net: dsa: lantiq_gswip: fix use after free in gswip_remove()

commit 8c6ae46150a453f8ae9a6cd49b45f354f478587d upstream.

of_node_put(priv->ds->slave_mii_bus->dev.of_node) should be
done before mdiobus_free(priv->ds->slave_mii_bus).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 0d120dfb5d67 ("net: dsa: lantiq_gswip: don't use devres for mdiobus")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1644921768-26477-1-git-send-email-khoroshilov@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN

commit a2614140dc0f467a83aa3bb4b6ee2d6480a76202 upstream.

mv88e6xxx is special among DSA drivers in that it requires the VTU to
contain the VID of the FDB entry it modifies in
mv88e6xxx_port_db_load_purge(), otherwise it will return -EOPNOTSUPP.

Sometimes due to races this is not always satisfied even if external
code does everything right (first deletes the FDB entries, then the
VLAN), because DSA commits to hardware FDB entries asynchronously since
commit c9eb3e0f8701 ("net: dsa: Add support for learning FDB through
notification").

Therefore, the mv88e6xxx driver must close this race condition by
itself, by asking DSA to flush the switchdev workqueue of any FDB
deletions in progress, prior to exiting a VLAN.

Fixes: c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification")
Reported-by: Rafael Richter <rafael.richter@gin.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: lan9303: fix reset on probe

commit 6bb9681a43f34f2cab4aad6e2a02da4ce54d13c5 upstream.

The reset input to the LAN9303 chip is active low, and devicetree
gpio handles reflect this.  Therefore, the gpio should be requested
with an initial state of high in order for the reset signal to be
asserted.  Other uses of the gpio already use the correct polarity.

Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fianelil <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220209145454.19749-1-mans@mansr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: fix race in netlink owner interface destruction

commit f0a6fd1527067da537e9c48390237488719948ed upstream.

My previous fix here to fix the deadlock left a race where
the exact same deadlock (see the original commit referenced
below) can still happen if cfg80211_destroy_ifaces() already
runs while nl80211_netlink_notify() is still marking some
interfaces as nl_owner_dead.

The race happens because we have two loops here - first we
dev_close() all the netdevs, and then we destroy them. If we
also have two netdevs (first one need only be a wdev though)
then we can find one during the first iteration, close it,
and go to the second iteration -- but then find two, and try
to destroy also the one we didn't close yet.

Fix this by only iterating once.

Reported-by: Toke Høiland-Jørgensen <toke@redhat.com>
Fixes: ea6b2098dd02 ("cfg80211: fix locking in netlink owner interface destruction")
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220201130951.22093-1-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmfmac: firmware: Fix crash in brcm_alt_fw_path

commit 665408f4c3a5c83e712871daa062721624b2b79e upstream.

The call to brcm_alt_fw_path in brcmf_fw_get_firmwares is not protected
by a check to the validity of the fwctx->req->board_type pointer. This
results in a crash in strlcat when, for example, the WLAN chip is found
in a USB dongle.

Prevent the crash by adding the necessary check.

See: https://github.com/raspberrypi/linux/issues/4833

Fixes: 5ff013914c62 ("brcmfmac: firmware: Allow per-board firmware binaries")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220118154514.3245524-1-phil@raspberrypi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: mlme: check for null after calling kmemdup

commit a72c01a94f1d285a274219d36e2a17b4846c0615 upstream.

As the possible failure of the alloc, the ifmgd->assoc_req_ies might be
NULL pointer returned from kmemdup().
Therefore it might be better to free the skb and return error in order
to fail the association, like ieee80211_assoc_success().
Also, the caller, ieee80211_do_assoc(), needs to deal with the return
value from ieee80211_send_assoc().

Fixes: 4d9ec73d2b78 ("cfg80211: Report Association Request frame IEs in association events")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220105081559.2387083-1-jiasheng@iscas.ac.cn
[fix some paths to be errors, not success]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname"

commit 6aba04ee3263669b335458c4cf4c7d97d6940229 upstream.

This reverts commit 3710e80952cf2dc48257ac9f145b117b5f74e0a5.

Since idm_base and nicpm_base are still optional resources not present
on all platforms, this breaks the driver for everything except Northstar
2 (which has both).

The same change was already reverted once with 755f5738ff98 ("net:
broadcom: fix a mistake about ioremap resource").

So let's do it again.

Fixes: 3710e80952cf ("net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
[florian: Added comments to explain the resources are optional]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220216184634.2032460-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: per-netns exclusive flowlabel checks

commit 0b0dff5b3b98c5c7ce848151df9da0b3cdf0cc8b upstream.

Ipv6 flowlabels historically require a reservation before use.
Optionally in exclusive mode (e.g., user-private).

Commit 59c820b2317f ("ipv6: elide flowlabel check if no exclusive
leases exist") introduced a fastpath that avoids this check when no
exclusive leases exist in the system, and thus any flowlabel use
will be granted.

That allows skipping the control operation to reserve a flowlabel
entirely. Though with a warning if the fast path fails:

  This is an optimization. Robust applications still have to revert to
  requesting leases if the fast path fails due to an exclusive lease.

Still, this is subtle. Better isolate network namespaces from each
other. Flowlabels are per-netns. Also record per-netns whether
exclusive leases are in use. Then behavior does not change based on
activity in other netns.

Changes
  v2
    - wrap in IS_ENABLED(CONFIG_IPV6) to avoid breakage if disabled

Fixes: 59c820b2317f ("ipv6: elide flowlabel check if no exclusive leases exist")
Link: https://lore.kernel.org/netdev/MWHPR2201MB1072BCCCFCE779E4094837ACD0329@MWHPR2201MB1072.namprd22.prod.outlook.com/
Reported-by: Congyu Liu <liu3101@purdue.edu>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Tested-by: Congyu Liu <liu3101@purdue.edu>
Link: https://lore.kernel.org/r/20220215160037.1976072-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: mcast: use rcu-safe version of ipv6_get_lladdr()

commit 26394fc118d6115390bd5b3a0fb17096271da227 upstream.

Some time ago 8965779d2c0e ("ipv6,mcast: always hold idev->lock before mca_lock")
switched ipv6_get_lladdr() to __ipv6_get_lladdr(), which is rcu-unsafe
version. That was OK, because idev->lock was held for these codepaths.

In 88e2ca308094 ("mld: convert ifmcaddr6 to RCU") these external locks were
removed, so we probably need to restore the original rcu-safe call.

Otherwise, we occasionally get a machine crashed/stalled with the following
in dmesg:

[ 3405.966610][T230589] general protection fault, probably for non-canonical address 0xdead00000000008c: 0000 [#1] SMP NOPTI
[ 3405.982083][T230589] CPU: 44 PID: 230589 Comm: kworker/44:3 Tainted: G           O      5.15.19-cloudflare-2022.2.1 #1
[ 3405.998061][T230589] Hardware name: SUPA-COOL-SERV
[ 3406.009552][T230589] Workqueue: mld mld_ifc_work
[ 3406.017224][T230589] RIP: 0010:__ipv6_get_lladdr+0x34/0x60
[ 3406.025780][T230589] Code: 57 10 48 83 c7 08 48 89 e5 48 39 d7 74 3e 48 8d 82 38 ff ff ff eb 13 48 8b 90 d0 00 00 00 48 8d 82 38 ff ff ff 48 39 d7 74 22 <66> 83 78 32 20 77 1b 75 e4 89 ca 23 50 2c 75 dd 48 8b 50 08 48 8b
[ 3406.055748][T230589] RSP: 0018:ffff94e4b3fc3d10 EFLAGS: 00010202
[ 3406.065617][T230589] RAX: dead00000000005a RBX: ffff94e4b3fc3d30 RCX: 0000000000000040
[ 3406.077477][T230589] RDX: dead000000000122 RSI: ffff94e4b3fc3d30 RDI: ffff8c3a31431008
[ 3406.089389][T230589] RBP: ffff94e4b3fc3d10 R08: 0000000000000000 R09: 0000000000000000
[ 3406.101445][T230589] R10: ffff8c3a31430000 R11: 000000000000000b R12: ffff8c2c37887100
[ 3406.113553][T230589] R13: ffff8c3a39537000 R14: 00000000000005dc R15: ffff8c3a31431000
[ 3406.125730][T230589] FS:  0000000000000000(0000) GS:ffff8c3b9fc80000(0000) knlGS:0000000000000000
[ 3406.138992][T230589] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3406.149895][T230589] CR2: 00007f0dfea1db60 CR3: 000000387b5f2000 CR4: 0000000000350ee0
[ 3406.162421][T230589] Call Trace:
[ 3406.170235][T230589]  <TASK>
[ 3406.177736][T230589]  mld_newpack+0xfe/0x1a0
[ 3406.186686][T230589]  add_grhead+0x87/0xa0
[ 3406.195498][T230589]  add_grec+0x485/0x4e0
[ 3406.204310][T230589]  ? newidle_balance+0x126/0x3f0
[ 3406.214024][T230589]  mld_ifc_work+0x15d/0x450
[ 3406.223279][T230589]  process_one_work+0x1e6/0x380
[ 3406.232982][T230589]  worker_thread+0x50/0x3a0
[ 3406.242371][T230589]  ? rescuer_thread+0x360/0x360
[ 3406.252175][T230589]  kthread+0x127/0x150
[ 3406.261197][T230589]  ? set_kthread_struct+0x40/0x40
[ 3406.271287][T230589]  ret_from_fork+0x22/0x30
[ 3406.280812][T230589]  </TASK>
[ 3406.288937][T230589] Modules linked in: ... [last unloaded: kheaders]
[ 3406.476714][T230589] ---[ end trace 3525a7655f2f3b9e ]---

Fixes: 88e2ca308094 ("mld: convert ifmcaddr6 to RCU")
Reported-by: David Pinilla Caparros <dpini@cloudflare.com>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt

commit d95d6320ba7a51d61c097ffc3bcafcf70283414e upstream.

Because fib6_info_hw_flags_set() is called without any synchronization,
all accesses to gi6->offload, fi->trap and fi->offload_failed
need some basic protection like READ_ONCE()/WRITE_ONCE().

BUG: KCSAN: data-race in fib6_info_hw_flags_set / fib6_purge_rt

read to 0xffff8881087d5886 of 1 bytes by task 13953 on cpu 0:
 fib6_drop_pcpu_from net/ipv6/ip6_fib.c:1007 [inline]
 fib6_purge_rt+0x4f/0x580 net/ipv6/ip6_fib.c:1033
 fib6_del_route net/ipv6/ip6_fib.c:1983 [inline]
 fib6_del+0x696/0x890 net/ipv6/ip6_fib.c:2028
 __ip6_del_rt net/ipv6/route.c:3876 [inline]
 ip6_del_rt+0x83/0x140 net/ipv6/route.c:3891
 __ipv6_dev_ac_dec+0x2b5/0x370 net/ipv6/anycast.c:374
 ipv6_dev_ac_dec net/ipv6/anycast.c:387 [inline]
 __ipv6_sock_ac_close+0x141/0x200 net/ipv6/anycast.c:207
 ipv6_sock_ac_close+0x79/0x90 net/ipv6/anycast.c:220
 inet6_release+0x32/0x50 net/ipv6/af_inet6.c:476
 __sock_release net/socket.c:650 [inline]
 sock_close+0x6c/0x150 net/socket.c:1318
 __fput+0x295/0x520 fs/file_table.c:280
 ____fput+0x11/0x20 fs/file_table.c:313
 task_work_run+0x8e/0x110 kernel/task_work.c:164
 tracehook_notify_resume include/linux/tracehook.h:189 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:175 [inline]
 exit_to_user_mode_prepare+0x160/0x190 kernel/entry/common.c:207
 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline]
 syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300
 do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x44/0xae

write to 0xffff8881087d5886 of 1 bytes by task 1912 on cpu 1:
 fib6_info_hw_flags_set+0x155/0x3b0 net/ipv6/route.c:6230
 nsim_fib6_rt_hw_flags_set drivers/net/netdevsim/fib.c:668 [inline]
 nsim_fib6_rt_add drivers/net/netdevsim/fib.c:691 [inline]
 nsim_fib6_rt_insert drivers/net/netdevsim/fib.c:756 [inline]
 nsim_fib6_event drivers/net/netdevsim/fib.c:853 [inline]
 nsim_fib_event drivers/net/netdevsim/fib.c:886 [inline]
 nsim_fib_event_work+0x284f/0x2cf0 drivers/net/netdevsim/fib.c:1477
 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
 worker_thread+0x616/0xa70 kernel/workqueue.c:2454
 kthread+0x2c7/0x2e0 kernel/kthread.c:327
 ret_from_fork+0x1f/0x30

value changed: 0x22 -> 0x2a

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 1912 Comm: kworker/1:3 Not tainted 5.16.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events nsim_fib_event_work

Fixes: 0c5fcf9e249e ("IPv6: Add "offload failed" indication to routes")
Fixes: bb3c4ab93e44 ("ipv6: Add "offload" and "trap" indications to routes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Amit Cohen <amcohen@nvidia.com>
Cc: Ido Schimmel <idosch@nvidia.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220216173217.3792411-2-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: fix data races in fib_alias_hw_flags_set

commit 9fcf986cc4bc6a3a39f23fbcbbc3a9e52d3c24fd upstream.

fib_alias_hw_flags_set() can be used by concurrent threads,
and is only RCU protected.

We need to annotate accesses to following fields of struct fib_alias:

    offload, trap, offload_failed

Because of READ_ONCE()WRITE_ONCE() limitations, make these
field u8.

BUG: KCSAN: data-race in fib_alias_hw_flags_set / fib_alias_hw_flags_set

read to 0xffff888134224a6a of 1 bytes by task 2013 on cpu 1:
 fib_alias_hw_flags_set+0x28a/0x470 net/ipv4/fib_trie.c:1050
 nsim_fib4_rt_hw_flags_set drivers/net/netdevsim/fib.c:350 [inline]
 nsim_fib4_rt_add drivers/net/netdevsim/fib.c:367 [inline]
 nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:429 [inline]
 nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline]
 nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline]
 nsim_fib_event_work+0x1852/0x2cf0 drivers/net/netdevsim/fib.c:1477
 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
 process_scheduled_works kernel/workqueue.c:2370 [inline]
 worker_thread+0x7df/0xa70 kernel/workqueue.c:2456
 kthread+0x1bf/0x1e0 kernel/kthread.c:377
 ret_from_fork+0x1f/0x30

write to 0xffff888134224a6a of 1 bytes by task 4872 on cpu 0:
 fib_alias_hw_flags_set+0x2d5/0x470 net/ipv4/fib_trie.c:1054
 nsim_fib4_rt_hw_flags_set drivers/net/netdevsim/fib.c:350 [inline]
 nsim_fib4_rt_add drivers/net/netdevsim/fib.c:367 [inline]
 nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:429 [inline]
 nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline]
 nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline]
 nsim_fib_event_work+0x1852/0x2cf0 drivers/net/netdevsim/fib.c:1477
 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
 process_scheduled_works kernel/workqueue.c:2370 [inline]
 worker_thread+0x7df/0xa70 kernel/workqueue.c:2456
 kthread+0x1bf/0x1e0 kernel/kthread.c:377
 ret_from_fork+0x1f/0x30

value changed: 0x00 -> 0x02

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 4872 Comm: kworker/0:0 Not tainted 5.17.0-rc3-syzkaller-00188-g1d41d2e82623-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events nsim_fib_event_work

Fixes: 90b93f1b31f8 ("ipv4: Add "offload" and "trap" indications to routes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220216173217.3792411-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: netfilter: disable rp_filter on router

commit bbe4c0896d25009a7c86285d2ab024eed4374eea upstream.

Some distros may enable rp_filter by default. After ns1 change addr to
10.0.2.99 and set default router to 10.0.2.1, while the connected router
address is still 10.0.1.1. The router will not reply the arp request
from ns1. Fix it by setting the router's veth0 rp_filter to 0.

Before the fix:
  # ./nft_fib.sh
  PASS: fib expression did not cause unwanted packet drops
  Netns nsrouter-HQkDORO2 fib counter doesn't match expected packet count of 1 for 1.1.1.1
  table inet filter {
          chain prerouting {
                  type filter hook prerouting priority filter; policy accept;
                  ip daddr 1.1.1.1 fib saddr . iif oif missing counter packets 0 bytes 0 drop
                  ip6 daddr 1c3::c01d fib saddr . iif oif missing counter packets 0 bytes 0 drop
          }
  }

After the fix:
  # ./nft_fib.sh
  PASS: fib expression did not cause unwanted packet drops
  PASS: fib expression did drop packets for 1.1.1.1
  PASS: fib expression did drop packets for 1c3::c01d

Fixes: 82944421243e ("selftests: netfilter: add fib test case")
Signed-off-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_synproxy: unregister hooks on init error path

commit 2b4e5fb4d3776c391e40fb33673ba946dd96012d upstream.

Disable the IPv4 hooks if the IPv6 hooks fail to be registered.

Fixes: ad49d86e07a4 ("netfilter: nf_tables: Add synproxy support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: netfilter: fix exit value for nft_concat_range

commit 2e71ec1a725a794a16e3862791ed43fe5ba6a06b upstream.

When the nft_concat_range test failed, it exit 1 in the code
specifically.

But when part of, or all of the test passed, it will failed the
[ ${passed} -eq 0 ] check and thus exit with 1, which is the same
exit value with failure result. Fix it by exit 0 when passed is not 0.

Fixes: 611973c1e06f ("selftests: netfilter: Introduce tests for sets with range concatenation")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: don't send SAR GEO command for 3160 devices

commit 5f06f6bf8d816578c390a2b8a485d40adcca4749 upstream.

SAR GEO offsets are not supported on 3160 devices.  The code was
refactored and caused us to start sending the command anyway, which
causes a FW assertion failure.  Fix that only considering this feature
supported on FW API with major version is 17 if the device is not
3160.

Additionally, fix the caller of iwl_mvm_sar_geo_init() so that it
checks for the return value, which it was ignoring.

Reported-by: Len Brown <lenb@kernel.org>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: 78a19d5285d9 ("iwlwifi: mvm: Read the PPAG and SAR tables at INIT stage")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220128144623.96f683a89b42.I14e2985bfd7ddd8a8d83eb1869b800c0e7f30db4@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: pcie: gen2: fix locking when "HW not ready"

commit 4c29c1e27a1e178a219b3877d055e6dd643bdfda upstream.

If we run into this error path, we shouldn't unlock the mutex
since it's not locked since. Fix this in the gen2 code as well.

Fixes: eda50cde58de ("iwlwifi: pcie: add context information support")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220128142706.b8b0dfce16ef.Ie20f0f7b23e5911350a2766524300d2915e7b677@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: pcie: fix locking when "HW not ready"

commit e9848aed147708a06193b40d78493b0ef6abccf2 upstream.

If we run into this error path, we shouldn't unlock the mutex
since it's not locked since. Fix this.

Fixes: a6bd005fe92d ("iwlwifi: pcie: fix RF-Kill vs. firmware load race")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220128142706.5d16821d1433.Id259699ddf9806459856d6aefbdbe54477aecffd@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/ttm: tweak priority hint selection

commit 0bdc0a0699929c814a8aecd55d2accb8c11beae2 upstream.

For some reason we are selecting PRIO_HAS_PAGES when we don't have
mm.pages, and vice versa.

v2(Thomas):
  - Add missing fixes tag

Fixes: 213d50927763 ("drm/i915/ttm: Introduce a TTM i915 gem object backend")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209111652.468762-1-matthew.auld@intel.com
(cherry picked from commit ba2c5d15022a565da187d90e2fe44768e33e5034)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/gvt: Make DRM_I915_GVT depend on X86

commit d72d69abfdb6e0375981cfdda8eb45143f12c77d upstream.

GVT is not supported on non-x86 platforms, So add
dependency of X86 on config parameter DRM_I915_GVT.

Fixes: 0ad35fed618c ("drm/i915: gvt: Introduce the basic architecture of GVT-g")
Signed-off-by: Siva Mullati <siva.mullati@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220107095235.243448-1-siva.mullati@intel.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/cma-helper: Set VM_DONTEXPAND for mmap

commit 59f39bfa6553d598cb22f694d45e89547f420d85 upstream.

drm_gem_cma_mmap() cannot assume every implementation of dma_mmap_wc()
will end up calling remap_pfn_range() (which happens to set the relevant
vma flag, among others), so in order to make sure expectations around
VM_DONTEXPAND are met, let it explicitly set the flag like most other
GEM mmap implementations do.

This avoids repeated warnings on a small minority of systems where the
display is behind an IOMMU, and has a simple driver which does not
override drm_gem_cma_default_funcs. Arm hdlcd is an in-tree affected
driver. Out-of-tree, the Apple DCP driver is affected; this fix is
required for DCP to be mainlined.

[Alyssa: Update commit message.]

Fixes: c40069cb7bd6 ("drm: add mmap() to drm_gem_object_funcs")
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013143654.39031-1-alyssa@rosenzweig.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vsock: remove vsock from connected table when connect is interrupted by a signal

commit b9208492fcaecff8f43915529ae34b3bcb03877c upstream.

vsock_connect() expects that the socket could already be in the
TCP_ESTABLISHED state when the connecting task wakes up with a signal
pending. If this happens the socket will be in the connected table, and
it is not removed when the socket state is reset. In this situation it's
common for the process to retry connect(), and if the connection is
successful the socket will be added to the connected table a second
time, corrupting the list.

Prevent this by calling vsock_remove_connected() if a signal is received
while waiting for a connection. This is harmless if the socket is not in
the connected table, and if it is in the table then removing it will
prevent list corruption from a double add.

Note for backporting: this patch requires d5afa82c977e ("vsock: correct
removal of socket from the list"), which is in all current stable trees
except 4.9.y.

Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Seth Forshee <sforshee@digitalocean.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220217141312.2297547-1-sforshee@digitalocean.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix mbus join config lookup

commit 8d9d2a723d64b650f2e6423024ccb4a33f0cdc40 upstream.

The bogus loop from compute_dbuf_slices() was copied into
check_mbus_joined() as well. So this lookup is wrong as well.
Fix it.

Cc: stable@vger.kernel.org
Fixes: f4dc00863226 ("drm/i915/adl_p: MBUS programming")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220207132700.481-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 053f2b85631316a9226f6340c1c0fd95634f7a5b)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix dbuf slice config lookup

commit 698bef8ff5d2edea5d1c9d6e5adf1bfed1e8a106 upstream.

Apparently I totally fumbled the loop condition when I
removed the ARRAY_SIZE() stuff from the dbuf slice config
lookup. Comparing the loop index with the active_pipes bitmask
is utter nonsense, what we want to do is check to see if the
mask is zero or not.

Note that the code actually ended up working correctly despite
the fumble, up until commit eef173954432 ("drm/i915: Allow
!join_mbus cases for adlp+ dbuf configuration") when things
broke for real.

Cc: stable@vger.kernel.org
Fixes: 05e8155afe35 ("drm/i915: Use a sentinel to terminate the dbuf slice arrays")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220207132700.481-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit a28fde308c3c1c174249ff9559b57f24e6850086)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/opregion: check port number bounds for SWSCI display power state

commit ea958422291de248b9e2eaaeea36004e84b64043 upstream.

The mapping from enum port to whatever port numbering scheme is used by
the SWSCI Display Power State Notification is odd, and the memory of it
has faded. In any case, the parameter only has space for ports numbered
[0..4], and UBSAN reports bit shift beyond it when the platform has port
F or more.

Since the SWSCI functionality is supposed to be obsolete for new
platforms (i.e. ones that might have port F or more), just bail out
early if the mapped and mangled port number is beyond what the Display
Power State Notification can support.

Fixes: 9c4b0a683193 ("drm/i915: add opregion function to notify bios of encoder enable/disable")
Cc: <stable@vger.kernel.org> # v3.13+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4800
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cc363f42d6b5a5932b6d218fefcc8bdfb15dbbe5.1644489329.git.jani.nikula@intel.com
(cherry picked from commit 24a644ebbfd3b13cda702f98907f9dd123e34bf9)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: skipping SDMA hw_init and hw_fini for S0ix.

commit f8f4e2a518347063179def4e64580b2d28233d03 upstream.

[Why]
SDMA ring buffer test failed if suspend is aborted during
S0i3 resume.

[How]
If suspend is aborted for some reason during S0i3 resume
cycle, it follows SDMA ring test failing and errors in amdgpu
resume. For RN/CZN/Picasso, SMU saves and restores SDMA
registers during S0ix cycle. So, skipping SDMA suspend and
resume from driver solves the issue. This time, the system
is able to resume gracefully even the suspend is aborted.

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rajib Mahapatra <rajib.mahapatra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: correct the sequence of sending gpu reset msg

commit 9c4f59ea3f865693150edf0c91d1cc6b451360dd upstream.

the 2nd parameter should be smu msg type rather than asic msg index.

Fixes: 7d38d9dc4ecc ("drm/amdgpu: add mode2 reset support for yellow carp")
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/atomic: Don't pollute crtc_state->mode_blob with error pointers

commit 439cf34c8e0a8a33d8c15a31be1b7423426bc765 upstream.

Make sure we don't assign an error pointer to crtc_state->mode_blob
as that will break all kinds of places that assume either NULL or a
valid pointer (eg. drm_property_blob_put()).

Cc: stable@vger.kernel.org
Reported-by: fuyufan <fuyufan@huawei.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209091928.14766-1-ville.syrjala@linux.intel.com
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: Fix backlight control on iMac 12,1

commit 364438fd629f7611a84c8e6d7de91659300f1502 upstream.

The iMac 12,1 does not use the gmux driver for backlight, so the radeon
backlight device is needed to set the brightness.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1838
Signed-off-by: Nicholas Bishop <nicholasbishop@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: fix use-after-free

commit bea2662e7818e15d7607d17d57912ac984275d94 upstream.

If no firmware was present at all (or, presumably, all of the
firmware files failed to parse), we end up unbinding by calling
device_release_driver(), which calls remove(), which then in
iwlwifi calls iwl_drv_stop(), freeing the 'drv' struct. However
the new code I added will still erroneously access it after it
was freed.

Set 'failure=false' in this case to avoid the access, all data
was already freed anyway.

Cc: stable@vger.kernel.org
Reported-by: Stefan Agner <stefan@agner.ch>
Reported-by: Wolfgang Walter <linux@stwm.de>
Reported-by: Jason Self <jason@bluehome.net>
Reported-by: Dominik Behr <dominik@dominikbehr.com>
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Fixes: ab07506b0454 ("iwlwifi: fix leaks/bad data after failed firmware load")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220208114728.e6b514cf4c85.Iffb575ca2a623d7859b542c33b2a507d01554251@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: nSVM: mark vmcb01 as dirty when restoring SMM saved state

commit e8efa4ff00374d2e6f47f6e4628ca3b541c001af upstream.

While usually, restoring the smm state makes the KVM enter
the nested guest thus a different vmcb (vmcb02 vs vmcb01),
KVM should still mark it as dirty, since hardware
can in theory cache multiple vmcbs.

Failure to do so, combined with lack of setting the
nested_run_pending (which is fixed in the next patch),
might make KVM re-enter vmcb01, which was just exited from,
with completely different set of guest state registers
(SMM vs non SMM) and without proper dirty bits set,
which results in the CPU reusing stale IDTR pointer
which leads to a guest shutdown on any interrupt.

On the real hardware this usually doesn't happen,
but when running nested, L0's KVM does check and
honour few dirty bits, causing this issue to happen.

This patch fixes boot of hyperv and SMM enabled
windows VM running nested on KVM.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Message-Id: <20220207155447.840194-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: nSVM: fix potential NULL derefernce on nested migration

commit e1779c2714c3023e4629825762bcbc43a3b943df upstream.

Turns out that due to review feedback and/or rebases
I accidentally moved the call to nested_svm_load_cr3 to be too early,
before the NPT is enabled, which is very wrong to do.

KVM can't even access guest memory at that point as nested NPT
is needed for that, and of course it won't initialize the walk_mmu,
which is main issue the patch was addressing.

Fix this for real.

Fixes: 232f75d3b4b5 ("KVM: nSVM: call nested_svm_load_cr3 on nested state load")
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220207155447.840194-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: SVM: don't passthrough SMAP/SMEP/PKE bits in !NPT && !gCR0.PG case

commit c53bbe2145f51d3bc0438c2db02e737b9b598bf3 upstream.

When the guest doesn't enable paging, and NPT/EPT is disabled, we
use guest't paging CR3's as KVM's shadow paging pointer and
we are technically in direct mode as if we were to use NPT/EPT.

In direct mode we create SPTEs with user mode permissions
because usually in the direct mode the NPT/EPT doesn't
need to restrict access based on guest CPL
(there are MBE/GMET extenstions for that but KVM doesn't use them).

In this special "use guest paging as direct" mode however,
and if CR4.SMAP/CR4.SMEP are enabled, that will make the CPU
fault on each access and KVM will enter endless loop of page faults.

Since page protection doesn't have any meaning in !PG case,
just don't passthrough these bits.

The fix is the same as was done for VMX in commit:
commit 656ec4a4928a ("KVM: VMX: fix SMEP and SMAP without EPT")

This fixes the boot of windows 10 without NPT for good.
(Without this patch, BSP boots, but APs were stuck in endless
loop of page faults, causing the VM boot with 1 CPU)

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Message-Id: <20220207155447.840194-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: nSVM/nVMX: set nested_run_pending on VM entry which is a result of RSM

commit 759cbd59674a6c0aec616a3f4f0740ebd3f5fbef upstream.

While RSM induced VM entries are not full VM entries,
they still need to be followed by actual VM entry to complete it,
unlike setting the nested state.

This patch fixes boot of hyperv and SMM enabled
windows VM running nested on KVM, which fail due
to this issue combined with lack of dirty bit setting.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Message-Id: <20220207155447.840194-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86/xen: Fix runstate updates to be atomic when preempting vCPU

commit fcb732d8f8cf6084f8480015ad41d25fb023a4dd upstream.

There are circumstances whem kvm_xen_update_runstate_guest() should not
sleep because it ends up being called from __schedule() when the vCPU
is preempted:

[  222.830825]  kvm_xen_update_runstate_guest+0x24/0x100
[  222.830878]  kvm_arch_vcpu_put+0x14c/0x200
[  222.830920]  kvm_sched_out+0x30/0x40
[  222.830960]  __schedule+0x55c/0x9f0

To handle this, make it use the same trick as __kvm_xen_has_interrupt(),
of using the hva from the gfn_to_hva_cache directly. Then it can use
pagefault_disable() around the accesses and just bail out if the page
is absent (which is unlikely).

I almost switched to using a gfn_to_pfn_cache here and bailing out if
kvm_map_gfn() fails, like kvm_steal_time_set_preempted() does — but on
closer inspection it looks like kvm_map_gfn() will *always* fail in
atomic context for a page in IOMEM, which means it will silently fail
to make the update every single time for such guests, AFAICT. So I
didn't do it that way after all. And will probably fix that one too.

Cc: stable@vger.kernel.org
Fixes: 30b5c851af79 ("KVM: x86/xen: Add support for vCPU runstate information")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <b17a93e5ff4561e57b1238e3e7ccd0b613eb827e.camel@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: wake up /dev/random writers after zap

[ Upstream commit 042e293e16e3aa9794ce60c29f5b7b0c8170f933 ]

When account() is called, and the amount of entropy dips below
random_write_wakeup_bits, we wake up the random writers, so that they
can write some more in. However, the RNDZAPENTCNT/RNDCLEARPOOL ioctl
sets the entropy count to zero -- a potential reduction just like
account() -- but does not unblock writers. This commit adds the missing
logic to that ioctl to unblock waiting writers.

Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gcc-plugins/stackleak: Use noinstr in favor of notrace

[ Upstream commit dcb85f85fa6f142aae1fe86f399d4503d49f2b60 ]

While the stackleak plugin was already using notrace, objtool is now a
bit more picky.  Update the notrace uses to noinstr.  Silences the
following objtool warnings when building with:

CONFIG_DEBUG_ENTRY=y
CONFIG_STACK_VALIDATION=y
CONFIG_VMLINUX_VALIDATION=y
CONFIG_GCC_PLUGIN_STACKLEAK=y

  vmlinux.o: warning: objtool: do_syscall_64()+0x9: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: do_int80_syscall_32()+0x9: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: exc_general_protection()+0x22: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: fixup_bad_iret()+0x20: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: do_machine_check()+0x27: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .text+0x5346e: call to stackleak_erase() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .entry.text+0x143: call to stackleak_erase() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .entry.text+0x10eb: call to stackleak_erase() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .entry.text+0x17f9: call to stackleak_erase() leaves .noinstr.text section

Note that the plugin's addition of calls to stackleak_track_stack() from
noinstr functions is expected to be safe, as it isn't runtime
instrumentation and is self-contained.

Cc: Alexander Popov <alex.popov@linux.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "module, async: async_synchronize_full() on module init iff async is used"

[ Upstream commit 67d6212afda218d564890d1674bab28e8612170f ]

This reverts commit 774a1221e862b343388347bac9b318767336b20b.

We need to finish all async code before the module init sequence is
done.  In the reverted commit the PF_USED_ASYNC flag was added to mark a
thread that called async_schedule().  Then the PF_USED_ASYNC flag was
used to determine whether or not async_synchronize_full() needs to be
invoked.  This works when modprobe thread is calling async_schedule(),
but it does not work if module dispatches init code to a worker thread
which then calls async_schedule().

For example, PCI driver probing is invoked from a worker thread based on
a node where device is attached:

if (cpu < nr_cpu_ids)
error = work_on_cpu(cpu, local_pci_probe, &ddi);
else
error = local_pci_probe(&ddi);

We end up in a situation where a worker thread gets the PF_USED_ASYNC
flag set instead of the modprobe thread.  As a result,
async_synchronize_full() is not invoked and modprobe completes without
waiting for the async code to finish.

The issue was discovered while loading the pm80xx driver:
(scsi_mod.scan=async)

modprobe pm80xx                      worker
...
  do_init_module()
  ...
    pci_call_probe()
      work_on_cpu(local_pci_probe)
                                     local_pci_probe()
                                       pm8001_pci_probe()
                                         scsi_scan_host()
                                           async_schedule()
                                           worker->flags |= PF_USED_ASYNC;
                                     ...
      < return from worker >
  ...
  if (current->flags & PF_USED_ASYNC) <--- false
   async_synchronize_full();

Commit 21c3c5d28007 ("block: don't request module during elevator init")
fixed the deadlock issue which the reverted commit 774a1221e862
("module, async: async_synchronize_full() on module init iff async is
used") tried to fix.

Since commit 0fdff3ec6d87 ("async, kmod: warn on synchronous
request_module() from async workers") synchronous module loading from
async is not allowed.

Given that the original deadlock issue is fixed and it is no longer
allowed to call synchronous request_module() from async we can remove
PF_USED_ASYNC flag to make module init consistently invoke
async_synchronize_full() unless async module probe is requested.

Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Changyuan Lyu <changyuanl@google.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/Xen: streamline (and fix) PV CPU enumeration

[ Upstream commit e25a8d959992f61b64a58fc62fb7951dc6f31d1f ]

This started out with me noticing that "dom0_max_vcpus=<N>" with <N>
larger than the number of physical CPUs reported through ACPI tables
would not bring up the "excess" vCPU-s. Addressing this is the primary
purpose of the change; CPU maps handling is being tidied only as far as
is necessary for the change here (with the effect of also avoiding the
setting up of too much per-CPU infrastructure, i.e. for CPUs which can
never come online).

Noticing that xen_fill_possible_map() is called way too early, whereas
xen_filter_cpu_maps() is called too late (after per-CPU areas were
already set up), and further observing that each of the functions serves
only one of Dom0 or DomU, it looked like it was better to simplify this.
Use the .get_smp_config hook instead, uniformly for Dom0 and DomU.
xen_fill_possible_map() can be dropped altogether, while
xen_filter_cpu_maps() is re-purposed but not otherwise changed.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/2dbd5f0a-9859-ca2d-085e-a02f7166c610@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix logic inversion in check

[ Upstream commit e8ae38720e1a685fd98cfa5ae118c9d07b45ca79 ]

We probably never trigger this, but the logic inside the check is
inverted.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd: Only run s3 or s0ix if system is configured properly

[ Upstream commit 04ef860469fda6a646dc841190d05b31fae68e8c ]

This will cause misconfigured systems to not run the GPU suspend
routines.

* In APUs that are properly configured system will go into s2idle.
* In APUs that are intended to be S3 but user selects
  s2idle the GPU will stay fully powered for the suspend.
* In APUs that are intended to be s2idle and system misconfigured
  the GPU will stay fully powered for the suspend.
* In systems that are intended to be s2idle, but AMD dGPU is also
  present, the dGPU will go through S3

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd: add support to check whether the system is set to s3

[ Upstream commit f52a2b8badbd24faf73a13c9c07fdb9d07352944 ]

This will be used to help make decisions on what to do in
misconfigured systems.

v2: squash in semicolon fix from Stephen Rothwell

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sparx5: do not refer to skb after passing it on

[ Upstream commit 81eb8b0b18789e647e65579303529fd52d861cc2 ]

Do not try to use any SKB fields after the packet has been passed up in the
receive stack.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220202083039.3774851-1-steen.hegelund@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-rdma: fix possible use-after-free in transport error_recovery work

[ Upstream commit b6bb1722f34bbdbabed27acdceaf585d300c5fd2 ]

While nvme_rdma_submit_async_event_work is checking the ctrl and queue
state before preparing the AER command and scheduling io_work, in order
to fully prevent a race where this check is not reliable the error
recovery work must flush async_event_work before continuing to destroy
the admin queue after setting the ctrl state to RESETTING such that
there is no race .submit_async_event and the error recovery handler
itself changing the ctrl state.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-tcp: fix possible use-after-free in transport error_recovery work

[ Upstream commit ff9fc7ebf5c06de1ef72a69f9b1ab40af8b07f9e ]

While nvme_tcp_submit_async_event_work is checking the ctrl and queue
state before preparing the AER command and scheduling io_work, in order
to fully prevent a race where this check is not reliable the error
recovery work must flush async_event_work before continuing to destroy
the admin queue after setting the ctrl state to RESETTING such that
there is no race .submit_async_event and the error recovery handler
itself changing the ctrl state.

Tested-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: fix a possible use-after-free in controller reset during load

[ Upstream commit 0fa0f99fc84e41057cbdd2efbfe91c6b2f47dd9d ]

Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl
readiness for AER submission. This may lead to a use-after-free
condition that was observed with nvme-tcp.

The race condition may happen in the following scenario:
1. driver executes its reset_ctrl_work
2. -> nvme_stop_ctrl - flushes ctrl async_event_work
3. ctrl sends AEN which is received by the host, which in turn
   schedules AEN handling
4. teardown admin queue (which releases the queue socket)
5. AEN processed, submits another AER, calling the driver to submit
6. driver attempts to send the cmd
==> use-after-free

In order to fix that, add ctrl state check to validate the ctrl
is actually able to accept the AER submission.

This addresses the above race in controller resets because the driver
during teardown should:
1. change ctrl state to RESETTING
2. flush async_event_work (as well as other async work elements)

So after 1,2, any other AER command will find the
ctrl state to be RESETTING and bail out without submitting the AER.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd: Warn users about potential s0ix problems

[ Upstream commit a6ed2035878e5ad2e43ed175d8812ac9399d6c40 ]

On some OEM setups users can configure the BIOS for S3 or S2idle.
When configured to S3 users can still choose 's2idle' in the kernel by
using `/sys/power/mem_sleep`.  Before commit 6dc8265f9803 ("drm/amdgpu:
always reset the asic in suspend (v2)"), the GPU would crash.  Now when
configured this way, the system should resume but will use more power.

As such, adjust the `amdpu_acpi_is_s0ix function` to warn users about
potential power consumption issues during their first attempt at
suspending.

Reported-by: Bjoren Dasse <bjoern.daase@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1824
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix use-after-free for aborted SSP/STP sas_task

[ Upstream commit df7abcaa1246e2537ab4016077b5443bb3c09378 ]

Currently a use-after-free may occur if a sas_task is aborted by the upper
layer before we handle the I/O completion in mpi_ssp_completion() or
mpi_sata_completion().

In this case, the following are the two steps in handling those I/O
completions:

 - Call complete() to inform the upper layer handler of completion of
   the I/O.

 - Release driver resources associated with the sas_task in
   pm8001_ccb_task_free() call.

When complete() is called, the upper layer may free the sas_task. As such,
we should not touch the associated sas_task afterwards, but we do so in the
pm8001_ccb_task_free() call.

Fix by swapping the complete() and pm8001_ccb_task_free() calls ordering.

Link: https://lore.kernel.org/r/1643289172-165636-4-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix use-after-free for aborted TMF sas_task

[ Upstream commit 61f162aa4381845acbdc7f2be4dfb694d027c018 ]

Currently a use-after-free may occur if a TMF sas_task is aborted before we
handle the IO completion in mpi_ssp_completion(). The abort occurs due to
timeout.

When the timeout occurs, the SAS_TASK_STATE_ABORTED flag is set and the
sas_task is freed in pm8001_exec_internal_tmf_task().

However, if the I/O completion occurs later, the I/O completion still
thinks that the sas_task is available. Fix this by clearing the ccb->task
if the TMF times out - the I/O completion handler does nothing if this
pointer is cleared.

Link: https://lore.kernel.org/r/1643289172-165636-3-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: core: Reallocate device's budget map on queue depth change

[ Upstream commit edb854a3680bacc9ef9b91ec0c5ff6105886f6f3 ]

We currently use ->cmd_per_lun as initial queue depth for setting up the
budget_map. Martin Wilck reported that it is common for the queue_depth to
be subsequently updated in slave_configure() based on detected hardware
characteristics.

As a result, for some drivers, the static host template settings for
cmd_per_lun and can_queue won't actually get used in practice. And if the
default values are used to allocate the budget_map, memory may be consumed
unnecessarily.

Fix the issue by reallocating the budget_map after ->slave_configure()
returns. At that time the device queue_depth should accurately reflect what
the hardware needs.

Link: https://lore.kernel.org/r/20220127153733.409132-1-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Reported-by: Martin Wilck <martin.wilck@suse.com>
Suggested-by: Martin Wilck <martin.wilck@suse.com>
Tested-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kselftest: Fix vdso_test_abi return status

[ Upstream commit ec049891b2dc16591813eacaddc476b3d27c8c14 ]

vdso_test_abi contains a batch of tests that verify the validity of the
vDSO ABI.

When a vDSO symbol is not found the relevant test is skipped reporting
KSFT_SKIP. All the tests return values are then added in a single
variable which is checked to verify failures. This approach can have
side effects which result in reporting the wrong kselftest exit status.

Fix vdso_test_abi verifying the return code of each test separately.

Cc: Shuah Khan <shuah@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm80xx: Fix double completion for SATA devices

[ Upstream commit c26b85ea16365079be8d206b20556a60a0c69ad4 ]

Current code handles completions for SATA devices in mpi_sata_completion()
and mpi_sata_event().

However, at the time when any SATA event happens, for almost all the event
types, the command is still in the target. It is therefore incorrect to
complete the task in sata_event().

There are some events for which we get sata_completions, some need recovery
procedure and others abort. All the tasks must be completed via
sata_completion() path.

Removed the task done related code from sata_events().  For tasks where we
don't get completions, let top layer call abort() to abort the command post
timeout.

Link: https://lore.kernel.org/r/20220124082255.86223-1-Ajish.Koshy@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Co-developed-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

quota: make dquot_quota_sync return errors from ->sync_fs

[ Upstream commit dd5532a4994bfda0386eb2286ec00758cee08444 ]

Strangely, dquot_quota_sync ignores the return code from the ->sync_fs
call, which means that quotacalls like Q_SYNC never see the error.  This
doesn't seem right, so fix that.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfs: make freeze_super abort when sync_filesystem returns error

[ Upstream commit 2719c7160dcfaae1f73a1c0c210ad3281c19022e ]

If we fail to synchronize the filesystem while preparing to freeze the
fs, abort the freeze.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: bcm63xx: fix unmet dependency on REGMAP for GPIO_REGMAP

[ Upstream commit 3a5286955bf5febc3d151bcb2c5e272e383b64aa ]

When PINCTRL_BCM63XX is selected,
and REGMAP is not selected,
Kbuild gives the following warning:

WARNING: unmet direct dependencies detected for GPIO_REGMAP
  Depends on [n]: GPIOLIB [=y] && REGMAP [=n]
  Selected by [y]:
  - PINCTRL_BCM63XX [=y] && PINCTRL [=y]

This is because PINCTRL_BCM63XX
selects GPIO_REGMAP without selecting or depending on
REGMAP, despite GPIO_REGMAP depending on REGMAP.

This unmet dependency bug was detected by Kismet,
a static analysis tool for Kconfig. Please advise
if this is not the appropriate solution.

Signed-off-by: Julian Braha <julianbraha@gmail.com>
Link: https://lore.kernel.org/r/20220117062557.89568-1-julianbraha@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ax25: improve the incomplete fix to avoid UAF and NPD bugs

[ Upstream commit 4e0f718daf97d47cf7dec122da1be970f145c809 ]

The previous commit 1ade48d0c27d ("ax25: NPD bug when detaching
AX25 device") introduce lock_sock() into ax25_kill_by_device to
prevent NPD bug. But the concurrency NPD or UAF bug will occur,
when lock_sock() or release_sock() dereferences the ax25_cb->sock.

The NULL pointer dereference bug can be shown as below:

ax25_kill_by_device()        | ax25_release()
                             |   ax25_destroy_socket()
                             |     ax25_cb_del()
  ...                        |     ...
                             |     ax25->sk=NULL;
  lock_sock(s->sk); //(1)    |
  s->ax25_dev = NULL;        |     ...
  release_sock(s->sk); //(2) |
  ...                        |

The root cause is that the sock is set to null before dereference
site (1) or (2). Therefore, this patch extracts the ax25_cb->sock
in advance, and uses ax25_list_lock to protect it, which can synchronize
with ax25_cb_del() and ensure the value of sock is not null before
dereference sites.

The concurrency UAF bug can be shown as below:

ax25_kill_by_device()        | ax25_release()
                             |   ax25_destroy_socket()
  ...                        |   ...
                             |   sock_put(sk); //FREE
  lock_sock(s->sk); //(1)    |
  s->ax25_dev = NULL;        |   ...
  release_sock(s->sk); //(2) |
  ...                        |

The root cause is that the sock is released before dereference
site (1) or (2). Therefore, this patch uses sock_hold() to increase
the refcount of sock and uses ax25_list_lock to protect it, which
can synchronize with ax25_cb_del() in ax25_destroy_socket() and
ensure the sock wil not be released before dereference sites.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: skip mincore.check_file_mmap when fs lacks needed support

[ Upstream commit dae1d8ac31896988e7313384c0370176a75e9b45 ]

Report mincore.check_file_mmap as SKIP instead of FAIL if the underlying
filesystem lacks support of O_TMPFILE or fallocate since such failures
are not really related to mincore functionality.

Cc: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: openat2: Skip testcases that fail with EOPNOTSUPP

[ Upstream commit ac9e0a250bb155078601a5b999aab05f2a04d1ab ]

Skip testcases that fail since the requested valid flags combination is not
supported by the underlying filesystem.

Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: openat2: Add missing dependency in Makefile

[ Upstream commit ea3396725aa143dd42fe388cb67e44c90d2fb719 ]

Add a dependency on header helpers.h to the main target; while at that add
to helpers.h also a missing include for bool types.

Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: openat2: Print also errno in failure messages

[ Upstream commit e051cdf655fa016692008a446a060eff06222bb5 ]

In E_func() macro, on error, print also errno in order to aid debugging.

Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/zram: Adapt the situation that /dev/zram0 is being used

[ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ]

If zram-generator package is installed and works, then we can not remove
zram module because zram swap is being used. This case needs a clean zram
environment, change this test by using hot_add/hot_remove interface. So
even zram device is being used, we still can add zram device and remove
them in cleanup.

The two interface was introduced since kernel commit 6566d1a32bf7("zram:
add dynamic device add/remove functionality") in v4.2-rc1. If kernel
supports these two interface, we use hot_add/hot_remove to slove this
problem, if not, just check whether zram is being used or built in, then
skip it on old kernel.

Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/zram01.sh: Fix compression ratio calculation

[ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ]

zram01 uses `free -m` to measure zram memory usage. The results are no
sense because they are polluted by all running processes on the system.

We Should only calculate the free memory delta for the current process.
So use the third field of /sys/block/zram<id>/mm_stat to measure memory
usage instead. The file is available since kernel 4.1.

orig_data_size(first): uncompressed size of data stored in this disk.
compr_data_size(second): compressed size of data stored in this disk
mem_used_total(third): the amount of memory allocated for this disk

Also remove useless zram cleanup call in zram_fill_fs and so we don't
need to cleanup zram twice if fails.

Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/zram: Skip max_comp_streams interface on newer kernel

[ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ]

Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram
has switched to per-cpu streams. Even kernel still keep this interface for
some reasons, but writing to max_comp_stream doesn't take any effect. So
skip it on newer kernel ie 4.7.

The code that comparing kernel version is from xfstests testsuite ext4/053.

Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ieee802154: at86rf230: Stop leaking skb's

[ Upstream commit e5ce576d45bf72fd0e3dc37eff897bfcc488f6a9 ]

Upon error the ieee802154_xmit_complete() helper is not called. Only
ieee802154_wake_queue() is called manually. In the Tx case we then leak
the skb structure.

Free the skb structure upon error before returning when appropriate.

As the 'is_tx = 0' cannot be moved in the complete handler because of a
possible race between the delay in switching to STATE_RX_AACK_ON and a
new interrupt, we introduce an intermediate 'was_tx' boolean just for
this purpose.

There is no Fixes tag applying here, many changes have been made on this
area and the issue kind of always existed.

Suggested-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-4-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kselftest: signal all child processes

[ Upstream commit 92d25637a3a45904292c93f1863c6bbda4e3e38f ]

We have some many cases that will create child process as well, such as
pidfd_wait. Previously, we will signal/kill the parent process when it
is time out, but this signal will not be sent to its child process. In
such case, if child process doesn't terminate itself, ksefltest framework
will hang forever.

Here we group all its child processes so that kill() can signal all of
them in timeout.

Fixed change log: Shuah Khan <skhan@linuxfoundation.org>

Suggested-by: yang xu <xuyang2018.jy@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: rtc: Increase test timeout so that all tests run

[ Upstream commit f034cc1301e7d83d4ec428dd6b8ffb57ca446efb ]

The timeout setting for the rtc kselftest is currently 90 seconds. This
setting is used by the kselftest runner to stop running a test if it
takes longer than the assigned value.

However, two of the test cases inside rtc set alarms. These alarms are
set to the next beginning of the minute, so each of these test cases may
take up to, in the worst case, 60 seconds.

In order to allow for all test cases in rtc to run, even in the worst
case, when using the kselftest runner, the timeout value should be
increased to at least 120. Set it to 180, so there's some additional
slack.

Correct operation can be tested by running the following command right
after the start of a minute (low second count), and checking that all
test cases run:

./run_kselftest.sh -c rtc

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: tool: Import missing importlib.abc

[ Upstream commit 235528072f28b3b0a1446279b7eaddda36dbf743 ]

Python 3.10.0 contains:
9e09849d20 ("bpo-41006: importlib.util no longer imports typing (GH-20938)")

It causes importlib.util to no longer import importlib.abs, which leads
to the following error when trying to use kunit with qemu:
AttributeError: module 'importlib' has no attribute 'abc'. Did you mean: '_abc'?

Add the missing import.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: ISST: Fix possible circular locking dependency detected

[ Upstream commit 17da2d5f93692086dd096a975225ffd5622d0bf8 ]

As reported:

[  256.104522] ======================================================
[  256.113783] WARNING: possible circular locking dependency detected
[  256.120093] 5.16.0-rc6-yocto-standard+ #99 Not tainted
[  256.125362] ------------------------------------------------------
[  256.131673] intel-speed-sel/844 is trying to acquire lock:
[  256.137290] ffffffffc036f0d0 (punit_misc_dev_lock){+.+.}-{3:3}, at: isst_if_open+0x18/0x90 [isst_if_common]
[  256.147171]
[  256.147171] but task is already holding lock:
[  256.153135] ffffffff8ee7cb50 (misc_mtx){+.+.}-{3:3}, at: misc_open+0x2a/0x170
[  256.160407]
[  256.160407] which lock already depends on the new lock.
[  256.160407]
[  256.168712]
[  256.168712] the existing dependency chain (in reverse order) is:
[  256.176327]
[  256.176327] -> #1 (misc_mtx){+.+.}-{3:3}:
[  256.181946]        lock_acquire+0x1e6/0x330
[  256.186265]        __mutex_lock+0x9b/0x9b0
[  256.190497]        mutex_lock_nested+0x1b/0x20
[  256.195075]        misc_register+0x32/0x1a0
[  256.199390]        isst_if_cdev_register+0x65/0x180 [isst_if_common]
[  256.205878]        isst_if_probe+0x144/0x16e [isst_if_mmio]
...
[  256.241976]
[  256.241976] -> #0 (punit_misc_dev_lock){+.+.}-{3:3}:
[  256.248552]        validate_chain+0xbc6/0x1750
[  256.253131]        __lock_acquire+0x88c/0xc10
[  256.257618]        lock_acquire+0x1e6/0x330
[  256.261933]        __mutex_lock+0x9b/0x9b0
[  256.266165]        mutex_lock_nested+0x1b/0x20
[  256.270739]        isst_if_open+0x18/0x90 [isst_if_common]
[  256.276356]        misc_open+0x100/0x170
[  256.280409]        chrdev_open+0xa5/0x1e0
...

The call sequence suggested that misc_device /dev file can be opened
before misc device is yet to be registered, which is done only once.

Here punit_misc_dev_lock was used as common lock, to protect the
registration by multiple ISST HW drivers, one time setup, prevent
duplicate registry of misc device and prevent load/unload when device
is open.

We can split into locks:
- One which just prevent duplicate call to misc_register() and one
time setup. Also never call again if the misc_register() failed or
required one time setup is failed. This lock is not shared with
any misc device callbacks.

- The other lock protects registry, load and unload of HW drivers.

Sequence in isst_if_cdev_register()
- Register callbacks under punit_misc_dev_open_lock
- Call isst_misc_reg() which registers misc_device on the first
registry which is under punit_misc_dev_reg_lock, which is not
shared with callbacks.

Sequence in isst_if_cdev_unregister
Just opposite of isst_if_cdev_register

Reported-and-tested-by: Liwei Song <liwei.song@windriver.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220112022521.54669-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: touchscreen_dmi: Add info for the RWC NANOTE P8 AY07J 2-in-1

[ Upstream commit 512eb73cfd1208898cf10cb06094e0ee0bb53b58 ]

Add touchscreen info for RWC NANOTE P8 (AY07J) 2-in-1.

Signed-off-by: Yuka Kawajiri <yukx00@gmail.com>
Link: https://lore.kernel.org/r/20220111154019.4599-1-yukx00@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: send: in case of IO error log it

commit 2e7be9db125a0bf940c5d65eb5c40d8700f738b5 upstream.

Currently if we get IO error while doing send then we abort without
logging information about which file caused issue.  So log it to help
with debugging.

CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Dāvis Mosāns <davispuh@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Add ioread64_lo_hi() and iowrite64_lo_hi()

commit 18a1d5e1945385d9b5adc3fe11427ce4a9d2826e upstream.

It's a followup to the previous commit f15309d7ad5d ("parisc: Add
ioread64_hi_lo() and iowrite64_hi_lo()") which does only half of
the job. Add the rest, so we won't get a new kernel test robot
reports.

Fixes: f15309d7ad5d ("parisc: Add ioread64_hi_lo() and iowrite64_hi_lo()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: hv: Fix NUMA node assignment when kernel boots with custom NUMA topology

commit 3149efcdf2c6314420c418dfc94de53bfd076b1f upstream.

When kernel boots with a NUMA topology with some NUMA nodes offline, the PCI
driver should only set an online NUMA node on the device. This can happen
during KDUMP where some NUMA nodes are not made online by the KDUMP kernel.

This patch also fixes the case where kernel is booting with "numa=off".

Fixes: 999dd956d838 ("PCI: hv: Add support for protocol 1.3 and support PCI_BUS_RELATIONS2")
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@microsoft.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/1643247814-15184-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: amd_sfh: Correct the structure field name

commit aa0b724a2bf041036e56cbb3b4b3afde7c5e7c9e upstream.

Misinterpreted intr_enable field name. Hence correct the structure
field name accordingly to reflect the functionality.

Fixes: f264481ad614 ("HID: amd_sfh: Extend driver capabilities for multi-generation support")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: amd_sfh: Increase sensor command timeout

commit a7072c01c3ac3ae6ecd08fa7b43431cfc8ed331f upstream.

HPD sensors take more time to initialize. Hence increasing sensor
command timeout to get response with status within a max timeout.

Fixes: 173709f50e98 ("HID: amd_sfh: Add command response to check command status")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: i2c-hid: goodix: Fix a lockdep splat

commit 2787710f73fcce4a9bdab540aaf1aef778a27462 upstream.

I'm was on the receiving end of a lockdep splat from this driver and after
scratching my head I couldn't be entirely sure it was a false positive
given we would also have to think about whether the regulator locking is
safe (since the notifier is called whilst holding regulator locks which
are also needed for regulator_is_enabled() ).

Regardless of whether it is a real bug or not, the mutex isn't needed.
We can use reference counting tricks instead to avoid races with the
notifier calls.

The observed splat follows:

------------------------------------------------------
kworker/u16:3/127 is trying to acquire lock:
ffff00008021fb20 (&ihid_goodix->regulator_mutex){+.+.}-{4:4}, at: ihid_goodix_vdd_notify+0x30/0x94

but task is already holding lock:
ffff0000835c60c0 (&(&rdev->notifier)->rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x30/0x70

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&(&rdev->notifier)->rwsem){++++}-{4:4}:
       down_write+0x68/0x8c
       blocking_notifier_chain_register+0x54/0x70
       regulator_register_notifier+0x1c/0x24
       devm_regulator_register_notifier+0x58/0x98
       i2c_hid_of_goodix_probe+0xdc/0x158
       i2c_device_probe+0x25d/0x270
       really_probe+0x174/0x2cc
       __driver_probe_device+0xc0/0xd8
       driver_probe_device+0x50/0xe4
       __device_attach_driver+0xa8/0xc0
       bus_for_each_drv+0x9c/0xc0
       __device_attach_async_helper+0x6c/0xbc
       async_run_entry_fn+0x38/0x100
       process_one_work+0x294/0x438
       worker_thread+0x180/0x258
       kthread+0x120/0x130
       ret_from_fork+0x10/0x20

-> #0 (&ihid_goodix->regulator_mutex){+.+.}-{4:4}:
       __lock_acquire+0xd24/0xfe8
       lock_acquire+0x288/0x2f4
       __mutex_lock+0xa0/0x338
       mutex_lock_nested+0x3c/0x5c
       ihid_goodix_vdd_notify+0x30/0x94
       notifier_call_chain+0x6c/0x8c
       blocking_notifier_call_chain+0x48/0x70
       _notifier_call_chain.isra.0+0x18/0x20
       _regulator_enable+0xc0/0x178
       regulator_enable+0x40/0x7c
       goodix_i2c_hid_power_up+0x18/0x20
       i2c_hid_core_power_up.isra.0+0x1c/0x2c
       i2c_hid_core_probe+0xd8/0x3d4
       i2c_hid_of_goodix_probe+0x14c/0x158
       i2c_device_probe+0x25c/0x270
       really_probe+0x174/0x2cc
       __driver_probe_device+0xc0/0xd8
       driver_probe_device+0x50/0xe4
       __device_attach_driver+0xa8/0xc0
       bus_for_each_drv+0x9c/0xc0
       __device_attach_async_helper+0x6c/0xbc
       async_run_entry_fn+0x38/0x100
       process_one_work+0x294/0x438
       worker_thread+0x180/0x258
       kthread+0x120/0x130
       ret_from_fork+0x10/0x20

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&rdev->notifier)->rwsem);
                               lock(&ihid_goodix->regulator_mutex);
                               lock(&(&rdev->notifier)->rwsem);
  lock(&ihid_goodix->regulator_mutex);

 *** DEADLOCK ***

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Fixes: 18eeef46d359 ("HID: i2c-hid: goodix: Tie the reset line to true state of the regulator")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: amd_sfh: Add illuminance mask to limit ALS max value

commit 91aaea527bc3b707c5d3208cde035421ed54f79c upstream.

ALS illuminance value present only in first 15 bits from SFH firmware
for V2 platforms. Hence added a mask of 15 bit to limit ALS max
illuminance values to get correct illuminance value.

Fixes: 0aad9c95eb9a ("HID: amd_sfh: Extend ALS support for newer AMD platform")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: don't try to NUMA-migrate COW pages that have other uses

commit 80d47f5de5e311cbc0d01ebb6ee684e8f4c196c6 upstream.

Oded Gabbay reports that enabling NUMA balancing causes corruption with
his Gaudi accelerator test load:

 "All the details are in the bug, but the bottom line is that somehow,
  this patch causes corruption when the numa balancing feature is
  enabled AND we don't use process affinity AND we use GUP to pin pages
  so our accelerator can DMA to/from system memory.

  Either disabling numa balancing, using process affinity to bind to
  specific numa-node or reverting this patch causes the bug to
  disappear"

and Oded bisected the issue to commit 09854ba94c6a ("mm: do_wp_page()
simplification").

Now, the NUMA balancing shouldn't actually be changing the writability
of a page, and as such shouldn't matter for COW.  But it appears it
does.  Suspicious.

However, regardless of that, the condition for enabling NUMA faults in
change_pte_range() is nonsensical.  It uses "page_mapcount(page)" to
decide if a COW page should be NUMA-protected or not, and that makes
absolutely no sense.

The number of mappings a page has is irrelevant: not only does GUP get a
reference to a page as in Oded's case, but the other mappings migth be
paged out and the only reference to them would be in the page count.

Since we should never try to NUMA-balance a page that we can't move
anyway due to other references, just fix the code to use 'page_count()'.
Oded confirms that that fixes his issue.

Now, this does imply that something in NUMA balancing ends up changing
page protections (other than the obvious one of making the page
inaccessible to get the NUMA faulting information).  Otherwise the COW
simplification wouldn't matter - since doing the GUP on the page would
make sure it's writable.

The cause of that permission change would be good to figure out too,
since it clearly results in spurious COW events - but fixing the
nonsensical test that just happened to work before is obviously the
CorrectThing(tm) to do regardless.

Fixes: 09854ba94c6a ("mm: do_wp_page() simplification")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215616
Link: https://lore.kernel.org/all/CAFCwf10eNmwq2wD71xjUhqkvv5+_pJMR1nPug2RqNDcFT4H86Q@mail.gmail.com/
Reported-and-tested-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: block: fix read single on recovery logic

commit 54309fde1a352ad2674ebba004a79f7d20b9f037 upstream.

On reads with MMC_READ_MULTIPLE_BLOCK that fail,
the recovery handler will use MMC_READ_SINGLE_BLOCK for
each of the blocks, up to MMC_READ_SINGLE_RETRIES times each.
The logic for this is fixed to never report unsuccessful reads
as success to the block layer.

On command error with retries remaining, blk_update_request was
called with whatever value error was set last to.
In case it was last set to BLK_STS_OK (default), the read will be
reported as success, even though there was no data read from the device.
This could happen on a CRC mismatch for the response,
a card rejecting the command (e.g. again due to a CRC mismatch).
In case it was last set to BLK_STS_IOERR, the error is reported correctly,
but no retries will be attempted.

Fixes: 81196976ed946c ("mmc: block: Add blk-mq support")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/bc706a6ab08c4fe2834ba0c05a804672@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix sglist access in ccio-dma.c

commit d7da660cab47183cded65e11b64497d0f56c6edf upstream.

This patch implements the same bug fix to ccio-dma.c as to sba_iommu.c.
It ensures that only the allocated entries of the sglist are accessed.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix data TLB miss in sba_unmap_sg

commit b7d6f44a0fa716a82969725516dc0b16bc7cd514 upstream.

Rolf Eike Beer reported the following bug:

[1274934.746891] Bad Address (null pointer deref?): Code=15 (Data TLB miss fault) at addr 0000004140000018
[1274934.746891] CPU: 3 PID: 5549 Comm: cmake Not tainted 5.15.4-gentoo-parisc64 #4
[1274934.746891] Hardware name: 9000/785/C8000
[1274934.746891]
[1274934.746891]      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
[1274934.746891] PSW: 00001000000001001111111000001110 Not tainted
[1274934.746891] r00-03  000000ff0804fe0e 0000000040bc9bc0 00000000406760e4 0000004140000000
[1274934.746891] r04-07  0000000040b693c0 0000004140000000 000000004a2b08b0 0000000000000001
[1274934.746891] r08-11  0000000041f98810 0000000000000000 000000004a0a7000 0000000000000001
[1274934.746891] r12-15  0000000040bddbc0 0000000040c0cbc0 0000000040bddbc0 0000000040bddbc0
[1274934.746891] r16-19  0000000040bde3c0 0000000040bddbc0 0000000040bde3c0 0000000000000007
[1274934.746891] r20-23  0000000000000006 000000004a368950 0000000000000000 0000000000000001
[1274934.746891] r24-27  0000000000001fff 000000000800000e 000000004a1710f0 0000000040b693c0
[1274934.746891] r28-31  0000000000000001 0000000041f988b0 0000000041f98840 000000004a171118
[1274934.746891] sr00-03  00000000066e5800 0000000000000000 0000000000000000 00000000066e5800
[1274934.746891] sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000
[1274934.746891]
[1274934.746891] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000406760e8 00000000406760ec
[1274934.746891]  IIR: 48780030    ISR: 0000000000000000  IOR: 0000004140000018
[1274934.746891]  CPU:        3   CR30: 00000040e3a9c000 CR31: ffffffffffffffff
[1274934.746891]  ORIG_R28: 0000000040acdd58
[1274934.746891]  IAOQ[0]: sba_unmap_sg+0xb0/0x118
[1274934.746891]  IAOQ[1]: sba_unmap_sg+0xb4/0x118
[1274934.746891]  RP(r2): sba_unmap_sg+0xac/0x118
[1274934.746891] Backtrace:
[1274934.746891]  [<00000000402740cc>] dma_unmap_sg_attrs+0x6c/0x70
[1274934.746891]  [<000000004074d6bc>] scsi_dma_unmap+0x54/0x60
[1274934.746891]  [<00000000407a3488>] mptscsih_io_done+0x150/0xd70
[1274934.746891]  [<0000000040798600>] mpt_interrupt+0x168/0xa68
[1274934.746891]  [<0000000040255a48>] __handle_irq_event_percpu+0xc8/0x278
[1274934.746891]  [<0000000040255c34>] handle_irq_event_percpu+0x3c/0xd8
[1274934.746891]  [<000000004025ecb4>] handle_percpu_irq+0xb4/0xf0
[1274934.746891]  [<00000000402548e0>] generic_handle_irq+0x50/0x70
[1274934.746891]  [<000000004019a254>] call_on_stack+0x18/0x24
[1274934.746891]
[1274934.746891] Kernel panic - not syncing: Bad Address (null pointer deref?)

The bug is caused by overrunning the sglist and incorrectly testing
sg_dma_len(sglist) before nents. Normally this doesn't cause a crash,
but in this case sglist crossed a page boundary. This occurs in the
following code:

while (sg_dma_len(sglist) && nents--) {

The fix is simply to test nents first and move the decrement of nents
into the loop.

Reported-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Drop __init from map_pages declaration

commit 9129886b88185962538180625ca8051362b01327 upstream.

With huge kernel pages, we randomly eat a SPARC in map_pages(). This
is fixed by dropping __init from the declaration.

However, map_pages references the __init routine memblock_alloc_try_nid
via memblock_alloc.  Thus, it needs to be marked with __ref.

memblock_alloc is only called before the kernel text is set to readonly.

The __ref on free_initmem is no longer needed.

Comment regarding map_pages being in the init section is removed.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: parisc: GSC: fix build when IOSAPIC is not set

commit 6e8793674bb0d1135ca0e5c9f7e16fecbf815926 upstream.

There is a build error when using a kernel .config file from
'kernel test robot' for a different build problem:

hppa64-linux-ld: drivers/tty/serial/8250/8250_gsc.o: in function `.LC3':
(.data.rel.ro+0x18): undefined reference to `iosapic_serial_irq'

when:
  CONFIG_GSC=y
  CONFIG_SERIO_GSCPS2=y
  CONFIG_SERIAL_8250_GSC=y
  CONFIG_PCI is not set
    and hence PCI_LBA is not set.
  IOSAPIC depends on PCI_LBA, so IOSAPIC is not set/enabled.

Make the use of iosapic_serial_irq() conditional to fix the build error.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-parisc@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-serial@vger.kernel.org
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Suggested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Show error if wrong 32/64-bit compiler is being used

commit b160628e9ebcdc85d0db9d7f423c26b3c7c179d0 upstream.

It happens quite often that people use the wrong compiler to build the
kernel:

make ARCH=parisc   -> builds the 32-bit kernel
make ARCH=parisc64 -> builds the 64-bit kernel

This patch adds a sanity check which errors out with an instruction how
use the correct ARCH= option.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "svm: Add warning message for AVIC IPI invalid target"

commit dd4589eee99db8f61f7b8f7df1531cad3f74a64d upstream.

Remove a WARN on an "AVIC IPI invalid target" exit, the WARN is trivial
to trigger from guest as it will fail on any destination APIC ID that
doesn't exist from the guest's perspective.

Don't bother recording anything in the kernel log, the common tracepoint
for kvm_avic_incomplete_ipi() is sufficient for debugging.

This reverts commit 37ef0c4414c9743ba7f1af4392f0a27a99649f2a.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID:Add support for UGTABLET WP5540

commit fd5dd6acd8f823ea804f76d3af64fa1be9d5fb78 upstream.

This patch adds support for the UGTABLET WP5540 digitizer tablet
devices. Without it, the pen moves the cursor, but neither the
buttons nor the tap sensor in the tip do work.

Signed-off-by: Sergio Costas <rastersoft@gmail.com>
Link: https://lore.kernel.org/r/63dece1d-91ca-1b1b-d90d-335be66896be@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Fix mailbox command failure during driver initialization

commit efe1dc571a5b808baa26682eef16561be2e356fd upstream.

Contention for the mailbox interface may occur during driver initialization
(immediately after a function reset), between mailbox commands initiated
via ioctl (bsg) and those driver requested by the driver.

After setting SLI_ACTIVE flag for a port, there is a window in which the
driver will allow an ioctl to be initiated while the adapter is
initializing and issuing mailbox commands via polling. The polling logic
then gets confused.

Correct by having thread setting SLI_ACTIVE spot an active mailbox command
and allow it complete before proceeding.

Link: https://lore.kernel.org/r/20210921143008.64212-1-jsmart2021@gmail.com
Co-developed-by: Nigel Kirkland <nkirkland2304@gmail.com>
Signed-off-by: Nigel Kirkland <nkirkland2304@gmail.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: cache reported zone during mount

commit 16beac87e95e2fb278b552397c8260637f8a63f7 upstream.

When mounting a device, we are reporting the zones twice: once for
checking the zone attributes in btrfs_get_dev_zone_info and once for
loading block groups' zone info in
btrfs_load_block_group_zone_info(). With a lot of block groups, that
leads to a lot of REPORT ZONE commands and slows down the mount
process.

This patch introduces a zone info cache in struct
btrfs_zoned_device_info. The cache is populated while in
btrfs_get_dev_zone_info() and used for
btrfs_load_block_group_zone_info() to reduce the number of REPORT ZONE
commands. The zone cache is then released after loading the block
groups, as it will not be much effective during the run time.

Benchmark: Mount an HDD with 57,007 block groups
Before patch: 171.368 seconds
After patch: 64.064 seconds

While it still takes a minute due to the slowness of loading all the
block groups, the patch reduces the mount time by 1/3.

Link: https://lore.kernel.org/linux-btrfs/CAHQ7scUiLtcTqZOMMY5kbWUBOhGRwKo6J6wYPT5WY+C=cD49nQ@mail.gmail.com/
Fixes: 5b316468983d ("btrfs: get zone information of zoned block devices")
CC: stable@vger.kernel.org
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/proc: task_mmu.c: don't read mapcount for migration entry

commit 24d7275ce2791829953ed4e72f68277ceb2571c6 upstream.

The syzbot reported the below BUG:

  kernel BUG at include/linux/page-flags.h:785!
  invalid opcode: 0000 [#1] PREEMPT SMP KASAN
  CPU: 1 PID: 4392 Comm: syz-executor560 Not tainted 5.16.0-rc6-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  RIP: 0010:PageDoubleMap include/linux/page-flags.h:785 [inline]
  RIP: 0010:__page_mapcount+0x2d2/0x350 mm/util.c:744
  Call Trace:
    page_mapcount include/linux/mm.h:837 [inline]
    smaps_account+0x470/0xb10 fs/proc/task_mmu.c:466
    smaps_pte_entry fs/proc/task_mmu.c:538 [inline]
    smaps_pte_range+0x611/0x1250 fs/proc/task_mmu.c:601
    walk_pmd_range mm/pagewalk.c:128 [inline]
    walk_pud_range mm/pagewalk.c:205 [inline]
    walk_p4d_range mm/pagewalk.c:240 [inline]
    walk_pgd_range mm/pagewalk.c:277 [inline]
    __walk_page_range+0xe23/0x1ea0 mm/pagewalk.c:379
    walk_page_vma+0x277/0x350 mm/pagewalk.c:530
    smap_gather_stats.part.0+0x148/0x260 fs/proc/task_mmu.c:768
    smap_gather_stats fs/proc/task_mmu.c:741 [inline]
    show_smap+0xc6/0x440 fs/proc/task_mmu.c:822
    seq_read_iter+0xbb0/0x1240 fs/seq_file.c:272
    seq_read+0x3e0/0x5b0 fs/seq_file.c:162
    vfs_read+0x1b5/0x600 fs/read_write.c:479
    ksys_read+0x12d/0x250 fs/read_write.c:619
    do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
    entry_SYSCALL_64_after_hwframe+0x44/0xae

The reproducer was trying to read /proc/$PID/smaps when calling
MADV_FREE at the mean time.  MADV_FREE may split THPs if it is called
for partial THP.  It may trigger the below race:

           CPU A                         CPU B
           -----                         -----
  smaps walk:                      MADV_FREE:
  page_mapcount()
    PageCompound()
                                   split_huge_page()
    page = compound_head(page)
    PageDoubleMap(page)

When calling PageDoubleMap() this page is not a tail page of THP anymore
so the BUG is triggered.

This could be fixed by elevated refcount of the page before calling
mapcount, but that would prevent it from counting migration entries, and
it seems overkilling because the race just could happen when PMD is
split so all PTE entries of tail pages are actually migration entries,
and smaps_account() does treat migration entries as mapcount == 1 as
Kirill pointed out.

Add a new parameter for smaps_account() to tell this entry is migration
entry then skip calling page_mapcount().  Don't skip getting mapcount
for device private entries since they do track references with mapcount.

Pagemap also has the similar issue although it was not reported.  Fixed
it as well.

[shy828301@gmail.com: v4]
Link: https://lkml.kernel.org/r/20220203182641.824731-1-shy828301@gmail.com
[nathan@kernel.org: avoid unused variable warning in pagemap_pmd_range()]
Link: https://lkml.kernel.org/r/20220207171049.1102239-1-nathan@kernel.org
Link: https://lkml.kernel.org/r/20220120202805.3369-1-shy828301@gmail.com
Fixes: e9b61f19858a ("thp: reintroduce split_huge_page()")
Signed-off-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: syzbot+1f52b3a18d5633fa7f82@syzkaller.appspotmail.com
Acked-by: David Hildenbrand <david@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/pmu/gm200-: use alternate falcon reset sequence

commit 4cdd2450bf739bada353e82d27b00db9af8c3001 upstream.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.24

Link: https://lore.kernel.org/r/20220214092506.354292783@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Slade Watkins <slade@sladewatkins.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu: Fix potential use-after-free during probe

commit b54240ad494300ff0994c4539a531727874381f4 upstream.

Kasan has reported the following use after free on dev->iommu.
when a device probe fails and it is in process of freeing dev->iommu
in dev_iommu_free function, a deferred_probe_work_func runs in parallel
and tries to access dev->iommu->fwspec in of_iommu_configure path thus
causing use after free.

BUG: KASAN: use-after-free in of_iommu_configure+0xb4/0x4a4
Read of size 8 at addr ffffff87a2f1acb8 by task kworker/u16:2/153

Workqueue: events_unbound deferred_probe_work_func
Call trace:
 dump_backtrace+0x0/0x33c
 show_stack+0x18/0x24
 dump_stack_lvl+0x16c/0x1e0
 print_address_description+0x84/0x39c
 __kasan_report+0x184/0x308
 kasan_report+0x50/0x78
 __asan_load8+0xc0/0xc4
 of_iommu_configure+0xb4/0x4a4
 of_dma_configure_id+0x2fc/0x4d4
 platform_dma_configure+0x40/0x5c
 really_probe+0x1b4/0xb74
 driver_probe_device+0x11c/0x228
 __device_attach_driver+0x14c/0x304
 bus_for_each_drv+0x124/0x1b0
 __device_attach+0x25c/0x334
 device_initial_probe+0x24/0x34
 bus_probe_device+0x78/0x134
 deferred_probe_work_func+0x130/0x1a8
 process_one_work+0x4c8/0x970
 worker_thread+0x5c8/0xaec
 kthread+0x1f8/0x220
 ret_from_fork+0x10/0x18

Allocated by task 1:
 ____kasan_kmalloc+0xd4/0x114
 __kasan_kmalloc+0x10/0x1c
 kmem_cache_alloc_trace+0xe4/0x3d4
 __iommu_probe_device+0x90/0x394
 probe_iommu_group+0x70/0x9c
 bus_for_each_dev+0x11c/0x19c
 bus_iommu_probe+0xb8/0x7d4
 bus_set_iommu+0xcc/0x13c
 arm_smmu_bus_init+0x44/0x130 [arm_smmu]
 arm_smmu_device_probe+0xb88/0xc54 [arm_smmu]
 platform_drv_probe+0xe4/0x13c
 really_probe+0x2c8/0xb74
 driver_probe_device+0x11c/0x228
 device_driver_attach+0xf0/0x16c
 __driver_attach+0x80/0x320
 bus_for_each_dev+0x11c/0x19c
 driver_attach+0x38/0x48
 bus_add_driver+0x1dc/0x3a4
 driver_register+0x18c/0x244
 __platform_driver_register+0x88/0x9c
 init_module+0x64/0xff4 [arm_smmu]
 do_one_initcall+0x17c/0x2f0
 do_init_module+0xe8/0x378
 load_module+0x3f80/0x4a40
 __se_sys_finit_module+0x1a0/0x1e4
 __arm64_sys_finit_module+0x44/0x58
 el0_svc_common+0x100/0x264
 do_el0_svc+0x38/0xa4
 el0_svc+0x20/0x30
 el0_sync_handler+0x68/0xac
 el0_sync+0x160/0x180

Freed by task 1:
 kasan_set_track+0x4c/0x84
 kasan_set_free_info+0x28/0x4c
 ____kasan_slab_free+0x120/0x15c
 __kasan_slab_free+0x18/0x28
 slab_free_freelist_hook+0x204/0x2fc
 kfree+0xfc/0x3a4
 __iommu_probe_device+0x284/0x394
 probe_iommu_group+0x70/0x9c
 bus_for_each_dev+0x11c/0x19c
 bus_iommu_probe+0xb8/0x7d4
 bus_set_iommu+0xcc/0x13c
 arm_smmu_bus_init+0x44/0x130 [arm_smmu]
 arm_smmu_device_probe+0xb88/0xc54 [arm_smmu]
 platform_drv_probe+0xe4/0x13c
 really_probe+0x2c8/0xb74
 driver_probe_device+0x11c/0x228
 device_driver_attach+0xf0/0x16c
 __driver_attach+0x80/0x320
 bus_for_each_dev+0x11c/0x19c
 driver_attach+0x38/0x48
 bus_add_driver+0x1dc/0x3a4
 driver_register+0x18c/0x244
 __platform_driver_register+0x88/0x9c
 init_module+0x64/0xff4 [arm_smmu]
 do_one_initcall+0x17c/0x2f0
 do_init_module+0xe8/0x378
 load_module+0x3f80/0x4a40
 __se_sys_finit_module+0x1a0/0x1e4
 __arm64_sys_finit_module+0x44/0x58
 el0_svc_common+0x100/0x264
 do_el0_svc+0x38/0xa4
 el0_svc+0x20/0x30
 el0_sync_handler+0x68/0xac
 el0_sync+0x160/0x180

Fix this by setting dev->iommu to NULL first and
then freeing dev_iommu structure in dev_iommu_free
function.

Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Link: https://lore.kernel.org/r/1643613155-20215-1-git-send-email-quic_vjitta@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Fix list corruption in perf_cgroup_switch()

commit 5f4e5ce638e6a490b976ade4a40017b40abb2da0 upstream.

There's list corruption on cgrp_cpuctx_list. This happens on the
following path:

  perf_cgroup_switch: list_for_each_entry(cgrp_cpuctx_list)
      cpu_ctx_sched_in
         ctx_sched_in
            ctx_pinned_sched_in
              merge_sched_in
                  perf_cgroup_event_disable: remove the event from the list

Use list_for_each_entry_safe() to allow removing an entry during
iteration.

Fixes: 058fe1c0440e ("perf/core: Make cgroup switch visit only cpuctxs with cgroup events")
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220204004057.2961252-1-song@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: imx8mq: fix lcdif port node

commit 91f6d5f181f6629dd74ab71759fe92d3f4eff966 upstream.

The port node does not have a unit-address, remove it.
This fixes the warnings:
lcd-controller@30320000: 'port' is a required property
lcd-controller@30320000: 'port@0' does not match any of the regexes:
'pinctrl-[0-9]+'

Fixes: commit d0081bd02a03 ("arm64: dts: imx8mq: Add NWL MIPI DSI controller")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: octeon: Fix missed PTR->PTR_WD conversion

commit 50317b636e7184d15126e2dfc83db0963a38d31e upstream.

Fixes: fa62f39dc7e2 ("MIPS: Fix build error due to PTR used in more places")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Reduce log messages seen after firmware download

commit 5852ed2a6a39c862c8a3fdf646e1f4e01b91d710 upstream.

Messages around firmware download were incorrectly tagged as being related
to discovery trace events. Thus, firmware download status ended up dumping
the trace log as well as the firmware update message. As there were a
couple of log messages in this state, the trace log was dumped multiple
times.

Resolve this by converting from trace events to SLI events.

Link: https://lore.kernel.org/r/20220207180442.72836-1-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Remove NVMe support if kernel has NVME_FC disabled

commit c80b27cfd93ba9f5161383f798414609e84729f3 upstream.

The driver is initiating NVMe PRLIs to determine device NVMe support.  This
should not be occurring if CONFIG_NVME_FC support is disabled.

Correct this by changing the default value for FC4 support. Currently it
defaults to FCP and NVMe. With change, when NVME_FC support is not enabled
in the kernel, the default value is just FCP.

Link: https://lore.kernel.org/r/20220207180516.73052-1-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Makefile.extrawarn: Move -Wunaligned-access to W=1

commit 1cf5f151d25fcca94689efd91afa0253621fb33a upstream.

-Wunaligned-access is a new warning in clang that is default enabled for
arm and arm64 under certain circumstances within the clang frontend (see
LLVM commit below). On v5.17-rc2, an ARCH=arm allmodconfig build shows
1284 total/70 unique instances of this warning (most of the instances
are in header files), which is quite noisy.

To keep a normal build green through CONFIG_WERROR, only show this
warning with W=1, which will allow automated build systems to catch new
instances of the warning so that the total number can be driven down to
zero eventually since catching unaligned accesses at compile time would
be generally useful.

Cc: stable@vger.kernel.org
Link: https://github.com/llvm/llvm-project/commit/35737df4dcd28534bd3090157c224c19b501278a
Link: https://github.com/ClangBuiltLinux/linux/issues/1569
Link: https://github.com/ClangBuiltLinux/linux/issues/1576
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sgx: Silence softlockup detection when releasing large enclaves

commit 8795359e35bc33bf86b6d0765aa7f37431db3b9c upstream.

Vijay reported that the "unclobbered_vdso_oversubscribed" selftest
triggers the softlockup detector.

Actual SGX systems have 128GB of enclave memory or more.  The
"unclobbered_vdso_oversubscribed" selftest creates one enclave which
consumes all of the enclave memory on the system. Tearing down such a
large enclave takes around a minute, most of it in the loop where
the EREMOVE instruction is applied to each individual 4k enclave page.

Spending one minute in a loop triggers the softlockup detector.

Add a cond_resched() to give other tasks a chance to run and placate
the softlockup detector.

Cc: stable@vger.kernel.org
Fixes: 1728ab54b4be ("x86/sgx: Add a page reclaimer")
Reported-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org> (kselftest as sanity check)
Link: https://lkml.kernel.org/r/ced01cac1e75f900251b0a4ae1150aa8ebd295ec.1644345232.git.reinette.chatre@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (dell-smm) Speed up setting of fan speed

commit c0d79987a0d82671bff374c07f2201f9bdf4aaa2 upstream.

When setting the fan speed, i8k_set_fan() calls i8k_get_fan_status(),
causing an unnecessary SMM call since from the two users of this
function, only i8k_ioctl_unlocked() needs to know the new fan status
while dell_smm_write() ignores the new fan status.
Since SMM calls can be very slow while also making error reporting
difficult for dell_smm_write(), remove the function call from
i8k_set_fan() and call it separately in i8k_ioctl_unlocked().

Tested on a Dell Inspiron 3505.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20211021190531.17379-6-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mhi: pci_generic: Add mru_default for Cinterion MV31-W

commit 05daa805a86c831ad9692f6f15e1b877c8f10638 upstream.

For default mechanism, product would use default MRU 3500 if
they didn't define it. But for Cinterion MV31-W, there is a known
issue which MRU 3500 would lead to data connection lost.
So we align it with Qualcomm default MRU settings.

Link: https://lore.kernel.org/r/20220119102519.5342-1-slark_xiao@163.com
[mani: Modified the commit message to reflect Cinterion MV31-W and CCed stable]
Fixes: 87693e092bd0 ("bus: mhi: pci_generic: Add Cinterion MV31-W PCIe to MHI")
Cc: stable@vger.kernel.org # v5.14 +
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220205135731.157871-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mhi: pci_generic: Add mru_default for Foxconn SDX55

commit a0572cea8866230ac13da6358c88075f89e99b20 upstream.

For default mechanism, product would use default MRU 3500 if
they didn't define it. But for Foxconn SDX55, there is a known
issue which MRU 3500 would lead to data connection lost.
So we align it with Qualcomm default MRU settings.

Link: https://lore.kernel.org/r/20220119101213.5008-1-slark_xiao@163.com
[mani: Added pci_generic prefix to subject and CCed stable]
Fixes: aac426562f56 ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support")
Cc: stable@vger.kernel.org # v5.12+
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220205135731.157871-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>