Johan Hovold [Wed, 13 Jul 2022 13:13:35 +0000 (15:13 +0200)]
dt-bindings: usb: qcom,dwc3: refine interrupt requirements
Not all platforms have all of the four wakeup interrupts currently
described by the bindings.
Specifically, MSM8953/6/8 and SDM660 do not use the DP/DM interrupts,
while the SS PHY interrupt is optional on SDM660 and SC7280.
Note that no devicetree in mainline specify any wakeup interrupts for
- qcom,ipq4019-dwc3
- qcom,ipq6018-dwc3
- qcom,ipq8064-dwc3
- qcom,ipq8074-dwc3
- qcom,msm8994-dwc3
- qcom,qcs404-dwc3
but let's keep the schema warnings about that for now.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220713131340.29401-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Wed, 13 Jul 2022 13:13:34 +0000 (15:13 +0200)]
dt-bindings: usb: qcom,dwc3: add SC8280XP binding
Add SC8280XP to the DT schema.
Note that the SC8280XP controllers use the common set of five clocks and
an additional set of four interconnect clocks whose purpose is not
entirely clear at this point.
The set of wakeup interrupts is also different for SC8280XP.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220713131340.29401-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Ji [Thu, 14 Jul 2022 08:13:50 +0000 (16:13 +0800)]
usb: typec: anx7411: Add Analogix PD ANX7411 support
Add driver for analogix ANX7411 USB Type-C DRP port controller.
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Link: https://lore.kernel.org/r/20220714081350.36447-2-xji@analogixsemi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Ji [Thu, 14 Jul 2022 08:13:49 +0000 (16:13 +0800)]
dt-bindings: usb: Add analogix anx7411 PD binding
Add analogix PD chip anx7411 device binding
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Link: https://lore.kernel.org/r/20220714081350.36447-1-xji@analogixsemi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rohith Kollalsi [Thu, 14 Jul 2022 04:56:25 +0000 (10:26 +0530)]
usb: dwc3: core: Do not perform GCTL_CORE_SOFTRESET during bootup
According to the programming guide, it is recommended to
perform a GCTL_CORE_SOFTRESET only when switching the mode
from device to host or host to device. However, it is found
that during bootup when __dwc3_set_mode() is called for the
first time, GCTL_CORESOFTRESET is done with suspendable bit(BIT 17)
of DWC3_GUSB3PIPECTL set. This some times leads to issues
like controller going into bad state and controller registers
reading value zero. Until GCTL_CORESOFTRESET is done and
run/stop bit is set core initialization is not complete.
Setting suspendable bit of DWC3_GUSB3PIPECTL and then
performing GCTL_CORESOFTRESET is therefore not recommended.
Avoid this by only performing the reset if current_dr_role is set,
that is, when doing subsequent role switching.
Fixes:
f88359e1588b ("usb: dwc3: core: Do core softreset when switch mode")
Signed-off-by: Rohith Kollalsi <quic_rkollals@quicinc.com>
Link: https://lore.kernel.org/r/20220714045625.20377-1-quic_rkollals@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liang He [Wed, 13 Jul 2022 12:05:28 +0000 (20:05 +0800)]
usb: aspeed-vhub: Fix refcount leak bug in ast_vhub_init_desc()
We should call of_node_put() for the reference returned by
of_get_child_by_name() which has increased the refcount.
Fixes:
30d2617fd7ed ("usb: gadget: aspeed: allow to set usb strings in device tree")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220713120528.368168-1-windhl@126.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiangshan Yi [Wed, 13 Jul 2022 07:02:05 +0000 (15:02 +0800)]
usb: ldusb: replace ternary operator with max_t()
Fix the following coccicheck warning:
drivers/usb/misc/ldusb.c:719: WARNING opportunity for max().
drivers/usb/misc/ldusb.c:721: WARNING opportunity for max().
max_t() macro is defined in include/linux/minmax.h. It avoids
multiple evaluations of the arguments when non-constant and performs
strict type-checking.
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Link: https://lore.kernel.org/r/20220713070205.3047256-1-13667453960@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wesley Cheng [Tue, 12 Jul 2022 01:44:03 +0000 (18:44 -0700)]
usb: dwc3: ep0: Properly handle setup_packet_pending scenario in data stage
During a 3 stage SETUP transfer, if the host sends another SETUP token
before completing the status phase, it signifies that the host has aborted
the current control transfer. Currently, if a setup_packet_pending is
received, there are no subsequent calls to dwc3_ep0_out_start() to fetch
the new SETUP packet. This leads to a stall on EP0, as host does not
expect another STATUS phase as it has aborted the current transfer.
Fix this issue by explicitly stalling and restarting EP0, as well as
resetting the trb_enqueue indexes. (without this, there is a chance the
SETUP TRB is set up on trb_endqueue == 1)
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220712014403.2977-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Mon, 11 Jul 2022 16:25:05 +0000 (09:25 -0700)]
usb: misc: onboard_hub: Fix 'missing prototype' warning
When building with 'W=1' the compiler complains about missing
prototypes for onboard_hub_create/destroy_pdevs(). Include the
header with the prototypes to fix this.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220711092431.1.I4016c759fd7fe2b32dd482994a20661f36e2cae3@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nícolas F. R. A. Prado [Fri, 8 Jul 2022 19:26:05 +0000 (15:26 -0400)]
Revert "dt-bindings: usb: mtk-xhci: Make all clocks required"
This reverts commit
ebc4969ae125e65fdb563f66f4bfa7aec95f7eb4. That
commit was supposed to make the binding better reflect the MediaTek XHCI
hardware block by requiring all clocks to be present. But doing that
also causes too much noise in the devicetrees, since it requires
updating old MediaTek DTs to add clock handles for the fixed clocks, and
going forward every new clock added to the binding would require even
more updates.
The commit also didn't update the example to match the changes, causing
additional warnings.
Instead let's keep the clocks optional so that old devicetrees can keep
omitting the fixed clocks, and we'll just add the clocks as required on
new DTs.
Fixes:
ebc4969ae125 ("dt-bindings: usb: mtk-xhci: Make all clocks required")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220708192605.43351-1-nfraprado@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxim Devaev [Mon, 11 Jul 2022 10:29:57 +0000 (13:29 +0300)]
usb: gadget: f_mass_storage: forced_eject attribute
It allows to reset prevent_medium_removal flag and "eject" the image.
This can be useful to free the drive from a hunging host or if the host
continues to use the drive even after unmounting (Linux does this).
It's also a bit like using an unfolded paperclip on an optical drive.
Previously, the undocumented method of sending SIGUSR1 to a special
"file-storage" kernel thread could be used for these purposes,
but when using multiple storages there was no way to distinguish
one from the other, so we had to send a signal to everyone.
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Maxim Devaev <mdevaev@gmail.com>
Link: https://lore.kernel.org/r/20220711102956.19642-1-mdevaev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Sat, 9 Jul 2022 01:36:01 +0000 (18:36 -0700)]
usb: gadget: udc: amd5536 depends on HAS_DMA
USB_AMD5536UDC should depend on HAS_DMA since it selects USB_SNP_CORE,
which depends on HAS_DMA and since 'select' does not follow any
dependency chains.
Fixes this kconfig warning:
WARNING: unmet direct dependencies detected for USB_SNP_CORE
Depends on [n]: USB_SUPPORT [=y] && USB_GADGET [=y] && (USB_AMD5536UDC [=y] || USB_SNP_UDC_PLAT [=n]) && HAS_DMA [=n]
Selected by [y]:
- USB_AMD5536UDC [=y] && USB_SUPPORT [=y] && USB_GADGET [=y] && USB_PCI [=y]
Fixes:
97b3ffa233b9 ("usb: gadget: udc: amd5536: split core and PCI layer")
Cc: Raviteja Garimella <raviteja.garimella@broadcom.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: linux-usb@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220709013601.7536-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Grzeschik [Mon, 4 Jul 2022 14:18:12 +0000 (16:18 +0200)]
usb: dwc3: gadget: fix high speed multiplier setting
For High-Speed Transfers the prepare_one_trb function is calculating the
multiplier setting for the trb based on the length parameter of the trb
currently prepared. This assumption is wrong. For trbs with a sg list,
the length of the actual request has to be taken instead.
Fixes:
40d829fb2ec6 ("usb: dwc3: gadget: Correct ISOC DATA PIDs for short packets")
Cc: stable <stable@kernel.org>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220704141812.1532306-3-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Grzeschik [Mon, 4 Jul 2022 14:18:11 +0000 (16:18 +0200)]
usb: dwc3: gadget: refactor dwc3_repare_one_trb
The function __dwc3_prepare_one_trb has many parameters. Since it is
only used in dwc3_prepare_one_trb there is no point in keeping the
function. We merge both functions and get rid of the big list of
parameters.
Fixes:
40d829fb2ec6 ("usb: dwc3: gadget: Correct ISOC DATA PIDs for short packets")
Cc: stable <stable@kernel.org>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220704141812.1532306-2-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan O'Donoghue [Fri, 8 Jul 2022 11:58:59 +0000 (12:58 +0100)]
tools: usb: testusb: Add super-plus speed reporting
Add the ability to detect and print the USB speed as "super-plus" if/when
the kernel reports that speed.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20220708115859.2095714-4-bryan.odonoghue@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan O'Donoghue [Fri, 8 Jul 2022 11:58:58 +0000 (12:58 +0100)]
tools: usb: testusb: Add super speed reporting
Add the ability to detect and print the USB speed as "super" if/when the
kernel reports that speed.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20220708115859.2095714-3-bryan.odonoghue@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan O'Donoghue [Fri, 8 Jul 2022 11:58:57 +0000 (12:58 +0100)]
tools: usb: testusb: Add wireless speed reporting
Add the ability to detect and print the USB speed as "wireless" if/when the
kernel reports that speed.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20220708115859.2095714-2-bryan.odonoghue@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Thu, 30 Jun 2022 19:35:30 +0000 (12:35 -0700)]
usb: core: hub: Create platform devices for onboard hubs in hub_probe()
Call onboard_hub_create/destroy_pdevs() from hub_probe/disconnect()
to create/destroy platform devices for onboard USB hubs that may be
connected to the hub. The onboard hubs must have nodes in the
device tree.
onboard_hub_create/destroy_pdevs() are NOPs unless
CONFIG_USB_ONBOARD_HUB=y/m.
Also add a field to struct usb_hub to keep track of the onboard hub
platform devices that are owned by the hub.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220630123445.v24.4.Ic9dd36078f9d803de82ca01a6700c58b8e4de27e@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Thu, 30 Jun 2022 19:35:29 +0000 (12:35 -0700)]
usb: misc: Add onboard_usb_hub driver
The main issue this driver addresses is that a USB hub needs to be
powered before it can be discovered. For discrete onboard hubs (an
example for such a hub is the Realtek RTS5411) this is often solved
by supplying the hub with an 'always-on' regulator, which is kind
of a hack. Some onboard hubs may require further initialization
steps, like changing the state of a GPIO or enabling a clock, which
requires even more hacks. This driver creates a platform device
representing the hub which performs the necessary initialization.
Currently it only supports switching on a single regulator, support
for multiple regulators or other actions can be added as needed.
Different initialization sequences can be supported based on the
compatible string.
Besides performing the initialization the driver can be configured
to power the hub off during system suspend. This can help to extend
battery life on battery powered devices which have no requirements
to keep the hub powered during suspend. The driver can also be
configured to leave the hub powered when a wakeup capable USB device
is connected when suspending, and power it off otherwise.
Technically the driver consists of two drivers, the platform driver
described above and a very thin USB driver that subclasses the
generic driver. The purpose of this driver is to provide the platform
driver with the USB devices corresponding to the hub(s) (a hub
controller may provide multiple 'logical' hubs, e.g. one to support
USB 2.0 and another for USB 3.x).
Co-developed-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220630123445.v24.3.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Thu, 30 Jun 2022 19:35:28 +0000 (12:35 -0700)]
dt-bindings: usb: rts5411: Rename property 'companion-hub' to 'peer-hub'
In the context of USB the term 'companion-hub' is misleading, change the
name of the property to 'peer-hub'.
There are no upstream users of the 'companion-hub' property, neither in
the device tree, nor on the driver side, so renaming it shouldn't cause
any compatibility issues with existing device trees.
Changes in v24:
- patch added to the series
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220630123445.v24.2.Ie2bbbd3f690826404b8f1059d24edcab33ed898f@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Thu, 30 Jun 2022 19:35:27 +0000 (12:35 -0700)]
of/platform: Add stubs for of_platform_device_create/destroy()
Code for platform_device_create() and of_platform_device_destroy() is
only generated if CONFIG_OF_ADDRESS=y. Add stubs to avoid unresolved
symbols when CONFIG_OF_ADDRESS is not set.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220630123445.v24.1.I08fd2e1c775af04f663730e9fb4d00e6bbb38541@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chunfeng Yun [Fri, 8 Jul 2022 07:19:03 +0000 (15:19 +0800)]
usb: mtu3: support function remote wakeup
Add function wake notification to support function remote wakeup,
currently assume the composite device only enable function wake
for the first interface.
Forward request to function driver when the recipient is an interface,
including:
GetStatus() request to the first interface in a function returns the
information about 'function remote wakeup' and 'function remote wakeup
capalbe';
SetFeature request of FUNCTION_SUSPEND to an interface recipient, the
controller driver saves the suspend option;
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220708071903.25752-5-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chunfeng Yun [Fri, 8 Jul 2022 07:19:02 +0000 (15:19 +0800)]
usb: mtu3: check capability of usb3 dual role
It is capable of supporting usb3 dual role if there is at least one
usb3 port for device and xhci controller, we can check it from the
controller's capability, so no need the property "mediatek,usb3-drd"
anymore, but I find the property is not decribed in dt-binding.
Meanwhile, also take into account if the u3 port is disabled when the
u3 phy is shared with pcie.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220708071903.25752-4-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chunfeng Yun [Fri, 8 Jul 2022 07:19:01 +0000 (15:19 +0800)]
usb: mtu3: add feature to disable device's usb3 port
We may want to disable device's usb3 port when the combo phy is switched
from usb3 mode to pcie mode for some projects.
Meanwhile rename member @is_u3_ip to @u3_capable to avoid misleading, due
to the member's value may be changed when disable usb3 port, but the
controller is still a usb3 IP which also tells us how to manage the fifo.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220708071903.25752-3-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chunfeng Yun [Fri, 8 Jul 2022 07:19:00 +0000 (15:19 +0800)]
usb: mtu3: print endpoint type as string
Print endpoint type as string instead of decimal value to make
the log more readable.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220708071903.25752-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Ji [Wed, 6 Jul 2022 08:34:31 +0000 (16:34 +0800)]
usb: typec: tcpci: move tcpci.h to include/linux/usb/
USB PD controllers which consisting of a microcontroller (acting as the TCPM)
and a port controller (TCPC) - may require that the driver for the PD
controller accesses directly also the on-chip port controller in some cases.
Move tcpci.h to include/linux/usb/ is convenience access TCPC registers.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Link: https://lore.kernel.org/r/20220706083433.2415524-1-xji@analogixsemi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jozef Martiniak [Fri, 8 Jul 2022 07:06:44 +0000 (09:06 +0200)]
gadgetfs: ep_io - wait until IRQ finishes
after usb_ep_queue() if wait_for_completion_interruptible() is
interrupted we need to wait until IRQ gets finished.
Otherwise complete() from epio_complete() can corrupt stack.
Signed-off-by: Jozef Martiniak <jomajm@gmail.com>
Link: https://lore.kernel.org/r/20220708070645.6130-1-jomajm@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chunfeng Yun [Thu, 7 Jul 2022 01:50:41 +0000 (09:50 +0800)]
dt-bindings: usb: mtk-xhci: add compatible for mt8188
Add compatible for mt8188
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220707015041.12264-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Walle [Tue, 5 Jul 2022 13:19:51 +0000 (15:19 +0200)]
usb: gadget: udc: atmel: convert to platform driver
The driver won't probe on a LAN9668 because the pinctrl driver isn't
ready yet. Probe deferral is not supported because the init section
is already discarded. With fw_devlink enabled, the probe won't even
be called. Convert the driver to a proper platform driver.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220705131951.1388968-2-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Walle [Tue, 5 Jul 2022 13:19:50 +0000 (15:19 +0200)]
usb: gadget: udc: atmel: check rc of devm_gpiod_get_optional()
devm_gpiod_get_optional() might still return an error code, esp.
EPROBE_DEFER. Return any errors.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220705131951.1388968-1-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Google) [Sun, 3 Jul 2022 13:14:49 +0000 (09:14 -0400)]
USB: gadget: udc: tracing: Do not open code __string() with __dynamic_array()
The event classes udc_log_ep and udc_log_req both declare:
__dynamic_array(char, name, UDC_TRACE_STR_MAX)
Which will reserve UDC_TRACE_STR_MAX bytes on the ring buffer for the
event to write in name. It then uses snprintf() to write into that space.
Assuming that the string being copied is nul terminated, it is better to
just use the __string() helper. That way only the size of the string is
saved into the ring buffer and not the max size (yes, the entire
UDC_TRACE_STR_MAX is used in the trace event, and anything not used is
just junk in the ring buffer). Worse, there's also meta data saved into
the event that denotes where the string is stored in the event and also
saves its size, which is always going to be UDC_TRACE_STR_MAX.
Convert both to use the __string() and __assign_str() helpers that are for
this kind of use case.
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20220703091449.317f94b1@rorschach.local.home
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herve Codina [Fri, 1 Jul 2022 07:09:27 +0000 (09:09 +0200)]
dt-bindings: usb: atmel: Add Microchip LAN9662 compatible string
The USB device controller available in the Microchip LAN9662 SOC
is the same IP as the one present in the SAMA5D3 SOC.
Add the LAN9662 compatible string and set the SAMA5D3 compatible
string as a fallback for the LAN9662.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220701070928.459135-3-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergey Shtylyov [Thu, 30 Jun 2022 12:46:45 +0000 (15:46 +0300)]
usb: host: xhci: use snprintf() in xhci_decode_trb()
Commit
cbf286e8ef83 ("xhci: fix unsafe memory usage in xhci tracing")
apparently missed one sprintf() call in xhci_decode_trb() -- replace
it with the snprintf() call as well...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Fixes:
cbf286e8ef83 ("xhci: fix unsafe memory usage in xhci tracing")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220630124645.1805902-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Neal Liu [Tue, 28 Jun 2022 02:14:36 +0000 (10:14 +0800)]
usb: gadget: f_mass_storage: Make CD-ROM emulation works with Windows OS
Add read TOC with format 1 to support CD-ROM emulation with
Windows OS.
This patch is tested on Windows OS Server 2019.
Fixes:
89ada0fe669a ("usb: gadget: f_mass_storage: Make CD-ROM emulation work with Mac OS-X")
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Link: https://lore.kernel.org/r/20220628021436.3252262-1-neal_liu@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Neukum [Wed, 29 Jun 2022 13:26:38 +0000 (15:26 +0200)]
USB: cdc-acm: use define for timeout
We have a symbolic name for the standard timeout.
Use it. No functional change intended.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220629132638.31810-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yang Yingliang [Tue, 28 Jun 2022 14:05:27 +0000 (22:05 +0800)]
usb: musb: mpfs: add missing clk_disable_unprepare() in mpfs_remove()
clock source is prepared and enabled by clk_prepare_enable()
in probe function, but no disable or unprepare in remove.
Fixes:
7a96b6ea90a4 ("usb: musb: Add support for PolarFire SoC's musb controller")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220628140527.1404439-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 28 Jun 2022 08:21:43 +0000 (11:21 +0300)]
usb: gadget: aspeed_udc: fix handling of tx_len == 0
The bug is that we should still enter this loop if "tx_len" is zero.
After adding the "last" variable, then the "chunk >= 0" condition is no
longer required but I left it for readability.
Fixes:
c09b1f372e74 ("usb: gadget: aspeed_udc: cleanup loop in ast_dma_descriptor_setup()")
Reported-by: Neal Liu <neal_liu@aspeedtech.com>
Reviewed-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Yrq6F5okoX1y05rT@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mauro Carvalho Chehab [Tue, 28 Jun 2022 09:46:26 +0000 (10:46 +0100)]
usb: dwc3: gadget: fix a kernel-doc warning
The multiplier parameter of dwc3_gadget_calc_tx_fifo_size() was
not documented:
drivers/usb/dwc3/gadget.c:675: warning: Function parameter or member 'mult' not described in 'dwc3_gadget_calc_tx_fifo_size'
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/bd599a18cea45c57d91c69d3e30d8b1e8ea69dd1.1656409369.git.mchehab@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mauro Carvalho Chehab [Tue, 28 Jun 2022 09:46:25 +0000 (10:46 +0100)]
usb: dwc3: document async_callbacks field
Avoid a kernel-doc warning by documenting it:
drivers/usb/dwc3/core.h:1328: warning: Function parameter or member 'async_callbacks' not described in 'dwc3'
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/2c3de5935934baec097286f525ce4beff0a31ec0.1656409369.git.mchehab@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mauro Carvalho Chehab [Tue, 28 Jun 2022 09:46:24 +0000 (10:46 +0100)]
usb: typec_altmode: add a missing "@" at a kernel-doc parameter
Without that, the parameter is not properly parsed:
include/linux/usb/typec_altmode.h:132: warning: Function parameter or member 'altmode' not described in 'typec_altmode_get_orientation'
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/70dc4c5d744cf1fe9a0efe6b85deaa0489628282.1656409369.git.mchehab@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 28 Jun 2022 14:02:17 +0000 (16:02 +0200)]
Merge tag 'thunderbolt-for-v5.20-rc1' of git://git./linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v5.20 merge window
This includes following Thunderbolt/USB4 changes for the v5.20 merge
window:
* Enable CL1 low power link state
* Add support for Intel Raptor Lake Thunderbolt/USB4 controller
* A couple of typos fixed.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Fix typo in comment
thunderbolt: Add support for Intel Raptor Lake
thunderbolt: Fix some kernel-doc comments
thunderbolt: Change TMU mode to HiFi uni-directional once DisplayPort tunneled
thunderbolt: Add CL1 support for USB4 and Titan Ridge routers
thunderbolt: Change downstream router's TMU rate in both TMU uni/bidir mode
thunderbolt: Fix typos in CLx enabling
thunderbolt: CLx disable before system suspend only if previously enabled
thunderbolt: Silently ignore CLx enabling in case CLx is not supported
Nícolas F. R. A. Prado [Thu, 23 Jun 2022 19:37:00 +0000 (15:37 -0400)]
dt-bindings: usb: mtk-xhci: Make all clocks required
All of the clocks listed in the binding are always wired to the XHCI
controller hardware blocks on all SoCs. The reason some clocks were made
optional in the binding was to account for the fact that depending on
the SoC, some of the clocks might be fixed (ie not controlled by
software).
Given that the devicetree should represent the hardware, make all clocks
required in the binding. Subsequent patches will make the DTS changes to
specify fixed-clocks for the clocks that aren't controllable.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220623193702.817996-3-nfraprado@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nícolas F. R. A. Prado [Thu, 23 Jun 2022 19:36:59 +0000 (15:36 -0400)]
dt-bindings: usb: mtk-xhci: Allow wakeup interrupt-names to be optional
Add missing "minItems: 1" to the interrupt-names property to allow the
second interrupt-names, "wakeup", to be optional.
Fixes:
fe8e488058c4 ("dt-bindings: usb: mtk-xhci: add wakeup interrupt")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220623193702.817996-2-nfraprado@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xuezhi Zhang [Fri, 24 Jun 2022 12:12:38 +0000 (20:12 +0800)]
usb: core: sysfs: convert sysfs snprintf to sysfs_emit
Fix up all sysfs show entries to use sysfs_emit
Signed-off-by: Xuezhi Zhang <zhangxuezhi1@coolpad.com>
Link: https://lore.kernel.org/r/20220624121238.134256-1-zhangxuezhi1@coolpad.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 27 Jun 2022 08:03:28 +0000 (10:03 +0200)]
Merge 5.19-rc4 into usb-next
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 26 Jun 2022 21:22:10 +0000 (14:22 -0700)]
Linux 5.19-rc4
Linus Torvalds [Sun, 26 Jun 2022 21:12:56 +0000 (14:12 -0700)]
Merge tag 'soc-fixes-5.19' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A number of fixes have accumulated, but they are largely for harmless
issues:
- Several OF node leak fixes
- A fix to the Exynos7885 UART clock description
- DTS fixes to prevent boot failures on TI AM64 and J721s2
- Bus probe error handling fixes for Baikal-T1
- A fixup to the way STM32 SoCs use separate dts files for different
firmware stacks
- Multiple code fixes for Arm SCMI firmware, all dealing with
robustness of the implementation
- Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT
nodes
- Three updates to the MAINTAINERS file, including Florian Fainelli
taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz
Julienne"
* tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom
arm: mach-spear: Add missing of_node_put() in time.c
ARM: cns3xxx: Fix refcount leak in cns3xxx_init
MAINTAINERS: Update email address
arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode
arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region
ARM: dts: bcm2711-rpi-400: Fix GPIO line names
bus: bt1-axi: Don't print error on -EPROBE_DEFER
bus: bt1-apb: Don't print error on -EPROBE_DEFER
ARM: Fix refcount leak in axxia_boot_secondary
ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15
soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain
ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity
ARM: dts: imx6qdl: correct PU regulator ramp delay
firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get
firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary
firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported
ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node
soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
MAINTAINERS: Update BCM2711/BCM2835 maintainer
...
Linus Torvalds [Sun, 26 Jun 2022 21:00:55 +0000 (14:00 -0700)]
Merge tag 'mm-hotfixes-stable-2022-06-26' of git://git./linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.
Fixes for this merge window:
- fix for a damon boot hang, from SeongJae
- fix for a kfence warning splat, from Jason Donenfeld
- fix for zero-pfn pinning, from Alex Williamson
- fix for fallocate hole punch clearing, from Mike Kravetz
Fixes for previous releases:
- fix for a performance regression, from Marcelo
- fix for a hwpoisining BUG from zhenwei pi"
* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Christian Marangi
mm/memory-failure: disable unpoison once hw error happens
hugetlbfs: zero partial pages during fallocate hole punch
mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
mm: re-allow pinning of zero pfns
mm/kfence: select random number before taking raw lock
MAINTAINERS: add maillist information for LoongArch
MAINTAINERS: update MM tree references
MAINTAINERS: update Abel Vesa's email
MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
mailmap: add alias for jarkko@profian.com
mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
mm: lru_cache_disable: use synchronize_rcu_expedited
mm/page_isolation.c: fix one kernel-doc comment
Linus Torvalds [Sun, 26 Jun 2022 19:12:25 +0000 (12:12 -0700)]
Merge tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Enable ignore_missing_thread in 'perf stat', enabling counting with
'--pid' when threads disappear during counting session setup
- Adjust output data offset for backward compatibility in 'perf inject'
- Fix missing free in copy_kcore_dir() in 'perf inject'
- Fix caching files with a wrong build ID
- Sync drm, cpufeatures, vhost and svn headers with the kernel
* tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
tools headers UAPI: Synch KVM's svm.h header with the kernel
tools include UAPI: Sync linux/vhost.h with the kernel sources
perf stat: Enable ignore_missing_thread
perf inject: Adjust output data offset for backward compatibility
perf trace beauty: Fix generation of errno id->str table on ALT Linux
perf build-id: Fix caching files with a wrong build ID
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
perf inject: Fix missing free in copy_kcore_dir()
Linus Torvalds [Sun, 26 Jun 2022 17:11:36 +0000 (10:11 -0700)]
Merge tag 'for-5.19-rc3-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- zoned relocation fixes:
- fix critical section end for extent writeback, this could lead
to out of order write
- prevent writing to previous data relocation block group if space
gets low
- reflink fixes:
- fix race between reflinking and ordered extent completion
- proper error handling when block reserve migration fails
- add missing inode iversion/mtime/ctime updates on each iteration
when replacing extents
- fix deadlock when running fsync/fiemap/commit at the same time
- fix false-positive KCSAN report regarding pid tracking for read locks
and data race
- minor documentation update and link to new site
* tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Documentation: update btrfs list of features and link to readthedocs.io
btrfs: fix deadlock with fsync+fiemap+transaction commit
btrfs: don't set lock_owner when locking extent buffer for reading
btrfs: zoned: fix critical section of relocation inode writeback
btrfs: zoned: prevent allocation from previous data relocation BG
btrfs: do not BUG_ON() on failure to migrate space when replacing extents
btrfs: add missing inode updates on each iteration when replacing extents
btrfs: fix race between reflinking and ordered extent completion
Linus Torvalds [Sun, 26 Jun 2022 17:01:40 +0000 (10:01 -0700)]
Merge tag 'dma-mapping-5.19-2022-06-26' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- pass the correct size to dma_set_encrypted() when freeing memory
(Dexuan Cui)
* tag 'dma-mapping-5.19-2022-06-26' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: use the correct size for dma_set_encrypted()
Linus Torvalds [Sun, 26 Jun 2022 16:13:51 +0000 (09:13 -0700)]
Merge tag 'for-5.19/fbdev-2' of git://git./linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"Two bug fixes for the pxa3xx and intelfb drivers:
- pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
- intelfb: Initialize value of stolen size
The other changes are small cleanups, simplifications and
documentation updates to the cirrusfb, skeletonfb, omapfb,
intelfb, au1100fb and simplefb drivers"
* tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
video: fbdev: omap: Remove duplicate 'the' in comment
video: fbdev: omapfb: Align '*' in comment
video: fbdev: simplefb: Check before clk_put() not needed
video: fbdev: au1100fb: Drop unnecessary NULL ptr check
video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
video: fbdev: skeletonfb: Convert to generic power management
video: fbdev: cirrusfb: Remove useless reference to PCI power management
video: fbdev: intelfb: Initialize value of stolen size
video: fbdev: intelfb: Use aperture size from pci_resource_len
video: fbdev: skeletonfb: Fix syntax errors in comments
Linus Torvalds [Sun, 26 Jun 2022 16:08:30 +0000 (09:08 -0700)]
Merge tag 'for-5.19/parisc-3' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- enable ARCH_HAS_STRICT_MODULE_RWX to prevent a boot crash on c8000
machines
- flush all mappings of a shared anonymous page on PA8800/8900 machines
via flushing the whole data cache. This may slow down such machines
but makes sure that the cache is consistent
- Fix duplicate definition build error regarding fb_is_primary_device()
* tag 'for-5.19/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Enable ARCH_HAS_STRICT_MODULE_RWX
parisc: Fix flush_anon_page on PA8800/PA8900
parisc: align '*' in comment in math-emu code
parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI
Linus Torvalds [Sun, 26 Jun 2022 15:59:21 +0000 (08:59 -0700)]
Merge tag 'xtensa-
20220626' of https://github.com/jcmvbkbc/linux-xtensa
Pull xtensa fixes from Max Filippov:
- fix OF reference leaks in xtensa arch code
- replace '.bss' with '.section .bss' to fix entry.S build with old
assembler
* tag 'xtensa-
20220626' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: change '.bss' to '.section .bss'
xtensa: xtfpga: Fix refcount leak bug in setup
xtensa: Fix refcount leak bug in time.c
Linus Torvalds [Sun, 26 Jun 2022 15:53:20 +0000 (08:53 -0700)]
Merge tag 'powerpc-5.19-3' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A fix for a CMA change that broke booting guests with > 2G RAM on
Power8 hosts.
- Fix the RTAS call filter to allow a special case that applications
rely on.
- A change to our execve path, to make the execve syscall exit
tracepoint work.
- Three fixes to wire up our various RNGs earlier in boot so they're
available for use in the initial seeding in random_init().
- A build fix for when KASAN is enabled along with
STRUCTLEAK_BYREF_ALL.
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Christophe Leroy, Jason
Donenfeld, Nathan Lynch, Naveen N. Rao, Sathvika Vasireddy, Sumit
Dubey2, Tyrel Datwyler, and Zi Yan.
* tag 'powerpc-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: wire up rng during setup_arch
powerpc/prom_init: Fix build failure with GCC_PLUGIN_STRUCTLEAK_BYREF_ALL and KASAN
powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address
powerpc: Enable execve syscall exit tracepoint
powerpc/pseries: wire up rng during setup_arch()
powerpc/microwatt: wire up rng during setup_arch()
powerpc/mm: Move CMA reservations after initmem_init()
Linus Torvalds [Sun, 26 Jun 2022 15:47:28 +0000 (08:47 -0700)]
Merge tag 'kbuild-fixes-v5.19-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix modpost to detect EXPORT_SYMBOL marked as __init or__exit
- Update the supported arch list in the LLVM document
- Avoid the second link of vmlinux for CONFIG_TRIM_UNUSED_KSYMS
- Avoid false __KSYM___this_module define in include/generated/autoksyms.h
* tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Ignore __this_module in gen_autoksyms.sh
kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt)
Documentation/llvm: Update Supported Arch table
modpost: fix section mismatch check for exported init/exit sections
Linus Torvalds [Sun, 26 Jun 2022 15:41:04 +0000 (08:41 -0700)]
Merge tag 'exfat-for-5.19-rc4' of git://git./linux/kernel/git/linkinjeon/exfat
Pull exfat fix from Namjae Jeon:
- Use updated exfat_chain directly instead of snapshot values in
rename.
* tag 'exfat-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: use updated exfat_chain directly during renaming
Linus Torvalds [Sun, 26 Jun 2022 15:34:52 +0000 (08:34 -0700)]
Merge tag '5.19-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Fixes addressing important multichannel, and reconnect issues.
Multichannel mounts when the server network interfaces changed, or ip
addresses changed, uncovered problems, especially in reconnect, but
the patches for this were held up until recently due to some lock
conflicts that are now addressed.
Included in this set of fixes:
- three fixes relating to multichannel reconnect, dynamically
adjusting the list of server interfaces to avoid problems during
reconnect
- a lock conflict fix related to the above
- two important fixes for negotiate on secondary channels (null
netname can unintentionally cause multichannel to be disabled to
some servers)
- a reconnect fix (reporting incorrect IP address in some cases)"
* tag '5.19-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update cifs_ses::ip_addr after failover
cifs: avoid deadlocks while updating iface
cifs: periodically query network interfaces from server
cifs: during reconnect, update interface if necessary
cifs: change iface_list from array to sorted linked list
smb3: use netname when available on secondary channels
smb3: fix empty netname context on secondary channels
Arnaldo Carvalho de Melo [Mon, 21 Dec 2020 23:04:45 +0000 (20:04 -0300)]
tools headers UAPI: Synch KVM's svm.h header with the kernel
To pick up the changes from:
d5af44dde5461d12 ("x86/sev: Provide support for SNP guest request NAEs")
0afb6b660a6b58cb ("x86/sev: Use SEV-SNP AP creation to start secondary CPUs")
dc3f3d2474b80eae ("x86/mm: Validate memory when changing the C-bit")
cbd3d4f7c4e5a93e ("x86/sev: Check SEV-SNP features support")
That gets these new SVM exit reasons:
+ { SVM_VMGEXIT_PSC, "vmgexit_page_state_change" }, \
+ { SVM_VMGEXIT_GUEST_REQUEST, "vmgexit_guest_request" }, \
+ { SVM_VMGEXIT_EXT_GUEST_REQUEST, "vmgexit_ext_guest_request" }, \
+ { SVM_VMGEXIT_AP_CREATION, "vmgexit_ap_creation" }, \
+ { SVM_VMGEXIT_HV_FEATURES, "vmgexit_hypervisor_feature" }, \
Addressing this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
This causes these changes:
CC /tmp/build/perf-urgent/arch/x86/util/kvm-stat.o
LD /tmp/build/perf-urgent/arch/x86/util/perf-in.o
LD /tmp/build/perf-urgent/arch/x86/perf-in.o
LD /tmp/build/perf-urgent/arch/perf-in.o
LD /tmp/build/perf-urgent/perf-in.o
LINK /tmp/build/perf-urgent/perf
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 14 Apr 2020 12:12:55 +0000 (09:12 -0300)]
tools include UAPI: Sync linux/vhost.h with the kernel sources
To get the changes in:
84d7c8fd3aade2fe ("vhost-vdpa: introduce uAPI to set group ASID")
2d1fcb7758e49fd9 ("vhost-vdpa: uAPI to get virtqueue group id")
a0c95f201170bd55 ("vhost-vdpa: introduce uAPI to get the number of address spaces")
3ace88bd37436abc ("vhost-vdpa: introduce uAPI to get the number of virtqueue groups")
175d493c3c3e09a3 ("vhost: move the backend feature bits to vhost_types.h")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
To pick up these changes and support them:
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2022-06-26 12:04:35.
982003781 -0300
+++ after 2022-06-26 12:04:43.
819972476 -0300
@@ -28,6 +28,7 @@
[0x74] = "VDPA_SET_CONFIG",
[0x75] = "VDPA_SET_VRING_ENABLE",
[0x77] = "VDPA_SET_CONFIG_CALL",
+ [0x7C] = "VDPA_SET_GROUP_ASID",
};
static const char *vhost_virtio_ioctl_read_cmds[] = {
[0x00] = "GET_FEATURES",
@@ -39,5 +40,8 @@
[0x76] = "VDPA_GET_VRING_NUM",
[0x78] = "VDPA_GET_IOVA_RANGE",
[0x79] = "VDPA_GET_CONFIG_SIZE",
+ [0x7A] = "VDPA_GET_AS_NUM",
+ [0x7B] = "VDPA_GET_VRING_GROUP",
[0x80] = "VDPA_GET_VQS_COUNT",
+ [0x81] = "VDPA_GET_GROUP_NUM",
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Gautam Dawar <gautam.dawar@xilinx.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Yrh3xMYbfeAD0MFL@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Gang Li [Wed, 22 Jun 2022 03:00:37 +0000 (11:00 +0800)]
perf stat: Enable ignore_missing_thread
perf already support ignore_missing_thread for -p, but not yet
applied to `perf stat -p <pid>`. This patch enables ignore_missing_thread
for `perf stat -p <pid>`.
Committer notes:
And here is a refresher about the 'ignore_missing_thread' knob, from a
previous patch using it:
ca8000684ec4e66f ("perf evsel: Enable ignore_missing_thread for pid option")
---
While monitoring a multithread process with pid option, perf sometimes
may return sys_perf_event_open failure with 3(No such process) if any of
the process's threads die before we open the event. However, we want
perf continue monitoring the remaining threads and do not exit with
error.
---
Signed-off-by: Gang Li <ligang.bdlg@bytedance.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220622030037.15005-1-ligang.bdlg@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Raul Silvera [Tue, 21 Jun 2022 15:27:25 +0000 (15:27 +0000)]
perf inject: Adjust output data offset for backward compatibility
When 'perf inject' creates a new file, it reuses the data offset from
the input file. If there has been a change on the size of the header, as
happened in v5.12 -> v5.13, the new offsets will be wrong, resulting in
a corrupted output file.
This change adds the function perf_session__data_offset to compute the
data offset based on the current header size, and uses that instead of
the offset from the original input file.
Signed-off-by: Raul Silvera <rsilvera@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220621152725.2668041-1-rsilvera@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 21 Jun 2022 15:34:37 +0000 (12:34 -0300)]
perf trace beauty: Fix generation of errno id->str table on ALT Linux
For some reason using:
cat <<EoFuncBegin
static const char *errno_to_name__$arch(int err)
{
switch (err) {
EoFuncBegin
In tools/perf/trace/beauty/arch_errno_names.sh isn't working on ALT
Linux sisyphus (development version), which could be some distro
specific glitch, so just get this done in an alternative way that works
everywhere while giving notice to the people working on that distro to
try and figure our what really took place.
Cc: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 21 Jun 2022 12:51:44 +0000 (15:51 +0300)]
perf build-id: Fix caching files with a wrong build ID
Build ID events associate a file name with a build ID. However, when
using perf inject, there is no guarantee that the file on the current
machine at the current time has that build ID. Fix by comparing the
build IDs and skip adding to the cache if they are different.
Example:
$ echo "int main() {return 0;}" > prog.c
$ gcc -o prog prog.c
$ perf record --buildid-all ./prog
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.019 MB perf.data ]
$ file-buildid() { file $1 | awk -F= '{print $2}' | awk -F, '{print $1}' ; }
$ file-buildid prog
444ad9be165d8058a48ce2ffb4e9f55854a3293e
$ file-buildid ~/.debug/$(pwd)/prog/
444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf
444ad9be165d8058a48ce2ffb4e9f55854a3293e
$ echo "int main() {return 1;}" > prog.c
$ gcc -o prog prog.c
$ file-buildid prog
885524d5aaa24008a3e2b06caa3ea95d013c0fc5
Before:
$ perf buildid-cache --purge $(pwd)/prog
$ perf inject -i perf.data -o junk
$ file-buildid ~/.debug/$(pwd)/prog/
444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf
885524d5aaa24008a3e2b06caa3ea95d013c0fc5
$
After:
$ perf buildid-cache --purge $(pwd)/prog
$ perf inject -i perf.data -o junk
$ file-buildid ~/.debug/$(pwd)/prog/
444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf
$
Fixes:
454c407ec17a0c63 ("perf: add perf-inject builtin")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: https://lore.kernel.org/r/20220621125144.5623-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 1 Jul 2021 16:39:15 +0000 (13:39 -0300)]
tools headers cpufeatures: Sync with the kernel sources
To pick the changes from:
d6d0c7f681fda1d0 ("x86/cpufeatures: Add PerfMonV2 feature bit")
296d5a17e793956f ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts")
f30903394eb62316 ("x86/cpufeatures: Add virtual TSC_AUX feature bit")
8ad7e8f696951f19 ("x86/fpu/xsave: Support XSAVEC in the kernel")
59bd54a84d15e933 ("x86/tdx: Detect running as a TDX guest in early boot")
a77d41ac3a0f41c8 ("x86/cpufeatures: Add AMD Fam19h Branch Sampling feature")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YrDkgmwhLv+nKeOo@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 13 Nov 2021 14:08:31 +0000 (11:08 -0300)]
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
To pick up the changes in:
ecf8eca51f33dbfd ("drm/i915/xehp: Add compute engine ABI")
991b4de3275728fd ("drm/i915/uapi: Add kerneldoc for engine class enum")
c94fde8f516610b0 ("drm/i915/uapi: Add DRM_I915_QUERY_GEOMETRY_SUBSLICES")
1c671ad753dbbf5f ("drm/i915/doc: Link query items to their uapi structs")
a2e5402691e23269 ("drm/i915/doc: Convert perf UAPI comments to kerneldoc")
462ac1cdf4d7acf1 ("drm/i915/doc: Convert drm_i915_query_topology_info comment to kerneldoc")
034d47b25b2ce627 ("drm/i915/uapi: Document DRM_I915_QUERY_HWCONFIG_BLOB")
78e1fb3112c0ac44 ("drm/i915/uapi: Add query for hwconfig blob")
That don't add any new ioctl, so no changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: John Harrison <John.C.Harrison@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://lore.kernel.org/lkml/YrDi4ALYjv9Mdocq@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Mon, 20 Jun 2022 10:39:04 +0000 (13:39 +0300)]
perf inject: Fix missing free in copy_kcore_dir()
Free string allocated by asprintf().
Fixes:
d8fc08550929bb84 ("perf inject: Keep a copy of kcore_dir")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220620103904.7960-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Helge Deller [Sun, 26 Jun 2022 09:50:43 +0000 (11:50 +0200)]
parisc: Enable ARCH_HAS_STRICT_MODULE_RWX
Fix a boot crash on a c8000 machine as reported by Dave. Basically it changes
patch_map() to return an alias mapping to the to-be-patched code in order to
prevent writing to write-protected memory.
Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v5.2+
Link: https://lore.kernel.org/all/e8ec39e8-25f8-e6b4-b7ed-4cb23efc756e@bell.net/
John David Anglin [Sat, 18 Jun 2022 15:14:34 +0000 (15:14 +0000)]
parisc: Fix flush_anon_page on PA8800/PA8900
Anonymous pages are allocated with the shared mappings colouring,
SHM_COLOUR. Since the alias boundary on machines with PA8800 and
PA8900 processors is unknown, flush_user_cache_page() might not
flush all mappings of a shared anonymous page. Flushing the whole
data cache flushes all mappings.
This won't fix all coherency issues with shared mappings but it
seems to work well in practice. I haven't seen any random memory
faults in almost a month on a rp3440 running as a debian buildd
machine.
There is a small preformance hit.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.18+
Jiang Jian [Tue, 21 Jun 2022 06:38:23 +0000 (14:38 +0800)]
parisc: align '*' in comment in math-emu code
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Sami Tolvanen [Thu, 16 Jun 2022 19:57:59 +0000 (19:57 +0000)]
kbuild: Ignore __this_module in gen_autoksyms.sh
Module object files can contain an undefined reference to __this_module,
which isn't resolved until we link the final .ko. The kernel doesn't
export this symbol, so ignore it in gen_autoksyms.sh.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Steve Muckle <smuckle@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Ramji Jiyani <ramjiyani@google.com>
Masahiro Yamada [Thu, 23 Jun 2022 19:11:47 +0000 (04:11 +0900)]
kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt)
If CONFIG_TRIM_UNUSED_KSYMS is enabled and the kernel is built from
a pristine state, the vmlinux is linked twice.
Commit
3fdc7d3fe4c0 ("kbuild: link vmlinux only once for
CONFIG_TRIM_UNUSED_KSYMS") explains why this happens, but it did not fix
the issue at all.
Now I realized I had applied a wrong patch.
In v1 patch [1], the autoksyms_recursive target correctly recurses to
"$(MAKE) -f $(srctree)/Makefile autoksyms_recursive".
In v2 patch [2], I accidentally dropped the diff line, and it recurses to
"$(MAKE) -f $(srctree)/Makefile vmlinux".
Restore the code I intended in v1.
[1]: https://lore.kernel.org/linux-kbuild/
1521045861-22418-8-git-send-email-yamada.masahiro@socionext.com/
[2]: https://lore.kernel.org/linux-kbuild/
1521166725-24157-8-git-send-email-yamada.masahiro@socionext.com/
Fixes:
3fdc7d3fe4c0 ("kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Linus Torvalds [Sat, 25 Jun 2022 17:07:36 +0000 (10:07 -0700)]
Merge tag 'char-misc-5.19-rc4' of git://git./linux/kernel/git/gregkh/char-misc
Pull IIO driver fixes from Greg KH:
"Here are a set of IIO driver fixes for 5.19-rc4. Jonathan said it best
in his pull request to me, so I'll just quote it here below, as that's
the only changes we have right now for the char-misc driver tree:
testing:
- Fix a missing MODULE_LICENSE() warning by restricting possible
build configs.
Various drivers:
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
adi,admv1014:
- Fix dubious x & !y warning.
adi,axi-adc:
- Fix missing of_node_put() in error and normal paths.
aspeed,adc:
- Add missing of_node_put()
fsl,mma8452:
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset
as ACK will be missing (device reset before sending it).
fsl,vf610:
- Fix documentation of in_conversion_mode ABI.
iio-trig-sysfs:
- Ensure irq work has finished before freeing the trigger.
invensense,mpu3050:
- Disable regulators in error path.
invensense,icm42600:
- Fix collision of enum value of 0 with error path where 0 is no
match.
renesas,rzg2l_Adc:
- Add missing fwnode_handle_put() in error path.
rescale:
- Fix a boolean logic bug for detection of raw + scale affecting
an obscure corner case.
semtech,sx9324:
- Check return value of read of pin_defs
st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't
expose the vref_int channel.
- Fix maximum clock rate for stm32pm15x
ti,ads131e08:
- Add missing fwnode_handle_put() in error paths.
xilinx,ams:
- Fix variable checked for error from platform_get_irq()
x-powers,axp288:
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
yamaha,yas530:
- Fix inverted check on calibration data being all zeros.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
iio: accel: mma8452: ignore the return value of reset operation
iio: adc: stm32: fix maximum clock rate for stm32mp15x
iio: adc: stm32: fix vrefint wrong calibration value handling
iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
iio: adc: vf610: fix conversion mode sysfs node name
iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m
iio:humidity:hts221: rearrange iio trigger get and register
iio:chemical:ccs811: rearrange iio trigger get and register
iio:accel:mxc4005: rearrange iio trigger get and register
iio:accel:kxcjk-1013: rearrange iio trigger get and register
iio:accel:bma180: rearrange iio trigger get and register
iio: afe: rescale: Fix boolean logic bug
iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
iio: adc: stm32: Fix ADCs iteration in irq handler
iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
iio: trigger: sysfs: fix use-after-free on remove
...
Linus Torvalds [Sat, 25 Jun 2022 17:02:05 +0000 (10:02 -0700)]
Merge tag 'usb-5.19-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 5.19-rc4
for a few small reported issues. They include:
- new usb-serial driver ids
- MAINTAINERS file update to properly catch the USB dts files
- dt-bindings fixes for reported build warnings
- xhci driver fixes for reported problems
- typec Kconfig dependancy fix
- raw_gadget fuzzing fixes found by syzbot
- chipidea driver bugfix
- usb gadget uvc bugfix
All of these have been in linux-next with no reported issues"
* tag 'usb-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: chipidea: udc: check request status before setting device address
USB: gadget: Fix double-free bug in raw_gadget driver
xhci-pci: Allow host runtime PM as default for Intel Meteor Lake xHCI
xhci-pci: Allow host runtime PM as default for Intel Raptor Lake xHCI
xhci: turn off port power in shutdown
xhci: Keep interrupt disabled in initialization until host is running.
USB: serial: option: add Quectel RM500K module support
USB: serial: option: add Quectel EM05-G modem
USB: serial: pl2303: add support for more HXN (G) types
usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMIC
usb: gadget: uvc: fix list double add in uvcg_video_pump
dt-bindings: usb: ehci: Increase the number of PHYs
dt-bindings: usb: ohci: Increase the number of PHYs
usb: gadget: Fix non-unique driver names in raw-gadget driver
MAINTAINERS: add include/dt-bindings/usb to USB SUBSYSTEM
USB: serial: option: add Telit LE910Cx 0x1250 composition
Linus Torvalds [Sat, 25 Jun 2022 16:24:59 +0000 (09:24 -0700)]
Merge tag 'loongarch-fixes-5.19-3' of git://git./linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Some bug fixes and a trivial cleanup"
* tag 'loongarch-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Make compute_return_era() return void
LoongArch: Fix wrong fpu version
LoongArch: Fix EENTRY/MERRENTRY setting in setup_tlb_handler()
LoongArch: Fix sleeping in atomic context in setup_tlb_handler()
LoongArch: Fix the _stext symbol address
LoongArch: Fix the !THP build
Linus Torvalds [Sat, 25 Jun 2022 16:19:51 +0000 (09:19 -0700)]
Merge tag 'f2fs-for-5.19-rc4' of git://git./linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
"Some urgent fixes to avoid generating corrupted inodes caused by
compressed and inline_data files.
In addition, avoid a wrong error report which prevents a roll-forward
recovery"
* tag 'f2fs-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: do not count ENOENT for error case
f2fs: fix iostat related lock protection
f2fs: attach inline_data after setting compression
Tiezhu Yang [Sat, 18 Jun 2022 08:39:11 +0000 (16:39 +0800)]
LoongArch: Make compute_return_era() return void
compute_return_era() always returns 0, make it return void,
and then no need to check its return value for its callers.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Tiezhu Yang [Sat, 18 Jun 2022 04:50:31 +0000 (12:50 +0800)]
LoongArch: Fix wrong fpu version
According to the configuration information accessible by the CPUCFG
instruction in LoongArch Reference Manual [1], FP_ver is stored in
bit [5: 3] of CPUCFG2, the current code to get fpu version is wrong,
use CPUCFG2_FPVERS to fix it.
[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html
Fixes:
628c3bb40e9a ("LoongArch: Add boot and setup routines")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Thu, 23 Jun 2022 08:11:54 +0000 (16:11 +0800)]
LoongArch: Fix EENTRY/MERRENTRY setting in setup_tlb_handler()
setup_tlb_handler() is expected to set per-cpu exception handlers, but
it only set the TLBRENTRY successfully because of copy & paste errors,
so fix it.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Thu, 23 Jun 2022 01:55:42 +0000 (09:55 +0800)]
LoongArch: Fix sleeping in atomic context in setup_tlb_handler()
Since setup_tlb_handler() is executed in atomic context, we should use
GFP_ATOMIC instead of GFP_KERNEL to alloc pages. Otherwise we will get
a "sleeping in atomic context" error:
[ 0.013118] BUG: sleeping function called from invalid context at mm/page_alloc.c:5158
[ 0.013126] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
[ 0.013131] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.19-rc3+ #1008
1a223086d14d07967cc427f15d52139422271360
[ 0.013136] Hardware name: Loongson Loongson-3A5000-7A1000-1w-V0.1-CRB/Loongson-LS3A5000-7A1000-1w-EVB-V1.21, BIOS Loongson-UDK2018-V2.0.04082-beta7 04/27
[ 0.013140] Stack :
90000000015fc990 9000000100493c18 9000000000df3370 9000000100490000
[ 0.013151]
9000000100493b50 0000000000000000 9000000100493b58 9000000001417ef0
[ 0.013160]
900000000199e54e 0000000000000040 9000000100493c18 90000000015f7a98
[ 0.013168]
ffffffffffffffff 6de72f8b42179d1e 9000000100403b80 90000000015f7890
[ 0.013176]
0000000000000001 00000000fffff175 9000000000eb9860 9000000001530b4b
[ 0.013184]
9000000000e99e60 0000000000000013 0000000006ecc000 0000000000000001
[ 0.013193]
90000000015f7a98 9000000001417ef0 0000000000000004 0000000000000000
[ 0.013201]
0000000000000cc0 0000000000000000 0000000000000001 90000000015fc990
[ 0.013209]
9000000000217e74 9000000001603b6b 9000000000208640 0000000000000000
[ 0.013217]
00000000000000b0 0000000000000004 0000000000000000 0000000000070000
[ 0.013225] ...
[ 0.013229] Call Trace:
[ 0.013230] [<
9000000000208640>] show_stack+0x4c/0x14c
[ 0.013240] [<
9000000000df3370>] dump_stack_lvl+0x70/0xac
[ 0.013246] [<
9000000000270c8c>] ___might_sleep+0x104/0x124
[ 0.013253] [<
9000000000477e84>] __alloc_pages+0x240/0x464
[ 0.013260] [<
9000000000214214>] setup_tlb_handler+0x104/0x1e8
[ 0.013265] [<
9000000000214324>] tlb_init+0x2c/0x3c
[ 0.013270] [<
9000000000208b74>] per_cpu_trap_init+0xec/0x108
[ 0.013275] [<
9000000000202850>] cpu_probe+0x400/0x8a4
[ 0.013279] [<
900000000020d160>] start_secondary+0x5c/0x3d4
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Sat, 25 Jun 2022 08:55:41 +0000 (16:55 +0800)]
LoongArch: Fix the _stext symbol address
_stext means the start of .text section (see __is_kernel_text()), but we
put its definition in .ref.text by mistake. Fix it by defining it in the
vmlinux.lds.S.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Wed, 22 Jun 2022 13:56:16 +0000 (21:56 +0800)]
LoongArch: Fix the !THP build
Fix the !THP build by making pmd_pfn() available in all configurations.
Because pmd_pfn() is used in mm/page_vma_mapped.c whether or not THP is
configured.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Linus Torvalds [Sat, 25 Jun 2022 00:01:31 +0000 (17:01 -0700)]
Merge tag 'gpio-fixes-for-v5.19-rc4' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- make the irqchip immutable in gpio-realtek-otto
- fix error code propagation in gpio-winbond
- fix device removing in gpio-grgpio
- fix a typo in gpio-mxs which indicates the driver is for a different
model
- documentation fixes
- MAINTAINERS file updates
* tag 'gpio-fixes-for-v5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mxs: Fix header comment
gpio: Fix kernel-doc comments to nested union
gpio: grgpio: Fix device removing
gpio: winbond: Fix error code in winbond_gpio_get()
gpio: realtek-otto: Make the irqchip immutable
docs: driver-api: gpio: Fix filename mismatch
MAINTAINERS: add include/dt-bindings/gpio to GPIO SUBSYSTEM
Linus Torvalds [Fri, 24 Jun 2022 21:04:08 +0000 (14:04 -0700)]
Merge tag 'mtd/fixes-for-5.19-rc4' of git://git./linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel RAynal:
"NAND controller fix:
- gpmi: Fix busy timeout setting (wrong calculation)
NAND chip driver fix:
- Thoshiba: Revert the commit introducing support for a chip that
might have been counterfeit"
* tag 'mtd/fixes-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: gpmi: Fix setting busy timeout setting
Revert "mtd: rawnand: add support for Toshiba TC58NVG0S3HTA00 NAND flash"
Linus Torvalds [Fri, 24 Jun 2022 20:54:16 +0000 (13:54 -0700)]
Merge tag 'spi-fix-v5.19-rc3' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A bunch of driver specific fixes, plus a fix for spi-mem's status
polling for devices that use GPIO chip selects and a DT bindings
examples fix that helps with the validation work"
* tag 'spi-fix-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: rockchip: Unmask IRQ at the final to avoid preemption
spi: dt-bindings: Fix unevaluatedProperties warnings in examples
spi: spi-mem: Fix spi_mem_poll_status()
spi: cadence: Detect transmit FIFO depth
spi: spi-cadence: Fix SPI CS gets toggling sporadically
Linus Torvalds [Fri, 24 Jun 2022 20:51:07 +0000 (13:51 -0700)]
Merge tag 'regulator-fix-v5.19-rc3' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One fix for an incorrect device description for MP5496"
* tag 'regulator-fix-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: qcom_smd: correct MP5496 ranges
Linus Torvalds [Fri, 24 Jun 2022 20:49:13 +0000 (13:49 -0700)]
Merge tag 'regmap-fix-v5.19-rc3' of git://git./linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"Two sets of fixes - one for things that were missed with the support
for custom bulk I/O operations introduced in the last merge window,
and another for some long standing issues with regmap-irq which affect
a fairly small subset of devices"
* tag 'regmap-fix-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: Fix offset/index mismatch in read_sub_irq_data()
regmap-irq: Fix a bug in regmap_irq_enable() for type_in_mask chips
regmap: Wire up regmap_config provided bulk write in missed functions
regmap: Make regmap_noinc_read() return -ENOTSUPP if map->read isn't set
regmap: Re-introduce bulk read support check in regmap_bulk_read()
Linus Torvalds [Fri, 24 Jun 2022 20:41:47 +0000 (13:41 -0700)]
Merge tag 'iommu-fixes-v5.19-rc3' of git://git./linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Add a new IOMMU mailing list to the MAINTAINERS file to prepare for
the a list migration happening on July 5th. The old list needs to
stay in place until the switch happens to guarantee seemless
archiving of list email.
- Fix compatible device-tree string for rcar-gen4 in Renesas IOMMU
driver.
* tag 'iommu-fixes-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
MAINTAINERS: Add new IOMMU development mailing list
iommu/ipmmu-vmsa: Fix compatible for rcar-gen4
Linus Torvalds [Fri, 24 Jun 2022 19:34:13 +0000 (12:34 -0700)]
Merge tag 'riscv-for-linus-5.19-rc4' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
- fix the T-Head memory type errata workaround to avoid behavior
that is unsupported in the LLVM assembler
* tag 'riscv-for-linus-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix ALT_THEAD_PMA's asm parameters
Linus Torvalds [Fri, 24 Jun 2022 19:27:24 +0000 (12:27 -0700)]
Merge tag 's390-5.19-4' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix perf stat accounting for cryptography counters when multiple
events are installed concurrently.
- Prevent installation of unsupported perf events for cryptography
counters.
- Treat perf events cpum_cf/CPU_CYCLES/ and cpu_cf/INSTRUCTIONS/
identical to basic events CPU_CYCLES" and INSTRUCTIONS, since they
address the same hardware.
- Restore kcrash operation which was broken by commit
5d8de293c224
("vmcore: convert copy_oldmem_page() to take an iov_iter").
* tag 's390-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pai: Fix multiple concurrent event installation
s390/pai: Prevent invalid event number for pai_crypto PMU
s390/cpumf: Handle events cycles and instructions identical
s390/crash: make copy_oldmem_page() return number of bytes copied
s390/crash: add missing iterator advance in copy_oldmem_page()
Linus Torvalds [Fri, 24 Jun 2022 19:22:11 +0000 (12:22 -0700)]
Merge tag 'for-linus-5.19a-rc4-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A rare deadlock in Qubes-OS between the i915 driver and Xen grant
unmapping, solved by making the unmapping fully asynchronous
- A bug in the Xen blkfront driver caused by incomplete error handling
- A fix for undefined behavior (shifting a signed int by 31 bits)
- A fix in the Xen drmfront driver avoiding a WARN()
* tag 'for-linus-5.19a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/gntdev: Avoid blocking in unmap_grant_pages()
drm/xen: Add missing VM_DONTEXPAND flag in mmap callback
x86/xen: Remove undefined behavior in setup_features()
xen-blkfront: Handle NULL gendisk
Linus Torvalds [Fri, 24 Jun 2022 19:17:47 +0000 (12:17 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix a regression with pKVM when kmemleak is enabled
- Add Oliver Upton as an official KVM/arm64 reviewer
selftests:
- deal with compiler optimizations around hypervisor exits
x86:
- MAINTAINERS reorganization
- Two SEV fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV: Init target VMCBs in sev_migrate_from
KVM: x86/svm: add __GFP_ACCOUNT to __sev_dbg_{en,de}crypt_user()
MAINTAINERS: Reorganize KVM/x86 maintainership
selftests: KVM: Handle compiler optimizations in ucall
KVM: arm64: Add Oliver as a reviewer
KVM: arm64: Prevent kmemleak from accessing pKVM memory
tools/kvm_stat: fix display of error when multiple processes are found
Linus Torvalds [Fri, 24 Jun 2022 18:43:49 +0000 (11:43 -0700)]
Merge tag 'drm-fixes-2022-06-24' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Fixes for this week, bit larger than normal, but I think the last
couple have been quieter, and it's only rc4.
There are a lot of small msm fixes, and a slightly larger set of vc4
fixes. The vc4 fixes clean up a lot of crashes around the rPI4
hardware differences from earlier ones, and problems in the page flip
and modeset code which assumed earlier hw, so I thought it would be
okay to keep them in.
Otherwise, it's a few amdgpu, i915, sun4i and a panel quirk.
amdgpu:
- Adjust GTT size logic
- eDP fix for RMB
- DCN 3.15 fix
- DP training fix
- Color encoding fix for DCN2+
sun4i:
- multiple suspend fixes
vc4:
- rework driver split for rpi4, fixes mulitple crashers.
panel:
- quirk for Aya Neo Next
i915:
- Revert low voltage SKU check removal to fix display issues
- Apply PLL DCO fraction workaround for ADL-S
- Don't show engine classes not present in client fdinfo
msm:
- Workaround for parade DSI bridge power sequencing
- Fix for multi-planar YUV format offsets
- Limiting WB modes to max sspp linewidth
- Fixing the supported rotations to add 180 back for IGT
- Fix to handle pm_runtime_get_sync() errors to avoid unclocked
access in the bind() path for dpu driver
- Fix the irq_free() without request issue which was a being hit
frequently in CI.
- Fix to add minimum ICC vote in the msm_mdss pm_resume path to
address bootup splats
- Fix to avoid dereferencing without checking in WB encoder
- Fix to avoid crash during suspend in DP driver by ensuring
interrupt mask bits are updated
- Remove unused code from dpu_encoder_virt_atomic_check()
- Fix to remove redundant init of dsc variable
- Fix to ensure mmap offset is initialized to avoid memory corruption
from unpin/evict
- Fix double runpm disable in probe-defer path
- VMA fenced-unpin fixes
- Fix for WB max-width
- Fix for rare dp resolution change issue"
* tag 'drm-fixes-2022-06-24' of git://anongit.freedesktop.org/drm/drm: (41 commits)
amd/display/dc: Fix COLOR_ENCODING and COLOR_RANGE doing nothing for DCN20+
drm/amd/display: Fix typo in override_lane_settings
drm/amd/display: Fix DC warning at driver load
drm/amd: Revert "drm/amd/display: keep eDP Vdd on when eDP stream is already enabled"
drm/amdgpu: Adjust logic around GTT size (v3)
drm/sun4i: Return if frontend is not present
drm/vc4: fix error code in vc4_check_tex_size()
drm/sun4i: Add DMA mask and segment size
drm/vc4: hdmi: Fixed possible integer overflow
drm/i915/display: Re-add check for low voltage sku for max dp source rate
drm/i915/fdinfo: Don't show engine classes not present
drm/i915: Implement w/a
22010492432 for adl-s
drm: panel-orientation-quirks: Add quirk for Aya Neo Next
drm/msm/dp: force link training for display resolution change
drm/msm/dpu: limit wb modes based on max_mixer_width
drm/msm/dp: check core_initialized before disable interrupts at dp_display_unbind()
drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intf
drm/msm: Don't overwrite hw fence in hw_init
drm/msm: Drop update_fences()
drm/vc4: Warn if some v3d code is run on BCM2711
...
Paulo Alcantara [Fri, 24 Jun 2022 18:01:43 +0000 (15:01 -0300)]
cifs: update cifs_ses::ip_addr after failover
cifs_ses::ip_addr wasn't being updated in cifs_session_setup() when
reconnecting SMB sessions thus returning wrong value in
/proc/fs/cifs/DebugData.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Fri, 24 Jun 2022 18:16:27 +0000 (11:16 -0700)]
Merge tag 'for-5.19/dm-fixes-4' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM era to commit metadata during suspend using drain_workqueue
instead of flush_workqueue.
- Fix DM core's dm_io_complete to not return early if io error is
BLK_STS_AGAIN but bio polling is not in use.
- Fix DM core's dm_io_complete BLK_STS_DM_REQUEUE handling when dm_io
represents a split bio.
- Fix recent DM mirror log regression by clearing bits up to
BITS_PER_LONG boundary.
* tag 'for-5.19/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm mirror log: clear log bits up to BITS_PER_LONG boundary
dm: fix BLK_STS_DM_REQUEUE handling when dm_io represents split bio
dm: do not return early from dm_io_complete if BLK_STS_AGAIN without polling
dm era: commit metadata in postsuspend after worker stops
Linus Torvalds [Fri, 24 Jun 2022 18:12:34 +0000 (11:12 -0700)]
Merge tag 'ata-5.19-rc4' of git://git./linux/kernel/git/dlemoal/libata
Pull ATA fix from Damien Le Moal:
- a single patch to fix tracing of command completion (Edward)
* tag 'ata-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata: add qc->flags in ata_qc_complete_template tracepoint
Linus Torvalds [Fri, 24 Jun 2022 18:07:54 +0000 (11:07 -0700)]
Merge tag 'block-5.19-2022-06-24' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Series fixing issues with sysfs locking and name reuse (Christoph)
- NVMe pull request via Christoph:
- Fix the mixed up CRIMS/CRWMS constants (Joel Granados)
- Add another broken identifier quirk (Leo Savernik)
- Fix up a quirk because Samsung reuses PCI IDs over different
products (Christoph Hellwig)
- Remove old WARN_ON() that doesn't apply anymore (Li)
- Fix for using a stale cached request value for rq-qos throttling
mechanisms that may schedule(), like iocost (me)
- Remove unused parameter to blk_independent_access_range() (Damien)
* tag 'block-5.19-2022-06-24' of git://git.kernel.dk/linux-block:
block: remove WARN_ON() from bd_link_disk_holder
nvme: move the Samsung X5 quirk entry to the core quirks
nvme: fix the CRIMS and CRWMS definitions to match the spec
nvme: add a bogus subsystem NQN quirk for Micron MTFDKBA2T0TFH
block: pop cached rq before potentially blocking rq_qos_throttle()
block: remove queue from struct blk_independent_access_range
block: freeze the queue earlier in del_gendisk
block: remove per-disk debugfs files in blk_unregister_queue
block: serialize all debugfs operations using q->debugfs_mutex
block: disable the elevator int del_gendisk
Linus Torvalds [Fri, 24 Jun 2022 18:02:26 +0000 (11:02 -0700)]
Merge tag 'io_uring-5.19-2022-06-24' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few fixes that should go into the 5.19 release. All are fixing
issues that either happened in this release, or going to stable.
In detail:
- A small series of fixlets for the poll handling, all destined for
stable (Pavel)
- Fix a merge error from myself that caused a potential -EINVAL for
the recv/recvmsg flag setting (me)
- Fix a kbuf recycling issue for partial IO (me)
- Use the original request for the inflight tracking (me)
- Fix an issue introduced this merge window with trace points using a
custom decoder function, which won't work for perf (Dylan)"
* tag 'io_uring-5.19-2022-06-24' of git://git.kernel.dk/linux-block:
io_uring: use original request task for inflight tracking
io_uring: move io_uring_get_opcode out of TP_printk
io_uring: fix double poll leak on repolling
io_uring: fix wrong arm_poll error handling
io_uring: fail links when poll fails
io_uring: fix req->apoll_events
io_uring: fix merge error in checking send/recv addr2 flags
io_uring: mark reissue requests with REQ_F_PARTIAL_IO
Linus Torvalds [Fri, 24 Jun 2022 17:54:07 +0000 (10:54 -0700)]
Merge tag 'printk-for-5.19-rc4' of git://git./linux/kernel/git/printk/linux
Pull printk kernel thread revert from Petr Mladek:
"Revert printk console kthreads.
The testing of 5.19 release candidates revealed issues that did not
happen when all consoles were serialized using the console semaphore.
More time is needed to check expectations of the existing console
drivers and be confident that they can be safely used in parallel"
* tag 'printk-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
Revert "printk: add functions to prefer direct printing"
Revert "printk: add kthread console printers"
Revert "printk: extend console_lock for per-console locking"
Revert "printk: remove @console_locked"
Revert "printk: Block console kthreads when direct printing will be required"
Revert "printk: Wait for the global console lock when the system is going down"
Jae Hyun Yoo [Fri, 24 Jun 2022 07:05:11 +0000 (16:35 +0930)]
ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom
Nuvia has been acquired by Qualcomm and the vendor name 'nuvia' will
not be used anymore so rename aspeed-bmc-nuvia-dc-scm.dts to
aspeed-bmc-qcom-dc-scm-v1.dts and change 'nuvia' to 'qcom' as its vendor
name in the file.
Fixes:
7b46aa7c008d ("ARM: dts: aspeed: Add Nuvia DC-SCM BMC")
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220523175640.60155-1-quic_jaehyoo@quicinc.com
Link: https://lore.kernel.org/r/20220624070511.4070659-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>