ALSA: hda: Fix Oops by 9.1 surround channel names

commit 3b44ec8c5c44790a82f07e90db45643c762878c6 upstream.

get_line_out_pfx() may trigger an Oops by overflowing the static array
with more than 8 channels.  This was reported for MacBookPro 12,1 with
Cirrus codec.

As a workaround, extend for the 9.1 channels and also fix the
potential Oops by unifying the code paths accessing the same array
with the proper size check.

Reported-by: Olliver Schinagl <oliver@schinagl.nl>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/64d95eb0-dbdb-cff8-a8b1-988dc22b24cd@schinagl.nl
Link: https://lore.kernel.org/r/20230516184412.24078-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Fix incorrect tracking of free space on transfer rings

commit fe82f16aafdaf8002281d3b9524291d4a4a28460 upstream.

This incorrect tracking caused unnecessary ring expansion in some
usecases which over days of use consume a lot of memory.

xhci driver tries to keep track of free transfer blocks (TRBs) on the
ring buffer, but failed to add back some cancelled transfers that were
turned into no-op operations instead of just moving past them.

This can happen if there are several queued pending transfers which
then are cancelled in reverse order.

Solve this by counting the numer of steps we move the dequeue pointer
once we complete a transfer, and add it to the number of free trbs
instead of just adding the trb number of the current transfer.
This way we ensure we count the no-op trbs on the way as well.

Fixes: 55f6153d8cc8 ("xhci: remove extra loop in interrupt context")
Cc: stable@vger.kernel.org
Reported-by: Miller Hunter <MillerH@hearthnhome.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217242
Tested-by: Miller Hunter <MillerH@hearthnhome.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230515134059.161110-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci-pci: Only run d3cold avoidance quirk for s2idle

commit 2a821fc3136d5d99dcb9de152be8a052ca27d870 upstream.

Donghun reports that a notebook that has an AMD Ryzen 5700U but supports
S3 has problems with USB after resuming from suspend. The issue was
bisected down to commit d1658268e439 ("usb: pci-quirks: disable D3cold on
xhci suspend for s2idle on AMD Renoir").

As this issue only happens on S3, narrow the broken D3cold quirk to only
run in s2idle.

Fixes: d1658268e439 ("usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir")
Reported-and-tested-by: Donghun Yoon <donghun.yoon@lge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230515134059.161110-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: gadget: udc: core: Invoke usb_gadget_connect only when started"

commit f22e9b67f19ccc73de1ae04375d4b30684e261f8 upstream.

This reverts commit 0db213ea8eed5534a5169e807f28103cbc9d23df.

It introduces an issues with configuring the USB gadget hangs forever
on multiple Qualcomm and NXP i.MX SoC at least.

Cc: stable@vger.kernel.org
Fixes: 0db213ea8eed ("usb: gadget: udc: core: Invoke usb_gadget_connect only when started")
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/all/ZF4BvgsOyoKxdPFF@francesco-nb.int.toradex.com/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230512131435.205464-3-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: gadget: udc: core: Prevent redundant calls to pullup"

commit 5e1617210aede9f1b91bb9819c93097b6da481f9 upstream.

This reverts commit a3afbf5cc887fc3401f012fe629810998ed61859.

This depends on commit 0db213ea8eed ("usb: gadget: udc: core: Invoke
usb_gadget_connect only when started") that introduces a regression,
revert it till the issue is fixed.

Cc: stable@vger.kernel.org
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/all/ZF4BvgsOyoKxdPFF@francesco-nb.int.toradex.com/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230512131435.205464-2-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: altmodes/displayport: fix pin_assignment_show

commit d8f28269dd4bf9b55c3fb376ae31512730a96fce upstream.

This patch fixes negative indexing of buf array in pin_assignment_show
when get_current_pin_assignments returns 0 i.e. no compatible pin
assignments are found.

BUG: KASAN: use-after-free in pin_assignment_show+0x26c/0x33c
...
Call trace:
dump_backtrace+0x110/0x204
dump_stack_lvl+0x84/0xbc
print_report+0x358/0x974
kasan_report+0x9c/0xfc
__do_kernel_fault+0xd4/0x2d4
do_bad_area+0x48/0x168
do_tag_check_fault+0x24/0x38
do_mem_abort+0x6c/0x14c
el1_abort+0x44/0x68
el1h_64_sync_handler+0x64/0xa4
el1h_64_sync+0x78/0x7c
pin_assignment_show+0x26c/0x33c
dev_attr_show+0x50/0xc0

Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230508214443.893436-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: u_ether: Fix host MAC address case

commit 3c0f4f09c063e143822393d99cb2b19a85451c07 upstream.

The CDC-ECM specification [1] requires to send the host MAC address as
an uppercase hexadecimal string in chapter "5.4 Ethernet Networking
Functional Descriptor":
    The Unicode character is chosen from the set of values 30h through
    39h and 41h through 46h (0-9 and A-F).

However, snprintf(.., "%pm", ..) generates a lowercase MAC address
string. While most host drivers are tolerant to this, UsbNcm.sys on
Windows 10 is not. Instead it uses a different MAC address with all
bytes set to zero including and after the first byte containing a
lowercase letter. On Windows 11 Microsoft fixed it, but apparently they
did not backport the fix.

This change fixes the issue by upper-casing the MAC to comply with the
specification.

[1]: https://www.usb.org/document-library/class-definitions-communication-devices-12, file ECM120.pdf

Fixes: bcd4a1c40bee ("usb: gadget: u_ether: construct with default values and add setters/getters")
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Gräfe <k.graefe@gateware.de>
Link: https://lore.kernel.org/r/20230505143640.443014-1-k.graefe@gateware.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: debugfs: Resume dwc3 before accessing registers

commit 614ce6a2ea50068b45339257891e51e639ac9001 upstream.

When the dwc3 device is runtime suspended, various required clocks are in
disabled state and it is not guaranteed that access to any registers would
work. Depending on the SoC glue, a register read could be as benign as
returning 0 or be fatal enough to hang the system.

In order to prevent such scenarios of fatal errors, make sure to resume
dwc3 then allow the function to proceed.

Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable@vger.kernel.org #3.2: 30332eeefec8: debugfs: regset32: Add Runtime PM support
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230509144836.6803-1-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume()

commit c8540870af4ce6ddeb27a7bb5498b75fb29b643c upstream.

Prevent -ETIMEDOUT error on .suspend().
e.g. If gadget driver is loaded and we are connected to a USB host,
all transfers must be stopped before stopping the controller else
we will not get a clean stop i.e. dwc3_gadget_run_stop() will take
several seconds to complete and will return -ETIMEDOUT.

Handle error cases properly in dwc3_gadget_suspend().
Simplify dwc3_gadget_resume() by using the introduced helper function.

Fixes: 9f8a67b65a49 ("usb: dwc3: gadget: fix gadget suspend/resume")
Cc: stable@vger.kernel.org
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230503110048.30617-1-rogerq@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: UHCI: adjust zhaoxin UHCI controllers OverCurrent bit value

commit dddb342b5b9e482bb213aecc08cbdb201ea4f8da upstream.

OverCurrent condition is not standardized in the UHCI spec.
Zhaoxin UHCI controllers report OverCurrent bit active off.
In order to handle OverCurrent condition correctly, the uhci-hcd
driver needs to be told to expect the active-off behavior.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230423105952.4526-1-WeitaoWang-oc@zhaoxin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb-storage: fix deadlock when a scsi command timeouts more than once

commit a398d5eac6984316e71474e25b975688f282379b upstream.

With faulty usb-storage devices, read/write can timeout, in that case
the SCSI layer will abort and re-issue the command. USB storage has no
internal timeout, it relies on SCSI layer aborting commands via
.eh_abort_handler() for non those responsive devices.

After two consecutive timeouts of the same command, SCSI layer calls
.eh_device_reset_handler(), without calling .eh_abort_handler() first.

With usb-storage, this causes a deadlock:

  -> .eh_device_reset_handler
    -> device_reset
      -> mutex_lock(&(us->dev_mutex));

mutex already by usb_stor_control_thread(), which is waiting for
command completion:

  -> usb_stor_control_thread (mutex taken here)
    -> usb_stor_invoke_transport
      -> usb_stor_Bulk_transport
        -> usb_stor_bulk_srb
  -> usb_stor_bulk_transfer_sglist
    -> usb_sg_wait

Make sure we cancel any pending command in .eh_device_reset_handler()
to avoid this.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Cc: linux-usb@vger.kernel.org
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/all/ZEllnjMKT8ulZbJh@sakura/
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230505114759.1189741-1-mbizon@freebox.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: usbtmc: Fix direction for 0-length ioctl control messages

commit 94d25e9128988c6a1fc9070f6e98215a95795bd8 upstream.

The syzbot fuzzer found a problem in the usbtmc driver: When a user
submits an ioctl for a 0-length control transfer, the driver does not
check that the direction is set to OUT:

------------[ cut here ]------------
usb 3-1: BOGUS control dir, pipe 80000b80 doesn't match bRequestType fd
WARNING: CPU: 0 PID: 5100 at drivers/usb/core/urb.c:411 usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
Modules linked in:
CPU: 0 PID: 5100 Comm: syz-executor428 Not tainted 6.3.0-syzkaller-12049-g58390c8ce1bd #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023
RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
Code: 7c 24 40 e8 1b 13 5c fb 48 8b 7c 24 40 e8 21 1d f0 fe 45 89 e8 44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 e0 b5 fc 8a e8 19 c8 23 fb <0f> 0b e9 9f ee ff ff e8 ed 12 5c fb 0f b6 1d 12 8a 3c 08 31 ff 41
RSP: 0018:ffffc90003d2fb00 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8880789e9058 RCX: 0000000000000000
RDX: ffff888029593b80 RSI: ffffffff814c1447 RDI: 0000000000000001
RBP: ffff88801ea742f8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88802915e528
R13: 00000000000000fd R14: 0000000080000b80 R15: ffff8880222b3100
FS:  0000555556ca63c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f9ef4d18150 CR3: 0000000073e5b000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58
 usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
 usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153
 usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1954 [inline]
 usbtmc_ioctl+0x1b3d/0x2840 drivers/usb/class/usbtmc.c:2097

To fix this, we must override the direction in the bRequestType field
of the control request structure when the length is 0.

Reported-and-tested-by: syzbot+ce77725b89b7bd52425c@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/linux-usb/000000000000716a3705f9adb8ee@google.com/
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ede1ee02-b718-49e7-a44c-51339fec706b@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add a sample rate workaround for Line6 Pod Go

commit 359b4315471181f108723c61612d96e383e56179 upstream.

Line6 Pod Go (0e41:424b) requires the similar workaround for the fixed
48k sample rate like other Line6 models.  This patch adds the
corresponding entry to line6_parse_audio_format_rate_quirk().

Reported-by: John Humlick <john@humlick.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230512075858.22813-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bridge: always declare tunnel functions

[ Upstream commit 89dcd87ce534a3a7f267cfd58505803006f51301 ]

When CONFIG_BRIDGE_VLAN_FILTERING is disabled, two functions are still
defined but have no prototype or caller. This causes a W=1 warning for
the missing prototypes:

net/bridge/br_netlink_tunnel.c:29:6: error: no previous prototype for 'vlan_tunid_inrange' [-Werror=missing-prototypes]
net/bridge/br_netlink_tunnel.c:199:5: error: no previous prototype for 'br_vlan_tunnel_info' [-Werror=missing-prototypes]

The functions are already contitional on CONFIG_BRIDGE_VLAN_FILTERING,
and I coulnd't easily figure out the right set of #ifdefs, so just
move the declarations out of the #ifdef to avoid the warning,
at a small cost in code size over a more elaborate fix.

Fixes: 188c67dd1906 ("net: bridge: vlan options: add support for tunnel id dumping")
Fixes: 569da0822808 ("net: bridge: vlan options: add support for tunnel mapping set/del")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230516194625.549249-3-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_set_rbtree: fix null deref on element insertion

[ Upstream commit 61ae320a29b0540c16931816299eb86bf2b66c08 ]

There is no guarantee that rb_prev() will not return NULL in nft_rbtree_gc_elem():

general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
 nft_add_set_elem+0x14b0/0x2990
  nf_tables_newsetelem+0x528/0xb30

Furthermore, there is a possible use-after-free while iterating,
'node' can be free'd so we need to cache the next value to use.

Fixes: c9e6978e2725 ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: fix nft_trans type confusion

[ Upstream commit e3c361b8acd636f5fe80c02849ca175201edf10c ]

nft_trans_FOO objects all share a common nft_trans base structure, but
trailing fields depend on the real object size. Access is only safe after
trans->msg_type check.

Check for rule type first.  Found by code inspection.

Fixes: 1a94e38d254b ("netfilter: nf_tables: add NFTA_RULE_ID attribute")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: selftests: Fix optstring

[ Upstream commit 9ba9485b87ac97fd159abdb4cbd53099bc9f01c6 ]

The cited commit added a stray colon to the 'v' option. That makes the
option work incorrectly.

ex:
tools/testing/selftests/net# ./fib_nexthops.sh -v
(should enable verbose mode, instead it shows help text due to missing arg)

Fixes: 5feba4727395 ("selftests: fib_nexthops: Make ping timeout configurable")
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: pcs: xpcs: fix C73 AN not getting enabled

[ Upstream commit c46e78ba9a7a09da4f192dc8df15c4e8a07fb9e0 ]

The XPCS expects clause 73 (copper backplane) autoneg to follow the
ethtool autoneg bit. It actually did that until the blamed
commit inaptly replaced state->an_enabled (coming from ethtool) with
phylink_autoneg_inband() (coming from the device tree or struct
phylink_config), as part of an unrelated phylink_pcs API conversion.

Russell King suggests that state->an_enabled from the original code was
just a proxy for the ethtool Autoneg bit, and that the correct way of
restoring the functionality is to check for this bit in the advertising
mask.

Fixes: 11059740e616 ("net: pcs: xpcs: convert to phylink_pcs_ops")
Link: https://lore.kernel.org/netdev/ZGNt2MFeRolKGFck@shell.armlinux.org.uk/
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: wwan: iosm: fix NULL pointer dereference when removing device

[ Upstream commit 60829145f1e2650b31ebe6a0ec70a9725b38fa2c ]

In suspend and resume cycle, the removal and rescan of device ends
up in NULL pointer dereference.

During driver initialization, if the ipc_imem_wwan_channel_init()
fails to get the valid device capabilities it returns an error and
further no resource (wwan struct) will be allocated. Now in this
situation if driver removal procedure is initiated it would result
in NULL pointer exception since unallocated wwan struct is dereferenced
inside ipc_wwan_deinit().

ipc_imem_run_state_worker() to handle the called functions return value
and to release the resource in failure case. It also reports the link
down event in failure cases. The user space application can handle this
event to do a device reset for restoring the device communication.

Fixes: 3670970dd8c6 ("net: iosm: shared memory IPC interface")
Reported-by: Samuel Wein PhD <sam@samwein.com>
Closes: https://lore.kernel.org/netdev/20230427140819.1310f4bd@kernel.org/T/
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit()

[ Upstream commit dacab578c7c6cd06c50c89dfa36b0e0f10decd4e ]

syzbot triggered the following splat [1], sending an empty message
through pppoe_sendmsg().

When VLAN_FLAG_REORDER_HDR flag is set, vlan_dev_hard_header()
does not push extra bytes for the VLAN header, because vlan is offloaded.

Unfortunately vlan_dev_hard_start_xmit() first reads veth->h_vlan_proto
before testing (vlan->flags & VLAN_FLAG_REORDER_HDR).

We need to swap the two conditions.

[1]
BUG: KMSAN: uninit-value in vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111
vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111
__netdev_start_xmit include/linux/netdevice.h:4883 [inline]
netdev_start_xmit include/linux/netdevice.h:4897 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x253/0xa20 net/core/dev.c:3596
__dev_queue_xmit+0x3c7f/0x5ac0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3053 [inline]
pppoe_sendmsg+0xa93/0xb80 drivers/net/ppp/pppoe.c:900
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0xa24/0xe40 net/socket.c:2501
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555
__sys_sendmmsg+0x411/0xa50 net/socket.c:2641
__do_sys_sendmmsg net/socket.c:2670 [inline]
__se_sys_sendmmsg net/socket.c:2667 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Uninit was created at:
slab_post_alloc_hook+0x12d/0xb60 mm/slab.h:774
slab_alloc_node mm/slub.c:3452 [inline]
kmem_cache_alloc_node+0x543/0xab0 mm/slub.c:3497
kmalloc_reserve+0x148/0x470 net/core/skbuff.c:520
__alloc_skb+0x3a7/0x850 net/core/skbuff.c:606
alloc_skb include/linux/skbuff.h:1277 [inline]
sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2583
pppoe_sendmsg+0x3af/0xb80 drivers/net/ppp/pppoe.c:867
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0xa24/0xe40 net/socket.c:2501
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555
__sys_sendmmsg+0x411/0xa50 net/socket.c:2641
__do_sys_sendmmsg net/socket.c:2670 [inline]
__se_sys_sendmmsg net/socket.c:2667 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

CPU: 0 PID: 29770 Comm: syz-executor.0 Not tainted 6.3.0-rc6-syzkaller-gc478e5b17829 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igb: fix bit_shift to be in [1..8] range

[ Upstream commit 60d758659f1fb49e0d5b6ac2691ede8c0958795b ]

In igb_hash_mc_addr() the expression:
        "mc_addr[4] >> 8 - bit_shift", right shifting "mc_addr[4]"
shift by more than 7 bits always yields zero, so hash becomes not so different.
Add initialization with bit_shift = 1 and add a loop condition to ensure
bit_shift will be always in [1..8] range.

Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offset

[ Upstream commit 1323e0c6e1d7e103d59384c3ac50f72b17a6936c ]

According to datasheet, the command opcode must be specified
into bits [14:12] of the Extended Port Control register (EPC).

Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marco Migliore <m.migliore@tiesse.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cassini: Fix a memory leak in the error handling path of cas_init_one()

[ Upstream commit 412cd77a2c24b191c65ea53025222418db09817c ]

cas_saturn_firmware_init() allocates some memory using vmalloc(). This
memory is freed in the .remove() function but not it the error handling
path of the probe.

Add the missing vfree() to avoid a memory leak, should an error occur.

Fixes: fcaa40669cd7 ("cassini: use request_firmware")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tun: Fix memory leak for detached NAPI queue.

[ Upstream commit 82b2bc279467c875ec36f8ef820f00997c2a4e8e ]

syzkaller reported [0] memory leaks of sk and skb related to the TUN
device with no repro, but we can reproduce it easily with:

  struct ifreq ifr = {}
  int fd_tun, fd_tmp;
  char buf[4] = {};

  fd_tun = openat(AT_FDCWD, "/dev/net/tun", O_WRONLY, 0);
  ifr.ifr_flags = IFF_TUN | IFF_NAPI | IFF_MULTI_QUEUE;
  ioctl(fd_tun, TUNSETIFF, &ifr);

  ifr.ifr_flags = IFF_DETACH_QUEUE;
  ioctl(fd_tun, TUNSETQUEUE, &ifr);

  fd_tmp = socket(AF_PACKET, SOCK_PACKET, 0);
  ifr.ifr_flags = IFF_UP;
  ioctl(fd_tmp, SIOCSIFFLAGS, &ifr);

  write(fd_tun, buf, sizeof(buf));
  close(fd_tun);

If we enable NAPI and multi-queue on a TUN device, we can put skb into
tfile->sk.sk_write_queue after the queue is detached.  We should prevent
it by checking tfile->detached before queuing skb.

Note this must be done under tfile->sk.sk_write_queue.lock because write()
and ioctl(IFF_DETACH_QUEUE) can run concurrently.  Otherwise, there would
be a small race window:

  write()                             ioctl(IFF_DETACH_QUEUE)
  `- tun_get_user                     `- __tun_detach
     |- if (tfile->detached)             |- tun_disable_queue
     |  `-> false                        |  `- tfile->detached = tun
     |                                   `- tun_queue_purge
     |- spin_lock_bh(&queue->lock)
     `- __skb_queue_tail(queue, skb)

Another solution is to call tun_queue_purge() when closing and
reattaching the detached queue, but it could paper over another
problems.  Also, we do the same kind of test for IFF_NAPI_FRAGS.

[0]:
unreferenced object 0xffff88801edbc800 (size 2048):
  comm "syz-executor.1", pid 33269, jiffies 4295743834 (age 18.756s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00  ...@............
  backtrace:
    [<000000008c16ea3d>] __do_kmalloc_node mm/slab_common.c:965 [inline]
    [<000000008c16ea3d>] __kmalloc+0x4a/0x130 mm/slab_common.c:979
    [<000000003addde56>] kmalloc include/linux/slab.h:563 [inline]
    [<000000003addde56>] sk_prot_alloc+0xef/0x1b0 net/core/sock.c:2035
    [<000000003e20621f>] sk_alloc+0x36/0x2f0 net/core/sock.c:2088
    [<0000000028e43843>] tun_chr_open+0x3d/0x190 drivers/net/tun.c:3438
    [<000000001b0f1f28>] misc_open+0x1a6/0x1f0 drivers/char/misc.c:165
    [<000000004376f706>] chrdev_open+0x111/0x300 fs/char_dev.c:414
    [<00000000614d379f>] do_dentry_open+0x2f9/0x750 fs/open.c:920
    [<000000008eb24774>] do_open fs/namei.c:3636 [inline]
    [<000000008eb24774>] path_openat+0x143f/0x1a30 fs/namei.c:3791
    [<00000000955077b5>] do_filp_open+0xce/0x1c0 fs/namei.c:3818
    [<00000000b78973b0>] do_sys_openat2+0xf0/0x260 fs/open.c:1356
    [<00000000057be699>] do_sys_open fs/open.c:1372 [inline]
    [<00000000057be699>] __do_sys_openat fs/open.c:1388 [inline]
    [<00000000057be699>] __se_sys_openat fs/open.c:1383 [inline]
    [<00000000057be699>] __x64_sys_openat+0x83/0xf0 fs/open.c:1383
    [<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80
    [<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc

unreferenced object 0xffff88802f671700 (size 240):
  comm "syz-executor.1", pid 33269, jiffies 4295743854 (age 18.736s)
  hex dump (first 32 bytes):
    68 c9 db 1e 80 88 ff ff 68 c9 db 1e 80 88 ff ff  h.......h.......
    00 c0 7b 2f 80 88 ff ff 00 c8 db 1e 80 88 ff ff  ..{/............
  backtrace:
    [<00000000e9d9fdb6>] __alloc_skb+0x223/0x250 net/core/skbuff.c:644
    [<000000002c3e4e0b>] alloc_skb include/linux/skbuff.h:1288 [inline]
    [<000000002c3e4e0b>] alloc_skb_with_frags+0x6f/0x350 net/core/skbuff.c:6378
    [<00000000825f98d7>] sock_alloc_send_pskb+0x3ac/0x3e0 net/core/sock.c:2729
    [<00000000e9eb3df3>] tun_alloc_skb drivers/net/tun.c:1529 [inline]
    [<00000000e9eb3df3>] tun_get_user+0x5e1/0x1f90 drivers/net/tun.c:1841
    [<0000000053096912>] tun_chr_write_iter+0xac/0x120 drivers/net/tun.c:2035
    [<00000000b9282ae0>] call_write_iter include/linux/fs.h:1868 [inline]
    [<00000000b9282ae0>] new_sync_write fs/read_write.c:491 [inline]
    [<00000000b9282ae0>] vfs_write+0x40f/0x530 fs/read_write.c:584
    [<00000000524566e4>] ksys_write+0xa1/0x170 fs/read_write.c:637
    [<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80
    [<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc

Fixes: cde8b15f1aab ("tuntap: add ioctl to attach or detach a file form tuntap device")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: tun: rebuild error handling in tun_get_user

[ Upstream commit ab00af85d2f886a8e4ace1342d9cc2b232eab6a8 ]

The error handling in tun_get_user is very scattered.
This patch unifies error handling, reduces duplication of code, and
makes the logic clearer.

Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 82b2bc279467 ("tun: Fix memory leak for detached NAPI queue.")
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: storvsc: Don't pass unused PFNs to Hyper-V host

[ Upstream commit 4e81a6cba517cb33584308a331f14f5e3fec369b ]

In a SCSI request, storvsc pre-allocates space for up to
MAX_PAGE_BUFFER_COUNT physical frame numbers to be passed to Hyper-V.  If
the size of the I/O request requires more PFNs, a separate memory area of
exactly the correct size is dynamically allocated.

But when the pre-allocated area is used, current code always passes
MAX_PAGE_BUFFER_COUNT PFNs to Hyper-V, even if fewer are needed.  While
this doesn't break anything because the additional PFNs are always zero,
more bytes than necessary are copied into the VMBus channel ring buffer.
This takes CPU cycles and wastes space in the ring buffer. For a typical 4
Kbyte I/O that requires only a single PFN, 248 unnecessary bytes are
copied.

Fix this by setting the payload_sz based on the actual number of PFNs
required, not the size of the pre-allocated space.

Reported-by: John Starks <jostarks@microsoft.com>
Fixes: 8f43710543ef ("scsi: storvsc: Support PAGE_SIZE larger than 4K")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1684171241-16209-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: don't trust firmware n_channels

[ Upstream commit 682b6dc29d98e857e6ca4bbc077c7dc2899b7473 ]

If the firmware sends us a corrupted MCC response with
n_channels much larger than the command response can be,
we might copy far too much (uninitialized) memory and
even crash if the n_channels is large enough to make it
run out of the one page allocated for the FW response.

Fix that by checking the lengths. Doing a < comparison
would be sufficient, but the firmware should be doing
it correctly, so check more strictly.

Fixes: dcaf9f5ecb6f ("iwlwifi: mvm: add MCC update FW API")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.d7b233139eb4.I51fd319df8e9d41881fc8450e83d78049518a79a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: fix OEM's name in the tas approved list

[ Upstream commit d0246a0e49efee0f8649d0e4f2350614cdfe6565 ]

Fix a spelling mistake.

Fixes: 2856f623ce48 ("iwlwifi: mvm: Add list of OEMs allowed to use TAS")
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.4090de6d1878.If9391ef6da78f1b2cc5eb6cb8f6965816bb7a7f5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: fix OEM's name in the ppag approved list

[ Upstream commit eca7296d9a671e9961834d2ace9cc0ce21fc15b3 ]

Fix a spelling mistake.

Fixes: e8e10a37c51c ("iwlwifi: acpi: move ppag code from mvm to fw/acpi")
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.fdd07f36a8bf.I223e5fb16ab5c95d504c3fdaffd0bd70affad1c2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: fw: fix DBGI dump

[ Upstream commit d3ae69180bbd74bcbc03a2b6d10ed7eccbe98c23 ]

The DBGI dump is (unsurprisingly) of type DBGI, not SRAM.
This leads to bad register accesses because the union is
built differently, there's no allocation ID, and thus the
allocation ID ends up being 0x8000.

Note that this was already wrong for DRAM vs. SMEM since
they use different parts of the union, but the allocation
ID is at the same place, so it worked.

Fix all of this but set the allocation ID in a way that
the offset calculation ends up without any offset.

Fixes: 34bc27783a31 ("iwlwifi: yoyo: fix DBGI_SRAM ini dump header.")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.19a302ae4c65.I12272599f7c1930666157b9d5e7f81fe9ec4c421@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: fix cancel_delayed_work_sync() deadlock

[ Upstream commit c2d8b7f257b2398f2d866205365895e038beca12 ]

Lockdep points out that we can deadlock here by calling
cancel_delayed_work_sync() because that might be already
running and gotten interrupted by the NAPI soft-IRQ.
Even just calling something that can sleep is wrong in
this context though.

Luckily, it doesn't even really matter since the things
we need to do are idempotent, so just drop the _sync().

Fixes: e5d153ec54f0 ("iwlwifi: mvm: fix CSA AP side")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.b1813c823b4d.I9d20cc06d24fa40b6774d3dd95ea5e2bf8dd015b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: Abort running color change when stopping the AP

[ Upstream commit a23d7f5b2fbda114de60c4b53311e052281d7533 ]

When stopping the AP, there might be a color change in progress. It
should be deactivated here, or the driver might later finalize a color
change on a stopped AP.

Fixes: 5f9404abdf2a (mac80211: add support for BSS color change)
Signed-off-by: Michael Lee <michael-cy.lee@mediatek.com>
Link: https://lore.kernel.org/r/20230504080441.22958-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: fix min center freq offset tracing

[ Upstream commit 248e4776514bf70236e6b1a54c65aa5324c8b1eb ]

We need to set the correct trace variable, otherwise we're
overwriting something else instead and the right one that
we print later is not initialized.

Fixes: b6011960f392 ("mac80211: handle channel frequency offset")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-2-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: fortify the spinlock against deadlock by interrupt

[ Upstream commit ef6e1997da63ad0ac3fe33153fec9524c9ae56c9 ]

In the function ieee80211_tx_dequeue() there is a particular locking
sequence:

begin:
spin_lock(&local->queue_stop_reason_lock);
q_stopped = local->queue_stop_reasons[q];
spin_unlock(&local->queue_stop_reason_lock);

However small the chance (increased by ftracetest), an asynchronous
interrupt can occur in between of spin_lock() and spin_unlock(),
and the interrupt routine will attempt to lock the same
&local->queue_stop_reason_lock again.

This will cause a costly reset of the CPU and the wifi device or an
altogether hang in the single CPU and single core scenario.

The only remaining spin_lock(&local->queue_stop_reason_lock) that
did not disable interrupts was patched, which should prevent any
deadlocks on the same CPU/core and the same wifi device.

This is the probable trace of the deadlock:

kernel: ================================
kernel: WARNING: inconsistent lock state
kernel: 6.3.0-rc6-mt-20230401-00001-gf86822a1170f #4 Tainted: G        W
kernel: --------------------------------
kernel: inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
kernel: kworker/5:0/25656 [HC0[0]:SC0[0]:HE1:SE1] takes:
kernel: ffff9d6190779478 (&local->queue_stop_reason_lock){+.?.}-{2:2}, at: return_to_handler+0x0/0x40
kernel: {IN-SOFTIRQ-W} state was registered at:
kernel:   lock_acquire+0xc7/0x2d0
kernel:   _raw_spin_lock+0x36/0x50
kernel:   ieee80211_tx_dequeue+0xb4/0x1330 [mac80211]
kernel:   iwl_mvm_mac_itxq_xmit+0xae/0x210 [iwlmvm]
kernel:   iwl_mvm_mac_wake_tx_queue+0x2d/0xd0 [iwlmvm]
kernel:   ieee80211_queue_skb+0x450/0x730 [mac80211]
kernel:   __ieee80211_xmit_fast.constprop.66+0x834/0xa50 [mac80211]
kernel:   __ieee80211_subif_start_xmit+0x217/0x530 [mac80211]
kernel:   ieee80211_subif_start_xmit+0x60/0x580 [mac80211]
kernel:   dev_hard_start_xmit+0xb5/0x260
kernel:   __dev_queue_xmit+0xdbe/0x1200
kernel:   neigh_resolve_output+0x166/0x260
kernel:   ip_finish_output2+0x216/0xb80
kernel:   __ip_finish_output+0x2a4/0x4d0
kernel:   ip_finish_output+0x2d/0xd0
kernel:   ip_output+0x82/0x2b0
kernel:   ip_local_out+0xec/0x110
kernel:   igmpv3_sendpack+0x5c/0x90
kernel:   igmp_ifc_timer_expire+0x26e/0x4e0
kernel:   call_timer_fn+0xa5/0x230
kernel:   run_timer_softirq+0x27f/0x550
kernel:   __do_softirq+0xb4/0x3a4
kernel:   irq_exit_rcu+0x9b/0xc0
kernel:   sysvec_apic_timer_interrupt+0x80/0xa0
kernel:   asm_sysvec_apic_timer_interrupt+0x1f/0x30
kernel:   _raw_spin_unlock_irqrestore+0x3f/0x70
kernel:   free_to_partial_list+0x3d6/0x590
kernel:   __slab_free+0x1b7/0x310
kernel:   kmem_cache_free+0x52d/0x550
kernel:   putname+0x5d/0x70
kernel:   do_sys_openat2+0x1d7/0x310
kernel:   do_sys_open+0x51/0x80
kernel:   __x64_sys_openat+0x24/0x30
kernel:   do_syscall_64+0x5c/0x90
kernel:   entry_SYSCALL_64_after_hwframe+0x72/0xdc
kernel: irq event stamp: 5120729
kernel: hardirqs last  enabled at (5120729): [<ffffffff9d149936>] trace_graph_return+0xd6/0x120
kernel: hardirqs last disabled at (5120728): [<ffffffff9d149950>] trace_graph_return+0xf0/0x120
kernel: softirqs last  enabled at (5069900): [<ffffffff9cf65b60>] return_to_handler+0x0/0x40
kernel: softirqs last disabled at (5067555): [<ffffffff9cf65b60>] return_to_handler+0x0/0x40
kernel:
        other info that might help us debug this:
kernel:  Possible unsafe locking scenario:
kernel:        CPU0
kernel:        ----
kernel:   lock(&local->queue_stop_reason_lock);
kernel:   <Interrupt>
kernel:     lock(&local->queue_stop_reason_lock);
kernel:
         *** DEADLOCK ***
kernel: 8 locks held by kworker/5:0/25656:
kernel:  #0: ffff9d618009d138 ((wq_completion)events_freezable){+.+.}-{0:0}, at: process_one_work+0x1ca/0x530
kernel:  #1: ffffb1ef4637fe68 ((work_completion)(&local->restart_work)){+.+.}-{0:0}, at: process_one_work+0x1ce/0x530
kernel:  #2: ffffffff9f166548 (rtnl_mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40
kernel:  #3: ffff9d6190778728 (&rdev->wiphy.mtx){+.+.}-{3:3}, at: return_to_handler+0x0/0x40
kernel:  #4: ffff9d619077b480 (&mvm->mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40
kernel:  #5: ffff9d61907bacd8 (&trans_pcie->mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40
kernel:  #6: ffffffff9ef9cda0 (rcu_read_lock){....}-{1:2}, at: iwl_mvm_queue_state_change+0x59/0x3a0 [iwlmvm]
kernel:  #7: ffffffff9ef9cda0 (rcu_read_lock){....}-{1:2}, at: iwl_mvm_mac_itxq_xmit+0x42/0x210 [iwlmvm]
kernel:
        stack backtrace:
kernel: CPU: 5 PID: 25656 Comm: kworker/5:0 Tainted: G        W          6.3.0-rc6-mt-20230401-00001-gf86822a1170f #4
kernel: Hardware name: LENOVO 82H8/LNVNB161216, BIOS GGCN51WW 11/16/2022
kernel: Workqueue: events_freezable ieee80211_restart_work [mac80211]
kernel: Call Trace:
kernel:  <TASK>
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  dump_stack_lvl+0x5f/0xa0
kernel:  dump_stack+0x14/0x20
kernel:  print_usage_bug.part.46+0x208/0x2a0
kernel:  mark_lock.part.47+0x605/0x630
kernel:  ? sched_clock+0xd/0x20
kernel:  ? trace_clock_local+0x14/0x30
kernel:  ? __rb_reserve_next+0x5f/0x490
kernel:  ? _raw_spin_lock+0x1b/0x50
kernel:  __lock_acquire+0x464/0x1990
kernel:  ? mark_held_locks+0x4e/0x80
kernel:  lock_acquire+0xc7/0x2d0
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  ? ftrace_return_to_handler+0x8b/0x100
kernel:  ? preempt_count_add+0x4/0x70
kernel:  _raw_spin_lock+0x36/0x50
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  ieee80211_tx_dequeue+0xb4/0x1330 [mac80211]
kernel:  ? prepare_ftrace_return+0xc5/0x190
kernel:  ? ftrace_graph_func+0x16/0x20
kernel:  ? 0xffffffffc02ab0b1
kernel:  ? lock_acquire+0xc7/0x2d0
kernel:  ? iwl_mvm_mac_itxq_xmit+0x42/0x210 [iwlmvm]
kernel:  ? ieee80211_tx_dequeue+0x9/0x1330 [mac80211]
kernel:  ? __rcu_read_lock+0x4/0x40
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  iwl_mvm_mac_itxq_xmit+0xae/0x210 [iwlmvm]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  iwl_mvm_queue_state_change+0x311/0x3a0 [iwlmvm]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  iwl_mvm_wake_sw_queue+0x17/0x20 [iwlmvm]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  iwl_txq_gen2_unmap+0x1c9/0x1f0 [iwlwifi]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  iwl_txq_gen2_free+0x55/0x130 [iwlwifi]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  iwl_txq_gen2_tx_free+0x63/0x80 [iwlwifi]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  _iwl_trans_pcie_gen2_stop_device+0x3f3/0x5b0 [iwlwifi]
kernel:  ? _iwl_trans_pcie_gen2_stop_device+0x9/0x5b0 [iwlwifi]
kernel:  ? mutex_lock_nested+0x4/0x30
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  iwl_trans_pcie_gen2_stop_device+0x5f/0x90 [iwlwifi]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  iwl_mvm_stop_device+0x78/0xd0 [iwlmvm]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  __iwl_mvm_mac_start+0x114/0x210 [iwlmvm]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  iwl_mvm_mac_start+0x76/0x150 [iwlmvm]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  drv_start+0x79/0x180 [mac80211]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  ieee80211_reconfig+0x1523/0x1ce0 [mac80211]
kernel:  ? synchronize_net+0x4/0x50
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  ieee80211_restart_work+0x108/0x170 [mac80211]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  process_one_work+0x250/0x530
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  worker_thread+0x48/0x3a0
kernel:  ? __pfx_worker_thread+0x10/0x10
kernel:  kthread+0x10f/0x140
kernel:  ? __pfx_kthread+0x10/0x10
kernel:  ret_from_fork+0x29/0x50
kernel:  </TASK>

Fixes: 4444bc2116ae ("wifi: mac80211: Proper mark iTXQs for resumption")
Link: https://lore.kernel.org/all/1f58a0d1-d2b9-d851-73c3-93fcc607501c@alu.unizg.hr/
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Cc: Gregory Greenman <gregory.greenman@intel.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/all/cdc80531-f25f-6f9d-b15f-25e16130b53a@alu.unizg.hr/
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: tag, or it goes automatically?
Link: https://lore.kernel.org/r/20230425164005.25272-1-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211: Drop entries with invalid BSSIDs in RNR

[ Upstream commit 1b6b4ed01493b7ea2205ab83c49198f7d13ca9d2 ]

Ignore AP information for entries that include an invalid
BSSID in the TBTT information field, e.g., all zeros BSSIDs.

Fixes: c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230424103224.5e65d04d1448.Ic10c8577ae4a85272c407106c9d0a2ecb5372743@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Fix ice VF reset during iavf initialization

[ Upstream commit 7255355a0636b4eff08d5e8139c77d98f151c4fc ]

Fix the current implementation that causes ice_trigger_vf_reset()
to start resetting the VF even when the VF-NIC is still initializing.

When we reset NIC with ice driver it can interfere with
iavf-vf initialization e.g. during consecutive resets induced by ice

iavf                ice
  |                  |
  |<-----------------|
  |            ice resets vf
 iavf                |
 reset               |
 start               |
  |<-----------------|
  |             ice resets vf
  |             causing iavf
  |             initialization
  |             error
  |                  |
 iavf
 reset
 end

This leads to a series of -53 errors
(failed to init adminq) from the IAVF.

Change the state of the vf_state field to be not active when the IAVF
is still initializing. Make sure to wait until receiving the message on
the message box to ensure that the vf is ready and initializded.

In simple terms we use the ACTIVE flag to make sure that the ice
driver knows if the iavf is ready for another reset

  iavf                  ice
    |                    |
    |                    |
    |<------------- ice resets vf
  iavf           vf_state != ACTIVE
  reset                  |
  start                  |
    |                    |
    |                    |
  iavf                   |
  reset-------> vf_state == ACTIVE
  end              ice resets vf
    |                    |
    |                    |

Fixes: c54d209c78b8 ("ice: Wait for VF to be reset/ready before configuration")
Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Acked-by: Jacob Keller <Jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: introduce clear_reset_state operation

[ Upstream commit fa4a15c85c849e92257da6dbffeb1e3a6399fd7b ]

When hardware is reset, the VF relies on the VFGEN_RSTAT register to detect
when the VF is finished resetting. This is a tri-state register where 0
indicates a reset is in progress, 1 indicates the hardware is done
resetting, and 2 indicates that the software is done resetting.

Currently the PF driver relies on the device hardware resetting VFGEN_RSTAT
when a global reset occurs. This works ok, but it does mean that the VF
might not immediately notice a reset when the driver first detects that the
global reset is occurring.

This is also problematic for Scalable IOV, because there is no read/write
equivalent VFGEN_RSTAT register for the Scalable VSI type. Instead, the
Scalable IOV VFs will need to emulate this register.

To support this, introduce a new VF operation, clear_reset_state, which is
called when the PF driver first detects a global reset. The Single Root IOV
implementation can just write to VFGEN_RSTAT to ensure it's cleared
immediately, without waiting for the actual hardware reset to begin. The
Scalable IOV implementation will use this as part of its tracking of the
reset status to allow properly reporting the emulated VFGEN_RSTAT to the VF
driver.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 7255355a0636 ("ice: Fix ice VF reset during iavf initialization")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bcmgenet: Restore phy_stop() depending upon suspend/close

[ Upstream commit 225c657945c4a6307741cb3cc89467eadcc26e9b ]

Removing the phy_stop() from bcmgenet_netif_stop() ended up causing
warnings from the PHY library that phy_start() is called from the
RUNNING state since we are no longer stopping the PHY state machine
during bcmgenet_suspend().

Restore the call to phy_stop() but make it conditional on being called
from the close or suspend path.

Fixes: c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine")
Fixes: 93e0401e0fc0 ("net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230515025608.2587012-1-f.fainelli@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()

[ Upstream commit 93e0401e0fc0c54b0ac05b687cd135c2ac38187c ]

The call to phy_stop() races with the later call to phy_disconnect(),
resulting in concurrent phy_suspend() calls being run from different
CPUs. The final call to phy_disconnect() ensures that the PHY is
stopped and suspended, too.

Fixes: c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: dev: fix missing CAN XL support in can_put_echo_skb()

[ Upstream commit 6bffdc38f9935bae49f980448f3f6be2dada0564 ]

can_put_echo_skb() checks for the enabled IFF_ECHO flag and the
correct ETH_P type of the given skbuff. When implementing the CAN XL
support the new check for ETH_P_CANXL has been forgotten.

Fixes: fb08cba12b52 ("can: canxl: update CAN infrastructure for CAN XL frames")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230506184515.39241-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cio: include subchannels without devices also for evaluation

[ Upstream commit b1b0d5aec1cf9f9a900a14964f869c68688d923e ]

Currently when the new channel-path is enabled, we do evaluation only
on the subchannels with a device connected on it. This is because,
in the past, if the device in the subchannel is not working or not
available, we used to unregister the subchannels. But, from the 'commit
2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")'
we allow subchannels with or without an active device connected
on it. So, when we do the io_subchannel_verify, make sure that,
we are evaluating the subchannels without any device too.

Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: check the bearer min mtu properly when setting it by netlink

[ Upstream commit 35a089b5d793d2bfd2cc7cfa6104545184de2ce7 ]

Checking the bearer min mtu with tipc_udp_mtu_bad() only works for
IPv4 UDP bearer, and IPv6 UDP bearer has a different value for the
min mtu. This patch checks with encap_hlen + TIPC_MIN_BEARER_MTU
for min mtu, which works for both IPv4 and IPv6 UDP bearer.

Note that tipc_udp_mtu_bad() is still used to check media min mtu
in __tipc_nl_media_set(), as m->mtu currently is only used by the
IPv4 UDP bearer as its default mtu value.

Fixes: 682cd3cf946b ("tipc: confgiure and apply UDP bearer MTU on running links")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: do not update mtu if msg_max is too small in mtu negotiation

[ Upstream commit 56077b56cd3fb78e1c8619e29581ba25a5c55e86 ]

When doing link mtu negotiation, a malicious peer may send Activate msg
with a very small mtu, e.g. 4 in Shuang's testing, without checking for
the minimum mtu, l->mtu will be set to 4 in tipc_link_proto_rcv(), then
n->links[bearer_id].mtu is set to 4294967228, which is a overflow of
'4 - INT_H_SIZE - EMSG_OVERHEAD' in tipc_link_mss().

With tipc_link.mtu = 4, tipc_link_xmit() kept printing the warning:

 tipc: Too large msg, purging xmit list 1 5 0 40 4!
 tipc: Too large msg, purging xmit list 1 15 0 60 4!

And with tipc_link_entry.mtu 4294967228, a huge skb was allocated in
named_distribute(), and when purging it in tipc_link_xmit(), a crash
was even caused:

  general protection fault, probably for non-canonical address 0x2100001011000dd: 0000 [#1] PREEMPT SMP PTI
  CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 6.3.0.neta #19
  RIP: 0010:kfree_skb_list_reason+0x7e/0x1f0
  Call Trace:
   <IRQ>
   skb_release_data+0xf9/0x1d0
   kfree_skb_reason+0x40/0x100
   tipc_link_xmit+0x57a/0x740 [tipc]
   tipc_node_xmit+0x16c/0x5c0 [tipc]
   tipc_named_node_up+0x27f/0x2c0 [tipc]
   tipc_node_write_unlock+0x149/0x170 [tipc]
   tipc_rcv+0x608/0x740 [tipc]
   tipc_udp_recv+0xdc/0x1f0 [tipc]
   udp_queue_rcv_one_skb+0x33e/0x620
   udp_unicast_rcv_skb.isra.72+0x75/0x90
   __udp4_lib_rcv+0x56d/0xc20
   ip_protocol_deliver_rcu+0x100/0x2d0

This patch fixes it by checking the new mtu against tipc_bearer_min_mtu(),
and not updating mtu if it is too small.

Fixes: ed193ece2649 ("tipc: simplify link mtu negotiation")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: add tipc_bearer_min_mtu to calculate min mtu

[ Upstream commit 3ae6d66b605be604644d4bb5708a7ffd9cf1abe8 ]

As different media may requires different min mtu, and even the
same media with different net family requires different min mtu,
add tipc_bearer_min_mtu() to calculate min mtu accordingly.

This API will be used to check the new mtu when doing the link
mtu negotiation in the next patch.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 56077b56cd3f ("tipc: do not update mtu if msg_max is too small in mtu negotiation")
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_net: Fix error unwinding of XDP initialization

[ Upstream commit 5306623a9826aa7d63b32c6a3803c798a765474d ]

When initializing XDP in virtnet_open(), some rq xdp initialization
may hit an error causing net device open failed. However, previous
rqs have already initialized XDP and enabled NAPI, which is not the
expected behavior. Need to roll back the previous rq initialization
to avoid leaks in error unwinding of init code.

Also extract helper functions of disable and enable queue pairs.
Use newly introduced disable helper function in error unwinding and
virtnet_close. Use enable helper function in virtnet_open.

Fixes: 754b8a21a96d ("virtio_net: setup xdp_rxq_info")
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: William Tu <witu@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio-net: Maintain reverse cleanup order

[ Upstream commit 27369c9c2b722617063d6b80c758ab153f1d95d4 ]

To easily audit the code, better to keep the device stop()
sequence to be mirror of the device open() sequence.

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 5306623a9826 ("virtio_net: Fix error unwinding of XDP initialization")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: nsh: Use correct mac_offset to unwind gso skb in nsh_gso_segment()

[ Upstream commit c83b49383b595be50647f0c764a48c78b5f3c4f8 ]

As the call trace shows, skb_panic was caused by wrong skb->mac_header
in nsh_gso_segment():

invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 3 PID: 2737 Comm: syz Not tainted 6.3.0-next-20230505 #1
RIP: 0010:skb_panic+0xda/0xe0
call Trace:
 skb_push+0x91/0xa0
 nsh_gso_segment+0x4f3/0x570
 skb_mac_gso_segment+0x19e/0x270
 __skb_gso_segment+0x1e8/0x3c0
 validate_xmit_skb+0x452/0x890
 validate_xmit_skb_list+0x99/0xd0
 sch_direct_xmit+0x294/0x7c0
 __dev_queue_xmit+0x16f0/0x1d70
 packet_xmit+0x185/0x210
 packet_snd+0xc15/0x1170
 packet_sendmsg+0x7b/0xa0
 sock_sendmsg+0x14f/0x160

The root cause is:
nsh_gso_segment() use skb->network_header - nhoff to reset mac_header
in skb_gso_error_unwind() if inner-layer protocol gso fails.
However, skb->network_header may be reset by inner-layer protocol
gso function e.g. mpls_gso_segment. skb->mac_header reset by the
inaccurate network_header will be larger than skb headroom.

nsh_gso_segment
    nhoff = skb->network_header - skb->mac_header;
    __skb_pull(skb,nsh_len)
    skb_mac_gso_segment
        mpls_gso_segment
            skb_reset_network_header(skb);//skb->network_header+=nsh_len
            return -EINVAL;
    skb_gso_error_unwind
        skb_push(skb, nsh_len);
        skb->mac_header = skb->network_header - nhoff;
        // skb->mac_header > skb->headroom, cause skb_push panic

Use correct mac_offset to restore mac_header and get rid of nhoff.

Fixes: c411ed854584 ("nsh: add GSO support")
Reported-by: syzbot+632b5d9964208bfef8c0@syzkaller.appspotmail.com
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/exynos: fix g2d_open/close helper function definitions

[ Upstream commit 2ef0785b30bd6549ddbc124979f1b6596e065ae2 ]

The empty stub functions are defined as global functions, which
causes a warning because of missing prototypes:

drivers/gpu/drm/exynos/exynos_drm_g2d.h:37:5: error: no previous prototype for 'g2d_open'
drivers/gpu/drm/exynos/exynos_drm_g2d.h:42:5: error: no previous prototype for 'g2d_close'

Mark them as 'static inline' to avoid the warning and to make
them behave as intended.

Fixes: eb4d9796fa34 ("drm/exynos: g2d: Convert to driver component API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: topology: Fix logic for copying tuples

[ Upstream commit 41c5305cc3d827d2ea686533777a285176ae01a0 ]

Topology could have more instances of the tokens being searched for than
the number of sets that need to be copied. Stop copying token after the
limit of number of token instances has been reached. This worked before
only by chance as we had allocated more size for the tuples array than
the number of actual tokens being parsed.

Fixes: 7006d20e5e9d ("ASoC: SOF: Introduce IPC3 ops")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512114630.24439-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mediatek: mt8186: Fix use-after-free in driver remove path

[ Upstream commit a93d2afd3f77a7331271a0f25c6a11003db69b3c ]

When devm runs function in the "remove" path for a device it runs them
in the reverse order. That means that if you have parts of your driver
that aren't using devm or are using "roll your own" devm w/
devm_add_action_or_reset() you need to keep that in mind.

The mt8186 audio driver didn't quite get this right. Specifically, in
mt8186_init_clock() it called mt8186_audsys_clk_register() and then
went on to call a bunch of other devm function. The caller of
mt8186_init_clock() used devm_add_action_or_reset() to call
mt8186_deinit_clock() but, because of the intervening devm functions,
the order was wrong.

Specifically at probe time, the order was:
1. mt8186_audsys_clk_register()
2. afe_priv->clk = devm_kcalloc(...)
3. afe_priv->clk[i] = devm_clk_get(...)

At remove time, the order (which should have been 3, 2, 1) was:
1. mt8186_audsys_clk_unregister()
3. Free all of afe_priv->clk[i]
2. Free afe_priv->clk

The above seemed to be causing a use-after-free. Luckily, it's easy to
fix this by simply using devm more correctly. Let's move the
devm_add_action_or_reset() to the right place. In addition to fixing
the use-after-free, code inspection shows that this fixes a leak
(missing call to mt8186_audsys_clk_unregister()) that would have
happened if any of the syscon_regmap_lookup_by_phandle() calls in
mt8186_init_clock() had failed.

Fixes: 55b423d5623c ("ASoC: mediatek: mt8186: support audio clock control in platform driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org
Link: https://lore.kernel.org/r/20230511092437.1.I31cceffc8c45bb1af16eb613e197b3df92cdc19e@changeid
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Fix trace_svc_register() call site

[ Upstream commit 07a27305938559fb35f7a46fb90a5e37728bdee6 ]

The trace event recorded incorrect values for the registered family,
protocol, and port because the arguments are in the wrong order.

Fixes: b4af59328c25 ("SUNRPC: Trace server-side rpcbind registration events")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: always free ctxt when freeing deferred request

[ Upstream commit 948f072ada23e0a504c5e4d7d71d4c83bd0785ec ]

Since the ->xprt_ctxt pointer was added to svc_deferred_req, it has not
been sufficient to use kfree() to free a deferred request.  We may need
to free the ctxt as well.

As freeing the ctxt is all that ->xpo_release_rqst() does, we repurpose
it to explicit do that even when the ctxt is not stored in an rqst.
So we now have ->xpo_release_ctxt() which is given an xprt and a ctxt,
which may have been taken either from an rqst or from a dreq.  The
caller is now responsible for clearing that pointer after the call to
->xpo_release_ctxt.

We also clear dr->xprt_ctxt when the ctxt is moved into a new rqst when
revisiting a deferred request.  This ensures there is only one pointer
to the ctxt, so the risk of double freeing in future is reduced.  The
new code in svc_xprt_release which releases both the ctxt and any
rq_deferred depends on this.

Fixes: 773f91b2cf3f ("SUNRPC: Fix NFSD's request deferral on RDMA transports")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: double free xprt_ctxt while still in use

[ Upstream commit eb8d3a2c809abd73ab0a060fe971d6b9019aa3c1 ]

When an RPC request is deferred, the rq_xprt_ctxt pointer is moved out
of the svc_rqst into the svc_deferred_req.
When the deferred request is revisited, the pointer is copied into
the new svc_rqst - and also remains in the svc_deferred_req.

In the (rare?) case that the request is deferred a second time, the old
svc_deferred_req is reused - it still has all the correct content.
However in that case the rq_xprt_ctxt pointer is NOT cleared so that
when xpo_release_xprt is called, the ctxt is freed (UDP) or possible
added to a free list (RDMA).
When the deferred request is revisited for a second time, it will
reference this ctxt which may be invalid, and the free the object a
second time which is likely to oops.

So change svc_defer() to *always* clear rq_xprt_ctxt, and assert that
the value is now stored in the svc_deferred_req.

Fixes: 773f91b2cf3f ("SUNRPC: Fix NFSD's request deferral on RDMA transports")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: netup_unidvb: fix use-after-free at del_timer()

[ Upstream commit 0f5bb36bf9b39a2a96e730bf4455095b50713f63 ]

When Universal DVB card is detaching, netup_unidvb_dma_fini()
uses del_timer() to stop dma->timeout timer. But when timer
handler netup_unidvb_dma_timeout() is running, del_timer()
could not stop it. As a result, the use-after-free bug could
happen. The process is shown below:

    (cleanup routine)          |        (timer routine)
                               | mod_timer(&dev->tx_sim_timer, ..)
netup_unidvb_finidev()         | (wait a time)
  netup_unidvb_dma_fini()      | netup_unidvb_dma_timeout()
    del_timer(&dma->timeout);  |
                               |   ndev->pci_dev->dev //USE

Fix by changing del_timer() to del_timer_sync().

Link: https://lore.kernel.org/linux-media/20230308125514.4208-1-duoming@zju.edu.cn
Fixes: 52b1eaf4c59a ("[media] netup_unidvb: NetUP Universal DVB-S/S2/T/T2/C PCI-E card driver")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix reset timeout when enable full VF

[ Upstream commit 6b45d5ff8c2c61baddd67d7510075ae121c5e704 ]

The timeout of the cmdq reset command has been increased to
resolve the reset timeout issue in the full VF scenario.
The timeout of other cmdq commands remains unchanged.

Fixes: 8d307f8e8cf1 ("net: hns3: create new set of unified hclge_comm_cmd_send APIs")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix reset delay time to avoid configuration timeout

[ Upstream commit 814d0c786068e858d889ada3153bff82f64223ad ]

Currently the hns3 vf function reset delays 5000ms before vf rebuild
process. In product applications, this delay is too long for application
configurations and causes configuration timeout.

According to the tests, 500ms delay is enough for reset process except PF
FLR. So this patch modifies delay to 500ms in these scenarios.

Fixes: 6988eb2a9b77 ("net: hns3: Add support to reset the enet/ring mgmt layer")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix sending pfc frames after reset issue

[ Upstream commit f14db07064727dd3bc0906c77a6d2759c1bbb395 ]

To prevent the system from abnormally sending PFC frames after an
abnormal reset. The hns3 driver notifies the firmware to disable pfc
before reset.

Fixes: 35d93a30040c ("net: hns3: adjust the process of PF reset")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix output information incomplete for dumping tx queue info with debugfs

[ Upstream commit 89f6bfb071182f05d7188c255b0e7251c3806f16 ]

In function hns3_dump_tx_queue_info, The print buffer is not enough when
the tx BD number is configured to 32760. As a result several BD
information wouldn't be displayed.

So fix it by increasing the tx queue print buffer length.

Fixes: 630a6738da82 ("net: hns3: adjust string spaces of some parameters of tx bd info in debugfs")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: rzn1-a5psw: disable learning for standalone ports

[ Upstream commit ec52b69c046a6219011af780aca155a96719637b ]

When ports are in standalone mode, they should have learning disabled to
avoid adding new entries in the MAC lookup table which might be used by
other bridge ports to forward packets. While adding that, also make sure
learning is enabled for CPU port.

Fixes: 888cdb892b61 ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: rzn1-a5psw: fix STP states handling

[ Upstream commit ebe9bc50952757b4b25eaf514da7c464196c9606 ]

stp_set_state() should actually allow receiving BPDU while in LEARNING
mode which is not the case. Additionally, the BLOCKEN bit does not
actually forbid sending forwarded frames from that port. To fix this, add
a5psw_port_tx_enable() function which allows to disable TX. However, while
its name suggest that TX is totally disabled, it is not and can still
allow to send BPDUs even if disabled. This can be done by using forced
forwarding with the switch tagging mechanism but keeping "filtering"
disabled (which is already the case in the rzn1-a5sw tag driver). With
these fixes, STP support is now functional.

Fixes: 888cdb892b61 ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: rzn1-a5psw: enable management frames for CPU port

[ Upstream commit 9e4b45f20c5aac786c728619e5ee746bffce1798 ]

Currently, management frame were discarded before reaching the CPU port due
to a misconfiguration of the MGMT_CONFIG register. Enable them by setting
the correct value in this register in order to correctly receive management
frame and handle STP.

Fixes: 888cdb892b61 ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

erspan: get the proto with the md version for collect_md

[ Upstream commit d80fc101d2eb9b3188c228d61223890aeea480a4 ]

In commit 20704bd1633d ("erspan: build the header with the right proto
according to erspan_ver"), it gets the proto with t->parms.erspan_ver,
but t->parms.erspan_ver is not used by collect_md branch, and instead
it should get the proto with md->version for collect_md.

Thanks to Kevin for pointing this out.

Fixes: 20704bd1633d ("erspan: build the header with the right proto according to erspan_ver")
Fixes: 94d7d8f29287 ("ip6_gre: add erspan v2 support")
Reported-by: Kevin Traynor <ktraynor@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250_bcm7271: fix leak in `brcmuart_probe`

[ Upstream commit f264f2f6f4788dc031cef60a0cf2881902736709 ]

Smatch reports:
drivers/tty/serial/8250/8250_bcm7271.c:1120 brcmuart_probe() warn:
'baud_mux_clk' from clk_prepare_enable() not released on lines: 1032.

The issue is fixed by using a managed clock.

Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Reported-by: XuDong Liu <m202071377@hust.edu.cn>
Link: https://lore.kernel.org/lkml/20230424125100.4783-1-m202071377@hust.edu.cn/
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230427181916.2983697-3-opendmb@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250_bcm7271: balance clk_enable calls

[ Upstream commit 8a3b5477256a54ae4a470dcebbcf8cdc18e4696d ]

The sw_baud clock must be disabled when the device driver is not
connected to the device. This now occurs when probe fails and
upon remove.

Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Reported-by: XuDong Liu <m202071377@hust.edu.cn>
Link: https://lore.kernel.org/lkml/20230424125100.4783-1-m202071377@hust.edu.cn/
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230427181916.2983697-2-opendmb@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: arc_uart: fix of_iomap leak in `arc_serial_probe`

[ Upstream commit 8ab5fc55d7f65d58a3c3aeadf11bdf60267cd2bd ]

Smatch reports:

drivers/tty/serial/arc_uart.c:631 arc_serial_probe() warn:
'port->membase' from of_iomap() not released on lines: 631.

In arc_serial_probe(), if uart_add_one_port() fails,
port->membase is not released, which would cause a resource leak.

To fix this, I replace of_iomap with devm_platform_ioremap_resource.

Fixes: 8dbe1d5e09a7 ("serial/arc: inline the probe helper")
Signed-off-by: Ke Zhang <m202171830@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230428031636.44642-1-m202171830@hust.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: fix possible sk_priority leak in tcp_v4_send_reset()

[ Upstream commit 1e306ec49a1f206fd2cc89a42fac6e6f592a8cc1 ]

When tcp_v4_send_reset() is called with @sk == NULL,
we do not change ctl_sk->sk_priority, which could have been
set from a prior invocation.

Change tcp_v4_send_reset() to set sk_priority and sk_mark
fields before calling ip_send_unicast_reply().

This means tcp_v4_send_reset() and tcp_v4_send_ack()
no longer have to clear ctl_sk->sk_mark after
their call to ip_send_unicast_reply().

Fixes: f6c0f5d209fa ("tcp: honor SO_PRIORITY in TIME_WAIT state")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vsock: avoid to close connected socket after the timeout

[ Upstream commit 6d4486efe9c69626cab423456169e250a5cd3af5 ]

When client and server establish a connection through vsock,
the client send a request to the server to initiate the connection,
then start a timer to wait for the server's response. When the server's
RESPONSE message arrives, the timer also times out and exits. The
server's RESPONSE message is processed first, and the connection is
established. However, the client's timer also times out, the original
processing logic of the client is to directly set the state of this vsock
to CLOSE and return ETIMEDOUT. It will not notify the server when the port
is released, causing the server port remain.
when client's vsock_connect timeout，it should check sk state is
ESTABLISHED or not. if sk state is ESTABLISHED, it means the connection
is established, the client should not set the sk state to CLOSE

Note: I encountered this issue on kernel-4.18, which can be fixed by
this patch. Then I checked the latest code in the community
and found similar issue.

Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Zhuang Shengen <zhuangshengen@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: disable RXFCS and RXALL features by default

[ Upstream commit 134120b066044399ef59564ff3ba66ab344cfc5b ]

By default we would not want RXFCS and RXALL features enabled as they are
mainly intended for debugging purposes. This does not stop users from
enabling them later on as needed.

Fixes: 8e57daf70671 ("sfc_ef100: RX path for EF100")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek: Apply HP B&O top speaker profile to Pavilion 15

[ Upstream commit 92553ee03166ef8fa978e7683f9f4af30c9c4e6b ]

The Pavilion 15 line has B&O top speakers similar to the x360 and
applying the same profile produces good sound.  Without this, the
sound would be tinny and underpowered without either applying
model=alc295-hp-x360 or booting another OS first.

Signed-off-by: Ryan Underwood <nemesis@icequake.net>
Fixes: 563785edfcef ("ALSA: hda/realtek - Add quirk entry for HP Pavilion 15")
Link: https://lore.kernel.org/r/ZF0mpcMz3ezP9KQw@icequake.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: connac: fix stats->tx_bytes calculation

[ Upstream commit c7ab7a29ef5c0779574120d922256ce4651555d3 ]

The stats->tx_bytes shall subtract retry byte from tx byte.

Fixes: 43eaa3689507 ("wifi: mt76: add PPDU based TxS support for WED device")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/b3cd45596943cf5a06b2e08e2fe732ab0b51311b.1682285873.git.ryder.lee@mediatek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: firewire-digi00x: prevent potential use after free

[ Upstream commit c0e72058d5e21982e61a29de6b098f7c1f0db498 ]

This code was supposed to return an error code if init_stream()
failed, but it instead freed dg00x->rx_stream and returned success.
This potentially leads to a use after free.

Fixes: 9a08067ec318 ("ALSA: firewire-digi00x: support AMDTP domain")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/c224cbd5-d9e2-4cd4-9bcf-2138eb1d35c6@kili.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: dp83867: add w/a for packet errors seen with short cables

[ Upstream commit 0b01db274028f5acd207332686ffc92ac77491ac ]

Introduce the W/A for packet errors seen with short cables (<1m) between
two DP83867 PHYs.

The W/A recommended by DM requires FFE Equalizer Configuration tuning by
writing value 0x0E81 to DSP_FFE_CFG register (0x012C), surrounded by hard
and soft resets as follows:

write_reg(0x001F, 0x8000); //hard reset
write_reg(DSP_FFE_CFG, 0x0E81);
write_reg(0x001F, 0x4000); //soft reset

Since  DP83867 PHY DM says "Changing this register to 0x0E81, will not
affect Long Cable performance.", enable the W/A by default.

Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fec: Better handle pm_runtime_get() failing in .remove()

[ Upstream commit f816b9829b19394d318e01953aa3b2721bca040d ]

In the (unlikely) event that pm_runtime_get() (disguised as
pm_runtime_resume_and_get()) fails, the remove callback returned an
error early. The problem with this is that the driver core ignores the
error value and continues removing the device. This results in a
resource leak. Worse the devm allocated resources are freed and so if a
callback of the driver is called later the register mapping is already
gone which probably results in a crash.

Fixes: a31eda65ba21 ("net: fec: fix clock count mis-match")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230510200020.1534610-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftets: seg6: disable rp_filter by default in srv6_end_dt4_l3vpn_test

[ Upstream commit f97b8401e0deb46ad1e4245c21f651f64f55aaa6 ]

On some distributions, the rp_filter is automatically set (=1) by
default on a netdev basis (also on VRFs).
In an SRv6 End.DT4 behavior, decapsulated IPv4 packets are routed using
the table associated with the VRF bound to that tunnel. During lookup
operations, the rp_filter can lead to packet loss when activated on the
VRF.
Therefore, we chose to make this selftest more robust by explicitly
disabling the rp_filter during tests (as it is automatically set by some
Linux distributions).

Fixes: 2195444e09b4 ("selftests: add selftest for the SRv6 End.DT4 behavior")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: seg6: disable DAD on IPv6 router cfg for srv6_end_dt4_l3vpn_test

[ Upstream commit 21a933c79a33add3612808f3be4ad65dd4dc026b ]

The srv6_end_dt4_l3vpn_test instantiates a virtual network consisting of
several routers (rt-1, rt-2) and hosts.
When the IPv6 addresses of rt-{1,2} routers are configured, the Deduplicate
Address Detection (DAD) kicks in when enabled in the Linux distros running
the selftests. DAD is used to check whether an IPv6 address is already
assigned in a network. Such a mechanism consists of sending an ICMPv6 Echo
Request and waiting for a reply.
As the DAD process could take too long to complete, it may cause the
failing of some tests carried out by the srv6_end_dt4_l3vpn_test script.

To make the srv6_end_dt4_l3vpn_test more robust, we disable DAD on routers
since we configure the virtual network manually and do not need any address
deduplication mechanism at all.

Fixes: 2195444e09b4 ("selftests: add selftest for the SRv6 End.DT4 behavior")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Fix submit error-path leaks

[ Upstream commit 68dc6c2d5eec45515855cce99256162f45651a0b ]

For errors after msm_submitqueue_get(), we need to drop the submitqueue
reference.  Additionally after get_unused_fd() we need to drop the fd.
The ordering for dropping the queue lock and put_unused_fd() is not
important, so just move this all into out_post_unlock.

v2: Only drop queue ref if submit doesn't take it
v3: Fix unitialized submit ref in error path
v4: IS_ERR_OR_NULL()

Reported-by: pinkperfect2021@gmail.com
Fixes: f0de40a131d9 drm/msm: ("Reorder lock vs submit alloc")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/536073/
Link: https://lore.kernel.org/r/20230509203041.440619-1-robdclark@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

af_key: Reject optional tunnel/BEET mode templates in outbound policies

[ Upstream commit cf3128a7aca55b2eefb68281d44749c683bdc96f ]

xfrm_state_find() uses `encap_family` of the current template with
the passed local and remote addresses to find a matching state.
If an optional tunnel or BEET mode template is skipped in a mixed-family
scenario, there could be a mismatch causing an out-of-bounds read as
the addresses were not replaced to match the family of the next template.

While there are theoretical use cases for optional templates in outbound
policies, the only practical one is to skip IPComp states in inbound
policies if uncompressed packets are received that are handled by an
implicitly created IPIP state instead.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: Reject optional tunnel/BEET mode templates in outbound policies

[ Upstream commit 3d776e31c841ba2f69895d2255a49320bec7cea6 ]

xfrm_state_find() uses `encap_family` of the current template with
the passed local and remote addresses to find a matching state.
If an optional tunnel or BEET mode template is skipped in a mixed-family
scenario, there could be a mismatch causing an out-of-bounds read as
the addresses were not replaced to match the family of the next template.

While there are theoretical use cases for optional templates in outbound
policies, the only practical one is to skip IPComp states in inbound
policies if uncompressed packets are received that are handled by an
implicitly created IPIP state instead.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpupower: Make TSC read per CPU for Mperf monitor

[ Upstream commit c2adb1877b76fc81ae041e1db1a6ed2078c6746b ]

System-wide TSC read could cause a drift in C0 percentage calculation.
Because if first TSC is read and then one by one mperf is read for all
cpus, this introduces drift between mperf reading of later CPUs and TSC
reading.  To lower this drift read TSC per CPU and also just after mperf
read.  This technique improves C0 percentage calculation in Mperf monitor.

Before fix: (System 100% busy)

              | Mperf              || RAPL        || Idle_Stats
 PKG|CORE| CPU| C0   | Cx   | Freq  || pack | core  || POLL | C1   | C2
   0|   0|   0| 87.15| 12.85|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   0| 256| 84.62| 15.38|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   1|   1| 87.15| 12.85|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   1| 257| 84.08| 15.92|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   2|   2| 86.61| 13.39|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   2| 258| 83.26| 16.74|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   3|   3| 86.61| 13.39|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   3| 259| 83.60| 16.40|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   4|   4| 86.33| 13.67|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   4| 260| 83.33| 16.67|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   5|   5| 86.06| 13.94|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   5| 261| 83.05| 16.95|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   6|   6| 85.51| 14.49|  2695||168659003|3970468||  0.00|  0.00| 0.00

After fix: (System 100% busy)

             | Mperf              || RAPL        || Idle_Stats
 PKG|CORE| CPU| C0   | Cx   | Freq  || pack | core  || POLL | C1   | C2
   0|   0|   0| 98.03|  1.97|  2415||163295480|3811189||  0.00|  0.00| 0.00
   0|   0| 256| 98.50|  1.50|  2394||163295480|3811189||  0.00|  0.00| 0.00
   0|   1|   1| 99.99|  0.01|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   1| 257| 99.99|  0.01|  2375||163295480|3811189||  0.00|  0.00| 0.00
   0|   2|   2| 99.99|  0.01|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   2| 258|100.00|  0.00|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   3|   3|100.00|  0.00|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   3| 259| 99.99|  0.01|  2435||163295480|3811189||  0.00|  0.00| 0.00
   0|   4|   4|100.00|  0.00|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   4| 260|100.00|  0.00|  2435||163295480|3811189||  0.00|  0.00| 0.00
   0|   5|   5| 99.99|  0.01|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   5| 261|100.00|  0.00|  2435||163295480|3811189||  0.00|  0.00| 0.00
   0|   6|   6|100.00|  0.00|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   6| 262|100.00|  0.00|  2435||163295480|3811189||  0.00|  0.00| 0.00

Cc: Thomas Renninger <trenn@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Fixes: 7fe2f6399a84 ("cpupowerutils - cpufrequtils extended with quite some features")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_micfil: Fix error handler with pm_runtime_enable

[ Upstream commit 17955aba7877a4494d8093ae5498e19469b01d57 ]

There is error message when defer probe happens:

fsl-micfil-dai 30ca0000.micfil: Unbalanced pm_runtime_enable!

Fix the error handler with pm_runtime_enable and add
fsl_micfil_remove() for pm_runtime_disable.

Fixes: 47a70e6fc9a8 ("ASoC: Add MICFIL SoC Digital Audio Interface driver.")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com
Link: https://lore.kernel.org/r/1683540996-6136-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform: Provide a remove callback that returns no value

[ Upstream commit 5c5a7680e67ba6fbbb5f4d79fa41485450c1985c ]

struct platform_driver::remove returning an integer made driver authors
expect that returning an error code was proper error handling. However
the driver core ignores the error and continues to remove the device
because there is nothing the core could do anyhow and reentering the
remove callback again is only calling for trouble.

So this is an source for errors typically yielding resource leaks in the
error path.

As there are too many platform drivers to neatly convert them all to
return void in a single go, do it in several steps after this patch:

 a) Convert all drivers to implement .remove_new() returning void instead
    of .remove() returning int;
 b) Change struct platform_driver::remove() to return void and so make
    it identical to .remove_new();
 c) Change all drivers back to .remove() now with the better prototype;
 d) drop struct platform_driver::remove_new().

While this touches all drivers eventually twice, steps a) and c) can be
done one driver after another and so reduces coordination efforts
immensely and simplifies review.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221209150914.3557650-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 17955aba7877 ("ASoC: fsl_micfil: Fix error handler with pm_runtime_enable")
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: display/msm: dsi-controller-main: Document qcom, master-dsi and qcom, sync-dual-dsi

[ Upstream commit ca29699a57ecee6084a4056f5bfd6f11dd359a71 ]

This fixes warning:
  sm8250-xiaomi-elish-csot.dtb: dsi@ae94000: Unevaluated properties are not allowed ('qcom,master-dsi', 'qcom,sync-dual-dsi' were unexpected)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Fixes: 4dbe55c97741 ("dt-bindings: msm: dsi: add yaml schemas for DSI bindings")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/534306/
Link: https://lore.kernel.org/r/20230427122132.24840-1-lujianhua000@gmail.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: Remove duplicate register defines from INTF

[ Upstream commit 202c044203ac5860e3025169105368d99f9bc6a2 ]

The INTF_FRAME_LINE_COUNT_EN, INTF_FRAME_COUNT and INTF_LINE_COUNT
registers are already defined higher up, in the right place when sorted
numerically.

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/534231/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-8-27ce1a5ab5c6@somainline.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: Move non-MDP_TOP INTF_INTR offsets out of hwio header

[ Upstream commit e9d9ce5462fecdeefec87953de71df4d025cbc72 ]

These offsets do not fall under the MDP TOP block and do not fit the
comment right above.  Move them to dpu_hw_interrupts.c next to the
repsective MDP_INTF_x_OFF interrupt block offsets.

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/534203/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-3-27ce1a5ab5c6@somainline.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: Assign missing writeback log_mask

[ Upstream commit a432fc31f03db2546a48bcf5dd69ca28ceb732bf ]

The WB debug log mask ended up never being assigned, leading to writes
to this block to never be logged even if the mask is enabled in
dpu_hw_util_log_mask via debugfs.

Fixes: 84a33d0fd921 ("drm/msm/dpu: add dpu_hw_wb abstraction for writeback blocks")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/533860/
Link: https://lore.kernel.org/r/20230418-dpu-drop-useless-for-lookup-v3-1-e8d869eea455@somainline.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: unregister audio driver during unbind

[ Upstream commit 85c636284cb63b7740b4ae98881ace92158068d3 ]

while binding the code always registers a audio driver, however there
is no corresponding unregistration done in unbind. This leads to multiple
redundant audio platform devices if dp_display_bind and dp_display_unbind
happens multiple times during startup. On X13s platform this resulted in
6 to 9 audio codec device instead of just 3 codec devices for 3 dp ports.

Fix this by unregistering codecs on unbind.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/533324/
Link: https://lore.kernel.org/r/20230421145657.12186-1-srinivas.kandagatla@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "Fix XFRM-I support for nested ESP tunnels"

[ Upstream commit 5fc46f94219d1d103ffb5f0832be9da674d85a73 ]

This reverts commit b0355dbbf13c0052931dd14c38c789efed64d3de.

The reverted commit clears the secpath on packets received via xfrm interfaces
to support nested IPsec tunnels. This breaks Netfilter policy matching using
xt_policy in the FORWARD chain, as the secpath is missing during forwarding.
Additionally, Benedict Wong reports that it breaks Transport-in-Tunnel mode.

Fix this regression by reverting the commit until we have a better approach
for nested IPsec tunnels.

Fixes: b0355dbbf13c ("Fix XFRM-I support for nested ESP tunnels")
Link: https://lore.kernel.org/netdev/20230412085615.124791-1-martin@strongswan.org/
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: don't check the default policy if the policy allows the packet

[ Upstream commit 430cac487400494c19a8b85299e979bb07b4671f ]

The current code doesn't let a simple "allow" policy counteract a
default policy blocking all incoming packets:

    ip x p setdefault in block
    ip x p a src 192.168.2.1/32 dst 192.168.2.2/32 dir in action allow

At this stage, we have an allow policy (with or without transforms)
for this packet. It doesn't matter what the default policy says, since
the policy we looked up lets the packet through. The case of a
blocking policy is already handled separately, so we can remove this
check.

Fixes: 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: drop gfx_v11_0_cp_ecc_error_irq_funcs

[ Upstream commit 720b47229a5b24061d1c2e29ddb6043a59178d79 ]

The gfx.cp_ecc_error_irq is retired in gfx11. In gfx_v11_0_hw_fini still
use amdgpu_irq_put to disable this interrupt, which caused the call trace
in this function.

[  102.873958] Call Trace:
[  102.873959]  <TASK>
[  102.873961]  gfx_v11_0_hw_fini+0x23/0x1e0 [amdgpu]
[  102.874019]  gfx_v11_0_suspend+0xe/0x20 [amdgpu]
[  102.874072]  amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu]
[  102.874122]  amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[  102.874172]  amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu]
[  102.874223]  amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu]
[  102.874321]  amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[  102.874375]  process_one_work+0x21f/0x3f0
[  102.874377]  worker_thread+0x200/0x3e0
[  102.874378]  ? process_one_work+0x3f0/0x3f0
[  102.874379]  kthread+0xfd/0x130
[  102.874380]  ? kthread_complete_and_exit+0x20/0x20
[  102.874381]  ret_from_fork+0x22/0x30

v2:
- Handle umc and gfx ras cases in separated patch
- Retired the gfx_v11_0_cp_ecc_error_irq_funcs in gfx11

v3:
- Improve the subject and code comments
- Add judgment on gfx11 in the function of amdgpu_gfx_ras_late_init

v4:
- Drop the define of CP_ME1_PIPE_INST_ADDR_INTERVAL and
SET_ECC_ME_PIPE_STATE which using in gfx_v11_0_set_cp_ecc_error_state
- Check cp_ecc_error_irq.funcs rather than ip version for a more
sustainable life

v5:
- Simplify judgment conditions

Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: hp-wmi: add micmute to hp_wmi_keymap struct

[ Upstream commit decab2825c3ef9b154c6f76bce40872ffb41c36f ]

Fixes micmute key of HP Envy X360 ey0xxx.

Signed-off-by: Fae <faenkhauser@gmail.com>
Link: https://lore.kernel.org/r/20230425063644.11828-1-faenkhauser@gmail.com
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: Move existing HP drivers to a new hp subdir

[ Upstream commit 6e9b8992b122cb12688bd259fc99e67d1be234eb ]

The purpose of this patch is to provide a central location where all
HP related drivers are found. HP drivers will recide under
drivers/platform/x86/hp directory.

Introduce changes to Kconfig file to list all HP driver under "HP X86
Platform Specific Device Drivers" menu option. Additional changes
include update MAINTAINERS file to indicate hp related drivers new
path.

Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20221020201033.12790-2-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stable-dep-of: decab2825c3e ("platform/x86: hp-wmi: add micmute to hp_wmi_keymap struct")
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: Replace regular spinlock with spin_trylock on panic path

[ Upstream commit 829632dae8321787525ee37dc4828bbe6edafdae ]

The panic notifiers' callbacks execute in an atomic context, with
interrupts/preemption disabled, and all CPUs not running the panic
function are off, so it's very dangerous to wait on a regular
spinlock, there's a risk of deadlock.

Refactor the panic notifier of parisc/power driver to make use
of spin_trylock - for that, we've added a second version of the
soft-power function. Also, some comments were reorganized and
trailing white spaces, useless header inclusion and blank lines
were removed.

Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jeroen Roovers <jer@xs4all.nl>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs

[ Upstream commit 72d4a1683741ee578da0e265886e6a7f3d42266c ]

Add Intel Meteor Lake PCH-S also called as Meteor Point-S LPSS PCI IDs.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230330132618.4108665-1-jarkko.nikula@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: dln2: Fix memory leak in dln2_probe()

[ Upstream commit 96da8f148396329ba769246cb8ceaa35f1ddfc48 ]

When dln2_setup_rx_urbs() in dln2_probe() fails, error out_free forgets
to call usb_put_dev() to decrease the refcount of dln2->usb_dev.

Fix this by adding usb_put_dev() in the error handling code of
dln2_probe().

Signed-off-by: Qiang Ning <qning0106@126.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230330024353.4503-1-qning0106@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: intel_soc_pmic_chtwc: Add Lenovo Yoga Book X90F to intel_cht_wc_models

[ Upstream commit ded99b89d25fd73a1d7bd910378e0339fd9d4c4a ]

The Android Lenovo Yoga Book X90F / X90L uses the same charger / fuelgauge
setup as the already supported Windows Lenovo Yoga Book X91F/L, add
a DMI match for this to intel_cht_wc_models with driver_data
set to INTEL_CHT_WC_LENOVO_YOGABOOK1.

When the quirk for the X91F/L was initially added it was written to
also apply to the X90F/L but this does not work because the Android
version of the Yoga Book uses completely different DMI strings.
Also adjust the X91F/L quirk to reflect that it only applies to
the X91F/L models.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230301095402.28582-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

soundwire: bus: Fix unbalanced pm_runtime_put() causing usage count underflow

[ Upstream commit e9537962519e88969f5f69cd0571eb4f6984403c ]

This reverts commit
443a98e649b4 ("soundwire: bus: use pm_runtime_resume_and_get()")

Change calls to pm_runtime_resume_and_get() back to pm_runtime_get_sync().
This fixes a usage count underrun caused by doing a pm_runtime_put() even
though pm_runtime_resume_and_get() returned an error.

The three affected functions ignore -EACCES error from trying to get
pm_runtime, and carry on, including a put at the end of the function.
But pm_runtime_resume_and_get() does not increment the usage count if it
returns an error. So in the -EACCES case you must not call
pm_runtime_put().

The documentation for pm_runtime_get_sync() says:
 "Consider using pm_runtime_resume_and_get() ...  as this is likely to
 result in cleaner code."

In this case I don't think it results in cleaner code because the
pm_runtime_put() at the end of the function would have to be conditional on
the return value from pm_runtime_resume_and_get() at the top of the
function.

pm_runtime_get_sync() doesn't have this problem because it always
increments the count, so always needs a put. The code can just flow through
and do the pm_runtime_put() unconditionally.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230406134640.8582-1-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soundwire: qcom: gracefully handle too many ports in DT

[ Upstream commit 2367e0ecb498764e95cfda691ff0828f7d25f9a4 ]

There are two issues related to the number of ports coming from
Devicetree when exceeding in total QCOM_SDW_MAX_PORTS.  Both lead to
incorrect memory accesses:
1. With DTS having too big value of input or output ports, the driver,
   when copying port parameters from local/stack arrays into 'pconfig'
   array in 'struct qcom_swrm_ctrl', will iterate over their sizes.

2. If DTS also has too many parameters for these ports (e.g.
   qcom,ports-sinterval-low), the driver will overflow buffers on the
   stack when reading these properties from DTS.

Add a sanity check so incorrect DTS will not cause kernel memory
corruption.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230222144412.237832-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: st: miphy28lp: use _poll_timeout functions for waits

[ Upstream commit e3be4dd2c8d8aabfd2c3127d0e2e5754d3ae82d6 ]

This commit introduces _poll_timeout functions usage instead of
wait loops waiting for a status bit.

Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20230210224309.98452-1-avolmat@me.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soundwire: dmi-quirks: add remapping for Intel 'Rooks County' NUC M15

[ Upstream commit 01b33e284ca28cc977bdcfb23be2c719f2139175 ]

Same DSDT problem as the HP Omen 16-k0005TX, except rt1316 amp is on
link2.

Link: https://github.com/thesofproject/linux/issues/4088
Signed-off-by: Eugene Huang <eugene.huang99@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314090618.498716-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

recordmcount: Fix memory leaks in the uwrite function

[ Upstream commit fa359d068574d29e7d2f0fdd0ebe4c6a12b5cfb9 ]

Common realloc mistake: 'file_append' nulled but not freed upon failure

Link: https://lkml.kernel.org/r/20230426010527.703093-1-zenghao@kylinos.cn
Signed-off-by: Hao Zeng <zenghao@kylinos.cn>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>