powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address

of_get_next_parent() returns a node pointer with refcount incremented,
we should use of_node_put() on it when not need anymore.
Add missing of_node_put() in the error path to avoid refcount leak.

Fixes: ce21b3c9648a ("[CELL] add support for MSI on Axon-based Cell systems")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220605065129.63906-1-linmq006@gmail.com

powerpc/xive: Fix refcount leak in xive_get_max_prio

of_find_node_by_path() returns a node pointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.

Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220605053225.56125-1-linmq006@gmail.com

powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader

of_find_node_by_path() returns remote device nodepointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.

Fixes: 0afacde3df4c ("[POWERPC] spufs: allow isolated mode apps by starting the SPE loader")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220603121543.22884-1-linmq006@gmail.com

powerpc/perf: Include caps feature for power10 DD1 version

Commit 6320e693d98c ("powerpc/perf: Add support for caps under sysfs in
powerpc") added support for caps under sysfs in powerpc. This added caps
directory to: /sys/bus/event_source/devices/cpu/ for power8, power9,
power10 and generic compat PMU in respective PMU driver code.

For power10, it is added under "power10_pmu_attr_groups". But
for DD1 version, attr_groups are defined under dd1 array:
"power10_pmu_attr_groups_dd1". Since caps is not added for DD1,
it fails to include "cpu/caps" in DD1 model.

The issue was observed while booting power10 pseries with qemu version
6, but not observed with qemu version 7. This is because qemu version 7
uses a DD 2.0 CPU model.

Below is the trace log:

  Can't update unknown attr grp name: cpu/caps^M
  ------------[ cut here ]------------^M
  Failed to register pmu: cpu, reason -22^M
  WARNING: CPU: 1 PID: 1 at kernel/events/core.c:13427 perf_event_sysfs_init+0xbc/0x108^M
  Modules linked in:^M
  CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc2-00111-g6320e693d98c #148^M
  NIP:  c0000000020391f4 LR: c0000000020391f0 CTR: c0000000008c9c30^M
  REGS: c0000000044c38c0 TRAP: 0700   Not tainted  (5.19.0-rc2-00111-g6320e693d98c)^M
  MSR:  8000000002029033 <SF,VEC,EE,ME,IR,DR,RI,LE>  CR: 48000281  XER: 20040000^M
  CFAR: c00000000013feac IRQMASK: 0 ^M
  GPR00: c0000000020391f0 c0000000044c3b60 c00000000283db00 0000000000000027 ^M
  GPR04: 80000000ffffe0a8 0000000000000000 0000000000000004 00000000fdcd0000 ^M
  GPR08: 0000000000000027 c0000000ffe07e08 0000000000000001 0000000000000000 ^M
  GPR12: c00000000035dd90 c0000000fffff300 c000000000012478 0000000000000000 ^M
  GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ^M
  GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ^M
  GPR24: c000000002003480 0000000000000007 c0000000012a78d0 c000000001170a80 ^M
  GPR28: c0000000026c4df8 c0000000026c4e68 0000000000000000 c0000000025a8628 ^M
  NIP [c0000000020391f4] perf_event_sysfs_init+0xbc/0x108^M
  LR [c0000000020391f0] perf_event_sysfs_init+0xb8/0x108^M
  Call Trace:^M
  [c0000000044c3b60] [c0000000020391f0] perf_event_sysfs_init+0xb8/0x108 (unreliable)^M
  [c0000000044c3bf0] [c000000000011ec4] do_one_initcall+0x64/0x2d0^M
  [c0000000044c3cd0] [c0000000020049fc] kernel_init_freeable+0x338/0x3e0^M
  [c0000000044c3db0] [c0000000000124a0] kernel_init+0x30/0x1a0^M
  [c0000000044c3e10] [c00000000000cd54] ret_from_kernel_thread+0x5c/0x64^M
  Instruction dump:^M
  813f0038 2c090000 4180002c 7fe3fb78 4a3280c5 2c030000 7c651b78 41820018 ^M
  e89f0030 7f63db78 4a106c59 60000000 <0fe00000> ebff0000 4bffffb4 39200001 ^M
  ---[ end trace 0000000000000000 ]---^M

Fix it by adding caps for dd1 attr_groups in power10 PMU driver.

Fixes: 6320e693d98c ("powerpc/perf: Add support for caps under sysfs in powerpc")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Update change log to mention qemu 7 DD2.0 CPU model]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220728163746.85062-1-atrajeev@linux.vnet.ibm.com

Merge branch 'topic/ppc-kvm' into next

Bring in a few more commits we are keeping in our KVM topic branch.

powerpc: add support for syscall stack randomization

Add support for adding a random offset to the stack while handling
syscalls. This patch uses mftb() instead of get_random_int() for better
performance.

In order to avoid unconditional stack canaries on syscall entry (due to
the use of alloca()), also disable stack protector to avoid triggering
needless checks and slowing down the entry path. As there is no general
way to control stack protector coverage with a function attribute, this
must be disabled at the compilation unit level.

Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220701082435.126596-3-xiujianfeng@huawei.com

powerpc: Move system_call_exception() to syscall.c

This is a lead-up patch to enable syscall stack randomization, which
uses alloca() and makes the compiler add unconditional stack canaries
on syscall entry. In order to avoid triggering needless checks and
slowing down the entry path, the feature needs to disable stack
protector at the compilation unit level as there is no general way to
control stack protector coverage with a function attribute.

So move system_call_exception() to syscall.c to avoid affecting other
functions in interrupt.c.

Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220701082435.126596-2-xiujianfeng@huawei.com

powerpc/powernv: rename remaining rng powernv_ functions to pnv_

The preferred nomenclature is pnv_, not powernv_, but rng.c used
powernv_ for some reason, which isn't consistent with the rest. A recent
commit added a few pnv_ functions to rng.c, making the file a bit of a
mishmash. This commit just replaces the rest of them.

Fixes: f3eac426657d ("powerpc/powernv: wire up rng during setup_arch")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
[mpe: Reorder after bug fix commits]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220727143219.2684192-3-mpe@ellerman.id.au

powerpc/powernv/kvm: Use darn for H_RANDOM on Power9

The existing logic in KVM to support guests calling H_RANDOM only works
on Power8, because it looks for an RNG in the device tree, but on Power9
we just use darn.

In addition the existing code needs to work in real mode, so we have the
special cased powernv_get_random_real_mode() to deal with that.

Instead just have KVM call ppc_md.get_random_seed(), and do the real
mode check inside of there, that way we use whatever RNG is available,
including darn on Power9.

Fixes: e928e9cb3601 ("KVM: PPC: Book3S HV: Add fast real-mode H_RANDOM implementation.")
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
[mpe: Rebase on previous commit, update change log appropriately]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220727143219.2684192-2-mpe@ellerman.id.au

powerpc/powernv: Avoid crashing if rng is NULL

On a bare-metal Power8 system that doesn't have an "ibm,power-rng", a
malicious QEMU and guest that ignore the absence of the
KVM_CAP_PPC_HWRNG flag, and calls H_RANDOM anyway, will dereference a
NULL pointer.

In practice all Power8 machines have an "ibm,power-rng", but let's not
rely on that, add a NULL check and early return in
powernv_get_random_real_mode().

Fixes: e928e9cb3601 ("KVM: PPC: Book3S HV: Add fast real-mode H_RANDOM implementation.")
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220727143219.2684192-1-mpe@ellerman.id.au

selftests/powerpc: Fix matrix multiply assist test

The ISA states: "when ACC[i] contains defined data, the contents of VSRs
4×i to 4×i+3 are undefined until either a VSX Move From ACC instruction
is used to copy the contents of ACC[i] to VSRs 4×i to 4×i+3 or some other
instruction directly writes to one of these VSRs." We aren't doing this.

This test only works on Power10 because the hardware implementation
happens to map ACC0 to VSRs 0-3, but will fail on any other implementation
that doesn't do this. So add xxmfacc between writing to the accumulator
and accessing the VSRs.

Fixes: 3527e1ab9a79 ("selftests/powerpc: Add matrix multiply assist (MMA) test")
Signed-off-by: Rashmica Gupta <rashmica@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220617043935.428083-1-rashmica@linux.ibm.com

powerpc/signal: Update comment for clarity

The comment being referred to was deleted in commit af1bbc3dd3d5 ("powerpc:
Remove UP only lazy floating point and vector optimisations").

Add a bit more detail so it's clear why we need to clear the FP/VEC/VSX
bits here.

Signed-off-by: Rashmica Gupta <rashmica@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220617043135.426897-1-rashmica@linux.ibm.com

powerpc: make facility_unavailable_exception 64s

The facility unavailable exception is only available on ppc book3s
machines so use CONFIG_PPC_BOOK3S_64 rather than CONFIG_PPC64.
tm_unavailable is only called from facility_unavailable_exception so can
also be under this Kconfig symbol.

Signed-off-by: Rashmica Gupta <rashmica@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220617042805.426231-1-rashmica@linux.ibm.com

powerpc/platforms/83xx/suspend: Remove write-only global variable

pmc_dev is only assigned in .probe(), otherwise the variable is unused.
So drop this pointer that serves no purpose.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220707061441.193869-3-u.kleine-koenig@pengutronix.de

powerpc/platforms/83xx/suspend: Prevent unloading the driver

Returning an error in .remove() doesn't prevent a driver from being
unloaded. On unbind this only results in an error message, but the
device is remove anyhow.

I guess the author's idea of just returning -EPERM in .remove() was to
prevent unbinding a device. To achieve that set the suppress_bind_attrs
driver property and drop the useless .remove callback.

This is a preparation for making platform remove callbacks return void.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220707061441.193869-2-u.kleine-koenig@pengutronix.de

powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration

By moving up pmc_types and pmc_match, the forward declaration for pmc_match
can be dropped.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220707061441.193869-1-u.kleine-koenig@pengutronix.de

powerpc/sysdev: Fix comment typo

The double `is' is duplicated in line 110, remove one.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220715035250.5978-1-wangborong@cdjrlc.com

powerpc/pseries/vas: Fix comment typo

The double `the' in line 807 is duplicated, remove one.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220718075553.70897-1-wangborong@cdjrlc.com

powerpc/85xx: P2020: Add law_trgt_if property to PCIe DT nodes

DT law_trgt_if property defines Local Access Window Target Interface.

Local Access Window Target Interface is used for identifying individual
peripheral and mapping its memory to CPU. Interface id is defined by
hardware itself.

U-Boot uses law_trgt_if DT property in PCIe nodes for configuring memory
mapping of individual PCIe controllers.

Linux kernel fsl_pci.c driver currently does not touch Local Access Window
and expects that U-Boot configures it properly.

Add law_trgt_if property to PCIe DT nodes for P2020. This allows usage of
kernel P2020 PCIe DT nodes in U-Boot. And therefore allows to share P2020
DTS files between Linux kernel and U-Boot.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220504180822.29782-1-pali@kernel.org

powerpc/pci: Prefer PCI domain assignment via DT 'linux,pci-domain' and alias

Other Linux architectures use DT property 'linux,pci-domain' for
specifying fixed PCI domain of PCI controller specified in Device-Tree.

And lot of Freescale powerpc boards have defined numbered pci alias in
Device-Tree for every PCIe controller which number specify preferred PCI
domain.

So prefer usage of DT property 'linux,pci-domain' (via function
of_get_pci_domain_nr()) and DT pci alias (via function
of_alias_get_id()) on powerpc architecture for assigning PCI domain to
PCI controller.

Fixes: 63a72284b159 ("powerpc/pci: Assign fixed PHB number based on device-tree properties")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220706102148.5060-2-pali@kernel.org

powerpc/85xx: Fix description of MPC85xx and P1/P2 boards options

More MPC85xx and P1/P2 boards options have incorrect description. Fix them
to include list of all boards for which they enable/disable support.

Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220709124305.17559-1-pali@kernel.org

powerpc/pseries: define driver for Platform KeyStore

PowerVM provides an isolated Platform Keystore(PKS) storage allocation
for each LPAR with individually managed access controls to store
sensitive information securely. It provides a new set of hypervisor
calls for Linux kernel to access PKS storage.

Define POWER LPAR Platform KeyStore(PLPKS) driver using H_CALL interface
to access PKS storage.

Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220723113048.521744-2-nayna@linux.ibm.com

powerpc/iommu: Fix iommu_table_in_use for a small default DMA window case

The existing iommu_table_in_use() helper checks if the kernel is using
any of TCEs. There are some reserved TCEs:
1) the very first one if DMA window starts from 0 to avoid having a zero
but still valid DMA handle;
2) it_reserved_start..it_reserved_end to exclude MMIO32 window in case
the default window spans across that - this is the default for the first
DMA window on PowerNV.

When 1) is the case and 2) is not the helper does not skip 1) and returns
wrong status.

This only seems occurring when passing through a PCI device to a nested
guest (not something we support really well) so it has not been seen
before.

This fixes the bug by adding a special case for no MMIO32 reservation.

Fixes: 3c33066a2190 ("powerpc/kernel/iommu: Add new iommu_table_in_use() helper")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220714081119.3714605-1-aik@ozlabs.ru

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as it is not used except IOMMU debugfs where it is used for a node name.

This initializes it_index witn a unique number to avoid warnings and
have a node for every iommu_table.

This should not cause any behavioral change without CONFIG_IOMMU_DEBUGFS.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220714080800.3712998-1-aik@ozlabs.ru

pseries/iommu/ddw: Fix kdump to work in absence of ibm,dma-window

The pseries platform uses 32bit default DMA window (always 4K pages) and
optional 64bit DMA window available via DDW ("Dynamic DMA Windows"),
64K or 2M pages. For ages the default one was not removed and a huge
window was created in addition. Things changed with SRIOV-enabled
PowerVM which creates a default-and-bigger DMA window in 64bit space
(still using 4K pages) for IOV VFs so certain OSes do not need to use
the DDW API in order to utilize all available TCE budget.

Linux on the other hand removes the default window and creates a bigger
one (with more TCEs or/and a bigger page size - 64K/2M) in a bid to map
the entire RAM, and if the new window size is smaller than that - it
still uses this new bigger window. The result is that the default window
is removed but the "ibm,dma-window" property is not.

When kdump is invoked, the existing code tries reusing the existing 64bit
DMA window which location and parameters are stored in the device tree but
this fails as the new property does not make it to the kdump device tree
blob. So the code falls back to the default window which does not exist
anymore although the device tree says that it does. The result of that
is that PCI devices become unusable and cannot be used for kdumping.

This preserves the DMA64 and DIRECT64 properties in the device tree blob
for the crash kernel. Since the crash kernel setup is done after device
drivers are loaded and probed, the proper DMA config is stored at least
for boot time devices.

Because DDW window is optional and the code configures the default window
first, the existing code creates an IOMMU table descriptor for
the non-existing default DMA window. It is harmless for kdump as it does
not touch the actual window (only reads what is mapped and marks those IO
pages as used) but it is bad for kexec which clears it thinking it is
a smaller default window rather than a bigger DDW window.

This removes the "ibm,dma-window" property from the device tree after
a bigger window is created and the crash kernel setup picks it up.

Fixes: 381ceda88c4c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220629060614.1680476-1-aik@ozlabs.ru

powerpc/crash: save cpu register data in crash_smp_send_stop()

During kdump, two set of NMI IPIs are sent to secondary CPUs, if
'crash_kexec_post_notifiers' option is set. The first set of NMI IPIs
to stop the CPUs and the other set to collect register data. Instead,
capture register data for secondary CPUs while stopping them itself.
Also, fallback to smp_send_stop() in case the function gets called
without kdump configured.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220630064942.192283-1-hbathini@linux.ibm.com

powerpc: Update reviewers

Christophe and Nick have been active in recent years on the mailing list
and making contributions, add them as reviewers.

Paul and Ben are no longer actively reviewing powerpc patches, remove
them from the reviewers, they're still on linuxppc-dev if needed.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220629060817.2943966-1-mpe@ellerman.id.au

powerpc: Finally remove unnecessary headers from asm/prom.h

Remove all headers included from asm/prom.h which are not used
by asm/prom.h itself.

Declare struct device_node and struct property locally to
avoid including of.h

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4be954abef978b34cff9193fc566ffefdd3517bb.1657264228.git.christophe.leroy@csgroup.eu

powerpc: Remove asm/prom.h from asm/mpc52xx.h and asm/pci.h

asm/pci.h and asm/mpc52xx.h don't need asm/prom.h

Declare struct device_node locally to avoid including of.h

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Add missing include of prom.h to of_rtc.c]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cf5243343e2364c2b40f22ee5ad9a6e2453d1121.1657264228.git.christophe.leroy@csgroup.eu

EDAC/mpc85xx: Include required of headers directly

A subsequent commit to cleanup powerpc's asm/prom.h leads to build
errors in mpc85xx_edac.c due to missing headers. Include all required
headers directly to avoid the build failure.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

scsi: cxlflash: Include missing linux/irqdomain.h

powerpc's asm/prom.h brings some headers that it doesn't need itself.

Once those headers are removed from asm/prom.h, the following
errors occur:

  CC [M]  drivers/scsi/cxlflash/ocxl_hw.o
drivers/scsi/cxlflash/ocxl_hw.c: In function 'afu_map_irq':
drivers/scsi/cxlflash/ocxl_hw.c:195:16: error: implicit declaration of function 'irq_create_mapping' [-Werror=implicit-function-declaration]
  195 |         virq = irq_create_mapping(NULL, irq->hwirq);
      |                ^~~~~~~~~~~~~~~~~~
drivers/scsi/cxlflash/ocxl_hw.c:222:9: error: implicit declaration of function 'irq_dispose_mapping' [-Werror=implicit-function-declaration]
  222 |         irq_dispose_mapping(virq);
      |         ^~~~~~~~~~~~~~~~~~~
drivers/scsi/cxlflash/ocxl_hw.c: In function 'afu_unmap_irq':
drivers/scsi/cxlflash/ocxl_hw.c:264:13: error: implicit declaration of function 'irq_find_mapping'; did you mean 'is_cow_mapping'? [-Werror=implicit-function-declaration]
  264 |         if (irq_find_mapping(NULL, irq->hwirq)) {
      |             ^~~~~~~~~~~~~~~~
      |             is_cow_mapping
cc1: some warnings being treated as errors

Fix it by including linux/irqdomain.h

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c6c0cc5e9179a642370a61439f95158271a78c03.1657264228.git.christophe.leroy@csgroup.eu

video: fbdev: offb: Include missing linux/platform_device.h

A lot of drivers were getting platform and of headers
indirectly via headers like asm/pci.h or asm/prom.h

Most of them were fixed during 5.19 cycle but a newissue was
introduced by commit 52b1b46c39ae ("of: Create platform devices
for OF framebuffers")

Include missing platform_device.h to allow cleaning asm/pci.h

Fixes: 52b1b46c39ae ("of: Create platform devices for OF framebuffers")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f75b383673663e27f6b57e50b4abfb9fe3780b00.1657264228.git.christophe.leroy@csgroup.eu

docs: powerpc: add elf_hwcaps to table of contents

elf_hwcaps documentation is missing from table of contents at index.rst,
hence triggers Sphinx warning:

Documentation/powerpc/elf_hwcaps.rst: WARNING: document isn't included in any toctree

Add the documentation to the index to fix the warning.

Fixes: 3df1ff42e69e91 ("powerpc: add documentation for HWCAPs")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/linuxppc-dev/20220727220050.549db613@canb.auug.org.au/
Link: https://lore.kernel.org/r/20220728033332.27836-4-bagasdotme@gmail.com

docs: powerpc: use different label name for elf_hwcaps.rst

Sphinx reported duplicate label warning:

WARNING: duplicate label elf_hwcaps_index, other instance in Documentation/arm64/elf_hwcaps.rst

The warning is caused by elf_hwcaps_index label name is already used for
arm64 documentation, whileas powerpc use the same name.

Disambiguate the label name for powerpc.

Fixes: 3df1ff42e69e91 ("powerpc: add documentation for HWCAPs")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/linuxppc-dev/20220727220050.549db613@canb.auug.org.au/
Link: https://lore.kernel.org/r/20220728033332.27836-3-bagasdotme@gmail.com

docs: powerpc: fix indentation warnings

Sphinx reported unexpected indentation warnings:

Documentation/powerpc/elf_hwcaps.rst:82: WARNING: Unexpected indentation.
Documentation/powerpc/elf_hwcaps.rst:100: WARNING: Unexpected indentation.
Documentation/powerpc/elf_hwcaps.rst:117: WARNING: Unexpected indentation.
Documentation/powerpc/elf_hwcaps.rst:122: WARNING: Unexpected indentation.
Documentation/powerpc/elf_hwcaps.rst:144: WARNING: Unexpected indentation.

Fix these warnings by unindenting commit references and using literal code
block for instructions list for PPC_FEATURE_ICACHE_SNOOP.

Fixes: 3df1ff42e69e91 ("powerpc: add documentation for HWCAPs")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/linuxppc-dev/20220727220050.549db613@canb.auug.org.au/
Link: https://lore.kernel.org/r/20220728033332.27836-2-bagasdotme@gmail.com

powerpc/64e: Fix build failure with GCC 12 (unrecognized opcode: `wrteei')

With GCC 12, corenet64_smp_defconfig leads to the following build errors:

  CC      arch/powerpc/kernel/irq.o
{standard input}: Assembler messages:
{standard input}:3616: Error: unrecognized opcode: `wrteei'
{standard input}:5689: Error: unrecognized opcode: `wrteei'
  CC      arch/powerpc/kernel/pmc.o
{standard input}: Assembler messages:
{standard input}:42: Error: unrecognized opcode: `mfpmr'
{standard input}:53: Error: unrecognized opcode: `mtpmr'
  CC      arch/powerpc/kernel/io.o
{standard input}: Assembler messages:
{standard input}:376: Error: unrecognized opcode: `mbar'
...
  CC      arch/powerpc/mm/nohash/book3e_hugetlbpage.o
{standard input}: Assembler messages:
{standard input}:291: Error: unrecognized opcode: `tlbsx'
{standard input}:482: Error: unrecognized opcode: `tlbwe'
{standard input}:608: Error: unrecognized opcode: `lbarx'
{standard input}:608: Error: unrecognized opcode: `stbcx.'

-mpcu=powerpc64 cannot be used anymore for book3e, it must be a booke CPU.

But then we get:

  CC      arch/powerpc/lib/xor_vmx.o
cc1: error: AltiVec not supported in this target

Altivec is not supported with -mcpu=e5500 so don't allow selection
of altivec when e5500 is selected.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/77255a5a957967723b84d0356d9e5fb21569f4e8.1657549153.git.christophe.leroy@csgroup.eu

powerpc/44x: Fix build failure with GCC 12 (unrecognized opcode: `wrteei')

Building ppc40x_defconfig leads to following error

  CC      arch/powerpc/kernel/idle.o
{standard input}: Assembler messages:
{standard input}:67: Error: unrecognized opcode: `wrteei'
{standard input}:78: Error: unrecognized opcode: `wrteei'

Add -mcpu=440 by default and alternatively 464 and 476.

Once that's done, -mcpu=powerpc is only for book3s/32 now.

But then comes

  CC      arch/powerpc/kernel/io.o
{standard input}: Assembler messages:
{standard input}:198: Error: unrecognized opcode: `eieio'
{standard input}:230: Error: unrecognized opcode: `eieio'
{standard input}:245: Error: unrecognized opcode: `eieio'
{standard input}:254: Error: unrecognized opcode: `eieio'
{standard input}:273: Error: unrecognized opcode: `eieio'
{standard input}:396: Error: unrecognized opcode: `eieio'
{standard input}:404: Error: unrecognized opcode: `eieio'
{standard input}:423: Error: unrecognized opcode: `eieio'
{standard input}:512: Error: unrecognized opcode: `eieio'
{standard input}:520: Error: unrecognized opcode: `eieio'
{standard input}:539: Error: unrecognized opcode: `eieio'
{standard input}:628: Error: unrecognized opcode: `eieio'
{standard input}:636: Error: unrecognized opcode: `eieio'
{standard input}:655: Error: unrecognized opcode: `eieio'

Fix it by replacing eieio by mbar on booke.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b0d982e223314ed82ab959f5d4ad2c4c00bedb99.1657549153.git.christophe.leroy@csgroup.eu

powerpc/405: Fix build failure with GCC 12 (unrecognized opcode: `wrteei')

Building ppc40x_defconfig leads to following error

  CC      arch/powerpc/kernel/process.o
{standard input}: Assembler messages:
{standard input}:626: Error: unrecognized opcode: `wrteei'

Add -mcpu=405 by default.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d344a42c99061cfe10a28e00de4e31a1363f4251.1657549153.git.christophe.leroy@csgroup.eu

powerpc/32: Don't always pass -mcpu=powerpc to the compiler

Since commit 4bf4f42a2feb ("powerpc/kbuild: Set default generic
machine type for 32-bit compile"), when building a 32 bits kernel
with a bi-arch version of GCC, or when building a book3s/32 kernel,
the option -mcpu=powerpc is passed to GCC at all time, relying on it
being eventually overriden by a subsequent -mcpu=xxxx.

But when building the same kernel with a 32 bits only version of GCC,
that is not done, relying on gcc being built with the expected default
CPU.

This logic has two problems. First, it is a bit fragile to rely on
whether the GCC version is bi-arch or not, because today we can have
bi-arch versions of GCC configured with a 32 bits default. Second,
there are some versions of GCC which don't support -mcpu=powerpc,
for instance for e500 SPE-only versions.

So, stop relying on this approximative logic and allow the user to
decide whether he/she wants to use the toolchain's default CPU or if
he/she wants to set one, and allow only possible CPUs based on the
selected target.

Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d4df724691351531bf46d685d654689e5dfa0d74.1657549153.git.christophe.leroy@csgroup.eu

powerpc/32: Do not allow selection of e5500 or e6500 CPUs on PPC32

Commit 0e00a8c9fd92 ("powerpc: Allow CPU selection also on PPC32")
enlarged the CPU selection logic to PPC32 by removing depend to
PPC64, and failed to restrict that depend to E5500_CPU and E6500_CPU.
Fortunately that got unnoticed because -mcpu=8540 will override the
-mcpu=e500mc64 or -mpcu=e6500 as they are ealier, but that's
fragile and may no be right in the future.

Add back the depend PPC64 on E5500_CPU and E6500_CPU.

Fixes: 0e00a8c9fd92 ("powerpc: Allow CPU selection also on PPC32")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8abab4888da69ff78b73a56f64d9678a7bf684e9.1657549153.git.christophe.leroy@csgroup.eu

powerpc/ppc-opcode: Define and use PPC_RAW_SETB()

We have PPC_INST_SETB then build the 'setb' instruction in the
user.

Instead, define PPC_RAW_SETB() and use it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b08a4f26919a8f8cdcf7544ab552d9c1c63418b5.1657205708.git.christophe.leroy@csgroup.eu

powerpc/ppc-opcode: Define and use PPC_RAW_TRAP() and PPC_RAW_TW()

Add and use PPC_RAW_TRAP() instead of opencoding.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/52c7e522e56a38e3ff0363906919445920005a8f.1657205708.git.christophe.leroy@csgroup.eu

powerpc/probes: Remove ppc_opcode_t

ppc_opcode_t is just an u32. There is no point in hiding u32
behind such a typedef. Remove it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b2d762191b095530789ac8b71b167c6740bb6aed.1657205708.git.christophe.leroy@csgroup.eu

powerpc: Remove remaining parts of oprofile

Commit 9850b6c69356 ("arch: powerpc: Remove oprofile") removed
oprofile.

Remove all remaining parts of it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/298432fe1a14c0a415760011d72c3f0999efd5e2.1657204631.git.christophe.leroy@csgroup.eu

powerpc/perf: Use PVR rather than oprofile field to determine CPU version

Currently the perf CPU backend drivers detect what CPU they're on using
cur_cpu_spec->oprofile_cpu_type.

Although that works, it's a bit crufty to be using oprofile related fields,
especially seeing as oprofile is more or less unused these days.

It also means perf is reliant on the fragile logic in setup_cpu_spec()
which detects when we're using a logical PVR and copies back the PMU
related fields from the raw CPU entry. So lets check the PVR directly.

Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[chleroy: Added power10 and fixed checkpatch issues]
Reviewed-and-tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-and-tested-By: Kajol Jain <kjain@linux.ibm.com> [For 24x7 side changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20c0ee7f99dbf0dbf8658df6b39f84753e6db1ef.1657204631.git.christophe.leroy@csgroup.eu

powerpc/32s: Fix boot failure with KASAN + SMP + JUMP_LABEL_FEATURE_CHECK_DEBUG

Since commit 4291d085b0b0 ("powerpc/32s: Make pte_update() non
atomic on 603 core"), pte_update() has been using
mmu_has_feature(MMU_FTR_HPTE_TABLE) to avoid a useless atomic
operation on 603 cores.

When kasan_early_init() sets up the early zero shadow, it uses
__set_pte_at(). On book3s/32, __set_pte_at() calls pte_update()
when CONFIG_SMP is selected in order to ensure the preservation of
_PAGE_HASHPTE in case of concurrent update of the PTE. But that's
too early for mmu_has_feature(), so when
CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG is selected, mmu_has_feature()
calls printk(). That's too early to call printk() because KASAN
early zero shadow page is not set up yet. It leads to a deadlock.

However, when kasan_early_init() is called, there is only one CPU
running and no risk of concurrent PTE update. So __set_pte_at() can
be called with the 'percpu' flag. With that flag set, the PTE is
written directly instead of being written via pte_update().

Fixes: 4291d085b0b0 ("powerpc/32s: Make pte_update() non atomic on 603 core")
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2ee707512b8b212b079b877f4ceb525a1606a3fb.1656655567.git.christophe.leroy@csgroup.eu

powerpc/32: Set an IBAT covering up to _einittext during init

Always set an IBAT covering up to _einittext during init because when
CONFIG_MODULES is not selected there is no reason to have an exception
handler for kernel instruction TLB misses.

It implies DBAT and IBAT are now totaly independent, IBATs are set
by setibat() and DBAT by setbat().

This allows to revert commit 9bb162fa26ed ("powerpc/603: Fix
boot failure with DEBUG_PAGEALLOC and KFENCE")

Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ce7f04a39593934d9b1ee68c69144ccd3d4da4a1.1655202804.git.christophe.leroy@csgroup.eu

powerpc/32: Call mmu_mark_initmem_nx() regardless of data block mapping.

mark_initmem_nx() calls either mmu_mark_initmem_nx() or
set_memory_attr() based on return from v_block_mapped()
of _sinittext.

But we can now handle text and data independently, so that
text may be mapped by block even when data is mapped by pages.

On the 8xx for instance, at startup 32Mbytes of memory are
pinned in TLB. So the pinned entries need to go away for sinittext.

In next patch a BAT will be set to also covers sinittext on book3s/32.
So it will also be needed to call mmu_mark_initmem_nx() even when
data above sinittext is not mapped with BATs.

As this is highly dependent on the platform, call mmu_mark_initmem_nx()
regardless of data block mapping. Then the platform will know what to
do.

Modify 8xx mmu_mark_initmem_nx() so that inittext mapping is modified
only when pagealloc debug and kfence are not active, otherwise inittext
is mapped with standard pages. And don't do anything on kernel text
which is already mapped with PAGE_KERNEL_TEXT.

Fixes: da1adea07576 ("powerpc/8xx: Allow STRICT_KERNEL_RwX with pinned TLB")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/db3fc14f3bfa6215b0786ef58a6e2bc1e1f964d7.1655202804.git.christophe.leroy@csgroup.eu

powerpc/mce: use early_cpu_to_node() in mce_init()

cpu_to_node() is not yet available (setup_arch() is called before
setup_per_cpu_areas() by start_kernel()).

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220711030653.150950-1-npiggin@gmail.com

powerpc/64s: Remove spurious fault flushing for NMMU

Commit 6d8278c414cb2 ("powerpc/64s/radix: do not flush TLB on spurious
fault") removed the TLB flush for spurious faults, except when a
coprocessor (nest MMU) maps the address space. This is not needed
because the NMMU workaround in the PTE permission upgrade paths
prevents PTEs existing with less restrictive access permissions than
their corresponding TLB entries have.

Remove it and replace with a comment.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220525022358.780745-4-npiggin@gmail.com

powerpc/64s: POWER10 nest MMU can upgrade PTE access authority without TLB flush

The nest MMU in POWER9 does not re-fetch the PTE in response to
permission mismatch, contrary to the architecture[*] and unlike the core
MMU. This requires a TLB flush before upgrading permissions of valid
PTEs, for any address space with a coprocessor attached.

Per (non-public) Nest MMU Workbook, POWER10 nest MMU conforms to the
architecture in this regard, so skip the workaround.

[*] See: Power ISA Version 3.1B, 6.10.1.2 Modifying a Translation Table
    Entry, Setting a Reference or Change Bit or Upgrading Access
    Authority (PTE Subject to Atomic Hardware Updates):

      "If the only change being made to a valid PTE that is subject to
       atomic hardware updates is to set the Reference or Change bit to
       1 or to upgrade access authority, a simpler sequence suffices
       because the translation hardware will refetch the PTE if an
       access is attempted for which the only problems were reference
       and/or change bits needing to be set or insufficient access
       authority."

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220525022358.780745-3-npiggin@gmail.com

powerpc/64s: POWER10 nest MMU does not require flush escalation workaround

Per (non-public) Nest MMU Workbook, POWER10 and POWER9P NMMU does not
cache PTEs in PWC, so does not require PWC flush to invalidate these
translations.

Skip the workaround on POWER10 and later.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220525022358.780745-2-npiggin@gmail.com

powerpc: add documentation for HWCAPs

Take the arm64 HWCAP documentation file and adjust it for powerpc.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
[mpe: Fix ARCH_2_05 comment, as noticed by Tulio.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220715012636.165948-1-npiggin@gmail.com

powerpc/vdso: Fix __kernel_sync_dicache sequence with coherent icache

Processors with coherent icache require the sequence sync ; icbi ; isync
to entire store->execute coherency. icbi (to any address) must be
executed to ensure isync flushes the pipeline. See "POWER9 Processor
User's Manual, 4.6.2.2 Instruction Cache Block Invalidate (icbi)" for
details.

__kernel_sync_dicache is missing icbi for the coherent icache path.
Add it.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220520123649.258440-1-npiggin@gmail.com

powerpc/pci: Add config option for using all 256 PCI buses

By default on PPC32 PCI bus numbers are unique across all PCI domains.
So a system could have only 256 PCI buses independently of available PCI
domains.

This is due to filling DT property pci-OF-bus-map which does not support
a multi-domain setup.

On all powerpc platforms except chrp and powermac there is no DT
property pci-OF-bus-map anymore and therefore it is possible on
non-chrp/powermac platforms to avoid this limitation of maximum number
of 256 PCI buses in a system even on multi-domain setup.

But avoiding this limitation would mean that all PCI and PCIe devices
would be present on completely different BDF addresses as every PCI
domain starts numbering PCI bueses from zero (instead of the last bus
number of previous enumerated PCI domain). Such change could break
existing software which expects fixed PCI bus numbers.

So add a new config option CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT which
enables this change. By default it is disabled. It causes the initial
value of hose->first_busno to be zero.

Signed-off-by: Pali Rohár <pali@kernel.org>
[mpe: Minor change log wording]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220706104308.5390-6-pali@kernel.org

powerpc/pci: Disable filling pci-OF-bus-map for non-chrp/powermac

Creating or filling pci-OF-bus-map property in the device-tree is
deprecated since May 2006 [1] and was used only in old platforms like
PowerMac.

Currently kernel code handles it only for chrp and powermac code. So
completely disable filling pci-OF-bus-map property for non-chrp and
non-powermac platforms.

[1] - https://lore.kernel.org/linuxppc-dev/1148016268.13249.14.camel@localhost.localdomain/

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220706104308.5390-5-pali@kernel.org

powerpc/pci: Hide pci_create_OF_bus_map() for non-chrp code

Function pci_create_OF_bus_map() is used only in chrp code.
So hide it from all other platforms.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220706104308.5390-4-pali@kernel.org

powerpc/pci: Make pcibios_make_OF_bus_map() static

Function pcibios_make_OF_bus_map() is used only in pci_32.c. So make it
static.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220706104308.5390-3-pali@kernel.org

powerpc/pci: Hide pci_device_from_OF_node() for non-powermac code

Function pci_device_from_OF_node() is used only in powermac code. So
hide it from all other platforms.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220706104308.5390-2-pali@kernel.org

powerpc: dts: turris1x.dts: Add CPLD reboot node

CPLD firmware can reset board by writing value 0x01 at CPLD memory offset
0x0d. Define syscon-reboot node for this reset support.

Fixes: 54c15ec3b738 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713134429.18748-1-pali@kernel.org

powerpc/fsl-pci: Fix Class Code of PCIe Root Port

By default old pre-3.0 Freescale PCIe controllers reports invalid PCI Class
Code 0x0b20 for PCIe Root Port. It can be seen by lspci -b output on P2020
board which has this pre-3.0 controller:

  $ lspci -bvnn
  00:00.0 Power PC [0b20]: Freescale Semiconductor Inc P2020E [1957:0070] (rev 21)
          !!! Invalid class 0b20 for header type 01
          Capabilities: [4c] Express Root Port (Slot-), MSI 00

Fix this issue by programming correct PCI Class Code 0x0604 for PCIe Root
Port to the Freescale specific PCIe register 0x474.

With this change lspci -b output is:

  $ lspci -bvnn
  00:00.0 PCI bridge [0604]: Freescale Semiconductor Inc P2020E [1957:0070] (rev 21) (prog-if 00 [Normal decode])
          Capabilities: [4c] Express Root Port (Slot-), MSI 00

Without any "Invalid class" error. So class code was properly reflected
into standard (read-only) PCI register 0x08.

Same fix is already implemented in U-Boot pcie_fsl.c driver in commit:
http://source.denx.de/u-boot/u-boot/-/commit/d18d06ac35229345a0af80977a408cfbe1d1015b

Fix activated by U-Boot stay active also after booting Linux kernel.
But boards which use older U-Boot version without that fix are affected and
still require this fix.

So implement this class code fix also in kernel fsl_pci.c driver.

Cc: stable@vger.kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220706101043.4867-1-pali@kernel.org

powerpc/purgatory: Omit use of bin2c

The .incbin assembler directive is much faster than bin2c + $(CC).

Do similar refactoring as in commit 4c0f032d4963 ("s390/purgatory:
Omit use of bin2c").

Please note the .quad directive matches to size_t in C (both 8 byte)
because the purgatory is compiled only for the 64-bit kernel.
(KEXEC_FILE depends on PPC64).

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220725015619.618070-1-masahiroy@kernel.org

powerpc/pseries/mobility: set NMI watchdog factor during an LPM

During an LPM, while the memory transfer is in progress on the arrival
side, some latencies are generated when accessing not yet transferred
pages on the arrival side. Thus, the NMI watchdog may be triggered too
frequently, which increases the risk to hit an NMI interrupt in a bad
place in the kernel, leading to a kernel panic.

Disabling the Hard Lockup Watchdog until the memory transfer could be a
too strong work around, some users would want this timeout to be
eventually triggered if the system is hanging even during an LPM.

Introduce a new sysctl variable nmi_watchdog_factor. It allows to apply
a factor to the NMI watchdog timeout during an LPM. Just before the CPUs
are stopped for the switchover sequence, the NMI watchdog timer is set
to watchdog_thresh + factor%

A value of 0 has no effect. The default value is 200, meaning that the
NMI watchdog is set to 30s during LPM (based on a 10s watchdog_thresh
value). Once the memory transfer is achieved, the factor is reset to 0.

Setting this value to a high number is like disabling the NMI watchdog
during an LPM.

Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713154729.80789-5-ldufour@linux.ibm.com

powerpc/watchdog: introduce a NMI watchdog's factor

Introduce a factor which would apply to the NMI watchdog timeout.

This factor is a percentage added to the watchdog_tresh value. The value is
set under the watchdog_mutex protection and lockup_detector_reconfigure()
is called to recompute wd_panic_timeout_tb.

Once the factor is set, it remains until it is set back to 0, which means
no impact.

Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713154729.80789-4-ldufour@linux.ibm.com

watchdog: export lockup_detector_reconfigure

In some circumstances it may be interesting to reconfigure the watchdog
from inside the kernel.

On PowerPC, this may helpful before and after a LPAR migration (LPM) is
initiated, because it implies some latencies, watchdog, and especially NMI
watchdog is expected to be triggered during this operation. Reconfiguring
the watchdog with a factor, would prevent it to happen too frequently
during LPM.

Rename lockup_detector_reconfigure() as __lockup_detector_reconfigure() and
create a new function lockup_detector_reconfigure() calling
__lockup_detector_reconfigure() under the protection of watchdog_mutex.

Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
[mpe: Squash in build fix from Laurent, reported by Sachin]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713154729.80789-3-ldufour@linux.ibm.com

powerpc/mobility: wait for memory transfer to complete

In pseries_migration_partition(), loop until the memory transfer is
complete. This way the calling drmgr process will not exit earlier,
allowing callbacks to be run only once the migration is fully completed.

If reading the VASI state is done after the hypervisor has completed the
migration, the HCALL is returning H_PARAMETER. We can safely assume that
the memory transfer is achieved if this happens.

This will also allow to manage the NMI watchdog state in the next commits.

Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713154729.80789-2-ldufour@linux.ibm.com

selftests/powerpc/ptrace: Add peek/poke of FPRs

Currently the ptrace-gpr test only tests the GET/SET(FP)REGS ptrace
APIs. But there's an alternate (older) API, called PEEK/POKEUSR.

Add some minimal testing of PEEK/POKEUSR of the FPRs. This is sufficient
to detect the bug that was fixed recently in the 32-bit ptrace FPR
handling.

Depends-on: 8e1278444446 ("powerpc/32: Fix overread/overwrite of thread_struct via ptrace")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-13-mpe@ellerman.id.au

selftests/powerpc/ptrace: Use more interesting values

The ptrace-gpr test uses fixed values to test that registers can be
read/written via ptrace. In particular it sets all GPRs to 1, which
means the test could miss some types of bugs - eg. if the kernel was
only returning the low word.

So generate some random values at startup and use those instead.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-12-mpe@ellerman.id.au

selftests/powerpc/ptrace: Make child errors more obvious

Use the FAIL_IF() macro so that errors in the child report a line
number, rather than just silently exiting.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-11-mpe@ellerman.id.au

selftests/powerpc/ptrace: Do more of ptrace-gpr in asm

The ptrace-gpr test includes some inline asm to load GPR and FPR
registers. It then goes back to C to wait for the parent to trace it and
then checks register contents.

The split between inline asm and C is fragile, it relies on the compiler
not using any non-volatile GPRs after the inline asm block. It also
requires a very large and unwieldy inline asm block.

So convert the logic to set registers, wait, and store registers to a
single asm function, meaning there's no window for the compiler to
intervene.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-10-mpe@ellerman.id.au

selftests/powerpc/ptrace: Build the ptrace-gpr test as 32-bit when possible

The ptrace-gpr test can now be built 32-bit, so do that if that's the
compiler default rather than forcing a 64-bit build.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-9-mpe@ellerman.id.au

selftests/powerpc/ptrace: Convert to load/store doubles

Some of the ptrace tests check the contents of floating pointer
registers. Currently these use float, which is always 4 bytes, but the
ptrace API supports saving/restoring 8 bytes per register, so switch to
using doubles to exercise the code more fully.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-8-mpe@ellerman.id.au

selftests/powerpc/ptrace: Drop unused load_fpr_single_precision()

This function is never called, drop it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-7-mpe@ellerman.id.au

selftests/powerpc: Add 32-bit support to asm helpers

Add support for 32-bit builds to the asm helpers.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-6-mpe@ellerman.id.au

selftests/powerpc: Don't save TOC by default in asm helpers

Thare are some asm helpers for creating/popping stack frames in
basic_asm.h. They always save/restore r2 (TOC pointer), but none of the
selftests change r2, so it's unnecessary to save it by default.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-5-mpe@ellerman.id.au

selftests/powerpc: Don't save CR by default in asm helpers

Thare are some asm helpers for creating/popping stack frames in
basic_asm.h. They always save/restore CR, but none of the selftests
tests touch non-volatile CR fields, so it's unnecessary to save them by
default.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-4-mpe@ellerman.id.au

selftests/powerpc/ptrace: Split CFLAGS better

Currently all ptrace tests are built 64-bit and with TM enabled.

Only the TM tests need TM enabled, so split those out into a separate
variable so that can be specified precisely.

Split the rest of the tests into a variable, and add -m64 to CFLAGS for
those tests, so that in a subsequent patch some tests can be made to
build 32-bit.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-3-mpe@ellerman.id.au

selftests/powerpc/ptrace: Set LOCAL_HDRS

Set LOCAL_HDRS so header changes cause rebuilds. The lib.mk logic adds
all the headers in LOCAL_HDRS as dependencies, so there's no need to
also list them explicitly.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-2-mpe@ellerman.id.au

selftests/powerpc: Ensure 16-byte stack pointer alignment

The PUSH/POP_BASIC_STACK helpers in basic_asm.h do not ensure that the
stack pointer is always 16-byte aligned, which is required per the ABI.

Fix the macros to do the alignment if the caller fails to.

Currently only one caller passes a non-aligned size, tm_signal_self(),
which hasn't been caught in testing, presumably because it's a leaf
function.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-1-mpe@ellerman.id.au

powerpc: Fix all occurences of duplicate words

Since commit 87c78b612f4f ("powerpc: Fix all occurences of "the the"")
fixed "the the", there's now a steady stream of patches fixing other
duplicate words.

Just fix them all at once, to save the overhead of dealing with
individual patches for each case.

This leaves a few cases of "that that", which in some contexts is
correct.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220718095158.326606-1-mpe@ellerman.id.au

Merge branch 'fixes' into next

Bring in a build fix for GCC12 from our fixes branch.

powerpc/kvm: Remove comment related to moving PMU code to perf subsystem

Commit aabcaf6ae2a0 ("KVM: PPC: Book3S HV P9: Move host OS save/restore
functions to  built-in") added a comment in switch_pmu_to_guest
function, indicating possibility of moving PMU handling code
to perf subsystem. But perf subsystem code compilation depends upon
the enablement of CONFIG_PERF_EVENTS whereas, kvm code don't have
any dependency on this config.
Patch remove this comment as switch_pmu_to_guest functionality is
needed even if perf subsystem is disabled.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220711034927.213192-2-kjain@linux.ibm.com

powerpc/kvm: Move pmu code in kvm folder to separate file for power9 and later platforms

File book3s_hv_p9_entry.c in powerpc/kvm folder consists of functions
like freeze_pmu, switch_pmu_to_guest and switch_pmu_to_host which are
specific to Performance Monitoring Unit(PMU) for power9 and later
platforms.

For better maintenance, moving pmu related code from
book3s_hv_p9_entry.c to a new file called book3s_hv_p9_perf.c,
without any logic change.
Also make corresponding changes in the Makefile to include
book3s_hv_p9_perf.c during compilation.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220711034927.213192-1-kjain@linux.ibm.com

KVM: PPC: Book3s HV: Remove unused function kvmppc_bad_interrupt

The commit fae5c9f3664b ("KVM: PPC: Book3S HV: remove ISA v3.0 and v3.1
support from P7/8 path") removed the last reference to the function.

Fixes: fae5c9f3664b ("KVM: PPC: Book3S HV: remove ISA v3.0 and v3.1 support from P7/8 path")
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220711223617.63625-3-muriloo@linux.ibm.com

KVM: PPC: Book3S HV: Remove kvmhv_p9_[set,restore]_lpcr declarations

The commit b1b1697ae0cc ("KVM: PPC: Book3S HV: Remove support for
running HPT guest on RPT host without mixed mode support") removed the
last references to these functions.

Fixes: b1b1697ae0cc ("KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support")
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220711223617.63625-2-muriloo@linux.ibm.com

macintosh/adb: fix oob read in do_adb_query() function

In do_adb_query() function of drivers/macintosh/adb.c, req->data is copied
form userland. The parameter "req->data[2]" is missing check, the array
size of adb_handler[] is 16, so adb_handler[req->data[2]].original_address and
adb_handler[req->data[2]].handler_id will lead to oob read.

Cc: stable <stable@kernel.org>
Signed-off-by: Ning Qiang <sohu0106@126.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713153734.2248-1-sohu0106@126.com

watchdog/pseries-wdt: initial support for H_WATCHDOG-based watchdog timers

PAPR v2.12 defines a new hypercall, H_WATCHDOG.  The hypercall permits
guest control of one or more virtual watchdog timers.  The timers have
millisecond granularity.  The guest is terminated when a timer
expires.

This patch adds a watchdog driver for these timers, "pseries-wdt".

pseries_wdt_probe() currently assumes the existence of only one
platform device and always assigns it watchdogNumber 1.  If we ever
expose more than one timer to userspace we will need to devise a way
to assign a distinct watchdogNumber to each platform device at device
registration time.

Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713202335.1217647-5-cheloha@linux.ibm.com

powerpc/pseries: register pseries-wdt device with platform bus

PAPR v2.12 defines a new hypercall, H_WATCHDOG.  The hypercall permits
guest control of one or more virtual watchdog timers.

These timers do not conform to PowerPC device conventions.  They are
not affixed to any extant bus, nor do they have full representation in
the device tree.

As a workaround we represent them as platform devices.

This patch registers a single platform device, "pseries-wdt", with the
platform bus if the FW_FEATURE_WATCHDOG flag is set.

A driver for this device, "pseries-wdt", will be introduced in a
subsequent patch.

Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713202335.1217647-4-cheloha@linux.ibm.com

powerpc/pseries: add FW_FEATURE_WATCHDOG flag

PAPR v2.12 specifies a new optional function set, "hcall-watchdog",
for the /rtas/ibm,hypertas-functions property.  The presence of this
function set indicates support for the H_WATCHDOG hypercall.

Check for this function set and, if present, set the new
FW_FEATURE_WATCHDOG flag.

Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713202335.1217647-3-cheloha@linux.ibm.com

powerpc/pseries: hvcall.h: add H_WATCHDOG opcode, H_NOOP return code

PAPR v2.12 defines a new hypercall, H_WATCHDOG.  The hypercall permits
guest control of one or more virtual watchdog timers.

Add the opcode for the H_WATCHDOG hypercall to hvcall.h.  While here,
add a definition for H_NOOP, a possible return code for H_WATCHDOG.

Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713202335.1217647-2-cheloha@linux.ibm.com

powerpc/64s: Disable stack variable initialisation for prom_init

With GCC 12 allmodconfig prom_init fails to build:

  Error: External symbol 'memset' referenced from prom_init.c
  make[2]: *** [arch/powerpc/kernel/Makefile:204: arch/powerpc/kernel/prom_init_check] Error 1

The allmodconfig build enables KASAN, so all calls to memset in
prom_init should be converted to __memset by the #ifdefs in
asm/string.h, because prom_init must use the non-KASAN instrumented
versions.

The build failure happens because there's a call to memset that hasn't
been caught by the pre-processor and converted to __memset. Typically
that's because it's a memset generated by the compiler itself, and that
is the case here.

With GCC 12, allmodconfig enables CONFIG_INIT_STACK_ALL_PATTERN, which
causes the compiler to emit memset calls to initialise on-stack
variables with a pattern.

Because prom_init is non-user-facing boot-time only code, as a
workaround just disable stack variable initialisation to unbreak the
build.

Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220718134418.354114-1-mpe@ellerman.id.au

powerpc/52xx: Mark gpt driver as not removable

Returning an error code (here -EBUSY) from a remove callback doesn't
prevent the driver from being unloaded. The only effect is that an error
message is emitted and the driver is removed anyhow.

So instead drop the remove function (which is equivalent to returning zero)
and set the suppress_bind_attrs property to make it impossible to unload
the driver via sysfs.

This is a preparation for making platform remove callbacks return void.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220612213400.159257-1-u.kleine-koenig@pengutronix.de

docs: ABI: sysfs-bus-event_source-devices: Document sysfs caps entry for PMU

Details is added about "caps" attribute group in the ABI documentation.
This is used to expose some of the PMU attributes in "caps"
directory under : /sys/bus/event_source/devices/<dev>/. The dev/caps
will contain information about features that platform specific PMU
supports.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220520084630.15181-2-atrajeev@linux.vnet.ibm.com

powerpc/perf: Add support for caps under sysfs in powerpc

Add caps support under "/sys/bus/event_source/devices/<pmu>/"
for powerpc. This directory can be used to expose some of the
specific features that powerpc PMU supports to the user.
Example: pmu_name. The name of PMU registered will depend on
platform, say power9 or power10 or it could be Generic Compat
PMU.

Currently the only way to know which is the registered
PMU is from the dmesg logs. But clearing the dmesg will make it
difficult to know exact PMU backend used. And even extracting
from dmesg will be complicated, as we need  to parse the dmesg
logs and add filters for pmu name. Whereas by exposing it via
caps will make it easy as we just need to directly read it from
the sysfs.

Add a caps directory to /sys/bus/event_source/devices/cpu/
for power8, power9, power10 and generic compat PMU in respective
PMU driver code. Update the pmu_name file under caps folder
in core-book3s using "attr_update".

The information exposed currently:
 - pmu_name : Underlying PMU name from the driver

Example result with power9 pmu:

 # ls /sys/bus/event_source/devices/cpu/caps
pmu_name

 # cat /sys/bus/event_source/devices/cpu/caps/pmu_name
POWER9

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220520084630.15181-1-atrajeev@linux.vnet.ibm.com

powerpc/perf: Give generic PMU a nice name

When booting on a machine that uses the compat pmu driver we see this:

 [    0.071192] GENERIC_COMPAT performance monitor hardware support registered

Which is a bit shouty. Give it a nicer name.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610044006.2095806-1-joel@jms.id.au

Merge branch 'topic/ppc-kvm' into next

Merge KVM related commits we are keeping in a topic branch in case of
any conflicts with generic KVM changes.

Merge branch 'fixes' into next

Merge our fixes branch. In particular this brings in commit
986481618023 ("powerpc/book3e: Fix PUD allocation size in
map_kernel_page()") which fixes a build failure in next, because commit
2db2008e6363 ("powerpc/64e: Rewrite p4d_populate() as a static inline
function") depends on it.

powerpc/powernv: delay rng platform device creation until later in boot

The platform device for the rng must be created much later in boot.
Otherwise it tries to connect to a parent that doesn't yet exist,
resulting in this splat:

  [    0.000478] kobject: '(null)' ((____ptrval____)): is not initialized, yet kobject_get() is being called.
  [    0.002925] [c000000002a0fb30] [c00000000073b0bc] kobject_get+0x8c/0x100 (unreliable)
  [    0.003071] [c000000002a0fba0] [c00000000087e464] device_add+0xf4/0xb00
  [    0.003194] [c000000002a0fc80] [c000000000a7f6e4] of_device_add+0x64/0x80
  [    0.003321] [c000000002a0fcb0] [c000000000a800d0] of_platform_device_create_pdata+0xd0/0x1b0
  [    0.003476] [c000000002a0fd00] [c00000000201fa44] pnv_get_random_long_early+0x240/0x2e4
  [    0.003623] [c000000002a0fe20] [c000000002060c38] random_init+0xc0/0x214

This patch fixes the issue by doing the platform device creation inside
of machine_subsys_initcall.

Fixes: f3eac426657d ("powerpc/powernv: wire up rng during setup_arch")
Cc: stable@vger.kernel.org
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
[mpe: Change "of node" to "platform device" in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220630121654.1939181-1-Jason@zx2c4.com

powerpc/memhotplug: Add add_pages override for PPC

With commit ffa0b64e3be5 ("powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit")
the kernel now validate the addr against high_memory value. This results
in the below BUG_ON with dax pfns.

[  635.798741][T26531] kernel BUG at mm/page_alloc.c:5521!
1:mon> e
cpu 0x1: Vector: 700 (Program Check) at [c000000007287630]
    pc: c00000000055ed48: free_pages.part.0+0x48/0x110
    lr: c00000000053ca70: tlb_finish_mmu+0x80/0xd0
    sp: c0000000072878d0
   msr: 800000000282b033
  current = 0xc00000000afabe00
  paca    = 0xc00000037ffff300   irqmask: 0x03   irq_happened: 0x05
    pid   = 26531, comm = 50-landscape-sy
kernel BUG at :5521!
Linux version 5.19.0-rc3-14659-g4ec05be7c2e1 (kvaneesh@ltc-boston8) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #625 SMP Thu Jun 23 00:35:43 CDT 2022
1:mon> t
[link register   ] c00000000053ca70 tlb_finish_mmu+0x80/0xd0
[c0000000072878d0] c00000000053ca54 tlb_finish_mmu+0x64/0xd0 (unreliable)
[c000000007287900] c000000000539424 exit_mmap+0xe4/0x2a0
[c0000000072879e0] c00000000019fc1c mmput+0xcc/0x210
[c000000007287a20] c000000000629230 begin_new_exec+0x5e0/0xf40
[c000000007287ae0] c00000000070b3cc load_elf_binary+0x3ac/0x1e00
[c000000007287c10] c000000000627af0 bprm_execve+0x3b0/0xaf0
[c000000007287cd0] c000000000628414 do_execveat_common.isra.0+0x1e4/0x310
[c000000007287d80] c00000000062858c sys_execve+0x4c/0x60
[c000000007287db0] c00000000002c1b0 system_call_exception+0x160/0x2c0
[c000000007287e10] c00000000000c53c system_call_common+0xec/0x250

The fix is to make sure we update high_memory on memory hotplug.
This is similar to what x86 does in commit 3072e413e305 ("mm/memory_hotplug: introduce add_pages")

Fixes: ffa0b64e3be5 ("powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220629050925.31447-1-aneesh.kumar@linux.ibm.com

powerpc/bpf: Fix use of user_pt_regs in uapi

Trying to build a .c file that includes <linux/bpf_perf_event.h>:
  $ cat test_bpf_headers.c
  #include <linux/bpf_perf_event.h>

throws the below error:
  /usr/include/linux/bpf_perf_event.h:14:28: error: field ‘regs’ has incomplete type
     14 |         bpf_user_pt_regs_t regs;
|                            ^~~~

This is because we typedef bpf_user_pt_regs_t to 'struct user_pt_regs'
in arch/powerpc/include/uaps/asm/bpf_perf_event.h, but 'struct
user_pt_regs' is not exposed to userspace.

Powerpc has both pt_regs and user_pt_regs structures. However, unlike
arm64 and s390, we expose user_pt_regs to userspace as just 'pt_regs'.
As such, we should typedef bpf_user_pt_regs_t to 'struct pt_regs' for
userspace.

Within the kernel though, we want to typedef bpf_user_pt_regs_t to
'struct user_pt_regs'.

Remove arch/powerpc/include/uapi/asm/bpf_perf_event.h so that the
uapi/asm-generic version of the header is exposed to userspace.
Introduce arch/powerpc/include/asm/bpf_perf_event.h so that we can
typedef bpf_user_pt_regs_t to 'struct user_pt_regs' for use within the
kernel.

Note that this was not showing up with the bpf selftest build since
tools/include/uapi/asm/bpf_perf_event.h didn't include the powerpc
variant.

Fixes: a6460b03f945ee ("powerpc/bpf: Fix broken uapi for BPF_PROG_TYPE_PERF_EVENT")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Use typical naming for header include guard]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627191119.142867-1-naveen.n.rao@linux.vnet.ibm.com