Laurent Pinchart [Sat, 1 Jan 2022 23:26:37 +0000 (00:26 +0100)]
media: i2c: max9286: Print power-up GMSL link configuration
The power-up GMSL link configuration is controlled by the HIM and BWS
pins, whose state is reflected in register 0x1c. Print the detected
power-up config in a debug message to help debugging.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Sat, 1 Jan 2022 18:28:06 +0000 (19:28 +0100)]
media: i2c: max9286: Select HS as data enable signal
GMSL can transport three synchronization signals: VSync, HSync and Data
Enable. The MAX9286 can select either HS or DE as a line valid signal.
Not all serializers (and transmission formats) support the DE signal.
The MAX9271, used by the RDACM20 and RDACM21 cameras, doesn't document
DE support. Nonetheless, the max9286 driver selects the DE signal as
line valid in register 0x0c (by not setting the DESEL bit). It's not
clear why this works. As HS is a more common line valid qualifier, set
the DESEL bit by default. This is needed to support the onsemi MARS
cameras.
If a camera requires usage of the DE signal in the future, this will
need to be made configurable.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org> # On Eagle V3M with RDACM20
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Sat, 1 Jan 2022 18:28:05 +0000 (19:28 +0100)]
media: i2c: max9286: Configure bus width from device tree
The GMSL serial data bus width is normally selected through the BWS pin.
On some systems, the pin may not be wired to the correct value. Support
overriding the bus width by software, using the value specified in the
device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Sat, 1 Jan 2022 18:28:04 +0000 (19:28 +0100)]
media: i2c: max9286: Configure remote I2C speed from device tree
Read the maxim,i2c-clock-frequency DT property that specifies the speed
of the remote I2C bus, and configure the MAX9286 accordingly. The remote
serializers must all have a matching configuration.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Sat, 1 Jan 2022 18:28:03 +0000 (19:28 +0100)]
media: i2c: max9286: Define macros for all bits of register 0x15
Macros are easier to read than numerical values.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Sat, 1 Jan 2022 18:28:02 +0000 (19:28 +0100)]
media: i2c: max9286: Support 12-bit raw bayer formats
Add support for 12-bit raw bayer formats to the driver, configuring the
GMSL format accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Sat, 1 Jan 2022 18:28:01 +0000 (19:28 +0100)]
media: i2c: max9286: Rename MAX9286_DATATYPE_RAW11 to RAW12
The MAX9286_DATATYPE_RAW11 value is used to configure the MAX9286 for
11-bit or 12-bit input data. While 11-bit data is supported on the GMSL
side, CSI-2 doesn't have a RAW11 format. 11-bit data is transferred over
CSI-2 as RAW12. Rename the macro accordingly to avoid confusion.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Sat, 1 Jan 2022 18:28:00 +0000 (19:28 +0100)]
media: i2c: max9286: Support manual framesync operation
The MAX9286 can generate a framesync signal to synchronize the cameras,
using an internal timer. Support this mode of operation and configure it
through the .s_frameinterval() operation. If the frame interval is not
0, framesync is switched to manual mode with the specified interval,
otherwise automatic mode is used.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Thomas Nizan [Sat, 1 Jan 2022 18:27:59 +0000 (19:27 +0100)]
media: i2c: max9286: Add support for port regulators
Allow users to use one PoC regulator per port, instead of a global
regulator.
The properties '^port[0-3]-poc-supply$' in the DT node are used to
indicate the regulators for individual ports.
Signed-off-by: Thomas Nizan <tnizan@witekio.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 10 Jan 2022 21:24:46 +0000 (22:24 +0100)]
media: dt-bindings: media: i2c: max9286: Add property to select bus width
The GMSL serial data bus width is normally selected by the BWS pin, but
it can also be configured by software. Add a DT property that allows
overriding the value of the BWS-selected bus width to support systems
whose BWS pin doesn't result in the correct value.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Sat, 1 Jan 2022 18:27:57 +0000 (19:27 +0100)]
media: dt-bindings: media: i2c: max9286: Add property to select I2C speed
The I2C speed on the remote side (the I2C master bus of the connected
serializers) is configurable, and doesn't need to match the speed of the
local bus (the slave bus of the MAX9286). All remote buses must use the
same speed, and the MAX9286 needs to be programmed accordingly. Add a
new DT property to select the speed to make it configurable.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Sat, 1 Jan 2022 18:27:56 +0000 (19:27 +0100)]
media: dt-bindings: media: i2c: max9286: Add support for per-port supplies
Power supplies for the ports can be controlled per port depending on the
hardware design. Support per-port supplies in the DT bindings, mutually
exclusive with the global supply.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Mauro Carvalho Chehab [Sun, 22 Jan 2023 07:43:05 +0000 (08:43 +0100)]
Merge tag 'media-uvc-next-
20230115' of git://git./linux/kernel/git/pinchartl/linux into media_stage
uvcvideo fixes and improvements
* tag 'media-uvc-next-
20230115' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux: (27 commits)
media: uvcvideo: Silence memcpy() run-time false positive warnings
media: uvcvideo: Quirk for autosuspend in Logitech B910 and C910
media: uvcvideo: Fix race condition with usb_kill_urb
media: uvcvideo: Use standard names for menus
media: uvcvideo: Fix power line control for Lenovo Integrated Camera
media: uvcvideo: Refactor power_line_frequency_controls_limited
media: uvcvideo: Refactor uvc_ctrl_mappings_uvcXX
media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU
media: uvcvideo: Extend documentation of uvc_video_clock_decode()
media: uvcvideo: Limit power line control for Acer EasyCamera
media: uvcvideo: Refactor __uvc_ctrl_add_mapping
media: uvcvideo: Fix handling on Bitmask controls
media: uvcvideo: Do not return positive errors in uvc_query_ctrl()
media: uvcvideo: Return -EACCES for Wrong state error
media: uvcvideo: Improve error logging in uvc_query_ctrl()
media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()
media: uvcvideo: Factor out usb_string() calls
media: uvcvideo: Limit power line control for Acer EasyCamera
media: uvcvideo: Recover stalled ElGato devices
media: uvcvideo: Remove void casting for the status endpoint
...
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Tue, 13 Dec 2022 15:35:52 +0000 (16:35 +0100)]
media: rc/ir-rx51: Drop empty platform remove function
A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jean Delvare [Mon, 21 Nov 2022 16:09:11 +0000 (17:09 +0100)]
media: rc: Drop obsolete dependencies on COMPILE_TEST
Since commit
0166dc11be91 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
As a minor optimization, this also lets us drop of_match_ptr(), as we
now know what it will resolve to, we might as well save cpp some work.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:42:21 +0000 (23:42 +0100)]
media: tuners/si2157: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:42:04 +0000 (23:42 +0100)]
media: i2c/video-i2c: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:41:56 +0000 (23:41 +0100)]
media: i2c/tvp514x: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
[hverkuil: remove obsolete kerneldoc 'id' documentation]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:41:55 +0000 (23:41 +0100)]
media: i2c/tvaudio: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:41:48 +0000 (23:41 +0100)]
media: i2c/tda1997x: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:41:43 +0000 (23:41 +0100)]
media: i2c/saa7127: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:41:42 +0000 (23:41 +0100)]
media: i2c/saa7115: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:41:34 +0000 (23:41 +0100)]
media: i2c/ov7670: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:41:29 +0000 (23:41 +0100)]
media: i2c/mt9v032: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:41:25 +0000 (23:41 +0100)]
media: i2c/mt9p031: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:41:23 +0000 (23:41 +0100)]
media: i2c/msp3400-driver: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:41:16 +0000 (23:41 +0100)]
media: i2c/ir-kbd-i2c: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:41:14 +0000 (23:41 +0100)]
media: i2c/cs53l32a: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:41:06 +0000 (23:41 +0100)]
media: i2c/adv7604: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:41:02 +0000 (23:41 +0100)]
media: i2c/adv7180: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:40:54 +0000 (23:40 +0100)]
media: dvb-frontends/tc90522: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:40:43 +0000 (23:40 +0100)]
media: dvb-frontends/mn88443x: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:40:42 +0000 (23:40 +0100)]
media: dvb-frontends/m88ds3103: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:40:38 +0000 (23:40 +0100)]
media: dvb-frontends/dvb-pll: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Kees Cook [Fri, 6 Jan 2023 06:17:04 +0000 (22:17 -0800)]
media: uvcvideo: Silence memcpy() run-time false positive warnings
The memcpy() in uvc_video_decode_meta() intentionally copies across the
length and flags members and into the trailing buf flexible array.
Split the copy so that the compiler can better reason about (the lack
of) buffer overflows here. Avoid the run-time false positive warning:
memcpy: detected field-spanning write (size 12) of single field "&meta->length" at drivers/media/usb/uvc/uvc_video.c:1355 (size 1)
Additionally fix a typo in the documentation for struct uvc_meta_buf.
Reported-by: ionut_n2001@yahoo.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216810
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Ricardo Ribalda [Wed, 4 Jan 2023 10:45:23 +0000 (11:45 +0100)]
media: uvcvideo: Quirk for autosuspend in Logitech B910 and C910
Logitech B910 and C910 firmware are unable to recover from a USB
autosuspend. When it resumes, the device is in a state where it only
produces invalid frames. Eg:
$ echo 0xFFFF > /sys/module/uvcvideo/parameters/trace # enable verbose log
$ yavta -c1 -n1 --file='frame#.jpg' --format MJPEG --size=1920x1080 /dev/video1
[350438.435219] uvcvideo: uvc_v4l2_open
[350438.529794] uvcvideo: Resuming interface 2
[350438.529801] uvcvideo: Resuming interface 3
[350438.529991] uvcvideo: Trying format 0x47504a4d (MJPG): 1920x1080.
[350438.529996] uvcvideo: Using default frame interval 33333.3 us (30.0 fps).
[350438.551496] uvcvideo: uvc_v4l2_mmap
[350438.555890] uvcvideo: Device requested 3060 B/frame bandwidth.
[350438.555896] uvcvideo: Selecting alternate setting 11 (3060 B/frame bandwidth).
[350438.556362] uvcvideo: Allocated 5 URB buffers of 32x3060 bytes each.
[350439.316468] uvcvideo: Marking buffer as bad (error bit set).
[350439.316475] uvcvideo: Frame complete (EOF found).
[350439.316477] uvcvideo: EOF in empty payload.
[350439.316484] uvcvideo: frame 1 stats: 149/261/417 packets, 1/149/417 pts (early initial), 416/417 scr, last pts/stc/sof
2976325734/
2978107243/249
[350439.384510] uvcvideo: Marking buffer as bad (error bit set).
[350439.384516] uvcvideo: Frame complete (EOF found).
[350439.384518] uvcvideo: EOF in empty payload.
[350439.384525] uvcvideo: frame 2 stats: 265/379/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof
2979524454/
2981305193/316
[350439.448472] uvcvideo: Marking buffer as bad (error bit set).
[350439.448478] uvcvideo: Frame complete (EOF found).
[350439.448480] uvcvideo: EOF in empty payload.
[350439.448487] uvcvideo: frame 3 stats: 265/377/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof
2982723174/
2984503144/382
...(loop)...
The devices can leave this invalid state if the alternate setting of
the streaming interface is toggled.
This patch adds a quirk for this device so it can be autosuspended
properly.
lsusb -v:
Bus 001 Device 049: ID 046d:0821 Logitech, Inc. HD Webcam C910
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x046d Logitech, Inc.
idProduct 0x0821 HD Webcam C910
bcdDevice 0.10
iManufacturer 0
iProduct 0
iSerial 1
390022B0
bNumConfigurations 1
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Ricardo Ribalda [Thu, 5 Jan 2023 14:31:29 +0000 (15:31 +0100)]
media: uvcvideo: Fix race condition with usb_kill_urb
usb_kill_urb warranties that all the handlers are finished when it
returns, but does not protect against threads that might be handling
asynchronously the urb.
For UVC, the function uvc_ctrl_status_event_async() takes care of
control changes asynchronously.
If the code is executed in the following order:
CPU 0 CPU 1
===== =====
uvc_status_complete()
uvc_status_stop()
uvc_ctrl_status_event_work()
uvc_status_start() -> FAIL
Then uvc_status_start will keep failing and this error will be shown:
<4>[ 5.540139] URB
0000000000000000 submitted while active
drivers/usb/core/urb.c:378 usb_submit_urb+0x4c3/0x528
Let's improve the current situation, by not re-submiting the urb if
we are stopping the status event. Also process the queued work
(if any) during stop.
CPU 0 CPU 1
===== =====
uvc_status_complete()
uvc_status_stop()
uvc_status_start()
uvc_ctrl_status_event_work() -> FAIL
Hopefully, with the usb layer protection this should be enough to cover
all the cases.
Cc: stable@vger.kernel.org
Fixes:
e5225c820c05 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives")
Reviewed-by: Yunke Cao <yunkec@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Ricardo Ribalda [Thu, 5 Jan 2023 13:52:58 +0000 (14:52 +0100)]
media: uvcvideo: Use standard names for menus
Instead of duplicating the menu info, use the one from the core.
Also, do not use extra memory for 1:1 mappings.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Ricardo Ribalda [Thu, 5 Jan 2023 13:52:57 +0000 (14:52 +0100)]
media: uvcvideo: Fix power line control for Lenovo Integrated Camera
The device does not implement the power line frequenyc control
correctly. It is a UVC 1.5 device, but implements the control as a UVC
1.1 device.
Add the corresponding control mapping override.
Bus 003 Device 002: ID 30c9:0093 Lenovo Integrated Camera
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.01
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x30c9
idProduct 0x0093
bcdDevice 0.07
iManufacturer 3 Lenovo
iProduct 1 Integrated Camera
iSerial 2 8SSC21J75356V1SR2830069
bNumConfigurations 1
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Ricardo Ribalda [Thu, 5 Jan 2023 13:52:56 +0000 (14:52 +0100)]
media: uvcvideo: Refactor power_line_frequency_controls_limited
Move the control mapping to uvc_ctrl.c. This way we do not have
references to UVC controls or V4L2 controls in uvc_driver.c.
This also fixes a bug introduced in commit
382075604a68 ("media:
uvcvideo: Limit power line control for Quanta UVC Webcam"). The
offending commit caused the power line control menu entries to have
incorrect indices compared to the V4L2_CID_POWER_LINE_FREQUENCY_*
enumeration. Now that the limited mapping reuses the correct menu_info
array, the indices correctly map to the V4L2 control specification.
Fixes:
382075604a68 ("media: uvcvideo: Limit power line control for Quanta UVC Webcam")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Ricardo Ribalda [Thu, 5 Jan 2023 13:52:55 +0000 (14:52 +0100)]
media: uvcvideo: Refactor uvc_ctrl_mappings_uvcXX
Convert the array of structs into an array of pointers, that way the
mappings can be reused.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Ricardo Ribalda [Thu, 5 Jan 2023 13:52:54 +0000 (14:52 +0100)]
media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU
Replace the count with a mask field that lets us choose not only the max
value, but also the minimum value and what values are valid in between.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Ricardo Ribalda [Wed, 4 Jan 2023 10:45:19 +0000 (11:45 +0100)]
media: uvcvideo: Extend documentation of uvc_video_clock_decode()
Make an explicit reference to UVC 1.5, explaining how the algorithm
supports the different behaviour of UVC 1.1 and 1.5.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: HungNien Chen <hn.chen@sunplusit.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Ricardo Ribalda [Tue, 3 Jan 2023 11:01:21 +0000 (12:01 +0100)]
media: uvcvideo: Limit power line control for Acer EasyCamera
The device does not implement the power line control correctly. Add a
corresponding control mapping override.
Bus 003 Device 002: ID 5986:1180 Acer, Inc EasyCamera
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x5986 Acer, Inc
idProduct 0x1180
bcdDevice 56.04
iManufacturer 3 Bison
iProduct 1 EasyCamera
iSerial 2
bNumConfigurations 1
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Ricardo Ribalda [Tue, 3 Jan 2023 14:36:25 +0000 (15:36 +0100)]
media: uvcvideo: Refactor __uvc_ctrl_add_mapping
Simplify the exit code with a common error tag freeing all the memory.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Ricardo Ribalda [Tue, 3 Jan 2023 14:36:23 +0000 (15:36 +0100)]
media: uvcvideo: Fix handling on Bitmask controls
Minimum and step values for V4L2_CTRL_TYPE_BITMASK controls should be 0.
There is no need to query the camera firmware about this and maybe get
invalid results.
Also value should be masked to the max value advertised by the
hardware.
Finally, handle UVC 1.5 mask controls that use MAX instead of RES to
describe the valid bits.
Fixes v4l2-compliane:
Control ioctls (Input 0):
fail: v4l2-test-controls.cpp(97): minimum must be 0 for a bitmask control
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: FAIL
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Ricardo Ribalda [Tue, 3 Jan 2023 14:36:22 +0000 (15:36 +0100)]
media: uvcvideo: Do not return positive errors in uvc_query_ctrl()
If the returned size of the query does not match the expected size or it
is zero, return -EPIPE instead of 0 or a positive value.
This will avoid confusing the caller (and ultimately userspace) that
doesn't expect a positive or zero value.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Ricardo Ribalda [Tue, 3 Jan 2023 14:36:21 +0000 (15:36 +0100)]
media: uvcvideo: Return -EACCES for Wrong state error
Error 2 is defined by UVC as:
Wrong State: The device is in a state that disallows the specific
request. The device will remain in this state until a specific action
from the host or the user is completed.
This is documented as happening when attempting to set the value of a
manual control when the device is in auto mode. While V4L2 allows this,
the closest error code defined by VIDIOC_S_CTRL is EACCES:
EACCES: Attempt to set a read-only control or to get a write-only
control. Or if there is an attempt to set an inactive control and the
driver is not capable of caching the new value until the control is
active again.
Replace EILSEQ with EACCES.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Hans Verkuil [Tue, 3 Jan 2023 14:36:20 +0000 (15:36 +0100)]
media: uvcvideo: Improve error logging in uvc_query_ctrl()
Standard use of the driver may result in error messages on the kernel
log. This can hide other more important messages, and alert
unnecessarily the user. Let's keep dev_err() for the important
occasions.
If __uvc_query_ctrl() failed with a non -EPIPE error, then report that
with dev_err. If an error code is obtained, then report that with
dev_dbg.
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Hans Verkuil [Tue, 3 Jan 2023 14:36:19 +0000 (15:36 +0100)]
media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()
Check for inactive controls in uvc_ctrl_is_accessible().
Use the new value for the master_id controls if present, otherwise
use the existing value to determine if it is OK to set the control.
Doing this here avoids attempting to set an inactive control, which
will return an error from the USB device, which returns an invalid
errorcode.
This fixes:
warn: v4l2-test-controls.cpp(483): s_ctrl returned EIO
warn: v4l2-test-controls.cpp(483): s_ctrl returned EIO
test VIDIOC_G/S_CTRL: OK
warn: v4l2-test-controls.cpp(739): s_ext_ctrls returned EIO
warn: v4l2-test-controls.cpp(739): s_ext_ctrls returned EIO
warn: v4l2-test-controls.cpp(816): s_ext_ctrls returned EIO
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
Tested with:
v4l2-ctl -c auto_exposure=1
OK
v4l2-ctl -c exposure_time_absolute=251
OK
v4l2-ctl -c auto_exposure=3
OK
v4l2-ctl -c exposure_time_absolute=251
VIDIOC_S_EXT_CTRLS: failed: Input/output error
exposure_time_absolute: Input/output error
ERROR
v4l2-ctl -c auto_exposure=3,exposure_time_absolute=251,auto_exposure=1
v4l2-ctl -C auto_exposure,exposure_time_absolute
auto_exposure: 1
exposure_time_absolute: 251
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Tue, 25 Oct 2022 18:42:21 +0000 (21:42 +0300)]
media: uvcvideo: Factor out usb_string() calls
When parsing UVC descriptors to instantiate entities, the driver calls
usb_string() to retrieve the entity name from the device, and falls back
to a default name if the string can't be retrieved. This code pattern
occurs multiple times. Factor it out to a separate helper function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Ricardo Ribalda [Fri, 2 Dec 2022 16:45:06 +0000 (17:45 +0100)]
media: uvcvideo: Limit power line control for Acer EasyCamera
The device does not implement the power line control correctly. Add a
corresponding control mapping override.
Bus 003 Device 002: ID 5986:1180 Acer, Inc EasyCamera
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x5986 Acer, Inc
idProduct 0x1180
bcdDevice 56.04
iManufacturer 3 Bison
iProduct 1 EasyCamera
iSerial 2
bNumConfigurations 1
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Ricardo Ribalda [Mon, 5 Dec 2022 23:15:04 +0000 (00:15 +0100)]
media: uvcvideo: Recover stalled ElGato devices
Elgato Cam Link 4k can be in a stalled state if the resolution of
the external source has changed while the firmware initializes.
Once in this state, the device is useless until it receives a
USB reset. It has even been observed that the stalled state will
continue even after unplugging the device.
lsusb -v
Bus 002 Device 002: ID 0fd9:0066 Elgato Systems GmbH Cam Link 4K
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 9
idVendor 0x0fd9 Elgato Systems GmbH
idProduct 0x0066
bcdDevice 0.00
iManufacturer 1 Elgato
iProduct 2 Cam Link 4K
iSerial 4
0005AC52FE000
bNumConfigurations 1
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Ricardo Ribalda [Tue, 20 Dec 2022 22:56:44 +0000 (23:56 +0100)]
media: uvcvideo: Remove void casting for the status endpoint
Make the code more resilient, by replacing the castings with proper
structure definitions and using offsetof() instead of open coding the
location of the data.
Suggested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Pedro Guilherme Siqueira Moreira [Tue, 25 Oct 2022 05:04:50 +0000 (02:04 -0300)]
media: uvcvideo: Fix usage of symbolic permissions to octal
Change symbolic permissions to octal equivalents as recommended by
scripts/checkpatch.pl on drivers/media/usb/uvc/uvc_driver.c.
Signed-off-by: Pedro Guilherme Siqueira Moreira <pedro.guilherme@espectro.eng.br>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Pedro Guilherme Siqueira Moreira [Tue, 25 Oct 2022 05:04:49 +0000 (02:04 -0300)]
media: uvcvideo: Fix assignment inside if condition
Fixes 'do not use assignment in if condition' errors issued by
scripts/checkpatch.pl on drivers/media/usb/uvc/uvc_driver.c
Signed-off-by: Pedro Guilherme Siqueira Moreira <pedro.guilherme@espectro.eng.br>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Pedro Guilherme Siqueira Moreira [Tue, 25 Oct 2022 05:04:48 +0000 (02:04 -0300)]
media: uvcvideo: Fix missing newline after declarations
Fixes 'Missing a blank line after declarations' warning issued by
scripts/checkpatch.pl on drivers/media/usb/uvc/uvc_driver.c
Signed-off-by: Pedro Guilherme Siqueira Moreira <pedro.guilherme@espectro.eng.br>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Guenter Roeck [Tue, 25 Oct 2022 14:41:01 +0000 (16:41 +0200)]
media: uvcvideo: Handle errors from calls to usb_string
On a Webcam from Quanta, we see the following error.
usb 3-5: New USB device found, idVendor=0408, idProduct=30d2, bcdDevice= 0.03
usb 3-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 3-5: Product: USB2.0 HD UVC WebCam
usb 3-5: Manufacturer: Quanta
usb 3-5: SerialNumber: 0x0001
...
uvcvideo: Found UVC 1.10 device USB2.0 HD UVC WebCam (0408:30d2)
uvcvideo: Failed to initialize entity for entity 5
uvcvideo: Failed to register entities (-22).
The Webcam reports an entity of type UVC_VC_EXTENSION_UNIT. It reports a
string index of '7' associated with that entity. The attempt to read that
string from the camera fails with error -32 (-EPIPE). usb_string() returns
that error, but it is ignored. As result, the entity name is empty. This
later causes v4l2_device_register_subdev() to return -EINVAL, and no
entities are registered as result.
While this appears to be a firmware problem with the camera, the kernel
should still handle the situation gracefully. To do that, check the return
value from usb_string(). If it reports an error, assign the entity's
default name.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Ricardo Ribalda [Tue, 20 Sep 2022 14:09:50 +0000 (16:09 +0200)]
media: uvcvideo: Only create input devs if hw supports it
Examine the stream headers to figure out if the device has a button and
can be used as an input.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Ricardo Ribalda [Tue, 20 Sep 2022 14:04:55 +0000 (16:04 +0200)]
media: uvcvideo: Handle cameras with invalid descriptors
If the source entity does not contain any pads, do not create a link.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Tue, 15 Nov 2016 16:44:29 +0000 (18:44 +0200)]
media: uvcvideo: Remove format descriptions
The V4L2 core overwrites format descriptions in v4l_fill_fmtdesc(),
there's no need to manually set the descriptions in the driver. This
prepares for removal of the format descriptions from the uvc_fmts table.
Unlike V4L2, UVC makes a distinction between the SD-DV, SDL-DV and HD-DV
formats. It also indicates whether the DV format uses 50Hz or 60Hz. This
information is parsed by the driver to construct a format name string
that is printed in a debug message, but serves no other purpose as V4L2
has a single V4L2_PIX_FMT_DV pixel format that covers all those cases.
As the information is available in the UVC descriptors, and thus
accessible to users with lsusb if they really care, don't log it in a
debug message and drop the format name string to simplify the code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Mauro Carvalho Chehab [Wed, 28 Dec 2022 16:07:44 +0000 (16:07 +0000)]
Merge tag 'v6.2-rc1' into media_tree
Linux 6.2-rc1
* tag 'v6.2-rc1': (14398 commits)
Linux 6.2-rc1
treewide: Convert del_timer*() to timer_shutdown*()
pstore: Properly assign mem_type property
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
cfi: Fix CFI failure with KASAN
perf python: Fix splitting CC into compiler and options
afs: Stop implementing ->writepage()
afs: remove afs_cache_netfs and afs_zap_permits() declarations
afs: remove variable nr_servers
afs: Fix lost servers_outstanding count
ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless
ALSA: azt3328: Remove the unused function snd_azf3328_codec_outl()
gcov: add support for checksum field
test_maple_tree: add test for mas_spanning_rebalance() on insufficient data
maple_tree: fix mas_spanning_rebalance() on insufficient data
hugetlb: really allocate vma lock for all sharable vmas
kmsan: export kmsan_handle_urb
kmsan: include linux/vmalloc.h
mm/mempolicy: fix memory leak in set_mempolicy_home_node system call
mm, mremap: fix mremap() expanding vma with addr inside vma
...
Linus Torvalds [Sun, 25 Dec 2022 21:41:39 +0000 (13:41 -0800)]
Linux 6.2-rc1
Steven Rostedt (Google) [Tue, 20 Dec 2022 18:45:19 +0000 (13:45 -0500)]
treewide: Convert del_timer*() to timer_shutdown*()
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
$ cat timer.cocci
@@
expression ptr, slab;
identifier timer, rfield;
@@
(
- del_timer(&ptr->timer);
+ timer_shutdown(&ptr->timer);
|
- del_timer_sync(&ptr->timer);
+ timer_shutdown_sync(&ptr->timer);
)
... when strict
when != ptr->timer
(
kfree_rcu(ptr, rfield);
|
kmem_cache_free(slab, ptr);
|
kfree(ptr);
)
$ spatch timer.cocci . > /tmp/t.patch
$ patch -p1 < /tmp/t.patch
Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 23 Dec 2022 22:44:08 +0000 (14:44 -0800)]
Merge tag 'spi-fix-v6.2-rc1' of git://git./linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One driver specific change here which handles the case where a SPI
device for some reason tries to change the bus speed during a message
on fsl_spi hardware, this should be very unusual"
* tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fsl_spi: Don't change speed while chipselect is active
Linus Torvalds [Fri, 23 Dec 2022 22:38:00 +0000 (14:38 -0800)]
Merge tag 'regulator-fix-v6.2-rc1' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Two core fixes here, one for a long standing race which some Qualcomm
systems have started triggering with their UFS driver and another
fixing a problem with supply lookup introduced by the fixes for devm
related use after free issues that were introduced in this merge
window"
* tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: fix deadlock on regulator enable
regulator: core: Fix resolve supply lookup issue
Linus Torvalds [Fri, 23 Dec 2022 21:56:41 +0000 (13:56 -0800)]
Merge tag 'coccinelle-6.2' of git://git./linux/kernel/git/jlawall/linux
Pull coccicheck update from Julia Lawall:
"Modernize use of grep in coccicheck:
Use 'grep -E' instead of 'egrep'"
* tag 'coccinelle-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
scripts: coccicheck: use "grep -E" instead of "egrep"
Linus Torvalds [Fri, 23 Dec 2022 20:00:24 +0000 (12:00 -0800)]
Merge tag 'hardening-v6.2-rc1-fixes' of git://git./linux/kernel/git/kees/linux
Pull kernel hardening fixes from Kees Cook:
- Fix CFI failure with KASAN (Sami Tolvanen)
- Fix LKDTM + CFI under GCC 7 and 8 (Kristina Martsenko)
- Limit CONFIG_ZERO_CALL_USED_REGS to Clang > 15.0.6 (Nathan
Chancellor)
- Ignore "contents" argument in LoadPin's LSM hook handling
- Fix paste-o in /sys/kernel/warn_count API docs
- Use READ_ONCE() consistently for oops/warn limit reading
* tag 'hardening-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
cfi: Fix CFI failure with KASAN
exit: Use READ_ONCE() for all oops/warn limit reads
security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6
lkdtm: cfi: Make PAC test work with GCC 7 and 8
docs: Fix path paste-o for /sys/kernel/warn_count
LoadPin: Ignore the "contents" argument of the LSM hooks
Linus Torvalds [Fri, 23 Dec 2022 19:55:54 +0000 (11:55 -0800)]
Merge tag 'pstore-v6.2-rc1-fixes' of git://git./linux/kernel/git/kees/linux
Pull pstore fixes from Kees Cook:
- Switch pmsg_lock to an rt_mutex to avoid priority inversion (John
Stultz)
- Correctly assign mem_type property (Luca Stefani)
* tag 'pstore-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore: Properly assign mem_type property
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion
Linus Torvalds [Fri, 23 Dec 2022 19:44:20 +0000 (11:44 -0800)]
Merge tag 'dma-mapping-2022-12-23' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Fix up the sound code to not pass __GFP_COMP to the non-coherent DMA
allocator, as it copes with that just as badly as the coherent
allocator, and then add a check to make sure no one passes the flag
ever again"
* tag 'dma-mapping-2022-12-23' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reject GFP_COMP for noncoherent allocations
ALSA: memalloc: don't use GFP_COMP for non-coherent dma allocations
Linus Torvalds [Fri, 23 Dec 2022 19:39:18 +0000 (11:39 -0800)]
Merge tag '9p-for-6.2-rc1' of https://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
- improve p9_check_errors to check buffer size instead of msize when
possible (e.g. not zero-copy)
- some more syzbot and KCSAN fixes
- minor headers include cleanup
* tag '9p-for-6.2-rc1' of https://github.com/martinetd/linux:
9p/client: fix data race on req->status
net/9p: fix response size check in p9_check_errors()
net/9p: distinguish zero-copy requests
9p/xen: do not memcpy header into req->rc
9p: set req refcount to zero to avoid uninitialized usage
9p/net: Remove unneeded idr.h #include
9p/fs: Remove unneeded idr.h #include
Linus Torvalds [Fri, 23 Dec 2022 19:15:48 +0000 (11:15 -0800)]
Merge tag 'sound-6.2-rc1-2' of git://git./linux/kernel/git/tiwai/sound
Pull more sound updates from Takashi Iwai:
"A few more updates for 6.2: most of changes are about ASoC
device-specific fixes.
- Lots of ASoC Intel AVS extensions and refactoring
- Quirks for ASoC Intel SOF as well as regression fixes
- ASoC Mediatek and Rockchip fixes
- Intel HD-audio HDMI workarounds
- Usual HD- and USB-audio device-specific quirks"
* tag 'sound-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (54 commits)
ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless
ALSA: azt3328: Remove the unused function snd_azf3328_codec_outl()
ASoC: lochnagar: Fix unused lochnagar_of_match warning
ASoC: Intel: Add HP Stream 8 to bytcr_rt5640.c
ASoC: SOF: mediatek: initialize panic_info to zero
ASoC: rt5670: Remove unbalanced pm_runtime_put()
ASoC: Intel: bytcr_rt5640: Add quirk for the Advantech MICA-071 tablet
ASoC: Intel: soc-acpi: update codec addr on 0C11/0C4F product
ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume()
ASoC: wm8994: Fix potential deadlock
ASoC: mediatek: mt8195: add sof be ops to check audio active
ASoC: SOF: Revert: "core: unregister clients and machine drivers in .shutdown"
ASoC: SOF: Intel: pci-tgl: unblock S5 entry if DMA stop has failed"
ALSA: hda/hdmi: fix stream-id config keep-alive for rt suspend
ALSA: hda/hdmi: set default audio parameters for KAE silent-stream
ALSA: hda/hdmi: fix i915 silent stream programming flow
ALSA: hda: Error out if invalid stream is being setup
ASoC: dt-bindings: fsl-sai: Reinstate i.MX93 SAI compatible string
ASoC: soc-pcm.c: Clear DAIs parameters after stream_active is updated
ASoC: codecs: wcd-clsh: Remove the unused function
...
Linus Torvalds [Fri, 23 Dec 2022 19:09:44 +0000 (11:09 -0800)]
Merge tag 'drm-next-2022-12-23' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Holiday fixes!
Two batches from amd, and one group of i915 changes.
amdgpu:
- Spelling fix
- BO pin fix
- Properly handle polaris 10/11 overlap asics
- GMC9 fix
- SR-IOV suspend fix
- DCN 3.1.4 fix
- KFD userptr locking fix
- SMU13.x fixes
- GDS/GWS/OA handling fix
- Reserved VMID handling fixes
- FRU EEPROM fix
- BO validation fixes
- Avoid large variable on the stack
- S0ix fixes
- SMU 13.x fixes
- VCN fix
- Add missing fence reference
amdkfd:
- Fix init vm error handling
- Fix double release of compute pasid
i915
- Documentation fixes
- OA-perf related fix
- VLV/CHV HDMI/DP audio fix
- Display DDI/Transcoder fix
- Migrate fixes"
* tag 'drm-next-2022-12-23' of git://anongit.freedesktop.org/drm/drm: (39 commits)
drm/amdgpu: grab extra fence reference for drm_sched_job_add_dependency
drm/amdgpu: enable VCN DPG for GC IP v11.0.4
drm/amdgpu: skip mes self test after s0i3 resume for MES IP v11.0
drm/amd/pm: correct the fan speed retrieving in PWM for some SMU13 asics
drm/amd/pm: bump SMU13.0.0 driver_if header to version 0x34
drm/amdgpu: skip MES for S0ix as well since it's part of GFX
drm/amd/pm: avoid large variable on kernel stack
drm/amdkfd: Fix double release compute pasid
drm/amdkfd: Fix kfd_process_device_init_vm error handling
drm/amd/pm: update SMU13.0.0 reported maximum shader clock
drm/amd/pm: correct SMU13.0.0 pstate profiling clock settings
drm/amd/pm: enable GPO dynamic control support for SMU13.0.7
drm/amd/pm: enable GPO dynamic control support for SMU13.0.0
drm/amdgpu: revert "generally allow over-commit during BO allocation"
drm/amdgpu: Remove unnecessary domain argument
drm/amdgpu: Fix size validation for non-exclusive domains (v4)
drm/amdgpu: Check if fru_addr is not NULL (v2)
drm/i915/ttm: consider CCS for backup objects
drm/i915/migrate: fix corner case in CCS aux copying
drm/amdgpu: rework reserved VMID handling
...
Linus Torvalds [Fri, 23 Dec 2022 18:49:45 +0000 (10:49 -0800)]
Merge tag 'mips_6.2_1' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
"Fixes due to DT changes"
* tag 'mips_6.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: dts: bcm63268: Add missing properties to the TWD node
MIPS: ralink: mt7621: avoid to init common ralink reset controller
Linus Torvalds [Fri, 23 Dec 2022 18:45:00 +0000 (10:45 -0800)]
Merge tag 'mm-hotfixes-stable-2022-12-22-14-34' of git://git./linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Eight fixes, all cc:stable. One is for gcov and the remainder are MM"
* tag 'mm-hotfixes-stable-2022-12-22-14-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
gcov: add support for checksum field
test_maple_tree: add test for mas_spanning_rebalance() on insufficient data
maple_tree: fix mas_spanning_rebalance() on insufficient data
hugetlb: really allocate vma lock for all sharable vmas
kmsan: export kmsan_handle_urb
kmsan: include linux/vmalloc.h
mm/mempolicy: fix memory leak in set_mempolicy_home_node system call
mm, mremap: fix mremap() expanding vma with addr inside vma
Luca Stefani [Thu, 22 Dec 2022 13:10:49 +0000 (14:10 +0100)]
pstore: Properly assign mem_type property
If mem-type is specified in the device tree
it would end up overriding the record_size
field instead of populating mem_type.
As record_size is currently parsed after the
improper assignment with default size 0 it
continued to work as expected regardless of the
value found in the device tree.
Simply changing the target field of the struct
is enough to get mem-type working as expected.
Fixes:
9d843e8fafc7 ("pstore: Add mem_type property DT parsing support")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Stefani <luca@osomprivacy.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221222131049.286288-1-luca@osomprivacy.com
John Stultz [Wed, 21 Dec 2022 05:18:55 +0000 (05:18 +0000)]
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
In commit
76d62f24db07 ("pstore: Switch pmsg_lock to an rt_mutex
to avoid priority inversion") I changed a lock to an rt_mutex.
However, its possible that CONFIG_RT_MUTEXES is not enabled,
which then results in a build failure, as the 0day bot detected:
https://lore.kernel.org/linux-mm/
202212211244.TwzWZD3H-lkp@intel.com/
Thus this patch changes CONFIG_PSTORE_PMSG to select
CONFIG_RT_MUTEXES, which ensures the build will not fail.
Cc: Wei Wang <wvw@google.com>
Cc: Midas Chien<midaschieh@google.com>
Cc: Connor O'Brien <connoro@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: kernel test robot <lkp@intel.com>
Cc: kernel-team@android.com
Fixes:
76d62f24db07 ("pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221221051855.15761-1-jstultz@google.com
Sami Tolvanen [Thu, 22 Dec 2022 22:57:47 +0000 (22:57 +0000)]
cfi: Fix CFI failure with KASAN
When CFI_CLANG and KASAN are both enabled, LLVM doesn't generate a
CFI type hash for asan.module_ctor functions in translation units
where CFI is disabled, which leads to a CFI failure during boot when
do_ctors calls the affected constructors:
CFI failure at do_basic_setup+0x64/0x90 (target:
asan.module_ctor+0x0/0x28; expected type: 0xa540670c)
Specifically, this happens because CFI is disabled for
kernel/cfi.c. There's no reason to keep CFI disabled here anymore, so
fix the failure by not filtering out CC_FLAGS_CFI for the file.
Note that https://reviews.llvm.org/rG3b14862f0a96 fixed the issue
where LLVM didn't emit CFI type hashes for any sanitizer constructors,
but now type hashes are emitted correctly for TUs that use CFI.
Link: https://github.com/ClangBuiltLinux/linux/issues/1742
Fixes:
89245600941e ("cfi: Switch to -fsanitize=kcfi")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221222225747.3538676-1-samitolvanen@google.com
Linus Torvalds [Thu, 22 Dec 2022 19:22:31 +0000 (11:22 -0800)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes and small updates.
The only things of note is a qla2xxx fix for crash on hotplug and
timeout and the addition of a user exposed abstraction layer for
persistent reservation error return handling (which necessitates the
conversion of nvme.c as well as SCSI)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix crash when I/O abort times out
nvme: Convert NVMe errors to PR errors
scsi: sd: Convert SCSI errors to PR errors
scsi: core: Rename status_byte to sg_status_byte
block: Add error codes for common PR failures
scsi: sd: sd_zbc: Trace zone append emulation
scsi: libfc: Include the correct header
Linus Torvalds [Thu, 22 Dec 2022 19:17:34 +0000 (11:17 -0800)]
Merge tag 'afs-next-
20221222' of git://git./linux/kernel/git/dhowells/linux-fs
Pull afs update from David Howells:
"A fix for a couple of missing resource counter decrements, two small
cleanups of now-unused bits of code and a patch to remove writepage
support from afs"
* tag 'afs-next-
20221222' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Stop implementing ->writepage()
afs: remove afs_cache_netfs and afs_zap_permits() declarations
afs: remove variable nr_servers
afs: Fix lost servers_outstanding count
Linus Torvalds [Thu, 22 Dec 2022 19:07:29 +0000 (11:07 -0800)]
Merge tag 'perf-tools-for-v6.2-2-2022-12-22' of git://git./linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
"perf tools fixes and improvements:
- Don't stop building perf if python setuptools isn't installed, just
disable the affected perf feature.
- Remove explicit reference to python 2.x devel files, that warning
is about python-devel, no matter what version, being unavailable
and thus disabling the linking with libpython.
- Don't use -Werror=switch-enum when building the python support that
handles libtraceevent enumerations, as there is no good way to test
if some specific enum entry is available with the libtraceevent
installed on the system.
- Introduce 'perf lock contention' --type-filter and --lock-filter,
to filter by lock type and lock name:
$ sudo ./perf lock record -a -- ./perf bench sched messaging
$ sudo ./perf lock contention -E 5 -Y spinlock
contended total wait max wait avg wait type caller
802 1.26 ms 11.73 us 1.58 us spinlock __wake_up_common_lock+0x62
13 787.16 us 105.44 us 60.55 us spinlock remove_wait_queue+0x14
12 612.96 us 78.70 us 51.08 us spinlock prepare_to_wait+0x27
114 340.68 us 12.61 us 2.99 us spinlock try_to_wake_up+0x1f5
83 226.38 us 9.15 us 2.73 us spinlock folio_lruvec_lock_irqsave+0x5e
$ sudo ./perf lock contention -l
contended total wait max wait avg wait address symbol
57 1.11 ms 42.83 us 19.54 us
ffff9f4140059000
15 280.88 us 23.51 us 18.73 us
ffffffff9d007a40 jiffies_lock
1 20.49 us 20.49 us 20.49 us
ffffffff9d0d50c0 rcu_state
1 9.02 us 9.02 us 9.02 us
ffff9f41759e9ba0
$ sudo ./perf lock contention -L jiffies_lock,rcu_state
contended total wait max wait avg wait type caller
15 280.88 us 23.51 us 18.73 us spinlock tick_sched_do_timer+0x93
1 20.49 us 20.49 us 20.49 us spinlock __softirqentry_text_start+0xeb
$ sudo ./perf lock contention -L
ffff9f4140059000
contended total wait max wait avg wait type caller
38 779.40 us 42.83 us 20.51 us spinlock worker_thread+0x50
11 216.30 us 39.87 us 19.66 us spinlock queue_work_on+0x39
8 118.13 us 20.51 us 14.77 us spinlock kthread+0xe5
- Fix splitting CC into compiler and options when checking if a
option is present in clang to build the python binding, needed in
systems such as yocto that set CC to, e.g.: "gcc --sysroot=/a/b/c".
- Refresh metris and events for Intel systems: alderlake.
alderlake-n, bonnell, broadwell, broadwellde, broadwellx,
cascadelakex, elkhartlake, goldmont, goldmontplus, haswell,
haswellx, icelake, icelakex, ivybridge, ivytown, jaketown,
knightslanding, meteorlake, nehalemep, nehalemex, sandybridge,
sapphirerapids, silvermont, skylake, skylakex, snowridgex,
tigerlake, westmereep-dp, westmereep-sp, westmereex.
- Add vendor events files (JSON) for AMD Zen 4, from sections
2.1.15.4 "Core Performance Monitor Counters", 2.1.15.5 "L3 Cache
Performance Monitor Counter"s and Section 7.1 "Fabric Performance
Monitor Counter (PMC) Events" in the Processor Programming
Reference (PPR) for AMD Family 19h Model 11h Revision B1
processors.
This constitutes events which capture op dispatch, execution and
retirement, branch prediction, L1 and L2 cache activity, TLB
activity, L3 cache activity and data bandwidth for various links
and interfaces in the Data Fabric.
- Also, from the same PPR are metrics taken from Section 2.1.15.2
"Performance Measurement", including pipeline utilization, which
are new to Zen 4 processors and useful for finding performance
bottlenecks by analyzing activity at different stages of the
pipeline.
- Greatly improve the 'srcline', 'srcline_from', 'srcline_to' and
'srcfile' sort keys performance by postponing calling the external
addr2line utility to the collapse phase of histogram bucketing.
- Fix 'perf test' "all PMU test" to skip parametrized events, that
requires setting up and are not supported by this test.
- Update tools/ copies of kernel headers: features,
disabled-features, fscrypt.h, i915_drm.h, msr-index.h, power pc
syscall table and kvm.h.
- Add .DELETE_ON_ERROR special Makefile target to clean up partially
updated files on error.
- Simplify the mksyscalltbl script for arm64 by avoiding to run the
host compiler to create the syscall table, do it all just with the
shell script.
- Further fixes to honour quiet mode (-q)"
* tag 'perf-tools-for-v6.2-2-2022-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (67 commits)
perf python: Fix splitting CC into compiler and options
perf scripting python: Don't be strict at handling libtraceevent enumerations
perf arm64: Simplify mksyscalltbl
perf build: Remove explicit reference to python 2.x devel files
perf vendor events amd: Add Zen 4 mapping
perf vendor events amd: Add Zen 4 metrics
perf vendor events amd: Add Zen 4 uncore events
perf vendor events amd: Add Zen 4 core events
perf vendor events intel: Refresh westmereex events
perf vendor events intel: Refresh westmereep-sp events
perf vendor events intel: Refresh westmereep-dp events
perf vendor events intel: Refresh tigerlake metrics and events
perf vendor events intel: Refresh snowridgex events
perf vendor events intel: Refresh skylakex metrics and events
perf vendor events intel: Refresh skylake metrics and events
perf vendor events intel: Refresh silvermont events
perf vendor events intel: Refresh sapphirerapids metrics and events
perf vendor events intel: Refresh sandybridge metrics and events
perf vendor events intel: Refresh nehalemex events
perf vendor events intel: Refresh nehalemep events
...
Arnaldo Carvalho de Melo [Thu, 22 Dec 2022 13:56:25 +0000 (10:56 -0300)]
perf python: Fix splitting CC into compiler and options
Noticed this build failure on archlinux:base when building with clang:
clang-14: error: optimization flag '-ffat-lto-objects' is not supported [-Werror,-Wignored-optimization-argument]
In tools/perf/util/setup.py we check if clang supports that option, but
since commit
3cad53a6f9cdbafa ("perf python: Account for multiple words
in CC") this got broken as in the common case where CC="clang":
>>> cc="clang"
>>> print(cc.split()[0])
clang
>>> option="-ffat-lto-objects"
>>> print(str(cc.split()[1:]) + option)
[]-ffat-lto-objects
>>>
And then the Popen will call clang with that bogus option name that in
turn will not produce the b"unknown argument" or b"is not supported"
that this function uses to detect if the option is not available and
thus later on clang will be called with an unknown/unsupported option.
Fix it by looking if really there are options in the provided CC
variable, and if so override 'cc' with the first token and append the
options to the 'option' variable.
Fixes:
3cad53a6f9cdbafa ("perf python: Account for multiple words in CC")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Khem Raj <raj.khem@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Link: http://lore.kernel.org/lkml/Y6Rq5F5NI0v1QQHM@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Howells [Fri, 18 Nov 2022 07:57:27 +0000 (07:57 +0000)]
afs: Stop implementing ->writepage()
We're trying to get rid of the ->writepage() hook[1]. Stop afs from using
it by unlocking the page and calling afs_writepages_region() rather than
folio_write_one().
A flag is passed to afs_writepages_region() to indicate that it should only
write a single region so that we don't flush the entire file in
->write_begin(), but do add other dirty data to the region being written to
try and reduce the number of RPC ops.
This requires ->migrate_folio() to be implemented, so point that at
filemap_migrate_folio() for files and also for symlinks and directories.
This can be tested by turning on the afs_folio_dirty tracepoint and then
doing something like:
xfs_io -c "w 2223 7000" -c "w 15000 22222" -c "w 23 7" /afs/my/test/foo
and then looking in the trace to see if the write at position 15000 gets
stored before page 0 gets dirtied for the write at position 23.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20221113162902.883850-1-hch@lst.de/
Link: https://lore.kernel.org/r/166876785552.222254.4403222906022558715.stgit@warthog.procyon.org.uk/
Gaosheng Cui [Fri, 9 Sep 2022 07:03:53 +0000 (15:03 +0800)]
afs: remove afs_cache_netfs and afs_zap_permits() declarations
afs_zap_permits() has been removed since
commit
be080a6f43c4 ("afs: Overhaul permit caching").
afs_cache_netfs has been removed since
commit
523d27cda149 ("afs: Convert afs to use the new fscache API").
so remove the declare for them from header file.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20220909070353.1160228-1-cuigaosheng1@huawei.com/
Colin Ian King [Thu, 20 Oct 2022 17:39:23 +0000 (18:39 +0100)]
afs: remove variable nr_servers
Variable nr_servers is no longer being used, the last reference
to it was removed in commit
45df8462730d ("afs: Fix server list handling")
so clean up the code by removing it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20221020173923.21342-1-colin.i.king@gmail.com/
David Howells [Wed, 21 Dec 2022 14:30:48 +0000 (14:30 +0000)]
afs: Fix lost servers_outstanding count
The afs_fs_probe_dispatcher() work function is passed a count on
net->servers_outstanding when it is scheduled (which may come via its
timer). This is passed back to the work_item, passed to the timer or
dropped at the end of the dispatcher function.
But, at the top of the dispatcher function, there are two checks which
skip the rest of the function: if the network namespace is being destroyed
or if there are no fileservers to probe. These two return paths, however,
do not drop the count passed to the dispatcher, and so, sometimes, the
destruction of a network namespace, such as induced by rmmod of the kafs
module, may get stuck in afs_purge_servers(), waiting for
net->servers_outstanding to become zero.
Fix this by adding the missing decrements in afs_fs_probe_dispatcher().
Fixes:
f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/167164544917.2072364.3759519569649459359.stgit@warthog.procyon.org.uk/
Takashi Iwai [Thu, 22 Dec 2022 08:18:38 +0000 (09:18 +0100)]
Merge tag 'asoc-v6.2-3' of https://git./linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.2
Some more small fixes and board quirks that came in since my last
update, the main one being the fixes from Kai for issues around the
attempts to get kexec working well on SOF based systems.
Jaroslav Kysela [Thu, 15 Dec 2022 15:30:37 +0000 (16:30 +0100)]
ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless
It seems that the firmware is broken and does not accept
the UAC_EP_CS_ATTR_SAMPLE_RATE URB. There is only one rate (48000Hz)
available in the descriptors for the output endpoint.
Create a new quirk QUIRK_FLAG_FIXED_RATE to skip the rate setup
when only one rate is available (fixed).
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216798
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20221215153037.1163786-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jiapeng Chong [Tue, 13 Dec 2022 06:13:55 +0000 (14:13 +0800)]
ALSA: azt3328: Remove the unused function snd_azf3328_codec_outl()
The function snd_azf3328_codec_outl is defined in the azt3328.c file, but
not called elsewhere, so remove this unused function.
sound/pci/azt3328.c:367:1: warning: unused function 'snd_azf3328_codec_outl'.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3432
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221213061355.62856-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 22 Dec 2022 08:11:48 +0000 (09:11 +0100)]
Merge branch 'for-next' into for-linus
Linus Torvalds [Thu, 22 Dec 2022 03:03:42 +0000 (19:03 -0800)]
Merge tag 'trace-v6.2-1' of git://git./linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"I missed this minor hardening of the kernel in the first pull.
- Make monitor structures read only"
* tag 'trace-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv/monitors: Move monitor structure in rodata
Linus Torvalds [Thu, 22 Dec 2022 02:57:24 +0000 (18:57 -0800)]
Merge tag 'trace-probes-v6.2' of git://git./linux/kernel/git/trace/linux-trace
Pull trace probes updates from Steven Rostedt:
- New "symstr" type for dynamic events that writes the name of the
function+offset into the ring buffer and not just the address
- Prevent kernel symbol processing on addresses in user space probes
(uprobes).
- And minor fixes and clean ups
* tag 'trace-probes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Reject symbol/symstr type for uprobe
tracing/probes: Add symstr type for dynamic events
kprobes: kretprobe events missing on 2-core KVM guest
kprobes: Fix check for probe enabled in kill_kprobe()
test_kprobes: Fix implicit declaration error of test_kprobes
tracing: Fix race where eprobes can be called before the event
Linus Torvalds [Thu, 22 Dec 2022 02:52:15 +0000 (18:52 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull RISC-V kvm updates from Paolo Bonzini:
- Allow unloading KVM module
- Allow KVM user-space to set mvendorid, marchid, and mimpid
- Several fixes and cleanups
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
RISC-V: KVM: Add ONE_REG interface for mvendorid, marchid, and mimpid
RISC-V: KVM: Save mvendorid, marchid, and mimpid when creating VCPU
RISC-V: Export sbi_get_mvendorid() and friends
RISC-V: KVM: Move sbi related struct and functions to kvm_vcpu_sbi.h
RISC-V: KVM: Use switch-case in kvm_riscv_vcpu_set/get_reg()
RISC-V: KVM: Remove redundant includes of asm/csr.h
RISC-V: KVM: Remove redundant includes of asm/kvm_vcpu_timer.h
RISC-V: KVM: Fix reg_val check in kvm_riscv_vcpu_set_reg_config()
RISC-V: KVM: Simplify kvm_arch_prepare_memory_region()
RISC-V: KVM: Exit run-loop immediately if xfer_to_guest fails
RISC-V: KVM: use vma_lookup() instead of find_vma_intersection()
RISC-V: KVM: Add exit logic to main.c
Dave Airlie [Thu, 22 Dec 2022 01:02:55 +0000 (11:02 +1000)]
Merge tag 'amd-drm-fixes-6.2-2022-12-21' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-6.2-2022-12-21:
amdgpu:
- Avoid large variable on the stack
- S0ix fixes
- SMU 13.x fixes
- VCN fix
- Add missing fence reference
amdkfd:
- Fix init vm error handling
- Fix double release of compute pasid
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221221205828.6093-1-alexander.deucher@amd.com
Linus Torvalds [Thu, 22 Dec 2022 00:35:26 +0000 (16:35 -0800)]
Merge tag 'block-6.2-2022-12-19' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Various fixes for BFQ (Yu, Yuwei)
- Fix for loop command line parsing (Isaac)
- No need to specifically clear REQ_ALLOC_CACHE on IOPOLL downgrade
anymore (me)
- blk-iocost enum fix for newer gcc (Jiri)
- UAF fix for queue release (Ming)
- blk-iolatency error handling memory leak fix (Tejun)
* tag 'block-6.2-2022-12-19' of git://git.kernel.dk/linux:
block: don't clear REQ_ALLOC_CACHE for non-polled requests
block: fix use-after-free of q->q_usage_counter
block, bfq: only do counting of pending-request for BFQ_GROUP_IOSCHED
blk-iolatency: Fix memory leak on add_disk() failures
loop: Fix the max_loop commandline argument treatment when it is set to 0
block/blk-iocost (gcc13): keep large values in a new enum
block, bfq: replace 0/1 with false/true in bic apis
block, bfq: don't return bfqg from __bfq_bic_change_cgroup()
block, bfq: fix possible uaf for 'bfqq->bic'
Linus Torvalds [Thu, 22 Dec 2022 00:28:25 +0000 (16:28 -0800)]
Merge tag 'io_uring-6.2-2022-12-19' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Improve the locking for timeouts. This was originally queued up for
the initial pull, but I messed up and it got missed. (Pavel)
- Fix an issue with running task_work from the wait path, causing some
inefficiencies (me)
- Add a clear of ->free_iov upfront in the 32-bit compat data
importing, so we ensure that it's always sane at completion time (me)
- Use call_rcu_hurry() for the eventfd signaling (Dylan)
- Ordering fix for multishot recv completions (Pavel)
- Add the io_uring trace header to the MAINTAINERS entry (Ammar)
* tag 'io_uring-6.2-2022-12-19' of git://git.kernel.dk/linux:
MAINTAINERS: io_uring: Add include/trace/events/io_uring.h
io_uring/net: fix cleanup after recycle
io_uring/net: ensure compat import handlers clear free_iov
io_uring: include task_work run after scheduling in wait for events
io_uring: don't use TIF_NOTIFY_SIGNAL to test for availability of task_work
io_uring: use call_rcu_hurry if signaling an eventfd
io_uring: fix overflow handling regression
io_uring: ease timeout flush locking requirements
io_uring: revise completion_lock locking
io_uring: protect cq_timeouts with timeout_lock
Rickard x Andersson [Tue, 20 Dec 2022 10:23:18 +0000 (11:23 +0100)]
gcov: add support for checksum field
In GCC version 12.1 a checksum field was added.
This patch fixes a kernel crash occurring during boot when using
gcov-kernel with GCC version 12.2. The crash occurred on a system running
on i.MX6SX.
Link: https://lkml.kernel.org/r/20221220102318.3418501-1-rickaran@axis.com
Fixes:
977ef30a7d88 ("gcov: support GCC 12.1 and newer compilers")
Signed-off-by: Rickard x Andersson <rickaran@axis.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Tested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Martin Liska <mliska@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liam Howlett [Mon, 19 Dec 2022 16:20:15 +0000 (16:20 +0000)]
test_maple_tree: add test for mas_spanning_rebalance() on insufficient data
Add a test to the maple tree test suite for the spanning rebalance
insufficient node issue does not go undetected again.
Link: https://lkml.kernel.org/r/20221219161922.2708732-3-Liam.Howlett@oracle.com
Fixes:
54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liam Howlett [Mon, 19 Dec 2022 16:20:15 +0000 (16:20 +0000)]
maple_tree: fix mas_spanning_rebalance() on insufficient data
Mike Rapoport contacted me off-list with a regression in running criu.
Periodic tests fail with an RCU stall during execution. Although rare, it
is possible to hit this with other uses so this patch should be backported
to fix the regression.
This patchset adds the fix and a test case to the maple tree test
suite.
This patch (of 2):
An insufficient node was causing an out-of-bounds access on the node in
mas_leaf_max_gap(). The cause was the faulty detection of the new node
being a root node when overwriting many entries at the end of the tree.
Fix the detection of a new root and ensure there is sufficient data prior
to entering the spanning rebalance loop.
Link: https://lkml.kernel.org/r/20221219161922.2708732-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20221219161922.2708732-2-Liam.Howlett@oracle.com
Fixes:
54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Mike Rapoport <rppt@kernel.org>
Tested-by: Mike Rapoport <rppt@kernel.org>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mike Kravetz [Mon, 12 Dec 2022 23:50:41 +0000 (15:50 -0800)]
hugetlb: really allocate vma lock for all sharable vmas
Commit
bbff39cc6cbc ("hugetlb: allocate vma lock for all sharable vmas")
removed the pmd sharable checks in the vma lock helper routines. However,
it left the functional version of helper routines behind #ifdef
CONFIG_ARCH_WANT_HUGE_PMD_SHARE. Therefore, the vma lock is not being
used for sharable vmas on architectures that do not support pmd sharing.
On these architectures, a potential fault/truncation race is exposed that
could leave pages in a hugetlb file past i_size until the file is removed.
Move the functional vma lock helpers outside the ifdef, and remove the
non-functional stubs. Since the vma lock is not just for pmd sharing,
rename the routine __vma_shareable_flags_pmd.
Link: https://lkml.kernel.org/r/20221212235042.178355-1-mike.kravetz@oracle.com
Fixes:
bbff39cc6cbc ("hugetlb: allocate vma lock for all sharable vmas")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / platform / kernel / linux-rpi.git / log