ASoC: wm8731: Disable the regulator when probing fails

[ Upstream commit 92ccbf17eeacf510cf1eed9c252d9332ca24f02d ]

When the driver fails during probing, the driver should disable the
regulator, not just handle it in wm8731_hw_init().

The following log reveals it:

[   17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[   17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0
[   17.824467] Call Trace:
[   17.824774]  <TASK>
[   17.825040]  regulator_bulk_free+0x82/0xe0
[   17.825514]  devres_release_group+0x319/0x3d0
[   17.825882]  i2c_device_probe+0x766/0x940
[   17.829198]  i2c_register_driver+0xb5/0x130

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220405121038.4094051-1-zheyuma97@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: soc-acpi: correct device endpoints for max98373

[ Upstream commit 97326be14df7bacc6ba5c62c0556298c27ea0432 ]

The left speaker of max98373 uses spk_r_endpoint, and right
speaker uses spk_l_endpoint, this is obviously wrong.

This patch corrects the endpoints for max98373 codec.

Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220406192341.271465-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: fix F-RTO may not work correctly when receiving DSACK

[ Upstream commit d9157f6806d1499e173770df1f1b234763de5c79 ]

Currently DSACK is regarded as a dupack, which may cause
F-RTO to incorrectly enter "loss was real" when receiving
DSACK.

Packetdrill to demonstrate:

// Enable F-RTO and TLP
    0 `sysctl -q net.ipv4.tcp_frto=2`
    0 `sysctl -q net.ipv4.tcp_early_retrans=3`
    0 `sysctl -q net.ipv4.tcp_congestion_control=cubic`

// Establish a connection
   +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
   +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
   +0 bind(3, ..., ...) = 0
   +0 listen(3, 1) = 0

// RTT 10ms, RTO 210ms
  +.1 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
   +0 > S. 0:0(0) ack 1 <...>
 +.01 < . 1:1(0) ack 1 win 257
   +0 accept(3, ..., ...) = 4

// Send 2 data segments
   +0 write(4, ..., 2000) = 2000
   +0 > P. 1:2001(2000) ack 1

// TLP
+.022 > P. 1001:2001(1000) ack 1

// Continue to send 8 data segments
   +0 write(4, ..., 10000) = 10000
   +0 > P. 2001:10001(8000) ack 1

// RTO
+.188 > . 1:1001(1000) ack 1

// The original data is acked and new data is sent(F-RTO step 2.b)
   +0 < . 1:1(0) ack 2001 win 257
   +0 > P. 10001:12001(2000) ack 1

// D-SACK caused by TLP is regarded as a dupack, this results in
// the incorrect judgment of "loss was real"(F-RTO step 3.a)
+.022 < . 1:1(0) ack 2001 win 257 <sack 1001:2001,nop,nop>

// Never-retransmitted data(3001:4001) are acked and
// expect to switch to open state(F-RTO step 3.b)
   +0 < . 1:1(0) ack 4001 win 257
+0 %{ assert tcpi_ca_state == 0, tcpi_ca_state }%

Fixes: e33099f96d99 ("tcp: implement RFC5682 F-RTO")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1650967419-2150-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"

[ Upstream commit aeaf59b78712c7a1827c76f086acff4f586e072f ]

This reverts commit 723ad916134784b317b72f3f6cf0f7ba774e5dae

When client requests channel or ring size larger than what the server
can support the server will cap the request to the supported max. So,
the client would not be able to successfully request resources that
exceed the server limit.

Fixes: 723ad9161347 ("ibmvnic: Add ethtool private flag for driver-defined queue limits")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Link: https://lore.kernel.org/r/20220427235146.23189-1-drt@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: ensure IPsec VF<->PF compatibility

[ Upstream commit f049efc7f7cd2f3c419f55040928eaefb13b3636 ]

The VF driver can forward any IPsec flags and such makes the function
is not extendable and prone to backward/forward incompatibility.

If new software runs on VF, it won't know that PF configured something
completely different as it "knows" only XFRM_OFFLOAD_INBOUND flag.

Fixes: eda0333ac293 ("ixgbe: add VF IPsec management")
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220427173152.443102-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf arm-spe: Fix addresses of synthesized SPE events

[ Upstream commit 4e13f6706d5aee1a6b835a44f6cf4971a921dcb8 ]

This patch corrects a bug whereby synthesized events from SPE
samples are missing virtual addresses.

Fixes: 54f7815efef7fad9 ("perf arm-spe: Fill address info for samples")
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Song Liu <songliubraving@fb.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220421165205.117662-2-timothy.hayes@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: No short reads or writes upon glock contention

[ Upstream commit 296abc0d91d8b65d42224dd33452ace14491ad08 ]

Commit 00bfe02f4796 ("gfs2: Fix mmap + page fault deadlocks for buffered
I/O") changed gfs2_file_read_iter() and gfs2_file_buffered_write() to
allow dropping the inode glock while faulting in user buffers.  When the
lock was dropped, a short result was returned to indicate that the
operation was interrupted.

As pointed out by Linus (see the link below), this behavior is broken
and the operations should always re-acquire the inode glock and resume
the operation instead.

Link: https://lore.kernel.org/lkml/CAHk-=whaz-g_nOOoo8RRiWNjnv2R+h6_xk2F1J4TuSRxk1MtLw@mail.gmail.com/
Fixes: 00bfe02f4796 ("gfs2: Fix mmap + page fault deadlocks for buffered I/O")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Make sure not to return short direct writes

[ Upstream commit 3bde4c48586074202044456285a97ccdf9048988 ]

When direct writes fail with -ENOTBLK because we're writing into a
hole (gfs2_iomap_begin()) or because of a page invalidation failure
(iomap_dio_rw()), we're falling back to buffered writes.  In that case,
when we lose the inode glock in gfs2_file_buffered_write(), we want to
re-acquire it instead of returning a short write.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Minor retry logic cleanup

[ Upstream commit 124c458a401a2497f796e4f2d6cafac6edbea8e9 ]

Clean up the retry logic in the read and write functions somewhat.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Prevent endless loops in gfs2_file_buffered_write

[ Upstream commit 554c577cee95bdc1d03d9f457e57dc96eb791845 ]

Currently, instead of performing a short write,
iomap_file_buffered_write will fail when part of its iov iterator cannot
be read.  In contrast, gfs2_file_buffered_write will loop around if it
can read part of the iov iterator, so we can end up in an endless loop.

This should be fixed in iomap_file_buffered_write (and also
generic_perform_write), but this comes a bit late in the 5.16
development cycle, so work around it in the filesystem by
trimming the iov iterator to the known-good size for now.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fec: add missing of_node_put() in fec_enet_init_stop_mode()

[ Upstream commit d2b52ec056d5bddb055c8f21d7489a23548d0838 ]

Put device node in error path in fec_enet_init_stop_mode().

Fixes: 8a448bf832af ("net: ethernet: fec: move GPR register offset and bit into DT")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220426125231.375688-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnx2x: fix napi API usage sequence

[ Upstream commit af68656d66eda219b7f55ce8313a1da0312c79e1 ]

While handling PCI errors (AER flow) driver tries to
disable NAPI [napi_disable()] after NAPI is deleted
[__netif_napi_del()] which causes unexpected system
hang/crash.

System message log shows the following:
=======================================
[ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures.
[ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)'
[ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
bnx2x->error_detected(IO frozen)
[ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports:
'need reset'
[ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking
bnx2x->error_detected(IO frozen)
[ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports:
'need reset'
[ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset'
[ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow:
[ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows:
[ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow:
[ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows:
[ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset'
[ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
bnx2x->slot_reset()
[ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing...
[ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset
--> driver unload

Uninterruptible tasks
=====================
crash> ps | grep UN
     213      2  11  c000000004c89e00  UN   0.0       0      0  [eehd]
     215      2   0  c000000004c80000  UN   0.0       0      0
[kworker/0:2]
    2196      1  28  c000000004504f00  UN   0.1   15936  11136  wickedd
    4287      1   9  c00000020d076800  UN   0.0    4032   3008  agetty
    4289      1  20  c00000020d056680  UN   0.0    7232   3840  agetty
   32423      2  26  c00000020038c580  UN   0.0       0      0
[kworker/26:3]
   32871   4241  27  c0000002609ddd00  UN   0.1   18624  11648  sshd
   32920  10130  16  c00000027284a100  UN   0.1   48512  12608  sendmail
   33092  32987   0  c000000205218b00  UN   0.1   48512  12608  sendmail
   33154   4567  16  c000000260e51780  UN   0.1   48832  12864  pickup
   33209   4241  36  c000000270cb6500  UN   0.1   18624  11712  sshd
   33473  33283   0  c000000205211480  UN   0.1   48512  12672  sendmail
   33531   4241  37  c00000023c902780  UN   0.1   18624  11648  sshd

EEH handler hung while bnx2x sleeping and holding RTNL lock
===========================================================
crash> bt 213
PID: 213    TASK: c000000004c89e00  CPU: 11  COMMAND: "eehd"
  #0 [c000000004d477e0] __schedule at c000000000c70808
  #1 [c000000004d478b0] schedule at c000000000c70ee0
  #2 [c000000004d478e0] schedule_timeout at c000000000c76dec
  #3 [c000000004d479c0] msleep at c0000000002120cc
  #4 [c000000004d479f0] napi_disable at c000000000a06448
                                        ^^^^^^^^^^^^^^^^
  #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x]
  #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x]
  #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc
  #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8
  #9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64

And the sleeping source code
============================
crash> dis -ls c000000000a06448
FILE: ../net/core/dev.c
LINE: 6702

   6697  {
   6698          might_sleep();
   6699          set_bit(NAPI_STATE_DISABLE, &n->state);
   6700
   6701          while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
* 6702                  msleep(1);
   6703          while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state))
   6704                  msleep(1);
   6705
   6706          hrtimer_cancel(&n->timer);
   6707
   6708          clear_bit(NAPI_STATE_DISABLE, &n->state);
   6709  }

EEH calls into bnx2x twice based on the system log above, first through
bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes
the following call chains:

bnx2x_io_error_detected()
  +-> bnx2x_eeh_nic_unload()
       +-> bnx2x_del_all_napi()
            +-> __netif_napi_del()

bnx2x_io_slot_reset()
  +-> bnx2x_netif_stop()
       +-> bnx2x_napi_disable()
            +->napi_disable()

Fix this by correcting the sequence of NAPI APIs usage,
that is delete the NAPI after disabling it.

Fixes: 7fa6f34081f1 ("bnx2x: AER revised")
Reported-by: David Christensen <drc@linux.vnet.ibm.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tls: Skip tls_append_frag on zero copy size

[ Upstream commit a0df71948e9548de819a6f1da68f5f1742258a52 ]

Calling tls_append_frag when max_open_record_len == record->len might
add an empty fragment to the TLS record if the call happens to be on the
page boundary. Normally tls_append_frag coalesces the zero-sized
fragment to the previous one, but not if it's on page boundary.

If a resync happens then, the mlx5 driver posts dump WQEs in
tx_post_resync_dump, and the empty fragment may become a data segment
with byte_count == 0, which will confuse the NIC and lead to a CQE
error.

This commit fixes the described issue by skipping tls_append_frag on
zero size to avoid adding empty fragments. The fix is not in the driver,
because an empty fragment is hardly the desired behavior.

Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220426154949.159055-1-maximmi@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix memory leak in dcn21_clock_source_create

[ Upstream commit 65e54987508b6f0771f56bdfa3ee1926d52785ae ]

When dcn20_clk_src_construct() fails, we need to release clk_src.

Fixes: 6f4e6361c3ff ("drm/amd/display: Add Renoir resource (v2)")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix GWS queue count

[ Upstream commit 7c6b6e18c890f30965b0589b0a57645e1dbccfde ]

dqm->gws_queue_count and pdd->qpd.mapped_gws_queue need to be updated
each time the queue gets evicted.

Fixes: b8020b0304c8 ("drm/amdkfd: Enable over-subscription with >1 GWS queue")
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: conntrack: fix udp offload timeout sysctl

[ Upstream commit 626873c446f7559d5af8b48cefad903ffd85cf4e ]

`nf_flowtable_udp_timeout` sysctl option is available only
if CONFIG_NFT_FLOW_OFFLOAD enabled. But infra for this flow
offload UDP timeout was added under CONFIG_NF_FLOW_TABLE
config option. So, if you have CONFIG_NFT_FLOW_OFFLOAD
disabled and CONFIG_NF_FLOW_TABLE enabled, the
`nf_flowtable_udp_timeout` is not present in sysfs.
Please note, that TCP flow offload timeout sysctl option
is present even CONFIG_NFT_FLOW_OFFLOAD is disabled.

I suppose it was a typo in commit that adds UDP flow offload
timeout and CONFIG_NF_FLOW_TABLE should be used instead.

Fixes: 975c57504da1 ("netfilter: conntrack: Introduce udp offload timeout configuration")
Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: check reserved fields for recv/recvmsg

[ Upstream commit 5a1e99b61b0c81388cde0c808b3e4173907df19f ]

We should check unused fields for non-zero and -EINVAL if they are set,
making it consistent with other opcodes.

Fixes: aa1fa28fc73e ("io_uring: add support for recvmsg()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: check reserved fields for send/sendmsg

[ Upstream commit 588faa1ea5eecb351100ee5d187b9be99210f70d ]

We should check unused fields for non-zero and -EINVAL if they are set,
making it consistent with other opcodes.

Fixes: 0fa03c624d8f ("io_uring: add support for sendmsg()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK

[ Upstream commit 71cffebf6358a7f5031f5b208bbdc1cb4db6e539 ]

Commit 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining
GSWIP_MII_CFG bits") added all known bits in the GSWIP_MII_CFGp
register. It helped bring this register into a well-defined state so the
driver has to rely less on the bootloader to do things right.
Unfortunately it also sets the GSWIP_MII_CFG_RMII_CLK bit without any
possibility to configure it. Upon further testing it turns out that all
boards which are supported by the GSWIP driver in OpenWrt which use an
RMII PHY have a dedicated oscillator on the board which provides the
50MHz RMII reference clock.

Don't set the GSWIP_MII_CFG_RMII_CLK bit (but keep the code which always
clears it) to fix support for the Fritz!Box 7362 SL in OpenWrt. This is
a board with two Atheros AR8030 RMII PHYs. With the "RMII clock" bit set
the MAC also generates the RMII reference clock whose signal then
conflicts with the signal from the oscillator on the board. This results
in a constant cycle of the PHY detecting link up/down (and as a result
of that: the two ports using the AR8030 PHYs are not working).

At the time of writing this patch there's no known board where the MAC
(GSWIP) has to generate the RMII reference clock. If needed this can be
implemented in future by providing a device-tree flag so the
GSWIP_MII_CFG_RMII_CLK bit can be toggled per port.

Fixes: 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits")
Tested-by: Jan Hoffmann <jan@3e8.eu>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://lore.kernel.org/r/20220425152027.2220750-1-martin.blumenstingl@googlemail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/sun4i: Remove obsolete references to PHYS_OFFSET

[ Upstream commit dc3ae06c5f2170d879ff58696f629d8c3868aec3 ]

commit b4bdc4fbf8d0 ("soc: sunxi: Deal with the MBUS DMA offsets in a
central place") added a platform device notifier that sets the DMA
offset for all of the display engine frontend and backend devices.

The code applying the offset to DMA buffer physical addresses was then
removed from the backend driver in commit 756668ba682e ("drm/sun4i:
backend: Remove the MBUS quirks"), but the code subtracting PHYS_OFFSET
was left in the frontend driver.

As a result, the offset was applied twice in the frontend driver. This
likely went unnoticed because it only affects specific configurations
(scaling or certain pixel formats) where the frontend is used, on boards
with both one of these older SoCs and more than 1 GB of DRAM.

In addition, the references to PHYS_OFFSET prevent compiling the driver
on architectures where PHYS_OFFSET is not defined.

Fixes: b4bdc4fbf8d0 ("soc: sunxi: Deal with the MBUS DMA offsets in a central place")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-4-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mv88e6xxx: Fix port_hidden_wait to account for port_base_addr

[ Upstream commit 24cbdb910bb62b5be3865275e5682be1a7708c0f ]

The other port_hidden functions rely on the port_read/port_write
functions to access the hidden control port. These functions apply the
offset for port_base_addr where applicable. Update port_hidden_wait to
use the port_wait_bit so that port_base_addr offsets are accounted for
when waiting for the busy bit to change.

Without the offset the port_hidden_wait function would timeout on
devices that have a non-zero port_base_addr (e.g. MV88E6141), however
devices that have a zero port_base_addr would operate correctly (e.g.
MV88E6390).

Fixes: 609070133aff ("net: dsa: mv88e6xxx: update code operating on hidden registers")
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220425070454.348584-1-nathan@nathanrossi.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: marvell10g: fix return value on error

[ Upstream commit 0ed9704b660b259b54743cad8a84a11148f60f0a ]

Return back the error value that we get from phy_read_mmd().

Fixes: c84786fa8f91 ("net: phy: marvell10g: read copper results from CSSR1")
Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/f47cb031aeae873bb008ba35001607304a171a20.1650868058.git.baruch@tkos.co.il
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bcmgenet: hide status block before TX timestamping

[ Upstream commit acac0541d1d65e81e599ec399d34d184d2424401 ]

The hardware checksum offloading requires use of a transmit
status block inserted before the outgoing frame data, this was
updated in '9a9ba2a4aaaa ("net: bcmgenet: always enable status blocks")'

However, skb_tx_timestamp() assumes that it is passed a raw frame
and PTP parsing chokes on this status block.

Fix this by calling __skb_pull(), which hides the TSB before calling
skb_tx_timestamp(), so an outgoing PTP packet is parsed correctly.

As the data in the skb has already been set up for DMA, and the
dma_unmap_* calls use a separately stored address, there is no
no effective change in the data transmission.

Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220424165307.591145-1-jonathan.lemon@gmail.com
Fixes: d03825fba459 ("net: bcmgenet: add skb_tx_timestamp call")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: qcom-cpufreq-hw: Clear dcvs interrupts

[ Upstream commit e4e6448638a01905faeda9bf96aa9df7c8ef463c ]

It's noted that dcvs interrupts are not self-clearing, thus an interrupt
handler runs constantly, which leads to a severe regression in runtime.
To fix the problem an explicit write to clear interrupt register is
required, note that on OSM platforms the register may not be present.

Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource()

[ Upstream commit f58ca215cda1975f77b2b762903684a3c101bec9 ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Fixes: 7a6fca879f59 ("clk: sunxi: Add driver for A80 MMC config clocks/resets")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220421134308.2885094-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()

[ Upstream commit fff8c10368e64e7f8960f149375c12ca5f3b30af ]

This code is really spurious.
It always returns an ERR_PTR, even when err is known to be 0 and calls
put_device() after a successful device_register() call.

It is likely that the return statement in the normal path is missing.
Add 'return rdev;' to fix it.

Fixes: d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/ef2b9576350bba4c8e05e669e9535e9e2a415763.1650551719.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: make sure treq->af_specific is initialized

[ Upstream commit ba5a4fdd63ae0c575707030db0b634b160baddd7 ]

syzbot complained about a recent change in TCP stack,
hitting a NULL pointer [1]

tcp request sockets have an af_specific pointer, which
was used before the blamed change only for SYNACK generation
in non SYNCOOKIE mode.

tcp requests sockets momentarily created when third packet
coming from client in SYNCOOKIE mode were not using
treq->af_specific.

Make sure this field is populated, in the same way normal
TCP requests sockets do in tcp_conn_request().

[1]
TCP: request_sock_TCPv6: Possible SYN flooding on port 20002. Sending cookies.  Check SNMP counters.
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 3695 Comm: syz-executor864 Not tainted 5.18.0-rc3-syzkaller-00224-g5fd1fe4807f9 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:tcp_create_openreq_child+0xe16/0x16b0 net/ipv4/tcp_minisocks.c:534
Code: 48 c1 ea 03 80 3c 02 00 0f 85 e5 07 00 00 4c 8b b3 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7e 08 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c9 07 00 00 48 8b 3c 24 48 89 de 41 ff 56 08 48
RSP: 0018:ffffc90000de0588 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888076490330 RCX: 0000000000000100
RDX: 0000000000000001 RSI: ffffffff87d67ff0 RDI: 0000000000000008
RBP: ffff88806ee1c7f8 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff87d67f00 R11: 0000000000000000 R12: ffff88806ee1bfc0
R13: ffff88801b0e0368 R14: 0000000000000000 R15: 0000000000000000
FS:  00007f517fe58700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffcead76960 CR3: 000000006f97b000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 tcp_v6_syn_recv_sock+0x199/0x23b0 net/ipv6/tcp_ipv6.c:1267
 tcp_get_cookie_sock+0xc9/0x850 net/ipv4/syncookies.c:207
 cookie_v6_check+0x15c3/0x2340 net/ipv6/syncookies.c:258
 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1131 [inline]
 tcp_v6_do_rcv+0x1148/0x13b0 net/ipv6/tcp_ipv6.c:1486
 tcp_v6_rcv+0x3305/0x3840 net/ipv6/tcp_ipv6.c:1725
 ip6_protocol_deliver_rcu+0x2e9/0x1900 net/ipv6/ip6_input.c:422
 ip6_input_finish+0x14c/0x2c0 net/ipv6/ip6_input.c:464
 NF_HOOK include/linux/netfilter.h:307 [inline]
 NF_HOOK include/linux/netfilter.h:301 [inline]
 ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:473
 dst_input include/net/dst.h:461 [inline]
 ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 NF_HOOK include/linux/netfilter.h:301 [inline]
 ipv6_rcv+0x27f/0x3b0 net/ipv6/ip6_input.c:297
 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5405
 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5519
 process_backlog+0x3a0/0x7c0 net/core/dev.c:5847
 __napi_poll+0xb3/0x6e0 net/core/dev.c:6413
 napi_poll net/core/dev.c:6480 [inline]
 net_rx_action+0x8ec/0xc60 net/core/dev.c:6567
 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558
 invoke_softirq kernel/softirq.c:432 [inline]
 __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637
 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649
 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097

Fixes: 5b0b9e4c2c89 ("tcp: md5: incorrect tcp_header_len for incoming connections")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT

[ Upstream commit 4bfe744ff1644fbc0a991a2677dc874475dd6776 ]

I had this bug sitting for too long in my pile, it is time to fix it.

Thanks to Doug Porter for reminding me of it!

We had various attempts in the past, including commit
0cbe6a8f089e ("tcp: remove SOCK_QUEUE_SHRUNK"),
but the issue is that TCP stack currently only generates
EPOLLOUT from input path, when tp->snd_una has advanced
and skb(s) cleaned from rtx queue.

If a flow has a big RTT, and/or receives SACKs, it is possible
that the notsent part (tp->write_seq - tp->snd_nxt) reaches 0
and no more data can be sent until tp->snd_una finally advances.

What is needed is to also check if POLLOUT needs to be generated
whenever tp->snd_nxt is advanced, from output path.

This bug triggers more often after an idle period, as
we do not receive ACK for at least one RTT. tcp_notsent_lowat
could be a fraction of what CWND and pacing rate would allow to
send during this RTT.

In a followup patch, I will remove the bogus call
to tcp_chrono_stop(sk, TCP_CHRONO_SNDBUF_LIMITED)
from tcp_check_space(). Fact that we have decided to generate
an EPOLLOUT does not mean the application has immediately
refilled the transmit queue. This optimistic call
might have been the reason the bug seemed not too serious.

Tested:

200 ms rtt, 1% packet loss, 32 MB tcp_rmem[2] and tcp_wmem[2]

$ echo 500000 >/proc/sys/net/ipv4/tcp_notsent_lowat
$ cat bench_rr.sh
SUM=0
for i in {1..10}
do
 V=`netperf -H remote_host -l30 -t TCP_RR -- -r 10000000,10000 -o LOCAL_BYTES_SENT | egrep -v "MIGRATED|Bytes"`
 echo $V
 SUM=$(($SUM + $V))
done
echo SUM=$SUM

Before patch:
$ bench_rr.sh
130000000
80000000
140000000
140000000
140000000
140000000
130000000
40000000
90000000
110000000
SUM=1140000000

After patch:
$ bench_rr.sh
430000000
590000000
530000000
450000000
450000000
350000000
450000000
490000000
480000000
460000000
SUM=4680000000  # This is 410 % of the value before patch.

Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Doug Porter <dsp@fb.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md mode

[ Upstream commit 31c417c948d7f6909cb63f0ac3298f3c38f8ce20 ]

As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in
collect_md mode is racy for [IP6]GRE[TAP] devices.  Consider the
following sequence of events:

1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link
   add ... external".  "ip" ignores "[o]seq" if "external" is specified,
   so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e.
   it uses lockless TX);
2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g.
   bpf_skb_set_tunnel_key() in an eBPF program attached to this device;
3. gre_fb_xmit() or __gre6_xmit() processes these skb's:

gre_build_header(skb, tun_hlen,
 flags, protocol,
 tunnel_id_to_key32(tun_info->key.tun_id),
 (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++)
      : 0);   ^^^^^^^^^^^^^^^^^

Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may
try to do this tunnel->o_seqno++ in parallel, which is racy.  Fix it by
making o_seqno atomic_t.

As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless
xmit"), making o_seqno atomic_t increases "chance for packets being out
of order at receiver" when NETIF_F_LLTX is on.

Maybe a better fix would be:

1. Do not ignore "oseq" in external mode.  Users MUST specify "oseq" if
   they want the kernel to allow sequencing of outgoing packets;
2. Reject all outgoing TUNNEL_SEQ packets if the device was not created
   with "oseq".

Unfortunately, that would break userspace.

We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us
do it in separate patches to keep this fix minimal.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ip6_gre: Make o_seqno start from 0 in native mode

[ Upstream commit fde98ae91f79cab4e020f40c35ed23cbdc59661c ]

For IP6GRE and IP6GRETAP devices, currently o_seqno starts from 1 in
native mode.  According to RFC 2890 2.2., "The first datagram is sent
with a sequence number of 0."  Fix it.

It is worth mentioning that o_seqno already starts from 0 in collect_md
mode, see the "if (tunnel->parms.collect_md)" clause in __gre6_xmit(),
where tunnel->o_seqno is passed to gre_build_header() before getting
incremented.

Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ip_gre: Make o_seqno start from 0 in native mode

[ Upstream commit ff827beb706ed719c766acf36449801ded0c17fc ]

For GRE and GRETAP devices, currently o_seqno starts from 1 in native
mode.  According to RFC 2890 2.2., "The first datagram is sent with a
sequence number of 0."  Fix it.

It is worth mentioning that o_seqno already starts from 0 in collect_md
mode, see gre_fb_xmit(), where tunnel->o_seqno is passed to
gre_build_header() before getting incremented.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: sync err code when tcp connection was refused

[ Upstream commit 4e2e65e2e56c6ceb4ea1719360080c0af083229e ]

In the current implementation, when TCP initiates a connection
to an unavailable [ip,port], ECONNREFUSED will be stored in the
TCP socket, but SMC will not. However, some apps (like curl) use
getsockopt(,,SO_ERROR,,) to get the error information, which makes
them miss the error message and behave strangely.

Fixes: 50717a37db03 ("net/smc: nonblocking connect rework")
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: add return value for mailbox handling in PF

[ Upstream commit c59d606296842409a6e5a4828235b0bd46b12bc4 ]

Currently, there are some querying mailboxes sent from VF to PF,
and VF will wait the PF's handling result. For mailbox
HCLGE_MBX_GET_QID_IN_PF and HCLGE_MBX_GET_RSS_KEY, it may fail
when the input parameter is invalid, but the prototype of their
handler function is void. In this case, PF always return success
to VF, which may cause the VF get incorrect result.

Fixes it by adding return value for these function.

Fixes: 63b1279d9905 ("net: hns3: check queue id range before using")
Fixes: 532cfc0df1e4 ("net: hns3: add a check for index in hclge_get_rss_key()")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: add validity check for message data length

[ Upstream commit 7d413735cb18ff73aaba3457b16b08332e8d3cc4 ]

Add validity check for message data length in function
hclge_send_mbx_msg(), avoid unexpected overflow.

Fixes: dde1a86e93ca ("net: hns3: Add mailbox support to PF driver")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: modify the return code of hclge_get_ring_chain_from_mbx

[ Upstream commit 48009e9972974c52a5f649f761862dd67bce3d13 ]

Currently, function hclge_get_ring_chain_from_mbx will return -ENOMEM if
ring_num is bigger than HCLGE_MBX_MAX_RING_CHAIN_PARAM_NUM. It is better to
return -EINVAL for the invalid parameter case.

So this patch fixes it by return -EINVAL in this abnormal branch.

Fixes: 5d02a58dae60 ("net: hns3: fix for buffer overflow smatch warning")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: clear inited state and stop client after failed to register netdev

[ Upstream commit e98365afc1e94ea1609268866a44112b3572c58b ]

If failed to register netdev, it needs to clear INITED state and stop
client in case of cause problem when concurrency with uninitialized
process of driver.

Fixes: a289a7e5c1d4 ("net: hns3: put off calling register_netdev() until client initialize complete")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe

[ Upstream commit 1aa24a8f3b5133dae4bc1e57427e345445f3e902 ]

--------------------------------------------
unreferenced object 0xffff000010742a00 (size 128):
  comm "swapper/0", pid 1, jiffies 4294902015 (age 1187.652s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000b4dfebaa>] __kmalloc+0x338/0x474
    [<00000000d6e716db>] sun50i_cpufreq_nvmem_probe+0xc4/0x36c
    [<000000007d6082a0>] platform_probe+0x98/0x11c
    [<00000000c990f549>] really_probe+0x234/0x5a0
    [<000000002d9fecc6>] __driver_probe_device+0x194/0x224
    [<00000000cf0b94fa>] driver_probe_device+0x64/0x13c
    [<00000000f238e4cf>] __device_attach_driver+0xf8/0x180
    [<000000006720e418>] bus_for_each_drv+0xf8/0x160
    [<00000000df4f14f6>] __device_attach+0x174/0x29c
    [<00000000782002fb>] device_initial_probe+0x20/0x30
    [<00000000c2681b06>] bus_probe_device+0xfc/0x110
    [<00000000964cf3bd>] device_add+0x5f0/0xcd0
    [<000000004b9264e3>] platform_device_add+0x198/0x390
    [<00000000fa82a9d0>] platform_device_register_full+0x178/0x210
    [<000000009a5daf13>] sun50i_cpufreq_init+0xf8/0x168
    [<000000000377cc7c>] do_one_initcall+0xe4/0x570
--------------------------------------------

if sun50i_cpufreq_get_efuse failed, then opp_tables leak.

Fixes: f328584f7bff ("cpufreq: Add sun50i nvmem based CPU scaling driver")
Signed-off-by: Xiaobing Luo <luoxiaobing0926@gmail.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: pistachio: fix use of irq_of_parse_and_map()

[ Upstream commit 0c9843a74a85224a89daa81fa66891dae2f930e1 ]

The irq_of_parse_and_map() function returns 0 on failure, and does not
return an negative value.

Fixes: cefc03e5995e ("pinctrl: Add Pistachio SoC pin control driver")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Link: https://lore.kernel.org/r/20220424031430.3170759-1-lv.ruyi@zte.com.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock

[ Upstream commit 0310b5aa0656a94102344f1e9ae2892e342a665d ]

The ROHM BD71847 PMIC has a 32.768 kHz clock.

Describe the PMIC clock to fix the following boot errors:

bd718xx-clk bd71847-clk.1.auto: No parent clk found
bd718xx-clk: probe of bd71847-clk.1.auto failed with error -22

Based on the same fix done for imx8mm-evk as per commit
a6a355ede574 ("arm64: dts: imx8mm-evk: Add 32.768 kHz clock to PMIC")

Fixes: 3e44dd09736d ("arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6ull-colibri: fix vqmmc regulator

[ Upstream commit 45974e4276a8d6653394f66666fc57d8ffa6de9a ]

The correct spelling for the property is gpios. Otherwise, the regulator
will neither reserve nor control any GPIOs. Thus, any SD/MMC card which
can use UHS-I modes will fail.

Fixes: c2e4987e0e02 ("ARM: dts: imx6ull: add Toradex Colibri iMX6ULL support")
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: check asoc strreset_chunk in sctp_generate_reconf_event

[ Upstream commit 165e3e17fe8fe6a8aab319bc6e631a2e23b9a857 ]

A null pointer reference issue can be triggered when the response of a
stream reconf request arrives after the timer is triggered, such as:

  send Incoming SSN Reset Request --->
  CPU0:
   reconf timer is triggered,
   go to the handler code before hold sk lock
                            <--- reply with Outgoing SSN Reset Request
  CPU1:
   process Outgoing SSN Reset Request,
   and set asoc->strreset_chunk to NULL
  CPU0:
   continue the handler code, hold sk lock,
   and try to hold asoc->strreset_chunk, crash!

In Ying Xu's testing, the call trace is:

  [ ] BUG: kernel NULL pointer dereference, address: 0000000000000010
  [ ] RIP: 0010:sctp_chunk_hold+0xe/0x40 [sctp]
  [ ] Call Trace:
  [ ]  <IRQ>
  [ ]  sctp_sf_send_reconf+0x2c/0x100 [sctp]
  [ ]  sctp_do_sm+0xa4/0x220 [sctp]
  [ ]  sctp_generate_reconf_event+0xbd/0xe0 [sctp]
  [ ]  call_timer_fn+0x26/0x130

This patch is to fix it by returning from the timer handler if asoc
strreset_chunk is already set to NULL.

Fixes: 7b9438de0cd4 ("sctp: add stream reconf timer")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wireguard: device: check for metadata_dst with skb_valid_dst()

[ Upstream commit 45ac774c33d834fe9d4de06ab5f1022fe8cd2071 ]

When we try to transmit an skb with md_dst attached through wireguard
we hit a null pointer dereference in wg_xmit() due to the use of
dst_mtu() which calls into dst_blackhole_mtu() which in turn tries to
dereference dst->dev.

Since wireguard doesn't use md_dsts we should use skb_valid_dst(), which
checks for DST_METADATA flag, and if it's set, then falls back to
wireguard's device mtu. That gives us the best chance of transmitting
the packet; otherwise if the blackhole netdev is used we'd get
ETH_MIN_MTU.

 [  263.693506] BUG: kernel NULL pointer dereference, address: 00000000000000e0
 [  263.693908] #PF: supervisor read access in kernel mode
 [  263.694174] #PF: error_code(0x0000) - not-present page
 [  263.694424] PGD 0 P4D 0
 [  263.694653] Oops: 0000 [#1] PREEMPT SMP NOPTI
 [  263.694876] CPU: 5 PID: 951 Comm: mausezahn Kdump: loaded Not tainted 5.18.0-rc1+ #522
 [  263.695190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014
 [  263.695529] RIP: 0010:dst_blackhole_mtu+0x17/0x20
 [  263.695770] Code: 00 00 00 0f 1f 44 00 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 47 10 48 83 e0 fc 8b 40 04 85 c0 75 09 48 8b 07 <8b> 80 e0 00 00 00 c3 66 90 0f 1f 44 00 00 48 89 d7 be 01 00 00 00
 [  263.696339] RSP: 0018:ffffa4a4422fbb28 EFLAGS: 00010246
 [  263.696600] RAX: 0000000000000000 RBX: ffff8ac9c3553000 RCX: 0000000000000000
 [  263.696891] RDX: 0000000000000401 RSI: 00000000fffffe01 RDI: ffffc4a43fb48900
 [  263.697178] RBP: ffffa4a4422fbb90 R08: ffffffff9622635e R09: 0000000000000002
 [  263.697469] R10: ffffffff9b69a6c0 R11: ffffa4a4422fbd0c R12: ffff8ac9d18b1a00
 [  263.697766] R13: ffff8ac9d0ce1840 R14: ffff8ac9d18b1a00 R15: ffff8ac9c3553000
 [  263.698054] FS:  00007f3704c337c0(0000) GS:ffff8acaebf40000(0000) knlGS:0000000000000000
 [  263.698470] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [  263.698826] CR2: 00000000000000e0 CR3: 0000000117a5c000 CR4: 00000000000006e0
 [  263.699214] Call Trace:
 [  263.699505]  <TASK>
 [  263.699759]  wg_xmit+0x411/0x450
 [  263.700059]  ? bpf_skb_set_tunnel_key+0x46/0x2d0
 [   263.700382]  ? dev_queue_xmit_nit+0x31/0x2b0
 [  263.700719]  dev_hard_start_xmit+0xd9/0x220
 [  263.701047]  __dev_queue_xmit+0x8b9/0xd30
 [  263.701344]  __bpf_redirect+0x1a4/0x380
 [  263.701664]  __dev_queue_xmit+0x83b/0xd30
 [  263.701961]  ? packet_parse_headers+0xb4/0xf0
 [  263.702275]  packet_sendmsg+0x9a8/0x16a0
 [  263.702596]  ? _raw_spin_unlock_irqrestore+0x23/0x40
 [  263.702933]  sock_sendmsg+0x5e/0x60
 [  263.703239]  __sys_sendto+0xf0/0x160
 [  263.703549]  __x64_sys_sendto+0x20/0x30
 [  263.703853]  do_syscall_64+0x3b/0x90
 [  263.704162]  entry_SYSCALL_64_after_hwframe+0x44/0xae
 [  263.704494] RIP: 0033:0x7f3704d50506
 [  263.704789] Code: 48 c7 c0 ff ff ff ff eb b7 66 2e 0f 1f 84 00 00 00 00 00 90 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89
 [  263.705652] RSP: 002b:00007ffe954b0b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
 [  263.706141] RAX: ffffffffffffffda RBX: 0000558bb259b490 RCX: 00007f3704d50506
 [  263.706544] RDX: 000000000000004a RSI: 0000558bb259b7b2 RDI: 0000000000000003
 [  263.706952] RBP: 0000000000000000 R08: 00007ffe954b0b90 R09: 0000000000000014
 [  263.707339] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe954b0b90
 [  263.707735] R13: 000000000000004a R14: 0000558bb259b7b2 R15: 0000000000000001
 [  263.708132]  </TASK>
 [  263.708398] Modules linked in: bridge netconsole bonding [last unloaded: bridge]
 [  263.708942] CR2: 00000000000000e0

Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Link: https://github.com/cilium/cilium/issues/19428
Reported-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: ensure to use the most recently sent skb when filling the rate sample

[ Upstream commit b253a0680ceadc5d7b4acca7aa2d870326cad8ad ]

If an ACK (s)acks multiple skbs, we favor the information
from the most recently sent skb by choosing the skb with
the highest prior_delivered count. But in the interval
between receiving ACKs, we send multiple skbs with the same
prior_delivered, because the tp->delivered only changes
when we receive an ACK.

We used RACK's solution, copying tcp_rack_sent_after() as
tcp_skb_sent_after() helper to determine "which packet was
sent last?". Later, we will use tcp_skb_sent_after() instead
in RACK.

Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1650422081-22153-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ requested

[ Upstream commit 05d8af449d93e04547b4c6b328e39c890bc803f4 ]

The current EOI handler for LEVEL triggered interrupts calls clk_enable(),
register IO, clk_disable(). The clock manipulation requires locking which
happens with IRQs disabled in clk_enable_lock(). Instead of turning the
clock on and off all the time, enable the clock in case LEVEL interrupt is
requested and keep the clock enabled until all LEVEL interrupts are freed.
The LEVEL interrupts are an exception on this platform and seldom used, so
this does not affect the common case.

This simplifies the LEVEL interrupt handling considerably and also fixes
the following splat found when using preempt-rt:
 ------------[ cut here ]------------
 WARNING: CPU: 0 PID: 0 at kernel/locking/rtmutex.c:2040 __rt_mutex_trylock+0x37/0x62
 Modules linked in:
 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.109-rt65-stable-standard-00068-g6a5afc4b1217 #85
 Hardware name: STM32 (Device Tree Support)
 [<c010a45d>] (unwind_backtrace) from [<c010766f>] (show_stack+0xb/0xc)
 [<c010766f>] (show_stack) from [<c06353ab>] (dump_stack+0x6f/0x84)
 [<c06353ab>] (dump_stack) from [<c01145e3>] (__warn+0x7f/0xa4)
 [<c01145e3>] (__warn) from [<c063386f>] (warn_slowpath_fmt+0x3b/0x74)
 [<c063386f>] (warn_slowpath_fmt) from [<c063b43d>] (__rt_mutex_trylock+0x37/0x62)
 [<c063b43d>] (__rt_mutex_trylock) from [<c063c053>] (rt_spin_trylock+0x7/0x16)
 [<c063c053>] (rt_spin_trylock) from [<c036a2f3>] (clk_enable_lock+0xb/0x80)
 [<c036a2f3>] (clk_enable_lock) from [<c036ba69>] (clk_core_enable_lock+0x9/0x18)
 [<c036ba69>] (clk_core_enable_lock) from [<c034e9f3>] (stm32_gpio_get+0x11/0x24)
 [<c034e9f3>] (stm32_gpio_get) from [<c034ef43>] (stm32_gpio_irq_trigger+0x1f/0x48)
 [<c034ef43>] (stm32_gpio_irq_trigger) from [<c014aa53>] (handle_fasteoi_irq+0x71/0xa8)
 [<c014aa53>] (handle_fasteoi_irq) from [<c0147111>] (generic_handle_irq+0x19/0x22)
 [<c0147111>] (generic_handle_irq) from [<c014752d>] (__handle_domain_irq+0x55/0x64)
 [<c014752d>] (__handle_domain_irq) from [<c0346f13>] (gic_handle_irq+0x53/0x64)
 [<c0346f13>] (gic_handle_irq) from [<c0100ba5>] (__irq_svc+0x65/0xc0)
 Exception stack(0xc0e01f18 to 0xc0e01f60)
 1f00:                                                       0000300c 00000000
 1f20: 0000300c c010ff01 00000000 00000000 c0e00000 c0e07714 00000001 c0e01f78
 1f40: c0e07758 00000000 ef7cd0ff c0e01f68 c010554b c0105542 40000033 ffffffff
 [<c0100ba5>] (__irq_svc) from [<c0105542>] (arch_cpu_idle+0xc/0x1e)
 [<c0105542>] (arch_cpu_idle) from [<c063be95>] (default_idle_call+0x21/0x3c)
 [<c063be95>] (default_idle_call) from [<c01324f7>] (do_idle+0xe3/0x1e4)
 [<c01324f7>] (do_idle) from [<c01327b3>] (cpu_startup_entry+0x13/0x14)
 [<c01327b3>] (cpu_startup_entry) from [<c0a00c13>] (start_kernel+0x397/0x3d4)
 [<c0a00c13>] (start_kernel) from [<00000000>] (0x0)
 ---[ end trace 0000000000000002 ]---

Power consumption measured on STM32MP157C DHCOM SoM is not increased or
is below noise threshold.

Fixes: 47beed513a85b ("pinctrl: stm32: Add level interrupt support to gpio irq chip")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Fabien Dessenne <fabien.dessenne@foss.st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
To: linux-gpio@vger.kernel.org
Reviewed-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20220421140827.214088-1-marex@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: md5: incorrect tcp_header_len for incoming connections

[ Upstream commit 5b0b9e4c2c895227c8852488b3f09839233bba54 ]

In tcp_create_openreq_child we adjust tcp_header_len for md5 using the
remote address in newsk. But that address is still 0 in newsk at this
point, and it is only set later by the callers (tcp_v[46]_syn_recv_sock).
Use the address from the request socket instead.

Fixes: cfb6eeb4c860 ("[TCP]: MD5 Signature Option (RFC2385) support.")
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220421005026.686A45EC01F2@us226.sjc.aristanetworks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: rockchip: fix RK3308 pinmux bits

[ Upstream commit 1f3e25a068832f8892a5ff71467622d012f5bc9f ]

Some of the pinmuxing bits described in rk3308_mux_recalced_data are wrong,
pointing to non-existing registers.

Fix the entire table.

Also add a comment in front of each entry with the same string that appears
in the datasheet to make the table easier to compare with the docs.

This fix has been tested on real hardware for the gpio3b3_sel entry.

Fixes: 7825aeb7b208 ("pinctrl: rockchip: add rk3308 SoC support")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220420142432.248565-1-luca.ceresoli@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook

[ Upstream commit b02d196c44ead1a5949729be9ff08fe781c3e48a ]

xmit_check_hhlen() observes the dst for getting the device hard header
length to make sure a modified packet can fit. When a helper which changes
the dst - such as bpf_skb_set_tunnel_key() - is called as part of the
xmit program the accessed dst is no longer valid.

This leads to the following splat:

 BUG: kernel NULL pointer dereference, address: 00000000000000de
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 0 PID: 798 Comm: ping Not tainted 5.18.0-rc2+ #103
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
 RIP: 0010:bpf_xmit+0xfb/0x17f
 Code: c6 c0 4d cd 8e 48 c7 c7 7d 33 f0 8e e8 42 09 fb ff 48 8b 45 58 48 8b 95 c8 00 00 00 48 2b 95 c0 00 00 00 48 83 e0 fe 48 8b 00 <0f> b7 80 de 00 00 00 39 c2 73 22 29 d0 b9 20 0a 00 00 31 d2 48 89
 RSP: 0018:ffffb148c0bc7b98 EFLAGS: 00010282
 RAX: 0000000000000000 RBX: 0000000000240008 RCX: 0000000000000000
 RDX: 0000000000000010 RSI: 00000000ffffffea RDI: 00000000ffffffff
 RBP: ffff922a828a4e00 R08: ffffffff8f1350e8 R09: 00000000ffffdfff
 R10: ffffffff8f055100 R11: ffffffff8f105100 R12: 0000000000000000
 R13: ffff922a828a4e00 R14: 0000000000000040 R15: 0000000000000000
 FS:  00007f414e8f0080(0000) GS:ffff922afdc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00000000000000de CR3: 0000000002d80006 CR4: 0000000000370ef0
 Call Trace:
  <TASK>
  lwtunnel_xmit.cold+0x71/0xc8
  ip_finish_output2+0x279/0x520
  ? __ip_finish_output.part.0+0x21/0x130

Fix by fetching the device hard header length before running the BPF code.

Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220420165219.1755407-1-eyal.birger@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_set_rbtree: overlap detection with element re-addition after deletion

[ Upstream commit babc3dc9524f0bcb5a0ec61f3c3639b11508fad6 ]

This patch fixes spurious EEXIST errors.

Extend d2df92e98a34 ("netfilter: nft_set_rbtree: handle element
re-addition after deletion") to deal with elements with same end flags
in the same transation.

Reset the overlap flag as described by 7c84d41416d8 ("netfilter:
nft_set_rbtree: Detect partial overlaps on insertion").

Fixes: 7c84d41416d8 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion")
Fixes: d2df92e98a34 ("netfilter: nft_set_rbtree: handle element re-addition after deletion")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: Add missing of_node_put() in dsa_port_link_register_of

[ Upstream commit fc06b2867f4cea543505acfb194c2be4ebf0c7d3 ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.
of_node_put() will check for NULL value.

Fixes: a20f997010c4 ("net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode

[ Upstream commit 7e842d70fe599bc13594b650b2144c4b6e6d6bf1 ]

HyperFlash devices fail to probe:

    rpc-if-hyperflash rpc-if-hyperflash: probing of hyperbus device failed

In HyperFlash or Octal-SPI Flash mode, the Transfer Data Enable bits
(SPIDE) in the Manual Mode Enable Setting Register (SMENR) are derived
from half of the transfer size, cfr. the rpcif_bits_set() helper
function.  However, rpcif_reg_{read,write}() does not take the bus size
into account, and does not double all Manual Mode Data Register access
sizes when communicating with a HyperFlash or Octal-SPI Flash device.

Fix this, and avoid the back-and-forth conversion between transfer size
and Transfer Data Enable bits, by explicitly storing the transfer size
in struct rpcif, and using that value to determine access size in
rpcif_reg_{read,write}().

Enforce that the "high" Manual Mode Read/Write Data Registers
(SM[RW]DR1) are only used for 8-byte data accesses.
While at it, forbid writing to the Manual Mode Read Data Registers,
as they are read-only.

Fixes: fff53a551db50f5e ("memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/cde9bfacf704c81865f57b15d1b48a4793da4286.1649681476.git.geert+renesas@glider.be
Link: https://lore.kernel.org/r/20220420070526.9367-1-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: stm32: Do not call stm32_gpio_get() for edge triggered IRQs in EOI

[ Upstream commit e74200ebf7c4f6a7a7d1be9f63833ddba251effa ]

The stm32_gpio_get() should only be called for LEVEL triggered interrupts,
skip calling it for EDGE triggered interrupts altogether to avoid wasting
CPU cycles in EOI handler. On this platform, EDGE triggered interrupts are
the majority and LEVEL triggered interrupts are the exception no less, and
the CPU cycles are not abundant.

Fixes: 47beed513a85b ("pinctrl: stm32: Add level interrupt support to gpio irq chip")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Fabien Dessenne <fabien.dessenne@foss.st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
To: linux-gpio@vger.kernel.org
Link: https://lore.kernel.org/r/20220415215410.498349-1-marex@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: fix 'part' field data corruption in mtd_info

[ Upstream commit 37c5f9e80e015d0df17d0c377c18523002986851 ]

Commit 46b5889cc2c5 ("mtd: implement proper partition handling")
started using "mtd_get_master_ofs()" in mtd callbacks to determine
memory offsets by means of 'part' field from mtd_info, what previously
was smashed accessing 'master' field in the mtd_set_dev_defaults() method.
That provides wrong offset what causes hardware access errors.

Just make 'part', 'master' as separate fields, rather than using
union type to avoid 'part' data corruption when mtd_set_dev_defaults()
is called.

Fixes: 46b5889cc2c5 ("mtd: implement proper partition handling")
Signed-off-by: Oleksandr Ocheretnyi <oocheret@cisco.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220417184649.449289-1-oocheret@cisco.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: Fix return value check of wait_for_completion_timeout

[ Upstream commit 084c16ab423a8890121b902b405823bfec5b4365 ]

wait_for_completion_timeout() returns unsigned long not int.
It returns 0 if timed out, and positive if completed.
The check for <= 0 is ambiguous and should be == 0 here
indicating timeout which is the only error case.

Fixes: 83738d87e3a0 ("mtd: sh_flctl: Add DMA capabilty")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220412083435.29254-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: mediatek: moore: Fix build error

[ Upstream commit 87950929e2ff2236207bdbe14bff8230558b541b ]

If EINT_MTK is m and PINCTRL_MTK_V2 is y, build fails:

drivers/pinctrl/mediatek/pinctrl-moore.o: In function `mtk_gpio_set_config':
pinctrl-moore.c:(.text+0xa6c): undefined reference to `mtk_eint_set_debounce'
drivers/pinctrl/mediatek/pinctrl-moore.o: In function `mtk_gpio_to_irq':
pinctrl-moore.c:(.text+0xacc): undefined reference to `mtk_eint_find_irq'

Select EINT_MTK for PINCTRL_MTK_V2 to fix this.

Fixes: 8174a8512e3e ("pinctrl: mediatek: make MediaTek pinctrl v2 driver ready for buidling loadable module")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20220409105958.37412-1-yuehaibing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: amlogic: fix error path in phy_g12a_usb3_pcie_probe()

[ Upstream commit 2c8045d48dee703ad8eab2be7d6547765a89c069 ]

If clk_prepare_enable() fails we call clk_disable_unprepare()
in the error path what results in a warning that the clock
is disabled and unprepared already.
And if we fail later in phy_g12a_usb3_pcie_probe() then we
bail out w/o calling clk_disable_unprepare().
This patch fixes both errors.

Fixes: 36077e16c050 ("phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/8e416f95-1084-ee28-860e-7884f7fa2e32@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipvs: correctly print the memory size of ip_vs_conn_tab

[ Upstream commit eba1a872cb73314280d5448d934935b23e30b7ca ]

The memory size of ip_vs_conn_tab changed after we use hlist
instead of list.

Fixes: 731109e78415 ("ipvs: use hlist instead of list")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35

[ Upstream commit 46ff3df87215ff42c0cd2c4bdb7d74540384a69c ]

The pinout of the OMAP35 and DM37 variants of the SOM-LV are the
same, but the macros which define the pinmuxing are different
between OMAP3530 and DM3730.  The pinmuxing was correct for
for the DM3730, but wrong for the OMAP3530.  Since the boot loader
was correctly pin-muxing the pins, this was not obvious. As the
bootloader not guaranteed to pinmux all the pins any more, this
causes an issue, so the pinmux needs to be moved from a common
file to their respective board files.

Fixes: f8a2e3ff7103 ("ARM: dts: Add minimal support for LogicPD OMAP35xx SOM-LV devkit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Message-Id: <20220303171818.11060-1-aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: am3517-evm: Fix misc pinmuxing

[ Upstream commit 942da3af32b2288e674736eb159d1fc676261691 ]

The bootloader for the AM3517 has previously done much of the pin
muxing, but as the bootloader is moving more and more to a model
based on the device tree, it may no longer automatically mux the
pins, so it is necessary to add the pinmuxing to the Linux device
trees so the respective peripherals can remain functional.

Fixes: 6ed1d7997561 ("ARM: dts: am3517-evm: Add support for UI board and Audio")
Signed-off-by: Adam Ford <aford173@gmail.com>
Message-Id: <20220226214820.747847-1-aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Fix mmc order for omap3-gta04

[ Upstream commit 09269dd050094593fc747f2a5853d189fefcb6b5 ]

Commit a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3")
introduces general mmc aliases. Let's tailor them to the need
of the GTA04 board which does not make use of mmc2 and mmc3 interfaces.

Fixes: a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Message-Id: <dc9173ee3d391d9e92b7ab8ed4f84b29f0a21c83.1646744420.git.hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sdx55: Drop IP0 interconnects

[ Upstream commit 2fb251c265608636fc961b7d38e1a03937e57371 ]

Similar to the sc7180 commit, let's drop the IP0 interconnects here
because the IP0 resource is also used in the clk-rpmh driver on sdx55.
It's bad to have the clk framework and interconnect framework control
the same RPMh resource without any coordination. The rpmh driver in the
kernel doesn't aggregate resources between clients either, so leaving
control to clk-rpmh avoids any issues with unused interconnects turning
off IP0 behind the back of the clk framework.

Cc: Alex Elder <elder@linaro.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Mike Tipton <quic_mdtipton@quicinc.com>
Fixes: b2150cab9a97 ("clk: qcom: rpmh: add support for SDX55 rpmh IPA clock")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220412220033.1273607-3-swboyd@chromium.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe

[ Upstream commit ce88613e5bd579478653a028291098143f2a5bdf ]

The pm_runtime_enable() will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Add missing pm_runtime_disable() for serdes_am654_probe().

Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220301025853.1911-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe

[ Upstream commit d644e0d79829b1b9a14beedbdb0dc1256fc3677d ]

The pm_runtime_enable will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable(). And use pm_runtime_dont_use_autosuspend() to
undo pm_runtime_use_autosuspend()
In the PM Runtime docs:
    Drivers in ->remove() callback should undo the runtime PM changes done
    in ->probe(). Usually this means calling pm_runtime_disable(),
    pm_runtime_dont_use_autosuspend() etc.

We should do this in error handling.

Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220301024615.31899-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: at91: fix pinctrl phandles

[ Upstream commit 0c640d9544d0109da3889d71ae77301e556db977 ]

Commit bf781869e5cf ("ARM: dts: at91: add pinctrl-{names, 0} for all
gpios") introduces pinctrl phandles for pins used by individual
controllers to avoid failures due to commit 2ab73c6d8323 ("gpio:
Support GPIO controllers without pin-ranges"). For SPI controllers
available on SAMA5D4 and SAMA5D3 some of the pins are defined in
SoC specific dtsi on behalf of pinctrl-0. Adding extra pinctrl phandles
on board specific dts also on behalf of pinctrl-0 overwrite the pinctrl-0
phandle specified in SoC specific dtsi. Thus add the board specific
pinctrl to pinctrl-1.

Fixes: bf781869e5cf ("ARM: dts: at91: add pinctrl-{names, 0} for all gpios")
Depends-on: 5c8b49852910 ("ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name")
Reported-by: Ajay Kathat <ajay.kathat@microchip.com>
Co-developed-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Ajay Kathat <ajay.kathat@microchip.com>
Tested-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220331141323.194355-2-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name

[ Upstream commit 5c8b49852910caffeebb1ce541fdd264ffc691b8 ]

Pinctrl phandle is for spi1 so rename it to reflect this.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220331141323.194355-1-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek

[ Upstream commit 0e486fe341fabd8e583f3d601a874cd394979c45 ]

The MCLK of the WM8731 on the AT91SAM9G20-EK board is connected to the
PCK0 output of the SoC and is expected to be set to 12MHz. Previously
this was mapped using pre-common clock API calls in the audio machine
driver but the conversion to the common clock framework broke that so
describe things in the DT instead.

Fixes: ff78a189b0ae55f ("ARM: at91: remove old at91-specific clock driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220404102806.581374-2-broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks

[ Upstream commit 3588060befff75ff39fab7122b94c6fb3148fcda ]

The corresponding API for clk_prepare_enable is clk_disable_unprepare.
Make sure that the clock is unprepared on exit by changing clk_disable
to clk_disable_unprepare.

Fixes: ed31ee7cf1fe ("phy: ti: usb2: Fix logic on -EPROBE_DEFER")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220318105748.19532-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: dra7: Fix suspend warning for vpe powerdomain

[ Upstream commit 8d2453d9a307c2eafd21242dd73f35f05fb7ce74 ]

We currently are getting the following warning after a system suspend:

Powerdomain (vpe_pwrdm) didn't enter target state 0

Looks like this is because the STANDBYMODE bit for SMART_IDLE should
not be used. The TRM "Table 12-348. VPE_SYSCONFIG" says that the value
for SMART_IDLE is "0x2: Same behavior as bit-field value of 0x1". But
if the SMART_IDLE value is used, PM_VPE_PWRSTST LASTPOWERSTATEENTERED
bits always show value of 3.

Let's fix the issue by dropping SMART_IDLE for vpe. And let's also add
the missing the powerdomain for vpe.

Fixes: 1a2095160594 ("ARM: dts: dra7: Add ti-sysc node for VPE")
Cc: Benoit Parrot <bparrot@ti.com>
Reported-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific

[ Upstream commit a12315d6d27093392b6c634e1d35a59f1d1f7a59 ]

On beagleboard revisions A to B4 we need to use gpt12 as the system timer.
However, the quirk handling added for gpt12 caused a regression for system
suspend for am335x as the PM coprocessor needs the timers idled for
suspend.

Let's make the gpt12 quirk specific to omap34xx, other SoCs don't need
it. Beagleboard revisions C and later no longer need to use the gpt12
related quirk. Then at some point, if we decide to drop support for the old
beagleboard revisions A to B4, we can also drop the gpt12 related quirks
completely.

Fixes: 3ff340e24c9d ("bus: ti-sysc: Fix gpt12 system timer issue with reserved status")
Reported-by: Kevin Hilman <khilman@baylibre.com>
Suggested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP2+: Fix refcount leak in omap_gic_of_init

[ Upstream commit 0f83e6b4161617014017a694888dd8743f46f071 ]

The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.

Fixes: fd1c07861491 ("ARM: OMAP4: Fix the init code to have OMAP4460 errata available in DT build")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Message-Id: <20220309104302.18398-1-linmq006@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: samsung: exynos5250-sata: fix missing device put in probe error paths

[ Upstream commit 5c8402c4db45dd55c2c93c8d730f5dfa7c78a702 ]

The actions of of_find_i2c_device_by_node() in probe function should be
reversed in error paths by putting the reference to obtained device.

Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220407091857.230386-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe

[ Upstream commit 388ec8f079f2f20d5cd183c3bc6f33cbc3ffd3ef ]

The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.

Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220407091857.230386-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO pin labeling for CON1

[ Upstream commit 962dd65e575dde950ef0844568edc37cfb39f302 ]

The labels for lines 61 through 84 on the periphs-banks were offset by 2.
2 lines are missing in the BOOT GPIO lines (contains 14, should be 16)
Added 2 empty entries in BOOT to realigned the rest of GPIO labels
to match the Banana Pi M5 schematics.

(Thanks to Neil Armstrong for the heads up on the position of the missing pins)

Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts")
Signed-off-by: Guillaume Giraudon <ggiraudon@prism19.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220411144427.874-1-ggiraudon@prism19.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mn: Fix SAI nodes

[ Upstream commit 574518b7ccbaef74cb89eb1a1a0da88afa1e0113 ]

The most specific compatible string element should be "fsl,imx8mn-sai"
on i.MX8M Nano, fix it from current "fsl,imx8mm-sai" (two Ms, likely
due to copy-paste error from i.MX8M Mini).

Fixes: 9e9860069725f ("arm64: dts: imx8mn: Add SAI nodes")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Adam Ford <aford173@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: NXP Linux Team <linux-imx@nxp.com>
To: linux-arm-kernel@lists.infradead.org
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue

[ Upstream commit fa51e1dc4b91375bc18349663a52395ad585bd3c ]

On a custom carrier board with a i.MX6Q Apalis SoM, the sgtl5000 codec
on the SoM is often not detected and the following error message is
seen when the sgtl5000 driver tries to read the ID register:

sgtl5000 1-000a: Error reading chip id -6

The reason for the error is that the MCLK clock is not provided
early enough.

Fix the problem by describing the MCLK pinctrl inside the codec
node instead of placing it inside the audmux pinctrl group.

With this change applied the sgtl5000 is always detected on every boot.

Fixes: 693e3ffaae5a ("ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: Fix xhci event ring dequeue pointer ERDP update issue

[ Upstream commit e91ac20889d1a26d077cc511365cd7ff4346a6f3 ]

In some situations software handles TRB events slower than adding TRBs.
If the number of TRB events to be processed in a given interrupt is exactly
the same as the event ring size 256, then the local variable
"event_ring_deq" that holds the initial dequeue position is equal to
software_dequeue after handling all 256 interrupts.

It will cause driver to not update ERDP to hardware,

Software dequeue pointer is out of sync with ERDP on interrupt exit.
On the next interrupt, the event ring may full but driver will not
update ERDP as software_dequeue is equal to ERDP.

[  536.377115] xhci_hcd 0000:00:12.0: ERROR unknown event type 37
[  566.933173] sd 8:0:0:0: [sdb] tag#27 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[  566.933181] sd 8:0:0:0: [sdb] tag#27 CDB: Write(10) 2a 00 17 71 e6 78 00 00 08 00
[  572.041186] xhci_hcd On some situataions,the0000:00:12.0: xHCI host not responding to stop endpoint command.
[  572.057193] xhci_hcd 0000:00:12.0: Host halt failed, -110
[  572.057196] xhci_hcd 0000:00:12.0: xHCI host controller not responding, assume dead
[  572.057236] sd 8:0:0:0: [sdb] tag#26 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD
[  572.057240] sd 8:0:0:0: [sdb] tag#26 CDB: Write(10) 2a 00 38 eb cc d8 00 00 08 00
[  572.057244] sd 8:0:0:0: [sdb] tag#25 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD

Hardware ERDP is updated mid event handling if there are more than 128
events in an interrupt (half of ring size).
Fix this by updating the software local variable at the same time as
hardware ERDP.

[commit message rewording -Mathias]

Fixes: dc0ffbea5729 ("usb: host: xhci: update event ring dequeue pointer on purpose")
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220408134823.2527272-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8qm: Correct SCU clock controller's compatible property

[ Upstream commit dd2737fab4a6ce9ba4eb84842bedbd87d55241a6 ]

The fsl,scu.txt dt-binding documentation explicitly mentions
that the compatible string should be either "fsl,imx8qm-clock"
or "fsl,imx8qxp-clock", followed by "fsl,scu-clk".  Also, i.MX8qm
SCU clocks and i.MX8qxp SCU clocks are really not the same, so
we have to set the compatible property according to SoC name.
Let's correct the i.MX8qm clock controller's compatible property
from
"fsl,imx8qxp-clk", "fsl,scu-clk"
to
"fsl,imx8qm-clk", "fsl,scu-clk" .

Fixes: f2180be18a63 ("arm64: dts: imx: add imx8qm common dts file")
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xsk: Fix l2fwd for copy mode + busy poll combo

[ Upstream commit 8de8b71b787f38983d414d2dba169a3bfefa668a ]

While checking AF_XDP copy mode combined with busy poll, strange
results were observed. rxdrop and txonly scenarios worked fine, but
l2fwd broke immediately.

After a deeper look, it turned out that for l2fwd, Tx side was exiting
early due to xsk_no_wakeup() returning true and in the end
xsk_generic_xmit() was never called. Note that AF_XDP Tx in copy mode
is syscall steered, so the current behavior is broken.

Txonly scenario only worked due to the fact that
sk_mark_napi_id_once_xdp() was never called - since Rx side is not in
the picture for this case and mentioned function is called in
xsk_rcv_check(), sk::sk_napi_id was never set, which in turn meant that
xsk_no_wakeup() was returning false (see the sk->sk_napi_id >=
MIN_NAPI_ID check in there).

To fix this, prefer busy poll in xsk_sendmsg() only when zero copy is
enabled on a given AF_XDP socket. By doing so, busy poll in copy mode
would not exit early on Tx side and eventually xsk_generic_xmit() will
be called.

Fixes: a0731952d9cd ("xsk: Add busy-poll support for {recv,send}msg()")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220406155804.434493-1-maciej.fijalkowski@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: fix ecc parameters for mt7622

[ Upstream commit 9fe4e0d3cbfe90152137963cc024ecb63db6e8e6 ]

According to the datasheet, mt7622 only has 5 ECC capabilities instead
of 7, and the decoding error register is arranged  as follows:
+------+---------+---------+---------+---------+
| Bits |  19:15  |  14:10  |   9:5   |   4:0   |
+------+---------+---------+---------+---------+
| Name | ERRNUM3 | ERRNUM2 | ERRNUM1 | ERRNUM0 |
+------+---------+---------+---------+---------+
This means err_mask should be 0x1f instead of 0x3f and the number of
bits shifted in mtk_ecc_get_stats should be 5 instead of 8.

This commit introduces err_shift for the difference in this register
and fix other existing parameters.

Public MT7622 reference manual can be found on [0] and the info this
commit is based on is from page 656 and page 660.

[0]: https://wiki.banana-pi.org/Banana_Pi_BPI-R64#Documents

Fixes: 98dea8d71931 ("mtd: nand: mtk: Support MT7622 NAND flash controller.")
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220402160315.919094-1-gch981213@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio:imu:bmi160: disable regulator in error path

[ Upstream commit d926054d5565d3cfa2c7c3f7a48e79bcc10453ed ]

Regulator should be disabled in error path as mentioned in _regulator_put().
Also disable accel if gyro cannot be enabled.

[   16.233604] WARNING: CPU: 0 PID: 2177 at drivers/regulator/core.c:2257 _regulator_put
[   16.240453] Call Trace:
[   16.240572]  <TASK>
[   16.240676]  regulator_put+0x26/0x40
[   16.240853]  regulator_bulk_free+0x26/0x50
[   16.241050]  release_nodes+0x3f/0x70
[   16.241225]  devres_release_group+0x147/0x1c0
[   16.241441]  ? bmi160_core_probe+0x175/0x3a0 [bmi160_core]

Fixes: 5dea3fb066f0 ("iio: imu: bmi160: added regulator support")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20220327154005.806049-1-ztong0001@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson: remove CPU opps below 1GHz for SM1 boards

[ Upstream commit fd86d85401c2049f652293877c0f7e6e5afc3bbc ]

Amlogic SM1 devices experience CPU stalls and random board wedges when
the system idles and CPU cores clock down to lower opp points. Recent
vendor kernels include a change to remove 100-250MHz and other distro
sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
are removed or the CPU governor forced to performance stalls are still
observed, so let's remove them to improve stability and uptime.

Fixes: 3d9e76483049 ("arm64: dts: meson-sm1-sei610: enable DVFS")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220210100638.19130-3-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson: remove CPU opps below 1GHz for G12B boards

[ Upstream commit 6c4d636bc00dc17c63ffb2a73a0da850240e26e3 ]

Amlogic G12B devices experience CPU stalls and random board wedges when
the system idles and CPU cores clock down to lower opp points. Recent
vendor kernels include a change to remove 100-250MHz and other distro
sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
are removed or the CPU governor forced to performance stalls are still
observed, so let's remove them to improve stability and uptime.

Fixes: b96d4e92709b ("arm64: dts: meson-g12b: support a311d and s922x cpu operating points")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220210100638.19130-2-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: udlfb: properly check endpoint type

[ Upstream commit aaf7dbe07385e0b8deb7237eca2a79926bbc7091 ]

syzbot reported warning in usb_submit_urb, which is caused by wrong
endpoint type.

This driver uses out bulk endpoint for communication, so
let's check if this endpoint is present and bail out early if not.

Fail log:

usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 4822 at drivers/usb/core/urb.c:493 usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493
Modules linked in:
CPU: 0 PID: 4822 Comm: kworker/0:3 Tainted: G        W         5.13.0-syzkaller #0
...
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493
...
Call Trace:
 dlfb_submit_urb+0x89/0x160 drivers/video/fbdev/udlfb.c:1969
 dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315
 dlfb_ops_set_par+0x2a3/0x840 drivers/video/fbdev/udlfb.c:1110
 dlfb_usb_probe.cold+0x113e/0x1f4a drivers/video/fbdev/udlfb.c:1732
 usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396

Fixes: 88e58b1a42f8 ("Staging: add udlfb driver")
Reported-and-tested-by: syzbot+53ce4a4246d0fe0fee34@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: qcom-cpufreq-hw: Fix throttle frequency value on EPSS platforms

[ Upstream commit f84ccad5f5660f86a642a3d7e2bfdc4e7a8a2d49 ]

On QCOM platforms with EPSS flavour of cpufreq IP a throttled frequency is
obtained from another register REG_DOMAIN_STATE, thus the helper function
qcom_lmh_get_throttle_freq() should be modified accordingly, as for now
it returns gibberish since .reg_current_vote is unset for EPSS hardware.

To exclude a hardcoded magic number 19200 it is replaced by "xo" clock rate
in KHz.

Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: qcom-hw: fix the race between LMH worker and cpuhp

[ Upstream commit 5e4f009da6be563984ba4db4ef4f32529e9aeb90 ]

The driver would disable the worker when cpu is being put offline, but
it happens closer to the end of cpufreq_offline(). The function
qcom_lmh_dcvs_poll() can be running in parallel with this, when
policy->cpus already has been updated. Read policy->related_cpus
instead.

[   37.122433] ------------[ cut here ]------------
[   37.127225] WARNING: CPU: 0 PID: 187 at drivers/base/arch_topology.c:180 topology_update_thermal_pressure+0xec/0x100
[   37.138098] Modules linked in:
[   37.141279] CPU: 0 PID: 187 Comm: kworker/0:3 Tainted: G S                5.17.0-rc6-00389-g37c83d0b8710-dirty #713
[   37.158306] Workqueue: events qcom_lmh_dcvs_poll
[   37.163095] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   37.170278] pc : topology_update_thermal_pressure+0xec/0x100
[   37.176131] lr : topology_update_thermal_pressure+0x20/0x100
[   37.181977] sp : ffff800009b6bce0
[   37.185402] x29: ffff800009b6bce0 x28: ffffd87abe92b000 x27: ffff04bd7292e205
[   37.192792] x26: ffffd87abe930af8 x25: ffffd87abe94e4c8 x24: 0000000000000000
[   37.200180] x23: ffff04bb01177018 x22: ffff04bb011770c0 x21: ffff04bb01177000
[   37.207567] x20: ffff04bb0a419000 x19: 00000000000c4e00 x18: 0000000000000000
[   37.214954] x17: 000000040044ffff x16: 004000b2b5503510 x15: 0000006aaa1326d2
[   37.222333] x14: 0000000000000232 x13: 0000000000000001 x12: 0000000000000040
[   37.229718] x11: ffff04bb00400000 x10: 968f57bd39f701c8 x9 : ffff04bb0acc8674
[   37.237095] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffffd87abd90092c
[   37.244478] x5 : 0000000000000016 x4 : 0000000000000000 x3 : 0000000000000100
[   37.251852] x2 : ffff04bb0a419020 x1 : 0000000000000100 x0 : 0000000000000100
[   37.259235] Call trace:
[   37.261771]  topology_update_thermal_pressure+0xec/0x100
[   37.267266]  qcom_lmh_dcvs_poll+0xbc/0x154
[   37.271505]  process_one_work+0x288/0x69c
[   37.275654]  worker_thread+0x74/0x470
[   37.279450]  kthread+0xfc/0x100
[   37.282712]  ret_from_fork+0x10/0x20
[   37.286417] irq event stamp: 74
[   37.289664] hardirqs last  enabled at (73): [<ffffd87abdd78af4>] _raw_spin_unlock_irq+0x44/0x80
[   37.298632] hardirqs last disabled at (74): [<ffffd87abdd71fc0>] __schedule+0x710/0xa10
[   37.306885] softirqs last  enabled at (58): [<ffffd87abcc90410>] _stext+0x410/0x588
[   37.314778] softirqs last disabled at (51): [<ffffd87abcd1bf68>] __irq_exit_rcu+0x158/0x174
[   37.323386] ---[ end trace 0000000000000000 ]---

Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_net: fix wrong buf address calculation when using xdp

commit acb16b395c3f3d7502443e0c799c2b42df645642 upstream.

We received a report[1] of kernel crashes when Cilium is used in XDP
mode with virtio_net after updating to newer kernels. After
investigating the reason it turned out that when using mergeable bufs
with an XDP program which adjusts xdp.data or xdp.data_meta page_to_buf()
calculates the build_skb address wrong because the offset can become less
than the headroom so it gets the address of the previous page (-X bytes
depending on how lower offset is):
 page_to_skb: page addr ffff9eb2923e2000 buf ffff9eb2923e1ffc offset 252 headroom 256

This is a pr_err() I added in the beginning of page_to_skb which clearly
shows offset that is less than headroom by adding 4 bytes of metadata
via an xdp prog. The calculations done are:
 receive_mergeable():
 headroom = VIRTIO_XDP_HEADROOM; // VIRTIO_XDP_HEADROOM == 256 bytes
 offset = xdp.data - page_address(xdp_page) -
          vi->hdr_len - metasize;

 page_to_skb():
 p = page_address(page) + offset;
 ...
 buf = p - headroom;

Now buf goes -4 bytes from the page's starting address as can be seen
above which is set as skb->head and skb->data by build_skb later. Depending
on what's done with the skb (when it's freed most often) we get all kinds
of corruptions and BUG_ON() triggers in mm[2]. We have to recalculate
the new headroom after the xdp program has run, similar to how offset
and len are recalculated. Headroom is directly related to
data_hard_start, data and data_meta, so we use them to get the new size.
The result is correct (similar pr_err() in page_to_skb, one case of
xdp_page and one case of virtnet buf):
 a) Case with 4 bytes of metadata
 [  115.949641] page_to_skb: page addr ffff8b4dcfad2000 offset 252 headroom 252
 [  121.084105] page_to_skb: page addr ffff8b4dcf018000 offset 20732 headroom 252
 b) Case of pushing data +32 bytes
 [  153.181401] page_to_skb: page addr ffff8b4dd0c4d000 offset 288 headroom 288
 [  158.480421] page_to_skb: page addr ffff8b4dd00b0000 offset 24864 headroom 288
 c) Case of pushing data -33 bytes
 [  835.906830] page_to_skb: page addr ffff8b4dd3270000 offset 223 headroom 223
 [  840.839910] page_to_skb: page addr ffff8b4dcdd68000 offset 12511 headroom 223

Offset and headroom are equal because offset points to the start of
reserved bytes for the virtio_net header which are at buf start +
headroom, while data points at buf start + vnet hdr size + headroom so
when data or data_meta are adjusted by the xdp prog both the headroom size
and the offset change equally. We can use data_hard_start to compute the
new headroom after the xdp prog (linearized / page start case, the
virtnet buf case is similar just with bigger base offset):
 xdp.data_hard_start = page_address + vnet_hdr
 xdp.data = page_address + vnet_hdr + headroom
 new headroom after xdp prog = xdp.data - xdp.data_hard_start - metasize

An example reproducer xdp prog[3] is below.

[1] https://github.com/cilium/cilium/issues/19453

[2] Two of the many traces:
 [   40.437400] BUG: Bad page state in process swapper/0  pfn:14940
 [   40.916726] BUG: Bad page state in process systemd-resolve  pfn:053b7
 [   41.300891] kernel BUG at include/linux/mm.h:720!
 [   41.301801] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
 [   41.302784] CPU: 1 PID: 1181 Comm: kubelet Kdump: loaded Tainted: G    B   W         5.18.0-rc1+ #37
 [   41.304458] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1.fc35 04/01/2014
 [   41.306018] RIP: 0010:page_frag_free+0x79/0xe0
 [   41.306836] Code: 00 00 75 ea 48 8b 07 a9 00 00 01 00 74 e0 48 8b 47 48 48 8d 50 ff a8 01 48 0f 45 fa eb d0 48 c7 c6 18 b8 30 a6 e8 d7 f8 fc ff <0f> 0b 48 8d 78 ff eb bc 48 8b 07 a9 00 00 01 00 74 3a 66 90 0f b6
 [   41.310235] RSP: 0018:ffffac05c2a6bc78 EFLAGS: 00010292
 [   41.311201] RAX: 000000000000003e RBX: 0000000000000000 RCX: 0000000000000000
 [   41.312502] RDX: 0000000000000001 RSI: ffffffffa6423004 RDI: 00000000ffffffff
 [   41.313794] RBP: ffff993c98823600 R08: 0000000000000000 R09: 00000000ffffdfff
 [   41.315089] R10: ffffac05c2a6ba68 R11: ffffffffa698ca28 R12: ffff993c98823600
 [   41.316398] R13: ffff993c86311ebc R14: 0000000000000000 R15: 000000000000005c
 [   41.317700] FS:  00007fe13fc56740(0000) GS:ffff993cdd900000(0000) knlGS:0000000000000000
 [   41.319150] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [   41.320152] CR2: 000000c00008a000 CR3: 0000000014908000 CR4: 0000000000350ee0
 [   41.321387] Call Trace:
 [   41.321819]  <TASK>
 [   41.322193]  skb_release_data+0x13f/0x1c0
 [   41.322902]  __kfree_skb+0x20/0x30
 [   41.343870]  tcp_recvmsg_locked+0x671/0x880
 [   41.363764]  tcp_recvmsg+0x5e/0x1c0
 [   41.384102]  inet_recvmsg+0x42/0x100
 [   41.406783]  ? sock_recvmsg+0x1d/0x70
 [   41.428201]  sock_read_iter+0x84/0xd0
 [   41.445592]  ? 0xffffffffa3000000
 [   41.462442]  new_sync_read+0x148/0x160
 [   41.479314]  ? 0xffffffffa3000000
 [   41.496937]  vfs_read+0x138/0x190
 [   41.517198]  ksys_read+0x87/0xc0
 [   41.535336]  do_syscall_64+0x3b/0x90
 [   41.551637]  entry_SYSCALL_64_after_hwframe+0x44/0xae
 [   41.568050] RIP: 0033:0x48765b
 [   41.583955] Code: e8 4a 35 fe ff eb 88 cc cc cc cc cc cc cc cc e8 fb 7a fe ff 48 8b 7c 24 10 48 8b 74 24 18 48 8b 54 24 20 48 8b 44 24 08 0f 05 <48> 3d 01 f0 ff ff 76 20 48 c7 44 24 28 ff ff ff ff 48 c7 44 24 30
 [   41.632818] RSP: 002b:000000c000a2f5b8 EFLAGS: 00000212 ORIG_RAX: 0000000000000000
 [   41.664588] RAX: ffffffffffffffda RBX: 000000c000062000 RCX: 000000000048765b
 [   41.681205] RDX: 0000000000005e54 RSI: 000000c000e66000 RDI: 0000000000000016
 [   41.697164] RBP: 000000c000a2f608 R08: 0000000000000001 R09: 00000000000001b4
 [   41.713034] R10: 00000000000000b6 R11: 0000000000000212 R12: 00000000000000e9
 [   41.728755] R13: 0000000000000001 R14: 000000c000a92000 R15: ffffffffffffffff
 [   41.744254]  </TASK>
 [   41.758585] Modules linked in: br_netfilter bridge veth netconsole virtio_net

 and

 [   33.524802] BUG: Bad page state in process systemd-network  pfn:11e60
 [   33.528617] page ffffe05dc0147b00 ffffe05dc04e7a00 ffff8ae9851ec000 (1) len 82 offset 252 metasize 4 hroom 0 hdr_len 12 data ffff8ae9851ec10c data_meta ffff8ae9851ec108 data_end ffff8ae9851ec14e
 [   33.529764] page:000000003792b5ba refcount:0 mapcount:-512 mapping:0000000000000000 index:0x0 pfn:0x11e60
 [   33.532463] flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
 [   33.532468] raw: 000fffffc0000000 0000000000000000 dead000000000122 0000000000000000
 [   33.532470] raw: 0000000000000000 0000000000000000 00000000fffffdff 0000000000000000
 [   33.532471] page dumped because: nonzero mapcount
 [   33.532472] Modules linked in: br_netfilter bridge veth netconsole virtio_net
 [   33.532479] CPU: 0 PID: 791 Comm: systemd-network Kdump: loaded Not tainted 5.18.0-rc1+ #37
 [   33.532482] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1.fc35 04/01/2014
 [   33.532484] Call Trace:
 [   33.532496]  <TASK>
 [   33.532500]  dump_stack_lvl+0x45/0x5a
 [   33.532506]  bad_page.cold+0x63/0x94
 [   33.532510]  free_pcp_prepare+0x290/0x420
 [   33.532515]  free_unref_page+0x1b/0x100
 [   33.532518]  skb_release_data+0x13f/0x1c0
 [   33.532524]  kfree_skb_reason+0x3e/0xc0
 [   33.532527]  ip6_mc_input+0x23c/0x2b0
 [   33.532531]  ip6_sublist_rcv_finish+0x83/0x90
 [   33.532534]  ip6_sublist_rcv+0x22b/0x2b0

[3] XDP program to reproduce(xdp_pass.c):
 #include <linux/bpf.h>
 #include <bpf/bpf_helpers.h>

 SEC("xdp_pass")
 int xdp_pkt_pass(struct xdp_md *ctx)
 {
          bpf_xdp_adjust_head(ctx, -(int)32);
          return XDP_PASS;
 }

 char _license[] SEC("license") = "GPL";

 compile: clang -O2 -g -Wall -target bpf -c xdp_pass.c -o xdp_pass.o
 load on virtio_net: ip link set enp1s0 xdpdrv obj xdp_pass.o sec xdp_pass

CC: stable@vger.kernel.org
CC: Jason Wang <jasowang@redhat.com>
CC: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
CC: Daniel Borkmann <daniel@iogearbox.net>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: virtualization@lists.linux-foundation.org
Fixes: 8fb7da9e9907 ("virtio_net: get build_skb() buf by data ptr")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20220425103703.3067292-1-razor@blackwall.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iocost: don't reset the inuse weight of under-weighted debtors

commit 8c936f9ea11ec4e35e288810a7503b5c841a355f upstream.

When an iocg is in debt, its inuse weight is owned by debt handling and
should stay at 1. This invariant was broken when determining the amount of
surpluses at the beginning of donation calculation - when an iocg's
hierarchical weight is too low, the iocg is excluded from donation
calculation and its inuse is reset to its active regardless of its
indebtedness, triggering warnings like the following:

 WARNING: CPU: 5 PID: 0 at block/blk-iocost.c:1416 iocg_kick_waitq+0x392/0x3a0
 ...
 RIP: 0010:iocg_kick_waitq+0x392/0x3a0
 Code: 00 00 be ff ff ff ff 48 89 4d a8 e8 98 b2 70 00 48 8b 4d a8 85 c0 0f 85 4a fe ff ff 0f 0b e9 43 fe ff ff 0f 0b e9 4d fe ff ff <0f> 0b e9 50 fe ff ff e8 a2 ae 70 00 66 90 0f 1f 44 00 00 55 48 89
 RSP: 0018:ffffc90000200d08 EFLAGS: 00010016
 ...
  <IRQ>
  ioc_timer_fn+0x2e0/0x1470
  call_timer_fn+0xa1/0x2c0
 ...

As this happens only when an iocg's hierarchical weight is negligible, its
impact likely is limited to triggering the warnings. Fix it by skipping
resetting inuse of under-weighted debtors.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Rik van Riel <riel@surriel.com>
Fixes: c421a3eb2e27 ("blk-iocost: revamp debt handling")
Cc: stable@vger.kernel.org # v5.10+
Link: https://lore.kernel.org/r/YmjODd4aif9BzFuO@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests

commit 7e0815b3e09986d2fe651199363e135b9358132a upstream.

When a XEN_HVM guest uses the XEN PIRQ/Eventchannel mechanism, then
PCI/MSI[-X] masking is solely controlled by the hypervisor, but contrary to
XEN_PV guests this does not disable PCI/MSI[-X] masking in the PCI/MSI
layer.

This can lead to a situation where the PCI/MSI layer masks an MSI[-X]
interrupt and the hypervisor grants the write despite the fact that it
already requested the interrupt. As a consequence interrupt delivery on the
affected device is not happening ever.

Set pci_msi_ignore_mask to prevent that like it's done for XEN_PV guests
already.

Fixes: 809f9267bbab ("xen: map MSIs into pirqs")
Reported-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Reported-by: Dusty Mabe <dustymabe@redhat.com>
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Noah Meyerhans <noahm@debian.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87tuaduxj5.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: patch_text: Fixup last cpu should be master

commit 8ec1442953c66a1d8462cccd8c20b7ba561f5915 upstream.

These patch_text implementations are using stop_machine_cpuslocked
infrastructure with atomic cpu_count. The original idea: When the
master CPU patch_text, the others should wait for it. But current
implementation is using the first CPU as master, which couldn't
guarantee the remaining CPUs are waiting. This patch changes the
last CPU as the master to solve the potential risk.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 043cb41a85de ("riscv: introduce interfaces to patch kernel code")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hex2bin: fix access beyond string end

commit e4d8a29997731b3bb14059024b24df9f784288d0 upstream.

If we pass too short string to "hex2bin" (and the string size without
the terminating NUL character is even), "hex2bin" reads one byte after
the terminating NUL character.  This patch fixes it.

Note that hex_to_bin returns -1 on error and hex2bin return -EINVAL on
error - so we can't just return the variable "hi" or "lo" on error.
This inconsistency may be fixed in the next merge window, but for the
purpose of fixing this bug, we just preserve the existing behavior and
return -1 and -EINVAL.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: b78049831ffe ("lib: add error checking to hex2bin")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hex2bin: make the function hex_to_bin constant-time

commit e5be15767e7e284351853cbaba80cde8620341fb upstream.

The function hex2bin is used to load cryptographic keys into device
mapper targets dm-crypt and dm-integrity.  It should take constant time
independent on the processed data, so that concurrently running
unprivileged code can't infer any information about the keys via
microarchitectural convert channels.

This patch changes the function hex_to_bin so that it contains no
branches and no memory accesses.

Note that this shouldn't cause performance degradation because the size
of the new function is the same as the size of the old function (on
x86-64) - and the new function causes no branch misprediction penalties.

I compile-tested this function with gcc on aarch64 alpha arm hppa hppa64
i386 ia64 m68k mips32 mips64 powerpc powerpc64 riscv sh4 s390x sparc32
sparc64 x86_64 and with clang on aarch64 arm hexagon i386 mips32 mips64
powerpc powerpc64 s390x sparc32 sparc64 x86_64 to verify that there are
no branches in the generated code.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: samsung: fix missing GPIOLIB on ARM64 Exynos config

commit ac875df4d854ab13d9c4af682a1837a1214fecec upstream.

The Samsung pinctrl drivers depend on OF_GPIO, which is part of GPIOLIB.
ARMv7 Exynos platform selects GPIOLIB and Samsung pinctrl drivers. ARMv8
Exynos selects only the latter leading to possible wrong configuration
on ARMv8 build:

  WARNING: unmet direct dependencies detected for PINCTRL_EXYNOS
    Depends on [n]: PINCTRL [=y] && OF_GPIO [=n] && (ARCH_EXYNOS [=y] || ARCH_S5PV210 || COMPILE_TEST [=y])
    Selected by [y]:
    - ARCH_EXYNOS [=y]

Always select the GPIOLIB from the Samsung pinctrl drivers to fix the
issue.  This requires removing of OF_GPIO dependency (to avoid recursive
dependency), so add dependency on OF for COMPILE_TEST cases.

Reported-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Fixes: eed6b3eb20b9 ("arm64: Split out platform options to separate Kconfig")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220420141407.470955-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: imx8mm-venice: fix spi2 pin configuration

commit dc900431337f5f861e3cc47ec5be5a69db40ee34 upstream.

Due to what looks like a copy-paste error, the ECSPI2_MISO pad is not
muxed for SPI mode and causes reads from a slave-device connected to the
SPI header to always return zero.

Configure the ECSPI2_MISO pad for SPI mode on the gw71xx, gw72xx and
gw73xx families of boards that got this wrong.

Fixes: 6f30b27c5ef5 ("arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits")
Cc: stable@vger.kernel.org # 5.12
Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mhi: host: pci_generic: Flush recovery worker during freeze

commit c38f83bae4037023827c85e045841d0421f85034 upstream.

It is possible that the recovery work might be running while the freeze
gets executed (during hibernation etc.,). Currently, we don't powerdown
the stack if it is not up but if the recovery work completes after freeze,
then the device will be up afterwards. This will not be a sane situation.

So let's flush the recovery worker before trying to powerdown the device.

Cc: stable@vger.kernel.org
Fixes: 5f0c2ee1fe8d ("bus: mhi: pci-generic: Fix hibernation")
Reported-by: Bhaumik Vasav Bhatt <quic_bbhatt@quicinc.com>
Reviewed-by: Bhaumik Vasav Bhatt <quic_bbhatt@quicinc.com>
Link: https://lore.kernel.org/r/20220408150039.17297-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mhi: host: pci_generic: Add missing poweroff() PM callback

commit e64d5fa5044f225ac87d96a7e4be11389999c4c6 upstream.

During hibernation process, once thaw() stage completes, the MHI endpoint
devices will be in M0 state post recovery. After that, the devices will be
powered down so that the system can enter the target sleep state. During
this stage, the PCI core will put the devices in D3hot. But this transition
is allowed by the MHI spec. The devices can only enter D3hot when it is in
M3 state.

So for fixing this issue, let's add the poweroff() callback that will get
executed before putting the system in target sleep state during
hibernation. This callback will power down the device properly so that it
could be restored during restore() or thaw() stage.

Cc: stable@vger.kernel.org
Fixes: 5f0c2ee1fe8d ("bus: mhi: pci-generic: Fix hibernation")
Reported-by: Hemant Kumar <quic_hemantk@quicinc.com>
Suggested-by: Hemant Kumar <quic_hemantk@quicinc.com>
Link: https://lore.kernel.org/r/20220405125907.5644-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: fix possible NULL pointer dereference for req->r_session

commit 7acae6183cf37c48b8da48bbbdb78820fb3913f3 upstream.

The request will be inserted into the ci->i_unsafe_dirops before
assigning the req->r_session, so it's possible that we will hit
NULL pointer dereference bug here.

Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/55327
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch_topology: Do not set llc_sibling if llc_id is invalid

commit 1dc9f1a66e1718479e1c4f95514e1750602a3cb9 upstream.

When ACPI is not enabled, cpuid_topo->llc_id = cpu_topo->llc_id = -1, which
will set llc_sibling 0xff(...), this is misleading.

Don't set llc_sibling(default 0) if we don't know the cache topology.

Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Wang Qing <wangqing@vivo.com>
Fixes: 37c3ec2d810f ("arm64: topology: divorce MC scheduling domain from core_siblings")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1649644580-54626-1-git-send-email-wangqing@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device

commit 637674fa40059cddcc3ad2212728965072f62ea3 upstream.

The EndRun PTP/1588 dual serial port device is based on the Oxford
Semiconductor OXPCIe952 UART device with the PCI vendor:device ID set
for EndRun Technologies and is therefore driven by a fixed 62.5MHz clock
input derived from the 100MHz PCI Express clock.  The clock rate is
divided by the oversampling rate of 16 as it is supplied to the baud
rate generator, yielding the baud base of 3906250.

Replace the incorrect baud base of 4000000 with the right value of
3906250 then, complementing commit 6cbe45d8ac93 ("serial: 8250: Correct
the clock for OxSemi PCIe devices").

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable <stable@kernel.org>
Fixes: 1bc8cde46a159 ("8250_pci: Added driver for Endrun Technologies PTP PCIe card.")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181515270.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: Also set sticky MCR bits in console restoration

commit 6e6eebdf5e2455f089ccd000754a0deaeb79af82 upstream.

Sticky MCR bits are lost in console restoration if console suspending
has been disabled.  This currently affects the AFE bit, which works in
combination with RTS which we set, so we want to make sure the UART
retains control of its FIFO where previously requested.  Also specific
drivers may need other bits in the future.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 4516d50aabed ("serial: 8250: Use canary to restart console after suspend")
Cc: stable@vger.kernel.org # v4.0+
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181518490.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: amba-pl011: do not time out prematurely when draining tx fifo

commit 0e4deb56b0c625efdb70c94f150429e2f2a16fa1 upstream.

The current timeout for draining the tx fifo in RS485 mode is calculated by
multiplying the time it takes to transmit one character (with the given
baud rate) with the maximal number of characters in the tx queue.

This timeout is too short for two reasons:
First when calculating the time to transmit one character integer division
is used which may round down the result in case of a remainder of the
division.

Fix this by rounding up the division result.

Second the hardware may need additional time (e.g for first putting the
characters from the fifo into the shift register) before the characters are
actually put onto the wire.

To be on the safe side double the current maximum number of iterations
that are used to wait for the queue draining.

Fixes: 8d479237727c ("serial: amba-pl011: add RS485 support")
Cc: stable@vger.kernel.org
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Link: https://lore.kernel.org/r/20220408233503.7251-1-LinoSanfilippo@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: imx: fix overrun interrupts in DMA mode

commit 3ee82c6e41f3d2212647ce0bc5a05a0f69097824 upstream.

Commit 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is
off") accidentally enabled overrun interrupts unconditionally when
deferring DMA enable until after the receiver has been enabled during
startup.

Fix this by using the DMA-initialised instead of DMA-enabled flag to
determine whether overrun interrupts should be enabled.

Note that overrun interrupts are already accounted for in
imx_uart_clear_rx_errors() when using DMA since commit 41d98b5da92f
("serial: imx-serial - update RX error counters when DMA is used").

Fixes: 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is off")
Cc: stable@vger.kernel.org # 4.17
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220411081957.7846-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>