net: rfkill: gpio: prevent value glitch during probe

commit b2f750c3a80b285cd60c9346f8c96bd0a2a66cde upstream.

When either reset- or shutdown-gpio have are initially deasserted,
e.g. after a reboot - or when the hardware does not include pull-down,
there will be a short toggle of both IOs to logical 0 and back to 1.

It seems that the rfkill default is unblocked, so the driver should not
glitch to output low during probe.
It can lead e.g. to unexpected lte modem reconnect:

[1] root@localhost:~# dmesg | grep "usb 2-1"
[    2.136124] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[   21.215278] usb 2-1: USB disconnect, device number 2
[   28.833977] usb 2-1: new SuperSpeed USB device number 3 using xhci-hcd

The glitch has been discovered on an arm64 board, now that device-tree
support for the rfkill-gpio driver has finally appeared :).

Change the flags for devm_gpiod_get_optional from GPIOD_OUT_LOW to
GPIOD_ASIS to avoid any glitches.
The rfkill driver will set the intended value during rfkill_sync_work.

Fixes: 7176ba23f8b5 ("net: rfkill: add generic gpio rfkill driver")
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20231004163928.14609-1-josua@solid-run.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv6: fix return value check in esp_remove_trailer

commit dad4e491e30b20f4dc615c9da65d2142d703b5c2 upstream.

In esp_remove_trailer(), to avoid an unexpected result returned by
pskb_trim, we should check the return value of pskb_trim().

Signed-off-by: Ma Ke <make_ruc2021@163.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv4: fix return value check in esp_remove_trailer

commit 513f61e2193350c7a345da98559b80f61aec4fa6 upstream.

In esp_remove_trailer(), to avoid an unexpected result returned by
pskb_trim, we should check the return value of pskb_trim().

Signed-off-by: Ma Ke <make_ruc2021@163.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: cfg80211: use system_unbound_wq for wiphy work

commit 91d20ab9d9ca035527af503d00e1e30d6c375f2a upstream.

Since wiphy work items can run pretty much arbitrary
code in the stack/driver, it can take longer to run
all of this, so we shouldn't be using system_wq via
schedule_work(). Also, we lock the wiphy (which is
the reason this exists), so use system_unbound_wq.

Reported-and-tested-by: Kalle Valo <kvalo@kernel.org>
Fixes: a3ee4dc84c4e ("wifi: cfg80211: add a work abstraction with special semantics")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: interface: use DEV_STATS_INC()

commit f7c4e3e5d4f6609b4725a97451948ca2e425379a upstream.

syzbot/KCSAN reported data-races in xfrm whenever dev->stats fields
are updated.

It appears all of these updates can happen from multiple cpus.

Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.

BUG: KCSAN: data-race in xfrmi_xmit / xfrmi_xmit

read-write to 0xffff88813726b160 of 8 bytes by task 23986 on cpu 1:
xfrmi_xmit+0x74e/0xb20 net/xfrm/xfrm_interface_core.c:583
__netdev_start_xmit include/linux/netdevice.h:4889 [inline]
netdev_start_xmit include/linux/netdevice.h:4903 [inline]
xmit_one net/core/dev.c:3544 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560
__dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
neigh_connected_output+0x231/0x2a0 net/core/neighbour.c:1581
neigh_output include/net/neighbour.h:542 [inline]
ip_finish_output2+0x74a/0x850 net/ipv4/ip_output.c:230
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:318
NF_HOOK_COND include/linux/netfilter.h:293 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:432
dst_output include/net/dst.h:458 [inline]
ip_local_out net/ipv4/ip_output.c:127 [inline]
ip_send_skb+0x72/0xe0 net/ipv4/ip_output.c:1487
udp_send_skb+0x6a4/0x990 net/ipv4/udp.c:963
udp_sendmsg+0x1249/0x12d0 net/ipv4/udp.c:1246
inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:840
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
____sys_sendmsg+0x37c/0x4d0 net/socket.c:2540
___sys_sendmsg net/socket.c:2594 [inline]
__sys_sendmmsg+0x269/0x500 net/socket.c:2680
__do_sys_sendmmsg net/socket.c:2709 [inline]
__se_sys_sendmmsg net/socket.c:2706 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2706
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read-write to 0xffff88813726b160 of 8 bytes by task 23987 on cpu 0:
xfrmi_xmit+0x74e/0xb20 net/xfrm/xfrm_interface_core.c:583
__netdev_start_xmit include/linux/netdevice.h:4889 [inline]
netdev_start_xmit include/linux/netdevice.h:4903 [inline]
xmit_one net/core/dev.c:3544 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560
__dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
neigh_connected_output+0x231/0x2a0 net/core/neighbour.c:1581
neigh_output include/net/neighbour.h:542 [inline]
ip_finish_output2+0x74a/0x850 net/ipv4/ip_output.c:230
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:318
NF_HOOK_COND include/linux/netfilter.h:293 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:432
dst_output include/net/dst.h:458 [inline]
ip_local_out net/ipv4/ip_output.c:127 [inline]
ip_send_skb+0x72/0xe0 net/ipv4/ip_output.c:1487
udp_send_skb+0x6a4/0x990 net/ipv4/udp.c:963
udp_sendmsg+0x1249/0x12d0 net/ipv4/udp.c:1246
inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:840
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
____sys_sendmsg+0x37c/0x4d0 net/socket.c:2540
___sys_sendmsg net/socket.c:2594 [inline]
__sys_sendmmsg+0x269/0x500 net/socket.c:2680
__do_sys_sendmmsg net/socket.c:2709 [inline]
__se_sys_sendmmsg net/socket.c:2706 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2706
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x00000000000010d7 -> 0x00000000000010d8

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 23987 Comm: syz-executor.5 Not tainted 6.5.0-syzkaller-10885-g0468be89b3fa #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023

Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: fix a data-race in xfrm_gen_index()

commit 3e4bc23926b83c3c67e5f61ae8571602754131a6 upstream.

xfrm_gen_index() mutual exclusion uses net->xfrm.xfrm_policy_lock.

This means we must use a per-netns idx_generator variable,
instead of a static one.
Alternative would be to use an atomic variable.

syzbot reported:

BUG: KCSAN: data-race in xfrm_sk_policy_insert / xfrm_sk_policy_insert

write to 0xffffffff87005938 of 4 bytes by task 29466 on cpu 0:
xfrm_gen_index net/xfrm/xfrm_policy.c:1385 [inline]
xfrm_sk_policy_insert+0x262/0x640 net/xfrm/xfrm_policy.c:2347
xfrm_user_policy+0x413/0x540 net/xfrm/xfrm_state.c:2639
do_ipv6_setsockopt+0x1317/0x2ce0 net/ipv6/ipv6_sockglue.c:943
ipv6_setsockopt+0x57/0x130 net/ipv6/ipv6_sockglue.c:1012
rawv6_setsockopt+0x21e/0x410 net/ipv6/raw.c:1054
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697
__sys_setsockopt+0x1c9/0x230 net/socket.c:2263
__do_sys_setsockopt net/socket.c:2274 [inline]
__se_sys_setsockopt net/socket.c:2271 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2271
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffffffff87005938 of 4 bytes by task 29460 on cpu 1:
xfrm_sk_policy_insert+0x13e/0x640
xfrm_user_policy+0x413/0x540 net/xfrm/xfrm_state.c:2639
do_ipv6_setsockopt+0x1317/0x2ce0 net/ipv6/ipv6_sockglue.c:943
ipv6_setsockopt+0x57/0x130 net/ipv6/ipv6_sockglue.c:1012
rawv6_setsockopt+0x21e/0x410 net/ipv6/raw.c:1054
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697
__sys_setsockopt+0x1c9/0x230 net/socket.c:2263
__do_sys_setsockopt net/socket.c:2274 [inline]
__se_sys_setsockopt net/socket.c:2271 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2271
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x00006ad8 -> 0x00006b18

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 29460 Comm: syz-executor.1 Not tainted 6.5.0-rc5-syzkaller-00243-g9106536c1aa3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023

Fixes: 1121994c803f ("netns xfrm: policy insertion in netns")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: fix a data-race in xfrm_lookup_with_ifid()

commit de5724ca38fd5e442bae9c1fab31942b6544012d upstream.

syzbot complains about a race in xfrm_lookup_with_ifid() [1]

When preparing commit 0a9e5794b21e ("xfrm: annotate data-race
around use_time") I thought xfrm_lookup_with_ifid() was modifying
a still private structure.

[1]
BUG: KCSAN: data-race in xfrm_lookup_with_ifid / xfrm_lookup_with_ifid

write to 0xffff88813ea41108 of 8 bytes by task 8150 on cpu 1:
xfrm_lookup_with_ifid+0xce7/0x12d0 net/xfrm/xfrm_policy.c:3218
xfrm_lookup net/xfrm/xfrm_policy.c:3270 [inline]
xfrm_lookup_route+0x3b/0x100 net/xfrm/xfrm_policy.c:3281
ip6_dst_lookup_flow+0x98/0xc0 net/ipv6/ip6_output.c:1246
send6+0x241/0x3c0 drivers/net/wireguard/socket.c:139
wg_socket_send_skb_to_peer+0xbd/0x130 drivers/net/wireguard/socket.c:178
wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline]
wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703
worker_thread+0x525/0x730 kernel/workqueue.c:2784
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

write to 0xffff88813ea41108 of 8 bytes by task 15867 on cpu 0:
xfrm_lookup_with_ifid+0xce7/0x12d0 net/xfrm/xfrm_policy.c:3218
xfrm_lookup net/xfrm/xfrm_policy.c:3270 [inline]
xfrm_lookup_route+0x3b/0x100 net/xfrm/xfrm_policy.c:3281
ip6_dst_lookup_flow+0x98/0xc0 net/ipv6/ip6_output.c:1246
send6+0x241/0x3c0 drivers/net/wireguard/socket.c:139
wg_socket_send_skb_to_peer+0xbd/0x130 drivers/net/wireguard/socket.c:178
wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline]
wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703
worker_thread+0x525/0x730 kernel/workqueue.c:2784
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

value changed: 0x00000000651cd9d1 -> 0x00000000651cd9d2

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 15867 Comm: kworker/u4:58 Not tainted 6.6.0-rc4-syzkaller-00016-g5e62ed3b1c8a #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/06/2023
Workqueue: wg-kex-wg2 wg_packet_handshake_send_worker

Fixes: 0a9e5794b21e ("xfrm: annotate data-race around use_time")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: fix LL2 RX buffer allocation

commit 2f3389c73832ad90b63208c0fc281ad080114c7a upstream.

Driver allocates the LL2 rx buffers from kmalloc()
area to construct the skb using slab_build_skb()

The required size allocation seems to have overlooked
for accounting both skb_shared_info size and device
placement padding bytes which results into the below
panic when doing skb_put() for a standard MTU sized frame.

skbuff: skb_over_panic: text:ffffffffc0b0225f len:1514 put:1514
head:ff3dabceaf39c000 data:ff3dabceaf39c042 tail:0x62c end:0x566
dev:<NULL>
…
skb_panic+0x48/0x4a
skb_put.cold+0x10/0x10
qed_ll2b_complete_rx_packet+0x14f/0x260 [qed]
qed_ll2_rxq_handle_completion.constprop.0+0x169/0x200 [qed]
qed_ll2_rxq_completion+0xba/0x320 [qed]
qed_int_sp_dpc+0x1a7/0x1e0 [qed]

This patch fixes this by accouting skb_shared_info and device
placement padding size bytes when allocating the buffers.

Cc: David S. Miller <davem@davemloft.net>
Fixes: 0a7fb11c23c0 ("qed: Add Light L2 support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: codecs: wcd938x: fix resource leaks on bind errors

commit da29b94ed3547cee9d510d02eca4009f2de476cf upstream.

Add the missing code to release resources on bind errors, including the
references taken by wcd938x_sdw_device_get() which also need to be
dropped on unbind().

Fixes: 16572522aece ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-4-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: codecs: wcd938x: fix unbind tear down order

commit fa2f8a991ba4aa733ac1c3b1be0c86148aa4c52c upstream.

Make sure to deregister the component before tearing down the resources
it depends on during unbind().

Fixes: 16572522aece ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-3-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: codecs: wcd938x: drop bogus bind error handling

commit bfbc79de60c53e5fed505390440b87ef59ee268c upstream.

Drop the bogus error handling for a soundwire device backcast during
bind() that cannot fail.

Fixes: 16572522aece ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-2-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: codecs: wcd938x-sdw: fix runtime PM imbalance on probe errors

commit c5c0383082eace13da2ffceeea154db2780165e7 upstream.

Make sure to balance the runtime PM operations, including the disable
count, on probe errors and on driver unbind.

Fixes: 16572522aece ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-8-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: codecs: wcd938x-sdw: fix use after free on driver unbind

commit f0dfdcbe706462495d47982eecd13a61aabd644d upstream.

Make sure to deregister the component when the driver is being unbound
and before the underlying device-managed resources are freed.

Fixes: 16572522aece ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-7-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/relatek: Enable Mute LED on HP Laptop 15s-fq5xxx

commit 56e85993896b914032d11e32ecbf8415e7b2f621 upstream.

This HP Laptop uses ALC236 codec with COEF 0x07 controlling the
mute LED. Enable existing quirk for this device.

Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231016221328.1521674-1-l.guzenko@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for ASUS ROG GU603ZV

commit 5dedc9f53eef7ec07b23686381100d03fb259f50 upstream.

Enables the SPI-connected Cirrus amp and the required pins
for headset mic detection.

As of BIOS version 313 it is still necessary to modify the
ACPI table to add the related _DSD properties:
  https://gist.github.com/Flex1911/1bce378645fc95a5743671bd5deabfc8

Signed-off-by: Artem Borisov <dedsa2002@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231014075044.17474-1-dedsa2002@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Fixed ASUS platform headset Mic issue

commit c8c0a03ec1be6b3f3ec1ce91685351235212db19 upstream.

ASUS platform Headset Mic was disable by default.
Assigned verb table for Mic pin will enable it.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1155d914c20c40569f56d36c79254879@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mediatek: Correctly free sg_table in gem prime vmap

commit dcc583c225e659d5da34b4ad83914fd6b51e3dbf upstream.

The MediaTek DRM driver implements GEM PRIME vmap by fetching the
sg_table for the object, iterating through the pages, and then
vmapping them. In essence, unlike the GEM DMA helpers which vmap
when the object is first created or imported, the MediaTek version
does it on request.

Unfortunately, the code never correctly frees the sg_table contents.
This results in a kernel memory leak. On a Hayato device with a text
console on the internal display, this results in the system running
out of memory in a few days from all the console screen cursor updates.

Add sg_free_table() to correctly free the contents of the sg_table. This
was missing despite explicitly required by mtk_gem_prime_get_sg_table().

Also move the "out" shortcut label to after the kfree() call for the
sg_table. Having sg_free_table() together with kfree() makes more sense.
The shortcut is only used when the object already has a kernel address,
in which case the pointer is NULL and kfree() does nothing. Hence this
change causes no functional change.

Fixes: 3df64d7b0a4f ("drm/mediatek: Implement gem prime vmap/vunmap function")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231004083226.1940055-1-wenst@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Retry gtt fault when out of fence registers

commit e339c6d628fe66c9b64bf31040a55770952aec57 upstream.

If we can't find a free fence register to handle a fault in the GMADR
range just return VM_FAULT_NOPAGE without populating the PTE so that
userspace will retry the access and trigger another fault. Eventually
we should find a free fence and the fault will get properly handled.

A further improvement idea might be to reserve a fence (or one per CPU?)
for the express purpose of handling faults without having to retry. But
that would require some additional work.

Looks like this may have gotten broken originally by
commit 39965b376601 ("drm/i915: don't trash the gtt when running out of fences")
as that changed the errno to -EDEADLK which wasn't handle by the gtt
fault code either. But later in commit 2feeb52859fc ("drm/i915/gt: Fix
-EDEADLK handling regression") I changed it again to -ENOBUFS as -EDEADLK
was now getting used for the ww mutex dance. So this fix only makes
sense after that last commit.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9479
Fixes: 2feeb52859fc ("drm/i915/gt: Fix -EDEADLK handling regression")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012132801.16292-1-ville.syrjala@linux.intel.com
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
(cherry picked from commit 7f403caabe811b88ab0de3811ff3f4782c415761)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmet-tcp: Fix a possible UAF in queue intialization setup

commit d920abd1e7c4884f9ecd0749d1921b7ab19ddfbd upstream.

From Alon:
"Due to a logical bug in the NVMe-oF/TCP subsystem in the Linux kernel,
a malicious user can cause a UAF and a double free, which may lead to
RCE (may also lead to an LPE in case the attacker already has local
privileges)."

Hence, when a queue initialization fails after the ahash requests are
allocated, it is guaranteed that the queue removal async work will be
called, hence leave the deallocation to the queue removal.

Also, be extra careful not to continue processing the socket, so set
queue rcv_state to NVMET_TCP_RECV_ERR upon a socket error.

Cc: stable@vger.kernel.org
Reported-by: Alon Zahavi <zahavi.alon@gmail.com>
Tested-by: Alon Zahavi <zahavi.alon@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_payload: fix wrong mac header matching

commit d351c1ea2de3e36e608fc355d8ae7d0cc80e6cd6 upstream.

mcast packets get looped back to the local machine.
Such packets have a 0-length mac header, we should treat
this like "mac header not set" and abort rule evaluation.

As-is, we just copy data from the network header instead.

Fixes: 96518518cc41 ("netfilter: add nftables")
Reported-by: Blažej Krajňák <krajnak@levonet.sk>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: fix deadlock in mark_as_free_ex

commit bfbe5b31caa74ab97f1784fe9ade5f45e0d3de91 upstream.

Reported-by: syzbot+e94d98936a0ed08bde43@syzkaller.appspotmail.com
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: fix panic about slab-out-of-bounds caused by ntfs_list_ea()

commit 8e7e27b2ee1e19c4040d4987e345f678a74c0aed upstream.

Here is a BUG report about linux-6.1 from syzbot, but it still remains
within upstream:

BUG: KASAN: slab-out-of-bounds in ntfs_list_ea fs/ntfs3/xattr.c:191 [inline]
BUG: KASAN: slab-out-of-bounds in ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710
Read of size 1 at addr ffff888021acaf3d by task syz-executor128/3632

Call Trace:
 kasan_report+0x139/0x170 mm/kasan/report.c:495
 ntfs_list_ea fs/ntfs3/xattr.c:191 [inline]
 ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710
 vfs_listxattr fs/xattr.c:457 [inline]
 listxattr+0x293/0x2d0 fs/xattr.c:804
 path_listxattr fs/xattr.c:828 [inline]
 __do_sys_llistxattr fs/xattr.c:846 [inline]

Before derefering field members of `ea` in unpacked_ea_size(), we need to
check whether the EA_FULL struct is located in access validate range.

Similarly, when derefering `ea->name` field member, we need to check
whethe the ea->name is located in access validate range, too.

Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations")
Reported-by: syzbot+9fcea5ef6dc4dc72d334@syzkaller.appspotmail.com
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
[almaz.alexandrovich@paragon-software.com: took the ret variable out of the loop block]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Fix possible null-pointer dereference in hdr_find_e()

commit 1f9b94af923c88539426ed811ae7e9543834a5c5 upstream.

Upon investigation of the C reproducer provided by Syzbot, it seemed
the reproducer was trying to mount a corrupted NTFS filesystem, then
issue a rename syscall to some nodes in the filesystem. This can be
shown by modifying the reproducer to only include the mount syscall,
and investigating the filesystem by e.g. `ls` and `rm` commands. As a
result, during the problematic call to `hdr_fine_e`, the `inode` being
supplied did not go through `indx_init`, hence the `cmp` function
pointer was never set.

The fix is simply to check whether `cmp` is not set, and return NULL
if that's the case, in order to be consistent with other error
scenarios of the `hdr_find_e` method. The rationale behind this patch
is that:

- We should prevent crashing the kernel even if the mounted filesystem
  is corrupted. Any syscalls made on the filesystem could return
  invalid, but the kernel should be able to sustain these calls.

- Only very specific corruption would lead to this bug, so it would be
  a pretty rare case in actual usage anyways. Therefore, introducing a
  check to specifically protect against this bug seems appropriate.
  Because of its rarity, an `unlikely` clause is used to wrap around
  this nullity check.

Reported-by: syzbot+60cf892fc31d1f4358fc@syzkaller.appspotmail.com
Signed-off-by: Ziqi Zhao <astrajoan@yahoo.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: more conservative check for zero probes

commit 72377ab2d671befd6390a1d5677f5cca61235b65 upstream.

Christoph reported that the MPTCP protocol can find the subflow-level
write queue unexpectedly not empty while crafting a zero-window probe,
hitting a warning:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 188 at net/mptcp/protocol.c:1312 mptcp_sendmsg_frag+0xc06/0xe70
Modules linked in:
CPU: 0 PID: 188 Comm: kworker/0:2 Not tainted 6.6.0-rc2-g1176aa719d7a #47
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Workqueue: events mptcp_worker
RIP: 0010:mptcp_sendmsg_frag+0xc06/0xe70 net/mptcp/protocol.c:1312
RAX: 47d0530de347ff6a RBX: 47d0530de347ff6b RCX: ffff8881015d3c00
RDX: ffff8881015d3c00 RSI: 47d0530de347ff6b RDI: 47d0530de347ff6b
RBP: 47d0530de347ff6b R08: ffffffff8243c6a8 R09: ffffffff82042d9c
R10: 0000000000000002 R11: ffffffff82056850 R12: ffff88812a13d580
R13: 0000000000000001 R14: ffff88812b375e50 R15: ffff88812bbf3200
FS:  0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000695118 CR3: 0000000115dfc001 CR4: 0000000000170ef0
Call Trace:
 <TASK>
 __subflow_push_pending+0xa4/0x420 net/mptcp/protocol.c:1545
 __mptcp_push_pending+0x128/0x3b0 net/mptcp/protocol.c:1614
 mptcp_release_cb+0x218/0x5b0 net/mptcp/protocol.c:3391
 release_sock+0xf6/0x100 net/core/sock.c:3521
 mptcp_worker+0x6e8/0x8f0 net/mptcp/protocol.c:2746
 process_scheduled_works+0x341/0x690 kernel/workqueue.c:2630
 worker_thread+0x3a7/0x610 kernel/workqueue.c:2784
 kthread+0x143/0x180 kernel/kthread.c:388
 ret_from_fork+0x4d/0x60 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:304
 </TASK>

The root cause of the issue is that expectations are wrong: e.g. due
to MPTCP-level re-injection we can hit the critical condition.

Explicitly avoid the zero-window probe when the subflow write queue
is not empty and drop the related warnings.

Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/444
Fixes: f70cad1085d1 ("mptcp: stop relying on tcp_tx_skb_cache")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-3-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: check mptcp-level constraints for backlog coalescing

commit 6db8a37dfc541e059851652cfd4f0bb13b8ff6af upstream.

The MPTCP protocol can acquire the subflow-level socket lock and
cause the tcp backlog usage. When inserting new skbs into the
backlog, the stack will try to coalesce them.

Currently, we have no check in place to ensure that such coalescing
will respect the MPTCP-level DSS, and that may cause data stream
corruption, as reported by Christoph.

Address the issue by adding the relevant admission check for coalescing
in tcp_add_backlog().

Note the issue is not easy to reproduce, as the MPTCP protocol tries
hard to avoid acquiring the subflow-level socket lock.

Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/420
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-2-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit,io_uring: io_uring openat triggers audit reference count underflow

commit 03adc61edad49e1bbecfb53f7ea5d78f398fe368 upstream.

An io_uring openat operation can update an audit reference count
from multiple threads resulting in the call trace below.

A call to io_uring_submit() with a single openat op with a flag of
IOSQE_ASYNC results in the following reference count updates.

These first part of the system call performs two increments that do not race.

do_syscall_64()
  __do_sys_io_uring_enter()
    io_submit_sqes()
      io_openat_prep()
        __io_openat_prep()
          getname()
            getname_flags()       /* update 1 (increment) */
              __audit_getname()   /* update 2 (increment) */

The openat op is queued to an io_uring worker thread which starts the
opportunity for a race.  The system call exit performs one decrement.

do_syscall_64()
  syscall_exit_to_user_mode()
    syscall_exit_to_user_mode_prepare()
      __audit_syscall_exit()
        audit_reset_context()
           putname()              /* update 3 (decrement) */

The io_uring worker thread performs one increment and two decrements.
These updates can race with the system call decrement.

io_wqe_worker()
  io_worker_handle_work()
    io_wq_submit_work()
      io_issue_sqe()
        io_openat()
          io_openat2()
            do_filp_open()
              path_openat()
                __audit_inode()   /* update 4 (increment) */
            putname()             /* update 5 (decrement) */
        __audit_uring_exit()
          audit_reset_context()
            putname()             /* update 6 (decrement) */

The fix is to change the refcnt member of struct audit_names
from int to atomic_t.

kernel BUG at fs/namei.c:262!
Call Trace:
...
 ? putname+0x68/0x70
 audit_reset_context.part.0.constprop.0+0xe1/0x300
 __audit_uring_exit+0xda/0x1c0
 io_issue_sqe+0x1f3/0x450
 ? lock_timer_base+0x3b/0xd0
 io_wq_submit_work+0x8d/0x2b0
 ? __try_to_del_timer_sync+0x67/0xa0
 io_worker_handle_work+0x17c/0x2b0
 io_wqe_worker+0x10a/0x350

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/MW2PR2101MB1033FFF044A258F84AEAA584F1C9A@MW2PR2101MB1033.namprd21.prod.outlook.com/
Fixes: 5bd2182d58e9 ("audit,io_uring,io-wq: add some basic audit support to io_uring")
Signed-off-by: Dan Clash <daclash@linux.microsoft.com>
Link: https://lore.kernel.org/r/20231012215518.GA4048@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: KVM: SVM: refresh AVIC inhibition in svm_leave_nested()

commit 3fdc6087df3be73a212a81ce5dd6516638568806 upstream.

svm_leave_nested() similar to a nested VM exit, get the vCPU out of nested
mode and thus should end the local inhibition of AVIC on this vCPU.

Failure to do so, can lead to hangs on guest reboot.

Raise the KVM_REQ_APICV_UPDATE request to refresh the AVIC state of the
current vCPU in this case.

Fixes: f44509f849fe ("KVM: x86: SVM: allow AVIC to co-exist with a nested guest running")
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928173354.217464-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: KVM: SVM: add support for Invalid IPI Vector interception

commit 2dcf37abf9d3aab7f975002d29fc7c17272def38 upstream.

In later revisions of AMD's APM, there is a new 'incomplete IPI' exit code:

"Invalid IPI Vector - The vector for the specified IPI was set to an
illegal value (VEC < 16)"

Note that tests on Zen2 machine show that this VM exit doesn't happen and
instead AVIC just does nothing.

Add support for this exit code by doing nothing, instead of filling
the kernel log with errors.

Also replace an unthrottled 'pr_err()' if another unknown incomplete
IPI exit happens with vcpu_unimpl()

(e.g in case AMD adds yet another 'Invalid IPI' exit reason)

Cc: <stable@vger.kernel.org>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928173354.217464-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Constrain guest-supported xfeatures only at KVM_GET_XSAVE{2}

commit 8647c52e9504c99752a39f1d44f6268f82c40a5c upstream.

Mask off xfeatures that aren't exposed to the guest only when saving guest
state via KVM_GET_XSAVE{2} instead of modifying user_xfeatures directly.
Preserving the maximal set of xfeatures in user_xfeatures restores KVM's
ABI for KVM_SET_XSAVE, which prior to commit ad856280ddea ("x86/kvm/fpu:
Limit guest user_xfeatures to supported bits of XCR0") allowed userspace
to load xfeatures that are supported by the host, irrespective of what
xfeatures are exposed to the guest.

There is no known use case where userspace *intentionally* loads xfeatures
that aren't exposed to the guest, but the bug fixed by commit ad856280ddea
was specifically that KVM_GET_SAVE{2} would save xfeatures that weren't
exposed to the guest, e.g. would lead to userspace unintentionally loading
guest-unsupported xfeatures when live migrating a VM.

Restricting KVM_SET_XSAVE to guest-supported xfeatures is especially
problematic for QEMU-based setups, as QEMU has a bug where instead of
terminating the VM if KVM_SET_XSAVE fails, QEMU instead simply stops
loading guest state, i.e. resumes the guest after live migration with
incomplete guest state, and ultimately results in guest data corruption.

Note, letting userspace restore all host-supported xfeatures does not fix
setups where a VM is migrated from a host *without* commit ad856280ddea,
to a target with a subset of host-supported xfeatures.  However there is
no way to safely address that scenario, e.g. KVM could silently drop the
unsupported features, but that would be a clear violation of KVM's ABI and
so would require userspace to opt-in, at which point userspace could
simply be updated to sanitize the to-be-loaded XSAVE state.

Reported-by: Tyler Stachecki <stachecki.tyler@gmail.com>
Closes: https://lore.kernel.org/all/20230914010003.358162-1-tstachecki@bloomberg.net
Fixes: ad856280ddea ("x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0")
Cc: stable@vger.kernel.org
Cc: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Message-Id: <20230928001956.924301-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Allow caller to constrain xfeatures when copying to uabi buffer

commit 18164f66e6c59fda15c198b371fa008431efdb22 upstream.

Plumb an xfeatures mask into __copy_xstate_to_uabi_buf() so that KVM can
constrain which xfeatures are saved into the userspace buffer without
having to modify the user_xfeatures field in KVM's guest_fpu state.

KVM's ABI for KVM_GET_XSAVE{2} is that features that are not exposed to
guest must not show up in the effective xstate_bv field of the buffer.
Saving only the guest-supported xfeatures allows userspace to load the
saved state on a different host with a fewer xfeatures, so long as the
target host supports the xfeatures that are exposed to the guest.

KVM currently sets user_xfeatures directly to restrict KVM_GET_XSAVE{2} to
the set of guest-supported xfeatures, but doing so broke KVM's historical
ABI for KVM_SET_XSAVE, which allows userspace to load any xfeatures that
are supported by the *host*.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928001956.924301-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sev: Check for user-space IOIO pointing to kernel space

Upstream commit: 63e44bc52047f182601e7817da969a105aa1f721

Check the memory operand of INS/OUTS before emulating the instruction.
The #VC exception can get raised from user-space, but the memory operand
can be manipulated to access kernel memory before the emulation actually
begins and after the exception handler has run.

  [ bp: Massage commit message. ]

Fixes: 597cfe48212a ("x86/boot/compressed/64: Setup a GHCB-based VC Exception handler")
Reported-by: Tom Dohrmann <erbse.13@gmx.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sev: Check IOBM for IOIO exceptions from user-space

Upstream commit: b9cb9c45583b911e0db71d09caa6b56469eb2bdf

Check the IO permission bitmap (if present) before emulating IOIO #VC
exceptions for user-space. These permissions are checked by hardware
already before the #VC is raised, but due to the VC-handler decoding
race it needs to be checked again in software.

Fixes: 25189d08e516 ("x86/sev-es: Add support for handling IOIO exceptions")
Reported-by: Tom Dohrmann <erbse.13@gmx.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Tom Dohrmann <erbse.13@gmx.de>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sev: Disable MMIO emulation from user mode

Upstream commit: a37cd2a59d0cb270b1bba568fd3a3b8668b9d3ba

A virt scenario can be constructed where MMIO memory can be user memory.
When that happens, a race condition opens between when the hardware
raises the #VC and when the #VC handler gets to emulate the instruction.

If the MOVS is replaced with a MOVS accessing kernel memory in that
small race window, then write to kernel memory happens as the access
checks are not done at emulation time.

Disable MMIO emulation in user mode temporarily until a sensible use
case appears and justifies properly handling the race window.

Fixes: 0118b604c2c9 ("x86/sev-es: Handle MMIO String Instructions")
Reported-by: Tom Dohrmann <erbse.13@gmx.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Tom Dohrmann <erbse.13@gmx.de>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Mask LVTPC when handling a PMI

commit a16eb25b09c02a54c1c1b449d4b6cfa2cf3f013a upstream.

Per the SDM, "When the local APIC handles a performance-monitoring
counters interrupt, it automatically sets the mask flag in the LVT
performance counter register."  Add this behavior to KVM's local APIC
emulation.

Failure to mask the LVTPC entry results in spurious PMIs, e.g. when
running Linux as a guest, PMI handlers that do a "late_ack" spew a large
number of "dazed and confused" spurious NMI warnings.

Fixes: f5132b01386b ("KVM: Expose a version 2 architectural PMU to a guests")
Cc: stable@vger.kernel.org
Signed-off-by: Jim Mattson <jmattson@google.com>
Tested-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230925173448.3518223-3-mizhang@google.com
[sean: massage changelog, correct Fixes]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regmap: fix NULL deref on lookup

commit c6df843348d6b71ea986266c12831cb60c2cf325 upstream.

Not all regmaps have a name so make sure to check for that to avoid
dereferencing a NULL pointer when dev_get_regmap() is used to lookup a
named regmap.

Fixes: e84861fec32d ("regmap: dev_get_regmap_match(): fix string comparison")
Cc: stable@vger.kernel.org # 5.8
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231006082104.16707-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: nci: fix possible NULL pointer dereference in send_acknowledge()

commit 7937609cd387246aed994e81aa4fa951358fba41 upstream.

Handle memory allocation failure from nci_skb_alloc() (calling
alloc_skb()) to avoid possible NULL pointer dereference.

Reported-by: 黄思聪 <huangsicong@iie.ac.cn>
Fixes: 391d8a2da787 ("NFC: Add NCI over SPI receive")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231013184129.18738-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix stripe length calculation for non-zoned data chunk allocation

commit 8a540e990d7da36813cb71a4a422712bfba448a4 upstream.

Commit f6fca3917b4d "btrfs: store chunk size in space-info struct"
broke data chunk allocations on non-zoned multi-device filesystems when
using default chunk_size.  Commit 5da431b71d4b "btrfs: fix the max chunk
size and stripe length calculation" partially fixed that, and this patch
completes the fix for that case.

After commit f6fca3917b4d and 5da431b71d4b, the sequence of events for
a data chunk allocation on a non-zoned filesystem is:

        1.  btrfs_create_chunk calls init_alloc_chunk_ctl, which copies
        space_info->chunk_size (default 10 GiB) to ctl->max_stripe_len
        unmodified.  Before f6fca3917b4d, ctl->max_stripe_len value was
        1 GiB for non-zoned data chunks and not configurable.

        2.  btrfs_create_chunk calls gather_device_info which consumes
        and produces more fields of chunk_ctl.

        3.  gather_device_info multiplies ctl->max_stripe_len by
        ctl->dev_stripes (which is 1 in all cases except dup)
        and calls find_free_dev_extent with that number as num_bytes.

        4.  find_free_dev_extent locates the first dev_extent hole on
        a device which is at least as large as num_bytes.  With default
        max_chunk_size from f6fca3917b4d, it finds the first hole which is
        longer than 10 GiB, or the largest hole if that hole is shorter
        than 10 GiB.  This is different from the pre-f6fca3917b4d
        behavior, where num_bytes is 1 GiB, and find_free_dev_extent
        may choose a different hole.

        5.  gather_device_info repeats step 4 with all devices to find
        the first or largest dev_extent hole that can be allocated on
        each device.

        6.  gather_device_info sorts the device list by the hole size
        on each device, using total unallocated space on each device to
        break ties, then returns to btrfs_create_chunk with the list.

        7.  btrfs_create_chunk calls decide_stripe_size_regular.

        8.  decide_stripe_size_regular finds the largest stripe_len that
        fits across the first nr_devs device dev_extent holes that were
        found by gather_device_info (and satisfies other constraints
        on stripe_len that are not relevant here).

        9.  decide_stripe_size_regular caps the length of the stripe it
        computed at 1 GiB.  This cap appeared in 5da431b71d4b to correct
        one of the other regressions introduced in f6fca3917b4d.

        10.  btrfs_create_chunk creates a new chunk with the above
        computed size and number of devices.

At step 4, gather_device_info() has found a location where stripe up to
10 GiB in length could be allocated on several devices, and selected
which devices should have a dev_extent allocated on them, but at step
9, only 1 GiB of the space that was found on each device can be used.
This mismatch causes new suboptimal chunk allocation cases that did not
occur in pre-f6fca3917b4d kernels.

Consider a filesystem using raid1 profile with 3 devices.  After some
balances, device 1 has 10x 1 GiB unallocated space, while devices 2
and 3 have 1x 10 GiB unallocated space, i.e. the same total amount of
space, but distributed across different numbers of dev_extent holes.
For visualization, let's ignore all the chunks that were allocated before
this point, and focus on the remaining holes:

        Device 1:  [_] [_] [_] [_] [_] [_] [_] [_] [_] [_] (10x 1 GiB unallocated)
        Device 2:  [__________] (10 GiB contig unallocated)
        Device 3:  [__________] (10 GiB contig unallocated)

Before f6fca3917b4d, the allocator would fill these optimally by
allocating chunks with dev_extents on devices 1 and 2 ([12]), 1 and 3
([13]), or 2 and 3 ([23]):

        [after 0 chunk allocations]
        Device 1:  [_] [_] [_] [_] [_] [_] [_] [_] [_] [_] (10 GiB)
        Device 2:  [__________] (10 GiB)
        Device 3:  [__________] (10 GiB)

        [after 1 chunk allocation]
        Device 1:  [12] [_] [_] [_] [_] [_] [_] [_] [_] [_]
        Device 2:  [12] [_________] (9 GiB)
        Device 3:  [__________] (10 GiB)

        [after 2 chunk allocations]
        Device 1:  [12] [13] [_] [_] [_] [_] [_] [_] [_] [_] (8 GiB)
        Device 2:  [12] [_________] (9 GiB)
        Device 3:  [13] [_________] (9 GiB)

        [after 3 chunk allocations]
        Device 1:  [12] [13] [12] [_] [_] [_] [_] [_] [_] [_] (7 GiB)
        Device 2:  [12] [12] [________] (8 GiB)
        Device 3:  [13] [_________] (9 GiB)

        [...]

        [after 12 chunk allocations]
        Device 1:  [12] [13] [12] [13] [12] [13] [12] [13] [_] [_] (2 GiB)
        Device 2:  [12] [12] [23] [23] [12] [12] [23] [23] [__] (2 GiB)
        Device 3:  [13] [13] [23] [23] [13] [23] [13] [23] [__] (2 GiB)

        [after 13 chunk allocations]
        Device 1:  [12] [13] [12] [13] [12] [13] [12] [13] [12] [_] (1 GiB)
        Device 2:  [12] [12] [23] [23] [12] [12] [23] [23] [12] [_] (1 GiB)
        Device 3:  [13] [13] [23] [23] [13] [23] [13] [23] [__] (2 GiB)

        [after 14 chunk allocations]
        Device 1:  [12] [13] [12] [13] [12] [13] [12] [13] [12] [13] (full)
        Device 2:  [12] [12] [23] [23] [12] [12] [23] [23] [12] [_] (1 GiB)
        Device 3:  [13] [13] [23] [23] [13] [23] [13] [23] [13] [_] (1 GiB)

        [after 15 chunk allocations]
        Device 1:  [12] [13] [12] [13] [12] [13] [12] [13] [12] [13] (full)
        Device 2:  [12] [12] [23] [23] [12] [12] [23] [23] [12] [23] (full)
        Device 3:  [13] [13] [23] [23] [13] [23] [13] [23] [13] [23] (full)

This allocates all of the space with no waste.  The sorting function used
by gather_device_info considers free space holes above 1 GiB in length
to be equal to 1 GiB, so once find_free_dev_extent locates a sufficiently
long hole on each device, all the holes appear equal in the sort, and the
comparison falls back to sorting devices by total free space.  This keeps
usable space on each device equal so they can all be filled completely.

After f6fca3917b4d, the allocator prefers the devices with larger holes
over the devices with more free space, so it makes bad allocation choices:

        [after 1 chunk allocation]
        Device 1:  [_] [_] [_] [_] [_] [_] [_] [_] [_] [_] (10 GiB)
        Device 2:  [23] [_________] (9 GiB)
        Device 3:  [23] [_________] (9 GiB)

        [after 2 chunk allocations]
        Device 1:  [_] [_] [_] [_] [_] [_] [_] [_] [_] [_] (10 GiB)
        Device 2:  [23] [23] [________] (8 GiB)
        Device 3:  [23] [23] [________] (8 GiB)

        [after 3 chunk allocations]
        Device 1:  [_] [_] [_] [_] [_] [_] [_] [_] [_] [_] (10 GiB)
        Device 2:  [23] [23] [23] [_______] (7 GiB)
        Device 3:  [23] [23] [23] [_______] (7 GiB)

        [...]

        [after 9 chunk allocations]
        Device 1:  [_] [_] [_] [_] [_] [_] [_] [_] [_] [_] (10 GiB)
        Device 2:  [23] [23] [23] [23] [23] [23] [23] [23] [23] [_] (1 GiB)
        Device 3:  [23] [23] [23] [23] [23] [23] [23] [23] [23] [_] (1 GiB)

        [after 10 chunk allocations]
        Device 1:  [12] [_] [_] [_] [_] [_] [_] [_] [_] [_] (9 GiB)
        Device 2:  [23] [23] [23] [23] [23] [23] [23] [23] [12] (full)
        Device 3:  [23] [23] [23] [23] [23] [23] [23] [23] [_] (1 GiB)

        [after 11 chunk allocations]
        Device 1:  [12] [13] [_] [_] [_] [_] [_] [_] [_] [_] (8 GiB)
        Device 2:  [23] [23] [23] [23] [23] [23] [23] [23] [12] (full)
        Device 3:  [23] [23] [23] [23] [23] [23] [23] [23] [13] (full)

No further allocations are possible, with 8 GiB wasted (4 GiB of data
space).  The sort in gather_device_info now considers free space in
holes longer than 1 GiB to be distinct, so it will prefer devices 2 and
3 over device 1 until all but 1 GiB is allocated on devices 2 and 3.
At that point, with only 1 GiB unallocated on every device, the largest
hole length on each device is equal at 1 GiB, so the sort finally moves
to ordering the devices with the most free space, but by this time it
is too late to make use of the free space on device 1.

Note that it's possible to contrive a case where the pre-f6fca3917b4d
allocator fails the same way, but these cases generally have extensive
dev_extent fragmentation as a precondition (e.g. many holes of 768M
in length on one device, and few holes 1 GiB in length on the others).
With the regression in f6fca3917b4d, bad chunk allocation can occur even
under optimal conditions, when all dev_extent holes are exact multiples
of stripe_len in length, as in the example above.

Also note that post-f6fca3917b4d kernels do treat dev_extent holes
larger than 10 GiB as equal, so the bad behavior won't show up on a
freshly formatted filesystem; however, as the filesystem ages and fills
up, and holes ranging from 1 GiB to 10 GiB in size appear, the problem
can show up as a failure to balance after adding or removing devices,
or an unexpected shortfall in available space due to unequal allocation.

To fix the regression and make data chunk allocation work
again, set ctl->max_stripe_len back to the original SZ_1G, or
space_info->chunk_size if that's smaller (the latter can happen if the
user set space_info->chunk_size to less than 1 GiB via sysfs, or it's
a 32 MiB system chunk with a hardcoded chunk_size and stripe_len).

While researching the background of the earlier commits, I found that an
identical fix was already proposed at:

  https://lore.kernel.org/linux-btrfs/de83ac46-a4a3-88d3-85ce-255b7abc5249@gmx.com/

The previous review missed one detail:  ctl->max_stripe_len is used
before decide_stripe_size_regular() is called, when it is too late for
the changes in that function to have any effect.  ctl->max_stripe_len is
not used directly by decide_stripe_size_regular(), but the parameter
does heavily influence the per-device free space data presented to
the function.

Fixes: f6fca3917b4d ("btrfs: store chunk size in space-info struct")
CC: stable@vger.kernel.org # 6.1+
Link: https://lore.kernel.org/linux-btrfs/20231007051421.19657-1-ce3g8jdj@umail.furryterror.org/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/smc: return the right falback reason when prefix checks fail

commit 4abbd2e3c1db671fa1286390f1310aec78386f1d upstream.

In the smc_listen_work(), if smc_listen_prfx_check() failed,
the real reason: SMC_CLC_DECL_DIFFPREFIX was dropped, and
SMC_CLC_DECL_NOSMCDEV was returned.

Althrough this is also kind of SMC_CLC_DECL_NOSMCDEV, but return
the real reason is much friendly for debugging.

Fixes: e49300a6bf62 ("net/smc: add listen processing for SMC-Rv2")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/20231012123729.29307-1-dust.li@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ice: reset first in crash dump kernels

commit 0288c3e709e5fabd51e84715c5c798a02f43061a upstream.

When the system boots into the crash dump kernel after a panic, the ice
networking device may still have pending transactions that can cause errors
or machine checks when the device is re-enabled. This can prevent the crash
dump kernel from loading the driver or collecting the crash data.

To avoid this issue, perform a function level reset (FLR) on the ice device
via PCIe config space before enabling it on the crash kernel. This will
clear any outstanding transactions and stop all queues and interrupts.
Restore the config space after the FLR, otherwise it was found in testing
that the driver wouldn't load successfully.

The following sequence causes the original issue:
- Load the ice driver with modprobe ice
- Enable SR-IOV with 2 VFs: echo 2 > /sys/class/net/eth0/device/sriov_num_vfs
- Trigger a crash with echo c > /proc/sysrq-trigger
- Load the ice driver again (or let it load automatically) with modprobe ice
- The system crashes again during pcim_enable_device()

Fixes: 837f08fdecbe ("ice: Add basic driver framework for Intel(R) E800 Series")
Reported-by: Vishal Agrawal <vagrawal@redhat.com>
Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Link: https://lore.kernel.org/r/20231011233334.336092-3-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ice: fix over-shifted variable

commit 242e34500a32631f85c2b4eb6cb42a368a39e54f upstream.

Since the introduction of the ice driver the code has been
double-shifting the RSS enabling field, because the define already has
shifts in it and can't have the regular pattern of "a << shiftval &
mask" applied.

Most places in the code got it right, but one line was still wrong. Fix
this one location for easy backports to stable. An in-progress patch
fixes the defines to "standard" and will be applied as part of the
regular -next process sometime after this one.

Fixes: d76a60ba7afb ("ice: Add support for VLANs and offloads")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
CC: stable@vger.kernel.org
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231010203101.406248-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: avoid memcmp() out of bounds warning

commit 9d1a3c74746428102d55371fbf74b484733937d9 upstream.

bacmp() is a wrapper around memcpy(), which contain compile-time
checks for buffer overflow. Since the hci_conn_request_evt() also calls
bt_dev_dbg() with an implicit NULL pointer check, the compiler is now
aware of a case where 'hdev' is NULL and treats this as meaning that
zero bytes are available:

In file included from net/bluetooth/hci_event.c:32:
In function 'bacmp',
    inlined from 'hci_conn_request_evt' at net/bluetooth/hci_event.c:3276:7:
include/net/bluetooth/bluetooth.h:364:16: error: 'memcmp' specified bound 6 exceeds source size 0 [-Werror=stringop-overread]
  364 |         return memcmp(ba1, ba2, sizeof(bdaddr_t));
      |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Add another NULL pointer check before the bacmp() to ensure the compiler
understands the code flow enough to not warn about it.  Since the patch
that introduced the warning is marked for stable backports, this one
should also go that way to avoid introducing build regressions.

Fixes: 1ffc6f8cc332 ("Bluetooth: Reject connection with the device which has same BD_ADDR")
Cc: Kees Cook <keescook@chromium.org>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: hci_event: Fix coding style

commit 35d91d95a0cd61ebb90e0246dc917fd25e519b8c upstream.

This fixes the following code style problem:

ERROR: that open brace { should be on the previous line
+ if (!bacmp(&hdev->bdaddr, &ev->bdaddr))
+ {

Fixes: 1ffc6f8cc332 ("Bluetooth: Reject connection with the device which has same BD_ADDR")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: vhci: Fix race when opening vhci device

commit 92d4abd66f7080075793970fc8f241239e58a9e7 upstream.

When the vhci device is opened in the two-step way, i.e.: open device
then write a vendor packet with requested controller type, the device
shall respond with a vendor packet which includes HCI index of created
interface.

When the virtual HCI is created, the host sends a reset request to the
controller. This request is processed by the vhci_send_frame() function.
However, this request is send by a different thread, so it might happen
that this HCI request will be received before the vendor response is
queued in the read queue. This results in the HCI vendor response and
HCI reset request inversion in the read queue which leads to improper
behavior of btvirt:

> dmesg
[1754256.640122] Bluetooth: MGMT ver 1.22
[1754263.023806] Bluetooth: MGMT ver 1.22
[1754265.043775] Bluetooth: hci1: Opcode 0x c03 failed: -110

In order to synchronize vhci two-step open/setup process with virtual
HCI initialization, this patch adds internal lock when queuing data in
the vhci_send_frame() function.

Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix a refcnt underflow problem for hci_conn

commit c7f59461f5a78994613afc112cdd73688aef9076 upstream.

Syzbot reports a warning as follows:

WARNING: CPU: 1 PID: 26946 at net/bluetooth/hci_conn.c:619
hci_conn_timeout+0x122/0x210 net/bluetooth/hci_conn.c:619
...
Call Trace:
 <TASK>
 process_one_work+0x884/0x15c0 kernel/workqueue.c:2630
 process_scheduled_works kernel/workqueue.c:2703 [inline]
 worker_thread+0x8b9/0x1290 kernel/workqueue.c:2784
 kthread+0x33c/0x440 kernel/kthread.c:388
 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
 </TASK>

It is because the HCI_EV_SIMPLE_PAIR_COMPLETE event handler drops
hci_conn directly without check Simple Pairing whether be enabled. But
the Simple Pairing process can only be used if both sides have the
support enabled in the host stack.

Add hci_conn_ssp_enabled() for hci_conn in HCI_EV_IO_CAPA_REQUEST and
HCI_EV_SIMPLE_PAIR_COMPLETE event handlers to fix the problem.

Fixes: 0493684ed239 ("[Bluetooth] Disable disconnect timer during Simple Pairing")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Reject connection with the device which has same BD_ADDR

commit 1ffc6f8cc33268731fcf9629fc4438f6db1191fc upstream.

This change is used to relieve CVE-2020-26555. The description of
the CVE:

Bluetooth legacy BR/EDR PIN code pairing in Bluetooth Core Specification
1.0B through 5.2 may permit an unauthenticated nearby device to spoof
the BD_ADDR of the peer device to complete pairing without knowledge
of the PIN. [1]

The detail of this attack is in IEEE paper:
BlueMirror: Reflections on Bluetooth Pairing and Provisioning Protocols
[2]

It's a reflection attack. The paper mentioned that attacker can induce
the attacked target to generate null link key (zero key) without PIN
code. In BR/EDR, the key generation is actually handled in the controller
which is below HCI.

A condition of this attack is that attacker should change the
BR_ADDR of his hacking device (Host B) to equal to the BR_ADDR with
the target device being attacked (Host A).

Thus, we reject the connection with device which has same BD_ADDR
both on HCI_Create_Connection and HCI_Connection_Request to prevent
the attack. A similar implementation also shows in btstack project.
[3][4]

Cc: stable@vger.kernel.org
Link: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-26555
Link: https://ieeexplore.ieee.org/abstract/document/9474325/authors#authors
Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L3523
Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L7297
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: hci_event: Ignore NULL link key

commit 33155c4aae5260475def6f7438e4e35564f4f3ba upstream.

This change is used to relieve CVE-2020-26555. The description of the
CVE:

Bluetooth legacy BR/EDR PIN code pairing in Bluetooth Core Specification
1.0B through 5.2 may permit an unauthenticated nearby device to spoof
the BD_ADDR of the peer device to complete pairing without knowledge
of the PIN. [1]

The detail of this attack is in IEEE paper:
BlueMirror: Reflections on Bluetooth Pairing and Provisioning Protocols
[2]

It's a reflection attack. The paper mentioned that attacker can induce
the attacked target to generate null link key (zero key) without PIN
code. In BR/EDR, the key generation is actually handled in the controller
which is below HCI.

Thus, we can ignore null link key in the handler of "Link Key Notification
event" to relieve the attack. A similar implementation also shows in
btstack project. [3]

v3: Drop the connection when null link key be detected.

v2:
- Used Link: tag instead of Closes:
- Used bt_dev_dbg instead of BT_DBG
- Added Fixes: tag

Cc: stable@vger.kernel.org
Fixes: 55ed8ca10f35 ("Bluetooth: Implement link key handling for the management interface")
Link: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-26555
Link: https://ieeexplore.ieee.org/abstract/document/9474325/authors#authors
Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L3722
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igc: Fix race condition in PTP tx code

commit 9c50e2b150c8ee0eee5f8154e2ad168cdd748877 upstream.

Currently, the igc driver supports timestamping only one tx packet at a
time. During the transmission flow, the skb that requires hardware
timestamping is saved in adapter->ptp_tx_skb. Once hardware has the
timestamp, an interrupt is delivered, and adapter->ptp_tx_work is
scheduled. In igc_ptp_tx_work(), we read the timestamp register, update
adapter->ptp_tx_skb, and notify the network stack.

While the thread executing the transmission flow (the user process
running in kernel mode) and the thread executing ptp_tx_work don't
access adapter->ptp_tx_skb concurrently, there are two other places
where adapter->ptp_tx_skb is accessed: igc_ptp_tx_hang() and
igc_ptp_suspend().

igc_ptp_tx_hang() is executed by the adapter->watchdog_task worker
thread which runs periodically so it is possible we have two threads
accessing ptp_tx_skb at the same time. Consider the following scenario:
right after __IGC_PTP_TX_IN_PROGRESS is set in igc_xmit_frame_ring(),
igc_ptp_tx_hang() is executed. Since adapter->ptp_tx_start hasn't been
written yet, this is considered a timeout and adapter->ptp_tx_skb is
cleaned up.

This patch fixes the issue described above by adding the ptp_tx_lock to
protect access to ptp_tx_skb and ptp_tx_start fields from igc_adapter.
Since igc_xmit_frame_ring() called in atomic context by the networking
stack, ptp_tx_lock is defined as a spinlock, and the irq safe variants
of lock/unlock are used.

With the introduction of the ptp_tx_lock, the __IGC_PTP_TX_IN_PROGRESS
flag doesn't provide much of a use anymore so this patch gets rid of it.

Fixes: 2c344ae24501 ("igc: Add support for TX timestamping")
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igc: Add condition for qbv_config_change_errors counter

commit ed89b74d2dc920cb61d3094e0e97ec8775b13086 upstream.

Add condition to increase the qbv counter during taprio qbv
configuration only.

There might be a case when TC already been setup then user configure
the ETF/CBS qdisc and this counter will increase if no condition above.

Fixes: ae4fe4698300 ("igc: Add qbv_config_change_errors counter")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igc: Add qbv_config_change_errors counter

commit ae4fe46983007bc46d87dcb284a5e5851c3e1c84 upstream.

Add ConfigChangeError(qbv_config_change_errors) when user try to set the
AdminBaseTime to past value while the current GCL is still running.

The ConfigChangeError counter should not be increased when a gate control
list is scheduled into the future.

User can use "ethtool -S <interface> | grep qbv_config_change_errors"
command to check the counter values.

Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igc: Remove reset adapter task for i226 during disable tsn config

commit 1d1b4c63ba739c6ca695cb2ea13fefa9dfbff60d upstream.

I225 have limitation when programming the BaseTime register which required
a power cycle of the controller. This limitation already lifted in I226.
This patch removes the restriction so that when user configure/remove any
TSN mode, it would not go into power cycle reset adapter.

How to test:

Schedule any gate control list configuration or delete it.

Example:

1)

BASE_TIME=$(date +%s%N)
tc qdisc replace dev $interface_name parent root handle 100 taprio \
    num_tc 4 \
    map 3 1 0 2 3 3 3 3 3 3 3 3 3 3 3 3 \
    queues 1@0 1@1 1@2 1@3 \
    base-time $BASE_TIME \
    sched-entry S 0F 1000000 \
    flags 0x2

2) tc qdisc del dev $intername_name root

Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igc: enable Qbv configuration for 2nd GCL

commit 5ac1231ac14d1b8a1098048e51cad45f11b85c0a upstream.

Make reset task only executes for i225 and Qbv disabling to allow
i226 configure for 2nd GCL without resetting the adapter.

In i226, Tx won't hang if there is a GCL is already running, so in
this case we don't need to set FutScdDis bit.

Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igc: remove I226 Qbv BaseTime restriction

commit b8897dc54e3bc9d25281bbb42a7d730782ff4588 upstream.

Remove the Qbv BaseTime restriction for I226 so that the BaseTime can be
scheduled to the future time. A new register bit of Tx Qav Control
(Bit-7: FutScdDis) was introduced to allow I226 scheduling future time as
Qbv BaseTime and not having the Tx hang timeout issue.

Besides, according to datasheet section 7.5.2.9.3.3, FutScdDis bit has to
be configured first before the cycle time and base time.

Indeed the FutScdDis bit is only active on re-configuration, thus we have
to set the BASET_L to zero and then only set it to the desired value.

Please also note that the Qbv configuration flow is moved around based on
the Qbv programming guideline that is documented in the latest datasheet.

Co-developed-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib/Kconfig.debug: do not enable DEBUG_PREEMPT by default

commit cc6003916ed46d7a67d91ee32de0f9138047d55f upstream.

In workloads where this_cpu operations are frequently performed,
enabling DEBUG_PREEMPT may result in significant increase in
runtime overhead due to frequent invocation of
__this_cpu_preempt_check() function.

This can be demonstrated through benchmarks such as hackbench where this
configuration results in a 10% reduction in performance, primarily due to
the added overhead within memcg charging path.

Therefore, do not to enable DEBUG_PREEMPT by default and make users aware
of its potential impact on performance in some workloads.

hackbench-process-sockets
      debug_preempt  no_debug_preempt
Amean     1       0.4743 (   0.00%)      0.4295 *   9.45%*
Amean     4       1.4191 (   0.00%)      1.2650 *  10.86%*
Amean     7       2.2677 (   0.00%)      2.0094 *  11.39%*
Amean     12      3.6821 (   0.00%)      3.2115 *  12.78%*
Amean     21      6.6752 (   0.00%)      5.7956 *  13.18%*
Amean     30      9.6646 (   0.00%)      8.5197 *  11.85%*
Amean     48     15.3363 (   0.00%)     13.5559 *  11.61%*
Amean     79     24.8603 (   0.00%)     22.0597 *  11.27%*
Amean     96     30.1240 (   0.00%)     26.8073 *  11.01%*

Link: https://lkml.kernel.org/r/20230121033942.350387-1-42.hyeyoo@gmail.com
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ben Segall <bsegall@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Luiz Capitulino <luizcap@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.1.59

Link: https://lore.kernel.org/r/20231016084000.050926073@linuxfoundation.org
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Fixed two speaker platform

commit fb6254df09bba303db2a1002085f6c0b90a456ed upstream.

If system has two speakers and one connect to 0x14 pin, use this
function will disable it.

Fixes: e43252db7e20 ("ALSA: hda/realtek - ALC287 I2S speaker platform support")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/e3f2aac3fe6a47079d728a6443358cc2@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64e: Fix wrong test in __ptep_test_and_clear_young()

[ Upstream commit 5ea0bbaa32e8f54e9a57cfee4a3b8769b80be0d2 ]

Commit 45201c879469 ("powerpc/nohash: Remove hash related code from
nohash headers.") replaced:

  if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
return 0;

By:

  if (pte_young(*ptep))
return 0;

But it should be:

  if (!pte_young(*ptep))
return 0;

Fix it.

Fixes: 45201c879469 ("powerpc/nohash: Remove hash related code from nohash headers.")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/8bb7f06494e21adada724ede47a4c3d97e879d40.1695659959.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/8xx: Fix pte_access_permitted() for PAGE_NONE

[ Upstream commit 5d9cea8a552ee122e21fbd5a3c5d4eb85f648e06 ]

On 8xx, PAGE_NONE is handled by setting _PAGE_NA instead of clearing
_PAGE_USER.

But then pte_user() returns 1 also for PAGE_NONE.

As _PAGE_NA prevent reads, add a specific version of pte_read()
that returns 0 when _PAGE_NA is set instead of always returning 1.

Fixes: 351750331fc1 ("powerpc/mm: Introduce _PAGE_NA")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/57bcfbe578e43123f9ed73e040229b80f1ad56ec.1695659959.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: mediatek: Fix deadlock caused by synchronize_irq()

[ Upstream commit 01f1ae2733e2bb4de92fefcea5fda847d92aede1 ]

The synchronize_irq(c->irq) will not return until the IRQ handler
mtk_uart_apdma_irq_handler() is completed. If the synchronize_irq()
holds a spin_lock and waits the IRQ handler to complete, but the
IRQ handler also needs the same spin_lock. The deadlock will happen.
The process is shown below:

          cpu0                        cpu1
mtk_uart_apdma_device_pause() | mtk_uart_apdma_irq_handler()
  spin_lock_irqsave()         |
                              |   spin_lock_irqsave()
  //hold the lock to wait     |
  synchronize_irq()           |

This patch reorders the synchronize_irq(c->irq) outside the spin_lock
in order to mitigate the bug.

Fixes: 9135408c3ace ("dmaengine: mediatek: Add MediaTek UART APDMA support")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Eugen Hristev <eugen.hristev@collabora.com>
Link: https://lore.kernel.org/r/20230806032511.45263-1-duoming@zju.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: use spin_lock_irqsave before wait_event_lock_irq

[ Upstream commit c0409dd3d151f661e7e57b901a81a02565df163c ]

In idxd_cmd_exec(), wait_event_lock_irq() explicitly calls
spin_unlock_irq()/spin_lock_irq(). If the interrupt is on before entering
wait_event_lock_irq(), it will become off status after
wait_event_lock_irq() is called. Later, wait_for_completion() may go to
sleep but irq is disabled. The scenario is warned in might_sleep().

Fix it by using spin_lock_irqsave() instead of the primitive spin_lock()
to save the irq status before entering wait_event_lock_irq() and using
spin_unlock_irqrestore() instead of the primitive spin_unlock() to restore
the irq status before entering wait_for_completion().

Before the change:
idxd_cmd_exec() {
interrupt is on
spin_lock()                        // interrupt is on
wait_event_lock_irq()
spin_unlock_irq()  // interrupt is enabled
...
spin_lock_irq()    // interrupt is disabled
spin_unlock()                      // interrupt is still disabled
wait_for_completion()              // report "BUG: sleeping function
   // called from invalid context...
   // in_atomic() irqs_disabled()"
}

After applying spin_lock_irqsave():
idxd_cmd_exec() {
interrupt is on
spin_lock_irqsave()                // save the on state
   // interrupt is disabled
wait_event_lock_irq()
spin_unlock_irq()  // interrupt is enabled
...
spin_lock_irq()    // interrupt is disabled
spin_unlock_irqrestore()           // interrupt is restored to on
wait_for_completion()              // No Call trace
}

Fixes: f9f4082dbc56 ("dmaengine: idxd: remove interrupt disable for cmd_lock")
Signed-off-by: Rex Zhang <rex.zhang@intel.com>
Signed-off-by: Lijun Pan <lijun.pan@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230916060619.3744220-1-rex.zhang@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/alternatives: Disable KASAN in apply_alternatives()

commit d35652a5fc9944784f6f50a5c979518ff8dacf61 upstream.

Fei has reported that KASAN triggers during apply_alternatives() on
a 5-level paging machine:

BUG: KASAN: out-of-bounds in rcu_is_watching()
Read of size 4 at addr ff110003ee6419a0 by task swapper/0/0
...
__asan_load4()
rcu_is_watching()
trace_hardirqs_on()
text_poke_early()
apply_alternatives()
...

On machines with 5-level paging, cpu_feature_enabled(X86_FEATURE_LA57)
gets patched. It includes KASAN code, where KASAN_SHADOW_START depends on
__VIRTUAL_MASK_SHIFT, which is defined with cpu_feature_enabled().

KASAN gets confused when apply_alternatives() patches the
KASAN_SHADOW_START users. A test patch that makes KASAN_SHADOW_START
static, by replacing __VIRTUAL_MASK_SHIFT with 56, works around the issue.

Fix it for real by disabling KASAN while the kernel is patching alternatives.

[ mingo: updated the changelog ]

Fixes: 6657fca06e3f ("x86/mm: Allow to boot without LA57 if CONFIG_X86_5LEVEL=y")
Reported-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231012100424.1456-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdnsp: Fixes issue with dequeuing not queued requests

commit 34f08eb0ba6e4869bbfb682bf3d7d0494ffd2f87 upstream.

Gadget ACM while unloading module try to dequeue not queued usb
request which causes the kernel to crash.
Patch adds extra condition to check whether usb request is processed
by CDNSP driver.

cc: stable@vger.kernel.org
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20230713081429.326660-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: ncm: Handle decoding of multiple NTB's in unwrap call

commit 427694cfaafa565a3db5c5ea71df6bc095dca92f upstream.

When NCM is used with hosts like Windows PC, it is observed that there are
multiple NTB's contained in one usb request giveback. Since the driver
unwraps the obtained request data assuming only one NTB is present, we
loose the subsequent NTB's present resulting in data loss.

Fix this by checking the parsed block length with the obtained data
length in usb request and continue parsing after the last byte of current
NTB.

Cc: stable@vger.kernel.org
Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230927105858.12950-1-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc-xilinx: replace memcpy with memcpy_toio

commit 3061b6491f491197a35e14e49f805d661b02acd4 upstream.

For ARM processor, unaligned access to device memory is not allowed.
Method memcpy does not take care of alignment.

USB detection failure with the unalingned address of memory, with
below kernel crash. To fix the unalingned address kernel panic,
replace memcpy with memcpy_toio method.

Kernel crash:
Unable to handle kernel paging request at virtual address ffff80000c05008a
Mem abort info:
  ESR = 0x96000061
  EC = 0x25: DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
  FSC = 0x21: alignment fault
Data abort info:
  ISV = 0, ISS = 0x00000061
  CM = 0, WnR = 1
swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000000143b000
[ffff80000c05008a] pgd=100000087ffff003, p4d=100000087ffff003,
pud=100000087fffe003, pmd=1000000800bcc003, pte=00680000a0010713
Internal error: Oops: 96000061 [#1] SMP
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.19-xilinx-v2022.1 #1
Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __memcpy+0x30/0x260
lr : __xudc_ep0_queue+0xf0/0x110
sp : ffff800008003d00
x29: ffff800008003d00 x28: ffff800009474e80 x27: 00000000000000a0
x26: 0000000000000100 x25: 0000000000000012 x24: ffff000800bc8080
x23: 0000000000000001 x22: 0000000000000012 x21: ffff000800bc8080
x20: 0000000000000012 x19: ffff000800bc8080 x18: 0000000000000000
x17: ffff800876482000 x16: ffff800008004000 x15: 0000000000004000
x14: 00001f09785d0400 x13: 0103020101005567 x12: 0781400000000200
x11: 00000000c5672a10 x10: 00000000000008d0 x9 : ffff800009463cf0
x8 : ffff8000094757b0 x7 : 0201010055670781 x6 : 4000000002000112
x5 : ffff80000c05009a x4 : ffff000800a15012 x3 : ffff00080362ad80
x2 : 0000000000000012 x1 : ffff000800a15000 x0 : ffff80000c050088
Call trace:
 __memcpy+0x30/0x260
 xudc_ep0_queue+0x3c/0x60
 usb_ep_queue+0x38/0x44
 composite_ep0_queue.constprop.0+0x2c/0xc0
 composite_setup+0x8d0/0x185c
 configfs_composite_setup+0x74/0xb0
 xudc_irq+0x570/0xa40
 __handle_irq_event_percpu+0x58/0x170
 handle_irq_event+0x60/0x120
 handle_fasteoi_irq+0xc0/0x220
 handle_domain_irq+0x60/0x90
 gic_handle_irq+0x74/0xa0
 call_on_irq_stack+0x2c/0x60
 do_interrupt_handler+0x54/0x60
 el1_interrupt+0x30/0x50
 el1h_64_irq_handler+0x18/0x24
 el1h_64_irq+0x78/0x7c
 arch_cpu_idle+0x18/0x2c
 do_idle+0xdc/0x15c
 cpu_startup_entry+0x28/0x60
 rest_init+0xc8/0xe0
 arch_call_rest_init+0x10/0x1c
 start_kernel+0x694/0x6d4
 __primary_switched+0xa4/0xac

Fixes: 1f7c51660034 ("usb: gadget: Add xilinx usb2 device support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202209020044.CX2PfZzM-lkp@intel.com/
Cc: stable@vger.kernel.org
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20230929121514.13475-1-piyush.mehta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: Clear EVENT_PENDING bit if ucsi_send_command fails

commit a00e197daec52bcd955e118f5f57d706da5bfe50 upstream.

Currently if ucsi_send_command() fails, then we bail out without
clearing EVENT_PENDING flag. So when the next connector change
event comes, ucsi_connector_change() won't queue the con->work,
because of which none of the new events will be processed.

Fix this by clearing EVENT_PENDING flag if ucsi_send_command()
fails.

Cc: stable@vger.kernel.org # 5.16
Fixes: 512df95b9432 ("usb: typec: ucsi: Better fix for missing unplug events issue")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/1694423055-8440-1-git-send-email-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: altmodes/displayport: Signal hpd low when exiting mode

commit 89434b069e460967624903b049e5cf5c9e6b99b9 upstream.

Upon receiving an ACK for a sent EXIT_MODE message, the DisplayPort
driver currently resets the status and configuration of the port partner.
The hpd signal is not updated despite being part of the status, so the
Display stack can still transmit video despite typec_altmode_exit placing
the lanes in a Safe State.

Set hpd to low when a sent EXIT_MODE message is ACK'ed.

Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231009210057.3773877-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

counter: microchip-tcb-capture: Fix the use of internal GCLK logic

commit df8fdd01c98b99d04915c04f3a5ce73f55456b7c upstream.

As per the datasheet, the clock selection Bits 2:0 – TCCLKS[2:0] should
be set to 0 while using the internal GCLK (TIMER_CLOCK1).

Fixes: 106b104137fd ("counter: Add microchip TCB capture counter")
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Link: https://lore.kernel.org/r/20230905100835.315024-1-dharma.b@microchip.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

counter: chrdev: fix getting array extensions

commit 3170256d7bc1ef81587caf4b83573eb1f5bb4fb6 upstream.

When trying to watch a component array extension, and the array isn't the
first extended element, it fails as the type comparison is always done on
the 1st element. Fix it by indexing the 'ext' array.

Example on a dummy struct counter_comp:
static struct counter_comp dummy[] = {
COUNTER_COMP_DIRECTION(..),
...,
COUNTER_COMP_ARRAY_CAPTURE(...),
};
static struct counter_count dummy_cnt = {
...
.ext = dummy,
.num_ext = ARRAY_SIZE(dummy),
}

Currently, counter_get_ext() returns -EINVAL when trying to add a watch
event on one of the capture array element in such example.

Fixes: d2011be1e22f ("counter: Introduce the COUNTER_COMP_ARRAY component type")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20230829134029.2402868-2-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: core: Correct clear TM error log

commit a20c4350c6a12405b7f732b3ee6801ffe2cc45ce upstream.

The clear TM function error log status was inverted.

Fixes: 4693fad7d6d4 ("scsi: ufs: core: Log error handler activity")
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20231003022002.25578-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: avoid unsafe code pattern in find_pinctrl()

commit c153a4edff6ab01370fcac8e46f9c89cca1060c2 upstream.

The code in find_pinctrl() takes a mutex and traverses a list of pinctrl
structures. Later the caller bumps up reference count on the found
structure. Such pattern is not safe as pinctrl that was found may get
deleted before the caller gets around to increasing the reference count.

Fix this by taking the reference count in find_pinctrl(), while it still
holds the mutex.

Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/ZQs1RgTKg6VJqmPs@google.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf: add dma_fence_timestamp helper

commit b83ce9cb4a465b8f9a3fa45561b721a9551f60e3 upstream.

When a fence signals there is a very small race window where the timestamp
isn't updated yet. sync_file solves this by busy waiting for the
timestamp to appear, but on other ocassions didn't handled this
correctly.

Provide a dma_fence_timestamp() helper function for this and use it in
all appropriate cases.

Another alternative would be to grab the spinlock when that happens.

v2 by teddy: add a wait parameter to wait for the timestamp to show up, in case
   the accurate timestamp is needed and/or the timestamp is not based on
   ktime (e.g. hw timestamp)
v3 chk: drop the parameter again for unified handling

Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 1774baa64f93 ("drm/scheduler: Change scheduled fence track v2")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20230929104725.2358-1-christian.koenig@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: Remove duplicates in cgroup v1 tasks file

commit 1ca0b605150501b7dc59f3016271da4eb3e96fce upstream.

One PID may appear multiple times in a preloaded pidlist.
(Possibly due to PID recycling but we have reports of the same
task_struct appearing with different PIDs, thus possibly involving
transfer of PID via de_thread().)

Because v1 seq_file iterator uses PIDs as position, it leads to
a message:
> seq_file: buggy .next function kernfs_seq_next did not update position index

Conservative and quick fix consists of removing duplicates from `tasks`
file (as opposed to removing pidlists altogether). It doesn't affect
correctness (it's sufficient to show a PID once), performance impact
would be hidden by unconditional sorting of the pidlist already in place
(asymptotically).

Link: https://lore.kernel.org/r/20230823174804.23632-1-mkoutny@suse.com/
Suggested-by: Firo Yang <firo.yang@suse.com>
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: Use GET_CAPABILITY attributes data to set power supply scope

commit c9ca8de2eb15f9da24113e652980c61f95a47530 upstream.

On some OEM systems, adding a W7900 dGPU triggers RAS errors and hangs
at a black screen on startup.  This issue occurs only if `ucsi_acpi` has
loaded before `amdgpu` has loaded.  The reason for this failure is that
`amdgpu` uses power_supply_is_system_supplied() to determine if running
on AC or DC power at startup. If this value is reported incorrectly the
dGPU will also be programmed incorrectly and trigger errors.

power_supply_is_system_supplied() reports the wrong value because UCSI
power supplies provided as part of the system don't properly report the
scope as "DEVICE" scope (not powering the system).

In order to fix this issue check the capabilities reported from the UCSI
power supply to ensure that it supports charging a battery and that it can
be powered by AC.  Mark the scope accordingly.

Cc: stable@vger.kernel.org
Fixes: a7fbfd44c020 ("usb: typec: ucsi: Mark dGPUs as DEVICE scope")
Link: https://www.intel.com/content/www/us/en/products/docs/io/universal-serial-bus/usb-type-c-ucsi-spec.html
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231009184643.129986-1-mario.limonciello@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfp: flower: avoid rmmod nfp crash issues

commit 14690995c14109852c7ba6e316045c02e4254272 upstream.

When there are CT table entries, and you rmmod nfp, the following
events can happen:

task1：
    nfp_net_pci_remove
          ↓
    nfp_flower_stop->(asynchronous)tcf_ct_flow_table_cleanup_work(3)
          ↓
    nfp_zone_table_entry_destroy(1)

task2：
    nfp_fl_ct_handle_nft_flow(2)

When the execution order is (1)->(2)->(3), it will crash. Therefore, in
the function nfp_fl_ct_del_flow, nf_flow_table_offload_del_cb needs to
be executed synchronously.

At the same time, in order to solve the deadlock problem and the problem
of rtnl_lock sometimes failing, replace rtnl_lock with the private
nfp_fl_lock.

Fixes: 7cc93d888df7 ("nfp: flower-ct: remove callback delete deadlock")
Cc: stable@vger.kernel.org
Signed-off-by: Yanguo Li <yanguo.li@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mctp: perform route lookups under a RCU read-side lock

commit 5093bbfc10ab6636b32728e35813cbd79feb063c upstream.

Our current route lookups (mctp_route_lookup and mctp_route_lookup_null)
traverse the net's route list without the RCU read lock held. This means
the route lookup is subject to preemption, resulting in an potential
grace period expiry, and so an eventual kfree() while we still have the
route pointer.

Add the proper read-side critical section locks around the route
lookups, preventing premption and a possible parallel kfree.

The remaining net->mctp.routes accesses are already under a
rcu_read_lock, or protected by the RTNL for updates.

Based on an analysis from Sili Luo <rootlab@huawei.com>, where
introducing a delay in the route lookup could cause a UAF on
simultaneous sendmsg() and route deletion.

Reported-by: Sili Luo <rootlab@huawei.com>
Fixes: 889b7da23abf ("mctp: Add initial routing framework")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/29c4b0e67dc1bf3571df3982de87df90cae9b631.1696837310.git.jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tee: amdtee: fix use-after-free vulnerability in amdtee_close_session

commit f4384b3e54ea813868bb81a861bf5b2406e15d8f upstream.

There is a potential race condition in amdtee_close_session that may
cause use-after-free in amdtee_open_session. For instance, if a session
has refcount == 1, and one thread tries to free this session via:

    kref_put(&sess->refcount, destroy_session);

the reference count will get decremented, and the next step would be to
call destroy_session(). However, if in another thread,
amdtee_open_session() is called before destroy_session() has completed
execution, alloc_session() may return 'sess' that will be freed up
later in destroy_session() leading to use-after-free in
amdtee_open_session.

To fix this issue, treat decrement of sess->refcount and removal of
'sess' from session list in destroy_session() as a critical section, so
that it is executed atomically.

Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver")
Cc: stable@vger.kernel.org
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: goodix - ensure int GPIO is in input for gpio_count == 1 && gpio_int_idx == 0 case

commit 423622a90abb243944d1517b9f57db53729e45c4 upstream.

Add a special case for gpio_count == 1 && gpio_int_idx == 0 to
goodix_add_acpi_gpio_mappings().

It seems that on newer x86/ACPI devices the reset and irq GPIOs are no
longer listed as GPIO resources instead there is only 1 GpioInt resource
and _PS0 does the whole reset sequence for us.

This means that we must call acpi_device_fix_up_power() on these devices
to ensure that the chip is reset before we try to use it.

This part was already fixed in commit 3de93e6ed2df ("Input: goodix - call
acpi_device_fix_up_power() in some cases") by adding a call to
acpi_device_fix_up_power() to the generic "Unexpected ACPI resources"
catch all.

But it turns out that this case on some hw needs some more special
handling. Specifically the firmware may bootup with the IRQ pin in
output mode. The reset sequence from ACPI _PS0 (executed by
acpi_device_fix_up_power()) should put the pin in input mode,
but the GPIO subsystem has cached the direction at bootup, causing
request_irq() to fail due to gpiochip_lock_as_irq() failure:

[    9.119864] Goodix-TS i2c-GDIX1002:00: Unexpected ACPI resources: gpio_count 1, gpio_int_idx 0
[    9.317443] Goodix-TS i2c-GDIX1002:00: ID 911, version: 1060
[    9.321902] input: Goodix Capacitive TouchScreen as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX1002:00/input/input8
[    9.327840] gpio gpiochip0: (INT3453:00): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
[    9.327856] gpio gpiochip0: (INT3453:00): unable to lock HW IRQ 26 for IRQ
[    9.327861] genirq: Failed to request resources for GDIX1002:00 (irq 131) on irqchip intel-gpio
[    9.327912] Goodix-TS i2c-GDIX1002:00: request IRQ failed: -5

Fix this by adding a special case for gpio_count == 1 && gpio_int_idx == 0
which adds an ACPI GPIO lookup table for the int GPIO even though we cannot
use it for reset purposes (as there is no reset GPIO).

Adding the lookup will make the gpiod_int = gpiod_get(..., GPIOD_IN) call
succeed, which will explicitly set the direction to input fixing the issue.

Note this re-uses the acpi_goodix_int_first_gpios[] lookup table, since
there is only 1 GPIO in the ACPI resources the reset entry in that
lookup table will amount to a no-op.

Reported-and-tested-by: Michael Smith <1973.mjsmith@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231003215144.69527-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: i8042 - add Fujitsu Lifebook E5411 to i8042 quirk table

commit 80f39e1c27ba9e5a1ea7e68e21c569c9d8e46062 upstream.

In the initial boot stage the integrated keyboard of Fujitsu Lifebook E5411
refuses to work and it's not possible to type for example a dm-crypt
passphrase without the help of an external keyboard.

i8042.nomux kernel parameter resolves this issue but using that a PS/2
mouse is detected. This input device is unused even when the i2c-hid-acpi
kernel module is blacklisted making the integrated ELAN touchpad
(04F3:308A) not working at all.

Since the integrated touchpad is managed by the i2c_designware input
driver in the Linux kernel and you can't find a PS/2 mouse port on the
computer I think it's safe to not use the PS/2 mouse port at all.

Signed-off-by: Szilard Fabian <szfabian@bluemarch.art>
Link: https://lore.kernel.org/r/20231004011749.101789-1-szfabian@bluemarch.art
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: xpad - add PXN V900 support

commit a65cd7ef5a864bdbbe037267c327786b7759d4c6 upstream.

Add VID and PID to the xpad_device table to allow driver to use the PXN
V900 steering wheel, which is XTYPE_XBOX360 compatible in xinput mode.

Signed-off-by: Matthias Berndt <matthias_berndt@gmx.de>
Link: https://lore.kernel.org/r/4932699.31r3eYUQgx@fedora
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: psmouse - fix fast_reconnect function for PS/2 mode

commit e2cb5cc822b6c9ee72c56ce1d81671b22c05406a upstream.

When the SMBus connection is attempted psmouse_smbus_init() sets
the fast_reconnect pointer to psmouse_smbus_reconnecti(). If SMBus
initialization fails, elantech_setup_ps2() and synaptics_init_ps2() will
fallback to PS/2 mode, replacing the psmouse private data. This can cause
issues on resume, since psmouse_smbus_reconnect() expects to find an
instance of struct psmouse_smbus_dev in psmouse->private.

The issue was uncovered when in 92e24e0e57f7 ("Input: psmouse - add
delay when deactivating for SMBus mode") psmouse_smbus_reconnect()
started attempting to use more of the data structure. The commit was
since reverted, not because it was at fault, but because there was found
a better way of doing what it was attempting to do.

Fix the problem by resetting the fast_reconnect pointer in psmouse
structure in elantech_setup_ps2() and synaptics_init_ps2() when the PS/2
mode is used.

Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jeffery Miller <jefferymiller@google.com>
Fixes: bf232e460a35 ("Input: psmouse-smbus - allow to control psmouse_deactivate")
Link: https://lore.kernel.org/r/20231005002249.554877-1-jefferymiller@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: powermate - fix use-after-free in powermate_config_complete

commit 5c15c60e7be615f05a45cd905093a54b11f461bc upstream.

syzbot has found a use-after-free bug [1] in the powermate driver. This
happens when the device is disconnected, which leads to a memory free from
the powermate_device struct.  When an asynchronous control message
completes after the kfree and its callback is invoked, the lock does not
exist anymore and hence the bug.

Use usb_kill_urb() on pm->config to cancel any in-progress requests upon
device disconnection.

[1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reported-by: syzbot+0434ac83f907a1dbdd1e@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20230916-topic-powermate_use_after_free-v3-1-64412b81a7a2@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: fix type promotion bug on 32bit systems

commit 07bb00ef00ace88dd6f695fadbba76565756e55c upstream.

In this code "ret" is type long and "src_objlen" is unsigned int.  The
problem is that on 32bit systems, when we do the comparison signed longs
are type promoted to unsigned int.  So negative error codes from
do_splice_direct() are treated as success instead of failure.

Cc: stable@vger.kernel.org
Fixes: 1b0c3b9f91f0 ("ceph: re-org copy_file_range and fix some error paths")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: fix incorrect revoked caps assert in ceph_fill_file_size()

commit 15c0a870dc44ed14e01efbdd319d232234ee639f upstream.

When truncating the inode the MDS will acquire the xlock for the
ifile Locker, which will revoke the 'Frwsxl' caps from the clients.
But when the client just releases and flushes the 'Fw' caps to MDS,
for exmaple, and once the MDS receives the caps flushing msg it
just thought the revocation has finished. Then the MDS will continue
truncating the inode and then issued the truncate notification to
all the clients. While just before the clients receives the cap
flushing ack they receive the truncation notification, the clients
will detecte that the 'issued | dirty' is still holding the 'Fw'
caps.

Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/56693
Fixes: b0d7c2231015 ("ceph: introduce i_truncate_mutex")
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: use kernel_connect()

commit 7563cf17dce0a875ba3d872acdc63a78ea344019 upstream.

Direct calls to ops->connect() can overwrite the address parameter when
used in conjunction with BPF SOCK_ADDR hooks. Recent changes to
kernel_connect() ensure that callers are insulated from such side
effects. This patch wraps the direct call to ops->connect() with
kernel_connect() to prevent unexpected changes to the address passed to
ceph_tcp_connect().

This change was originally part of a larger patch targeting the net tree
addressing all instances of unprotected calls to ops->connect()
throughout the kernel, but this change was split up into several patches
targeting various trees.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/netdev/20230821100007.559638-1-jrife@google.com/
Link: https://lore.kernel.org/netdev/9944248dba1bce861375fcce9de663934d933ba9.camel@redhat.com/
Fixes: d74bad4e74ee ("bpf: Hooks for sys_connect")
Signed-off-by: Jordan Rife <jrife@google.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/47x: Fix 47x syscall return crash

commit f0eee815babed70a749d2496a7678be5b45b4c14 upstream.

Eddie reported that newer kernels were crashing during boot on his 476
FSP2 system:

  kernel tried to execute user page (b7ee2000) - exploit attempt? (uid: 0)
  BUG: Unable to handle kernel instruction fetch
  Faulting instruction address: 0xb7ee2000
  Oops: Kernel access of bad area, sig: 11 [#1]
  BE PAGE_SIZE=4K FSP-2
  Modules linked in:
  CPU: 0 PID: 61 Comm: mount Not tainted 6.1.55-d23900f.ppcnf-fsp2 #1
  Hardware name: ibm,fsp2 476fpe 0x7ff520c0 FSP-2
  NIP:  b7ee2000 LR: 8c008000 CTR: 00000000
  REGS: bffebd83 TRAP: 0400   Not tainted (6.1.55-d23900f.ppcnf-fs p2)
  MSR:  00000030 <IR,DR>  CR: 00001000  XER: 20000000
  GPR00: c00110ac bffebe63 bffebe7e bffebe88 8c008000 00001000 00000d12 b7ee2000
  GPR08: 00000033 00000000 00000000 c139df10 48224824 1016c314 10160000 00000000
  GPR16: 10160000 10160000 00000008 00000000 10160000 00000000 10160000 1017f5b0
  GPR24: 1017fa50 1017f4f0 1017fa50 1017f740 1017f630 00000000 00000000 1017f4f0
  NIP [b7ee2000] 0xb7ee2000
  LR [8c008000] 0x8c008000
  Call Trace:
  Instruction dump:
  XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
  XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
  ---[ end trace 0000000000000000 ]---

The problem is in ret_from_syscall where the check for
icache_44x_need_flush is done. When the flush is needed the code jumps
out-of-line to do the flush, and then intends to jump back to continue
the syscall return.

However the branch back to label 1b doesn't return to the correct
location, instead branching back just prior to the return to userspace,
causing bogus register values to be used by the rfi.

The breakage was introduced by commit 6f76a01173cc
("powerpc/syscall: implement system call entry/exit logic in C for PPC32") which
inadvertently removed the "1" label and reused it elsewhere.

Fix it by adding named local labels in the correct locations. Note that
the return label needs to be outside the ifdef so that CONFIG_PPC_47x=n
compiles.

Fixes: 6f76a01173cc ("powerpc/syscall: implement system call entry/exit logic in C for PPC32")
Cc: stable@vger.kernel.org # v5.12+
Reported-by: Eddie James <eajames@linux.ibm.com>
Tested-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/linuxppc-dev/fdaadc46-7476-9237-e104-1d2168526e72@linux.ibm.com/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://msgid.link/20231010114750.847794-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thunderbolt: Restart XDomain discovery handshake after failure

commit 308092d080852f8997126e5b3507536162416f4a upstream.

Alex reported that after rebooting the other host the peer-to-peer link
does not come up anymore. The reason for this is that the host that was
not rebooted tries to send the UUID request only 10 times according to
the USB4 Inter-Domain spec and gives up if it does not get reply. Then
when the other side is actually ready it cannot get the link established
anymore. The USB4 Inter-Domain spec requires that the discovery protocol
is restarted in that case so implement this now.

Reported-by: Alex Balcanquall <alex@alexbal.com>
Fixes: 8e1de7042596 ("thunderbolt: Add support for XDomain lane bonding")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thunderbolt: Check that lane 1 is in CL0 before enabling lane bonding

commit a9fdf5f933a6f2b358fad0194b1287b67f6704b1 upstream.

Marek reported that when BlackMagic UltraStudio device is connected the
kernel repeatedly tries to enable lane bonding without success making
the device non-functional. It looks like the device does not have lane 1
connected at all so even though it is enabled we should not try to bond
the lanes. For this reason check that lane 1 is in fact CL0 (connected,
active) before attempting to bond the lanes.

Reported-by: Marek Šanta <teslan223@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217737
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thunderbolt: Workaround an IOMMU fault on certain systems with Intel Maple Ridge

commit 582620d9f6b352552bc9a3316fe2b1c3acd8742d upstream.

On some systems the IOMMU blocks the first couple of driver ready
messages to the connection manager firmware as can be seen in below
excerpts:

  thunderbolt 0000:06:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0010 address=0xbb0e3400 flags=0x0020]

or

  DMAR: DRHD: handling fault status reg 2
  DMAR: [DMA Write] Request device [04:00.0] PASID ffffffff fault addr 69974000 [fault reason 05] PTE Write access is not set

The reason is unknown and hard to debug because we were not able to
reproduce this locally. This only happens on certain systems with Intel
Maple Ridge Thunderbolt controller. If there is a device connected when
the driver is loaded the issue does not happen either. Only when there
is nothing connected (so typically when the system is booted up).

We can work this around by sending the driver ready several times. After
a couple of retries the message goes through and the controller works
just fine. For this reason make the number of retries a parameter for
icm_request() and then for Maple Ridge (and Titan Ridge as they us the
same function but this should not matter) increase number of retries
while shortening the timeout accordingly.

Reported-by: Werner Sembach <wse@tuxedocomputers.com>
Reported-by: Konrad J Hambrick <kjhambrick@gmail.com>
Reported-by: Calvin Walton <calvin.walton@kepstin.ca>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=214259
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mcb: remove is_added flag from mcb_device struct

commit 0f28ada1fbf0054557cddcdb93ad17f767105208 upstream.

When calling mcb_bus_add_devices(), both mcb devices and the mcb
bus will attempt to attach a device to a driver because they share
the same bus_type. This causes an issue when trying to cast the
container of the device to mcb_device struct using to_mcb_device(),
leading to a wrong cast when the mcb_bus is added. A crash occurs
when freing the ida resources as the bus numbering of mcb_bus gets
confused with the is_added flag on the mcb_device struct.

The only reason for this cast was to keep an is_added flag on the
mcb_device struct that does not seem necessary. The function
device_attach() handles already bound devices and the mcb subsystem
does nothing special with this is_added flag so remove it completely.

Fixes: 18d288198099 ("mcb: Correctly initialize the bus's device")
Cc: stable <stable@kernel.org>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Co-developed-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com>
Signed-off-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com>
Link: https://lore.kernel.org/r/20230906114901.63174-2-JoseJavier.Rodriguez@duagon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpu: Fix AMD erratum #1485 on Zen4-based CPUs

commit f454b18e07f518bcd0c05af17a2239138bff52de upstream.

Fix erratum #1485 on Zen4 parts where running with STIBP disabled can
cause an #UD exception. The performance impact of the fix is negligible.

Reported-by: René Rebe <rene@exactcode.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: René Rebe <rene@exactcode.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/D99589F4-BC5D-430B-87B2-72C20370CF57@exactcode.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/lbr: Filter vsyscall addresses

commit e53899771a02f798d436655efbd9d4b46c0f9265 upstream.

We found that a panic can occur when a vsyscall is made while LBR sampling
is active. If the vsyscall is interrupted (NMI) for perf sampling, this
call sequence can occur (most recent at top):

    __insn_get_emulate_prefix()
    insn_get_emulate_prefix()
    insn_get_prefixes()
    insn_get_opcode()
    decode_branch_type()
    get_branch_type()
    intel_pmu_lbr_filter()
    intel_pmu_handle_irq()
    perf_event_nmi_handler()

Within __insn_get_emulate_prefix() at frame 0, a macro is called:

    peek_nbyte_next(insn_byte_t, insn, i)

Within this macro, this dereference occurs:

    (insn)->next_byte

Inspecting registers at this point, the value of the next_byte field is the
address of the vsyscall made, for example the location of the vsyscall
version of gettimeofday() at 0xffffffffff600000. The access to an address
in the vsyscall region will trigger an oops due to an unhandled page fault.

To fix the bug, filtering for vsyscalls can be done when
determining the branch type. This patch will return
a "none" branch if a kernel address if found to lie in the
vsyscall region.

Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: not allow to open file if delelete on close bit is set

commit f43328357defc0dc9d28dbd06dc3361fd2b22e28 upstream.

Cthon test fail with the following error.

check for proper open/unlink operation
nfsjunk files before unlink:
  -rwxr-xr-x 1 root root 0  9월 25 11:03 ./nfs2y8Jm9
./nfs2y8Jm9 open; unlink ret = 0
nfsjunk files after unlink:
  -rwxr-xr-x 1 root root 0  9월 25 11:03 ./nfs2y8Jm9
data compare ok
nfsjunk files after close:
  ls: cannot access './nfs2y8Jm9': No such file or directory
special tests failed

Cthon expect to second unlink failure when file is already unlinked.
ksmbd can not allow to open file if flags of ksmbd inode is set with
S_DEL_ON_CLS flags.

Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: EC: Add quirk for the HP Pavilion Gaming 15-dk1xxx

commit cd4aece493f99f95d41edcce32927d70a5dde923 upstream.

Added GPE quirk entry for the HP Pavilion Gaming 15-dk1xxx.
There is a quirk entry for 2 15-c..... laptops, this is
for a new version which has 15-dk1xxx as identifier.

This fixes the LID switch and rfkill and brightness hotkeys
not working.

Closes: https://github.com/systemd/systemd/issues/28942
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CBA

commit c1ed72171ed580fbf159e703b77685aa4b0d0df5 upstream.

Like various other ASUS ExpertBook-s, the ASUS ExpertBook B1402CBA
has an ACPI DSDT table that describes IRQ 1 as ActiveLow while
the kernel overrides it to EdgeHigh.

This prevents the keyboard from working. To fix this issue, add this laptop
to the skip_override_table so that the kernel does not override IRQ 1.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217901
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Don't set dpms_off for seamless boot

commit 23645bca98304a2772f0de96f97370dd567d0ae6 upstream.

[Why]
eDPs fail to light up with seamless boot enabled

[How]
When seamless boot is enabled don't configure dpms_off
in disable_vbios_mode_if_required.

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: add missing NULL check

commit ff89f064dca38e2203790bf876cc7756b8ab2961 upstream.

bo->tbo.resource can easily be NULL here.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2902
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/atomic-helper: relax unregistered connector check

commit 2b7947bd32e243c52870d54141d3b4ea6775e63d upstream.

The driver might pull connectors which weren't submitted by
user-space into the atomic state. For instance,
intel_dp_mst_atomic_master_trans_check() pulls in connectors
sharing the same DP-MST stream. However, if the connector is
unregistered, this later fails with:

    [  559.425658] i915 0000:00:02.0: [drm:drm_atomic_helper_check_modeset] [CONNECTOR:378:DP-7] is not registered

Skip the unregistered connector check to allow user-space to turn
off connectors one-by-one.

See this wlroots issue:
https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3407

Previous discussion:
https://lore.kernel.org/intel-gfx/Y6GX7z17WmDSKwta@ideak-desk.fi.intel.com/

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231005131623.114379-1-contact@emersion.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: mediatek: mt8195-demo: update and reorder reserved memory regions

commit 6cd2a30b96a4b2d270bc1ef1611429dc3fa63327 upstream.

The dts file of the MediaTek MT8195 demo board has been updated to include
new reserved memory regions.
These reserved memory regions are:
 - SCP
 - VPU,
 - Sound DMA
 - APU.

These regions are defined with the "shared-dma-pool" compatible property.
In addition, the existing reserved memory regions have been reordered by
their addresses to improve readability and maintainability of the DTS
file.

Cc: stable@vger.kernel.org # 6.1, 6.4, 6.5
Fixes: e4a417520101 ("arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230905034511.11232-2-macpaul.lin@mediatek.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-3-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: mediatek: mt8195-demo: fix the memory size to 8GB

commit 25389c03c21c9587dd21c768d1cbfa514a3ca211 upstream.

The onboard dram of mt8195-demo board is 8GB.

Cc: stable@vger.kernel.org # 6.1, 6.4, 6.5
Fixes: 6147314aeedc ("arm64: dts: mediatek: Add device-tree for MT8195 Demo board")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230905034511.11232-1-macpaul.lin@mediatek.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-2-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: addac: Kconfig: update ad74413r selections

commit b120dd3a15582fb7a959cecb05e4d9814fcba386 upstream.

Building ad74413r without selecting IIO_BUFFER and
IIO_TRIGGERED_BUFFER generates error with respect to the iio trigger
functions that are used within the driver.
Update the Kconfig accordingly.

Fixes: fea251b6a5db ("iio: addac: add AD74413R driver")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20230912085421.51102-1-antoniu.miclaus@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: pressure: ms5611: ms5611_prom_is_valid false negative bug

commit fd39d9668f2ce9f4b05ad55e8c8d80c098073e0b upstream.

The ms5611 driver falsely rejects lots of MS5607-02BA03-50 chips
with "PROM integrity check failed" because it doesn't accept a prom crc
value of zero as legitimate.

According to the datasheet for this chip (and the manufacturer's
application note about the PROM CRC), none of the possible values for the
CRC are excluded - but the current code in ms5611_prom_is_valid() ends with

return crc_orig != 0x0000 && crc == crc_orig

Discussed with the driver author (Tomasz Duszynski) and he indicated that
at that time (2015) he was dealing with some faulty chip samples which
returned blank data under some circumstances and/or followed example code
which indicated CRC zero being bad.

As far as I can tell this exception should not be applied anymore; We've
got a few hundred custom boards here with this chip where large numbers
of the prom have a legitimate CRC value 0, and do work fine, but which the
current driver code wrongly rejects.

Signed-off-by: Alexander Zangerl <az@breathe-safe.com>
Fixes: c0644160a8b5 ("iio: pressure: add support for MS5611 pressure and temperature sensor")
Link: https://lore.kernel.org/r/2535-1695168070.831792@Ze3y.dhYT.s3fx
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>