drm/msm/dpu: set pdpu->is_rt_pipe early in dpu_plane_sspp_atomic_update()

[ Upstream commit 1d233b1cb149ec78c20fac58331b27bb460f9558 ]

The function dpu_plane_sspp_atomic_update() updates pdpu->is_rt_pipe
flag, but after the commit 854f6f1c653b ("drm/msm/dpu: update the qos
remap only if the client type changes") it sets the flag late, after all
the qos functions have updated QoS programming. Move the flag update
back to the place where it happened before the mentioned commit to let
the pipe be programmed according to its current RT/non-RT state.

Fixes: 854f6f1c653b ("drm/msm/dpu: update the qos remap only if the client type changes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/516239/
Link: https://lore.kernel.org/r/20221229191856.3508092-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: renesas: rzg2l: Fix configuring the GPIO pins as interrupts

[ Upstream commit 00dfe29887761405ccd23cc0aa07cb86623bb2b7 ]

On the RZ/G2UL SoC we have less number of pins compared to RZ/G2L and also
the pin configs are completely different. This patch makes sure we use the
appropriate pin configs for each SoC (which is passed as part of the OF
data) while configuring the GPIO pin as interrupts instead of using
rzg2l_gpio_configs[] for all the SoCs.

Fixes: bfc69bdbaad1 ("pinctrl: renesas: rzg2l: Add RZ/G2UL support")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102221815.273719-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/tegra: firewall: Check for is_addr_reg existence in IMM check

[ Upstream commit 1b5c09de25e8c08655c270a70e5e74e93b6bad1f ]

In the IMM opcode check, don't call is_addr_reg if it's not set.

Fixes: 8cc95f3fd35e ("drm/tegra: Add job firewall")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpu: host1x: Don't skip assigning syncpoints to channels

[ Upstream commit eb258cc1fd458e584082be987dbc6ec42668c05e ]

The code to write the syncpoint channel assignment register
incorrectly skips the write if hypervisor registers are not available.

The register, however, is within the guest aperture so remove the
check and assign syncpoints properly even on virtualized systems.

Fixes: c3f52220f276 ("gpu: host1x: Enable Tegra186 syncpoint protection")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpu: host1x: Fix mask for syncpoint increment register

[ Upstream commit 79aad29c7d2d2cd64790115d3a6ebac28c00a8ec ]

On Tegra186+, the syncpoint ID has 10 bits of space. To allow
using more than 256 syncpoints, fix the mask.

Fixes: 9abdd497cd0a ("gpu: host1x: Tegra234 device data and headers")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: mediatek: Initialize variable *buf to zero

[ Upstream commit 2e34f82ba214134ecf590fbe0cdbd87401645a8a ]

Coverity spotted that *buf is not initialized to zero in
mtk_pctrl_dbg_show. Using uninitialized variable *buf as argument to %s
when calling seq_printf. Fix this coverity by initializing *buf as zero.

Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118062036.26258-3-Guodong.Liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: mediatek: Initialize variable pullen and pullup to zero

[ Upstream commit a298c70a10c604a6b3df5a0aa56597b705ba0f6b ]

Coverity spotted that pullen and pullup is not initialized to zero in
mtk_pctrl_show_one_pin. The uninitialized variable pullen is used in
assignment statement "rsel = pullen;" in mtk_pctrl_show_one_pin, and
Uninitialized variable pullup is used when calling scnprintf. Fix this
coverity by initializing pullen and pullup as zero.

Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118062036.26258-2-Guodong.Liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: bcm2835: Remove of_node_put() in bcm2835_of_gpio_ranges_fallback()

[ Upstream commit 2d578dd27871372f7159dd3206149ec616700d87 ]

Remove wrong of_node_put() in bcm2835_of_gpio_ranges_fallback(),
there is no counterpart of_node_get() for it.

Fixes: d2b67744fd99 ("pinctrl: bcm2835: implement hook for missing gpio-ranges")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs: bugs fixes in timestamps buff alloc

[ Upstream commit 1693fef9e95dbe8ab767d208a02328fff13fbb94 ]

use argument instead of fixed GFP value for allocation
in Timestamps buffers alloc function.
change data type of size to size_t.

Fixes: 9158bf69e74f ("habanalabs: Timestamps buffers registration")
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/mdp5: Add check for kzalloc

[ Upstream commit 13fcfcb2a9a4787fe4e49841d728f6f2e9fa6911 ]

As kzalloc may fail and return NULL pointer,
it should be better to check the return value
in order to avoid the NULL pointer dereference.

Fixes: 1cff7440a86e ("drm/msm: Convert to using __drm_atomic_helper_crtc_reset() for reset.")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514154/
Link: https://lore.kernel.org/r/20221206074819.18134-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: Add check for pstates

[ Upstream commit 93340e10b9c5fc86730d149636e0aa8b47bb5a34 ]

As kzalloc may fail and return NULL pointer,
it should be better to check pstates
in order to avoid the NULL pointer dereference.

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514160/
Link: https://lore.kernel.org/r/20221206080236.43687-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: Add check for cstate

[ Upstream commit c96988b7d99327bb08bd9efd29a203b22cd88ace ]

As kzalloc may fail and return NULL pointer,
it should be better to check cstate
in order to avoid the NULL pointer dereference
in __drm_atomic_helper_crtc_reset.

Fixes: 1cff7440a86e ("drm/msm: Convert to using __drm_atomic_helper_crtc_reset() for reset.")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514163/
Link: https://lore.kernel.org/r/20221206080517.43786-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: use strscpy instead of strncpy

[ Upstream commit d7fd8634f48d76aa799ed57beb7d87dab91bde80 ]

Using strncpy can result in non-NULL-terminated destination string. Use
strscpy instead. This fixes following warning:

drivers/gpu/drm/msm/msm_fence.c: In function ‘msm_fence_context_alloc’:
drivers/gpu/drm/msm/msm_fence.c:25:9: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
   25 |         strncpy(fctx->name, name, sizeof(fctx->name));
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: f97decac5f4c ("drm/msm: Support multiple ringbuffers")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/518787/
Link: https://lore.kernel.org/r/20230118020152.1689213-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: sc7180: add missing WB2 clock control

[ Upstream commit 255f056181ac69278dcd8778f0be32a21b2d2a6a ]

Add missing DPU_CLK_CTRL_WB2 to sc7180_mdp clocks array.

Fixes: 51e4d60e6ba5 ("drm/msm/dpu: add writeback support for sc7180")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (sc7180)
Patchwork: https://patchwork.freedesktop.org/patch/518504/
Link: https://lore.kernel.org/r/20230116103055.780767-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096

[ Upstream commit 86bd0c4a2a5dc4265884648cb92c681646509692 ]

The Exynos UFS controller only supports scatter/gather list elements that
are aligned on a 4 KiB boundary. Fix DMA alignment in case PAGE_SIZE !=
4096. Rename UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE into
UFSHCD_QUIRK_4KB_DMA_ALIGNMENT.

Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Fixes: 2b2bfc8aa519 ("scsi: ufs: Introduce a quirk to allow only page-aligned sg entries")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: Allow 2 CTRLs on v2.5.0

[ Upstream commit 1ae654ded7c5a19dc13f57a4fe4434fef879b6f9 ]

v2.5.0 support was originally added for SC7280, but this hw is also
present on SM8350, which has one more DSI host. Bump up the dsi count
and fill in the register of the secondary host to allow it to probe.

This should not have any adverse effects on SC7280, as the secondary
CTRL will only be touched if it's defined, anyway.

Fixes: 65c391b31994 ("drm/msm/dsi: Add DSI support for SC7280")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/519513/
Link: https://lore.kernel.org/r/20230120210101.2146852-1-konrad.dybcio@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: exynos: dsi: Fix MIPI_DSI*_NO_* mode flags

[ Upstream commit 996e1defca34485dd2bd70b173f069aab5f21a65 ]

HFP/HBP/HSA/EOT_PACKET modes in Exynos DSI host specifies
0 = Enable and 1 = Disable.

The logic for checking these mode flags was correct before
the MIPI_DSI*_NO_* mode flag conversion.

This patch is trying to fix this MIPI_DSI*_NO_* mode flags handling
Exynos DSI host and update the mode_flags in relevant panel drivers.

Fixes: 0f3b68b66a6d ("drm/dsi: Add _NO_ to MIPI_DSI_* flags disabling features")
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reported-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221212145745.15387-1-jagan@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mipi-dsi: Fix byte order of 16-bit DCS set/get brightness

[ Upstream commit c9d27c6be518b4ef2966d9564654ef99292ea1b3 ]

The MIPI DCS specification demands that brightness values are sent in
big endian byte order. It also states that one parameter (i.e. one byte)
shall be sent/received for 8 bit wide values, and two parameters shall
be used for values that are between 9 and 16 bits wide.

Add new functions to properly handle 16-bit brightness in big endian,
since the two 8- and 16-bit cases are distinct from each other.

[richard: use separate functions instead of switch/case]
[richard: split into 16-bit component]

Fixes: 1a9d759331b8 ("drm/dsi: Implement DCS set/get display brightness")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Link: https://android.googlesource.com/kernel/msm/+/754affd62d0ee268c686c53169b1dbb7deac8550
[richard: fix 16-bit brightness_get]
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116224909.23884-2-mailingradian@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: tps65219: use IS_ERR() to detect an error pointer

[ Upstream commit 2bbba115c3c9a647bcb3201b014fcc3728fe75c8 ]

Fix pointer comparison to integer warning from gcc & sparse:

GCC:
../drivers/regulator/tps65219-regulator.c:370:26: warning: ordered comparison of pointer with integer zero [-Wextra]
  370 |                 if (rdev < 0) {
      |                          ^

sparse warning:
drivers/regulator/tps65219-regulator.c:370:26: sparse: error: incompatible types for operation (<):
drivers/regulator/tps65219-regulator.c:370:26: sparse:    struct regulator_dev *[assigned] rdev
drivers/regulator/tps65219-regulator.c:370:26: sparse:    int

Fixes: c12ac5fc3e0a ("regulator: drivers: Add TI TPS65219 PMIC regulators support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jerome Neanne <jneanne@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230114185736.2076-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: lt9611: pass a pointer to the of node

[ Upstream commit b0a7f8736789935f62d6df32d441cdf05a5c05d2 ]

Pass a pointer to the OF node while registering lt9611 MIPI device.

Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-7-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: lt9611: fix clock calculation

[ Upstream commit 2576eb26494eb0509dd9ceb0cd27771a7a5e3674 ]

Instead of having several fixed values for the pcr register, calculate
it before programming. This allows the bridge to support most of the
display modes.

Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-6-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: lt9611: fix programming of video modes

[ Upstream commit ad188aa47edaa033a270e1a3efae43836ff47569 ]

Program the upper part of the hfront_porch into the proper register.

Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-5-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: lt9611: fix polarity programming

[ Upstream commit 0b157efa384ea417304b1da284ee2f603c607fc3 ]

Fix programming of hsync and vsync polarities

Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-4-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: lt9611: fix HPD reenablement

[ Upstream commit a7790f6bd38f3642b60ae3504a2c749135b89451 ]

The driver will reset the bridge in the atomic_pre_enable(). However
this will also drop the HPD interrupt state. Instead of resetting the
bridge, properly wake it up. This fixes the HPD interrupt delivery after
the disable/enable cycle.

Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-3-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: lt9611: fix sleep mode setup

[ Upstream commit ae2d329f104b75a0a78dcaded29fe6283289cdf9 ]

On atomic_post_disable the bridge goes to the low power state. However
the code disables too much of the chip, so the HPD event is not being
detected and delivered to the host. Reduce the power saving in order to
get the HPD event.

Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-2-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: Disallow unallocated resources to be returned

[ Upstream commit abc40122d9a69f56c04efb5a7485795f5ac799d1 ]

In the event that the topology requests resources that have not been
created by the system (because they are typically not represented in
dpu_mdss_cfg ^1), the resource(s) in global_state (in this case DSC
blocks, until their allocation/assignment is being sanity-checked in
"drm/msm/dpu: Reject topologies for which no DSC blocks are available")
remain NULL but will still be returned out of
dpu_rm_get_assigned_resources, where the caller expects to get an array
containing num_blks valid pointers (but instead gets these NULLs).

To prevent this from happening, where null-pointer dereferences
typically result in a hard-to-debug platform lockup, num_blks shouldn't
increase past NULL blocks and will print an error and break instead.
After all, max_blks represents the static size of the maximum number of
blocks whereas the actual amount varies per platform.

^1: which can happen after a git rebase ended up moving additions to
_dpu_cfg to a different struct which has the same patch context.

Fixes: bb00a452d6f7 ("drm/msm/dpu: Refactor resource manager")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/517636/
Link: https://lore.kernel.org/r/20230109231556.344977-1-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/gem: Add check for kmalloc

[ Upstream commit d839f0811a31322c087a859c2b181e2383daa7be ]

Add the check for the return value of kmalloc in order to avoid
NULL pointer dereference in copy_from_user.

Fixes: 20224d715a88 ("drm/msm/submit: Move copy_from_user ahead of locking bos")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514678/
Link: https://lore.kernel.org/r/20221212091117.43511-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Use the sched from entity for amdgpu_cs trace

[ Upstream commit cf22ef78f22ce4df4757472c5dbd33c430c5b659 ]

The problem is that base sched hasn't been assigned yet at this moment,
causing something like "ring=0" all the time from trace.

mpv:cs0-3473    [002] ..... 129.047431: amdgpu_cs: ring=0, dw=48, fences=0
mpv:cs0-3473    [002] ..... 129.089125: amdgpu_cs: ring=0, dw=48, fences=0
mpv:cs0-3473    [002] ..... 129.130987: amdgpu_cs: ring=0, dw=48, fences=0
mpv:cs0-3473    [002] ..... 129.172478: amdgpu_cs: ring=0, dw=48, fences=0

Fixes: 4624459c84d7 ("drm/amdgpu: add gang submit frontend v6")
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/ca0132: minor fix for allocation size

[ Upstream commit 3ee0fe7fa39b14d1cea455b7041f2df933bd97d2 ]

Although the "dma_chan" pointer occupies more or equal space compared
to "*dma_chan", the allocation size should use the size of variable
itself.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 01ef7dbffb41 ("ALSA: hda - Update CA0132 codec to load DSP firmware binary")
Signed-off-by: Alexey V. Vissarionov <gremlin@altlinux.org>
Link: https://lore.kernel.org/r/20230117111522.GA15213@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup()

[ Upstream commit dbeedbcb268d055d8895aceca427f897e12c2b50 ]

Fix the below kernel panic due to null pointer access:
[   18.504431] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048
[   18.513464] Mem abort info:
[   18.516346]   ESR = 0x0000000096000005
[   18.520204]   EC = 0x25: DABT (current EL), IL = 32 bits
[   18.525706]   SET = 0, FnV = 0
[   18.528878]   EA = 0, S1PTW = 0
[   18.532117]   FSC = 0x05: level 1 translation fault
[   18.537138] Data abort info:
[   18.540110]   ISV = 0, ISS = 0x00000005
[   18.544060]   CM = 0, WnR = 0
[   18.547109] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000112826000
[   18.553738] [0000000000000048] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[   18.562690] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
**Snip**
[   18.696758] Call trace:
[   18.699278]  adreno_gpu_cleanup+0x30/0x88
[   18.703396]  a6xx_destroy+0xc0/0x130
[   18.707066]  a6xx_gpu_init+0x308/0x424
[   18.710921]  adreno_bind+0x178/0x288
[   18.714590]  component_bind_all+0xe0/0x214
[   18.718797]  msm_drm_bind+0x1d4/0x614
[   18.722566]  try_to_bring_up_aggregate_device+0x16c/0x1b8
[   18.728105]  __component_add+0xa0/0x158
[   18.732048]  component_add+0x20/0x2c
[   18.735719]  adreno_probe+0x40/0xc0
[   18.739300]  platform_probe+0xb4/0xd4
[   18.743068]  really_probe+0xfc/0x284
[   18.746738]  __driver_probe_device+0xc0/0xec
[   18.751129]  driver_probe_device+0x48/0x110
[   18.755421]  __device_attach_driver+0xa8/0xd0
[   18.759900]  bus_for_each_drv+0x90/0xdc
[   18.763843]  __device_attach+0xfc/0x174
[   18.767786]  device_initial_probe+0x20/0x2c
[   18.772090]  bus_probe_device+0x40/0xa0
[   18.776032]  deferred_probe_work_func+0x94/0xd0
[   18.780686]  process_one_work+0x190/0x3d0
[   18.784805]  worker_thread+0x280/0x3d4
[   18.788659]  kthread+0x104/0x1c0
[   18.791981]  ret_from_fork+0x10/0x20
[   18.795654] Code: f9400408 aa0003f3 aa1f03f4 91142015 (f9402516)
[   18.801913] ---[ end trace 0000000000000000 ]---
[   18.809039] Kernel panic - not syncing: Oops: Fatal exception

Fixes: 17e822f7591f ("drm/msm: fix unbalanced pm_runtime_enable in adreno_gpu_{init, cleanup}")
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/515605/
Link: https://lore.kernel.org/r/20221221203925.v2.1.Ib978de92c4bd000b515486aad72e96c2481f84d0@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358767: Set default CLRSIPO count

[ Upstream commit 01338bb82fed40a6a234c2b36a92367c8671adf0 ]

The current CLRSIPO count is still marginal and does not work with high
DSI clock rates in burst mode. Increase it further to allow the DSI link
to work at up to 1Gbps lane speed. This returns the counts to defaults
as provided by datasheet.

Fixes: ea6490b02240b ("drm/bridge: tc358767: increase CLRSIPO count")
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221016003556.406441-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_sai: initialize is_dsp_mode flag

[ Upstream commit a23924b7dd7b748fff8e305e1daf590fed2af21b ]

Initialize is_dsp_mode flag in the beginning of function
fsl_sai_set_dai_fmt_tr().

When the DAIFMT is DAIFMT_DSP_B the first time, is_dsp_mode is
true, then the second time DAIFMT is DAIFMT_I2S, is_dsp_mode
still true, which is a wrong state. So need to initialize
is_dsp_mode flag every time.

Fixes: a3f7dcc9cc03 ("ASoC: fsl-sai: Add SND_SOC_DAIFMT_DSP_A/B support.")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/1673852874-32200-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Fix clang warning

[ Upstream commit 2f5fab1b6c3a8efc93ba52c28539c45a8d0142ad ]

clang warning:

  drivers/scsi/qla2xxx/qla_edif_bsg.h:93:12: warning: field remote_pid
  within 'struct app_pinfo_req' is less aligned than 'port_id_t' and is
  usually due to 'struct app_pinfo_req' being packed, which can lead to
  unaligned accesses [-Wunaligned-access]
  port_id_t remote_pid;
        ^
  2 warnings generated.

Remove u32 field in remote_pid to silence warning.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 7ebb336e45ef ("scsi: qla2xxx: edif: Add start + stop bsgs")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix exchange oversubscription for management commands

[ Upstream commit 5f63a163ed2f12c34dd4ae9b2757962ec7bb86e5 ]

Add resource checking for management (non-I/O) commands.

Fixes: 89c72f4245a8 ("scsi: qla2xxx: Add IOCB resource tracking")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix exchange oversubscription

[ Upstream commit 41e5afe51f75f2858f5563145348f6c26d307b8f ]

In large environment, it is possible to experience command timeout and
escalation of path recovery. Currently the driver does not track the number
of exchanges/commands sent to FW. If there is a delay for commands at the
head of the queue, then this will create back pressure for commands at the
back of the queue.

Check for exchange availability before command submission.

Fixes: 89c72f4245a8 ("scsi: qla2xxx: Add IOCB resource tracking")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel-edp: fix name for IVO product id 854b

[ Upstream commit 9cce08cadc6ce8670280d0a042cf0b6d2987d9f9 ]

The actual name is R133NW4K-R0.

Fixes: 0f9fa5f58c78 ("drm/panel-edp: add IVO M133NW4J-R3 panel entry")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221231142721.338643-1-abel.vesa@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: clean event_thread->worker in case of an error

[ Upstream commit c79bb6b92defdcb834ceeeed9c1cf591beb1b71a ]

If worker creation fails, nullify the event_thread->worker, so that
msm_drm_uninit() doesn't try accessing invalid memory location. While we
are at it, remove duplicate assignment to the ret variable.

Fixes: 1041dee2178f ("drm/msm: use kthread_create_worker instead of kthread_run")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/490106/
Link: https://lore.kernel.org/r/20220617233328.1143665-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hdmi: Correct interlaced timings again

[ Upstream commit 771d6539f27bd55f43d8a95d53a7eeaaffa2681c ]

The back porch timings were correct, only the sync offset was wrong.
Correct timing is now reported for 1080i and 576i, but the h offset is
incorrect for 480i for non-obvious reasons.

Fixes: fb10dc451c0f ("drm/vc4: hdmi: Correct HDMI timing registers for interlaced modes")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-14-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hvs: Fix colour order for xRGB1555 on HVS5

[ Upstream commit 902973dc1a049c0d7bf0c222b8f2b3876f01b4a2 ]

Same as the xRGB8888 formats, HVS5 has managed to swap the colour
channels for the xRGB1555 formats as well. Add the relevant
config for pixel_order_hvs5.

Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-6-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hvs: Correct interrupt masking bit assignment for HVS5

[ Upstream commit 87551ec650bb87d35f1b29bba6a2430896e08da0 ]

HVS5 has moved the interrupt enable bits around within the
DISPCTRL register, therefore the configuration has to be updated
to account for this.

Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-4-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hvs: SCALER_DISPBKGND_AUTOHS is only valid on HVS4

[ Upstream commit 982ee94486863a41c6af9f2ab3f6681f72bc5c48 ]

The bit used for SCALER_DISPBKGND_AUTOHS in SCALER_DISPBKGNDX
has been repurposed on HVS5 to configure whether a display can
win back-to-back arbitration wins for the COB.

This is not desirable, therefore only select this bit on HVS4,
and explicitly clear it on HVS5.

Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-3-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hvs: Set AXI panic modes

[ Upstream commit df993fced230daa8452892406f3180c93ebf7e7b ]

The HVS can change AXI request mode based on how full the COB
FIFOs are.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.

With HVS channel 2 now being used for live video, change the
panic mode for all channels to be explicitly set by the driver,
and the same for all channels.

Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-2-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: rockchip: Fix refcount leak in rockchip_pinctrl_parse_groups

[ Upstream commit c818ae563bf99457f02e8170aabd6b174f629f65 ]

of_find_node_by_phandle() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: d3e5116119bd ("pinctrl: add pinctrl driver for Rockchip SoCs")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20230102112845.3982407-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: stm32: Fix refcount leak in stm32_pctrl_get_irq_domain

[ Upstream commit dcef18c8ac40aa85bb339f64c1dd31dd458b06fb ]

of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: d86f4d71e42a ("pinctrl: stm32: check irq controller availability at probe")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20230102082503.3944927-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: qcom: pinctrl-msm8976: Correct function names for wcss pins

[ Upstream commit a7cc0e2685082a0d79baec02df184dfa83cbfac3 ]

Adjust names of function for wcss pins, also fix third gpio in bt group.

Fixes: bcd11493f0ab ("pinctrl: qcom: Add a pinctrl driver for MSM8976 and 8956")
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20221231164250.74550-1-a39.skl@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/hdmi: Add missing check for alloc_ordered_workqueue

[ Upstream commit afe4cb96153a0d8003e4e4ebd91b5c543e10df84 ]

Add check for the return value of alloc_ordered_workqueue as it may return
NULL pointer and cause NULL pointer dereference in `hdmi_hdcp.c` and
`hdmi_hpd.c`.

Fixes: c6a57a50ad56 ("drm/msm/hdmi: add hdmi hdcp support (V3)")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/517211/
Link: https://lore.kernel.org/r/20230106023011.3985-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: check for null return of devm_kzalloc() in dpu_writeback_init()

[ Upstream commit 21e9a838f505178e109ccb3bf19d7808eb0326f4 ]

Because of the possilble failure of devm_kzalloc(), dpu_wb_conn might
be NULL and will cause null pointer dereference later.

Therefore, it might be better to check it and directly return -ENOMEM.

Fixes: 77b001acdcfe ("drm/msm/dpu: add the writeback connector layer")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/512277/
Link: https://lore.kernel.org/r/20221119055518.179937-1-tanghui20@huawei.com
[DB: fixed typo in commit message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (ftsteutates) Fix scaling of measurements

[ Upstream commit ca8fd8c16a8b77dfcf7f6ce52d2c863220693a78 ]

A user complained that the ftsteutates driver was displaying
bogus values since its introduction. This happens because the
sensor measurements need to be scaled in order to produce
meaningful results:
- the fan speed needs to be multiplied by 60 since its in RPS
- the temperature is in degrees celsius and needs an offset of 64
- the voltage is in 1/256 of 3.3V

The offical datasheet says the voltage needs to be divided by 256,
but this is likely an off-by-one-error, since even the BIOS
devides by 255 (otherwise 3.3V could not be measured).

The voltage channels additionally need a board-specific multiplier,
however this can be done by the driver since its board-specific.

The reason the missing scaling of measurements is the way Fujitsu
used this driver when it was still out-of-tree. Back then, all
scaling was done in userspace by libsensors, even the generic one.

Tested on a Fujitsu DS3401-B1.

Fixes: 08426eda58e0 ("hwmon: Add driver for FTS BMC chip "Teutates"")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20221224041855.83981-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: drop all currently held locks if deadlock happens

[ Upstream commit 479d4f0be4237ba33bc9432787aeb62c90e30f95 ]

If vc4_hdmi_reset_link() returns -EDEADLK, it means that a deadlock
happened in the locking context. This situation should be addressed by
dropping all currently held locks and block until the contended lock
becomes available. Currently, vc4 is not dealing with the deadlock
properly, producing the following output when PROVE_LOCKING is enabled:

[  825.612809] ------------[ cut here ]------------
[  825.612852] WARNING: CPU: 1 PID: 116 at drivers/gpu/drm/drm_modeset_lock.c:276 drm_modeset_drop_locks+0x60/0x68 [drm]
[  825.613458] Modules linked in: 8021q mrp garp stp llc
raspberrypi_cpufreq brcmfmac brcmutil crct10dif_ce hci_uart cfg80211
btqca btbcm bluetooth vc4 raspberrypi_hwmon snd_soc_hdmi_codec cec
clk_raspberrypi ecdh_generic drm_display_helper ecc rfkill
drm_dma_helper drm_kms_helper pwm_bcm2835 bcm2835_thermal bcm2835_rng
rng_core i2c_bcm2835 drm fuse ip_tables x_tables ipv6
[  825.613735] CPU: 1 PID: 116 Comm: kworker/1:2 Tainted: G        W 6.1.0-rc6-01399-g941aae326315 #3
[  825.613759] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[  825.613777] Workqueue: events output_poll_execute [drm_kms_helper]
[  825.614038] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  825.614063] pc : drm_modeset_drop_locks+0x60/0x68 [drm]
[  825.614603] lr : drm_helper_probe_detect+0x120/0x1b4 [drm_kms_helper]
[  825.614829] sp : ffff800008313bf0
[  825.614844] x29: ffff800008313bf0 x28: ffffcd7778b8b000 x27: 0000000000000000
[  825.614883] x26: 0000000000000001 x25: 0000000000000001 x24: ffff677cc35c2758
[  825.614920] x23: ffffcd7707d01430 x22: ffffcd7707c3edc7 x21: 0000000000000001
[  825.614958] x20: 0000000000000000 x19: ffff800008313c10 x18: 000000000000b6d3
[  825.614995] x17: ffffcd777835e214 x16: ffffcd7777cef870 x15: fffff81000000000
[  825.615033] x14: 0000000000000000 x13: 0000000000000099 x12: 0000000000000002
[  825.615070] x11: 72917988020af800 x10: 72917988020af800 x9 : 72917988020af800
[  825.615108] x8 : ffff677cc665e0a8 x7 : d00a8c180000110c x6 : ffffcd77774c0054
[  825.615145] x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000
[  825.615181] x2 : ffff677cc55e1880 x1 : ffffcd7777cef8ec x0 : ffff800008313c10
[  825.615219] Call trace:
[  825.615232]  drm_modeset_drop_locks+0x60/0x68 [drm]
[  825.615773]  drm_helper_probe_detect+0x120/0x1b4 [drm_kms_helper]
[  825.616003]  output_poll_execute+0xe4/0x224 [drm_kms_helper]
[  825.616233]  process_one_work+0x2b4/0x618
[  825.616264]  worker_thread+0x24c/0x464
[  825.616288]  kthread+0xec/0x110
[  825.616310]  ret_from_fork+0x10/0x20
[  825.616335] irq event stamp: 7634
[  825.616349] hardirqs last  enabled at (7633): [<ffffcd777831ee90>] _raw_spin_unlock_irq+0x3c/0x78
[  825.616384] hardirqs last disabled at (7634): [<ffffcd7778315a78>] __schedule+0x134/0x9f0
[  825.616411] softirqs last  enabled at (7630): [<ffffcd7707aacea0>] local_bh_enable+0x4/0x30 [ipv6]
[  825.617019] softirqs last disabled at (7618): [<ffffcd7707aace70>] local_bh_disable+0x4/0x30 [ipv6]
[  825.617586] ---[ end trace 0000000000000000 ]---

Therefore, deal with the deadlock as suggested by [1], using the
function drm_modeset_backoff().

[1] https://docs.kernel.org/gpu/drm-kms.html?highlight=kms#kms-locking

Fixes: 6bed2ea3cb38 ("drm/vc4: hdmi: Reset link on hotplug")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221229194638.178712-1-mcanal@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpu: ipu-v3: common: Add of_node_put() for reference returned by of_graph_get_port_by_id()

[ Upstream commit 9afdf98cfdfa2ba8ec068cf08c5fcdc1ed8daf3f ]

In ipu_add_client_devices(), we need to call of_node_put() for
reference returned by of_graph_get_port_by_id() in fail path.

Fixes: 17e052175039 ("gpu: ipu-v3: Do not bail out on missing optional port nodes")
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220720152227.1288413-1-windhl@126.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720152227.1288413-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: tidss: Fix pixel format definition

[ Upstream commit 2df0433b18f2735a49d2c3a968b40fa2881137c0 ]

There was a long-standing bug from a typo that created 2 ARGB1555 and
ABGR1555 pixel format entries. Weston 10 has a sanity check that alerted
me to this issue.

According to the Supported Pixel Data formats table we have the later
entries should have been for Alpha-X instead.

Signed-off-by: Randolph Sapp <rs@ti.com>
Fixes: 32a1795f57eecc ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221202001803.1765805-1-rs@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: dpi: Fix format mapping for RGB565

[ Upstream commit 0870d86eac8a9abd89a0be1b719d5dc5bac936f0 ]

The mapping is incorrect for RGB565_1X16 as it should be
DPI_FORMAT_18BIT_666_RGB_1 instead of DPI_FORMAT_18BIT_666_RGB_3.

Fixes: 08302c35b59d ("drm/vc4: Add DPI driver")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-7-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vkms: Fix null-ptr-deref in vkms_release()

[ Upstream commit 2fe2a8f40c21161ffe7653cc234e7934db5b7cc5 ]

A null-ptr-deref is triggered when it tries to destroy the workqueue in
vkms->output.composer_workq in vkms_release().

 KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
 CPU: 5 PID: 17193 Comm: modprobe Not tainted 6.0.0-11331-gd465bff130bf #24
 RIP: 0010:destroy_workqueue+0x2f/0x710
 ...
 Call Trace:
  <TASK>
  ? vkms_config_debugfs_init+0x50/0x50 [vkms]
  __devm_drm_dev_alloc+0x15a/0x1c0 [drm]
  vkms_init+0x245/0x1000 [vkms]
  do_one_initcall+0xd0/0x4f0
  do_init_module+0x1a4/0x680
  load_module+0x6249/0x7110
  __do_sys_finit_module+0x140/0x200
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x46/0xb0

The reason is that an OOM happened which triggers the destroy of the
workqueue, however, the workqueue is alloced in the later process,
thus a null-ptr-deref happened. A simple call graph is shown as below:

 vkms_init()
  vkms_create()
    devm_drm_dev_alloc()
      __devm_drm_dev_alloc()
        devm_drm_dev_init()
          devm_add_action_or_reset()
            devm_add_action() # an error happened
            devm_drm_dev_init_release()
              drm_dev_put()
                kref_put()
                  drm_dev_release()
                    vkms_release()
                      destroy_workqueue() # null-ptr-deref happened
    vkms_modeset_init()
      vkms_output_init()
        vkms_crtc_init() # where the workqueue get allocated

Fix this by checking if composer_workq is NULL before passing it to
the destroy_workqueue() in vkms_release().

Fixes: 6c234fe37c57 ("drm/vkms: Implement CRC debugfs API")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101065156.41584-3-yuancan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vkms: Fix memory leak in vkms_init()

[ Upstream commit 0d0b368b9d104b437e1f4850ae94bdb9a3601e89 ]

A memory leak was reported after the vkms module install failed.

unreferenced object 0xffff88810bc28520 (size 16):
  comm "modprobe", pid 9662, jiffies 4298009455 (age 42.590s)
  hex dump (first 16 bytes):
    01 01 00 64 81 88 ff ff 00 00 dc 0a 81 88 ff ff  ...d............
  backtrace:
    [<00000000e7561ff8>] kmalloc_trace+0x27/0x60
    [<000000000b1954a0>] 0xffffffffc45200a9
    [<00000000abbf1da0>] do_one_initcall+0xd0/0x4f0
    [<000000001505ee87>] do_init_module+0x1a4/0x680
    [<00000000958079ad>] load_module+0x6249/0x7110
    [<00000000117e4696>] __do_sys_finit_module+0x140/0x200
    [<00000000f74b12d2>] do_syscall_64+0x35/0x80
    [<000000008fc6fcde>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

The reason is that the vkms_init() returns without checking the return
value of vkms_create(), and if the vkms_create() failed, the config
allocated at the beginning of vkms_init() is leaked.

 vkms_init()
   config = kmalloc(...) # config allocated
   ...
   return vkms_create() # vkms_create failed and config is leaked

Fix this problem by checking return value of vkms_create() and free the
config if error happened.

Fixes: 2df7af93fdad ("drm/vkms: Add vkms_config type")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101065156.41584-2-yuancan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: megachips: Fix error handling in i2c_register_driver()

[ Upstream commit 4ecff954c370b82bce45bdca2846c5c5563e8a8a ]

A problem about insmod megachips-stdpxxxx-ge-b850v3-fw.ko failed is
triggered with the following log given:

[ 4497.981497] Error: Driver 'stdp4028-ge-b850v3-fw' is already registered, aborting...
insmod: ERROR: could not insert module megachips-stdpxxxx-ge-b850v3-fw.ko: Device or resource busy

The reason is that stdpxxxx_ge_b850v3_init() returns i2c_add_driver()
directly without checking its return value, if i2c_add_driver() failed,
it returns without calling i2c_del_driver() on the previous i2c driver,
resulting the megachips-stdpxxxx-ge-b850v3-fw can never be installed
later.
A simple call graph is shown as below:

 stdpxxxx_ge_b850v3_init()
   i2c_add_driver(&stdp4028_ge_b850v3_fw_driver)
   i2c_add_driver(&stdp2690_ge_b850v3_fw_driver)
     i2c_register_driver()
       driver_register()
         bus_add_driver()
           priv = kzalloc(...) # OOM happened
   # return without delete stdp4028_ge_b850v3_fw_driver

Fix by calling i2c_del_driver() on stdp4028_ge_b850v3_fw_driver when
i2c_add_driver() returns error.

Fixes: fcfa0ddc18ed ("drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108091226.114524-1-yuancan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: mxsfb: DRM_MXSFB should depend on ARCH_MXS || ARCH_MXC

[ Upstream commit 7783cc67862f9166c901bfa0f80b717aa8d354dd ]

Freescale/NXP i.MX LCDIF and eLCDIF LCD controllers are only present on
Freescale/NXP i.MX SoCs.  Hence add a dependency on ARCH_MXS ||
ARCH_MXC, to prevent asking the user about this driver when configuring
a kernel without Freescale/NXP i.MX support.

Fixes: 45d59d704080cc0c ("drm: Add new driver for MXSFB controller")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/98e74779ca2bc575d91afff03369e86b080c01ac.1669046358.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: mxsfb: DRM_IMX_LCDIF should depend on ARCH_MXC

[ Upstream commit 10ef5f2992006720318b9886961820155b3750fd ]

The Freescale/NXP i.MX LCDIFv3 LCD controller is only present on
Freescale/NXP i.MX SoCs.  Hence add a dependency on ARCH_MXC, to prevent
asking the user about this driver when configuring a kernel without
Freescale/NXP i.MX support.

Fixes: 9db35bb349a0ef32 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/6103c1aa65a7888c12d351ae63f29850f29f42b9.1669046403.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: ti-sn65dsi83: Fix delay after reset deassert to match spec

[ Upstream commit 4b03d5e0d3e86ee492d54254927d020dc0fe8acf ]

The datasheet specifies a delay of 10 milliseconds, but the current
driver only waits for 1 ms. Fix this to make sure the initialization
sequence meets the spec.

Fixes: ceb515ba29ba ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122081219.20143-1-frieder@fris.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/fourcc: Add missing big-endian XRGB1555 and RGB565 formats

[ Upstream commit 6fb6c979ca628583d4d0c59a0f8ff977e581ecc0 ]

As of commit eae06120f1974e1a ("drm: refuse ADDFB2 ioctl for broken
bigendian drivers"), drivers must set the
quirk_addfb_prefer_host_byte_order quirk to make the drm_mode_addfb()
compat code work correctly on big-endian machines.

While that works fine for big-endian XRGB8888 and ARGB8888, which are
mapped to the existing little-endian BGRX8888 and BGRA8888 formats, it
does not work for big-endian XRGB1555 and RGB565, as the latter are not
listed in the format database.

Fix this by adding the missing formats.  Limit this to big-endian
platforms, as there is currently no need to support these formats on
little-endian platforms.

Fixes: 6960e6da9cec3f66 ("drm: fix drm_mode_addfb() on big endian machines.")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/3ee1f8144feb96c28742b22384189f1f83bcfc1a.1669221671.git.geert@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: Fix potential null-ptr-deref due to drmm_mode_config_init()

[ Upstream commit 834c23e4f798dcdc8af251b3c428ceef94741991 ]

drmm_mode_config_init() will call drm_mode_create_standard_properties()
and won't check the ret value. When drm_mode_create_standard_properties()
failed due to alloc, property will be a NULL pointer and may causes the
null-ptr-deref. Fix the null-ptr-deref by adding the ret value check.

Found null-ptr-deref while testing insert module bochs:
general protection fault, probably for non-canonical address
    0xdffffc000000000c: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
CPU: 3 PID: 249 Comm: modprobe Not tainted 6.1.0-rc1+ #364
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:drm_object_attach_property+0x73/0x3c0 [drm]
Call Trace:
 <TASK>
 __drm_connector_init+0xb6c/0x1100 [drm]
 bochs_pci_probe.cold.11+0x4cb/0x7fe [bochs]
 pci_device_probe+0x17d/0x340
 really_probe+0x1db/0x5d0
 __driver_probe_device+0x1e7/0x250
 driver_probe_device+0x4a/0x120
 __driver_attach+0xcd/0x2c0
 bus_for_each_dev+0x11a/0x1b0
 bus_add_driver+0x3d7/0x500
 driver_register+0x18e/0x320
 do_one_initcall+0xc4/0x3e0
 do_init_module+0x1b4/0x630
 load_module+0x5dca/0x7230
 __do_sys_finit_module+0x100/0x170
 do_syscall_64+0x3f/0x90
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff65af9f839

Fixes: 6b4959f43a04 ("drm/atomic: atomic plane properties")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118021651.2460-1-shangxiaojing@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sefltests: netdevsim: wait for devlink instance after netns removal

[ Upstream commit f922c7b1c1c45740d329bf248936fdb78c0cff6e ]

When devlink instance is put into network namespace and that network
namespace gets deleted, devlink instance is moved back into init_ns.
This is done as a part of cleanup_net() routine. Since cleanup_net()
is called asynchronously from workqueue, there is no guarantee that
the devlink instance move is done after "ip netns del" returns.

So fix this race by making sure that the devlink instance is present
before any other operation.

Reported-by: Amir Tzin <amirtz@nvidia.com>
Fixes: b74c37fd35a2 ("selftests: netdevsim: add tests for devlink reload with resources")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230220132336.198597-1-jiri@resnulli.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftest: fib_tests: Always cleanup before exit

[ Upstream commit b60417a9f2b890a8094477b2204d4f73c535725e ]

Usage of `set -e` before executing a command causes immediate exit
on failure, without cleanup up the resources allocated at setup.
This can affect the next tests that use the same resources,
leading to a chain of failures.

A simple fix is to always call cleanup function when the script exists.
This approach is already used by other existing tests.

Fixes: 1056691b2680 ("selftests: fib_tests: Make test results more verbose")
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Link: https://lore.kernel.org/r/20230220110400.26737-2-roxana.nicolescu@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx4_en: Introduce flexible array to silence overflow warning

[ Upstream commit f8f185e39b4de91bc5235e5be0d829bea69d9b06 ]

The call "skb_copy_from_linear_data(skb, inl + 1, spc)" triggers a FORTIFY
memcpy() warning on ppc64 platform:

In function ‘fortify_memcpy_chk’,
    inlined from ‘skb_copy_from_linear_data’ at ./include/linux/skbuff.h:4029:2,
    inlined from ‘build_inline_wqe’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:722:4,
    inlined from ‘mlx4_en_xmit’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:1066:3:
./include/linux/fortify-string.h:513:25: error: call to ‘__write_overflow_field’ declared with
attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()?
[-Werror=attribute-warning]
  513 |                         __write_overflow_field(p_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Same behaviour on x86 you can get if you use "__always_inline" instead of
"inline" for skb_copy_from_linear_data() in skbuff.h

The call here copies data into inlined tx destricptor, which has 104
bytes (MAX_INLINE) space for data payload. In this case "spc" is known
in compile-time but the destination is used with hidden knowledge
(real structure of destination is different from that the compiler
can see). That cause the fortify warning because compiler can check
bounds, but the real bounds are different.  "spc" can't be bigger than
64 bytes (MLX4_INLINE_ALIGN), so the data can always fit into inlined
tx descriptor. The fact that "inl" points into inlined tx descriptor is
determined earlier in mlx4_en_xmit().

Avoid confusing the compiler with "inl + 1" constructions to get to past
the inl header by introducing a flexible array "data" to the struct so
that the compiler can see that we are not dealing with an array of inl
structs, but rather, arbitrary data following the structure. There are
no changes to the structure layout reported by pahole, and the resulting
machine code is actually smaller.

Reported-by: Josef Oskera <joskera@redhat.com>
Link: https://lore.kernel.org/lkml/20230217094541.2362873-1-joskera@redhat.com
Fixes: f68f2ff91512 ("fortify: Detect struct member overflows in memcpy() at compile-time")
Cc: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20230218183842.never.954-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: lan966x: Fix possible deadlock inside PTP

[ Upstream commit 3a70e0d4c9d74cb00f7c0ec022f5599f9f7ba07d ]

When doing timestamping in lan966x and having PROVE_LOCKING
enabled the following warning is shown.

========================================================
WARNING: possible irq lock inversion dependency detected
6.2.0-rc7-01749-gc54e1f7f7e36 #2786 Tainted: G                 N
--------------------------------------------------------
swapper/0/0 just changed the state of lock:
c2609f50 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x16c/0x2e8
but this lock took another, SOFTIRQ-unsafe lock in the past:
 (&lan966x->ptp_ts_id_lock){+.+.}-{2:2}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&lan966x->ptp_ts_id_lock);
                               local_irq_disable();
                               lock(_xmit_ETHER#2);
                               lock(&lan966x->ptp_ts_id_lock);
  <Interrupt>
    lock(_xmit_ETHER#2);

 *** DEADLOCK ***

5 locks held by swapper/0/0:
 #0: c1001e18 ((&ndev->rs_timer)){+.-.}-{0:0}, at: call_timer_fn+0x0/0x33c
 #1: c105e7c4 (rcu_read_lock){....}-{1:2}, at: ndisc_send_skb+0x134/0x81c
 #2: c105e7d8 (rcu_read_lock_bh){....}-{1:2}, at: ip6_finish_output2+0x17c/0xc64
 #3: c105e7d8 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x4c/0x1224
 #4: c3056174 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x354/0x1224

the shortest dependencies between 2nd lock and 1st lock:
 -> (&lan966x->ptp_ts_id_lock){+.+.}-{2:2} {
    HARDIRQ-ON-W at:
                      lock_acquire.part.0+0xb0/0x248
                      _raw_spin_lock+0x38/0x48
                      lan966x_ptp_irq_handler+0x164/0x2a8
                      irq_thread_fn+0x1c/0x78
                      irq_thread+0x130/0x278
                      kthread+0xec/0x110
                      ret_from_fork+0x14/0x28
    SOFTIRQ-ON-W at:
                      lock_acquire.part.0+0xb0/0x248
                      _raw_spin_lock+0x38/0x48
                      lan966x_ptp_irq_handler+0x164/0x2a8
                      irq_thread_fn+0x1c/0x78
                      irq_thread+0x130/0x278
                      kthread+0xec/0x110
                      ret_from_fork+0x14/0x28
    INITIAL USE at:
                     lock_acquire.part.0+0xb0/0x248
                     _raw_spin_lock_irqsave+0x4c/0x68
                     lan966x_ptp_txtstamp_request+0x128/0x1cc
                     lan966x_port_xmit+0x224/0x43c
                     dev_hard_start_xmit+0xa8/0x2f0
                     sch_direct_xmit+0x108/0x2e8
                     __dev_queue_xmit+0x41c/0x1224
                     packet_sendmsg+0xdb4/0x134c
                     __sys_sendto+0xd0/0x154
                     sys_send+0x18/0x20
                     ret_fast_syscall+0x0/0x1c
  }
  ... key      at: [<c174ba0c>] __key.2+0x0/0x8
  ... acquired at:
   _raw_spin_lock_irqsave+0x4c/0x68
   lan966x_ptp_txtstamp_request+0x128/0x1cc
   lan966x_port_xmit+0x224/0x43c
   dev_hard_start_xmit+0xa8/0x2f0
   sch_direct_xmit+0x108/0x2e8
   __dev_queue_xmit+0x41c/0x1224
   packet_sendmsg+0xdb4/0x134c
   __sys_sendto+0xd0/0x154
   sys_send+0x18/0x20
   ret_fast_syscall+0x0/0x1c

-> (_xmit_ETHER#2){+.-.}-{2:2} {
   HARDIRQ-ON-W at:
                    lock_acquire.part.0+0xb0/0x248
                    _raw_spin_lock+0x38/0x48
                    netif_freeze_queues+0x38/0x68
                    dev_deactivate_many+0xac/0x388
                    dev_deactivate+0x38/0x6c
                    linkwatch_do_dev+0x70/0x8c
                    __linkwatch_run_queue+0xd4/0x1e8
                    linkwatch_event+0x24/0x34
                    process_one_work+0x284/0x744
                    worker_thread+0x28/0x4bc
                    kthread+0xec/0x110
                    ret_from_fork+0x14/0x28
   IN-SOFTIRQ-W at:
                    lock_acquire.part.0+0xb0/0x248
                    _raw_spin_lock+0x38/0x48
                    sch_direct_xmit+0x16c/0x2e8
                    __dev_queue_xmit+0x41c/0x1224
                    ip6_finish_output2+0x5f4/0xc64
                    ndisc_send_skb+0x4cc/0x81c
                    addrconf_rs_timer+0xb0/0x2f8
                    call_timer_fn+0xb4/0x33c
                    expire_timers+0xb4/0x10c
                    run_timer_softirq+0xf8/0x2a8
                    __do_softirq+0xd4/0x5fc
                    __irq_exit_rcu+0x138/0x17c
                    irq_exit+0x8/0x28
                    __irq_svc+0x90/0xbc
                    arch_cpu_idle+0x30/0x3c
                    default_idle_call+0x44/0xac
                    do_idle+0xc8/0x138
                    cpu_startup_entry+0x18/0x1c
                    rest_init+0xcc/0x168
                    arch_post_acpi_subsys_init+0x0/0x8
   INITIAL USE at:
                   lock_acquire.part.0+0xb0/0x248
                   _raw_spin_lock+0x38/0x48
                   netif_freeze_queues+0x38/0x68
                   dev_deactivate_many+0xac/0x388
                   dev_deactivate+0x38/0x6c
                   linkwatch_do_dev+0x70/0x8c
                   __linkwatch_run_queue+0xd4/0x1e8
                   linkwatch_event+0x24/0x34
                   process_one_work+0x284/0x744
                   worker_thread+0x28/0x4bc
                   kthread+0xec/0x110
                   ret_from_fork+0x14/0x28
 }
 ... key      at: [<c175974c>] netdev_xmit_lock_key+0x8/0x1c8
 ... acquired at:
   __lock_acquire+0x978/0x2978
   lock_acquire.part.0+0xb0/0x248
   _raw_spin_lock+0x38/0x48
   sch_direct_xmit+0x16c/0x2e8
   __dev_queue_xmit+0x41c/0x1224
   ip6_finish_output2+0x5f4/0xc64
   ndisc_send_skb+0x4cc/0x81c
   addrconf_rs_timer+0xb0/0x2f8
   call_timer_fn+0xb4/0x33c
   expire_timers+0xb4/0x10c
   run_timer_softirq+0xf8/0x2a8
   __do_softirq+0xd4/0x5fc
   __irq_exit_rcu+0x138/0x17c
   irq_exit+0x8/0x28
   __irq_svc+0x90/0xbc
   arch_cpu_idle+0x30/0x3c
   default_idle_call+0x44/0xac
   do_idle+0xc8/0x138
   cpu_startup_entry+0x18/0x1c
   rest_init+0xcc/0x168
   arch_post_acpi_subsys_init+0x0/0x8

stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G                 N 6.2.0-rc7-01749-gc54e1f7f7e36 #2786
Hardware name: Generic DT based system
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x58/0x70
 dump_stack_lvl from mark_lock.part.0+0x59c/0x93c
 mark_lock.part.0 from __lock_acquire+0x978/0x2978
 __lock_acquire from lock_acquire.part.0+0xb0/0x248
 lock_acquire.part.0 from _raw_spin_lock+0x38/0x48
 _raw_spin_lock from sch_direct_xmit+0x16c/0x2e8
 sch_direct_xmit from __dev_queue_xmit+0x41c/0x1224
 __dev_queue_xmit from ip6_finish_output2+0x5f4/0xc64
 ip6_finish_output2 from ndisc_send_skb+0x4cc/0x81c
 ndisc_send_skb from addrconf_rs_timer+0xb0/0x2f8
 addrconf_rs_timer from call_timer_fn+0xb4/0x33c
 call_timer_fn from expire_timers+0xb4/0x10c
 expire_timers from run_timer_softirq+0xf8/0x2a8
 run_timer_softirq from __do_softirq+0xd4/0x5fc
 __do_softirq from __irq_exit_rcu+0x138/0x17c
 __irq_exit_rcu from irq_exit+0x8/0x28
 irq_exit from __irq_svc+0x90/0xbc
Exception stack(0xc1001f20 to 0xc1001f68)
1f20: ffffffff ffffffff 00000001 c011f840 c100e000 c100e000 c1009314 c1009370
1f40: c10f0c1a c0d5e564 c0f5da8c 00000000 00000000 c1001f70 c010f0bc c010f0c0
1f60: 600f0013 ffffffff
 __irq_svc from arch_cpu_idle+0x30/0x3c
 arch_cpu_idle from default_idle_call+0x44/0xac
 default_idle_call from do_idle+0xc8/0x138
 do_idle from cpu_startup_entry+0x18/0x1c
 cpu_startup_entry from rest_init+0xcc/0x168
 rest_init from arch_post_acpi_subsys_init+0x0/0x8

Fix this by using spin_lock_irqsave/spin_lock_irqrestore also
inside lan966x_ptp_irq_handler.

Fixes: e85a96e48e33 ("net: lan966x: Add support for ptp interrupts")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230217210917.2649365-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bcmgenet: fix MoCA LED control

[ Upstream commit a7515af9fb8f0890fe540b108def4a86b9e8330a ]

When the bcmgenet_mii_config() code was refactored it was missed
that the LED control for the MoCA interface got overwritten by
the port_ctrl value. Its previous programming is restored here.

Fixes: 4f8d81b77e66 ("net: bcmgenet: Refactor register access in bcmgenet_mii_config")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

l2tp: Avoid possible recursive deadlock in l2tp_tunnel_register()

[ Upstream commit 9ca5e7ecab064f1f47da07f7c1ddf40e4bc0e5ac ]

When a file descriptor of pppol2tp socket is passed as file descriptor
of UDP socket, a recursive deadlock occurs in l2tp_tunnel_register().
This situation is reproduced by the following program:

int main(void)
{
int sock;
struct sockaddr_pppol2tp addr;

sock = socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OL2TP);
if (sock < 0) {
perror("socket");
return 1;
}

addr.sa_family = AF_PPPOX;
addr.sa_protocol = PX_PROTO_OL2TP;
addr.pppol2tp.pid = 0;
addr.pppol2tp.fd = sock;
addr.pppol2tp.addr.sin_family = PF_INET;
addr.pppol2tp.addr.sin_port = htons(0);
addr.pppol2tp.addr.sin_addr.s_addr = inet_addr("192.168.0.1");
addr.pppol2tp.s_tunnel = 1;
addr.pppol2tp.s_session = 0;
addr.pppol2tp.d_tunnel = 0;
addr.pppol2tp.d_session = 0;

if (connect(sock, (const struct sockaddr *)&addr, sizeof(addr)) < 0) {
perror("connect");
return 1;
}

return 0;
}

This program causes the following lockdep warning:

 ============================================
 WARNING: possible recursive locking detected
 6.2.0-rc5-00205-gc96618275234 #56 Not tainted
 --------------------------------------------
 repro/8607 is trying to acquire lock:
 ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: l2tp_tunnel_register+0x2b7/0x11c0

 but task is already holding lock:
 ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: pppol2tp_connect+0xa82/0x1a30

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(sk_lock-AF_PPPOX);
   lock(sk_lock-AF_PPPOX);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 1 lock held by repro/8607:
  #0: ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: pppol2tp_connect+0xa82/0x1a30

 stack backtrace:
 CPU: 0 PID: 8607 Comm: repro Not tainted 6.2.0-rc5-00205-gc96618275234 #56
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014
 Call Trace:
  <TASK>
  dump_stack_lvl+0x100/0x178
  __lock_acquire.cold+0x119/0x3b9
  ? lockdep_hardirqs_on_prepare+0x410/0x410
  lock_acquire+0x1e0/0x610
  ? l2tp_tunnel_register+0x2b7/0x11c0
  ? lock_downgrade+0x710/0x710
  ? __fget_files+0x283/0x3e0
  lock_sock_nested+0x3a/0xf0
  ? l2tp_tunnel_register+0x2b7/0x11c0
  l2tp_tunnel_register+0x2b7/0x11c0
  ? sprintf+0xc4/0x100
  ? l2tp_tunnel_del_work+0x6b0/0x6b0
  ? debug_object_deactivate+0x320/0x320
  ? lockdep_init_map_type+0x16d/0x7a0
  ? lockdep_init_map_type+0x16d/0x7a0
  ? l2tp_tunnel_create+0x2bf/0x4b0
  ? l2tp_tunnel_create+0x3c6/0x4b0
  pppol2tp_connect+0x14e1/0x1a30
  ? pppol2tp_put_sk+0xd0/0xd0
  ? aa_sk_perm+0x2b7/0xa80
  ? aa_af_perm+0x260/0x260
  ? bpf_lsm_socket_connect+0x9/0x10
  ? pppol2tp_put_sk+0xd0/0xd0
  __sys_connect_file+0x14f/0x190
  __sys_connect+0x133/0x160
  ? __sys_connect_file+0x190/0x190
  ? lockdep_hardirqs_on+0x7d/0x100
  ? ktime_get_coarse_real_ts64+0x1b7/0x200
  ? ktime_get_coarse_real_ts64+0x147/0x200
  ? __audit_syscall_entry+0x396/0x500
  __x64_sys_connect+0x72/0xb0
  do_syscall_64+0x38/0xb0
  entry_SYSCALL_64_after_hwframe+0x63/0xcd

This patch fixes the issue by getting/creating the tunnel before
locking the pppol2tp socket.

Fixes: 0b2c59720e65 ("l2tp: close all race conditions in l2tp_tunnel_register()")
Cc: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/net: Interpret UDP_GRO cmsg data as an int value

[ Upstream commit 436864095a95fcc611c20c44a111985fa9848730 ]

Data passed to user-space with a (SOL_UDP, UDP_GRO) cmsg carries an
int (see udp_cmsg_recv), not a u16 value, as strace confirms:

  recvmsg(8, {msg_name=...,
              msg_iov=[{iov_base="\0\0..."..., iov_len=96000}],
              msg_iovlen=1,
              msg_control=[{cmsg_len=20,         <-- sizeof(cmsghdr) + 4
                            cmsg_level=SOL_UDP,
                            cmsg_type=0x68}],    <-- UDP_GRO
                            msg_controllen=24,
                            msg_flags=0}, 0) = 11200

Interpreting the data as an u16 value won't work on big-endian platforms.
Since it is too late to back out of this API decision [1], fix the test.

[1]: https://lore.kernel.org/netdev/20230131174601.203127-1-jakub@cloudflare.com/

Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: fix application data exception

[ Upstream commit 475f9ff63ee8c296aa46c6e9e9ad9bdd301c6bdf ]

There is a certain probability that following
exceptions will occur in the wrk benchmark test:

Running 10s test @ http://11.213.45.6:80
  8 threads and 64 connections
  Thread Stats   Avg      Stdev     Max   +/- Stdev
    Latency     3.72ms   13.94ms 245.33ms   94.17%
    Req/Sec     1.96k   713.67     5.41k    75.16%
  155262 requests in 10.10s, 23.10MB read
Non-2xx or 3xx responses: 3

We will find that the error is HTTP 400 error, which is a serious
exception in our test, which means the application data was
corrupted.

Consider the following scenarios:

CPU0                            CPU1

buf_desc->used = 0;
                                cmpxchg(buf_desc->used, 0, 1)
                                deal_with(buf_desc)

memset(buf_desc->cpu_addr,0);

This will cause the data received by a victim connection to be cleared,
thus triggering an HTTP 400 error in the server.

This patch exchange the order between clear used and memset, add
barrier to ensure memory consistency.

Fixes: 1c5526968e27 ("net/smc: Clear memory when release and reuse buffer")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: fix potential panic dues to unprotected smc_llc_srv_add_link()

[ Upstream commit e40b801b3603a8f90b46acbacdea3505c27f01c0 ]

There is a certain chance to trigger the following panic:

PID: 5900   TASK: ffff88c1c8af4100  CPU: 1   COMMAND: "kworker/1:48"
 #0 [ffff9456c1cc79a0] machine_kexec at ffffffff870665b7
 #1 [ffff9456c1cc79f0] __crash_kexec at ffffffff871b4c7a
 #2 [ffff9456c1cc7ab0] crash_kexec at ffffffff871b5b60
 #3 [ffff9456c1cc7ac0] oops_end at ffffffff87026ce7
 #4 [ffff9456c1cc7ae0] page_fault_oops at ffffffff87075715
 #5 [ffff9456c1cc7b58] exc_page_fault at ffffffff87ad0654
 #6 [ffff9456c1cc7b80] asm_exc_page_fault at ffffffff87c00b62
    [exception RIP: ib_alloc_mr+19]
    RIP: ffffffffc0c9cce3  RSP: ffff9456c1cc7c38  RFLAGS: 00010202
    RAX: 0000000000000000  RBX: 0000000000000002  RCX: 0000000000000004
    RDX: 0000000000000010  RSI: 0000000000000000  RDI: 0000000000000000
    RBP: ffff88c1ea281d00   R8: 000000020a34ffff   R9: ffff88c1350bbb20
    R10: 0000000000000000  R11: 0000000000000001  R12: 0000000000000000
    R13: 0000000000000010  R14: ffff88c1ab040a50  R15: ffff88c1ea281d00
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffff9456c1cc7c60] smc_ib_get_memory_region at ffffffffc0aff6df [smc]
 #8 [ffff9456c1cc7c88] smcr_buf_map_link at ffffffffc0b0278c [smc]
 #9 [ffff9456c1cc7ce0] __smc_buf_create at ffffffffc0b03586 [smc]

The reason here is that when the server tries to create a second link,
smc_llc_srv_add_link() has no protection and may add a new link to
link group. This breaks the security environment protected by
llc_conf_mutex.

Fixes: 2d2209f20189 ("net/smc: first part of add link processing as SMC server")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts

[ Upstream commit 13a157b38ca5b4f9eed81442b8821db293755961 ]

When support for the interrupt controller was added with a5042de2688d,
we forgot to update the flags to be set to contain IRQ_LEVEL. While the
flow handler is correct, the output from /proc/interrupts does not show
such interrupts as being level triggered when they are, correct that.

Fixes: a5042de2688d ("irqchip: bcm7120-l2: Add Broadcom BCM7120-style Level 2 interrupt controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221216230934.2478345-3-f.fainelli@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts

[ Upstream commit 94debe03e8afa1267f95a9001786a6aa506b9ff3 ]

When support for the level triggered interrupt controller flavor was
added with c0ca7262088e, we forgot to update the flags to be set to
contain IRQ_LEVEL. While the flow handler is correct, the output from
/proc/interrupts does not show such interrupts as being level triggered
when they are, correct that.

Fixes: c0ca7262088e ("irqchip/brcmstb-l2: Add support for the BCM7271 L2 controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221216230934.2478345-2-f.fainelli@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix global subprog context argument resolution logic

[ Upstream commit d384dce281ed1b504fae2e279507827638d56fa3 ]

KPROBE program's user-facing context type is defined as typedef
bpf_user_pt_regs_t. This leads to a problem when trying to passing
kprobe/uprobe/usdt context argument into global subprog, as kernel
always strip away mods and typedefs of user-supplied type, but takes
expected type from bpf_ctx_convert as is, which causes mismatch.

Current way to work around this is to define a fake struct with the same
name as expected typedef:

  struct bpf_user_pt_regs_t {};

  __noinline my_global_subprog(struct bpf_user_pt_regs_t *ctx) { ... }

This patch fixes the issue by resolving expected type, if it's not
a struct. It still leaves the above work-around working for backwards
compatibility.

Fixes: 91cc1a99740e ("bpf: Annotate context types")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230216045954.3002473-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

LoongArch, bpf: Use 4 instructions for function address in JIT

[ Upstream commit 64f50f6575721ef03d001e907455cbe3baa2a5b1 ]

This patch fixes the following issue of function calls in JIT, like:

  [   29.346981] multi-func JIT bug 105 != 103

The issus can be reproduced by running the "inline simple bpf_loop call"
verifier test.

This is because we are emiting 2-4 instructions for 64-bit immediate moves.
During the first pass of JIT, the placeholder address is zero, emiting two
instructions for it. In the extra pass, the function address is in XKVRANGE,
emiting four instructions for it. This change the instruction index in
JIT context. Let's always use 4 instructions for function address in JIT.
So that the instruction sequences don't change between the first pass and
the extra pass for function calls.

Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/bpf/20230214152633.2265699-1-hengqi.chen@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

xsk: check IFF_UP earlier in Tx path

[ Upstream commit 1596dae2f17ec5c6e8c8f0e3fec78c5ae55c1e0b ]

Xsk Tx can be triggered via either sendmsg() or poll() syscalls. These
two paths share a call to common function xsk_xmit() which has two
sanity checks within. A pseudo code example to show the two paths:

__xsk_sendmsg() :                       xsk_poll():
if (unlikely(!xsk_is_bound(xs)))        if (unlikely(!xsk_is_bound(xs)))
    return -ENXIO;                          return mask;
if (unlikely(need_wait))                (...)
    return -EOPNOTSUPP;                 xsk_xmit()
mark napi id
(...)
xsk_xmit()

xsk_xmit():
if (unlikely(!(xs->dev->flags & IFF_UP)))
return -ENETDOWN;
if (unlikely(!xs->tx))
return -ENOBUFS;

As it can be observed above, in sendmsg() napi id can be marked on
interface that was not brought up and this causes a NULL ptr
dereference:

[31757.505631] BUG: kernel NULL pointer dereference, address: 0000000000000018
[31757.512710] #PF: supervisor read access in kernel mode
[31757.517936] #PF: error_code(0x0000) - not-present page
[31757.523149] PGD 0 P4D 0
[31757.525726] Oops: 0000 [#1] PREEMPT SMP NOPTI
[31757.530154] CPU: 26 PID: 95641 Comm: xdpsock Not tainted 6.2.0-rc5+ #40
[31757.536871] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[31757.547457] RIP: 0010:xsk_sendmsg+0xde/0x180
[31757.551799] Code: 00 75 a2 48 8b 00 a8 04 75 9b 84 d2 74 69 8b 85 14 01 00 00 85 c0 75 1b 48 8b 85 28 03 00 00 48 8b 80 98 00 00 00 48 8b 40 20 <8b> 40 18 89 85 14 01 00 00 8b bd 14 01 00 00 81 ff 00 01 00 00 0f
[31757.570840] RSP: 0018:ffffc90034f27dc0 EFLAGS: 00010246
[31757.576143] RAX: 0000000000000000 RBX: ffffc90034f27e18 RCX: 0000000000000000
[31757.583389] RDX: 0000000000000001 RSI: ffffc90034f27e18 RDI: ffff88984cf3c100
[31757.590631] RBP: ffff88984714a800 R08: ffff88984714a800 R09: 0000000000000000
[31757.597877] R10: 0000000000000001 R11: 0000000000000000 R12: 00000000fffffffa
[31757.605123] R13: 0000000000000000 R14: 0000000000000003 R15: 0000000000000000
[31757.612364] FS:  00007fb4c5931180(0000) GS:ffff88afdfa00000(0000) knlGS:0000000000000000
[31757.620571] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[31757.626406] CR2: 0000000000000018 CR3: 000000184b41c003 CR4: 00000000007706e0
[31757.633648] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[31757.640894] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[31757.648139] PKRU: 55555554
[31757.650894] Call Trace:
[31757.653385]  <TASK>
[31757.655524]  sock_sendmsg+0x8f/0xa0
[31757.659077]  ? sockfd_lookup_light+0x12/0x70
[31757.663416]  __sys_sendto+0xfc/0x170
[31757.667051]  ? do_sched_setscheduler+0xdb/0x1b0
[31757.671658]  __x64_sys_sendto+0x20/0x30
[31757.675557]  do_syscall_64+0x38/0x90
[31757.679197]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
[31757.687969] Code: 8e f6 ff 44 8b 4c 24 2c 4c 8b 44 24 20 41 89 c4 44 8b 54 24 28 48 8b 54 24 18 b8 2c 00 00 00 48 8b 74 24 10 8b 7c 24 08 0f 05 <48> 3d 00 f0 ff ff 77 3a 44 89 e7 48 89 44 24 08 e8 b5 8e f6 ff 48
[31757.707007] RSP: 002b:00007ffd49c73c70 EFLAGS: 00000293 ORIG_RAX: 000000000000002c
[31757.714694] RAX: ffffffffffffffda RBX: 000055a996565380 RCX: 00007fb4c5727c16
[31757.721939] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
[31757.729184] RBP: 0000000000000040 R08: 0000000000000000 R09: 0000000000000000
[31757.736429] R10: 0000000000000040 R11: 0000000000000293 R12: 0000000000000000
[31757.743673] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[31757.754940]  </TASK>

To fix this, let's make xsk_xmit a function that will be responsible for
generic Tx, where RCU is handled accordingly and pull out sanity checks
and xs->zc handling. Populate sanity checks to __xsk_sendmsg() and
xsk_poll().

Fixes: ca2e1a627035 ("xsk: Mark napi_id on sendmsg()")
Fixes: 18b1ab7aa76b ("xsk: Fix race at socket teardown")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230215143309.13145-1-maciej.fijalkowski@intel.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: esd_usb: Make use of can_change_state() and relocate checking skb for NULL

[ Upstream commit 9684b000a86299b5968fef8ffbf1484def37452a ]

Start a rework initiated by Vincents remarks "You should not report
the greatest of txerr and rxerr but the one which actually increased."
[1] and "As far as I understand, those flags should be set only when
the threshold is reached" [2] .

Therefore make use of can_change_state() to (among others) set the
flags CAN_ERR_CRTL_[RT]X_WARNING and CAN_ERR_CRTL_[RT]X_PASSIVE,
maintain CAN statistic counters for error_warning, error_passive and
bus_off.

Relocate testing alloc_can_err_skb() for NULL to the end of
esd_usb_rx_event(), to have things like can_bus_off(),
can_change_state() working even in out of memory conditions.

Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Link: [1] https://lore.kernel.org/all/CAMZ6RqKGBWe15aMkf8-QLf-cOQg99GQBebSm+1wEzTqHgvmNuw@mail.gmail.com/
Link: [2] https://lore.kernel.org/all/CAMZ6Rq+QBO1yTX_o6GV0yhdBj-RzZSRGWDZBS0fs7zbSTy4hmA@mail.gmail.com/
Link: https://lore.kernel.org/all/20230216190450.3901254-3-frank.jungclaus@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: esd_usb: Move mislocated storage of SJA1000_ECC_SEG bits in case of a bus error

[ Upstream commit 118469f88180438ef43dee93d71f77c00e7b425d ]

Move the supply for cf->data[3] (bit stream position of CAN error), in
case of a bus- or protocol-error, outside of the "switch (ecc &
SJA1000_ECC_MASK){}"-statement, because this bit stream position is
independent of the error type.

Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Link: https://lore.kernel.org/all/20230216190450.3901254-2-frank.jungclaus@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Fix xdp_do_redirect on s390x

[ Upstream commit 06c1865b0b0c7820ea53af2394dd7aff31100295 ]

s390x cache line size is 256 bytes, so skb_shared_info must be aligned
on a much larger boundary than for x86. This makes the maximum packet
size smaller.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-11-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 6c20822fada1 ("bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES")
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Zeroing allocated object from slab in bpf memory allocator

[ Upstream commit 997849c4b969034e225153f41026657def66d286 ]

Currently the freed element in bpf memory allocator may be immediately
reused, for htab map the reuse will reinitialize special fields in map
value (e.g., bpf_spin_lock), but lookup procedure may still access
these special fields, and it may lead to hard-lockup as shown below:

 NMI backtrace for cpu 16
 CPU: 16 PID: 2574 Comm: htab.bin Tainted: G             L     6.1.0+ #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
 RIP: 0010:queued_spin_lock_slowpath+0x283/0x2c0
 ......
 Call Trace:
  <TASK>
  copy_map_value_locked+0xb7/0x170
  bpf_map_copy_value+0x113/0x3c0
  __sys_bpf+0x1c67/0x2780
  __x64_sys_bpf+0x1c/0x20
  do_syscall_64+0x30/0x60
  entry_SYSCALL_64_after_hwframe+0x46/0xb0
 ......
  </TASK>

For htab map, just like the preallocated case, these is no need to
initialize these special fields in map value again once these fields
have been initialized. For preallocated htab map, these fields are
initialized through __GFP_ZERO in bpf_map_area_alloc(), so do the
similar thing for non-preallocated htab in bpf memory allocator. And
there is no need to use __GFP_ZERO for per-cpu bpf memory allocator,
because __alloc_percpu_gfp() does it implicitly.

Fixes: 0fd7c5d43339 ("bpf: Optimize call_rcu in non-preallocated hash map.")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230215082132.3856544-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: pass 'sta' to ieee80211_rx_data_set_sta()

[ Upstream commit 0d846bdc11101ac0ba4d89c2be359af08cb9379b ]

There's at least one case in ieee80211_rx_for_interface()
where we might pass &((struct sta_info *)NULL)->sta to it
only to then do container_of(), and then checking the
result for NULL, but checking the result of container_of()
for NULL looks really odd.

Fix this by just passing the struct sta_info * instead.

Fixes: e66b7920aa5a ("wifi: mac80211: fix initialization of rx->link and rx->link_sta")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Fix map_kptr test.

[ Upstream commit 62d101d5f422cde39b269f7eb4cbbe2f1e26f9d4 ]

The compiler is optimizing out majority of unref_ptr read/writes, so the test
wasn't testing much. For example, one could delete '__kptr' tag from
'struct prog_test_ref_kfunc __kptr *unref_ptr;' and the test would still "pass".

Convert it to volatile stores. Confirmed by comparing bpf asm before/after.

Fixes: 2cbc469a6fc3 ("selftests/bpf: Add C tests for kptr")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230214235051.22938-1-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/drivers/hisi: Drop second sensor hi3660

[ Upstream commit 15cc25829a97c3957e520e971868aacc84341317 ]

The commit 74c8e6bffbe1 ("driver core: Add __alloc_size hint to devm
allocators") exposes a panic "BRK handler: Fatal exception" on the
hi3660_thermal_probe funciton.
This is because the function allocates memory for only one
sensors array entry, but tries to fill up a second one.

Fix this by removing the unneeded second access.

Fixes: 7d3a2a2bbadb ("thermal/drivers/hisi: Fix number of sensors on hi3660")
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
Link: https://lore.kernel.org/linux-mm/20221101223321.1326815-5-keescook@chromium.org/
Link: https://lore.kernel.org/r/20230210141507.71014-1-yongqin.liu@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/lib/thermal: Fix thermal_sampling_exit()

[ Upstream commit a29cbd76aaf63f5493e962aa2fbaadcdc4615143 ]

thermal_sampling_init() suscribes to THERMAL_GENL_SAMPLING_GROUP_NAME group
so thermal_sampling_exit() should unsubscribe from the same group.

Fixes: 47c4b0de080a ("tools/lib/thermal: Add a thermal library")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230202102812.453357-1-vincent.guittot@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: fix off-by-one link setting

[ Upstream commit cf08e29db760b144bde51e2444f3430c75763e26 ]

The convention for find_first_bit() is 0-based, while ffs()
is 1-based, so this is now off-by-one. I cannot reproduce the
gcc-9 problem, but since the -1 is now removed, I'm hoping it
will still avoid the original issue.

Reported-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Fixes: 1d8d4af43474 ("wifi: mac80211: avoid u32_encode_bits() warning")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: avoid u32_encode_bits() warning

[ Upstream commit 1d8d4af4347420d657be448f8be4c39c558f3b5d ]

gcc-9 triggers a false-postive warning in ieee80211_mlo_multicast_tx()
for u32_encode_bits(ffs(links) - 1, ...), since ffs() can return zero
on an empty bitmask, and the negative argument to u32_encode_bits()
is then out of range:

In file included from include/linux/ieee80211.h:21,
                 from include/net/cfg80211.h:23,
                 from net/mac80211/tx.c:23:
In function 'u32_encode_bits',
    inlined from 'ieee80211_mlo_multicast_tx' at net/mac80211/tx.c:4437:17,
    inlined from 'ieee80211_subif_start_xmit' at net/mac80211/tx.c:4485:3:
include/linux/bitfield.h:177:3: error: call to '__field_overflow' declared with attribute error: value doesn't fit into mask
  177 |   __field_overflow();     \
      |   ^~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:197:2: note: in expansion of macro '____MAKE_OP'
  197 |  ____MAKE_OP(u##size,u##size,,)
      |  ^~~~~~~~~~~
include/linux/bitfield.h:200:1: note: in expansion of macro '__MAKE_OP'
  200 | __MAKE_OP(32)
      | ^~~~~~~~~

Newer compiler versions do not cause problems with the zero argument
because they do not consider this a __builtin_constant_p().
It's also harmless since the hweight16() check already guarantees
that this cannot be 0.

Replace the ffs() with an equivalent find_first_bit() check that
matches the later for_each_set_bit() style and avoids the warning.

Fixes: 963d0e8d08d9 ("wifi: mac80211: optionally implement MLO multicast TX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230214132025.1532147-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: Don't translate MLD addresses for multicast

[ Upstream commit daf8fb4295dccc032515cdc1bd3873370063542b ]

MLD address translation should be done only for individually addressed
frames. Otherwise, AAD calculation would be wrong and the decryption
would fail.

Fixes: e66b7920aa5ac ("wifi: mac80211: fix initialization of rx->link and rx->link_sta")
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Link: https://lore.kernel.org/r/20230214101048.792414-1-andrei.otcheretianski@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: fix non-MLO station association

[ Upstream commit aaacf1740f2f95e0c5449ff3bbcff252d69cf952 ]

Non-MLO station frames are dropped in Rx path due to the condition
check in ieee80211_rx_is_valid_sta_link_id(). In multi-link AP scenario,
non-MLO stations try to connect in any of the valid links in the ML AP,
where the station valid_links and link_id params are valid in the
ieee80211_sta object. But ieee80211_rx_is_valid_sta_link_id() always
return false for the non-MLO stations by the assumption taken is
valid_links and link_id are not valid in non-MLO stations object
(ieee80211_sta), this assumption is wrong. Due to this assumption,
non-MLO station frames are dropped which leads to failure in association.

Fix it by removing the condition check and allow the link validation
check for the non-MLO stations.

Fixes: e66b7920aa5a ("wifi: mac80211: fix initialization of rx->link and rx->link_sta")
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://lore.kernel.org/r/20230206160330.1613-1-quic_periyasa@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: make rate u32 in sta_set_rate_info_rx()

[ Upstream commit 59336e07b287d91dc4ec265e07724e8f7e3d0209 ]

The value of last_rate in ieee80211_sta_rx_stats is degraded from u32 to
u16 after being assigned to rate variable, which causes information loss
in STA_STATS_FIELD_TYPE and later bitfields.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230209110659.25447-1-shayne.chen@mediatek.com
Fixes: 41cbb0f5a295 ("mac80211: add support for HE")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: move color collision detection report in a delayed work

[ Upstream commit 9288188438d85e22c23cfd6657ee8a801babc83c ]

Move color collision report in a dedicated delayed work and do not run
it in interrupt context in order to rate-limit the number of events
reported to userspace. Moreover grab wdev mutex in
ieee80211_color_collision_detection_work routine since it is required
by cfg80211_obss_color_collision_notify().

Tested-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Fixes: 5f9404abdf2a ("mac80211: add support for BSS color change")
Link: https://lore.kernel.org/r/3f6cf60c892ad40c1cca4a55d62b1224ef1c6ce9.1674644379.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: crypto4xx - Call dma_unmap_page when done

[ Upstream commit bcdda4301bdc4955d45f7e1ffefb6207967b067e ]

In crypto4xx_cipher_done, we should be unmapping the dst page, not
mapping it.

This was flagged by a sparse warning about the unused addr variable.
While we're at it, also fix a sparse warning regarding the unused
ctx variable in crypto4xx_ahash_done (by actually using it).

Fixes: 049359d65527 ("crypto: amcc - Add crypt4xx driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: octeontx2 - Fix objects shared between several modules

[ Upstream commit 72bc4e71dbeedee0a446bcbc37c9bb25449072b7 ]

cn10k_cpt.o, otx2_cptlf.o and otx2_cpt_mbox_common.o are linked
into both rvu_cptpf and rvu_cptvf modules:

> scripts/Makefile.build:252: ./drivers/crypto/marvell/octeontx2/Makefile:
> cn10k_cpt.o is added to multiple modules: rvu_cptpf rvu_cptvf
> scripts/Makefile.build:252: ./drivers/crypto/marvell/octeontx2/Makefile:
> otx2_cptlf.o is added to multiple modules: rvu_cptpf rvu_cptvf
> scripts/Makefile.build:252: ./drivers/crypto/marvell/octeontx2/Makefile:
> otx2_cpt_mbox_common.o is added to multiple modules: rvu_cptpf rvu_cptvf

Despite they're build under the same Kconfig option
(CONFIG_CRYPTO_DEV_OCTEONTX2_CPT), it's better do link the common
code into a standalone module and export the shared functions. Under
certain circumstances, this can lead to the same situation as fixed
by commit 637a642f5ca5 ("zstd: Fixing mixed module-builtin objects").
Plus, those three common object files are relatively big to duplicate
them several times.

Introduce the new module, rvu_cptcommon, to provide the common
functions to both modules.

Fixes: 19d8e8c7be15 ("crypto: octeontx2 - add virtual function driver support")
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: resource: Do IRQ override on all TongFang GMxRGxx

[ Upstream commit 17bb7046e7ce038a73ee97eaa804e0300c5199e2 ]

Apply commit 7592b79ba4a9 ("ACPI: resource: do IRQ override on XMG Core 15")
override for all vendors using this mainboard.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Fixes: 9946e39fe8d0 ("ACPI: resource: skip IRQ override on AMD Zen platforms")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models

[ Upstream commit cb18703c179713056bd7e3bdfc2260ab4e8658f0 ]

Fix a regression introduced by commit 9946e39fe8d0 ("ACPI: resource: skip
IRQ override on AMD Zen platforms") on MAINGEAR Vector Pro 2 systems, which
causes the built-in keyboard to not work. This restores the functionality
by adding an IRQ override.

No other IRQs were being overridden before, so this should be all that is
needed for these systems. I have personally tested this on the 15" model
(MG-VCP2-15A3070T), and I have confirmation that the issue is present on
the 17" model (MG-VCP2-17A3070T).

Fixes: 9946e39fe8d0 ("ACPI: resource: skip IRQ override on AMD Zen platforms")
Signed-off-by: Adam Niederer <adam.niederer@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Fix out-of-srctree build

[ Upstream commit 0b0757244754ea1d0721195c824770f5576e119e ]

Building BPF selftests out of srctree fails with:

  make: *** No rule to make target '/linux-build//ima_setup.sh', needed by 'ima_setup.sh'.  Stop.

The culprit is the rule that defines convenient shorthands like
"make test_progs", which builds $(OUTPUT)/test_progs. These shorthands
make sense only for binaries that are built though; scripts that live
in the source tree do not end up in $(OUTPUT).

Therefore drop $(TEST_PROGS) and $(TEST_PROGS_EXTENDED) from the rule.

The issue exists for a while, but it became a problem only after commit
d68ae4982cb7 ("selftests/bpf: Install all required files to run selftests"),
which added dependencies on these scripts.

Fixes: 03dcb78460c2 ("selftests/bpf: Add simple per-test targets to Makefile")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230208231211.283606-1-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mwifiex: fix loop iterator in mwifiex_update_ampdu_txwinsize()

[ Upstream commit 3cfb7df24cee0f5fdc4cc5d3176cab9aadfcb430 ]

This code re-uses "i" to be the iterator for both the inside and outside
loops.  It means the outside loop will exit earlier than intended.

Fixes: d219b7eb3792 ("mwifiex: handle BT coex event to adjust Rx BA window size")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/Y+ERnaDaZD7RtLvX@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwl4965: Add missing check for create_singlethread_workqueue()

[ Upstream commit 26e6775f75517ad6844fe5b79bc5f3fa8c22ee61 ]

Add the check for the return value of the create_singlethread_workqueue()
in order to avoid NULL pointer dereference.

Fixes: b481de9ca074 ("[IWLWIFI]: add iwlwifi wireless drivers")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230209010748.45454-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwl3945: Add missing check for create_singlethread_workqueue

[ Upstream commit 1fdeb8b9f29dfd64805bb49475ac7566a3cb06cb ]

Add the check for the return value of the create_singlethread_workqueue
in order to avoid NULL pointer dereference.

Fixes: b481de9ca074 ("[IWLWIFI]: add iwlwifi wireless drivers")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230208063032.42763-2-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use

[ Upstream commit 225b9596cb0227c1c1b1e4a836dad43595c3e61a ]

A static key is used to select between SBI and Sstc timer usage in
riscv_clock_next_event(), but currently the direction is resolved
after cpuhp_setup_state() is called (which sets the next event).  The
first event will therefore fall through the sbi_set_timer() path; this
breaks Sstc-only systems.  So, apply the jump patching before first
use.

Fixes: 9f7a8ff6391f ("RISC-V: Prefer sstc extension if available")
Signed-off-by: Matt Evans <mev@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/CDDAB2D0-264E-42F3-8E31-BA210BEB8EC1@rivosinc.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RISC-V: time: initialize hrtimer based broadcast clock event device

[ Upstream commit 8b3b8fbb4896984b5564789a42240e4b3caddb61 ]

Similarly to commit 022eb8ae8b5e ("ARM: 8938/1: kernel: initialize
broadcast hrtimer based clock event device"), RISC-V needs to initiate
hrtimer based broadcast clock event device before C3STOP can be used.
Otherwise, the introduction of C3STOP for the RISC-V arch timer in
commit 232ccac1bd9b ("clocksource/drivers/riscv: Events are stopped
during CPU suspend") leaves us without any broadcast timer registered.
This prevents the kernel from entering oneshot mode, which breaks timer
behaviour, for example clock_nanosleep().

A test app that sleeps each cpu for 6, 5, 4, 3 ms respectively, HZ=250
& C3STOP enabled, the sleep times are rounded up to the next jiffy:
== CPU: 1 ==      == CPU: 2 ==      == CPU: 3 ==      == CPU: 4 ==
Mean: 7.974992    Mean: 7.976534    Mean: 7.962591    Mean: 3.952179
Std Dev: 0.154374 Std Dev: 0.156082 Std Dev: 0.171018 Std Dev: 0.076193
Hi: 9.472000      Hi: 10.495000     Hi: 8.864000      Hi: 4.736000
Lo: 6.087000      Lo: 6.380000      Lo: 4.872000      Lo: 3.403000
Samples: 521      Samples: 521      Samples: 521      Samples: 521

Link: https://lore.kernel.org/linux-riscv/YzYTNQRxLr7Q9JR0@spud/
Fixes: 232ccac1bd9b ("clocksource/drivers/riscv: Events are stopped during CPU suspend")
Suggested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230103141102.772228-2-apatel@ventanamicro.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68k: /proc/hardware should depend on PROC_FS

[ Upstream commit 1e5b5df65af99013b4d31607ddb3ca5731dbe44d ]

When CONFIG_PROC_FS is not set, there is a build error for an unused
function. Make PROC_HARDWARE depend on PROC_FS to prevent this error.

In file included from ../arch/m68k/kernel/setup.c:3:
../arch/m68k/kernel/setup_mm.c:477:12: error: 'hardware_proc_show' defined but not used [-Werror=unused-function]
  477 | static int hardware_proc_show(struct seq_file *m, void *v)
      |            ^~~~~~~~~~~~~~~~~~

Fixes: 66d857b08b8c ("m68k: merge m68k and m68knommu arch directories") # v3.0
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230209010825.24136-1-rdunlap@infradead.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: rsa-pkcs1pad - Use akcipher_request_complete

[ Upstream commit 564cabc0ca0bdfa8f0fc1ae74b24d0a7554522c5 ]

Use the akcipher_request_complete helper instead of calling the
completion function directly.  In fact the previous code was buggy
in that EINPROGRESS was never passed back to the original caller.

Fixes: 3d5b1ecdea6f ("crypto: rsa - RSA padding algorithm")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>