media: rockchip: rga: Introduce color fmt macros and refactor CSC mode logic

This introduces two macros: RGA_COLOR_FMT_IS_YUV and RGA_COLOR_FMT_IS_RGB
which allow quick checking of the colorspace familily of a RGA color format.

These macros are then used to refactor the logic for CSC mode selection.
The two nested tests for input colorspace are simplified into a single one,
with a logical and, making the whole more readable.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: exynos4-is: Add missed check for pinctrl_lookup_state()

fimc_md_get_pinctrl() misses a check for pinctrl_lookup_state().
Add the missed check to fix it.

Fixes: 4163851f7b99 ("[media] s5p-fimc: Use pinctrl API for camera ports configuration]")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: rkisp1: set more precise size errors in debugfs

When a size error is signaled, it is possible to read a register
to see where the error comes from. So, in debugfs the general
error 'pic_size_err' can be replaced with 3 more precise errors.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: tvp5150: Add missed media_entity_cleanup()

This driver does not call media_entity_cleanup() in the error handler
of tvp5150_registered() and tvp5150_remove(), while it has called
media_entity_pads_init() at first.
Add the missed calls to fix it.

Fixes: 0556f1d580d4 ("media: tvp5150: add input source selection of_graph support")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: pxa_camera: remove an impossible condition

It's not possible for "pcdev->mclk" to be zero because we check for
that earlier and set it to 20000000 in that situation.  If it were
possible, that would be a problem because it could have lead to an Oops
in the error handling when we call v4l2_clk_unregister(pcdev->mclk_clk);

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rcar-csi2: Rename confirm_start() to phy_post_init() to match its usage

Since the driver was picked-up the starting of the PHY have changed
quiet a bit. An artifact of these changes is the now poorly named
callback confirm_start(). It used to confirm start of the PHY but now
performs post PHY start initialization, rename it to phy_post_init() to
reflect this.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: docs: dev-decoder: Add one more reason for dynamic change

Add bit-depth change as one more reason which could change in the
middle of the stream. For the worst case the stream is 8bit at the
beginning but later in the bit-stream it changes to 10bit. That
change should be propagated to the client so that it can take the
appropriate action. In that case it has to stop the streaming on
the capture queue, re-negotiate the pixel format, allocate new
buffers and start the streaming again.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: test_drivers: vivid-core: Use array_size() helper

The tpg_alloc() and vmalloc() functions have no 2-factor argument form, so
multiplication factors need to be wrapped in array_size().

This issue was found with the help of Coccinelle and, audited and fixed
manually.

Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: videobuf2: Fix length check for single plane dmabuf queueing

Check against length in v4l2_buffer rather than vb2_buffer when the
buffer is a dmabuf. This makes the single plane test the same as the
existing multiplanar test.

Signed-off-by: John Cox <jc@kynesim.co.uk>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: rkisp1: rsz: fix resolution limitation on sink pad

Resizer sink pad is limited by what the ISP can generate.
The configurations describes what the resizer can produce.

This was tested on a Scarlet device with ChromiumOs, where the selfpath
receives 2592x1944 and produces 1600x1200 (which isn't possible without
this fix).

Fixes: 56e3b29f9f6b2 ("media: staging: rkisp1: add streaming paths")
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: samsung: Rename Samsung and Exynos to lowercase

Fix up inconsistent usage of upper and lowercase letters in "Samsung"
and "Exynos" names.

"SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked
names.  Therefore they should be written with lowercase letters starting
with capital letter.

The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.

Although advertisement materials usually use uppercase "SAMSUNG", the
lowercase version is used in all legal aspects (e.g. on Wikipedia and in
privacy/legal statements on
https://www.samsung.com/semiconductor/privacy-global/).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: rkisp1: rsz: set default format if the given format is not RKISP1_ISP_SD_SRC

When setting the sink format of the 'rkisp1_resizer'
the format should be supported by 'rkisp1_isp' on
the video source pad. This patch checks this condition
and sets the format to default if the condition is false.

Fixes: 56e3b29f9f6b "media: staging: rkisp1: add streaming paths"
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: rkisp1: rename macros 'RKISP1_DIR_*' to 'RKISP1_ISP_SD_*'

The macros 'RKISP1_DIR_*' are flags that indicate on which
pads of the isp subdevice the media bus code is supported. So the
prefix RKISP1_ISP_SD_ is better.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: rkisp1: remove macro RKISP1_DIR_SINK_SRC

The macro RKISP1_DIR_SINK_SRC is a mask of two flags.
The macro hides the fact that it's a mask and the code
is actually more clear if we replace it the with bitwise-or explicitly.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: rkisp1: rsz: supported formats are the isp's src formats, not sink formats

The rkisp1_resizer's enum callback 'rkisp1_rsz_enum_mbus_code'
calls the enum callback of the 'rkisp1_isp' on it's video sink pad.
This is a bug, the resizer should support the same formats
supported by the 'rkisp1_isp' on the source pad (not the sink pad).

Fixes: 56e3b29f9f6b "media: staging: rkisp1: add streaming paths"
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: allegro: Fix some NULL vs IS_ERR() checks in probe

The devm_ioremap() function doesn't return error pointers, it returns
NULL on error.

Fixes: f20387dfd065 ("media: allegro: add Allegro DVT video IP core driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: vb2: Print the queue pointer in debug messages

When debugging issues that involve more than one video queue, messages
related to multiple queues get interleaved without any easy way to tell
which queue they relate to. Fix this by adding a queue name to
vb2_queue, and printing it in all debug messages in the vb2 core and
V4L2 layers. If the name isn't set by drivers, it is automatically
filled with the queue direction and address.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: use v4l2_rect_enclosed helper

Several drivers implement the same enclosed_rectangle() function to
check if a rectangle is enclosed into another. Replace this with the
newly added v4l2_rect_enclosed() helper function.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: v4l2-rect.h: add enclosed rectangle helper

Add a helper function to check if one rectangle is enclosed inside
another.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rcar-csi2: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format

This patch adds support for MEDIA_BUS_FMT_SRGGB8_1X8 format for CSI2
input.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rcar-vin: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format

Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format in rcar-vin by setting
format type to RAW8 in VNMC register and appropriately setting the bpp
and bytesperline to enable V4L2_PIX_FMT_SRGGB8.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rcar-vin: Invalidate pipeline if conversion is not possible on input formats

Up until now the VIN was capable to convert any of its supported input mbus
formats to any of it's supported output pixel formats. With the addition of
RAW formats this is no longer true.

This patch invalidates the pipeline by adding a check if given vin input
format can be converted to supported output pixel format.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: venc: Fix runtime PM imbalance in venc_open

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: venus: fix multiple encoder crash

Currently we are considering the instances which are available
in core->inst list for load calculation in min_loaded_core()
function, but this is incorrect because by the time we call
decide_core() for second instance, the third instance not
filled yet codec_freq_data pointer.

Solve this by considering the instances whose session has started.

Cc: stable@vger.kernel.org # v5.7+
Fixes: 4ebf969375bc ("media: venus: introduce core selection")
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rc: return proper error code on error handling path in init

If lirc_dev_init() fails during module initialization, rc_core_init()
returns 0 denoting success. This can cause different issues during
further operation of the module. The patch fixes the return value of
rc_core_init() on the corresponding error handling path.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: cx23888: remove unused functions

Found with clang:
drivers/media/pci/cx23885/cx23888-ir.c:178:19: warning: unused function 'ns_to_clock_divider' [-Wunused-function]
static inline u16 ns_to_clock_divider(unsigned int ns)
                  ^
drivers/media/pci/cx23885/cx23888-ir.c:184:28: warning: unused function 'clock_divider_to_ns' [-Wunused-function]
static inline unsigned int clock_divider_to_ns(unsigned int divider)
                           ^
drivers/media/pci/cx23885/cx23888-ir.c:202:19: warning: unused function 'freq_to_clock_divider' [-Wunused-function]
static inline u16 freq_to_clock_divider(unsigned int freq,
                  ^

Cc: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: fintek-cir: remove unused function fintek_clear_reg_bit

Found with clang:

drivers/media/rc/fintek-cir.c:55:20: warning: unused function 'fintek_clear_reg_bit' [-Wunused-function]
static inline void fintek_clear_reg_bit(struct fintek_dev *fintek, u8 val, u8 reg)

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: nuvoton-cir: remove setting tx carrier functions

Since this driver could never transmit IR, setting the tx carrier makes
no sense.

Fixes: 87284271b73b8 ("media: rc: nuvoton: remove rudimentary transmit functionality")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: drx-k: remove unused MulDiv32 function

This function has never been used. Found with clang:

drivers/media/dvb-frontends/drxk_hard.c:159:19: warning: unused function 'MulDiv32' [-Wunused-function]
static inline u32 MulDiv32(u32 a, u32 b, u32 c)

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: MAINTAINERS: remove SOC-CAMERA entry

After the removal of the soc_camera driver and the soc_camera.h header
the SOC-CAMERA entry in the MAINTAINERS file can also be removed.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA*

Drop all configs with the CONFIG_SOC_CAMERA prefix since those
have been removed.

SOC_CAMERA support for the sh architecture was removed a long time ago.
Drop it from the configs.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: arch/arm/configs: remove obsolete CONFIG_SOC_CAMERA*

Drop all configs with the CONFIG_SOC_CAMERA prefix since those
have been removed.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: soc_camera.h: remove this unused header

The soc_camera driver has been removed and all board files
that used it have been fixed. This header can now be removed
altogether.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging/media/soc_camera: remove this driver

The soc_camera driver (and related soc_camera-dependent sensor
drivers) is obsolete and depends on BROKEN for a long time now.
Nobody is using it, so it is time to kill it off.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mach-pxa: palmz72/pcm990: remove soc_camera dependencies

The soc_camera driver is about to be removed, so drop camera
support from this board. Note that the soc_camera driver itself has
long since been deprecated and can't be compiled anymore (it depends
on BROKEN), so camera support on this board has been broken for a long
time (at least since 4.9 when the pxa_camera.c was removed from soc_camera).

Note that there is a new pxa_camera.c driver that replaced the old
soc_camera based driver, but using that would require these boards to
be converted to use the device tree.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mach-omap1: board-ams-delta.c: remove soc_camera dependencies

The soc_camera driver is about to be removed, so drop camera
support from this board. Note that the soc_camera driver itself has
long since been deprecated and can't be compiled anymore (it depends
on BROKEN), so camera support on this board has been broken for a long
time (at least since 4.6 when the omap1_camera.c was removed from soc_camera).

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mach-imx: mach-imx27_visstrim_m10.c: remove soc_camera dependencies

The soc_camera.h header driver is about to be removed, so drop camera
support from this board. Note that the soc_camera driver itself has
long since been deprecated and can't be compiled anymore (it depends
on BROKEN), so camera support on this board has been broken for a long
time (at least since 4.6 when the mx2_camera.c was removed from soc_camera).

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: pxa_camera: update MODULE_DESCRIPTION

Remove the confusing SoC Camera reference.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: ov9640: update MODULE_DESCRIPTION

Remove the confusing SoC Camera reference.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: cec: i2c: ch7322: Add ch7322 CEC controller driver

Add a CEC device driver for the Chrontel ch7322 CEC conroller.
This is an I2C device capable of sending and receiving CEC messages.

Signed-off-by: Jeff Chase <jnchase@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: cec: add adap_controls_phys_addr option

Use of the cec notifier framework is required to support
CEC_CAP_CONNECTOR_INFO but some devices do not want physical address
updates from the notifier. This adds an option to allow registering
with a cec notifier without getting address updates.

[hans: document the new adap_controls_phys_addr bool]

Signed-off-by: Jeff Chase <jnchase@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dt-bindings: Add ch7322 media i2c device

The ch7322 is a Chrontel CEC controller.

Signed-off-by: Jeff Chase <jnchase@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: vsp1: dl: Fix NULL pointer dereference on unbind

In commit f3b98e3c4d2e16 ("media: vsp1: Provide support for extended
command pools"), the vsp pointer used for referencing the VSP1 device
structure from a command pool during vsp1_dl_ext_cmd_pool_destroy() was
not populated.

Correctly assign the pointer to prevent the following
null-pointer-dereference when removing the device:

[*] h3ulcb-kf #>
echo fea28000.vsp > /sys/bus/platform/devices/fea28000.vsp/driver/unbind
 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028
 Mem abort info:
   ESR = 0x96000006
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
 Data abort info:
   ISV = 0, ISS = 0x00000006
   CM = 0, WnR = 0
 user pgtable: 4k pages, 48-bit VAs, pgdp=00000007318be000
 [0000000000000028] pgd=00000007333a1003, pud=00000007333a6003, pmd=0000000000000000
 Internal error: Oops: 96000006 [#1] PREEMPT SMP
 Modules linked in:
 CPU: 1 PID: 486 Comm: sh Not tainted 5.7.0-rc6-arm64-renesas-00118-ge644645abf47 #185
 Hardware name: Renesas H3ULCB Kingfisher board based on r8a77951 (DT)
 pstate: 40000005 (nZcv daif -PAN -UAO)
 pc : vsp1_dlm_destroy+0xe4/0x11c
 lr : vsp1_dlm_destroy+0xc8/0x11c
 sp : ffff800012963b60
 x29: ffff800012963b60 x28: ffff0006f83fc440
 x27: 0000000000000000 x26: ffff0006f5e13e80
 x25: ffff0006f5e13ed0 x24: ffff0006f5e13ed0
 x23: ffff0006f5e13ed0 x22: dead000000000122
 x21: ffff0006f5e3a080 x20: ffff0006f5df2938
 x19: ffff0006f5df2980 x18: 0000000000000003
 x17: 0000000000000000 x16: 0000000000000016
 x15: 0000000000000003 x14: 00000000000393c0
 x13: ffff800011a5ec18 x12: ffff800011d8d000
 x11: ffff0006f83fcc68 x10: ffff800011a53d70
 x9 : ffff8000111f3000 x8 : 0000000000000000
 x7 : 0000000000210d00 x6 : 0000000000000000
 x5 : ffff800010872e60 x4 : 0000000000000004
 x3 : 0000000078068000 x2 : ffff800012781000
 x1 : 0000000000002c00 x0 : 0000000000000000
 Call trace:
  vsp1_dlm_destroy+0xe4/0x11c
  vsp1_wpf_destroy+0x10/0x20
  vsp1_entity_destroy+0x24/0x4c
  vsp1_destroy_entities+0x54/0x130
  vsp1_remove+0x1c/0x40
  platform_drv_remove+0x28/0x50
  __device_release_driver+0x178/0x220
  device_driver_detach+0x44/0xc0
  unbind_store+0xe0/0x104
  drv_attr_store+0x20/0x30
  sysfs_kf_write+0x48/0x70
  kernfs_fop_write+0x148/0x230
  __vfs_write+0x18/0x40
  vfs_write+0xdc/0x1c4
  ksys_write+0x68/0xf0
  __arm64_sys_write+0x18/0x20
  el0_svc_common.constprop.0+0x70/0x170
  do_el0_svc+0x20/0x80
  el0_sync_handler+0x134/0x1b0
  el0_sync+0x140/0x180
 Code: b40000c2 f9403a60 d2800084 a9400663 (f9401400)
 ---[ end trace 3875369841fb288a ]---

Fixes: f3b98e3c4d2e16 ("media: vsp1: Provide support for extended command pools")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: cx231xx: remove redundant assignment to variable err

The variable err is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.

Addresses-Coverity: ("Unused value")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-mdp: Remove mtk_mdp_comp.id and supporting functionality

Since components are registered in a list, the numeric component id that
specified a location in an array is not necessary.

Signed-off-by: Eizan Miyamoto <eizan@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-mdp: convert mtk_mdp_dev.comp array to list

The functions mtk_mdp_register/unregister_component have been created to
add / remove items from the list of components.

This will eventually enable us to specify a list of components in the
device tree instead of hardcoding them into this driver.

The list is modified by a single thread at driver probe time, and will
not be traversed by another thread until the call to pm_runtime_enable
at the end of probing.

Signed-off-by: Eizan Miyamoto <eizan@chromium.org>
Reviewed-by: Enric Balletbo I Serra <enric.balletbo@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-mdp: handle vpu_wdt_reg_handler() errors during probe

This is a cleanup to better handle errors during MDP probe.

Signed-off-by: Eizan Miyamoto <eizan@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-mdp: handle vb2_dma_contig_set_max_seg_size errors during probe

This is a cleanup to better handle errors during MDP probe.

Signed-off-by: Eizan Miyamoto <eizan@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-mdp: remove mtk_mdp_comp.regs from mtk_mdp_comp.h

These fields are not used and can be removed.

Signed-off-by: Eizan Miyamoto <eizan@chromium.org>
Reviewed-by: Enric Balletbo I Serra <enric.balletbo@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: mtk-mdp: Remove states for format checks

The mtk-mdp driver uses states to check if the formats have been set
on the capture and output when turning the streaming on, setting
controls or setting the selection rectangles.
Those states are reset when 0 buffers are requested like when checking
capabilities.
This patch removes all format checks and set one by default as queues in
V4L2 are expected to always have a format set.

https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/vidioc-streamon.html
https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/vidioc-g-ctrl.html
https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/vidioc-g-selection.html

Signed-off-by: Francois Buergisser <fbuergisser@chromium.org>
Signed-off-by: Eizan Miyamoto <eizan@chromium.org>
Reviewed-by: Enric Balletbo I Serra <enric.balletbo@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: firewire: Using uninitialized values in node_probe()

If fw_csr_string() returns -ENOENT, then "name" is uninitialized.  So
then the "strlen(model_names[i]) <= name_len" is true because strlen()
is unsigned and -ENOENT is type promoted to a very high positive value.
Then the "strncmp(name, model_names[i], name_len)" uses uninitialized
data because "name" is uninitialized.

Fixes: 92374e886c75 ("[media] firedtv: drop obsolete backend abstraction")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: coda: jpeg: add NULL check after kmalloc

Fixes coccicheck warning:

./drivers/media/platform/coda/coda-jpeg.c:331:3-31:
alloc with no test, possible model on line 354

Add NULL check after kmalloc.

Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: atmel: atmel-sama5d2-isc: fix warning in configs without OF

All warnings (new ones prefixed by >>, old ones prefixed by <<):

>> drivers/media/platform/atmel/atmel-sama5d2-isc.c:323:34: warning: unused variable 'atmel_isc_of_match' [-Wunused-const-variable]
static const struct of_device_id atmel_isc_of_match[] = {
^
1 warning generated.

vim +/atmel_isc_of_match +323 drivers/media/platform/atmel/atmel-sama5d2-isc.c

   322
 > 323  static const struct of_device_id atmel_isc_of_match[] = {
   324          { .compatible = "atmel,sama5d2-isc" },
   325          { }
   326  };
   327  MODULE_DEVICE_TABLE(of, atmel_isc_of_match);
   328

Fixed warning by guarding the atmel_isc_of_match by CONFIG_OF.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: usb: pwc: pwc.h: Replace zero-length array with flexible-array member

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: camss: use proper media entity function for subdevices

Currently for msm_csiphy, msm_csid, and msm_ispif subdevices the media
entity function field is set to MEDIA_ENT_F_IO_V4L. This is incorrect
as MEDIA_ENT_F_IO_V4L implies V4L2 video node.

Change it to MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER as this is the best
fit from the functions defined in include/uapi/linux/media.h.

Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Tested-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: rkisp1: cap: remove support of BGR666 format

The rkisp1 supports RGB encoding with 6 bits per
color with the following format:
- - b5 b4 b3 b2 b1 b0 - - g5 g4 g3 g2 g1 g0 - - r5 r4 r3 r2 r1 r0 - - - - - - - -

This is not how V4L2_PIX_FMT_BGR666 is defined, so remove
this format from the driver's formats list.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: media-request: Fix crash if memory allocation fails

Syzbot reports a NULL-ptr deref in the kref_put() call:

BUG: KASAN: null-ptr-deref in media_request_put drivers/media/mc/mc-request.c:81 [inline]
 kref_put include/linux/kref.h:64 [inline]
 media_request_put drivers/media/mc/mc-request.c:81 [inline]
 media_request_close+0x4d/0x170 drivers/media/mc/mc-request.c:89
 __fput+0x2ed/0x750 fs/file_table.c:281
 task_work_run+0x147/0x1d0 kernel/task_work.c:123
 tracehook_notify_resume include/linux/tracehook.h:188 [inline]
 exit_to_usermode_loop arch/x86/entry/common.c:165 [inline]
 prepare_exit_to_usermode+0x48e/0x600 arch/x86/entry/common.c:196

What led to this crash was an injected memory allocation failure in
media_request_alloc():

FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
 should_failslab+0x5/0x20
 kmem_cache_alloc_trace+0x57/0x300
 ? anon_inode_getfile+0xe5/0x170
 media_request_alloc+0x339/0x440
 media_device_request_alloc+0x94/0xc0
 media_device_ioctl+0x1fb/0x330
 ? do_vfs_ioctl+0x6ea/0x1a00
 ? media_ioctl+0x101/0x120
 ? __media_device_usb_init+0x430/0x430
 ? media_poll+0x110/0x110
 __se_sys_ioctl+0xf9/0x160
 do_syscall_64+0xf3/0x1b0

When that allocation fails, filp->private_data is left uninitialized
which media_request_close() does not expect and crashes.

To avoid this, reorder media_request_alloc() such that
allocating the struct file happens as the last step thus
media_request_close() will no longer get called for a partially created
media request.

Reported-by: syzbot+6bed2d543cf7e48b822b@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Fixes: 10905d70d788 ("media: media-request: implement media requests")
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: ov2740: add NVMEM interface to read customized OTP data

ov2740 includes 512bytes of one-time programmable memory and
256 bytes are reserved for customers which can be used to store
customized information. This patch provide an NVMEM interface
to support read out the customized data in OTP.

Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Qingwu Zhang <qingwu.zhang@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: i2c: imx290: set bus_type before calling v4l2_fwnode_endpoint_alloc_parse()

The bus_type field of v4l2_fwnode_endpoint structure passed as the argument
to v4l2_fwnode_endpoint_alloc_parse() function must be initiaized.
Set it to V4L2_MBUS_CSI2_DPHY, and check for -ENXIO which is returned
when the requested media bus type doesn't match the fwnode.

Also remove v4l2_fwnode_endpoint field from struct imx290 as it is only
needed in the probe function: use the local variable for this purpose.

Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: i2c: imx290: Move the settle time delay out of loop

The 10ms settle time is needed only at the end of all consecutive
register writes. So move the delay to outside of the for loop of
imx290_set_register_array().

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: i2c: imx290: Add support to enumerate all frame sizes

Add support to enumerate all frame sizes supported by IMX290. This is
required for using with userspace tools such as libcamera.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: i2c: imx290: Add RAW12 mode support

IMX290 is capable of outputting frames in both Raw Bayer (packed) 10 and
12 bit formats. Since the driver already supports RAW10 mode, let's add
the missing RAW12 mode as well.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: i2c: imx290: Add support for test pattern generation

Add support for generating following test patterns by IMX290:

* Sequence Pattern 1
* Horizontal Color-bar Chart
* Vertical Color-bar Chart
* Sequence Pattern 2
* Gradation Pattern 1
* Gradation Pattern 2
* 000/555h Toggle Pattern

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: i2c: imx290: Add configurable link frequency and pixel rate

IMX290 operates with multiple link frequency and pixel rate combinations.
The initial driver used a single setting for both but since we now have
the lane count support in place, let's add configurable link frequency
and pixel rate.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: i2c: imx290: Add support for 2 data lanes

The IMX290 sensor can output frames with 2/4 CSI2 data lanes. This commit
adds support for 2 lane mode in addition to the 4 lane and also
configuring the data lane settings in the driver based on system
configuration.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: i2c: imx290: fix reset GPIO pin handling

According to https://www.kernel.org/doc/Documentation/gpio/consumer.txt,

- all of the gpiod_set_value_xxx() functions operate with the *logical*
value. So in imx290_power_on() the reset signal should be cleared
(de-asserted) with gpiod_set_value_cansleep(imx290->rst_gpio, 0), and in
imx290_power_off() the value of 1 must be used to apply/assert the reset
to the sensor. In the device tree the reset pin is described as
GPIO_ACTIVE_LOW, and gpiod_set_value_xxx() functions take this into
account,

- when devm_gpiod_get_optional() is called with GPIOD_ASIS, the GPIO is
not initialized, and the direction must be set later; using a GPIO
without setting its direction first is illegal and will result in undefined
behavior. Fix this by using GPIOD_OUT_HIGH instead of GPIOD_ASIS (this
asserts the reset signal to the sensor initially).

Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: i2c: imx290: fix the order of the args in SET_RUNTIME_PM_OPS()

The macro is defined as SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn),
so imx290_power_off must be the 1st arg, and imx290_power_on the 2nd.

Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: i2c: imx290: set the format before VIDIOC_SUBDEV_G_FMT is called

With the current driver 'media-ctl -p' issued right after the imx290 driver
is loaded prints:
pad0: Source
             [fmt:unknown/0x0]

The format value of zero is due to the current_format field of the imx290
struct not being initialized yet.

As imx290_entity_init_cfg() calls imx290_set_fmt(), the current_mode field
is also initialized, so the line which set current_mode to a default value
in driver's probe() function is no longer needed.

Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: omap3isp: Add missed v4l2_ctrl_handler_free() for preview_init_entities()

preview_init_entities() does not call v4l2_ctrl_handler_free() when
it fails.
Add the missed function to fix it.

Fixes: de1135d44f4f ("[media] omap3isp: CCDC, preview engine and resizer")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: marvell-ccic: Add missed v4l2_async_notifier_cleanup()

mccic_register() forgets to cleanup the notifier in its error handler.
mccic_shutdown() also misses calling v4l2_async_notifier_cleanup().
Add the missed calls to fix them.

Fixes: 3eefe36cc00c ("media: marvell-ccic: use async notifier to get the sensor")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: ov2740: make ov2740 driver only work with ACPI

As the ACPI id of ov2740 camera sensor was registered as "INT3474",
current ov2740 driver is supposed to be working with ACPI only.

Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: smiapp: Use pm_runtime_get_if_active

Use the convenience function pm_runtime_get_if_active() instead of a
number of calls to runtime PM to figure out if the device was already
powered up.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: smiapp: Fix runtime PM imbalance on error

When v4l2_async_register_subdev_sensor_common() returns
an error code, a pairing runtime PM usage counter
decrement is needed to keep the counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: media/cec.h: document cec_adapter fields

Document this core CEC structure.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: cec: remove unused waitq and phys_addrs fields

The cec_adapter struct contained a waitq field that isn't used
anywhere, so drop this.

It also contained a phys_addrs array to store any reported physical
addresses. However, this was never actually used, so this field is
removed as well. The original idea was to let the core keep track of
this information, but nothing was ever done with this. Should this
be needed in the future then it is easy enough to resurrect this.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: cec-ioc-adap-g-caps.rst: document available_log_addrs

The CEC_ADAP_G_CAPS documentation of the cec_caps struct was missing
the available_log_addrs field. Add this.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: budget-core: Improve exception handling in budget_register()

budget_register() has no error handling after its failure.
Add the missed undo functions for error handling to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: pci: ttpci: av7110: fix possible buffer overflow caused by bad DMA value in debiirq()

The value av7110->debi_virt is stored in DMA memory, and it is assigned
to data, and thus data[0] can be modified at any time by malicious
hardware. In this case, "if (data[0] < 2)" can be passed, but then
data[0] can be changed into a large number, which may cause buffer
overflow when the code "av7110->ci_slot[data[0]]" is used.

To fix this possible bug, data[0] is assigned to a local variable, which
replaces the use of data[0].

Signed-off-by: Jia-Ju Bai <baijiaju@tsinghua.edu.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dvbsky: MyGica T230* receivers also do DVB-C and DVB-T

MyGica T230* receivers also do DVB-C and DVB-T: change their names.

Signed-off-by: Jan Pieter van Woerkom <jp@jpvw.nl>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: cxusb-analog: fix V4L2 dependency

CONFIG_DVB_USB_CXUSB_ANALOG is a 'bool' symbol with a dependency on the
tristate CONFIG_VIDEO_V4L2, which means it can be enabled as =y even
when its dependency is =m. This leads to a link failure:

drivers/media/usb/dvb-usb/cxusb-analog.o: In function `cxusb_medion_analog_init':
cxusb-analog.c:(.text+0x92): undefined reference to `v4l2_subdev_call_wrappers'
drivers/media/usb/dvb-usb/cxusb-analog.o: In function `cxusb_medion_register_analog':
cxusb-analog.c:(.text+0x466): undefined reference to `v4l2_device_register'
cxusb-analog.c:(.text+0x4c3): undefined reference to `v4l2_i2c_new_subdev'
cxusb-analog.c:(.text+0x4fb): undefined reference to `v4l2_subdev_call_wrappers'
...

Change the dependency only disallow the analog portion of the driver
in that configuration.

Fixes: e478d4054054 ("media: cxusb: add analog mode support for Medion MD95700")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: MAINTAINERS: rc-core and lirc maintainership

This has been maintained for some time, update MAINTAINERS to reflect.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: USB: cdc-acm: blacklist IR Droid / IR Toy device

The IR Droid / IR Toy device used custom protocol over serial
line, so it is presenting itself as CDC ACM device.

Now that we have proper in-kernel driver for it we need to black-list the
device in cdc-acm driver.

http://dangerousprototypes.com/docs/USB_Infrared_Toy
https://www.irdroid.com/irdroid-usb-ir-transceiver/

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rc: add support for Infrared Toy and IR Droid devices

http://dangerousprototypes.com/docs/USB_Infrared_Toy
https://www.irdroid.com/irdroid-usb-ir-transceiver/

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dev-encoder.rst: add GFDL-1-1+ to SPDX header

The media documents under the uAPI should be GFDL compatible.

So, make this one dual-licensed GPL-2.0 or GFDL-1.1+ with
no-invariant sections.

Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dev-encoder.rst: add reference to V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL

Setting the stateful encoder capture frame interval is only supported
if this flag is set. Document this.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: videodev2.h: add V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL flag

Add the V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL flag to signal that
the coded frame interval can be set separately from the raw frame
interval for stateful encoders.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: dev-decoder.rst: small fixes

Add missing periods at the end of two sentences.

Although mandatory -> Although not mandatory

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: vidioc-g-parm.rst: update the VIDIOC_G/S_PARM documentation

This documentation is very outdated. In particular, it is
not obvious at all that this is used to change the framerate of
sensors.

Fix it, and include references to the stateful encoder API where
this works slightly different.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: docs-rst: Document memory-to-memory video encoder interface

Due to complexity of the video encoding process, the V4L2 drivers of
stateful encoder hardware require specific sequences of V4L2 API calls
to be followed. These include capability enumeration, initialization,
encoding, encode parameters change, drain and reset.

Specifics of the above have been discussed during Media Workshops at
LinuxCon Europe 2012 in Barcelona and then later Embedded Linux
Conference Europe 2014 in Düsseldorf. The de facto Codec API that
originated at those events was later implemented by the drivers we already
have merged in mainline, such as s5p-mfc or coda.

The only thing missing was the real specification included as a part of
Linux Media documentation. Fix it now and document the encoder part of
the Codec API.

Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: vivid: add cache_hints module param

Add a cache_hints module param to control per-queue user space cache
hints support.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: videobuf2: remove redundant if-statement

That if-statement seems to be unneeded.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: videobuf2: don't test db_attach in dma-contig prepare and finish

We moved cache management decision making to the upper layer and
rely on buffer's need_cache_sync flags and videobuf2 core. If the
upper layer (core) has decided to invoke ->prepare() or ->finish()
then we must sync.

For DMABUF ->need_cache_sync_on_prepare and ->need_cache_sync_on_flush
are always false so videobuf core does not call ->prepare() and
->finish() on such buffers.

Additionally, scratch the DMABUF comment.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: videobuf2: add begin/end cpu_access callbacks to dma-sg

Provide begin_cpu_access() and end_cpu_access() dma_buf_ops
callbacks for cache synchronisation on exported buffers.

V4L2_FLAG_MEMORY_NON_CONSISTENT has no effect on dma-sg buffers.
dma-sg allocates memory using the page allocator directly, so
there is no memory consistency guarantee.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: videobuf2: add begin/end cpu_access callbacks to dma-contig

Provide begin_cpu_access() and end_cpu_access() callbacks for
cache synchronisation on exported buffers.

The patch also adds a new helper function - vb2_dc_buffer_consistent(),
which returns true is if the buffer is consistent (DMA_ATTR_NON_CONSISTENT
bit cleared), so then we don't need to sync anything.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: videobuf2: check ->synced flag in prepare() and finish()

This simplifies the code a tiny bit and let's us to avoid
unneeded ->prepare()/->finish() calls.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: videobuf2: do not sync caches when we are allowed not to

Skip ->prepare() or/and ->finish() cache synchronisation if
user-space requested us to do so (or when queue dma direction
permits us to skip cache syncs).

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: videobuf2: factor out planes prepare/finish functions

Factor out the code, no functional changes.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: videobuf2: handle V4L2_FLAG_MEMORY_NON_CONSISTENT flag

This patch lets user-space to request a non-consistent memory
allocation during CREATE_BUFS and REQBUFS ioctl calls.

= CREATE_BUFS

  struct v4l2_create_buffers has seven 4-byte reserved areas,
  so reserved[0] is renamed to ->flags. The struct, thus, now
  has six reserved 4-byte regions.

= CREATE_BUFS32

  struct v4l2_create_buffers32 has seven 4-byte reserved areas,
  so reserved[0] is renamed to ->flags. The struct, thus, now
  has six reserved 4-byte regions.

= REQBUFS

 We use one bit of a ->reserved[1] member of struct v4l2_requestbuffers,
 which is now renamed to ->flags. Unlike v4l2_create_buffers, struct
 v4l2_requestbuffers does not have enough reserved room. Therefore for
 backward compatibility  ->reserved and ->flags were put into anonymous
 union.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: videobuf2: add queue memory consistency parameter

Preparations for future V4L2_FLAG_MEMORY_NON_CONSISTENT support.

Extend vb2_core_reqbufs() parameters list to accept requests'
->flags, which will be used for memory consistency configuration.

An attempt to allocate a buffer with consistency requirements
which don't match queue's consistency model will fail.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: videobuf2: add V4L2_FLAG_MEMORY_NON_CONSISTENT flag

By setting or clearing V4L2_FLAG_MEMORY_NON_CONSISTENT flag
user-space should be able to set or clear queue's NON_CONSISTENT
->dma_attrs. Queue's ->dma_attrs are passed to the underlying
allocator in __vb2_buf_mem_alloc(), so thus user-space is able
to request vb2 buffer's memory to be either consistent (coherent)
or non-consistent.

The patch set also adds a corresponding capability flag:
fill_buf_caps() reports V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS
when queue supports user-space cache management hints. Note,
however, that MMAP_CACHE_HINTS capability only valid when the
queue is used for memory MMAP-ed streaming I/O.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>