Tomas Winkler [Mon, 21 Feb 2011 11:23:25 +0000 (13:23 +0200)]
staging/easycap: fix style issues in easycap_usb_probe function
fix some code styles and drop too verbose printouts
and non relevant code
Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Wed, 23 Feb 2011 22:12:25 +0000 (14:12 -0800)]
Revert "staging: iio: ak8975: add platform data."
This reverts commit
f2f1794835f1d8900d2b15d114c54e70c849809b.
It should not be putting code into the include/input/ directory, and
lots of other people have complained about it.
Cc: Tony SIM <chinyeow.sim.xt@renesas.com>
Cc: Andrew Chew <achew@nvidia.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike McCormack [Sun, 20 Feb 2011 15:05:19 +0000 (00:05 +0900)]
staging: rtl8192e: Remove struct member irq_mask
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike McCormack [Sun, 20 Feb 2011 15:04:54 +0000 (00:04 +0900)]
staging: rtl8192e: Make RT_TRACE use consistent
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike McCormack [Sun, 20 Feb 2011 15:04:21 +0000 (00:04 +0900)]
staging: rtl8192e: Make functions static
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike McCormack [Sun, 20 Feb 2011 15:04:02 +0000 (00:04 +0900)]
staging: rtl8192e: Delete dead code
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike McCormack [Sun, 20 Feb 2011 15:03:36 +0000 (00:03 +0900)]
staging: rtl8192e: Remove externs, redundant comments
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike McCormack [Sun, 20 Feb 2011 15:03:20 +0000 (00:03 +0900)]
staging: rtl8192e: Remove USB related code
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike McCormack [Sun, 20 Feb 2011 15:03:08 +0000 (00:03 +0900)]
staging: rtl8192e: Remove useless usermode callback
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Wed, 23 Feb 2011 11:48:53 +0000 (12:48 +0100)]
staging: brcm80211: added locks in wl_mac80211.c
Increasing robustness of the code, although no problem has been reported
in the field. Several code paths were unshielded for multi thread access.
Several lock acquisitions have been added to wl_mac80211.c
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Wed, 23 Feb 2011 11:48:52 +0000 (12:48 +0100)]
staging: brcm80211: removed locks around Mac80211 calls
A spinlock was acquired prior to calling the Mac80211 functions
ieee80211_wake_queues() and ieee80211_stop_queues() and Cfg80211 functions
wiphy_rfkill_set_hw_state() and wiphy_rfkill_start_polling().
This is not required and could even lead to instability. Therefore the locks
were removed.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Wed, 23 Feb 2011 11:48:51 +0000 (12:48 +0100)]
staging: brcm80211: cosmetic changes
Code cleanup. Added lock related comments to wl_mac80211.c. Also removed a
redundant function definition.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 22 Feb 2011 10:12:10 +0000 (11:12 +0100)]
staging: brcm80211: remove some bsscfg attribute that are redundant
In the struct wlc_bsscfg a couple of attribute were held under a
preprocessor definition, but these are not needed in the mac80211
driver context.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 22 Feb 2011 10:12:09 +0000 (11:12 +0100)]
staging: brcm80211: allow changing channel by mac80211 when associated
When associated on 5G the driver receives a probe request for 2G with
a 2G rate specified. The driver asserts as the operating band is still
5G when the probe request packet is given. Root cause was that ioctl
function did fail upon setting the channel as requested by mac80211
when we are associated.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stanislav Fomichev [Mon, 21 Feb 2011 07:35:26 +0000 (10:35 +0300)]
staging: brcm80211: remove the rest of broadcom specific byte swapping routines
- move ltoh16_buf/htol16_buf util/bcmsrom.c
- replace ltoh16_buf in brcmsmac/wlc_mac80211.c with several
le16_to_cpu's
Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stanislav Fomichev [Sun, 20 Feb 2011 18:43:35 +0000 (21:43 +0300)]
staging: brcm80211: replace htod/dtoh broadcom defines
htod32 -> cpu_to_le32
htod16 -> cpu_to_le16
dtoh32 -> le32_to_cpu
dtoh16 -> le16_to_cpu
For brcmfmac/dhd_common.c just removed defines.
Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stanislav Fomichev [Sun, 20 Feb 2011 18:43:34 +0000 (21:43 +0300)]
staging: brcm80211: remove unused broadcom byte swapping macroses
- BCMSWAP32
- bcmswap32
- BCMSWAP32BY16
- bcmswap32by16
Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stanislav Fomichev [Sun, 20 Feb 2011 18:43:33 +0000 (21:43 +0300)]
staging: brcm80211: replace broadcom specific unaligned byte swapping routines
htol16_ua_store -> put_unaligned_le16
htol32_ua_store -> put_unaligned_le32
hton16_ua_store -> put_unaligned_be16
hton32_ua_store -> put_unaligned_be32
ltoh16_ua -> get_unaligned_le16
ltoh32_ua -> get_unaligned_le32
ntoh16_ua -> get_unaligned_be16
ntoh32_ua -> get_unaligned_be32
removed unused:
- load32_ua
- load16_ua
- store32_ua
- store16_ua
- ltoh_ua
- ntoh_au
Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stanislav Fomichev [Sun, 20 Feb 2011 18:43:32 +0000 (21:43 +0300)]
staging: brcm80211: replace broadcom specific byte swapping routines
HTON16/hton16 -> cpu_to_be16 (htons for networking code)
HTON32/hton32 -> cpu_to_be32 (htonl for networking code)
NTOH16/ntoh32 -> be16_to_cpu (ntohs for networking code)
NTOH32/ntoh32 -> be32_to_cpu (ntohl for networking code)
LTOH16/ltoh16 -> le16_to_cpu
LTOH32/ltoh32 -> le32_to_cpu
HTOL16/htol16 -> cpu_to_le16
HTOL32/htol32 -> cpu_to_le32
Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Mon, 21 Feb 2011 08:07:12 +0000 (09:07 +0100)]
staging: brcm80211: bugfix for crash on heavy transmit traffic
With heavy transmit traffic, once in a while (range 15mins-1hr)
a tx packet was added to a full transmit queue. Under certain
conditions an other packet in the queue gets bumped to make room
for the new packet. This is not considered an error condition, but
normal operation. Despite that, there was an ASSERT(0) that caused
the driver to oops. The ASSERT(0) has been removed. Driver was tested
afterwards.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nitin Gupta [Fri, 18 Feb 2011 22:33:18 +0000 (17:33 -0500)]
staging: Allow sharing xvmalloc for zram and zcache
Both zram and zcache use xvmalloc allocator. If xvmalloc
is compiled separately for both of them, we will get linker
error if they are both selected as "built-in". We can also
get linker error regarding missing xvmalloc symbols if zram
is not built.
So, we now compile xvmalloc separately and export its symbols
which are then used by both of zram and zcache.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Sun, 20 Feb 2011 15:00:38 +0000 (07:00 -0800)]
staging: ath6kl: Eliminate cfg80211 warnings
Cancel the pending scan operation once the interface is going down to
avoid warnings from the cfg80211 module. Once the interface is down,
cfg80211 checks for any pending scan requests and dumps a warning if it
finds one. It expects the driver to abort any ongoing scan operation
once the driver detects that the interface is going down.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Carpenter [Sun, 20 Feb 2011 12:49:53 +0000 (15:49 +0300)]
staging: ath6kl: buffer overflow in SEND_FRAME ioctl
We should check that optTxFrmCmd.optIEDataLen isn't too large before we
copy it into the data buffer.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Vipin Mehta <vipin.mehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Carpenter [Sun, 20 Feb 2011 12:49:08 +0000 (15:49 +0300)]
staging: ath6kl: cleanup in SEND_FRAME ioctl
The original code was written in a funny way where every statement was
part of else if blocks. I broke them up into separate statements by
adding breaks on failure conditions.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Vipin Mehta <vipin.mehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Luis R. Rodriguez [Mon, 21 Feb 2011 05:11:41 +0000 (21:11 -0800)]
staging: ath6kl: update TODO file / maintainers
This updates the TODO file to reflect new changes on development.
Cc: Joe Perches <joe@perches.com>
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Wed, 23 Feb 2011 21:50:42 +0000 (13:50 -0800)]
Staging: gma500: fix up trailing whitespace errors
Lots of little ones all through the driver, mostly
all in a cut-and-paste header comment.
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Wed, 23 Feb 2011 21:47:57 +0000 (13:47 -0800)]
Staging: gma500: remove psb_gfx.mod.c
The mod.c file should not be part of the repo.
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Tue, 22 Feb 2011 14:27:58 +0000 (14:27 +0000)]
staging: gma500: Intel GMA500 staging driver
This is an initial staging driver for the GMA500. It's been stripped out
of the PVR drivers and crunched together from various bits of code and
different kernels.
Currently it's unaccelerated but still pretty snappy even compositing with
the frame buffer X server.
Lots of work is needed to rework the ttm and bo interfaces from being
ripped out and then 2D acceleration wants putting back for framebuffer and
somehow eventually via DRM.
There is no support for the parts without open source userspace (video
accelerators, 3D) as per kernel policy.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Joe Perches [Sat, 19 Feb 2011 23:45:29 +0000 (15:45 -0800)]
connector: Convert char *name to const char *name
Allow more const declarations.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Haiyang Zhang [Fri, 18 Feb 2011 23:05:53 +0000 (15:05 -0800)]
staging: hv: Fix the WARN_ON condition in free_net_device()
In a previous commit,
7a09876d, ASSERT was changed to WARN_ON, but
the condition wasn't updated. This patch fixed this error.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Haiyang Zhang [Fri, 18 Feb 2011 23:05:52 +0000 (15:05 -0800)]
staging: hv: Remove unnecessary ASSERTs in netvsc_initialize()
These fields have been assigned in netvsc_drv_init() before calling
netvsc_initialize(), so there is no need to check them.
The ASSERTs were already commented out, and this patch removes
them.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:16:09 +0000 (11:16 +0100)]
staging/trivial: fix typos concerning "select"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:16:08 +0000 (11:16 +0100)]
staging/trivial: fix typos concerning "memory"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:16:07 +0000 (11:16 +0100)]
staging/trivial: fix typos concerning "management"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:16:06 +0000 (11:16 +0100)]
staging/trivial: fix typos concerning "initiali[zs]e"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:16:05 +0000 (11:16 +0100)]
staging/trivial: fix typos concerning "implementation"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:16:04 +0000 (11:16 +0100)]
staging/trivial: fix typos concerning "function"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:16:03 +0000 (11:16 +0100)]
staging/trivial: fix typos concerning "failed"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:16:02 +0000 (11:16 +0100)]
staging/trivial: fix typos concerning "consistent"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:16:01 +0000 (11:16 +0100)]
staging/trivial: fix typos concerning "adjust"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:16:00 +0000 (11:16 +0100)]
staging/trivial: fix typos concerning "address"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:15:59 +0000 (11:15 +0100)]
staging/trivial: fix typos concerning "access"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:16 +0000 (13:13 -0800)]
staging: ath6kl: Fixing disappearing of scan list due to jiffies wrap over
When jiffies wrap-over, all the BSS in the cache is removed. Wrap-over of
jiffies is not handled in the correct way. This cause the scan list to go
empty during this time for a small duration
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:15 +0000 (13:13 -0800)]
staging: ath6kl: Fixing accidental overwriting of probed ssid list in the hardware
Fixing the code to avoid overwriting of the first index in the probed ssid
list maintained by the hardware. This index is used to store broadcast SSID.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:14 +0000 (13:13 -0800)]
staging: ath6kl: Adding state in driver to track the sme state
Adding state in driver to track the sme state. The connect/disconnect
events from the driver were messing up the state maintained within the
cfg80211 module.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:13 +0000 (13:13 -0800)]
staging: ath6kl: Fixing the cached copy of the BSS filter set by user
Fixing the cached copy of the BSS filter set by user.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:12 +0000 (13:13 -0800)]
staging: ath6kl: Fixing memory leak
The patch fixes a mismatch in the allocation and free of scatter HIF bus
requests in the suspend/resume path.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:11 +0000 (13:13 -0800)]
staging: ath6kl: Add configuration for excessive TX retry threshold
Adding host side interface to configure the excessive TX retry threshold.
It is used by the target to determine disconnection triggers. Additionally,
some definitions have been added to header file wmi.h to bridge the gap
for the newly added command.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:10 +0000 (13:13 -0800)]
staging: ath6kl: Fixing a memory leak
Fix for a memory leak discovered during suspend/resume testing.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:09 +0000 (13:13 -0800)]
staging: ath6kl: Fixing a memory leak
Virtual Scatter Gather Lists not getting freed during the HTCStop(). The
patch adds some clean up code in the code path.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:08 +0000 (13:13 -0800)]
staging: ath6kl: Adding support for txop bursting enable/disable
Adding compile time support for enabling/disabling txop bursting.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:07 +0000 (13:13 -0800)]
staging: ath6kl: Consolidating hardware configuration
Move all the wmi configuration commands done after wmi_ready to a single
function.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:06 +0000 (13:13 -0800)]
staging: ath6kl: Fixing driver initialization for manufacturing mode
Fixing the driver initialization for manufacturing mode that involves
downloading a firmware binary meant for RF tests on the factory floor.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:05 +0000 (13:13 -0800)]
staging: ath6kl: Fixing target crash due to mismatch connect/disconnect
Firmware design requires a WMI_DISCONNECT_CMD for every WMI_CONNECT_CMD to
clear the firmware previous profile state. There is one case in linux host
driver where two WMI_CONNECT_CMD are given without a WMI_DISCONNECT_CMD.
This causes firmware state to mismatch causing an ASSERT. Use the driver
state variable arConnectPending to track whether a WMI_CONNECT_CMD is
issued to firmware.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:04 +0000 (13:13 -0800)]
staging: ath6kl: Return correct scan complete status
Return correct scan complete status to the cfg80211 module based on
the value returned from the hardware.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:03 +0000 (13:13 -0800)]
staging: ath6kl: Fixing key settings for WPA/WPA2
A bug was observed during the reconnection phase in the WPA/WPA2-PSK scenario
where the EAPOL frames were going encrypted during an auto reconnection
attempt. The initial 4-way handshake would go fine but then the driver
was getting a command to set default keys sometime later. Setting of an
incorrect flag (TX_USAGE) in the hadrware was causing the EAPOL frames during
the subsequent 4-way handshake attempts to go encrypted causing the AP to
reject the station.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:02 +0000 (13:13 -0800)]
staging: ath6kl: Fixing a NULL pointer exception
The driver was dereferencing a NULL pointer because of the device instance
being registered via the set_wiphy_dev() function. The function
ar6000_avail_ev() was passing the argument as NULL instead of using the one
returned by the MMC stack through the probe callback.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jerome Marchand [Thu, 17 Feb 2011 16:11:49 +0000 (17:11 +0100)]
Staging: zram: initialize device on first read
Currently the device is initialized when first write is done to the
device. Any read attempt before the first write would fail, including
"hidden" read the user may not know about (as for example if he tries
to write a partial block).
This patch initializes the device on first request, whether read or
write.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasiliy Kulikov [Thu, 10 Feb 2011 18:00:39 +0000 (21:00 +0300)]
staging: zcache: fix memory leak
obj is not freed if __get_free_page() failed.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 14:20:02 +0000 (14:20 +0000)]
staging:iio:gyro:adis16130 stub removal and cleanup
Get rid of unused stubs for trigger and buffer support.
Fix line length issues.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 14:20:01 +0000 (14:20 +0000)]
staging:iio:gyro:adis16080 unused stub removal and cleanup
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 14:20:00 +0000 (14:20 +0000)]
staging:iio:gyro:adis16060 cleanup and dead code removal
Removed stubs related to buffering and triggering. Put them back
when they are actually needed.
Fixed line length issues.
Made a number of functions static as no longer in header.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 14:07:43 +0000 (14:07 +0000)]
staging:iio:meter remove stubs from ade7854.
General cleanup and use of standard functions to simplfy some spi reads
as well.
Also added a device id table to the spi version.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 14:07:42 +0000 (14:07 +0000)]
staging:iio:meter remove stubs from ade7759.
General cleanup and use of standard functions to simplfy some spi reads
as well.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 14:07:41 +0000 (14:07 +0000)]
staging:iio:meter remove stubs from ade7754.
General cleanup and use of standard functions to simplfy some spi reads
as well.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 14:07:40 +0000 (14:07 +0000)]
staging:iio:meter remove stubs from ade7753.
General cleanup and use of standard functions to simplfy some spi reads
as well.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 13:09:13 +0000 (13:09 +0000)]
staging:iio: buffer example - add lots more runtime parameters
Add ability to control delay for event free buffers
Add ability to control length of buffer
Add ability to control how many read cycles occur
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 13:09:12 +0000 (13:09 +0000)]
staging:iio: update example to handle case with no ring events
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 13:09:11 +0000 (13:09 +0000)]
staging:iio:lis3l02dq allow buffer implementation selection
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 13:09:10 +0000 (13:09 +0000)]
staging:iio:kfifo buffer implementation
A very simple use of a kfifo as an alternative for the ring_sw
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 13:09:09 +0000 (13:09 +0000)]
staging:iio:buffering move the copy to user on rip down into implementations
The current interface is not as adaptable as it should be. Moving
this complexity into the implementations makes it easier to add
new implementations.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tony SIM [Tue, 15 Feb 2011 10:10:27 +0000 (19:10 +0900)]
staging: iio: ak8975: add platform data.
As some of the platform not support irq_to_gpio, we pass gpio port
by platform data.
Signed-off-by: Tony SIM <chinyeow.sim.xt@renesas.com>
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brown [Tue, 15 Feb 2011 00:15:25 +0000 (16:15 -0800)]
staging: msm: Use explicit GPLv2 licenses
Replace a BSD-style license in Code Aurora Forum authored files with
an explicit GPLv2.
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Javier Martinez Canillas [Sat, 12 Feb 2011 03:38:25 +0000 (04:38 +0100)]
Staging: bcm: Bcmchar: Fix some checkpatch errors
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Javier Martinez Canillas [Sat, 12 Feb 2011 03:38:24 +0000 (04:38 +0100)]
Staging: bcm: Bcmchar: Fix style issues on bcm_char_read()
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Javier Martinez Canillas [Sat, 12 Feb 2011 03:38:23 +0000 (04:38 +0100)]
Staging: bcm: Bcmchar: Fix style issues on bcm_char_release()
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Javier Martinez Canillas [Sat, 12 Feb 2011 03:38:22 +0000 (04:38 +0100)]
Staging: bcm: Bcmchar: Fix style issues on bcm_char_open()
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hank Janssen [Fri, 18 Feb 2011 20:39:57 +0000 (12:39 -0800)]
Staging: hv: Fixed FIXME comments by using list_for_each_entry
Fixed FIXME requests in channel_mgmt.c by using
list_for_each_entry.
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: K.Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Haiyang Zhang [Mon, 14 Feb 2011 22:51:42 +0000 (14:51 -0800)]
staging: hv: Remove dead code from rndis_filter.c
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Haiyang Zhang [Mon, 14 Feb 2011 22:51:41 +0000 (14:51 -0800)]
staging: hv: Remove dead code from netvsc.c
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 11 Feb 2011 22:48:45 +0000 (14:48 -0800)]
Staging: hv: Cleanup vmalloc calls
The subject says it all. There is no need to
specify different page protection bits based
on the architecture.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 11 Feb 2011 18:00:12 +0000 (10:00 -0800)]
Staging: hv: Remove osd layer
The OSD layer was a wrapper around native interfaces
adding little value and was infact buggy -
refer to the osd_wait.patch for details.
This patch gets rid of the OSD abstraction.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 11 Feb 2011 17:59:43 +0000 (09:59 -0800)]
Staging: hv: Use native wait primitives
In preperation for getting rid of the osd layer; change
the code to use native wait interfaces. As part of this,
fixed the buggy implementation in the osd_wait_primitive
where the condition was cleared potentially after the
condition was signalled.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 11 Feb 2011 17:59:00 +0000 (09:59 -0800)]
Staging: hv: Use native page allocation/free functions
In preperation for getting rid of the osd.[ch] files;
change all page allocation/free functions to use native interfaces.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 15 Feb 2011 11:35:40 +0000 (12:35 +0100)]
staging: brcm80211: improved checks on incompatible firmware
The return status of wl_ucode_init_buf() is now being used. Also a bug in
firmware validation, which could lead to incompatible firmware not being
rejected by the driver, has been fixed. Comment from Dan Carpenter on using
negative error values has been incorporated in this commit.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 15 Feb 2011 10:13:51 +0000 (11:13 +0100)]
staging: brcm80211: bugfix for stack dump on firmware load problems
If there is a problem with the firmware load (eg, firmware not present in
/lib/firmware/brcm), then the driver would dump its stack instead of bailing
out gracefully. Root cause was an uninitialized variable (wl->pub) being
dereferenced in the rfkill portion of a cleanup routine (wl_remove). Fix was
to move the rfkill calls into the correct spot in wl_remove().
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 15 Feb 2011 10:13:50 +0000 (11:13 +0100)]
staging: brcm80211: bugfix for oops on firmware load problems
Upon firmware load failure, wl_release_fw() was called multiple
times. This caused the driver to oops. Solution was to remove redundant
wl_release_fw() calls.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stanislav Fomichev [Mon, 14 Feb 2011 22:05:10 +0000 (01:05 +0300)]
staging: brcm80211: replace bcopy with memcpy
Use native linux memcpy instead of legacy bcopy
Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stanislav Fomichev [Mon, 14 Feb 2011 22:05:09 +0000 (01:05 +0300)]
staging: brcm80211: use %zu instead of %d for size_t
Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Mon, 14 Feb 2011 11:16:47 +0000 (12:16 +0100)]
staging: brcm80211: removed unused code because of mac rev cleanup
Code cleanup. Removed more defines, data structures and functions that were
unused because this driver supports mac core rev 22 and up. Got rid of redundant
brackets in wlc_bmac_txstatus() by moving locally defined variables above {}
scope.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Mon, 14 Feb 2011 11:16:46 +0000 (12:16 +0100)]
staging: brcm80211: removed obsolete comments
Code cleanup. Only mac core revisions 22 and higher are supported, therefore
comment related to older mac revisions was removed.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Mon, 14 Feb 2011 11:16:45 +0000 (12:16 +0100)]
staging: brcm80211: removal of inactive d11 code
Code cleanup. Removed code that was never invoked because the mac core
revision supported is always higher than 22.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 14:27:46 +0000 (15:27 +0100)]
staging: brcm80211: remove declaration of unused string array
The constant array declaration aci_names is not referenced
anywhere in the code so it has been removed.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 14:27:45 +0000 (15:27 +0100)]
staging: brcm80211: remove #ifdef BCMDBG from regular functions
Under error condition debug functions are being called which
only have implementation when BCMDBG is defined. This result
in #ifdef BCMDBG blocks in functions. This patch fixes this by
mapping the debug functions to empty macro when BCMDBG is not
defined. This makes the calling function easier to read.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 14:27:44 +0000 (15:27 +0100)]
staging: brcm80211: remove warning introduced by rfkill implementation
During rfkill implementation the content of wlc_radio_upd function
was removed for testing purposes only. This ended up in the patch
sent out. This commit restores the function content, which was the
only function calling static function wlc_radio_enable. This removes
the compilation warning observed.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 11:03:52 +0000 (12:03 +0100)]
staging: brcm80211: remove unnecessary cast in wlc_d11hdrs_mac80211
memset prototype specifies a void pointer as buffer. Conversion from
any pointer type to void pointer does not require an explicit cast.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 11:03:51 +0000 (12:03 +0100)]
staging: brcm80211: store BSSID in driver config information
When mac80211 informs about new BSSID this was configured toward
the hardware device, but the information is also needed inside
the driver itself. This patch takes care of that.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 11:03:50 +0000 (12:03 +0100)]
staging: brcm80211: set beacon interval as provided by mac80211
Driver now follows beacon interval as set by mac80211 callback.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 11:03:49 +0000 (12:03 +0100)]
staging: brcm80211: store HT operation mode settings from mac80211
The HT operation mode is provided by mac80211 and they are now
stored in the driver.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 11:03:48 +0000 (12:03 +0100)]
staging: brcm80211: handle change in association state from mac80211
The driver has flags for association state which are now being set
according to notification from mac80211.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / profile / ivi / kernel-x86-ivi.git / log