Peter Hutterer [Tue, 23 Feb 2021 23:27:35 +0000 (09:27 +1000)]
util: document our list interface
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 9 Mar 2021 23:44:55 +0000 (09:44 +1000)]
tools/per-slot-delta: handle KeyboardInterrupts nicely
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 9 Mar 2021 23:44:35 +0000 (09:44 +1000)]
tools/per-slot-delta: print the button state too while analyzing
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 9 Mar 2021 23:04:05 +0000 (09:04 +1000)]
completion: add missing libinput analyze subtools to the zsh completions
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
weizhixiang [Sun, 7 Mar 2021 06:39:56 +0000 (14:39 +0800)]
replace strncmp with strneq for safety-check
Signed-off-by: weizhixiang <weizhixiang@uniontech.com>
Pedro Ribeiro [Tue, 2 Mar 2021 11:59:50 +0000 (11:59 +0000)]
Add Lenovo Legion 5 keyboard to 50-system-lenovo.quirks
Signed-off-by: Pedro Ribeiro <pedrib@gmail.com>
Konstantin Kharlamov [Mon, 22 Feb 2021 16:52:40 +0000 (19:52 +0300)]
treewide: get rid of `tmp` argument in list_for_each_safe
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Konstantin Kharlamov [Mon, 22 Feb 2021 18:27:51 +0000 (21:27 +0300)]
util-list.h: simplify code by removing an excess initialization
The assignment of zero is done to work around false-positives of
coverity about uninitialized variable usage. Getting rid of it inside
the macro will allow in later commit to declare a variable inside
`for-loop` rather than outside of it.
Do it by declaring a new list_first_entry_by_type helper which accepts a
type rather than a variable.
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Peter Hutterer [Tue, 23 Feb 2021 09:02:45 +0000 (19:02 +1000)]
libinput 1.17.0
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 23 Feb 2021 06:55:43 +0000 (16:55 +1000)]
tools/record: fix two coverity complaints
In both cases we only read to drain the fd, we don't care about the return
value.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 1 Feb 2021 04:23:06 +0000 (14:23 +1000)]
tools: add a tool to print a libinput recording as a table
This makes it easier to visualize changes in various axes or key states that
should not be there, doubly so for long recordings.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 23 Feb 2021 03:30:13 +0000 (13:30 +1000)]
meson.build: build libinput replay as well
Just like the other python-based tools it's just a basename copy, so let's be
consistent here and have all tools perform that way.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 18 Feb 2021 21:40:46 +0000 (07:40 +1000)]
tools/record: use a helper function to get the next event for a device
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 18 Feb 2021 07:10:15 +0000 (17:10 +1000)]
tools/record: switch record over to using epoll
Using poll means more difficult fd management, epoll (together with am
modified version of the libinput_sources) makes this a lot easier by simply
using dispatch.
This means we are no longer reliant on a specific file descriptor order in the
poll array.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 19 Feb 2021 03:19:10 +0000 (13:19 +1000)]
tools/record: reword parts of the man page
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 18 Feb 2021 04:06:03 +0000 (14:06 +1000)]
tools/record: use safe_basename() to get to the hid report descriptor
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 18 Feb 2021 03:43:23 +0000 (13:43 +1000)]
utils: add a safe version of basename
So we don't need to worry about the libgen.h include game.
And we can switch trunkname over to that, making it a bit simpler.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 22 Feb 2021 04:23:27 +0000 (14:23 +1000)]
tools/record: simplify the behavior to emulate Python's join()
Instead of a boolean "is_first", just change the separator.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 23 Feb 2021 00:53:31 +0000 (10:53 +1000)]
tools/replay: Enter quits if there are no events
If we have no events in any of the recorded devices, state that this is the
case and make Enter simply quit instead of a pointless while loop.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 19 Feb 2021 03:31:56 +0000 (13:31 +1000)]
tools/replay: search for the first event with a timestamp
When running with --with-libinput, the first event is the DEVICE_ADDED event
for our device. Those events do not have a timestamp.
We have to find the first event in the recording with a timestamp instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 22 Feb 2021 04:52:16 +0000 (14:52 +1000)]
tools/record: print a header as first line
To make the file format easier to detect
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
yuri1969 [Fri, 19 Feb 2021 21:08:55 +0000 (22:08 +0100)]
Fix worng quirk name in doc
The doc mentioned 'AttrTouchPressureRange' quirk but `src/quirks.c` defines
'AttrPressureRange' instead. This led to unknown quirk name errors.
Signed-off-by: yuri1969 <1969yuri1969@gmail.com>
Peter Hutterer [Thu, 18 Feb 2021 21:12:17 +0000 (07:12 +1000)]
tools/record: fix outdated comment
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 18 Feb 2021 04:28:12 +0000 (14:28 +1000)]
tools/record: de-inline our functions
Let's leave this up to the compiler, the usual side-effect of inline (compiler
doesn't complain about an unused static function) doesn't apply here.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 18 Feb 2021 22:44:23 +0000 (08:44 +1000)]
tools/record: correct the evdev data format in the man page
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 17 Feb 2021 23:47:14 +0000 (09:47 +1000)]
meson.build: consolidate all man pages
They all use the same configure_file() process, so let's do them all in a
loop.
Exceptions are the test-suite man page.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 17 Feb 2021 23:39:46 +0000 (09:39 +1000)]
meson.build: drop the dummy config data and use copy: true instead
We require the meson version this was introduced in, so let's use it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
satrmb [Tue, 16 Feb 2021 10:13:29 +0000 (11:13 +0100)]
test: add test cases for 2/3 finger movement after drag-lock
Same as after a tap, just with a short drag between tap and 2/3 finger movement.
Also fixes a finger coord typo in one of the previously added test cases.
Signed-off-by: satrmb <10471-satrmb@users.noreply.gitlab.freedesktop.org>
Peter Hutterer [Tue, 16 Feb 2021 03:10:18 +0000 (13:10 +1000)]
libinput 1.16.902
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 15 Feb 2021 07:48:34 +0000 (17:48 +1000)]
test: add test cases for 2/3 finger movement after tap
We have two behaviors here:
- tap + 2fg -> scrolling
- tap + 1fg move + 2f down -> dragging
Let's document this. The 3fg case only has one situation, so let's test that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 15 Feb 2021 08:00:18 +0000 (18:00 +1000)]
test: drop the needless base event conversion
This was just there to avoid unused variable warnings but the simpler approach
to that is to just not assign a variable in the first place.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 15 Feb 2021 07:34:34 +0000 (17:34 +1000)]
test: print the event type on mismatch
We already have a helper function for this, let's use it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 15 Feb 2021 07:06:34 +0000 (17:06 +1000)]
doc: update the docs with a note regarding multifinger dragging
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 15 Feb 2021 01:49:30 +0000 (11:49 +1000)]
gitlab CI: move the no-libwacom test suite into its own stage
Easier to spot visually in the GUI that way
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
satrmb [Fri, 12 Feb 2021 13:35:53 +0000 (14:35 +0100)]
test: fix a few missing or wrong drag-lock timeouts
These had no consequences apart from occasional "system is too slow" messages,
because the test suite's shorter tap timeout is just barely long enough
for drag-lock, and/or because litest_assert_button_event waits for an event
anyway.
Signed-off-by: satrmb <10471-satrmb@users.noreply.gitlab.freedesktop.org>
satrmb [Fri, 12 Feb 2021 11:09:07 +0000 (12:09 +0100)]
touchpad: permit only one finger on the touchpad at the start of a tap-drag
This only affects the actual dragging part of the tap-and-drag interaction;
n-finger tap-and-drag is supposed to be performed with a n-finger tap
followed by a 1-finger drag.
Allowing a second finger in the middle of a drag is still necessary for a
finger swap, which users may need in long-distance drags, especially when
drag-lock is disabled.
Signed-off-by: satrmb <10471-satrmb@users.noreply.gitlab.freedesktop.org>
satrmb [Wed, 23 Sep 2020 09:53:55 +0000 (11:53 +0200)]
touchpad: stretch the tap-and-drag timeout a bit depending on finger count
Some users reported problems triggering multi-finger tap-and-drag,
with reliability decreasing as the finger count increased.
This is plausible because they may shift towards moving the whole hand
up and down, which obviously takes more time than just a finger.
Signed-off-by: satrmb <10471-satrmb@users.noreply.gitlab.freedesktop.org>
Peter Hutterer [Mon, 15 Feb 2021 02:38:55 +0000 (12:38 +1000)]
doc/user: generate the required package list for the CI distributions
Use yq to extract the package list from the CI configuration, then dump that
into the user docs. This provides the long-requested commands to install all
dependencies without the maintenance effort or risk of going stale.
Note that we are *not* building this in the CI, it's just not needed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 12 Feb 2021 03:05:57 +0000 (13:05 +1000)]
gitlab CI: add a job to make sure we're running all test suites
Only needs to run when meson.build or the CI script update
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 5 Feb 2021 04:51:02 +0000 (14:51 +1000)]
test: drop the custom group names
The group names are forced by check (they are called suite names there) but
for our test suite they provide very little benefit. Much easier to just
use the filename a test is in as group name.
This removes the pure substring match for --filter-group, it's now fnmatch
only. group names are short enough that the typing isn't an issue and we don't
want to run tests twice (e.g. 'pad' is also in 'touchpad').
This patch caused #574 until it got fixed in
d838e3a3a4c
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 5 Feb 2021 04:36:16 +0000 (14:36 +1000)]
utils: add a trunkname() function to extract the trunk of a filename
/path/to/foo.bar returns "foo"
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 12 Feb 2021 03:03:44 +0000 (13:03 +1000)]
gitlab CI: make the test suite names a list
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 12 Feb 2021 00:24:43 +0000 (10:24 +1000)]
test: use motion events to check the "system is too slow" message
Using buttons for this test can trigger debounce warnings instead (in
addition?) to the warning we actually check for. Let's use motion events
instead and double the loop while we're at it so we have double the chance of
triggering at least one warning.
Fixes #574 for unknown reasons
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 11 Feb 2021 21:55:21 +0000 (07:55 +1000)]
test: wrap the litest user data into a struct
litest itself requires the libinput user_data to be set to its own context
struct (see close_restricted). A test that needs its own user_data must not
override this struct - if the context is accessed during libinput_dispatch()
we'll get memory corruption.
See #574
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 11 Feb 2021 23:29:24 +0000 (09:29 +1000)]
test: move a helper function close to its caller
This is a custom log function for one single test, let's move it next to that
test.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 11 Feb 2021 21:28:18 +0000 (07:28 +1000)]
gitlab CI: run the scan-build analysis jobs in script
after_script ignores any exit status so we can't actually fail the job here
Fixes #573
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 11 Feb 2021 21:21:34 +0000 (07:21 +1000)]
tools/record: remove a useless assignment
It's overwritten a few lines south of here.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 11 Feb 2021 21:19:40 +0000 (07:19 +1000)]
test: init an array to zero to silence scan-build
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 11 Feb 2021 21:20:27 +0000 (07:20 +1000)]
tools/record: add some curly braces
list_for_each is just a fancy for loop but it looks weird without braces.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 11 Feb 2021 05:42:12 +0000 (15:42 +1000)]
tests: drop the duplicate test for pointer event conversion
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 11 Feb 2021 05:31:12 +0000 (15:31 +1000)]
test: don't set the log handler 10 times
Once is enough, we don't need to set it inside the loop.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 5 Feb 2021 04:51:02 +0000 (14:51 +1000)]
gitlab CI: rename the VM stage "test-suite"
A much more sensible name than "vm"
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
наб [Tue, 9 Feb 2021 12:52:20 +0000 (13:52 +0100)]
totem: separate X/Y resolution from touch size in discriminator
Ref: https://gitlab.freedesktop.org/libinput/libinput/-/commit/
bf4277623f7c24286b9f1e4b3ace51fbb5bb6a98#note_793589
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
наб [Tue, 9 Feb 2021 12:50:57 +0000 (13:50 +0100)]
totem: fix suspension-as-addition and resumption-as-removal in interface
Ref: https://gitlab.freedesktop.org/libinput/libinput/-/commit/
bf4277623f7c24286b9f1e4b3ace51fbb5bb6a98#note_793592
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Gablegritule [Mon, 8 Feb 2021 22:11:06 +0000 (22:11 +0000)]
quirks: add pressure ranges for the Dell Latitude E5510 TouchPad
The default setting makes the "Dell Latitude E5510 TouchPad" too sensitive and
consequently difficult to use.
Note that the the size of the TouchPad is detected to be higher than it is
(the side-bars are half out of the TouchPad), see
https://github.com/systemd/systemd/pull/18493 for the hwdb overrides for this
device.
Signed-off-by: Gablegritule <guillet.gabriel@laposte.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 3 Feb 2021 00:19:20 +0000 (10:19 +1000)]
Create /etc/libinput on install
Users that need to create the local-overrides.quirks are sometimes hesitant to
do so because /etc/libinput doesn't exist by default. Let's create it on
install.
Related #568
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 4 Feb 2021 22:35:10 +0000 (08:35 +1000)]
touchpad: disable the pressure axes wherever the resolution is nonzero
The kernel/udev set the pressure resolution to nonzero to indicate the value
is in a known scale (units/g). We use that information to disable the
pressure axis on such devices - real pressure cannot be translated to
contact size.
For the kernel patch see:
https://www.spinics.net/lists/linux-input/msg71237.html
Fixes #569
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 5 Feb 2021 01:21:47 +0000 (11:21 +1000)]
test: don't require root to list tests
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 2 Feb 2021 23:36:29 +0000 (09:36 +1000)]
quirks: reword the requirements section in the quirks README
Change the wording from "these will fail" to "this must be followed" which is
easier to understand. And add the requirement for uppercase hex numbers as
enforced since
c412924003b3154.
Related #568
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 3 Feb 2021 04:50:23 +0000 (14:50 +1000)]
doc/user: expand the explanations on how to submit a merge request
I keep answering this in bug reports, much easier to just have a link to
copy/paste.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 3 Feb 2021 04:15:22 +0000 (14:15 +1000)]
doc/user: some whitespace fixes
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 2 Feb 2021 01:54:14 +0000 (11:54 +1000)]
quirks: improve the README
Make the headers valid markdown and reword/reformat a few other things
to make it clearer and easier to read.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 1 Feb 2021 09:14:10 +0000 (19:14 +1000)]
libinput 1.16.901
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Gary Wolfe [Mon, 25 Jan 2021 13:25:13 +0000 (08:25 -0500)]
Dell touchpad was too sensitive with default settings
The touchpad for the Dell Inspiron 15R N5110 was too sensitive with default settings, leading to excessive movement when lifting finger.
Fixes #565
Signed-off-by: Gary Wolfe <avidgamefan@yahoo.com>
Peter Hutterer [Sun, 24 Jan 2021 22:17:21 +0000 (08:17 +1000)]
tools: add a tool to analyze the finger count from a recording
Given a libinput recording, print the timestamps of any finger changes, i.e.
which slots are currently logically down. For example:
Timestamp | Rel time | Slots |
--------------------------------------
0.000000 | +0.000s | + | | | |
0.454631 | +0.454s | | | | |
5.065401 | +4.610s | + | | | |
6.140281 | +1.074s | + | + | | |
7.410377 | +1.270s | | + | | |
7.420200 | +0.009s | | | | |
11.233108 | +3.812s | + | + | | |
11.850206 | +0.617s | | | | |
13.827740 | +1.977s | + | | | |
14.704027 | +0.876s | + | + | | |
16.050577 | +1.346s | + | | | |
16.905186 | +0.854s | | | | |
This data is available with the per-slot-delta tool but the output here is
more compressed, making it easier to detect stuck fingers. Pressure
thresholds are not currently supported.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 25 Jan 2021 07:22:04 +0000 (17:22 +1000)]
tools/record: print the wall clock time every few seconds
For long-running recordings it's useful to know what the actual time was when
a particular event occured. A user can simply check the clock or system logs
for the time and thus know which portion of the recording to focus on.
Let's print the time into the recording, every 5 seconds (aligned at the 5,
10, 15s marks) or, if no events occured in the last 5 seconds, before the next
event. This granularity should be enough to identify the interesting parts of
a recording.
Let's print this as a comment until we have a use-case that requires parsing
this data.
The timer is the simplest approach, it just repeats at a fixed 5 seconds
interval from startup. There may be time drift, we can fix that if needed.
Fixes #560
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 25 Jan 2021 07:12:12 +0000 (17:12 +1000)]
tools/record: use a pointer to the libinput fd poll entry
No functional changes, this makes the code slightly more readable, especially
once we start adding more "special" fds.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 25 Jan 2021 07:05:00 +0000 (17:05 +1000)]
tools/record: use a pointer to the signalfd poll entry
No functional changes, this makes the code slightly more readable, especially
once we start adding more "special" fds.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 25 Jan 2021 06:30:22 +0000 (16:30 +1000)]
tools/record: narrow the scope of two variables
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 25 Jan 2021 05:56:03 +0000 (15:56 +1000)]
tools/record: initialize all pollfds in the same loop
Minor tidying up the code, set the default values for all fds in the same loop
instead of having it split to wherever the fd is created.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 25 Jan 2021 03:12:25 +0000 (13:12 +1000)]
Use python black for all pyhon file formatting
Let's enforce a consistent (and verifiable) style everywhere.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Jonas Ådahl [Thu, 28 Jan 2021 07:32:03 +0000 (08:32 +0100)]
doc: fix IRC channel name
It said #wayland-devel, but it's #wayland.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
weizhixiang [Fri, 8 Jan 2021 06:16:54 +0000 (14:16 +0800)]
modify macro streq/strneq for check one null pointer
Signed-off-by: weizhixiang <1138871845@qq.com>
Minor modifications applied by Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 14 Jan 2021 02:55:30 +0000 (12:55 +1000)]
quirks: disable pressure on the Lenovo Yoga 9i touchpad
This touchpad is a true pressurepad and the pressure axis gives us physical
pressure down. Using it as contact size gives flaky touch detection, so let's
just disable the axis until we do something with that value.
Fixes #562
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 7 Jan 2021 01:26:01 +0000 (11:26 +1000)]
doc/user: list the known package repositories for libinput from git
Because dnf install is a lot easier than building from git where one just
wants to test the latest libinput.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
weizhixiang [Wed, 6 Jan 2021 09:46:14 +0000 (17:46 +0800)]
check return value for libudev/udev_device_get_action
Signed-off-by: weizhixiang <1138871845@qq.com>
Peter Hutterer [Mon, 4 Jan 2021 00:25:43 +0000 (10:25 +1000)]
gitlab CI: use Fedora 33
This requires the latest CI templates for the updated mkosi fixes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 4 Jan 2021 01:15:51 +0000 (11:15 +1000)]
gitlab CI: fix flake8 complaints
tools/libinput-measure-fuzz.py:212:15:
F523 '...'.format(...) has unused arguments at position(s): 1
But the E741 is better turned off in general:
tools/libinput-measure-fuzz.py:319:29: E741 ambiguous variable name 'l'
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Torstein Husebø [Thu, 27 Aug 2020 17:52:34 +0000 (19:52 +0200)]
treewide: fix typos
Signed-off-by: Torstein Husebø <torstein@huseboe.net>
Peter Hutterer [Wed, 16 Dec 2020 00:47:58 +0000 (10:47 +1000)]
doc: somewhat document the write_open for lid switches
Not a full documentation but slightly more information than before. This is
too niche to document it fully, we're only using it on one device anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 15 Dec 2020 05:46:50 +0000 (15:46 +1000)]
doc/user: document that we're only using internal devices for DWT
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Blaž Hrastnik [Tue, 15 Dec 2020 03:39:23 +0000 (12:39 +0900)]
Match all Surface (Pro/Laptop/Book) devices.
Signed-off-by: Blaž Hrastnik <blaz@mxxn.io>
Peter Hutterer [Wed, 25 Nov 2020 03:26:16 +0000 (13:26 +1000)]
touchpad: increase the jump detection interval to 30ms
On serial touchpads it's common enough that frames slow down tofrom the usual
12ms to 24ms. That's too close to our 25ms cutoff so if we have a minor delay,
we end up missing out on jump detection.
Fixes #541
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 9 Dec 2020 11:18:58 +0000 (21:18 +1000)]
gitlab CI: don't allow VM test failures
The VM runs are much more reliable now and where they do fail, they can be
retriggered.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 14 Dec 2020 08:57:31 +0000 (18:57 +1000)]
test: plug a leak in the tablet smoothing test
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 9 Dec 2020 11:21:24 +0000 (21:21 +1000)]
test: plug a memleak in a quirks test
Introduced in
56f4af51eca4ceec30e382d0d7c9972a57fd1aa2
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Jef Driesen [Mon, 7 Dec 2020 19:28:45 +0000 (20:28 +0100)]
quirks: add quirk for Dell XPS 15 9500 touchpad
The Dell XPS 15 9500 has a large touchpad without any visible markers
for the touchpad buttons. Since the ModelTouchpadVisibleMarker quirk is
enabled by default for all Dell touchpads, the middle button area ends
up too small. Disable the quirk again for this specific model.
Fixes #545
Signed-off-by: Jef Driesen <jefdriesen@telenet.be>
Peter Hutterer [Mon, 7 Dec 2020 23:58:16 +0000 (09:58 +1000)]
test: add a test for model quirk overrides
Related to #545
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 7 Oct 2020 23:47:36 +0000 (09:47 +1000)]
tablet: disable smoothing for AES devices
Data in
https://gitlab.freedesktop.org/libinput/libinput/-/issues/225#note_379034
suggests that AES devices have lower noise than the older EMR
devices, so let's try disabling it for those devices.
We can't directly get the AES devices in libinput unless we want to add a
whole bunch of quirks for the various vid/pid combinations. But we can get
that info from libwacom, primarily because we know that libwacom will list all
known AES pens for any device. So we can check for one that we know of (0x11)
and if it's in the list, the tablet is an AES tablet.
Setting the history size to 1 means we never do any actual smoothing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 18 Nov 2020 01:07:02 +0000 (11:07 +1000)]
udev: update rules to handle bind/unbind events
Summary: we expect add, change or remove but kernel 4.12 added bind and
unbind. These events were previously discarded by udevd. Our rules should
handle any event *but* remove, so update as suggested in the announce email
linked below.
For a longer explanation, see the system 247rc2 announcement
https://lists.freedesktop.org/archives/systemd-devel/2020-November/045570.html
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 23 Nov 2020 03:19:48 +0000 (13:19 +1000)]
gitlab CI: check commits/CI template generation before spinning up containers
If either of those fails, no point in trying to generate containers.
And move the MR check down to the deploy stage where it belongs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 23 Nov 2020 03:16:14 +0000 (13:16 +1000)]
gitlab CI: use ci-fairy generate-template --verify
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 23 Nov 2020 03:13:09 +0000 (13:13 +1000)]
gitlab CI: use the CI-fairy image
This removes the need to pull a docker image for each of those stages.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 16 Nov 2020 03:25:09 +0000 (13:25 +1000)]
gitlab CI: add curl to the debian image
The coverity job on debian needs curl.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 11 Nov 2020 05:07:34 +0000 (15:07 +1000)]
gitlab CI: generate the package lists from the config.yaml
The string list is getting too confusing.
This gets rid of the separate packageset for qemu. That packageset only
differed by adding valgrind, we can just keep that in the same list.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 10 Nov 2020 23:08:52 +0000 (09:08 +1000)]
gitlab CI: update to latest templates
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 11 Nov 2020 23:34:33 +0000 (09:34 +1000)]
gitlab CI: remove unused custom ubuntu install script
Looks like this has been obsolete since
4df2ac731ff3ae420081b3e243fc2cec636bdfd6 where it stopped passing in the
packages.
And a bug caused the template to checked the "version" against "ubuntu", so
the script hasn't actually been included in any job anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Sun, 8 Nov 2020 21:50:08 +0000 (07:50 +1000)]
gitlab CI: update Ubuntu to current distros
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 11 Nov 2020 01:18:30 +0000 (11:18 +1000)]
gitlab CI: rename FREEBSD_PKGS to FREEBSD_PACKAGES for consistency
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 11 Nov 2020 01:16:06 +0000 (11:16 +1000)]
gitlab CI: switch the coverity job to Debian stable
coverity doesn't work with gcc 10, it fails with "invalid GNU version
number: 201". F31 is about to be EOL but we can't use to F32 or later.
So let's switch to debian stable instead, that one will stick around for a bit
longer.
Debian packages are the same as the Ubuntu packages
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>