pf8x00: Remove restrictions for regulator-name
Following commit
b0de7fa706506
("regulator: pca9450: Remove restrictions for regulator-name") to remove
the constraints on the regulator-name to allow using arbitrary and
descriptive names for the regulators.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230328060032.1983381-1-peng.fan@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Douglas Anderson [Fri, 24 Mar 2023 13:34:06 +0000 (06:34 -0700)]
regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS"
This reverts commit
58973046c1bf ("regulator: qcom-rpmh: Use
PROBE_FORCE_SYNCHRONOUS"). Further digging into the problems that
prompted the us to switch to synchronous probe showed that the root
cause was a missing "rootwait" in the kernel command line
arguments. Let's reinstate asynchronous probe.
Fixes:
58973046c1bf ("regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS")
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230324063357.1.Ifdf3625a3c5c9467bd87bfcdf726c884ad220a35@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Marek Szyprowski [Thu, 23 Mar 2023 22:05:18 +0000 (23:05 +0100)]
regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS
Restore synchronous probing for 'qcom,pm8150-rpmh-regulators' because
otherwise the UFSHC device is not properly initialized on QRB5165-RB5
board.
Fixes:
ed6962cc3e05 ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers between 4.14 and 4.19")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230323220518.3247530-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Thu, 23 Mar 2023 13:20:47 +0000 (13:20 +0000)]
regulator: arizona-micsupp: Use PROBE_FORCE_SYNCHRONOUS
Restore synchronous probing for Arizona regulators as the main MFD
relies on the ordering of the devices probing.
As these regulators are built into the CODEC and typically have no DT
representation the regulator framework is unaware of their existence
until the driver probes. These means the probing of the driver needs to
be synchronous to ensure the regulators are not substitued for the dummy
later when the users request them.
Fixes:
259b93b21a9f ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230323132047.833737-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Thu, 23 Mar 2023 13:20:46 +0000 (13:20 +0000)]
regulator: arizona-ldo1: Use PROBE_FORCE_SYNCHRONOUS
Restore synchronous probing for Arizona regulators because otherwise
the main MFD driver will not find its core supplies.
As these regulators are built into the CODEC and typically have no DT
representation the regulator framework is unaware of their existence
until the driver probes. These means the probing of the driver needs to
be synchronous to ensure the regulators are not substitued for the dummy
later when the users request them.
Fixes:
259b93b21a9f ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230323132047.833737-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Marek Szyprowski [Thu, 23 Mar 2023 08:33:12 +0000 (09:33 +0100)]
regulator: wm8994: Use PROBE_FORCE_SYNCHRONOUS
Restore synchronous probing for wm8994 regulators because otherwise the
sound device is never initialized on Exynos5250-based Arndale board.
Fixes:
259b93b21a9f ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230323083312.199189-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Mon, 20 Mar 2023 19:00:53 +0000 (19:00 +0000)]
regulator: Set PROBE_PREFER_ASYNCHRONOUS for
Merge series from Douglas Anderson <dianders@chromium.org>:
This series directly follows from the discussion when I tried to turn
on PROBE_PREFER_ASYNCHRONOUS just for the fixed-regulator [1] and
attempts to switch everything in drivers/regulator over to async
probe.
Like the similar patch series I did for the MMC subsystem a few years
ago [2], I've split this patch series into batches corresponding to
drivers corresponding to actively maintained stable kernel trees with
the idea to break the patch series up somewhat.
Most of the description of this series is contained in the first patch
of the series and then the further patches simply refer back to the
first one. The logic and reasoning behind all the patches is exactly
the same.
As talked about in the first patch, it wouldn't be at all shocking if
this broke someone. Hopefully this doesn't cause too much of a
problem. Most of the problems expected would be real underlying bugs
that already existed and were just tickled by this change. If you're
facing a problem, it's fairly easy to force individual drivers back to
"synchronous" probing while the problem is tracked down and fixed.
I am opting _not_ to CC every single person involved in each of these
regulators on this patch series because I suspect that the mailing
lists couldn't handle CCing that many people. This should be on LKML
so hopefully people can find it there and respond to it that
way. Anyone who responds will get CCed on future versions, if there
are any.
For reference, the ugly script I used is here:
import os
import re
for filename in os.listdir("."):
found_subsys = False
found_driver = False
output = []
for line in open(filename, "r").readlines():
if "struct platform_driver" in line or \
"struct i2c_driver" in line or \
"struct spmi_driver" in line or \
"struct spi_driver" in line:
found_subsys = True
if found_subsys and re.search(r"\t\.driver\s*=\s*{", line):
found_driver = True
found_subsys = False
mo = re.search(r"(\s*)\.name(\s*)=", line)
if found_driver and mo:
if not line.endswith(",\n"):
line = line[:-1] + ",\n"
output.append(line)
if mo.group(2) == " ":
space = " "
elif mo.group(2) == "\t":
# Best we can do
space = " "
elif mo.group(2).startswith("\t"):
# Guess that removing one tab is right
space = mo.group(2)[1:]
else:
# Guess it's all spaces
space = mo.group(2)[7:] + " "
output.append("%s.probe_type%s= PROBE_PREFER_ASYNCHRONOUS,\n" % (mo.group(1), space))
found_driver = False
else:
output.append(line)
open(filename, "w").write("".join(output))
I manually split drivers up into groups based on the kernel they were
introduced in.
I've run a compile test against "allyesconfig" on amd64, arm32, and
arm64 with this and confirmed it compiled. I've booted this on a
sc7180-trogdor-lazor board and confirmed it booted OK and got the boot
speed improvements I expected and that dmesg was as expected.
[1] https://lore.kernel.org/r/
06db017f-e985-4434-8d1d-
02ca2100cca0@sirena.org.uk
[2] https://lore.kernel.org/r/
20200903232441.2694866-1-dianders@chromium.org/
Douglas Anderson (7):
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in
4.14
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers between 4.14 and
4.19
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers between 4.19 and
5.4
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers between 5.4 and
5.10
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers between 5.10 and
5.15
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers between 5.15 and
6.1
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that are newer
than 6.1
drivers/regulator/88pg86x.c | 1 +
drivers/regulator/88pm800-regulator.c | 1 +
drivers/regulator/88pm8607.c | 1 +
drivers/regulator/aat2870-regulator.c | 1 +
drivers/regulator/ab8500-ext.c | 1 +
drivers/regulator/ab8500.c | 1 +
drivers/regulator/act8865-regulator.c | 1 +
drivers/regulator/act8945a-regulator.c | 1 +
drivers/regulator/ad5398.c | 1 +
drivers/regulator/anatop-regulator.c | 1 +
drivers/regulator/arizona-ldo1.c | 2 ++
drivers/regulator/arizona-micsupp.c | 2 ++
drivers/regulator/as3711-regulator.c | 1 +
drivers/regulator/as3722-regulator.c | 1 +
drivers/regulator/atc260x-regulator.c | 1 +
drivers/regulator/axp20x-regulator.c | 1 +
drivers/regulator/bcm590xx-regulator.c | 1 +
drivers/regulator/bd71815-regulator.c | 1 +
drivers/regulator/bd71828-regulator.c | 3 ++-
drivers/regulator/bd718x7-regulator.c | 1 +
drivers/regulator/bd9571mwv-regulator.c | 1 +
drivers/regulator/bd9576-regulator.c | 1 +
drivers/regulator/cpcap-regulator.c | 1 +
drivers/regulator/cros-ec-regulator.c | 1 +
drivers/regulator/da903x-regulator.c | 1 +
drivers/regulator/da9052-regulator.c | 1 +
drivers/regulator/da9055-regulator.c | 1 +
drivers/regulator/da9062-regulator.c | 1 +
drivers/regulator/da9063-regulator.c | 1 +
drivers/regulator/da9121-regulator.c | 1 +
drivers/regulator/da9210-regulator.c | 1 +
drivers/regulator/da9211-regulator.c | 1 +
drivers/regulator/db8500-prcmu.c | 1 +
drivers/regulator/dummy.c | 1 +
drivers/regulator/fan53555.c | 1 +
drivers/regulator/fan53880.c | 1 +
drivers/regulator/fixed.c | 1 +
drivers/regulator/gpio-regulator.c | 1 +
drivers/regulator/hi6421-regulator.c | 1 +
drivers/regulator/hi6421v530-regulator.c | 1 +
drivers/regulator/hi6421v600-regulator.c | 1 +
drivers/regulator/hi655x-regulator.c | 1 +
drivers/regulator/isl6271a-regulator.c | 1 +
drivers/regulator/isl9305.c | 1 +
drivers/regulator/lm363x-regulator.c | 1 +
drivers/regulator/lochnagar-regulator.c | 1 +
drivers/regulator/lp3971.c | 1 +
drivers/regulator/lp3972.c | 1 +
drivers/regulator/lp872x.c | 1 +
drivers/regulator/lp873x-regulator.c | 1 +
drivers/regulator/lp8755.c | 1 +
drivers/regulator/lp87565-regulator.c | 1 +
drivers/regulator/lp8788-buck.c | 1 +
drivers/regulator/lp8788-ldo.c | 2 ++
drivers/regulator/ltc3589.c | 1 +
drivers/regulator/ltc3676.c | 1 +
drivers/regulator/max14577-regulator.c | 1 +
drivers/regulator/max1586.c | 1 +
drivers/regulator/max20086-regulator.c | 1 +
drivers/regulator/max20411-regulator.c | 1 +
drivers/regulator/max597x-regulator.c | 1 +
drivers/regulator/max77620-regulator.c | 1 +
drivers/regulator/max77650-regulator.c | 1 +
drivers/regulator/max77686-regulator.c | 1 +
drivers/regulator/max77693-regulator.c | 1 +
drivers/regulator/max77802-regulator.c | 1 +
drivers/regulator/max77826-regulator.c | 1 +
drivers/regulator/max8649.c | 1 +
drivers/regulator/max8660.c | 1 +
drivers/regulator/max8893.c | 1 +
drivers/regulator/max8907-regulator.c | 1 +
drivers/regulator/max8925-regulator.c | 1 +
drivers/regulator/max8952.c | 1 +
drivers/regulator/max8973-regulator.c | 1 +
drivers/regulator/max8997-regulator.c | 1 +
drivers/regulator/max8998.c | 1 +
drivers/regulator/mc13783-regulator.c | 1 +
drivers/regulator/mc13892-regulator.c | 1 +
drivers/regulator/mcp16502.c | 1 +
drivers/regulator/mp5416.c | 1 +
drivers/regulator/mp8859.c | 1 +
drivers/regulator/mp886x.c | 1 +
drivers/regulator/mpq7920.c | 1 +
drivers/regulator/mt6311-regulator.c | 1 +
drivers/regulator/mt6315-regulator.c | 1 +
drivers/regulator/mt6323-regulator.c | 1 +
drivers/regulator/mt6331-regulator.c | 1 +
drivers/regulator/mt6332-regulator.c | 1 +
drivers/regulator/mt6357-regulator.c | 1 +
drivers/regulator/mt6358-regulator.c | 1 +
drivers/regulator/mt6359-regulator.c | 1 +
drivers/regulator/mt6360-regulator.c | 1 +
drivers/regulator/mt6370-regulator.c | 1 +
drivers/regulator/mt6380-regulator.c | 1 +
drivers/regulator/mt6397-regulator.c | 1 +
drivers/regulator/mtk-dvfsrc-regulator.c | 1 +
drivers/regulator/palmas-regulator.c | 1 +
drivers/regulator/pbias-regulator.c | 1 +
drivers/regulator/pca9450-regulator.c | 1 +
drivers/regulator/pcap-regulator.c | 1 +
drivers/regulator/pcf50633-regulator.c | 1 +
drivers/regulator/pf8x00-regulator.c | 1 +
drivers/regulator/pfuze100-regulator.c | 1 +
drivers/regulator/pv88060-regulator.c | 1 +
drivers/regulator/pv88080-regulator.c | 1 +
drivers/regulator/pv88090-regulator.c | 1 +
drivers/regulator/pwm-regulator.c | 1 +
drivers/regulator/qcom-labibb-regulator.c | 1 +
drivers/regulator/qcom-rpmh-regulator.c | 1 +
drivers/regulator/qcom_rpm-regulator.c | 1 +
drivers/regulator/qcom_smd-regulator.c | 1 +
drivers/regulator/qcom_spmi-regulator.c | 1 +
drivers/regulator/qcom_usb_vbus-regulator.c | 1 +
drivers/regulator/rc5t583-regulator.c | 1 +
drivers/regulator/rk808-regulator.c | 3 ++-
drivers/regulator/rn5t618-regulator.c | 1 +
drivers/regulator/rpi-panel-attiny-regulator.c | 1 +
drivers/regulator/rt4801-regulator.c | 1 +
drivers/regulator/rt4831-regulator.c | 1 +
drivers/regulator/rt5033-regulator.c | 1 +
drivers/regulator/rt5120-regulator.c | 1 +
drivers/regulator/rt5190a-regulator.c | 1 +
drivers/regulator/rt5739.c | 1 +
drivers/regulator/rt5759-regulator.c | 1 +
drivers/regulator/rt6160-regulator.c | 1 +
drivers/regulator/rt6190-regulator.c | 1 +
drivers/regulator/rt6245-regulator.c | 1 +
drivers/regulator/rtmv20-regulator.c | 1 +
drivers/regulator/rtq2134-regulator.c | 1 +
drivers/regulator/rtq6752-regulator.c | 1 +
drivers/regulator/s2mpa01.c | 1 +
drivers/regulator/s2mps11.c | 1 +
drivers/regulator/s5m8767.c | 1 +
drivers/regulator/sc2731-regulator.c | 1 +
drivers/regulator/sky81452-regulator.c | 1 +
drivers/regulator/slg51000-regulator.c | 1 +
drivers/regulator/sm5703-regulator.c | 1 +
drivers/regulator/stm32-booster.c | 1 +
drivers/regulator/stm32-pwr.c | 1 +
drivers/regulator/stm32-vrefbuf.c | 1 +
drivers/regulator/stpmic1_regulator.c | 1 +
drivers/regulator/stw481x-vmmc.c | 1 +
drivers/regulator/sy7636a-regulator.c | 1 +
drivers/regulator/sy8106a-regulator.c | 1 +
drivers/regulator/sy8824x.c | 1 +
drivers/regulator/sy8827n.c | 1 +
drivers/regulator/ti-abb-regulator.c | 1 +
drivers/regulator/tps51632-regulator.c | 1 +
drivers/regulator/tps6105x-regulator.c | 1 +
drivers/regulator/tps62360-regulator.c | 1 +
drivers/regulator/tps6286x-regulator.c | 1 +
drivers/regulator/tps65023-regulator.c | 1 +
drivers/regulator/tps6507x-regulator.c | 1 +
drivers/regulator/tps65086-regulator.c | 1 +
drivers/regulator/tps65090-regulator.c | 1 +
drivers/regulator/tps65132-regulator.c | 1 +
drivers/regulator/tps65217-regulator.c | 1 +
drivers/regulator/tps65218-regulator.c | 1 +
drivers/regulator/tps65219-regulator.c | 1 +
drivers/regulator/tps6524x-regulator.c | 1 +
drivers/regulator/tps6586x-regulator.c | 1 +
drivers/regulator/tps65910-regulator.c | 1 +
drivers/regulator/tps65912-regulator.c | 1 +
drivers/regulator/tps68470-regulator.c | 1 +
drivers/regulator/twl-regulator.c | 1 +
drivers/regulator/twl6030-regulator.c | 1 +
drivers/regulator/uniphier-regulator.c | 1 +
drivers/regulator/userspace-consumer.c | 1 +
drivers/regulator/vctrl-regulator.c | 1 +
drivers/regulator/vexpress-regulator.c | 1 +
drivers/regulator/virtual.c | 1 +
drivers/regulator/vqmmc-ipq4019-regulator.c | 1 +
drivers/regulator/wm831x-dcdc.c | 4 ++++
drivers/regulator/wm831x-isink.c | 1 +
drivers/regulator/wm831x-ldo.c | 3 +++
drivers/regulator/wm8350-regulator.c | 1 +
drivers/regulator/wm8400-regulator.c | 1 +
drivers/regulator/wm8994-regulator.c | 1 +
178 files changed, 188 insertions(+), 2 deletions(-)
--
2.40.0.rc1.284.g88254d51c5-goog
Rob Herring [Fri, 17 Mar 2023 23:36:14 +0000 (18:36 -0500)]
regulator: dt-bindings: Drop unneeded quotes
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230317233616.3968003-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Douglas Anderson [Thu, 16 Mar 2023 19:54:44 +0000 (12:54 -0700)]
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that are newer than 6.1
This follows on the change ("regulator: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in 4.14") but changes regulators that were
not present in kernel 6.1.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230316125351.7.I31771918f1d8dbe4bfb9f1fef7ff987f2b7504b5@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Douglas Anderson [Thu, 16 Mar 2023 19:54:43 +0000 (12:54 -0700)]
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers between 5.15 and 6.1
This follows on the change ("regulator: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in 4.14") but changes regulators didn't exist
in Linux 5.15 but did exist in Linux 6.1.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230316125351.6.Ibc8a86ddd5055ebbbe487a529199db7b36ccad1a@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Douglas Anderson [Thu, 16 Mar 2023 19:54:42 +0000 (12:54 -0700)]
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers between 5.10 and 5.15
This follows on the change ("regulator: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in 4.14") but changes regulators didn't exist
in Linux 5.10 but did exist in Linux 5.15.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230316125351.5.Ia0e6d859bdfe42ea5c187fb1eb4705c1b5ea23a1@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Douglas Anderson [Thu, 16 Mar 2023 19:54:41 +0000 (12:54 -0700)]
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers between 5.4 and 5.10
This follows on the change ("regulator: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in 4.14") but changes regulators didn't exist
in Linux 5.4 but did exist in Linux 5.10.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230316125351.4.I01f21c98901641a009890590ddc1354c0f294e5e@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Douglas Anderson [Thu, 16 Mar 2023 19:54:40 +0000 (12:54 -0700)]
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers between 4.19 and 5.4
This follows on the change ("regulator: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in 4.14") but changes regulators didn't exist
in Linux 4.19 but did exist in Linux 5.4.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230316125351.3.I45bf925ca9537da5f647e2acb0ad207c0c98af81@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Douglas Anderson [Thu, 16 Mar 2023 19:54:39 +0000 (12:54 -0700)]
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers between 4.14 and 4.19
This follows on the change ("regulator: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in 4.14") but changes regulators didn't exist
in Linux 4.14 but did exist in Linux 4.19.
NOTE: from a quick "git cherry-pick" it looks as if
"bd718x7-regulator.c" didn't actually exist in v4.19. In 4.19 it was
named "bd71837-regulator.c". See commit
2ece646c90c5 ("regulator:
bd718xx: rename bd71837 to 718xx")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230316125351.2.Iad1f25517bb46a6c7fca8d8c80ed4fc258a79ed9@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Douglas Anderson [Thu, 16 Mar 2023 19:54:38 +0000 (12:54 -0700)]
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14
Probing of regulators can be a slow operation and can contribute to
slower boot times. This is especially true if a regulator is turned on
at probe time (with regulator-boot-on or regulator-always-on) and the
regulator requires delays (off-on-time, ramp time, etc).
While the overall kernel is not ready to switch to async probe by
default, as per the discussion on the mailing lists [1] it is believed
that the regulator subsystem is in good shape and we can move
regulator drivers over wholesale. There is no way to just magically
opt in all regulators (regulators are just normal drivers like
platform_driver), so we set PROBE_PREFER_ASYNCHRONOUS for all
regulators found in 'drivers/regulator' individually.
Given the number of drivers touched and the impossibility to test this
ahead of time, it wouldn't be shocking at all if this caused a
regression for someone. If there is a regression caused by this patch,
it's likely to be one of the cases talked about in [1]. As a "quick
fix", drivers involved in the regression could be fixed by changing
them to PROBE_FORCE_SYNCHRONOUS. That being said, the correct fix
would be to directly fix the problem that caused the issue with async
probe.
The approach here follows a similar approach that was used for the mmc
subsystem several years ago [2]. In fact, I ran nearly the same python
script to auto-generate the changes. The only thing I changed was to
search for "i2c_driver", "spmi_driver", and "spi_driver" in addition
to "platform_driver".
[1] https://lore.kernel.org/r/
06db017f-e985-4434-8d1d-
02ca2100cca0@sirena.org.uk
[2] https://lore.kernel.org/r/
20200903232441.2694866-1-dianders@chromium.org/
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230316125351.1.I2a4677392a38db5758dee0788b2cea5872562a82@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Douglas Anderson [Mon, 13 Mar 2023 18:18:19 +0000 (11:18 -0700)]
regulator: core: Shorten off-on-delay-us for always-on/boot-on by time since booted
This is very close to a straight revert of commit
218320fec294
("regulator: core: Fix off-on-delay-us for always-on/boot-on
regulators"). We've identified that patch as causing a boot speed
regression on sc7180-trogdor boards. While boot speed certainly isn't
more important than making sure that power sequencing is correct,
looking closely at the original change it doesn't seem to have been
fully justified. It mentions "cycling issues" without describing
exactly what the issues were. That means it's possible that the
cycling issues were really a problem that should be fixed in a
different way.
Let's take a careful look at how we should handle regulators that have
an off-on-delay and that are boot-on or always-on. Linux currently
doesn't have any way to identify whether a GPIO regulator was already
on when the kernel booted. That means that when the kernel boots we
probe a regulator, see that it wants boot-on / always-on we, and then
turn the regulator on. We could be in one of two cases when we do
this:
a) The regulator might have been left on by the bootloader and we're
ensuring that it stays on.
b) The regulator might have been left off by the bootloader and we're
just now turning it on.
For case a) we definitely don't need any sort of delay. For case b) we
_might_ need some delay in case the bootloader turned the regulator
off _right_ before booting the kernel. To get the proper delay for
case b) then we can just assume a `last_off` of 0, which is what it
gets initialized to by default.
As per above, we can't tell whether we're in case a) or case b) so
we'll assume the longer delay (case b). This basically puts the code
to how it was before commit
218320fec294 ("regulator: core: Fix
off-on-delay-us for always-on/boot-on regulators"). However, we add
one important change: we make sure that the delay is actually honored
if `last_off` is 0. Though the original "cycling issues" cited were
vague, I'm hopeful that this important extra change will be enough to
fix the issues that the initial commit mentioned.
With this fix, I've confined that on a sc7180-trogdor board the delay
at boot goes down from 500 ms to ~250 ms. That's not as good as the 0
ms that we had prior to commit
218320fec294 ("regulator: core: Fix
off-on-delay-us for always-on/boot-on regulators"), but it's probably
safer because we don't know if the bootloader turned the regulator off
right before booting.
One note is that it's possible that we could be in a state that's not
a) or b) if there are other issues in the kernel. The only one I can
think of is related to pinctrl. If the pinctrl driver being used on a
board isn't careful about avoiding glitches when setting up a pin then
it's possible that setting up a pin could cause the regulator to "turn
off" briefly immediately before the regulator probes. If this is
indeed causing problems then the pinctrl driver should be fixed,
perhaps in a similar way to what was done in commit
d21f4b7ffc22
("pinctrl: qcom: Avoid glitching lines when we first mux to output")
Fixes:
218320fec294 ("regulator: core: Fix off-on-delay-us for always-on/boot-on regulators")
Cc: Christian Kohlschütter <christian@kohlschutter.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230313111806.1.I2eaad872be0932a805c239a7c7a102233fb0b03b@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Krzysztof Kozlowski [Fri, 10 Mar 2023 21:45:48 +0000 (22:45 +0100)]
regulator: mt6397-regulator: Mark OF related data as maybe unused
The driver can be compile tested with !CONFIG_OF making certain data
unused:
drivers/regulator/mt6397-regulator.c:400:34: error: ‘mt6397_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230310214553.275450-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Krzysztof Kozlowski [Fri, 10 Mar 2023 21:45:47 +0000 (22:45 +0100)]
regulator: mp8859: Mark OF related data as maybe unused
The driver can be compile tested with !CONFIG_OF making certain data
unused:
drivers/regulator/mp8859.c:132:34: error: ‘mp8859_dt_id’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230310214553.275450-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Krzysztof Kozlowski [Fri, 10 Mar 2023 21:45:46 +0000 (22:45 +0100)]
regulator: max20086: Mark OF related data as maybe unused
The driver can be compile tested with !CONFIG_OF making certain data
unused:
drivers/regulator/max20086-regulator.c:289:34: error: ‘max20086_dt_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20230310214553.275450-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Krzysztof Kozlowski [Fri, 10 Mar 2023 21:45:45 +0000 (22:45 +0100)]
regulator: lp872x: Mark OF related data as maybe unused
The driver can be compile tested with !CONFIG_OF making certain data
unused:
drivers/regulator/lp872x.c:931:34: error: ‘lp872x_dt_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230310214553.275450-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Mon, 13 Mar 2023 13:20:45 +0000 (13:20 +0000)]
Merge tag 'v6.3-rc2' into regulator-6.4 to fix clock related boot issues
Linux 6.3-rc2
Linus Torvalds [Sun, 12 Mar 2023 23:36:44 +0000 (16:36 -0700)]
Linux 6.3-rc2
Hector Martin [Sat, 11 Mar 2023 14:19:14 +0000 (23:19 +0900)]
wifi: cfg80211: Partial revert "wifi: cfg80211: Fix use after free for wext"
This reverts part of commit
015b8cc5e7c4 ("wifi: cfg80211: Fix use after
free for wext")
This commit broke WPA offload by unconditionally clearing the crypto
modes for non-WEP connections. Drop that part of the patch.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reported-by: Ilya <me@0upti.me>
Reported-and-tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Fixes:
015b8cc5e7c4 ("wifi: cfg80211: Fix use after free for wext")
Cc: stable@kernel.org
Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edf
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 12 Mar 2023 23:15:36 +0000 (16:15 -0700)]
Merge tag 'tpm-v6.3-rc3' of git://git./linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Two additional bug fixes for v6.3"
* tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: disable hwrng for fTPM on some AMD designs
tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
Mario Limonciello [Tue, 28 Feb 2023 02:44:39 +0000 (20:44 -0600)]
tpm: disable hwrng for fTPM on some AMD designs
AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS. This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.
This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit
b006c439d58db ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.
So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions. As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.
It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.
Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it. If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.
Link: https://www.amd.com/en/support/kb/faq/pa-410
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989
Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/
Fixes:
b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources")
Cc: stable@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Tested-by: reach622@mailcuk.com
Tested-by: Bell <1138267643@qq.com>
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Morten Linderud [Wed, 15 Feb 2023 09:25:52 +0000 (10:25 +0100)]
tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.
Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.
The following hardware was used to test this issue:
Framework Laptop (Pre-production)
BIOS: INSYDE Corp, Revision: 3.2
TPM Device: NTC, Firmware Revision: 7.2
Dump of the faulty ACPI TPM2 table:
[000h 0000 4] Signature : "TPM2" [Trusted Platform Module hardware interface Table]
[004h 0004 4] Table Length :
0000004C
[008h 0008 1] Revision : 04
[009h 0009 1] Checksum : 2B
[00Ah 0010 6] Oem ID : "INSYDE"
[010h 0016 8] Oem Table ID : "TGL-ULT"
[018h 0024 4] Oem Revision :
00000002
[01Ch 0028 4] Asl Compiler ID : "ACPI"
[020h 0032 4] Asl Compiler Revision :
00040000
[024h 0036 2] Platform Class : 0000
[026h 0038 2] Reserved : 0000
[028h 0040 8] Control Address :
0000000000000000
[030h 0048 4] Start Method : 06 [Memory Mapped I/O]
[034h 0052 12] Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00
[040h 0064 4] Minimum Log Length :
00010000
[044h 0068 8] Log Address :
000000004053D000
Fixes:
0cf577a03f21 ("tpm: Fix handling of missing event log")
Tested-by: Erkki Eilonen <erkki@bearmetal.eu>
Signed-off-by: Morten Linderud <morten@linderud.pw>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Linus Torvalds [Sun, 12 Mar 2023 16:47:08 +0000 (09:47 -0700)]
Merge tag 'xfs-6.3-fixes-1' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- Fix a crash if mount time quotacheck fails when there are inodes
queued for garbage collection.
- Fix an off by one error when discarding folios after writeback
failure.
* tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix off-by-one-block in xfs_discard_folio()
xfs: quotacheck failure can race with background inode inactivation
Linus Torvalds [Sun, 12 Mar 2023 16:17:30 +0000 (09:17 -0700)]
Merge tag 'staging-6.3-rc2' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fixes and removal from Greg KH:
"Here are four small staging driver fixes, and one big staging driver
deletion for 6.3-rc2.
The fixes are:
- rtl8192e driver fixes for where the driver was attempting to
execute various programs directly from the disk for unknown reasons
- rtl8723bs driver fixes for issues found by Hans in testing
The deleted driver is the removal of the r8188eu wireless driver as
now in 6.3-rc1 we have a "real" wifi driver for one that includes
support for many many more devices than this old driver did. So it's
time to remove it as it is no longer needed. The maintainers of this
driver all have acked its removal. Many thanks to them over the years
for working to clean it up and keep it working while the real driver
was being developed.
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: delete driver
staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
staging: rtl8723bs: Fix key-store index handling
staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script
Linus Torvalds [Sun, 12 Mar 2023 16:12:03 +0000 (09:12 -0700)]
Merge tag 'x86_urgent_for_v6.3_rc2' of git://git./linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"A single erratum fix for AMD machines:
- Disable XSAVES on AMD Zen1 and Zen2 machines due to an erratum. No
impact to anything as those machines will fallback to XSAVEC which
is equivalent there"
* tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Disable XSAVES on AMD family 0x17
Linus Torvalds [Sun, 12 Mar 2023 16:04:28 +0000 (09:04 -0700)]
Merge tag 'kernel.fork.v6.3-rc2' of gitolite.pub/scm/linux/kernel/git/brauner/linux
Pull clone3 fix from Christian Brauner:
"A simple fix for the clone3() system call.
The CLONE_NEWTIME allows the creation of time namespaces. The flag
reuses a bit from the CSIGNAL bits that are used in the legacy clone()
system call to set the signal that gets sent to the parent after the
child exits.
The clone3() system call doesn't rely on CSIGNAL anymore as it uses a
dedicated .exit_signal field in struct clone_args. So we blocked all
CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced
and reused a CSIGNAL bit we forgot to adapt clone3_args_valid()
causing CLONE_NEWTIME with clone3() to be rejected. Fix this"
* tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
selftests/clone3: test clone3 with CLONE_NEWTIME
fork: allow CLONE_NEWTIME in clone3 flags
Linus Torvalds [Sun, 12 Mar 2023 16:00:54 +0000 (09:00 -0700)]
Merge tag 'vfs.misc.v6.3-rc2' of git://git./linux/kernel/git/vfs/idmapping
Pull vfs fixes from Christian Brauner:
- When allocating pages for a watch queue failed, we didn't return an
error causing userspace to proceed even though all subsequent
notifcations would be lost. Make sure to return an error.
- Fix a misformed tree entry for the idmapping maintainers entry.
- When setting file leases from an idmapped mount via
generic_setlease() we need to take the idmapping into account
otherwise taking a lease would fail from an idmapped mount.
- Remove two redundant assignments, one in splice code and the other in
locks code, that static checkers complained about.
* tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
filelocks: use mount idmapping for setlease permission check
fs/locks: Remove redundant assignment to cmd
splice: Remove redundant assignment to ret
MAINTAINERS: repair a malformed T: entry in IDMAPPED MOUNTS
watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths
Linus Torvalds [Sun, 12 Mar 2023 15:55:55 +0000 (08:55 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug fixes and regressions for ext4, the most serious of which is a
potential deadlock during directory renames that was introduced during
the merge window discovered by a combination of syzbot and lockdep"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: zero i_disksize when initializing the bootloader inode
ext4: make sure fs error flag setted before clear journal error
ext4: commit super block if fs record error when journal record without error
ext4, jbd2: add an optimized bmap for the journal inode
ext4: fix WARNING in ext4_update_inline_data
ext4: move where set the MAY_INLINE_DATA flag is set
ext4: Fix deadlock during directory rename
ext4: Fix comment about the 64BIT feature
docs: ext4: modify the group desc size to 64
ext4: fix another off-by-one fsmap error on 1k block filesystems
ext4: fix RENAME_WHITEOUT handling for inline directories
ext4: make kobj_type structures constant
ext4: fix cgroup writeback accounting with fs-layer encryption
Linus Torvalds [Sun, 12 Mar 2023 15:52:03 +0000 (08:52 -0700)]
cpumask: relax sanity checking constraints
The cpumask_check() was unnecessarily tight, and causes problems for the
users of cpumask_next().
We have a number of users that take the previous return value of one of
the bit scanning functions and subtract one to keep it in "range". But
since the scanning functions end up returning up to 'small_cpumask_bits'
instead of the tighter 'nr_cpumask_bits', the range really needs to be
using that widened form.
[ This "previous-1" behavior is also the reason we have all those
comments about /* -1 is a legal arg here. */ and separate checks for
that being ok. So we could have just made "small_cpumask_bits-1"
be a similar special "don't check this" value.
Tetsuo Handa even suggested a patch that only does that for
cpumask_next(), since that seems to be the only actual case that
triggers, but that all makes it even _more_ magical and special. So
just relax the check ]
One example of this kind of pattern being the 'c_start()' function in
arch/x86/kernel/cpu/proc.c, but also duplicated in various forms on
other architectures.
Reported-by: syzbot+96cae094d90877641f32@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=96cae094d90877641f32
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Link: https://lore.kernel.org/lkml/c1f4cc16-feea-b83c-82cf-1a1f007b7eb9@I-love.SAKURA.ne.jp/
Fixes:
596ff4a09b89 ("cpumask: re-introduce constant-sized cpumask optimizations")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 11 Mar 2023 17:24:05 +0000 (09:24 -0800)]
Merge tag 'i2c-for-6.3-rc2' of git://git./linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This marks the end of a transition to let I2C have the same probe
semantics as other subsystems. Uwe took care that no drivers in the
current tree nor in -next use the deprecated .probe call. So, it is a
good time to switch to the new, standard semantics now.
There is also a regression fix:
- regression fix for the notifier handling of the I2C core
- final coversions of drivers away from deprecated .probe
- make .probe_new the standard probe and convert I2C core to use it
* tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: dev: Fix bus callback return values
i2c: Convert drivers to new .probe() callback
i2c: mux: Convert all drivers to new .probe() callback
i2c: Switch .probe() to not take an id parameter
media: i2c: ov2685: convert to i2c's .probe_new()
media: i2c: ov5695: convert to i2c's .probe_new()
w1: ds2482: Convert to i2c's .probe_new()
serial: sc16is7xx: Convert to i2c's .probe_new()
mtd: maps: pismo: Convert to i2c's .probe_new()
misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
Richard Weinberger [Sat, 11 Mar 2023 09:29:29 +0000 (10:29 +0100)]
ubi: block: Fix missing blk_mq_end_request
Switching to BLK_MQ_F_BLOCKING wrongly removed the call to
blk_mq_end_request(). Add it back to have our IOs finished
Fixes:
91cc8fbcc8c7 ("ubi: block: set BLK_MQ_F_BLOCKING")
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/linux-mtd/CAHk-=wi29bbBNh3RqJKu3PxzpjDN5D5K17gEVtXrb7-6bfrnMQ@mail.gmail.com/
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rob Herring [Fri, 10 Mar 2023 14:47:22 +0000 (08:47 -0600)]
regulator: Use of_property_read_bool() for boolean properties
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144722.1544843-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Rob Herring [Fri, 10 Mar 2023 14:47:21 +0000 (08:47 -0600)]
regulator: Use of_property_present() for testing DT property presence
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144721.1544756-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Zhihao Cheng [Wed, 8 Mar 2023 03:26:43 +0000 (11:26 +0800)]
ext4: zero i_disksize when initializing the bootloader inode
If the boot loader inode has never been used before, the
EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the
i_size to 0. However, if the "never before used" boot loader has a
non-zero i_size, then i_disksize will be non-zero, and the
inconsistency between i_size and i_disksize can trigger a kernel
warning:
WARNING: CPU: 0 PID: 2580 at fs/ext4/file.c:319
CPU: 0 PID: 2580 Comm: bb Not tainted 6.3.0-rc1-00004-g703695902cfa
RIP: 0010:ext4_file_write_iter+0xbc7/0xd10
Call Trace:
vfs_write+0x3b1/0x5c0
ksys_write+0x77/0x160
__x64_sys_write+0x22/0x30
do_syscall_64+0x39/0x80
Reproducer:
1. create corrupted image and mount it:
mke2fs -t ext4 /tmp/foo.img 200
debugfs -wR "sif <5> size 25700" /tmp/foo.img
mount -t ext4 /tmp/foo.img /mnt
cd /mnt
echo 123 > file
2. Run the reproducer program:
posix_memalign(&buf, 1024, 1024)
fd = open("file", O_RDWR | O_DIRECT);
ioctl(fd, EXT4_IOC_SWAP_BOOT);
write(fd, buf, 1024);
Fix this by setting i_disksize as well as i_size to zero when
initiaizing the boot loader inode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217159
Cc: stable@kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20230308032643.641113-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ye Bin [Tue, 7 Mar 2023 06:17:03 +0000 (14:17 +0800)]
ext4: make sure fs error flag setted before clear journal error
Now, jounral error number maybe cleared even though ext4_commit_super()
failed. This may lead to error flag miss, then fsck will miss to check
file system deeply.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307061703.245965-3-yebin@huaweicloud.com
Ye Bin [Tue, 7 Mar 2023 06:17:02 +0000 (14:17 +0800)]
ext4: commit super block if fs record error when journal record without error
Now, 'es->s_state' maybe covered by recover journal. And journal errno
maybe not recorded in journal sb as IO error. ext4_update_super() only
update error information when 'sbi->s_add_error_count' large than zero.
Then 'EXT4_ERROR_FS' flag maybe lost.
To solve above issue just recover 'es->s_state' error flag after journal
replay like error info.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307061703.245965-2-yebin@huaweicloud.com
Theodore Ts'o [Wed, 8 Mar 2023 04:15:49 +0000 (23:15 -0500)]
ext4, jbd2: add an optimized bmap for the journal inode
The generic bmap() function exported by the VFS takes locks and does
checks that are not necessary for the journal inode. So allow the
file system to set a journal-optimized bmap function in
journal->j_bmap.
Reported-by: syzbot+9543479984ae9e576000@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=e4aaa78795e490421c79f76ec3679006c8ff4cf0
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ye Bin [Tue, 7 Mar 2023 01:52:53 +0000 (09:52 +0800)]
ext4: fix WARNING in ext4_update_inline_data
Syzbot found the following issue:
EXT4-fs (loop0): mounted filesystem
00000000-0000-0000-0000-
000000000000 without journal. Quota mode: none.
fscrypt: AES-256-CTS-CBC using implementation "cts-cbc-aes-aesni"
fscrypt: AES-256-XTS using implementation "xts-aes-aesni"
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5071 at mm/page_alloc.c:5525 __alloc_pages+0x30a/0x560 mm/page_alloc.c:5525
Modules linked in:
CPU: 1 PID: 5071 Comm: syz-executor263 Not tainted 6.2.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
RIP: 0010:__alloc_pages+0x30a/0x560 mm/page_alloc.c:5525
RSP: 0018:
ffffc90003c2f1c0 EFLAGS:
00010246
RAX:
ffffc90003c2f220 RBX:
0000000000000014 RCX:
0000000000000000
RDX:
0000000000000028 RSI:
0000000000000000 RDI:
ffffc90003c2f248
RBP:
ffffc90003c2f2d8 R08:
dffffc0000000000 R09:
ffffc90003c2f220
R10:
fffff52000785e49 R11:
1ffff92000785e44 R12:
0000000000040d40
R13:
1ffff92000785e40 R14:
dffffc0000000000 R15:
1ffff92000785e3c
FS:
0000555556c0d300(0000) GS:
ffff8880b9800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f95d5e04138 CR3:
00000000793aa000 CR4:
00000000003506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
__alloc_pages_node include/linux/gfp.h:237 [inline]
alloc_pages_node include/linux/gfp.h:260 [inline]
__kmalloc_large_node+0x95/0x1e0 mm/slab_common.c:1113
__do_kmalloc_node mm/slab_common.c:956 [inline]
__kmalloc+0xfe/0x190 mm/slab_common.c:981
kmalloc include/linux/slab.h:584 [inline]
kzalloc include/linux/slab.h:720 [inline]
ext4_update_inline_data+0x236/0x6b0 fs/ext4/inline.c:346
ext4_update_inline_dir fs/ext4/inline.c:1115 [inline]
ext4_try_add_inline_entry+0x328/0x990 fs/ext4/inline.c:1307
ext4_add_entry+0x5a4/0xeb0 fs/ext4/namei.c:2385
ext4_add_nondir+0x96/0x260 fs/ext4/namei.c:2772
ext4_create+0x36c/0x560 fs/ext4/namei.c:2817
lookup_open fs/namei.c:3413 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x12ac/0x2dd0 fs/namei.c:3711
do_filp_open+0x264/0x4f0 fs/namei.c:3741
do_sys_openat2+0x124/0x4e0 fs/open.c:1310
do_sys_open fs/open.c:1326 [inline]
__do_sys_openat fs/open.c:1342 [inline]
__se_sys_openat fs/open.c:1337 [inline]
__x64_sys_openat+0x243/0x290 fs/open.c:1337
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Above issue happens as follows:
ext4_iget
ext4_find_inline_data_nolock ->i_inline_off=164 i_inline_size=60
ext4_try_add_inline_entry
__ext4_mark_inode_dirty
ext4_expand_extra_isize_ea ->i_extra_isize=32 s_want_extra_isize=44
ext4_xattr_shift_entries
->after shift i_inline_off is incorrect, actually is change to 176
ext4_try_add_inline_entry
ext4_update_inline_dir
get_max_inline_xattr_value_size
if (EXT4_I(inode)->i_inline_off)
entry = (struct ext4_xattr_entry *)((void *)raw_inode +
EXT4_I(inode)->i_inline_off);
free += EXT4_XATTR_SIZE(le32_to_cpu(entry->e_value_size));
->As entry is incorrect, then 'free' may be negative
ext4_update_inline_data
value = kzalloc(len, GFP_NOFS);
-> len is unsigned int, maybe very large, then trigger warning when
'kzalloc()'
To resolve the above issue we need to update 'i_inline_off' after
'ext4_xattr_shift_entries()'. We do not need to set
EXT4_STATE_MAY_INLINE_DATA flag here, since ext4_mark_inode_dirty()
already sets this flag if needed. Setting EXT4_STATE_MAY_INLINE_DATA
when it is needed may trigger a BUG_ON in ext4_writepages().
Reported-by: syzbot+d30838395804afc2fa6f@syzkaller.appspotmail.com
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307015253.2232062-3-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ye Bin [Tue, 7 Mar 2023 01:52:52 +0000 (09:52 +0800)]
ext4: move where set the MAY_INLINE_DATA flag is set
The only caller of ext4_find_inline_data_nolock() that needs setting of
EXT4_STATE_MAY_INLINE_DATA flag is ext4_iget_extra_inode(). In
ext4_write_inline_data_end() we just need to update inode->i_inline_off.
Since we are going to add one more caller that does not need to set
EXT4_STATE_MAY_INLINE_DATA, just move setting of EXT4_STATE_MAY_INLINE_DATA
out to ext4_iget_extra_inode().
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307015253.2232062-2-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Linus Torvalds [Sat, 11 Mar 2023 04:45:53 +0000 (20:45 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Twenty fixes all in drivers except the one zone storage revalidation
fix to sd.
The megaraid_sas fixes are more on the level of a driver update
(enabling crash dump and increasing lun number) but I thought you
could let this slide on -rc1 and the next most extensive update is a
load of fixes to mpi3mr"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Fix wrong zone_write_granularity value during revalidate
scsi: storvsc: Handle BlockSize change in Hyper-V VHD/VHDX file
scsi: megaraid_sas: Driver version update to 07.725.01.00-rc1
scsi: megaraid_sas: Add crash dump mode capability bit in MFI capabilities
scsi: megaraid_sas: Update max supported LD IDs to 240
scsi: mpi3mr: Bad drive in topology results kernel crash
scsi: mpi3mr: NVMe command size greater than 8K fails
scsi: mpi3mr: Return proper values for failures in firmware init path
scsi: mpi3mr: Wait for diagnostic save during controller init
scsi: mpi3mr: Driver unload crashes host when enhanced logging is enabled
scsi: mpi3mr: ioctl timeout when disabling/enabling interrupt
scsi: lpfc: Avoid usage of list iterator variable after loop
scsi: lpfc: Check kzalloc() in lpfc_sli4_cgn_params_read()
scsi: ufs: mcq: qcom: Clean the return path of ufs_qcom_mcq_config_resource()
scsi: ufs: mcq: qcom: Fix passing zero to PTR_ERR
scsi: ufs: ufs-qcom: Remove impossible check
scsi: ufs: core: Add soft dependency on governor_simpleondemand
scsi: hisi_sas: Check devm_add_action() return value
scsi: qla2xxx: Add option to disable FC2 Target support
scsi: target: iscsi: Fix an error message in iscsi_check_key()
Linus Torvalds [Sat, 11 Mar 2023 04:06:49 +0000 (20:06 -0800)]
Merge tag 'block-6.3-2023-03-09' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fix a regression in exclusive mode handling of the partition code,
introduced in this merge windoe (Yu)
- Fix for a use-after-free in BFQ (Yu)
- Add sysfs documentation for the 'hidden' attribute (Sagi)
* tag 'block-6.3-2023-03-09' of git://git.kernel.dk/linux:
block, bfq: fix uaf for 'stable_merge_bfqq'
docs: sysfs-block: document hidden sysfs entry
block: fix wrong mode for blkdev_put() from disk_scan_partitions()
Linus Torvalds [Sat, 11 Mar 2023 03:09:18 +0000 (19:09 -0800)]
Merge tag 'pull-highmem' of git://git./linux/kernel/git/viro/vfs
Pull put_and_unmap_page() helper from Al Viro:
"kmap_local_page() conversions in local filesystems keep running into
kunmap_local_page()+put_page() combinations. We can keep inventing
names for identical inline helpers, but it's getting rather
inconvenient. I've added a trivial helper to linux/highmem.h instead.
I would've held that back until the merge window, if not for the mess
it causes in tree topology - I've several branches merging from that
one, and it's only going to get worse if e.g. ext2 stuff gets picked
by Jan"
* tag 'pull-highmem' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
new helper: put_and_unmap_page()
Linus Torvalds [Sat, 11 Mar 2023 03:04:10 +0000 (19:04 -0800)]
Merge tag 'pull-fixes' of git://git./linux/kernel/git/viro/vfs
Pull misc fixes from Al Viro:
"pick_file() speculation fix + fix for alpha mis(merge,cherry-pick)
The fs/file.c one is a genuine missing speculation barrier in
pick_file() (reachable e.g. via close(2)). The alpha one is strictly
speaking not a bug fix, but only because confusion between
preempt_enable() and preempt_disable() is harmless on architecture
without CONFIG_PREEMPT.
Looks like alpha.git picked the wrong version of patch - that braino
used to be there in early versions, but it had been fixed quite a
while ago..."
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: prevent out-of-bounds array speculation when closing a file descriptor
alpha: fix lazy-FPU mis(merged/applied/whatnot)
Linus Torvalds [Sat, 11 Mar 2023 03:01:15 +0000 (19:01 -0800)]
Merge tag 'thermal-6.3-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Fix a recently introduced deadlock in the int340x thermal control
driver (Srinivas Pandruvada)"
* tag 'thermal-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: int340x: processor_thermal: Fix deadlock
Linus Torvalds [Fri, 10 Mar 2023 17:19:30 +0000 (09:19 -0800)]
Merge tag 'riscv-for-linus-6.3-rc2' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- RISC-V architecture-specific ELF attributes have been disabled in the
kernel builds
- A fix for a locking failure while during errata patching that
manifests on SiFive-based systems
- A fix for a KASAN failure during stack unwinding
- A fix for some lockdep failures during text patching
* tag 'riscv-for-linus-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Don't check text_mutex during stop_machine
riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode
RISC-V: fix taking the text_mutex twice during sifive errata patching
RISC-V: Stop emitting attributes
Linus Torvalds [Fri, 10 Mar 2023 16:57:46 +0000 (08:57 -0800)]
Merge tag 'drm-fixes-2023-03-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Weekly fixes.
msm and amdgpu are the vast majority of these, otherwise some
straggler misc from last week for nouveau and cirrus and a mailmap
update for a drm developer.
mailmap:
- add an entry
nouveau:
- fix system shutdown regression
- build warning fix
cirrus:
- NULL ptr deref fix
msm:
- fix invalid ptr free in syncobj cleanup
- sync GMU removal in teardown
- a5xx preemption fixes
- fix runpm imbalance
- DPU hw fixes
- stack corruption fix
- clear DSPP reservation
amdgpu:
- Misc display fixes
- UMC 8.10 fixes
- Driver unload fixes
- NBIO 7.3.0 fix
- Error checking fixes for soc15, nv, soc21 read register interface
- Fix video cap query for VCN 4.0.4
amdkfd:
- Fix return check in doorbell handling"
* tag 'drm-fixes-2023-03-10' of git://anongit.freedesktop.org/drm/drm: (42 commits)
drm/amdgpu/soc21: Add video cap query support for VCN_4_0_4
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for nv
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc21
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc15
drm/amdgpu: Fix the warning info when removing amdgpu device
drm/amdgpu: fix return value check in kfd
drm/amd: Fix initialization mistake for NBIO 7.3.0
drm/amdgpu: Fix call trace warning and hang when removing amdgpu device
mailmap: add mailmap entries for Faith.
drm/msm: DEVFREQ_GOV_SIMPLE_ONDEMAND is no longer needed
drm/amd/display: Update clock table to include highest clock setting
drm/amd/pm: Enable ecc_info table support for smu v13_0_10
drm/amdgpu: Support umc node harvest config on umc v8_10
drm/connector: print max_requested_bpc in state debugfs
drm/display: Don't block HDR_OUTPUT_METADATA on unknown EOTF
drm/msm/dpu: clear DSPP reservations in rm release
drm/msm/disp/dpu: fix sc7280_pp base offset
drm/msm/dpu: fix stack smashing in dpu_hw_ctl_setup_blendstage
drm/msm/dpu: don't use DPU_CLK_CTRL_CURSORn for DMA SSPP clocks
drm/msm/dpu: fix clocks settings for msm8998 SSPP blocks
...
Linus Torvalds [Fri, 10 Mar 2023 16:51:57 +0000 (08:51 -0800)]
Merge tag 'erofs-for-6.3-rc2-fixes' of git://git./linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"The most important one reverts an improper fix which can cause an
unexpected warning more often on specific images, and another one
fixes LZMA decompression on 32-bit platforms. The others are minor
fixes and cleanups.
- Fix LZMA decompression failure on HIGHMEM platforms
- Revert an inproper fix since it is actually an implementation issue
of vmalloc()
- Avoid a wrong DBG_BUGON since it could be triggered with -EINTR
- Minor cleanups"
* tag 'erofs-for-6.3-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: use wrapper i_blocksize() in erofs_file_read_iter()
erofs: get rid of a useless DBG_BUGON
erofs: Revert "erofs: fix kvcalloc() misuse with __GFP_NOFAIL"
erofs: fix wrong kunmap when using LZMA on HIGHMEM platforms
erofs: mark z_erofs_lzma_init/erofs_pcpubuf_init w/ __init
Linus Torvalds [Fri, 10 Mar 2023 16:45:30 +0000 (08:45 -0800)]
Merge tag 'nfsd-6.3-2' of git://git./linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Protect NFSD writes against filesystem freezing
- Fix a potential memory leak during server shutdown
* tag 'nfsd-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix a server shutdown leak
NFSD: Protect against filesystem freezing
Linus Torvalds [Fri, 10 Mar 2023 16:39:13 +0000 (08:39 -0800)]
Merge tag 'for-6.3-rc1-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"First batch of fixes. Among them there are two updates to sysfs and
ioctl which are not strictly fixes but are used for testing so there's
no reason to delay them.
- fix block group item corruption after inserting new block group
- fix extent map logging bit not cleared for split maps after
dropping range
- fix calculation of unusable block group space reporting bogus
values due to 32/64b division
- fix unnecessary increment of read error stat on write error
- improve error handling in inode update
- export per-device fsid in DEV_INFO ioctl to distinguish seeding
devices, needed for testing
- allocator size classes:
- fix potential dead lock in size class loading logic
- print sysfs stats for the allocation classes"
* tag 'for-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix block group item corruption after inserting new block group
btrfs: fix extent map logging bit not cleared for split maps after dropping range
btrfs: fix percent calculation for bg reclaim message
btrfs: fix unnecessary increment of read error stat on write error
btrfs: handle btrfs_del_item errors in __btrfs_update_delayed_inode
btrfs: ioctl: return device fsid from DEV_INFO ioctl
btrfs: fix potential dead lock in size class loading logic
btrfs: sysfs: add size class stats
Linus Torvalds [Fri, 10 Mar 2023 16:31:29 +0000 (08:31 -0800)]
Merge tag 'io_uring-6.3-2023-03-09' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Stop setting PF_NO_SETAFFINITY on io-wq workers.
This has been reported in the past as it confuses some applications,
as some of their threads will fail with -1/EINVAL if attempted
affinitized. Most recent report was on cpusets, where enabling that
with io-wq workers active will fail.
Just deal with the mask changing by checking when a worker times out,
and then exit if we have no work pending.
- Fix an issue with passthrough support where we don't properly check
if the file type has pollable uring_cmd support.
- Fix a reported W=1 warning on a variable being set and unused. Add a
special helper for iterating these lists that doesn't save the
previous list element, if that iterator never ends up using it.
* tag 'io_uring-6.3-2023-03-09' of git://git.kernel.dk/linux:
io_uring: silence variable ‘prev’ set but not used warning
io_uring/uring_cmd: ensure that device supports IOPOLL
io_uring/io-wq: stop setting PF_NO_SETAFFINITY on io-wq workers
Linus Torvalds [Fri, 10 Mar 2023 16:18:46 +0000 (08:18 -0800)]
Merge tag 'perf-tools-fixes-for-v6.3-1-2023-03-09' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Add Adrian Hunter to MAINTAINERS as a perf tools reviewer
- Sync various tools/ copies of kernel headers with the kernel sources,
this time trying to avoid first merging with upstream to then update
but instead copy from upstream so that a merge is avoided and the end
result after merging this pull request is the one expected,
tools/perf/check-headers.sh (mostly) happy, less warnings while
building tools/perf/
- Fix counting when initial delay configured by setting
perf_attr.enable_on_exec when starting workloads from the perf
command line
- Don't avoid emitting a PERF_RECORD_MMAP2 in 'perf inject
--buildid-all' when that record comes with a build-id, otherwise we
end up not being able to resolve symbols
- Don't use comma as the CSV output separator the "stat+csv_output"
test, as comma can appear on some tests as a modifier for an event,
use @ instead, ditto for the JSON linter test
- The offcpu test was looking for some bits being set on
task_struct->prev_state without masking other bits not important for
this specific 'perf test', fix it
* tag 'perf-tools-fixes-for-v6.3-1-2023-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Add Adrian Hunter to MAINTAINERS as a reviewer
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools headers x86 cpufeatures: Sync with the kernel sources
tools include UAPI: Sync linux/vhost.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers kvm: Sync uapi/{asm/linux} kvm.h headers with the kernel sources
tools include UAPI: Synchronize linux/fcntl.h with the kernel sources
tools headers: Synchronize {linux,vdso}/bits.h with the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
perf stat: Fix counting when initial delay configured
tools headers svm: Sync svm headers with the kernel sources
perf test: Avoid counting commas in json linter
perf tests stat+csv_output: Switch CSV separator to @
perf inject: Fix --buildid-all not to eat up MMAP2
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf test: Fix offcpu test prev_state check
Dave Airlie [Fri, 10 Mar 2023 04:17:34 +0000 (14:17 +1000)]
Merge tag 'amd-drm-fixes-6.3-2023-03-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.3-2023-03-09:
amdgpu:
- Misc display fixes
- UMC 8.10 fixes
- Driver unload fixes
- NBIO 7.3.0 fix
- Error checking fixes for soc15, nv, soc21 read register interface
- Fix video cap query for VCN 4.0.4
amdkfd:
- Fix return check in doorbell handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230310031314.1296929-1-alexander.deucher@amd.com
Theodore Ts'o [Mon, 6 Mar 2023 18:54:50 +0000 (13:54 -0500)]
fs: prevent out-of-bounds array speculation when closing a file descriptor
Google-Bug-Id:
114199369
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Veerabadhran Gopalakrishnan [Wed, 8 Mar 2023 14:03:53 +0000 (19:33 +0530)]
drm/amdgpu/soc21: Add video cap query support for VCN_4_0_4
Added the video capability query support for VCN version 4_0_4
Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Alex Deucher [Tue, 7 Mar 2023 13:59:13 +0000 (08:59 -0500)]
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for nv
Properly skip non-existent registers as well.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Mon, 6 Mar 2023 15:35:34 +0000 (10:35 -0500)]
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc21
Properly skip non-existent registers as well.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Mon, 6 Mar 2023 15:34:20 +0000 (10:34 -0500)]
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc15
Properly skip non-existent registers as well.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
lyndonli [Fri, 3 Mar 2023 06:55:05 +0000 (14:55 +0800)]
drm/amdgpu: Fix the warning info when removing amdgpu device
Actually, the drm_dev_enter in psp_cmd_submit_buf does not
protect anything. If DRM device is unplugged, it will always
check the condition in WARN_ON. So drop drm_dev_enter and
drm_dev_exit in psp_cmd_submit_buf.
When removing amdgpu, the calling order is as follows:
amdgpu_pci_remove
drm_dev_unplug
amdgpu_driver_unload_kms
amdgpu_device_fini_hw
amdgpu_device_ip_fini_early
psp_hw_fini
psp_ras_terminate
psp_ta_unloadye
psp_cmd_submit_buf
[ 4507.740388] Call Trace:
[ 4507.740389] <TASK>
[ 4507.740391] psp_ta_unload+0x44/0x70 [amdgpu]
[ 4507.740485] psp_ras_terminate+0x4d/0x70 [amdgpu]
[ 4507.740575] psp_hw_fini+0x28/0xa0 [amdgpu]
[ 4507.740662] amdgpu_device_fini_hw+0x328/0x442 [amdgpu]
[ 4507.740791] amdgpu_driver_unload_kms+0x51/0x60 [amdgpu]
[ 4507.740875] amdgpu_pci_remove+0x5a/0x140 [amdgpu]
[ 4507.740962] ? _raw_spin_unlock_irqrestore+0x27/0x43
[ 4507.740965] ? __pm_runtime_resume+0x60/0x90
[ 4507.740968] pci_device_remove+0x39/0xb0
[ 4507.740971] device_remove+0x46/0x70
[ 4507.740972] device_release_driver_internal+0xd1/0x160
[ 4507.740974] driver_detach+0x4a/0x90
[ 4507.740975] bus_remove_driver+0x6c/0xf0
[ 4507.740976] driver_unregister+0x31/0x50
[ 4507.740977] pci_unregister_driver+0x40/0x90
[ 4507.740978] amdgpu_exit+0x15/0x120 [amdgpu]
v2: fix commit message style issue
Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shashank Sharma [Mon, 27 Feb 2023 14:42:28 +0000 (15:42 +0100)]
drm/amdgpu: fix return value check in kfd
This patch fixes a return value check in kfd doorbell handling.
This function should return 0(error) only when the ida_simple_get
returns < 0(error), return > 0 is a success case.
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes:
16f0013157bf ("drm/amdkfd: Allocate doorbells only when needed")
Acked-by: Christian Koenig <chriatian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Wed, 1 Mar 2023 15:36:06 +0000 (09:36 -0600)]
drm/amd: Fix initialization mistake for NBIO 7.3.0
The same strapping initialization issue that happened on NBIO 7.5.1
appears to be happening on NBIO 7.3.0.
Apply the same fix to 7.3.0 as well.
Note: This workaround relies upon the integrated GPU being enabled
in BIOS. If the integrated GPU is disabled in BIOS a different
workaround will be required.
Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Cc: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/linux-usb/Y%2Fz9GdHjPyF2rNG3@glanzmann.de/T/#u
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
lyndonli [Thu, 2 Mar 2023 06:18:12 +0000 (14:18 +0800)]
drm/amdgpu: Fix call trace warning and hang when removing amdgpu device
On GPUs with RAS enabled, below call trace and hang are observed when
shutting down device.
v2: use DRM device unplugged flag instead of shutdown flag as the check to
prevent memory wipe in shutdown stage.
[ +0.000000] RIP: 0010:amdgpu_vram_mgr_fini+0x18d/0x1c0 [amdgpu]
[ +0.000001] PKRU:
55555554
[ +0.000001] Call Trace:
[ +0.000001] <TASK>
[ +0.000002] amdgpu_ttm_fini+0x140/0x1c0 [amdgpu]
[ +0.000183] amdgpu_bo_fini+0x27/0xa0 [amdgpu]
[ +0.000184] gmc_v11_0_sw_fini+0x2b/0x40 [amdgpu]
[ +0.000163] amdgpu_device_fini_sw+0xb6/0x510 [amdgpu]
[ +0.000152] amdgpu_driver_release_kms+0x16/0x30 [amdgpu]
[ +0.000090] drm_dev_release+0x28/0x50 [drm]
[ +0.000016] devm_drm_dev_init_release+0x38/0x60 [drm]
[ +0.000011] devm_action_release+0x15/0x20
[ +0.000003] release_nodes+0x40/0xc0
[ +0.000001] devres_release_all+0x9e/0xe0
[ +0.000001] device_unbind_cleanup+0x12/0x80
[ +0.000003] device_release_driver_internal+0xff/0x160
[ +0.000001] driver_detach+0x4a/0x90
[ +0.000001] bus_remove_driver+0x6c/0xf0
[ +0.000001] driver_unregister+0x31/0x50
[ +0.000001] pci_unregister_driver+0x40/0x90
[ +0.000003] amdgpu_exit+0x15/0x120 [amdgpu]
Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Conor Dooley [Fri, 3 Mar 2023 14:37:55 +0000 (14:37 +0000)]
RISC-V: Don't check text_mutex during stop_machine
We're currently using stop_machine() to update ftrace & kprobes, which
means that the thread that takes text_mutex during may not be the same
as the thread that eventually patches the code. This isn't actually a
race because the lock is still held (preventing any other concurrent
accesses) and there is only one thread running during stop_machine(),
but it does trigger a lockdep failure.
This patch just elides the lockdep check during stop_machine.
Fixes:
c15ac4fd60d5 ("riscv/ftrace: Add dynamic function tracer support")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230303143754.4005217-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Alexandre Ghiti [Wed, 8 Mar 2023 09:16:39 +0000 (10:16 +0100)]
riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode
When CONFIG_FRAME_POINTER is unset, the stack unwinding function
walk_stackframe randomly reads the stack and then, when KASAN is enabled,
it can lead to the following backtrace:
[ 0.000000] ==================================================================
[ 0.000000] BUG: KASAN: stack-out-of-bounds in walk_stackframe+0xa6/0x11a
[ 0.000000] Read of size 8 at addr
ffffffff81807c40 by task swapper/0
[ 0.000000]
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.2.0-12919-g24203e6db61f #43
[ 0.000000] Hardware name: riscv-virtio,qemu (DT)
[ 0.000000] Call Trace:
[ 0.000000] [<
ffffffff80007ba8>] walk_stackframe+0x0/0x11a
[ 0.000000] [<
ffffffff80099ecc>] init_param_lock+0x26/0x2a
[ 0.000000] [<
ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[ 0.000000] [<
ffffffff80c49c80>] dump_stack_lvl+0x22/0x36
[ 0.000000] [<
ffffffff80c3783e>] print_report+0x198/0x4a8
[ 0.000000] [<
ffffffff80099ecc>] init_param_lock+0x26/0x2a
[ 0.000000] [<
ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[ 0.000000] [<
ffffffff8015f68a>] kasan_report+0x9a/0xc8
[ 0.000000] [<
ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[ 0.000000] [<
ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[ 0.000000] [<
ffffffff8006e99c>] desc_make_final+0x80/0x84
[ 0.000000] [<
ffffffff8009a04e>] stack_trace_save+0x88/0xa6
[ 0.000000] [<
ffffffff80099fc2>] filter_irq_stacks+0x72/0x76
[ 0.000000] [<
ffffffff8006b95e>] devkmsg_read+0x32a/0x32e
[ 0.000000] [<
ffffffff8015ec16>] kasan_save_stack+0x28/0x52
[ 0.000000] [<
ffffffff8006e998>] desc_make_final+0x7c/0x84
[ 0.000000] [<
ffffffff8009a04a>] stack_trace_save+0x84/0xa6
[ 0.000000] [<
ffffffff8015ec52>] kasan_set_track+0x12/0x20
[ 0.000000] [<
ffffffff8015f22e>] __kasan_slab_alloc+0x58/0x5e
[ 0.000000] [<
ffffffff8015e7ea>] __kmem_cache_create+0x21e/0x39a
[ 0.000000] [<
ffffffff80e133ac>] create_boot_cache+0x70/0x9c
[ 0.000000] [<
ffffffff80e17ab2>] kmem_cache_init+0x6c/0x11e
[ 0.000000] [<
ffffffff80e00fd6>] mm_init+0xd8/0xfe
[ 0.000000] [<
ffffffff80e011d8>] start_kernel+0x190/0x3ca
[ 0.000000]
[ 0.000000] The buggy address belongs to stack of task swapper/0
[ 0.000000] and is located at offset 0 in frame:
[ 0.000000] stack_trace_save+0x0/0xa6
[ 0.000000]
[ 0.000000] This frame has 1 object:
[ 0.000000] [32, 56) 'c'
[ 0.000000]
[ 0.000000] The buggy address belongs to the physical page:
[ 0.000000] page:(____ptrval____) refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x81a07
[ 0.000000] flags: 0x1000(reserved|zone=0)
[ 0.000000] raw:
0000000000001000 ff600003f1e3d150 ff600003f1e3d150 0000000000000000
[ 0.000000] raw:
0000000000000000 0000000000000000 00000001ffffffff
[ 0.000000] page dumped because: kasan: bad access detected
[ 0.000000]
[ 0.000000] Memory state around the buggy address:
[ 0.000000]
ffffffff81807b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000]
ffffffff81807b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000] >
ffffffff81807c00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 f3
[ 0.000000] ^
[ 0.000000]
ffffffff81807c80: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000]
ffffffff81807d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000] ==================================================================
Fix that by using READ_ONCE_NOCHECK when reading the stack in imprecise
mode.
Fixes:
5d8544e2d007 ("RISC-V: Generic library routines and assembly")
Reported-by: Chathura Rajapaksha <chathura.abeyrathne.lk@gmail.com>
Link: https://lore.kernel.org/all/CAD7mqryDQCYyJ1gAmtMm8SASMWAQ4i103ptTb0f6Oda=tPY2=A@mail.gmail.com/
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230308091639.602024-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Seth Forshee [Thu, 9 Mar 2023 20:39:09 +0000 (14:39 -0600)]
filelocks: use mount idmapping for setlease permission check
A user should be allowed to take out a lease via an idmapped mount if
the fsuid matches the mapped uid of the inode. generic_setlease() is
checking the unmapped inode uid, causing these operations to be denied.
Fix this by comparing against the mapped inode uid instead of the
unmapped uid.
Fixes:
9caccd41541a ("fs: introduce MOUNT_ATTR_IDMAP")
Cc: stable@vger.kernel.org
Signed-off-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Geert Uytterhoeven [Thu, 9 Mar 2023 07:45:46 +0000 (08:45 +0100)]
i2c: dev: Fix bus callback return values
The i2cdev_{at,de}tach_adapter() callbacks are used for two purposes:
1. As notifier callbacks, when (un)registering I2C adapters created or
destroyed after i2c_dev_init(),
2. As bus iterator callbacks, for registering already existing
adapters from i2c_dev_init(), and for cleanup.
Unfortunately both use cases expect different return values: the former
expects NOTIFY_* return codes, while the latter expects zero or error
codes, and aborts in case of error.
Hence in case 2, as soon as i2cdev_{at,de}tach_adapter() returns
(non-zero) NOTIFY_OK, the bus iterator aborts. This causes (a) only the
first already existing adapter to be registered, leading to missing
/dev/i2c-* entries, and (b) a failure to unregister all but the first
I2C adapter during cleanup.
Fix this by introducing separate callbacks for the bus iterator,
wrapping the notifier functions, and always returning succes.
Any errors inside these callback functions are unlikely to happen, and
are fatal anyway.
Fixes:
cddf70d0bce71c2a ("i2c: dev: fix notifier return values")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Uwe Kleine-König [Sun, 26 Feb 2023 22:26:54 +0000 (23:26 +0100)]
i2c: Convert drivers to new .probe() callback
Now that .probe() was changed not to get the id parameter, drivers can
be converted back to that with the eventual goal to drop .probe_new().
Implement that for the i2c drivers that are part of the i2c core.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Uwe Kleine-König [Sun, 26 Feb 2023 22:26:53 +0000 (23:26 +0100)]
i2c: mux: Convert all drivers to new .probe() callback
Now that .probe() was changed not to get the id parameter, drivers can
be converted back to that with the eventual goal to drop .probe_new().
Implement that for the i2c mux drivers.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Uwe Kleine-König [Sun, 26 Feb 2023 22:26:52 +0000 (23:26 +0100)]
i2c: Switch .probe() to not take an id parameter
Commit
b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back
type") introduced a new probe callback to convert i2c init routines to
not take an i2c_device_id parameter. Now that all in-tree drivers are
converted to the temporary .probe_new() callback, .probe() can be
modified to match the desired prototype.
Now that .probe() and .probe_new() have the same semantic, they can be
defined as members of an anonymous union to save some memory and
simplify the core code a bit.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Uwe Kleine-König [Sun, 26 Feb 2023 22:26:51 +0000 (23:26 +0100)]
media: i2c: ov2685: convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so
it can be trivially converted.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/lkml/20221121102838.16448-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Uwe Kleine-König [Sun, 26 Feb 2023 22:26:50 +0000 (23:26 +0100)]
media: i2c: ov5695: convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so
it can be trivially converted.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/lkml/20221121102705.16092-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Uwe Kleine-König [Sun, 26 Feb 2023 22:26:49 +0000 (23:26 +0100)]
w1: ds2482: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Link: https://lore.kernel.org/lkml/20221118224540.619276-596-uwe@kleine-koenig.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Uwe Kleine-König [Sun, 26 Feb 2023 22:26:48 +0000 (23:26 +0100)]
serial: sc16is7xx: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/lkml/20221118224540.619276-572-uwe@kleine-koenig.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Uwe Kleine-König [Sun, 26 Feb 2023 22:26:47 +0000 (23:26 +0100)]
mtd: maps: pismo: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Acked-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/lkml/20221118224540.619276-497-uwe@kleine-koenig.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Uwe Kleine-König [Sun, 26 Feb 2023 22:26:46 +0000 (23:26 +0100)]
misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/lkml/20221118224540.619276-483-uwe@kleine-koenig.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Dave Airlie [Thu, 9 Mar 2023 19:52:09 +0000 (05:52 +1000)]
Merge tag 'drm-msm-fixes-2023-03-09' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
msm-fixes for v6.3-rc2
- Fix for possible invalid ptr free in submit ioctl syncobj cleanup path.
- Synchronize GMU removal in driver teardown path
- a5xx preemption fixes
- Fix runpm imbalance at unbind
- DPU hw catalog fixes:
- set DPU_MDP_PERIPH_0_REMOVED for sc8280xp as this is another chipset
where the PERIPH_0 block of registers is not there
- fix the DPU features supported in QCM2290 by comparing it with the
downstream device tree
- fix the length of registers in the sc7180_ctl from 0xe4 to 0x1dc
- fix the max mixer line width for sm6115 and qcm2290 chipsets in the
DPU catalog
- fix the scaler version on sm8550, sc8280xp, sm8450, sm8250, sm8350
and sm6115. This was incorrectly populated on the SW version of the
scaler library and not the scaler HW version
- Drop dim layer support for msm8998 as its not indicated to be
supported in the downstream DTSI
- fix the DPU_CLK_CTRL bits for msm 8998 sspp blocks
- Use DPU_CLK_CTRL_DMA* prefix instead of DPU_CLK_CTRL_CURSOR*
for all chipsets for the DMA sspp blocks
- fix the ping-pong block base address for sc7280 in the DPU HW catalog
- Fix stack corruption issue in the dpu_hw_ctl_setup_blendstage() function
as it was causing a negative left shift by protecting against an invalid
index
- Clear the DSPP reservations in dpu_rm_release(). This was missed out and
as as result the DSPP was not released from the resource manager global
state.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvH+VH_Wx3mFMG51CMnoiU06CM-+-WMhM73M42Qx7Bp4A@mail.gmail.com
Dave Airlie [Thu, 9 Mar 2023 19:24:43 +0000 (05:24 +1000)]
mailmap: add mailmap entries for Faith.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Thu, 9 Mar 2023 18:56:58 +0000 (10:56 -0800)]
Merge tag 'net-6.3-rc2' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.
Current release - regressions:
- core: avoid skb end_offset change in __skb_unclone_keeptruesize()
- sched:
- act_connmark: handle errno on tcf_idr_check_alloc
- flower: fix fl_change() error recovery path
- ieee802154: prevent user from crashing the host
Current release - new code bugs:
- eth: bnxt_en: fix the double free during device removal
- tools: ynl:
- fix enum-as-flags in the generic CLI
- fully inherit attrs in subsets
- re-license uniformly under GPL-2.0 or BSD-3-clause
Previous releases - regressions:
- core: use indirect calls helpers for sk_exit_memory_pressure()
- tls:
- fix return value for async crypto
- avoid hanging tasks on the tx_lock
- eth: ice: copy last block omitted in ice_get_module_eeprom()
Previous releases - always broken:
- core: avoid double iput when sock_alloc_file fails
- af_unix: fix struct pid leaks in OOB support
- tls:
- fix possible race condition
- fix device-offloaded sendpage straddling records
- bpf:
- sockmap: fix an infinite loop error
- test_run: fix &xdp_frame misplacement for LIVE_FRAMES
- fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR
- netfilter: tproxy: fix deadlock due to missing BH disable
- phylib: get rid of unnecessary locking
- eth: bgmac: fix *initial* chip reset to support BCM5358
- eth: nfp: fix csum for ipsec offload
- eth: mtk_eth_soc: fix RX data corruption issue
Misc:
- usb: qmi_wwan: add telit 0x1080 composition"
* tag 'net-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
tools: ynl: fix enum-as-flags in the generic CLI
tools: ynl: move the enum classes to shared code
net: avoid double iput when sock_alloc_file fails
af_unix: fix struct pid leaks in OOB support
eth: fealnx: bring back this old driver
net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC
net: microchip: sparx5: fix deletion of existing DSCP mappings
octeontx2-af: Unlock contexts in the queue context cache in case of fault detection
net/smc: fix fallback failed while sendmsg with fastopen
ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause
mailmap: update entries for Stephen Hemminger
mailmap: add entry for Maxim Mikityanskiy
nfc: change order inside nfc_se_io error path
ethernet: ice: avoid gcc-9 integer overflow warning
ice: don't ignore return codes in VSI related code
ice: Fix DSCP PFC TLV creation
net: usb: qmi_wwan: add Telit 0x1080 composition
net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990
netfilter: conntrack: adopt safer max chain length
net: tls: fix device-offloaded sendpage straddling records
...
Linus Torvalds [Thu, 9 Mar 2023 18:17:23 +0000 (10:17 -0800)]
Merge tag 'for-linus-
2023030901' of git://git./linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix potential out of bound write of zeroes in HID core with a
specially crafted uhid device (Lee Jones)
- fix potential use-after-free in work function in intel-ish-hid (Reka
Norman)
- selftests config fixes (Benjamin Tissoires)
- few device small fixes and support
* tag 'for-linus-
2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: intel-ish-hid: ipc: Fix potential use-after-free in work function
HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse
HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded
selftest: hid: fix hid_bpf not set in config
HID: uhid: Over-ride the default maximum data buffer value with our own
HID: core: Provide new max_buffer_size attribute to over-ride the default
Linus Torvalds [Thu, 9 Mar 2023 18:08:46 +0000 (10:08 -0800)]
Merge tag 'm68k-for-v6.3-tag2' of git://git./linux/kernel/git/geert/linux-m68k
Pull m68k fixes from Geert Uytterhoeven:
- Fix systems with memory at end of 32-bit address space
- Fix initrd on systems where memory does not start at address zero
- Fix 68030 handling of bus errors for addresses in exception tables
* tag 'm68k-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Only force 030 bus error if PC not in exception table
m68k: mm: Move initrd phys_to_virt handling after paging_init()
m68k: mm: Fix systems with memory at end of 32-bit address space
Al Viro [Mon, 6 Mar 2023 01:20:30 +0000 (01:20 +0000)]
sh: sanitize the flags on sigreturn
We fetch %SR value from sigframe; it might have been modified by signal
handler, so we can't trust it with any bits that are not modifiable in
user mode.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jens Axboe [Thu, 9 Mar 2023 16:51:13 +0000 (09:51 -0700)]
io_uring: silence variable ‘prev’ set but not used warning
If io_uring.o is built with W=1, it triggers a warning:
io_uring/io_uring.c: In function ‘__io_submit_flush_completions’:
io_uring/io_uring.c:1502:40: warning: variable ‘prev’ set but not used [-Wunused-but-set-variable]
1502 | struct io_wq_work_node *node, *prev;
| ^~~~
which is due to the wq_list_for_each() iterator always keeping a 'prev'
variable. Most users need this to remove an entry from a list, for
example, but __io_submit_flush_completions() never does that.
Add a basic helper that doesn't track prev instead, and use that in
that function.
Reported-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Wed, 8 Mar 2023 16:26:13 +0000 (09:26 -0700)]
io_uring/uring_cmd: ensure that device supports IOPOLL
It's possible for a file type to support uring commands, but not
pollable ones. Hence before issuing one of those, we should check
that it is supported and error out upfront if it isn't.
Cc: stable@vger.kernel.org
Fixes:
5756a3a7e713 ("io_uring: add iopoll infrastructure for io_uring_cmd")
Link: https://github.com/axboe/liburing/issues/816
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yue Hu [Mon, 6 Mar 2023 07:55:27 +0000 (15:55 +0800)]
erofs: use wrapper i_blocksize() in erofs_file_read_iter()
linux/fs.h has a wrapper for this operation.
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230306075527.1338-1-zbestahu@gmail.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Gao Xiang [Thu, 9 Mar 2023 05:31:48 +0000 (13:31 +0800)]
erofs: get rid of a useless DBG_BUGON
`err` could be -EINTR and it should not be the case. Actually such
DBG_BUGON is useless.
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230309053148.9223-2-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Gao Xiang [Thu, 9 Mar 2023 05:31:47 +0000 (13:31 +0800)]
erofs: Revert "erofs: fix kvcalloc() misuse with __GFP_NOFAIL"
Let's revert commit
12724ba38992 ("erofs: fix kvcalloc() misuse with
__GFP_NOFAIL") since kvmalloc() already supports __GFP_NOFAIL in commit
a421ef303008 ("mm: allow !GFP_KERNEL allocations for kvmalloc"). So
the original fix was wrong.
Actually there was some issue as [1] discussed, so before that mm fix
is landed, the warn could still happen but applying this commit first
will cause less.
[1] https://lore.kernel.org/r/
20230305053035.1911-1-hsiangkao@linux.alibaba.com
Fixes:
12724ba38992 ("erofs: fix kvcalloc() misuse with __GFP_NOFAIL")
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230309053148.9223-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Gao Xiang [Sun, 5 Mar 2023 13:44:55 +0000 (21:44 +0800)]
erofs: fix wrong kunmap when using LZMA on HIGHMEM platforms
As the call trace shown, the root cause is kunmap incorrect pages:
BUG: kernel NULL pointer dereference, address:
00000000
CPU: 1 PID: 40 Comm: kworker/u5:0 Not tainted 6.2.0-rc5 #4
Workqueue: erofs_worker z_erofs_decompressqueue_work
EIP: z_erofs_lzma_decompress+0x34b/0x8ac
z_erofs_decompress+0x12/0x14
z_erofs_decompress_queue+0x7e7/0xb1c
z_erofs_decompressqueue_work+0x32/0x60
process_one_work+0x24b/0x4d8
? process_one_work+0x1a4/0x4d8
worker_thread+0x14c/0x3fc
kthread+0xe6/0x10c
? rescuer_thread+0x358/0x358
? kthread_complete_and_exit+0x18/0x18
ret_from_fork+0x1c/0x28
---[ end trace
0000000000000000 ]---
The bug is trivial and should be fixed now. It has no impact on
!HIGHMEM platforms.
Fixes:
622ceaddb764 ("erofs: lzma compression support")
Cc: <stable@vger.kernel.org> # 5.16+
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230305134455.88236-1-hsiangkao@linux.alibaba.com
Yangtao Li [Fri, 3 Mar 2023 06:37:31 +0000 (14:37 +0800)]
erofs: mark z_erofs_lzma_init/erofs_pcpubuf_init w/ __init
They are used during the erofs module init phase. Let's mark it as
__init like any other function.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230303063731.66760-1-frank.li@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Paolo Abeni [Thu, 9 Mar 2023 10:45:08 +0000 (11:45 +0100)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-07 (ice)
This series contains updates to ice driver only.
Dave removes masking from pfcena field as it was incorrectly preventing
valid traffic classes from being enabled.
Michal resolves various smatch issues such as not propagating error
codes and returning 0 explicitly.
Arnd Bergmann resolves gcc-9 warning for integer overflow.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ethernet: ice: avoid gcc-9 integer overflow warning
ice: don't ignore return codes in VSI related code
ice: Fix DSCP PFC TLV creation
====================
Link: https://lore.kernel.org/r/20230307220714.3997294-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jiapeng Chong [Wed, 8 Mar 2023 07:13:16 +0000 (15:13 +0800)]
fs/locks: Remove redundant assignment to cmd
Variable 'cmd' set but not used.
fs/locks.c:2428:3: warning: Value stored to 'cmd' is never read.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4439
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Jiapeng Chong [Tue, 7 Mar 2023 08:49:18 +0000 (16:49 +0800)]
splice: Remove redundant assignment to ret
The variable ret belongs to redundant assignment and can be deleted.
fs/splice.c:940:2: warning: Value stored to 'ret' is never read.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4406
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Greg Kroah-Hartman [Wed, 8 Mar 2023 13:19:34 +0000 (14:19 +0100)]
staging: r8188eu: delete driver
Now that the same hardware that the r8188eu driver supported is
supported by the real wireless driver rtl8xxxu, the r8188eu driver can
be deleted.
Also the rtl8xxxu driver supports way more devices, and is a fraction of
the overall size, making this a much better overall solution.
Thanks to the r8188eu developers and maintainers and reviewers over the
years, your work allowed Linux users to use their hardware before the
real driver was implemented properly.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Pavel Skripkin <paskripkin@gmail.com>
Acked-by: Larry Finger <LarryFinger@lwfinger.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Acked-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20230308131934.380395-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jakub Kicinski [Thu, 9 Mar 2023 07:28:23 +0000 (23:28 -0800)]
Merge branch 'tools-ynl-fix-enum-as-flags-in-the-generic-cli'
Jakub Kicinski says:
====================
tools: ynl: fix enum-as-flags in the generic CLI
The CLI needs to use proper classes when looking at Enum definitions
rather than interpreting the YAML spec ad-hoc, because we have more
than on format of the definition supported.
====================
Link: https://lore.kernel.org/r/20230308003923.445268-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 8 Mar 2023 00:39:23 +0000 (16:39 -0800)]
tools: ynl: fix enum-as-flags in the generic CLI
Lorenzo points out that the generic CLI is broken for the netdev
family. When I added the support for documentation of enums
(and sparse enums) the client script was not updated.
It expects the values in enum to be a list of names,
now it can also be a dict (YAML object).
Reported-by: Lorenzo Bianconi <lorenzo@kernel.org>
Fixes:
e4b48ed460d3 ("tools: ynl: add a completely generic client")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 8 Mar 2023 00:39:22 +0000 (16:39 -0800)]
tools: ynl: move the enum classes to shared code
Move bulk of the EnumSet and EnumEntry code to shared
code for reuse by cli.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thadeu Lima de Souza Cascardo [Tue, 7 Mar 2023 17:37:07 +0000 (14:37 -0300)]
net: avoid double iput when sock_alloc_file fails
When sock_alloc_file fails to allocate a file, it will call sock_release.
__sys_socket_file should then not call sock_release again, otherwise there
will be a double free.
[ 89.319884] ------------[ cut here ]------------
[ 89.320286] kernel BUG at fs/inode.c:1764!
[ 89.320656] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 89.321051] CPU: 7 PID: 125 Comm: iou-sqp-124 Not tainted 6.2.0+ #361
[ 89.321535] RIP: 0010:iput+0x1ff/0x240
[ 89.321808] Code: d1 83 e1 03 48 83 f9 02 75 09 48 81 fa 00 10 00 00 77 05 83 e2 01 75 1f 4c 89 ef e8 fb d2 ba 00 e9 80 fe ff ff c3 cc cc cc cc <0f> 0b 0f 0b e9 d0 fe ff ff 0f 0b eb 8d 49 8d b4 24 08 01 00 00 48
[ 89.322760] RSP: 0018:
ffffbdd60068bd50 EFLAGS:
00010202
[ 89.323036] RAX:
0000000000000000 RBX:
ffff9d7ad3cacac0 RCX:
0000000000001107
[ 89.323412] RDX:
000000000003af00 RSI:
0000000000000000 RDI:
ffff9d7ad3cacb40
[ 89.323785] RBP:
ffffbdd60068bd68 R08:
ffffffffffffffff R09:
ffffffffab606438
[ 89.324157] R10:
ffffffffacb3dfa0 R11:
6465686361657256 R12:
ffff9d7ad3cacb40
[ 89.324529] R13:
0000000080000001 R14:
0000000080000001 R15:
0000000000000002
[ 89.324904] FS:
00007f7b28516740(0000) GS:
ffff9d7aeb1c0000(0000) knlGS:
0000000000000000
[ 89.325328] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 89.325629] CR2:
00007f0af52e96c0 CR3:
0000000002a02006 CR4:
0000000000770ee0
[ 89.326004] PKRU:
55555554
[ 89.326161] Call Trace:
[ 89.326298] <TASK>
[ 89.326419] __sock_release+0xb5/0xc0
[ 89.326632] __sys_socket_file+0xb2/0xd0
[ 89.326844] io_socket+0x88/0x100
[ 89.327039] ? io_issue_sqe+0x6a/0x430
[ 89.327258] io_issue_sqe+0x67/0x430
[ 89.327450] io_submit_sqes+0x1fe/0x670
[ 89.327661] io_sq_thread+0x2e6/0x530
[ 89.327859] ? __pfx_autoremove_wake_function+0x10/0x10
[ 89.328145] ? __pfx_io_sq_thread+0x10/0x10
[ 89.328367] ret_from_fork+0x29/0x50
[ 89.328576] RIP: 0033:0x0
[ 89.328732] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[ 89.329073] RSP: 002b:
0000000000000000 EFLAGS:
00000202 ORIG_RAX:
00000000000001a9
[ 89.329477] RAX:
0000000000000000 RBX:
0000000000000000 RCX:
00007f7b28637a3d
[ 89.329845] RDX:
00007fff4e4318a8 RSI:
00007fff4e4318b0 RDI:
0000000000000400
[ 89.330216] RBP:
00007fff4e431830 R08:
00007fff4e431711 R09:
00007fff4e4318b0
[ 89.330584] R10:
0000000000000000 R11:
0000000000000202 R12:
00007fff4e441b38
[ 89.330950] R13:
0000563835e3e725 R14:
0000563835e40d10 R15:
00007f7b28784040
[ 89.331318] </TASK>
[ 89.331441] Modules linked in:
[ 89.331617] ---[ end trace
0000000000000000 ]---
Fixes:
da214a475f8b ("net: add __sys_socket_file()")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230307173707.468744-1-cascardo@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / platform / kernel / linux-starfive.git / log