Jianlong Huang [Thu, 3 Nov 2022 10:13:30 +0000 (18:13 +0800)]
configs:Sync configs of jh7110
+CONFIG_PM_DEBUG=y
+CONFIG_PM_ADVANCED_DEBUG=y
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
keith.zhao [Mon, 31 Oct 2022 09:51:53 +0000 (17:51 +0800)]
riscv:linux:vout:mipi
mipi dsi driver add 800*1280 panel : update panel driver code
Signed-off-by: keith <keith.zhao@starfivetech.com>
keith.zhao [Mon, 31 Oct 2022 09:50:48 +0000 (17:50 +0800)]
riscv:linux:vout:mipi
mipi dsi driver add 800*1280 panel: update dts and config
Signed-off-by: keith <keith.zhao@starfivetech.com>
Jianlong Huang [Mon, 31 Oct 2022 01:47:30 +0000 (09:47 +0800)]
configs:starfive:Default CPUFREQ governor ondemand
Change Default CPUFREQ governor to ondemand.
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 31 Oct 2022 01:31:44 +0000 (09:31 +0800)]
regulator:axp1506:Remove regulator ALDO4
Fix bug, remove sdio_vdd and remove ALDO4 enum.
Which may cause cpu freq don't work.
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Sat, 29 Oct 2022 13:16:07 +0000 (21:16 +0800)]
dts:starfive:Disable spi
System crash when booting due to pl022_runtime_suspend.
Next version will fix it.
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Sat, 29 Oct 2022 06:45:27 +0000 (14:45 +0800)]
configs: enable CPU_FREQ
enable cpu freq function
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Samin Guo [Fri, 21 Oct 2022 09:28:39 +0000 (17:28 +0800)]
net:stmmac:dwc-qos: add support for external rmii_rtx clocks
JH7110A use external rmii_rtx clk for tx clk on 100M/10M mode.
Signed-off-by: Samin Guo <samin.guo@linux.starfivetech.com>
Jianlong Huang [Thu, 20 Oct 2022 01:23:51 +0000 (09:23 +0800)]
regulator:axp15060:Remove sdio vdd regulator
Visionfive2 emmc is default 1.8V, there is no need to controll the voltage.
Remove sdio_vdd node and code.
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Tue, 18 Oct 2022 03:31:28 +0000 (11:31 +0800)]
configfs: Enable SND_SOC_STARFIVE_I2S
Support hdmi audio
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 17 Oct 2022 14:15:24 +0000 (22:15 +0800)]
arch:dts:starfive:Enable i2stx_4ch0 node
Add mclk_ext pin and enable i2stx_4ch0
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 17 Oct 2022 13:45:03 +0000 (21:45 +0800)]
riscv:dts:jh7110: Modify CMA reserved space to better support 2G DRAM
When the DDR is 2G (0x40000000-0xc0000000), it may cause address usage
problems.
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Samin Guo [Mon, 17 Oct 2022 10:59:39 +0000 (18:59 +0800)]
riscv:starfive:jh7110: change gmac0 tx delay to 0xa
0xa will better match gmac0 tx in 1000M
Signed-off-by: Samin Guo <samin.guo@linux.starfivetech.com>
Samin Guo [Wed, 12 Oct 2022 05:05:44 +0000 (13:05 +0800)]
dts:starfive:jh7110: set gmac phy tx_inverted for JH7110B+YT8531PHY.
JH7110B requires tx_inverted_10/100/1000 configuration, and different parameters
may be required in 10M/100M/1000M mode.
This parameter supports JH7110B+YT8531PHY by default. Other boards can
modify the parameters of the tx_inverted_10/100/1000 to obtain support.
Signed-off-by: Samin Guo <samin.guo@linux.starfivetech.com>
Jianlong Huang [Wed, 12 Oct 2022 02:00:10 +0000 (10:00 +0800)]
dts: starfive: Add A11 dts for vf2 version 1.1 board
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Tue, 27 Sep 2022 02:50:28 +0000 (10:50 +0800)]
dts: starfive: Enable gpio restart
Add gpio restart dts node
Enable gpio restart config
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Sat, 24 Sep 2022 00:46:23 +0000 (08:46 +0800)]
dts: starfive: Enable usb device node
Sync jh7110 usb device node and enable
Sync jh7110 imx219 compatible name
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Sat, 24 Sep 2022 00:45:26 +0000 (08:45 +0800)]
configs: visionfive2: Enable usb device config
Sync jh7110 usb device config
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 19 Sep 2022 09:44:30 +0000 (17:44 +0800)]
config: Add led config
Enable led trigger heartbeat
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 19 Sep 2022 09:43:13 +0000 (17:43 +0800)]
dts: starfive: Add led node
Add led node on dts file
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 19 Sep 2022 06:54:44 +0000 (14:54 +0800)]
dts: starfive: Move wm8960 and ac108 node under i2c form dtsi file to wm8960/ac108 file
The default dts do not contain wm8960/ac108, move to the other file.
The booting of default dts do not have wrong log about wm8960/ac108
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 19 Sep 2022 00:50:08 +0000 (08:50 +0800)]
dts: starfive: Replace stf to starfive
Forget to replace stf to starfive on dtbo file
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Thu, 15 Sep 2022 00:56:06 +0000 (08:56 +0800)]
dts: starfive: enhance SD card io Output Drive Strength
SD card gpio is generic gpio on visionfive2, the default output drive strength may be not enough, some sd card do not work.
So enhance the gpio output drive strength to max.
But on visionfive2, the sd card gpio is fixed 3.3V, there is no need to switch_voltage and not support uhs mode.
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Thu, 15 Sep 2022 00:47:20 +0000 (08:47 +0800)]
dts: starfive: Replace sf to starfive
Because upstream requirement.
Replace sf to starfive.
Replace hdmi_output to rgb_output.
Replace encoder to dsi_output
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Thu, 1 Sep 2022 07:22:36 +0000 (15:22 +0800)]
dts: starfive: Add wm8960 and ac108 dts
Add wm8960 and ac108 dts base default dts
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 29 Aug 2022 00:57:59 +0000 (08:57 +0800)]
configs: starfive: sync jh7110 config to visionfive2
sync jh7110 config to visionfive2 about audio config
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
mason.huo [Tue, 23 Aug 2022 03:44:09 +0000 (11:44 +0800)]
riscv: dts: Change the cpu_vdd_0p9 to cpu_vdd
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
jianlonghuang [Tue, 23 Aug 2022 01:13:07 +0000 (09:13 +0800)]
dts: starfive: Add ac108 dts config
Add ac108 dts
Signed-off-by: jianlonghuang <jianlong.huang@starfivetech.com>
Jianlong Huang [Wed, 17 Aug 2022 05:57:35 +0000 (13:57 +0800)]
dts: starfive: update vf2 dts base on new board A1.1
reserve vf2 old board A1.0 dts as jh7110-visionfive-v2-A10.dts
new board A1.1 dts as default, jh7110-visionfive-v2.dts
vf2 dts common as jh7110-visionfive-v2.dtsi
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Fri, 19 Aug 2022 02:58:36 +0000 (10:58 +0800)]
dts: starfive: Add ac108 dts config
Add ac108 dts and config
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Fri, 19 Aug 2022 02:22:44 +0000 (10:22 +0800)]
Revert "v4l2: imx219 use pinctrl"
This patch just for evb
This reverts commit
8d7c702d7bc0fef9ee5882db660390801bbccaa7.
Jianlong Huang [Wed, 27 Jul 2022 10:02:18 +0000 (18:02 +0800)]
dts: starfive: sync evb dts and config
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
yanhong.wang [Mon, 25 Jul 2022 06:45:36 +0000 (14:45 +0800)]
riscv: configs: jh7110: Enable StarFive dwmac
Enable StarFive dwmac.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
Jianlong Huang [Mon, 25 Jul 2022 05:10:52 +0000 (13:10 +0800)]
dts: starfive: modify sdio0 config
set hs400es mode to promote read and write speed
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Kevin.xie [Fri, 22 Jul 2022 02:51:00 +0000 (10:51 +0800)]
dts: starfive: Modified PCIe pin setting for bring up PCIe USB hub.
Based on VisionFive V2 SCH.
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
Jianlong Huang [Thu, 14 Jul 2022 09:39:19 +0000 (17:39 +0800)]
dts: starfive: Add overlay dts
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Kevin.xie [Thu, 14 Jul 2022 07:31:59 +0000 (15:31 +0800)]
riscv: configs: Fix the pmic config from jh7110 to visionfive2
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
shengyang.chen [Thu, 14 Jul 2022 03:47:22 +0000 (11:47 +0800)]
riscv:linux:drm:mipidsi
update dphy reg config for visionfive2 board
Signed-off-by:shengyang.chen<shengyang.chen@starfivetech.com>
changhuang.liang [Wed, 13 Jul 2022 07:50:24 +0000 (15:50 +0800)]
v4l2: add imx219 support
dts: add imx219 configure
Signed-off-by: changhuang.liang <changhuang.liang@starfivetech.com>
Jianlong Huang [Tue, 12 Jul 2022 05:57:38 +0000 (13:57 +0800)]
riscv:dts:starfive-visionfive2: Add ethernet-phy node to set delay_chain
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Kevin.xie [Tue, 12 Jul 2022 03:10:52 +0000 (11:10 +0800)]
arch: riscv: Add dts & defconfig for axp15060 pmic driver
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
Jianlong Huang [Tue, 12 Jul 2022 00:21:51 +0000 (08:21 +0800)]
dts: starfive: Add pwmdac and wm8960 config
configs : starfive: sync JH7110_515_SDK_v1.0.0-rc2 config
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Fri, 1 Jul 2022 10:35:58 +0000 (18:35 +0800)]
configs: starfive: Add at24 config and device
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Thu, 30 Jun 2022 10:40:19 +0000 (18:40 +0800)]
dts: starfive: Support visionfive2
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Tue, 7 Jun 2022 01:12:51 +0000 (09:12 +0800)]
net: phy: motorcomm: Support the YT8531 gigabit PHY
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
andy.hu [Wed, 2 Nov 2022 09:52:16 +0000 (09:52 +0000)]
Merge branch 'CR_2517_sec_jiajie.ho' into 'jh7110-5.15.y-devel'
CR_2517_515:crypto:starfive: Fix "Unbalanced pm_runtime_enable!" warning
See merge request sdk/linux!583
andy.hu [Wed, 2 Nov 2022 09:45:57 +0000 (09:45 +0000)]
Merge branch 'CR_2522_ECO_EVB_515_samin.guo' into 'jh7110-5.15.y-devel'
CR_2522:support gmac with jh7110B-evb
See merge request sdk/linux!585
andy.hu [Wed, 2 Nov 2022 09:40:20 +0000 (09:40 +0000)]
Merge branch 'CR_2395_I2C_hal.feng' into 'jh7110-5.15.y-devel'
CR_2395_I2C_hal.feng
See merge request sdk/linux!581
andy.hu [Wed, 2 Nov 2022 09:37:53 +0000 (09:37 +0000)]
Merge branch 'CR_2498_spi_without_dma_devel_5.15_ziv.xu' into 'jh7110-5.15.y-devel'
CR 2498 spi without dma devel 5.15 ziv.xu
See merge request sdk/linux!582
Samin Guo [Tue, 1 Nov 2022 12:09:36 +0000 (20:09 +0800)]
dts:satrfive:jh7110: default support jh7110A gmac0
default support jh7110A gmac0
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Samin Guo [Tue, 1 Nov 2022 12:04:52 +0000 (20:04 +0800)]
net:phy:motorcomm: support yt8521 inverted
jh7110B need yt8521 inverted.
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Samin Guo [Tue, 1 Nov 2022 11:03:46 +0000 (19:03 +0800)]
net:phy:motorcomm: support modifying RGMII_TX_CLK delay train from dts
support use original or inverted RGMII_TX_CLK delay train.
10M/100M/1000M can be configured independently.
tx_inverted_xx = val;
for example:
&gmac0 {
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@0 {
tx_inverted_10 = <0>;
tx_inverted_100 = <1>;
tx_inverted_1000 = <1>;
};
};
0: original (default)
1: inverted
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Jia Jie Ho [Tue, 1 Nov 2022 06:40:42 +0000 (14:40 +0800)]
CR_2517:crypto:starfive: Fix "Unbalanced pm_runtime_enable!" warning
Crypto driver will probe multiple times waiting for
DMA to be ready, each time calling pm_runtime_enable().
Only call pm_runtime_enable() when it's not already enabled.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
ziv.xu [Tue, 1 Nov 2022 06:12:21 +0000 (14:12 +0800)]
spi-pl022-starfive.c: make spi work without dma
make spi work without dma
Signed-off-by: ziv.xu <ziv.xu@starfive.com>
Hal Feng [Mon, 31 Oct 2022 05:52:18 +0000 (13:52 +0800)]
clk: starfive: Keep the clock apb0 enabled always
This solves crush problem of i2c runtime pm and
prevents some aon modules from working abnormally.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Hal Feng [Mon, 31 Oct 2022 05:46:12 +0000 (13:46 +0800)]
Revert "i2c: designware: Descend startup priority"
This reverts commit
ef0fec210073c298598ab9a27e362e002dc0bf0b.
Then we keep the clock apb0 enabled always to fix crush
problem of i2c runtime pm.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
andy.hu [Fri, 28 Oct 2022 03:39:02 +0000 (03:39 +0000)]
Merge branch 'CR_2412_515_Clocktree_PLL1_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR_2412_515_Clocktree_PLL1_Xingyu.Wu
See merge request sdk/linux!553
andy.hu [Fri, 28 Oct 2022 03:38:26 +0000 (03:38 +0000)]
Merge branch 'CR_2440_515_Clocktree_1.5G_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR_2440_515_Clocktree_1.5G_Xingyu.Wu
See merge request sdk/linux!564
andy.hu [Fri, 28 Oct 2022 03:36:22 +0000 (03:36 +0000)]
Merge branch 'CR_2439_CPUFREQ_515_mason.huo' into 'jh7110-5.15.y-devel'
Cr 2439 cpufreq 515 mason.huo
See merge request sdk/linux!562
andy.hu [Fri, 28 Oct 2022 03:35:46 +0000 (03:35 +0000)]
Merge branch 'CR_2417_CPUIdle_515_mason.huo' into 'jh7110-5.15.y-devel'
Cr 2417 cpu idle 515 mason.huo
See merge request sdk/linux!559
andy.hu [Fri, 28 Oct 2022 03:27:46 +0000 (03:27 +0000)]
Merge branch 'CR_2462_DEV_PM_mason.huo' into 'jh7110-5.15.y-devel'
CR_2462 Port runtime PM from hibernation to devel
See merge request sdk/linux!574
mason.huo [Fri, 29 Jul 2022 07:17:55 +0000 (15:17 +0800)]
regulator: axp15060: Change the cpu_vdd_0p9 to cpu_vdd
Rename the cpu_vdd_0p9 regulator to cpu_vdd,
since the regulator may changed per cpu frequency.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
Kevin.xie [Tue, 12 Jul 2022 01:57:05 +0000 (09:57 +0800)]
driver: regulator: Add axp15060 pmic regulator driver
Add support for the axp15060 pmic.
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
mason.huo [Wed, 26 Oct 2022 03:47:45 +0000 (11:47 +0800)]
cpufreq: starfive: Remove unuse clocks
The jh7110 pll0 is fixed for cpufreq,
so we should change the cpu_core clock directly.
Remove the pll0 & osc clock.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
mason.huo [Wed, 26 Oct 2022 03:43:20 +0000 (11:43 +0800)]
riscv: defconfigs: Enable cpufreq for jh7110
Set the default cpufreq govenor to ondemand.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
mason.huo [Mon, 24 Oct 2022 08:51:24 +0000 (16:51 +0800)]
riscv: dts: starfive: Remove unsupported cpu frequencies
As the pll0 is fixed, there are only four cpu frequencies
that can be divided from the pll0, so remove the other
cpu frequencies.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
Xingyu Wu [Thu, 27 Oct 2022 09:39:22 +0000 (17:39 +0800)]
sound:dwc:i2s:Add hibernation about i2srx-3ch
Add runtime pm and system pm in i2srx-3ch driver.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Thu, 27 Oct 2022 08:06:02 +0000 (16:06 +0800)]
sound:dwc:i2s:Add hibernation about i2stx-4ch1
Add runtime pm and system pm in i2stx-4ch1 driver.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
mason.huo [Thu, 27 Oct 2022 07:25:21 +0000 (15:25 +0800)]
riscv: deconfig: Enable pm advanced debug
Enable pm advanced debug, so that we can
check runtime PM status.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
Xingyu Wu [Fri, 21 Oct 2022 01:56:24 +0000 (09:56 +0800)]
sound:starfive:pwmdac:Add runtime pm operation
Add runtime pm operation in PWMDAC driver.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
ziv.xu [Thu, 27 Oct 2022 02:55:00 +0000 (10:55 +0800)]
rtc:starfive: add pm ops for rtc
add pm ops for rtc
Signed-off-by: ziv.xu <ziv.xu@starfive.com>
Hal Feng [Wed, 26 Oct 2022 13:13:09 +0000 (21:13 +0800)]
i2c: designware: Descend startup priority
So i2c will be initialized after uart.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Hal Feng [Tue, 25 Oct 2022 12:18:39 +0000 (20:18 +0800)]
i2c: designware: Uncomment and recover the pm functions
Uncomment the system pm and runtime pm ops functions. Restore
the Synopsys DesignWare i2c driver to the original version.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Walker Chen [Thu, 27 Oct 2022 03:50:06 +0000 (11:50 +0800)]
CR_2345_Audio_DevicePM_walker.chen
Fix the bug that pdm function name spell error.
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Walker Chen [Wed, 26 Oct 2022 11:19:12 +0000 (19:19 +0800)]
CR_2345_Audio_DevicePM_walker.chen
Disable clock when audio driver is loaded.
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
shanlong.li [Wed, 26 Oct 2022 09:44:58 +0000 (02:44 -0700)]
driver:gpu: add gpu runtime pm
fix up system pm error and add runtime pm
Signed-off-by: shanlong.li <shanlong.li@starfivetech.com>
Xingyu Wu [Wed, 26 Oct 2022 09:38:41 +0000 (17:38 +0800)]
sound:starfive:Add hibernation in I2S
Add hibernation in starfive I2S driver.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
ziv.xu [Wed, 26 Oct 2022 06:14:04 +0000 (14:14 +0800)]
rtc-starfive.c:add system pm for rtc
add system pm for rtc
Signed-off-by: ziv.xu <ziv.xu@starfive.com>
ys [Wed, 26 Oct 2022 06:18:49 +0000 (23:18 -0700)]
drive:mailbox:add pm ops
add runtime pm and system pm ops
Signed-off-by: ys <eason.xiong@starfivetech.com>
William Qiu [Tue, 25 Oct 2022 07:00:23 +0000 (15:00 +0800)]
sec:starfive:add sec runtime PM ops
add sec runtime PM ops.
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
William Qiu [Tue, 25 Oct 2022 02:39:46 +0000 (10:39 +0800)]
SDIO:starfive:modify SDIO/EMMC runtime PM callback function
modify SDIO/EMMC runtime PM callback function.
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
William Qiu [Tue, 25 Oct 2022 02:36:38 +0000 (10:36 +0800)]
canfd:ipms:modify runtime PM callback funciton
modify runtime PM callback function.
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Xingyu Wu [Fri, 30 Sep 2022 07:26:59 +0000 (15:26 +0800)]
clk:starfive:isp:Add runtime and system pm control
Add runtime and system pm in isp clock tree driver.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Hal Feng [Fri, 21 Oct 2022 06:38:17 +0000 (14:38 +0800)]
pwm: starfive: Remove macro UNIVERSAL_DEV_PM_OPS
Because it causes error when system pm.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
ziv.xu [Fri, 21 Oct 2022 06:36:51 +0000 (14:36 +0800)]
drivers: temp sensor: reset execute permissions
reset execute permissions for FILE: drivers/hwmon/sfctemp.c
Signed-off-by: ziv.xu <ziv.xu@starfive.com>
ziv.xu [Fri, 21 Oct 2022 03:43:22 +0000 (11:43 +0800)]
add devcie pm for temp sensor
add device pm for temp sensor
Signed-off-by: ziv.xu <ziv.xu@starfive.com>
Ziv.Xu [Sat, 8 Oct 2022 07:17:46 +0000 (15:17 +0800)]
add device pm for trng
add device pm for trng
Signed-off-by: Ziv.Xu <Ziv.Xu@starfivetech.com>
Ziv.Xu [Mon, 10 Oct 2022 06:58:15 +0000 (14:58 +0800)]
add device pm for spi
add device pm for spi
Signed-off-by: Ziv.Xu <Ziv.Xu@starfivetech.com>
William Qiu [Fri, 21 Oct 2022 03:46:05 +0000 (11:46 +0800)]
SDIO:starfive:add SDIO/EMMC runtime pm ops
add SDIO/EMMC runtime pm ops.
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
William Qiu [Fri, 21 Oct 2022 02:13:13 +0000 (10:13 +0800)]
canfd:ipms:add canfd runtime PM ops
add canfd runtime PM ops.
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Xingyu Wu [Thu, 20 Oct 2022 07:44:59 +0000 (15:44 +0800)]
sound:starfive:spdif:Add hibernation operation
Add runtime pm and system pm in spdif driver.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Hal Feng [Wed, 19 Oct 2022 12:10:56 +0000 (20:10 +0800)]
pwm: starfive: Add pm handling (system/runtime pm ops)
Add system/runtime pm ops functions and enable runtime pm.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Jianlong Huang [Wed, 19 Oct 2022 10:00:02 +0000 (18:00 +0800)]
pinctrl:starfive: Add system pm interface
Support system pm fuction when suspend and resume.
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Walker Chen [Fri, 14 Oct 2022 07:43:20 +0000 (15:43 +0800)]
CR_2345_Audio_DevicePM_walker.chen
Implement Runtime PM and System PM for PDM and TDM module.
Signed-off-by: Walker Chen <walker.chen@linux.starfivetech.com>
Ziv.Xu [Thu, 13 Oct 2022 09:09:05 +0000 (17:09 +0800)]
add system pm for watchdog
add system pm for watchdog
Signed-off-by: Ziv.Xu <Ziv.Xu@starfivetech.com>
Ziv.Xu [Sat, 8 Oct 2022 07:02:15 +0000 (15:02 +0800)]
add runtime pm for watchdog
add runtime pm for watchdog
Signed-off-by: Ziv.Xu <Ziv.Xu@starfivetech.com>
minda.chen [Sat, 8 Oct 2022 11:07:06 +0000 (19:07 +0800)]
usb: cdns: add pm and runtume pm ops
add starfive pm supend/resume and runtime pm runtime
suspend and resume ops
Signed-off-by: minda.chen <minda.chen@starfivetech.com>
Kevin.xie [Thu, 13 Oct 2022 03:29:30 +0000 (11:29 +0800)]
drivers: pci: Support system pm no irq ops.
Because of the limitation of hardware design, only enable/disable clk here.
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
Kevin.xie [Thu, 13 Oct 2022 02:53:59 +0000 (10:53 +0800)]
drivers: pci: Support runtime pm & release when found empty slot in probe.
Used PLDA link up/down status in probe to indicate the slot situations.
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
changhuang.liang [Wed, 19 Oct 2022 06:14:37 +0000 (14:14 +0800)]
media: starfive: Remove hardware operations in vin init
Remove hardware operations in vin init, hardware operation need turn on
power domain.
Signed-off-by: changhuang.liang <changhuang.liang@starfivetech.com>