Martin Sebor [Mon, 18 Nov 2019 22:14:16 +0000 (22:14 +0000)]
PR middle-end/92493 - ICE in get_origin_and_offset at gimple-ssa-sprintf.c
gcc/ChangeLog:
PR tree-optimization/92493
* gimple-ssa-sprintf.c (get_origin_and_offset): Remove spurious
assignment.
gcc/testsuite/ChangeLog:
PR tree-optimization/92493
* gcc.dg/pr92493.c: New test.
From-SVN: r278423
Giuliano Belinassi [Mon, 18 Nov 2019 20:05:16 +0000 (20:05 +0000)]
Refactor tree-loop-distribution.c for thread safety
This patch refactors tree-loop-distribution.c for thread safety without
use of C11 __thread feature. All global variables were moved to
`class loop_distribution` which is initialized at ::execute time.
From-SVN: r278421
Jan Hubicka [Mon, 18 Nov 2019 19:28:53 +0000 (20:28 +0100)]
re PR ipa/92508 (ICE in do_estimate_edge_time, at ipa-inline-analysis.c:223 since r278159)
PR ipa/92508
* ipa-inline.c (inline_small_functions): Add new edges after reseting
caches.
* ipa-inline-analysis.c (do_estimate_edge_time): Fix sanity check.
From-SVN: r278419
Joseph Myers [Mon, 18 Nov 2019 17:41:40 +0000 (17:41 +0000)]
Add more C2x attributes tests.
This patch adds more tests of C2x attributes, where I found cases that
were handled correctly by my patches but missing from the original
tests. Tests are added for -std=c11 -pedantic handling of C2x
attribute syntax and corresponding -Wc11-c2x-compat handling; for
struct [[deprecated]]; and for the [[__fallthrough__]] spelling of
[[fallthrough]] in the case of valid fallthrough attributes.
Tested for x86_64-pc-linux-gnu.
* gcc.dg/c11-attr-syntax-1.c, gcc.dg/c11-attr-syntax-2.c,
gcc.dg/c11-attr-syntax-3.c, gcc.dg/c2x-attr-syntax-4.c: New tests.
* gcc.dg/c2x-attr-deprecated-1.c: Also test struct [[deprecated]].
* gcc.dg/c2x-attr-fallthrough-1.c: Also test [[__fallthrough__]].
From-SVN: r278418
Marek Polacek [Mon, 18 Nov 2019 16:39:24 +0000 (16:39 +0000)]
PR c++/91962 - ICE with reference binding and qualification conversion.
When fixing c++/91889 (r276251) I was assuming that we couldn't have a ck_qual
under a ck_ref_bind, and I was introducing it in the patch and so this
+ if (next_conversion (convs)->kind == ck_qual)
+ {
+ gcc_assert (same_type_p (TREE_TYPE (expr),
+ next_conversion (convs)->type));
+ /* Strip the cast created by the ck_qual; cp_build_addr_expr
+ below expects an lvalue. */
+ STRIP_NOPS (expr);
+ }
in convert_like_real was supposed to handle it. But that assumption was wrong
as this test shows; here we have "(int *)f" where f is of type long int, and
we're converting it to "const int *const &", so we have both ck_ref_bind and
ck_qual. That means that the new STRIP_NOPS strips an expression it shouldn't
have, and that then breaks when creating a TARGET_EXPR. So we want to limit
the stripping to the new case only. This I do by checking need_temporary_p,
which will be 0 in the new case. Yes, we can set need_temporary_p when
binding a reference directly, but then we won't have a qualification
conversion. It is possible to have a bit-field, convert it to a pointer,
and then convert that pointer to a more-qualified pointer, but in that case
we're not dealing with an lvalue, so gl_kind is 0, so we won't enter this
block in reference_binding:
1747 if ((related_p || compatible_p) && gl_kind)
* call.c (convert_like_real) <case ck_ref_bind>: Check need_temporary_p.
* g++.dg/cpp0x/ref-bind7.C: New test.
From-SVN: r278416
Martin Jambor [Mon, 18 Nov 2019 15:50:06 +0000 (16:50 +0100)]
Add testcase for already fixed PR ipa/92528
2019-11-18 Martin Jambor <mjambor@suse.cz>
PR ipa/92528
* g++.dg/ipa/pr92528.C: New test.
From-SVN: r278415
Richard Sandiford [Mon, 18 Nov 2019 15:36:10 +0000 (15:36 +0000)]
Add optabs for accelerating RAW and WAR alias checks
This patch adds optabs that check whether a read followed by a write
or a write followed by a read can be divided into interleaved byte
accesses without changing the dependencies between the bytes.
This is one of the uses of the SVE2 WHILERW and WHILEWR instructions.
(The instructions can also be used to limit the VF at runtime,
but that's future work.)
2019-11-18 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* doc/sourcebuild.texi (vect_check_ptrs): Document.
* optabs.def (check_raw_ptrs_optab, check_war_ptrs_optab): New optabs.
* doc/md.texi: Document them.
* internal-fn.def (IFN_CHECK_RAW_PTRS, IFN_CHECK_WAR_PTRS): New
internal functions.
* internal-fn.h (internal_check_ptrs_fn_supported_p): Declare.
* internal-fn.c (check_ptrs_direct): New macro.
(expand_check_ptrs_optab_fn): Likewise.
(direct_check_ptrs_optab_supported_p): Likewise.
(internal_check_ptrs_fn_supported_p): New fuction.
* tree-data-ref.c: Include internal-fn.h.
(create_ifn_alias_checks): New function.
(create_intersect_range_checks): Use it.
* config/aarch64/iterators.md (SVE2_WHILE_PTR): New int iterator.
(optab, cmp_op): Handle it.
(raw_war, unspec): New int attributes.
* config/aarch64/aarch64.md (UNSPEC_WHILERW, UNSPEC_WHILE_WR): New
constants.
* config/aarch64/predicates.md (aarch64_bytes_per_sve_vector_operand):
New predicate.
* config/aarch64/aarch64-sve2.md (check_<raw_war>_ptrs<mode>): New
expander.
(@aarch64_sve2_while<cmp_op><GPI:mode><PRED_ALL:mode>_ptest): New
pattern.
gcc/testsuite/
* lib/target-supports.exp (check_effective_target_vect_check_ptrs):
New procedure.
* gcc.dg/vect/vect-alias-check-14.c: Expect IFN_CHECK_WAR to be
used, if available.
* gcc.dg/vect/vect-alias-check-15.c: Likewise.
* gcc.dg/vect/vect-alias-check-16.c: Likewise IFN_CHECK_RAW.
* gcc.target/aarch64/sve2/whilerw_1.c: New test.
* gcc.target/aarch64/sve2/whilewr_1.c: Likewise.
* gcc.target/aarch64/sve2/whilewr_2.c: Likewise.
From-SVN: r278414
Richard Sandiford [Mon, 18 Nov 2019 15:29:53 +0000 (15:29 +0000)]
Add an empty constructor shortcut to build_vector_from_ctor
Empty vector constructors are equivalent to zero vectors. If we handle
that case directly, we can support it for variable-length vectors and
can hopefully make things more efficient for fixed-length vectors.
This is needed by a later C++ patch.
2019-11-18 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree.c (build_vector_from_ctor): Directly return a zero vector for
empty constructors.
From-SVN: r278413
Richard Sandiford [Mon, 18 Nov 2019 15:29:03 +0000 (15:29 +0000)]
Two RTL CC tweaks for SVE pmore/plast conditions
SVE has two composite conditions:
pmore == at least one bit set && last bit clear
plast == no bits set || last bit set
So in general we generate them from:
A: CC = test bits
B: reg1 = first condition
C: CC = test bits
D: reg2 = second condition
E: result = (reg1 op reg2) where op is || or &&
To fold all this into a single test, we need to be able to remove
the redundant C (the cse.c patch) and then fold B, D and E down to
a single condition (the simplify-rtx.c patch).
The underlying conditions are unsigned, so the simplify-rtx.c part needs
to support both unsigned comparisons and AND. However, to avoid opening
the can of worms that is ANDing FP comparisons for unordered inputs,
I've restricted the new AND handling to cases in which NaNs can be
ignored. I think this is still a strict extension of what we have now,
it just doesn't go as far as it could. Going further would need an
entirely different set of testcases so I think would make more sense
as separate work.
2019-11-18 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* cse.c (cse_insn): Delete no-op register moves too.
* simplify-rtx.c (comparison_to_mask): Handle unsigned comparisons.
Take a second comparison to control the value for NE.
(mask_to_comparison): Handle unsigned comparisons.
(simplify_logical_relational_operation): Likewise. Update call
to comparison_to_mask. Handle AND if !HONOR_NANs.
(simplify_binary_operation_1): Call the above for AND too.
gcc/testsuite/
* gcc.target/aarch64/sve/acle/asm/ptest_pmore.c: New test.
From-SVN: r278411
Richard Sandiford [Mon, 18 Nov 2019 15:27:56 +0000 (15:27 +0000)]
Handle VIEW_CONVERT_EXPR for variable-length vectors
This patch handles VIEW_CONVERT_EXPRs of variable-length VECTOR_CSTs
by adding tree-level versions of native_decode_vector_rtx and
simplify_const_vector_subreg. It uses the same code for fixed-length
vectors, both to get more coverage and because operating directly on
the compressed encoding should be more efficient for longer vectors
with a regular pattern.
The structure and comments are very similar between the tree and
rtx routines.
2019-11-18 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* fold-const.c (native_encode_vector): Turn into a wrapper function,
splitting the main code out into...
(native_encode_vector_part): ...this new function.
(native_decode_vector_tree): New function.
(fold_view_convert_vector_encoding): Likewise.
(fold_view_convert_expr): Use it for converting VECTOR_CSTs
to VECTOR_TYPEs.
gcc/testsuite/
* gcc.target/aarch64/sve/acle/general/temporaries_1.c: New test.
From-SVN: r278410
Richard Sandiford [Mon, 18 Nov 2019 15:26:55 +0000 (15:26 +0000)]
Optimise WAR and WAW alias checks
For:
void
f1 (int *x, int *y)
{
for (int i = 0; i < 32; ++i)
x[i] += y[i];
}
we checked at runtime whether one vector at x would overlap one vector
at y. But in cases like this, the vector code would handle x <= y just
fine, since any write to address A still happens after any read from
address A. The only problem is if x is ahead of y by less than a
vector.
The same is true for two writes:
void
f2 (int *x, int *y)
{
for (int i = 0; i < 32; ++i)
{
x[i] = i;
y[i] = 2;
}
}
if y <= x then a vector write at y after a vector write at x would
have the same net effect as the original scalar writes.
This patch optimises the alias checks for these two cases. E.g.,
before the patch, f1 used:
add x2, x0, 15
sub x2, x2, x1
cmp x2, 30
bls .L2
whereas after the patch it uses:
add x2, x1, 4
sub x2, x0, x2
cmp x2, 8
bls .L2
Read-after-write cases like:
int
f3 (int *x, int *y)
{
int res = 0;
for (int i = 0; i < 32; ++i)
{
x[i] = i;
res += y[i];
}
return res;
}
can cope with x == y, but otherwise don't allow overlap in either
direction. Since checking for x == y at runtime would require extra
code, we're probably better off sticking with the current overlap test.
An overlap test is also needed if the scalar or vector accesses covered
by the alias check are mixed together, rather than all statements for
the second access following all statements for the first access.
The new code for gcc.target/aarch64/sve/var_strict_[135].c is slightly
better than before.
2019-11-18 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-data-ref.c (create_intersect_range_checks_index): If the
alias pair describes simple WAW and WAR dependencies, just check
whether the first B access overlaps later A accesses.
(create_waw_or_war_checks): New function that performs the same
optimization on addresses.
(create_intersect_range_checks): Call it.
gcc/testsuite/
* gcc.dg/vect/vect-alias-check-8.c: Expect WAR/WAW checks to be used.
* gcc.dg/vect/vect-alias-check-14.c: Likewise.
* gcc.dg/vect/vect-alias-check-15.c: Likewise.
* gcc.dg/vect/vect-alias-check-18.c: Likewise.
* gcc.dg/vect/vect-alias-check-19.c: Likewise.
* gcc.target/aarch64/sve/var_stride_1.c: Update expected sequence.
* gcc.target/aarch64/sve/var_stride_2.c: Likewise.
* gcc.target/aarch64/sve/var_stride_3.c: Likewise.
* gcc.target/aarch64/sve/var_stride_5.c: Likewise.
From-SVN: r278409
Richard Sandiford [Mon, 18 Nov 2019 15:26:07 +0000 (15:26 +0000)]
LRA: handle memory constraints that accept more than "m"
LRA allows address constraints that are more relaxed than "p":
/* Target hooks sometimes don't treat extra-constraint addresses as
legitimate address_operands, so handle them specially. */
if (insn_extra_address_constraint (cn)
&& satisfies_address_constraint_p (&ad, cn))
return change_p;
For SVE it's useful to allow the same thing for memory constraints.
The particular use case is LD1RQ, which is an SVE instruction that
addresses Advanced SIMD vector modes and that accepts some addresses
that normal Advanced SIMD moves don't.
Normally we require every memory to satisfy at least "m", which is
defined to be a memory "with any kind of address that the machine
supports in general". However, LD1RQ is very much special-purpose:
it doesn't really have any relation to normal operations on these
modes. Adding its addressing modes to "m" would lead to bad Advanced
SIMD optimisation decisions in passes like ivopts. LD1RQ therefore
has a memory constraint that accepts things "m" doesn't.
2019-11-18 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* lra-constraints.c (valid_address_p): Take the operand and a
constraint as argument. If the operand is a MEM and the constraint
is a memory constraint, check whether the eliminated form of the
MEM already satisfies the constraint.
(process_address_1): Update calls accordingly.
gcc/testsuite/
* gcc.target/aarch64/sve/acle/asm/ld1rq_f16.c: Remove XFAIL.
* gcc.target/aarch64/sve/acle/asm/ld1rq_f32.c: Likewise.
* gcc.target/aarch64/sve/acle/asm/ld1rq_f64.c: Likewise.
* gcc.target/aarch64/sve/acle/asm/ld1rq_s16.c: Likewise.
* gcc.target/aarch64/sve/acle/asm/ld1rq_s32.c: Likewise.
* gcc.target/aarch64/sve/acle/asm/ld1rq_s64.c: Likewise.
* gcc.target/aarch64/sve/acle/asm/ld1rq_u16.c: Likewise.
* gcc.target/aarch64/sve/acle/asm/ld1rq_u32.c: Likewise.
* gcc.target/aarch64/sve/acle/asm/ld1rq_u64.c: Likewise.
From-SVN: r278408
Tom Tromey [Mon, 18 Nov 2019 14:22:57 +0000 (14:22 +0000)]
Remove vestiges of MODIFY_JNI_METHOD_CALL
I happened to notice that MODIFY_JNI_METHOD_CALL was defined in
cygming.h and documented in tm.texi. However, because it was only
needed for gcj, it is obsolete. This patch removes the vestiges.
Tested by grep, and rebuilding the documentation.
gcc/ChangeLog
2019-11-18 Tom Tromey <tromey@adacore.com>
* doc/tm.texi: Rebuild.
* doc/tm.texi.in (Misc): Don't document MODIFY_JNI_METHOD_CALL.
* config/i386/cygming.h (MODIFY_JNI_METHOD_CALL): Don't define.
From-SVN: r278407
Richard Biener [Mon, 18 Nov 2019 14:07:11 +0000 (14:07 +0000)]
re PR tree-optimization/92516 (ICE in vect_schedule_slp_instance, at tree-vect-slp.c:4095 since r278246)
2019-11-18 Richard Biener <rguenther@suse.de>
PR tree-optimization/92516
* tree-vect-slp.c (vect_analyze_slp_instance): Add bst_map
argument, hoist bst_map creation/destruction to ...
(vect_analyze_slp): ... here, forming a true graph with
SLP instances being the entries.
(vect_detect_hybrid_slp_stmts): Remove wrapper.
(vect_detect_hybrid_slp): Use one visited set for all
graph entries.
(vect_slp_analyze_node_operations): Simplify visited/lvisited
to hash-sets of slp_tree.
(vect_slp_analyze_operations): Likewise.
(vect_bb_slp_scalar_cost): Remove wrapper.
(vect_bb_vectorization_profitable_p): Use one visited set for
all graph entries.
(vect_schedule_slp_instance): Elide bst_map use.
(vect_schedule_slp): Likewise.
* g++.dg/vect/slp-pr92516.cc: New testcase.
2019-11-18 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_analyze_slp_instance): When a CTOR
was vectorized with just external refs fail.
* gcc.dg/vect/vect-ctor-1.c: New testcase.
From-SVN: r278406
Martin Liska [Mon, 18 Nov 2019 13:04:57 +0000 (14:04 +0100)]
Unset m_checker in sem_function::init.
2019-11-18 Martin Liska <mliska@suse.cz>
PR ipa/92525
* ipa-icf.c (sem_function::init): Unset m_checker
at the end of the function.
From-SVN: r278405
Martin Liska [Mon, 18 Nov 2019 12:54:11 +0000 (13:54 +0100)]
Remove strange dump suboptions in testsuite.
2019-11-18 Martin Liska <mliska@suse.cz>
* gcc.dg/ipa/ipa-icf-36.c: Remove 'all-all-all'.
* gcc.dg/ipa/ipa-icf-37.c: Likewise.
From-SVN: r278404
Szabolcs Nagy [Mon, 18 Nov 2019 12:46:56 +0000 (12:46 +0000)]
fix ChangeLog to reference the PR
From-SVN: r278403
Jonathan Wakely [Mon, 18 Nov 2019 12:46:08 +0000 (12:46 +0000)]
libstdc++: Fix std::jthread bugs
The std::jthread::get_id() function was missing a return statement.
The is_invocable check needs to be done using decayed types, as they'll
be forwarded to std::invoke as rvalues.
Also reduce header dependencies for the <thread> header. We don't need
to include <functional> for std::jthread because <bits/invoke.h> is
already included, which defines std::__invoke. We can also remove
<bits/functexcept.h> which isn't used at all. Finally, when
_GLIBCXX_HAS_GTHREADS is not defined there's no point including any
other headers, since we're not going to define anything in <thread>
anyway.
* include/std/thread: Reduce header dependencies.
(jthread::get_id()): Add missing return.
(jthread::get_stop_token()): Avoid unnecessary stop_source temporary.
(jthread::_S_create): Check is_invocable using decayed types. Add
static assertion.
* testsuite/30_threads/jthread/1.cc: Add dg-require-gthreads.
* testsuite/30_threads/jthread/2.cc: Likewise.
* testsuite/30_threads/jthread/3.cc: New test.
* testsuite/30_threads/jthread/jthread.cc: Add missing directives for
pthread and gthread support. Use VERIFY instead of assert.
From-SVN: r278402
Jonathan Wakely [Mon, 18 Nov 2019 12:46:02 +0000 (12:46 +0000)]
libstdc++: Fix some -Wsystem-headers warnings
* include/bits/alloc_traits.h (allocator_traits::construct)
(allocator_traits::destroy, allocator_traits::max_size): Add unused
attributes to parameters that are not used in C++20.
* include/std/bit (__ceil2): Add braces around assertion to avoid
-Wmissing-braces warning.
From-SVN: r278401
Richard Biener [Mon, 18 Nov 2019 12:41:11 +0000 (12:41 +0000)]
re PR tree-optimization/92558 (Miscompare of 554.roms_r with -Ofast -march=znver2 -flto since r278289)
2019-11-18 Richard Biener <rguenther@suse.de>
PR tree-optimization/92558
* tree-vect-loop.c (vect_create_epilog_for_reduction): When
reducting the width of a reduction vector def update new_phis.
* gcc.dg/vect/pr92558.c: New testcase.
From-SVN: r278400
Szabolcs Nagy [Mon, 18 Nov 2019 12:08:18 +0000 (12:08 +0000)]
musl: Don't use gthr weak refs in libgcc PR91737
The gthr weak reference based single thread detection is unsafe with
static linking and in case of dynamic linking it's ineffective on musl
since pthread symbols are defined in libc.so.
(Ideally this should be fixed for all targets, since glibc plans to move
libpthread.so into libc.so too and users want to static link to pthread
without --whole-archive: PR87189.)
For now we have to explicitly opt out from the broken behaviour in the
config machinery of each target lib and libgcc was previously missed.
libgcc/ChangeLog:
2019-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config.host: Add t-gthr-noweak on *-*-musl*.
* config/t-gthr-noweak: New file.
From-SVN: r278399
Szabolcs Nagy [Mon, 18 Nov 2019 12:03:18 +0000 (12:03 +0000)]
musl: use correct long double abi by default
On powerpc and s390x the musl ABI requires 64 bit and 128 bit long
double respectively, so adjust the default.
gcc/ChangeLog:
2019-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
* configure.ac (gcc_cv_target_ldbl128): Set for powerpc*-*-linux-musl*
and s390*-*-linux-musl* targets.
* configure: Regenerate.
From-SVN: r278398
Szabolcs Nagy [Mon, 18 Nov 2019 12:00:45 +0000 (12:00 +0000)]
s390: add musl support
Add the musl dynamic linker names.
gcc/ChangeLog:
2019-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/s390/linux.h (MUSL_DYNAMIC_LINKER32): Define.
(MUSL_DYNAMIC_LINKER64): Define.
From-SVN: r278397
Martin Liska [Mon, 18 Nov 2019 11:51:20 +0000 (12:51 +0100)]
Improve -dbg-cnt error message and support :0.
2019-11-18 Martin Liska <mliska@suse.cz>
* dbgcnt.c (dbg_cnt_set_limit_by_name): Provide error
message for an unknown counter.
(dbg_cnt_process_single_pair): Support 0 as minimum value.
(dbg_cnt_process_opt): Remove unreachable code.
From-SVN: r278396
Martin Liska [Mon, 18 Nov 2019 11:51:05 +0000 (12:51 +0100)]
Verify NOP_EXPR LHS type in IPA ICF.
2019-11-18 Martin Liska <mliska@suse.cz>
PR ipa/92529
* ipa-icf-gimple.c (func_checker::compare_gimple_assign):
Compare LHS types of NOP_EXPR.
2019-11-18 Martin Liska <mliska@suse.cz>
PR ipa/92529
* gcc.dg/ipa/pr92529.c: New test.
From-SVN: r278395
Matthew Malcomson [Mon, 18 Nov 2019 11:16:46 +0000 (11:16 +0000)]
[mid-end][__RTL] Clean state despite unspecified __RTL startwith passes
Hi there,
When compiling an __RTL function that has an unspecified "startwith"
pass we currently don't run the cleanup pass, this means that we ICE on
the next function (if it's a basic function).
This change ensures that the clean_state pass is run even if the
startwith pass is unspecified.
We also ensure the name of the startwith pass is always freed correctly.
As an example, before this change the following code would ICE when compiling
the function `foo_a`.
When compiled with
./aarch64-none-linux-gnu-gcc -O0 -S unspecified-pass-error.c -o test.s
```
int __RTL () badfoo ()
{
(function "badfoo"
(insn-chain
(block 2
(edge-from entry (flags "FALLTHRU"))
(cnote 3 [bb 2] NOTE_INSN_BASIC_BLOCK)
(cinsn 101 (set (reg:DI x19) (reg:DI x0)))
(cinsn 10 (use (reg/i:SI x19)))
(edge-to exit (flags "FALLTHRU"))
) ;; block 2
) ;; insn-chain
) ;; function "foo2"
}
int
foo_a ()
{
return 200;
}
```
Now it silently ignores the __RTL function and successfully compiles foo_a.
regtest done on aarch64
regtest done on x86_64
OK for trunk?
gcc/ChangeLog:
2019-11-18 Matthew Malcomson <matthew.malcomson@arm.com>
* run-rtl-passes.c (run_rtl_passes): Accept and handle empty
"initial_pass_name" argument -- by running "*clean_state" pass.
Also free the "initial_pass_name" when done.
gcc/c/ChangeLog:
2019-11-18 Matthew Malcomson <matthew.malcomson@arm.com>
* c-parser.c (c_parser_parse_rtl_body): Always call
run_rtl_passes, even if startwith pass is not provided.
gcc/testsuite/ChangeLog:
2019-11-18 Matthew Malcomson <matthew.malcomson@arm.com>
* gcc.dg/rtl/aarch64/unspecified-pass-error.c: New test.
From-SVN: r278393
Richard Biener [Mon, 18 Nov 2019 09:44:52 +0000 (09:44 +0000)]
re PR target/92462 ([arm32] -ftree-pre makes a variable to be wrongly hoisted out)
2019-11-18 Richard Biener <rguenther@suse.de>
PR rtl-optimization/92462
* alias.c (find_base_term): Restrict the look through ANDs.
(find_base_value): Likewise.
From-SVN: r278391
Christophe Lyon [Mon, 18 Nov 2019 09:20:18 +0000 (09:20 +0000)]
[testsuite][ARM] check_effective_target_arm_vfp_ok_nocache: Fix typo in option name
2019-11-18 Christophe Lyon <christophe.lyon@linaro.org>
* lib/target-supports.exp
(check_effective_target_arm_vfp_ok_nocache): Fix typo in option
name.
From-SVN: r278390
Georg-Johann Lay [Mon, 18 Nov 2019 08:19:08 +0000 (08:19 +0000)]
re PR target/92545 (avr: support ATmega devices from the 0-series)
PR target/92545
* config/avr/gen-avr-mmcu-specs.c (print_mcu)
[link_pm_base_address]: Symbol name is __RODATA_PM_OFFSET__.
From-SVN: r278389
Georg-Johann Lay [Mon, 18 Nov 2019 07:54:30 +0000 (07:54 +0000)]
re PR target/92545 (avr: support ATmega devices from the 0-series)
PR target/92545
* doc/avr-mmcu.texi: Regenerate.
From-SVN: r278388
Georg-Johann Lay [Mon, 18 Nov 2019 07:52:55 +0000 (07:52 +0000)]
Add support for AVR devices from the 0-series.
PR target/92545
* config/avr/avr-arch.h (avr_mcu_t) <flash_pm_offset>: New field.
* config/avr/avr-devices.c (avr_mcu_types): Adjust initializers.
* config/avr/avr-mcus.def (AVR_MCU): Add respective field.
* config/avr/specs.h (LINK_SPEC) <%(link_pm_base_address)>: Add.
* config/avr/gen-avr-mmcu-specs.c (print_mcu)
<*cpp, *cpp_mcu, *cpp_avrlibc, *link_pm_base_address>: Emit code
for spec definitions.
* doc/avr-mmcu.texi: Regenerate.
From-SVN: r278387
Hongtao Liu [Mon, 18 Nov 2019 02:22:55 +0000 (02:22 +0000)]
Split X86_TUNE_AVX128_OPTIMAL into X86_TUNE_AVX256_SPLIT_REGS
and X86_TUNE_AVX128_OPTIMAL.
Changelog
gcc/
PR target/92448
* config/i386/i386-expand.c (ix86_expand_set_or_cpymem):
Replace TARGET_AVX128_OPTIMAL with TARGET_AVX256_SPLIT_REGS.
* config/i386/i386-option.c (ix86_vec_cost): Ditto.
(ix86_reassociation_width): Ditto.
* config/i386/i386-options.c (ix86_option_override_internal):
Replace TARGET_AVX128_OPTIAML with
ix86_tune_features[X86_TUNE_AVX128_OPTIMAL]
* config/i386/i386.h (TARGET_AVX256_SPLIT_REGS): New macro.
(TARGET_AVX128_OPTIMAL): Deleted.
* config/i386/x86-tune.def (X86_TUNE_AVX256_SPLIT_REGS): New
DEF_TUNE.
From-SVN: r278385
Maciej W. Rozycki [Mon, 18 Nov 2019 00:33:37 +0000 (00:33 +0000)]
libgomp: Regenerate `testsuite/Makefile.in' for GCC_HEADER_STDINT removal
Commit r276389 ("configure.ac: Remove GCC_HEADER_STDINT(gstdint.h)") has
not regenerated `testsuite/Makefile.in'. Fix it.
libgomp/
* testsuite/Makefile.in: Regenerate.
From-SVN: r278384
Maciej W. Rozycki [Mon, 18 Nov 2019 00:21:45 +0000 (00:21 +0000)]
libgfortran: Regenerate `Makefile.in' for `runstatedir' removal
A change made with r271340 ("libfortran/90038: Use posix_spawn instead
of fork") accidentally brought the obsolete `runstatedir' setting back
in. Fix it.
libgfortran/
* Makefile.in: Regenerate.
From-SVN: r278383
GCC Administrator [Mon, 18 Nov 2019 00:16:13 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r278382
John David Anglin [Sun, 17 Nov 2019 23:11:52 +0000 (23:11 +0000)]
linux-atomic.c (__kernel_cmpxchg): Change argument 1 to volatile void *.
* config/pa/linux-atomic.c (__kernel_cmpxchg): Change argument 1 to
volatile void *. Remove trap check.
(__kernel_cmpxchg2): Likewise.
(FETCH_AND_OP_2): Adjust operand types.
(OP_AND_FETCH_2): Likewise.
(FETCH_AND_OP_WORD): Likewise.
(OP_AND_FETCH_WORD): Likewise.
(COMPARE_AND_SWAP_2): Likewise.
(__sync_val_compare_and_swap_4): Likewise.
(__sync_bool_compare_and_swap_4): Likewise.
(SYNC_LOCK_TEST_AND_SET_2): Likewise.
(__sync_lock_test_and_set_4): Likewise.
(SYNC_LOCK_RELEASE_1): Likewise. Use __kernel_cmpxchg2 for release.
(__sync_lock_release_4): Adjust operand types. Use __kernel_cmpxchg
for release.
(__sync_lock_release_8): Remove.
From-SVN: r278377
Jeff Law [Sun, 17 Nov 2019 16:31:32 +0000 (09:31 -0700)]
* gcc.dg/complex-6.c: Do not run dump scan tests for rx target.
From-SVN: r278376
Jakub Jelinek [Sun, 17 Nov 2019 06:12:01 +0000 (07:12 +0100)]
method.c (lookup_comparison_result): Use %qD instead of %<%T::%D%> to print the decl.
* method.c (lookup_comparison_result): Use %qD instead of %<%T::%D%>
to print the decl.
(lookup_comparison_category): Use %qD instead of %<std::%D%> to print
the decl.
* g++.dg/cpp2a/spaceship-err3.C: New test.
From-SVN: r278375
Edward Smith-Rowland [Sun, 17 Nov 2019 03:31:15 +0000 (03:31 +0000)]
Repair the <tuple> part of C++20 p1032 Misc constexpr bits.
2019-11-16 Edward Smith-Rowland <3dw4rd@verizon.net>
Repair the <tuple> part of C++20 p1032 Misc constexpr bits.
* include/bits/uses_allocator.h (__uses_alloc0::_Sink::operaror=)
(__use_alloc(const _Alloc&)) : Constexpr.
From-SVN: r278373
Jonathan Wakely [Sun, 17 Nov 2019 01:32:55 +0000 (01:32 +0000)]
libstdc++: add range constructor for std::string_view (P1391R4)
* include/std/string_view (basic_string_view(It, End)): Add range
constructor and deduction guide from P1391R4.
* testsuite/21_strings/basic_string_view/cons/char/range.cc: New test.
From-SVN: r278371
Jonathan Wakely [Sun, 17 Nov 2019 01:07:54 +0000 (01:07 +0000)]
libstdc++: Define C++20 range utilities and range factories
This adds another chunk of the <ranges> header.
The changes from P1456R1 (Move-only views) and P1862R1 (Range adaptors
for non-copyable iterators) are included, but not the changes from
P1870R1 (forwarding-range<T> is too subtle).
The tests for subrange and iota_view are poor and should be improved.
* include/bits/regex.h (match_results): Specialize __enable_view_impl.
* include/bits/stl_set.h (set): Likewise.
* include/bits/unordered_set.h (unordered_set, unordered_multiset):
Likewise.
* include/debug/multiset.h (__debug::multiset): Likewise.
* include/debug/set.h (__debug::set): Likewise.
* include/debug/unordered_set (__debug::unordered_set)
(__debug::unordered_multiset): Likewise.
* include/std/ranges (ranges::view, ranges::enable_view)
(ranges::view_interface, ranges::subrange, ranges::empty_view)
(ranges::single_view, ranges::views::single, ranges::iota_view)
(ranges::views::iota): Define for C++20.
* testsuite/std/ranges/empty_view.cc: New test.
* testsuite/std/ranges/iota_view.cc: New test.
* testsuite/std/ranges/single_view.cc: New test.
* testsuite/std/ranges/view.cc: New test.
From-SVN: r278370
GCC Administrator [Sun, 17 Nov 2019 00:16:14 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r278369
Segher Boessenkool [Sat, 16 Nov 2019 23:31:19 +0000 (00:31 +0100)]
rs6000: Allow mode GPR in cceq_{ior,rev}_compare
Also make it a parmeterized name: @cceq_{ior,rev}_compare_<mode>.
* config/rs6000/rs6000.md (cceq_ior_compare): Rename to...
(@cceq_ior_compare_<mode> for GPR): ... this. Allow GPR instead of
just SI.
(cceq_rev_compare): Rename to...
(@cceq_rev_compare_<mode> for GPR): ... this. Allow GPR instead of
just SI.
(define_split for <bd>tf_<mode>): Add SImode first argument to
gen_cceq_ior_compare.
From-SVN: r278366
Jonathan Wakely [Sat, 16 Nov 2019 22:00:23 +0000 (22:00 +0000)]
Revert r278363 "Start work on <ranges> header"
This was not meant to be on the branch I committed r278364 from, as it
is not ready to commit yet.
* include/std/ranges: Revert accidentally committed changes.
From-SVN: r278365
Jonathan Wakely [Sat, 16 Nov 2019 21:47:28 +0000 (21:47 +0000)]
libstdc++: Optimize std::jthread construction
This change avoids storing a copy of a stop_token object that isn't
needed and won't be passed to the callable object. This slightly reduces
memory usage when the callable doesn't use a stop_token. It also removes
indirection in the invocation of the callable in the new thread, as
there is no lambda and no additional calls to std::invoke.
It also adds some missing [[nodiscard]] attributes, and the non-member
swap overload for std::jthread.
* include/std/thread (jthread::jthread()): Use nostopstate constant.
(jthread::jthread(Callable&&, Args&&...)): Use helper function to
create std::thread instead of indirection through a lambda. Use
remove_cvref_t instead of decay_t.
(jthread::joinable(), jthread::get_id(), jthread::native_handle())
(jthread::hardware_concurrency()): Add nodiscard attribute.
(swap(jthread&. jthread&)): Define hidden friend.
(jthread::_S_create): New helper function for constructor.
From-SVN: r278364
Jonathan Wakely [Sat, 16 Nov 2019 21:47:22 +0000 (21:47 +0000)]
Start work on <ranges> header
From-SVN: r278363
Segher Boessenkool [Sat, 16 Nov 2019 19:32:12 +0000 (20:32 +0100)]
Delete common/config/powerpcspe
I missed this part in r266961. Various people have been editing it
since; I finally noticed.
* common/config/powerpcspe: Delete.
From-SVN: r278361
Jeff Law [Sat, 16 Nov 2019 17:14:14 +0000 (10:14 -0700)]
[PATCH] Fix slowness in demangler
* cp-demangle.c (d_print_init): Remove const from 4th param.
(cplus_demangle_fill_name): Initialize d->d_counting.
(cplus_demangle_fill_extended_operator): Likewise.
(cplus_demangle_fill_ctor): Likewise.
(cplus_demangle_fill_dtor): Likewise.
(d_make_empty): Likewise.
(d_count_templates_scopes): Remobe const from 3rd param,
Return on dc->d_counting > 1,
Increment dc->d_counting.
* cp-demint.c (cplus_demangle_fill_component): Initialize d->d_counting.
(cplus_demangle_fill_builtin_type): Likewise.
(cplus_demangle_fill_operator): Likewise.
* demangle.h (struct demangle_component): Add member
d_counting.
From-SVN: r278359
Eduard-Mihai Burtescu [Sat, 16 Nov 2019 15:32:50 +0000 (16:32 +0100)]
[PATCH] Refactor rust-demangle to be independent of C++ demangling.
* demangle.h (rust_demangle_callback): Add.
* cplus-dem.c (cplus_demangle): Use rust_demangle directly.
(rust_demangle): Remove.
* rust-demangle.c (is_prefixed_hash): Rename to is_legacy_prefixed_hash.
(parse_lower_hex_nibble): Rename to decode_lower_hex_nibble.
(parse_legacy_escape): Rename to decode_legacy_escape.
(rust_is_mangled): Remove.
(struct rust_demangler): Add.
(peek): Add.
(next): Add.
(struct rust_mangled_ident): Add.
(parse_ident): Add.
(rust_demangle_sym): Remove.
(print_str): Add.
(PRINT): Add.
(print_ident): Add.
(rust_demangle_callback): Add.
(struct str_buf): Add.
(str_buf_reserve): Add.
(str_buf_append): Add.
(str_buf_demangle_callback): Add.
(rust_demangle): Add.
* rust-demangle.h: Remove.
From-SVN: r278358
Miguel Saldivar [Sat, 16 Nov 2019 14:45:30 +0000 (14:45 +0000)]
* testsuite/demangle-expected: Fix test.
From-SVN: r278357
Richard Sandiford [Sat, 16 Nov 2019 13:31:28 +0000 (13:31 +0000)]
[AArch64] Robustify aarch64_wrffr
This patch uses distinct values for the FFR and FFRT outputs of
aarch64_wrffr, so that a following aarch64_copy_ffr_to_ffrt has
an effect. This is needed to avoid regressions with later patches.
The block comment at the head of the file already described
the pattern this way, and there was already an unspec for it.
Not sure what made me change it...
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/aarch64-sve.md (aarch64_wrffr): Wrap the FFRT
output in UNSPEC_WRFFR.
From-SVN: r278356
Richard Sandiford [Sat, 16 Nov 2019 11:43:31 +0000 (11:43 +0000)]
Use a single comparison for index-based alias checks
This patch rewrites the index-based alias checks to use conditions
of the form:
(unsigned T) (a - b + bias) <= limit
E.g. before the patch:
struct s { int x[100]; };
void
f1 (struct s *s1, int a, int b)
{
for (int i = 0; i < 32; ++i)
s1->x[i + a] += s1->x[i + b];
}
used:
add w3, w1, 3
cmp w3, w2
add w3, w2, 3
ccmp w1, w3, 0, ge
ble .L2
whereas after the patch it uses:
sub w3, w1, w2
add w3, w3, 3
cmp w3, 6
bls .L2
The patch also fixes the seg_len1 and seg_len2 negation for cases in
which seg_len is a "negative unsigned" value narrower than 64 bits,
like it is for 32-bit targets. Previously we'd end up with values
like 0xffffffff000000001 instead of 1.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-data-ref.c (create_intersect_range_checks_index): Rewrite
the index tests to have the form (unsigned T) (B - A + bias) <= limit.
gcc/testsuite/
* gcc.dg/vect/vect-alias-check-18.c: New test.
* gcc.dg/vect/vect-alias-check-19.c: Likewise.
* gcc.dg/vect/vect-alias-check-20.c: Likewise.
From-SVN: r278354
Richard Sandiford [Sat, 16 Nov 2019 11:42:53 +0000 (11:42 +0000)]
Print the type of alias check in a dump message
This patch prints a message to say how an alias check is being
implemented.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-data-ref.c (create_intersect_range_checks_index)
(create_intersect_range_checks): Print dump messages.
gcc/testsuite/
* gcc.dg/vect/vect-alias-check-1.c: Test for the type of alias check.
* gcc.dg/vect/vect-alias-check-8.c: Likewise.
* gcc.dg/vect/vect-alias-check-9.c: Likewise.
* gcc.dg/vect/vect-alias-check-10.c: Likewise.
* gcc.dg/vect/vect-alias-check-11.c: Likewise.
* gcc.dg/vect/vect-alias-check-12.c: Likewise.
* gcc.dg/vect/vect-alias-check-13.c: Likewise.
* gcc.dg/vect/vect-alias-check-14.c: Likewise.
* gcc.dg/vect/vect-alias-check-15.c: Likewise.
* gcc.dg/vect/vect-alias-check-16.c: Likewise.
* gcc.dg/vect/vect-alias-check-17.c: Likewise.
From-SVN: r278353
Richard Sandiford [Sat, 16 Nov 2019 11:42:02 +0000 (11:42 +0000)]
Dump the list of merged alias pairs
This patch dumps the final (merged) list of alias pairs. It also adds:
- WAW and RAW versions of vect-alias-check-8.c
- a "well-ordered" version of vect-alias-check-9.c (i.e. all reads
before any writes)
- a test with mixed steps in the same alias pair
I also tweaked the test value in vect-alias-check-9.c so that the
result was less likely to be accidentally correct if the alias
isn't honoured.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-data-ref.c (dump_alias_pair): New function.
(prune_runtime_alias_test_list): Use it to dump each merged alias pair.
gcc/testsuite/
* gcc.dg/vect/vect-alias-check-8.c: Test for the RAW flag.
* gcc.dg/vect/vect-alias-check-9.c: Test for the ARBITRARY flag.
(TEST_VALUE): Use a higher value for early iterations.
* gcc.dg/vect/vect-alias-check-14.c: New test.
* gcc.dg/vect/vect-alias-check-15.c: Likewise.
* gcc.dg/vect/vect-alias-check-16.c: Likewise.
* gcc.dg/vect/vect-alias-check-17.c: Likewise.
From-SVN: r278352
Richard Sandiford [Sat, 16 Nov 2019 11:41:16 +0000 (11:41 +0000)]
Record whether a dr_with_seg_len contains mixed steps
prune_runtime_alias_test_list can merge dr_with_seg_len_pair_ts that
have different steps for the first reference or different steps for the
second reference. This patch adds a flag to record that.
I don't know whether the change to create_intersect_range_checks_index
fixes anything in practice. It would have to be a corner case if so,
since at present we only merge two alias pairs if either the first or
the second references are identical and only the other references differ.
And the vectoriser uses VF-based segment lengths only if both references
in a pair have the same step. Either way, it still seems wrong to use
DR_STEP when it doesn't represent all checks that have been merged into
the pair.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-data-ref.h (DR_ALIAS_MIXED_STEPS): New flag.
* tree-data-ref.c (prune_runtime_alias_test_list): Set it when
merging data references with different steps.
(create_intersect_range_checks_index): Take a
dr_with_seg_len_pair_t instead of two dr_with_seg_lens.
Bail out if DR_ALIAS_MIXED_STEPS is set.
(create_intersect_range_checks): Take a dr_with_seg_len_pair_t
instead of two dr_with_seg_lens. Update call to
create_intersect_range_checks_index.
(create_runtime_alias_checks): Update call accordingly.
From-SVN: r278351
Richard Sandiford [Sat, 16 Nov 2019 11:40:22 +0000 (11:40 +0000)]
Add flags to dr_with_seg_len_pair_t
This patch adds a bunch of flags to dr_with_seg_len_pair_t,
for use by later patches. The update to tree-loop-distribution.c
is conservatively correct, but might be tweakable later.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-data-ref.h (DR_ALIAS_RAW, DR_ALIAS_WAR, DR_ALIAS_WAW)
(DR_ALIAS_ARBITRARY, DR_ALIAS_SWAPPED, DR_ALIAS_UNSWAPPED): New flags.
(dr_with_seg_len_pair_t::sequencing): New enum.
(dr_with_seg_len_pair_t::flags): New member variable.
(dr_with_seg_len_pair_t::dr_with_seg_len_pair_t): Take a sequencing
parameter and initialize the flags member variable.
* tree-loop-distribution.c (compute_alias_check_pairs): Update
call accordingly.
* tree-vect-data-refs.c (vect_prune_runtime_alias_test_list): Likewise.
Ensure the two data references in an alias pair are in statement
order, if there is a defined order.
* tree-data-ref.c (prune_runtime_alias_test_list): Use
DR_ALIAS_SWAPPED and DR_ALIAS_UNSWAPPED to record whether we've
swapped the references in a dr_with_seg_len_pair_t. OR together
the flags when merging two dr_with_seg_len_pair_ts. After merging,
try to restore the original dr_with_seg_len order, updating the
flags if that fails.
From-SVN: r278350
Richard Sandiford [Sat, 16 Nov 2019 11:35:56 +0000 (11:35 +0000)]
Delay swapping data refs in prune_runtime_alias_test_list
prune_runtime_alias_test_list swapped dr_as between two dr_with_seg_len
pairs before finally deciding whether to merge them. Bailing out later
would therefore leave the pairs in an incorrect state.
IMO a better fix would be to split this out into a subroutine that
produces a temporary dr_with_seg_len on success, rather than changing
an existing one in-place. It would then be easy to merge both the dr_as
and dr_bs if we wanted to, rather than requiring one of them to be equal.
But here I tried to do something that could be backported if necessary.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-data-ref.c (prune_runtime_alias_test_list): Delay
swapping the dr_as based on init values until we've decided
whether to merge them.
From-SVN: r278349
Richard Sandiford [Sat, 16 Nov 2019 11:35:08 +0000 (11:35 +0000)]
Move canonicalisation of dr_with_seg_len_pair_ts
The two users of tree-data-ref's runtime alias checks both canonicalise
the order of the dr_with_seg_lens in a pair before passing them to
prune_runtime_alias_test_list. It's more convenient for later patches
if prune_runtime_alias_test_list does that itself.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-data-ref.c (prune_runtime_alias_test_list): Sort the
two accesses in each dr_with_seg_len_pair_t before trying to
combine separate dr_with_seg_len_pair_ts.
* tree-loop-distribution.c (compute_alias_check_pairs): Don't do
that here.
* tree-vect-data-refs.c (vect_prune_runtime_alias_test_list): Likewise.
From-SVN: r278348
Richard Sandiford [Sat, 16 Nov 2019 11:30:46 +0000 (11:30 +0000)]
[AArch64] Add scatter stores for partial SVE modes
This patch adds support for scatter stores of partial vectors,
where the vector base or offset elements can be wider than the
elements being stored.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/aarch64-sve.md
(scatter_store<SVE_FULL_SD:mode><v_int_equiv>): Extend to...
(scatter_store<SVE_24:mode><v_int_container>): ...this.
(mask_scatter_store<SVE_FULL_S:mode><v_int_equiv>): Extend to...
(mask_scatter_store<SVE_4:mode><v_int_equiv>): ...this.
(mask_scatter_store<SVE_FULL_D:mode><v_int_equiv>): Extend to...
(mask_scatter_store<SVE_2:mode><v_int_equiv>): ...this.
(*mask_scatter_store<mode><v_int_container>_<su>xtw_unpacked): New
pattern.
(*mask_scatter_store<SVE_FULL_D:mode><v_int_equiv>_sxtw): Extend to...
(*mask_scatter_store<SVE_2:mode><v_int_equiv>_sxtw): ...this.
(*mask_scatter_store<SVE_FULL_D:mode><v_int_equiv>_uxtw): Extend to...
(*mask_scatter_store<SVE_2:mode><v_int_equiv>_uxtw): ...this.
gcc/testsuite/
* gcc.target/aarch64/sve/scatter_store_1.c (TEST_LOOP): Start at 0.
(TEST_ALL): Add tests for 8-bit and 16-bit elements.
* gcc.target/aarch64/sve/scatter_store_2.c: Update accordingly.
* gcc.target/aarch64/sve/scatter_store_3.c (TEST_LOOP): Start at 0.
(TEST_ALL): Add tests for 8-bit and 16-bit elements.
* gcc.target/aarch64/sve/scatter_store_4.c: Update accordingly.
* gcc.target/aarch64/sve/scatter_store_5.c (TEST_LOOP): Start at 0.
(TEST_ALL): Add tests for 8-bit, 16-bit and 32-bit elements.
* gcc.target/aarch64/sve/scatter_store_8.c: New test.
* gcc.target/aarch64/sve/scatter_store_9.c: Likewise.
From-SVN: r278347
Richard Sandiford [Sat, 16 Nov 2019 11:26:11 +0000 (11:26 +0000)]
[AArch64] Pattern-match SVE extending gather loads
This patch pattern-matches a partial gather load followed by a sign or
zero extension into an extending gather load. (The partial gather load
is already an extending load; we just don't rely on the upper bits of
the elements.)
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/iterators.md (SVE_2BHSI, SVE_2HSDI, SVE_4BHI)
(SVE_4HSI): New mode iterators.
(ANY_EXTEND2): New code iterator.
* config/aarch64/aarch64-sve.md
(@aarch64_gather_load_<ANY_EXTEND:optab><VNx4_WIDE:mode><VNx4_NARROW:mode>):
Extend to...
(@aarch64_gather_load_<ANY_EXTEND:optab><SVE_4HSI:mode><SVE_4BHI:mode>):
...this, handling extension to partial modes as well as full modes.
Describe the extension as a predicated rather than unpredicated
extension.
(@aarch64_gather_load_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>):
Likewise extend to...
(@aarch64_gather_load_<ANY_EXTEND:optab><SVE_2HSDI:mode><SVE_2BHSI:mode>):
...this, making the same adjustments.
(*aarch64_gather_load_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>_sxtw):
Likewise extend to...
(*aarch64_gather_load_<ANY_EXTEND:optab><SVE_2HSDI:mode><SVE_2BHSI:mode>_sxtw)
...this, making the same adjustments.
(*aarch64_gather_load_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>_uxtw):
Likewise extend to...
(*aarch64_gather_load_<ANY_EXTEND:optab><SVE_2HSDI:mode><SVE_2BHSI:mode>_uxtw)
...this, making the same adjustments.
(*aarch64_gather_load_<ANY_EXTEND:optab><SVE_2HSDI:mode><SVE_2BHSI:mode>_<ANY_EXTEND2:su>xtw_unpacked):
New pattern.
(*aarch64_ldff1_gather<mode>_sxtw): Canonicalize to a constant
extension predicate.
(@aarch64_ldff1_gather_<ANY_EXTEND:optab><VNx4_WIDE:mode><VNx4_NARROW:mode>)
(@aarch64_ldff1_gather_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>)
(*aarch64_ldff1_gather_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>_uxtw):
Describe the extension as a predicated rather than unpredicated
extension.
(*aarch64_ldff1_gather_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>_sxtw):
Likewise. Canonicalize to a constant extension predicate.
* config/aarch64/aarch64-sve-builtins-base.cc
(svld1_gather_extend_impl::expand): Add an extra predicate for
the extension.
(svldff1_gather_extend_impl::expand): Likewise.
gcc/testsuite/
* gcc.target/aarch64/sve/gather_load_extend_1.c: New test.
* gcc.target/aarch64/sve/gather_load_extend_2.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_3.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_4.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_5.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_6.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_7.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_8.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_9.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_10.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_11.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_12.c: Likewise.
From-SVN: r278346
Richard Sandiford [Sat, 16 Nov 2019 11:20:30 +0000 (11:20 +0000)]
[AArch64] Add gather loads for partial SVE modes
This patch adds support for gather loads of partial vectors,
where the vector base or offset elements can be wider than the
elements being loaded.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/iterators.md (SVE_24, SVE_2, SVE_4): New mode
iterators.
* config/aarch64/aarch64-sve.md
(gather_load<SVE_FULL_SD:mode><v_int_equiv>): Extend to...
(gather_load<SVE_24:mode><v_int_container>): ...this.
(mask_gather_load<SVE_FULL_S:mode><v_int_equiv>): Extend to...
(mask_gather_load<SVE_4:mode><v_int_container>): ...this.
(mask_gather_load<SVE_FULL_D:mode><v_int_equiv>): Extend to...
(mask_gather_load<SVE_2:mode><v_int_container>): ...this.
(*mask_gather_load<SVE_2:mode><v_int_container>_<su>xtw_unpacked):
New pattern.
(*mask_gather_load<SVE_FULL_D:mode><v_int_equiv>_sxtw): Extend to...
(*mask_gather_load<SVE_2:mode><v_int_equiv>_sxtw): ...this.
Allow the nominal extension predicate to be different from the
load predicate.
(*mask_gather_load<SVE_FULL_D:mode><v_int_equiv>_uxtw): Extend to...
(*mask_gather_load<SVE_2:mode><v_int_equiv>_uxtw): ...this.
gcc/testsuite/
* gcc.target/aarch64/sve/gather_load_1.c (TEST_LOOP): Start at 0.
(TEST_ALL): Add tests for 8-bit and 16-bit elements.
* gcc.target/aarch64/sve/gather_load_2.c: Update accordingly.
* gcc.target/aarch64/sve/gather_load_3.c (TEST_LOOP): Start at 0.
(TEST_ALL): Add tests for 8-bit and 16-bit elements.
* gcc.target/aarch64/sve/gather_load_4.c: Update accordingly.
* gcc.target/aarch64/sve/gather_load_5.c (TEST_LOOP): Start at 0.
(TEST_ALL): Add tests for 8-bit, 16-bit and 32-bit elements.
* gcc.target/aarch64/sve/gather_load_6.c: Add
--param aarch64-sve-compare-costs=0.
(TEST_LOOP): Start at 0.
* gcc.target/aarch64/sve/gather_load_7.c: Add
--param aarch64-sve-compare-costs=0.
* gcc.target/aarch64/sve/gather_load_8.c: New test.
* gcc.target/aarch64/sve/gather_load_9.c: Likewise.
* gcc.target/aarch64/sve/mask_gather_load_6.c: Add
--param aarch64-sve-compare-costs=0.
From-SVN: r278345
Richard Sandiford [Sat, 16 Nov 2019 11:14:51 +0000 (11:14 +0000)]
[AArch64] Add truncation for partial SVE modes
This patch adds support for "truncating" to a partial SVE vector from
either a full SVE vector or a wider partial vector. This truncation is
actually a no-op and so should have zero cost in the vector cost model.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/aarch64-sve.md
(trunc<SVE_HSDI:mode><SVE_PARTIAL_I:mode>2): New pattern.
* config/aarch64/aarch64.c (aarch64_integer_truncation_p): New
function.
(aarch64_sve_adjust_stmt_cost): Call it.
gcc/testsuite/
* gcc.target/aarch64/sve/mask_struct_load_1.c: Add
--param aarch64-sve-compare-costs=0.
* gcc.target/aarch64/sve/mask_struct_load_2.c: Likewise.
* gcc.target/aarch64/sve/mask_struct_load_3.c: Likewise.
* gcc.target/aarch64/sve/mask_struct_load_4.c: Likewise.
* gcc.target/aarch64/sve/mask_struct_load_5.c: Likewise.
* gcc.target/aarch64/sve/pack_1.c: Likewise.
* gcc.target/aarch64/sve/truncate_1.c: New test.
From-SVN: r278344
Richard Sandiford [Sat, 16 Nov 2019 11:11:47 +0000 (11:11 +0000)]
[AArch64] Pattern-match SVE extending loads
This patch pattern-matches a partial SVE load followed by a sign or zero
extension into an extending load. (The partial load is already an
extending load; we just don't rely on the upper bits of the elements.)
Nothing yet uses the extra LDFF1 and LDNF1 combinations, but it seemed
more consistent to provide them, since I needed to update the pattern
to use a predicated extension anyway.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/aarch64-sve.md
(@aarch64_load_<ANY_EXTEND:optab><VNx8_WIDE:mode><VNx8_NARROW:mode>):
(@aarch64_load_<ANY_EXTEND:optab><VNx4_WIDE:mode><VNx4_NARROW:mode>)
(@aarch64_load_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>):
Combine into...
(@aarch64_load_<ANY_EXTEND:optab><SVE_HSDI:mode><SVE_PARTIAL_I:mode>):
...this new pattern, handling extension to partial modes as well
as full modes. Describe the extension as a predicated rather than
unpredicated extension.
(@aarch64_ld<fn>f1_<ANY_EXTEND:optab><VNx8_WIDE:mode><VNx8_NARROW:mode>)
(@aarch64_ld<fn>f1_<ANY_EXTEND:optab><VNx4_WIDE:mode><VNx4_NARROW:mode>)
(@aarch64_ld<fn>f1_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>):
Combine into...
(@aarch64_ld<fn>f1_<ANY_EXTEND:optab><SVE_HSDI:mode><SVE_PARTIAL_I:mode>):
...this new pattern, handling extension to partial modes as well
as full modes. Describe the extension as a predicated rather than
unpredicated extension.
* config/aarch64/aarch64-sve-builtins.cc
(function_expander::use_contiguous_load_insn): Add an extra
predicate for extending loads.
* config/aarch64/aarch64.c (aarch64_extending_load_p): New function.
(aarch64_sve_adjust_stmt_cost): Likewise.
(aarch64_add_stmt_cost): Use aarch64_sve_adjust_stmt_cost to adjust
the cost of SVE vector stmts.
gcc/testsuite/
* gcc.target/aarch64/sve/load_extend_1.c: New test.
* gcc.target/aarch64/sve/load_extend_2.c: Likewise.
* gcc.target/aarch64/sve/load_extend_3.c: Likewise.
* gcc.target/aarch64/sve/load_extend_4.c: Likewise.
* gcc.target/aarch64/sve/load_extend_5.c: Likewise.
* gcc.target/aarch64/sve/load_extend_6.c: Likewise.
* gcc.target/aarch64/sve/load_extend_7.c: Likewise.
* gcc.target/aarch64/sve/load_extend_8.c: Likewise.
* gcc.target/aarch64/sve/load_extend_9.c: Likewise.
* gcc.target/aarch64/sve/load_extend_10.c: Likewise.
* gcc.target/aarch64/sve/reduc_4.c: Add
--param aarch64-sve-compare-costs=0.
From-SVN: r278343
Richard Sandiford [Sat, 16 Nov 2019 11:07:23 +0000 (11:07 +0000)]
[AArch64] Add sign and zero extension for partial SVE modes
This patch adds support for extending from partial SVE modes
to both full vector modes and wider partial modes.
Some tests now need --param aarch64-sve-compare-costs=0 to force
the original full-vector code.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/iterators.md (SVE_HSDI): New mode iterator.
(narrower_mask): Handle VNx4HI, VNx2HI and VNx2SI.
* config/aarch64/aarch64-sve.md
(<ANY_EXTEND:optab><SVE_PARTIAL_I:mode><SVE_HSDI:mode>2): New pattern.
(*<ANY_EXTEND:optab><SVE_PARTIAL_I:mode><SVE_HSDI:mode>2): Likewise.
(@aarch64_pred_sxt<SVE_FULL_HSDI:mode><SVE_PARTIAL_I:mode>): Update
comment. Avoid new narrower_mask ambiguity.
(@aarch64_cond_sxt<SVE_FULL_HSDI:mode><SVE_PARTIAL_I:mode>): Likewise.
(*cond_uxt<mode>_2): Update comment.
(*cond_uxt<mode>_any): Likewise.
gcc/testsuite/
* gcc.target/aarch64/sve/cost_model_1.c: Expect the loop to be
vectorized with bytes stored in 32-bit containers.
* gcc.target/aarch64/sve/extend_1.c: New test.
* gcc.target/aarch64/sve/extend_2.c: New test.
* gcc.target/aarch64/sve/extend_3.c: New test.
* gcc.target/aarch64/sve/extend_4.c: New test.
* gcc.target/aarch64/sve/load_const_offset_3.c: Add
--param aarch64-sve-compare-costs=0.
* gcc.target/aarch64/sve/mask_struct_store_1.c: Likewise.
* gcc.target/aarch64/sve/mask_struct_store_1_run.c: Likewise.
* gcc.target/aarch64/sve/mask_struct_store_2.c: Likewise.
* gcc.target/aarch64/sve/mask_struct_store_2_run.c: Likewise.
* gcc.target/aarch64/sve/unpack_unsigned_1.c: Likewise.
* gcc.target/aarch64/sve/unpack_unsigned_1_run.c: Likewise.
From-SVN: r278342
Richard Sandiford [Sat, 16 Nov 2019 11:02:09 +0000 (11:02 +0000)]
[AArch64] Add autovec support for partial SVE vectors
This patch adds the bare minimum needed to support autovectorisation of
partial SVE vectors, namely moves and integer addition. Later patches
add more interesting cases.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/aarch64-modes.def: Define partial SVE vector
float modes.
* config/aarch64/aarch64-protos.h (aarch64_sve_pred_mode): New
function.
* config/aarch64/aarch64.c (aarch64_classify_vector_mode): Handle the
new vector float modes.
(aarch64_sve_container_bits): New function.
(aarch64_sve_pred_mode): Likewise.
(aarch64_get_mask_mode): Use it.
(aarch64_sve_element_int_mode): Handle structure modes and partial
modes.
(aarch64_sve_container_int_mode): New function.
(aarch64_vectorize_related_mode): Return SVE modes when given
SVE modes. Handle partial modes, taking the preferred number
of units from the size of the given mode.
(aarch64_hard_regno_mode_ok): Allow partial modes to be stored
in registers.
(aarch64_expand_sve_ld1rq): Use the mode form of aarch64_sve_pred_mode.
(aarch64_expand_sve_const_vector): Handle partial SVE vectors.
(aarch64_split_sve_subreg_move): Use the mode form of
aarch64_sve_pred_mode.
(aarch64_secondary_reload): Handle partial modes in the same way
as full big-endian vectors.
(aarch64_vector_mode_supported_p): Allow partial SVE vectors.
(aarch64_autovectorize_vector_modes): Try unpacked SVE vectors,
merging with the Advanced SIMD modes. If two modes have the
same size, try the Advanced SIMD mode first.
(aarch64_simd_valid_immediate): Use the container rather than
the element mode for INDEX constants.
(aarch64_simd_vector_alignment): Make the alignment of partial
SVE vector modes the same as their minimum size.
(aarch64_evpc_sel): Use the mode form of aarch64_sve_pred_mode.
* config/aarch64/aarch64-sve.md (mov<SVE_FULL:mode>): Extend to...
(mov<SVE_ALL:mode>): ...this.
(movmisalign<SVE_FULL:mode>): Extend to...
(movmisalign<SVE_ALL:mode>): ...this.
(*aarch64_sve_mov<mode>_le): Rename to...
(*aarch64_sve_mov<mode>_ldr_str): ...this.
(*aarch64_sve_mov<SVE_FULL:mode>_be): Rename and extend to...
(*aarch64_sve_mov<SVE_ALL:mode>_no_ldr_str): ...this. Handle
partial modes regardless of endianness.
(aarch64_sve_reload_be): Rename to...
(aarch64_sve_reload_mem): ...this and enable for little-endian.
Use aarch64_sve_pred_mode to get the appropriate predicate mode.
(@aarch64_pred_mov<SVE_FULL:mode>): Extend to...
(@aarch64_pred_mov<SVE_ALL:mode>): ...this.
(*aarch64_sve_mov<SVE_FULL:mode>_subreg_be): Extend to...
(*aarch64_sve_mov<SVE_ALL:mode>_subreg_be): ...this.
(@aarch64_sve_reinterpret<SVE_FULL:mode>): Extend to...
(@aarch64_sve_reinterpret<SVE_ALL:mode>): ...this.
(*aarch64_sve_reinterpret<SVE_FULL:mode>): Extend to...
(*aarch64_sve_reinterpret<SVE_ALL:mode>): ...this.
(maskload<SVE_FULL:mode><vpred>): Extend to...
(maskload<SVE_ALL:mode><vpred>): ...this.
(maskstore<SVE_FULL:mode><vpred>): Extend to...
(maskstore<SVE_ALL:mode><vpred>): ...this.
(vec_duplicate<SVE_FULL:mode>): Extend to...
(vec_duplicate<SVE_ALL:mode>): ...this.
(*vec_duplicate<SVE_FULL:mode>_reg): Extend to...
(*vec_duplicate<SVE_ALL:mode>_reg): ...this.
(sve_ld1r<SVE_FULL:mode>): Extend to...
(sve_ld1r<SVE_ALL:mode>): ...this.
(vec_series<SVE_FULL_I:mode>): Extend to...
(vec_series<SVE_I:mode>): ...this.
(*vec_series<SVE_FULL_I:mode>_plus): Extend to...
(*vec_series<SVE_I:mode>_plus): ...this.
(@aarch64_pred_sxt<SVE_FULL_HSDI:mode><SVE_PARTIAL_I:mode>): Avoid
new VPRED ambiguity.
(@aarch64_cond_sxt<SVE_FULL_HSDI:mode><SVE_PARTIAL_I:mode>): Likewise.
(add<SVE_FULL_I:mode>3): Extend to...
(add<SVE_I:mode>3): ...this.
* config/aarch64/iterators.md (SVE_ALL, SVE_I): New mode iterators.
(Vetype, Vesize, VEL, Vel, vwcore): Handle partial SVE vector modes.
(VPRED, vpred): Likewise.
(Vctype): New iterator.
(vw): Remove SVE modes.
gcc/testsuite/
* gcc.target/aarch64/sve/mixed_size_1.c: New test.
* gcc.target/aarch64/sve/mixed_size_2.c: Likewise.
* gcc.target/aarch64/sve/mixed_size_3.c: Likewise.
* gcc.target/aarch64/sve/mixed_size_4.c: Likewise.
* gcc.target/aarch64/sve/mixed_size_5.c: Likewise.
From-SVN: r278341
Richard Sandiford [Sat, 16 Nov 2019 10:57:55 +0000 (10:57 +0000)]
[AArch64] Tweak gcc.target/aarch64/sve/clastb_8.c
clastb_8.c was using scan-tree-dump-times to check for fully-masked
loops, which made it sensitive to the number of times we try to
vectorize.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/testsuite/
* gcc.target/aarch64/sve/clastb_8.c: Use assembly tests to
check for fully-masked loops.
From-SVN: r278340
Richard Sandiford [Sat, 16 Nov 2019 10:55:40 +0000 (10:55 +0000)]
[AArch64] Replace SVE_PARTIAL with SVE_PARTIAL_I
Another renaming, this time to make way for partial/unpacked
float modes.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/iterators.md (SVE_PARTIAL): Rename to...
(SVE_PARTIAL_I): ...this.
* config/aarch64/aarch64-sve.md: Apply the above renaming throughout.
From-SVN: r278339
Richard Sandiford [Sat, 16 Nov 2019 10:50:42 +0000 (10:50 +0000)]
[AArch64] Add "FULL" to SVE mode iterator names
An upcoming patch will make more use of partial/unpacked SVE vectors.
We then need a distinction between mode iterators that include partial
modes and those that only include "full" modes. This patch prepares
for that by adding "FULL" to the names of iterators that only select
full modes. There should be no change in behaviour.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/iterators.md (SVE_ALL): Rename to...
(SVE_FULL): ...this.
(SVE_I): Rename to...
(SVE_FULL_I): ...this.
(SVE_F): Rename to...
(SVE_FULL_F): ...this.
(SVE_BHSI): Rename to...
(SVE_FULL_BHSI): ...this.
(SVE_HSD): Rename to...
(SVE_FULL_HSD): ...this.
(SVE_HSDI): Rename to...
(SVE_FULL_HSDI): ...this.
(SVE_HSF): Rename to...
(SVE_FULL_HSF): ...this.
(SVE_SD): Rename to...
(SVE_FULL_SD): ...this.
(SVE_SDI): Rename to...
(SVE_FULL_SDI): ...this.
(SVE_SDF): Rename to...
(SVE_FULL_SDF): ...this.
(SVE_S): Rename to...
(SVE_FULL_S): ...this.
(SVE_D): Rename to...
(SVE_FULL_D): ...this.
* config/aarch64/aarch64-sve.md: Apply the above renaming throughout.
* config/aarch64/aarch64-sve2.md: Likewise.
From-SVN: r278338
Richard Sandiford [Sat, 16 Nov 2019 10:43:52 +0000 (10:43 +0000)]
[AArch64] Enable VECT_COMPARE_COSTS by default for SVE
This patch enables VECT_COMPARE_COSTS by default for SVE, both so
that we can compare SVE against Advanced SIMD and so that (with future
patches) we can compare multiple SVE vectorisation approaches against
each other. It also adds a target-specific --param to control this.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/aarch64.opt (--param=aarch64-sve-compare-costs):
New option.
* doc/invoke.texi: Document it.
* config/aarch64/aarch64.c (aarch64_autovectorize_vector_modes):
By default, return VECT_COMPARE_COSTS for SVE.
gcc/testsuite/
* gcc.target/aarch64/sve/reduc_3.c: Split multi-vector cases out
into...
* gcc.target/aarch64/sve/reduc_3_costly.c: ...this new test,
passing -fno-vect-cost-model for them.
* gcc.target/aarch64/sve/slp_6.c: Add -fno-vect-cost-model.
* gcc.target/aarch64/sve/slp_7.c,
* gcc.target/aarch64/sve/slp_7_run.c: Split multi-vector cases out
into...
* gcc.target/aarch64/sve/slp_7_costly.c,
* gcc.target/aarch64/sve/slp_7_costly_run.c: ...these new tests,
passing -fno-vect-cost-model for them.
* gcc.target/aarch64/sve/while_7.c: Add -fno-vect-cost-model.
* gcc.target/aarch64/sve/while_9.c: Likewise.
From-SVN: r278337
Richard Sandiford [Sat, 16 Nov 2019 10:40:23 +0000 (10:40 +0000)]
Optionally pick the cheapest loop_vec_info
This patch adds a mode in which the vectoriser tries each available
base vector mode and picks the one with the lowest cost. The new
behaviour is selected by autovectorize_vector_modes.
The patch keeps the current behaviour of preferring a VF of
loop->simdlen over any larger or smaller VF, regardless of costs
or target preferences.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* target.h (VECT_COMPARE_COSTS): New constant.
* target.def (autovectorize_vector_modes): Return a bitmask of flags.
* doc/tm.texi: Regenerate.
* targhooks.h (default_autovectorize_vector_modes): Update accordingly.
* targhooks.c (default_autovectorize_vector_modes): Likewise.
* config/aarch64/aarch64.c (aarch64_autovectorize_vector_modes):
Likewise.
* config/arc/arc.c (arc_autovectorize_vector_modes): Likewise.
* config/arm/arm.c (arm_autovectorize_vector_modes): Likewise.
* config/i386/i386.c (ix86_autovectorize_vector_modes): Likewise.
* config/mips/mips.c (mips_autovectorize_vector_modes): Likewise.
* tree-vectorizer.h (_loop_vec_info::vec_outside_cost)
(_loop_vec_info::vec_inside_cost): New member variables.
* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Initialize them.
(vect_better_loop_vinfo_p, vect_joust_loop_vinfos): New functions.
(vect_analyze_loop): When autovectorize_vector_modes returns
VECT_COMPARE_COSTS, try vectorizing the loop with each available
vector mode and picking the one with the lowest cost.
(vect_estimate_min_profitable_iters): Record the computed costs
in the loop_vec_info.
From-SVN: r278336
Richard Sandiford [Sat, 16 Nov 2019 10:36:20 +0000 (10:36 +0000)]
Extend can_duplicate_and_interleave_p to mixed-size vectors
This patch makes can_duplicate_and_interleave_p cope with mixtures of
vector sizes, by using queries based on get_vectype_for_scalar_type
instead of directly querying GET_MODE_SIZE (vinfo->vector_mode).
int_mode_for_size is now the first check we do for a candidate mode,
so it seemed better to restrict it to MAX_FIXED_MODE_SIZE. This avoids
unnecessary work and avoids trying to create scalar types that the
target might not support.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (can_duplicate_and_interleave_p): Take an
element type rather than an element mode.
* tree-vect-slp.c (can_duplicate_and_interleave_p): Likewise.
Use get_vectype_for_scalar_type to query the natural types
for a given element type rather than basing everything on
GET_MODE_SIZE (vinfo->vector_mode). Limit int_mode_for_size
query to MAX_FIXED_MODE_SIZE.
(duplicate_and_interleave): Update call accordingly.
* tree-vect-loop.c (vectorizable_reduction): Likewise.
From-SVN: r278335
Richard Sandiford [Sat, 16 Nov 2019 10:29:31 +0000 (10:29 +0000)]
Apply maximum nunits for BB SLP
The BB vectoriser picked vector types in the same way as the loop
vectoriser: it picked a vector mode/size for the region and then
based all the vector types off that choice. This meant we could
end up trying to use vector types that had too many elements for
the group size.
The main part of this patch is therefore about passing the SLP
group size down to routines like get_vectype_for_scalar_type and
ensuring that each vector type in the SLP tree is chosen wrt the
group size. That part in itself is pretty easy and mechanical.
The main warts are:
(1) We normally pick a STMT_VINFO_VECTYPE for data references at an
early stage (vect_analyze_data_refs). However, nothing in the
BB vectoriser relied on this, or on the min_vf calculated from it.
I couldn't see anything other than vect_recog_bool_pattern that
tried to access the vector type before the SLP tree is built.
(2) It's possible for the same statement to be used in groups of
different sizes. Taking the group size into account meant that
we could try to pick different vector types for the same statement.
This problem should go away with the move to doing everything on
SLP trees, where presumably we would attach the vector type to the
SLP node rather than the stmt_vec_info. Until then, the patch just
uses a first-come, first-served approach.
(3) A similar problem exists for grouped data references, where
different statements in the same dataref group could be used
in SLP nodes that have different group sizes. The patch copes
with that by making sure that all vector types in a dataref
group remain consistent.
The patch means that:
void
f (int *x, short *y)
{
x[0] += y[0];
x[1] += y[1];
x[2] += y[2];
x[3] += y[3];
}
now produces:
ldr q0, [x0]
ldr d1, [x1]
saddw v0.4s, v0.4s, v1.4h
str q0, [x0]
ret
instead of:
ldrsh w2, [x1]
ldrsh w3, [x1, 2]
fmov s0, w2
ldrsh w2, [x1, 4]
ldrsh w1, [x1, 6]
ins v0.s[1], w3
ldr q1, [x0]
ins v0.s[2], w2
ins v0.s[3], w1
add v0.4s, v0.4s, v1.4s
str q0, [x0]
ret
Unfortunately it also means we start to vectorise
gcc.target/i386/pr84101.c for -m32. That seems like a target
cost issue though; see PR92265 for details.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (vect_get_vector_types_for_stmt): Take an
optional maximum nunits.
(get_vectype_for_scalar_type): Likewise. Also declare a form that
takes an slp_tree.
(get_mask_type_for_scalar_type): Take an optional slp_tree.
(vect_get_mask_type_for_stmt): Likewise.
* tree-vect-data-refs.c (vect_analyze_data_refs): Don't store
the vector type in STMT_VINFO_VECTYPE for BB vectorization.
* tree-vect-patterns.c (vect_recog_bool_pattern): Use
vect_get_vector_types_for_stmt instead of STMT_VINFO_VECTYPE
to get an assumed vector type for data references.
* tree-vect-slp.c (vect_update_shared_vectype): New function.
(vect_update_all_shared_vectypes): Likewise.
(vect_build_slp_tree_1): Pass the group size to
vect_get_vector_types_for_stmt. Use vect_update_shared_vectype
for BB vectorization.
(vect_build_slp_tree_2): Call vect_update_all_shared_vectypes
before building the vectof from scalars.
(vect_analyze_slp_instance): Pass the group size to
get_vectype_for_scalar_type.
(vect_slp_analyze_node_operations_1): Don't recompute the vector
types for BB vectorization here; just handle the case in which
we deferred the choice for booleans.
(vect_get_constant_vectors): Pass the slp_tree to
get_vectype_for_scalar_type.
* tree-vect-stmts.c (vect_prologue_cost_for_slp_op): Likewise.
(vectorizable_call): Likewise.
(vectorizable_simd_clone_call): Likewise.
(vectorizable_conversion): Likewise.
(vectorizable_shift): Likewise.
(vectorizable_operation): Likewise.
(vectorizable_comparison): Likewise.
(vect_is_simple_cond): Take the slp_tree as argument and
pass it to get_vectype_for_scalar_type.
(vectorizable_condition): Update call accordingly.
(get_vectype_for_scalar_type): Take a group_size argument.
For BB vectorization, limit the the vector to that number
of elements. Also define an overload that takes an slp_tree.
(get_mask_type_for_scalar_type): Add an slp_tree argument and
pass it to get_vectype_for_scalar_type.
(vect_get_vector_types_for_stmt): Add a group_size argument
and pass it to get_vectype_for_scalar_type. Don't use the
cached vector type for BB vectorization if a group size is given.
Handle data references in that case.
(vect_get_mask_type_for_stmt): Take an slp_tree argument and
pass it to get_mask_type_for_scalar_type.
gcc/testsuite/
* gcc.dg/vect/bb-slp-4.c: Expect the block to be vectorized
with -fno-vect-cost-model.
* gcc.dg/vect/bb-slp-bool-1.c: New test.
* gcc.target/aarch64/vect_mixed_sizes_14.c: Likewise.
* gcc.target/i386/pr84101.c: XFAIL for -m32.
From-SVN: r278334
Jan Hubicka [Sat, 16 Nov 2019 09:51:09 +0000 (10:51 +0100)]
Fix nonspec_time when there is no cached value.
* ipa-inline.h (do_estimate_edge_time): Add nonspec_time
parameter.
(estimate_edge_time): Use it.
* ipa-inline-analysis.c (do_estimate_edge_time): Add
ret_nonspec_time parameter.
From-SVN: r278333
Edward Smith-Rowland [Sat, 16 Nov 2019 03:16:35 +0000 (03:16 +0000)]
Implement the <tuple> part of C++20 p1032 Misc constexpr bits.
2019-11-15 Edward Smith-Rowland <3dw4rd@verizon.net>
Implement the <tuple> part of C++20 p1032 Misc constexpr bits.
* include/std/tuple (_Head_base, _Tuple_impl(allocator_arg_t,...)
(_M_assign, tuple(allocator_arg_t,...), _Inherited, operator=, _M_swap)
(swap, pair(piecewise_construct_t,): Constexpr.
* (__uses_alloc0::_Sink::operator=, __uses_alloc_t): Constexpr.
* testsuite/20_util/tuple/cons/constexpr_allocator_arg_t.cc: New test.
* testsuite/20_util/tuple/constexpr_swap.cc : New test.
* testsuite/20_util/uses_allocator/69293_neg.cc: Extra error for C++20.
* testsuite/20_util/uses_allocator/cons_neg.cc: : Extra error for C++20.
From-SVN: r278331
GCC Administrator [Sat, 16 Nov 2019 00:16:21 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r278328
Jonathan Wakely [Fri, 15 Nov 2019 23:44:47 +0000 (23:44 +0000)]
libstdc++: Fix <stop_token> and improve tests
* include/std/stop_token: Reduce header dependencies by including
internal headers.
(stop_token::swap(stop_token&), swap(stop_token&, stop_token&)):
Define.
(operator!=(const stop_token&, const stop_token&)): Fix return value.
(stop_token::_Stop_cb::_Stop_cb(Cb&&)): Use std::forward instead of
(stop_token::_Stop_state_t) [_GLIBCXX_HAS_GTHREADS]: Use lock_guard
instead of unique_lock.
[!_GLIBCXX_HAS_GTHREADS]: Do not use mutex.
(stop_token::stop_token(_Stop_state)): Change parameter to lvalue
reference.
(stop_source): Remove unnecessary using-declarations for names only
used once.
(swap(stop_source&, stop_source&)): Define.
(stop_callback(const stop_token&, _Cb&&))
(stop_callback(stop_token&&, _Cb&&)): Replace lambdas with a named
function. Use std::forward instead of std::move. Run callbacks if a
stop request has already been made.
(stop_source::_M_execute()): Remove.
(stop_source::_S_execute(_Stop_cb*)): Define.
* include/std/version (__cpp_lib_jthread): Define conditionally.
* testsuite/30_threads/stop_token/stop_callback.cc: New test.
* testsuite/30_threads/stop_token/stop_source.cc: New test.
* testsuite/30_threads/stop_token/stop_token.cc: Enable test for
immediate execution of callback.
From-SVN: r278325
Joseph Myers [Fri, 15 Nov 2019 23:22:41 +0000 (23:22 +0000)]
Diagnose duplicate C2x standard attributes.
For each of the attributes currently included in C2x, it has a
constraint that the attribute shall appear at most once in each
attribute list (attribute-list being what appear between a single [[
and ]]).
This patch implements that check. As the corresponding check in the
C++ front end (cp_parser_check_std_attribute) makes violations into
errors, I made them into errors, with the same wording, for C as well.
There is an existing check in the case of the fallthrough attribute,
with a warning rather than an error, in attribute_fallthrough_p. That
is more general, as it also covers __attribute__ ((fallthrough)) and
the case of [[fallthrough]] [[fallthrough]] (multiple attribute-lists
in a single attribute-specifier-sequence), which is not a constraint
violation. To avoid some [[fallthrough, fallthrough]] being diagnosed
twice, the check I added avoids adding duplicate attributes to the
list.
Bootstrapped with no regressions on x86_64-pc-linux-gnu.
gcc/c:
* c-parser.c (c_parser_std_attribute_specifier): Diagnose
duplicate standard attributes.
gcc/testsuite:
* gcc.dg/c2x-attr-deprecated-4.c, gcc.dg/c2x-attr-fallthrough-4.c,
gcc.dg/c2x-attr-maybe_unused-4.c: New tests.
From-SVN: r278324
Paolo Carlini [Fri, 15 Nov 2019 22:56:33 +0000 (22:56 +0000)]
typeck.c (cp_truthvalue_conversion): Add tsubst_flags_t parameter and use it in calls...
/cp
2019-11-15 Paolo Carlini <paolo.carlini@oracle.com>
* typeck.c (cp_truthvalue_conversion): Add tsubst_flags_t parameter
and use it in calls; also pass the location_t of the expression to
cp_build_binary_op and c_common_truthvalue_conversion.
* rtti.c (build_dynamic_cast_1): Adjust call.
* cvt.c (ocp_convert): Likewise.
* cp-gimplify.c (cp_fold): Likewise.
* cp-tree.h (cp_truthvalue_conversion): Update declaration.
/testsuite
2019-11-15 Paolo Carlini <paolo.carlini@oracle.com>
* g++.dg/warn/Walways-true-1.C: Check locations too.
* g++.dg/warn/Walways-true-2.C: Likewise.
* g++.dg/warn/Walways-true-3.C: Likewise.
* g++.dg/warn/Waddress-1.C: Check additional location.
From-SVN: r278320
Edward Smith-Rowland [Fri, 15 Nov 2019 21:27:49 +0000 (21:27 +0000)]
Forgot to change teh date range.
From-SVN: r278318
Edward Smith-Rowland [Fri, 15 Nov 2019 21:26:25 +0000 (21:26 +0000)]
Implement the default_searcher part of C++20 p1032 Misc constexpr bits.
2019-11-15 Edward Smith-Rowland <3dw4rd@verizon.net>
Implement the default_searcher part of C++20 p1032 Misc constexpr bits.
* include/std/functional
(default_searcher, default_searcher::operator()): Constexpr.
* testsuite/20_util/function_objects/constexpr_searcher.cc: New.
From-SVN: r278317
Ian Lance Taylor [Fri, 15 Nov 2019 21:14:29 +0000 (21:14 +0000)]
testmain.exp: link against GOLIBS
Patch by Maciej W. Rozycki.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/207458
From-SVN: r278316
Jonathan Wakely [Fri, 15 Nov 2019 19:58:27 +0000 (19:58 +0000)]
libstdc++: Implement LWG 3149 for std::default_constructible
The change approved in Belfast did not actually rename the concept from
std::default_constructible to std::default_initializable, even though
that was intended. That is expected to be done soon as a separate issue,
so I'm implementing that now too.
* include/bits/iterator_concepts.h (weakly_incrementable): Adjust.
* include/std/concepts (default_constructible): Rename to
default_initializable and require default-list-initialization and
default-initialization to be valid (LWG 3149).
(semiregular): Adjust to new name.
* testsuite/std/concepts/concepts.lang/concept.defaultconstructible/
1.cc: Rename directory to concept.defaultinitializable and adjust to
new name.
* testsuite/std/concepts/concepts.lang/concept.defaultinitializable/
lwg3149.cc: New test.
* testsuite/util/testsuite_iterators.h (test_range): Adjust.
From-SVN: r278314
Jonathan Wakely [Fri, 15 Nov 2019 19:58:15 +0000 (19:58 +0000)]
libstdc++: Implement LWG 3070 in path::lexically_relative
* src/c++17/fs_path.cc [_GLIBCXX_FILESYSTEM_IS_WINDOWS]
(is_disk_designator): New helper function.
(path::_Parser::root_path()): Use is_disk_designator.
(path::lexically_relative(const path&)): Implement resolution of
LWG 3070.
* testsuite/27_io/filesystem/path/generation/relative.cc: Check with
path components that look like a root-name.
From-SVN: r278313
Szabolcs Nagy [Fri, 15 Nov 2019 19:47:12 +0000 (19:47 +0000)]
m68k: add musl support
Add the dynamic linker name and fix a type name to use the public name
instead of the glibc internal name.
gcc/ChangeLog:
2019-11-15 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/m68k/linux.h (MUSL_DYNAMIC_LINKER): Define.
libgcc/ChangeLog:
2019-11-15 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/m68k/linux-unwind.h (struct uw_ucontext): Use sigset_t instead
of __sigset_t.
From-SVN: r278312
Joseph Myers [Fri, 15 Nov 2019 18:39:35 +0000 (18:39 +0000)]
Support C2x [[maybe_unused]] attribute.
This patch adds support for the C2x [[maybe_unused]] attribute, using
the same handler as for GNU __attribute__ ((unused)).
As with other such attribute support, I think turning certain warnings
into pedwarns for usage in cases where that is a constraint violation
can be addressed later as a bug fix, as can the C2x constraint for
various standard attributes that they do not appear more than once
inside a single [[]].
However, the warnings that appear in c2x-attr-maybe_unused-1.c (that
the attribute is ignored on member declarations) need to remain as
warnings not pedwarns, since C2x does permit the attribute there. (Or
they could be silenced, on the basis that GCC doesn't have warnings
for unused struct and union members so it's completely harmless that
it's ignoring an attribute that might do something useful with another
compiler that does have such warnings.)
Bootstrapped with no regressions on x86_64-pc-linux-gnu.
gcc/c:
* c-decl.c (std_attribute_table): Add maybe_unused.
gcc/testsuite:
* gcc.dg/c2x-attr-maybe_unused-1.c,
gcc.dg/c2x-attr-maybe_unused-2.c,
gcc.dg/c2x-attr-maybe_unused-3.c: New tests.
From-SVN: r278310
Kelvin Nilsen [Fri, 15 Nov 2019 17:52:25 +0000 (17:52 +0000)]
MAINTAINERS: Change my email address as maintainer.
ChangeLog:
2019-11-15 Kelvin Nilsen <kelvin@gcc.gnu.org>
* MAINTAINERS: Change my email address as maintainer.
From-SVN: r278309
Nick Clifton [Fri, 15 Nov 2019 17:39:14 +0000 (17:39 +0000)]
microblaze: fix PR65649
microblaze-linux-musl build fails without this.
(This is a rebase of an earlier patch posted on bugzilla.)
gcc/ChangeLog:
2019-11-15 Nick Clifton <nickc@redhat.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
PR target/65649
* config/microblaze/microblaze.c (print_operand): Print value as long.
Co-Authored-By: Szabolcs Nagy <szabolcs.nagy@arm.com>
From-SVN: r278308
Jan Hubicka [Fri, 15 Nov 2019 17:13:21 +0000 (18:13 +0100)]
ipa-inline.c (edge_badness, [...]): Revert accidental commit.
* ipa-inline.c (edge_badness, inline_small_functions): Revert
accidental commit.
From-SVN: r278307
Kwok Cheung Yeung [Fri, 15 Nov 2019 16:49:08 +0000 (16:49 +0000)]
[amdgcn] Unfix registers for frame pointer
Allow the registers used for the frame pointer to be used for other purposes
if the frame pointer is not being used.
2019-11-15 Kwok Cheung Yeung <kcy@codesourcery.com>
gcc/
* config/gcn/gcn.h (FIXED_REGISTERS): Unfix frame pointer.
(CALL_USED_REGISTERS): Make frame pointer callee-saved.
From-SVN: r278306
Kwok Cheung Yeung [Fri, 15 Nov 2019 16:32:29 +0000 (16:32 +0000)]
[amdgcn] Update lower bounds for the number of registers in non-leaf kernels
Reduce the lower limits on the number of registers requested by non-leaf
kernels to help improve CU occupancy.
2019-11-15 Kwok Cheung Yeung <kcy@codesourcery.com>
gcc/
* config/gcn/gcn.c (MAX_NORMAL_SGPR_COUNT, MAX_NORMAL_VGPR_COUNT): New.
(gcn_conditional_register_usage): Use constants in place of hard-coded
values.
(gcn_hsa_declare_function_name): Set lower bound for number of
SGPRs/VGPRs in non-leaf kernels to MAX_NORMAL_SGPR_COUNT and
MAX_NORMAL_VGPR_COUNT.
From-SVN: r278305
Martin Jambor [Fri, 15 Nov 2019 16:19:09 +0000 (17:19 +0100)]
ipa: Remove stray declaration
2019-11-15 Martin Jambor <mjambor@suse.cz>
* ipa-utils.h (ipa_remove_useless_jump_functions): Remove stray
declaration.
From-SVN: r278303
Kwok Cheung Yeung [Fri, 15 Nov 2019 15:36:34 +0000 (15:36 +0000)]
[amdgcn] Restrict registers available to non-kernel functions
Restrict the number of SGPRs and VGPRs available to non-kernel functions
to improve compute-unit occupancy with multiple threads.
2019-11-15 Kwok Cheung Yeung <kcy@codesourcery.com>
gcc/
* config/gcn/gcn.c (default_requested_args): New.
(gcn_parse_amdgpu_hsa_kernel_attribute): Initialize requested args
set with default_requested_args.
(gcn_conditional_register_usage): Limit register usage of non-kernel
functions. Reassign fixed registers if a non-standard set of args is
requested.
* config/gcn/gcn.h (FIXED_REGISTERS): Fix registers according to ABI.
From-SVN: r278301
Feng Xue [Fri, 15 Nov 2019 15:03:24 +0000 (15:03 +0000)]
re PR ipa/92528 (ICE in ipa_get_parm_lattices since r278219)
2019-11-15 Feng Xue <fxue@os.amperecomputing.com>
PR ipa/92528
* ipa-prop.c (update_jump_functions_after_inlining): Invalidate
aggregate jump function when inlined-to caller has no edge summary.
From-SVN: r278300
Kwok Cheung Yeung [Fri, 15 Nov 2019 14:56:41 +0000 (14:56 +0000)]
[amdgcn] Reinitialize registers for every function
gcn_conditional_register_usage needs to be called for every function
to set the fixed registers depending on the kernel args currently
requested.
2019-11-15 Kwok Cheung Yeung <kcy@codesourcery.com>
gcc/
* config/gcn/gcn.c (gcn_init_cumulative_args): Call reinit_regs.
From-SVN: r278299
Jason Merrill [Fri, 15 Nov 2019 14:51:05 +0000 (09:51 -0500)]
Implement P1816R0, class template argument deduction for aggregates.
Rather than reimplement brace elision here, we call reshape_init and then
discard the result. We needed to set CLASSTYPE_NON_AGGREGATE a bit more in
this patch, since outside a template it's set in check_bases_and_members.
* pt.c (maybe_aggr_guide, collect_ctor_idx_types): New.
(is_spec_or_derived): Split out from do_class_deduction.
(build_deduction_guide): Handle aggregate guide.
* class.c (finish_struct): Set CLASSTYPE_NON_AGGREGATE in a
template.
* cp-tree.h (CP_AGGREGATE_TYPE_P): An incomplete class is not an
aggregate.
From-SVN: r278298
Kwok Cheung Yeung [Fri, 15 Nov 2019 14:48:15 +0000 (14:48 +0000)]
[amdgcn] Use first lane of v1 for zero offset
Use v1 instead of v0 when a zero-valued VGPR is needed. This frees up
v0 for other purposes.
2019-11-15 Kwok Cheung Yeung <kcy@codesourcery.com>
gcc/
* config/gcn/gcn.c (gcn_expand_prologue): Remove initialization and
prologue use of v0.
(print_operand_address): Use v1 for zero vector offset.
From-SVN: r278297
Jonathan Wakely [Fri, 15 Nov 2019 14:38:59 +0000 (14:38 +0000)]
libstdc++: Fix definition of std::nostopstate object
Also add <stop_token> header to PCH and Doxygen config.
* doc/doxygen/user.cfg.in: Add <stop_token>.
* include/precompiled/stdc++.h: Likewise.
* include/std/stop_token: Fix definition of std::nostopstate.
* testsuite/30_threads/headers/stop_token/synopsis.cc: New test.
* testsuite/30_threads/headers/thread/types_std_c++20.cc: New test.
* testsuite/30_threads/stop_token/stop_source.cc: New test.
* testsuite/30_threads/stop_token/stop_token.cc: Remove unnecessary
dg-require directives. Remove I/O and inclusion of <iostream>.
From-SVN: r278296
Richard Sandiford [Fri, 15 Nov 2019 14:37:57 +0000 (14:37 +0000)]
Fix vector/scalar to vector/vector conversion (PR92515)
r278235 broke conversions of vector/scalar shifts into vector/vector
shifts on targets that only provide the latter. We need to record
whether a conversion is required in that case too.
Also, the old useless_type_conversion_p condition seemed unnecessarily
strong, since the shift amount can have a different signedness from
the shifted value and its vector type is never assumed to be identical
to vectype. The patch therefore uses tree_nop_conversion_p instead.
2019-11-15 Richard Sandiford <richard.sandiford@arm.com>
gcc/
PR tree-optimization/92515
* tree-vect-stmts.c (vectorizable_shift): Record incompatible op1
types when converting a vector/scalar shift into a vector/vector one,
using tree_nop_conversion_p instead of useless_type_conversion_p.
Move the conversion code to the transform block.
From-SVN: r278295
Matthew Malcomson [Fri, 15 Nov 2019 14:18:14 +0000 (14:18 +0000)]
[mid-end][__RTL] Account for column numbers in __RTL functions
The documentation for __RTL tests (see "(gccint) RTL Tests" info node) has the
following snippet.
```
The parser expects the RTL body to be in the format emitted by this
dumping function:
DEBUG_FUNCTION void
print_rtx_function (FILE *outfile, function *fn, bool compact);
when "compact" is true. So you can capture RTL in the correct format
from the debugger using:
(gdb) print_rtx_function (stderr, cfun, true);
and copy and paste the output into the body of the C function.
```
Since r264944 print_rtx_function prints column number information, which the
__RTL function parsing does not handle.
This patch handles column number information optionally, so pre-existing __RTL
functions still work, and the above documentation quote still holds.
Note: If people would prefer to require column information I could make a
slightly neater code and update existing tests.
I guess this would be OK since the intended use for __RTL functions is in these
testcases so there is no worry about other existing code.
bootstrapped and regtested on aarch64
bootstrapped and regtested on x86_64
Ok for trunk?
Cheers,
Matthew
gcc/ChangeLog:
2019-11-15 Matthew Malcomson <matthew.malcomson@arm.com>
* read-rtl-function.c
(function_reader::add_fixup_source_location): Take additional
parameter of a column.
(function_reader::maybe_read_location): Optionally parse column
information and pass to add_fixup_source_location.
gcc/testsuite/ChangeLog:
2019-11-15 Matthew Malcomson <matthew.malcomson@arm.com>
* gcc.dg/rtl/aarch64/rtl-handle-column-numbers.c: New test.
From-SVN: r278294
Richard Biener [Fri, 15 Nov 2019 13:52:09 +0000 (13:52 +0000)]
re PR tree-optimization/92512 (ICE in gimple_op, at gimple.h:2436)
2019-11-15 Richard Biener <rguenther@suse.de>
PR tree-optimization/92512
* tree-vect-loop.c (check_reduction_path): Fix operand index
computability check. Add check for second use in COND_EXPRs.
* gcc.dg/torture/pr92512.c: New testcase.
From-SVN: r278293
projects / platform / upstream / gcc.git / log