drm/mediatek: dp: change mtk_dp_driver to static

mtk_dp_driver is only used in mtk_dp.c now, change it
to static.

Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913134929.1970187-1-yangyingliang@huawei.com

drm/mediatek: dp: Fix compiler warning in mtk_dp_video_mute()

Fix debug message formatting by using %s instead of 0x%x.

Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Reported-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916133821.27980-4-rex-bc.chen@mediatek.com

drm/mediatek: dp: Remove unused register definitions

Some definitions in mtk_dp_reg.h are not used, so remove these
redundant codes.

Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916133821.27980-3-rex-bc.chen@mediatek.com

drm/mediatek: dp: Reduce indentation in mtk_dp_bdg_detect()

In order to improve human readability, reduce the indentation by
returning early if the dp/edp cable is not plugged in.

Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916133821.27980-2-rex-bc.chen@mediatek.com

drm/gma500: Call acpi_video_register_backlight()

On machines without an Intel video opregion the acpi_video driver
immediately probes the ACPI video bus and used to also immediately
register acpi_video# backlight devices when supported.

Once the drm/kms driver then loaded later and possibly registered
a native backlight device then the drivers/acpi/video_detect.c code
unregistered the acpi_video0 device to avoid there being 2 backlight
devices (when acpi_video_get_backlight_type()==native).

This means that userspace used to briefly see 2 devices and the
disappearing of acpi_video0 after a brief time confuses the systemd
backlight level save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920

To fix this the ACPI video code has been modified to make backlight class
device registration a separate step, relying on the drm/kms driver to
ask for the acpi_video backlight registration after it is done setting up
its native backlight device.

Add a call to the new acpi_video_register_backlight() function after
setting up the gma500's native backlight, so that the acpi_video backlight
device gets registered on systems where the gma500's native backlight
device is not registered.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220917205920.647212-6-hdegoede@redhat.com

drm/gma500: Don't register backlight when another backlight should be used

Before this commit when we want userspace to use the acpi_video backlight
device we register both the GPU's native backlight device and acpi_video's
firmware acpi_video# backlight device. This relies on userspace preferring
firmware type backlight devices over native ones.

Registering 2 backlight devices for a single display really is
undesirable, don't register the GPU's native backlight device when
another backlight device should be used.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220917205920.647212-5-hdegoede@redhat.com

drm/gma500: Use backlight_get_brightness() to get the brightness

Use backlight_get_brightness() instead of directly referencing
bd->props.brightness. This will take backlight_is_blank() into account,
properly setting brightness to 0 when screen-blanking has been requested
through the backlight sysfs interface.

Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220917205920.647212-4-hdegoede@redhat.com

drm/gma500: Change registered backlight device type to raw/native

Change the type for the registered backlight class device from platform
to raw/native.

The poulsbo/cedarview/oaktrail backlight support is using native GPU
backlight control and as such the type should be raw (aka native) as
is done by all the other native GPU backlight driver code.

Note this will not change much from userspace's point of view.
poulsbo/cedarview laptops typically offer both an ACPI-video
backlight interface as well as the native GPU backlight interface.

The /sys/class/backlight/acpi_video0 has a type of firmware and
userspace typically looks for firmware devices before looking
for platform devices. The typical standard lookup order is:
firmware -> platform -> raw

This means that both before and after this change typical userspace
backlight consumers (sich as e.g. GNOME) will prefer the firmware
acpi_video0 backlight device.

This has been tested on a Packard Bell Dot SC (Intel Atom N2600, cedarview)
and a Sony Vaio vpc-x11s1e (Intel N540, poulsbo) laptop.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220917205920.647212-3-hdegoede@redhat.com

drm/gma500: Refactor backlight support (v2)

Refactor backlight support so that the gma_backlight_enable() /
gma_backlight_disable() / gma_backlight_set() functions used by
the Opregion handle will also work if no backlight_device gets
registered.

This is a preparation patch for not registering the gma500's own backlight
device when acpi_video should be used, since registering 2 backlight
devices for a single display really is undesirable.

Since the acpi-video interface often uses the OpRegion we need to keep
the OpRegion functional even when dev_priv->backlight_device is NULL.

As a result of this refactor the actual backlight_device_register()
call is moved to the shared backlight.c code and all #ifdefs related to
CONFIG_BACKLIGHT_CLASS_DEVICE are now also limited to backlight.c .

No functional changes intended.

This has been tested on a Packard Bell Dot SC (Intel Atom N2600, cedarview)
and a Sony Vaio vpc-x11s1e (Intel N540, poulsbo) laptop.

Changes in v2:
- Fix unused variable warnings when CONFIG_BACKLIGHT is not selected by
  marking the 2 variables as  __maybe_unused.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220917205920.647212-2-hdegoede@redhat.com

drm: panel-orientation-quirks: Add quirk for Aya Neo Air

Yet another x86 gaming handheld.

This one has many SKUs with quite a few of DMI strings,
so let's just use a catchall, just as with Aya Neo Next.

Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220825191946.1678798-1-maccraft123mc@gmail.com

drm/gma500: Remove unnecessary suspend/resume wrappers

The psb_runtime_suspend/resume/thaw/freeze/restore functions are all
just 1:1 wrappers around gma_power_suspend/_resume.

Drop these wrappers and use the DEFINE_RUNTIME_DEV_PM_OPS() macro to
define the dev_pm_ops struct.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909115646.99920-7-hdegoede@redhat.com

drm/gma500: Rewrite power management code

Rewrite the power.c code. For some reason this was doing locking +
refcounting + state (suspended or not) bookkeeping all by itself.

But there is no reason for this, this is all taken care of by
the runtime-pm core, through pm_runtime_get()/_put().

Besides this not being necessary the DIY code is also quite weird/
buggy in some places. E.g. power_begin() would manually do a resume
when not resumed already and force_on=true, followed by a
pm_runtime_get(), which will cause a call to gma_power_resume() to
get scheduled which would redo the entire resume again. Which can
all be replaced by a single pm_runtime_get_sync() call.

Note that this is just a cleanup, this does not actually fix
the (disabled through #if 0) runtime-pm support. It does now call
pm_runtime_enable(), but only after doing a pm_runtime_get() at
probe-time, so the device is never runtime suspended.

Doing this permanent get() + enable() instead of not calling
enable() at all is necessary for the pm_runtime_get_if_in_use() call
in gma_power_begin() to work properly.

Note this also removes the gma_power_is_on() call a check like this
without actually holding a reference is always racy, so it is a bad
idea (and therefor has no pm_runtime_foo() equivalent).

The 2 code paths which were using gma_power_is_on() are actually both
guaranteed to only run when the device is powered-on so the 2 checks
can simply be dropped.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909115646.99920-6-hdegoede@redhat.com

drm/gma500: Remove a couple of not useful function wrappers

The gma_crtc_set_config() and psb_unlocked_ioctl() functions are 1:1
wrappers for drm_helpers. Drop these wrappers.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909115646.99920-5-hdegoede@redhat.com

drm/gma500: Remove never set dev_priv->rpm_enabled flag

The rpm_enabled flag is never set, remove it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909115646.99920-4-hdegoede@redhat.com

drm/gma500: Remove runtime_allowed dead code in psb_unlocked_ioctl()

runtime_allowed is initialized to 0, so the runtime_allowed == 1 condition
is never true making this dead code. Remove it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909115646.99920-3-hdegoede@redhat.com

drm/gma500: Fix (vblank) IRQs not working after suspend/resume

Fix gnome-shell (and other page-flip users) hanging after suspend/resume
because of the gma500's IRQs not working.

This fixes 2 problems with the IRQ handling:

1. gma_power_off() calls gma_irq_uninstall() which does a free_irq(), but
   gma_power_on() called gma_irq_preinstall() + gma_irq_postinstall() which
   do not call request_irq. Replace the pre- + post-install calls with
   gma_irq_install() which does prep + request + post.

2. After fixing 1. IRQs still do not work on a Packard Bell Dot SC (Intel
   Atom N2600, cedarview) netbook.

   Cederview uses MSI interrupts and it seems that the BIOS re-configures
   things back to normal APIC based interrupts during S3 suspend. There is
   some MSI PCI-config registers save/restore code which tries to deal with
   this, but on the Packard Bell Dot SC this is not sufficient to restore
   MSI IRQ functionality after a suspend/resume.

   Replace the PCI-config registers save/restore with pci_disable_msi() on
   suspend + pci_enable_msi() on resume. Fixing e.g. gnome-shell hanging.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906203852.527663-4-hdegoede@redhat.com
(cherry picked from commit 235fdbc32d559db21e580f85035c59372704f09e)

drm/vboxvideo: fix repeated words in comments

Delete the redundant word 'the'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220824130226.33980-1-yuanjilin@cdjrlc.com

drm: panel-orientation-quirks: Add quirk for Anbernic Win600

This device is another x86 gaming handheld, and as (hopefully) there is
only one set of DMI IDs it's using DMI_EXACT_MATCH

Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220803182402.1217293-1-maccraft123mc@gmail.com

drm/plane-helper: Add a drm_plane_helper_atomic_check() helper

Provides a default plane state check handler for primary planes that are a
fullscreen scanout buffer and whose state scale and position can't change.

There are some drivers that duplicate this logic in their helpers, such as
simpledrm and ssd130x. Factor out this common code into a plane helper and
make drivers use it.

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913162307.121503-1-javierm@redhat.com

drm/sched: Use parent fence instead of finished

Using the parent fence instead of the finished fence
to get the job status. This change is to avoid GPU
scheduler timeout error which can cause GPU reset.

Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220914164321.2156-6-Arvind.Yadav@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

dma-buf: dma_fence_wait must enable signaling

dma_fence_wait() should always enable signaling even
when the fence is already signaled.

Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220914164321.2156-5-Arvind.Yadav@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

dma-buf: Enable signaling on fence for selftests

Here's enabling software signaling on fence for selftest.

Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220914164321.2156-4-Arvind.Yadav@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

dma-buf: set signaling bit for the stub fence

Here's setting software signaling bit for the stub fence
which is always signaled. If this fence signaling bit is
not set then the AMD GPU scheduler will cause a GPU reset
due to a GPU scheduler cleanup activity timeout.

Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220914164321.2156-3-Arvind.Yadav@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

dma-buf: Remove the signaled bit status check

Remove the signaled bit status check because it is returning
early when the fence is already signaled and
__dma_fence_enable_signaling is checking the status of signaled
bit again.

Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220914164321.2156-2-Arvind.Yadav@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/rockchip: remove vop_writel from vop1 driver

cppcheck reports
[drivers/gpu/drm/rockchip/rockchip_drm_vop.c:186]: (style) The function 'vop_writel' is never used.

vop_writel is static function that is not used, so remove it.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220521190716.1936193-1-trix@redhat.com

drm/rockchip: support gamma control on RK3399

The RK3399 has a 1024-entry gamma LUT with 10 bits per component on its
"big" VOP and a 256-entry, 8 bit per component LUT on the "little" VOP.
Compared to the RK3288, it no longer requires disabling gamma while
updating the LUT. On the RK3399, the LUT can be updated at any time as
the hardware has two LUT buffers, one can be written while the other is
in use. A swap of the buffers is triggered by writing 1 to the
update_gamma_lut register.

Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com>
Tested-by: "Milan P. Stanić" <mps@arvanta.net>
Tested-by: Linus Heckemann <git@sphalerite.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019215843.42718-3-sigmaris@gmail.com

drm/rockchip: define gamma registers for RK3399

The VOP on RK3399 has a different approach from previous versions for
setting a gamma lookup table, using an update_gamma_lut register. As
this differs from RK3288, give RK3399 its own set of "common" register
definitions.

Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com>
Tested-by: "Milan P. Stanić" <mps@arvanta.net>
Tested-by: Linus Heckemann <git@sphalerite.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019215843.42718-2-sigmaris@gmail.com

drm/tests: Change "igt_" prefix to "drm_test_"

With the introduction of KUnit, IGT is no longer the only option to run
the DRM unit tests, as the tests can be run through kunit-tool or on
real hardware with CONFIG_KUNIT.

Therefore, remove the "igt_" prefix from the tests and replace it with
the "drm_test_" prefix, making the tests' names independent from the tool
used.

Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Acked-by: David Gow <davidgow@google.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220911191756.203118-2-mairacanal@riseup.net

drm/tests: Split drm_framebuffer_create_test into parameterized tests

The igt_check_drm_framebuffer_create is based on a loop that executes
tests for all createbuffer_tests test cases. This could be better
represented by parameterized tests, provided by KUnit.

So, convert the igt_check_drm_framebuffer_create into parameterized tests.

Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220911191756.203118-1-mairacanal@riseup.net

Merge tag 'backlight-detect-refactor-1' of git://git./linux/kernel/git/pdx86/platform-drivers-x86 into drm-misc-next

Immutable backlight-detect-refactor branch between acpi, drm-* and pdx86

Tag (immutable branch) with v6.0-rc1 + the (acpi/x86) backlight
detect refactor work. For merging into the acpi, drm-* and pdx86
subsystems.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmMVsogUHGhkZWdvZWRl
# QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yy6wgAlig+7hkq940L62lTpj0g2gNQv8zc
# HCsMpnU7dnJcZYaEvIjouZhf33ZbN52c0fQq2JWjt7fFX04LLyIiyrJ26Lc293JR
# ++yXpJcVoewRGqApy/P3Z05TKUCLll5bexvK4t8isnhOtEXD/nDPWKTLIV2Kd1DK
# nLY4KgRznXZ85RhYheUEdidZ7Lwlzt1JVBMq7tpnzu3nVdDExyZmqlqCUITcLynu
# ysuASQGr0D2i+1vb9eifHIA3xsQO0S37Bv62aBMBKxB6B8Fz1DYr8VA2YvoT82Hv
# IFT0hzCCZ/63Ljga05O78TwraxAQX0RvZWqjqGgnZg6fIBh2hxUiqeQY6g==
# =SA1R
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 05 Sep 2022 09:25:44 AM IST
# gpg:                using RSA key BAF03B5D2718411A5E9E177E92EC4779440327DC
# gpg:                issuer "hdegoede@redhat.com"
# gpg: Can't check signature: No public key
From: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/261afe3d-7790-e945-adf6-a2c96c9b1eff@redhat.com

Merge drm/drm-next into drm-misc-next

We need 6.0-rc1 to merge the backlight rework PR.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/amd/pm: remove unused declarations in hardwaremanager.h

phm_is_hw_access_blocked() and phm_block_hw_access() has been
removed since commit 698f88e697cc ("drm/amd/powerplay: delete
dead code in powerplay"), so remove them.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913024847.552254-6-cuigaosheng1@huawei.com

drm/gma500: remove unused declarations in psb_intel_drv.h

psb_intel_sdvo_supports_hotplug(), psb_intel_sdvo_set_hotplug()
and psb_intel_sdvo_find() have been removed since
commit 871c60156dbe ("drm/gma500: Remove dead code"),
so remove them.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913024847.552254-5-cuigaosheng1@huawei.com

drm/radeon: remove unused declarations for radeon

radeon_combios_get_ext_tmds_info() has been removed since
commit fcec570b27a4 ("drm/radeon/kms: add support for
external tmds on legacy boards").

radeon_mst has been removed since
commit 01ad1d9c2888 ("drm/radeon: Drop legacy MST support").

r600_hdmi_acr() has been removed since
commit 64424d6e45ae ("radeon/audio: consolidate update_acr()
functions (v2)").

So remove the declarations for them from header file.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913024847.552254-4-cuigaosheng1@huawei.com

drm/radeon/r600_cs: remove r600_cs_legacy_get_tiling_conf() declaration

r600_cs_legacy_get_tiling_conf() has been removed since
commit 8333f607a631 ("drm/radeon: remove UMS support"),
so remove it.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913024847.552254-3-cuigaosheng1@huawei.com

drm/vmwgfx: remove unused vmw_bo_is_vmw_bo() declaration

vmw_bo_is_vmw_bo() has been removed since
commit 298799a28264 ("drm/vmwgfx: Fix gem refcounting and
memory evictions"), so remove it.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913024847.552254-2-cuigaosheng1@huawei.com

drm/scdc: Document hotplug gotchas

There's some interactions between the SCDC setup and the disconnection /
reconnection of displays. Let's document it and a solution.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-9-maxime@cerno.tech

drm/vc4: hdmi: Reset link on hotplug

During a hotplug cycle (such as a TV going out of suspend, or when the
cable is disconnected and reconnected), the expectation is that the same
state used before the disconnection is reused until the next commit.

However, the HDMI scrambling requires that some flags are set in the
monitor, and those flags are very likely to be reset when the cable has
been disconnected. This will thus result in a blank display, even if the
display pipeline configuration hasn't been modified or is in the exact
same state.

The solution we've had so far is to enable the scrambling-related bits
again on reconnection, but the HDMI 2.0 specification (Section 6.1.3.1 -
Scrambling Control) requires that the scrambling enable bit is set
before sending any scrambled video signal. Using that solution thus
breaks that expectation.

The solution used by i915 is to do a full modeset on the connector so
that we disable the video signal, enable the scrambling bit, and enable
the video signal again.

As such, we took that code and plugged it into vc4. It probably could
have been turned into an helper, but it proved to be difficult for
several reasons:

  * i915 has fairly different structures than simpler KMS drivers such
    as vc4, so doing some code that works with both proved to be
    difficult;

  * Other simpler drivers could reuse some of it (tegra, dw-hdmi), but
    it would still require to move some parameters currently stored in
    private structure that are needed to compute whether the scrambling
    is needed or not, and then inform the driver that it needs to be
    enabled. Some of those parameters are already in core structures
    (drm_display_mode, drm_display_info, bpc), but the output format
    isnt't. Adding it is fairly challenging since unlike the TMDS char
    rate or mode, there's no consensus on what format to pick in
    drivers, so it's not possible to write some generic code that can
    depend on it.

For these reasons, we chose to duplicate the code for now, until someone
else really needs it as well, in which case we will be able to convert
it into a generic helper.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-8-maxime@cerno.tech

drm/vc4: hdmi: Move vc4_hdmi_supports_scrambling() around

We'll need it earlier in the driver, so let's move it next to the other
scrambling-related helpers.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-7-maxime@cerno.tech

drm/vc4: hdmi: Switch to detect_ctx

We'll need the locking context in future patch, so let's convert .detect
to .detect_ctx.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-6-maxime@cerno.tech

drm/vc4: hdmi: Simplify the hotplug handling

Our detect callback has a bunch of operations to perform depending on
the current and last status of the connector, such a setting the CEC
physical address or enabling the scrambling again.

This is currently dealt with a bunch of if / else statetements that make
it fairly difficult to read and extend.

Let's move all that logic to a function of its own.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-5-maxime@cerno.tech

drm/vc4: hdmi: Remove mutex in detect

We recently introduced a new mutex to protect concurrent execution of
ALSA and KMS hooks, and the concurrent access to some of vc4_hdmi
fields.

However, using it in the detect hook was creating a reentrency issue
with CEC code. Indeed, calling cec_s_phys_addr_from_edid from detect
might call the CEC adap_enable hook with the lock held, eventually
resulting in a deadlock.

Since we didn't really need to protect anything at the moment in the CEC
code, the decision was made to ignore the mutex in those CEC hooks,
working around the issue.

However, we can have the same thing happening if we end up triggering a
mode set from the detect callback, for example using
drm_atomic_helper_connector_hdmi_reset_link().

Since we don't really need to protect anything in detect either, let's
just drop the lock in detect, and add it again in CEC.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-4-maxime@cerno.tech

drm/vc4: hdmi: Remove unused argument in vc4_hdmi_supports_scrambling

Even though vc4_hdmi_supports_scrambling takes a mode as an argument, it
never uses it. Let's remove it.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-3-maxime@cerno.tech

drm/vc4: hdmi: Constify drm_display_mode

We don't modify the drm_display_mode pointer we have in the driver in
most places, so let's make them const.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-2-maxime@cerno.tech

drm/tests: Set also mock plane src_x, src_y, src_w and src_h

We need to set also src_x, src_y, src_w and src_h for the mock plane.
After fix for drm_atomic_helper_damage_iter_init we are using these
when iterating damage_clips.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220823112920.352563-5-jouni.hogander@intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Tested-by: Maíra Canal <mairacanal@riseup.net>

drm: Use original src rect while initializing damage iterator

drm_plane_state->src might be modified by the driver. This is done
e.g. in i915 driver when there is bigger framebuffer than the plane
and there is some offset within framebuffer. I915 driver calculates
separate offset and adjusts src rect coords to be relative to this
offset. Damage clips are still relative to original src coords
provided by user-space.

This patch ensures original coordinates provided by user-space are
used when initiliazing damage iterator.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220823112920.352563-2-jouni.hogander@intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

Revert "drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP"

As reported by Laurent in response to this commit[1], this functionality
should not be implemented using the devicetree, because of this let's
revert this series for now.

This reverts commit c312b0df3b13e4c533743bb2c37fd1bc237368e5.

[1] https://lore.kernel.org/all/20220902153906.31000-2-macroalpha82@gmail.com/

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912113856.817188-3-robert.foss@linaro.org

Revert "dt-bindings: Add byteswap order to chrontel ch7033"

As reported by Laurent in response to this commit[1], this functionality
should not be implemented using the devicetree, because of this let's
revert this series for now.

This reverts commit a4be71430c76eca43679e8485085c230afa84460.

[1] https://lore.kernel.org/all/20220902153906.31000-2-macroalpha82@gmail.com/

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912113856.817188-2-robert.foss@linaro.org

drm/bridge: it6505: use drm_debug_enabled() in it6505_debug_print()

As made mention of in commit 9f0ac028410f ("drm/print: rename drm_debug
to __drm_debug to discourage use"), we shouldn't explicitly refer to
__drm_debug in this context. So, use drm_debug_enabled() instead.

Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220910224816.15058-1-someguy@effective-light.com

Merge tag 'drm-intel-gt-next-2022-09-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

UAPI Changes:

- Revert "drm/i915/dg2: Add preemption changes for Wa_14015141709"

  The intent of Wa_14015141709 was to inform us that userspace can no
  longer control object-level preemption as it has on past platforms
  (i.e., by twiddling register bit CS_CHICKEN1[0]).  The description of
  the workaround in the spec wasn't terribly well-written, and when we
  requested clarification from the hardware teams we were told that on the
  kernel side we should also probably stop setting
  FF_SLICE_CS_CHICKEN1[14], which is the register bit that directs the
  hardware to honor the settings in per-context register CS_CHICKEN1.  It
  turns out that this guidance about FF_SLICE_CS_CHICKEN1[14] was a
  mistake; even though CS_CHICKEN1[0] is non-operational and useless to
  userspace, there are other bits in the register that do still work and
  might need to be adjusted by userspace in the future (e.g., to implement
  other workarounds that show up).  If we don't set
  FF_SLICE_CS_CHICKEN1[14] in i915, then those future workarounds would
  not take effect.

  Even more details at:

  https://lists.freedesktop.org/archives/intel-gfx/2022-September/305478.html

Driver Changes:

- Align GuC/HuC firmware versioning scheme to kernel practices (John)
- Fix #6639: h264 hardware video decoding broken in 5.19 on Intel(R)
  Celeron(R) N3060 (Nirmoy)
- Meteorlake (MTL) enabling (Matt R)
- GuC SLPC improvements (Vinay, Rodrigo)
- Add thread execution tuning setting for ATS-M (Matt R)
- Don't start PXP without mei_pxp bind (Juston)
- Remove leftover verbose debug logging from GuC error capture (John)
- Abort suspend on low system memory conditions (Nirmoy, Matt A, Chris)
- Add DG2 Wa_16014892111 (Matt R)

- Rename ggtt_view as gtt_view (Niranjana)
- Consider HAS_FLAT_CCS() in needs_ccs_pages (Matt A)
- Don't try to disable host RPS when this was never enabled. (Rodrigo)
- Clear stalled GuC CT request after a reset (Daniele)
- Remove runtime info printing from GuC time stamp logging (Jani)
- Skip Bit12 fw domain reset for gen12+ (Sushma, Radhakrishna)

- Make GuC log sizes runtime configurable (John)
- Selftest improvements (Daniele, Matt B, Andrzej)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YxshfqUN+vDe92Zn@jlahtine-mobl.ger.corp.intel.com

Merge tag 'amd-drm-next-6.1-2022-09-08' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.1-2022-09-08:

amdgpu:
- Mode2 reset for RDNA2
- Lots of new DC documentation
- Add documentation about different asic families
- DSC improvements
- Aldebaran fixes
- Misc spelling and grammar fixes
- GFXOFF stats support for vangogh
- DC frame size fixes
- NBIO 7.7 updates
- DCN 3.2 updates
- DCN 3.1.4 Updates
- SMU 13.x updates
- Misc bug fixes
- Rework DC register offset handling
- GC 11.x updates
- PSP 13.x updates
- SDMA 6.x updates
- GMC 11.x updates
- SR-IOV updates
- PSP fixes for TA unloading
- DSC passthrough support
- Misc code cleanups

amdkfd:
- ISA fixes for some GC 10.3 IPs
- Misc code cleanups

radeon:
- Delayed work flush fix
- Use time_after for some jiffies calculations

drm:
- DSC passthrough aux support

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908155202.57862-1-alexander.deucher@amd.com

drm/aperture: Fix some kerneldoc comments

Reword some kerneldoc comments for the DRM aperture handling code.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905162241.391226-1-thierry.reding@gmail.com

drm/format-helper: Add drm_fb_build_fourcc_list() helper

Add drm_fb_build_fourcc_list() function that builds a list of supported
formats from native and emulated ones. Helpful for all drivers that do
format conversion as part of their plane updates. Update current caller.

v3:
* improve warnings on ignored formats (Sam)
v2:
* use u32 instead of uint32_t (Sam)
* print a warning if output array is too small (Sam)
* comment fixes (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905141648.22013-5-tzimmermann@suse.de

drm/modes: Add initializer macro DRM_MODE_INIT()

The macro DRM_MODE_INIT() initializes an instance of
struct drm_display_mode with typical parameters. Convert simpledrm
and also update the macro DRM_SIMPLE_MODE().

v3:
* fix DRM_MODE_INIT() docs (kernel test robot)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905141648.22013-4-tzimmermann@suse.de

drm/probe-helper: Add drm_crtc_helper_mode_valid_fixed()

Add drm_crtc_helper_mode_valid_fixed(), which validates a given mode
against a display hardware's mode. Convert simpledrm and use it in a
few other drivers with static modes.

v4:
* remove empty line after opening brace
v2:
* rename 'static' and 'hw' to 'fixed' everywhere

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905141648.22013-3-tzimmermann@suse.de

drm/probe-helper: Add drm_connector_helper_get_modes_fixed()

Add drm_connector_helper_get_modes_fixed(), which duplicates a single
display mode for a connector. Convert drivers.

v2:
* rename 'static' and 'hw' to 'fixed' everywhere
* fix typo 'there' to 'their' (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905141648.22013-2-tzimmermann@suse.de

drm/vkms: fix 32bit compilation error by replacing macros

Replace vkms_formats macro for fixed-point operations with functions
from drm/drm_fixed.h to do the same job and fix 32-bit compilation
errors.

v2:
- don't cast results to s32 (Igor)
- add missing drm_fixp2int conversion (Igor)

Fixes: a19c2ac9858 ("drm: vkms: Add support to the RGB565 format")
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> (v1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220910190303.682897-1-mwen@igalia.com

Merge tag 'drm-misc-next-2022-09-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.1-rc1:

[airlied - fix sun4i_tv build]

UAPI Changes:
- Hide unregistered connectors from GETCONNECTOR ioctl.
- drm/virtio no longer advertises LINEAR modifier, as it doesn't work.
-

Cross-subsystem Changes:
- Fix GPF in udmabuf failure path.

Core Changes:
- Rework TTM placement to use intersect/compatible functions.
- Drop legacy DP-MST support.
- More DP-MST related fixes, and move all state into atomic.
- Make DRM_MIPI_DBI select DRM_KMS_HELPER.
- Add audio_infoframe packing for DP.
- Add logging when some atomic check functions fail.
- Assorted documentation updates and fixes.

Driver Changes:
- Assorted cleanups and fixes in msm, lcdif, nouveau, virtio,
  panel/ilitek, bridge/icn6211, tve200, gma500, bridge/*, panfrost, via,
  bochs, qxl, sun4i.
- Add add AUO B133UAN02.1, IVO M133NW4J-R3, Innolux N120ACA-EA1 eDP panels.
- Improve DP-MST modeset state handling in amdgpu, nouveau, i915.
- Drop DP-MST from radeon driver, it was broken and only user of legacy
  DP-MST.
- Handle unplugging better in vc4.
- Simplify drm cmdparser tests.
- Add DP support to ti-sn65dsi86.
- Add MT8195 DP support to mediatek.
- Support RGB565, XRGB64, and ARGB64 formats in vkms.
- Convert sun4i tv support to atomic.
- Refactor vc4/vec TV Modesetting, and fix timings.
- Use atomic helpers instead of simple display helpers in ssd130x.

Maintainer changes:
- Add Douglas Anderson as reviewer for panel-edp.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a489485b-3ebc-c734-0f80-aed963d89efe@linux.intel.com

drm/vkms: fix variable dereferenced before check warning

Smatch warns:

drivers/gpu/drm/vkms/vkms_plane.c:110 vkms_plane_atomic_update() warn:
 variable dereferenced before check 'fb' (see line 108)

Fix the warning by moving the dereference after the NULL check.

Fixes: 8ba1648567e2 ("drm: vkms: Refactor the plane composer to accept new formats")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908105623.72777-1-harshit.m.mogalapalli@oracle.com

drm/udl: Sync pending URBs at the end of suspend

It's better to perform the sync at the very last of the suspend
instead of the pipe-disable function, so that we can catch all pending
URBs (if any).

While we're at it, drop the error code from udl_sync_pending_urb()
since we basically ignore it; instead, give a clear error message
indicating a problem.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-13-tiwai@suse.de

drm/udl: Don't re-initialize stuff at retrying the URB list allocation

udl_alloc_urb_list() retires the allocation if there is no enough room
left, and it reinitializes the stuff unnecessarily such as the linked
list head and the waitqueue, which could be harmful.  Those should be
outside the retry loop.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-12-tiwai@suse.de

drm/udl: Fix inconsistent urbs.count value during udl_free_urb_list()

In the current design, udl_get_urb() may be called asynchronously
during the driver freeing its URL list via udl_free_urb_list().
The problem is that the sync is determined by comparing the urbs.count
and urbs.available fields, while we clear urbs.count field only once
after udl_free_urb_list() finishes, i.e. during udl_free_urb_list(),
the state becomes inconsistent.

For fixing this inconsistency and also for hardening the locking
scheme, this patch does a slight refactoring of the code around
udl_get_urb() and udl_free_urb_list().  Now urbs.count is updated in
the same spinlock at extracting a URB from the list in
udl_free_url_list().

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-11-tiwai@suse.de

drm/udl: Fix potential URB leaks

A couple of error handlings forgot to process the URB completion.
Those are both with WARN_ON() so should be visible, but we must fix
them in anyway.

Fixes: 7350b2a3fbc6 ("drm/udl: Replace BUG_ON() with WARN_ON()")
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-10-tiwai@suse.de

drm/udl: Pass rectangle directly to udl_handle_damage()

Just for some code simplification.

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/87tu5iauw4.wl-tiwai@suse.de

drm/udl: Drop unneeded alignment

The alignment of damaged area was needed for the original udlfb driver
that tried to trim the superfluous copies between front and backend
buffers and handle data in long int.  It's not the case for udl DRM
driver, hence we can omit the whole unneeded alignment, as well as the
dead code.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-8-tiwai@suse.de

drm/udl: Increase the default URB list size to 20

It seems that the current size (4) for the URB list is too small on
some devices, and it resulted in the occasional stalls.  Increase the
default URB list size to 20 for working around it.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-7-tiwai@suse.de

drm/udl: Suppress error print for -EPROTO at URB completion

The driver may receive -EPROTO at the URB completion when the device
gets disconnected, and it's a normal situation.  Suppress the error
print for that, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-6-tiwai@suse.de

Revert "drm/udl: Kill pending URBs at suspend and disconnect"

This reverts the recent fix commit
  e25d5954264d ("drm/udl: Kill pending URBs at suspend and disconnect")
as it turned out to lead to potential hangup at a disconnection, and
it doesn't help much for suspend/resume problem, either.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-5-tiwai@suse.de

drm/udl: Enable damage clipping

Call drm_plane_enable_fb_damage_clips() and give userspace a chance
of minimizing the updated display area.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-4-tiwai@suse.de

drm/udl: Add reset_resume

Implement the reset_resume callback of struct usb_driver. Set the
standard channel when called.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-3-tiwai@suse.de

drm/udl: Restore display mode on resume

Restore the display mode whne resuming from suspend. Currently, the
display remains dark.

On resume, the CRTC's mode does not change, but the 'active' flag
changes to 'true'. Taking this into account when considering a mode
switch restores the display mode.

The bug is reproducable by using Gnome with udl and observing the
adapter's suspend/resume behavior.

Actually, the whole check added in udl_simple_display_pipe_enable()
about the crtc_state->mode_changed was bogus.  We should drop the
whole check and always apply the mode change in this function.

[ tiwai -- Drop the mode_changed check entirely instead, per Daniel's
  suggestion ]

Fixes: 997d33c35618 ("drm/udl: Inline DPMS code into CRTC enable and disable functions")
Cc: <stable@vger.kernel.org>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-2-tiwai@suse.de

drm/format: Split into more granular test cases

While we have multiple test cases, most of them check multiple
conditions, calling the function that is tested multiple times with
different arguments (with comments that indicate test case boundary).
This usually means that it can be easily converted into multiple test
cases.

Passing output:
============================================================
================= drm_format (18 subtests) =================
[PASSED] drm_format_block_width_invalid
[PASSED] drm_format_block_width_one_plane
[PASSED] drm_format_block_width_two_plane
[PASSED] drm_format_block_width_three_plane
[PASSED] drm_format_block_width_tiled
[PASSED] drm_format_block_height_invalid
[PASSED] drm_format_block_height_one_plane
[PASSED] drm_format_block_height_two_plane
[PASSED] drm_format_block_height_three_plane
[PASSED] drm_format_block_height_tiled
[PASSED] drm_format_min_pitch_invalid
[PASSED] drm_format_min_pitch_one_plane_8bpp
[PASSED] drm_format_min_pitch_one_plane_16bpp
[PASSED] drm_format_min_pitch_one_plane_24bpp
[PASSED] drm_format_min_pitch_one_plane_32bpp
[PASSED] drm_format_min_pitch_two_plane
[PASSED] drm_format_min_pitch_three_plane_8bpp
[PASSED] drm_format_min_pitch_tiled
=================== [PASSED] drm_format ====================
============================================================
Testing complete. Ran 18 tests: passed: 18

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20220831215608.349269-2-michal.winiarski@intel.com

drm/format: Use appropriate types in expect/assert

drm_format_info_* functions don't return bool, and the info variable is a
pointer.
Expecting non-NULL info will cause the test to crash if it is NULL in
checks that follow (which dereference it).
Use appropriate KUNIT_EXPECT/KUNIT_ASSERT variants.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20220831215608.349269-1-michal.winiarski@intel.com

drm/rockchip: dsi: add rk3568 support

Add the compatible and GRF definitions for the RK3568 soc.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906174823.28561-4-macroalpha82@gmail.com

dt-bindings: display: rockchip-dsi: add rk3568 compatible

The rk3568 uses the same dw-mipi-dsi controller as previous Rockchip
SOCs, so add a compatible string for it.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906174823.28561-2-macroalpha82@gmail.com

drm/rockchip: vop: fix repeated words in comment

Delete the redundant word 'in'.

Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908123616.19195-1-wangjianli@cdjrlc.com

drm/tidss: fix repeated words in comments

 Delete the redundant word 'to'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220824130450.41703-1-yuanjilin@cdjrlc.com

drm/omap: dmm_tiler:Remove the print function dev_err()

From the coccinelle check:

./drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
Error:line 817 is redundant because platform_get_irq() already prints an
error

So,remove the unnecessary print function dev_err()

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220810062738.13554-1-ye.xingchen@zte.com.cn

drm/omap: dss: Fix refcount leak bugs

In dss_init_ports() and __dss_uninit_ports(), we should call
of_node_put() for the reference returned by of_graph_get_port_by_id()
in fail path or when it is not used anymore.

Fixes: 09bffa6e5192 ("drm: omap: use common OF graph helpers")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220722144348.1306569-1-windhl@126.com

drm: omapdrm: dss: replace ternary operator with max()

Fix the following coccicheck warning:

drivers/gpu/drm/omapdrm/dss/dispc.c:2454:21-22: WARNING opportunity for max()

Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220517050208.121488-1-guozhengkui@vivo.com

drm/sun4i: tv: Include drm_atomic.h

Commit ec491291dc94 ("drm/sun4i: tv: Merge mode_set into atomic_enable")
has introduced a call to drm_atomic_get_new_crtc_state(), but didn't
include drm_atomic.h.

On CONFIG_OF systems, this is fine because drm_atomic.h is included by
drm_of.h through drm_bridge.h. However, whenever CONFIG_OF isn't set, we
end up with a compilation error.

Fixes: ec491291dc94 ("drm/sun4i: tv: Merge mode_set into atomic_enable")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909093116.4141982-1-maxime@cerno.tech

drm/dp_mst: Avoid deleting payloads for connectors staying enabled

When an MST connector stays enabled during a commit the connector's MST
state needs to be added to the atomic state, but the corresponding MST
payload allocation shouldn't be set for deletion; fix such modesets by
ensuring the above even if the connector was already enabled before the
modeset.

The issue led to the following:
[  761.992923] i915 0000:00:02.0: drm_WARN_ON(payload->delete)
[  761.992949] WARNING: CPU: 6 PID: 1401 at drivers/gpu/drm/display/drm_dp_mst_topology.c:4221 drm_dp_atomic_find_time_slots+0x236/0x280 [drm_display_helper]
[  761.992955] Modules linked in: snd_hda_intel i915 drm_buddy drm_display_helper drm_kms_helper ttm drm snd_hda_codec_hdmi snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm prime_numbers i2c_algo_bit syscopyarea sysfillrect sysimgblt fb_sys_fops x86_pkg_temp_thermal cdc_ether coretemp crct10dif_pclmul usbnet crc32_pclmul mii ghash_clmulni_intel e1000e mei_me ptp i2c_i801 pps_core mei i2c_smbus intel_lpss_pci fuse [last unloaded: drm]
[  761.992986] CPU: 6 PID: 1401 Comm: testdisplay Tainted: G     U             6.0.0-rc4-imre+ #565
[  761.992989] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR5 RVP, BIOS ADLPFWI1.R00.3135.A00.2203251419 03/25/2022
[  761.992990] RIP: 0010:drm_dp_atomic_find_time_slots+0x236/0x280 [drm_display_helper]
[  761.992994] Code: 4c 8b 67 50 4d 85 e4 75 03 4c 8b 27 e8 03 28 4e e1 48 c7 c1 8b 26 2c a0 4c 89 e2 48 c7 c7 a8 26 2c a0 48 89 c6 e8 31 d5 88 e1 <0f> 0b 49 8b 85 d0 00 00 00 4c 89 fa 48 c7 c6 a0 41 2c a0 48 8b 78
[  761.992995] RSP: 0018:ffffc9000177ba60 EFLAGS: 00010286
[  761.992998] RAX: 0000000000000000 RBX: ffff88810d2f1540 RCX: 0000000000000000
[  761.992999] RDX: 0000000000000001 RSI: ffffffff82368a25 RDI: 00000000ffffffff
[  761.993000] RBP: ffff888142299d80 R08: ffff8884adbfdfe8 R09: 00000000ffefffff
[  761.993001] R10: ffff8884a6bfe000 R11: ffff8884ac443c30 R12: ffff888102972f90
[  761.993002] R13: ffff8881163e2cf0 R14: 00000000000003ac R15: ffff88810c501000
[  761.993003] FS:  00007f81e4c459c0(0000) GS:ffff888496500000(0000) knlGS:0000000000000000
[  761.993004] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  761.993005] CR2: 0000555dac962a98 CR3: 0000000123a34006 CR4: 0000000000770ee0
[  761.993006] PKRU: 55555554
[  761.993007] Call Trace:
[  761.993009]  <TASK>
[  761.993012]  intel_dp_mst_compute_config+0x19a/0x350 [i915]
[  761.993090]  intel_atomic_check+0xf37/0x3180 [i915]
[  761.993168]  drm_atomic_check_only+0x5d3/0xa60 [drm]
[  761.993182]  drm_atomic_commit+0x56/0xc0 [drm]
[  761.993192]  ? drm_plane_get_damage_clips.cold+0x1c/0x1c [drm]
[  761.993204]  drm_atomic_helper_set_config+0x78/0xc0 [drm_kms_helper]
[  761.993214]  drm_mode_setcrtc+0x1ed/0x750 [drm]
[  761.993232]  ? drm_mode_getcrtc+0x180/0x180 [drm]
[  761.993241]  drm_ioctl_kernel+0xb5/0x150 [drm]
[  761.993252]  drm_ioctl+0x203/0x3d0 [drm]
[  761.993261]  ? drm_mode_getcrtc+0x180/0x180 [drm]
[  761.993276]  __x64_sys_ioctl+0x8a/0xb0
[  761.993281]  do_syscall_64+0x38/0x90
[  761.993285]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[  761.993287] RIP: 0033:0x7f81e551aaff
[  761.993288] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00
[  761.993290] RSP: 002b:00007fff4304af10 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[  761.993292] RAX: ffffffffffffffda RBX: 00007fff4304afa0 RCX: 00007f81e551aaff
[  761.993293] RDX: 00007fff4304afa0 RSI: 00000000c06864a2 RDI: 0000000000000004
[  761.993294] RBP: 00000000c06864a2 R08: 0000000000000000 R09: 0000555dac8a9c68
[  761.993294] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000008c4
[  761.993295] R13: 0000000000000004 R14: 0000555dac8a9c68 R15: 00007fff4304b098
[  761.993301]  </TASK>

Fixes: 083351e96386 ("drm/display/dp_mst: Fix modeset tracking in drm_dp_atomic_release_vcpi_slots()")
Testcase: igt@testdisplay
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907142542.1681994-1-imre.deak@intel.com

drm/panel-edp: Add Innolux N120ACA-EA1 panel entry

This panel has the same delay timing as N116BCA-EA1 from the same
company, which is also the same as delay_200_500_e80_d50.

Add an entry for it.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908085454.1024167-2-wenst@chromium.org

drm/sun4i: tv: Merge mode_set into atomic_enable

Our mode_set implementation can be merged into our atomic_enable
implementation to simplify things, so let's do this.

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-36-459522d653a7@cerno.tech

drm/i915: Set correct domains values at _i915_vma_move_to_active

Fix regression introduced by commit:
"drm/i915: Individualize fences before adding to dma_resv obj"
which sets obj->read_domains to 0 for both read and write paths.
Also set obj->write_domain to 0 on read path which was removed by
the commit.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/6639
Fixes: 420a07b841d0 ("drm/i915: Individualize fences before adding to dma_resv obj")
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Cc: <stable@vger.kernel.org> # v5.16+
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907172641.12555-1-nirmoy.das@intel.com

drm/i915: Rename ggtt_view as gtt_view

So far, different views (normal, partial, rotated and remapped)
into the same object are only supported for GGTT mappings.
But with the upcoming VM_BIND feature, PPGTT will also use the
partial view mapping. Hence rename ggtt_view to more generic
gtt_view.

Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901183854.3446-1-niranjana.vishwanathapura@intel.com

drm/ssd130x: Replace simple display helpers with the atomic helpers

The simple display pipeline is a set of helpers that can be used by DRM
drivers to avoid dealing with all the needed components and just define
a few functions to operate a simple display device with one full-screen
scanout buffer feeding a single output.

But it is arguable that this provides the correct level of abstraction
for simple drivers, and recently some have been ported from using these
simple display helpers to use the regular atomic helpers instead.

The rationale for this is that the simple display pipeline helpers don't
hide that much of the DRM complexity, while adding an indirection layer
that conflates the concepts of CRTCs and planes. This makes the helpers
less flexible and harder to be reused among different graphics drivers.

Also, for simple drivers, using the full atomic helpers doesn't require
a lot of additional code. So adding a simple display pipeline layer may
not be worth it.

For these reasons, let's follow that trend and make ssd130x a plain DRM
driver that creates its own primary plane, CRTC, enconder and connector.

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905222759.2597186-1-javierm@redhat.com

drm/amd/amdgpu: Add missing CGTS*TCC_DISABLE to 10.3 headers

The TCC_DISABLE registers were not included in the 10.3 headers and
instead just placed directly in the gfx_v10_0.c source.  This patch
adds them to the headers so tools like umr can scan them and support them.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: prevent toc firmware memory leak

It's missed in psp fini.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct doorbell range/size value for CSDMA_DOORBELL_RANGE

current function mixes CSDMA_DOORBELL_RANGE and SDMA0_DOORBELL_RANGE
range/size manipulation, while these 2 registers have difference size
field mask. Remove range/size manipulation for SDMA0_DOORBELL_RANGE.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Xiaojian Du <Xiaojian.Du@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: print address in hex format rather than decimal

Addresses should be printed in hex format.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove the unneeded result variable

Return the enable_link_dp() directly instead of storing it in another
redundant variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix memory leak when using debugfs_lookup()

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  Fix this up by properly
calling dput().

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: hersen wu <hersenxs.wu@amd.com>
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Thelford Williams <tdwilliamsiv@gmail.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Yongzhi Liu <lyz_cs@pku.edu.cn>
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add missing SetMGpuFanBoostLimitRpm mapping for SMU 13.0.7

Missing SetMGpuFanBoostLimitRpm mapping leads to loading failure for SMU
13.0.7.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: add rlc_firmware_header_v2_4 to amdgpu_firmware_header

Add missing structure to avoid incorrect size and version check.

Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: TA unload messages are not actually sent to psp when amdgpu is uninstalled

V1:
  The psp_cmd_submit_buf function is called by psp_hw_fini to send
TA unload messages to psp to terminate ras, asd and tmr. But when
amdgpu is uninstalled, drm_dev_unplug is called earlier than
psp_hw_fini in amdgpu_pci_remove, the calling order as follows:
static void amdgpu_pci_remove(struct pci_dev *pdev) {
drm_dev_unplug
......
amdgpu_driver_unload_kms->amdgpu_device_fini_hw->...
->.hw_fini->psp_hw_fini->...
->psp_ta_unload->psp_cmd_submit_buf
......
}
The program will return when calling drm_dev_enter in psp_cmd_submit_buf.

So the call to drm_dev_enter in psp_cmd_submit_buf should be
removed, so that the TA unload messages can be sent to the psp
when amdgpu is uninstalled.

V2:
1. Restore psp_cmd_submit_buf to its original code.
2. Move drm_dev_unplug call after amdgpu_driver_unload_kms in
   amdgpu_pci_remove.
3. Since amdgpu_device_fini_hw is called by amdgpu_driver_unload_kms,
   remove the unplug check to release device mmio resource in
   amdgpu_device_fini_hw before calling drm_dev_unplug.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915/uc: Add patch level version number support

With the move to un-versioned filenames, it becomes more difficult to
know exactly what version of a given firmware is being used. So add
the patch level version number to the debugfs output.

Also, support matching by patch level when selecting code paths for
firmware compatibility. While a patch level change cannot be backwards
breaking, it is potentially possible that a new feature only works
from a given patch level onwards (even though it was theoretically
added in an earlier version that bumped the major or minor version).

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906230147.479945-2-daniele.ceraolospurio@intel.com

drm/i915/uc: Support for version reduced and multiple firmware files

There was a misunderstanding in how firmware file compatibility should
be managed within i915. This has been clarified as:
  i915 must support all existing firmware releases forever
  new minor firmware releases should replace prior versions
  only backwards compatibility breaking releases should be a new file

This patch cleans up the single fallback file support that was added
as a quick fix emergency effort. That is now removed in preference to
supporting arbitrary numbers of firmware files per platform.

The patch also adds support for having GuC firmware files that are
named by major version only (because the major version indicates
backwards breaking changes that affect the KMD) and for having HuC
firmware files with no version number at all (because the KMD has no
interface requirements with the HuC).

For GuC, the driver will report via dmesg if the found file is older than
expected. For HuC, the KMD will no longer require updating for any new
HuC release so will not be able to report what the latest expected
version is.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906230147.479945-1-daniele.ceraolospurio@intel.com

drm/gma500: fix repeated words in comments

Delete the redundant word 'for'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907113927.35305-1-yuanjilin@cdjrlc.com

drm/qxl: fix the suspend/resume issue on qxl device

Details:
Currently, when trying to suspend and resume with qxl device，
there are some error messages after resuming,
eventually caused to black screen and can't be recovered.

The first error message:
[   64.668577][    C3] [drm] driver is in bug mode

This error is due to guest qxl driver
will call qxl_reinit_memslots(qdev) during system resume,
but didn't call qxl_io_reset(qdev) before this,
Then will cause the QXL_IO_MEMSLOT_ADD operation to fail on QEMU,
qxl->guest_bug flag will be set，As a result,
the QXL device can't communicate with guest qxl driver through the IO port.

after fix the first error,can success to resume and login to desktop,
but shortly after that will observe the second error message :
[  353.095343][  T863] qxl 0000:00:02.0: object_init failed for (262144, 0x00000001)
[  353.096660][  T863] [drm:qxl_gem_object_create [qxl]] *ERROR* Failed to allocate GEM object (260852, 1, 4096, -12)
[  353.097277][  T863] [drm:qxl_alloc_ioctl [qxl]] *ERROR* qxl_alloc_ioctl: failed to create gem ret=-12
[  368.197538][  T863] qxl 0000:00:02.0: object_init failed for (3149824, 0x00000001)
[  368.197541][  T863] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate VRAM BO

The problem is caused by calling qxl_ring_init_hdr(qdev->release_ring)
in qxl_drm_resume() function.
When do QXL_IO_RESET,QEMU will call init_qxl_ram(),
so params like prod,cons,notify_on_cons and notify_on_prod
will be set to default value.
Ring push/pop actions for release_ring can be performed normally.
But call qxl_ring_init_hdr(qdev->release_ring)
will eventually set notify_on_prod to number of QXL_RELEASE_RING_SIZE,
affect the value of notify in qxl_push_free_res() function always be false,
QEMU will no longer send events of QXL_INTERRUPT_DISPLAY to the
guest qxl driver，so qxl_ring_pop() will never been called anymore，
and can't do dma_fence_signal(),result to ttm_bo_wait_ctx(bo, ctx)
always return EBUSY,fail to call qxl_bo_create().

Test scenario:
1) start virtual machine with qemu command "-device qxl-vga"
2) click suspend botton to enter suspend mode
3) resume and observe the error message in kernel logs,screen will be black

Let's fix this by reset io and remove the qxl_ring_init_hdr calling.

Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Suggested-by: Ming Xie<xieming@kylinos.cn>
Link: http://patchwork.freedesktop.org/patch/msgid/20220907094423.93581-1-min_halo@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>