Move stdbool.h

Move inclusion of stdbool.h to common header files, instead of including
in an ad-hoc manner.

Signed-off-by: Paul Brook <paul@codesourcery.com>

monitor/QMP: Drop info hpet / query-hpet

This command was of minimal use before, now it is useless as the hpet
become a qdev device and is thus easily discoverable. We should
definitely not set query-hpet in QMP's stone, and there is also no good
reason to keep it for the interactive monitor.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

hpet: Add MSI support

This implements the HPET capability of routing IRQs to the front-side
bus, aka MSI support. This feature can be enabled via the qdev property
"msi" and is off by default.

Note that switching it on can cause guests (at least Linux) to use the
HPET as timer instead of the LAPIC. KVM users should recall that only
the latter is currently available as fast in-kernel model.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

hpet: Make number of timers configurable

One HPET block supports up to 32 timers. Allow to instantiate more than
the recommended and implemented minimum of 3. The number is configured
via the qdev property "timers". It is also saved/restored so that it
need not match between migration peers.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

vmstate: Add VMSTATE_STRUCT_VARRAY_UINT8

Required for hpet.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

hpet: Add support for level-triggered interrupts

By implementing this feature we can also remove a nasty way to kill qemu
(by trying to enable level-triggered hpet interrupts).

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

hpet: Drop static state

Instead of keeping a static reference around, pass the state to
hpet_enabled and hpet_get_ticks. All callers now have it at hand. Will
once allow to instantiate the HPET more than a single time.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

hpet/rtc: Rework RTC IRQ replacement by HPET

Allow the intercept the RTC IRQ for the HPET legacy mode. Then push
routing to IRQ8 completely into the HPET. This allows to turn
hpet_in_legacy_mode() into a private function. Furthermore, this stops
the RTC from clearing IRQ8 even if the HPET is in control.

This patch comes with a side effect: The RTC timers will no longer be
stoppend when there is no IRQ consumer, possibly causing a minor
performance degration. But as the guest may want to redirect the RTC to
the SCI in that mode, it should normally disable unused IRQ source
anyway.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

hpet: Start/stop timer when HPET_TN_ENABLE is modified

We have to update the qemu timer when the per-timer enable bit is
toggled, just like for HPET_CFG_ENABLE changes.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

hpet: Convert to qdev

Register the HPET as a sysbus device and create it that way. As it can
route its IRQs to any ISA IRQ, we need to connect it to all 24 of them.
Once converted to qdev, we can move reset handler and vmstate
registration into its hands as well.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

hpet: Move static timer field initialization

Properly initialize HPETTimer::tn and HPETTimer::state once during
hpet_init instead of (re-)writing them on every reset.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

hpet: Silence warning on write to running main counter

Setting the main counter while the HPET is enabled may not be a good
idea of the guest, but it is supported and should, thus, not spam the
host console with warnings.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

hpet: Coding style cleanups and some refactorings

This moves the private HPET structures into the C module, simplifies
some helper functions and fixes most coding style issues (biggest chunk
was improper switch-case indention). No functional changes.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

hpet: Catch out-of-bounds timer access

Also prevent out-of-bounds write access to the timers but don't spam the
host console if it triggers.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

configure: Fix evaluation of config-host.mak in create_config

Only match on true dir variable assignments, avoid generating garbage
due to the "# Configured with: ..." line which may contain "*dir=" as
well.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

tcg-s390: correctly detect s390 with a 64-bit kernel

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

Compile OS specific files only once for all targets

OS specific files are not target dependent, so they can be compiled
once for all targets.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Move set_proc_name() to OS specific files.

Move handling to change process name to POSIX specific files
plus add a better error message to cover the case where the
feature isn't supported.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Move line-buffering setup to OS specific files.

Move line-buffering setup to OS specific files.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Make os_change_process_uid and os_change_root os-posix.c local

os_change_process_uid() and os_change_root() are now only called
from os-posix.c, so no need to keep win32 stubs for them.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Move daemonize handling to OS specific files

Move daemonize handling from vl.c to OS specific files. Provide dummy
stubs for Win32.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Move chroot handling to OS specific files.

Move chroot handling to OS specific files.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Move runas handling from vl.c to OS specific files.

Move code to handle runas, ie. change of user id of QEMU process
to OS specific files and provide dummy stub for Win32.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Introduce OS specific cmdline argument handling and move SMB arg to os-posix.c

Introduce OS specific cmdline argument handling by calling
os_parse_cmd_args() at the end of switch() statement. Move option
enum to qemu-options.h and have it included from os-posix.c and
os-win32.c in addition to vl.c.

In addition move SMB argument to os-posix.c

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Rename qemu-options.h to qemu-options.def

Rename qemu-options.h to qemu-options.def as it is not a header file
for general use and this leaves space for a proper qemu-options.h

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Move find_datadir to OS specific files.

This moves the win32 and POSIX versions of find_datadir() to OS
specific files, and removes some #ifdef clutter from vl.c

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Move main signal handler setup to os specificfiles.

Move main signal handler setup to os specific files.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Rename os_setup_signal_handling() to os_setup_early_signal_handling()

Rename os_setup_signal_handling() to os_setup_early_signal_handling()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Move win32 early signal handling setup to os_setup_signal_handling()

Move win32 early signal handling setup to os_setup_signal_handling()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Introduce os-posix.c and create os_setup_signal_handling()

Introcuce os-posix.c and move posix specific signal handling
there.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

vl.c: Move host_main_loop_wait() to OS specific files.

Move host_main_loop_wait() to OS specific files. Create
qemu-os-posix.h and provide empty inline for the POSIX case.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Introduce os-win32.c and move polling functions from vl.c

This introduces os-win32.c. It is meant to carry win32 specific
functions thata are not relevant for all of QEMU as well as win32
versions of various pieces like signal handling etc.

Move win32 polling handler helper functions from vl.c to os-win32.c

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Create qemu-os-win32.h and move WIN32 specific declarations there

Create qemu-os-win32.h for WIN32 specific declarations. Move polling
handling declaration into this file from sysemu.h

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

vl.c: Remove double include of netinet/in.h for Solaris

vl.c: netinet/in.h is already included once above for the

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Andreas Faerber <afaerber@opensolaris.org>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

NEON vldN optimization

When combining multiple values as part of a NEON array load, do explcit
shift/or rather than using gen_bfi.  This voids redundant mask
operations.

Signed-off-by: Paul Brook <paul@codesourcery.com>

tcg: fix DEF macro after commit c61aaf7a388c4ad95d8b546fdb9267dc01183317

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

tcg-s390: Adjust compilation flags.

Force -m31/-m64 based on s390/s390x target.

Force -march=z990.  The TCG backend will always require the
long-displacement facility, so the compiler may as well make
use of that as well.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

tcg-s390: Compute is_write in cpu_signal_handler.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

s390x: Don't use a linker script for user-only.

The default placement of the application at 0x80000000 is fine,
and will avoid the default placement for most other guests.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

s390x: Avoid _llseek.

There's no _llseek on s390x either.  Replace the existing
test for __x86_64__ with a functional test for __NR_llseek.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

tcg-s390: Allocate the code_gen_buffer near the main program.

This allows the use of direct calls to the helpers,
and a direct branch back to the epilogue.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

tcg-s390: Icache flush is a no-op.

Before gcc 4.2, __builtin___clear_cache doesn't exist, and
afterward the gcc s390 backend implements it as nothing.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

tcg-i386: fix andi r, r, 0xff

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

tcg-i386: remove use of _Bool that slipped code review

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

esp: lower IRQ on soft reset

42f1ced228c9b616cfa2b69846025271618e4ef5 removed irq lowering
during reset. However, for chip reset command and DMA reset signal,
its actually the correct thing to do.

Lower IRQ on soft reset only.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

qbus: fix memory leak in qbus_free()

BusState::name is allocated in qbus_create_inplace().
So it should be freed by qbus_free().

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

multiboot: compilation fix with DEBUG_MULTIBOOT enabled.

This patch fixes the following compilation errors in multiboot.c
when DEBUG_MULTIBOOT is defined.
Use TARGET_FMT_plx instead of %x for target_phys_addr_t.

  CC    i386-softmmu/multiboot.o
cc1: warnings being treated as errors
qemu/hw/multiboot.c: In function 'mb_add_mod':
qemu/hw/multiboot.c:121: error: format '%08x' expects type 'unsigned int', but argument 4 has type 'target_phys_addr_t'
qemu/hw/multiboot.c:121: error: format '%08x' expects type 'unsigned int', but argument 5 has type 'target_phys_addr_t'
qemu/hw/multiboot.c: In function 'load_multiboot':
qemu/hw/multiboot.c:279: error: format '%#x' expects type 'unsigned int', but argument 5 has type 'target_phys_addr_t'
qemu/hw/multiboot.c:307: error: format '%x' expects type 'unsigned int', but argument 3 has type 'target_phys_addr_t'
qemu/hw/multiboot.c:308: error: format '%x' expects type 'unsigned int', but argument 3 has type 'target_phys_addr_t'
make[1]: *** [multiboot.o] Error 1

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

vga-isa-mm: remove one #ifdef CONFIG_BOCHS_VBE.

remove one #ifdef CONFIG_BOCHS_VBE.
Call vga_init_vbe() instead.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

main: allocate gui_timer only once.

fix memory leak.
there is no need to allocate more than one gui_timer.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Merge remote branch 'mst/for_anthony' into staging

cris: Break out image loading to hw/cris-boot.c.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@axis.com>

s390: Disassemble some general-instruction-extension insns.

The full general-instruction-extension facility was added to binutils
after the change to GPLv3.  This is not the entire extension, just
what we're using in TCG.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

s390: Update disassembler to the last GPLv2 from binutils.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

tcg-i386: Merge 64-bit generation.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

configure: display sysconfdir in summary

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

move computation of tools and roms outside of config-host.mak generation

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

configure: move directory defaults earlier

Unify with existing special-purpose configure code for win32.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

configure: ignore unknown --xyzdir options

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

configure: introduce more --xyzdir options

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

configure: expand ${prefix} in create_config

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

configure: move all directory entries in config-host.mak close

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

configure: unify handling of xyzdir variables

Making an xyzdir variable for each directory prepares for the next
patches introducing config-host.h defines and configure options for them.
It also fixes the problem where overriding prefix at "make install"
time did not override it for sysconfdir.

Removes some of the differences between sysconfdir and other variables,
the rest will go away later.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

rename CONFIG_QEMU_PREFIX

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

configure: introduce confdir and confsuffix

confsuffix was write-only, flesh it out.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

configure: introduce sysconfsuffix

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

configure: delete duplicate create_config case stanza

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

configure: dyngen is long time gone

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

configure: avoid using expr

Just a personal preference against duplicating hieroglyphics.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

configure: bail out early on invalid -cpu option

It would fail later anyway.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

configure: remove some bashisms

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

target-mips: Fix compilation

TCGv t1 needs tcg_temp_free instead of tcg_temp_free_i32.

Cc: Nathan Froyd <froydnj@codesourcery.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

hw: honor low bit in mipssim machine

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

linux-user: honor low bit of entry PC for MIPS

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

target-mips: add microMIPS exception handler support

Unlike MIPS16, microMIPS lets you choose the ISA mode for your exception
handlers.  The ISA mode is selectable via a user-writable CP0.Config3
flag.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

target-mips: microMIPS ASE support

Add instruction decoding for the microMIPS ASE.  All we do is decode and
then forward to the existing gen_* routines.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

target-mips: mips16 cleanups

Change code handling mips16-specific branches to use ISA-neutral special
opcodes.  Since there are several places where the delay slot
requirements for microMIPS branches differ from mips16 branches, using
opcodes is easier than checking hflags, then checking mips16
vs. microMIPS.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

target-mips: refactor c{, abs}.cond.fmt insns

Move all knowledge about coprocessor-checking and register numbering
into the gen_cmp* helper functions.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

target-mips: move FP FMT comments closer to the definitions

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

target-mips: define constants for magic numbers

Add FMT_* constants for the floating-point format field in opcodes and
tweak a few places to use them.  Add enums for various invocations of
FOP and tweak gen_farith and its lone caller accordingly.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

tcg: get rid of DEF2 in tcg-opc.h

Now that tcg-opc.h is only used in TCG code, get rid of DEF2 in
tcg-opc.h.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

tcg: get rid of copy_size in TCGOpDef

copy_size is a left-over from the dyngen era, remove it.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

Fix multiboot compilation

Commit dd4239d6574ca41c94fc0d0f77ddc728510ffc57 broke multiboot. It replaced the
instruction "rep insb (%dx), %es:(%edi)" by the binary output of
"addr32 rep insb (%dx), %es:(%di)".

Linuxboot calls the respective helper function in a code16 section. So the
original instruction was automatically translated to its "addr32" equivalent.
For multiboot, we're running in code32 so gcc didn't add the "addr32" which
breaks the instruction.

This patch splits that helper function in one which uses addr32 and one which
does not, so everyone's happy.

The good news is that nobody probably cared so far. The bundled multiboot.bin
binary was built before the change and is thus correct.

Please also put this patch into -stable.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

net: Fix hotplug with pci_add

The correct model type wasn't getting added when hotplugging nics with
pci_add.

Testcase: start VM with default nic type. In the qemu_monitor:

(qemu) pci_add auto nic model=virtio

This results in a nic hot-plug of the same nic type as the default.

This was broken in 5294e2c774f120e10b44652ac143abda356f44eb

Also changes the behaviour where no .init is defined for a
net_client_type. Previously, 0 was returned, which indicated the init
was successful and that 0 was the index into the nd_tables[] array.
Return -1, indicating unsuccessful init, in such a case.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tcg: Make some tcg-target.c routines static.

Both tcg_target_init and tcg_target_qemu_prologue
are unused outside of tcg.c.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

tcg: Add TYPE parameter to tcg_out_mov.

Mirror tcg_out_movi in having a TYPE parameter.  This allows x86_64
to perform the move at the proper width, which may elide a REX prefix.

Introduce a TCG_TYPE_REG enumerator to represent the "native width"
of the host register, and to distinguish the usage from "pointer data"
as represented by the existing TCG_TYPE_PTR.

Update all targets to match.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

target-mips: break out [ls][wd]c1 and rdhwr insn generation

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

Fix --enable-user-pie compilation.

We forgot to propagate -fpie to the libdis-user directory.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

virtio-net: truncating packet

virtio net attempts to peek into virtio queue to
determine that we have enough space for the complete
packet to fit. However, it fails to account for space
consumed by virtio net header when it does this,
under stress this results in a failure
with the message 'truncating packet'.

redhat bz 591494.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

microblaze: Make MSR_UM and MSR_VM part of the tb flags

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>

petlogix-3adsp: Tweak displacement of cmdline and fdt blob.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>

migration-exec: fix OpenBSD build warning

Add include directives to get WIFEXITED() and WEXITSTATUS() macros defined.

Fixes warnings:
  CC    migration-exec.o
/src/qemu/migration-exec.c: In function `exec_close':
/src/qemu/migration-exec.c:53: warning: implicit declaration of function `WIFEXITED'
/src/qemu/migration-exec.c:54: warning: implicit declaration of function `WEXITSTATUS'

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

target-i386: fix decoding of negative 4-byte displacements

Negative four byte displacements need to be sign-extended after
c086b783eb7a578993d6d2ab62c4c2666800b63d.  Do so.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Merge remote branch 'kwolf/for-anthony' into staging

migration: respect exit status with exec:

This patch makes sure that if the exec: process exits with a non-zero return
status, we treat the migration as failed.

This fixes https://bugs.launchpad.net/qemu/+bug/391879

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

tcg-i386: fix a typo

Fix a typo introduced by c28b14c694d759f39fe3ae4f8d03b567da5b93f8.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

tcg-i386: declare tcg_out_tlb_load() inline

Declare tcg_out_tlb_load() inline so that we don't loose optimisations
with commit 8516a04467cb7954cdc32e8b79b4b7df56dccb16.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

tcg-i386: Remove some ifdefs in qemu_ld/st.

Tidy some code by replacing ifdefs by C ifs.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

tcg-i386: Split out tlb load function.

Share some code between qemu_ld and qemu_st.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

tcg-i386: Swap order of TLB hit and miss paths.

Make fallthru be TLB hit and branch be TLB miss.  Doing this
both improves branch prediction and will allow further cleanup.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

tcg-i386: Split out TLB Hit path from qemu_ld/st.

Splitting out these functions will allow further cleanups.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>