drm/i915/display: split out modeset verification code

Add new file intel_modeset_verify.c for high level modeset verification
code to declutter intel_display.h. The new file is supposed to be about
crtc/encoder/connector verification; the state verification for very
specific functionality such as plls or wm should be placed next to the
code it verifies.

Fix some minor checkpatch issues while at it.

v2: Rebase

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b9b47c14316a9edb772a8b8f934eabe7e928dd76.1655372759.git.jani.nikula@intel.com

drm/i915/mpllb: move mpllb state check to intel_snps_phy.c

Keep the mpllb implementation details together in intel_snps_phy.c. Also
declutter intel_display.c.

v2: intel_mpllb_verify_state -> void intel_mpllb_state_verify (Ville)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e7340bb0e399aeb2676c4820461187eeb1d4db15.1655372759.git.jani.nikula@intel.com

drm/i915/mpllb: use I915_STATE_WARN() for state mismatch warnings

The pipe_config_mismatch() function is primarily for logging comparison
results.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/167e54e13a9a41c944910a274e79cbfd39d963b1.1655372759.git.jani.nikula@intel.com

drm/i915/dpll: move shared dpll state verification to intel_dpll_mgr.c

Keep the shared dpll implementation details together by moving the dpll
state verification to intel_dpll_mgr.c. Also declutter intel_display.c.

v2: intel_shared_dpll_verify_state -> intel_shared_dpll_state_verify (Ville)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/85b02186f1269dd374d11db35900130547a5f2c6.1655372759.git.jani.nikula@intel.com

drm/i915/wm: move wm state verification to intel_pm.c

By moving wm state verification to intel_pm.c, we can make a bunch of
functions static, hiding the wm details better. Also declutter
intel_display.c.

v2: intel_wm_state_verify -> intel_wm_verify_state (Ville)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2a7e3141e87181c07eaddcd9c352b8810550b0ce.1655372759.git.jani.nikula@intel.com

drm/i915: Implement w/a 22010492432 for adl-s

adl-s needs the combo PLL DCO fraction w/a as well.
Gets us slightly more accurate clock out of the PLL.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613201439.23341-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>

drm/i915/bios: Introduce panel_bits() and panel_bool()

Abstract the bit extraction from the VBT per-panel bitfields
slightly.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615151445.8531-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/bios: Don't parse the DPS panel type when the VBT does not have it

Older VBTs don't have all the stuff we've defined for the
LVDS options block (40). In particular we're currently parsing
the DPS panel type bits even though they may not exist, which
could mean we end up flagging the machine as supporting static
DRRS when the VBT declared no such thing.

We don't actually have a clear idea which VBT versions have
which bits so we rely on the block size instead.

Here's a quick list from my VBT stash:
mgm version 108 -> 4 bytes
alv version 120 -> 4 bytes
cst version 134 -> 14 bytes
pnv version 144 -> 14 bytes
cl  version 142 -> 16 bytes
ctg version 155 -> 24 bytes

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615151445.8531-2-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/bios: Move panel_type stuff out of parse_panel_options()

Parsing the panel_type is a bit special and should be done
before we parse anything else potentially panel-specific from
the VBT. So move it out from parse_panel_options(). It doesn't
neet to be there anyway since it'll do its own LVDS options
block lookup.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615151445.8531-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Remove bogus LPT iCLKIP WARN

The WARN shouldn't have been added yet. For the moment the
clock that gets passed here is just what the user has requested
(via the modeline) and may not be exactly what iCLKIP can
generate.

Later on the plan is to change things so that we already get
passed the exact clock here, at which point the WARN should
be reintroduced.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6246
Fixes: 97708335b04d ("drm/i915: Introduce struct iclkip_params")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616095530.15024-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Sanitize underrun reporting before turning off any pipes

Make sure FIFO underrun reporting is flagged as disabled very
early during the state readout so that we don't get any
spurious FIFO underruns reports from intel_crtc_disable_noatomic().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615174851.20658-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Extract intel_sanitize_fifo_underrun_reporting()

Pull the underrun status sanitation into its own helper.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615174851.20658-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Do not start connector polling on headless sku

Connector polling is waking up the polled device. Polling
is unnecessary if our device is known to not have display.

Fix this and save some power by disabling starting connector
polling when we are having headless sku. Use information from
opregion.

v2: Move headless sku check into INTEL_DISPLAY_ENABLED macro

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610085429.52935-4-jouni.hogander@intel.com

drm/i915: Do not start connector polling if display is disabled

Currently we are starting connector polling if display is disabled
using disable_display module parameter. Polling is just returning
always "not connected" state. This can be optimized by not starting
polling at all.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610085429.52935-3-jouni.hogander@intel.com

drm/i915/opregion: add function to check if headless sku

Export headless sku bit (bit 13) from opregion->header->pcon as an
interface to check if our device is headless configuration.

This is mainly targeted for hybrid gfx systems. E.g. when display
is not supposed to be connected discrete graphics card it's
opregion can inform this is headless graphics card.

v3: Dummy version is now static inline function
v2: Check also opregion version

Bspec: 53441
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610085429.52935-2-jouni.hogander@intel.com

drm/i915/bios: split ddi port parsing and debug printing

Split ddi port parsing and debug printing to clarify the functional
parts of parse_ddi_port(), which are quite small nowadays.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/34e0dd92b7f7e9076df1f01b542347e599ec6653.1654870175.git.jani.nikula@intel.com

drm/i915/bios: no need to pass i915 to parse_ddi_port()

i915 is available via devdata, grab it there instead of passing.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/45c97c93bb9262c08aefa7b4bfe31f3f3481c998.1654870175.git.jani.nikula@intel.com

drm/i915/bios: use dvi and hdmi support helpers

Improve clarity by using the helpers we have.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3a0b52593f19a465dc0dd898db5f6bf13537d734.1654870175.git.jani.nikula@intel.com

drm/i915: Skip FDI vs. dotclock sanity check during readout

The VBIOS/GOP may not program the FDI M/n vs. dotclock entirely
consistently. Eg. on a SNB Thinkpad X220 LVDS I see dotclock of
69.286 MHz (the best the DPLL can do) vs. FDI M/N 69.3 MHz
(matches what the EDID actually declares).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-15-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Introduce struct iclkip_params

Pull the various iCLKIP parameters into a struct. Later on
we'll reuse this during the state computation to determine
the exact dotclock the hardware will be generating for us.

v2: Don't lose the phaseinc calculation
v3: Drop the misplaced '#include <intel_pch_refclk.h>' from intel_crt.c (Jani)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504212109.26369-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Extract intel_crtc_dotclock()

Extract intel_crtc_dotclock() from ddi_dotclock_get(). We'll reuse
this during state computation in order to determine the actual final
dotclcok after the DPLL computation has been done (which may not give
us the exact same port_clock that we fed in).

v2: Add the prototype

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504123350.13235-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/display: Fix handling of enable_psr parameter

Commit 3cf050762534 ("drm/i915/bios: Split VBT data into per-panel vs.
global parts") cause PSR to be disabled when enable_psr has the
default value and there is at least one DP port that do not supports
PSR.

That was happening because intel_psr_init() is called for every DP
port and then enable_psr is globaly set to 0 based on the PSR support
of the DP port.

Here dropping the enable_psr overwritten and using the VBT PSR value
when enable_psr is set as default.

Fixes: 3cf050762534 ("drm/i915/bios: Split VBT data into per-panel vs. global parts")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220608203344.513082-1-jose.souza@intel.com

drm/i915: Parse max link rate from the eDP BDB block

The eDP BDB block has gained yet another max link rate field.
Let's parse it and consult it during the source rate filtering.

v2: *20 instead of *2 to get the correct units (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220602205723.11341-1-ville.syrjala@linux.intel.com

drm/i915: Update eDP fast link training link rate parsing

We're not parsing the 5.4 Gbps value for the old eDP fast link
training link rate, nor are we parsing the new fast link training
link rate field. Remedy both.

Also we'll now use the actual link rate instead of the DPCD BW
register value.

Note that we're not even using this information for anything
currently, so should perhaps just nuke it all unless someone
is planning on implementing fast link training finally...

v2: Stop using the DPCD BW values (Jani)
    *20 instead of *2 to get the rate in correct units (Jani)

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220602205649.11283-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Initialize eDP source rates after per-panel VBT parsing

We'll need to know the VBT panel_type before we can determine the
maximum link rate for eDP. To that end move
intel_dp_set_source_rates() & co. to be called after the per-panel
VBT parsing has been done.

intel_dp_mst_encoder_init() depends on the source rates so we'll
have to do it a bit later as well.

v2: Fix the intel_dp_mst_encoder_init() oops

Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603165841.15481-1-ville.syrjala@linux.intel.com

drm/i915/overlay: remove redundant GEM_BUG_ON()

There's an early return for !engine->kernel_context.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516081015.1058987-1-jani.nikula@intel.com

drm/i915/pxp: fix sparse warning for not declared symbol

Fix:

drivers/gpu/drm/i915/pxp/intel_pxp_debugfs.c:61:6: warning: symbol
'intel_pxp_debugfs_register' was not declared. Should it be static?

Sort and remove the redundant pxp prefixes from the includes while at
it.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220506120405.2582372-1-jani.nikula@intel.com

drm/i915: remove noisy logs in intel_dp_dsc_get_output_bpp()

The intel_dp_dsc_get_output_bpp() function outputs two lines of
unconditional logs, which was okay when it was called only once.  But
now, we also call this function from intel_dp_mode_valid(), which is
in turn called for every mode we need to validate.  This causes a lot
of useless noise.

Remove the unconditional prints to avoid spamming the logs.  Also
remove one more print that is not unconditional, but is related.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607074433.1202917-1-luca@coelho.fi

drm/i915/utils: throw out unused stuff

Remove some of the unused helpers from i915_utils.h.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607094207.536699-3-jani.nikula@intel.com

drm/i915/drv: drop intel_bios.h include

No longer needed after panel data was moved.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607094207.536699-2-jani.nikula@intel.com

drm/i915/tasklet: separate local hacks around struct tasklet_struct

Add a dedicated file for the local functions around struct
tasklet_struct. Far from ideal, but better placed in a dedicated file
than i915_gem.h.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607094207.536699-1-jani.nikula@intel.com

drm/i915/display/fbc: Do not apply WA 22014263786 to DG2

This workaround brings some regressions to DG2 and if really necessary
for DG2 an alternative workaround will be implemented.

BSpec: 54077
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220602201730.199418-1-jose.souza@intel.com

drm/i915/regs: split out intel audio register definitions

Split out audio registers to a header of its own to reduce the size of
i915_reg.h.

TODO: Remove direct audio register access from intel_ddi.c. However,
unification of audio get config is cumbersome due to the audio enable
bit being in the DP or HDMI registers on older platforms.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220602094542.1386151-1-jani.nikula@intel.com

drm/i915/display/adlp: More updates to voltage swing table

Voltage swing table updated for eDP HBR3

Bspec: 49291
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220602135719.1093081-1-balasubramani.vivekanandan@intel.com

drm/i915: Treat DMRRS as static DRRS

Some machines declare DRRS type = seamless, DRRS = no, DMRRS = yes.
I *think* DMRRS stands for "dynamcic media refresh rate", and
I suspect the way it's meant to work is that it lets the driver
switch refresh rates to match the frame rate for media playback.
Obviously for us all that kind of policy stuff is entirely up to
userspace, so the only thing we may do is make the extra refresh
rate(s) available.

So let's treat this case as just static DRRS for now. In the
future We might want to differentiate the "seamless w/ downclocking"
vs. "seamless w/o downclocking" cases so that we could do seamless
refresh rate changes for systems that only claim to support DMRRS.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/125
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220531191844.11313-7-ville.syrjala@linux.intel.com

drm/i915/bios: Define more BDB contents

Add a bunch of new struff we're missing in various BDB blocks.

TODO: Bunch of these might actually need to be taken
into use...

v2: s/lfp_features/lfp_power/features/ (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220531191844.11313-6-ville.syrjala@linux.intel.com

drm/i915/bios: Fix aggressiveness typos

Fix various typos around "aggressiveness". Note that
the VBT spec also sometimes missspells it as
"agressiveness" so I guess that's where some of the typos
came from.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220531191844.11313-5-ville.syrjala@linux.intel.com

drm/i915: Accept more fixed modes with VRR panels

It seem that when dealing with VRR capable eDP panels we need
to accept fixed modes with variable vblank length (which is what
VRR varies dynamically). Typically the preferred mode seems to be
a non-VRR more (lowish dotclock/refresh rate + short vblank).

We also have examples where it looks like even the hblank length
is a bit different between the preferred mode vs. VRR mode(s).
So let's just accept anything that has matching hdisp+vdisp+flags.

v2: Document that is_alt_drrs_mode() is a subset of is_alt_vrr_mode() (Jani)

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/125
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220531191844.11313-4-ville.syrjala@linux.intel.com

drm/i915: Print out rejected fixed modes

To help with debugging DRRS/VRR panel init let's dump out all
the fixed modes we rejected for whatever reason.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220531191844.11313-3-ville.syrjala@linux.intel.com

drm/i915: Parse VRR capability from VBT

VBT seems to have an extra flag for VRR vs. not. Let's consult
that for eDP panels.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220531191844.11313-2-ville.syrjala@linux.intel.com

drm/i915/display: stop using BUG()

Avoid bringing the entire machine down even if there's a bug that
shouldn't happen, but won't corrupt the system either. Log them loudly
and limp on.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220531162527.1062319-1-jani.nikula@intel.com

drm/i915: Require an exact DP link freq match for the DG2 PLL

No idea why the DG2 PLL DP link frequency calculation is allowing
a non-exact match. That makes no sense so get rid of it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-24-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Matt Roper <matthew.d.roper@intel.com>

drm/i915: Check hw.enable and hw.active in intel_pipe_config_compare()

Don't see a real reson not to check hw.active and hw.enable in
intel_pipe_config_compare(). We do have some checks for them
at a higher level, but I think better check them also in
intel_pipe_config_compare() in case something else doesn't
do a thorough enough job.

Also shuffle the mst_master_transcoder check next to the
cpu_transcoder check for a bit of consistency.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-21-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Improve modeset debugs

Use the "[CRTC:%d:%s]'/etc. format for some of the modeset debugs
so we know more about what has happened during the modeset state
computation.

Also tweak the connector bpp debug message a bit to make it less
confusing.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: s/pipe_config/crtc_state/

Rename some of the 'pipe_config's to the more modern
'crtc_state'.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Adjust intel_modeset_pipe_config() & co. calling convention

Use the state+crtc calling convention for intel_modeset_pipe_config()
and othere related functions. Many of these need the full atomic state
anyway so passing it all the way through is just nicer than having to
worry about whether it can actually be extracted from eg. the crtc
state passed in.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Extract PIPE_CONF_CHECK_RECT()

Deduplicate the drm_rect comparisons.

We also drop the redundant pch_pfit.enabled check since the
pch_pfit.dst rectanble will be zeroed anyway when the pfit
is not enabled.

v2: Document why we drop the enabled check (Jani)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Extract PIPE_CONF_CHECK_TIMINGS()

Deduplicate the crtc_ timings comparisons.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Clean up DPLL related debugs

The debugs in lower level DPLL code don't really provide any
useful extra information AFAICS. Better just streamline the
code and just put the necessary debugs (to identify at which
step the modeset failed) into the higher level code. In
addition we'll get the full state dump as well, which should
hopefully have enough information to figure out what went wrong.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-4-ville.syrjala@linux.intel.com

drm/i915: Split shared dpll .get_dplls() into compute and get phases

Split the DPLL state computation into a separate function
from the current .get_dplls() which currently serves a dual duty
by also reserving the shared DPLLs.

v2: s/false/-EINVAL/ (Jani)

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/tc: Don't default disconnected legacy Type-C ports to TBT mode (v2)

Commit 30e114ef4b16 ("drm/i915/tc: Check for DP-alt, legacy sinks before
taking PHY ownership") defaults any disconnected Type-C ports to TBT-alt
mode which presents a problem (which could most likely result in a system
hang) when userspace forces a modeset on a Type-C port that is wired for
legacy HDMI. The following warning is seen when Weston forces a modeset
on a disconnected legacy Type-C port (HDMI) on a TGL based Gigabyte system:
(https://www.gigabyte.com/Mini-PcBarebone/GB-BSi3-1115G4-rev-10#ov)

Missing case (clock == 173000)
WARNING: CPU: 1 PID: 438 at drivers/gpu/drm/i915/display/intel_ddi.c:245
icl_ddi_tc_enable_clock.cold+0x16a/0x1cf [i915]
CPU: 1 PID: 438 Comm: kworker/u8:3 Tainted: G     U  W   E
5.18.0-rc5-drm-tip+ #20
Hardware name: GIGABYTE GB-BSi3-1115G4/GB-BSi3-1115G4, BIOS F9
10/16/2021
Workqueue: i915_modeset intel_atomic_commit_work [i915]
RIP: 0010:icl_ddi_tc_enable_clock.cold+0x16a/0x1cf [i915]
Code: 74 6c 7f 10 81 fd d0 78 02 00 74 6d 81 fd b0 1e 04 00 74 70 48 63
d5 48 c7 c6 c0 7b ab c0 48 c7 c7 20 75 ab c0 e8 b8 b5 c1 f0 <0f> 0b 45
31 ed e9 fb fe ff ff 49 63 d5
 48 c7 c6 80 7b ab c0 48 c7
RSP: 0018:ffff8882522c78f0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed104a458f10
RBP: 0000000000011558 R08: ffffffffb078de4e R09: ffff888269ca748b
R10: ffffed104d394e91 R11: 0000000000000000 R12: ffff888255a318f8
R13: 0000000000000002 R14: ffff888255a30000 R15: ffff88823ef00348
FS:  0000000000000000(0000) GS:ffff888269c80000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd7afa42000 CR3: 0000000255c02004 CR4: 00000000007706e0
PKRU: 55555554
Call Trace:
<TASK>
intel_ddi_pre_enable.cold+0x96/0x5bf [i915]
intel_encoders_pre_enable+0x10e/0x140 [i915]
hsw_crtc_enable+0x207/0x99d [i915]
? ilk_crtc_enable.cold+0x2a/0x2a [i915]
? prepare_to_wait_exclusive+0x120/0x120
intel_enable_crtc+0x9a/0xf0 [i915]
skl_commit_modeset_enables+0x466/0x820 [i915]
? intel_commit_modeset_enables+0xd0/0xd0 [i915]
? intel_mbus_dbox_update+0x1ed/0x250 [i915]
intel_atomic_commit_tail+0xf2d/0x3040 [i915]
_raw_spin_lock_irqsave+0x87/0xe0
_raw_read_unlock_irqrestore+0x40/0x40
__update_load_avg_cfs_rq+0x70/0x5c0
__i915_sw_fence_complete+0x85/0x3b0 [i915]
? intel_get_crtc_new_encoder+0x190/0x190 [i915]
? sysvec_irq_work+0x13/0x90
? asm_sysvec_irq_work+0x12/0x20
? _raw_spin_lock_irq+0x82/0xd0
? read_word_at_a_time+0xe/0x20
? process_one_work+0x393/0x690
process_one_work+0x393/0x690
worker_thread+0x2b7/0x620
? process_one_work+0x690/0x690
kthread+0x15a/0x190
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30

Continuing with the modeset without setting the DDI clock results in
more warnings and eventually a system hang. This does not seem to
happen with disconnected legacy or DP-alt DP ports because the clock
rate defaults to 162000 (which is a valid TBT clock) during the link
training process. Therefore, to fix this issue, this patch avoids
setting disconnected Type-C legacy ports to TBT-alt mode which prevents
the selection of TBT PLL when a modeset is forced.

v2: (Imre)
- Retain the check for legacy hotplug live status to account for
incorrect VBTs.

Cc: Imre Deak <imre.deak@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220526001939.4031112-2-vivek.kasireddy@intel.com

drm/i915/bios: Determine panel type via PNPID match

Apparently when the VBT panel_type==0xff we should trawl through
the PNPID table and check for a match against the EDID. If a
match is found the index gives us the panel_type.

Tried to match the Windows behaviour here with first looking
for an exact match, and if one isn't found we fall back to
looking for a match w/o the mfg year/week.

v2: Rebase due to vlv_dsi changes
v3: Adjust to .get_panel_type() vfunc

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5545
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-14-ville.syrjala@linux.intel.com

drm/i915/bios: Split VBT data into per-panel vs. global parts

Move the panel specific VBT parsing to happen during the
output probing stage. Needs to be done because the VBT
parsing will need to look at the EDID to determine
the correct panel_type on some machines.

We split the parsed VBT data (i915->vbt) along the same
boundary. For the moment we just hoist all the panel
specific stuff into connector->panel.vbt since that seems
like the most convenient place for eg. the backlight code.

Note that we simply drop the drrs type check from
intel_drrs_frontbuffer_update() since that operates on the whole
device rather than a specific connector/encoder. But the check
was just a micro optimization so removing it doesn't actually
mattter for correctness.

TODO: Lot's of cleanup to be done in the future. Eg. most of
the DSI stuff could probably be eliminated entirely and just
parsed on demand during DSI init.

v2: Note the intel_drrs_frontbuffer_update() change

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/bios: Split VBT parsing to global vs. panel specific parts

Parsing the panel specific data (anything that depends on panel_type)
from VBT is currently happening too early. Split the whole thing
into global vs. panel specific parts so that we can start doing
the panel specific parsing at a later time.

v2: Clarify that this is about panel_type (Jani)
    Split out the leak checks (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-12-ville.syrjala@linux.intel.com

drm/i915/bios: Split parse_driver_features() into two parts

We use the "driver features" block for two different kinds
of data: global data, and per panel data. Split the function
into two parts along that line so that we can start doing the
parsing in two different locations.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-11-ville.syrjala@linux.intel.com

drm/i915/pps: Keep VDD enabled during eDP probe

Disable the delayed VDD off work during the eDP probe.
If we never turn off the VDD then we can't violate the
panel's power sequencing delays despite not having read
them out yet from the VBT.

This is mostly a belt+suspenders type of thing since the
the timeout we'd use for the delayed work should be long
enough that this won't normally happen. But I don't really
like relying on timeouts for correctless so might as well
make sure.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/pps: Reinit PPS delays after VBT has been fully parsed

During the eDP probe we may not yet know the panel_type used
to index the VBT panel tables. So the initial eDP probe will have
to be done without that, and thus we won't yet have the PPS delays
from the VBT. Once the VBT has been fully parse we should reinit
the PPS delays to make sure it's fully accounted for.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/pps: Split PPS init+sanitize in two

Split the PPS init to something we do at the start of the eDP
probe and a second part we do at the end.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/pps: Stash away original BIOS programmed PPS delays

In order to do the panel VBT parsing after the EDID read
(needed to determine panel_type from PNPID) we need to stash
away the original BIOS programmed PPS delays so that we
can consult them again when we reinit the PPS delays after
the VBT parsing has been done.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/pps: Don't apply quirks/etc. to the VBT PPS delays if they haven't been initialized

Skip QUIRK_INCREASE_T12_DELAY and the t11_t12 adjustment of the
VBT PPS delays if we've not yet initialized them. Will be important
later when the PPS delay init can happen before VBT parsing.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/pps: Introduce pps_delays_valid()

Add a small helper that determines if the PPS delays have been
initialized or not.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/pps: Split pps_init_delays() into distinct parts

Split each of the hw/vbt/spec PPS delay initialization into
separate functions to make the whole thing less cluttered.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Extract intel_edp_fixup_vbt_bpp()

We have the same "override eDP VBT bpp with the current bpp" code
duplciated in two places. Extract it to a helper function.

TODO: Having this in .get_config() is pretty ugly. Should probably
try to move it somewhere else (setup_hw_state()/etc.)...

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Pass intel_connector to intel_vrr_is_capable()

Pass intel_connector instead of drm_connector to
intel_vrr_is_capable(). Will result in less ugly casts.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/display/adl_p: Updates to HDMI combo PHY voltage swing table

New updates to HDMI combo PHY voltage swing tables. Actually with this
update (bspec updated on 08/17/2021), the values are reverted back to be
same as icelake for HDMI combo PHY.

Bspec: 49291
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220526064935.969225-1-balasubramani.vivekanandan@intel.com

drm/i915/dg2: Support 4k@30 on HDMI

This patch adds a fix to support 297MHz of dot clock by calculating
the pll values using synopsis algorithm.
This will help to support 4k@30 mode for HDMI monitors on DG2.

v2: As per the algorithm, set MPLLB VCO range control bits to 3,
in register SNPS_PHY_MPLLB_DIV for 297Mhz. (Matt)

v3: Fix typo. (Ankit)

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220525080401.1253511-1-ankit.k.nautiyal@intel.com

drm/i915: fix typos in comments

Spelling mistakes (triple letters) in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220521111145.81697-90-Julia.Lawall@inria.fr

drm/i915/d12+: Disable DMC firmware flip queue handlers

Based on a bspec update the DMC firmware's flip queue handling events
need to be disabled before enabling DC5/6. i915 doesn't use the flip
queue feature atm, so disable it already after loading the firmware.
This removes some overhead of the event handler which runs at a 1 kHz
frequency.

Bspec: 49193, 72486, 72487

v2:
- Fix the DMC pipe A register offsets for GEN12.
- Disable the events on DG2 only on pipe A..D .
v3: (Lucas)
- Add TODO: to clarify the disabling sequence on all D13+
- s/intel_dmc_has_fw_payload/has_dmc_id_fw/
- s/simple_flipq/flipq/
- s/_GEN12,_GEN13/TGL_,ADLP_/
- s/MAINDMC/DMC/
v4:
- Only disable flip queues on TGL/DG2, as on other platforms the
  corresponding event handlers don't exist.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> # v1
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220521130808.637449-1-imre.deak@intel.com

drm/i915: Rename block_size()/block_offset()

Give block_size()/block_offset() a "raw_" prefix since they
both operate on the "raw" (as in not duplicated) BDB block
contents.

What actually spurred this was a conflict between intel_bios.c
block_size() vs. block_size() from blkdev.h. That only
happened to me on a custom tree where we somehow manage to
include blkdev.h into intel_bios.c. But I think the rename
makes sense anyway to clarify the purpose of these functions.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519140010.10600-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dsi: fix VBT send packet port selection for ICL+

The VBT send packet port selection was never updated for ICL+ where the
2nd link is on port B instead of port C as in VLV+ DSI.

First, single link DSI needs to use the configured port instead of
relying on the VBT sequence block port. Remove the hard-coded port C
check here and make it generic. For reference, see commit f915084edc5a
("drm/i915: Changes related to the sequence port no for") for the
original VLV specific fix.

Second, the sequence block port number is either 0 or 1, where 1
indicates the 2nd link. Remove the hard-coded port C here for 2nd
link. (This could be a "find second set bit" on DSI ports, but just
check the two possible options.)

Third, sanity check the result with a warning to avoid a NULL pointer
dereference.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5984
Cc: stable@vger.kernel.org # v4.19+
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220520094600.2066945-1-jani.nikula@intel.com

drm/i915/pcode: Add a couple of pcode helpers

Some dGfx pcode commands take additional sub-commands and parameters. Add a
couple of helpers to help formatting these commands to improve code
readability.

v2: Fixed commit author (Rodrigo)
v3: Function rename and convert to new uncore interface for pcode functions
    Remove unnecessary #define's (Andi)
v4: Another function rename

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519085732.1276255-3-tvrtko.ursulin@linux.intel.com

drm/i915/pcode: Extend pcode functions for multiple gt's

Each gt contains an independent instance of pcode. Extend pcode functions
to interface with pcode on different gt's. To avoid creating dependency of
display functionality on intel_gt, pcode function interfaces are exposed in
terms of uncore rather than intel_gt. Callers have been converted to pass
in the appropritate (i915 or intel_gt) uncore to the pcode functions.

v2: Expose pcode functions in terms of uncore rather than gt (Jani/Rodrigo)
v3: Retain previous function names to eliminate needless #defines (Rodrigo)
v4: Move out i915_pcode_init() to a separate patch (Tvrtko)
    Remove duplicated drm_err/drm_dbg from intel_pcode_init() (Tvrtko)

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519085732.1276255-2-tvrtko.ursulin@linux.intel.com
[tursulin: fixup merge conflict]

drm/i915: Introduce has_media_ratio_mode

Media ratio mode (the ability for media IP to work at a different frequency
from the GT) is available for a subset of dGfx platforms supporting
GuC/SLPC. Introduce 'has_media_ratio_mode' flag in intel_device_info to
identify these platforms and set it for XEHPSDV and DG2/ATS-M.

Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519085732.1276255-1-tvrtko.ursulin@linux.intel.com
[tursulin: fixup merge conflict]

drm/i915/reg: fix undefined behavior due to shift overflowing the constant

Use REG_GENMASK() and REG_FIELD_PREP() to avoid errors due to
-fsanitize=shift.

References: https://lore.kernel.org/r/20220405151517.29753-12-bp@alien8.de
Reported-by: Borislav Petkov <bp@suse.de>
Reported-by: Ruiqi GONG <gongruiqi1@huawei.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220518113315.1305027-1-jani.nikula@intel.com

drm/i915: Ensure damage clip area is within pipe area

Current update area calculation is not handling situation where
e.g. cursor plane is fully or partially outside pipe area.

Fix this by checking damage area against pipe_src area using
drm_rect_intersect.

v2: Set x1 and x2 in damaged_area initialization
v3: Move drm_rect_intersect into clip_area_update
v4: draw_area -> pipe_src

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5440
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220513142811.779331-3-jouni.hogander@intel.com

drm/i915/psr: Use full update In case of area calculation fails

Currently we have some corner cases where area calculation fails.  For
these sel fetch area calculation ends up having update area as y1 = 0,
y2 = 4. Instead of these values safer option is full update.

One of such for example is big fb with offset. We don't have usable
offset in psr2_sel_fetch_update. Currently it's open what is the
proper way to fix this corner case. Use full update for now.

v2: Commit message modified
v3: Print out debug info once when area calculation fails
v4: Use drm_info_once
v5: pipeA -> "pipe %c", pipe_name(crtc-pipe)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220513142811.779331-2-jouni.hogander@intel.com

drm/i915: Use drm_dbg for rpm logging

RPM suspend/resume also supported on gfx platforms which doesn't have
kms support and even on platforms without any connected display panel.
There is no good reason to log rpm suspend/resume debug message with
drm_dbg_kms() therefore changing it to drm_dbg().

Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511130455.22028-1-anshuman.gupta@intel.com

drm/i915/audio: fix audio code enable/disable pipe logging

Need to use pipe_name(pipe) instead of pipe directly.

Fixes: 1f31e35f2e88 ("drm/i915/audio: unify audio codec enable/disable debug logging")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220512161638.272601-1-jani.nikula@intel.com

drm/i915/dmc: Add MMIO range restrictions

Bspec has added some steps that check forDMC MMIO range before
programming them

v2: Fix for CI
v3: move register defines to .h (Anusha)
- Check MMIO restrictions per pipe
- Add MMIO restricton for v1 dmc header as well (Lucas)
v4: s/_PICK/_PICK_EVEN and use it only for Pipe DMC scenario.
- clean up sanity check logic.(Lucas)
- Add MMIO range for RKL as well.(Anusha)
v5: Use DISPLAY_VER instead of per platform check (Lucas)

BSpec: 49193

Cc: stable@vger.kernel.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511000847.1068302-1-anusha.srivatsa@intel.com

drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c

Fix the following sparse warnings:

drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2431:34:    unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2431:34:    int enum port
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37:    unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37:    int enum port
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43:    unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43:    unsigned int enum aux_ch
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35:    unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35:    unsigned int enum aux_ch

Fixes: 979e1b32e0e2 ("drm/i915: Sanitize the port -> DDI/AUX power domain mapping for each platform")
Reported-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510114957.406070-1-imre.deak@intel.com

drm/i915/dmc: Load DMC on DG2

Add Support for DC states on Dg2.

v2: Add dc9 as the max supported DC states and disable DC5.
v3: set max_dc to 0. (Imre)

Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>(v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504202213.740200-2-anusha.srivatsa@intel.com

drm/i915: remove single-use GEM_DEBUG_EXEC()

Reduce the magic of what's going on in GEM_DEBUG_EXEC() by expanding it
inline and being explicit about it. It's as single use case anyway, so
the macro feels overkill.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504183716.987793-2-jani.nikula@intel.com

drm/i915: remove unused GEM_DEBUG_DECL() and GEM_DEBUG_BUG_ON()

There are already too many choices here, take away the unused ones.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504183716.987793-1-jani.nikula@intel.com

drm/i915: Respect VBT seamless DRRS min refresh rate

Make sure our choice of downclock mode respects the VBT
seameless DRRS min refresh rate limit.

v2: s/vrefesh/vrefresh/ (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-10-ville.syrjala@linux.intel.com

drm/i915/bios: Parse the seamless DRRS min refresh rate

Extract the seamless DRRS min refresh rate from the VBT.

v2: Do a version check

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-9-ville.syrjala@linux.intel.com

drm/i915/bios: Refactor panel_type code

Make the panel type code a bit more abstract along the
lines of the source of the panel type. For the moment
we have three classes: OpRegion, VBT, fallback.
Well introduce another one shortly.

We can now also print out all the different panel types,
and indicate which one we ultimately selected. Could help
with debugging.

v2: Add .get_panel_type() vfunc (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-8-ville.syrjala@linux.intel.com

drm/i915/bios: Extract get_panel_type()

Pull the code to determine the panel type into its own set of
sane functions.

v2: rebase

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-7-ville.syrjala@linux.intel.com

drm/i915/bios: Assume panel_type==0 if the VBT has bogus data

Just assume panel_type==0 always if the VBT gives us bogus data.
We actually already do this everywhere else except in
parse_panel_options() since we just leave i915->vbt.panel_type
zeroed. This also seems to be what Windows does.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-6-ville.syrjala@linux.intel.com

drm/i915/bios: Document the mess around the LFP data tables

Document the fact that struct lvds_lfp_data_entry can't be used
directly and instead must be accessed via the data table pointers.

Also remove the bogus comment implying that there might be a
variable number of panel entries in the table. There are always
exactly 16.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-5-ville.syrjala@linux.intel.com

drm/i915/bios: Get access to the tail end of the LFP data block

We need to start parsing stuff from the tail end of the LFP data block.
This is made awkward by the fact that the fp_timing table has variable
size. So we must use a bit more finesse to get the tail end, and to
make sure we allocate enough memory for it to make sure our struct
representation fits.

v2: Rebase due to the preallocation of BDB blocks
v3: Rebase due to min_size WARN relocation
v4: Document BDB_LVDS_LFP_DATA vs. BDB_LVDS_LFP_DATA_PTRS order (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-4-ville.syrjala@linux.intel.com

drm/i915/bios: Generate LFP data table pointers if the VBT lacks them

Modern VBTs no longer contain the LFP data table pointers
block (41). We are expecting to have one in order to be able
to parse the LFP data block (42), so let's make one up.

Since the fp_timing table has variable size we must somehow
determine its size. Rather than just hardcode it we look for
the terminator bytes (0xffff) to figure out where each table
entry starts. dvo_timing, panel_pnp_id, and panel_name are
expected to have fixed size.

This has been observed on various machines, eg. TGL with BDB
version 240, CML with BDB version 231, etc. The most recent
VBT I've observed that still had block 41 had BDB version
228. So presumably the cutoff (if an exact cutoff even exists)
is somewhere around BDB version 229-231.

v2: kfree the thing we allocated, not the thing+3 bytes
v3: Do the debugprint only if we found the LFP data block
v4: Fix t0 null check (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-3-ville.syrjala@linux.intel.com

drm/i915/bios: Reorder panel DTD parsing

Reorder things so that we can parse the entier LFP data block
in one go. For now we just stick to parsing the DTD from it.

Also fix the misleading comment about block 42 being deprecated.
Only the DTD part is deprecated, the rest is still very much needed.

v2: Move the version check+comment into parse_generic_dtd() (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-2-ville.syrjala@linux.intel.com

drm/i915: Use drm_mode_init() for on-stack modes

Initialize on-stack modes with drm_mode_init() to guarantee
no stack garbage in the list head, or that we aren't copying
over another mode's list head.

Based on the following cocci script, with manual fixups:
@decl@
identifier M;
expression E;
@@
- struct drm_display_mode M = E;
+ struct drm_display_mode M;

@@
identifier decl.M;
expression decl.E;
statement S, S1;
@@
struct drm_display_mode M;
... when != S
+ drm_mode_init(&M, &E);
+
S1

@@
expression decl.E;
@@
- &*E
+ E

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-19-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: warn about missing ->get_buf_trans initialization

Make sure each DDI platform has sane ->get_buf_trans initialized.

Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503082134.4128355-1-jani.nikula@intel.com

drm/i915: move tons of power well initializers to rodata

Using compound literals for initialization can be tricky. Lacking a
const qualifier, they won't end up in rodata, which is probably not
expected or intended. Add const to move a whopping 136 initializers to
rodata.

Compare:

$ objdump --syms drivers/gpu/drm/i915/display/intel_display_power_map.o | grep "\.rodata.*__compound_literal"
$ objdump --syms drivers/gpu/drm/i915/display/intel_display_power_map.o | grep "\.data.*__compound_literal"

Before and after the change.

Fixes: c32ffce42aa5 ("drm/i915: Convert the power well descriptor domain mask to an array of domains")
Fixes: 4a845ff0c0d4 ("drm/i915: Simplify power well definitions by adding power well instances")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429142140.2671828-1-jani.nikula@intel.com

Merge tag 'gvt-next-2022-04-29' of https://github.com/intel/gvt-linux into drm-intel-next

gvt-next-2022-04-29

Introduce fixes from previous pull.
- Fix a compiling warning of non-static funtion only having one caller.
- Fix a potential NULL pointer reference in the code re-factor.
- Fix a compiling error when CONFIG_DRM_I915_DEBUG_RUNTIME_PM=n

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: "Wang, Zhi A" <zhi.a.wang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9c2fc678-2e6e-a9d5-a540-2a6bfda31196@intel.com

i915/gvt: Fix NULL pointer dereference in init_mmio_block_handlers

Fix following coccicheck error:
./drivers/gpu/drm/i915/gvt/handlers.c:2925:35-41: ERROR: block is NULL but dereferenced.

Use gvt->mmio.mmio_block instead of block to avoid NULL pointer
dereference when find_mmio_block returns NULL.

Fixes: e0f74ed4634d ("i915/gvt: Separate the MMIO tracking table from GVT-g")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220427115457.836729-1-wanjiabing@vivo.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Fix the compiling error when CONFIG_DRM_I915_DEBUG_RUNTIME_PM=n

A compiling error was reported when CONFIG_DRM_I915_DEBUG_RUNTIME_PM=n.
Fix the problem by using the pre-defined macro.

Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220427212849.18109-2-zhi.a.wang@intel.com
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>

drm/i915/gvt: Make intel_gvt_match_device() static

After the refactor of GVT-g, the reference of intel_gvt_match_device()
only happens in handlers.c. Make it static to let the compiler be
happy.

Fixes: e0f74ed4634d ("i915/gvt: Separate the MMIO tracking table from GVT-g")
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Robert Beckett <bob.beckett@collabora.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220427212849.18109-1-zhi.a.wang@intel.com
Reviewed-by: Cc: Jani Nikula <jani.nikula@linux.intel.com>

drm/i915: Add first set of DG2 PCI IDs

The IDs added here are the subset reserved for 'motherboard down'
designs of DG2.  We have all the necessary support upstream to enable
these now (although they'll continue to require force_probe until the
usual requirements are met).

The remaining DG2 IDs for add-in cards will come in a future patch once
some additional required functionality has fully landed.

Bspec: 44477
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425211251.77154-3-matthew.d.roper@intel.com