Tom Rini [Sun, 4 Jun 2017 17:13:29 +0000 (13:13 -0400)]
Merge git://git.denx.de/u-boot-fdt
Tom Rini [Sat, 3 Jun 2017 22:05:28 +0000 (18:05 -0400)]
Merge git://git.denx.de/u-boot-net
Tom Rini [Sat, 3 Jun 2017 22:05:04 +0000 (18:05 -0400)]
Merge git://git.denx.de/u-boot-fsl-qoriq
Tom Rini [Sat, 3 Jun 2017 22:04:54 +0000 (18:04 -0400)]
Merge git://git.denx.de/u-boot-sunxi
Tom Rini [Fri, 2 Jun 2017 15:03:50 +0000 (11:03 -0400)]
Kconfig: Migrate FS_FAT / FAT_WRITE
Now that these symbols are in Kconfig, migrate all users. Use imply on
a number of platforms that default to having this enabled. As part of
this we must migrate some straglers for CMD_FAT and DOS_PARTITION.
Signed-off-by: Tom Rini <trini@konsulko.com>
Sekhar Nori [Fri, 2 Jun 2017 12:24:04 +0000 (17:54 +0530)]
board: ti: enable support for writing to fat partition
Enable support for writing to FAT partitions on
TI's boards.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Sekhar Nori [Fri, 2 Jun 2017 12:24:02 +0000 (17:54 +0530)]
config_fallbacks: add additional fallbacks for fat filesystem
Add fallbacks needed to keep all boards building
while they are migrated to use Kconfig symbols
instead of defines in <board>_config.h files for
FAT filesystem.
These should eventually go away once Kconfig select
or imply statements are put in place and duplicated
defines in <board>_config.h removed.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
[trini: Update logic since CMD_FAT / CONFIG_SPL_FAT_SUPPORT are
selecting FS_FAT]
Signed-off-by: Tom Rini <trini@konsulko.com>
Sekhar Nori [Fri, 2 Jun 2017 12:24:01 +0000 (17:54 +0530)]
configs: k2g_evm: make sure config fallbacks take effect
Since config fallbacks contained in include/config_fallbacks.h
come into k2g_evm.h file through ti_armv7_keystone2.h, it should
be the last file included.
Without this, #define of FAT_WRITE when environment is in FAT
does not happen as the environment location is decided later
in the file.
Similar issues can come with other config fallbacks implemented.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Sekhar Nori [Fri, 2 Jun 2017 12:24:00 +0000 (17:54 +0530)]
configs: k2*_evm: let each board decide env location
Not all TI Keystone2 EVMs want environment in NAND flash.
K2G EVM which has an MMC/SD slot, keep environment in a
FAT partition on SD card.
Since ti_armv7_keystone2.h defines environment is in NAND,
boards which do not follow that have to #undef'ine that
configuration. This leads to ugly ordering issues around
where exactly the include of ti_armv7_keystone2.h can come
in within the k2*_evm.h files.
Move environment location to config file of each board.
This should make it easy to change it for any one board
without affecting all other boards.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Sekhar Nori [Fri, 2 Jun 2017 12:23:59 +0000 (17:53 +0530)]
fs: fat: add kbuild configuration support
Add Kconfig symbols for various configurations
supported by FAT filesystem support code.
CONFIG_SUPPORT_VFAT has been left out since its
force enabled in include/fat.h and probably
should get removed at some point.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
[trini: add select FS_FAT for CMD_FAT and SPL_FAT_SUPPORT]
Signed-off-by: Tom Rini <trini@konsulko.com>
Paul Burton [Sun, 30 Apr 2017 19:57:08 +0000 (21:57 +0200)]
net: pch_gbe: Add cache maintenance
On MIPS systems DMA isn't coherent with the CPU caches unless an IOCU is
present. When there is no IOCU we need to writeback or invalidate the
data caches at appropriate points. Perform this cache maintenance in
the pch_gbe driver which is used on the MIPS Boston development board.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Paul Burton [Sun, 30 Apr 2017 19:57:07 +0000 (21:57 +0200)]
net: pch_gbe: CPU accessible addresses are virtual
Use the virt_to_bus & bus_to_virt functions rather than phys_to_bus &
bus_to_phys, since the addresses accessed by the CPU will be virtual
rather than physical. On MIPS physical & virtual addresses differ as we
use virtual addresses in kseg0, and attempting to use physical addresses
directly caused problems as they're in the user segment which would be
mapped via the uninitialised TLB.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Paul Burton [Sun, 30 Apr 2017 19:57:06 +0000 (21:57 +0200)]
net: pch_gbe: Fix rx descriptor buffer addresses
The loop to set up buffer addresses in rx descriptors always operated on
descriptor 0, rather than on each descriptor sequentially. Fix this in
order to setup correct buffer addresses for each descriptor.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Paul Burton [Sun, 30 Apr 2017 19:57:05 +0000 (21:57 +0200)]
net: pch_gbe: Reset during probe
Using the EG20T gigabit ethernet controller on the MIPS Boston board, we
find that we have to reset the controller in order for the RGMII link to
the PHY to become functional. Without doing so we constantly time out in
pch_gbe_mdio_ready.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Siva Durga Prasad Paladugu [Tue, 30 May 2017 12:28:40 +0000 (14:28 +0200)]
net: zynq_gem: Dont flush dummy descriptors
Dont flush dummy descriptors as they are already
allocated from a region with dcache off. Tested
this on Zynq(zc702) and ZynqMP(zcu102) boards.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Siva Durga Prasad Paladugu [Tue, 30 May 2017 12:28:39 +0000 (14:28 +0200)]
net: zynq_gem: Use wait_for_bit with non breakable
Use wait_for_bit to be non breakable as using it with
breakable causes issue of un interruptible auto negotiation.
This is due to the ctrlc pressed will taken for wait_for_bit()
abort during phy_read() and hence not coming out of
auto negotiation.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Phil Edworthy [Wed, 24 May 2017 13:43:06 +0000 (14:43 +0100)]
net: phy: marvell 88e151x: Fix handling of RGMII interface types
The 88E1518 code is programming the wrong registers for rgmii-id,
rgmii-txid and rgmii-rxid interfaces.
Since the PHY defaults to rgmii-id, it would appear that the code
was previously only used with sgmii and rgmii-id interfaces.
Tested on 88E1512 PHY in rgmii-id mode which is from the same family
as 88E1518.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
xypron.glpk@gmx.de [Tue, 16 May 2017 03:07:01 +0000 (05:07 +0200)]
net: core: avoid possible NULL pointer dereference
Checking if dev is NULL after dereferencing it does not make sense.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Sekhar Nori [Mon, 8 May 2017 15:19:56 +0000 (20:49 +0530)]
drivers: net: cpsw: abort init() on aneg timeout
Abort CPSW driver init when auto-negotiation of link
times out. Currently, the code ignores return status
of phy_startup(), and goes ahead with network operation
(like DHCP) even though the link may be down.
Instead, abort init process if link is down or if there
is another error, so phy_startup() can easily be retried
again. This also helps quick fallback to next network interface
(like USB RNDIS) without inordinate delay.
Tested on AM571x IDK and AM335x BeagleBone black.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Wenyou Yang [Thu, 20 Apr 2017 03:13:13 +0000 (11:13 +0800)]
net: macb: Fix GMAC not work when enable DM_ETH
Always search the PHY to determine the macb->phy_addr before using
the PHY to fix "No PHY present" error.
Fix the wrong test of the GMAC's phy interface mode, it should be
PHY_INTERFACE_MODE_RGMII.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Stefan Chulski [Thu, 6 Apr 2017 13:39:08 +0000 (15:39 +0200)]
net: mvpp2.c: Enable 10G support for port 0 (SFI)
This patch fixes some remaining issues in the mvpp2 driver for the 10GB
support on port 0. These changes are:
- Incorrect PCS configuration
- Skip PHY configuration when no PHY is connected
- Skip GMAC configurations if 10G SFI mode set
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Kostya Porotchkin <kostap@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Madalin Bucur [Mon, 3 Apr 2017 14:43:56 +0000 (17:43 +0300)]
armv8/ls1046a: RGMII PHY requires internal delay on Tx
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Madalin Bucur [Mon, 3 Apr 2017 14:43:55 +0000 (17:43 +0300)]
armv8/ls1043a: RGMII PHY requires internal delay on Tx
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Olliver Schinagl [Mon, 3 Apr 2017 14:18:53 +0000 (16:18 +0200)]
net: zynq_gem: Do not return -ENOSYS on success
The .read_rom_hwaddr net_ops hook does not check the return value, which
is why it was never caught that we are currently returning 0 if the
read_rom_hwaddr function return -ENOSYS and -ENOSYS otherwise.
In this case we can simplify this by just returning the result of the
function.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Jacob Chen [Mon, 27 Mar 2017 08:54:17 +0000 (16:54 +0800)]
net: designware: Add phy supply support
Some board need a regulator for gmac phy, so add this code to handle it.
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Philipp Tomsich [Sun, 26 Mar 2017 16:50:23 +0000 (18:50 +0200)]
net: Kconfig:make PHY_GIGE and individual Micrel PHYs selectable
This change migrate the following configuration options for Kconfig:
* PHY_GIGE, indicates that a controller (with an appropriate PHY) is
Gigabit capable and enables extra support in the miiutil for
parsing the status of Gigabit PHYs
* adds configuration options for Micrel KSZ9021 and KSZ9031 GbE PHYs,
which previously had to enabled through a board-specific config file
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Simon Glass [Sat, 27 May 2017 13:38:30 +0000 (07:38 -0600)]
fdt: Drop fdt_select.py
This file was used to select between the normal and fallback libfdt
implementations. Now that we only have one, it is not needed.
Drop it and fix up all users.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 27 May 2017 13:38:29 +0000 (07:38 -0600)]
binman: Rename fdt variable to dtb
Since fdt is the name of a module, use a different name for variables to
avoid a conflict.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 27 May 2017 13:38:28 +0000 (07:38 -0600)]
fdt: Merge fdt_normal with its base class
Since we only have one Fdt implementation now we don't need to have a base
class. Merge the implementation and the base class together.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 27 May 2017 13:38:27 +0000 (07:38 -0600)]
binman: Drop a special case related to fdt_fallback
Previously we were sometimes forced to collate x86 microcode due to not
having access to the offset of each individual piece. Now that we never
use fdt_fallback, we don't have this problem. Drop this special case from
the code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 27 May 2017 13:38:26 +0000 (07:38 -0600)]
fdt: Drop fdt_fallback library
Drop this now-unused library and associated tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 27 May 2017 13:38:25 +0000 (07:38 -0600)]
fdt: Drop use of the legacy libfdt python module
Now that this is no-longer available, stop looking for it. The new module
will be used if available.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 27 May 2017 13:38:24 +0000 (07:38 -0600)]
fdt: Stop building the old python libfdt module
This is no-longer needed, so stop building it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 27 May 2017 13:38:23 +0000 (07:38 -0600)]
fdt: Makefile: Build python libfdt library if needed
This is needed by binman and dtoc, so if those are being used, check that
the library is present and complain if not. Make sure that any error
appears on stderr so that buildman notices it.
This means that the fallback library (which uses fdtget) will not be used
anymore and swig will need to be installed to use binman / dtoc.
This affects any board which uses binman (currently sunxi and x86) or dtoc
(anything that uses CONFIG_SPL_OF_PLATDATA, currently some rockchip
boards).
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 27 May 2017 13:38:22 +0000 (07:38 -0600)]
fdt: Support use of the new python libfdt library
Use the new library if available, while retaining backwards compatibility
with the old library for now.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 27 May 2017 13:38:21 +0000 (07:38 -0600)]
fdt: dtoc: Add a full set of property tests
The tests don't currently cover all the different property types. Add a
new test which checks each property type in turn, to make sure each has
the correct type and value.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 27 May 2017 13:38:20 +0000 (07:38 -0600)]
fdt: Update fdt_test to use 'dt' instead of 'fdt'
Since fdt is a module it conflicts with this variable name and prevents it
being used in tests. Rename the variable.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 27 May 2017 13:38:19 +0000 (07:38 -0600)]
fdt: Build the new python libfdt module
Build the upstream python libfdt module. At present the legacy module is
still built and is the one that it used. Future work will switch this
over.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 27 May 2017 13:38:18 +0000 (07:38 -0600)]
fdt: Rename existing python libfdt module
Now that this module has been accepted upstream we should stop using the
local U-Boot one. In preparation for this, rename it to indicate it is for
legacy use.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 27 May 2017 13:38:17 +0000 (07:38 -0600)]
fdt: Add all source files to the libfdt build
At present only a subset of source files are build. Add the rest and
refactor this so that a source file list is available also. This will be
used in later commit.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 27 May 2017 13:38:16 +0000 (07:38 -0600)]
fdt: Allow swig options to be provided by Makefile
U-Boot needs to provide some swig include directories. Add this feature.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 27 May 2017 13:38:15 +0000 (07:38 -0600)]
fdt: Move header files into lib/libfdt
These header files are actually part of libfdt. Move them there to make
it easier to build pylibfdt and easier to merge changes from upstream.
Update the license header to use SPDX at the same time.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 27 May 2017 13:38:14 +0000 (07:38 -0600)]
fdt: Use SPDX format for licenses in the libfdt headers
These should follow the UBoot standard. Update them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 27 May 2017 13:38:13 +0000 (07:38 -0600)]
fdt: Correct cast for sandbox in fdtdec_setup_memory_size()
This gives a warning with some native compilers:
lib/fdtdec.c:1203:8: warning: format ‘%llx’ expects argument of type
‘long long unsigned int’, but argument 3 has type
‘long unsigned int’ [-Wformat=]
Fix it with a cast.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 27 May 2017 13:38:12 +0000 (07:38 -0600)]
pci: Correct cast for sandbox
This gives a warning with some native compilers:
cmd/pci.c:152:11: warning: format ‘%llx’ expects argument of type
‘long long unsigned int’, but argument 3 has type
‘u64 {aka long unsigned int}’ [-Wformat=]
Fix it with a cast.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 27 May 2017 13:38:11 +0000 (07:38 -0600)]
fdt: Add Python bindings
An early version of this is available upstream. Bring it in as a starting
point. This is from dtc upstream commit e56f2b0.
Future work will plumb it into dtoc and remove the now-unnecessary local
libraries.
Signed-off-by: Simon Glass <sjg@chromium.org>
Jagan Teki [Wed, 24 May 2017 19:18:08 +0000 (19:18 +0000)]
sun50i: h5: Add initial Orangepi Prime support
Orangepi Prime is an open-source single-board computer
using the Allwinner h5 SOC.
H5 Orangepi Prime has
- Quad-core Cortex-A53
- 2GB DDR3
- Debug TTL UART
- 1000M/100M Ethernet RJ45
- Three USB 2.0
- HDMI
- Audio and MIC
- Wifi + BT
- IR receiver
- HDMI
- Wifi + BT
Boot from MMC:
-------------
U-Boot SPL 2017.05-00662-ga3f4c05-dirty (May 25 2017 - 13:30:14)
DRAM: 2048 MiB
Trying to boot from MMC1
NOTICE: BL3-1: Running on H5 (1718) in SRAM A2 (@0x44000)
NOTICE: Configuring SPC Controller
NOTICE: BL3-1: v1.0(debug):aa75c8d
NOTICE: BL3-1: Built : 18:28:27, May 24 2017
INFO: BL3-1: Initializing runtime services
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9
U-Boot 2017.05-00662-ga3f4c05-dirty (May 25 2017 - 13:30:14 +0000) Allwinner Technology
CPU: Allwinner H5 (SUN50I)
Model: OrangePi Prime
DRAM: 2 GiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: phy interface7
eth0: ethernet@1c30000
starting USB...
USB0: USB EHCI 1.00
USB1: USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
York Sun [Mon, 15 May 2017 15:52:03 +0000 (08:52 -0700)]
armv8: ls1046ardb: Enable loading PPA during SPL stage for SD boot
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Mon, 15 May 2017 15:52:02 +0000 (08:52 -0700)]
armv8: ls1046a: Enable spl_board_init() function
CONFIG_SPL_BOARD_INIT is used for SPL boot. It is only enabled for
secure boot at this moment. Enable it in defconfig files for SPL
build.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Mon, 15 May 2017 15:52:01 +0000 (08:52 -0700)]
armv8: ls1043ardb: Enable loading PPA during SPL stage for SD boot
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Mon, 15 May 2017 15:52:00 +0000 (08:52 -0700)]
armv8: layerscape: Enabling loading PPA during SPL stage
Loading PPA in SPL puts the rest of U-Boot (including RAM version
loaded later) in EL2 with MMU and cache enabled. Once PPA is loaded,
PSCI is available.
Signed-off-by: York Sun <york.sun@nxp.com>
York Sun [Mon, 15 May 2017 15:51:59 +0000 (08:51 -0700)]
armv8: layerscape: Make U-Boot EL2 safe
When U-Boot boots from EL2, skip some lowlevel init code requiring
EL3, including CCI-400/CCN-504, trust zone, GIC, etc. These
initialization tasks are carried out before U-Boot runs. This applies
to the RAM version image used for SPL boot if PPA is loaded first.
Signed-off-by: York Sun <york.sun@nxp.com>
Santan Kumar [Fri, 5 May 2017 10:12:29 +0000 (15:42 +0530)]
armv8: ls2080aqds: Add support for SD boot
Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Santan Kumar [Fri, 5 May 2017 10:12:28 +0000 (15:42 +0530)]
armv8: ls2080a: Reorganise NAND_BOOT code in config flag
Add CONFIG_NAND_BOOT config flag to organise
NAND_BOOT specific code in config flag like
-nand-boot specfic errata errata_rcw_src()
-CONFIG_SYS_NAND_U_BOOT_DST,etc
Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Zhao Qiang [Thu, 25 May 2017 01:47:40 +0000 (09:47 +0800)]
QE: add QE support on SD boot
modify u_qe_init to upload QE firmware from SD card when it is SD
boot
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Bogdan Purcareata [Wed, 24 May 2017 16:40:22 +0000 (16:40 +0000)]
drivers: net: fsl-mc: Include MAC addr fixup to DPL
Previous to MC v10.x, port mac address was specified via DPL. Since
newer MC versions are compatible with old style DPLs, make the u-boot
env mac addresses visible there. This applies only to DPLs that have
an older version.
DPLs use 32 bit values for specifying MAC addresses. U-boot
environment variables take precedence over the MAC addresses already
visible in the DPL/DPC.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Signed-off-by: Heinz Wrobel <heinz.wrobel@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Bogdan Purcareata [Wed, 24 May 2017 16:40:21 +0000 (16:40 +0000)]
drivers: net: fsl-mc: Link MC boot to PHY_RESET_R
DPAA2 platforms boot the Management Complex based on the u-boot env
variable "mcinitcmd". Instead of doing this step on each platform
individually, define a single mc_env_boot function in the MC driver,
since it's semantically tied to it.
Call the function in a per-board reset_phy hook, as it gets called at a
later moment, when all board PHY devices have been initialized.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Signed-off-by: Heinz Wrobel <heinz.wrobel@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Jagan Teki [Thu, 25 May 2017 18:26:41 +0000 (18:26 +0000)]
arm64: dts: sun50i: h5: orangepi-pc2: Use GPIO flag binding macro
Instead of defining numerical value on GPIO flag
better to use existing binding macro.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Thu, 25 May 2017 18:15:36 +0000 (18:15 +0000)]
arm64: dts: sun50i: Add sun50i-h5.dtsi
The Allwinner H5 SoC is pin-compatible to the H3 SoC,
but uses Cortex-A53 cores instead.
So move the shared cpu based and peripherals nodes into
sun50i-h5.dtsi so, that it can shared among the sun50i-h5
board dts files.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Simon Glass [Fri, 19 May 2017 02:10:02 +0000 (20:10 -0600)]
sandbox: Move to use live tree
This updates sandbox to use a live device tree. This means that after
relocation (from board_init_r() onwards) it no-longer uses flat device
tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:10:01 +0000 (20:10 -0600)]
dm: gpio: power: Convert pm8916 drivers to livetree
This PMIC driver (power and GPIO) is used by the sandbox SPMI tests.
Update the drivers to support a live device tree so that the tests pass.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:10:00 +0000 (20:10 -0600)]
dm: test: Fix nit with position of backslash
Line up this backslash with all the others.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:59 +0000 (20:09 -0600)]
dm: sandbox: sysreset: Convert driver to livetree
Update this driver to support a live device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:58 +0000 (20:09 -0600)]
dm: sandbox: spi: Convert driver to support livetree
Update this driver to support a live device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:57 +0000 (20:09 -0600)]
dm: spi-flash: Convert uclass to livetree
Update the SPI flash uclass to support a live device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:56 +0000 (20:09 -0600)]
dm: sandbox: i2c_rtc: Drop fdtdec.h header
This is not needed in this driver. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:55 +0000 (20:09 -0600)]
dm: sandbox: i2c: Drop fdtdec.h header
This is not needed in this driver. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:54 +0000 (20:09 -0600)]
dm: spi: Convert uclass to livetree
Update the SPI uclass to support a live device tree. Also adjust
spi_slave_ofdata_to_platdata() to accept a device instead of a blob and
offset.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:53 +0000 (20:09 -0600)]
cros_ec: Update the cros_ec keyboard driver to livetree
Update this driver and key_matrix to support a live device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:52 +0000 (20:09 -0600)]
dm: Update the I2C eeprom driver for livetree
Update this driver so that it works with livetree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:51 +0000 (20:09 -0600)]
dm: pci: Update uclass to support livetree
Update the PCI uclass to support livetree. This mostly involves fixing
the address decoding from the device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:50 +0000 (20:09 -0600)]
dm: reset: Update uclass to support livetree
Update the reset domain uclass to support livetree. Fix the xlate() method
which has no callers.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:49 +0000 (20:09 -0600)]
dm: power-domain: Update uclass to support livetree
Update the power domain uclass to support livetree. Fix the xlate() method
which has no callers.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:48 +0000 (20:09 -0600)]
sandbox: phy: Update driver for livetree
Update the sandbox phy driver to support livetree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:47 +0000 (20:09 -0600)]
dm: phy: Update uclass to support livetree
Update the phy uclass to support livetree. Fix the xlate() method
which has no callers.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:46 +0000 (20:09 -0600)]
dm: mailbox: Update uclass to support livetree
Update the mailbox uclass to support livetree. Fix the xlate() method
in all callers.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:45 +0000 (20:09 -0600)]
dm: phy: Update tests to use ut_asserteq()
Use ut_asserteq() to test equality since this gives a better error message
on failure. Also make a few of the tests more specific.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:44 +0000 (20:09 -0600)]
dm: test: Disable the fdt_offset test with livetree
We cannot run this test with livetree since it uses device tree offsets.
Mark it as flat tree only.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:43 +0000 (20:09 -0600)]
dm: test: Separate out the bus DT offset test
We cannot access the device tree via an offset when running in livetree
mode. Separate out that part of the bus' children tests and mark it as
for the flat tree only.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:42 +0000 (20:09 -0600)]
dm: clk: fixed: Update to support livetree
Update the fixed-rate clock driver to support a live device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 31 May 2017 03:47:29 +0000 (21:47 -0600)]
dm: clk: Update uclass to support livetree
Update the clk uclass to support a live device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:40 +0000 (20:09 -0600)]
clk: Modify xlate() method for livetree
Update the xlate() method to use ofnode_phandle_args instead of the fdtdec
variant. This will allow drivers to support a live device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:39 +0000 (20:09 -0600)]
sandbox: usb: Convert emulators to livetree
Update the sandbox flash and hub USB emulators to support a live device
tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:38 +0000 (20:09 -0600)]
dm: usb: Convert uclass to livetree
Update the usb uclass to support a live device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:37 +0000 (20:09 -0600)]
dm: adc: Convert uclass to livetree
Update the adc uclass to support a live device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:36 +0000 (20:09 -0600)]
dm: mmc: Convert uclass to livetree
Update the mmc uclass to support a live device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:35 +0000 (20:09 -0600)]
dm: regulator: Update fixed regulator to support livetree.
Update this driver to support a live device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:34 +0000 (20:09 -0600)]
dm: regulator: Convert regulator uclass to support livetree
Update the regulator uclass to support a live device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:33 +0000 (20:09 -0600)]
sandbox: pmic: Convert pmic emulator to support livetree
Update this driver to support a live device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:32 +0000 (20:09 -0600)]
dm: pmic: Convert uclass to livetree
Update the pmic uclass and all pmics to support a live device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:31 +0000 (20:09 -0600)]
samsung: Move pmic header out of config file
We should not be including a PMIC header file in the board config. Move it
to a C file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:30 +0000 (20:09 -0600)]
dm: i2c: Convert uclass to livetree
Update the i2c uclass to support a live device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:29 +0000 (20:09 -0600)]
string: Add strcspn()
Add an implementation of strcspn() which returns the number of initial
characters that do not match any in a rejection list.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:28 +0000 (20:09 -0600)]
string: Add strchrnul()
This functions works like strchr() but returns the end of the string if
the character is not found. Add an implementation of this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:27 +0000 (20:09 -0600)]
dm: Add more livetree helpers and definitions
Add some definitions and helpers for livetree in the main of.h header
file. These include:
- reading multi-cell integers
- default number of address/size cells
- functions for comparing names
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:26 +0000 (20:09 -0600)]
fdt: Rename a few functions in fdt_support
These two functions have an of_ prefix which conflicts with naming used
in of_addr. Rename them:
fdt_read_number
fdt_support_bus_default_count_cells
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:25 +0000 (20:09 -0600)]
test: Update 'make test' to run more tests
The standard sandbox board cannot run the of-platdata test since it needs
SPL. Also, we should test the flat tree version of sandbox.
Add these tests to the default test script.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:24 +0000 (20:09 -0600)]
sandbox: Add a new sandbox_flattree board
Add a sandbox board to test the non-livetree build (i.e. with
CONFIG_OF_FLAT disabled). This increases our build and test coverage.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:23 +0000 (20:09 -0600)]
cros_ec: Convert to support live tree
Convert this driver to support the live device tree and remove the old
fdtdec support.
The keyboard is not yet converted.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 19 May 2017 02:09:22 +0000 (20:09 -0600)]
cros_ec: Fix debug() statement in ec_command_inptr()
This prints out the wrong pointers. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>