Dmitry Shmidt [Thu, 16 Aug 2018 00:44:14 +0000 (17:44 -0700)]
gpio_keypad: Fix key reporting [1/1]
PD#172258: pio_keypad: Fix key reporting [1/1]
the following issues have been fixed :
1. didn't report any keys to userspace.
2. the push down of key is reported as push up.
3. no event is reported when press key for the first time.
adjust the key event value by changing the gpio flag for
atom board, as follows:
1. the event value "0" is replaced to "1" when push down.
2. the event value "1" is replaced to "0" when push up.
Change-Id: Ia207506df25ea604bce4b6ae9573a981fe664061
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Signed-off-by: Tellen Yu <tellen.yu@amlogic.com>
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
Yan Wang [Fri, 17 Aug 2018 11:03:13 +0000 (19:03 +0800)]
tee: G12B: workaroud for system stability.
PD#170391
G12B GTVs version generate SErr exception when BL32/TA run on A73.
Set BL32/TA affinity to core0(A53) temporarily.
Change-Id: Ib1326914ef164f379c6920b5643b07e4e152b30e
Signed-off-by: Yan Wang <yan.wang@amlogic.com>
Jian Xu [Fri, 24 Aug 2018 02:50:44 +0000 (10:50 +0800)]
dts: audio: fix spdif_a share buffer with i2s
PD#160888: dts: audio: fix spdif_a share buffer with i2s
Change-Id: I61f8f69d613d7bd1d52de173a13c43ceae21b80a
Signed-off-by: Sandy Luo <sandy.luo@amlogic.com>
wenfeng.guo [Wed, 15 Aug 2018 08:29:35 +0000 (16:29 +0800)]
di: remove unused txl register of dump di reg/mif
PD#171757: di: remove unused txl register of dump di reg/mif
1.add new debugfs:
cat /sys/kernel/debug/di/dumpreg
cat /sys/kernel/debug/di/dumpmif
2.move di_state to deinterlace_dbg
Change-Id: Ic183abd793b170519ccc20e9a546efdfd531c469
Signed-off-by: wenfeng.guo <wenfeng.guo@amlogic.com>
qi duan [Thu, 23 Aug 2018 10:00:35 +0000 (18:00 +0800)]
ethernet: clean the coverity errors of eth module
PD#166793: code defects in eth part
Change-Id: I5e9a4bc9ff3c89a2fff8fa000d2c33dc87f2492c
Signed-off-by: qi duan <qi.duan@amlogic.com>
qi duan [Thu, 23 Aug 2018 09:14:11 +0000 (17:14 +0800)]
UART: clean the coverity errors of UART module
PD#166793: code defects in UART part
Change-Id: Id2a379cc4d0ae7d463d835cad01be83793dba4ca
Signed-off-by: qi duan <qi.duan@amlogic.com>
Lianlian Zhu [Tue, 21 Aug 2018 14:05:09 +0000 (22:05 +0800)]
audio: solve av out voltage lower issue
PD#171873
Change-Id: I2fb1e3a70b3fa71b0ec4d5f8c528fead1e5cd009
Signed-off-by: Lianlian Zhu <lianlian.zhu@amlogic.com>
Long Yu [Mon, 11 Jun 2018 03:08:16 +0000 (11:08 +0800)]
emmc: fixed the timeout of flushing the cache
PD#168102: emmc: fixed the timeout of flushing the cache
Change-Id: I122ace6bd5fa7b1b74de642652a76df9dfb62873
Signed-off-by: Long Yu <long.yu@amlogic.com>
Zhe Wang [Tue, 21 Aug 2018 08:28:02 +0000 (16:28 +0800)]
audio: fixed frequency responds curve test fail[1/2]
PD#168797: -change hw resample filter parameters with input sr
in hdmiin and spdifin source
-optimize filter parameters
Change-Id: Ie48d55446b22b8f3dceff8be404ad52d7820f6e8
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Lei Yang [Wed, 8 Aug 2018 03:11:18 +0000 (11:11 +0800)]
hdmirx: add ddc idle detection before edid filling
PD#171215: hdmirx: add ddc idle detection before edid filling
1. add ddc idle detection
2. increase hpd low wait time to 350ms
Change-Id: I59e3bc52af09b41b8567a93d595c2b52233f170a
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
Evoke Zhang [Tue, 21 Aug 2018 05:12:33 +0000 (13:12 +0800)]
lcd: clear mute after driver reset
PD#172121: lcd: clear mute after driver reset
also update CONFIG AML_VOUT_FRAMERATE_AUTOMATION to AMLOGIC_VOUT_SERVE
Change-Id: I65309c6c3b43fabc4e95269114ad22d18d360a41
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Evoke Zhang [Tue, 26 Jun 2018 02:16:55 +0000 (10:16 +0800)]
lcd: update optical info struct name
PD#171986: lcd: update optical info struct name
Change-Id: I17b4381b7011a48491d3e127ceba8b08b7dcd197
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Nian Jing [Tue, 21 Aug 2018 02:10:31 +0000 (10:10 +0800)]
tvafe: add Variable initialization
PD#172153: fix complie error for some GCC version
Change-Id: I0f09bf4097dfea278c63d69e789ee99b016e84b2
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
zhiqiang.liang [Tue, 21 Aug 2018 08:53:08 +0000 (16:53 +0800)]
thermal: clean the coverity errors of thermal module
PD#166793: code defects in thermal part
Change-Id: Icd970eced2ed3bcd76a8baf15bf7b885d63d8d6a
Signed-off-by: zhiqiang.liang <zhiqiang.liang@amlogic.com>
zhiqiang.liang [Tue, 21 Aug 2018 08:44:23 +0000 (16:44 +0800)]
Clk: clean the coverity errors of clk module
PD#166793: code defects in clk part
Change-Id: Iee2753552c6f345ea78329833415e607b141d188
Signed-off-by: zhiqiang.liang <zhiqiang.liang@amlogic.com>
Evoke Zhang [Fri, 10 Aug 2018 05:58:03 +0000 (13:58 +0800)]
lcd: lcd_extern: add two i2c address support
PD#169249: lcd: lcd_extern: add two i2c address support
Change-Id: Ic67304cd32768f5800b3702c57527e152bb71916
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Evoke Zhang [Thu, 19 Apr 2018 08:10:34 +0000 (16:10 +0800)]
lcd: add auto test for panel color bar
PD#169249: lcd: add auto test for panel color bar
also add gp0_pll clktree for clk_path 1 used
Change-Id: I78d1e42e68bfb8f294247053fdae4bb09fc3077a
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
tao zeng [Thu, 16 Aug 2018 06:44:39 +0000 (02:44 -0400)]
mm: reduce codec cma pool size for 1GB platform [3/3]
PD#171358
Memory will allocation fail for driver and kernel on 1GB platform
sometimes. But meminfo show that there are many free CMA pages,
which can't be used by kernel and driver. High percentage of CMA
pages reducec memory space for unmovable pages. We need to reduce
cma pool size for small memory platform.
Change-Id: I671d68f54209e7d557b6e33e2100af0ff4da2073
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
tao zeng [Thu, 16 Aug 2018 06:42:12 +0000 (02:42 -0400)]
arm64: select HAVE_ARCH_VMAP_STACK by default [2/3]
PD#171358
On arm64, task stack is 16KB and need order 2 when create a task.
It's easy get a failed allocation result if memory is fragmentation
after long time of using. Using vmap to allocate task stack can help
to avoid this problem.
Change-Id: I3a8a3fbf626eb30e0e547ed0605be02bb3391e5a
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
Hang Cheng [Fri, 22 Jun 2018 11:47:20 +0000 (19:47 +0800)]
hdmirx: add feature of disable specific port
PD#162498: hdmirx: add feature of disable specific port
1.disable termination and hpd of specific port to avoid
interference to adjacent non-hdmi source
2.use dts to control this feature, disable feature by default
3.side effect: cec function of disabled port will not work
Change-Id: Ie52b187185277ee4e900b4de6db1da0da65bb1b9
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
Yong Qin [Mon, 20 Aug 2018 08:58:04 +0000 (16:58 +0800)]
hdmi: pkt: pktfifo not work after switch src
PD#172097: hdmi: pktfifo not work after switch src
1.pktinfo not work when exit hdmi source and re-enter
hdmi source.
Change-Id: I51f08529f38e93158e5c52a686472c5c3577e66b
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
xiaoliang.wang [Tue, 14 Aug 2018 22:23:11 +0000 (18:23 -0400)]
input: gpio_key: add some missing code [1/1]
PD#171750: google b/
112555582
add some missing code for send keyevent
Change-Id: I2586a0cd163c02b483657ade4e1a998d54f379d8
Signed-off-by: Shuide Chen <shuide.chen@amlogic.com>
Signed-off-by: xiaoliang.wang <xiaoliang.wang@amlogic.com>
Shunzhou Jiang [Mon, 20 Aug 2018 02:14:10 +0000 (10:14 +0800)]
clk: mpll: fix audio not sound issue
PD#170386: clk: fix audio not sound
Change-Id: I0396c6e2447162995964914fa7adb9f35ff651f0
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Zhi Zhou [Mon, 16 Jul 2018 03:29:16 +0000 (11:29 +0800)]
VIDEO_PTS: don't used the hardware register
PD#169889: don't used harware vpts/apts for avsync.
becuase this apts/vpts is hardware irrelevant.
so if we need this register, we need power on
the parser,but it is irrelevant in ATV/hdmi-in
mode.
Change-Id: I4bd218c228516c974027b61c3a094b536913312e
Signed-off-by: Zhi Zhou <zhi.zhou@amlogic.com>
Yonghui Yu [Thu, 16 Aug 2018 16:11:35 +0000 (00:11 +0800)]
init: wait emmc ready before root
PD#171658: init: wait emmc ready before root
A temporary ugly patch
Change-Id: I9a75fabf7460f92b0b9ae51992ac0d3c964798d2
Signed-off-by: Yonghui Yu <yonghui.yu@amlogic.com>
tao zeng [Fri, 17 Aug 2018 06:36:54 +0000 (14:36 +0800)]
ramdump: fix type error for status of watch dog node [1/1]
PD#165764
Change-Id: Ib3a92525eedeedaa7a451214279d526bb3daa71a
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
Yong Qin [Mon, 13 Aug 2018 11:48:58 +0000 (19:48 +0800)]
hdmi: cec: switch hdmi port cec not work
PD#171014: cec: hdmi source cec not work
Change-Id: I2198eb4f9bc17f9909b9d693b4f12945240a7239
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
frank zhao [Wed, 1 Aug 2018 03:31:55 +0000 (23:31 -0400)]
di: fix compile error when disable di
PD#171633: di: fix compile error when disable di
Change-Id: Ib7ff39d05b8575fc5094494611d698e81f470644
Signed-off-by: frank zhao <frank.zhao@amlogic.com>
jintao xu [Tue, 14 Aug 2018 11:10:23 +0000 (19:10 +0800)]
video: add hdr metadata and color aspects support
PD#167533
add hdr metadata and color aspects support
fix cts below test cases:
android.media.cts.DecoderTest#testH265HDR10StaticMetadata
android.media.cts.DecoderTest#testH264ColorAspects
android.media.cts.DecoderTest#testH265ColorAspects
android.media.cts.DecoderTest#testMPEG2ColorAspectsTV
Change-Id: I7a7f3b3d7ec1079c4b4094e3c6b9a14c5fe9d791
Signed-off-by: peter wang <peter.wang@amlogic.com>
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
Huan Biao [Thu, 2 Aug 2018 07:47:58 +0000 (15:47 +0800)]
thermal: support A32 driver
PD#169652: thermal: support A32 driver
Change-Id: Ic0d86782f1b10743435588080c1a1548ccd80e04
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
Jihong Sui [Wed, 15 Aug 2018 07:44:28 +0000 (15:44 +0800)]
deinterlace: txl: fix di abnormal when dtv on inverted screen
PD#171587: txl: fix di abnormal when dtv on inverted screen
Change-Id: I38a1d2c73b0dd961739a010b36e06bb1f51e7be8
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
yicheng shen [Tue, 26 Jun 2018 03:02:22 +0000 (11:02 +0800)]
hdmirx: add new hdcp14 key configuration method
PD#168660: hdmirx: add new hdcp14 key configuration method
set hdcp1.4 key via secure OS to protect the key
Change-Id: If455aebe1c7fb65b4b16e8cf3ba7a70cf20702ac
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Ao Xu [Wed, 15 Aug 2018 08:22:16 +0000 (04:22 -0400)]
clocksource: remove LOCAL_TIMER config in meson64_a32
PD#169652: clocksource: remove LOCAL_TIMER config in meson64_a32
use soc timer instead of local timer
Change-Id: Ie2fd614cc6978496474fefcd39f0f21136197f34
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
Ao Xu [Thu, 2 Aug 2018 08:50:14 +0000 (16:50 +0800)]
board: add A32 support for gxl&txlx
PD#169652: board: add A32 support for gxl&txlx
add dts for gxl&txlx
Change-Id: Id2e79c9d2611bc2fb84ee344568ed9276566e872
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
Shunzhou Jiang [Fri, 6 Jul 2018 05:02:34 +0000 (13:02 +0800)]
clk: fix 32bit system compatibility issue
PD#169833: clk: fix 32bit system compatibility issue
Change-Id: I3ded0352c88267275cb1f128f1bfb79618f2226c
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Ben Widawsky [Mon, 24 Jul 2017 03:46:39 +0000 (20:46 -0700)]
drm: Create a format/modifier blob
Updated blob layout (Rob, Daniel, Kristian, xerpi)
v2:
* Removed __packed, and alignment (.+)
* Fix indent in drm_format_modifier fields (Liviu)
* Remove duplicated modifier > 64 check (Liviu)
* Change comment about modifier (Liviu)
* Remove arguments to blob creation, use plane instead (Liviu)
* Fix data types (Ben)
* Make the blob part of uapi (Daniel)
v3:
Remove unused ret field.
Change i, and j to unsigned int (Emil)
v4:
Use plane->modifier_count instead of recounting (Daniel)
v5:
Rename modifiers to modifiers_property (Ville)
Use sizeof(__u32) instead to reflect UAPI nature (Ville)
Make BUILD_BUG_ON for blob header size
Change-Id: Ibb2490b0510cbae9b5f4252483f8b1531fddf73f
Cc: Rob Clark <robdclark@gmail.com>
Cc: Kristian H. Kristensen <hoegsberg@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <liviu@dudau.co.uk> (v2)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v3)
Signed-off-by: Daniel Stone <daniels@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170724034641.13369-2-ben@bwidawsk.net
Ben Widawsky [Mon, 24 Jul 2017 03:46:38 +0000 (20:46 -0700)]
drm: Plumb modifiers through plane init
This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.
This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.
v2: A minor addition from Daniel
v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)
v4: Minor comment adjustments (Liviu)
v5: Some new platforms added due to rebase
v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)
Change-Id: I717e6240f729902af34c1419140bbf0b8c0a421d
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Ville Syrjälä [Wed, 16 Nov 2016 11:33:16 +0000 (13:33 +0200)]
drm: Nuke modifier[1-3]
It has been suggested that having per-plane modifiers is making life
more difficult for userspace, so let's just retire modifier[1-3] and
use modifier[0] to apply to the entire framebuffer.
Obviosuly this means that if individual planes need different tiling
layouts and whatnot we will need a new modifier for each combination
of planes with different tiling layouts.
For a bit of extra backwards compatilbilty the kernel will allow
non-zero modifier[1+] but it require that they will match modifier[0].
This in case there's existing userspace out there that sets
modifier[1+] to something non-zero with planar formats.
Mostly a cocci job, with a bit of manual stuff mixed in.
@@
struct drm_framebuffer *fb;
expression E;
@@
- fb->modifier[E]
+ fb->modifier
@@
struct drm_framebuffer fb;
expression E;
@@
- fb.modifier[E]
+ fb.modifier
Change-Id: Iebf536e81ea538e157d57eebed1ae3f9b3d912ce
Cc: Kristian Høgsberg <hoegsberg@gmail.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Cc: dczaplejewicz@collabora.co.uk
Suggested-by: Kristian Høgsberg <hoegsberg@gmail.com>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479295996-26246-1-git-send-email-ville.syrjala@linux.intel.com
Daniel Vetter [Mon, 14 Nov 2016 11:58:23 +0000 (12:58 +0100)]
drm: Extract drm_mode_config.[hc]
And shuffle the kernel-doc structure a bit since drm_crtc.[hc] now
only contains CRTC-related functions and structures.
v2:
- rebase onto drm-misc
- don't forget to move drm_mode_config_cleanup.
- move 2 internal decls under the right heading (Chris)
Change-Id: Ia84e8ea0df4be681c2e6a7856e11ec4bf7edfcdb
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: sky zhou <sky.zhou@amlogic.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rob Clark [Sat, 5 Nov 2016 15:08:07 +0000 (11:08 -0400)]
drm: add helper for printing to log or seq_file
Sometimes it is nice not to duplicate equivalent printk() and
seq_printf() code.
v2: simplify things w/ va_format, and use dev_printk, docs
Change-Id: Idad43e786b5007cc4c794afaf04dd3ad03d58941
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478358492-30738-3-git-send-email-robdclark@gmail.com
Daniel Vetter [Wed, 9 Nov 2016 12:36:36 +0000 (13:36 +0100)]
drm_fourcc: Document linear modifier
Not setting the fb modifiers flag is something different from setting
the fb modifiers to 0 (which means explicitly linear). We kinda failed
to document that properly. Spotted by Kristian.
Change-Id: I165c4b32bcd2c329786aa05fac268b066a9af159
Cc: hoegsberg@google.com
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478694996-4200-1-git-send-email-daniel.vetter@ffwll.ch
Laurent Pinchart [Mon, 17 Oct 2016 22:41:12 +0000 (01:41 +0300)]
drm: WARN when calling drm_format_info() for an unsupported format
The format helpers have historically treated unsupported formats as part
of the default case, returning values that are likely wrong. We can't
change this behaviour now without risking breaking drivers in difficult
to detect ways, but we can WARN on unsupported formats to catch faulty
callers.
The only exception is the framebuffer_check() function that calls
drm_format_info() to validate the format passed from userspace. This is
a valid use case that shouldn't generate a warning.
Change-Id: I57ea2b59765006e9f160f0e85e77f019ab6b977a
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-5-git-send-email-laurent.pinchart@ideasonboard.com
Laurent Pinchart [Mon, 17 Oct 2016 22:41:10 +0000 (01:41 +0300)]
drm: Implement the drm_format_*() helpers as drm_format_info() wrappers
Turn the drm_format_*() helpers into wrappers around the drm_format_info
lookup function to centralize all format information in a single place.
Change-Id: I599e5a857b267f5ef24746991b7f3c25a9d92479
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-3-git-send-email-laurent.pinchart@ideasonboard.com
Chris Wilson [Mon, 17 Oct 2016 08:35:12 +0000 (09:35 +0100)]
drm/edid: Rename local variable block to edid
The "block" variable points to the entire edid, not individual blocks
despite it being named such.
Change-Id: Ief86411390d9368c6e179a65e11ffc0065fd3b7f
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161017083514.21772-1-chris@chris-wilson.co.uk
Stefan Agner [Tue, 11 Oct 2016 23:15:04 +0000 (16:15 -0700)]
drm/fb-helper: reject any changes to the fbdev
The current fbdev emulation does not allow to push back changes in
width, height or depth to KMS, hence reject any changes with an
error. This makes sure that fbdev ioctl's fail properly and user
space does not assume that changes succeeded.
Change-Id: Iaefb728b04d4599ef5bd6f32b37dd9dcab830989
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161011231504.17688-1-stefan@agner.ch
Laurent Pinchart [Mon, 17 Oct 2016 22:41:11 +0000 (01:41 +0300)]
drm: Use drm_format_info() in DRM core code
Replace calls to the drm_format_*() helper functions with direct use of
the drm_format_info structure. This improves efficiency by removing
duplicate lookups.
Change-Id: I731a8def0d5835d0488e3a100794a09790f4f9fc
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-4-git-send-email-laurent.pinchart@ideasonboard.com
Laurent Pinchart [Mon, 17 Oct 2016 22:41:09 +0000 (01:41 +0300)]
drm: Centralize format information
PD#170175: drm: Centralize format information
Various pieces of information about DRM formats (number of planes, color
depth, chroma subsampling, ...) are scattered across different helper
functions in the DRM core. Callers of those functions often need to
access more than a single parameter of the format, leading to
inefficiencies due to multiple lookups.
Centralize all format information in a data structure and create a
function to look up information based on the format 4CC.
Change-Id: I25dc415450c89e5eb69726b3dda521c5800c4d68
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-2-git-send-email-laurent.pinchart@ideasonboard.com
Chris Wilson [Fri, 21 Oct 2016 14:15:40 +0000 (15:15 +0100)]
drm: Use u64 for intermediate dotclock calculations
We have reached the era where monitor bandwidths now exceed 31bits in
frequency calculations, though as we stored them in kHz units we are
safe from overflow in the modelines for some time.
[ 48.723720] UBSAN: Undefined behaviour in ../drivers/gpu/drm/drm_modes.c:325:49
[ 48.726943] signed integer overflow:
[ 48.728503] 2240 * 1000000 cannot be represented in type 'int'
Change-Id: Ib0ab1c82e0f5fb9d11244a5dbc53b565e1179127
Reported-by: Martin Liška <marxin.liska@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98372
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161021141540.26837-1-chris@chris-wilson.co.uk
Ville Syrjälä [Mon, 26 Sep 2016 16:30:46 +0000 (19:30 +0300)]
drm: Add drm_rotation_90_or_270()
We have intel_rotation_90_or_270() in i915 to check if the rotation is
90 or 270 degrees. Similar checks are elsewhere in drm, so let's move
the helper into a central place and use it everwhere.
v2: Drop the BIT()
Convert all new intel_rotation_90_or_270() calls
Deal with superfluous code shuffling
Change-Id: I84d48ebfa010f7c28fad6e492fdda2bddd305ccf
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-2-git-send-email-ville.syrjala@linux.intel.com
Ao Xu [Fri, 10 Aug 2018 06:14:25 +0000 (02:14 -0400)]
Revert "Fix up non-directory creation in SGID directories"
This reverts commit
d2c7c52431819aa05d76fae77bb3f95dd0955da1.
Change-Id: I096cd7fd49ccad4bd032bb365211930fa1aa74d4
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
Peng Yixin [Fri, 27 Jul 2018 02:18:54 +0000 (10:18 +0800)]
codec_mm: fix some coverity error.
PD#170543: codec_mm: fix some coverity error.
fix some coverity error
Change-Id: Idf234f08bc6d7522fdeb04c14956d046c94012c4
Signed-off-by: Peng Yixin <yixin.peng@amlogic.com>
nengwen.chen [Fri, 10 Aug 2018 11:46:10 +0000 (19:46 +0800)]
atv_demod: add atv all band scan [8/8]
PD#171216: add atv all band scan
Change-Id: If5c0664a25206b9a330d05af04574da4a1e5e016
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
nengwen.chen [Tue, 7 Aug 2018 07:34:20 +0000 (15:34 +0800)]
atv_demod: modify atv audio state disable when search [1/1]
PD#171279: modify atv audio state disable when search
Change-Id: I15c3fddb77bfe1125dafd1f63f8a74ff141bf1df
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Jihong Sui [Fri, 10 Aug 2018 01:48:27 +0000 (09:48 +0800)]
dtv_demod: txl: fix dvbc can't lock
PD#169985: txl: fix dvbc can't lock
Change-Id: I6094cfb546832cc4c54dae4a065147a05d20c251
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Hang Cheng [Mon, 6 Aug 2018 12:06:08 +0000 (20:06 +0800)]
hdmirx: set rxsense sync with hpd for every port
PD#159499: hdmirx: set rxsense sync with hpd for every port
Change-Id: Ief053dc7772b12516153ef733d057a6b9a02aca2
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
Yi Zhou [Wed, 8 Aug 2018 08:45:26 +0000 (16:45 +0800)]
hdmitx: add dynamic hdr info to vpp
PD#171350: hdmitx: add dynamic hdr info to vpp
cat /sys/class/amhdmitx/amhdmitx/hdr_cap
cat /sys/class/display/vinfo
Change-Id: I0d42c33e33ccc1f8d56545df25efc2cc60e08f58
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Evoke Zhang [Tue, 7 Aug 2018 11:13:39 +0000 (19:13 +0800)]
lcd: mipi-dsi: optimize mipi read function for video mode
PD#171352: lcd: mipi-dsi: optimize mipi read function for video mode
Change-Id: I7fec036ad568c00ca3573feb3eb5d0544050bfb2
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Jianxin [Fri, 10 Aug 2018 10:59:46 +0000 (18:59 +0800)]
defconfig: remove WQ_WATCHDOG amd DETECT_HUNG_TASK
PD#171500
WQ_WATCHDOG amd DETECT_HUNG_TASK are debug options to detect task/workqueue are
blocked for a long time. Sometimes, error messages are misreported.
Change-Id: Ia898429359b2ff4c656b8b9b009c4a7fa1888931
Signed-off-by: Jianxin <jianxin.pan@amlogic.com>
Jianxin [Fri, 10 Aug 2018 10:54:11 +0000 (18:54 +0800)]
scritp: update merge check pl
PD#146811
':' and extral message folling PD#xxxx is not a must in line three
Change-Id: Ibe115f6a64bc267730020aaa52f8b21adb2f66a5
Signed-off-by: Jianxin <jianxin.pan@amlogic.com>
Ao Xu [Wed, 1 Aug 2018 11:56:37 +0000 (19:56 +0800)]
board: add CONFIG_ARM64_A32 and CONFIG_COMPAT
PD#169652: add CONFIG_ARM64_A32 and CONFIG_COMPAT
add CONFIG_ARM64_A32 support and add missing
CONFIG_COMPAT
Change-Id: Id041292cccd39618ba9932d123a219f0583fd4c5
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
Tong Li [Mon, 13 Aug 2018 02:26:52 +0000 (10:26 +0800)]
dts: Rename the dts name for u220.[2/2]
PD#171618: update dts name g12a_s905d2_u220 to g12a_s905y2_u220
Rename the dts name for u220.[2/2]
Change-Id: I3a9dde9210772bb50f26b68a884d7bdc6346752c
Signed-off-by: Tong Li <tong.li@amlogic.com>
live.li [Mon, 23 Jul 2018 01:33:48 +0000 (09:33 +0800)]
audio:fix dtv no sound output issue[3/3]
PD#170315: audio:fix dtv no sound output issue
add dtv patch in tsync
Change-Id: Idad75b7b3563a251e6bf96141b4d9b2314c2983b
Signed-off-by: live.li <live.li@amlogic.com>
shuze.ma [Thu, 19 Jul 2018 13:59:30 +0000 (21:59 +0800)]
osd: wait for vsync no need lock [1/1]
PD#170791
wait for vsync no need lock
Change-Id: I61f9090b03c3b1d6971265bd1aacf9740a6ce168
Signed-off-by: shuze.ma <shuze.ma@amlogic.com>
Jiyu Yang [Fri, 10 Aug 2018 03:56:03 +0000 (11:56 +0800)]
osd: fixed compile error on buildroot
PD#170791: osd: fixed compile error on buildroot
Change-Id: Ic2e9d2898b3e5596d18590c4323ac7a1c5599037
Signed-off-by: Jiyu Yang <Jiyu.Yang@amlogic.com>
Chuanzhi Wang [Thu, 26 Jul 2018 05:49:49 +0000 (13:49 +0800)]
dvb: add configuration items to control dvb module compilation. [1\2]
PD#169652: Kconfig: Add configuration items.
Change-Id: If5d0a987bda435975fb3a6fa7be26ff8f7099e6f
Signed-off-by: Chuanzhi Wang <chuanzhi.wang@amlogic.com>
Yong Qin [Wed, 8 Aug 2018 07:23:00 +0000 (15:23 +0800)]
cec: otp: support one touch play and enter source
PD#170723: cec: support otp and enter source
1.get wakeup reason from stick register
2.add get wakeup reason from wakeup
Change-Id: Idb0e56980569d3092fde971c0dcb73a4684bff0b
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Yong Qin [Wed, 8 Aug 2018 11:27:05 +0000 (19:27 +0800)]
cec: cec: auto power down function fail
PD#171408: cec: auto power down function fail
1.reason: set auto pw down, disabled cec function
Change-Id: I554b085345bc144e6ff4166aae8c2d9d6620c524
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Ruixuan Li [Thu, 14 Jun 2018 12:21:50 +0000 (20:21 +0800)]
emmc: upgrade gpt or ept based on priority
PD#168362: P211: emmc: upgrade gpt or ept based on priority
Change-Id: I0e7ea483ac5fc0a59ee24ae21d2e40e1c5d32465
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
frank zhao [Wed, 8 Aug 2018 13:43:28 +0000 (09:43 -0400)]
di: add mif enable after reset for g12
PD#171440: di: add mif enable after reset for g12
Change-Id: I61e3b7e96b88b8875d7de4948fa627c4882ab810
Signed-off-by: frank zhao <frank.zhao@amlogic.com>
Jiyu Yang [Tue, 31 Jul 2018 03:34:43 +0000 (11:34 +0800)]
osd: adjust render kthreads priority [1/1]
PD#170791: by default, it is SCHED_NORMAL.
https://android.googlesource.com/kernel/msm/+/
1a7a93bd33f48a369de29f6f2b56251127bf6ab4%5E!/
AOSP suggested to use SCHED_FIFO , 2, in Qcom platform.
there are another 2 sleeping point for osd_toggle_buffer.
need to adjust it still.
Change-Id: Ic94a4e1cfee218fc95b53358d2c2e72bbde7bfdd
Signed-off-by: Jiyu Yang <Jiyu.Yang@amlogic.com>
Ao Xu [Thu, 2 Aug 2018 06:48:41 +0000 (14:48 +0800)]
board: use do_div for divid operation
PD#169652: board: use do_div for divid operation
when dividend is 64bit number, divid operation should
use do_div, otherwise link stage will fail for 32bit
system.
Change-Id: Iff2fdc328e364cec6486ab64e2e0f630ccb8534d
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
Evoke Zhang [Thu, 2 Aug 2018 09:03:18 +0000 (17:03 +0800)]
backlight: add step power on support
PD#171081: backlight: add step power on support
default disable with bl_step_on_flag = 0.
change bl_step_on_flag to 1 to enable step_on function:
echo 1 >/sys/class/aml_bl/step_on
the brightness will be level_default first,
then come to the system brightness value.
Change-Id: I47ae56c0f814b2e0e5989b71f151ed84ffee795b
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
nengwen.chen [Mon, 6 Aug 2018 11:04:10 +0000 (19:04 +0800)]
atv_demod: add xtal config for tuner [1/3]
PD#171245: add xtal config for tuner
Change-Id: Id682294ea1e0de265df56509fa5fc4480212f7a7
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Theodore Ts'o [Sat, 28 Jul 2018 12:12:04 +0000 (08:12 -0400)]
ext4: fix check to prevent initializing reserved inodes
Commit
8844618d8aa7: "ext4: only look at the bg_flags field if it is
valid" will complain if block group zero does not have the
EXT4_BG_INODE_ZEROED flag set. Unfortunately, this is not correct,
since a freshly created file system has this flag cleared. It gets
almost immediately after the file system is mounted read-write --- but
the following somewhat unlikely sequence will end up triggering a
false positive report of a corrupted file system:
mkfs.ext4 /dev/vdc
mount -o ro /dev/vdc /vdc
mount -o remount,rw /dev/vdc
Instead, when initializing the inode table for block group zero, test
to make sure that itable_unused count is not too large, since that is
the case that will result in some or all of the reserved inodes
getting cleared.
This fixes the failures reported by Eric Whiteney when running
generic/230 and generic/231 in the the nojournal test case.
Change-Id: I3967036c1d84cc69798b7c948420735c623c9ae8
Fixes:
8844618d8aa7 ("ext4: only look at the bg_flags field if it is valid")
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ao Xu [Thu, 2 Aug 2018 07:42:02 +0000 (15:42 +0800)]
board: fix ioremap call fail issue
PD#169652: board: fix ioremap call fail issue
for arm 32, ioremap will check if page is mapped
Change-Id: Icb5dda1b9de06d32e47c82a6bc45b62873332487
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
Ao Xu [Wed, 1 Aug 2018 11:30:04 +0000 (19:30 +0800)]
board: fix stack overflow issue
PD#169652: board: fix stack overflow issue
it is better to use kmalloc to alloc buffer
instead of in stack buffer.
Change-Id: I6825d8acff19248f2f6c789ed2218af42ca4ffd3
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
libo [Wed, 8 Aug 2018 04:51:48 +0000 (12:51 +0800)]
wifi: fix broadcom pcie wifi driver use static buf failed
PD#171351: fix broadcom pcie wifi driver use static buf failed
Change-Id: I1ce8f0d96b1e2ecd5bbd5b3f9ac805c433d548a2
Signed-off-by: libo <bo.li@amlogic.com>
nengwen.chen [Wed, 8 Aug 2018 07:10:48 +0000 (15:10 +0800)]
dvb-core: recover dvb-core support dtmb in dvb v3 [1/1]
PD#170409: dvb-core: recover dvb-core support dtmb in dvb v3
Change-Id: I31c1ed779a92f3b7c19a1053eaf739d531a3b31e
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Yong Qin [Fri, 3 Aug 2018 01:02:00 +0000 (09:02 +0800)]
cec: add port info for mix mode
PD#170794: cec: add port info for mix mode
1.add port info for output and input mix mode
2.port number= input number + output number
3.r321 dts add 1 output number for mix mode
Change-Id: I17692f5fb4526b4f95474f5ea36c11213034724f
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Kaifu Hu [Fri, 3 Aug 2018 07:55:47 +0000 (15:55 +0800)]
hdmitx: hdmitx: add debug info
PD#170492: hdmitx: add debug info
1. add avi package info.
->echo avi_info > /sys/class/amhdmitx/amhdmitx0/debug
2. add vsif package info.
->echo dv_info > /sys/class/amhdmitx/amhdmitx0/debug
3. add drm package info.
->echo hdr_info > /sys/class/amhdmitx/amhdmitx0/debug
4. add audio info frame info.
->echo aud_info > /sys/class/amhdmitx/amhdmitx0/debug
5. add audio acr info.
->echo acr_info > /sys/class/amhdmitx/amhdmitx0/debug
6. add audio sample.
->echo aud_sample > /sys/class/amhdmitx/amhdmitx0/debug
7. add audio channel status.
->echo aud_chls > /sys/class/amhdmitx/amhdmitx0/debug
8. add audio info in sysfs config.
->cat /sys/class/amhdmitx/amhdmitx0/config
9. add gcp package.
-> echo gcp_info > /sys/class/amhdmitx/amhdmitx0/debug
Change-Id: If8e566a18edead21d659ce20e77c475d83287887
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
Chris Wilson [Tue, 14 Nov 2017 16:27:19 +0000 (16:27 +0000)]
BACKPORT:dma-buf/fence: Fix lock inversion within dma-fence-array
Ages ago Rob Clark noted,
"Currently with fence-array, we have a potential deadlock situation. If
we fence_add_callback() on an array-fence, the array-fence's lock is
acquired first, and in it's ->enable_signaling() callback, it will install
cbs on it's array-member fences, so the array-member's lock is acquired
second.
But in the signal path, the array-member's lock is acquired first, and
the array-fence's lock acquired second."
Rob proposed either extensive changes to dma-fence to unnest the
fence-array signaling, or to defer the signaling onto a workqueue. This
is a more refined version of the later, that should keep the latency
of the fence signaling to a minimum by using an irq-work, which is
executed asap.
Reported-by: Rob Clark <robdclark@gmail.com>
Suggested-by: Rob Clark <robdclark@gmail.com>
References:
1476635975-21981-1-git-send-email-robdclark@gmail.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114162719.30958-1-chris@chris-wilson.co.uk
Signed-off-by: Jiyu Yang <Jiyu.Yang@amlogic.com>
Change-Id: Ia08cb17615ff15b18c208cff2000d92344c9f399
Chris Wilson [Fri, 28 Jul 2017 21:29:51 +0000 (22:29 +0100)]
BACKPORT: dma-buf/sync_file: Allow multiple sync_files to wrap a single dma-fence
Up until recently sync_file were create to export a single dma-fence to
userspace, and so we could canabalise a bit insie dma-fence to mark
whether or not we had enable polling for the sync_file itself. However,
with the advent of syncobj, we do allow userspace to create multiple
sync_files for a single dma-fence. (Similarly, that the sw-sync
validation framework also started returning multiple sync-files wrapping
a single dma-fence for a syncpt also triggering the problem.)
This patch reverts my suggestion in commit
e24165537312
("dma-buf/sync_file: only enable fence signalling on poll()") to use a
single bit in the shared dma-fence and restores the sync_file->flags for
tracking the bits individually.
Reported-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Fixes:
f1e8c67123cf ("dma-buf/sw-sync: Use an rbtree to sort fences in the timeline")
Fixes:
e9083420bbac ("drm: introduce sync objects (v4)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170728212951.7818-1-chris@chris-wilson.co.uk
[astrachan: rediffed against changed context lines in 4.9]
Bug:
79383895
PD#170298 [1/3]
Change-Id: I70d1f19796c6cb33cd4c19e40276d7298aa4ba5d
Signed-off-by: Alistair Strachan <astrachan@google.com>
Yao.Liu [Fri, 13 Jul 2018 11:07:34 +0000 (19:07 +0800)]
video: support hdr new interface [3/4]
PD#170058: support hdr new interface
Change-Id: I45368f3651781078edbc4d86e5c2bb12afb53a7f
Signed-off-by: Yao.Liu <yao.liu@amlogic.com>
Yingyuan Zhu [Tue, 7 Aug 2018 06:07:39 +0000 (14:07 +0800)]
dts: update the gpio key node for atom and sei210
PD#170502: dts: update the gpio key node for atom and sei210
Change-Id: Ib92167c36c2a756a784494da5dbe73a13c63dff0
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
Victor Wan [Tue, 7 Aug 2018 06:45:33 +0000 (14:45 +0800)]
Revert "BACKPORT: dma-buf/sync_file: Allow multiple sync_files to wrap a single dma-fence"
This reverts commit
74fa0af47306baf118b32b7acdba4ae98eda7a7d.
The commit 74fa0af caused GPU driver loading failed.
Change-Id: I255eb6b7a26e3b00e4f11489ece49896ff004d79
Victor Wan [Tue, 7 Aug 2018 06:43:24 +0000 (14:43 +0800)]
Merge branch 'android-4.9' into amlogic-4.9-dev
Signed-off-by: Victor Wan <victor.wan@amlogic.com>
Conflicts:
drivers/md/dm-bufio.c
drivers/media/dvb-core/dvb_frontend.c
drivers/usb/dwc3/core.c
drivers/usb/gadget/function/f_fs.c
Xindong Xu [Mon, 9 Jul 2018 05:49:38 +0000 (13:49 +0800)]
dts: add dtsi for system as root [1/9]
PD#170278: dts: add dtsi for system as root
Change-Id: Ie2eda798ac17425ddaf73d90bc04a3d9fdb74ade
Signed-off-by: Xindong Xu <xindong.xu@amlogic.com>
Yi Zeng [Thu, 2 Aug 2018 06:22:04 +0000 (14:22 +0800)]
mtd: spifc: add spifc support for txl
PD#171041: mtd: spifc: add spifc support for txl
Change-Id: I487161c6e85e3b232ed0c3891784b5a37f6d878c
Signed-off-by: Yi Zeng <yi.zeng@amlogic.com>
MingLiang Dong [Mon, 6 Aug 2018 03:30:52 +0000 (11:30 +0800)]
amvecm: dnlp coverity fix
PD#171026: amvecm: dnlp coverity fix
1. fix dnlp coverity
2. add kernel auto make dnlp_alg.ko
Change-Id: Idafc02e95655a9970ad778820b33c044e87bb767
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Lei Qian [Mon, 6 Aug 2018 13:35:20 +0000 (21:35 +0800)]
dts:txlx_t962x_r311_720p: fix commit error[1/1]
PD#170749:dts:txlx_t962x_r311_720p: fix commit error
Change-Id: Ie2f8398fab203e752657d54c77ac5ffbe56abebc
Signed-off-by: Lei Qian <lei.qian@amlogic.com>
Lei Qian [Sat, 4 Aug 2018 06:53:40 +0000 (14:53 +0800)]
dts:txl:sync fb config with txlx
PD#171168:dts:txl:sync fb config with txlx
Change-Id: I17f2521c5c571258c249ed042dc2978ebb21a5f9
Signed-off-by: Lei Qian <lei.qian@amlogic.com>
Yong Qin [Mon, 6 Aug 2018 09:14:41 +0000 (17:14 +0800)]
cec: proble cec fail
PD#171266: cec: proble cec fail on sei 210 board
Change-Id: If45588072a6d700e0b90be4778cb73eed1deeb34
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Dezhi Kong [Wed, 1 Aug 2018 08:31:50 +0000 (16:31 +0800)]
di: optimize di pre mif config
PD#170980: di: optimize di pre mif config
1.add protect for di pre reset
2.add pre de done check when unreg
3.merge afbc hold line from alishan code
4.optimize pre mif enable sequence
Change-Id: I18851ad644aaee7c6c1d76c69f41a91f9599a36d
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
Lei Qian [Mon, 6 Aug 2018 05:10:55 +0000 (13:10 +0800)]
clk: fix txl crash issue
PD#169833: clk: fix txl crash issue
Revert "clk: fix 32bit system compatibility issue"
This reverts commit
e39e646127c08cc462cf5ecffbe34f0be630fd43.
Change-Id: I6c7af24e60a46bb386d64b794dd76fb2ec5db354
Signed-off-by: Lei Qian <lei.qian@amlogic.com>
jiamin ma [Fri, 22 Jun 2018 11:04:40 +0000 (19:04 +0800)]
unifykey: add secure node
PD#168660: secure hdcp1.4 key
echo key_name > name
cat secure
to query whether a key is secure
Change-Id: If416fc8f2946176ecc956b73f1c9e77a55f7e57b
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
hongmin hua [Thu, 2 Aug 2018 12:33:23 +0000 (20:33 +0800)]
cec: add the port info and connect status for audio system
PD#170794: cec: add the port info and connect status for audio system
Change-Id: I433788d4f5fcbb3164f894ebc0f6827dd47b0633
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
Signed-off-by: Xindong Xu <xindong.xu@amlogic.com>
hongmin hua [Tue, 5 Jun 2018 13:06:00 +0000 (21:06 +0800)]
hdmirx: add lock for top sw reset & edid size protect [1/2]
PD#170713: hdmirx: add lock for top sw reset & edid size protect
Change-Id: I97502324d01d2e99d3a30bb1829affef5d2c123b
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
MingLiang Dong [Wed, 1 Aug 2018 11:54:44 +0000 (19:54 +0800)]
amvecm: packet dnlp algorithm
PD#171026: amvecm: packet dnlp algorithm
Change-Id: I29dec857c1ca2eed47fd27f6cb3ec986daeaab6a
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Wencai You [Fri, 18 May 2018 14:36:23 +0000 (22:36 +0800)]
mm: decrease DEFAULT_TVP_SIZE_FOR_4K and reserved-memory
PD#166821: decrease DEFAULT_TVP_SIZE_FOR_4K and reserved-memory
DEFAULT_TVP_SIZE_FOR_4K to 192M
codec_mm_cma to 208M
ion_reserved to 78M
Change-Id: I2fd38f40c242ef531f8cf2226822bed4b0250a4f
Signed-off-by: Wencai You <wencai.you@amlogic.com>
Renjun Xu [Fri, 3 Aug 2018 05:54:52 +0000 (13:54 +0800)]
audio: fix adc3101 8ch PCM format support
PD#171085: fix adc3101 8ch PCM format support
For S400 & S420 board, please modify dts to enable adc3101 8ch PCM
please read following file:
Documentation/devicetree/bindings/amlogic/axg-adc3010-pcm.txt
Change-Id: I945441f80d269b167148ccf3d6c33093a20a4f2f
Signed-off-by: Renjun Xu <renjun.xu@amlogic.com>