iio: adc: stm32-dfsdm: add check on max filter id

reg property should be checked against number of available filters.
BTW, dfsdm->num_fls wasn't used. But it can be used for this purpose.
This prevents using data out of allocated dfsdm->fl_list array.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: stm32-dfsdm: misc style improvements and fixes

Misc fixes & style improvements:
- checkpatch warns about line over 80 characters.
- remove extra spaces and a blank line (e.g. checkpatch --strict)
- remove bad error message always printed in probe routine.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: ad2s1200: Add blank lines

Add blank lines to improve readability.

Signed-off-by: David Veenstra <davidjulianveenstra@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: ad2s1200: Reverse Christmas tree ordering

Reorders the variable declarations to prefer a reverse Christmas tree
order to improve readability.

Signed-off-by: David Veenstra <davidjulianveenstra@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: ad2s1200: Sort includes alphabetically

This patches sorts all the includes in alphabetic order.

Signed-off-by: David Veenstra <davidjulianveenstra@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: ad2s1200: Remove unneeded include

This patches removes unneeded slab.h header.

Signed-off-by: David Veenstra <davidjulianveenstra@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: rename prox_config to als_prox_config

The configuration register on the device is represented with the
prox_config member on the tsl2x7x_settings structure. According to the
TSL2772 data sheet, this register can hold: 1) the proximity drive
level, 2) ALS/Proximity long wait, and 3) the ALS gain level. This
patch renames prox_config to als_prox_config since ALS settings can
be stored here as well.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: various comment cleanups

This patch removes several unnecessary comments, changes some comments
so that the use as much of the allowable 80 characters as possible, adds
the proper whitespace, removes some structure members from the kernel
docs that are no longer present, and improves the existing kernel doc
information for some existing structure members.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: use device defaults for als_time, prox_time and wait_time

This patch changes the defaults of the als_time, prox_time and
wait_time to match the defaults according to the TSL2772 datasheet.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: rename prx to prox for consistency

The driver mostly uses the 'prox' naming convention for most of the
proximity settings, however prx_time and tsl2x7x_prx_gain was present.
This patch renames these to prox_time and tsl2x7x_prox_gain for
consistency with everything else in the driver.

The kernel documentation for prx_gain is corrected to prox_gain so that
it matches what is actually in the structure.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: move power and diode settings into header file

The power and diode defines are needed for the platform data so this
patch moves the defines out of the .c file and into the header file. A
comment for the diode is also cleaned up while this code is touched.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: simplify device id verification

This patch renames tsl2x7x_device_id() to tsl2x7x_device_id_verif(),
removes the unnecessary pointer on the id parameter, and only calls
the verification function once.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: simplify tsl2x7x_write_interrupt_config return

tsl2x7x_write_interrupt_config() has an unnecessary return value check
at the end of the function. This patch changes the function to just
return the value from the call to tsl2x7x_invoke_change().

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: remove unnecessary chip status checks in suspend/resume

tsl2x7x_suspend() and tsl2x7x_resume() both check to see what the
current chip status is. These checks are not necessary so this patch
removes those checks.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: simplify tsl2x7x_clear_interrupts function

tsl2x7x_clear_interrupts() takes a reg argument but there are only
two callers to this function and both callers pass the same value.
Since this function was introduced, interrupts are now working
properly for this driver, and several unnecessary calls to
tsl2x7x_clear_interrupts() were removed. This patch removes the
tsl2x7x_clear_interrupts() function and replaces the two callers
with the i2c_smbus_write_byte() call instead.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: don't return error in IRQ handler

tsl2x7x_event_handler() could return an error and this could cause the
interrupt to remain masked. We shouldn't return an error in the
interrupt handler so this patch always returns IRQ_HANDLED. An error
will be logged if one occurs.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: move integration_time* attributes to IIO_INTENSITY channel

The integration_time* attributes are currently associated with the
IIO_LIGHT channel but should be associated with the IIO_INTENSITY
channel. Directory listing of the sysfs attributes for a TSL2772
with this patch applied:

dev
events
in_illuminance0_calibrate
in_illuminance0_calibscale_available
in_illuminance0_input
in_illuminance0_lux_table
in_illuminance0_target_input
in_intensity0_calibbias
in_intensity0_calibscale
in_intensity0_integration_time
in_intensity0_integration_time_available
in_intensity0_raw
in_intensity1_raw
in_proximity0_calibrate
in_proximity0_calibscale
in_proximity0_calibscale_available
in_proximity0_raw
name
of_node
power
subsystem
uevent

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: adc: simplify getting .drvdata

We should get drvdata from struct device directly. Going via
platform_device is an unneeded step back and forth.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: common: hid-sensors: simplify getting .drvdata

We should get drvdata from struct device directly. Going via
platform_device is an unneeded step back and forth.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: common: cros_ec_sensors: simplify getting .drvdata

We should get drvdata from struct device directly. Going via
platform_device is an unneeded step back and forth.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: st_accel: Add support for the SMO8840 ACPI id

The Lenovo Ideapad Miix 320 uses an st accelerometer with an ACPI id
of SMO8840, add support for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio:imu:mpu6050: support more interrupt types

Document that the hardware supports falling edge, rising edge, level
low, and level high interrupt types, rather than just rising edge.

The language used is the same as that in st_lsm6dsx.txt.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:imu: inv_mpu6050: support more interrupt types

Currently, we support only rising edge interrupts, and in fact we assume
that the interrupt we're given is rising edge (and things won't work if
it's not). However, the device supports rising edge, falling edge, level
low, and level high interrupts.

Empirically, on my system, switching to level interrupts has fixed a
problem I had with significant (~40%) interrupt loss with edge
interrupts. This issue is likely related to the SoC I'm using (Allwinner
H3), but being able to switch the interrupt type is still a very useful
workaround.

I tested this with each interrupt type and verified correct behavior in
a logic analyzer.

Add support for these interrupt types while also eliminating the error
case of the device tree and driver using different interrupt types.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: inv_mpu6050: use set_power_itg function in i2c mux

Set power function is rewritten manually inside i2c mux select.
Better use the already identical existing function.

Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: inv_mpu6050: clean set_power_itg and fix usage

Rewrite set_power_itg. Failing when turning power off is
no more decreasing the counter now and sleeping only happens
when effectively turning the chip on. Fix also usage in init
function (setting power on one time is sufficient to ensure
chip is effectively on).

Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: mcp320x: Use vendor prefix compatible strings

Update the example to use the compatible string including the
vendor prefix instead of the ones deprecated in 3a872138e4b.

Signed-off-by: Fabian Mewes <architekt@coding4coffee.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: ad7746: Fix bound checkings

Also remove unnecessary parenthesis

Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: sca3000: Handle errors returned by 'sca3000_configure_ring()' in 'sca3000_probe()'

'sca3000_configure_ring()' can fail, so test its return value and
propagate it if needed.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: sca3000: Fix an error handling path in 'sca3000_probe()'

Use 'devm_iio_kfifo_allocate()' instead of 'iio_kfifo_allocate()' in order
to simplify code and avoid a memory leak in an error path in
'sca3000_probe()'. A call to 'sca3000_unconfigure_ring()' was missing.

Sent via the next merge window as unimportant bug and there are
other patches dependent on it.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:dac:ad5686: Add AD5671R/75R/94/94R/95R/96/96R support

The AD5694/AD5694R/AD5695R/AD5696/AD5696R are a family of 4 channel DACs
with 12-bit, 14-bit and 16-bit precision respectively. The devices have
either no built-in reference, or built-in 2.5V reference.

The AD5671R/AD5675R are similar, except that they have 8 instead of 4
channels.

These devices are similar to AD5672R/AD5676/AD5676R and
AD5684/AD5684R/AD5684/AD5685R/AD5686/AD5686R, except that they use i2c
instead of spi.

Datasheets:
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5671R_5675R.pdf
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5696R_5695R_5694R.pdf

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:dac:ad5686: Refactor the driver

In this patch restructures the existing ad5686 driver by adding a module
for SPI and a header file, while the baseline module deals with the
chip-logic.

This is a necessary step, as this driver should support in the future
similar devices which differ only in the type of interface used (I2C
instead of SPI).

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:dac:ad5686: Add AD5672R/76/76R/84R/86R support

The AD5684R/AD5686R are a family of 4 channel DACs with 12-bit, 14-bit and
16-bit precision respectively. The devices come either with a built-in
reference or no built-in reference.

The AD5672R/AD5676/AD5676R are similar, except that they have 8 channels
instead of 4.

Datasheets:
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5672R_5676R.pdf
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5686R_5685R_5684R.pdf

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:dac:ad5686: Add support for AD5685R

This driver acctually supports the AD5685R device and NOT the AD5685, which
does not exist.  Maintain old id entry in case we have devicetrees
out there which are using the wrong name.

More information can be found in the datasheet:
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5686_5684.pdf

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:dac:ad5686: Add support for various number of channels

This patch adds a new num_channels attribute as part of the
ad5686_chip_info struct which replaces the AD5686_DAC_CHANNELS define. This
is a necessary step, since this driver should support similar devices which
differ only in the number of channels.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:dac:ad5686: Change license description

Add GPLv2+ SPDX identifier and remove license notice to keep the whole
purpose of using an SPDx id.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:dac:ad5686: Style fixes no functional changes

This patch fixes some indentation issues and does not modify the
functionality of the driver.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: Add mpu9255 support to mpu6050 driver

Added support for the mpu9255 IMU to the mpu6050 driver. The
register map is the same as the other chips; the only driver
difference is the compatible string and the WHOAMI register
value.

Signed-off-by: Douglas Fischer <fischerdouglasc@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: chemical: atlas-ph-sensor: use msleep() for long uncritical delays

usleep_range() uses hrtimers and provides no advantage over msleep()
for larger delays.

Cc: Nicholas Mc Guire <hofrat@osadl.org>
Link: http://lkml.org/lkml/2017/1/11/377
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: potentiometer: mcp4531: switch to using .probe_new

Use the new probe style for i2c drivers.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: potentiometer: mcp4018: switch to using .probe_new

Use the new probe style for i2c drivers.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: inv_mpu6050: do not flush fifo when iio buffer is full

There is no need to flush fifo and loose all data when the iio
buffer is full. Just drop the data by ignoring the error as
commonly done in other drivers.

Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Reviewed-by: Martin Kelly <martin@martingkelly.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: ad7746: Reorder variable declarations

Reorder some variable declarations in an inverse-pyramid scheme.

Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: ad7746: Reorder includes alphabetically

Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: ad7746: Fix multiple line dereference

Clear checkpatch.pl WARNING about multiple line derefence but creates a
new one of line over 80 characters. In my opinion, it improves
readability.

Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: ad7746: Adjust arguments to match open parenthesis

Clear a couple more checkpatch.pl CHECKS.

Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: ad7746: Automatically swap values in readings/writings

Data to read or write was being handled with the swab16() macro instead
of using i2c_smbus_{read,write}_swapped.

Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Documentation: dt: iio: imu: st_lsm6dsx: add ism330dlc sensor device binding

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: add support to ism330dlc

Add support to STM ISM330DLC 6-axis (acc + gyro) Mems sensor
http://www.st.com/resource/en/datasheet/ism330dlc.pdf

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: fix FIFO threshold mask for LSM6DSM/LSM6DSL

According to the latest datasheet, LSM6DSM and LSM6DSL imu sensors
export GENMASK(10, 0) for FIFO threshold mask definition. Despite
that is not an actual issue since write on fifo_th register is protected
by max_fifo_size value, fix fifo_th and fifo_diff register definitions

Fixes: 290a6ce11d93 ("iio: imu: add support to lsm6dsx driver")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: adis16209: Move adis16209 driver out of staging

Move the adis16209 driver out of staging directory and merge to the
mainline IIO subsystem.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: adis16209: Use GENMASK

Use GENMASK to improve readability and remove the local
variables used to store intermediate data.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: adis16209: Remove unused headers

Remove few unused header files since the adis core handles
the sysfs and buffer support.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: adis16209: Add a blank line after return statements

Add a blank line after return statements to improve the code
readability.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: adis16209: Prefer reverse christmas tree ordering

Prefer reverse christmas tree ordering of declarations to
improve readability.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: adis16209: Indent the field definitions

Have indentation in field definitions to make them
clearly different from the register addresses.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: inv_mpu6050: clean double declaration of set_power_itg

Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: meson-saradc: add support for Meson AXG

Add the SAR ADC driver for the Amlogic Meson-AXG SoC.

Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: document the Meson AXG support

Update the documentation to expicitly support the Meson-AXG SoC.

Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: meson-saradc: squash and share the common adc platform data

Extract and promote common adc platform data into a new structure,
to make it better share the info between several SoCs,
this will avoid duplicating the code all over the place,
Save a few memory and make the code more maintainable.

Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: use either direction for IIO_EV_INFO_{ENABLE,PERIOD}

The events IIO_EV_INFO_VALUE and IIO_EV_INFO_ENABLE currently have a
falling and rising direction configured. There does not need to be a
separate distinction so this patch changes these to use the
either direction. Directory listing of event sysfs attributes for a
TSL2772 with this patch applied:

in_intensity0_thresh_either_en
in_intensity0_thresh_either_period
in_intensity0_thresh_falling_value
in_intensity0_thresh_rising_value
in_proximity0_thresh_either_en
in_proximity0_thresh_either_period
in_proximity0_thresh_falling_value
in_proximity0_thresh_rising_value

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: use auto increment I2C protocol

The hardware supports 16-bit ALS and proximity readings, however the
datasheet recommends using the I2C auto increment protocol so that the
correct high and low bytes are read even if the integration cycle ends
between reading the lower and upper registers.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: accel: adis16201: Move adis16201 driver out of staging

Move adis16201 driver out of staging and merge into mainline
IIO subsystem.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: accel: adis16201: Fix 80 character line limit

Split the line over 80 characters limit to fix checkpatch
warning.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: accel: adis16201: Use GENMASK

Use GENMASK to improve readability and remove the local variables used to
store intermediate data.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: accel: adis16201: Remove unused headers

Remove few unused headers files since the adis core handles the buffer and
sysfs support.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: add copyright

Add Brian Masney's copyright and to the list of module authors for all
of the staging cleanups. This patch also update's Jon Brenner's current
work email address since AMS now owns TAOS.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: put local variables in reverse Christmas tree order

This patch ensures that all of the local variable declarations are in
reverse Christmas tree order where possible to increase code
readability.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: remove ch0 and ch1 variables from tsl2x7x_get_lux()

Remove the ch0 and ch1 variables from tsl2x7x_get_lux() and
write those values directly into the chip->als_cur_info.als_ch0
and chip->als_cur_info.als_ch01 variables.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: remove unused variables from tsl2x7x_get_lux()

tsl2x7x_get_lux() has a ch0lux and ch1lux variables that are not used
so this patch removes them.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: split out als and prox persistence settings

The struct tsl2x7x_settings contained a persistence member that
contained both the ALS and proximity persistence fields. This patch
splits this out into two separate fields so that the bitmasks in
several parts of the code are no longer necessary.

The default persistence settings are also changed by this patch from:

- Proximity: 0 (Every proximity cycle generates an interrupt)
- ALS: 255 (60 consecutive values out of range)

to something a little more reasonable based on my testing:

- Proximity: 1 (1 proximity value out of range)
- ALS: 1 (1 value outside of threshold range)

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: make logging consistent and correct newlines

This patch updates all of the logging commands so that they are
consistent with the other messages, includes __func__ in the message,
and all of the messages include newlines. This patch also removes some
debug log messages.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: split out als and prox interrupt settings

The struct tsl2x7x_settings contained an interrupts_en member that was
a bitmask for which interrupts are enabled. This required having
bitmasks in several parts of the code. This patch splits this field
out into two booleans to remove most of the bitmasks in the code.

This patch also fixes a bug where if an interrupt pin was configured,
but proximity interrupts were disabled, then the proximity value could
not be polled.

This patch also removes an unnecessary second call to writing the
control register in tsl2x7x_chip_on().

Driver tested using a TSL2772 hooked up to a Raspberry Pi 2.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: simplify tsl2x7x_prox_cal()

tsl2x7x_prox_cal() would set the interrupt flag, and reset the device to
start doing the calibration routine. However, this did not actually
affect the readings since they are polled. This patch drops the interrupt
code.

This patch also drops the function tsl2x7x_prox_calculate() and removes
support for the standard deviation and min sample since those values
were not used.

Driver was tested using a TSL2772 hooked up to a Raspberry Pi 2. I
performed the following testing at various distances:

- Put hand in front of sensor and keep the sensor and hand stationary.
- Perform calibration routine.
- Run iio_event_monitor.
- Verify that a proximity event is triggered when my hand comes
  anywhere between the sensor and where I performed the calibration
  routine.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: no need to clear interrupt flag when getting lux

tsl2x7x_get_lux() does not need to clear the interrupt flag when
querying the ALS. The interrupt flag is cleared in
tsl2x7x_event_handler(). This patches removes the unnecessary code.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: correct interrupt handler trigger

tsl2x7x_event_handler() was not called as expected when the device was
asserting a hardware interrupt. This patch changes the interrupt line
trigger from rising to falling.

The driver was tested on a TSL2772 hooked up to a Raspberry Pi 2. The
interrupt pin also had a 10K pull-up resistor per the requirements from
the datasheet. The relevant device tree binding:

&i2c1 {
tsl2772@39 {
compatible = "amstaos,tsl2772";
reg = <0x39>;
interrupt-parent = <&gpio>;
interrupts = <22 0x2>;
};
};

With this patch, iio_event_monitor now shows the events when the
channels are outside the defined interrupt thresholds.

$ sudo ./iio_event_monitor tsl2772
Found IIO device with name tsl2772 with device number 0
Event: time: 1478193460053760446, type: proximity, channel: 0, evtype:
thresh, direction: either
...
Event: time: 1478193463020270185, type: illuminance, channel: 0, evtype:
thresh, direction: either
...

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: tsl2x7x: remove unnecessary code

As a follow up to the work in commit a0722d05a195 ("staging: iio:
tsl2x7x: convert mutex_trylock() to mutex_lock()"), this patch removes
the unnecessary calls to tsl2x7x_get_prox() and tsl2x7x_get_lux() in
tsl2x7x_event_handler(). Previously, these functions were locked with
mutex_trylock(), but that is no longer the case. This patch also removes
a comment that is no longer relevant about returning the last sample.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging:iio:ade7854: Remove read_reg_* duplications

The original code had a read function per data size; after updates, all
read functions tasks were centralized in a single function, but the old
signature was kept to maintain the module working without problems. This
patch removes a set of duplications associated with read_reg_*, and
update the areas that calling the old interface by the new one.

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging:iio:ade7854: Rework SPI read function

Rework read SPI function to reduce the code duplication and centralizes
all the task in a single function.

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging:iio:ade7854: Rework I2C read function

The read operation for the I2C function has many duplications that can
be generalized into a single function. This patch reworks the read
operation for I2C to centralizes all similar code in a single function.

It is possible to remove all the old interface to use the new one,
however, for keeping the things simple and working this patch maintain
legacy interface.

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging:iio:ade7854: Remove write_reg_* duplications

This patch removes code duplications related to the write_reg_*
functions and centralizes them in a single function. Also, it eliminates
the legacy functions and replaces them by a unique signature that is
used by SPI and I2C.

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging:iio:ade7854: Rework SPI write function

The write operation using SPI has a many code duplications (similar to
I2C) and four different interfaces per data size. This patch introduces
a single function that centralizes the main task related to SPI.

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging:iio:ade7854: Rework I2C write function

The write operation using I2C has many code duplications and four
different interfaces per data size. This patch introduces a single
function that centralizes the main tasks.

The central function inserted by this patch can easily replace all the
four functions related to the data size. However, this patch does not
remove any code signature for keeping the meter module work and make
easier to review this patch.

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging:iio:ade7854: Fix the wrong number of bits to read

Fixes: correctly handle the data size in the read operation for I2C
The function ade7854_i2c_read_reg_32() have to invoke the
i2c_master_recv() for read 32 bits values, however, the counter is set
to 3 which means 24 bits. This patch fixes the wrong size of 24 bits, to
32 bits.

Signed-off-by: John Syne <john3909@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Fixes: 8d97a5877 ("staging: iio: meter: new driver for ADE7754 devices")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging:iio:ade7854: Fix error handling on read/write

The original code does not correctly handle the error related to I2C
read and write. This patch fixes the error handling related to all
read/write functions for I2C.

Signed-off-by: John Syne <john3909@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Fixes: 8d97a5877 ("staging: iio: meter: new driver for ADE7754 devices")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: accel: adis16201: Adjust argument to match open parentheses

In adis16201_read_raw() adjust an argument to match an open parentheses
using tabs and spaces.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: accel: adis16201: Prefer reverse christmas tree ordering

Prefer reverse christmas tree ordering of declarations to improve
readability.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: accel: adis16201: Use sign_extend32 function

Use sign_extned32() for 32 bit sign extending rather than hard coding.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: accel: adis16201: Add comments about units in read_raw()

Clarify the conversion and formation of resultant data in the
adis16201_read_raw() with sufficient comments and remove the unnecessary
comments.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: accel: adis16201: Group register definitions

Group register definitions with its register field bits to improve
readability and easy identification. A small comment is also added to
denote the purpose/functionality of the grouped register definitions.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: accel: adis16201: Add _REG suffix to registers

Add a _REG suffix to distinguish between registers and the register bit
fileds.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: accel: adis16201: Remove unnecessary comments

Remove few unnecessary comments since the macro definitions clearly
justify their purpose.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: accel: adis16201: Rename few macro definitions

Rename the macro definitions with suitable names specifying their
purpose.

* ADIS16201_STARTUP_DELAY_MS: Remove the comment specifying the delay in
  microseconds and rename it with addtition of _MS suffix.

* ADIS16201_MSC_CTRL_ACTIVE_DATA_RDY_HIGH: Rename the macro to make it
  similar to other misc control registers which denotes the data ready
  polarity.

* ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT: Rename to denote it is a
  failure bit.

* ADIS16201_GLOB_CMD_FACTORY_RESET: Remove ambiguous _CAL suffix and add
  _RESET suffix instead to denote factory reset command.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7780: remove IIO_CHAN_INFO_SAMP_FREQ support

The `ad7780` driver does not implement setting/getting the sampling
frequency.
For the ad7780/ad7781 devices, the control is done via an external pin,
and the ad7170/ad7171 devices have a fixed sampling rate (so, no control).

For these devices, and similar other that may be added later on,
a AD_SD_CHANNEL_NO_SAMPLE_FREQ() macro has been added, which doesn't set
the IIO_CHAN_INFO_SAMP_FREQ flag.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7791: implement IIO_CHAN_INFO_SAMP_FREQ

Now that the old read/write frequency sysfs attrs have been removed, we
have a clean slate to implement IIO_CHAN_INFO_SAMP_FREQ.

This driver also pre-dates IIO_CHAN_INFO_SAMP_FREQ, and this change
implements this behavior.

The `ad7791_write_raw` would have overlapped quite a bit with the old
read/write frequency functions, making things a bit harder to follow.

Fixes: a13e831fcaa7 ("staging: iio: ad7192: implement
IIO_CHAN_INFO_SAMP_FREQ")

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7791: remove sample freq sysfs attributes

In the current state, these attributes are broken, because they are
registered already, and the kernel throws a warning.
The first registration happens via the `IIO_CHAN_INFO_SAMP_FREQ` flag from
the `ad_sigma_delta` driver.

In this commit these attrs are removed, and in the following the
IIO_CHAN_INFO_SAMP_FREQ behavior will be implemented, which replaces these
hooks.

This is done to make things a bit easier to review as there is a bit of
overlap in the patch if it's done all at once.

Fixes: a13e831fcaa7 ("staging: iio: ad7192: implement IIO_CHAN_INFO_SAMP_FREQ")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: cros_ec: Move cros_ec_sensors_core.h in /include

Similar to other common iio frameworks, move cros_ec_sensors_core.h from
drivers/iio/common/cros_ec_sensors/ to include/linux/iio/common.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: stx104: Implement get_multiple callback

The Apex Embedded Systems STX104 series of devices provides 4 TTL
compatible lines of inputs accessed via a single 4-bit port. Since four
input lines are acquired on a single port input read, the STX104 GPIO
driver may improve multiple input reads by utilizing a get_multiple
callback. This patch implements the stx104_gpio_get_multiple function
which serves as the respective get_multiple callback.

Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

uapi: remove telephony headers

ixjuser.h includes the telephony.h header. Other than that no kernel
code uses any of these headers. The last user of the ixjuser.h header
has been removed in commit 7326446c728 (Staging: remove telephony
drivers), more than 5 years ago.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-dpaa2/ethsw: Add TODO

Add a TODO file describing what needs to be added/changed before the driver
can be moved out of staging.

Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-dpaa2/ethsw: Add README

Add a README file describing the driver architecture, components and
interfaces.

Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>