drm/ast: fix memory leak when unload the driver

a connector is leaked upon module unload, it seems that we should do
similar to sample driver as suggested in drm_drv.c.

Adding drm_atomic_helper_shutdown() in ast_pci_remove to prevent leaking.

[  153.822134] WARNING: CPU: 0 PID: 173 at drivers/gpu/drm/drm_mode_config.c:504 drm_mode_config_cle0
[  153.822698] Modules linked in: ast(-) drm_vram_helper drm_ttm_helper ttm [last unloaded: ttm]
[  153.823197] CPU: 0 PID: 173 Comm: modprobe Tainted: G        W         5.11.0-03615-g55f62bc873474
[  153.823708] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-4
[  153.824333] RIP: 0010:drm_mode_config_cleanup+0x418/0x470
[  153.824637] Code: 0c 00 00 00 00 48 8b 84 24 a8 00 00 00 65 48 33 04 25 28 00 00 00 75 65 48 81 c0
[  153.825668] RSP: 0018:ffff888103c9fb70 EFLAGS: 00010212
[  153.825962] RAX: ffff888102b0d100 RBX: ffff888102b0c298 RCX: ffffffff818d8b2b
[  153.826356] RDX: dffffc0000000000 RSI: 000000007fffffff RDI: ffff888102b0c298
[  153.826748] RBP: ffff888103c9fba0 R08: 0000000000000001 R09: ffffed1020561857
[  153.827146] R10: ffff888102b0c2b7 R11: ffffed1020561856 R12: ffff888102b0c000
[  153.827538] R13: ffff888102b0c2d8 R14: ffff888102b0c2d8 R15: 1ffff11020793f70
[  153.827935] FS:  00007f24bff456a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000
[  153.828380] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  153.828697] CR2: 0000000001c39018 CR3: 0000000103c90000 CR4: 00000000000006f0
[  153.829096] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  153.829486] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  153.829883] Call Trace:
[  153.830024]  ? drmm_mode_config_init+0x930/0x930
[  153.830281]  ? cpumask_next+0x16/0x20
[  153.830488]  ? mnt_get_count+0x66/0x80
[  153.830699]  ? drm_mode_config_cleanup+0x470/0x470
[  153.830972]  drm_managed_release+0xed/0x1c0
[  153.831208]  drm_dev_release+0x3a/0x50
[  153.831420]  release_nodes+0x39e/0x410
[  153.831631]  ? devres_release+0x40/0x40
[  153.831852]  device_release_driver_internal+0x158/0x270
[  153.832143]  driver_detach+0x76/0xe0
[  153.832344]  bus_remove_driver+0x7e/0x100
[  153.832568]  pci_unregister_driver+0x28/0xf0
[  153.832821]  __x64_sys_delete_module+0x268/0x300
[  153.833086]  ? __ia32_sys_delete_module+0x300/0x300
[  153.833357]  ? call_rcu+0x372/0x4f0
[  153.833553]  ? fpregs_assert_state_consistent+0x4d/0x60
[  153.833840]  ? exit_to_user_mode_prepare+0x2f/0x130
[  153.834118]  do_syscall_64+0x33/0x40
[  153.834317]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  153.834597] RIP: 0033:0x7f24bfec7cf7
[  153.834797] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 41
[  153.835812] RSP: 002b:00007fff72e6cb58 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0
[  153.836234] RAX: ffffffffffffffda RBX: 00007f24bff45690 RCX: 00007f24bfec7cf7
[  153.836623] RDX: 00000000ffffffff RSI: 0000000000000080 RDI: 0000000001c2fb10
[  153.837018] RBP: 0000000001c2fac0 R08: 2f2f2f2f2f2f2f2f R09: 0000000001c2fac0
[  153.837408] R10: fefefefefefefeff R11: 0000000000000202 R12: 0000000001c2fac0
[  153.837798] R13: 0000000001c2f9d0 R14: 0000000000000000 R15: 0000000000000001
[  153.838194] ---[ end trace b92031513bbe596c ]---
[  153.838441] [drm:drm_mode_config_cleanup] *ERROR* connector VGA-1 leaked!

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222023322.984885-1-ztong0001@gmail.com

efifb: Ensure graphics device for efifb stays at PCI D0

We are seeing root ports on some desktop boards support D3cold for
discrete graphics card. So when efifb is in use while graphics device
isn't bound to a driver, PCI and ACPI will put the graphics to D3cold
when runtime suspend kicks in, makes efifb stop working.

So ensure the graphics device won't be runtime suspended, to keep efifb
work all the time.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129084327.986630-1-kai.heng.feng@canonical.com

drm/drv: Remove initialization of static variables

Address the following checkpatch errors:
ERROR: do not initialise statics to false

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1613701811-32037-1-git-send-email-tiantao6@hisilicon.com

drm/qxl: add lock asserts to qxl_bo_vmap_locked + qxl_bo_vunmap_locked

Try avoid re-introducing locking bugs.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-12-kraxel@redhat.com

drm/qxl: rework cursor plane

Add helper functions to create and move the cursor.
Create the cursor_bo in prepare_fb callback, in the
atomic_commit callback we only send the update command
to the host.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-11-kraxel@redhat.com

drm/qxl: move shadow handling to new qxl_prepare_shadow()

Pure code motion, no functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-10-kraxel@redhat.com

drm/qxl: fix monitors object vmap

Use the correct vmap variant.  We don't hold a reservation here,
so we can't use the _locked variant.  We can drop the pin because
qxl_bo_vmap will do that for us.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-9-kraxel@redhat.com

drm/qxl: fix prime vmap

Use the correct vmap variant.  We don't have a reservation here,
so we can't use the _locked version.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-8-kraxel@redhat.com

drm/qxl: add qxl_bo_vmap/qxl_bo_vunmap

Add vmap/vunmap variants which reserve (and pin) the bo.
They can be used in case the caller doesn't hold a reservation
for the bo.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-7-kraxel@redhat.com

drm/qxl: rename qxl_bo_kmap -> qxl_bo_vmap_locked

Append _locked to Make clear that these functions should be called with
reserved bo's only.  While being at it also rename kmap -> vmap.

No functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-6-kraxel@redhat.com

drm/qxl: fix lockdep issue in qxl_alloc_release_reserved

Call qxl_bo_unpin (which does a reservation) without holding the
release_mutex lock.  Fixes lockdep (correctly) warning on a possible
deadlock.

Fixes: 65ffea3c6e73 ("drm/qxl: unpin release objects")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-5-kraxel@redhat.com

drm/qxl: use ttm bo priorities

Allow to set priorities for buffer objects.  Use priority 1 for surface
and cursor command releases.  Use priority 0 for drawing command
releases.  That way the short-living drawing commands are first in line
when it comes to eviction, making it *much* less likely that
ttm_bo_mem_force_space() picks something which can't be evicted and
throws an error after waiting a while without success.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-4-kraxel@redhat.com

drm/qxl: more fence wait rework

Move qxl_io_notify_oom() call into wait condition.
That way the driver will call it again if one call
wasn't enough.

Also allows to remove the extra dma_fence_is_signaled()
check and the goto.

Fixes: 5a838e5d5825 ("drm/qxl: simplify qxl_fence_wait")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-3-kraxel@redhat.com

drm/qxl: properly handle device init failures

Specifically do not try release resources which where
not allocated in the first place.

Cc: Tong Zhang <ztong0001@gmail.com>
Tested-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-2-kraxel@redhat.com

drm/tilcdc: fix raster control register setting

The fdd property of the tilcdc_panel_info structure must set the reqdly
bit field  (bit 12 to 19) of the raster control register. The previous
statement set the least significant bit instead.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216202225.12861-1-dariobin@libero.it

drm/tilcdc: replace spin_lock_irqsave by spin_lock in hard IRQ

The code has been in a irq-disabled context since it is hard IRQ. There
is no necessity to do it again.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/1612751576-42512-1-git-send-email-tiantao6@hisilicon.com

drm/dp_mst: Tune down the WARN modesetting a port with full_pbn=0

It's possible to modeset a connector/mst port that has a 0 full_pbn
value: if the sink on the port deasserts its HPD and a branch device
reports this via a CSN with the port's ddps=0 and pdt!=NONE the driver
clears full_pbn, but the corresponding connector can be still
modesetted.

This happened on a DELL U2719D monitor as the branch device and an LG
27UL650-W daisy-chained to it, the LG monitor generating a long HPD
pulse (doing this for some reason always when waking up from some power
saving state).

Tune down the WARN about this scenario to a debug message.

v2: Use the correct atomic debug message level. (Lyude)

References: https://gitlab.freedesktop.org/drm/intel/-/issues/1917
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216123448.410545-1-imre.deak@intel.com

video: fbdev: amba-clcd: Always use msleep() for waiting

The driver uses in_atomic() to distinguish between mdelay() and msleep().

The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.

I traced the usage of in_interrupt() back to its initial merge:
    bfe694f833643 ("[ARM] Add ARM AMBA CLCD framebuffer driver.")
    https://git.kernel.org/history/history/c/bfe694f833643

The driver has been removed and added back in the meantime.
I've been looking for the IRQ context as described in the comment and
couldn't find it. The functions calling clcdfb_sleep() also call
conditionally backlight_update_status() which acquires a mutex. If it is
okay to acquire a mutex then it is okay to use msleep() since both
functions must be used in preemptible context.

Replace clcdfb_sleep() with msleep().

Cc: Peter Collingbourne <pcc@google.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208223810.388502-4-bigeasy@linutronix.de

video: omapfb: Remove WARN_ON(in_interrupt()).

dsi_sync_vc() uses in_interrupt() to create a warning if the function is
used in non-preemptible context.

The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.

The wait_for_completion() function (used in dsi_sync_vc_vp() and
dsi_sync_vc_l4() has already a check if it is invoked from proper
context.

Remove WARN_ON(in_interrupt()) from the driver.

Cc: linux-omap@vger.kernel.org
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208223810.388502-3-bigeasy@linutronix.de

video: omap: Remove in_interrupt() usage.

alloc_req() uses in_interrupt() to detect if it is safe to use down().

The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.

The semaphore is used as a counting semaphore, initialized with the
number of slots in the request pool minus IRQ_REQ_POOL_SIZE - which are
reserved for the in_interrupt() user to ensure that a request is always
available. The preemptible user will block on the semphore waiting for a
request to become available in case there are no requests available.

Replace in_interrupt() with a `can_sleep' argument to indicate if it is
safe to block on the sempahore.

Cc: linux-omap@vger.kernel.org
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208223810.388502-2-bigeasy@linutronix.de

drm: Switch to %p4cc format modifier

Switch DRM drivers from drm_get_format_name() to %p4cc. This gets rid of a
large number of temporary variables at the same time.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-4-sakari.ailus@linux.intel.com

v4l: ioctl: Use %p4cc printk modifier to print FourCC codes

Now that we can print FourCC codes directly using printk, make use of the
feature in V4L2 core.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-3-sakari.ailus@linux.intel.com

lib/vsprintf: Add support for printing V4L2 and DRM fourccs

Add a printk modifier %p4cc (for pixel format) for printing V4L2 and DRM
pixel formats denoted by fourccs. The fourcc encoding is the same for both
so the same implementation can be used.

Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-2-sakari.ailus@linux.intel.com

drm/ast: Move all of the cursor-update functionality to atomic_update

We used to update the cursor image in prepare_fb. Move all this code to
atomic_update (where it belongs). The generic helper for shadow-buffered
planes now implement the cursor plane's prepare_fb.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-11-tzimmermann@suse.de

drm/ast: Store each HW cursor offset after pinning the rsp BO

As HW cursor BOs never move, we can store the offset in VRAM in the
cursor-plane's HWC state. This removes the last possible source of
runtime errors from atomic_update.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-10-tzimmermann@suse.de

drm/ast: Map HW cursor BOs permanently

The BOs of the hardware cursor are now mapped permanently while the
cursor plane is being used. This reduces the CPU overhead of the cursor
plane's atomic_update function.

The change also resolves a problem with the vmap call in the commit tail.
The vmap implementation could acquire the DMA reservation lock on the
BO, which is not allowed that late in the atomic update. Removing the
vmap call from atomic_update fixes the issue.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-9-tzimmermann@suse.de

drm/ast: Store cursor BOs in cursor plane

The cursor uses two BOs in video RAM to implement double buffering. Store
both in struct ast_cursor_plane.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-8-tzimmermann@suse.de

drm/ast: Add cursor-plane data structure

Cursor state is currently located throughout struct ast_private. Having
struct ast_cursor_plane as dedicated data structure for cursors helps to
organize the modesetting code.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-7-tzimmermann@suse.de

drm/ast: Inline ast cursor-update functions into modesetting code

The logic for cursor updates is now located in the cursor plane's
modesetting code. A number of helper functions remain to modify the
rsp registers and image.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-6-tzimmermann@suse.de

drm/ast: Allocate HW cursor BOs during cursor-plane initialization

The BOs are eventually released by the cursor plane's destroy callback.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-5-tzimmermann@suse.de

drm/ast: Initialize planes in helper functions

This change will help with inlining cursor functions into modesetting
code. The primary plane's field used to be cleared with memset(). This
has been dropped as the memory is always allocated with kzalloc().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-4-tzimmermann@suse.de

drm/ast: Fix invalid usage of AST_MAX_HWC_WIDTH in cursor atomic_check

Use AST_MAX_HWC_HEIGHT for setting offset_y in the cursor plane's
atomic_check. The code used AST_MAX_HWC_WIDTH instead. This worked
because both constants has the same value.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-3-tzimmermann@suse.de

drm/ast: Add constants for VGACRCB register bits

Set the bits in VGACRCB with constants. Alo move the rsp code into a
helper function.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-2-tzimmermann@suse.de

drm/stm: Fix bus_flags handling

The drm_display_mode_to_videomode() does not populate DISPLAY_FLAGS_DE_LOW
or DISPLAY_FLAGS_PIXDATA_NEGEDGE flags in struct videomode. Therefore, no
matter what polarity the next bridge or display might require, these flags
are never set, and thus the LTDC GCR_DEPOL and GCR_PCPOL bits are never set
and the LTDC behaves as if both DISPLAY_FLAGS_PIXDATA_POSEDGE and
DISPLAY_FLAGS_DE_HIGH were always set.

The fix for this problem is taken almost verbatim from MXSFB driver. In
case there is a bridge attached to the LTDC, the bridge might have extra
polarity requirements, so extract bus_flags from the bridge and use them
for LTDC configuration. Otherwise, extract bus_flags from the connector,
which is the display.

Fixes: b759012c5fa7 ("drm/stm: Add STM32 LTDC driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Antonio Borneo <antonio.borneo@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: dri-devel@lists.freedesktop.org
Tested-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127110756.125570-1-marex@denx.de

drm/panfrost: Stay in the threaded MMU IRQ handler until we've handled all IRQs

Doing a hw-irq -> threaded-irq round-trip is counter-productive, stay
in the threaded irq handler as long as we can.

v2:
* Rework the loop to avoid a goto

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205111757.585248-4-boris.brezillon@collabora.com

drm/panfrost: Don't try to map pages that are already mapped

We allocate 2MB chunks at a time, so it might appear that a page fault
has already been handled by a previous page fault when we reach
panfrost_mmu_map_fault_addr(). Bail out in that case to avoid mapping the
same area twice.

Cc: <stable@vger.kernel.org>
Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205111757.585248-3-boris.brezillon@collabora.com

drm/panfrost: Clear MMU irqs before handling the fault

When a fault is handled it will unblock the GPU which will continue
executing its shader and might fault almost immediately on a different
page. If we clear interrupts after handling the fault we might miss new
faults, so clear them before.

Cc: <stable@vger.kernel.org>
Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205111757.585248-2-boris.brezillon@collabora.com

drm/vram-helper: cleanup drm_gem_vram_bo_driver_move_notify

Swapping bo->mem was completely unecessary. Cleanup the function which
is just a leftover from a TTM cleanup.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210211131659.276275-1-christian.koenig@amd.com

drm/vmwgfx: Remove pointless code

There's no need to check for the presence of the hotplug
property just to return because this is the end of the function
so we're returning either way.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209161700.335611-2-zackr@vmware.com

drm/vmwgfx: Correctly set the name of the preferred mode

Our sysfs "modes" entries were broken because our preffered mode
never had its name set correctly. This resulted in the first
entry simply being called "preferred" followed by a list of
other resolutions. Lets fix it by actually setting the name of
mode (which is its resolution). This allows one to quickly
validate the modes set by the open-vm-tools.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209161700.335611-1-zackr@vmware.com

drm/vmwgfx: add some 16:9 / 16:10 default resolutions

The default list was old and in particular lacking all common 16:9
resolutions, as well as some newer 16:10 ones.
This makes them selectable in resolution change lists, which can be
quite useful (for instance in case auto-fit isn't enabled).

Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205010446.26559-1-sroland@vmware.com

drm: use getter/setter functions

Use getter and setter functions, for platform_device structures and a
mipi_dsi_device structure.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209211304.1261740-1-Julia.Lawall@inria.fr

drm/vblank: Document drm_crtc_vblank_restore constraints

I got real badly confused when trying to review a fix from Ville for
this. Let's try to document better what's required for this, and check
the minimal settings at runtime - we can't check ofc that there's
indeed no races in the driver callback.

Also noticed that the drm_vblank_restore version is unused, so lets
unexport that while at it.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209101523.2954281-1-daniel.vetter@ffwll.ch

drm/sun4i: Add alpha property for sun8i and sun50i VI layer

DE3.0 VI layers supports plane-global alpha channel.
DE2.0 FCC block have GLOBAL_ALPHA register that can be used as alpha source
for blender.

Add alpha property to the DRM plane and connect it to the
corresponding registers in the mixer.

Do not add alpha property for V3s SOC that have DE2.0 and 2 VI planes.

Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128113940.347013-3-r.stratiienko@gmail.com

drm/sun4i: Add alpha property for sun8i UI layer

DE2.0 and DE3.0 UI layers supports plane-global alpha channel.
Add alpha property to the DRM plane and connect it to the
corresponding registers in mixer.

Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128113940.347013-2-r.stratiienko@gmail.com

drm/aspeed: Use dt matching for default register values

There are minor differences in the values for the threshold value and
the scan line size between families of ASPEED SoC. Additionally the SCU
registers for the output control and scratch registers differ between
families.

This adds device tree matching to parameterise these values, allowing us
to add support for the AST2400 now, and in the future the AST2600.

Reviewed-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209123734.130483-3-joel@jms.id.au

drm/aspeed: Look up syscon by phandle

This scales better to multiple families of SoC. The lookup by compatible
can be removed in a future change.

The fallback path is for the ast2500 platform only. Other platforms will
be added with the new style, so they won't need fallback paths.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209123734.130483-2-joel@jms.id.au

drm/tilcdc: send vblank event when disabling crtc

When run xrandr to change resolution on Beaglebone Black board, it will
print the error information:

root@beaglebone:~# xrandr -display :0 --output HDMI-1 --mode 720x400
[drm:drm_crtc_commit_wait] *ERROR* flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:32:tilcdc crtc] commit wait timed out
[drm:drm_crtc_commit_wait] *ERROR* flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:34:HDMI-A-1] commit wait timed out
[drm:drm_crtc_commit_wait] *ERROR* flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:31:plane-0] commit wait timed out
tilcdc 4830e000.lcdc: already pending page flip!

This is because there is operation sequence as below:

drm_atomic_connector_commit_dpms(mode is DRM_MODE_DPMS_OFF):
    ...
    drm_atomic_helper_setup_commit <- init_completion(commit_A->flip_done)
    drm_atomic_helper_commit_tail
        tilcdc_crtc_atomic_disable
        tilcdc_plane_atomic_update <- drm_crtc_send_vblank_event in tilcdc_crtc_irq
                                      is skipped since tilcdc_crtc->enabled is 0
        tilcdc_crtc_atomic_flush   <- drm_crtc_send_vblank_event is skipped since
                                      crtc->state->event is set to be NULL in
                                      tilcdc_plane_atomic_update
drm_mode_setcrtc:
    ...
    drm_atomic_helper_setup_commit <- init_completion(commit_B->flip_done)
    drm_atomic_helper_wait_for_dependencies
        drm_crtc_commit_wait   <- wait for commit_A->flip_done completing

Just as shown above, the steps which could complete commit_A->flip_done
are all skipped and commit_A->flip_done will never be completed. This will
result a time-out ERROR when drm_crtc_commit_wait check the commit_A->flip_done.
So add drm_crtc_send_vblank_event in tilcdc_crtc_atomic_disable to
complete commit_A->flip_done.

Fixes: cb345decb4d2 ("drm/tilcdc: Use standard drm_atomic_helper_commit")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209082415.382602-1-quanyang.wang@windriver.com

drm/ttm: drop sysfs directory

Not used any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208133226.36955-3-christian.koenig@amd.com

drm/ttm: move memory accounting into vmwgfx v4

This is just another feature which is only used by VMWGFX, so move
it into the driver instead.

I've tried to add the accounting sysfs file to the kobject of the drm
minor, but I'm not 100% sure if this works as expected.

v2: fix typo in KFD and avoid 64bit divide
v3: fix init order in VMWGFX
v4: use pdev sysfs reference instead of drm

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Zack Rusin <zackr@vmware.com> (v3)
Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208133226.36955-2-christian.koenig@amd.com

drm/ttm: rework ttm_tt page limit v4

TTM implements a rather extensive accounting of allocated memory.

There are two reasons for this:
1. It tries to block userspace allocating a huge number of very small
   BOs without accounting for the kmalloced memory.

2. Make sure we don't over allocate and run into an OOM situation
   during swapout while trying to handle the memory shortage.

This is only partially a good idea. First of all it is perfectly
valid for an application to use all of system memory, limiting it to
50% is not really acceptable.

What we need to take care of is that the application is held
accountable for the memory it allocated. This is what control
mechanisms like memcg and the normal Linux page accounting already do.

Making sure that we don't run into an OOM situation while trying to
cope with a memory shortage is still a good idea, but this is also
not very well implemented since it means another opportunity of
recursion from the driver back into TTM.

So start to rework all of this by implementing a shrinker callback which
allows for TT object to be swapped out if necessary.

v2: Switch from limit to shrinker callback.
v3: fix gfp mask handling, use atomic for swapable_pages, add debugfs
v4: drop the extra gfp_mask checks

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208133226.36955-1-christian.koenig@amd.com

drm/ttm: fix removal of bo_count sysfs file

Only a zombie leftover from rebasing.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 3763d635deaa ("drm/ttm: add debugfs directory v2")
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209131756.24650-1-christian.koenig@amd.com

drm/vboxvideo: Implement cursor plane with struct drm_shadow_plane_state

Functions in the atomic commit tail are not allowed to acquire the
dmabuf's reservation lock. So we cannot legally call the GEM object's
vmap functionality in atomic_update.

Instead use struct drm_shadow_plane_state and friends. It vmaps the
framebuffer BOs in prepare_fb and vunmaps them in cleanup_fb. The
cursor plane state stores the mapping's address. The pinning of the
BO is implicitly done by vmap.

As an extra benefit, there's no source of runtime errors left in
atomic_update.

v2:
* rebase patch onto struct drm_shadow_plane_state

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209121042.24098-3-tzimmermann@suse.de

drm/gem: Export helpers for shadow-buffered planes

Export the helpers for shadow-buffered planes. These will be used by
several drivers.

v3:
* fix documentation typos and formatting (Daniel)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209121042.24098-2-tzimmermann@suse.de

drm/gma500: Never wait for blits

Blits cannot happen anymore since we removed the 2d accel code. Stop
checking for a busy blitter and remove the remaining blitter code.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201132617.1233-6-patrik.r.jakobsson@gmail.com

drm/gma500: psb_spank() doesn't need it's own file

Since everything else in accel_2d.c got removed we can move psb_spank()
into psb_drv.c where it is used.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201132617.1233-5-patrik.r.jakobsson@gmail.com

drm/gma500: Unify crtc helpers

CDV crtc helpers are identical to other chips so use gma_ prefix for the
crtc helper struct and remove the CDV copy.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201132617.1233-4-patrik.r.jakobsson@gmail.com

drm/gma500/cdv: Remove unused tv out paths

Afaik tv out is not available on Cedarview and the code isn't doing
anything so remove it.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201132617.1233-3-patrik.r.jakobsson@gmail.com

drm/gma500: Remove unused DPST support

DPST never got enabled so remove it. We keep the reg save/restore code
just for safety.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201132617.1233-2-patrik.r.jakobsson@gmail.com

drm/gma500/cdv: Remove unused code for crt init

Clearly never been used so just remove it.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201132617.1233-1-patrik.r.jakobsson@gmail.com

drm/gma500: Drop DRM_GMA600 config option

With support for the MID-only Medfield chips removed, simply build
the complete driver if DRM_GMA500 has been selected. Anyone who wants
to enable one of the chips would probably also want the rest.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 837f23bb4b60 ("drm/gma500: Drop DRM_GMA3600 config option")
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209112721.3421-1-tzimmermann@suse.de

drm/gma500: Remove in_atomic() usage.

The driver is using msleep() if it is safe to use based on in_atomic().
This is not needed this macro is only used from
i2c_algorithm::master_xfer() which is always invoked from preemptible
context.

Remove in_atomic() because it is superfluous. Remove wait_for_atomic()
because it has no users.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208233119.391103-2-bigeasy@linutronix.de

drm/udl: Move vmap out of commit tail

Vmap operations may acquire the dmabuf reservation lock, which is not
allowed within atomic commit-tail functions. Therefore move vmap and
vunmap from the damage handler into prepare_fb and cleanup_fb callbacks.

The mapping is provided as GEM shadow-buffered plane. The functions in
the commit tail use the pre-established mapping for damage handling.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-8-tzimmermann@suse.de

drm/gm12u320: Move vmap out of commit tail

Vmap operations may acquire the dmabuf reservation lock, which is not
allowed within atomic commit-tail functions. Therefore move vmap and
vunmap from the damage handler into prepare_fb and cleanup_fb callbacks.

The mapping is provided as GEM shadow-buffered plane. The functions in
the commit tail use the pre-established mapping for damage handling.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-7-tzimmermann@suse.de

drm/cirrus: Move vmap out of commit tail

Vmap operations may acquire the dmabuf reservation lock, which is not
allowed within atomic commit-tail functions. Therefore move vmap and
vunmap from the damage handler into prepare_fb and cleanup_fb callbacks.

The mapping is provided as GEM shadow-buffered plane. The functions in
the commit tail use the pre-established mapping for damage handling.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-6-tzimmermann@suse.de

drm/mgag200: Move vmap out of commit tail

Vmap operations may acquire the dmabuf reservation lock, which is not
allowed within atomic commit-tail functions. Therefore move vmap and
vunmap from the damage handler into prepare_fb and cleanup_fb callbacks.

The mapping is provided as GEM shadow-buffered plane. The functions in
the commit tail use the pre-established mapping for damage handling.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-5-tzimmermann@suse.de

drm: Add additional atomic helpers for shadow-buffered planes

Several drivers use GEM buffer objects as shadow buffers for the actual
framebuffer memory. Right now, drivers do these vmap operations in their
commit tail, which is actually not allowed by the locking rules for
the dma-buf reservation lock. The involved BO has to be vmapped in the
plane's prepare_fb callback and vunmapped in cleanup_fb.

This patch introduces atomic helpers for such shadow planes. Plane
functions manage the plane state for shadow planes. The provided
implementations for prepare_fb and cleanup_fb vmap and vunmap all BOs of
struct drm_plane_state.fb. The mappings are afterwards available in the
plane's commit-tail functions.

For now, all rsp drivers use the simple KMS helpers, so we add the plane
callbacks and wrappers for simple KMS. The internal plane functions can
later be exported as needed.

v3:
* documentation fixes
v2:
* make duplicate_state interface compatible with
  struct drm_plane_funcs

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-4-tzimmermann@suse.de

drm/gem: Export drm_gem_vmap() and drm_gem_vunmap()

The symbols will be required by the upcoming helpers for shadow-buffered
planes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-3-tzimmermann@suse.de

drm/simple-kms: Add plane-state helpers

Just like regular plane-state helpers, drivers can use these new
callbacks to create and destroy private plane state.

v2:
* make duplicate_state interface compatible with
  struct drm_plane_funcs

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-2-tzimmermann@suse.de

drm/lima: add governor data with pre-defined thresholds

This patch adapts the panfrost pre-defined thresholds change [0] to the
lima driver to improve real-world performance. The upthreshold value has
been set to ramp GPU frequency to max freq faster (compared to panfrost)
to compensate for the lower overall performance of utgard devices.

[0] https://patchwork.kernel.org/project/dri-devel/patch/20210121170445.19761-1-lukasz.luba@arm.com/

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127194047.21462-1-christianshewitt@gmail.com

drm/lima: Use delayed timer as default in devfreq profile

Devfreq framework supports 2 modes for monitoring devices.
Use delayed timer as default instead of deferrable timer
in order to monitor the GPU status regardless of CPU idle.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127105121.20345-1-lukasz.luba@arm.com

drm/mgag200: make a const array static, makes object smaller

Don't populate the const array m_div_val on the stack but instead make
it static. Makes the object code smaller by 29 bytes:

Before:
   text    data   bss   dec    hex filename
  34736    4552     0 39288   9978 drivers/gpu/drm/mgag200/mgag200_mode.o

After:
   text    data   bss   dec    hex filename
  34625    4616     0 39241   9949 drivers/gpu/drm/mgag200/mgag200_mode.o

(gcc version 10.2.0)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204191156.110778-1-colin.king@canonical.com

drm/scheduler: provide scheduler score externally

Allow multiple schedulers to share the load balancing score.

This is useful when one engine has different hw rings.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Leo Liu <leo.liu@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204144405.2737-1-christian.koenig@amd.com

drm/qxl: allocate dumb buffers in ram

dumb buffers are shadowed anyway, so there is no need to store them
in device memory.  Use QXL_GEM_DOMAIN_CPU (TTM_PL_SYSTEM) instead.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-11-kraxel@redhat.com

drm/qxl: simplify qxl_fence_wait

Now that we have the new release_event wait queue we can just
use that in qxl_fence_wait() and simplify the code a lot.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-10-kraxel@redhat.com

drm/qxl: properly free qxl releases

Reorganize qxl_device_fini() a bit.
Add missing unpin() calls.

Count releases.  Add wait queue for releases.  That way
qxl_device_fini() can easily wait until everything is
ready for proper shutdown.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-9-kraxel@redhat.com

drm/qxl: handle shadow in primary destroy

qxl_primary_atomic_disable must check whenever the framebuffer bo has a
shadow surface and in case it has check the shadow primary status.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-8-kraxel@redhat.com

drm/qxl: properly pin/unpin shadow

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-7-kraxel@redhat.com

drm/qxl: release shadow on shutdown

In case we have a shadow surface on shutdown release
it so it doesn't leak.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-6-kraxel@redhat.com

drm/qxl: unpin release objects

Balances the qxl_create_bo(..., pinned=true, ...);
call in qxl_release_bo_alloc().

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-5-kraxel@redhat.com

drm/qxl: use drmm_mode_config_init

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-4-kraxel@redhat.com

Revert "drm/qxl: do not run release if qxl failed to init"

This reverts commit b91907a6241193465ca92e357adf16822242296d.

Patch is broken, it effectively makes qxl_drm_release() a nop
because on normal driver shutdown qxl_drm_release() is called
*after* drm_dev_unregister().

Fixes: b91907a62411 ("drm/qxl: do not run release if qxl failed to init")
Cc: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-3-kraxel@redhat.com

drm/dp_mst: Use DP_MST_LOGICAL_PORT_0 instead of magic number

Use the macro defined for the first logical port instead of the
corresponding magic number.

Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-4-imre.deak@intel.com

drm/dp_mst: Remove redundant tile property setting

drm_get_edid() already updates the tile property since
commit 2de3a078497b ("drm/dp: Set the connector's TILE property even for DP SST connectors")
so no need to update it after calling this function.

Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-3-imre.deak@intel.com

drm/dp_mst: Don't cache EDIDs for physical ports

Caching EDIDs for physical ports prevents updating the EDID if a port
gets reconnected via a Connection Status Notification message, fix this.

Fixes: db1a07956968 ("drm/dp_mst: Handle SST-only branch device case")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-2-imre.deak@intel.com

drm/qxl: do not run release if qxl failed to init

if qxl_device_init() fail, drm device will not be registered,
in this case, do not run qxl_drm_release()

[    5.258534] ==================================================================
[    5.258931] BUG: KASAN: user-memory-access in qxl_destroy_monitors_object+0x42/0xa0 [qxl]
[    5.259388] Write of size 8 at addr 00000000000014dc by task modprobe/95
[    5.259754]
[    5.259842] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc6-00007-g88bb507a74ea #62
[    5.260309] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda54
[    5.260917] Call Trace:
[    5.261056]  dump_stack+0x7d/0xa3
[    5.261245]  kasan_report.cold+0x10c/0x10e
[    5.261475]  ? qxl_destroy_monitors_object+0x42/0xa0 [qxl]
[    5.261789]  check_memory_region+0x17c/0x1e0
[    5.262029]  qxl_destroy_monitors_object+0x42/0xa0 [qxl]
[    5.262332]  qxl_modeset_fini+0x9/0x20 [qxl]
[    5.262595]  qxl_drm_release+0x22/0x30 [qxl]
[    5.262841]  drm_dev_release+0x32/0x50
[    5.263047]  release_nodes+0x39e/0x410
[    5.263253]  ? devres_release+0x40/0x40
[    5.263462]  really_probe+0x2ea/0x420
[    5.263664]  driver_probe_device+0x6d/0xd0
[    5.263888]  device_driver_attach+0x82/0x90
[    5.264116]  ? device_driver_attach+0x90/0x90
[    5.264353]  __driver_attach+0x60/0x100
[    5.264563]  ? device_driver_attach+0x90/0x90
[    5.264801]  bus_for_each_dev+0xe1/0x140
[    5.265014]  ? subsys_dev_iter_exit+0x10/0x10
[    5.265251]  ? klist_node_init+0x61/0x80
[    5.265464]  bus_add_driver+0x254/0x2a0
[    5.265673]  driver_register+0xd3/0x150
[    5.265882]  ? 0xffffffffc0048000
[    5.266064]  do_one_initcall+0x84/0x250
[    5.266274]  ? trace_event_raw_event_initcall_finish+0x150/0x150
[    5.266596]  ? unpoison_range+0xf/0x30
[    5.266801]  ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[    5.267082]  ? unpoison_range+0xf/0x30
[    5.267287]  ? unpoison_range+0xf/0x30
[    5.267491]  do_init_module+0xf8/0x350
[    5.267697]  load_module+0x3fe6/0x4340
[    5.267902]  ? vm_unmap_ram+0x1d0/0x1d0
[    5.268115]  ? module_frob_arch_sections+0x20/0x20
[    5.268375]  ? __do_sys_finit_module+0x108/0x170
[    5.268624]  __do_sys_finit_module+0x108/0x170
[    5.268865]  ? __ia32_sys_init_module+0x40/0x40
[    5.269111]  ? file_open_root+0x200/0x200
[    5.269330]  ? do_sys_open+0x85/0xe0
[    5.269527]  ? filp_open+0x50/0x50
[    5.269714]  ? exit_to_user_mode_prepare+0xfc/0x130
[    5.269978]  do_syscall_64+0x33/0x40
[    5.270176]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[    5.270450] RIP: 0033:0x7fa3f685bcf7
[    5.270646] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d1
[    5.271634] RSP: 002b:00007ffca83048d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[    5.272037] RAX: ffffffffffffffda RBX: 0000000001e94a70 RCX: 00007fa3f685bcf7
[    5.272416] RDX: 0000000000000000 RSI: 0000000001e939e0 RDI: 0000000000000003
[    5.272794] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001
[    5.273171] R10: 00007fa3f68bf300 R11: 0000000000000246 R12: 0000000001e939e0
[    5.273550] R13: 0000000000000000 R14: 0000000001e93bd0 R15: 0000000000000001
[    5.273928] ==================================================================

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210203040727.868921-1-ztong0001@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: fix an error code in virtio_gpu_init()

If devm_request_mem_region() fails this code currently returns success
but it should return -EBUSY.

Fixes: 6076a9711dc5 ("drm/virtio: implement blob resources: probe for host visible region")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/YBpy0GS7GfmafMfe@mwanda
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/todo: Add entry for moving to dma_resv_lock

Requested by Thomas. I think it justifies a new level, since I tried
to make some forward progress on this last summer, and gave up (for
now). This is very tricky.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210122133624.1751802-1-daniel.vetter@ffwll.ch

drm/nouveau: remove set but not used variable ‘pdev’ in nouveau_bios_init

Fix follow warning:
drivers/gpu/drm/nouveau/nouveau_bios.c:2086:18: warning: variable ‘pdev’ set but not used [-Wunused-but-set-variable]
  struct pci_dev *pdev;
                  ^~~~

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210123013014.3815870-1-yebin10@huawei.com

drm/vmwgfx: Fix some memory leaks on errors

Dan noticed some issues with pci_release_region, this builds upon
that and fixes some other lingering issues. As part of this we
also can stop trying to manually free our managed device;
there's no need for it, it will be cleaned up automatically for us.

Fixes: 8772c0bb58bb ("drm/vmwgfx: Cleanup pci resource allocation")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128173756.121525-1-zackr@vmware.com

drm/vc4: remove unneeded variable: "ret"

remove unneeded variable: "ret".

Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210202122338.15351-1-bernard@vivo.com

drm: replace drm_modeset_lock_all() in drm_client_modeset_dpms_legacy()

This patch helps complete Use  DRM_MODESET_LOCK_ALL* helpers instead of
boilerplate todo in Documentation/gpu/todo.rst

Signed-off-by: Joseph Schulte <joeschulte.js@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125144815.8389-1-joeschulte.js@gmail.com

drm/v3d/v3d_sched: fix scheduler callbacks return status

Looks like this was not correctly adjusted.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: a6a1f036c74e ("drm/scheduler: Job timeout handler returns status (v3)")
Link: https://patchwork.freedesktop.org/patch/msgid/20210201091159.177853-1-christian.koenig@amd.com

drm/gma500: Remove dependency on TTM

The gma500 driver does not use TTM.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-6-tzimmermann@suse.de

drm/gma500: Remove CONFIG_X86 conditionals from source files

Remove the CONFIG_X86 conditionals from the source code. The driver
already depends on X86 in the Kconfig file. Also, no one has been
trying to build it on a non-x86 platform recently, or they would have
noticed that drm_ttm_cache_flush() doesn't exist.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-5-tzimmermann@suse.de

drm/gma500: Drop DRM_GMA3600 config option

With support for the MID-related chips removed, only support for
desktop chips is left in the driver. So just build the complete
driver if DRM_GMA500 has been selected. Anyone who wants to enable
the Poulsbo code would probably also want the Cedarview code.

[Patrik: Fixed conflict due to Oaktrail not being dropped]

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-4-tzimmermann@suse.de

drm/gma500: Remove Medfield support

Medfield is an outdated mobile platform with apparently no users left.
Remove it from gma500.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-2-tzimmermann@suse.de

dma-buf: Avoid comma separated statements

Use semicolons and braces.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/990bf6f33ccaf73ad56eb4bea8bd2c0db5e90a31.1598331148.git.joe@perches.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/lima: fix reference leak in lima_pm_busy

pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to putting operation will result in a
reference leak here.

A new function pm_runtime_resume_and_get is introduced in
[0] to keep usage counter balanced. So We fix the reference
leak by replacing it with new function.

[0] commit dd8088d5a896 ("PM: runtime: Add  pm_runtime_resume_and_get to deal with usage counter")

Fixes: 50de2e9ebbc0 ("drm/lima: enable runtime pm")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127094438.121003-1-miaoqinglang@huawei.com

drm/scheduler: Job timeout handler returns status (v3)

This patch does not change current behaviour.

The driver's job timeout handler now returns
status indicating back to the DRM layer whether
the device (GPU) is no longer available, such as
after it's been unplugged, or whether all is
normal, i.e. current behaviour.

All drivers which make use of the
drm_sched_backend_ops' .timedout_job() callback
have been accordingly renamed and return the
would've-been default value of
DRM_GPU_SCHED_STAT_NOMINAL to restart the task's
timeout timer--this is the old behaviour, and is
preserved by this patch.

v2: Use enum as the status of a driver's job
    timeout callback method.

v3: Return scheduler/device information, rather
    than task information.

Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Eric Anholt <eric@anholt.net>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Steven Price <steven.price@arm.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/415095/