powerpc/hv-gpci: Fix hv_gpci event list

[ Upstream commit 03f7c1d2a49acd30e38789cd809d3300721e9b0e ]

Based on getPerfCountInfo v1.018 documentation, some of the
hv_gpci events were deprecated for platform firmware that
supports counter_info_version 0x8 or above.

Fix the hv_gpci event list by adding a new attribute group
called "hv_gpci_event_attrs_v6" and a "ENABLE_EVENTS_COUNTERINFO_V6"
macro to enable these events for platform firmware
that supports counter_info_version 0x6 or below. And assigning
the hv_gpci event list based on output counter info version
of underlying plaform.

Fixes: 97bf2640184f ("powerpc/perf/hv-gpci: add the remaining gpci requests")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221130174513.87501-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/83xx/mpc832x_rdb: call platform_device_put() in error case in of_fsl_spi_probe()

[ Upstream commit 4d0eea415216fe3791da2f65eb41399e70c7bedf ]

If platform_device_add() is not called or failed, it can not call
platform_device_del() to clean up memory, it should call
platform_device_put() in error case.

Fixes: 26f6cb999366 ("[POWERPC] fsl_soc: add support for fsl_spi")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221029111626.429971-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/perf: callchain validate kernel stack pointer bounds

[ Upstream commit 32c5209214bd8d4f8c4e9d9b630ef4c671f58e79 ]

The interrupt frame detection and loads from the hypothetical pt_regs
are not bounds-checked. The next-frame validation only bounds-checks
STACK_FRAME_OVERHEAD, which does not include the pt_regs. Add another
test for this.

The user could set r1 to be equal to the address matching the first
interrupt frame - STACK_INT_FRAME_SIZE, which is in the previous page
due to the kernel redzone, and induce the kernel to load the marker from
there. Possibly this could cause a crash at least. If the user could
induce the previous page to contain a valid marker, then it might be
able to direct perf to read specific memory addresses in a way that
could be transmitted back to the user in the perf data.

Fixes: 20002ded4d93 ("perf_counter: powerpc: Add callchain support")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-4-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/xive: add missing iounmap() in error path in xive_spapr_populate_irq_data()

[ Upstream commit 8b49670f3bb3f10cd4d5a6dca17f5a31b173ecdc ]

If remapping 'data->trig_page' fails, the 'data->eoi_mmio' need be unmapped
before returning from xive_spapr_populate_irq_data().

Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221017032333.1852406-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/xmon: Fix -Wswitch-unreachable warning in bpt_cmds

[ Upstream commit 1c4a4a4c8410be4a231a58b23e7a30923ff954ac ]

When building with automatic stack variable initialization, GCC 12
complains about variables defined outside of switch case statements.
Move the variable into the case that uses it, which silences the warning:

arch/powerpc/xmon/xmon.c: In function ‘bpt_cmds’:
arch/powerpc/xmon/xmon.c:1529:13: warning: statement will never be executed [-Wswitch-unreachable]
 1529 |         int mode;
      |             ^~~~

Fixes: 09b6c1129f89 ("powerpc/xmon: Fix compile error with PPC_8xx=y")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YySE6FHiOcbWWR+9@work
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl: Fix refcount leak in cxl_calc_capp_routing

[ Upstream commit 1d09697ff22908ae487fc8c4fbde1811732be523 ]

of_get_next_parent() returns a node pointer with refcount incremented,
we should use of_node_put() on it when not need anymore.
This function only calls of_node_put() in normal path,
missing it in the error path.
Add missing of_node_put() to avoid refcount leak.

Fixes: f24be42aab37 ("cxl: Add psl9 specific code")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220605060038.62217-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/52xx: Fix a resource leak in an error handling path

[ Upstream commit 5836947613ef33d311b4eff6a32d019580a214f5 ]

The error handling path of mpc52xx_lpbfifo_probe() has a request_irq()
that is not balanced by a corresponding free_irq().

Add the missing call, as already done in the remove function.

Fixes: 3c9059d79f5e ("powerpc/5200: add LocalPlus bus FIFO device driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/dec1496d46ccd5311d0f6e9f9ca4238be11bf6a6.1643440531.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

macintosh/macio-adb: check the return value of ioremap()

[ Upstream commit dbaa3105736d4d73063ea0a3b01cd7fafce924e6 ]

The function ioremap() in macio_init() can fail, so its return value
should be checked.

Fixes: 36874579dbf4c ("[PATCH] powerpc: macio-adb build fix")
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: Xie Shaowen <studentxswpy@163.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220802074148.3213659-1-studentxswpy@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

macintosh: fix possible memory leak in macio_add_one_device()

[ Upstream commit 5ca86eae55a2f006e6c1edd2029b2cacb6979515 ]

Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically. It
needs to be freed when of_device_register() fails. Call put_device() to
give up the reference that's taken in device_initialize(), so that it
can be freed in kobject_cleanup() when the refcount hits 0.

macio device is freed in macio_release_dev(), so the kfree() can be
removed.

Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221104032551.1075335-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()

[ Upstream commit 73f5fc5f884ad0c5f7d57f66303af64f9f002526 ]

The fsl_pamu_probe() returns directly when create_csd() failed, leaving
irq and memories unreleased.
Fix by jumping to error if create_csd() returns error.

Fixes: 695093e38c3e ("iommu/fsl: Freescale PAMU driver and iommu implementation.")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221121082022.19091-1-yuancan@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/amd: Fix pci device refcount leak in ppr_notifier()

[ Upstream commit 6cf0981c2233f97d56938d9d61845383d6eb227c ]

As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). So call it before returning from ppr_notifier()
to avoid refcount leak.

Fixes: daae2d25a477 ("iommu/amd: Don't copy GCR3 table root pointer")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221118093604.216371-1-yangyingliang@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: pcf85063: Fix reading alarm

[ Upstream commit a6ceee26fd5ed9b5bd37322b1ca88e4548cee4a3 ]

If the alarms are disabled the topmost bit (AEN_*) is set in the alarm
registers. This is also interpreted in BCD number leading to this warning:
rtc rtc0: invalid alarm value: 2022-09-21T80:80:80

Fix this by masking alarm enabling and reserved bits.

Fixes: 05cb3a56ee8c ("rtc: pcf85063: add alarm support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220921074141.3903104-1-alexander.stein@ew.tq-group.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: snvs: Allow a time difference on clock register read

[ Upstream commit 0462681e207ccc44778a77b3297af728b1cf5b9f ]

On an iMX6ULL the following message appears when a wakealarm is set:

echo 0 > /sys/class/rtc/rtc1/wakealarm
rtc rtc1: Timeout trying to get valid LPSRT Counter read

This does not always happen but is reproducible quite often (7 out of 10
times). The problem appears because the iMX6ULL is not able to read the
registers within one 32kHz clock cycle which is the base clock of the
RTC. Therefore, this patch allows a difference of up to 320 cycles
(10ms). 10ms was chosen to be big enough even on systems with less cpu
power (e.g. iMX6ULL). According to the reference manual a difference is
fine:
- If the two consecutive reads are similar, the value is correct.
The values have to be similar, not equal.

Fixes: cd7f3a249dbe ("rtc: snvs: Add timeouts to avoid kernel lockups")
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco@dolcini.it>
Link: https://lore.kernel.org/r/20221106115915.7930-1-francesco@dolcini.it
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: cmos: Disable ACPI RTC event on removal

[ Upstream commit 83ebb7b3036d151ee39a4a752018665648fc3bd4 ]

Make cmos_do_remove() drop the ACPI RTC fixed event handler so as to
prevent it from operating on stale data in case the event triggers
after driver removal.

Fixes: 311ee9c151ad ("rtc: cmos: allow using ACPI for RTC alarm instead of HPET")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/2224609.iZASKD2KPV@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: cmos: Rename ACPI-related functions

[ Upstream commit d13e9ad9f5146f066a5c5a1cc993d09e4fb21ead ]

The names of rtc_wake_setup() and cmos_wake_setup() don't indicate
that these functions are ACPI-related, which is the case, and the
former doesn't really reflect the role of the function.

Rename them to acpi_rtc_event_setup() and acpi_cmos_wake_setup(),
respectively, to address this shortcoming.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/3225614.44csPzL39Z@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: cmos: Eliminate forward declarations of some functions

[ Upstream commit dca4d3b71c8a09a16951add656711fbd6f5bfbb0 ]

Reorder the ACPI-related code before cmos_do_probe() so as to eliminate
excessive forward declarations of some functions.

While at it, for consistency, add the inline modifier to the
definitions of empty stub static funtions and remove it from the
corresponding definitions of functions with non-empty bodies.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/13157911.uLZWGnKmhe@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: cmos: Call rtc_wake_setup() from cmos_do_probe()

[ Upstream commit 375bbba09692fe4c5218eddee8e312dd733fa846 ]

To reduce code duplication, move the invocation of rtc_wake_setup()
into cmos_do_probe() and simplify the callers of the latter.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/2143522.irdbgypaU6@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: cmos: Call cmos_wake_setup() from cmos_do_probe()

[ Upstream commit 508ccdfb86b21da37ad091003a4d4567709d5dfb ]

Notice that cmos_wake_setup() is the only user of acpi_rtc_info and it
can operate on the cmos_rtc variable directly, so it need not set the
platform_data pointer before cmos_do_probe() is called.  Instead, it
can be called by cmos_do_probe() in the case when the platform_data
pointer is not set to implement the default behavior (which is to use
the FADT information as long as ACPI support is enabled).

Modify the code accordingly.

While at it, drop a comment that doesn't really match the code it is
supposed to be describing.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/4803444.31r3eYUQgx@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: cmos: fix build on non-ACPI platforms

[ Upstream commit db4e955ae333567dea02822624106c0b96a2f84f ]

Now that rtc_wake_setup is called outside of cmos_wake_setup, it also need
to be defined on non-ACPI platforms.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20221018203512.2532407-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: cmos: Fix wake alarm breakage

[ Upstream commit 0782b66ed2fbb035dda76111df0954515e417b24 ]

Commit 4919d3eb2ec0 ("rtc: cmos: Fix event handler registration
ordering issue") overlooked the fact that cmos_do_probe() depended
on the preparations carried out by cmos_wake_setup() and the wake
alarm stopped working after the ordering of them had been changed.

Address this by partially reverting commit 4919d3eb2ec0 so that
cmos_wake_setup() is called before cmos_do_probe() again and moving
the rtc_wake_setup() invocation from cmos_wake_setup() directly to the
callers of cmos_do_probe() where it will happen after a successful
completion of the latter.

Fixes: 4919d3eb2ec0 ("rtc: cmos: Fix event handler registration ordering issue")
Reported-by: Zhang Rui <rui.zhang@intel.com>
Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/5887691.lOV4Wx5bFT@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: cmos: Fix event handler registration ordering issue

[ Upstream commit 4919d3eb2ec0ee364f7e3cf2d99646c1b224fae8 ]

Because acpi_install_fixed_event_handler() enables the event
automatically on success, it is incorrect to call it before the
handler routine passed to it is ready to handle events.

Unfortunately, the rtc-cmos driver does exactly the incorrect thing
by calling cmos_wake_setup(), which passes rtc_handler() to
acpi_install_fixed_event_handler(), before cmos_do_probe(), because
rtc_handler() uses dev_get_drvdata() to get to the cmos object
pointer and the driver data pointer is only populated in
cmos_do_probe().

This leads to a NULL pointer dereference in rtc_handler() on boot
if the RTC fixed event happens to be active at the init time.

To address this issue, change the initialization ordering of the
driver so that cmos_wake_setup() is always called after a successful
cmos_do_probe() call.

While at it, change cmos_pnp_probe() to call cmos_do_probe() after
the initial if () statement used for computing the IRQ argument to
be passed to cmos_do_probe() which is cleaner than calling it in
each branch of that if () (local variable "irq" can be of type int,
because it is passed to that function as an argument of type int).

Note that commit 6492fed7d8c9 ("rtc: rtc-cmos: Do not check
ACPI_FADT_LOW_POWER_S0") caused this issue to affect a larger number
of systems, because previously it only affected systems with
ACPI_FADT_LOW_POWER_S0 set, but it is present regardless of that
commit.

Fixes: 6492fed7d8c9 ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0")
Fixes: a474aaedac99 ("rtc-cmos: move wake setup from ACPI glue into RTC driver")
Link: https://lore.kernel.org/linux-acpi/20221010141630.zfzi7mk7zvnmclzy@techsingularity.net/
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/5629262.DvuYhMxLoT@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0

[ Upstream commit 6492fed7d8c95f53b0b804ef541324d924d95d41 ]

The ACPI_FADT_LOW_POWER_S0 flag merely means that it is better to
use low-power S0 idle on the given platform than S3 (provided that
the latter is supported) and it doesn't preclude using either of
them (which of them will be used depends on the choices made by user
space).

For this reason, there is no benefit from checking that flag in
use_acpi_alarm_quirks().

First off, it cannot be a bug to do S3 with use_acpi_alarm set,
because S3 can be used on systems with ACPI_FADT_LOW_POWER_S0 and it
must work if really supported, so the ACPI_FADT_LOW_POWER_S0 check is
not needed to protect the S3-capable systems from failing.

Second, suspend-to-idle can be carried out on a system with
ACPI_FADT_LOW_POWER_S0 unset and it is expected to work, so if setting
use_acpi_alarm is needed to handle that case correctly, it should be
set regardless of the ACPI_FADT_LOW_POWER_S0 value.

Accordingly, drop the ACPI_FADT_LOW_POWER_S0 check from
use_acpi_alarm_quirks().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/12054246.O9o76ZdvQC@kreacher
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: Fix crc_val field for completion record

[ Upstream commit dc901d98b1fe6e52ab81cd3e0879379168e06daa ]

The crc_val in the completion record should be 64 bits and not 32 bits.

Fixes: 4ac823e9cd85 ("dmaengine: idxd: fix delta_rec and crc size field for completion record")
Reported-by: Nirav N Shah <nirav.n.shah@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20221111012715.2031481-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/ntfs3: Fix slab-out-of-bounds read in ntfs_trim_fs

[ Upstream commit 557d19675a470bb0a98beccec38c5dc3735c20fa ]

Syzbot reports an out of bound access in ntfs_trim_fs.
The cause of this is using a loop termination condition that compares
window index (iw) with wnd->nbits instead of wnd->nwnd, due to which the
index used for wnd->free_bits exceeds the size of the array allocated.

Fix the loop condition.

Fixes: 3f3b442b5ad2 ("fs/ntfs3: Add bitmap")
Link: https://syzkaller.appspot.com/bug?extid=b892240eac461e488d51
Reported-by: syzbot+b892240eac461e488d51@syzkaller.appspotmail.com
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: tegra: Improve required rate calculation

[ Upstream commit f271946117dde2ca8741b8138b347b2d68e6ad56 ]

For the case where dev_pm_opp_set_rate() is called to set the PWM clock
rate, the requested rate is calculated as ...

 required_clk_rate = (NSEC_PER_SEC / period_ns) << PWM_DUTY_WIDTH;

The above calculation may lead to rounding errors because the
NSEC_PER_SEC is divided by 'period_ns' before applying the
PWM_DUTY_WIDTH multiplication factor. For example, if the period is
45334ns, the above calculation yields a rate of 5646848Hz instead of
5646976Hz. Fix this by applying the multiplication factor before
dividing and using the DIV_ROUND_UP macro which yields the expected
result of 5646976Hz.

Fixes: 1d7796bdb63a ("pwm: tegra: Support dynamic clock frequency configuration")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

include/uapi/linux/swab: Fix potentially missing __always_inline

[ Upstream commit defbab270d45e32b068e7e73c3567232d745c60f ]

Commit bc27fb68aaad ("include/uapi/linux/byteorder, swab: force inlining
of some byteswap operations") added __always_inline to swab functions
and commit 283d75737837 ("uapi/linux/stddef.h: Provide __always_inline to
userspace headers") added a definition of __always_inline for use in
exported headers when the kernel's compiler.h is not available.

However, since swab.h does not include stddef.h, if the header soup does
not indirectly include it, the definition of __always_inline is missing,
resulting in a compilation failure, which was observed compiling the
perf tool using exported headers containing this commit:

In file included from /usr/include/linux/byteorder/little_endian.h:12:0,
                 from /usr/include/asm/byteorder.h:14,
                 from tools/include/uapi/linux/perf_event.h:20,
                 from perf.h:8,
                 from builtin-bench.c:18:
/usr/include/linux/swab.h:160:8: error: unknown type name `__always_inline'
 static __always_inline __u16 __swab16p(const __u16 *p)

Fix this by replacing the inclusion of linux/compiler.h with
linux/stddef.h to ensure that we pick up that definition if required,
without relying on it's indirect inclusion. compiler.h is then included
indirectly, via stddef.h.

Fixes: 283d75737837 ("uapi/linux/stddef.h: Provide __always_inline to userspace headers")
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Petr Vaněk <arkamar@atlas.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: usb: s2 WoL wakeup_count not incremented for USB->Eth devices

[ Upstream commit f7fc5b7090372fc4dd7798c874635ca41b8ba733 ]

The PHY's "wakeup_count" is not incrementing when waking from
WoL. The wakeup count can be found in sysfs at:
/sys/bus/platform/devices/rdb/*.usb-phy/power/wakeup_count.
The problem is that the system wakup event handler was being passed
the wrong "device" by the PHY driver.

Fixes: f1c0db40a3ad ("phy: usb: Add "wake on" functionality")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/1665005418-15807-3-git-send-email-justinpopo6@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/rockchip: fix permission bits in page table entries v2

[ Upstream commit 7eb99841f340b80be0d0973b0deb592d75fb8928 ]

As pointed out in the corresponding downstream fix [0], the permission bits
of the page table entries are compatible between v1 and v2 of the IOMMU.
This is in contrast to the current mainline code that incorrectly assumes
that the read and write permission bits are switched. Fix the permission
bits by reusing the v1 bit defines.

[0] https://github.com/rockchip-linux/kernel/commit/e3bc123a2260145e34b57454da3db0edd117eb8e

Fixes: c55356c534aa ("iommu: rockchip: Add support for iommu v2")
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20221102063553.2464161-1-michael.riesch@wolfvision.net
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/sun50i: Fix flush size

[ Upstream commit 67a8a67f9eceb72e4c73d1d09ed9ab04f4b8e12d ]

Function sun50i_table_flush() takes number of entries as an argument,
not number of bytes. Fix that mistake in sun50i_dte_get_page_table().

Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-5-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/sun50i: Fix R/W permission check

[ Upstream commit eac0104dc69be50bed86926d6f32e82b44f8c921 ]

Because driver has enum type permissions and iommu subsystem has bitmap
type, we have to be careful how check for combined read and write
permissions is done. In such case, we have to mask both permissions and
check that both are set at the same time.

Current code just masks both flags but doesn't check that both are set.
In short, it always sets R/W permission, regardles if requested
permissions were RO, WO or RW. Fix that.

Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-4-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/sun50i: Consider all fault sources for reset

[ Upstream commit cef20703e2b2276aaa402ec5a65ec9a09963b83e ]

We have to reset masters for all faults - permissions, L1 fault or L2
fault. Currently it's done only for permissions. If other type of fault
happens, master is in locked up state. Fix that by really considering
all fault sources.

Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-3-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/sun50i: Fix reset release

[ Upstream commit 9ad0c1252e84dbc664f0462707182245ed603237 ]

Reset signal is asserted by writing 0 to the corresponding locations of
masters we want to reset. So in order to deassert all reset signals, we
should write 1's to all locations.

Current code writes 1's to locations of masters which were just reset
which is good. However, at the same time it also writes 0's to other
locations and thus asserts reset signals of remaining masters. Fix code
by writing all 1's when we want to deassert all reset signals.

This bug was discovered when working with Cedrus (video decoder). When
it faulted, display went blank due to reset signal assertion.

Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-2-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/ntfs3: Harden against integer overflows

[ Upstream commit e001e60869390686809663c02bceb1d3922548fb ]

Smatch complains that the "add_bytes" is not to be trusted.  Use
size_add() to prevent an integer overflow.

Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

overflow: Implement size_t saturating arithmetic helpers

[ Upstream commit e1be43d9b5d0d1310dbd90185a8e5c7145dde40f ]

In order to perform more open-coded replacements of common allocation
size arithmetic, the kernel needs saturating (SIZE_MAX) helpers for
multiplication, addition, and subtraction. For example, it is common in
allocators, especially on realloc, to add to an existing size:

    p = krealloc(map->patch,
                 sizeof(struct reg_sequence) * (map->patch_regs + num_regs),
                 GFP_KERNEL);

There is no existing saturating replacement for this calculation, and
just leaving the addition open coded inside array_size() could
potentially overflow as well. For example, an overflow in an expression
for a size_t argument might wrap to zero:

    array_size(anything, something_at_size_max + 1) == 0

Introduce size_mul(), size_add(), and size_sub() helpers that
implicitly promote arguments to size_t and saturated calculations for
use in allocations. With these helpers it is also possible to redefine
array_size(), array3_size(), flex_array_size(), and struct_size() in
terms of the new helpers.

As with the check_*_overflow() helpers, the new helpers use __must_check,
though what is really desired is a way to make sure that assignment is
only to a size_t lvalue. Without this, it's still possible to introduce
overflow/underflow via type conversion (i.e. from size_t to int).
Enforcing this will currently need to be left to static analysis or
future use of -Wconversion.

Additionally update the overflow unit tests to force runtime evaluation
for the pathological cases.

Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Len Baker <len.baker@gmx.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Stable-dep-of: e001e6086939 ("fs/ntfs3: Harden against integer overflows")
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/ntfs3: Avoid UBSAN error on true_sectors_per_clst()

[ Upstream commit caad9dd8792a2622737b7273cb34835fd9536cd2 ]

syzbot reported UBSAN error as below:

[   76.901829][ T6677] ================================================================================
[   76.903908][ T6677] UBSAN: shift-out-of-bounds in fs/ntfs3/super.c:675:13
[   76.905363][ T6677] shift exponent -247 is negative

This patch avoid this error.

Link: https://syzkaller.appspot.com/bug?id=b0299c09a14aababf0f1c862dd4ebc8ab9eb0179
Fixes: a3b774342fa7 (fs/ntfs3: validate BOOT sectors_per_clusters)
Cc: Author: Randy Dunlap <rdunlap@infradead.org>
Reported-by: syzbot+35b87c668935bb55e666@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Fix pointer cast warning

[ Upstream commit 5244ca88671a1981ceec09c5c8809f003e6a62aa ]

The previous build fix left a remaining issue in configurations with
64-bit dma_addr_t on 32-bit architectures:

drivers/infiniband/sw/siw/siw_qp_tx.c: In function 'siw_get_pblpage':
drivers/infiniband/sw/siw/siw_qp_tx.c:32:37: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
   32 |                 return virt_to_page((void *)paddr);
      |                                     ^

Use the same double cast here that the driver uses elsewhere to convert
between dma_addr_t and void*.

Fixes: 0d1b756acf60 ("RDMA/siw: Pass a pointer to virt_to_page()")
Link: https://lore.kernel.org/r/20221215170347.2612403-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf stat: Do not delay the workload with --delay

[ Upstream commit c587e77e100fa40eb6af10e00497c67acf493f33 ]

The -D/--delay option is to delay the measure after the program starts.
But the current code goes to sleep before starting the program so the
program is delayed too.  This is not the intention, let's fix it.

Before:

  $ time sudo ./perf stat -a -e cycles -D 3000 sleep 4
  Events disabled
  Events enabled

   Performance counter stats for 'system wide':

       4,326,949,337      cycles

         4.007494118 seconds time elapsed

  real 0m7.474s
  user 0m0.356s
  sys 0m0.120s

It ran the workload for 4 seconds and gave the 3 second delay.  So it
should skip the first 3 second and measure the last 1 second only.  But
as you can see, it delays 3 seconds and ran the workload after that for
4 seconds.  So the total time (real) was 7 seconds.

After:

  $ time sudo ./perf stat -a -e cycles -D 3000 sleep 4
  Events disabled
  Events enabled

   Performance counter stats for 'system wide':

       1,063,551,013      cycles

         1.002769510 seconds time elapsed

  real 0m4.484s
  user 0m0.385s
  sys 0m0.086s

The bug was introduced when it changed enablement of system-wide events
with a command line workload.  But it should've considered the initial
delay case.  The code was reworked since then (in bb8bc52e7578) so I'm
afraid it won't be applied cleanly.

Fixes: d0a0a511493d2695 ("perf stat: Fix forked applications enablement of counters")
Reported-by: Kevin Nomura <nomurak@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: https://lore.kernel.org/r/20221212230820.901382-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf stat: Refactor __run_perf_stat() common code

[ Upstream commit bb8bc52e75785af94b9ba079277547d50d018a52 ]

This extracts common code from the branches of the forks if-then-else.

enable_counters(), which was at the beginning of both branches of the
conditional, is now unconditional; evlist__start_workload() is extracted
to a different if, which enables making the common clocking code
unconditional.

Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Adrián Herrera Arcila <adrian.herrera@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20220729161244.10522-1-adrian.herrera@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: c587e77e100f ("perf stat: Do not delay the workload with --delay")
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: fix null pointer dereferencing in power_supply_get_battery_info

[ Upstream commit 104bb8a663451404a26331263ce5b96c34504049 ]

when kmalloc() fail to allocate memory in kasprintf(), propname
will be NULL, strcmp() called by of_get_property() will cause
null pointer dereference.

So return ENOMEM if kasprintf() return NULL pointer.

Fixes: 3afb50d7125b ("power: supply: core: Add some helpers to use the battery OCV capacity table")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: ab8500: Fix error handling in ab8500_charger_init()

[ Upstream commit c4d33381b134da188ccd1084aef21e2b8c3c422e ]

The ab8500_charger_init() returns the platform_driver_register() directly
without checking its return value, if platform_driver_register() failed,
all ab8500_charger_component_drivers are not unregistered.

Fix by unregister ab8500_charger_component_drivers when
platform_driver_register() failed.

Fixes: 1c1f13a006ed ("power: supply: ab8500: Move to componentized binding")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HSI: omap_ssi_core: Fix error handling in ssi_init()

[ Upstream commit 3ffa9f713c39a213a08d9ff13ab983a8aa5d8b5d ]

The ssi_init() returns the platform_driver_register() directly without
checking its return value, if platform_driver_register() failed, the
ssi_pdriver is not unregistered.
Fix by unregister ssi_pdriver when the last platform_driver_register()
failed.

Fixes: 0fae198988b8 ("HSI: omap_ssi: built omap_ssi and omap_ssi_port into one module")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: z2_battery: Fix possible memleak in z2_batt_probe()

[ Upstream commit 955bee204f3dd307642c101b75e370662987e735 ]

If devm_gpiod_get_optional() returns error, the charger should be
freed before z2_batt_probe returns according to the context. We
fix it by just gotoing to 'err' branch.

Fixes: a3b4388ea19b ("power: supply: z2_battery: Convert to GPIO descriptors")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf symbol: correction while adjusting symbol

[ Upstream commit 6f520ce17920b3cdfbd2479b3ccf27f9706219d0 ]

perf doesn't provide proper symbol information for specially crafted
.debug files.

Sometimes .debug file may not have similar program header as runtime
ELF file. For example if we generate .debug file using objcopy
--only-keep-debug resulting file will not contain .text, .data and
other runtime sections. That means corresponding program headers will
have zero FileSiz and modified Offset.

Example: program header of text section of libxxx.so:

Type           Offset             VirtAddr           PhysAddr
               FileSiz            MemSiz              Flags  Align
LOAD        0x00000000003d3000 0x00000000003d3000 0x00000000003d3000
            0x000000000055ae80 0x000000000055ae80  R E    0x1000

Same program header after executing:
objcopy --only-keep-debug libxxx.so libxxx.so.debug

LOAD        0x0000000000001000 0x00000000003d3000 0x00000000003d3000
            0x0000000000000000 0x000000000055ae80  R E    0x1000

Offset and FileSiz have been changed.

Following formula will not provide correct value, if program header
taken from .debug file (syms_ss):

    sym.st_value -= phdr.p_vaddr - phdr.p_offset;

Correct program header information is located inside runtime ELF
file (runtime_ss).

Fixes: 2d86612aacb7805f ("perf symbol: Correct address for bss symbols")
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Makhalov <amakhalov@vmware.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsab@vmware.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Vasavi Sirnapalli <vsirnapalli@vmware.com>
Link: http://lore.kernel.org/lkml/1669198696-50547-1-git-send-email-akaher@vmware.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf trace: Handle failure when trace point folder is missed

[ Upstream commit 03e9a5d8eb552a1bf692a9c8a5ecd50f4e428006 ]

On Arm64 a case is perf tools fails to find the corresponding trace
point folder for system calls listed in the table 'syscalltbl_arm64',
e.g. the generated system call table contains "lookup_dcookie" but we
cannot find out the matched trace point folder for it.

We need to figure out if there have any issue for the generated system
call table, on the other hand, we need to handle the case when trace
point folder is missed under sysfs, this patch sets the flag
syscall::nonexistent as true and returns the error from
trace__read_syscall_info().

Another problem is for trace__syscall_info(), it returns two different
values if a system call doesn't exist: at the first time calling
trace__syscall_info() it returns NULL when the system call doesn't exist,
later if call trace__syscall_info() again for the same missed system
call, it returns pointer of syscall.  trace__syscall_info() checks the
condition 'syscalls.table[id].name == NULL', but the name will be
assigned in the first invoking even the system call is not found.

So checking system call's name in trace__syscall_info() is not the right
thing to do, this patch simply checks flag syscall::nonexistent to make
decision if a system call exists or not, finally trace__syscall_info()
returns the consistent result (NULL) if a system call doesn't existed.

Fixes: b8b1033fcaa091d8 ("perf trace: Mark syscall ids that are not allocated to avoid unnecessary error messages")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221121075237.127706-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf trace: Use macro RAW_SYSCALL_ARGS_NUM to replace number

[ Upstream commit eadcab4c7a66e1df03d32da0db55d89fd9343fcc ]

This patch defines a macro RAW_SYSCALL_ARGS_NUM to replace the open
coded number '6'.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221121075237.127706-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 03e9a5d8eb55 ("perf trace: Handle failure when trace point folder is missed")
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf trace: Return error if a system call doesn't exist

[ Upstream commit d4223e1776c30b2ce8d0e6eaadcbf696e60fca3c ]

When a system call is not detected, the reason is either because the
system call ID is out of scope or failure to find the corresponding path
in the sysfs, trace__read_syscall_info() returns zero.  Finally, without
returning an error value it introduces confusion for the caller.

This patch lets the function trace__read_syscall_info() to return
-EEXIST when a system call doesn't exist.

Fixes: b8b1033fcaa091d8 ("perf trace: Mark syscall ids that are not allocated to avoid unnecessary error messages")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221121075237.127706-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: fix residue sysfs file in error handle route of __power_supply_register()

[ Upstream commit 5b79480ce1978864ac3f06f2134dfa3b6691fe74 ]

If device_add() succeeds, we should call device_del() when want to
get rid of it, so move it into proper jump symbol.

Otherwise, when __power_supply_register() returns fail and goto
wakeup_init_failed to exit, there is still residue device file in sysfs.
When attempt to probe device again, sysfs would complain as below:

sysfs: cannot create duplicate filename '/devices/platform/i2c/i2c-0/0-001c/power_supply/adp5061'
Call Trace:
 dump_stack_lvl+0x68/0x85
 sysfs_warn_dup.cold+0x1c/0x29
 sysfs_create_dir_ns+0x1b1/0x1d0
 kobject_add_internal+0x143/0x390
 kobject_add+0x108/0x170

Fixes: 80c6463e2fa3 ("power_supply: Fix Oops from NULL pointer dereference from wakeup_source_activate")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HSI: omap_ssi_core: fix possible memory leak in ssi_probe()

[ Upstream commit 1aff514e1d2bd47854dbbdf867970b9d463d4c57 ]

If ssi_add_controller() returns error, it should call hsi_put_controller()
to give up the reference that was set in hsi_alloc_controller(), so that
it can call hsi_controller_release() to free controller and ports that
allocated in hsi_alloc_controller().

Fixes: b209e047bc74 ("HSI: Introduce OMAP SSI driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HSI: omap_ssi_core: fix unbalanced pm_runtime_disable()

[ Upstream commit f5181c35ed7ba0ceb6e42872aad1334d994b0175 ]

In error label 'out1' path in ssi_probe(), the pm_runtime_enable()
has not been called yet, so pm_runtime_disable() is not needed.

Fixes: b209e047bc74 ("HSI: Introduce OMAP SSI driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: uvesafb: Fixes an error handling path in uvesafb_probe()

[ Upstream commit a94371040712031ba129c7e9d8ff04a06a2f8207 ]

If an error occurs after a successful uvesafb_init_mtrr() call, it must be
undone by a corresponding arch_phys_wc_del() call, as already done in the
remove function.

This has been added in the remove function in commit 63e28a7a5ffc
("uvesafb: Clean up MTRR code")

Fixes: 8bdb3a2d7df4 ("uvesafb: the driver core")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: uvesafb: don't build on UML

[ Upstream commit 35b4f4d4a725cf8f8c10649163cd12aed509b953 ]

The uvesafb fbdev driver uses memory management information that is not
available on ARCH=um, so don't allow this driver to be built on UML.

Prevents these build errors:

../drivers/video/fbdev/uvesafb.c: In function ‘uvesafb_vbe_init’:
../drivers/video/fbdev/uvesafb.c:807:21: error: ‘__supported_pte_mask’ undeclared (first use in this function)
  807 |                 if (__supported_pte_mask & _PAGE_NX) {
../drivers/video/fbdev/uvesafb.c:807:44: error: ‘_PAGE_NX’ undeclared (first use in this function)
  807 |                 if (__supported_pte_mask & _PAGE_NX) {

Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-um@lists.infradead.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: geode: don't build on UML

[ Upstream commit 71c53e19226b0166ba387d3c590d0509f541a0a1 ]

The geode fbdev driver uses struct cpuinfo fields that are not present
on ARCH=um, so don't allow this driver to be built on UML.

Prevents these build errors:

In file included from ../arch/x86/include/asm/olpc.h:7:0,
                 from ../drivers/mfd/cs5535-mfd.c:17:
../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’:
../arch/x86/include/asm/geode.h:16:24: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
  return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:16:39: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
  return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:17:17: error: ‘struct cpuinfo_um’ has no member named ‘x86’
   (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:18:17: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
   (boot_cpu_data.x86_model == 5));
../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’:
../arch/x86/include/asm/geode.h:23:24: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
  return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:23:39: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
  return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:24:17: error: ‘struct cpuinfo_um’ has no member named ‘x86’
   (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:25:17: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
   (boot_cpu_data.x86_model == 10));

Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-um@lists.infradead.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Andres Salomon <dilinger@queued.net>
Cc: linux-geode@lists.infradead.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: ep93xx-fb: Add missing clk_disable_unprepare in ep93xxfb_probe()

[ Upstream commit c84bf485a5aaf9aa0764a58832b7ef4375c29f03 ]

The clk_disable_unprepare() should be called in the error handling
of register_framebuffer(), fix it.

Fixes: 0937a7b3625d ("video: ep93xx: Prepare clock before using it")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: vermilion: decrease reference count in error path

[ Upstream commit 001f2cdb952a9566c77fb4b5470cc361db5601bb ]

pci_get_device() will increase the reference count for the returned
pci_dev. For the error path, we need to use pci_dev_put() to decrease
the reference count.

Fixes: dbe7e429fedb ("vmlfb: framebuffer driver for Intel Vermilion Range")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: via: Fix error in via_core_init()

[ Upstream commit 5886b130de953cfb8826f7771ec8640a79934a7f ]

via_core_init() won't exit the driver when pci_register_driver() failed.
Exit the viafb-i2c and the viafb-gpio in failed path to prevent error.

VIA Graphics Integration Chipset framebuffer 2.4 initializing
Error: Driver 'viafb-i2c' is already registered, aborting...
Error: Driver 'viafb-gpio' is already registered, aborting...

Fixes: 7582eb9be85f ("viafb: Turn GPIO and i2c into proper platform devices")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: pm2fb: fix missing pci_disable_device()

[ Upstream commit ed359a464846b48f76ea6cc5cd8257e545ac97f4 ]

Add missing pci_disable_device() in error path of probe() and remove() path.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: ssd1307fb: Drop optional dependency

[ Upstream commit 025e3b507a3a8e1ee96a3112bb67495c77d6cdb6 ]

Only a single out of three devices need a PWM, so from driver it's
optional. Moreover it's a single driver in the entire kernel that
currently selects PWM. Unfortunately this selection is a root cause
of the circular dependencies when we want to enable optional PWM
for some other drivers that select GPIOLIB.

Fixes: a2ed00da5047 ("drivers/video: add support for the Solomon SSD1307 OLED Controller")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/drivers/qcom/lmh: Fix irq handler return value

[ Upstream commit 46a891e45be97c6781ac34f5ec777d69370e252b ]

After enough invocations the LMh irq is eventually reported as bad, because the
handler doesn't return IRQ_HANDLED, fix this.

Fixes: 53bca371cdf7 ("thermal/drivers/qcom: Add support for LMh driver")
Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220316180322.88132-1-bjorn.andersson@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2

[ Upstream commit 8763f8acbf8aef22a2321d4c978cd078aa3b8f64 ]

On gen2 chips the stage2 threshold is not 140 degC but 125 degC.

Make the warning message clearer by using this variable and also by
including the temperature that was checked for.

Fixes: aa92b3310c55 ("thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 1 PMIC peripherals")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Amit Kucheria <amitk@kernel.org>
Link: https://lore.kernel.org/r/20221020145237.942146-1-luca.weiss@fairphone.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/drivers/imx8mm_thermal: Validate temperature range

[ Upstream commit d37edc7370273306d8747097fafa62436c1cfe16 ]

Check against the upper temperature limit (125 degrees C) before
consider the temperature valid.

Fixes: 5eed800a6811 ("thermal: imx8mm: Add support for i.MX8MM thermal monitoring unit")
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Link: https://lore.kernel.org/r/20221014073507.1594844-1-marcus.folkesson@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe()

[ Upstream commit d1f0f50fbbbbca1e3e8157e51934613bf88f6d44 ]

Add missing pci_disable_device() in fail path of mdpy_fb_probe().
Besides, fix missing release functions in mdpy_fb_remove().

Fixes: cacade1946a4 ("sample: vfio mdev display - guest driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221208013341.3999-1-shangxiaojing@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksmbd: Fix resource leak in ksmbd_session_rpc_open()

[ Upstream commit bc044414fa0326a4e5c3c509c00b1fcaf621b5f4 ]

When ksmbd_rpc_open() fails then it must call ksmbd_rpc_id_free() to
undo the result of ksmbd_ipc_id_alloc().

Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing/hist: Fix issue of losting command info in error_log

[ Upstream commit 608c6ed3337850c767ab0dd6c583477922233e29 ]

When input some constructed invalid 'trigger' command, command info
in 'error_log' are lost [1].

The root cause is that there is a path that event_hist_trigger_parse()
is recursely called once and 'last_cmd' which save origin command is
cleared, then later calling of hist_err() will no longer record origin
command info:

  event_hist_trigger_parse() {
    last_cmd_set()  // <1> 'last_cmd' save origin command here at first
    create_actions() {
      onmatch_create() {
        action_create() {
          trace_action_create() {
            trace_action_create_field_var() {
              create_field_var_hist() {
                event_hist_trigger_parse() {  // <2> recursely called once
                  hist_err_clear()  // <3> 'last_cmd' is cleared here
                }
                hist_err()  // <4> No longer find origin command!!!

Since 'glob' is empty string while running into the recurse call, we
can trickly check it and bypass the call of hist_err_clear() to solve it.

[1]
 # cd /sys/kernel/tracing
 # echo "my_synth_event int v1; int v2; int v3;" >> synthetic_events
 # echo 'hist:keys=pid' >> events/sched/sched_waking/trigger
 # echo "hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(\
pid,pid1)" >> events/sched/sched_switch/trigger
 # cat error_log
[  8.405018] hist:sched:sched_switch: error: Couldn't find synthetic event
  Command:
hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(pid,pid1)
                                                          ^
[  8.816902] hist:sched:sched_switch: error: Couldn't find field
  Command:
hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(pid,pid1)
                          ^
[  8.816902] hist:sched:sched_switch: error: Couldn't parse field variable
  Command:
hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(pid,pid1)
                          ^
[  8.999880] : error: Couldn't find field
  Command:
           ^
[  8.999880] : error: Couldn't parse field variable
  Command:
           ^
[  8.999880] : error: Couldn't find field
  Command:
           ^
[  8.999880] : error: Couldn't create histogram for field
  Command:
           ^

Link: https://lore.kernel.org/linux-trace-kernel/20221207135326.3483216-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <zanussi@kernel.org>
Fixes: f404da6e1d46 ("tracing: Add 'last error' error facility for hist triggers")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: storage: Add check for kcalloc

[ Upstream commit c35ca10f53c51eeb610d3f8fbc6dd6d511b58a58 ]

As kcalloc may return NULL pointer, the return value should
be checked and return error if fails as same as the ones in
alauda_read_map.

Fixes: e80b0fade09e ("[PATCH] USB Storage: add alauda support")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20221208110058.12983-1-jiasheng@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: ismt: Fix an out-of-bounds bug in ismt_access()

[ Upstream commit 39244cc754829bf707dccd12e2ce37510f5b1f8d ]

When the driver does not check the data from the user, the variable
'data->block[0]' may be very large to cause an out-of-bounds bug.

The following log can reveal it:

[   33.995542] i2c i2c-1: ioctl, cmd=0x720, arg=0x7ffcb3dc3a20
[   33.995978] ismt_smbus 0000:00:05.0: I2C_SMBUS_BLOCK_DATA:  WRITE
[   33.996475] ==================================================================
[   33.996995] BUG: KASAN: out-of-bounds in ismt_access.cold+0x374/0x214b
[   33.997473] Read of size 18446744073709551615 at addr ffff88810efcfdb1 by task ismt_poc/485
[   33.999450] Call Trace:
[   34.001849]  memcpy+0x20/0x60
[   34.002077]  ismt_access.cold+0x374/0x214b
[   34.003382]  __i2c_smbus_xfer+0x44f/0xfb0
[   34.004007]  i2c_smbus_xfer+0x10a/0x390
[   34.004291]  i2cdev_ioctl_smbus+0x2c8/0x710
[   34.005196]  i2cdev_ioctl+0x5ec/0x74c

Fix this bug by checking the size of 'data->block[0]' first.

Fixes: 13f35ac14cd0 ("i2c: Adding support for Intel iSMT SMBus 2.0 host controller")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: mux: reg: check return value after calling platform_get_resource()

[ Upstream commit 2d47b79d2bd39cc6369eccf94a06568d84c906ae ]

It will cause null-ptr-deref in resource_size(), if platform_get_resource()
returns NULL, move calling resource_size() after devm_ioremap_resource() that
will check 'res' to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.

Fixes: b3fdd32799d8 ("i2c: mux: Add register-based mux i2c-mux-reg")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: protect the GPIO device against being dropped while in use by user-space

[ Upstream commit bdbbae241a04f387ba910b8609f95fad5f1470c7 ]

While any of the GPIO cdev syscalls is in progress, the kernel can call
gpiochip_remove() (for instance, when a USB GPIO expander is disconnected)
which will set gdev->chip to NULL after which any subsequent access will
cause a crash.

To avoid that: use an RW-semaphore in which the syscalls take it for
reading (so that we don't needlessly prohibit the user-space from calling
syscalls simultaneously) while gpiochip_remove() takes it for writing so
that it can only happen once all syscalls return.

Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL")
Fixes: aad955842d1c ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL")
Fixes: a54756cb24ea ("gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL")
Fixes: 7b8e00d98168 ("gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
[Nick: fixed a build failure with CDEV_V1 disabled]
Co-authored-by: Nick Hainke <vincent@systemli.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: make struct comments into real kernel docs

[ Upstream commit 4398693a9e24bcab0b99ea219073917991d0792b ]

We have several comments that start with '/**' but don't conform to the
kernel doc standard. Add proper detailed descriptions for the affected
definitions and move the docs from the forward declarations to the
struct definitions where applicable.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Stable-dep-of: bdbbae241a04 ("gpiolib: protect the GPIO device against being dropped while in use by user-space")
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: cdev: fix NULL-pointer dereferences

[ Upstream commit 533aae7c94dbc2b14301cfd68ae7e0e90f0c8438 ]

There are several places where we can crash the kernel by requesting
lines, unbinding the GPIO device, then calling any of the system calls
relevant to the GPIO character device's annonymous file descriptors:
ioctl(), read(), poll().

While I observed it with the GPIO simulator, it will also happen for any
of the GPIO devices that can be hot-unplugged - for instance any HID GPIO
expander (e.g. CP2112).

This affects both v1 and v2 uAPI.

This fixes it partially by checking if gdev->chip is not NULL but it
doesn't entirely remedy the situation as we still have a race condition
in which another thread can remove the device after the check.

Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL")
Fixes: aad955842d1c ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL")
Fixes: a54756cb24ea ("gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL")
Fixes: 7b8e00d98168 ("gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: Get rid of redundant 'else'

[ Upstream commit 1cef8b5019769d46725932eeace7a383bca97905 ]

In the snippets like the following

if (...)
return / goto / break / continue ...;
else
...

the 'else' is redundant. Get rid of it. In case of IOCTLs use
switch-case pattern that seems the usual in such cases.

While at it, clarify necessity of else in gpiod_direction_output()
by attaching else if to the closing curly brace on a previous line.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Stable-dep-of: 533aae7c94db ("gpiolib: cdev: fix NULL-pointer dereferences")
Signed-off-by: Sasha Levin <sashal@kernel.org>

vme: Fix error not catched in fake_init()

[ Upstream commit 7bef797d707f1744f71156b21d41e3b8c946631f ]

In fake_init(), __root_device_register() is possible to fail but it's
ignored, which can cause unregistering vme_root fail when exit.

 general protection fault,
 probably for non-canonical address 0xdffffc000000008c
 KASAN: null-ptr-deref in range [0x0000000000000460-0x0000000000000467]
 RIP: 0010:root_device_unregister+0x26/0x60
 Call Trace:
  <TASK>
  __x64_sys_delete_module+0x34f/0x540
  do_syscall_64+0x38/0x90
  entry_SYSCALL_64_after_hwframe+0x63/0xcd

Return error when __root_device_register() fails.

Fixes: 658bcdae9c67 ("vme: Adding Fake VME driver")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221205084805.147436-1-chenzhongjin@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8192e: Fix potential use-after-free in rtllib_rx_Monitor()

[ Upstream commit d30f4436f364b4ad915ca2c09be07cd0f93ceb44 ]

The skb is delivered to netif_rx() in rtllib_monitor_rx(), which may free it,
after calling this, dereferencing skb may trigger use-after-free.
Found by Smatch.

Fixes: 94a799425eee ("From: wlanfae <wlanfae@realtek.com> [PATCH 1/8] rtl8192e: Import new version of driver from realtek")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20221123081253.22296-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8192u: Fix use after free in ieee80211_rx()

[ Upstream commit bcc5e2dcf09089b337b76fc1a589f6ff95ca19ac ]

We cannot dereference the "skb" pointer after calling
ieee80211_monitor_rx(), because it is a use after free.

Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y33BArx3k/aw6yv/@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe

[ Upstream commit d78a167332e1ca8113268ed922c1212fd71b73ad ]

Using pcim_enable_device() to avoid missing pci_disable_device().

Fixes: 7e94dd154e93 ("i2c-pxa2xx: Add PCI support for PXA I2C controller")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

chardev: fix error handling in cdev_device_add()

[ Upstream commit 11fa7fefe3d8fac7da56bc9aa3dd5fb3081ca797 ]

While doing fault injection test, I got the following report:

------------[ cut here ]------------
kobject: '(null)' (0000000039956980): is not initialized, yet kobject_put() is being called.
WARNING: CPU: 3 PID: 6306 at kobject_put+0x23d/0x4e0
CPU: 3 PID: 6306 Comm: 283 Tainted: G        W          6.1.0-rc2-00005-g307c1086d7c9 #1253
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:kobject_put+0x23d/0x4e0
Call Trace:
 <TASK>
 cdev_device_add+0x15e/0x1b0
 __iio_device_register+0x13b4/0x1af0 [industrialio]
 __devm_iio_device_register+0x22/0x90 [industrialio]
 max517_probe+0x3d8/0x6b4 [max517]
 i2c_device_probe+0xa81/0xc00

When device_add() is injected fault and returns error, if dev->devt is not set,
cdev_add() is not called, cdev_del() is not needed. Fix this by checking dev->devt
in error path.

Fixes: 233ed09d7fda ("chardev: add helper function to register char devs with a struct device")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221202030237.520280-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mcb: mcb-parse: fix error handing in chameleon_parse_gdd()

[ Upstream commit 728ac3389296caf68638628c987aeae6c8851e2d ]

If mcb_device_register() returns error in chameleon_parse_gdd(), the refcount
of bus and device name are leaked. Fix this by calling put_device() to give up
the reference, so they can be released in mcb_release_dev() and kobject_cleanup().

Fixes: 3764e82e5150 ("drivers: Introduce MEN Chameleon Bus")
Reviewed-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/ebfb06e39b19272f0197fa9136b5e4b6f34ad732.1669624063.git.johannes.thumshirn@wdc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: mcb: fix resource leak in mcb_probe()

[ Upstream commit d7237462561fcd224fa687c56ccb68629f50fc0d ]

When probe hook function failed in mcb_probe(), it doesn't put the device.
Compiled test only.

Fixes: 7bc364097a89 ("mcb: Acquire reference to device in probe")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/9f87de36bfb85158b506cb78c6fc9db3f6a3bad1.1669624063.git.johannes.thumshirn@wdc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: f_hid: fix refcount leak on error path

[ Upstream commit 70a3288a7586526315105c699b687d78cd32559a ]

When failing to allocate report_desc, opts->refcnt has already been
incremented so it needs to be decremented to avoid leaving the options
structure permanently locked.

Fixes: 21a9476a7ba8 ("usb: gadget: hid: add configfs support")
Tested-by: Lee Jones <lee@kernel.org>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20221122123523.3068034-3-john@metanate.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: f_hid: fix f_hidg lifetime vs cdev

[ Upstream commit 89ff3dfac604614287ad5aad9370c3f984ea3f4b ]

The embedded struct cdev does not have its lifetime correctly tied to
the enclosing struct f_hidg, so there is a use-after-free if /dev/hidgN
is held open while the gadget is deleted.

This can readily be replicated with libusbgx's example programs (for
conciseness - operating directly via configfs is equivalent):

gadget-hid
exec 3<> /dev/hidg0
gadget-vid-pid-remove
exec 3<&-

Pull the existing device up in to struct f_hidg and make use of the
cdev_device_{add,del}() helpers.  This changes the lifetime of the
device object to match struct f_hidg, but note that it is still added
and deleted at the same time.

Fixes: 71adf1189469 ("USB: gadget: add HID gadget driver")
Tested-by: Lee Jones <lee@kernel.org>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20221122123523.3068034-2-john@metanate.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: roles: fix of node refcount leak in usb_role_switch_is_parent()

[ Upstream commit 1ab30c610630da5391a373cddb8a065bf4c4bc01 ]

I got the following report while doing device(mt6370-tcpc) load
test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled:

  OF: ERROR: memory leak, expected refcount 1 instead of 2,
  of_node_get()/of_node_put() unbalanced - destroy cset entry:
  attach overlay node /i2c/pmic@34

The 'parent' returned by fwnode_get_parent() with refcount incremented.
it needs be put after using.

Fixes: 6fadd72943b8 ("usb: roles: get usb-role-switch from parent")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221122111226.251588-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: trbe: remove cpuhp instance node before remove cpuhp state

[ Upstream commit 20ee8c223f792947378196307d8e707c9cdc2d61 ]

cpuhp_state_add_instance() and cpuhp_state_remove_instance() should
be used in pairs. Or there will lead to the warn on
cpuhp_remove_multi_state() since the cpuhp_step list is not empty.

The following is the error log with 'rmmod coresight-trbe':
Error: Removing state 215 which has instances left.
Call trace:
  __cpuhp_remove_state_cpuslocked+0x144/0x160
  __cpuhp_remove_state+0xac/0x100
  arm_trbe_device_remove+0x2c/0x60 [coresight_trbe]
  platform_remove+0x34/0x70
  device_remove+0x54/0x90
  device_release_driver_internal+0x1e4/0x250
  driver_detach+0x5c/0xb0
  bus_remove_driver+0x64/0xc0
  driver_unregister+0x3c/0x70
  platform_driver_unregister+0x20/0x30
  arm_trbe_exit+0x1c/0x658 [coresight_trbe]
  __arm64_sys_delete_module+0x1ac/0x24c
  invoke_syscall+0x50/0x120
  el0_svc_common.constprop.0+0x58/0x1a0
  do_el0_svc+0x38/0xd0
  el0_svc+0x2c/0xc0
  el0t_64_sync_handler+0x1ac/0x1b0
  el0t_64_sync+0x19c/0x1a0
 ---[ end trace 0000000000000000 ]---

Fixes: 3fbf7f011f24 ("coresight: sink: Add TRBE driver")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221122090355.23533-1-shenyang39@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update

[ Upstream commit fd5ac974fc25feed084c2d1599d0dddb4e0556bc ]

The ARR (auto reload register) and CMP (compare) registers are
successively written. The status bits to check the update of these
registers are polled together with regmap_read_poll_timeout().
The condition to end the loop may become true, even if one of the register
isn't correctly updated.
So ensure both status bits are set before clearing them.

Fixes: d8958824cf07 ("iio: counter: Add support for STM32 LPTimer")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20221123133609.465614-1-fabrice.gasnier@foss.st.com/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adis: add '__adis_enable_irq()' implementation

[ Upstream commit 99c05e4283a19a02a256f14100ca4ec3b2da3f62 ]

Add '__adis_enable_irq()' implementation which is the unlocked
version of 'adis_enable_irq()'.
Call '__adis_enable_irq()' instead of 'adis_enable_irq()' from
'__adis_intial_startup()' to keep the expected unlocked functionality.

This fix is needed to remove a deadlock for all devices which are
using 'adis_initial_startup()'. The deadlock occurs because the
same mutex is acquired twice, without releasing it.
The mutex is acquired once inside 'adis_initial_startup()', before
calling '__adis_initial_startup()', and once inside
'adis_enable_irq()', which is called by '__adis_initial_startup()'.
The deadlock is removed by calling '__adis_enable_irq()', instead of
'adis_enable_irq()' from within '__adis_initial_startup()'.

Fixes: b600bd7eb3335 ("iio: adis: do not disabe IRQs in 'adis_init()'")
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221122082757.449452-2-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio:imu:adis: Move exports into IIO_ADISLIB namespace

[ Upstream commit 6c9304d6af122f9afea41885ad82ed627e9442a8 ]

In order to avoid unneessary pollution of the global symbol namespace
move the common/library functions into a specific namespace and import
that into the various specific device drivers that use them.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Song Bao Hua (Barry Song) <song.bao.hua@hisilicon.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220130205701.334592-9-jic23@kernel.org
Stable-dep-of: 99c05e4283a1 ("iio: adis: add '__adis_enable_irq()' implementation")
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adis: stylistic changes

[ Upstream commit c39010ea6ba13bdf0003bd353e1d4c663aaac0a8 ]

Minor stylistic changes to address checkptach complains when called with
'--strict'.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220122130905.99-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 99c05e4283a1 ("iio: adis: add '__adis_enable_irq()' implementation")
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adis: handle devices that cannot unmask the drdy pin

[ Upstream commit 31fa357ac809affd9f9a7d0b5d1991951e16beec ]

Some devices can't mask/unmask the data ready pin and in those cases
each driver was just calling '{dis}enable_irq()' to control the trigger
state. This change, moves that handling into the library by introducing
a new boolean in the data structure that tells the library that the
device cannot unmask the pin.

On top of controlling the trigger state, we can also use this flag to
automatically request the IRQ with 'IRQF_NO_AUTOEN' in case it is set.
So far, all users of the library want to start operation with IRQs/DRDY
pin disabled so it should be fairly safe to do this inside the library.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210903141423.517028-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 99c05e4283a1 ("iio: adis: add '__adis_enable_irq()' implementation")
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: temperature: ltc2983: make bulk write buffer DMA-safe

[ Upstream commit 5e0176213949724fbe9a8e4a39817edce337b8a0 ]

regmap_bulk_write() does not guarantee implicit DMA-safety,
even though the current implementation duplicates the given
buffer. Do not rely on it.

Fixes: f110f3188e56 ("iio: temperature: Add support for LTC2983")
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Link: https://lore.kernel.org/r/20221103130041.2153295-2-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter()

[ Upstream commit 02cd3032b154fa02fdf90e7467abaeed889330b2 ]

If device_register() fails in cxl_pci_afu|adapter(), the device
is not added, device_unregister() can not be called in the error
path, otherwise it will cause a null-ptr-deref because of removing
not added device.

As comment of device_register() says, it should use put_device() to give
up the reference in the error path. So split device_unregister() into
device_del() and put_device(), then goes to put dev when register fails.

Fixes: f204e0b8cedd ("cxl: Driver code for powernv PCIe based cards for userspace access")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/20221111145440.2426970-2-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter()

[ Upstream commit 61c80d1c3833e196256fb060382db94f24d3d9a7 ]

If device_register() fails in cxl_register_afu|adapter(), the device
is not added, device_unregister() can not be called in the error path,
otherwise it will cause a null-ptr-deref because of removing not added
device.

As comment of device_register() says, it should use put_device() to give
up the reference in the error path. So split device_unregister() into
device_del() and put_device(), then goes to put dev when register fails.

Fixes: 14baf4d9c739 ("cxl: Add guest-specific code")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Link: https://lore.kernel.org/r/20221111145440.2426970-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe()

[ Upstream commit 7b51161696e803fd5f9ad55b20a64c2df313f95c ]

In rpi_firmware_probe(), if mbox_request_channel() fails, the 'fw' will
not be freed through rpi_firmware_delete(), fix this leak by calling
kfree() in the error path.

Fixes: 1e7c57355a3b ("firmware: raspberrypi: Keep count of all consumers")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221117070636.3849773-1-yangyingliang@huawei.com
Acked-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: sgi-gru: fix use-after-free error in gru_set_context_option, gru_fault and gru_handle_user_call_os

[ Upstream commit 643a16a0eb1d6ac23744bb6e90a00fc21148a9dc ]

In some bad situation, the gts may be freed gru_check_chiplet_assignment.
The call chain can be gru_unload_context->gru_free_gru_context->gts_drop
and kfree finally. However, the caller didn't know if the gts is freed
or not and use it afterwards. This will trigger a Use after Free bug.

Fix it by introducing a return value to see if it's in error path or not.
Free the gts in caller if gru_check_chiplet_assignment check failed.

Fixes: 55484c45dbec ("gru: allow users to specify gru chiplet 2")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Acked-by: Dimitri Sivanich <sivanich@hpe.com>
Link: https://lore.kernel.org/r/20221110035033.19498-1-zyytlz.wz@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: tifm: fix possible memory leak in tifm_7xx1_switch_media()

[ Upstream commit fd2c930cf6a5b9176382c15f9acb1996e76e25ad ]

If device_register() returns error in tifm_7xx1_switch_media(),
name of kobject which is allocated in dev_set_name() called in device_add()
is leaked.

Never directly free @dev after calling device_register(), even
if it returned an error! Always use put_device() to give up the
reference initialized.

Fixes: 2428a8fe2261 ("tifm: move common device management tasks from tifm_7xx1 to tifm_core")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20221117064725.3478402-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ocxl: fix pci device refcount leak when calling get_function_0()

[ Upstream commit 27158c72678b39ee01cc01de1aba6b51c71abe2f ]

get_function_0() calls pci_get_domain_bus_and_slot(), as comment
says, it returns a pci device with refcount increment, so after
using it, pci_dev_put() needs be called.

Get the device reference when get_function_0() is not called, so
pci_dev_put() can be called in the error path and callers
unconditionally. And add comment above get_dvsec_vendor0() to tell
callers to call pci_dev_put().

Fixes: 87db7579ebd5 ("ocxl: control via sysfs whether the FPGA is reloaded on a link reset")
Suggested-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/20221121154339.4088935-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: ocxl: fix possible name leak in ocxl_file_register_afu()

[ Upstream commit a4cb1004aeed2ab893a058fad00a5b41a12c4691 ]

If device_register() returns error in ocxl_file_register_afu(),
the name allocated by dev_set_name() need be freed. As comment
of device_register() says, it should use put_device() to give
up the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup(),
and info is freed in info_release().

Fixes: 75ca758adbaf ("ocxl: Create a clear delineation between ocxl backend & frontend")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Link: https://lore.kernel.org/r/20221111145929.2429271-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

test_firmware: fix memory leak in test_firmware_init()

[ Upstream commit 7610615e8cdb3f6f5bbd9d8e7a5d8a63e3cabf2e ]

When misc_register() failed in test_firmware_init(), the memory pointed
by test_fw_config->name is not released. The memory leak information is
as follows:
unreferenced object 0xffff88810a34cb00 (size 32):
  comm "insmod", pid 7952, jiffies 4294948236 (age 49.060s)
  hex dump (first 32 bytes):
    74 65 73 74 2d 66 69 72 6d 77 61 72 65 2e 62 69  test-firmware.bi
    6e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  n...............
  backtrace:
    [<ffffffff81b21fcb>] __kmalloc_node_track_caller+0x4b/0xc0
    [<ffffffff81affb96>] kstrndup+0x46/0xc0
    [<ffffffffa0403a49>] __test_firmware_config_init+0x29/0x380 [test_firmware]
    [<ffffffffa040f068>] 0xffffffffa040f068
    [<ffffffff81002c41>] do_one_initcall+0x141/0x780
    [<ffffffff816a72c3>] do_init_module+0x1c3/0x630
    [<ffffffff816adb9e>] load_module+0x623e/0x76a0
    [<ffffffff816af471>] __do_sys_finit_module+0x181/0x240
    [<ffffffff89978f99>] do_syscall_64+0x39/0xb0
    [<ffffffff89a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: c92316bf8e94 ("test_firmware: add batched firmware tests")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20221119035721.18268-1-shaozhengchao@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: sunsab: Fix error handling in sunsab_init()

[ Upstream commit 1a6ec673fb627c26e2267ca0a03849f91dbd9b40 ]

The sunsab_init() returns the platform_driver_register() directly without
checking its return value, if platform_driver_register() failed, the
allocated sunsab_ports is leaked.
Fix by free sunsab_ports and set it to NULL when platform_driver_register()
failed.

Fixes: c4d37215a824 ("[SERIAL] sunsab: Convert to of_driver framework.")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221123061212.52593-1-yuancan@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: altera_uart: fix locking in polling mode

[ Upstream commit 1307c5d33cce8a41dd77c2571e4df65a5b627feb ]

Since altera_uart_interrupt() may also be called from
a poll timer in "serving_softirq" context, use
spin_[lock_irqsave|unlock_irqrestore] variants, which
are appropriate for both softirq and hardware interrupt
contexts.

Fixes: 2f8b9c15cd88 ("altera_uart: Add support for polling mode (IRQ-less)")
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Link: https://lore.kernel.org/r/20221122200426.888349-1-gsomlo@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: altera_uart_{r,t}x_chars() need only uart_port

[ Upstream commit 3af44d9bb0539d5fa27d6159d696fda5f3747bff ]

Both altera_uart_{r,t}x_chars() need only uart_port, not altera_uart. So
pass the former from altera_uart_interrupt() directly.

Apart it maybe saves a dereference, this makes the transition of
altera_uart_tx_chars() easier to follow in the next patch.

Cc: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220920052049.20507-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 1307c5d33cce ("serial: altera_uart: fix locking in polling mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: clean up stop-tx part in altera_uart_tx_chars()

[ Upstream commit d9c128117da41cf4cb0e80ae565b5d3ac79dffac ]

The "stop TX" path in altera_uart_tx_chars() is open-coded, so:
* use uart_circ_empty() to check if the buffer is empty, and
* when true, call altera_uart_stop_tx().

Cc: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220920052049.20507-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 1307c5d33cce ("serial: altera_uart: fix locking in polling mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: pch: Fix PCI device refcount leak in pch_request_dma()

[ Upstream commit 8be3a7bf773700534a6e8f87f6ed2ed111254be5 ]

As comment of pci_get_slot() says, it returns a pci_device with its
refcount increased. The caller must decrement the reference count by
calling pci_dev_put().

Since 'dma_dev' is only used to filter the channel in filter(), we can
call pci_dev_put() before exiting from pch_request_dma(). Add the
missing pci_dev_put() for the normal and error path.

Fixes: 3c6a483275f4 ("Serial: EG20T: add PCH_UART driver")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221122114559.27692-1-wangxiongfeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>