dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl

Add pinctrl bindings for StarFive JH7110 SoC sys pinctrl controller.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230209143702.44408-2-hal.feng@starfivetech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: riscv: Add StarFive JH7110 SoC and VisionFive 2 board

Add device tree bindings for the StarFive JH7110 RISC-V SoC
and the VisionFive 2 board equipped with it.

VisionFive 2 board has version A and version B, which are
different in gmac and phy chip. The version A board has one
1000Mbps and one 100Mbps Ethernet ports while the version B
board has two 1000Mbps Ethernet ports.

Link: https://doc-en.rvspace.org/Doc_Center/jh7110.html
Link: https://doc-en.rvspace.org/Doc_Center/visionfive_2.html
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

dt-bindings: sifive,ccache0: Support StarFive JH7110 SoC

This cache controller is also used on the StarFive JH7110 SoC.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

soc: starfive: Add StarFive JH71XX pmu driver

Add pmu driver for the StarFive JH71XX SoC.

As the power domains provider, the Power Management Unit (PMU) is
designed for including multiple PM domains that can be used for power
gating of selected IP blocks for power saving by reduced leakage
current. It accepts software encourage command to switch the power mode
of SoC.

Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

dt-bindings: power: Add starfive,jh7110-pmu

Add bindings for the Power Management Unit on the StarFive JH7110 SoC.

Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

Linux 6.1.21

Link: https://lore.kernel.org/r/20230320145507.420176832@linuxfoundation.org
Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230321080705.245176209@linuxfoundation.org
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>
Tested-by: Slade Watkins <srw@sladewatkins.net>
Link: https://lore.kernel.org/r/20230321180747.474321236@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64: Replace -mcpu=e500mc64 by -mcpu=e5500

commit 77e82fa1f9781a958a6ea4aed7aec41239a5a22f upstream.

E500MC64 is a processor pre-dating E5500 that has never been
commercialised. Use -mcpu=e5500 for E5500 core.

More details at https://gcc.gnu.org/PR108149

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fa71ed20d22c156225436374f0ab847daac893bc.1671475543.git.christophe.leroy@csgroup.eu
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Disable CPU unknown by CLANG when CC_IS_CLANG

commit 4b10306e98456aed03cad75ce467e8b1efdccca0 upstream.

CLANG only knows the following CPUs:

generic, 440, 450, 601, 602, 603, 603e, 603ev, 604, 604e, 620, 630,
g3, 7400, g4, 7450, g4+, 750, 8548, 970, g5, a2, e500, e500mc, e5500,
power3, pwr3, power4, pwr4, power5, pwr5, power5x, pwr5x, power6,
pwr6, power6x, pwr6x, power7, pwr7, power8, pwr8, power9, pwr9,
power10, pwr10, powerpc, ppc, ppc32, powerpc64, ppc64, powerpc64le,
ppc64le, futur

Disable other ones when CC_IS_CLANG.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e62892e32c14a7a5738c597e39e0082cb0abf21c.1675335659.git.christophe.leroy@csgroup.eu
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Fix check before add_event_to_groups() in perf_group_detach()

commit fd0815f632c24878e325821943edccc7fde947a2 upstream.

Events should only be added to a groups rb tree if they have not been
removed from their context by list_del_event(). Since remove_on_exec
made it possible to call list_del_event() on individual events before
they are detached from their group, perf_group_detach() should check each
sibling's attach_state before calling add_event_to_groups() on it.

Fixes: 2e498d0a74e5 ("perf: Add support for event removal on exec")
Signed-off-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/ZBFzvQV9tEqoHEtH@gentoo
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring/msg_ring: let target know allocated index

commit 5da28edd7bd5518f97175ecea77615bb729a7a28 upstream.

msg_ring requests transferring files support auto index selection via
IORING_FILE_INDEX_ALLOC, however they don't return the selected index
to the target ring and there is no other good way for the userspace to
know where is the receieved file.

Return the index for allocated slots and 0 otherwise, which is
consistent with other fixed file installing requests.

Cc: stable@vger.kernel.org # v6.0+
Fixes: e6130eba8a848 ("io_uring: add support for passing fixed file descriptors")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://github.com/axboe/liburing/issues/809
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virt/coco/sev-guest: Add throttling awareness

commit 72f7754dcf31c87c92c0c353dcf747814cc5ce10 upstream.

A potentially malicious SEV guest can constantly hammer the hypervisor
using this driver to send down requests and thus prevent or at least
considerably hinder other guests from issuing requests to the secure
processor which is a shared platform resource.

Therefore, the host is permitted and encouraged to throttle such guest
requests.

Add the capability to handle the case when the hypervisor throttles
excessive numbers of requests issued by the guest. Otherwise, the VM
platform communication key will be disabled, preventing the guest from
attesting itself.

Realistically speaking, a well-behaved guest should not even care about
throttling. During its lifetime, it would end up issuing a handful of
requests which the hardware can easily handle.

This is more to address the case of a malicious guest. Such guest should
get throttled and if its VMPCK gets disabled, then that's its own
wrongdoing and perhaps that guest even deserves it.

To the implementation: the hypervisor signals with SNP_GUEST_REQ_ERR_BUSY
that the guest requests should be throttled. That error code is returned
in the upper 32-bit half of exitinfo2 and this is part of the GHCB spec
v2.

So the guest is given a throttling period of 1 minute in which it
retries the request every 2 seconds. This is a good default but if it
turns out to not pan out in practice, it can be tweaked later.

For safety, since the encryption algorithm in GHCBv2 is AES_GCM, control
must remain in the kernel to complete the request with the current
sequence number. Returning without finishing the request allows the
guest to make another request but with different message contents. This
is IV reuse, and breaks cryptographic protections.

  [ bp:
    - Rewrite commit message and do a simplified version.
    - The stable tags are supposed to denote that a cleanup should go
      upfront before backporting this so that any future fixes to this
      can preserve the sanity of the backporter(s). ]

Fixes: d5af44dde546 ("x86/sev: Provide support for SNP guest request NAEs")
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@kernel.org> # d6fd48eff750 ("virt/coco/sev-guest: Check SEV_SNP attribute at probe time")
Cc: <stable@kernel.org> # 970ab823743f (" virt/coco/sev-guest: Simplify extended guest request handling")
Cc: <stable@kernel.org> # c5a338274bdb ("virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()")
Cc: <stable@kernel.org> # 0fdb6cc7c89c ("virt/coco/sev-guest: Carve out the request issuing logic into a helper")
Cc: <stable@kernel.org> # d25bae7dc7b0 ("virt/coco/sev-guest: Do some code style cleanups")
Cc: <stable@kernel.org> # fa4ae42cc60a ("virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case")
Link: https://lore.kernel.org/r/20230214164638.1189804-2-dionnaglaze@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case

commit fa4ae42cc60a7dea30e8f2db444b808d80862345 upstream.

snp_issue_guest_request() checks the value returned by the hypervisor in
sw_exit_info_2 and returns a different error depending on it.

Convert those checks into a switch-case to make it more readable when
more error values are going to be checked in the future.

No functional changes.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-8-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virt/coco/sev-guest: Do some code style cleanups

commit d25bae7dc7b0668cb2a1325c64eb32d5fea4e5a9 upstream.

Remove unnecessary linebreaks, make the code more compact.

No functional changes.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-7-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virt/coco/sev-guest: Carve out the request issuing logic into a helper

commit 0fdb6cc7c89cb5e0cbc45dbdbafb8e3fb92ddc95 upstream.

This makes the code flow a lot easier to follow.

No functional changes.

  [ Tom: touchups. ]

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230307192449.24732-6-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()

commit c5a338274bdb894f088767bea856be344d0ccaef upstream.

Call the function directly instead.

No functional changes.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-5-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virt/coco/sev-guest: Simplify extended guest request handling

commit 970ab823743fb54b42002ec76c51481f67436444 upstream.

Return a specific error code - -ENOSPC - to signal the too small cert
data buffer instead of checking exit code and exitinfo2.

While at it, hoist the *fw_err assignment in snp_issue_guest_request()
so that a proper error value is returned to the callers.

  [ Tom: check override_err instead of err. ]

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230307192449.24732-4-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virt/coco/sev-guest: Check SEV_SNP attribute at probe time

commit d6fd48eff7506bb866a54e40369df8899f2078a9 upstream.

No need to check it on every ioctl. And yes, this is a common SEV driver
but it does only SNP-specific operations currently. This can be
revisited later, when more use cases appear.

No functional changes.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-3-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Pass correct CPU reference to assembler

commit bfb03af71a3798b5a88a945a9c19ad67e1c4986d upstream.

Jan-Benedict reported issue with building ppc64e_defconfig
with mainline GCC work:

  powerpc64-linux-gcc -Wp,-MMD,arch/powerpc/kernel/vdso/.gettimeofday-64.o.d -nostdinc -I./arch/powerpc/include -I./arch/powerpc/include/generated  -I./include -I./arch/powerpc/include/uapi -I./arch/powerpc/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/compiler-version.h -include ./include/linux/kconfig.h -D__KERNEL__ -I ./arch/powerpc -DHAVE_AS_ATHIGH=1 -fmacro-prefix-map=./= -D__ASSEMBLY__ -fno-PIE -m64 -Wl,-a64 -mabi=elfv1 -Wa,-me500 -Wa,-me500mc -mabi=elfv1 -mbig-endian    -Wl,-soname=linux-vdso64.so.1 -D__VDSO64__ -s -c -o arch/powerpc/kernel/vdso/gettimeofday-64.o arch/powerpc/kernel/vdso/gettimeofday.S
arch/powerpc/kernel/vdso/gettimeofday.S: Assembler messages:
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `stdu'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `stdu'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `std'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `std'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `ld'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `ld'
...
make[1]: *** [arch/powerpc/kernel/vdso/Makefile:76: arch/powerpc/kernel/vdso/gettimeofday-64.o] Error 1
make: *** [arch/powerpc/Makefile:387: vdso_prepare] Error 2

This is due to assembler being called with -me500mc which is
a 32 bits target.

The problem comes from the fact that CONFIG_PPC_E500MC is selected for
both the e500mc (32 bits) and the e5500 (64 bits), and therefore the
following makefile rule is wrong:

  cpu-as-$(CONFIG_PPC_E500MC)    += $(call as-option,-Wa$(comma)-me500mc)

Today we have CONFIG_TARGET_CPU which provides the identification of the
expected CPU, it is used for GCC. Once GCC knows the target CPU, it adds
the correct CPU option to assembler, no need to add it explicitly.

With that change (And also commit 45f7091aac35 ("powerpc/64: Set default
CPU in Kconfig")), it now is:

  powerpc64-linux-gcc -Wp,-MMD,arch/powerpc/kernel/vdso/.gettimeofday-64.o.d -nostdinc -I./arch/powerpc/include -I./arch/powerpc/include/generated  -I./include -I./arch/powerpc/include/uapi -I./arch/powerpc/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/compiler-version.h -include ./include/linux/kconfig.h -D__KERNEL__ -I ./arch/powerpc -DHAVE_AS_ATHIGH=1 -fmacro-prefix-map=./= -D__ASSEMBLY__ -fno-PIE -m64 -Wl,-a64 -mabi=elfv1 -mcpu=e500mc64 -mabi=elfv1 -mbig-endian    -Wl,-soname=linux-vdso64.so.1 -D__VDSO64__ -s -c -o arch/powerpc/kernel/vdso/gettimeofday-64.o arch/powerpc/kernel/vdso/gettimeofday.S

Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Pali Rohár <pali@kernel.org>
[mpe: Retain -Wa,-mpower4 -Wa,-many for Book3S 64 builds for now]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/758ad54128fa9dd2fdedc4c511592111cbded900.1671475543.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/resctrl: Clear staged_config[] before and after it is used

commit 0424a7dfe9129b93f29b277511a60e87f052ac6b upstream.

As a temporary storage, staged_config[] in rdt_domain should be cleared
before and after it is used. The stale value in staged_config[] could
cause an MSR access error.

Here is a reproducer on a system with 16 usable CLOSIDs for a 15-way L3
Cache (MBA should be disabled if the number of CLOSIDs for MB is less than
16.) :
mount -t resctrl resctrl -o cdp /sys/fs/resctrl
mkdir /sys/fs/resctrl/p{1..7}
umount /sys/fs/resctrl/
mount -t resctrl resctrl /sys/fs/resctrl
mkdir /sys/fs/resctrl/p{1..8}

An error occurs when creating resource group named p8:
    unchecked MSR access error: WRMSR to 0xca0 (tried to write 0x00000000000007ff) at rIP: 0xffffffff82249142 (cat_wrmsr+0x32/0x60)
    Call Trace:
     <IRQ>
     __flush_smp_call_function_queue+0x11d/0x170
     __sysvec_call_function+0x24/0xd0
     sysvec_call_function+0x89/0xc0
     </IRQ>
     <TASK>
     asm_sysvec_call_function+0x16/0x20

When creating a new resource control group, hardware will be configured
by the following process:
    rdtgroup_mkdir()
      rdtgroup_mkdir_ctrl_mon()
        rdtgroup_init_alloc()
          resctrl_arch_update_domains()

resctrl_arch_update_domains() iterates and updates all resctrl_conf_type
whose have_new_ctrl is true. Since staged_config[] holds the same values as
when CDP was enabled, it will continue to update the CDP_CODE and CDP_DATA
configurations. When group p8 is created, get_config_index() called in
resctrl_arch_update_domains() will return 16 and 17 as the CLOSIDs for
CDP_CODE and CDP_DATA, which will be translated to an invalid register -
0xca0 in this scenario.

Fix it by clearing staged_config[] before and after it is used.

[reinette: re-order commit tags]

Fixes: 75408e43509e ("x86/resctrl: Allow different CODE/DATA configurations to be staged")
Suggested-by: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Shawn Wang <shawnwang@linux.alibaba.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/2fad13f49fbe89687fc40e9a5a61f23a28d1507a.1673988935.git.reinette.chatre%40intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Fix use of uninitialized buffer in sme_enable()

commit cbebd68f59f03633469f3ecf9bea99cd6cce3854 upstream.

cmdline_find_option() may fail before doing any initialization of
the buffer array. This may lead to unpredictable results when the same
buffer is used later in calls to strncmp() function.  Fix the issue by
returning early if cmdline_find_option() returns an error.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: aca20d546214 ("x86/mm: Add support to make use of Secure Memory Encryption")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230306160656.14844-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mce: Make sure logged MCEs are processed after sysfs update

commit 4783b9cb374af02d49740e00e2da19fd4ed6dec4 upstream.

A recent change introduced a flag to queue up errors found during
boot-time polling. These errors will be processed during late init once
the MCE subsystem is fully set up.

A number of sysfs updates call mce_restart() which goes through a subset
of the CPU init flow. This includes polling MCA banks and logging any
errors found. Since the same function is used as boot-time polling,
errors will be queued. However, the system is now past late init, so the
errors will remain queued until another error is found and the workqueue
is triggered.

Call mce_schedule_work() at the end of mce_restart() so that queued
errors are processed.

Fixes: 3bff147b187d ("x86/mce: Defer processing of early errors")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230301221420.2203184-1-yazen.ghannam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: qcom: q6prm: fix incorrect clk_root passed to ADSP

commit 65882134bc622a1e57bd5928ac588855ea2e3ddd upstream.

The second to last argument is clk_root (root of the clock), however the
code called q6prm_request_lpass_clock() with clk_attr instead
(copy-paste error).  This effectively was passing value of 1 as root
clock which worked on some of the SoCs (e.g. SM8450) but fails on
others, depending on the ADSP.  For example on SM8550 this "1" as root
clock is not accepted and results in errors coming from ADSP.

Fixes: 2f20640491ed ("ASoC: qdsp6: qdsp6: q6prm: handle clk disable correctly")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230302122908.221398-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: soc-acpi: fix copy-paste issue in topology names

commit 858a438a6cf919e5727d2a0f5f3f0e68b2d5354e upstream.

For some reason the convention for topology names was not followed and
the name inspired by another unrelated hardware configuration. As a
result, the kernel will request a non-existent topology file.

Link: https://github.com/thesofproject/sof/pull/6878
Fixes: 2ec8b081d59f ("ASoC: Intel: soc-acpi: Add entry for sof_es8336 in ADL match table")
Cc: stable@vger.kernel.org
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307100733.15025-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpuidle: psci: Iterate backwards over list in psci_pd_remove()

commit 6b0313c2fa3d2cf991c9ffef6fae6e7ef592ce6d upstream.

In case that psci_pd_init_topology() fails for some reason,
psci_pd_remove() will be responsible for deleting provider and removing
genpd from psci_pd_providers list.  There will be a failure when removing
the cluster PD, because the cpu (child) PDs haven't been removed.

[    0.050232] CPUidle PSCI: init PM domain cpu0
[    0.050278] CPUidle PSCI: init PM domain cpu1
[    0.050329] CPUidle PSCI: init PM domain cpu2
[    0.050370] CPUidle PSCI: init PM domain cpu3
[    0.050422] CPUidle PSCI: init PM domain cpu-cluster0
[    0.050475] PM: genpd_remove: unable to remove cpu-cluster0
[    0.051412] PM: genpd_remove: removed cpu3
[    0.051449] PM: genpd_remove: removed cpu2
[    0.051499] PM: genpd_remove: removed cpu1
[    0.051546] PM: genpd_remove: removed cpu0

Fix the problem by iterating the provider list reversely, so that parent
PD gets removed after child's PDs like below.

[    0.029052] CPUidle PSCI: init PM domain cpu0
[    0.029076] CPUidle PSCI: init PM domain cpu1
[    0.029103] CPUidle PSCI: init PM domain cpu2
[    0.029124] CPUidle PSCI: init PM domain cpu3
[    0.029151] CPUidle PSCI: init PM domain cpu-cluster0
[    0.029647] PM: genpd_remove: removed cpu0
[    0.029666] PM: genpd_remove: removed cpu1
[    0.029690] PM: genpd_remove: removed cpu2
[    0.029714] PM: genpd_remove: removed cpu3
[    0.029738] PM: genpd_remove: removed cpu-cluster0

Fixes: a65a397f2451 ("cpuidle: psci: Add support for PM domains by using genpd")
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: Fix incorrect page mapping clearance at fb_deferred_io_release()

commit fe9ae05cfbe587dda724fcf537c00bc2f287da62 upstream.

The recent fix for the deferred I/O by the commit
  3efc61d95259 ("fbdev: Fix invalid page access after closing deferred I/O devices")
caused a regression when the same fb device is opened/closed while
it's being used.  It resulted in a frozen screen even if something
is redrawn there after the close.  The breakage is because the patch
was made under a wrong assumption of a single open; in the current
code, fb_deferred_io_release() cleans up the page mapping of the
pageref list and it calls cancel_delayed_work_sync() unconditionally,
where both are no correct behavior for multiple opens.

This patch adds a refcount for the opens of the device, and applies
the cleanup only when all files get closed.

As both fb_deferred_io_open() and _close() are called always in the
fb_info lock (mutex), it's safe to use the normal int for the
refcounting.

Also, a useless BUG_ON() is dropped.

Fixes: 3efc61d95259 ("fbdev: Fix invalid page access after closing deferred I/O devices")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230308105012.1845-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit

commit 8ba572052a4b8fe5b205854d27e54e3486049b71 upstream.

According to the TJA1103 user manual, the bit for the reversed role in MII
or RMII modes is bit 4.

Cc: <stable@vger.kernel.org> # 5.15+
Fixes: b050f2f15e04 ("phy: nxp-c45: add driver for tja1103")
Signed-off-by: Radu Pirea (OSS) <radu-nicolae.pirea@oss.nxp.com>
Link: https://lore.kernel.org/r/20230309100111.1246214-1-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: PPTT: Fix to avoid sleep in the atomic context when PPTT is absent

commit 91d7b60a65d9f71230ea09b86d2058a884a3c2af upstream.

Commit 0c80f9e165f8 ("ACPI: PPTT: Leave the table mapped for the runtime usage")
enabled to map PPTT once on the first invocation of acpi_get_pptt() and
never unmapped the same allowing it to be used at runtime with out the
hassle of mapping and unmapping the table. This was needed to fetch LLC
information from the PPTT in the cpuhotplug path which is executed in
the atomic context as the acpi_get_table() might sleep waiting for a
mutex.

However it missed to handle the case when there is no PPTT on the system
which results in acpi_get_pptt() being called from all the secondary
CPUs attempting to fetch the LLC information in the atomic context
without knowing the absence of PPTT resulting in the splat like below:

 | BUG: sleeping function called from invalid context at kernel/locking/semaphore.c:164
 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
 | preempt_count: 1, expected: 0
 | RCU nest depth: 0, expected: 0
 | no locks held by swapper/1/0.
 | irq event stamp: 0
 | hardirqs last  enabled at (0): 0x0
 | hardirqs last disabled at (0): copy_process+0x61c/0x1b40
 | softirqs last  enabled at (0): copy_process+0x61c/0x1b40
 | softirqs last disabled at (0): 0x0
 | CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.3.0-rc1 #1
 | Call trace:
 |  dump_backtrace+0xac/0x138
 |  show_stack+0x30/0x48
 |  dump_stack_lvl+0x60/0xb0
 |  dump_stack+0x18/0x28
 |  __might_resched+0x160/0x270
 |  __might_sleep+0x58/0xb0
 |  down_timeout+0x34/0x98
 |  acpi_os_wait_semaphore+0x7c/0xc0
 |  acpi_ut_acquire_mutex+0x58/0x108
 |  acpi_get_table+0x40/0xe8
 |  acpi_get_pptt+0x48/0xa0
 |  acpi_get_cache_info+0x38/0x140
 |  init_cache_level+0xf4/0x118
 |  detect_cache_attributes+0x2e4/0x640
 |  update_siblings_masks+0x3c/0x330
 |  store_cpu_topology+0x88/0xf0
 |  secondary_start_kernel+0xd0/0x168
 |  __secondary_switched+0xb8/0xc0

Update acpi_get_pptt() to consider the fact that PPTT is once checked and
is not available on the system and return NULL avoiding any attempts to
fetch PPTT and thereby avoiding any possible sleep waiting for a mutex
in the atomic context.

Fixes: 0c80f9e165f8 ("ACPI: PPTT: Leave the table mapped for the runtime usage")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Pierre Gondois <pierre.gondois@arm.com>
Cc: 6.0+ <stable@vger.kernel.org> # 6.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

trace/hwlat: Do not start per-cpu thread if it is already running

commit 08697bca9bbba15f2058fdbd9f970bd5f6a8a2e8 upstream.

The hwlatd tracer will end up starting multiple per-cpu threads with
the following script:

    #!/bin/sh
    cd /sys/kernel/debug/tracing
    echo 0 > tracing_on
    echo hwlat > current_tracer
    echo per-cpu > hwlat_detector/mode
    echo 100000 > hwlat_detector/width
    echo 200000 > hwlat_detector/window
    echo 1 > tracing_on

To fix the issue, check if the hwlatd thread for the cpu is already
running, before starting a new one. Along with the previous patch, this
avoids running multiple instances of the same CPU thread on the system.

Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/
Link: https://lkml.kernel.org/r/20230310100451.3948583-3-tero.kristo@linux.intel.com
Cc: stable@vger.kernel.org
Fixes: f46b16520a087 ("trace/hwlat: Implement the per-cpu mode")
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

trace/hwlat: Do not wipe the contents of per-cpu thread data

commit 4c42f5f0d1dd20bddd9f940beb1e6ccad60c4498 upstream.

Do not wipe the contents of the per-cpu kthread data when starting the
tracer, as this will completely forget about already running instances
and can later start new additional per-cpu threads.

Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/
Link: https://lkml.kernel.org/r/20230310100451.3948583-2-tero.kristo@linux.intel.com
Cc: stable@vger.kernel.org
Fixes: f46b16520a087 ("trace/hwlat: Implement the per-cpu mode")
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: stifb: Provide valid pixelclock and add fb_check_var() checks

commit 203873a535d627c668f293be0cb73e26c30f9cc7 upstream.

Find a valid modeline depending on the machine graphic card
configuration and add the fb_check_var() function to validate
Xorg provided graphics settings.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci_am654: lower power-on failed message severity

commit 11440da77d6020831ee6f9ce4551b545dea789ee upstream.

Lower the power-on failed message severity from warn to info when the
controller does not power-up. It's normal to have this situation when
the SD card slot is empty, therefore we should not warn the user about
it.

Fixes: 7ca0f166f5b2 ("mmc: sdhci_am654: Add workaround for card detect debounce timer")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230306162751.163369-1-francesco@dolcini.it
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/boot: Don't always pass -mcpu=powerpc when building 32-bit uImage

commit ff7c76f66d8bad4e694c264c789249e1d3a8205d upstream.

When CONFIG_TARGET_CPU is specified then pass its value to the compiler
-mcpu option. This fixes following build error when building kernel with
powerpc e500 SPE capable cross compilers:

    BOOTAS  arch/powerpc/boot/crt0.o
  powerpc-linux-gnuspe-gcc: error: unrecognized argument in option ‘-mcpu=powerpc’
  powerpc-linux-gnuspe-gcc: note: valid arguments to ‘-mcpu=’ are: 8540 8548 native
  make[1]: *** [arch/powerpc/boot/Makefile:231: arch/powerpc/boot/crt0.o] Error 1

Similar change was already introduced for the main powerpc Makefile in
commit 446cda1b21d9 ("powerpc/32: Don't always pass -mcpu=powerpc to the
compiler").

Fixes: 40a75584e526 ("powerpc/boot: Build wrapper for an appropriate CPU")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2ae3ae5887babfdacc34435bff0944b3f336100a.1674632329.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64: Set default CPU in Kconfig

commit 45f7091aac3546ef8112bf62836650ca0bbf0b79 upstream.

Since commit 0069f3d14e7a ("powerpc/64e: Tie PPC_BOOK3E_64 to
PPC_E500MC"), the only possible BOOK3E/64 are E500, so no need of a
default CPU over the E5500.

When the user selects book3e, they must have an e500 compatible
compiler, and it won't work anymore with the default -mcpu=power64, see
commit d6b551b8f90c ("powerpc/64e: Fix build failure with GCC
12 (unrecognized opcode: `wrteei')").

For book3s/64, replace GENERIC_CPU by POWERPC64_CPU to match the PPC32
POWERPC_CPU, and set a default mpcu value in Kconfig directly.

When a user selects a particular CPU, they must ensure the compiler has
the requested capability. Therefore, remove hidden fallback, instead
offer user the possibility to say they want to use the toolchain
default.

Fixes: d6b551b8f90c ("powerpc/64e: Fix build failure with GCC 12 (unrecognized opcode: `wrteei')")
Reported-by: Pali Rohár <pali@kernel.org>
Tested-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/76c11197b058193dcb8e8b26adffba09cfbdab11.1674632329.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: teach mincore_hugetlb about pte markers

commit 63cf584203f3367c8b073d417c8e5cbbfc450506 upstream.

By checking huge_pte_none(), we incorrectly classify PTE markers as
"present".  Instead, check huge_pte_none_mostly(), classifying PTE markers
the same as if the PTE were completely blank.

PTE markers, unlike other kinds of swap entries, don't reference any
physical page and don't indicate that a physical page was mapped
previously.  As such, treat them as non-present for the sake of mincore().

Link: https://lkml.kernel.org/r/20230302222404.175303-1-jthoughton@google.com
Fixes: 5c041f5d1f23 ("mm: teach core mm about pte markers")
Signed-off-by: James Houghton <jthoughton@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/userfaultfd: propagate uffd-wp bit when PTE-mapping the huge zeropage

commit 42b2af2c9b7eede8ef21d0943f84d135e21a32a3 upstream.

Currently, we'd lose the userfaultfd-wp marker when PTE-mapping a huge
zeropage, resulting in the next write faults in the PMD range not
triggering uffd-wp events.

Various actions (partial MADV_DONTNEED, partial mremap, partial munmap,
partial mprotect) could trigger this.  However, most importantly,
un-protecting a single sub-page from the userfaultfd-wp handler when
processing a uffd-wp event will PTE-map the shared huge zeropage and lose
the uffd-wp bit for the remainder of the PMD.

Let's properly propagate the uffd-wp bit to the PMDs.

 #define _GNU_SOURCE
 #include <stdio.h>
 #include <stdlib.h>
 #include <stdint.h>
 #include <stdbool.h>
 #include <inttypes.h>
 #include <fcntl.h>
 #include <unistd.h>
 #include <errno.h>
 #include <poll.h>
 #include <pthread.h>
 #include <sys/mman.h>
 #include <sys/syscall.h>
 #include <sys/ioctl.h>
 #include <linux/userfaultfd.h>

 static size_t pagesize;
 static int uffd;
 static volatile bool uffd_triggered;

 #define barrier() __asm__ __volatile__("": : :"memory")

 static void uffd_wp_range(char *start, size_t size, bool wp)
 {
  struct uffdio_writeprotect uffd_writeprotect;

  uffd_writeprotect.range.start = (unsigned long) start;
  uffd_writeprotect.range.len = size;
  if (wp) {
  uffd_writeprotect.mode = UFFDIO_WRITEPROTECT_MODE_WP;
  } else {
  uffd_writeprotect.mode = 0;
  }
  if (ioctl(uffd, UFFDIO_WRITEPROTECT, &uffd_writeprotect)) {
  fprintf(stderr, "UFFDIO_WRITEPROTECT failed: %d\n", errno);
  exit(1);
  }
 }

 static void *uffd_thread_fn(void *arg)
 {
  static struct uffd_msg msg;
  ssize_t nread;

  while (1) {
  struct pollfd pollfd;
  int nready;

  pollfd.fd = uffd;
  pollfd.events = POLLIN;
  nready = poll(&pollfd, 1, -1);
  if (nready == -1) {
  fprintf(stderr, "poll() failed: %d\n", errno);
  exit(1);
  }

  nread = read(uffd, &msg, sizeof(msg));
  if (nread <= 0)
  continue;

  if (msg.event != UFFD_EVENT_PAGEFAULT ||
      !(msg.arg.pagefault.flags & UFFD_PAGEFAULT_FLAG_WP)) {
  printf("FAIL: wrong uffd-wp event fired\n");
  exit(1);
  }

  /* un-protect the single page. */
  uffd_triggered = true;
  uffd_wp_range((char *)(uintptr_t)msg.arg.pagefault.address,
        pagesize, false);
  }
  return arg;
 }

 static int setup_uffd(char *map, size_t size)
 {
  struct uffdio_api uffdio_api;
  struct uffdio_register uffdio_register;
  pthread_t thread;

  uffd = syscall(__NR_userfaultfd,
         O_CLOEXEC | O_NONBLOCK | UFFD_USER_MODE_ONLY);
  if (uffd < 0) {
  fprintf(stderr, "syscall() failed: %d\n", errno);
  return -errno;
  }

  uffdio_api.api = UFFD_API;
  uffdio_api.features = UFFD_FEATURE_PAGEFAULT_FLAG_WP;
  if (ioctl(uffd, UFFDIO_API, &uffdio_api) < 0) {
  fprintf(stderr, "UFFDIO_API failed: %d\n", errno);
  return -errno;
  }

  if (!(uffdio_api.features & UFFD_FEATURE_PAGEFAULT_FLAG_WP)) {
  fprintf(stderr, "UFFD_FEATURE_WRITEPROTECT missing\n");
  return -ENOSYS;
  }

  uffdio_register.range.start = (unsigned long) map;
  uffdio_register.range.len = size;
  uffdio_register.mode = UFFDIO_REGISTER_MODE_WP;
  if (ioctl(uffd, UFFDIO_REGISTER, &uffdio_register) < 0) {
  fprintf(stderr, "UFFDIO_REGISTER failed: %d\n", errno);
  return -errno;
  }

  pthread_create(&thread, NULL, uffd_thread_fn, NULL);

  return 0;
 }

 int main(void)
 {
  const size_t size = 4 * 1024 * 1024ull;
  char *map, *cur;

  pagesize = getpagesize();

  map = mmap(NULL, size, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANON, -1, 0);
  if (map == MAP_FAILED) {
  fprintf(stderr, "mmap() failed\n");
  return -errno;
  }

  if (madvise(map, size, MADV_HUGEPAGE)) {
  fprintf(stderr, "MADV_HUGEPAGE failed\n");
  return -errno;
  }

  if (setup_uffd(map, size))
  return 1;

  /* Read the whole range, populating zeropages. */
  madvise(map, size, MADV_POPULATE_READ);

  /* Write-protect the whole range. */
  uffd_wp_range(map, size, true);

  /* Make sure uffd-wp triggers on each page. */
  for (cur = map; cur < map + size; cur += pagesize) {
  uffd_triggered = false;

  barrier();
  /* Trigger a write fault. */
  *cur = 1;
  barrier();

  if (!uffd_triggered) {
  printf("FAIL: uffd-wp did not trigger\n");
  return 1;
  }
  }

  printf("PASS: uffd-wp triggered\n");
  return 0;
 }

Link: https://lkml.kernel.org/r/20230302175423.589164-1-david@redhat.com
Fixes: e06f1e1dd499 ("userfaultfd: wp: enabled write protection in userfaultfd API")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vp_vdpa: fix the crash in hot unplug with vp_vdpa

commit aed8efddd39b3434c96718d39009285c52b1cafc upstream.

While unplugging the vp_vdpa device, it triggers a kernel panic
The root cause is: vdpa_mgmtdev_unregister() will accesses modern
devices which will cause a use after free.
So need to change the sequence in vp_vdpa_remove

[  195.003359] BUG: unable to handle page fault for address: ff4e8beb80199014
[  195.004012] #PF: supervisor read access in kernel mode
[  195.004486] #PF: error_code(0x0000) - not-present page
[  195.004960] PGD 100000067 P4D 1001b6067 PUD 1001b7067 PMD 1001b8067 PTE 0
[  195.005578] Oops: 0000 1 PREEMPT SMP PTI
[  195.005968] CPU: 13 PID: 164 Comm: kworker/u56:10 Kdump: loaded Not tainted 5.14.0-252.el9.x86_64 #1
[  195.006792] Hardware name: Red Hat KVM/RHEL, BIOS edk2-20221207gitfff6d81270b5-2.el9 unknown
[  195.007556] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[  195.008059] RIP: 0010:ioread8+0x31/0x80
[  195.008418] Code: 77 28 48 81 ff 00 00 01 00 76 0b 89 fa ec 0f b6 c0 c3 cc cc cc cc 8b 15 ad 72 93 01 b8 ff 00 00 00 85 d2 75 0f c3 cc cc cc cc <8a> 07 0f b6 c0 c3 cc cc cc cc 83 ea 01 48 83 ec 08 48 89 fe 48 c7
[  195.010104] RSP: 0018:ff4e8beb8067bab8 EFLAGS: 00010292
[  195.010584] RAX: ffffffffc05834a0 RBX: ffffffffc05843c0 RCX: ff4e8beb8067bae0
[  195.011233] RDX: ff1bcbd580f88000 RSI: 0000000000000246 RDI: ff4e8beb80199014
[  195.011881] RBP: ff1bcbd587e39000 R08: ffffffff916fa2d0 R09: ff4e8beb8067ba68
[  195.012527] R10: 000000000000001c R11: 0000000000000000 R12: ff1bcbd5a3de9120
[  195.013179] R13: ffffffffc062d000 R14: 0000000000000080 R15: ff1bcbe402bc7805
[  195.013826] FS:  0000000000000000(0000) GS:ff1bcbe402740000(0000) knlGS:0000000000000000
[  195.014564] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  195.015093] CR2: ff4e8beb80199014 CR3: 0000000107dea002 CR4: 0000000000771ee0
[  195.015741] PKRU: 55555554
[  195.016001] Call Trace:
[  195.016233]  <TASK>
[  195.016434]  vp_modern_get_status+0x12/0x20
[  195.016823]  vp_vdpa_reset+0x1b/0x50 [vp_vdpa]
[  195.017238]  virtio_vdpa_reset+0x3c/0x48 [virtio_vdpa]
[  195.017709]  remove_vq_common+0x1f/0x3a0 [virtio_net]
[  195.018178]  virtnet_remove+0x5d/0x70 [virtio_net]
[  195.018618]  virtio_dev_remove+0x3d/0x90
[  195.018986]  device_release_driver_internal+0x1aa/0x230
[  195.019466]  bus_remove_device+0xd8/0x150
[  195.019841]  device_del+0x18b/0x3f0
[  195.020167]  ? kernfs_find_ns+0x35/0xd0
[  195.020526]  device_unregister+0x13/0x60
[  195.020894]  unregister_virtio_device+0x11/0x20
[  195.021311]  device_release_driver_internal+0x1aa/0x230
[  195.021790]  bus_remove_device+0xd8/0x150
[  195.022162]  device_del+0x18b/0x3f0
[  195.022487]  device_unregister+0x13/0x60
[  195.022852]  ? vdpa_dev_remove+0x30/0x30 [vdpa]
[  195.023270]  vp_vdpa_dev_del+0x12/0x20 [vp_vdpa]
[  195.023694]  vdpa_match_remove+0x2b/0x40 [vdpa]
[  195.024115]  bus_for_each_dev+0x78/0xc0
[  195.024471]  vdpa_mgmtdev_unregister+0x65/0x80 [vdpa]
[  195.024937]  vp_vdpa_remove+0x23/0x40 [vp_vdpa]
[  195.025353]  pci_device_remove+0x36/0xa0
[  195.025719]  device_release_driver_internal+0x1aa/0x230
[  195.026201]  pci_stop_bus_device+0x6c/0x90
[  195.026580]  pci_stop_and_remove_bus_device+0xe/0x20
[  195.027039]  disable_slot+0x49/0x90
[  195.027366]  acpiphp_disable_and_eject_slot+0x15/0x90
[  195.027832]  hotplug_event+0xea/0x210
[  195.028171]  ? hotplug_event+0x210/0x210
[  195.028535]  acpiphp_hotplug_notify+0x22/0x80
[  195.028942]  ? hotplug_event+0x210/0x210
[  195.029303]  acpi_device_hotplug+0x8a/0x1d0
[  195.029690]  acpi_hotplug_work_fn+0x1a/0x30
[  195.030077]  process_one_work+0x1e8/0x3c0
[  195.030451]  worker_thread+0x50/0x3b0
[  195.030791]  ? rescuer_thread+0x3a0/0x3a0
[  195.031165]  kthread+0xd9/0x100
[  195.031459]  ? kthread_complete_and_exit+0x20/0x20
[  195.031899]  ret_from_fork+0x22/0x30
[  195.032233]  </TASK>

Fixes: ffbda8e9df10 ("vdpa/vp_vdpa : add vdpa tool support in vp_vdpa")
Tested-by: Lei Yang <leiyang@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230214080924.131462-1-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ice: avoid bonding causing auxiliary plug/unplug under RTNL lock

commit 248401cb2c4612d83eb0c352ee8103b78b8eb365 upstream.

RDMA is not supported in ice on a PF that has been added to a bonded
interface. To enforce this, when an interface enters a bond, we unplug
the auxiliary device that supports RDMA functionality.  This unplug
currently happens in the context of handling the netdev bonding event.
This event is sent to the ice driver under RTNL context.  This is causing
a deadlock where the RDMA driver is waiting for the RTNL lock to complete
the removal.

Defer the unplugging/re-plugging of the auxiliary device to the service
task so that it is not performed under the RTNL lock context.

Cc: stable@vger.kernel.org # 6.1.x
Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Link: https://lore.kernel.org/netdev/CAK8fFZ6A_Gphw_3-QMGKEFQk=sfCw1Qmq0TVZK3rtAi7vb621A@mail.gmail.com/
Fixes: 5cb1ebdbc434 ("ice: Fix race condition during interface enslave")
Fixes: 4eace75e0853 ("RDMA/irdma: Report the correct link speed")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230310194833.3074601-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV3000

commit 9630d80655bfe7e62e4aff2889dc4eae7ceeb887 upstream.

Added a quirk to fix the Netac NV3000 SSD reporting duplicate NGUIDs.

Cc: <stable@vger.kernel.org>
Signed-off-by: Elmer Miroslav Mosher Golovin <miroslav@mishamosher.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix data corruption after failed write

commit 90410bcf873cf05f54a32183afff0161f44f9715 upstream.

When buffered write fails to copy data into underlying page cache page,
ocfs2_write_end_nolock() just zeroes out and dirties the page.  This can
leave dirty page beyond EOF and if page writeback tries to write this page
before write succeeds and expands i_size, page gets into inconsistent
state where page dirty bit is clear but buffer dirty bits stay set
resulting in page data never getting written and so data copied to the
page is lost.  Fix the problem by invalidating page beyond EOF after
failed write.

Link: https://lkml.kernel.org/r/20230302153843.18499-1-jack@suse.cz
Fixes: 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Fix invalid address access in lookup_rec() when index is 0

commit ee92fa443358f4fc0017c1d0d325c27b37802504 upstream.

KASAN reported follow problem:

 BUG: KASAN: use-after-free in lookup_rec
 Read of size 8 at addr ffff000199270ff0 by task modprobe
 CPU: 2 Comm: modprobe
 Call trace:
  kasan_report
  __asan_load8
  lookup_rec
  ftrace_location
  arch_check_ftrace_location
  check_kprobe_address_safe
  register_kprobe

When checking pg->records[pg->index - 1].ip in lookup_rec(), it can get a
pg which is newly added to ftrace_pages_start in ftrace_process_locs().
Before the first pg->index++, index is 0 and accessing pg->records[-1].ip
will cause this problem.

Don't check the ip when pg->index is 0.

Link: https://lore.kernel.org/linux-trace-kernel/20230309080230.36064-1-chenzhongjin@huawei.com
Cc: stable@vger.kernel.org
Fixes: 9644302e3315 ("ftrace: Speed up search by skipping pages by address")
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: fix lockdep false positive in mptcp_pm_nl_create_listen_socket()

commit cee4034a3db1d30c3243dd51506a9d4ab1a849fa upstream.

Christoph reports a lockdep splat in the mptcp_subflow_create_socket()
error path, when such function is invoked by
mptcp_pm_nl_create_listen_socket().

Such code path acquires two separates, nested socket lock, with the
internal lock operation lacking the "nested" annotation. Adding that
in sock_release() for mptcp's sake only could be confusing.

Instead just add a new lockclass to the in-kernel msk socket,
re-initializing the lockdep infra after the socket creation.

Fixes: ad2171009d96 ("mptcp: fix locking for in-kernel listener creation")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/354
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: avoid setting TCP_CLOSE state twice

commit 3ba14528684f528566fb7d956bfbfb958b591d86 upstream.

tcp_set_state() is called from tcp_done() already.

There is then no need to first set the state to TCP_CLOSE, then call
tcp_done().

Fixes: d582484726c4 ("mptcp: fix fallback for MP_JOIN subflows")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/362
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: add ro_after_init for tcp{,v6}_prot_override

commit 822467a48e938e661965d09df5fcac66f7291050 upstream.

Add __ro_after_init labels for the variables tcp_prot_override and
tcpv6_prot_override, just like other variables adjacent to them, to
indicate that they are initialised from the init hooks and no writes
occur afterwards.

Fixes: b19bc2945b40 ("mptcp: implement delegated actions")
Cc: stable@vger.kernel.org
Fixes: 51fa7f8ebf0e ("mptcp: mark ops structures as ro_after_init")
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: fix possible deadlock in subflow_error_report

commit b7a679ba7c652587b85294f4953f33ac0b756d40 upstream.

Christoph reported a possible deadlock while the TCP stack
destroys an unaccepted subflow due to an incoming reset: the
MPTCP socket error path tries to acquire the msk-level socket
lock while TCP still owns the listener socket accept queue
spinlock, and the reverse dependency already exists in the
TCP stack.

Note that the above is actually a lockdep false positive, as
the chain involves two separate sockets. A different per-socket
lockdep key will address the issue, but such a change will be
quite invasive.

Instead, we can simply stop earlier the socket error handling
for orphaned or unaccepted subflows, breaking the critical
lockdep chain. Error handling in such a scenario is a no-op.

Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com>
Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/355
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: disconnect MPCC only on OTG change

commit 7304ee979b6b6422f41a1312391a5e505fc29ccd upstream.

[Why]
Framedrops are observed while playing Vp9 and Av1 10 bit
video on 8k resolution using VSR while playback controls
are disappeared/appeared

[How]
Now ODM 2 to 1 is disabled for 5k or greater resolutions on VSR.

Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Ayush Gupta <ayugupta@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Do not set DRR on pipe Commit

commit 56574f89dbd84004c3fd6485bcaafb5aa9b8be14 upstream.

[WHY]
Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a
pipe commit can cause underflow.

Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: bump SMU 13.0.4 driver_if header version

commit ab9bdb1213b4b40942af6a383f555d0c14874c1b upstream.

Align the SMU driver interface version with PMFW to
suppress the version mismatch message on driver loading.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: Fix sienna cichlid incorrect OD volage after resume

commit a9386ee9681585794dbab95d4ce6826f73d19af6 upstream.

Always setup overdrive tables after resume. Preserve only some
user-defined settings in user_overdrive_table if they're set.

Copy restored user_overdrive_table into od_table to get correct
values.

On cold boot, BTC was triggered and GfxVfCurve was calibrated. We
got VfCurve settings (a). On resuming back, BTC will be triggered
again and GfxVfCurve will be recalibrated. VfCurve settings (b)
got may be different from those of cold boot.  So if we reuse
those VfCurve settings (a) got on cold boot on suspend, we can
run into discrepencies.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1897
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2276
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Błażej Szczygieł <mumei6102@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Don't resume IOMMU after incomplete init

commit f3921a9a641483784448fb982b2eb738b383d9b9 upstream.

Check kfd->init_complete in kgd2kfd_iommu_resume, consistent with other
kgd2kfd calls. This should fix IOMMU errors on resume from suspend when
KFD IOMMU initialization failed.

Reported-by: Matt Fagnani <matt.fagnani@bell.net>
Link: https://lore.kernel.org/r/4a3b225c-2ffd-e758-4de1-447375e34cad@bell.net/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217170
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2454
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Linux regression tracking (Thorsten Leemhuis) <regressions@leemhuis.info>
Cc: stable@vger.kernel.org
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Matt Fagnani <matt.fagnani@bell.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/dg2: Add HDMI pixel clock frequencies 267.30 and 319.89 MHz

commit 46bc23dcd94569270d02c4c1f7e62ae01ebd53bb upstream.

Add snps phy table values for HDMI pixel clocks 267.30 MHz and
319.89 MHz. Values are based on the Bspec algorithm for
PLL programming for HDMI.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8008
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230223043619.3941382-1-ankit.k.nautiyal@intel.com
(cherry picked from commit d46746b8b13cbd377ffc733e465d25800459a31b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/active: Fix misuse of non-idle barriers as fence trackers

commit e0e6b416b25ee14716f3549e0cbec1011b193809 upstream.

Users reported oopses on list corruptions when using i915 perf with a
number of concurrently running graphics applications.  Root cause analysis
pointed at an issue in barrier processing code -- a race among perf open /
close replacing active barriers with perf requests on kernel context and
concurrent barrier preallocate / acquire operations performed during user
context first pin / last unpin.

When adding a request to a composite tracker, we try to reuse an existing
fence tracker, already allocated and registered with that composite.  The
tracker we obtain may already track another fence, may be an idle barrier,
or an active barrier.

If the tracker we get occurs a non-idle barrier then we try to delete that
barrier from a list of barrier tasks it belongs to.  However, while doing
that we don't respect return value from a function that performs the
barrier deletion.  Should the deletion ever fail, we would end up reusing
the tracker still registered as a barrier task.  Since the same structure
field is reused with both fence callback lists and barrier tasks list,
list corruptions would likely occur.

Barriers are now deleted from a barrier tasks list by temporarily removing
the list content, traversing that content with skip over the node to be
deleted, then populating the list back with the modified content.  Should
that intentionally racy concurrent deletion attempts be not serialized,
one or more of those may fail because of the list being temporary empty.

Related code that ignores the results of barrier deletion was initially
introduced in v5.4 by commit d8af05ff38ae ("drm/i915: Allow sharing the
idle-barrier from other kernel requests").  However, all users of the
barrier deletion routine were apparently serialized at that time, then the
issue didn't exhibit itself.  Results of git bisect with help of a newly
developed igt@gem_barrier_race@remote-request IGT test indicate that list
corruptions might start to appear after commit 311770173fac ("drm/i915/gt:
Schedule request retirement when timeline idles"), introduced in v5.5.

Respect results of barrier deletion attempts -- mark the barrier as idle
only if successfully deleted from the list.  Then, before proceeding with
setting our fence as the one currently tracked, make sure that the tracker
we've got is not a non-idle barrier.  If that check fails then don't use
that tracker but go back and try to acquire a new, usable one.

v3: use unlikely() to document what outcome we expect (Andi),
  - fix bad grammar in commit description.
v2: no code changes,
  - blame commit 311770173fac ("drm/i915/gt: Schedule request retirement
    when timeline idles"), v5.5, not commit d8af05ff38ae ("drm/i915: Allow
    sharing the idle-barrier from other kernel requests"), v5.4,
  - reword commit description.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6333
Fixes: 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org # v5.5
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302120820.48740-1-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 506006055769b10d1b2b4e22f636f3b45e0e9fc7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/sun4i: fix missing component unbind on bind errors

commit c22f2ff8724b49dce2ae797e9fbf4bc0fa91112f upstream.

Make sure to unbind all subcomponents when binding the aggregate device
fails.

Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support")
Cc: stable@vger.kernel.org # 4.7
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230306103242.4775-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/shmem-helper: Remove another errant put in error path

commit ee9adb7a45516cfa536ca92253d7ae59d56db9e4 upstream.

drm_gem_shmem_mmap() doesn't own reference in error code path, resulting
in the dma-buf shmem GEM object getting prematurely freed leading to a
later use-after-free.

Fixes: f49a51bfdc8e ("drm/shme-helpers: Fix dma_buf_mmap forwarding bug")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230108211311.3950107-1-dmitry.osipenko@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: asid: Fixup stale TLB entry cause application crash

commit 82dd33fde0268cc622d3d1ac64971f3f61634142 upstream.

After use_asid_allocator is enabled, the userspace application will
crash by stale TLB entries. Because only using cpumask_clear_cpu without
local_flush_tlb_all couldn't guarantee CPU's TLB entries were fresh.
Then set_mm_asid would cause the user space application to get a stale
value by stale TLB entry, but set_mm_noasid is okay.

Here is the symptom of the bug:
unhandled signal 11 code 0x1 (coredump)
   0x0000003fd6d22524 <+4>:     auipc   s0,0x70
   0x0000003fd6d22528 <+8>:     ld      s0,-148(s0) # 0x3fd6d92490
=> 0x0000003fd6d2252c <+12>:    ld      a5,0(s0)
(gdb) i r s0
s0          0x8082ed1cc3198b21       0x8082ed1cc3198b21
(gdb) x /2x 0x3fd6d92490
0x3fd6d92490:   0xd80ac8a8      0x0000003f
The core dump file shows that register s0 is wrong, but the value in
memory is correct. Because 'ld s0, -148(s0)' used a stale mapping entry
in TLB and got a wrong result from an incorrect physical address.

When the task ran on CPU0, which loaded/speculative-loaded the value of
address(0x3fd6d92490), then the first version of the mapping entry was
PTWed into CPU0's TLB.
When the task switched from CPU0 to CPU1 (No local_tlb_flush_all here by
asid), it happened to write a value on the address (0x3fd6d92490). It
caused do_page_fault -> wp_page_copy -> ptep_clear_flush ->
ptep_get_and_clear & flush_tlb_page.
The flush_tlb_page used mm_cpumask(mm) to determine which CPUs need TLB
flush, but CPU0 had cleared the CPU0's mm_cpumask in the previous
switch_mm. So we only flushed the CPU1 TLB and set the second version
mapping of the PTE. When the task switched from CPU1 to CPU0 again, CPU0
still used a stale TLB mapping entry which contained a wrong target
physical address. It raised a bug when the task happened to read that
value.

   CPU0                               CPU1
   - switch 'task' in
   - read addr (Fill stale mapping
     entry into TLB)
   - switch 'task' out (no tlb_flush)
                                      - switch 'task' in (no tlb_flush)
                                      - write addr cause pagefault
                                        do_page_fault() (change to
                                        new addr mapping)
                                          wp_page_copy()
                                            ptep_clear_flush()
                                              ptep_get_and_clear()
                                              & flush_tlb_page()
                                        write new value into addr
                                      - switch 'task' out (no tlb_flush)
   - switch 'task' in (no tlb_flush)
   - read addr again (Use stale
     mapping entry in TLB)
     get wrong value from old phyical
     addr, BUG!

The solution is to keep all CPUs' footmarks of cpumask(mm) in switch_mm,
which could guarantee to invalidate all stale TLB entries during TLB
flush.

Fixes: 65d4b9c53017 ("RISC-V: Implement ASID allocator")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Zong Li <zong.li@sifive.com>
Tested-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Cc: Anup Patel <apatel@ventanamicro.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230226150137.1919750-3-geomatsi@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "riscv: mm: notify remote harts about mmu cache updates"

commit e921050022f1f12d5029d1487a7dfc46cde15523 upstream.

This reverts the remaining bits of commit 4bd1d80efb5a ("riscv: mm:
notify remote harts harts about mmu cache updates").

According to bug reports, suggested approach to fix stale TLB entries
is not sufficient. It needs to be replaced by a more robust solution.

Fixes: 4bd1d80efb5a ("riscv: mm: notify remote harts about mmu cache updates")
Reported-by: Zong Li <zong.li@sifive.com>
Reported-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Cc: stable@vger.kernel.org
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230226150137.1919750-2-geomatsi@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: fix speaker, mute/micmute LEDs not work on a HP platform

commit 7bb62340951a9af20235a3bde8c98e2e292915df upstream.

There is a HP platform needs ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED quirk to
make mic-mute/audio-mute/speaker working.

Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230307135317.37621-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book2 Pro

commit a86e79e3015f5dd8e1b01ccfa49bd5c6e41047a1 upstream.

Samsung Galaxy Book2 Pro (13" 2022 NP930XED-KA1DE) with codec SSID
144d:c868 requires the same workaround for enabling the speaker amp
like other Samsung models with ALC298 code.

Signed-off-by: Hamidreza H. Fard <nitocris@posteo.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230307163741.3878-1-nitocris@posteo.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: intel-dsp-config: add MTL PCI id

commit bbdf904b13a62bb8b1272d92a7dde082dff86fbb upstream.

Use SOF as default audio driver.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230306074101.3906707-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: add missing consistency checks for CR0 and CR4

commit 112e66017bff7f2837030f34c2bc19501e9212d5 upstream.

The effective values of the guest CR0 and CR4 registers may differ from
those included in the VMCS12.  In particular, disabling EPT forces
CR4.PAE=1 and disabling unrestricted guest mode forces CR0.PG=CR0.PE=1.

Therefore, checks on these bits cannot be delegated to the processor
and must be performed by KVM.

Reported-by: Reima ISHII <ishiir@g.ecc.u-tokyo.ac.jp>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Modify AVIC GATag to support max number of 512 vCPUs

commit 5999715922c5a3ede5d8fe2a6b17aba58a157d41 upstream.

Define AVIC_VCPU_ID_MASK based on AVIC_PHYSICAL_MAX_INDEX, i.e. the mask
that effectively controls the largest guest physical APIC ID supported by
x2AVIC, instead of hardcoding the number of bits to 8 (and the number of
VM bits to 24).

The AVIC GATag is programmed into the AMD IOMMU IRTE to provide a
reference back to KVM in case the IOMMU cannot inject an interrupt into a
non-running vCPU.  In such a case, the IOMMU notifies software by creating
a GALog entry with the corresponded GATag, and KVM then uses the GATag to
find the correct VM+vCPU to kick.  Dropping bit 8 from the GATag results
in kicking the wrong vCPU when targeting vCPUs with x2APIC ID > 255.

Fixes: 4d1d7942e36a ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode")
Cc: stable@vger.kernel.org
Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20230207002156.521736-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Fix a benign off-by-one bug in AVIC physical table mask

commit 3ec7a1b2743c07c45f4a0c508114f6cb410ddef3 upstream.

Define the "physical table max index mask" as bits 8:0, not 9:0.  x2AVIC
currently supports a max of 512 entries, i.e. the max index is 511, and
the inputs to GENMASK_ULL() are inclusive.  The bug is benign as bit 9 is
reserved and never set by KVM, i.e. KVM is just clearing bits that are
guaranteed to be zero.

Note, as of this writing, APM "Rev. 3.39-October 2022" incorrectly states
that bits 11:8 are reserved in Table B-1. VMCB Layout, Control Area.  I.e.
that table wasn't updated when x2AVIC support was added.

Opportunistically fix the comment for the max AVIC ID to align with the
code, and clean up comment formatting too.

Fixes: 4d1d7942e36a ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode")
Cc: stable@vger.kernel.org
Cc: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20230207002156.521736-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix smb2_set_path_size()

commit 211baef0eabf4169ce4f73ebd917749d1a7edd74 upstream.

If cifs_get_writable_path() finds a writable file, smb2_compound_op()
must use that file's FID and not the COMPOUND_FID.

Cc: stable@vger.kernel.org
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Make tracepoint lockdep check actually test something

commit c2679254b9c9980d9045f0f722cf093a2b1f7590 upstream.

A while ago where the trace events had the following:

   rcu_read_lock_sched_notrace();
   rcu_dereference_sched(...);
   rcu_read_unlock_sched_notrace();

If the tracepoint is enabled, it could trigger RCU issues if called in
the wrong place. And this warning was only triggered if lockdep was
enabled. If the tracepoint was never enabled with lockdep, the bug would
not be caught. To handle this, the above sequence was done when lockdep
was enabled regardless if the tracepoint was enabled or not (although the
always enabled code really didn't do anything, it would still trigger a
warning).

But a lot has changed since that lockdep code was added. One is, that
sequence no longer triggers any warning. Another is, the tracepoint when
enabled doesn't even do that sequence anymore.

The main check we care about today is whether RCU is "watching" or not.
So if lockdep is enabled, always check if rcu_is_watching() which will
trigger a warning if it is not (tracepoints require RCU to be watching).

Note, that old sequence did add a bit of overhead when lockdep was enabled,
and with the latest kernel updates, would cause the system to slow down
enough to trigger kernel "stalled" warnings.

Link: http://lore.kernel.org/lkml/20140806181801.GA4605@redhat.com
Link: http://lore.kernel.org/lkml/20140807175204.C257CAC5@viggo.jf.intel.com
Link: https://lore.kernel.org/lkml/20230307184645.521db5c9@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20230310172856.77406446@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Fixes: e6753f23d961 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Check field value in hist_field_name()

commit 9f116f76fa8c04c81aef33ad870dbf9a158e5b70 upstream.

The function hist_field_name() cannot handle being passed a NULL field
parameter. It should never be NULL, but due to a previous bug, NULL was
passed to the function and the kernel crashed due to a NULL dereference.
Mark Rutland reported this to me on IRC.

The bug was fixed, but to prevent future bugs from crashing the kernel,
check the field and add a WARN_ON() if it is NULL.

Link: https://lkml.kernel.org/r/20230302020810.762384440@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Fixes: c6afad49d127f ("tracing: Add hist trigger 'sym' and 'sym-offset' modifiers")
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Make splice_read available again

commit e400be674a1a40e9dcb2e95f84d6c1fd2d88f31d upstream.

Since the commit 36e2c7421f02 ("fs: don't allow splice read/write
without explicit ops") is applied to the kernel, splice() and
sendfile() calls on the trace file (/sys/kernel/debug/tracing
/trace) return EINVAL.

This patch restores these system calls by initializing splice_read
in file_operations of the trace file. This patch only enables such
functionalities for the read case.

Link: https://lore.kernel.org/linux-trace-kernel/20230314013707.28814-1-sfoon.kim@samsung.com
Cc: stable@vger.kernel.org
Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: Sung-hun Kim <sfoon.kim@samsung.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: generate signkey for the channel that's reconnecting

commit 05ce0448c3f36febd8db0ee0e9e16557f3ab5ee8 upstream.

Before my changes to how multichannel reconnects work, the
primary channel was always used to do a non-binding session
setup. With my changes, that is not the case anymore.
Missed this place where channel at index 0 was forcibly
updated with the signing key.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: select BLOCK_LEGACY_AUTOLOAD

commit 6c0f5898836c05c6d850a750ed7940ba29e4e6c5 upstream.

When BLOCK_LEGACY_AUTOLOAD is not enable, mdadm is not able to
activate new arrays unless "CREATE names=yes" appears in
mdadm.conf

As this is a regression we need to always enable BLOCK_LEGACY_AUTOLOAD
for when MD is selected - at least until mdadm is updated and the
updates widely available.

Cc: stable@vger.kernel.org # v5.18+
Fixes: fbdee71bb5d8 ("block: deprecate autoloading based on dev_t")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interconnect: exynos: fix registration race

commit c9e46ca612cfbb0cf890f7ae7389b742e90efe64 upstream.

The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to trigger a NULL-pointer
deference when either a NULL pointer or not fully initialised node is
returned from exynos_generic_icc_xlate().

Switch to using the new API where the provider is not registered until
after it has been fully initialised.

Fixes: 2f95b9d5cf0b ("interconnect: Add generic interconnect driver for Exynos SoCs")
Cc: stable@vger.kernel.org # 5.11
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-16-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interconnect: exynos: fix node leak in probe PM QoS error path

commit 3aab264875bf3c915ea2517fae1eec213e0b4987 upstream.

Make sure to add the newly allocated interconnect node to the provider
before adding the PM QoS request so that the node is freed on errors.

Fixes: 2f95b9d5cf0b ("interconnect: Add generic interconnect driver for Exynos SoCs")
Cc: stable@vger.kernel.org # 5.11
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-15-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interconnect: qcom: msm8974: fix registration race

commit bfe7bcd2b9f5215de2144f097f39971180e7ea54 upstream.

The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.

Switch to using the new API where the provider is not registered until
after it has been fully initialised.

Fixes: 4e60a9568dc6 ("interconnect: qcom: add msm8974 driver")
Cc: stable@vger.kernel.org # 5.5
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-12-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interconnect: qcom: rpmh: fix registration race

commit 74240a5bebd48d8b843c6d0f1acfaa722a5abeb7 upstream.

The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.

Switch to using the new API where the provider is not registered until
after it has been fully initialised.

Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support")
Cc: stable@vger.kernel.org # 5.7
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-11-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interconnect: qcom: rpmh: fix probe child-node error handling

commit 6570d1d46eeade82965ccc4a3ab7d778898ef4bf upstream.

Make sure to clean up and release resources properly also in case probe
fails when populating child devices.

Fixes: 57eb14779dfd ("interconnect: qcom: icc-rpmh: Support child NoC device probe")
Cc: stable@vger.kernel.org # 6.0
Cc: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-10-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interconnect: qcom: rpm: fix registration race

commit 90ae93d8affc1061cd87ca8ddd9a838c7d31a158 upstream.

The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.

Switch to using the new API where the provider is not registered until
after it has been fully initialised.

Fixes: 62feb14ee8a3 ("interconnect: qcom: Consolidate interconnect RPM support")
Fixes: 30c8fa3ec61a ("interconnect: qcom: Add MSM8916 interconnect provider driver")
Cc: stable@vger.kernel.org # 5.7
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-9-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interconnect: qcom: rpm: fix probe child-node error handling

commit bc463201f60803fa6bf2741d59441031cd0910e4 upstream.

Make sure to clean up and release resources properly also in case probe
fails when populating child devices.

Fixes: e39bf2972c6e ("interconnect: icc-rpm: Support child NoC device probe")
Cc: stable@vger.kernel.org # 5.17
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-7-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interconnect: qcom: osm-l3: fix registration race

commit 174941ed28a3573db075da46d95b4dcf9d4c49c2 upstream.

The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail:

of_icc_xlate_onecell: invalid index 0
cpu cpu0: error -EINVAL: error finding src node
cpu cpu0: dev_pm_opp_of_find_icc_paths: Unable to get path0: -22
qcom-cpufreq-hw: probe of 18591000.cpufreq failed with error -22

Switch to using the new API where the provider is not registered until
after it has been fully initialised.

Fixes: 5bc9900addaf ("interconnect: qcom: Add OSM L3 interconnect provider support")
Cc: stable@vger.kernel.org # 5.7
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-6-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interconnect: fix mem leak when freeing nodes

commit a5904f415e1af72fa8fe6665aa4f554dc2099a95 upstream.

The node link array is allocated when adding links to a node but is not
deallocated when nodes are destroyed.

Fixes: 11f1ceca7031 ("interconnect: Add generic on-chip interconnect API")
Cc: stable@vger.kernel.org # 5.1
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # i.MX8MP MSC SM2-MB-EP1 Board
Link: https://lore.kernel.org/r/20230306075651.2449-2-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interconnect: imx: fix registration race

commit 9fbd35520f1f7f3cbe1873939a27ad9b009f21f9 upstream.

The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.

Switch to using the new API where the provider is not registered until
after it has been fully initialised.

Fixes: f0d8048525d7 ("interconnect: Add imx core driver")
Cc: stable@vger.kernel.org # 5.8
Cc: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # i.MX8MP MSC SM2-MB-EP1 Board
Link: https://lore.kernel.org/r/20230306075651.2449-5-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interconnect: fix provider registration API

commit eb59eca0d8ac15f8c1b7f1cd35999455a90292c0 upstream.

The current interconnect provider interface is inherently racy as
providers are expected to be added before being fully initialised.

Specifically, nodes are currently not added and the provider data is not
initialised until after registering the provider which can cause racing
DT lookups to fail.

Add a new provider API which will be used to fix up the interconnect
drivers.

The old API is reimplemented using the new interface and will be removed
once all drivers have been fixed.

Fixes: 11f1ceca7031 ("interconnect: Add generic on-chip interconnect API")
Fixes: 87e3031b6fbd ("interconnect: Allow endpoints translation via DT")
Cc: stable@vger.kernel.org # 5.1
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # i.MX8MP MSC SM2-MB-EP1 Board
Link: https://lore.kernel.org/r/20230306075651.2449-4-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interconnect: fix icc_provider_del() error handling

commit e0e7089bf9a87bc5e3997422e4e24563424f9018 upstream.

The interconnect framework currently expects that providers are only
removed when there are no users and after all nodes have been removed.

There is currently nothing that guarantees this to be the case and the
framework does not do any reference counting, but refusing to remove the
provider is never correct as that would leave a dangling pointer to a
resource that is about to be released in the global provider list (e.g.
accessible through debugfs).

Replace the current sanity checks with WARN_ON() so that the provider is
always removed.

Fixes: 11f1ceca7031 ("interconnect: Add generic on-chip interconnect API")
Cc: stable@vger.kernel.org # 5.1: 680f8666baf6: interconnect: Make icc_provider_del() return void
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # i.MX8MP MSC SM2-MB-EP1 Board
Link: https://lore.kernel.org/r/20230306075651.2449-3-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/ipl: add missing intersection check to ipl_report handling

commit a52e5cdbe8016d4e3e6322fd93d71afddb9a5af9 upstream.

The code which handles the ipl report is searching for a free location
in memory where it could copy the component and certificate entries to.
It checks for intersection between the sections required for the kernel
and the component/certificate data area, but fails to check whether
the data structures linking these data areas together intersect.

This might cause the iplreport copy code to overwrite the iplreport
itself. Fix this by adding two addtional intersection checks.

Cc: <stable@vger.kernel.org>
Fixes: 9641b8cc733f ("s390/ipl: read IPL report at early boot")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: Fix a NULL pointer dereference

commit 9a9a8fe26751334b7739193a94eba741073b8a55 upstream.

The LRU mechanism may look up a resource in the process of being removed
from an object. The locking rules here are a bit unclear but it looks
currently like res->bo assignment is protected by the LRU lock, whereas
bo->resource is protected by the object lock, while *clearing* of
bo->resource is also protected by the LRU lock. This means that if
we check that bo->resource points to the LRU resource under the LRU
lock we should be safe.
So perform that check before deciding to swap out a bo. That avoids
dereferencing a NULL bo->resource in ttm_bo_swapout().

Fixes: 6a9b02899402 ("drm/ttm: move the LRU into resource handling v4")
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Philip Yang <Philip.Yang@amd.com>
Cc: Qiang Yu <qiang.yu@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.19+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230307144621.10748-2-thomas.hellstrom@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memory: tegra30-emc: fix interconnect registration race

commit 9db481c909dd6312ccfbdc7e343b50e41c727483 upstream.

The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.

Switch to using the new API where the provider is not registered until
after it has been fully initialised.

Fixes: d5ef16ba5fbe ("memory: tegra20: Support interconnect framework")
Cc: stable@vger.kernel.org # 5.11
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-21-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memory: tegra124-emc: fix interconnect registration race

commit abd9f1b49cf25eebeaba193c7707355be3f48dae upstream.

The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.

Switch to using the new API where the provider is not registered until
after it has been fully initialised.

Fixes: 380def2d4cf2 ("memory: tegra124: Support interconnect framework")
Cc: stable@vger.kernel.org # 5.12
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-19-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memory: tegra20-emc: fix interconnect registration race

commit c5587f61ec050f7e9ebb3e2da29d12af63e833d3 upstream.

The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.

Switch to using the new API where the provider is not registered until
after it has been fully initialised.

Fixes: d5ef16ba5fbe ("memory: tegra20: Support interconnect framework")
Cc: stable@vger.kernel.org # 5.11
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-20-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memory: tegra: fix interconnect registration race

commit 5553055c62683ce339f9ef5fb2a26c8331485d68 upstream.

The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.

Switch to using the new API where the provider is not registered until
after it has been fully initialised.

Fixes: 06f079816d4c ("memory: tegra-mc: Add interconnect framework")
Cc: stable@vger.kernel.org # 5.11
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-18-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: xilinx: don't make a sleepable memory allocation from an atomic context

commit 38ed310c22e7a0fc978b1f8292136a4a4a8b3051 upstream.

The following issue was discovered using lockdep:
[    6.691371] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:209
[    6.694602] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1, name: swapper/0
[    6.702431] 2 locks held by swapper/0/1:
[    6.706300]  #0: ffffff8800f6f188 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x4c/0x90
[    6.714900]  #1: ffffffc009a2abb8 (enable_lock){....}-{2:2}, at: clk_enable_lock+0x4c/0x140
[    6.723156] irq event stamp: 304030
[    6.726596] hardirqs last  enabled at (304029): [<ffffffc008d17ee0>] _raw_spin_unlock_irqrestore+0xc0/0xd0
[    6.736142] hardirqs last disabled at (304030): [<ffffffc00876bc5c>] clk_enable_lock+0xfc/0x140
[    6.744742] softirqs last  enabled at (303958): [<ffffffc0080904f0>] _stext+0x4f0/0x894
[    6.752655] softirqs last disabled at (303951): [<ffffffc0080e53b8>] irq_exit+0x238/0x280
[    6.760744] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G     U            5.15.36 #2
[    6.768048] Hardware name: xlnx,zynqmp (DT)
[    6.772179] Call trace:
[    6.774584]  dump_backtrace+0x0/0x300
[    6.778197]  show_stack+0x18/0x30
[    6.781465]  dump_stack_lvl+0xb8/0xec
[    6.785077]  dump_stack+0x1c/0x38
[    6.788345]  ___might_sleep+0x1a8/0x2a0
[    6.792129]  __might_sleep+0x6c/0xd0
[    6.795655]  kmem_cache_alloc_trace+0x270/0x3d0
[    6.800127]  do_feature_check_call+0x100/0x220
[    6.804513]  zynqmp_pm_invoke_fn+0x8c/0xb0
[    6.808555]  zynqmp_pm_clock_getstate+0x90/0xe0
[    6.813027]  zynqmp_pll_is_enabled+0x8c/0x120
[    6.817327]  zynqmp_pll_enable+0x38/0xc0
[    6.821197]  clk_core_enable+0x144/0x400
[    6.825067]  clk_core_enable+0xd4/0x400
[    6.828851]  clk_core_enable+0xd4/0x400
[    6.832635]  clk_core_enable+0xd4/0x400
[    6.836419]  clk_core_enable+0xd4/0x400
[    6.840203]  clk_core_enable+0xd4/0x400
[    6.843987]  clk_core_enable+0xd4/0x400
[    6.847771]  clk_core_enable+0xd4/0x400
[    6.851555]  clk_core_enable_lock+0x24/0x50
[    6.855683]  clk_enable+0x24/0x40
[    6.858952]  fclk_probe+0x84/0xf0
[    6.862220]  platform_probe+0x8c/0x110
[    6.865918]  really_probe+0x110/0x5f0
[    6.869530]  __driver_probe_device+0xcc/0x210
[    6.873830]  driver_probe_device+0x64/0x140
[    6.877958]  __driver_attach+0x114/0x1f0
[    6.881828]  bus_for_each_dev+0xe8/0x160
[    6.885698]  driver_attach+0x34/0x50
[    6.889224]  bus_add_driver+0x228/0x300
[    6.893008]  driver_register+0xc0/0x1e0
[    6.896792]  __platform_driver_register+0x44/0x60
[    6.901436]  fclk_driver_init+0x1c/0x28
[    6.905220]  do_one_initcall+0x104/0x590
[    6.909091]  kernel_init_freeable+0x254/0x2bc
[    6.913390]  kernel_init+0x24/0x130
[    6.916831]  ret_from_fork+0x10/0x20

Fix it by passing the GFP_ATOMIC gfp flag for the corresponding
memory allocation.

Fixes: acfdd18591ea ("firmware: xilinx: Use hash-table for api feature check")
Cc: stable <stable@kernel.org>
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20230308222602.123866-1-roman.gushchin@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it

commit f8086d1a65ac693e3fd863128352b4b11ee7324d upstream.

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

Fixes: 8d310c9107a2 ("drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable")
Cc: stable <stable@kernel.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Oskar Senft <osk@google.com>
Cc: linux-serial@vger.kernel.org
Link: https://lore.kernel.org/r/20230226053953.4681-9-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_fsl: fix handle_irq locking

commit 6e01f9a594ee0f69fb52cc8d11971612b4817f0b upstream.

The 8250 handle_irq callback is not just called from the interrupt
handler but also from a timer callback when polling (e.g. for ports
without an interrupt line). Consequently the callback must explicitly
disable interrupts to avoid a potential deadlock with another interrupt
in polled mode.

Fix up the two paths in the freescale callback that failed to re-enable
interrupts when polling.

Fixes: 853a9ae29e97 ("serial: 8250: fix handle_irq locking")
Cc: stable@vger.kernel.org # 5.13
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y/xYzqp4ogmOF5t0@kili
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230227085046.24282-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_em: Fix UART port type

commit 32e293be736b853f168cd065d9cbc1b0c69f545d upstream.

As per HW manual for  EMEV2 "R19UH0040EJ0400 Rev.4.00", the UART
IP found on EMMA mobile SoC is Register-compatible with the
general-purpose 16750 UART chip. Fix UART port type as 16750 and
enable 64-bytes fifo support.

Fixes: 22886ee96895 ("serial8250-em: Emma Mobile UART driver V2")
Cc: stable@vger.kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230227114152.22265-2-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted

commit 2411fd94ceaa6e11326e95d6ebf876cbfed28d23 upstream.

According to LPUART RM, Transmission Complete Flag becomes 0 if queuing
a break character by writing 1 to CTRL[SBK], so here need to skip
waiting for transmission complete when UARTCTRL_SBK is asserted,
otherwise the kernel may stuck here.
And actually set_termios() adds transmission completion waiting to avoid
data loss or data breakage when changing the baud rate, but we don't
need to worry about this when queuing break characters.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20230223093941.31790-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency"

commit 2d638be71155b2e036aca1966b6129e2d661e91f upstream.

This reverts commit 5779a072c248db7a40cfd0f5ea958097fd1d9a30.

This results in a link error of

ld: drivers/tty/serial/earlycon.o: in function `parse_options':
drivers/tty/serial/earlycon.c:99: undefined reference to `uart_parse_earlycon'

When the config is in this state

CONFIG_SERIAL_CORE=m
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_FSL_LPUART=m
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y

Fixes: 5779a072c248 ("tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency")
Cc: stable <stable@kernel.org>
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230226173846.236691-1-trix@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix possible double unlock when moving a directory

commit 70e42feab2e20618ddd0cbfc4ab4b08628236ecd upstream.

Fixes: 0813299c586b ("ext4: Fix possible corruption when moving a directory")
Link: https://lore.kernel.org/r/5efbe1b9-ad8b-4a4f-b422-24824d2b775c@kili.mountain
Reported-by: Dan Carpenter <error27@gmail.com>
Reported-by: syzbot+0c73d1d8b952c5f3d714@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes

[ Upstream commit 031f196d1b1b6d5dfcb0533b431e3ab1750e6189 ]

[WHY]
When PTEBufferSizeInRequests is zero, UBSAN reports the following
warning because dml_log2 returns an unexpected negative value:

  shift exponent 4294966273 is too large for 32-bit type 'int'

[HOW]

In the case PTEBufferSizeInRequests is zero, skip the dml_log2() and
assign the result directly.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix ttm_bo calltrace warning in psp_hw_fini

[ Upstream commit 23f4a2d29ba57bf88095f817de5809d427fcbe7e ]

The call trace occurs when the amdgpu is removed after
the mode1 reset. During mode1 reset, from suspend to resume,
there is no need to reinitialize the ta firmware buffer
which caused the bo pin_count increase redundantly.

[  489.885525] Call Trace:
[  489.885525]  <TASK>
[  489.885526]  amdttm_bo_put+0x34/0x50 [amdttm]
[  489.885529]  amdgpu_bo_free_kernel+0xe8/0x130 [amdgpu]
[  489.885620]  psp_free_shared_bufs+0xb7/0x150 [amdgpu]
[  489.885720]  psp_hw_fini+0xce/0x170 [amdgpu]
[  489.885815]  amdgpu_device_fini_hw+0x2ff/0x413 [amdgpu]
[  489.885960]  ? blocking_notifier_chain_unregister+0x56/0xb0
[  489.885962]  amdgpu_driver_unload_kms+0x51/0x60 [amdgpu]
[  489.886049]  amdgpu_pci_remove+0x5a/0x140 [amdgpu]
[  489.886132]  ? __pm_runtime_resume+0x60/0x90
[  489.886134]  pci_device_remove+0x3e/0xb0
[  489.886135]  __device_release_driver+0x1ab/0x2a0
[  489.886137]  driver_detach+0xf3/0x140
[  489.886138]  bus_remove_driver+0x6c/0xf0
[  489.886140]  driver_unregister+0x31/0x60
[  489.886141]  pci_unregister_driver+0x40/0x90
[  489.886142]  amdgpu_exit+0x15/0x451 [amdgpu]

Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Signed-off-by: longlyao <Longlong.Yao@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sh: intc: Avoid spurious sizeof-pointer-div warning

[ Upstream commit 250870824c1cf199b032b1ef889c8e8d69d9123a ]

GCC warns about the pattern sizeof(void*)/sizeof(void), as it looks like
the abuse of a pattern to calculate the array size. This pattern appears
in the unevaluated part of the ternary operator in _INTC_ARRAY if the
parameter is NULL.

The replacement uses an alternate approach to return 0 in case of NULL
which does not generate the pattern sizeof(void*)/sizeof(void), but still
emits the warning if _INTC_ARRAY is called with a nonarray parameter.

This patch is required for successful compilation with -Werror enabled.

The idea to use _Generic for type distinction is taken from Comment #7
in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108483 by Jakub Jelinek

Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/619fa552-c988-35e5-b1d7-fe256c46a272@mkarcher.dialup.fu-berlin.de
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

LoongArch: Only call get_timer_irq() once in constant_clockevent_init()

[ Upstream commit bb7a78e343468873bf00b2b181fcfd3c02d8cb56 ]

Under CONFIG_DEBUG_ATOMIC_SLEEP=y and CONFIG_DEBUG_PREEMPT=y, we can see
the following messages on LoongArch, this is because using might_sleep()
in preemption disable context.

[    0.001127] smp: Bringing up secondary CPUs ...
[    0.001222] Booting CPU#1...
[    0.001244] 64-bit Loongson Processor probed (LA464 Core)
[    0.001247] CPU1 revision is: 0014c012 (Loongson-64bit)
[    0.001250] FPU1 revision is: 00000000
[    0.001252] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
[    0.001255] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
[    0.001257] preempt_count: 1, expected: 0
[    0.001258] RCU nest depth: 0, expected: 0
[    0.001259] Preemption disabled at:
[    0.001261] [<9000000000223800>] arch_dup_task_struct+0x20/0x110
[    0.001272] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.2.0-rc7+ #43
[    0.001275] Hardware name: Loongson Loongson-3A5000-7A1000-1w-A2101/Loongson-LS3A5000-7A1000-1w-A2101, BIOS vUDK2018-LoongArch-V4.0.05132-beta10 12/13/202
[    0.001277] Stack : 0072617764726148 0000000000000000 9000000000222f1c 90000001001e0000
[    0.001286]         90000001001e3be0 90000001001e3be8 0000000000000000 0000000000000000
[    0.001292]         90000001001e3be8 0000000000000040 90000001001e3cb8 90000001001e3a50
[    0.001297]         9000000001642000 90000001001e3be8 be694d10ce4139dd 9000000100174500
[    0.001303]         0000000000000001 0000000000000001 00000000ffffe0a2 0000000000000020
[    0.001309]         000000000000002f 9000000001354116 00000000056b0000 ffffffffffffffff
[    0.001314]         0000000000000000 0000000000000000 90000000014f6e90 9000000001642000
[    0.001320]         900000000022b69c 0000000000000001 0000000000000000 9000000001736a90
[    0.001325]         9000000100038000 0000000000000000 9000000000222f34 0000000000000000
[    0.001331]         00000000000000b0 0000000000000004 0000000000000000 0000000000070000
[    0.001337]         ...
[    0.001339] Call Trace:
[    0.001342] [<9000000000222f34>] show_stack+0x5c/0x180
[    0.001346] [<90000000010bdd80>] dump_stack_lvl+0x60/0x88
[    0.001352] [<9000000000266418>] __might_resched+0x180/0x1cc
[    0.001356] [<90000000010c742c>] mutex_lock+0x20/0x64
[    0.001359] [<90000000002a8ccc>] irq_find_matching_fwspec+0x48/0x124
[    0.001364] [<90000000002259c4>] constant_clockevent_init+0x68/0x204
[    0.001368] [<900000000022acf4>] start_secondary+0x40/0xa8
[    0.001371] [<90000000010c0124>] smpboot_entry+0x60/0x64

Here are the complete call chains:

smpboot_entry()
  start_secondary()
    constant_clockevent_init()
      get_timer_irq()
        irq_find_matching_fwnode()
          irq_find_matching_fwspec()
            mutex_lock()
              might_sleep()
                __might_sleep()
                  __might_resched()

In order to avoid the above issue, we should break the call chains,
using timer_irq_installed variable as check condition to only call
get_timer_irq() once in constant_clockevent_init() is a simple and
proper way.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/9p: fix bug in client create for .L

[ Upstream commit 3866584a1c56a2bbc8c0981deb4476d0b801969e ]

We are supposed to set fid->mode to reflect the flags
that were used to open the file.  We were actually setting
it to the creation mode which is the default perms of the
file not the flags the file was opened with.

Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Reviewed-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix an illegal memory access

[ Upstream commit 4fc8fff378b2f2039f2a666d9f8c570f4e58352c ]

In the kfd_wait_on_events() function, the kfd_event_waiter structure is
allocated by alloc_event_waiters(), but the event field of the waiter
structure is not initialized; When copy_from_user() fails in the
kfd_wait_on_events() function, it will enter exception handling to
release the previously allocated memory of the waiter structure;
Due to the event field of the waiters structure being accessed
in the free_waiters() function, this results in illegal memory access
and system crash, here is the crash log:

localhost kernel: RIP: 0010:native_queued_spin_lock_slowpath+0x185/0x1e0
localhost kernel: RSP: 0018:ffffaa53c362bd60 EFLAGS: 00010082
localhost kernel: RAX: ff3d3d6bff4007cb RBX: 0000000000000282 RCX: 00000000002c0000
localhost kernel: RDX: ffff9e855eeacb80 RSI: 000000000000279c RDI: ffffe7088f6a21d0
localhost kernel: RBP: ffffe7088f6a21d0 R08: 00000000002c0000 R09: ffffaa53c362be64
localhost kernel: R10: ffffaa53c362bbd8 R11: 0000000000000001 R12: 0000000000000002
localhost kernel: R13: ffff9e7ead15d600 R14: 0000000000000000 R15: ffff9e7ead15d698
localhost kernel: FS:  0000152a3d111700(0000) GS:ffff9e855ee80000(0000) knlGS:0000000000000000
localhost kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
localhost kernel: CR2: 0000152938000010 CR3: 000000044d7a4000 CR4: 00000000003506e0
localhost kernel: Call Trace:
localhost kernel: _raw_spin_lock_irqsave+0x30/0x40
localhost kernel: remove_wait_queue+0x12/0x50
localhost kernel: kfd_wait_on_events+0x1b6/0x490 [hydcu]
localhost kernel: ? ftrace_graph_caller+0xa0/0xa0
localhost kernel: kfd_ioctl+0x38c/0x4a0 [hydcu]
localhost kernel: ? kfd_ioctl_set_trap_handler+0x70/0x70 [hydcu]
localhost kernel: ? kfd_ioctl_create_queue+0x5a0/0x5a0 [hydcu]
localhost kernel: ? ftrace_graph_caller+0xa0/0xa0
localhost kernel: __x64_sys_ioctl+0x8e/0xd0
localhost kernel: ? syscall_trace_enter.isra.18+0x143/0x1b0
localhost kernel: do_syscall_64+0x33/0x80
localhost kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9
localhost kernel: RIP: 0033:0x152a4dff68d7

Allocate the structure with kcalloc, and remove redundant 0-initialization
and a redundant loop condition check.

Signed-off-by: Qu Huang <qu.huang@linux.dev>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: fix task hung in ext4_xattr_delete_inode

[ Upstream commit 0f7bfd6f8164be32dbbdf36aa1e5d00485c53cd7 ]

Syzbot reported a hung task problem:
==================================================================
INFO: task syz-executor232:5073 blocked for more than 143 seconds.
      Not tainted 6.2.0-rc2-syzkaller-00024-g512dee0c00ad #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-exec232 state:D stack:21024 pid:5073 ppid:5072 flags:0x00004004
Call Trace:
 <TASK>
 context_switch kernel/sched/core.c:5244 [inline]
 __schedule+0x995/0xe20 kernel/sched/core.c:6555
 schedule+0xcb/0x190 kernel/sched/core.c:6631
 __wait_on_freeing_inode fs/inode.c:2196 [inline]
 find_inode_fast+0x35a/0x4c0 fs/inode.c:950
 iget_locked+0xb1/0x830 fs/inode.c:1273
 __ext4_iget+0x22e/0x3ed0 fs/ext4/inode.c:4861
 ext4_xattr_inode_iget+0x68/0x4e0 fs/ext4/xattr.c:389
 ext4_xattr_inode_dec_ref_all+0x1a7/0xe50 fs/ext4/xattr.c:1148
 ext4_xattr_delete_inode+0xb04/0xcd0 fs/ext4/xattr.c:2880
 ext4_evict_inode+0xd7c/0x10b0 fs/ext4/inode.c:296
 evict+0x2a4/0x620 fs/inode.c:664
 ext4_orphan_cleanup+0xb60/0x1340 fs/ext4/orphan.c:474
 __ext4_fill_super fs/ext4/super.c:5516 [inline]
 ext4_fill_super+0x81cd/0x8700 fs/ext4/super.c:5644
 get_tree_bdev+0x400/0x620 fs/super.c:1282
 vfs_get_tree+0x88/0x270 fs/super.c:1489
 do_new_mount+0x289/0xad0 fs/namespace.c:3145
 do_mount fs/namespace.c:3488 [inline]
 __do_sys_mount fs/namespace.c:3697 [inline]
 __se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fa5406fd5ea
RSP: 002b:00007ffc7232f968 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fa5406fd5ea
RDX: 0000000020000440 RSI: 0000000020000000 RDI: 00007ffc7232f970
RBP: 00007ffc7232f970 R08: 00007ffc7232f9b0 R09: 0000000000000432
R10: 0000000000804a03 R11: 0000000000000202 R12: 0000000000000004
R13: 0000555556a7a2c0 R14: 00007ffc7232f9b0 R15: 0000000000000000
 </TASK>
==================================================================

The problem is that the inode contains an xattr entry with ea_inum of 15
when cleaning up an orphan inode <15>. When evict inode <15>, the reference
counting of the corresponding EA inode is decreased. When EA inode <15> is
found by find_inode_fast() in __ext4_iget(), it is found that the EA inode
holds the I_FREEING flag and waits for the EA inode to complete deletion.
As a result, when inode <15> is being deleted, we wait for inode <15> to
complete the deletion, resulting in an infinite loop and triggering Hung
Task. To solve this problem, we only need to check whether the ino of EA
inode and parent is the same before getting EA inode.

Link: https://syzkaller.appspot.com/bug?extid=77d6fcc37bbb92f26048
Reported-by: syzbot+77d6fcc37bbb92f26048@syzkaller.appspotmail.com
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230110133436.996350-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: update s_journal_inum if it changes after journal replay

[ Upstream commit 3039d8b8692408438a618fac2776b629852663c3 ]

When mounting a crafted ext4 image, s_journal_inum may change after journal
replay, which is obviously unreasonable because we have successfully loaded
and replayed the journal through the old s_journal_inum. And the new
s_journal_inum bypasses some of the checks in ext4_get_journal(), which
may trigger a null pointer dereference problem. So if s_journal_inum
changes after the journal replay, we ignore the change, and rewrite the
current journal_inum to the superblock.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216541
Reported-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230107032126.4165860-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>