phy: dphy: Correct clk_pre parameter

[ Upstream commit 9a8406ba1a9a2965c27e0db1d7753471d12ee9ff ]

The D-PHY specification (v1.2) explicitly mentions that the T-CLK-PRE
parameter's unit is Unit Interval(UI) and the minimum value is 8.  Also,
kernel doc of the 'clk_pre' member of struct phy_configure_opts_mipi_dphy
mentions that it should be in UI.  However, the dphy core driver wrongly
sets 'clk_pre' to 8000, which seems to hint that it's in picoseconds.

So, let's fix the dphy core driver to correctly reflect the T-CLK-PRE
parameter's minimum value according to the D-PHY specification.

I'm assuming that all impacted custom drivers shall program values in
TxByteClkHS cycles into hardware for the T-CLK-PRE parameter.  The D-PHY
specification mentions that the frequency of TxByteClkHS is exactly 1/8
the High-Speed(HS) bit rate(each HS bit consumes one UI).  So, relevant
custom driver code is changed to program those values as
DIV_ROUND_UP(cfg->clk_pre, BITS_PER_BYTE), then.

Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK.
Help is needed to test with other i.MX8mq, Meson and Rockchip platforms,
as I don't have the hardwares.

Fixes: 2ed869990e14 ("phy: Add MIPI D-PHY configuration options")
Tested-by: Liu Ying <victor.liu@nxp.com> # RM67191 DSI panel on i.MX8mq EVK
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c
Tested-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c
Tested-by: Guido Günther <agx@sigxcpu.org> # Librem 5 (imx8mq) with it's rather picky panel
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20220124024007.1465018-1-victor.liu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: f_fs: Fix use-after-free for epfile

[ Upstream commit ebe2b1add1055b903e2acd86b290a85297edc0b3 ]

Consider a case where ffs_func_eps_disable is called from
ffs_func_disable as part of composition switch and at the
same time ffs_epfile_release get called from userspace.
ffs_epfile_release will free up the read buffer and call
ffs_data_closed which in turn destroys ffs->epfiles and
mark it as NULL. While this was happening the driver has
already initialized the local epfile in ffs_func_eps_disable
which is now freed and waiting to acquire the spinlock. Once
spinlock is acquired the driver proceeds with the stale value
of epfile and tries to free the already freed read buffer
causing use-after-free.

Following is the illustration of the race:

      CPU1                                  CPU2

   ffs_func_eps_disable
   epfiles (local copy)
ffs_epfile_release
ffs_data_closed
if (last file closed)
ffs_data_reset
ffs_data_clear
ffs_epfiles_destroy
spin_lock
dereference epfiles

Fix this races by taking epfiles local copy & assigning it under
spinlock and if epfiles(local) is null then update it in ffs->epfiles
then finally destroy it.
Extending the scope further from the race, protecting the ep related
structures, and concurrent accesses.

Fixes: a9e6f83c2df1 ("usb: gadget: f_fs: stop sleeping in ffs_func_eps_disable")
Co-developed-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Pratham Pratap <quic_ppratap@quicinc.com>
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Link: https://lore.kernel.org/r/1643256595-10797-1-git-send-email-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mq: fix mipi_csi bidirectional port numbers

[ Upstream commit 283d45145fbf460dbaf0229cacd7ed60ec52f364 ]

The port numbers for the imx8mq mipi csi controller are wrong and
the mipi driver can't find any media devices as port@1 is connected
to the CSI bridge, not port@0. And port@0 is connected to the
source - the sensor. Fix this.

Fixes: bcadd5f66c2a ("arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions")
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx7ulp: Fix 'assigned-clocks-parents' typo

[ Upstream commit 6d58c5e21a3fe355ce6d1808e96d02a610265218 ]

The correct property name is 'assigned-clock-parents', not
'assigned-clocks-parents'. Though if the platform works with the typo, one
has to wonder if the property is even needed.

Signed-off-by: Rob Herring <robh@kernel.org>
Fixes: 8b8c7d97e2c7 ("ARM: dts: imx7ulp: Add wdog1 node")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable()

[ Upstream commit cfc826c88a79e22ba5d8001556eb2c7efd8a01b6 ]

This error path needs to decrement "usbphyc->n_pll_cons.counter" before
returning.

Fixes: 5b1af71280ab ("phy: stm32: rework PLL Lock detection")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220112111724.GB3019@kili
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: xilinx: zynqmp: Fix bus width setting for SGMII

[ Upstream commit 37291f60d0822f191748c2a54ce63b0bc669020f ]

TX_PROT_BUS_WIDTH and RX_PROT_BUS_WIDTH are single registers with
separate bit fields for each lane. The code in xpsgtr_phy_init_sgmii was
not preserving the existing register value for other lanes, so enabling
the PHY in SGMII mode on one lane zeroed out the settings for all other
lanes, causing other PS-GTR peripherals such as USB3 to malfunction.

Use xpsgtr_clr_set to only manipulate the desired bits in the register.

Fixes: 4a33bea00314 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20220126001600.1592218-1-robert.hancock@calian.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6qdl-udoo: Properly describe the SD card detect

[ Upstream commit 993d66140f8d1c1853a3b58b77b43b681eb64dee ]

GPIO7_IO00 is used as SD card detect.

Properly describe this in the devicetree.

Fixes: 40cdaa542cf0 ("ARM: dts: imx6q-udoo: Add initial board support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: fbtft: Fix error path in fbtft_driver_module_init()

[ Upstream commit 426aca16e903b387a0b0001d62207a745c67cfd3 ]

If registering the platform driver fails, the function must not return
without undoing the spi driver registration first.

Fixes: c296d5f9957c ("staging: fbtft: core support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220118181338.207943-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: broadcom: Kconfig: Fix PHY_BRCM_USB config option

[ Upstream commit 5070ce86246a8a4ebacd0c15b121e6b6325bc167 ]

The previous commit 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on
the BCM4908") added a second "default" line for ARCH_BCM_4908 above
the original "default" line for ARCH_BRCMSTB. When two "default"
lines are used, only the first is used and this change stopped
the PHY_BRCM_USB option for being enabled for ARCH_BRCMSTB.
The fix is to use one "default line with "||".

Fixes: 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on the BCM4908")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211201180653.35097-4-alcooperx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: meson8b: Fix the UART device-tree schema validation

[ Upstream commit 3375aa77135f6aeb1107ed839a2050a4118444bc ]

The dt-bindings for the UART controller only allow the following values
for Meson8 SoCs:
- "amlogic,meson8b-uart", "amlogic,meson-ao-uart"
- "amlogic,meson8b-uart"

Use the correct fallback compatible string "amlogic,meson-ao-uart" for
AO UART. Drop the "amlogic,meson-uart" compatible string from the EE
domain UART controllers.

Also update the order of the clocks to match the order defined in the
yaml bindings.

Fixes: b02d6e73f5fc96 ("ARM: dts: meson8b: use stable UART bindings with correct gate clock")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211227180026.4068352-4-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: meson8: Fix the UART device-tree schema validation

[ Upstream commit 57007bfb5469ba31cacf69d52195e8b75f43e32d ]

The dt-bindings for the UART controller only allow the following values
for Meson8 SoCs:
- "amlogic,meson8-uart", "amlogic,meson-ao-uart"
- "amlogic,meson8-uart"

Use the correct fallback compatible string "amlogic,meson-ao-uart" for
AO UART. Drop the "amlogic,meson-uart" compatible string from the EE
domain UART controllers.

Also update the order of the clocks to match the order defined in the
yaml schema.

Fixes: 6ca77502050eff ("ARM: dts: meson8: use stable UART bindings with correct gate clock")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211227180026.4068352-3-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: meson: Fix the UART compatible strings

[ Upstream commit 5225e1b87432dcf0d0fc3440824b91d04c1d6cc1 ]

The dt-bindings for the UART controller only allow the following values
for Meson6 SoCs:
- "amlogic,meson6-uart", "amlogic,meson-ao-uart"
- "amlogic,meson6-uart"

Use the correct fallback compatible string "amlogic,meson-ao-uart" for
AO UART. Drop the "amlogic,meson-uart" compatible string from the EE
domain UART controllers.

Fixes: ec9b59162fd831 ("ARM: dts: meson6: use stable UART bindings")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211227180026.4068352-2-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Fix timer regression for beagleboard revision c

[ Upstream commit 23885389dbbbbc698986e77a45c1fc44a6e3632e ]

Commit e428e250fde6 ("ARM: dts: Configure system timers for omap3")
caused a timer regression for beagleboard revision c where the system
clockevent stops working if omap3isp module is unloaded.

Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks
applied that limit the usable timers for no good reason. This also affects
the power management as we use the system clock instead of the 32k clock
source.

Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer
quirks. This allows us to remove the timer quirks for later beagleboard
revisions. We also need to update the related timer quirk check for the
correct compatible property.

Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3")
Cc: linux-kernel@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Populate pipe dbuf slices more accurately during readout

commit 85bb289215cf37e05e9581b39b114db1293f9ecd upstream.

During readout we cannot assume the planes are actually using the
slices they are supposed to use. The BIOS may have misprogrammed
things and put the planes onto the wrong dbuf slices. So let's
do the readout more carefully to make sure we really know which
dbuf slices are actually in use by the pipe at the time.

Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit b3dcc6dc0f32612d04839c2fb32e94d0ebf92c98)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Allow !join_mbus cases for adlp+ dbuf configuration

commit 8fd5a26e43859547790a7995494c952b708ab3b5 upstream.

Reintroduce the !join_mbus single pipe cases for adlp+.

Due to the mbus relative dbuf offsets in PLANE_BUF_CFG we
need to know the actual slices used by the pipe when doing
readout, even when mbus joining isn't enabled. Accurate
readout will be needed to properly sanitize invalid BIOS
dbuf configurations.

This will also make it much easier to play around with the
!join_mbus configs for testin/workaround purposes.

Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit eef173954432fe0612acb63421a95deb41155cdc)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/rockchip: vop: Correct RK3399 VOP register fields

commit 9da1e9ab82c92d0e89fe44cad2cd7c2d18d64070 upstream.

Commit 7707f7227f09 ("drm/rockchip: Add support for afbc") switched up
the rk3399_vop_big[] register windows, but it did so incorrectly.

The biggest problem is in rk3288_win23_data[] vs.
rk3368_win23_data[] .format field:

  RK3288's format: VOP_REG(RK3288_WIN2_CTRL0, 0x7, 1)
  RK3368's format: VOP_REG(RK3368_WIN2_CTRL0, 0x3, 5)

Bits 5:6 (i.e., shift 5, mask 0x3) are correct for RK3399, according to
the TRM.

There are a few other small differences between the 3288 and 3368
definitions that were swapped in commit 7707f7227f09. I reviewed them to
the best of my ability according to the RK3399 TRM and fixed them up.

This fixes IOMMU issues (and display errors) when testing with BG24
color formats.

Fixes: 7707f7227f09 ("drm/rockchip: Add support for afbc")
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220119161104.1.I1d01436bef35165a8cdfe9308789c0badb5ff46a@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/display: change pipe policy for DCN 2.0

commit 6e7545ddb13416fd200e0b91c0acfd0404e2e27b upstream.

Fixes hangs on driver load with multiple displays on
DCN 2.0 parts.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215511
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1877
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1886
Fixes: ee2698cf79cc ("drm/amd/display: Changed pipe split policy to allow for multi-display pipe split")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM: s2idle: ACPI: Fix wakeup interrupts handling

commit cb1f65c1e1424a4b5e4a86da8aa3b8fd8459c8ec upstream.

After commit e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race
related to the EC GPE") wakeup interrupts occurring immediately after
the one discarded by acpi_s2idle_wake() may be missed.  Moreover, if
the SCI triggers again immediately after the rearming in
acpi_s2idle_wake(), that wakeup may be missed too.

The problem is that pm_system_irq_wakeup() only calls pm_system_wakeup()
when pm_wakeup_irq is 0, but that's not the case any more after the
interrupt causing acpi_s2idle_wake() to run until pm_wakeup_irq is
cleared by the pm_wakeup_clear() call in s2idle_loop().  However,
there may be wakeup interrupts occurring in that time frame and if
that happens, they will be missed.

To address that issue first move the clearing of pm_wakeup_irq to
the point at which it is known that the interrupt causing
acpi_s2idle_wake() to tun will be discarded, before rearming the SCI
for wakeup.  Moreover, because that only reduces the size of the
time window in which the issue may manifest itself, allow
pm_system_irq_wakeup() to register two second wakeup interrupts in
a row and, when discarding the first one, replace it with the second
one.  [Of course, this assumes that only one wakeup interrupt can be
discarded in one go, but currently that is the case and I am not
aware of any plans to change that.]

Fixes: e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race related to the EC GPE")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI/IORT: Check node revision for PMCG resources

commit da5fb9e1ad3fbf632dce735f1bdad257ca528499 upstream.

The original version of the IORT PMCG definition had an oversight
wherein there was no way to describe the second register page for an
implementation using the recommended RELOC_CTRS feature. Although the
spec was fixed, and the final patches merged to ACPICA and Linux written
against the new version, it seems that some old firmware based on the
original revision has survived and turned up in the wild.

Add a check for the original PMCG definition, and avoid filling in the
second memory resource with nonsense if so. Otherwise it is likely that
something horrible will happen when the PMCG driver attempts to probe.

Reported-by: Michael Petlan <mpetlan@redhat.com>
Fixes: 24e516049360 ("ACPI/IORT: Add support for PMCG")
Cc: <stable@vger.kernel.org> # 5.2.x
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/75628ae41c257fb73588f7bf1c4459160e04be2b.1643916258.git.robin.murphy@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-tcp: fix bogus request completion when failing to send AER

commit 63573807b27e0faf8065a28b1bbe1cbfb23c0130 upstream.

AER is not backed by a real request, hence we should not incorrectly
assume that when failing to send a nvme command, it is a normal request
but rather check if this is an aer and if so complete the aer (similar
to the normal completion path).

Cc: stable@vger.kernel.org
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: socfpga: fix missing RESET_CONTROLLER

commit 3037b174b1876aae6b2d1a27a878c681c78ccadc upstream.

The SocFPGA machine since commit b3ca9888f35f ("reset: socfpga: add an
early reset driver for SoCFPGA") uses reset controller, so it should
select RESET_CONTROLLER explicitly.  Selecting ARCH_HAS_RESET_CONTROLLER
is not enough because it affects only default choice still allowing a
non-buildable configuration:

  /usr/bin/arm-linux-gnueabi-ld: arch/arm/mach-socfpga/socfpga.o: in function `socfpga_init_irq':
  arch/arm/mach-socfpga/socfpga.c:56: undefined reference to `socfpga_reset_init'

Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org>
Fixes: b3ca9888f35f ("reset: socfpga: add an early reset driver for SoCFPGA")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: Fix boot regression on Skomer

commit d9058d6a0e92d8e4a00855f8fe204792f42794db upstream.

The signal routing on the Skomer board was incorrect making
it impossible to mount root from the SD card. Fix this up.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Cc: Stefan Hansson <newbyte@disroot.org>
Link: https://lore.kernel.org/r/20220205235312.446730-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx23-evk: Remove MX23_PAD_SSP1_DETECT from hog group

commit 42c9b28e6862d16db82a56f5667cf4d1f6658cf6 upstream.

Currently, SD card fails to mount due to the following pinctrl error:

[   11.170000] imx23-pinctrl 80018000.pinctrl: pin SSP1_DETECT already requested by 80018000.pinctrl; cannot claim for 80010000.spi
[   11.180000] imx23-pinctrl 80018000.pinctrl: pin-65 (80010000.spi) status -22
[   11.190000] imx23-pinctrl 80018000.pinctrl: could not request pin 65 (SSP1_DETECT) from group mmc0-pins-fixup.0  on device 80018000.pinctrl
[   11.200000] mxs-mmc 80010000.spi: Error applying setting, reverse things back

Fix it by removing the MX23_PAD_SSP1_DETECT pin from the hog group as it
is already been used by the mmc0-pins-fixup pinctrl group.

With this change the rootfs can be mounted and the imx23-evk board can
boot successfully.

Cc: <stable@vger.kernel.org>
Fixes: bc3875f1a61e ("ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Fix gfs2_release for non-writers regression

commit d3add1a9519dcacd6e644ecac741c56cf18b67f5 upstream.

When a file is opened for writing, the vfs code (do_dentry_open)
calls get_write_access for the inode, thus incrementing the inode's write
count. That writer normally then creates a multi-block reservation for
the inode (i_res) that can be re-used by other writers, which speeds up
writes for applications that stupidly loop on open/write/close.
When the writes are all done, the multi-block reservation should be
deleted when the file is closed by the last "writer."

Commit 0ec9b9ea4f83 broke that concept when it moved the call to
gfs2_rs_delete before the check for FMODE_WRITE.  Non-writers have no
business removing the multi-block reservations of writers. In fact, if
someone opens and closes the file for RO while a writer has a
multi-block reservation, the RO closer will delete the reservation
midway through the write, and this results in:

kernel BUG at fs/gfs2/rgrp.c:677! (or thereabouts) which is:
BUG_ON(rs->rs_requested); from function gfs2_rs_deltree.

This patch moves the check back inside the check for FMODE_WRITE.

Fixes: 0ec9b9ea4f83 ("gfs2: Check for active reservation in gfs2_release")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: eliminate unreliable __builtin_frame_address(1)

commit 6a00ef4493706a23120057fafbc62379bcde11ec upstream.

I tried different pieces of code which uses __builtin_frame_address(1)
(with both gcc version 7.5.0 and 10.3.0) to verify whether it works as
expected on riscv64. The result is negative.

What the compiler had generated is as below:
31                      fp = (unsigned long)__builtin_frame_address(1);
   0xffffffff80006024 <+200>:   ld      s1,0(s0)

It takes '0(s0)' as the address of frame 1 (caller), but the actual address
should be '-16(s0)'.

          |       ...       | <-+
          +-----------------+   |
          | return address  |   |
          | previous fp     |   |
          | saved registers |   |
          | local variables |   |
  $fp --> |       ...       |   |
          +-----------------+   |
          | return address  |   |
          | previous fp --------+
          | saved registers |
  $sp --> | local variables |
          +-----------------+

This leads the kernel can not dump the full stack trace on riscv.

[    7.222126][    T1] Call Trace:
[    7.222804][    T1] [<ffffffff80006058>] dump_backtrace+0x2c/0x3a

This problem is not exposed on most riscv builds just because the '0(s0)'
occasionally is the address frame 2 (caller's caller), if only ra and fp
are stored in frame 1 (caller).

          |       ...       | <-+
          +-----------------+   |
          | return address  |   |
  $fp --> | previous fp     |   |
          +-----------------+   |
          | return address  |   |
          | previous fp --------+
          | saved registers |
  $sp --> | local variables |
          +-----------------+

This could be a *bug* of gcc that should be fixed. But as noted in gcc
manual "Calling this function with a nonzero argument can have
unpredictable effects, including crashing the calling program.", let's
remove the '__builtin_frame_address(1)' in backtrace code.

With this fix now it can show full stack trace:
[   10.444838][    T1] Call Trace:
[   10.446199][    T1] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
[   10.447711][    T1] [<ffffffff800060ac>] show_stack+0x32/0x3e
[   10.448710][    T1] [<ffffffff80a005c0>] dump_stack_lvl+0x58/0x7a
[   10.449941][    T1] [<ffffffff80a005f6>] dump_stack+0x14/0x1c
[   10.450929][    T1] [<ffffffff804c04ee>] ubsan_epilogue+0x10/0x5a
[   10.451869][    T1] [<ffffffff804c092e>] __ubsan_handle_load_invalid_value+0x6c/0x78
[   10.453049][    T1] [<ffffffff8018f834>] __pagevec_release+0x62/0x64
[   10.455476][    T1] [<ffffffff80190830>] truncate_inode_pages_range+0x132/0x5be
[   10.456798][    T1] [<ffffffff80190ce0>] truncate_inode_pages+0x24/0x30
[   10.457853][    T1] [<ffffffff8045bb04>] kill_bdev+0x32/0x3c
...

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Fixes: eac2f3059e02 ("riscv: stacktrace: fix the riscv stacktrace when CONFIG_FRAME_POINTER enabled")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: cpu-hotplug: clear cpu from numa map when teardown

commit f40fe31c01445f31253b15bef2412b33ae31093b upstream.

There is numa_add_cpu() when cpus online, accordingly, there should be
numa_remove_cpu() when cpus offline.

Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Fixes: 4f0e8eef772e ("riscv: Add numa support for riscv64 platform")
Cc: stable@vger.kernel.org
[Palmer: Add missing NUMA include]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: fix build with binutils 2.38

commit 6df2a016c0c8a3d0933ef33dd192ea6606b115e3 upstream.

From version 2.38, binutils default to ISA spec version 20191213. This
means that the csr read/write (csrr*/csrw*) instructions and fence.i
instruction has separated from the `I` extension, become two standalone
extensions: Zicsr and Zifencei. As the kernel uses those instruction,
this causes the following build failure:

  CC      arch/riscv/kernel/vdso/vgettimeofday.o
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h: Assembler messages:
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'

The fix is to specify those extensions explicitely in -march. However as
older binutils version do not support this, we first need to detect
that.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Report deprecated x87 features in supported CPUID

[ Upstream commit e3bcfda012edd3564e12551b212afbd2521a1f68 ]

CPUID.(EAX=7,ECX=0):EBX.FDP_EXCPTN_ONLY[bit 6] and
CPUID.(EAX=7,ECX=0):EBX.ZERO_FCS_FDS[bit 13] are "defeature"
bits. Unlike most of the other CPUID feature bits, these bits are
clear if the features are present and set if the features are not
present. These bits should be reported in KVM_GET_SUPPORTED_CPUID,
because if these bits are set on hardware, they cannot be cleared in
the guest CPUID. Doing so would claim guest support for a feature that
the hardware doesn't support and that can't be efficiently emulated.

Of course, any software (e.g WIN87EM.DLL) expecting these features to
be present likely predates these CPUID feature bits and therefore
doesn't know to check for them anyway.

Aaron Lewis added the corresponding X86_FEATURE macros in
commit cbb99c0f5887 ("x86/cpufeatures: Add FDP_EXCPTN_ONLY and
ZERO_FCS_FDS"), with the intention of reporting these bits in
KVM_GET_SUPPORTED_CPUID, but I was unable to find a proposed patch on
the kvm list.

Opportunistically reordered the CPUID_7_0_EBX capability bits from
least to most significant.

Cc: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220204001348.2844660-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: VMX: Set vmcs.PENDING_DBG.BS on #DB in STI/MOVSS blocking shadow

[ Upstream commit b9bed78e2fa9571b7c983b20666efa0009030c71 ]

Set vmcs.GUEST_PENDING_DBG_EXCEPTIONS.BS, a.k.a. the pending single-step
breakpoint flag, when re-injecting a #DB with RFLAGS.TF=1, and STI or
MOVSS blocking is active.  Setting the flag is necessary to make VM-Entry
consistency checks happy, as VMX has an invariant that if RFLAGS.TF is
set and STI/MOVSS blocking is true, then the previous instruction must
have been STI or MOV/POP, and therefore a single-step #DB must be pending
since the RFLAGS.TF cannot have been set by the previous instruction,
i.e. the one instruction delay after setting RFLAGS.TF must have already
expired.

Normally, the CPU sets vmcs.GUEST_PENDING_DBG_EXCEPTIONS.BS appropriately
when recording guest state as part of a VM-Exit, but #DB VM-Exits
intentionally do not treat the #DB as "guest state" as interception of
the #DB effectively makes the #DB host-owned, thus KVM needs to manually
set PENDING_DBG.BS when forwarding/re-injecting the #DB to the guest.

Note, although this bug can be triggered by guest userspace, doing so
requires IOPL=3, and guest userspace running with IOPL=3 has full access
to all I/O ports (from the guest's perspective) and can crash/reboot the
guest any number of ways.  IOPL=3 is required because STI blocking kicks
in if and only if RFLAGS.IF is toggled 0=>1, and if CPL>IOPL, STI either
takes a #GP or modifies RFLAGS.VIF, not RFLAGS.IF.

MOVSS blocking can be initiated by userspace, but can be coincident with
a #DB if and only if DR7.GD=1 (General Detect enabled) and a MOV DR is
executed in the MOVSS shadow.  MOV DR #GPs at CPL>0, thus MOVSS blocking
is problematic only for CPL0 (and only if the guest is crazy enough to
access a DR in a MOVSS shadow).  All other sources of #DBs are either
suppressed by MOVSS blocking (single-step, code fetch, data, and I/O),
are mutually exclusive with MOVSS blocking (T-bit task switch), or are
already handled by KVM (ICEBP, a.k.a. INT1).

This bug was originally found by running tests[1] created for XSA-308[2].
Note that Xen's userspace test emits ICEBP in the MOVSS shadow, which is
presumably why the Xen bug was deemed to be an exploitable DOS from guest
userspace.  KVM already handles ICEBP by skipping the ICEBP instruction
and thus clears MOVSS blocking as a side effect of its "emulation".

[1] http://xenbits.xenproject.org/docs/xtf/xsa-308_2main_8c_source.html
[2] https://xenbits.xen.org/xsa/advisory-308.html

Reported-by: David Woodhouse <dwmw2@infradead.org>
Reported-by: Alexander Graf <graf@amazon.de>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220120000624.655815-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: SVM: Don't kill SEV guest if SMAP erratum triggers in usermode

[ Upstream commit cdf85e0c5dc766fc7fc779466280e454a6d04f87 ]

Inject a #GP instead of synthesizing triple fault to try to avoid killing
the guest if emulation of an SEV guest fails due to encountering the SMAP
erratum.  The injected #GP may still be fatal to the guest, e.g. if the
userspace process is providing critical functionality, but KVM should
make every attempt to keep the guest alive.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <20220120010719.711476-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCS

[ Upstream commit f80ae0ef089a09e8c18da43a382c3caac9a424a7 ]

Similar to MSR_IA32_VMX_EXIT_CTLS/MSR_IA32_VMX_TRUE_EXIT_CTLS,
MSR_IA32_VMX_ENTRY_CTLS/MSR_IA32_VMX_TRUE_ENTRY_CTLS pair,
MSR_IA32_VMX_TRUE_PINBASED_CTLS needs to be filtered the same way
MSR_IA32_VMX_PINBASED_CTLS is currently filtered as guests may solely rely
on 'true' MSR data.

Note, none of the currently existing Windows/Hyper-V versions are known
to stumble upon the unfiltered MSR_IA32_VMX_TRUE_PINBASED_CTLS, the change
is aimed at making the filtering future proof.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220112170134.1904308-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER

[ Upstream commit 7a601e2cf61558dfd534a9ecaad09f5853ad8204 ]

Enlightened VMCS v1 doesn't have VMX_PREEMPTION_TIMER_VALUE field,
PIN_BASED_VMX_PREEMPTION_TIMER is also filtered out already so it makes
sense to filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER too.

Note, none of the currently existing Windows/Hyper-V versions are known
to enable 'save VMX-preemption timer value' when eVMCS is in use, the
change is aimed at making the filtering future proof.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220112170134.1904308-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: eventfd: Fix false positive RCU usage warning

[ Upstream commit 6a0c61703e3a5d67845a4b275e1d9d7bc1b5aad7 ]

Fix the following false positive warning:
 =============================
 WARNING: suspicious RCU usage
 5.16.0-rc4+ #57 Not tainted
 -----------------------------
 arch/x86/kvm/../../../virt/kvm/eventfd.c:484 RCU-list traversed in non-reader section!!

 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 3 locks held by fc_vcpu 0/330:
  #0: ffff8884835fc0b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x88/0x6f0 [kvm]
  #1: ffffc90004c0bb68 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0x600/0x1860 [kvm]
  #2: ffffc90004c0c1d0 (&kvm->irq_srcu){....}-{0:0}, at: kvm_notify_acked_irq+0x36/0x180 [kvm]

 stack backtrace:
 CPU: 26 PID: 330 Comm: fc_vcpu 0 Not tainted 5.16.0-rc4+
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
 Call Trace:
  <TASK>
  dump_stack_lvl+0x44/0x57
  kvm_notify_acked_gsi+0x6b/0x70 [kvm]
  kvm_notify_acked_irq+0x8d/0x180 [kvm]
  kvm_ioapic_update_eoi+0x92/0x240 [kvm]
  kvm_apic_set_eoi_accelerated+0x2a/0xe0 [kvm]
  handle_apic_eoi_induced+0x3d/0x60 [kvm_intel]
  vmx_handle_exit+0x19c/0x6a0 [kvm_intel]
  vcpu_enter_guest+0x66e/0x1860 [kvm]
  kvm_arch_vcpu_ioctl_run+0x438/0x7f0 [kvm]
  kvm_vcpu_ioctl+0x38a/0x6f0 [kvm]
  __x64_sys_ioctl+0x89/0xc0
  do_syscall_64+0x3a/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Since kvm_unregister_irq_ack_notifier() does synchronize_srcu(&kvm->irq_srcu),
kvm->irq_ack_notifier_list is protected by kvm->irq_srcu. In fact,
kvm->irq_srcu SRCU read lock is held in kvm_notify_acked_irq(), making it
a false positive warning. So use hlist_for_each_entry_srcu() instead of
hlist_for_each_entry_rcu().

Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com>
Message-Id: <f98bac4f5052bad2c26df9ad50f7019e40434512.1643265976.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: dwmac-sun8i: use return val of readl_poll_timeout()

[ Upstream commit 9e0db41e7a0b6f1271cbcfb16dbf5b8641b4e440 ]

When readl_poll_timeout() timeout, we'd better directly use its return
value.

Before this patch:
[    2.145528] dwmac-sun8i: probe of 4500000.ethernet failed with error -14

After this patch:
[    2.138520] dwmac-sun8i: probe of 4500000.ethernet failed with error -110

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Fix build error due to PTR used in more places

[ Upstream commit fa62f39dc7e25fc16371b958ac59b9a6fd260bea ]

Use PTR_WD instead of PTR to avoid clashes with other parts.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: add the IGNORE_DEV_SUBNQN quirk for Intel P4500/P4600 SSDs

[ Upstream commit 25e58af4be412d59e056da65cc1cefbd89185bd2 ]

The Intel P4500/P4600 SSDs do not report a subsystem NQN despite claiming
compliance to a standards version where reporting one is required.

Add the IGNORE_DEV_SUBNQN quirk to not fail the initialization of a
second such SSDs in a system.

Signed-off-by: Zheng Wu <wu.zheng@intel.com>
Signed-off-by: Ye Jinhe <jinhe.ye@intel.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf: Always wake the parent event

[ Upstream commit 961c39121759ad09a89598ec4ccdd34ae0468a19 ]

When using per-process mode and event inheritance is set to true,
forked processes will create a new perf events via inherit_event() ->
perf_event_alloc(). But these events will not have ring buffers
assigned to them. Any call to wakeup will be dropped if it's called on
an event with no ring buffer assigned because that's the object that
holds the wakeup list.

If the child event is disabled due to a call to
perf_aux_output_begin() or perf_aux_output_end(), the wakeup is
dropped leaving userspace hanging forever on the poll.

Normally the event is explicitly re-enabled by userspace after it
wakes up to read the aux data, but in this case it does not get woken
up so the event remains disabled.

This can be reproduced when using Arm SPE and 'stress' which forks once
before running the workload. By looking at the list of aux buffers read,
it's apparent that they stop after the fork:

  perf record -e arm_spe// -vvv -- stress -c 1

With this patch applied they continue to be printed. This behaviour
doesn't happen when using systemwide or per-cpu mode.

Reported-by: Ruben Ayrapetyan <Ruben.Ayrapetyan@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211206113840.130802-2-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: gadget: don't try to disable ep0 in dwc2_hsotg_suspend

[ Upstream commit ac55d163855924aa5af9f1560977da8f346963c8 ]

Calling dwc2_hsotg_ep_disable on ep0 (in/out) will lead to the following
logs before returning -EINVAL:
dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called for ep0
dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called for ep0

To avoid these two logs while suspending, start disabling the endpoint
from the index 1, as done in dwc2_hsotg_udc_stop:

/* all endpoints should be shutdown */
for (ep = 1; ep < hsotg->num_of_eps; ep++) {
if (hsotg->eps_in[ep])
dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep);
if (hsotg->eps_out[ep])
dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep);
}

Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211207130101.270314-1-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Correct MPC split policy for DCN301

[ Upstream commit ac46d93235074a6c5d280d35771c23fd8620e7d9 ]

[Why]
DCN301 has seamless boot enabled. With MPC split enabled
at the same time, system will hang.

[How]
Revert MPC split policy back to "MPC_SPLIT_AVOID". Since we have
ODM combine enabled on DCN301, pipe split is not necessary here.

Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: hibernate: Remove register_nosave_region_late()

[ Upstream commit 33569ef3c754a82010f266b7b938a66a3ccf90a4 ]

It is an unused wrapper forcing kmalloc allocation for registering
nosave regions. Also, rename __register_nosave_region() to
register_nosave_region() now that there is no need for disambiguation.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: reduce unnecessary wakeups from eee sw timer

[ Upstream commit c74ead223deb88bdf18af8c772d7ca5a9b6c3c2b ]

Currently, on EEE capable platforms, if EEE SW timer is used, the SW
timer cause 1 wakeup/s even if the TX has successfully entered EEE.
Remove this unnecessary wakeup by only calling mod_timer() if we
haven't successfully entered EEE.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: myrs: Fix crash in error case

[ Upstream commit 4db09593af0b0b4d7d4805ebb3273df51d7cc30d ]

In myrs_detect(), cs->disable_intr is NULL when privdata->hw_init() fails
with non-zero. In this case, myrs_cleanup(cs) will call a NULL ptr and
crash the kernel.

[    1.105606] myrs 0000:00:03.0: Unknown Initialization Error 5A
[    1.105872] myrs 0000:00:03.0: Failed to initialize Controller
[    1.106082] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    1.110774] Call Trace:
[    1.110950]  myrs_cleanup+0xe4/0x150 [myrs]
[    1.111135]  myrs_probe.cold+0x91/0x56a [myrs]
[    1.111302]  ? DAC960_GEM_intr_handler+0x1f0/0x1f0 [myrs]
[    1.111500]  local_pci_probe+0x48/0x90

Link: https://lore.kernel.org/r/20220123225717.1069538-1-ztong0001@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Treat link loss as fatal error

[ Upstream commit c99b9b2301492b665b6e51ba6c06ec362eddcd10 ]

This event is raised when link is lost as specified in UFSHCI spec and that
means communication is not possible. Thus initializing UFS interface needs
to be done.

Make UFS driver considers Link Lost as fatal in the INT_FATAL_ERRORS
mask. This will trigger a host reset whenever a link lost interrupt occurs.

Link: https://lore.kernel.org/r/1642743475-54275-1-git-send-email-kwmad.kim@samsung.com
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Use generic error code in ufshcd_set_dev_pwr_mode()

[ Upstream commit ad6c8a426446873febc98140d81d5353f8c0825b ]

The return value of ufshcd_set_dev_pwr_mode() is passed to device PM
core. However, the function currently returns a SCSI result which the PM
core doesn't understand.  This might lead to unexpected behaviors in
userland; a platform reset was observed in Android.

Use a generic error code for SSU failures.

Link: https://lore.kernel.org/r/1642743182-54098-1-git-send-email-kwmad.kim@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix bogus FW crash for maxcpus=1

[ Upstream commit 62afb379a0fee7e9c2f9f68e1abeb85ceddf51b9 ]

According to the comment in check_fw_ready() we should not check the
IOP1_READY field in register SCRATCH_PAD_1 for 8008 or 8009 controllers.

However we check this very field in process_oq() for processing the highest
index interrupt vector. The highest interrupt vector is checked as the FW
is programmed to signal fatal errors through this irq.

Change that function to not check IOP1_READY for those mentioned
controllers, but do check ILA_READY in both cases.

The reason I assume that this was not hit earlier was because we always
allocated 64 MSI(X), and just did not pass the vector index check in
process_oq(), i.e.  the handler never ran for vector index 63.

Link: https://lore.kernel.org/r/1642508105-95432-1-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedf: Change context reset messages to ratelimited

[ Upstream commit 64fd4af6274eb0f49d29772c228fffcf6bde1635 ]

If FCoE is not configured, libfc/libfcoe keeps on retrying FLOGI and after
3 retries driver does a context reset and tries fipvlan again.  This leads
to context reset message flooding the logs. Hence ratelimit the message to
prevent flooding the logs.

Link: https://lore.kernel.org/r/20220117135311.6256-4-njavali@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedf: Fix refcount issue when LOGO is received during TMF

[ Upstream commit 5239ab63f17cee643bd4bf6addfedebaa7d4f41e ]

Hung task call trace was seen during LOGO processing.

[  974.309060] [0000:00:00.0]:[qedf_eh_device_reset:868]: 1:0:2:0: LUN RESET Issued...
[  974.309065] [0000:00:00.0]:[qedf_initiate_tmf:2422]: tm_flags 0x10 sc_cmd 00000000c16b930f op = 0x2a target_id = 0x2 lun=0
[  974.309178] [0000:00:00.0]:[qedf_initiate_tmf:2431]: portid=016900 tm_flags =LUN RESET
[  974.309222] [0000:00:00.0]:[qedf_initiate_tmf:2438]: orig io_req = 00000000ec78df8f xid = 0x180 ref_cnt = 1.
[  974.309625] host1: rport 016900: Received LOGO request while in state Ready
[  974.309627] host1: rport 016900: Delete port
[  974.309642] host1: rport 016900: work event 3
[  974.309644] host1: rport 016900: lld callback ev 3
[  974.313243] [0000:61:00.2]:[qedf_execute_tmf:2383]:1: fcport is uploading, not executing flush.
[  974.313295] [0000:61:00.2]:[qedf_execute_tmf:2400]:1: task mgmt command success...
[  984.031088] INFO: task jbd2/dm-15-8:7645 blocked for more than 120 seconds.
[  984.031136]       Not tainted 4.18.0-305.el8.x86_64 #1

[  984.031166] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  984.031209] jbd2/dm-15-8    D    0  7645      2 0x80004080
[  984.031212] Call Trace:
[  984.031222]  __schedule+0x2c4/0x700
[  984.031230]  ? unfreeze_partials.isra.83+0x16e/0x1a0
[  984.031233]  ? bit_wait_timeout+0x90/0x90
[  984.031235]  schedule+0x38/0xa0
[  984.031238]  io_schedule+0x12/0x40
[  984.031240]  bit_wait_io+0xd/0x50
[  984.031243]  __wait_on_bit+0x6c/0x80
[  984.031248]  ? free_buffer_head+0x21/0x50
[  984.031251]  out_of_line_wait_on_bit+0x91/0xb0
[  984.031257]  ? init_wait_var_entry+0x50/0x50
[  984.031268]  jbd2_journal_commit_transaction+0x112e/0x19f0 [jbd2]
[  984.031280]  kjournald2+0xbd/0x270 [jbd2]
[  984.031284]  ? finish_wait+0x80/0x80
[  984.031291]  ? commit_timeout+0x10/0x10 [jbd2]
[  984.031294]  kthread+0x116/0x130
[  984.031300]  ? kthread_flush_work_fn+0x10/0x10
[  984.031305]  ret_from_fork+0x1f/0x40

There was a ref count issue when LOGO is received during TMF. This leads to
one of the I/Os hanging with the driver. Fix the ref count.

Link: https://lore.kernel.org/r/20220117135311.6256-3-njavali@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedf: Add stag_work to all the vports

[ Upstream commit b70a99fd13282d7885f69bf1372e28b7506a1613 ]

Call trace seen when creating NPIV ports, only 32 out of 64 show online.
stag work was not initialized for vport, hence initialize the stag work.

WARNING: CPU: 8 PID: 645 at kernel/workqueue.c:1635 __queue_delayed_work+0x68/0x80
CPU: 8 PID: 645 Comm: kworker/8:1 Kdump: loaded Tainted: G IOE    --------- --
 4.18.0-348.el8.x86_64 #1
Hardware name: Dell Inc. PowerEdge MX740c/0177V9, BIOS 2.12.2 07/09/2021
Workqueue: events fc_lport_timeout [libfc]
RIP: 0010:__queue_delayed_work+0x68/0x80
Code: 89 b2 88 00 00 00 44 89 82 90 00 00 00 48 01 c8 48 89 42 50 41 81
f8 00 20 00 00 75 1d e9 60 24 07 00 44 89 c7 e9 98 f6 ff ff <0f> 0b eb
c5 0f 0b eb a1 0f 0b eb a7 0f 0b eb ac 44 89 c6 e9 40 23
RSP: 0018:ffffae514bc3be40 EFLAGS: 00010006
RAX: ffff8d25d6143750 RBX: 0000000000000202 RCX: 0000000000000002
RDX: ffff8d2e31383748 RSI: ffff8d25c000d600 RDI: ffff8d2e31383788
RBP: ffff8d2e31380de0 R08: 0000000000002000 R09: ffff8d2e31383750
R10: ffffffffc0c957e0 R11: ffff8d2624800000 R12: ffff8d2e31380a58
R13: ffff8d2d915eb000 R14: ffff8d25c499b5c0 R15: ffff8d2e31380e18
FS:  0000000000000000(0000) GS:ffff8d2d1fb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055fd0484b8b8 CR3: 00000008ffc10006 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
  queue_delayed_work_on+0x36/0x40
  qedf_elsct_send+0x57/0x60 [qedf]
  fc_lport_enter_flogi+0x90/0xc0 [libfc]
  fc_lport_timeout+0xb7/0x140 [libfc]
  process_one_work+0x1a7/0x360
  ? create_worker+0x1a0/0x1a0
  worker_thread+0x30/0x390
  ? create_worker+0x1a0/0x1a0
  kthread+0x116/0x130
  ? kthread_flush_work_fn+0x10/0x10
  ret_from_fork+0x35/0x40
 ---[ end trace 008f00f722f2c2ff ]--

Initialize stag work for all the vports.

Link: https://lore.kernel.org/r/20220117135311.6256-2-njavali@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: ufshcd-pltfrm: Check the return value of devm_kstrdup()

[ Upstream commit a65b32748f4566f986ba2495a8236c141fa42a26 ]

devm_kstrdup() returns pointer to allocated string on success, NULL on
failure. So it is better to check the return value of it.

Link: https://lore.kernel.org/r/tencent_4257E15D4A94FF9020DDCC4BB9B21C041408@qq.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: iscsi: Make sure the np under each tpg is unique

[ Upstream commit a861790afaa8b6369eee8a88c5d5d73f5799c0c6 ]

iscsit_tpg_check_network_portal() has nested for_each loops and is supposed
to return true when a match is found. However, the tpg loop will still
continue after existing the tpg_np loop. If this tpg_np is not the last the
match value will be changed.

Break the outer loop after finding a match and make sure the np under each
tpg is unique.

Link: https://lore.kernel.org/r/20220111054742.19582-1-mingzhe.zou@easystack.cn
Signed-off-by: ZouMingzhe <mingzhe.zou@easystack.cn>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/fixmap: Fix VM debug warning on unmap

[ Upstream commit aec982603aa8cc0a21143681feb5f60ecc69d718 ]

Unmapping a fixmap entry is done by calling __set_fixmap()
with FIXMAP_PAGE_CLEAR as flags.

Today, powerpc __set_fixmap() calls map_kernel_page().

map_kernel_page() is not happy when called a second time
for the same page.

WARNING: CPU: 0 PID: 1 at arch/powerpc/mm/pgtable.c:194 set_pte_at+0xc/0x1e8
CPU: 0 PID: 1 Comm: swapper Not tainted 5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty #682
NIP:  c0017cd4 LR: c00187f0 CTR: 00000010
REGS: e1011d50 TRAP: 0700   Not tainted  (5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty)
MSR:  00029032 <EE,ME,IR,DR,RI>  CR: 42000208  XER: 00000000

GPR00: c0165fec e1011e10 c14c0000 c0ee2550 ff800000 c0f3d000 00000000 c001686c
GPR08: 00001000 b00045a9 00000001 c0f58460 c0f50000 00000000 c0007e10 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
GPR24: 00000000 00000000 c0ee2550 00000000 c0f57000 00000ff8 00000000 ff800000
NIP [c0017cd4] set_pte_at+0xc/0x1e8
LR [c00187f0] map_kernel_page+0x9c/0x100
Call Trace:
[e1011e10] [c0736c68] vsnprintf+0x358/0x6c8 (unreliable)
[e1011e30] [c0165fec] __set_fixmap+0x30/0x44
[e1011e40] [c0c13bdc] early_iounmap+0x11c/0x170
[e1011e70] [c0c06cb0] ioremap_legacy_serial_console+0x88/0xc0
[e1011e90] [c0c03634] do_one_initcall+0x80/0x178
[e1011ef0] [c0c0385c] kernel_init_freeable+0xb4/0x250
[e1011f20] [c0007e34] kernel_init+0x24/0x140
[e1011f30] [c0016268] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
7fe3fb78 48019689 80010014 7c630034 83e1000c 5463d97e 7c0803a6 38210010
4e800020 81250000 712a0001 41820008 <0fe00000> 9421ffe0 93e1001c 48000030

Implement unmap_kernel_page() which clears an existing pte.

Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b0b752f6f6ecc60653e873f385c6f0dce4e9ab6a.1638789098.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: Clarify error message when qdisc kind is unknown

[ Upstream commit 973bf8fdd12f0e70ea351c018e68edd377a836d1 ]

When adding a tc rule with a qdisc kind that is not supported or not
compiled into the kernel, the kernel emits the following error: "Error:
Specified qdisc not found.". Found via tdc testing when ETS qdisc was not
compiled in and it was not obvious right away what the message meant
without looking at the kernel code.

Change the error message to be more explicit and say the qdisc kind is
unknown.

Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: panel-orientation-quirks: Add quirk for the 1Netbook OneXPlayer

[ Upstream commit d3cbc6e323c9299d10c8d2e4127c77c7d05d07b1 ]

The 1Netbook OneXPlayer uses a panel which has been mounted
90 degrees rotated. Add a quirk for this.

Signed-off-by: Raymond Jay Golo <rjgolo@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220113000619.90988-1-rjgolo@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: Fix deadlock on DSI device attach error

[ Upstream commit 0a3d12ab5097b1d045e693412e6b366b7e82031b ]

DSI device attach to DSI host will be done with host device's lock
held.

Un-registering host in "device attach" error path (ex: probe retry)
will result in deadlock with below call trace and non operational
DSI display.

Startup Call trace:
[   35.043036]  rt_mutex_slowlock.constprop.21+0x184/0x1b8
[   35.043048]  mutex_lock_nested+0x7c/0xc8
[   35.043060]  device_del+0x4c/0x3e8
[   35.043075]  device_unregister+0x20/0x40
[   35.043082]  mipi_dsi_remove_device_fn+0x18/0x28
[   35.043093]  device_for_each_child+0x68/0xb0
[   35.043105]  mipi_dsi_host_unregister+0x40/0x90
[   35.043115]  vc4_dsi_host_attach+0xf0/0x120 [vc4]
[   35.043199]  mipi_dsi_attach+0x30/0x48
[   35.043209]  tc358762_probe+0x128/0x164 [tc358762]
[   35.043225]  mipi_dsi_drv_probe+0x28/0x38
[   35.043234]  really_probe+0xc0/0x318
[   35.043244]  __driver_probe_device+0x80/0xe8
[   35.043254]  driver_probe_device+0xb8/0x118
[   35.043263]  __device_attach_driver+0x98/0xe8
[   35.043273]  bus_for_each_drv+0x84/0xd8
[   35.043281]  __device_attach+0xf0/0x150
[   35.043290]  device_initial_probe+0x1c/0x28
[   35.043300]  bus_probe_device+0xa4/0xb0
[   35.043308]  deferred_probe_work_func+0xa0/0xe0
[   35.043318]  process_one_work+0x254/0x700
[   35.043330]  worker_thread+0x4c/0x448
[   35.043339]  kthread+0x19c/0x1a8
[   35.043348]  ret_from_fork+0x10/0x20

Shutdown Call trace:
[  365.565417] Call trace:
[  365.565423]  __switch_to+0x148/0x200
[  365.565452]  __schedule+0x340/0x9c8
[  365.565467]  schedule+0x48/0x110
[  365.565479]  schedule_timeout+0x3b0/0x448
[  365.565496]  wait_for_completion+0xac/0x138
[  365.565509]  __flush_work+0x218/0x4e0
[  365.565523]  flush_work+0x1c/0x28
[  365.565536]  wait_for_device_probe+0x68/0x158
[  365.565550]  device_shutdown+0x24/0x348
[  365.565561]  kernel_restart_prepare+0x40/0x50
[  365.565578]  kernel_restart+0x20/0x70
[  365.565591]  __do_sys_reboot+0x10c/0x220
[  365.565605]  __arm64_sys_reboot+0x2c/0x38
[  365.565619]  invoke_syscall+0x4c/0x110
[  365.565634]  el0_svc_common.constprop.3+0xfc/0x120
[  365.565648]  do_el0_svc+0x2c/0x90
[  365.565661]  el0_svc+0x4c/0xf0
[  365.565671]  el0t_64_sync_handler+0x90/0xb8
[  365.565682]  el0t_64_sync+0x180/0x184

Signed-off-by: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220118005127.29015-1-treasure4paddy@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched: Avoid double preemption in __cond_resched_*lock*()

[ Upstream commit 7e406d1ff39b8ee574036418a5043c86723170cf ]

For PREEMPT/DYNAMIC_PREEMPT the *_unlock() will already trigger a
preemption, no point in then calling preempt_schedule_common()
*again*.

Use _cond_resched() instead, since this is a NOP for the preemptible
configs while it provide a preemption point for the others.

Reported-by: xuhaifeng <xuhaifeng@oppo.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YcGnvDEYBwOiV0cR@hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/perf: Avoid warning for Arch LBR without XSAVE

[ Upstream commit 8c16dc047b5dd8f7b3bf4584fa75733ea0dde7dc ]

Some hypervisors support Arch LBR, but without the LBR XSAVE support.
The current Arch LBR init code prints a warning when the xsave size (0) is
unexpected. Avoid printing the warning for the "no LBR XSAVE" case.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211215204029.150686-1-ak@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/rapl: fix AMD event handling

[ Upstream commit 0036fb00a756a2f6e360d44e2e3d2200a8afbc9b ]

The RAPL events exposed under /sys/devices/power/events should only reflect
what the underlying hardware actually support. This is how it works on Intel
RAPL and Intel core/uncore PMUs in general.
But on AMD, this was not the case. All possible RAPL events were advertised.

This is what it showed on an AMD Fam17h:
$ ls /sys/devices/power/events/
energy-cores        energy-gpu          energy-pkg          energy-psys
energy-ram          energy-cores.scale  energy-gpu.scale    energy-pkg.scale
energy-psys.scale   energy-ram.scale    energy-cores.unit   energy-gpu.unit
energy-pkg.unit     energy-psys.unit    energy-ram.unit

Yet, on AMD Fam17h, only energy-pkg is supported.

This patch fixes the problem. Given the way perf_msr_probe() works, the
amd_rapl_msrs[] table has to have all entries filled out and in particular
the group field, otherwise perf_msr_probe() defaults to making the event
visible.

With the patch applied, the kernel now only shows was is actually supported:

$ ls /sys/devices/power/events/
energy-pkg  energy-pkg.scale  energy-pkg.unit

The patch also uses the RAPL_MSR_MASK because only the 32-bits LSB of the
RAPL counters are relevant when reading power consumption.

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220105185659.643355-1-eranian@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/realtek-rtl: Service all pending interrupts

[ Upstream commit 960dd884ddf5621ae6284cd3a42724500a97ae4c ]

Instead of only servicing the lowest pending interrupt line, make sure
all pending SoC interrupts are serviced before exiting the chained
handler. This adds a small overhead if only one interrupt is pending,
but should prevent rapid re-triggering of the handler.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/5082ad3cb8b4eedf55075561b93eff6570299fe1.1641739718.git.sander@svanheule.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

sunrpc: Fix potential race conditions in rpc_sysfs_xprt_state_change()

[ Upstream commit 1a48db3fef499f615b56093947ec4b0d3d8e3021 ]

We need to use test_and_set_bit() when changing xprt state flags to
avoid potentially getting xps->xps_nactive out of sync.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sunrpc: fix reference count leaks in rpc_sysfs_xprt_state_change

[ Upstream commit 776d794f28c95051bc70405a7b1fa40115658a18 ]

The refcount leak issues take place in an error handling path. When the
3rd argument buf doesn't match with "offline", "online" or "remove", the
function simply returns -EINVAL and forgets to decrease the reference
count of a rpc_xprt object and a rpc_xprt_switch object increased by
rpc_sysfs_xprt_kobj_get_xprt() and
rpc_sysfs_xprt_kobj_get_xprt_switch(), causing reference count leaks of
both unused objects.

Fix this issue by jumping to the error handling path labelled with
out_put when buf matches none of "offline", "online" or "remove".

Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC allow for unspecified transport time in rpc_clnt_add_xprt

[ Upstream commit b8a09619a56334414cbd7f935a0796240d0cc07e ]

If the supplied argument doesn't specify the transport type, use the
type of the existing rpc clnt and its existing transport.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4 handle port presence in fs_location server string

[ Upstream commit a8d54baba7c65db2d3278873def61f8d3753d766 ]

An fs_location attribute returns a string that can be ipv4, ipv6,
or DNS name. An ip location can have a port appended to it and if
no port is present a default port needs to be set. If rpc_pton()
fails to parse, try calling rpc_uaddr2socaddr() that can convert
an universal address.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4 expose nfs_parse_server_name function

[ Upstream commit f5b27cc6761e27ee6387a24df1a99ca77b360fea ]

Make nfs_parse_server_name available outside of nfs4namespace.c.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.1 query for fs_location attr on a new file system

[ Upstream commit 1976b2b31462151403c9fc110204fcc2a77bdfd1 ]

Query the server for other possible trunkable locations for a given
file system on a 4.1+ mount.

v2:
-- added missing static to nfs4_discover_trunking,
reported by the kernel test robot

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4 store server support for fs_location attribute

[ Upstream commit 8a59bb93b7e3cca389af44781a429ac12ac49be6 ]

Define and store if server returns it supports fs_locations attribute
as a capability.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4 remove zero number of fs_locations entries error check

[ Upstream commit 90e12a3191040bd3854d3e236c35921e4e92a044 ]

Remove the check for the zero length fs_locations reply in the
xdr decoding, and instead check for that in the migration code.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.1: Fix uninitialised variable in devicenotify

[ Upstream commit b05bf5c63b326ce1da84ef42498d8e0e292e694c ]

When decode_devicenotify_args() exits with no entries, we need to
ensure that the struct cb_devicenotifyargs is initialised to
{ 0, NULL } in order to avoid problems in
nfs4_callback_devicenotify().

Reported-by: <rtm@csail.mit.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfs: nfs4clinet: check the return value of kstrdup()

[ Upstream commit fbd2057e5329d3502a27491190237b6be52a1cb6 ]

kstrdup() returns NULL when some internal memory errors happen, it is
better to check the return value of it so to catch the memory error in
time.

Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4 only print the label when its queried

[ Upstream commit 2c52c8376db7160a1dd8a681c61c9258405ef143 ]

When the bitmask of the attributes doesn't include the security label,
don't bother printing it. Since the label might not be null terminated,
adjust the printing format accordingly.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: change nfs_access_get_cached to only report the mask

[ Upstream commit b5e7b59c3480f355910f9d2c6ece5857922a5e54 ]

Currently the nfs_access_get_cached family of functions report a
'struct nfs_access_entry' as the result, with both .mask and .cred set.
However the .cred is never used.  This is probably good and there is no
guarantee that it won't be freed before use.

Change to only report the 'mask' - as this is all that is used or needed.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Propagate is_signed to expression

commit 097f1eefedeab528cecbd35586dfe293853ffb17 upstream.

During expression parsing, a new expression field is created which
should inherit the properties of the operands, such as size and
is_signed.

is_signed propagation was missing, causing spurious errors with signed
operands.  Add it in parse_expr() and parse_unary() to fix the problem.

Link: https://lkml.kernel.org/r/f4dac08742fd7a0920bf80a73c6c44042f5eaa40.1643319703.git.zanussi@kernel.org
Cc: stable@vger.kernel.org
Fixes: 100719dcef447 ("tracing: Add simple expression support to hist triggers")
Reported-by: Yordan Karadzhov <ykaradzhov@vmware.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215513
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal/drivers/int340x: Fix RFIM mailbox write commands

commit 2685c77b80a80c57e2a25a726b82fb31e6e212ab upstream.

The existing mail mechanism only supports writing of workload types.

However, mailbox command for RFIM (cmd = 0x08) also requires write
operation which is ignored. This results in failing to store RFI
restriction.

Fixint this requires enhancing mailbox writes for non workload
commands too, so remove the check for MBOX_CMD_WORKLOAD_TYPE_WRITE
in mailbox write to allow this other write commands to be supoorted.

At the same time, however, we have to make sure that there is no
impact on read commands, by avoiding to write anything into the
mailbox data register.

To properly implement that, add two separate functions for mbox read
and write commands for the processor thermal workload command type.
This helps to distinguish the read and write workload command types
from each other while sending mbox commands.

Fixes: 5d6fbc96bd36 ("thermal/drivers/int340x: processor_thermal: Export additional attributes")
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Cc: 5.14+ <stable@vger.kernel.org> # 5.14+
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: int340x: Limit Kconfig to 64-bit

commit 994a04a20b03128838ec0250a0e266aab24d23f1 upstream.

32-bit processors cannot generally access 64-bit MMIO registers
atomically, and it is unknown in which order the two halves of
this registers would need to be read:

drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c: In function 'send_mbox_cmd':
drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c:79:37: error: implicit declaration of function 'readq'; did you mean 'readl'? [-Werror=implicit-function-declaration]
   79 |                         *cmd_resp = readq((void __iomem *) (proc_priv->mmio_base + MBOX_OFFSET_DATA));
      |                                     ^~~~~
      |                                     readl

The driver already does not build for anything other than x86,
so limit it further to x86-64.

Fixes: aeb58c860dc5 ("thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responses")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responses

commit aeb58c860dc516794fdf7ff89d96ead2644d5889 upstream.

Some of the RFIM mail box command returns 64 bit values. So enhance
mailbox interface to return 64 bit values and use them for RFIM
commands.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 5d6fbc96bd36 ("thermal/drivers/int340x: processor_thermal: Export additional attributes")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal/drivers/int340x: Improve the tcc offset saving for suspend/resume

commit c4fcf1ada4ae63e0aab6afd19ca2e7d16833302c upstream.

When the driver resumes, the tcc offset is set back to its previous
value. But this only works if the value was user defined as otherwise
the offset isn't saved. This asymmetric logic is harder to maintain and
introduced some issues.

Improve the logic by saving the tcc offset in a suspend op, so the right
value is always restored after a resume.

Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pI andruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210909085613.5577-3-atenart@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSD: Fix the behavior of READ near OFFSET_MAX

commit 0cb4d23ae08c48f6bf3c29a8e5c4a74b8388b960 upstream.

Dan Aloni reports:
> Due to commit 8cfb9015280d ("NFS: Always provide aligned buffers to
> the RPC read layers") on the client, a read of 0xfff is aligned up
> to server rsize of 0x1000.
>
> As a result, in a test where the server has a file of size
> 0x7fffffffffffffff, and the client tries to read from the offset
> 0x7ffffffffffff000, the read causes loff_t overflow in the server
> and it returns an NFS code of EINVAL to the client. The client as
> a result indefinitely retries the request.

The Linux NFS client does not handle NFS?ERR_INVAL, even though all
NFS specifications permit servers to return that status code for a
READ.

Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed
and return a short result. Set the EOF flag in the result to prevent
the client from retrying the READ request. This behavior appears to
be consistent with Solaris NFS servers.

Note that NFSv3 and NFSv4 use u64 offset values on the wire. These
must be converted to loff_t internally before use -- an implicit
type cast is not adequate for this purpose. Otherwise VFS checks
against sb->s_maxbytes do not work properly.

Reported-by: Dan Aloni <dan.aloni@vastdata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSD: Fix offset type in I/O trace points

commit 6a4d333d540041d244b2fca29b8417bfde20af81 upstream.

NFSv3 and NFSv4 use u64 offset values on the wire. Record these values
verbatim without the implicit type case to loff_t.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSD: Clamp WRITE offsets

commit 6260d9a56ab352b54891ec66ab0eced57d55abc6 upstream.

Ensure that a client cannot specify a WRITE range that falls in a
byte range outside what the kernel's internal types (such as loff_t,
which is signed) can represent. The kiocb iterators, invoked in
nfsd_vfs_write(), should properly limit write operations to within
the underlying file system's s_maxbytes.

Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSD: Fix ia_size underflow

commit e6faac3f58c7c4176b66f63def17a34232a17b0e upstream.

iattr::ia_size is a loff_t, which is a signed 64-bit type. NFSv3 and
NFSv4 both define file size as an unsigned 64-bit type. Thus there
is a range of valid file size values an NFS client can send that is
already larger than Linux can handle.

Currently decode_fattr4() dumps a full u64 value into ia_size. If
that value happens to be larger than S64_MAX, then ia_size
underflows. I'm about to fix up the NFSv3 behavior as well, so let's
catch the underflow in the common code path: nfsd_setattr().

Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSD: Fix NFSv3 SETATTR/CREATE's handling of large file sizes

commit a648fdeb7c0e17177a2280344d015dba3fbe3314 upstream.

iattr::ia_size is a loff_t, so these NFSv3 procedures must be
careful to deal with incoming client size values that are larger
than s64_max without corrupting the value.

Silently capping the value results in storing a different value
than the client passed in which is unexpected behavior, so remove
the min_t() check in decode_sattr3().

Note that RFC 1813 permits only the WRITE procedure to return
NFS3ERR_FBIG. We believe that NFSv3 reference implementations
also return NFS3ERR_FBIG when ia_size is too large.

Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: Fix initialisation of nfs_client cl_flags field

commit 468d126dab45718feeb728319be20bd869a5eaa7 upstream.

For some long forgotten reason, the nfs_client cl_flags field is
initialised in nfs_get_client() instead of being initialised at
allocation time. This quirk was harmless until we moved the call to
nfs_create_rpc_client().

Fixes: dd99e9f98fbf ("NFSv4: Initialise connection to the server in nfs4_alloc_client()")
Cc: stable@vger.kernel.org # 4.8.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: marvell: Fix MDI-x polarity setting in 88e1118-compatible PHYs

commit aec12836e7196e4d360b2cbf20cf7aa5139ad2ec upstream.

When setting up autonegotiation for 88E1118R and compatible PHYs,
a software reset of PHY is issued before setting up polarity.
This is incorrect as changes of MDI Crossover Mode bits are
disruptive to the normal operation and must be followed by a
software reset to take effect. Let's patch m88e1118_config_aneg()
to fix the issue mentioned before by invoking software reset
of the PHY just after setting up MDI-x polarity.

Fixes: 605f196efbf8 ("phy: Add support for Marvell 88E1118 PHY")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: marvell: Fix RGMII Tx/Rx delays setting in 88e1121-compatible PHYs

commit fe4f57bf7b585dca58f1496c4e2481ecbae18126 upstream.

It is mandatory for a software to issue a reset upon modifying RGMII
Receive Timing Control and RGMII Transmit Timing Control bit fields of MAC
Specific Control register 2 (page 2, register 21) otherwise the changes
won't be perceived by the PHY (the same is applicable for a lot of other
registers). Not setting the RGMII delays on the platforms that imply it'
being done on the PHY side will consequently cause the traffic loss. We
discovered that the denoted soft-reset is missing in the
m88e1121_config_aneg() method for the case if the RGMII delays are
modified but the MDIx polarity isn't changed or the auto-negotiation is
left enabled, thus causing the traffic loss on our platform with Marvell
Alaska 88E1510 installed. Let's fix that by issuing the soft-reset if the
delays have been actually set in the m88e1121_config_aneg_rgmii_delays()
method.

Cc: stable@vger.kernel.org
Fixes: d6ab93364734 ("net: phy: marvell: Avoid unnecessary soft reset")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20220205203932.26899-1-Pavel.Parkhomenko@baikalelectronics.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: isotp: fix error path in isotp_sendmsg() to unlock wait queue

commit 8375dfac4f683e1b2c5956d919d36aeedad46699 upstream.

Commit 43a08c3bdac4 ("can: isotp: isotp_sendmsg(): fix TX buffer concurrent
access in isotp_sendmsg()") introduced a new locking scheme that may render
the userspace application in a locking state when an error is detected.
This issue shows up under high load on simultaneously running isotp channels
with identical configuration which is against the ISO specification and
therefore breaks any reasonable PDU communication anyway.

Fixes: 43a08c3bdac4 ("can: isotp: isotp_sendmsg(): fix TX buffer concurrent access in isotp_sendmsg()")
Link: https://lore.kernel.org/all/20220209073601.25728-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Cc: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: isotp: fix potential CAN frame reception race in isotp_rcv()

commit 7c759040c1dd03954f650f147ae7175476d51314 upstream.

When receiving a CAN frame the current code logic does not consider
concurrently receiving processes which do not show up in real world
usage.

Ziyang Xuan writes:

The following syz problem is one of the scenarios. so->rx.len is
changed by isotp_rcv_ff() during isotp_rcv_cf(), so->rx.len equals
0 before alloc_skb() and equals 4096 after alloc_skb(). That will
trigger skb_over_panic() in skb_put().

=======================================================
CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 5.16.0-rc8-syzkaller #0
RIP: 0010:skb_panic+0x16c/0x16e net/core/skbuff.c:113
Call Trace:
 <TASK>
 skb_over_panic net/core/skbuff.c:118 [inline]
 skb_put.cold+0x24/0x24 net/core/skbuff.c:1990
 isotp_rcv_cf net/can/isotp.c:570 [inline]
 isotp_rcv+0xa38/0x1e30 net/can/isotp.c:668
 deliver net/can/af_can.c:574 [inline]
 can_rcv_filter+0x445/0x8d0 net/can/af_can.c:635
 can_receive+0x31d/0x580 net/can/af_can.c:665
 can_rcv+0x120/0x1c0 net/can/af_can.c:696
 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5465
 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5579

Therefore we make sure the state changes and data structures stay
consistent at CAN frame reception time by adding a spin_lock in
isotp_rcv(). This fixes the issue reported by syzkaller but does not
affect real world operation.

Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/linux-can/d7e69278-d741-c706-65e1-e87623d9a8e8@huawei.com/T/
Link: https://lore.kernel.org/all/20220208200026.13783-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Reported-by: syzbot+4c63f36709a642f801c5@syzkaller.appspotmail.com
Reported-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Wait for command setting 'Power Off Notification' bit to complete

commit 379f56c24e698f14242f532b1d0a0f1747725e08 upstream.

SD card is allowed to signal busy on DAT0 up to 1s after the
CMD49. According to SD spec (version 6.0 section 5.8.1.3) first host
waits until busy of CMD49 is released and only then polls Power
Management Status register up to 1s until the card indicates ready to
power off.

Without waiting for busy before polling status register sometimes card
becomes unresponsive and system fails to suspend:

  [  205.907459] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  [  206.421274] sunxi-mmc 1c0f000.mmc: data error, sending stop command
  [  206.421321] sunxi-mmc 1c0f000.mmc: send stop command failed
  [  206.421347] mmc0: error -110 reading status reg of PM func
  [  206.421366] PM: dpm_run_callback(): mmc_bus_suspend+0x0/0x74 returns -110
  [  206.421402] mmcblk mmc0:aaaa: PM: failed to suspend async: error -110
  [  206.437064] PM: Some devices failed to suspend, or early wake event detected

Tested with Sandisk Extreme PRO A2 64GB on Allwinner A64 system.

Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Fixes: 2c5d42769038 ("mmc: core: Add support for Power Off Notification for SD cards")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220115121447.641524-1-andrej.skvortzov@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-of-esdhc: Check for error num after setting mask

commit 40c67c291a93f8846c4a972c9ef1b7ba4544c8d0 upstream.

Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.
And since the sdhci_setup_host() has already checked the return value of
the enable_dma, we need not check it in sdhci_resume_host() again.

Fixes: 5552d7ad596c ("mmc: sdhci-of-esdhc: set proper dma mask for ls104x chips")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220112083156.1124782-1-jiasheng@iscas.ac.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: Do not print policy rule with inactive LSM labels

commit 89677197ae709eb1ab3646952c44f6a171c9e74c upstream.

Before printing a policy rule scan for inactive LSM labels in the policy
rule. Inactive LSM labels are identified by args_p != NULL and
rule == NULL.

Fixes: 483ec26eed42 ("ima: ima/lsm policy rule loading logic bug fixes")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: <stable@vger.kernel.org> # v5.6+
Acked-by: Christian Brauner <brauner@kernel.org>
[zohar@linux.ibm.com: Updated "Fixes" tag]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: Allow template selection with ima_template[_fmt]= after ima_hash=

commit bb8e52e4906f148c2faf6656b5106cf7233e9301 upstream.

Commit c2426d2ad5027 ("ima: added support for new kernel cmdline parameter
ima_template_fmt") introduced an additional check on the ima_template
variable to avoid multiple template selection.

Unfortunately, ima_template could be also set by the setup function of the
ima_hash= parameter, when it calls ima_template_desc_current(). This causes
attempts to choose a new template with ima_template= or with
ima_template_fmt=, after ima_hash=, to be ignored.

Achieve the goal of the commit mentioned with the new static variable
template_setup_done, so that template selection requests after ima_hash=
are not ignored.

Finally, call ima_init_template_list(), if not already done, to initialize
the list of templates before lookup_template_desc() is called.

Reported-by: Guo Zihua <guozihua@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org
Fixes: c2426d2ad5027 ("ima: added support for new kernel cmdline parameter ima_template_fmt")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: Remove ima_policy file before directory

commit f7333b9572d0559e00352a926c92f29f061b4569 upstream.

The removal of ima_dir currently fails since ima_policy still exists, so
remove the ima_policy file before removing the directory.

Fixes: 4af4662fa4a9 ("integrity: IMA policy")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: fix reference leak in asymmetric_verify()

commit 926fd9f23b27ca6587492c3f58f4c7f4cd01dad5 upstream.

Don't leak a reference to the key if its algorithm is unknown.

Fixes: 947d70597236 ("ima: Support EC keys for signature verification")
Cc: <stable@vger.kernel.org> # v5.13+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

integrity: check the return value of audit_log_start()

commit 83230351c523b04ff8a029a4bdf97d881ecb96fc upstream.

audit_log_start() returns audit_buffer pointer on success or NULL on
error, so it is better to check the return value of it.

Fixes: 3323eec921ef ("integrity: IMA as an integrity service provider")
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.23

Link: https://lore.kernel.org/r/20220209191249.980911721@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Slade Watkins <slade@sladewatkins.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: improve size validations for received domain records

commit 9aa422ad326634b76309e8ff342c246800621216 upstream.

The function tipc_mon_rcv() allows a node to receive and process
domain_record structs from peer nodes to track their views of the
network topology.

This patch verifies that the number of members in a received domain
record does not exceed the limit defined by MAX_MON_DOMAIN, something
that may otherwise lead to a stack overflow.

tipc_mon_rcv() is called from the function tipc_link_proto_rcv(), where
we are reading a 32 bit message data length field into a uint16.  To
avert any risk of bit overflow, we add an extra sanity check for this in
that function.  We cannot see that happen with the current code, but
future designers being unaware of this risk, may introduce it by
allowing delivery of very large (> 64k) sk buffers from the bearer
layer.  This potential problem was identified by Eric Dumazet.

This fixes CVE-2022-0435

Reported-by: Samuel Page <samuel.page@appgate.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Fixes: 35c55c9877f8 ("tipc: add neighbor monitoring framework")
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Samuel Page <samuel.page@appgate.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: api - Move cryptomgr soft dependency into algapi

commit c6ce9c5831cae515d375a01b97ae1778689acf19 upstream.

The soft dependency on cryptomgr is only needed in algapi because
if algapi isn't present then no algorithms can be loaded.  This
also fixes the case where api is built-in but algapi is built as
a module as the soft dependency would otherwise get lost.

Fixes: 8ab23d547f65 ("crypto: api - Add softdep on cryptomgr")
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix SMB 3.11 posix extension mount failure

commit 9ca8581e79e51c57e60b3b8e3b89d816448f49fe upstream.

cifs client set 4 to DataLength of create_posix context, which mean
Mode variable of create_posix context is only available. So buffer
validation of ksmbd should check only the size of Mode except for
the size of Reserved variable.

Fixes: 8f77150c15f8 ("ksmbd: add buffer validation for SMB2_CREATE_CONTEXT")
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Steve French <smfrench@gmail.com>
Tested-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: Return error on SIDA memop on normal guest

commit 2c212e1baedcd782b2535a3f86bc491977677c0e upstream.

Refuse SIDA memops on guests which are not protected.
For normal guests, the secure instruction data address designation,
which determines the location we access, is not under control of KVM.

Fixes: 19e122776886 (KVM: S390: protvirt: Introduce instruction data area bounce buffer)
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Add Cortex-A510 CPU part definition

commit 53960faf2b731dd2f9ed6e1334634b8ba6286850 upstream.

Add the CPU Partnumbers for the new Arm designs.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1643120437-14352-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

moxart: fix potential use-after-free on remove path

commit bd2db32e7c3e35bd4d9b8bbff689434a50893546 upstream.

It was reported that the mmc host structure could be accessed after it
was freed in moxart_remove(), so fix this by saving the base register of
the device and using it instead of the pointer dereference.

Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Cc: Xin Xiong <xiongx18@fudan.edu.cn>
Cc: Xin Tan <tanxin.ctf@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: linux-mmc@vger.kernel.org
Cc: stable <stable@vger.kernel.org>
Reported-by: whitehat002 <hackyzh002@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220127071638.4057899-1-gregkh@linuxfoundation.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.22

Link: https://lore.kernel.org/r/20220207103802.280120990@linuxfoundation.org
Link: https://lore.kernel.org/r/20220207133903.595766086@linuxfoundation.org
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Slade Watkins <slade@sladewatkins.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>