Josh Poimboeuf [Wed, 28 Jun 2017 15:11:05 +0000 (10:11 -0500)]
objtool: Move checking code to check.c
In preparation for the new 'objtool undwarf generate' command, which
will rely on 'objtool check', move the checking code from
builtin-check.c to check.c where it can be used by other commands.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Jiri Slaby <jslaby@suse.cz>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/294c5c695fd73c1a5000bbe5960a7c9bec4ee6b4.1498659915.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Thu, 29 Jun 2017 21:30:07 +0000 (14:30 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Need to access netdev->num_rx_queues behind an accessor in netvsc
driver otherwise the build breaks with some configs, from Arnd
Bergmann.
2) Add dummy xfrm_dev_event() so that build doesn't fail when
CONFIG_XFRM_OFFLOAD is not set. From Hangbin Liu.
3) Don't OOPS when pfkey_msg2xfrm_state() signals an erros, from Dan
Carpenter.
4) Fix MCDI command size for filter operations in sfc driver, from
Martin Habets.
5) Fix UFO segmenting so that we don't calculate incorrect checksums,
from Michal Kubecek.
6) When ipv6 datagram connects fail, reset destination address and
port. From Wei Wang.
7) TCP disconnect must reset the cached receive DST, from WANG Cong.
8) Fix sign extension bug on 32-bit in dev_get_stats(), from Eric
Dumazet.
9) fman driver has to depend on HAS_DMA, from Madalin Bucur.
10) Fix bpf pointer leak with xadd in verifier, from Daniel Borkmann.
11) Fix negative page counts with GFO, from Michal Kubecek.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
sfc: fix attempt to translate invalid filter ID
net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish()
bpf: prevent leaking pointer via xadd on unpriviledged
arcnet: com20020-pci: add missing pdev setup in netdev structure
arcnet: com20020-pci: fix dev_id calculation
arcnet: com20020: remove needless base_addr assignment
Trivial fix to spelling mistake in arc_printk message
arcnet: change irq handler to lock irqsave
rocker: move dereference before free
mlxsw: spectrum_router: Fix NULL pointer dereference
net: sched: Fix one possible panic when no destroy callback
virtio-net: serialize tx routine during reset
net: usb: asix88179_178a: Add support for the Belkin B2B128
fsl/fman: add dependency on HAS_DMA
net: prevent sign extension in dev_get_stats()
tcp: reset sk_rx_dst in tcp_disconnect()
net: ipv6: reset daddr and dport in sk if connect() fails
bnx2x: Don't log mc removal needlessly
bnxt_en: Fix netpoll handling.
bnxt_en: Add missing logic to handle TPA end error conditions.
...
Linus Torvalds [Thu, 29 Jun 2017 21:23:02 +0000 (14:23 -0700)]
Merge tag 'for-4.12/dm-fixes-5' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- dm thinp fix for crash that will occur when metadata device failure
races with discard passdown to the underlying data device.
- dm raid fix to not access the superblock's >= 1.9.0 'sectors' member
unconditionally.
* tag 'for-4.12/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm thin: do not queue freed thin mapping for next stage processing
dm raid: fix oops on upgrading to extended superblock format
Linus Torvalds [Thu, 29 Jun 2017 21:10:37 +0000 (14:10 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Two fixes that should go into this release.
One is an nvme regression fix from Keith, fixing a missing queue
freeze if the controller is being reset. This causes the reset to
hang.
The other is a fix for a leak of the bio protection info, if smaller
sized O_DIRECT is used. This fix should be more involved as we have
other problematic paths in the kernel, but given as this isn't a
regression in this series, we'll tackle those for 4.13"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: provide bio_uninit() free freeing integrity/task associations
nvme/pci: Fix stuck nvme reset
Edward Cree [Thu, 29 Jun 2017 15:50:06 +0000 (16:50 +0100)]
sfc: fix attempt to translate invalid filter ID
When filter insertion fails with no rollback, we were trying to convert
EFX_EF10_FILTER_ID_INVALID to an id to store in 'ids' (which is either
vlan->uc or vlan->mc). This would WARN_ON_ONCE and then record a bogus
filter ID of 0x1fff, neither of which is a good thing.
Fixes:
0ccb998bf46d ("sfc: fix filter_id misinterpretation in edge case")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubeček [Thu, 29 Jun 2017 09:13:36 +0000 (11:13 +0200)]
net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish()
Recently I started seeing warnings about pages with refcount -1. The
problem was traced to packets being reused after their head was merged into
a GRO packet by skb_gro_receive(). While bisecting the issue pointed to
commit
c21b48cc1bbf ("net: adjust skb->truesize in ___pskb_trim()") and
I have never seen it on a kernel with it reverted, I believe the real
problem appeared earlier when the option to merge head frag in GRO was
implemented.
Handling NAPI_GRO_FREE_STOLEN_HEAD state was only added to GRO_MERGED_FREE
branch of napi_skb_finish() so that if the driver uses napi_gro_frags()
and head is merged (which in my case happens after the skb_condense()
call added by the commit mentioned above), the skb is reused including the
head that has been merged. As a result, we release the page reference
twice and eventually end up with negative page refcount.
To fix the problem, handle NAPI_GRO_FREE_STOLEN_HEAD in napi_frags_finish()
the same way it's done in napi_skb_finish().
Fixes:
d7e8883cfcf4 ("net: make GRO aware of skb->head_frag")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Thu, 29 Jun 2017 01:04:59 +0000 (03:04 +0200)]
bpf: prevent leaking pointer via xadd on unpriviledged
Leaking kernel addresses on unpriviledged is generally disallowed,
for example, verifier rejects the following:
0: (b7) r0 = 0
1: (18) r2 = 0xffff897e82304400
3: (7b) *(u64 *)(r1 +48) = r2
R2 leaks addr into ctx
Doing pointer arithmetic on them is also forbidden, so that they
don't turn into unknown value and then get leaked out. However,
there's xadd as a special case, where we don't check the src reg
for being a pointer register, e.g. the following will pass:
0: (b7) r0 = 0
1: (7b) *(u64 *)(r1 +48) = r0
2: (18) r2 = 0xffff897e82304400 ; map
4: (db) lock *(u64 *)(r1 +48) += r2
5: (95) exit
We could store the pointer into skb->cb, loose the type context,
and then read it out from there again to leak it eventually out
of a map value. Or more easily in a different variant, too:
0: (bf) r6 = r1
1: (7a) *(u64 *)(r10 -8) = 0
2: (bf) r2 = r10
3: (07) r2 += -8
4: (18) r1 = 0x0
6: (85) call bpf_map_lookup_elem#1
7: (15) if r0 == 0x0 goto pc+3
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R6=ctx R10=fp
8: (b7) r3 = 0
9: (7b) *(u64 *)(r0 +0) = r3
10: (db) lock *(u64 *)(r0 +0) += r6
11: (b7) r0 = 0
12: (95) exit
from 7 to 11: R0=inv,min_value=0,max_value=0 R6=ctx R10=fp
11: (b7) r0 = 0
12: (95) exit
Prevent this by checking xadd src reg for pointer types. Also
add a couple of test cases related to this.
Fixes:
1be7f75d1668 ("bpf: enable non-root eBPF programs")
Fixes:
17a5267067f3 ("bpf: verifier (add verifier core)")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 29 Jun 2017 19:18:38 +0000 (15:18 -0400)]
Merge branch 'arcnet-fixes'
Michael Grzeschik says:
====================
arcnet: Collection of latest fixes
Here we sum up the recent fixes I collected on the way to use and
stabilise the framework. Part of it is an possible deadlock that we
prevent as well to fix the calculation of the dev_id that can be setup
by an rotary encoder. Beside that we added an trivial spelling patch and
fix some wrong and missing assignments that improves the code footprint.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Grzeschik [Wed, 28 Jun 2017 16:28:37 +0000 (18:28 +0200)]
arcnet: com20020-pci: add missing pdev setup in netdev structure
We add the pdev data to the pci devices netdev structure. This way
the interface get consistent device names in the userspace (udev).
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Grzeschik [Wed, 28 Jun 2017 16:28:36 +0000 (18:28 +0200)]
arcnet: com20020-pci: fix dev_id calculation
The dev_id was miscalculated. Only the two bits 4-5 are relevant for the
MA1 card. PCIARC1 and PCIFB2 use the four bits 4-7 for id selection.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Grzeschik [Wed, 28 Jun 2017 16:28:35 +0000 (18:28 +0200)]
arcnet: com20020: remove needless base_addr assignment
The assignment is superfluous.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Wed, 28 Jun 2017 16:28:34 +0000 (18:28 +0200)]
Trivial fix to spelling mistake in arc_printk message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Grzeschik [Wed, 28 Jun 2017 16:28:33 +0000 (18:28 +0200)]
arcnet: change irq handler to lock irqsave
This patch prevents the arcnet driver from the following deadlock.
[ 41.273910] ======================================================
[ 41.280397] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]
[ 41.287433] 4.4.0-00034-gc0ae784 #536 Not tainted
[ 41.292366] ------------------------------------------------------
[ 41.298863] arcecho/233 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire:
[ 41.305628] (&(&lp->lock)->rlock){+.+...}, at: [<
bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet]
[ 41.315199]
[ 41.315199] and this task is already holding:
[ 41.321324] (_xmit_ARCNET#2){+.-...}, at: [<
c06b934c>] packet_direct_xmit+0xfc/0x1c8
[ 41.329593] which would create a new lock dependency:
[ 41.334893] (_xmit_ARCNET#2){+.-...} -> (&(&lp->lock)->rlock){+.+...}
[ 41.341801]
[ 41.341801] but this new dependency connects a SOFTIRQ-irq-safe lock:
[ 41.350108] (_xmit_ARCNET#2){+.-...}
... which became SOFTIRQ-irq-safe at:
[ 41.357539] [<
c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.362677] [<
c063ab8c>] dev_watchdog+0x5c/0x264
[ 41.367723] [<
c0094edc>] call_timer_fn+0x6c/0xf4
[ 41.372759] [<
c00950b8>] run_timer_softirq+0x154/0x210
[ 41.378340] [<
c0036b30>] __do_softirq+0x144/0x298
[ 41.383469] [<
c0036fb4>] irq_exit+0xcc/0x130
[ 41.388138] [<
c0085c50>] __handle_domain_irq+0x60/0xb4
[ 41.393728] [<
c0014578>] __irq_svc+0x58/0x78
[ 41.398402] [<
c0010274>] arch_cpu_idle+0x24/0x3c
[ 41.403443] [<
c007127c>] cpu_startup_entry+0x1f8/0x25c
[ 41.409029] [<
c09adc90>] start_kernel+0x3c0/0x3cc
[ 41.414170]
[ 41.414170] to a SOFTIRQ-irq-unsafe lock:
[ 41.419931] (&(&lp->lock)->rlock){+.+...}
... which became SOFTIRQ-irq-unsafe at:
[ 41.427996] ... [<
c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.433409] [<
bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[ 41.439646] [<
c0089120>] handle_nested_irq+0x8c/0xec
[ 41.445063] [<
c03c1170>] regmap_irq_thread+0x190/0x314
[ 41.450661] [<
c0087244>] irq_thread_fn+0x1c/0x34
[ 41.455700] [<
c0087548>] irq_thread+0x13c/0x1dc
[ 41.460649] [<
c0050f10>] kthread+0xe4/0xf8
[ 41.465158] [<
c000f810>] ret_from_fork+0x14/0x24
[ 41.470207]
[ 41.470207] other info that might help us debug this:
[ 41.470207]
[ 41.478627] Possible interrupt unsafe locking scenario:
[ 41.478627]
[ 41.485763] CPU0 CPU1
[ 41.490521] ---- ----
[ 41.495279] lock(&(&lp->lock)->rlock);
[ 41.499414] local_irq_disable();
[ 41.505636] lock(_xmit_ARCNET#2);
[ 41.511967] lock(&(&lp->lock)->rlock);
[ 41.518741] <Interrupt>
[ 41.521490] lock(_xmit_ARCNET#2);
[ 41.525356]
[ 41.525356] *** DEADLOCK ***
[ 41.525356]
[ 41.531587] 1 lock held by arcecho/233:
[ 41.535617] #0: (_xmit_ARCNET#2){+.-...}, at: [<
c06b934c>] packet_direct_xmit+0xfc/0x1c8
[ 41.544355]
the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
[ 41.552362] -> (_xmit_ARCNET#2){+.-...} ops: 27 {
[ 41.557357] HARDIRQ-ON-W at:
[ 41.560664] [<
c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.567445] [<
c063ba28>] dev_deactivate_many+0x114/0x304
[ 41.574866] [<
c063bc3c>] dev_deactivate+0x24/0x38
[ 41.581646] [<
c0630374>] linkwatch_do_dev+0x40/0x74
[ 41.588613] [<
c06305d8>] __linkwatch_run_queue+0xec/0x140
[ 41.596120] [<
c0630658>] linkwatch_event+0x2c/0x34
[ 41.602991] [<
c004af30>] process_one_work+0x188/0x40c
[ 41.610131] [<
c004b200>] worker_thread+0x4c/0x480
[ 41.616912] [<
c0050f10>] kthread+0xe4/0xf8
[ 41.623048] [<
c000f810>] ret_from_fork+0x14/0x24
[ 41.629735] IN-SOFTIRQ-W at:
[ 41.633039] [<
c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.639820] [<
c063ab8c>] dev_watchdog+0x5c/0x264
[ 41.646508] [<
c0094edc>] call_timer_fn+0x6c/0xf4
[ 41.653190] [<
c00950b8>] run_timer_softirq+0x154/0x210
[ 41.660425] [<
c0036b30>] __do_softirq+0x144/0x298
[ 41.667201] [<
c0036fb4>] irq_exit+0xcc/0x130
[ 41.673518] [<
c0085c50>] __handle_domain_irq+0x60/0xb4
[ 41.680754] [<
c0014578>] __irq_svc+0x58/0x78
[ 41.687077] [<
c0010274>] arch_cpu_idle+0x24/0x3c
[ 41.693769] [<
c007127c>] cpu_startup_entry+0x1f8/0x25c
[ 41.701006] [<
c09adc90>] start_kernel+0x3c0/0x3cc
[ 41.707791] INITIAL USE at:
[ 41.711003] [<
c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.717696] [<
c063ba28>] dev_deactivate_many+0x114/0x304
[ 41.725026] [<
c063bc3c>] dev_deactivate+0x24/0x38
[ 41.731718] [<
c0630374>] linkwatch_do_dev+0x40/0x74
[ 41.738593] [<
c06305d8>] __linkwatch_run_queue+0xec/0x140
[ 41.746011] [<
c0630658>] linkwatch_event+0x2c/0x34
[ 41.752789] [<
c004af30>] process_one_work+0x188/0x40c
[ 41.759847] [<
c004b200>] worker_thread+0x4c/0x480
[ 41.766541] [<
c0050f10>] kthread+0xe4/0xf8
[ 41.772596] [<
c000f810>] ret_from_fork+0x14/0x24
[ 41.779198] }
[ 41.780945] ... key at: [<
c124d620>] netdev_xmit_lock_key+0x38/0x1c8
[ 41.788192] ... acquired at:
[ 41.791309] [<
c007bed8>] lock_acquire+0x70/0x90
[ 41.796361] [<
c06f9140>] _raw_spin_lock_irqsave+0x40/0x54
[ 41.802324] [<
bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet]
[ 41.808844] [<
c06b9380>] packet_direct_xmit+0x130/0x1c8
[ 41.814622] [<
c06bc7e4>] packet_sendmsg+0x3b8/0x680
[ 41.820034] [<
c05fe8b0>] sock_sendmsg+0x14/0x24
[ 41.825091] [<
c05ffd68>] SyS_sendto+0xb8/0xe0
[ 41.829956] [<
c05ffda8>] SyS_send+0x18/0x20
[ 41.834638] [<
c000f780>] ret_fast_syscall+0x0/0x1c
[ 41.839954]
[ 41.841514]
the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock:
[ 41.850302] -> (&(&lp->lock)->rlock){+.+...} ops: 5 {
[ 41.855644] HARDIRQ-ON-W at:
[ 41.858945] [<
c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.865726] [<
bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[ 41.873607] [<
c0089120>] handle_nested_irq+0x8c/0xec
[ 41.880666] [<
c03c1170>] regmap_irq_thread+0x190/0x314
[ 41.887901] [<
c0087244>] irq_thread_fn+0x1c/0x34
[ 41.894593] [<
c0087548>] irq_thread+0x13c/0x1dc
[ 41.901195] [<
c0050f10>] kthread+0xe4/0xf8
[ 41.907338] [<
c000f810>] ret_from_fork+0x14/0x24
[ 41.914025] SOFTIRQ-ON-W at:
[ 41.917328] [<
c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.924106] [<
bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[ 41.931981] [<
c0089120>] handle_nested_irq+0x8c/0xec
[ 41.939028] [<
c03c1170>] regmap_irq_thread+0x190/0x314
[ 41.946264] [<
c0087244>] irq_thread_fn+0x1c/0x34
[ 41.952954] [<
c0087548>] irq_thread+0x13c/0x1dc
[ 41.959548] [<
c0050f10>] kthread+0xe4/0xf8
[ 41.965689] [<
c000f810>] ret_from_fork+0x14/0x24
[ 41.972379] INITIAL USE at:
[ 41.975595] [<
c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.982283] [<
bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[ 41.990063] [<
c0089120>] handle_nested_irq+0x8c/0xec
[ 41.997027] [<
c03c1170>] regmap_irq_thread+0x190/0x314
[ 42.004172] [<
c0087244>] irq_thread_fn+0x1c/0x34
[ 42.010766] [<
c0087548>] irq_thread+0x13c/0x1dc
[ 42.017267] [<
c0050f10>] kthread+0xe4/0xf8
[ 42.023314] [<
c000f810>] ret_from_fork+0x14/0x24
[ 42.029903] }
[ 42.031648] ... key at: [<
bf0854cc>] __key.42091+0x0/0xfffff0f8 [arcnet]
[ 42.039255] ... acquired at:
[ 42.042372] [<
c007bed8>] lock_acquire+0x70/0x90
[ 42.047413] [<
c06f9140>] _raw_spin_lock_irqsave+0x40/0x54
[ 42.053364] [<
bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet]
[ 42.059872] [<
c06b9380>] packet_direct_xmit+0x130/0x1c8
[ 42.065634] [<
c06bc7e4>] packet_sendmsg+0x3b8/0x680
[ 42.071030] [<
c05fe8b0>] sock_sendmsg+0x14/0x24
[ 42.076069] [<
c05ffd68>] SyS_sendto+0xb8/0xe0
[ 42.080926] [<
c05ffda8>] SyS_send+0x18/0x20
[ 42.085601] [<
c000f780>] ret_fast_syscall+0x0/0x1c
[ 42.090918]
[ 42.092481]
[ 42.092481] stack backtrace:
[ 42.097065] CPU: 0 PID: 233 Comm: arcecho Not tainted 4.4.0-00034-gc0ae784 #536
[ 42.104751] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 42.111183] [<
c0017ec8>] (unwind_backtrace) from [<
c00139d0>] (show_stack+0x10/0x14)
[ 42.119337] [<
c00139d0>] (show_stack) from [<
c02a82c4>] (dump_stack+0x8c/0x9c)
[ 42.126937] [<
c02a82c4>] (dump_stack) from [<
c0078260>] (check_usage+0x4bc/0x63c)
[ 42.134815] [<
c0078260>] (check_usage) from [<
c0078438>] (check_irq_usage+0x58/0xb0)
[ 42.142964] [<
c0078438>] (check_irq_usage) from [<
c007aaa0>] (__lock_acquire+0x1524/0x20b0)
[ 42.151740] [<
c007aaa0>] (__lock_acquire) from [<
c007bed8>] (lock_acquire+0x70/0x90)
[ 42.159886] [<
c007bed8>] (lock_acquire) from [<
c06f9140>] (_raw_spin_lock_irqsave+0x40/0x54)
[ 42.168768] [<
c06f9140>] (_raw_spin_lock_irqsave) from [<
bf083bc8>] (arcnet_send_packet+0x60/0x1c0 [arcnet])
[ 42.179115] [<
bf083bc8>] (arcnet_send_packet [arcnet]) from [<
c06b9380>] (packet_direct_xmit+0x130/0x1c8)
[ 42.189182] [<
c06b9380>] (packet_direct_xmit) from [<
c06bc7e4>] (packet_sendmsg+0x3b8/0x680)
[ 42.198059] [<
c06bc7e4>] (packet_sendmsg) from [<
c05fe8b0>] (sock_sendmsg+0x14/0x24)
[ 42.206199] [<
c05fe8b0>] (sock_sendmsg) from [<
c05ffd68>] (SyS_sendto+0xb8/0xe0)
[ 42.213978] [<
c05ffd68>] (SyS_sendto) from [<
c05ffda8>] (SyS_send+0x18/0x20)
[ 42.221388] [<
c05ffda8>] (SyS_send) from [<
c000f780>] (ret_fast_syscall+0x0/0x1c)
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
v1 -> v2: removed unneeded zero assignment of flags
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Wed, 28 Jun 2017 11:44:21 +0000 (14:44 +0300)]
rocker: move dereference before free
My static checker complains that ofdpa_neigh_del() can sometimes free
"found". It just makes sense to use it first before deleting it.
Fixes:
ecf244f753e0 ("rocker: fix maybe-uninitialized warning")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 28 Jun 2017 06:03:12 +0000 (09:03 +0300)]
mlxsw: spectrum_router: Fix NULL pointer dereference
In case a VLAN device is enslaved to a bridge we shouldn't create a
router interface (RIF) for it when it's configured with an IP address.
This is already handled by the driver for other types of netdevs, such
as physical ports and LAG devices.
If this IP address is then removed and the interface is subsequently
unlinked from the bridge, a NULL pointer dereference can happen, as the
original 802.1d FID was replaced with an rFID which was then deleted.
To reproduce:
$ ip link set dev enp3s0np9 up
$ ip link add name enp3s0np9.111 link enp3s0np9 type vlan id 111
$ ip link set dev enp3s0np9.111 up
$ ip link add name br0 type bridge
$ ip link set dev br0 up
$ ip link set enp3s0np9.111 master br0
$ ip address add dev enp3s0np9.111 192.168.0.1/24
$ ip address del dev enp3s0np9.111 192.168.0.1/24
$ ip link set dev enp3s0np9.111 nomaster
Fixes:
99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Petr Machata <petrm@mellanox.com>
Tested-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gao Feng [Wed, 28 Jun 2017 04:53:54 +0000 (12:53 +0800)]
net: sched: Fix one possible panic when no destroy callback
When qdisc fail to init, qdisc_create would invoke the destroy callback
to cleanup. But there is no check if the callback exists really. So it
would cause the panic if there is no real destroy callback like the qdisc
codel, fq, and so on.
Take codel as an example following:
When a malicious user constructs one invalid netlink msg, it would cause
codel_init->codel_change->nla_parse_nested failed.
Then kernel would invoke the destroy callback directly but qdisc codel
doesn't define one. It causes one panic as a result.
Now add one the check for destroy to avoid the possible panic.
Fixes:
87b60cfacf9f ("net_sched: fix error recovery at qdisc creation")
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Wed, 28 Jun 2017 01:51:03 +0000 (09:51 +0800)]
virtio-net: serialize tx routine during reset
We don't hold any tx lock when trying to disable TX during reset, this
would lead a use after free since ndo_start_xmit() tries to access
the virtqueue which has already been freed. Fix this by using
netif_tx_disable() before freeing the vqs, this could make sure no tx
after vq freeing.
Reported-by: Jean-Philippe Menil <jpmenil@gmail.com>
Tested-by: Jean-Philippe Menil <jpmenil@gmail.com>
Fixes commit
f600b6905015 ("virtio_net: Add XDP support")
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Robert McCabe <robert.mccabe@rockwellcollins.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Wed, 28 Jun 2017 13:30:02 +0000 (15:30 +0200)]
arch: remove unused macro/function thread_saved_pc()
The only user of thread_saved_pc() in non-arch-specific code was removed
in commit
8243d5597793 ("sched/core: Remove pointless printout in
sched_show_task()"). Remove the implementations as well.
Some architectures use thread_saved_pc() in their arch-specific code.
Leave their thread_saved_pc() intact.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jens Axboe [Wed, 28 Jun 2017 21:30:13 +0000 (15:30 -0600)]
block: provide bio_uninit() free freeing integrity/task associations
Wen reports significant memory leaks with DIF and O_DIRECT:
"With nvme devive + T10 enabled, On a system it has 256GB and started
logging /proc/meminfo & /proc/slabinfo for every minute and in an hour
it increased by
15968128 kB or ~15+GB.. Approximately 256 MB / minute
leaking.
/proc/meminfo | grep SUnreclaim...
SUnreclaim: 6752128 kB
SUnreclaim: 6874880 kB
SUnreclaim: 7238080 kB
....
SUnreclaim:
22307264 kB
SUnreclaim:
22485888 kB
SUnreclaim:
22720256 kB
When testcases with T10 enabled call into __blkdev_direct_IO_simple,
code doesn't free memory allocated by bio_integrity_alloc. The patch
fixes the issue. HTX has been run with +60 hours without failure."
Since __blkdev_direct_IO_simple() allocates the bio on the stack, it
doesn't go through the regular bio free. This means that any ancillary
data allocated with the bio through the stack is not freed. Hence, we
can leak the integrity data associated with the bio, if the device is
using DIF/DIX.
Fix this by providing a bio_uninit() and export it, so that we can use
it to free this data. Note that this is a minimal fix for this issue.
Any current user of bio's that are allocated outside of
bio_alloc_bioset() suffers from this issue, most notably some drivers.
We will fix those in a more comprehensive patch for 4.13. This also
means that the commit marked as being fixed by this isn't the real
culprit, it's just the most obvious one out there.
Fixes:
542ff7bf18c6 ("block: new direct I/O implementation")
Reported-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Wed, 28 Jun 2017 20:27:15 +0000 (13:27 -0700)]
Merge tag 'nfs-for-4.12-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Bugfixes include:
- stable fix for exclusive create if the server supports the umask
attribute
- trunking detection should handle ERESTARTSYS/EINTR
- stable fix for a race in the LAYOUTGET function
- stable fix to revert "nfs_rename() handle -ERESTARTSYS dentry left
behind"
- nfs4_callback_free_slot() cannot call nfs4_slot_tbl_drain_complete()"
* tag 'nfs-for-4.12-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4.1: nfs4_callback_free_slot() cannot call nfs4_slot_tbl_drain_complete()
Revert "NFS: nfs_rename() handle -ERESTARTSYS dentry left behind"
NFSv4.1: Fix a race in nfs4_proc_layoutget
NFS: Trunking detection should handle ERESTARTSYS/EINTR
NFSv4.2: Don't send mode again in post-EXCLUSIVE4_1 SETATTR with umask
Linus Torvalds [Wed, 28 Jun 2017 20:22:26 +0000 (13:22 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This is the final set of fixes for -rc8, just a few i915 and one
vmwgfx ones.
I'm off on holidays for a week, so if anything shows up for fixes I've
asked Daniel or Sean Paul to herd it in the right direction"
[ The additional etnaviv fixes were already herded towards me as seen in
my previous pull - Linus ]
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/vmwgfx: Free hash table allocated by cmdbuf managed res mgr
drm/i915: Disable EXEC_OBJECT_ASYNC when doing relocations
drm/i915: Hold struct_mutex for per-file stats in debugfs/i915_gem_object
drm/i915: Retire the VMA's fence tracker before unbinding
Linus Torvalds [Wed, 28 Jun 2017 20:13:48 +0000 (13:13 -0700)]
Merge branch 'etnaviv/fixes' of git://git.pengutronix.de/git/lst/linux
Pull drm/etnaviv fixes from Lucas Stach:
"I realized I just missed the cut-off point for the final drm fixes
pull, but I have 2 more etnaviv fixes that need to go into 4.12, as
they fix fallout from the explicit sync work introduced in the last
merge window"
[ Pulling directly because Dave is on vacation. Noted by Daniel Vetter,
and acked by Dave Airlie - Linus ]
* 'etnaviv/fixes' of git://git.pengutronix.de/git/lst/linux:
drm/etnaviv: Fix implicit/explicit sync sense inversion
drm/etnaviv: fix submit flags getting overwritten by BO content
Daniel Stone [Thu, 22 Jun 2017 11:22:22 +0000 (12:22 +0100)]
drm/etnaviv: Fix implicit/explicit sync sense inversion
We were reading the no-implicit sync flag the wrong way around,
synchronizing too much for the explicit case, and not at all for the
implicit case. Oops.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Lucas Stach [Tue, 27 Jun 2017 14:02:51 +0000 (16:02 +0200)]
drm/etnaviv: fix submit flags getting overwritten by BO content
The addition of the flags member to etnaviv_gem_submit structure didn't
take into account that the last member of this structure is a variable
length array.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Dave Airlie [Wed, 28 Jun 2017 07:07:15 +0000 (17:07 +1000)]
Merge tag 'drm-intel-fixes-2017-06-27' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes
Just a few minor fixes. Important one is the execbuf async fix (aka
ANDROID_native_sync). There was another patch for a display coherency
corner case on APL, but we've random-walked in that space too much,
and the cherry-pick looked really invasive.
* tag 'drm-intel-fixes-2017-06-27' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Disable EXEC_OBJECT_ASYNC when doing relocations
drm/i915: Hold struct_mutex for per-file stats in debugfs/i915_gem_object
drm/i915: Retire the VMA's fence tracker before unbinding
Dave Airlie [Wed, 28 Jun 2017 07:06:58 +0000 (17:06 +1000)]
Merge branch 'vmwgfx-fixes-4.12' of git://people.freedesktop.org/~thomash/linux into drm-fixes
Single vmwgfx fix
* 'vmwgfx-fixes-4.12' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Free hash table allocated by cmdbuf managed res mgr
Trond Myklebust [Tue, 27 Jun 2017 21:40:50 +0000 (17:40 -0400)]
NFSv4.1: nfs4_callback_free_slot() cannot call nfs4_slot_tbl_drain_complete()
The current code works only for the case where we have exactly one slot,
which is no longer true.
nfs4_free_slot() will automatically declare the callback channel to be
drained when all slots have been returned.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Benjamin Coddington [Fri, 16 Jun 2017 15:12:59 +0000 (11:12 -0400)]
Revert "NFS: nfs_rename() handle -ERESTARTSYS dentry left behind"
This reverts commit
920b4530fb80430ff30ef83efe21ba1fa5623731 which could
call d_move() without holding the directory's i_mutex, and reverts commit
d4ea7e3c5c0e341c15b073016dbf3ab6c65f12f3 "NFS: Fix old dentry rehash after
move", which was a follow-up fix.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes:
920b4530fb80 ("NFS: nfs_rename() handle -ERESTARTSYS dentry left behind")
Cc: stable@vger.kernel.org # v4.10+
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Trond Myklebust [Tue, 27 Jun 2017 21:33:38 +0000 (17:33 -0400)]
NFSv4.1: Fix a race in nfs4_proc_layoutget
If the task calling layoutget is signalled, then it is possible for the
calls to nfs4_sequence_free_slot() and nfs4_layoutget_prepare() to race,
in which case we leak a slot.
The fix is to move the call to nfs4_sequence_free_slot() into the
nfs4_layoutget_release() so that it gets called at task teardown time.
Fixes:
2e80dbe7ac51 ("NFSv4.1: Close callback races for OPEN, LAYOUTGET...")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Trond Myklebust [Wed, 21 Jun 2017 14:16:56 +0000 (10:16 -0400)]
NFS: Trunking detection should handle ERESTARTSYS/EINTR
Currently, it will return EIO in those cases.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Keith Busch [Tue, 27 Jun 2017 23:44:05 +0000 (17:44 -0600)]
nvme/pci: Fix stuck nvme reset
The controller state is set to resetting prior to disabling the
controller, so this patch accounts for that state when deciding if it
needs to freeze the queues. Without this, an 'nvme reset /dev/nvme0'
blocks forever because the queues were never frozen.
Fixes:
82b057caefaf ("nvme-pci: fix multiple ctrl removal scheduling")
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Andrew F. Davis [Mon, 26 Jun 2017 17:41:20 +0000 (12:41 -0500)]
net: usb: asix88179_178a: Add support for the Belkin B2B128
The Belkin B2B128 is a USB 3.0 Hub + Gigabit Ethernet Adapter, the
Ethernet adapter uses the ASIX AX88179 USB 3.0 to Gigabit Ethernet
chip supported by this driver, add the USB ID for the same.
This patch is based on work by Geoffrey Tran <geoffrey.tran@gmail.com>
who has indicated they would like this upstreamed by someone more
familiar with the upstreaming process.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Madalin Bucur [Mon, 26 Jun 2017 15:47:00 +0000 (18:47 +0300)]
fsl/fman: add dependency on HAS_DMA
A previous commit (
5567e989198b5a8d) inserted a dependency on DMA
API that requires HAS_DMA to be added in Kconfig.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vallish Vaidyeshwara [Fri, 23 Jun 2017 18:53:06 +0000 (18:53 +0000)]
dm thin: do not queue freed thin mapping for next stage processing
process_prepared_discard_passdown_pt1() should cleanup
dm_thin_new_mapping in cases of error.
dm_pool_inc_data_range() can fail trying to get a block reference:
metadata operation 'dm_pool_inc_data_range' failed: error = -61
When dm_pool_inc_data_range() fails, dm thin aborts current metadata
transaction and marks pool as PM_READ_ONLY. Memory for thin mapping
is released as well. However, current thin mapping will be queued
onto next stage as part of queue_passdown_pt2() or passdown_endio().
This dangling thin mapping memory when processed and accessed in
next stage will lead to device mapper crashing.
Code flow without fix:
-> process_prepared_discard_passdown_pt1(m)
-> dm_thin_remove_range()
-> discard passdown
--> passdown_endio(m) queues m onto next stage
-> dm_pool_inc_data_range() fails, frees memory m
but does not remove it from next stage queue
-> process_prepared_discard_passdown_pt2(m)
-> processes freed memory m and crashes
One such stack:
Call Trace:
[<
ffffffffa037a46f>] dm_cell_release_no_holder+0x2f/0x70 [dm_bio_prison]
[<
ffffffffa039b6dc>] cell_defer_no_holder+0x3c/0x80 [dm_thin_pool]
[<
ffffffffa039b88b>] process_prepared_discard_passdown_pt2+0x4b/0x90 [dm_thin_pool]
[<
ffffffffa0399611>] process_prepared+0x81/0xa0 [dm_thin_pool]
[<
ffffffffa039e735>] do_worker+0xc5/0x820 [dm_thin_pool]
[<
ffffffff8152bf54>] ? __schedule+0x244/0x680
[<
ffffffff81087e72>] ? pwq_activate_delayed_work+0x42/0xb0
[<
ffffffff81089f53>] process_one_work+0x153/0x3f0
[<
ffffffff8108a71b>] worker_thread+0x12b/0x4b0
[<
ffffffff8108a5f0>] ? rescuer_thread+0x350/0x350
[<
ffffffff8108fd6a>] kthread+0xca/0xe0
[<
ffffffff8108fca0>] ? kthread_park+0x60/0x60
[<
ffffffff81530b45>] ret_from_fork+0x25/0x30
The fix is to first take the block ref count for discarded block and
then do a passdown discard of this block. If block ref count fails,
then bail out aborting current metadata transaction, mark pool as
PM_READ_ONLY and also free current thin mapping memory (existing error
handling code) without queueing this thin mapping onto next stage of
processing. If block ref count succeeds, then passdown discard of this
block. Discard callback of passdown_endio() will queue this thin mapping
onto next stage of processing.
Code flow with fix:
-> process_prepared_discard_passdown_pt1(m)
-> dm_thin_remove_range()
-> dm_pool_inc_data_range()
--> if fails, free memory m and bail out
-> discard passdown
--> passdown_endio(m) queues m onto next stage
Cc: stable <stable@vger.kernel.org> # v4.9+
Reviewed-by: Eduardo Valentin <eduval@amazon.com>
Reviewed-by: Cristian Gafton <gafton@amazon.com>
Reviewed-by: Anchal Agarwal <anchalag@amazon.com>
Signed-off-by: Vallish Vaidyeshwara <vallish@amazon.com>
Reviewed-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Eric Dumazet [Tue, 27 Jun 2017 14:02:20 +0000 (07:02 -0700)]
net: prevent sign extension in dev_get_stats()
Similar to the fix provided by Dominik Heidler in commit
9b3dc0a17d73 ("l2tp: cast l2tp traffic counter to unsigned")
we need to take care of 32bit kernels in dev_get_stats().
When using atomic_long_read(), we add a 'long' to u64 and
might misinterpret high order bit, unless we cast to unsigned.
Fixes:
caf586e5f23ce ("net: add a core netdev->rx_dropped counter")
Fixes:
015f0688f57ca ("net: net: add a core netdev->tx_dropped counter")
Fixes:
6e7333d315a76 ("net: add rx_nohandler stat counter")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 27 Jun 2017 15:56:52 +0000 (08:56 -0700)]
Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Three more fixes:
- Fix the previous fix merged in the last pull for the Thumb2
decompressor.
- A fix from Vladimir to correctly identify the V7M cache type.
- The optimised 3G vmsplit case does not work with LPAE, so don't
allow this to be selected for LPAE configurations"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8682/1: V7M: Set cacheid iff DminLine or IminLine is nonzero
ARM: 8681/1: make VMSPLIT_3G_OPT depends on !ARM_LPAE
ARM: 8680/1: boot/compressed: fix inappropriate Thumb2 mnemonic for __nop
Linus Torvalds [Mon, 26 Jun 2017 19:25:59 +0000 (12:25 -0700)]
Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming
Pull c6x fixlet from Mark Salter:
"Update maintainer email"
* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
MAINTAINERS: update email address for C6x maintainer
Linus Torvalds [Mon, 26 Jun 2017 18:58:21 +0000 (11:58 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 bugfix from Martin Schwidefsky:
"One last s390 patch for 4.12
Revert the re-IPL semantics back to the v4.7 state. It turned out that
the memory layout may change due to memory hotplug if load-normal is
used"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ipl: revert Load Normal semantics for LPAR CCW-type re-IPL
Deepak Rawat [Mon, 26 Jun 2017 12:39:08 +0000 (14:39 +0200)]
drm/vmwgfx: Free hash table allocated by cmdbuf managed res mgr
The hash table created during vmw_cmdbuf_res_man_create was
never freed. This causes memory leak in context creation.
Added the corresponding drm_ht_remove in vmw_cmdbuf_res_man_destroy.
Tested for memory leak by running piglit overnight and kernel
memory is not inflated which earlier was.
Cc: <stable@vger.kernel.org>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Chris Wilson [Fri, 16 Jun 2017 14:05:18 +0000 (15:05 +0100)]
drm/i915: Disable EXEC_OBJECT_ASYNC when doing relocations
If we write a relocation into the buffer, we require our own implicit
synchronisation added after the start of the execbuf, outside of the
user's control. As we may end up clflushing, or doing the patch itself
on the GPU, asynchronously we need to look at the implicit serialisation
on obj->resv and hence need to disable EXEC_OBJECT_ASYNC for this
object.
If the user does trigger a stall for relocations, we make sure the stall
is complete enough so that the batch is not submitted before we complete
those relocations.
Fixes:
77ae9957897d ("drm/i915: Enable userspace to opt-out of implicit fencing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit
071750e550af46b5d3a84ad56c2a108c3e136284)
[danvet: Resolve conflicts, resolution reviewed by Tvrtko on irc.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Sat, 17 Jun 2017 11:57:44 +0000 (12:57 +0100)]
drm/i915: Hold struct_mutex for per-file stats in debugfs/i915_gem_object
As we walk the obj->vma_list in per_file_stats(), we need to hold
struct_mutex to prevent alteration of that list.
Fixes:
1d2ac403ae3b ("drm: Protect dev->filelist with its own mutex")
Fixes:
c84455b4bacc ("drm/i915: Move debug only per-request pid tracking from request to ctx")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101460
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170617115744.4452-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit
0caf81b5c53d9bd332a95dbcb44db8de0b397a7c)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 20 Jun 2017 12:43:19 +0000 (13:43 +0100)]
drm/i915: Retire the VMA's fence tracker before unbinding
Since we may track unfenced access (GPU access to the vma that
explicitly requires no fence), vma->last_fence may be set without any
attached fence (vma->fence) and so will not be flushed when we call
i915_vma_put_fence(). Since we stopped doing a full retire of the
activity trackers for unbind, we need to explicitly retire each tracker.
Fixes:
b0decaf75bd9 ("drm/i915: Track active vma requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170620124321.1108-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
(cherry picked from commit
760a898d8069111704e1bd43f00ebf369ae46e57)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Linus Torvalds [Mon, 26 Jun 2017 01:30:05 +0000 (18:30 -0700)]
Linux 4.12-rc7
Linus Torvalds [Sun, 25 Jun 2017 19:01:56 +0000 (12:01 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix to unbreak the vdso32 build for 64bit kernels caused by
excess #includes in the mshyperv header"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mshyperv: Remove excess #includes from mshyperv.h
Linus Torvalds [Sun, 25 Jun 2017 18:59:19 +0000 (11:59 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A few fixes for timekeeping and timers:
- Plug a subtle race due to a missing READ_ONCE() in the timekeeping
code where reloading of a pointer results in an inconsistent
callback argument being supplied to the clocksource->read function.
- Correct the CLOCK_MONOTONIC_RAW sub-nanosecond accounting in the
time keeping core code, to prevent a possible discontuity.
- Apply a similar fix to the arm64 vdso clock_gettime()
implementation
- Add missing includes to clocksource drivers, which relied on
indirect includes which fails in certain configs.
- Use the proper iomem pointer for read/iounmap in a probe function"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm64/vdso: Fix nsec handling for CLOCK_MONOTONIC_RAW
time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting
time: Fix clock->read(clock) race around clocksource changes
clocksource: Explicitly include linux/clocksource.h when needed
clocksource/drivers/arm_arch_timer: Fix read and iounmap of incorrect variable
Linus Torvalds [Sun, 25 Jun 2017 18:55:21 +0000 (11:55 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Three fixlets for perf:
- Return the proper error code if aux buffers for a event are not
supported.
- Calculate the probe offset for inlined functions correctly
- Update the Skylake DTLB load/store miss event so it can count 1G
TLB entries as well"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf probe: Fix probe definition for inlined functions
perf/x86/intel: Add 1G DTLB load/store miss support for SKL
perf/aux: Correct return code of rb_alloc_aux() if !has_aux(ev)
Linus Torvalds [Sun, 25 Jun 2017 18:53:36 +0000 (11:53 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for the MIPS GIC to prevent ftrace recursion"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips-gic: Mark count and compare accessors notrace
Linus Torvalds [Sun, 25 Jun 2017 17:39:43 +0000 (10:39 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a quirk to i8042 to ignore timeout bit on Lifebook AH544
- a fixup to Synaptics RMI function 54 that was breaking some Dells
- a fix for memory leak in soc_button_array driver
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - only read the F54 query registers which are used
Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list
Input: soc_button_array - fix leaking the ACPI button descriptor buffer
Linus Torvalds [Sun, 25 Jun 2017 17:36:44 +0000 (10:36 -0700)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
"Here are the target-pending fixes for v4.12-rc7 that have been queued
up for the last 2 weeks. This includes:
- Fix a TMR related kref underflow detected by the recent refcount_t
conversion in upstream.
- Fix a iscsi-target corner case during explicit connection logout
timeout failure.
- Address last fallout in iscsi-target immediate data handling from
v4.4 target-core now allowing control CDB payload underflow"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iscsi-target: Reject immediate data underflow larger than SCSI transfer length
iscsi-target: Fix delayed logout processing greater than SECONDS_FOR_LOGOUT_COMP
target: Fix kref->refcount underflow in transport_cmd_finish_abort
WANG Cong [Sun, 25 Jun 2017 06:50:30 +0000 (23:50 -0700)]
tcp: reset sk_rx_dst in tcp_disconnect()
We have to reset the sk->sk_rx_dst when we disconnect a TCP
connection, because otherwise when we re-connect it this
dst reference is simply overridden in tcp_finish_connect().
This fixes a dst leak which leads to a loopback dev refcnt
leak. It is a long-standing bug, Kevin reported a very similar
(if not same) bug before. Thanks to Andrei for providing such
a reliable reproducer which greatly narrows down the problem.
Fixes:
41063e9dd119 ("ipv4: Early TCP socket demux.")
Reported-by: Andrei Vagin <avagin@gmail.com>
Reported-by: Kevin Xu <kaiwen.xu@hulu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang [Fri, 23 Jun 2017 22:25:37 +0000 (15:25 -0700)]
net: ipv6: reset daddr and dport in sk if connect() fails
In __ip6_datagram_connect(), reset sk->sk_v6_daddr and inet->dport if
error occurs.
In udp_v6_early_demux(), check for sk_state to make sure it is in
TCP_ESTABLISHED state.
Together, it makes sure unconnected UDP socket won't be considered as a
valid candidate for early demux.
v3: add TCP_ESTABLISHED state check in udp_v6_early_demux()
v2: fix compilation error
Fixes:
5425077d73e0 ("net: ipv6: Add early demux handler for UDP unicast")
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Sat, 24 Jun 2017 12:37:00 +0000 (15:37 +0300)]
bnx2x: Don't log mc removal needlessly
When mc configuration changes bnx2x_config_mcast() can return 0 for
success, negative for failure and positive for benign reason preventing
its immediate work, e.g., when the command awaits the completion of
a previously sent command.
When removing all configured macs on a 578xx adapter, if a positive
value would be returned driver would errneously log it as an error.
Fixes:
c7b7b483ccc9 ("bnx2x: Don't flush multicast MACs")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 24 Jun 2017 23:18:00 +0000 (16:18 -0700)]
Merge tag 'kbuild-fixes-v4.12-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
"Nothing scary, just some random fixes:
- fix warnings of host programs
- fix "make tags" when COMPILED_SOURCE=1 is specified along with O=
- clarify help message of C=1 option
- fix dependency for ncurses compatibility check
- fix "make headers_install" for fakechroot environment"
* tag 'kbuild-fixes-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix sparse warnings in nconfig
kbuild: fix header installation under fakechroot environment
kconfig: Check for libncurses before menuconfig
Kbuild: tiny correction on `make help`
tags: honor COMPILED_SOURCE with apart output directory
genksyms: add printf format attribute to error_with_pos()
Linus Torvalds [Sat, 24 Jun 2017 09:24:53 +0000 (02:24 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace
Pull timer fix from Eric Biederman:
"This fixes an issue of confusing injected signals with the signals
from posix timers that has existed since posix timers have been in the
kernel.
This patch is slightly simpler than my earlier version of this patch
as I discovered in testing that I had misspelled "#ifdef
CONFIG_POSIX_TIMERS". So I deleted that unnecessary test and made
setting of resched_timer uncondtional.
I have tested this and verified that without this patch there is a
nasty hang that is easy to trigger, and with this patch everything
works properly"
Thomas Gleixner dixit:
"It fixes the problem at hand and covers the ptrace case as well, which
I missed.
Reviewed-and-tested-by: Thomas Gleixner <tglx@linutronix.de>"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Only reschedule timers on signals timers have sent
Thomas Gleixner [Fri, 23 Jun 2017 08:50:38 +0000 (10:50 +0200)]
x86/mshyperv: Remove excess #includes from mshyperv.h
A recent commit included linux/slab.h in linux/irq.h. This breaks the build
of vdso32 on a 64-bit kernel.
The reason is that linux/irq.h gets included into the vdso code via
linux/interrupt.h which is included from asm/mshyperv.h. That makes the
32-bit vdso compile fail, because slab.h includes the pgtable headers for
64-bit on a 64-bit build.
Neither linux/clocksource.h nor linux/interrupt.h are needed in the
mshyperv.h header file itself - it has a dependency on <linux/atomic.h>.
Remove the includes and unbreak the build.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: devel@linuxdriverproject.org
Fixes:
dee863b571b0 ("hv: export current Hyper-V clocksource")
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1706231038460.2647@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Sat, 24 Jun 2017 00:53:16 +0000 (17:53 -0700)]
Merge tag 'powerpc-4.12-7' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 4.12. Most of these actually came in last
week but got held up for some more testing.
- three fixes for kprobes/ftrace/livepatch interactions.
- properly handle data breakpoints when using the Radix MMU.
- fix for perf sampling of registers during call_usermodehelper().
- properly initialise the thread_info on our emergency stacks
- add an explicit flush when doing TLB invalidations for a process
using NPU2.
Thanks to: Alistair Popple, Naveen N. Rao, Nicholas Piggin, Ravi
Bangoria, Masami Hiramatsu"
* tag 'powerpc-4.12-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64: Initialise thread_info for emergency stacks
powerpc/powernv/npu-dma: Add explicit flush when sending an ATSD
powerpc/perf: Fix oops when kthread execs user process
powerpc/64s: Handle data breakpoints in Radix mode
powerpc/kprobes: Skip livepatch_handler() for jprobes
powerpc/ftrace: Pass the correct stack pointer for DYNAMIC_FTRACE_WITH_REGS
powerpc/kprobes: Pause function_graph tracing during jprobes handling
Linus Torvalds [Sat, 24 Jun 2017 00:49:12 +0000 (17:49 -0700)]
Merge tag 'acpi-4.12-rc7' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"This fixes the ACPI-based enumeration of some I2C and SPI devices
broken in 4.11.
Specifics:
- I2C and SPI devices are expected to be enumerated by the I2C and
SPI subsystems, respectively, but due to a change made during the
4.11 cycle, in some cases the ACPI core marks them as already
enumerated which causes the I2C and SPI subsystems to overlook
them, so fix that (Jarkko Nikula)"
* tag 'acpi-4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / scan: Fix enumeration for special SPI and I2C devices
Linus Torvalds [Sat, 24 Jun 2017 00:46:10 +0000 (17:46 -0700)]
Merge branch 'i2c/for-current-fixed' of git://git./linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang.
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: Use correct function to write to register
Linus Torvalds [Sat, 24 Jun 2017 00:40:41 +0000 (17:40 -0700)]
Merge tag 'gpio-v4.12-3' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fix from Linus Walleij:
"A single GPIO patch fixing the compatible string for the MVEBU PWM
controller embedded in the GPIO controller before we release v4.12.
Hopefully"
* tag 'gpio-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mvebu: change compatible string for PWM support
Linus Torvalds [Sat, 24 Jun 2017 00:37:56 +0000 (17:37 -0700)]
Merge tag 'sound-4.12-rc7' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Nothing exciting here, just a few stable fixes:
- suppress spurious kernel WARNING in PCM core
- fix potential spin deadlock at error handling in firewire
- HD-audio PCI ID addition / fixup"
* tag 'sound-4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Apply quirks to Broxton-T, too
ALSA: firewire-lib: Fix stall of process context at packet error
ALSA: pcm: Don't treat NULL chmap as a fatal error
ALSA: hda - Add Coffelake PCI ID
Linus Torvalds [Sat, 24 Jun 2017 00:35:57 +0000 (17:35 -0700)]
Merge tag 'drm-fixes-for-v4.12-rc7' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A varied bunch of fixes, one for an API regression with connectors.
Otherwise amdgpu and i915 have a bunch of varied fixes, the shrinker
ones being the most important"
* tag 'drm-fixes-for-v4.12-rc7' of git://people.freedesktop.org/~airlied/linux:
drm: Fix GETCONNECTOR regression
drm/radeon: add a quirk for Toshiba Satellite L20-183
drm/radeon: add a PX quirk for another K53TK variant
drm/amdgpu: adjust default display clock
drm/amdgpu/atom: fix ps allocation size for EnableDispPowerGating
drm/amdgpu: add Polaris12 DID
drm/i915: Don't enable backlight at setup time.
drm/i915: Plumb the correct acquire ctx into intel_crtc_disable_noatomic()
drm/i915: Fix deadlock witha the pipe A quirk during resume
drm/i915: Remove __GFP_NORETRY from our buffer allocator
drm/i915: Encourage our shrinker more when our shmemfs allocations fails
drm/i915: Differentiate between sw write location into ring and last hw read
Linus Torvalds [Sat, 24 Jun 2017 00:33:46 +0000 (17:33 -0700)]
Merge tag 'random_for_linus_stable' of git://git./linux/kernel/git/tytso/random
Pull random fixes from Ted Ts'o:
"Fix some locking and gcc optimization issues from the most recent
random_for_linus_stable pull request"
* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: silence compiler warnings and fix race
Linus Torvalds [Sat, 24 Jun 2017 00:32:05 +0000 (17:32 -0700)]
Merge tag 'for-4.12/dm-fixes-4' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- a revert of a DM mirror commit that has proven to make the code prone
to crash
- a DM io reference count fix that resolves a NULL pointer seen when
issuing discards to a DM mirror target's device whose mirror legs do
not all support discards
- a couple DM integrity fixes
* tag 'for-4.12/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm io: fix duplicate bio completion due to missing ref count
dm integrity: fix to not disable/enable interrupts from interrupt context
Revert "dm mirror: use all available legs on multiple failures"
dm integrity: reject mappings too large for device
Linus Torvalds [Fri, 23 Jun 2017 23:30:52 +0000 (16:30 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"8 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
fs/exec.c: account for argv/envp pointers
ocfs2: fix deadlock caused by recursive locking in xattr
slub: make sysfs file removal asynchronous
lib/cmdline.c: fix get_options() overflow while parsing ranges
fs/dax.c: fix inefficiency in dax_writeback_mapping_range()
autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL
mm/vmalloc.c: huge-vmap: fail gracefully on unexpected huge vmap mappings
mm, thp: remove cond_resched from __collapse_huge_page_copy
Kees Cook [Fri, 23 Jun 2017 22:08:57 +0000 (15:08 -0700)]
fs/exec.c: account for argv/envp pointers
When limiting the argv/envp strings during exec to 1/4 of the stack limit,
the storage of the pointers to the strings was not included. This means
that an exec with huge numbers of tiny strings could eat 1/4 of the stack
limit in strings and then additional space would be later used by the
pointers to the strings.
For example, on 32-bit with a 8MB stack rlimit, an exec with 1677721
single-byte strings would consume less than 2MB of stack, the max (8MB /
4) amount allowed, but the pointers to the strings would consume the
remaining additional stack space (1677721 * 4 == 6710884).
The result (1677721 + 6710884 == 8388605) would exhaust stack space
entirely. Controlling this stack exhaustion could result in
pathological behavior in setuid binaries (CVE-2017-1000365).
[akpm@linux-foundation.org: additional commenting from Kees]
Fixes:
b6a2fea39318 ("mm: variable length argument support")
Link: http://lkml.kernel.org/r/20170622001720.GA32173@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Qualys Security Advisory <qsa@qualys.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Ren [Fri, 23 Jun 2017 22:08:55 +0000 (15:08 -0700)]
ocfs2: fix deadlock caused by recursive locking in xattr
Another deadlock path caused by recursive locking is reported. This
kind of issue was introduced since commit
743b5f1434f5 ("ocfs2: take
inode lock in ocfs2_iop_set/get_acl()"). Two deadlock paths have been
fixed by commit
b891fa5024a9 ("ocfs2: fix deadlock issue when taking
inode lock at vfs entry points"). Yes, we intend to fix this kind of
case in incremental way, because it's hard to find out all possible
paths at once.
This one can be reproduced like this. On node1, cp a large file from
home directory to ocfs2 mountpoint. While on node2, run
setfacl/getfacl. Both nodes will hang up there. The backtraces:
On node1:
__ocfs2_cluster_lock.isra.39+0x357/0x740 [ocfs2]
ocfs2_inode_lock_full_nested+0x17d/0x840 [ocfs2]
ocfs2_write_begin+0x43/0x1a0 [ocfs2]
generic_perform_write+0xa9/0x180
__generic_file_write_iter+0x1aa/0x1d0
ocfs2_file_write_iter+0x4f4/0xb40 [ocfs2]
__vfs_write+0xc3/0x130
vfs_write+0xb1/0x1a0
SyS_write+0x46/0xa0
On node2:
__ocfs2_cluster_lock.isra.39+0x357/0x740 [ocfs2]
ocfs2_inode_lock_full_nested+0x17d/0x840 [ocfs2]
ocfs2_xattr_set+0x12e/0xe80 [ocfs2]
ocfs2_set_acl+0x22d/0x260 [ocfs2]
ocfs2_iop_set_acl+0x65/0xb0 [ocfs2]
set_posix_acl+0x75/0xb0
posix_acl_xattr_set+0x49/0xa0
__vfs_setxattr+0x69/0x80
__vfs_setxattr_noperm+0x72/0x1a0
vfs_setxattr+0xa7/0xb0
setxattr+0x12d/0x190
path_setxattr+0x9f/0xb0
SyS_setxattr+0x14/0x20
Fix this one by using ocfs2_inode_{lock|unlock}_tracker, which is
exported by commit
439a36b8ef38 ("ocfs2/dlmglue: prepare tracking logic
to avoid recursive cluster lock").
Link: http://lkml.kernel.org/r/20170622014746.5815-1-zren@suse.com
Fixes:
743b5f1434f5 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()")
Signed-off-by: Eric Ren <zren@suse.com>
Reported-by: Thomas Voegtle <tv@lio96.de>
Tested-by: Thomas Voegtle <tv@lio96.de>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Fri, 23 Jun 2017 22:08:52 +0000 (15:08 -0700)]
slub: make sysfs file removal asynchronous
Commit
bf5eb3de3847 ("slub: separate out sysfs_slab_release() from
sysfs_slab_remove()") made slub sysfs file removals synchronous to
kmem_cache shutdown.
Unfortunately, this created a possible ABBA deadlock between slab_mutex
and sysfs draining mechanism triggering the following lockdep warning.
======================================================
[ INFO: possible circular locking dependency detected ]
4.10.0-test+ #48 Not tainted
-------------------------------------------------------
rmmod/1211 is trying to acquire lock:
(s_active#120){++++.+}, at: [<
ffffffff81308073>] kernfs_remove+0x23/0x40
but task is already holding lock:
(slab_mutex){+.+.+.}, at: [<
ffffffff8120f691>] kmem_cache_destroy+0x41/0x2d0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (slab_mutex){+.+.+.}:
lock_acquire+0xf6/0x1f0
__mutex_lock+0x75/0x950
mutex_lock_nested+0x1b/0x20
slab_attr_store+0x75/0xd0
sysfs_kf_write+0x45/0x60
kernfs_fop_write+0x13c/0x1c0
__vfs_write+0x28/0x120
vfs_write+0xc8/0x1e0
SyS_write+0x49/0xa0
entry_SYSCALL_64_fastpath+0x1f/0xc2
-> #0 (s_active#120){++++.+}:
__lock_acquire+0x10ed/0x1260
lock_acquire+0xf6/0x1f0
__kernfs_remove+0x254/0x320
kernfs_remove+0x23/0x40
sysfs_remove_dir+0x51/0x80
kobject_del+0x18/0x50
__kmem_cache_shutdown+0x3e6/0x460
kmem_cache_destroy+0x1fb/0x2d0
kvm_exit+0x2d/0x80 [kvm]
vmx_exit+0x19/0xa1b [kvm_intel]
SyS_delete_module+0x198/0x1f0
entry_SYSCALL_64_fastpath+0x1f/0xc2
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(slab_mutex);
lock(s_active#120);
lock(slab_mutex);
lock(s_active#120);
*** DEADLOCK ***
2 locks held by rmmod/1211:
#0: (cpu_hotplug.dep_map){++++++}, at: [<
ffffffff810a7877>] get_online_cpus+0x37/0x80
#1: (slab_mutex){+.+.+.}, at: [<
ffffffff8120f691>] kmem_cache_destroy+0x41/0x2d0
stack backtrace:
CPU: 3 PID: 1211 Comm: rmmod Not tainted 4.10.0-test+ #48
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
Call Trace:
print_circular_bug+0x1be/0x210
__lock_acquire+0x10ed/0x1260
lock_acquire+0xf6/0x1f0
__kernfs_remove+0x254/0x320
kernfs_remove+0x23/0x40
sysfs_remove_dir+0x51/0x80
kobject_del+0x18/0x50
__kmem_cache_shutdown+0x3e6/0x460
kmem_cache_destroy+0x1fb/0x2d0
kvm_exit+0x2d/0x80 [kvm]
vmx_exit+0x19/0xa1b [kvm_intel]
SyS_delete_module+0x198/0x1f0
? SyS_delete_module+0x5/0x1f0
entry_SYSCALL_64_fastpath+0x1f/0xc2
It'd be the cleanest to deal with the issue by removing sysfs files
without holding slab_mutex before the rest of shutdown; however, given
the current code structure, it is pretty difficult to do so.
This patch punts sysfs file removal to a work item. Before commit
bf5eb3de3847, the removal was punted to a RCU delayed work item which is
executed after release. Now, we're punting to a different work item on
shutdown which still maintains the goal removing the sysfs files earlier
when destroying kmem_caches.
Link: http://lkml.kernel.org/r/20170620204512.GI21326@htj.duckdns.org
Fixes:
bf5eb3de3847 ("slub: separate out sysfs_slab_release() from sysfs_slab_remove()")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ilya Matveychikov [Fri, 23 Jun 2017 22:08:49 +0000 (15:08 -0700)]
lib/cmdline.c: fix get_options() overflow while parsing ranges
When using get_options() it's possible to specify a range of numbers,
like 1-100500. The problem is that it doesn't track array size while
calling internally to get_range() which iterates over the range and
fills the memory with numbers.
Link: http://lkml.kernel.org/r/2613C75C-B04D-4BFF-82A6-12F97BA0F620@gmail.com
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Fri, 23 Jun 2017 22:08:46 +0000 (15:08 -0700)]
fs/dax.c: fix inefficiency in dax_writeback_mapping_range()
dax_writeback_mapping_range() fails to update iteration index when
searching radix tree for entries needing cache flushing. Thus each
pagevec worth of entries is searched starting from the start which is
inefficient and prone to livelocks. Update index properly.
Link: http://lkml.kernel.org/r/20170619124531.21491-1-jack@suse.cz
Fixes:
9973c98ecfda3 ("dax: add support for fsync/sync")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NeilBrown [Fri, 23 Jun 2017 22:08:43 +0000 (15:08 -0700)]
autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL
If a positive status is passed with the AUTOFS_DEV_IOCTL_FAIL ioctl,
autofs4_d_automount() will return
ERR_PTR(status)
with that status to follow_automount(), which will then dereference an
invalid pointer.
So treat a positive status the same as zero, and map to ENOENT.
See comment in systemd src/core/automount.c::automount_send_ready().
Link: http://lkml.kernel.org/r/871sqwczx5.fsf@notabene.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.com>
Cc: Ian Kent <raven@themaw.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ard Biesheuvel [Fri, 23 Jun 2017 22:08:41 +0000 (15:08 -0700)]
mm/vmalloc.c: huge-vmap: fail gracefully on unexpected huge vmap mappings
Existing code that uses vmalloc_to_page() may assume that any address
for which is_vmalloc_addr() returns true may be passed into
vmalloc_to_page() to retrieve the associated struct page.
This is not un unreasonable assumption to make, but on architectures
that have CONFIG_HAVE_ARCH_HUGE_VMAP=y, it no longer holds, and we need
to ensure that vmalloc_to_page() does not go off into the weeds trying
to dereference huge PUDs or PMDs as table entries.
Given that vmalloc() and vmap() themselves never create huge mappings or
deal with compound pages at all, there is no correct answer in this
case, so return NULL instead, and issue a warning.
When reading /proc/kcore on arm64, you will hit an oops as soon as you
hit the huge mappings used for the various segments that make up the
mapping of vmlinux. With this patch applied, you will no longer hit the
oops, but the kcore contents willl be incorrect (these regions will be
zeroed out)
We are fixing this for kcore specifically, so it avoids vread() for
those regions. At least one other problematic user exists, i.e.,
/dev/kmem, but that is currently broken on arm64 for other reasons.
Link: http://lkml.kernel.org/r/20170609082226.26152-1-ard.biesheuvel@linaro.org
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: zhong jiang <zhongjiang@huawei.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Fri, 23 Jun 2017 22:08:38 +0000 (15:08 -0700)]
mm, thp: remove cond_resched from __collapse_huge_page_copy
This is a partial revert of commit
338a16ba1549 ("mm, thp: copying user
pages must schedule on collapse") which added a cond_resched() to
__collapse_huge_page_copy().
On x86 with CONFIG_HIGHPTE, __collapse_huge_page_copy is called in
atomic context and thus scheduling is not possible. This is only a
possible config on arm and i386.
Although need_resched has been shown to be set for over 100 jiffies
while doing the iteration in __collapse_huge_page_copy, this is better
than doing
if (in_atomic())
cond_resched()
to cover only non-CONFIG_HIGHPTE configs.
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1706191341550.97821@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 23 Jun 2017 19:25:37 +0000 (12:25 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two fixes to remove spurious WARN_ONs from the new(ish) qedi driver.
The driver already prints a warning message, there's no need to panic
users by printing something that looks like an oops as well"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qedi: Remove WARN_ON from clear task context.
scsi: qedi: Remove WARN_ON for untracked cleanup.
Linus Torvalds [Fri, 23 Jun 2017 19:23:06 +0000 (12:23 -0700)]
Merge tag 'xfs-4.12-fixes-5' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"I have one more bugfix for you for 4.12-rc7 to fix a disk corruption
problem:
- don't allow swapon on files on the realtime device, because the
swap code will swap pages out to blocks on the data device, thereby
corrupting the filesystem"
* tag 'xfs-4.12-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't allow bmap on rt files
David S. Miller [Fri, 23 Jun 2017 18:48:28 +0000 (14:48 -0400)]
Merge branch 'bnxt_en-fixes'
Michael Chan says:
====================
bnxt_en: Error handling and netpoll fixes.
Add missing error handling and fix netpoll handling. The current code
handles RX and TX events in netpoll mode and is causing lots of warnings
and errors in the RX code path in netpoll mode. The fix is to only handle
TX events in netpoll mode.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Fri, 23 Jun 2017 18:01:01 +0000 (14:01 -0400)]
bnxt_en: Fix netpoll handling.
To handle netpoll properly, the driver must only handle TX packets
during NAPI. Handling RX events cause warnings and errors in
netpoll mode. The ndo_poll_controller() method should call
napi_schedule() directly so that a NAPI weight of zero will be used
during netpoll mode.
The bnxt_en driver supports 2 ring modes: combined, and separate rx/tx.
In separate rx/tx mode, the ndo_poll_controller() method will only
process the tx rings. In combined mode, the rx and tx completion
entries are mixed in the completion ring and we need to drop the rx
entries and recycle the rx buffers.
Add a function bnxt_force_rx_discard() to handle this in netpoll mode
when we see rx entries in combined ring mode.
Reported-by: Calvin Owens <calvinowens@fb.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Fri, 23 Jun 2017 18:01:00 +0000 (14:01 -0400)]
bnxt_en: Add missing logic to handle TPA end error conditions.
When we get a TPA_END completion to handle a completed LRO packet, it
is possible that hardware would indicate errors. The current code is
not checking for the error condition. Define the proper error bits and
the macro to check for this error and abort properly.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Fri, 23 Jun 2017 15:51:31 +0000 (17:51 +0200)]
net: dp83640: Avoid NULL pointer dereference.
The function, skb_complete_tx_timestamp(), used to allow passing in a
NULL pointer for the time stamps, but that was changed in commit
62bccb8cdb69051b95a55ab0c489e3cab261c8ef ("net-timestamp: Make the
clone operation stand-alone from phy timestamping"), and the existing
call sites, all of which are in the dp83640 driver, were fixed up.
Even though the kernel-doc was subsequently updated in commit
7a76a021cd5a292be875fbc616daf03eab1e6996 ("net-timestamp: Update
skb_complete_tx_timestamp comment"), still a bug fix from Manfred
Rudigier came into the driver using the old semantics. Probably
Manfred derived that patch from an older kernel version.
This fix should be applied to the stable trees as well.
Fixes:
81e8f2e930fe ("net: dp83640: Fix tx timestamp overflow handling.")
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 23 Jun 2017 18:11:26 +0000 (14:11 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2017-06-23
1) Fix xfrm garbage collecting when unregistering a netdevice.
From Hangbin Liu.
2) Fix NULL pointer derefernce when exiting a network namespace.
From Hangbin Liu.
3) Fix some error codes in pfkey to prevent a NULL pointer derefernce.
From Dan Carpenter.
4) Fix NULL pointer derefernce on allocation failure in pfkey.
From Dan Carpenter.
5) Adjust IPv6 payload_len to include extension headers. Otherwise
we corrupt the packets when doing ESP GRO on transport mode.
From Yossi Kuperman.
6) Set nhoff to the proper offset of the IPv6 nexthdr when doing ESP GRO.
From Yossi Kuperman.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Thu, 22 Jun 2017 22:29:33 +0000 (15:29 -0700)]
sit: use __GFP_NOWARN for user controlled allocation
The memory allocation size is controlled by user-space,
if it is too large just fail silently and return NULL,
not to mention there is a fallback allocation later.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubeček [Mon, 19 Jun 2017 11:03:43 +0000 (13:03 +0200)]
net: account for current skb length when deciding about UFO
Our customer encountered stuck NFS writes for blocks starting at specific
offsets w.r.t. page boundary caused by networking stack sending packets via
UFO enabled device with wrong checksum. The problem can be reproduced by
composing a long UDP datagram from multiple parts using MSG_MORE flag:
sendto(sd, buff, 1000, MSG_MORE, ...);
sendto(sd, buff, 1000, MSG_MORE, ...);
sendto(sd, buff, 3000, 0, ...);
Assume this packet is to be routed via a device with MTU 1500 and
NETIF_F_UFO enabled. When second sendto() gets into __ip_append_data(),
this condition is tested (among others) to decide whether to call
ip_ufo_append_data():
((length + fragheaderlen) > mtu) || (skb && skb_is_gso(skb))
At the moment, we already have skb with 1028 bytes of data which is not
marked for GSO so that the test is false (fragheaderlen is usually 20).
Thus we append second 1000 bytes to this skb without invoking UFO. Third
sendto(), however, has sufficient length to trigger the UFO path so that we
end up with non-UFO skb followed by a UFO one. Later on, udp_send_skb()
uses udp_csum() to calculate the checksum but that assumes all fragments
have correct checksum in skb->csum which is not true for UFO fragments.
When checking against MTU, we need to add skb->len to length of new segment
if we already have a partially filled skb and fragheaderlen only if there
isn't one.
In the IPv6 case, skb can only be null if this is the first segment so that
we have to use headersize (length of the first IPv6 header) rather than
fragheaderlen (length of IPv6 header of further fragments) for skb == NULL.
Fixes:
e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach")
Fixes:
e4c5e13aa45c ("ipv6: Should use consistent conditional judgement for
ip6 fragment between __ip6_append_data and ip6_finish_output")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heinz Mauelshagen [Fri, 23 Jun 2017 15:27:01 +0000 (17:27 +0200)]
dm raid: fix oops on upgrading to extended superblock format
When a RAID set was created on dm-raid version < 1.9.0 (old RAID
superblock format), all of the new 1.9.0 members of the superblock are
uninitialized (zero) -- including the device sectors member needed to
support shrinking.
All the other accesses to superblock fields new in 1.9.0 were reviewed
and verified to be properly guarded against invalid use. The 'sectors'
member was the only one used when the superblock version is < 1.9.
Don't access the superblock's >= 1.9.0 'sectors' member unconditionally.
Also add respective comments.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Ingo Molnar [Fri, 23 Jun 2017 08:03:27 +0000 (10:03 +0200)]
Merge tag 'perf-urgent-for-mingo-4.12-
20170622' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull 'perf probe' fix from Arnaldo Carvalho de Melo:
- Do not double the offset of inline expansions when using
'perf probe' on inlined functions (Björn Töpel)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andrew Duggan [Fri, 23 Jun 2017 07:04:51 +0000 (00:04 -0700)]
Input: synaptics-rmi4 - only read the F54 query registers which are used
The F54 driver is currently only using the first 6 bytes of F54 so there is
no need to read all 27 bytes. Some Dell systems (Dell XP13 9333 and
similar) have an issue with the touchpad or I2C bus when reading reports
larger then 16 bytes. Reads larger then 16 bytes are reported in two HID
reports. Something about the back to back reports seems to cause the next
read to report incorrect data. This results in F30 failing to load and the
click button failing to work.
Previous issues with the I2C controller or touchpad were addressed in:
commit
5b65c2a02966 ("HID: rmi: check sanity of the incoming report")
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=195949
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Nicholas Piggin [Wed, 21 Jun 2017 05:58:29 +0000 (15:58 +1000)]
powerpc/64: Initialise thread_info for emergency stacks
Emergency stacks have their thread_info mostly uninitialised, which in
particular means garbage preempt_count values.
Emergency stack code runs with interrupts disabled entirely, and is
used very rarely, so this has been unnoticed so far. It was found by a
proposed new powerpc watchdog that takes a soft-NMI directly from the
masked_interrupt handler and using the emergency stack. That crashed
at BUG_ON(in_nmi()) in nmi_enter(). preempt_count()s were found to be
garbage.
To fix this, zero the entire THREAD_SIZE allocation, and initialize
the thread_info.
Cc: stable@vger.kernel.org
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Move it all into setup_64.c, use a function not a macro. Fix
crashes on Cell by setting preempt_count to 0 not HARDIRQ_OFFSET]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Dave Airlie [Fri, 23 Jun 2017 01:44:51 +0000 (11:44 +1000)]
Merge tag 'drm-misc-fixes-2017-06-22' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes
UAPI Changes:
- drm: Fix regression in GETCONNECTOR ioctl returning stale properties (Daniel)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
* tag 'drm-misc-fixes-2017-06-22' of git://anongit.freedesktop.org/git/drm-misc:
drm: Fix GETCONNECTOR regression
Randy Dunlap [Tue, 23 May 2017 01:44:57 +0000 (18:44 -0700)]
kconfig: fix sparse warnings in nconfig
Fix sparse warnings in scripts/kconfig/nconf* ('make nconfig'):
../scripts/kconfig/nconf.c:1071:32: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:1238:30: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:511:51: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:1460:6: warning: symbol 'setup_windows' was not declared. Should it be static?
../scripts/kconfig/nconf.c:274:12: warning: symbol 'current_instructions' was not declared. Should it be static?
../scripts/kconfig/nconf.c:308:22: warning: symbol 'function_keys' was not declared. Should it be static?
../scripts/kconfig/nconf.gui.c:132:17: warning: non-ANSI function declaration of function 'set_colors'
../scripts/kconfig/nconf.gui.c:195:24: warning: Using plain integer as NULL pointer
nconf.gui.o before/after files are the same.
nconf.o before/after files are the same until the 'static' function
declarations are added.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Björn Töpel [Wed, 21 Jun 2017 16:41:34 +0000 (18:41 +0200)]
perf probe: Fix probe definition for inlined functions
In commit
613f050d68a8 ("perf probe: Fix to probe on gcc generated
functions in modules"), the offset from symbol is, incorrectly, added
to the trace point address. This leads to incorrect probe trace points
for inlined functions and when using relative line number on symbols.
Prior this patch:
$ perf probe -m nf_nat -D in_range
p:probe/in_range nf_nat:in_range.isra.9+0
$ perf probe -m i40e -D i40e_clean_rx_irq
p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+2212
$ perf probe -m i40e -D i40e_clean_rx_irq:16
p:probe/i40e_clean_rx_irq i40e:i40e_lan_xmit_frame+626
After:
$ perf probe -m nf_nat -D in_range
p:probe/in_range nf_nat:in_range.isra.9+0
$ perf probe -m i40e -D i40e_clean_rx_irq
p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+1106
$ perf probe -m i40e -D i40e_clean_rx_irq:16
p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+2665
Committer testing:
Using 'pfunct', a tool found in the 'dwarves' package [1], one can ask what are
the functions that while not being explicitely marked as inline, were inlined
by the compiler:
# pfunct --cc_inlined /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko | head
__ew32
e1000_regdump
e1000e_dump_ps_pages
e1000_desc_unused
e1000e_systim_to_hwtstamp
e1000e_rx_hwtstamp
e1000e_update_rdt_wa
e1000e_update_tdt_wa
e1000_put_txbuf
e1000_consume_page
Then ask 'perf probe' to produce the kprobe_tracer probe definitions for two of
them:
# perf probe -m e1000e -D e1000e_rx_hwtstamp
p:probe/e1000e_rx_hwtstamp e1000e:e1000_receive_skb+74
# perf probe -m e1000e -D e1000_consume_page
p:probe/e1000_consume_page e1000e:e1000_clean_jumbo_rx_irq+876
p:probe/e1000_consume_page_1 e1000e:e1000_clean_jumbo_rx_irq+1506
p:probe/e1000_consume_page_2 e1000e:e1000_clean_rx_irq_ps+1074
Now lets concentrate on the 'e1000_consume_page' one, that was inlined twice in
e1000_clean_jumbo_rx_irq(), lets see what readelf says about the DWARF tags for
that function:
$ readelf -wi /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
<SNIP>
<1><13e27b>: Abbrev Number: 121 (DW_TAG_subprogram)
<13e27c> DW_AT_name : (indirect string, offset: 0xa8945): e1000_clean_jumbo_rx_irq
<13e287> DW_AT_low_pc : 0x17a30
<3><13e6ef>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
<13e6f0> DW_AT_abstract_origin: <0x13ed2c>
<13e6f4> DW_AT_low_pc : 0x17be6
<SNIP>
<1><13ed2c>: Abbrev Number: 142 (DW_TAG_subprogram)
<13ed2e> DW_AT_name : (indirect string, offset: 0xa54c3): e1000_consume_page
So, the first time in e1000_clean_jumbo_rx_irq() where e1000_consume_page() is
inlined is at PC 0x17be6, which subtracted from e1000_clean_jumbo_rx_irq()'s
address, gives us the offset we should use in the probe definition:
0x17be6 - 0x17a30 = 438
but above we have 876, which is twice as much.
Lets see the second inline expansion of e1000_consume_page() in
e1000_clean_jumbo_rx_irq():
<3><13e86e>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
<13e86f> DW_AT_abstract_origin: <0x13ed2c>
<13e873> DW_AT_low_pc : 0x17d21
0x17d21 - 0x17a30 = 753
So we where adding it at twice the offset from the containing function as we
should.
And then after this patch:
# perf probe -m e1000e -D e1000e_rx_hwtstamp
p:probe/e1000e_rx_hwtstamp e1000e:e1000_receive_skb+37
# perf probe -m e1000e -D e1000_consume_page
p:probe/e1000_consume_page e1000e:e1000_clean_jumbo_rx_irq+438
p:probe/e1000_consume_page_1 e1000e:e1000_clean_jumbo_rx_irq+753
p:probe/e1000_consume_page_2 e1000e:e1000_clean_jumbo_rx_irq+1353
#
Which matches the two first expansions and shows that because we were
doubling the offset it would spill over the next function:
readelf -sw /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
673:
0000000000017a30 1626 FUNC LOCAL DEFAULT 2 e1000_clean_jumbo_rx_irq
674:
0000000000018090 2013 FUNC LOCAL DEFAULT 2 e1000_clean_rx_irq_ps
This is the 3rd inline expansion of e1000_consume_page() in
e1000_clean_jumbo_rx_irq():
<3><13ec77>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
<13ec78> DW_AT_abstract_origin: <0x13ed2c>
<13ec7c> DW_AT_low_pc : 0x17f79
0x17f79 - 0x17a30 = 1353
So:
0x17a30 + 2 * 1353 = 0x184c2
And:
0x184c2 - 0x18090 = 1074
Which explains the bogus third expansion for e1000_consume_page() to end up at:
p:probe/e1000_consume_page_2 e1000e:e1000_clean_rx_irq_ps+1074
All fixed now :-)
[1] https://git.kernel.org/pub/scm/devel/pahole/pahole.git/
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes:
613f050d68a8 ("perf probe: Fix to probe on gcc generated functions in modules")
Link: http://lkml.kernel.org/r/20170621164134.5701-1-bjorn.topel@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Thu, 22 Jun 2017 18:16:55 +0000 (11:16 -0700)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Various small fixes for stable"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Fix some return values in case of error in 'crypt_message'
cifs: remove redundant return in cifs_creation_time_get
CIFS: Improve readdir verbosity
CIFS: check if pages is null rather than bv for a failed allocation
CIFS: Set ->should_dirty in cifs_user_readv()
Linus Torvalds [Thu, 22 Jun 2017 18:03:09 +0000 (11:03 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"MIPS:
- Fix build with KVM, DYNAMIC_DEBUG and JUMP_LABEL.
PPC:
- Fix host crashes/hangs on POWER9.
- Properly restore userspace state after KVM_RUN ioctl.
s390:
- Fix address translation in odd-ball cases (real-space designation
ASCEs).
x86:
- Fix privilege escalation in 64-bit Windows guests
All patches are for stable and the x86 also has a CVE"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: fix singlestepping over syscall
KVM: s390: gaccess: fix real-space designation asce handling for gmap shadows
KVM: MIPS: Fix maybe-uninitialized build failure
KVM: PPC: Book3S HV: Ignore timebase offset on POWER9 DD1
KVM: PPC: Book3S HV: Save/restore host values of debug registers
KVM: PPC: Book3S HV: Preserve userspace HTM state properly
KVM: PPC: Book3S HV: Restore critical SPRs to host values on guest exit
KVM: PPC: Book3S HV: Context-switch EBB registers properly
KVM: PPC: Book3S HV: Cope with host using large decrementer mode
Linus Torvalds [Thu, 22 Jun 2017 17:47:29 +0000 (10:47 -0700)]
Merge tag 'mfd-fixes-4.12' of git://git./linux/kernel/git/lee/mfd
Pull MFD fixes from Lee Jones:
- arizona: use address passed in, rather than hard coded value
- correct STM32 clock-names value in DT binding documentation
* tag 'mfd-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
dt-bindings: mfd: Update STM32 timers clock names
mfd: arizona: Fix typo using hard-coded register
Martin Habets [Thu, 22 Jun 2017 09:50:41 +0000 (10:50 +0100)]
sfc: Fix MCDI command size for filter operations
The 8000 series adapters uses catch-all filters for encapsulated traffic
to support filtering VXLAN, NVGRE and GENEVE traffic.
This new filter functionality requires a longer MCDI command.
This patch increases the size of buffers on stack that were missed, which
fixes a kernel panic from the stack protector.
Fixes:
9b41080125176 ("sfc: insert catch-all filters for encapsulated traffic")
Signed-off-by: Martin Habets <mhabets@solarflare.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Acked-by: Bert Kenward bkenward@solarflare.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 21 Jun 2017 22:16:37 +0000 (00:16 +0200)]
netvsc: don't access netdev->num_rx_queues directly
This structure member is hidden behind CONFIG_SYSFS, and we
get a build error when that is disabled:
drivers/net/hyperv/netvsc_drv.c: In function 'netvsc_set_channels':
drivers/net/hyperv/netvsc_drv.c:754:49: error: 'struct net_device' has no member named 'num_rx_queues'; did you mean 'num_tx_queues'?
drivers/net/hyperv/netvsc_drv.c: In function 'netvsc_set_rxfh':
drivers/net/hyperv/netvsc_drv.c:1181:25: error: 'struct net_device' has no member named 'num_rx_queues'; did you mean 'num_tx_queues'?
As the value is only set once to the argument of alloc_netdev_mq(),
we can compare against that constant directly.
Fixes:
ff4a44199012 ("netvsc: allow get/set of RSS indirection table")
Fixes:
2b01888d1b45 ("netvsc: allow more flexible setting of number of channels")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Wed, 21 Jun 2017 21:34:58 +0000 (14:34 -0700)]
ipv6: avoid unregistering inet6_dev for loopback
The per netns loopback_dev->ip6_ptr is unregistered and set to
NULL when its mtu is set to smaller than IPV6_MIN_MTU, this
leads to that we could set rt->rt6i_idev NULL after a
rt6_uncached_list_flush_dev() and then crash after another
call.
In this case we should just bring its inet6_dev down, rather
than unregistering it, at least prior to commit
176c39af29bc
("netns: fix addrconf_ifdown kernel panic") we always
override the case for loopback.
Thanks a lot to Andrey for finding a reliable reproducer.
Fixes:
176c39af29bc ("netns: fix addrconf_ifdown kernel panic")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Daniel Lezcano <dlezcano@fr.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 22 Jun 2017 15:17:43 +0000 (11:17 -0400)]
Merge branch 'macvlan-Fix-some-issues-with-changing-mac-addresses'
Vladislav Yasevich says:
====================
macvlan: Fix some issues with changing mac addresses
There are some issues in macvlan wrt to changing it's mac address.
* An error is returned in the specified address is the same as an already
assigned address.
* In passthru mode, the mac address of the macvlan device doesn't change.
* After changing the mac address of a passthru macvlan and then removing it,
the mac address of the physical device remains changed.
This patch series attempts to resolve these issues.
V2: Address a small issue in p4 where we save the address from the lowerdev
(from girish.moodalbail@oracle.com)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Wed, 21 Jun 2017 11:59:19 +0000 (07:59 -0400)]
macvlan: Let passthru macvlan correctly restore lower mac address
Passthru macvlans directly change the mac address of the lower
level device. That's OK, but after the macvlan is deleted,
the lower device is left with changed address and one needs to
reboot to bring back the origina HW addresses.
This scenario is actually quite common with passthru macvtap devices.
This patch attempts to solve this, by storing the mac address
of the lower device in macvlan_port structure and keeping track of
it through the changes.
After this patch, any changes to the lower device mac address
done trough the macvlan device, will be reverted back. Any
changs done directly to the lower device mac address will be kept.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Wed, 21 Jun 2017 11:59:18 +0000 (07:59 -0400)]
macvlan: convert port passthru to flags.
Convert the port passthru boolean into flags with accesor functions.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Wed, 21 Jun 2017 11:59:17 +0000 (07:59 -0400)]
macvlan: Fix passthru macvlan mac address inheritance
When a lower device of the passthru macvlan changes it's address,
passthru macvlan is supposed to change it's own address as well.
However, that doesn't happen correctly because the check in
macvlan_addr_busy() will catch the fact that the lower level
(port) mac address is the same as the address we are trying to
assign to the macvlan, and return an error. As a reasult,
the address of the passthru macvlan device is never changed.
The same thing happens when the user attempts to change the
mac address of the passthru macvlan.
The simple solution appers to be to not check against
the lower device in case of passthru macvlan device, since
the 2 addresses are _supposed_ to be the same.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Wed, 21 Jun 2017 11:59:16 +0000 (07:59 -0400)]
macvlan: Do not return error when setting the same mac address
The user currently gets an EBUSY error when attempting to set
the mac address on a macvlan device to the same value.
This should really be a no-op as nothing changes. Catch
the condition and return early.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Liu [Wed, 21 Jun 2017 09:21:22 +0000 (10:21 +0100)]
xen-netback: correctly schedule rate-limited queues
Add a flag to indicate if a queue is rate-limited. Test the flag in
NAPI poll handler and avoid rescheduling the queue if true, otherwise
we risk locking up the host. The rescheduling will be done in the
timer callback function.
Reported-by: Jean-Louis Dupond <jean-louis@dupond.be>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Jean-Louis Dupond <jean-louis@dupond.be>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>