clk: qcom: gcc-msm8974: switch from sleep_clk_src to sleep_clk

gcc-msm8974 uses the registered sleep_clk_src clock, which is just a 1:1
fixed factor clock register on top of the board's sleep_clk. Switch the
driver to use the board sleep_clk directly.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228203725.3131237-1-dmitry.baryshkov@linaro.org

clk: qcom: mmcc-msm8998: get rid of test clock

The test clock apparently it's not used by anyone upstream. Remove it.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228185237.3111988-16-dmitry.baryshkov@linaro.org

clk: qcom: gcc-sdx55: get rid of test clock

The test clock apparently it's not used by anyone upstream. Remove it.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228185237.3111988-13-dmitry.baryshkov@linaro.org

clk: qcom: gcc-sdx55: use ARRAY_SIZE instead of specifying num_parents

Use ARRAY_SIZE() instead of manually specifying num_parents. This makes
adding/removing entries to/from parent_data/names/hws easy and errorproof.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228185237.3111988-12-dmitry.baryshkov@linaro.org

clk: qcom: gcc-sc7180: get rid of test clock

The test clock apparently it's not used by anyone upstream. Remove it.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228185237.3111988-11-dmitry.baryshkov@linaro.org

clk: qcom: gcc-msm8998: get rid of test clock

The test clock apparently it's not used by anyone upstream. Remove it.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228185237.3111988-10-dmitry.baryshkov@linaro.org

clk: qcom: dispcc-qcm2290: get rid of test clock

The test clock apparently it's not used by anyone upstream. Remove it.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228185237.3111988-9-dmitry.baryshkov@linaro.org

dt-bindings: clock: qcom: gcc-sm8450: drop test clock

The test clock apparently it's not used by anyone upstream. Remove it.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228185237.3111988-8-dmitry.baryshkov@linaro.org

dt-bindings: clock: qcom: gcc-sm8350: drop test clock

The test clock apparently it's not used by anyone upstream. Remove it.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228185237.3111988-7-dmitry.baryshkov@linaro.org

dt-bindings: clock: qcom,mmcc-msm8998: drop core_bi_pll_test_se

The test clock apparently it's not used by anyone upstream. Remove it.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228185237.3111988-6-dmitry.baryshkov@linaro.org

dt-bindings: clock: qcom,gcc-sdx65: drop core_bi_pll_test_se

The test clock apparently it's not used by anyone upstream. Remove it.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228185237.3111988-4-dmitry.baryshkov@linaro.org

dt-bindings: clock: qcom,gcc-sdx55: drop core_bi_pll_test_se

The test clock apparently it's not used by anyone upstream. Remove it.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228185237.3111988-3-dmitry.baryshkov@linaro.org

dt-bindings: clock: qcom,gcc-msm8998: drop core_bi_pll_test_se

The test clock apparently it's not used by anyone upstream. Remove it.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228185237.3111988-2-dmitry.baryshkov@linaro.org

clk: gcc-sm8350: drop PLL test clock

There is no user of core_bi_pll_test_se test clock so drop it.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228140917.118861-3-krzysztof.kozlowski@linaro.org

clk: gcc-sm8150: drop PLL test clock

There is no user of core_bi_pll_test_se test clock so drop it.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228140917.118861-2-krzysztof.kozlowski@linaro.org

dt-bindings: clock: qcom,gcc-sm8350: drop core_bi_pll_test_se input

Drop unused core_bi_pll_test_se clock input to the clock controller.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228140917.118861-1-krzysztof.kozlowski@linaro.org

dt-bindings: clock: qcom,spmi-clkdiv: convert to DT schema

Convert Qualcomm SPMI PMIC clock divider bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221223111835.37610-1-krzysztof.kozlowski@linaro.org

clk: qcom: clk-spmi-pmic-div: convert to use parent_data

The clk-spmi-pmic-div driver gets the parent name from the first (and
the only) clock parent. So, use parent data, index 0 to setup the clock.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221210191013.453040-1-dmitry.baryshkov@linaro.org

clk: qcom: gcc-sm6375: use parent_hws for gcc_disp_gpll0_div_clk_src

Change gpll0 to use parent_hws instead of parent_names for
gcc_disp_gpll0_div_clk_src clock.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221210190712.451247-2-dmitry.baryshkov@linaro.org

clk: qcom: dispcc-sm6115: use parent_hws for disp_cc_mdss_rot_clk

Rework disp_cc_mdss_rot_clk to use parent_hws instead of parent_names.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221210190712.451247-1-dmitry.baryshkov@linaro.org

clk: qcom: videocc-sm8250: switch to devm_pm_runtime_enable

Switch to using the devm_pm_runtime_enable() instead of hand-coding
corresponding action to call pm_runtime_disable().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-22-dmitry.baryshkov@linaro.org

clk: qcom: lpasscc-sc7280: switch to devm_pm_runtime_enable

Switch to using the devm_pm_runtime_enable() instead of hand-coding
corresponding action to call pm_runtime_disable().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-21-dmitry.baryshkov@linaro.org

clk: qcom: dispcc-sm8450: switch to devm_pm_runtime_enable

Switch to using the devm_pm_runtime_enable() instead of hand-coding
corresponding action to call pm_runtime_disable().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-20-dmitry.baryshkov@linaro.org

clk: qcom: dispcc-sm8250: switch to devm_pm_runtime_enable

Switch to using the devm_pm_runtime_enable() instead of hand-coding
corresponding action to call pm_runtime_disable().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-19-dmitry.baryshkov@linaro.org

clk: qcom: lpasscc-sc7180: switch to parent_hws

Change several entries of parent_data to use parent_hws instead, which
results in slightly more ovbious code.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-18-dmitry.baryshkov@linaro.org

clk: qcom: gpucc-sc7180: switch to parent_hws

Change several entries of parent_data to use parent_hws instead, which
results in slightly more ovbious code.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-17-dmitry.baryshkov@linaro.org

clk: qcom: gpucc-msm8998: switch to parent_hws

Switch gfx3d_clk_src parents to use parent_hws instead of parent_data,
to clarify that these clocks are internal.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[bjorn: Updated commit message]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-16-dmitry.baryshkov@linaro.org

clk: qcom: gcc-sm8550: switch to parent_hws

Change several entries of parent_data to use parent_hws instead, which
results in slightly more ovbious code.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-15-dmitry.baryshkov@linaro.org

clk: qcom: gcc-sm8450: switch to parent_hws

Change several entries of parent_data to use parent_hws instead, which
results in slightly more ovbious code.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-14-dmitry.baryshkov@linaro.org

clk: qcom: gcc-sm8250: switch to parent_hws

Change several entries of parent_data to use parent_hws instead, which
results in slightly more ovbious code.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-13-dmitry.baryshkov@linaro.org

clk: qcom: gcc-sm6375: switch to parent_hws

Change several entries of parent_data to use parent_hws instead, which
results in slightly more ovbious code.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-12-dmitry.baryshkov@linaro.org

clk: qcom: gcc-sdx65: switch to parent_hws

Change several entries of parent_data to use parent_hws instead, which
results in slightly more ovbious code.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-11-dmitry.baryshkov@linaro.org

clk: qcom: gcc-sc7280: switch to parent_hws

Change several entries of parent_data to use parent_hws instead, which
results in slightly more ovbious code.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-10-dmitry.baryshkov@linaro.org

clk: qcom: gcc-sc7180: switch to parent_hws

Change several entries of parent_data to use parent_hws instead, which
results in slightly more ovbious code.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-9-dmitry.baryshkov@linaro.org

clk: qcom: gcc-msm8976: switch to parent_hws

Change several entries of parent_data to use parent_hws instead, which
results in slightly more ovbious code.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-8-dmitry.baryshkov@linaro.org

clk: qcom: gcc-msm8939: switch to parent_hws

Change several entries of parent_data to use parent_hws instead, which
results in slightly more ovbious code.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-7-dmitry.baryshkov@linaro.org

clk: qcom: camcc-sm8450: switch to parent_hws

Change several entries of parent_data to use parent_hws instead, which
results in slightly more ovbious code.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-6-dmitry.baryshkov@linaro.org

clk: qcom: camcc-sc7280: switch to parent_hws

Change several entries of parent_data to use parent_hws instead, which
results in slightly more ovbious code.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-5-dmitry.baryshkov@linaro.org

clk: qcom: dispcc-sm6375: switch to parent_hws

Change several entries of parent_data to use parent_hws instead, which
results in slightly more ovbious code.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-4-dmitry.baryshkov@linaro.org

clk: qcom: dispcc-sc7180: switch to parent_hws

Change several entries of parent_data to use parent_hws instead, which
results in slightly more ovbious code.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-3-dmitry.baryshkov@linaro.org

clk: qcom: dispcc-sm8450: switch to parent_hws

Change several entries of parent_data to use parent_hws instead, which
results in slightly more ovbious code.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103145515.1164020-2-dmitry.baryshkov@linaro.org

Merge branch '20230104093450.3150578-2-abel.vesa@linaro.org' into clk-for-6.3

dt-bindings: clock: Add SM8550 TCSR CC clocks

Add bindings documentation for clock TCSR driver on SM8550.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104093450.3150578-2-abel.vesa@linaro.org

clk: qcom: add SM8550 DISPCC driver

Add support for the display clock controller found in SM8550
based devices.

This clock controller feeds the Multimedia Display SubSystem (MDSS).
This driver is based on the SM8450 support.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103-topic-sm8550-upstream-dispcc-v3-3-8a03d348c572@linaro.org

clk: qcom: clk-alpha-pll: define alias of LUCID OLE reset ops to EVO reset ops

Add an alias of LUCID OLE reset ops to EVO reset ops similar
to other aliases.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103-topic-sm8550-upstream-dispcc-v3-2-8a03d348c572@linaro.org

dt-bindings: clock: document SM8550 DISPCC clock controller

Document device tree bindings for display clock controller for
Qualcomm SM8550 SoC.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103-topic-sm8550-upstream-dispcc-v3-1-8a03d348c572@linaro.org

Merge tag '1672656511-1931-1-git-send-email-quic_akhilpo@quicinc.com' into clk-for-6.3

v6.2-rc1 + 1672656511-1931-1-git-send-email-quic_akhilpo@quicinc.com

clk: qcom: gdsc: Support 'synced_poweroff' genpd flag

Add support for the newly added 'synced_poweroff' genpd flag. This allows
some clients (like adreno gpu driver) to request gdsc driver to ensure
a votable gdsc (like gpucc cx gdsc) has collapsed at hardware.

Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102161757.v5.2.Ic128c1df50b7fc9a6b919932a3b41a799b5ed5e8@changeid

PM: domains: Allow a genpd consumer to require a synced power off

Some genpd providers doesn't ensure that it has turned off at hardware.
This is fine until the consumer really requires during some special
scenarios that the power domain collapse at hardware before it is
turned ON again.

An example is the reset sequence of Adreno GPU which requires that the
'gpucc cx gdsc' power domain should move to OFF state in hardware at
least once before turning in ON again to clear the internal state.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102161757.v5.1.I3e6b1f078ad0f1ca9358c573daa7b70ec132cdbe@changeid

clk: qcom: sdm845: Use generic clk_sync_state_disable_unused callback

By adding the newly added clk_sync_state_disable_unused as sync_state
callback to all sdm845 clock providers, we make sure that no clock
belonging to these providers gets disabled on clk_disable_unused,
but rather they are disabled on sync_state, when it is safe, since
all the consumers build as modules have had their chance of enabling
their own clocks.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221227204528.1899863-2-abel.vesa@linaro.org

clk: Add generic sync_state callback for disabling unused clocks

There are unused clocks that need to remain untouched by clk_disable_unused,
and most likely could be disabled later on sync_state. So provide a generic
sync_state callback for the clock providers that register such clocks.
Then, use the same mechanism as clk_disable_unused from that generic
callback, but pass the device to make sure only the clocks belonging to
the current clock provider get disabled, if unused. Also, during the
default clk_disable_unused, if the driver that registered the clock has
the generic clk_sync_state_disable_unused callback set for sync_state,
skip disabling its clocks.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221227204528.1899863-1-abel.vesa@linaro.org

clk: qcom: rpmh: add clocks for sa8775p

Extend the driver with a description of clocks for sa8775p platforms.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109174511.1740856-6-brgl@bgdev.pl

dt-bindings: clock: qcom-rpmhcc: document the clock for sa8775p

Add a new compatible for SA8775P platforms.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109174511.1740856-5-brgl@bgdev.pl

clk: qcom: krait-cc: fix wrong pointer passed to IS_ERR()

It should be 'mux' passed to IS_ERR/PTR_ERR().

Fixes: 56a655e1c41a ("clk: qcom: krait-cc: convert to parent_data API")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104080235.1748953-1-yangyingliang@huawei.com

clk: qcom: Add TCSR clock driver for SM8550

The TCSR clock controller found on SM8550 provides refclks
for PCIE, USB and UFS. Add clock driver for it.

This patch is based on initial code downstream.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104093450.3150578-5-abel.vesa@linaro.org

clk: qcom: rpmh: Add support for SM8550 rpmh clocks

Adds the RPMH clocks present in SM8550 SoC.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104093450.3150578-4-abel.vesa@linaro.org

dt-bindings: clock: Add RPMHCC for SM8550

Add bindings and update documentation for clock rpmh driver on SM8550.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104093450.3150578-3-abel.vesa@linaro.org

dt-bindings: clock: Add SM8550 TCSR CC clocks

Add bindings documentation for clock TCSR driver on SM8550.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104093450.3150578-2-abel.vesa@linaro.org

dt-bindings: clock: qcom,gcc-sc8280xp: document power domain

GCC clock controller is supplied by CX power domain:

  sc8280xp-crd.dtb: clock-controller@100000: Unevaluated properties are not allowed ('power-domains' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102085909.24620-1-krzysztof.kozlowski@linaro.org

clk: qcom: dispcc-sm6125: Fix compatible string to match bindings

According to generic rules the SoC name should be first:

        arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dtb: clock-controller@5f00000: compatible: 'oneOf' conditional failed, one must be fixed:
                'qcom,dispcc-sm6125' does not match '^qcom,(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+-.*$'

And this is already reflected by the bindings submitted prior to the
addition of this driver.  Any DTS following these rules will end up with
a non-probing driver because of this mismatch.

Fixes: 6e87c8f07407 ("clk: qcom: Add display clock controller driver for SM6125")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222210140.278077-1-marijn.suijten@somainline.org

clk: qcom: Add camera clock controller driver for SM6350

Add support for the camera clock controller found on SM6350.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213152617.296426-2-konrad.dybcio@linaro.org

dt-bindings: clock: add QCOM SM6350 camera clock bindings

Add device tree bindings for camera clock controller for
Qualcomm Technology Inc's SM6350 SoC.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213152617.296426-1-konrad.dybcio@linaro.org

clk: qcom: smd-rpm: remove usage of platform name

Now that all clocks have individual names, remove the names of SoCs from
the SMD RPM clock definitions. Replace it with the common clk_smd_rpm_ prefix.

Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-20-dmitry.baryshkov@linaro.org

clk: qcom: smd-rpm: rename SMD_RPM_BUS clocks

Add special macro for the clocks of QCOM_SMD_RPM_BUS_CLK type. Use it to
insert the _bus_N part into the clock symbol name. The system (and
userspace) name of these clocks remains intact.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-19-dmitry.baryshkov@linaro.org

clk: qcom: smd-rpm: rename the qcm2290 rf_clk3 clocks

Rename the qcm2290_rf_clk3 clocks adding 38m4 prefix to distinguish it
from the common (19.2 MHz) rf_clk3. The system (and userspace) name of
these clocks remains intact.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-18-dmitry.baryshkov@linaro.org

clk: qcom: smd-rpm: rename SMD_RPM_BRANCH clock symbols

To ease distinguishing between branch and non-branch clocks (e.g.
aggre1_noc, aggre2_noc and qdss) add '_branch' to all SMD_RPM_BRANCH*
clocks. The system (and userspace) name of these clocks remains intact.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-17-dmitry.baryshkov@linaro.org

clk: qcom: smd-rpm: simplify SMD_RPM/_BRANCH/_QDSS clock definitions

Remove the duplication between the names of the normal and active-only
clocks by moving common sufixes to the clock definition macros. This
simplifies adding new clock definitions and reviewing existing defs.

Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-16-dmitry.baryshkov@linaro.org

clk: qcom: smd-rpm: simplify XO_BUFFER clocks definitions

Remove the duplication between the names of the normal and active-only
XO_BUFFER and XO_BUFFER_PINCTRL clocks by using preprocessor logic to
add _a suffix.

Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-15-dmitry.baryshkov@linaro.org

clk: qcom: smd-rpm: rename some msm8974 active-only clocks

Rename msm8974_diff_a_clk, msm8974_div_a_clk1 and msm8974_div_a_clk2 to
move the _a suffix to the end of the name. This follows the pattern used
by other active-only clocks and thus makes it possible to simplify clock
definitions.
This changes the userspace-visible names for this clocks.

Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-14-dmitry.baryshkov@linaro.org

clk: qcom: smd-rpm: move clock definitions together

To ease review and reuse group all clock definitions together.

Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-13-dmitry.baryshkov@linaro.org

clk: qcom: smd-rpm: fix alignment of line breaking backslashes

The commit 52a436e0b7fe ("clk: qcom: smd-rpm: Switch to parent_data")
introduced ragged right alignment for the line breaking backslash. Fix
it to make the code look consistently.

Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-12-dmitry.baryshkov@linaro.org

clk: qcom: smd-rpm: drop the rpm_status_id field

The rpm_status_id field is a leftover from the non-SMD clocks. It is of
no use for the SMD-RPM clock driver and is always equal to zero. Drop it
completely.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-11-dmitry.baryshkov@linaro.org

clk: qcom: smd-rpm: add XO_BUFFER clock for each XO_BUFFER_PINCTRL clock

For each XO_BUFFER_PINCTRL there is a corresponding XO_BUFFER clock.
Add them automatically to drop the duplication between the clock
definitions.

Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-10-dmitry.baryshkov@linaro.org

clk: qcom: smd-rpm: remove duplication between sm6375 and sm6125 clocks

Reuse sm6125's MMAXI clocks for sm6375.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-9-dmitry.baryshkov@linaro.org

clk: qcom: smd-rpm: rename msm8992_ln_bb_* clocks to qcs404_ln_bb_*

For each of XO_BUFFER_PINCTRL clocks there is a corresponding XO_BUFFER clock
with the similar name (e.g. msm8998_ln_bb_clk3_pin vs
msm8998_ln_bb_clk3). For qcs404_ln_bb_clk_pin there is no
qcs404_ln_bb_clk, since the msm8992_ln_bb_clk was used instead (even for
qcs404 platform).

Follow the usual practice and rename msm8992_ln_bb_clk clocks to
qcs404_ln_bb_clk (and rename active-only clock in a similar way).

This is a preparation step for the next patch, which will merge
XO_BUFFER and XO_BUFFER_PINCTRL definitions.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-8-dmitry.baryshkov@linaro.org

clk: qcom: smd-rpm: use msm8998_ln_bb_clk2 for qcm2290 SoC

The qcm2290's ln_bb_clk2 is identical to the freshly added msm8998's
ln_bb_clk2 one. Use the latter and drop the SoC-specific version.

Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-7-dmitry.baryshkov@linaro.org

clk: qcom: smd-rpm: add missing ln_bb_clkN clocks

Newer platforms (msm8998, sdm660, sm6125) have low noise LN_BB_CLKn
clocks. The driver already uses proper clock indices
(RPM_SMD_LN_BB_CLKn). Fix clock names used by these platforms.

Fixes: a0384ecfe2aa ("clk: qcom: smd-rpm: De-duplicate identical entries")
Fixes: edeb2ca74716 ("clk: qcom: smd: Add support for SM6125 rpm clocks")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-6-dmitry.baryshkov@linaro.org

clk: qcom: smd-rpm: remove duplication between qcs404 and qcm2290 clocks

Reuse qcs404's QPIC and BIMC_GPU clock for qcm2290.

Fixes: 78b727d02815 ("clk: qcom: smd-rpm: Add QCM2290 RPM clock support")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-5-dmitry.baryshkov@linaro.org

clk: qcom: smd-rpm: remove duplication between MMXI and MMAXI defines

The commit 644c42295592 ("clk: qcom: smd: Add SM6375 clocks") added a
duplicate of the existing define QCOM_SMD_RPM_MMAXI_CLK, drop it now.

Fixes: 644c42295592 ("clk: qcom: smd: Add SM6375 clocks")
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-4-dmitry.baryshkov@linaro.org

clk: qcom: smd-rpm: enable pin-controlled ln_bb_clk clocks on qcs404

The commit eaeee28db289 ("clk: qcom: smd: Add support for QCS404 rpm
clocks") defined the pin-controlled ln_bb_clk clocks, but didn't add
them to the qcs404_clks array. Add them to make these clocks usable to
platform devices.

Fixes: eaeee28db289 ("clk: qcom: smd: Add support for QCS404 rpm clocks")
Reviewed-by: Alex Elder <elder@linaro.org?
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-3-dmitry.baryshkov@linaro.org

dt-bindings: clocks: qcom: rpmcc: add LN_BB_CLK_PIN clocks

Add pin-controlled Low-Noise BB clock definition.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-2-dmitry.baryshkov@linaro.org

clk: qcom: gcc-sm6115: Use floor_ops for SDCC1/2 core clk

Just like in case of other SoCs change SDCC1/SDCC2 ops
to floor to avoid overclocking the controller.

Fixes: cbe63bfdc54f ("clk: qcom: Add Global Clock controller (GCC) driver for SM6115")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Iskren Chernev <me@iskren.info>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209123910.178609-1-konrad.dybcio@linaro.org

clk: qcom: gcc-qcs404: add support for GDSCs

Add support for two GDSCs provided by this clock controller.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221226042154.2666748-13-dmitry.baryshkov@linaro.org

clk: qcom: gcc-qcs404: sort out the cxo clock

The GCC driver registers the cxo clock as a thin wrapper around board's
xo_board clock. Nowadays we can use the xo_board directly in all the
clocks that use it. Use the fw_name "cxo" for this clock.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221226042154.2666748-12-dmitry.baryshkov@linaro.org

clk: qcom: gcc-qcs404: use parent_hws/_data instead of parent_names

Convert the clock driver to specify parent data rather than parent
names, to actually bind using 'clock-names' specified in the DTS rather
than global clock names. Use parent_hws where possible to refer parent
clocks directly, skipping the lookup.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221226042154.2666748-11-dmitry.baryshkov@linaro.org

clk: qcom: gcc-qcs404: move PLL clocks up

Move PLL clock declarations up, before clock parent tables, so that we
can use pll hw clock fields in the next commit.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221226042154.2666748-10-dmitry.baryshkov@linaro.org

clk: qcom: gcc-qcs404: get rid of the test clock

The test clock isn't in the bindings and apparently it's not used by
anyone upstream.  Remove it.

Suggested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221226042154.2666748-9-dmitry.baryshkov@linaro.org

clk: qcom: gcc-qcs404: fix the name of the HDMI PLL clock

The QCS404 uses 28nm HDMI PHY. The in-kernel driver doesn't provide the
PLL (yet), but the out of tree patches used the name "hdmi_pll" for it.
Other Qualcomm HDMI PHYs use either the name "hdmi_pll" (8960) or
"hdmipll" (8996). Thus change the expected HDMI PLL clock name to
"hdmi_pll".

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221226042154.2666748-8-dmitry.baryshkov@linaro.org

clk: qcom: gcc-qcs404: fix names of the DSI clocks used as parents

The QCS404 uses 28nm LPM DSI PHY, which registers dsi0pll and
dsi0pllbyte clocks. Fix all DSI PHY clock names used as parents inside
the GCC driver.

Fixes: 652f1813c113 ("clk: qcom: gcc: Add global clock controller driver for QCS404")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221226042154.2666748-7-dmitry.baryshkov@linaro.org

clk: qcom: gcc-qcs404: disable gpll[04]_out_aux parents

On the QCS404 platform the driver for the Global Clock Controller
doens't define gpll0_out_aux and gpll4_out_aux clocks, so it's not
possible to use them as parents. Remove entries for these clocks.

Note: backporting this patch to earlier kernels would also require a
previous patch which switches the gcc driver to use ARRAY_SIZE for
parent data arrays.

Fixes: 652f1813c113 ("clk: qcom: gcc: Add global clock controller driver for QCS404")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221226042154.2666748-6-dmitry.baryshkov@linaro.org

clk: qcom: gcc-qcs404: use ARRAY_SIZE instead of specifying num_parents

Use ARRAY_SIZE() instead of manually specifying num_parents. This makes
adding/removing entries to/from parent_data/names/hws easy and errorproof.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221226042154.2666748-5-dmitry.baryshkov@linaro.org

dt-bindings: clock: qcom: gcc-qcs404: define clocks/clock-names for QCS404

Define clock/clock-names properties of the GCC device node to be used
on QCS404 platform.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221226042154.2666748-4-dmitry.baryshkov@linaro.org

dt-bindings: clock: qcom: gcc-qcs404: switch to gcc.yaml

Now as the gcc-qcs404 gained support for GDSC and requires using
the #power-domain-cells property, switch the qcom,gcc-qcs404.yaml schema
to use common gcc.yaml.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221226042154.2666748-3-dmitry.baryshkov@linaro.org

dt-bindings: clock: qcom: gcc-qcs404: add two GDSC entries

On QCS404 platform the Global Clock Controller supports two GDSCs: MDSS
(display) and OXILI (GPU). Add corresponding indices.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221226042154.2666748-2-dmitry.baryshkov@linaro.org

Linux 6.2-rc1

treewide: Convert del_timer*() to timer_shutdown*()

Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown".  After a timer is set to this state, then it can no
longer be re-armed.

The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed.  It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.

This was created by using a coccinelle script and the following
commands:

    $ cat timer.cocci
    @@
    expression ptr, slab;
    identifier timer, rfield;
    @@
    (
    -       del_timer(&ptr->timer);
    +       timer_shutdown(&ptr->timer);
    |
    -       del_timer_sync(&ptr->timer);
    +       timer_shutdown_sync(&ptr->timer);
    )
      ... when strict
          when != ptr->timer
    (
            kfree_rcu(ptr, rfield);
    |
            kmem_cache_free(slab, ptr);
    |
            kfree(ptr);
    )

    $ spatch timer.cocci . > /tmp/t.patch
    $ patch -p1 < /tmp/t.patch

Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'spi-fix-v6.2-rc1' of git://git./linux/kernel/git/broonie/spi

Pull spi fix from Mark Brown:
 "One driver specific change here which handles the case where a SPI
  device for some reason tries to change the bus speed during a message
  on fsl_spi hardware, this should be very unusual"

* tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fsl_spi: Don't change speed while chipselect is active

Merge tag 'regulator-fix-v6.2-rc1' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Two core fixes here, one for a long standing race which some Qualcomm
  systems have started triggering with their UFS driver and another
  fixing a problem with supply lookup introduced by the fixes for devm
  related use after free issues that were introduced in this merge
  window"

* tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: core: fix deadlock on regulator enable
  regulator: core: Fix resolve supply lookup issue

Merge tag 'coccinelle-6.2' of git://git./linux/kernel/git/jlawall/linux

Pull coccicheck update from Julia Lawall:
 "Modernize use of grep in coccicheck:

  Use 'grep -E' instead of 'egrep'"

* tag 'coccinelle-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  scripts: coccicheck: use "grep -E" instead of "egrep"

Merge tag 'hardening-v6.2-rc1-fixes' of git://git./linux/kernel/git/kees/linux

Pull kernel hardening fixes from Kees Cook:

 - Fix CFI failure with KASAN (Sami Tolvanen)

 - Fix LKDTM + CFI under GCC 7 and 8 (Kristina Martsenko)

 - Limit CONFIG_ZERO_CALL_USED_REGS to Clang > 15.0.6 (Nathan
   Chancellor)

 - Ignore "contents" argument in LoadPin's LSM hook handling

 - Fix paste-o in /sys/kernel/warn_count API docs

 - Use READ_ONCE() consistently for oops/warn limit reading

* tag 'hardening-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  cfi: Fix CFI failure with KASAN
  exit: Use READ_ONCE() for all oops/warn limit reads
  security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6
  lkdtm: cfi: Make PAC test work with GCC 7 and 8
  docs: Fix path paste-o for /sys/kernel/warn_count
  LoadPin: Ignore the "contents" argument of the LSM hooks