KVM: nVMX: Reset eVMCS clean fields data from prepare_vmcs02()

When nested state migration happens during L1's execution, it
is incorrect to modify eVMCS as it is L1 who 'owns' it at the moment.
At least genuine Hyper-V seems to not be very happy when 'clean fields'
data changes underneath it.

'Clean fields' data is used in KVM twice: by copy_enlightened_to_vmcs12()
and prepare_vmcs02_rare() so we can reset it from prepare_vmcs02() instead.

While at it, update a comment stating why exactly we need to reset
'hv_clean_fields' data from L0.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-10-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Force enlightened VMCS sync from nested_vmx_failValid()

'need_vmcs12_to_shadow_sync' is used for both shadow and enlightened
VMCS sync when we exit to L1. The comment in nested_vmx_failValid()
validly states why shadow vmcs sync can be omitted but this doesn't
apply to enlightened VMCS as it 'shadows' all VMCS12 fields.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-9-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Ignore 'hv_clean_fields' data when eVMCS data is copied in vmx_get_nested_state()

'Clean fields' data from enlightened VMCS is only valid upon vmentry: L1
hypervisor is not obliged to keep it up-to-date while it is mangling L2's
state, KVM_GET_NESTED_STATE request may come at a wrong moment when actual
eVMCS changes are unsynchronized with 'hv_clean_fields'. As upon migration
VMCS12 is used as a source of ultimate truth, we must make sure we pick all
the changes to eVMCS and thus 'clean fields' data must be ignored.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Release enlightened VMCS on VMCLEAR

Unlike VMREAD/VMWRITE/VMPTRLD, VMCLEAR is a valid instruction when
enlightened VMCS is in use. TLFS has the following brief description:
"The L1 hypervisor can execute a VMCLEAR instruction to transition an
enlightened VMCS from the active to the non-active state". Normally,
this change can be ignored as unmapping active eVMCS can be postponed
until the next VMLAUNCH instruction but in case nested state is migrated
with KVM_GET_NESTED_STATE/KVM_SET_NESTED_STATE, keeping eVMCS mapped
may result in its synchronization with VMCS12 and this is incorrect:
L1 hypervisor is free to reuse inactive eVMCS memory for something else.

Inactive eVMCS after VMCLEAR can just be unmapped.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Introduce 'EVMPTR_MAP_PENDING' post-migration state

Unlike regular set_current_vmptr(), nested_vmx_handle_enlightened_vmptrld()
can not be called directly from vmx_set_nested_state() as KVM may not have
all the information yet (e.g. HV_X64_MSR_VP_ASSIST_PAGE MSR may not be
restored yet). Enlightened VMCS is mapped later while getting nested state
pages. In the meantime, vmx->nested.hv_evmcs_vmptr remains 'EVMPTR_INVALID'
and it's indistinguishable from 'evmcs is not in use' case. This leads to
certain issues, in particular, if KVM_GET_NESTED_STATE is called right
after KVM_SET_NESTED_STATE, KVM_STATE_NESTED_EVMCS flag in the resulting
state will be unset (and such state will later fail to load).

Introduce 'EVMPTR_MAP_PENDING' state to detect not-yet-mapped eVMCS after
restore. With this, the 'is_guest_mode(vcpu)' hack in vmx_has_valid_vmcs12()
is no longer needed.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Make copy_vmcs12_to_enlightened()/copy_enlightened_to_vmcs12() return 'void'

copy_vmcs12_to_enlightened()/copy_enlightened_to_vmcs12() don't return any result,
make them return 'void'.

No functional change intended.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Release eVMCS when enlightened VMENTRY was disabled

In theory, L1 can try to disable enlightened VMENTRY in VP assist page and
try to issue VMLAUNCH/VMRESUME. While nested_vmx_handle_enlightened_vmptrld()
properly handles this as 'EVMPTRLD_DISABLED', previously mapped eVMCS
remains mapped and thus all evmptr_is_valid() checks will still pass and
nested_vmx_run() will proceed when it shouldn't.

Release eVMCS immediately when we detect that enlightened vmentry was
disabled by L1.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Don't set 'dirty_vmcs12' flag on enlightened VMPTRLD

'dirty_vmcs12' is only checked in prepare_vmcs02_early()/prepare_vmcs02()
and both checks look like:

 'vmx->nested.dirty_vmcs12 || evmptr_is_valid(vmx->nested.hv_evmcs_vmptr)'

so for eVMCS case the flag changes nothing. Drop the assignment to avoid
the confusion.

No functional change intended.

Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Use '-1' in 'hv_evmcs_vmptr' to indicate that eVMCS is not in use

Instead of checking 'vmx->nested.hv_evmcs' use '-1' in
'vmx->nested.hv_evmcs_vmptr' to indicate 'evmcs is not in use' state. This
matches how we check 'vmx->nested.current_vmptr'. Introduce EVMPTR_INVALID
and evmptr_is_valid() and use it instead of raw '-1' check as a preparation
to adding other 'special' values.

No functional change intended.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: avoid loading PDPTRs after migration when possible

if new KVM_*_SREGS2 ioctls are used, the PDPTRs are
a part of the migration state and are correctly
restored by those ioctls.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210607090203.133058-9-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Introduce KVM_GET_SREGS2 / KVM_SET_SREGS2

This is a new version of KVM_GET_SREGS / KVM_SET_SREGS.

It has the following changes:
   * Has flags for future extensions
   * Has vcpu's PDPTRs, allowing to save/restore them on migration.
   * Lacks obsolete interrupt bitmap (done now via KVM_SET_VCPU_EVENTS)

New capability, KVM_CAP_SREGS2 is added to signal
the userspace of this ioctl.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210607090203.133058-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: introduce kvm_register_clear_available

Small refactoring that will be used in the next patch.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210607090203.133058-7-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: delay loading of PDPTRs to KVM_REQ_GET_NESTED_STATE_PAGES

Similar to the rest of guest page accesses after a migration,
this access should be delayed to KVM_REQ_GET_NESTED_STATE_PAGES.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210607090203.133058-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nSVM: refactor the CR3 reload on migration

Document the actual reason why we need to do it
on migration and move the call to svm_set_nested_state
to be closer to VMX code.

To avoid loading the PDPTRs from possibly not up to date memory map,
in nested_svm_load_cr3 after the move, move this code to
.get_nested_state_pages.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210607090203.133058-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Always load PDPTRs on CR3 load for SVM w/o NPT and a PAE guest

Kill off pdptrs_changed() and instead go through the full kvm_set_cr3()
for PAE guest, even if the new CR3 is the same as the current CR3.  For
VMX, and SVM with NPT enabled, the PDPTRs are unconditionally marked as
unavailable after VM-Exit, i.e. the optimization is dead code except for
SVM without NPT.

In the unlikely scenario that anyone cares about SVM without NPT _and_ a
PAE guest, they've got bigger problems if their guest is loading the same
CR3 so frequently that the performance of kvm_set_cr3() is notable,
especially since KVM's fast PGD switching means reloading the same CR3
does not require a full rebuild.  Given that PAE and PCID are mutually
exclusive, i.e. a sync and flush are guaranteed in any case, the actual
benefits of the pdptrs_changed() optimization are marginal at best.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210607090203.133058-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nSVM: Drop pointless pdptrs_changed() check on nested transition

Remove the "PDPTRs unchanged" check to skip PDPTR loading during nested
SVM transitions as it's not at all an optimization.  Reading guest memory
to get the PDPTRs isn't magically cheaper by doing it in pdptrs_changed(),
and if the PDPTRs did change, KVM will end up doing the read twice.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210607090203.133058-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Drop obsolete (and pointless) pdptrs_changed() check

Remove the pdptrs_changed() check when loading L2's CR3.  The set of
available registers is always reset when switching VMCSes (see commit
e5d03de5937e, "KVM: nVMX: Reset register cache (available and dirty
masks) on VMCS switch"), thus the "are PDPTRs available" check will
always fail.  And even if it didn't fail, reading guest memory to check
the PDPTRs is just as expensive as reading guest memory to load 'em.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210607090203.133058-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Introduce hyperv_features test

The initial implementation of the test only tests that access to Hyper-V
MSRs and hypercalls is in compliance with guest visible CPUID feature bits.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-31-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Move evmcs.h to x86_64/

evmcs.h is x86_64 only thing, move it to x86_64/ subdirectory.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-30-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: move Hyper-V MSR definitions to hyperv.h

These defines can be shared by multiple tests, move them to a dedicated
header.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-29-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED bit

Hypercalls which use extended processor masks are only available when
HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED privilege bit is exposed (and
'RECOMMENDED' is rather a misnomer).

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-28-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_X64_CLUSTER_IPI_RECOMMENDED bit

Hyper-V partition must possess 'HV_X64_CLUSTER_IPI_RECOMMENDED'
privilege ('recommended' is rather a misnomer) to issue
HVCALL_SEND_IPI hypercalls.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-27-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_X64_REMOTE_TLB_FLUSH_RECOMMENDED bit

Hyper-V partition must possess 'HV_X64_REMOTE_TLB_FLUSH_RECOMMENDED'
privilege ('recommended' is rather a misnomer) to issue
HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST/SPACE hypercalls.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-26-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_DEBUGGING privilege bit

Hyper-V partition must possess 'HV_DEBUGGING' privilege to issue
HVCALL_POST_DEBUG_DATA/HVCALL_RETRIEVE_DEBUG_DATA/
HVCALL_RESET_DEBUG_SESSION hypercalls.

Note, when SynDBG is disabled hv_check_hypercall_access() returns
'true' (like for any other unknown hypercall) so the result will
be HV_STATUS_INVALID_HYPERCALL_CODE and not HV_STATUS_ACCESS_DENIED.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-25-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_SIGNAL_EVENTS privilege bit

Hyper-V partition must possess 'HV_SIGNAL_EVENTS' privilege to issue
HVCALL_SIGNAL_EVENT hypercalls.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-24-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_POST_MESSAGES privilege bit

Hyper-V partition must possess 'HV_POST_MESSAGES' privilege to issue
HVCALL_POST_MESSAGE hypercalls.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-23-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Check access to HVCALL_NOTIFY_LONG_SPIN_WAIT hypercall

TLFS6.0b states that partition issuing HVCALL_NOTIFY_LONG_SPIN_WAIT must
posess 'UseHypercallForLongSpinWait' privilege but there's no
corresponding feature bit. Instead, we have "Recommended number of attempts
to retry a spinlock failure before notifying the hypervisor about the
failures. 0xFFFFFFFF indicates never notify." Use this to check access to
the hypercall. Also, check against zero as the corresponding CPUID must
be set (and '0' attempts before re-try is weird anyway).

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-22-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Prepare to check access to Hyper-V hypercalls

Introduce hv_check_hypercallr_access() to check if the particular hypercall
should be available to guest, this will be used with
KVM_CAP_HYPERV_ENFORCE_CPUID mode.

No functional change intended.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-21-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_STIMER_DIRECT_MODE_AVAILABLE privilege bit

Synthetic timers can only be configured in 'direct' mode when
HV_STIMER_DIRECT_MODE_AVAILABLE bit was exposed.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-20-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Inverse the default in hv_check_msr_access()

Access to all MSRs is now properly checked. To avoid 'forgetting' to
properly check access to new MSRs in the future change the default
to 'false' meaning 'no access'.

No functional change intended.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-19-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_FEATURE_DEBUG_MSRS_AVAILABLE privilege bit

Synthetic debugging MSRs (HV_X64_MSR_SYNDBG_CONTROL,
HV_X64_MSR_SYNDBG_STATUS, HV_X64_MSR_SYNDBG_SEND_BUFFER,
HV_X64_MSR_SYNDBG_RECV_BUFFER, HV_X64_MSR_SYNDBG_PENDING_BUFFER,
HV_X64_MSR_SYNDBG_OPTIONS) are only available to guest when
HV_FEATURE_DEBUG_MSRS_AVAILABLE bit is exposed.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-18-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE privilege bit

HV_X64_MSR_CRASH_P0 ... HV_X64_MSR_CRASH_P4, HV_X64_MSR_CRASH_CTL are only
available to guest when HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE bit is
exposed.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-17-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_ACCESS_REENLIGHTENMENT privilege bit

HV_X64_MSR_REENLIGHTENMENT_CONTROL/HV_X64_MSR_TSC_EMULATION_CONTROL/
HV_X64_MSR_TSC_EMULATION_STATUS are only available to guest when
HV_ACCESS_REENLIGHTENMENT bit is exposed.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-16-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_ACCESS_FREQUENCY_MSRS privilege bit

HV_X64_MSR_TSC_FREQUENCY/HV_X64_MSR_APIC_FREQUENCY are only available to
guest when HV_ACCESS_FREQUENCY_MSRS bit is exposed.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-15-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_MSR_APIC_ACCESS_AVAILABLE privilege bit

HV_X64_MSR_EOI, HV_X64_MSR_ICR, HV_X64_MSR_TPR, and
HV_X64_MSR_VP_ASSIST_PAGE  are only available to guest when
HV_MSR_APIC_ACCESS_AVAILABLE bit is exposed.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-14-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_MSR_SYNTIMER_AVAILABLE privilege bit

Synthetic timers MSRs (HV_X64_MSR_STIMER[0-3]_CONFIG,
HV_X64_MSR_STIMER[0-3]_COUNT) are only available to guest when
HV_MSR_SYNTIMER_AVAILABLE bit is exposed.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-13-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_MSR_SYNIC_AVAILABLE privilege bit

SynIC MSRs (HV_X64_MSR_SCONTROL, HV_X64_MSR_SVERSION, HV_X64_MSR_SIEFP,
HV_X64_MSR_SIMP, HV_X64_MSR_EOM, HV_X64_MSR_SINT0 ... HV_X64_MSR_SINT15)
are only available to guest when HV_MSR_SYNIC_AVAILABLE bit is exposed.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-12-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_MSR_REFERENCE_TSC_AVAILABLE privilege bit

HV_X64_MSR_REFERENCE_TSC is only available to guest when
HV_MSR_REFERENCE_TSC_AVAILABLE bit is exposed.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-11-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_MSR_RESET_AVAILABLE privilege bit

HV_X64_MSR_RESET is only available to guest when HV_MSR_RESET_AVAILABLE bit
is exposed.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-10-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_MSR_VP_INDEX_AVAILABLE privilege bit

HV_X64_MSR_VP_INDEX is only available to guest when
HV_MSR_VP_INDEX_AVAILABLE bit is exposed.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-9-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_MSR_TIME_REF_COUNT_AVAILABLE privilege bit

HV_X64_MSR_TIME_REF_COUNT is only available to guest when
HV_MSR_TIME_REF_COUNT_AVAILABLE bit is exposed.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_MSR_VP_RUNTIME_AVAILABLE privilege bit

HV_X64_MSR_VP_RUNTIME is only available to guest when
HV_MSR_VP_RUNTIME_AVAILABLE bit is exposed.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Honor HV_MSR_HYPERCALL_AVAILABLE privilege bit

HV_X64_MSR_GUEST_OS_ID/HV_X64_MSR_HYPERCALL are only available to guest
when HV_MSR_HYPERCALL_AVAILABLE bit is exposed.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Prepare to check access to Hyper-V MSRs

Introduce hv_check_msr_access() to check if the particular MSR
should be accessible by guest, this will be used with
KVM_CAP_HYPERV_ENFORCE_CPUID mode.

No functional change intended.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Cache guest CPUID leaves determining features availability

Limiting exposed Hyper-V features requires a fast way to check if the
particular feature is exposed in guest visible CPUIDs or not. To aboid
looping through all CPUID entries on every hypercall/MSR access cache
the required leaves on CPUID update.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Introduce KVM_CAP_HYPERV_ENFORCE_CPUID

Modeled after KVM_CAP_ENFORCE_PV_FEATURE_CPUID, the new capability allows
for limiting Hyper-V features to those exposed to the guest in Hyper-V
CPUIDs (0x40000003, 0x40000004, ...).

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

asm-generic/hyperv: add HV_STATUS_ACCESS_DENIED definition

From TLFSv6.0b, this status means: "The caller did not possess sufficient
access rights to perform the requested operation."

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: SVM: hyper-v: Direct Virtual Flush support

From Hyper-V TLFS:
 "The hypervisor exposes hypercalls (HvFlushVirtualAddressSpace,
  HvFlushVirtualAddressSpaceEx, HvFlushVirtualAddressList, and
  HvFlushVirtualAddressListEx) that allow operating systems to more
  efficiently manage the virtual TLB. The L1 hypervisor can choose to
  allow its guest to use those hypercalls and delegate the responsibility
  to handle them to the L0 hypervisor. This requires the use of a
  partition assist page."

Add the Direct Virtual Flush support for SVM.

Related VMX changes:
commit 6f6a657c9998 ("KVM/Hyper-V/VMX: Add direct tlb flush support")

Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Message-Id: <fc8d24d8eb7017266bb961e39a171b0caf298d7f.1622730232.git.viremana@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: SVM: hyper-v: Enlightened MSR-Bitmap support

Enlightened MSR-Bitmap as per TLFS:

 "The L1 hypervisor may collaborate with the L0 hypervisor to make MSR
  accesses more efficient. It can enable enlightened MSR bitmaps by setting
  the corresponding field in the enlightened VMCS to 1. When enabled, L0
  hypervisor does not monitor the MSR bitmaps for changes. Instead, the L1
  hypervisor must invalidate the corresponding clean field after making
  changes to one of the MSR bitmaps."

Enable this for SVM.

Related VMX changes:
commit ceef7d10dfb6 ("KVM: x86: VMX: hyper-v: Enlightened MSR-Bitmap support")

Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Message-Id: <87df0710f95d28b91cc4ea014fc4d71056eebbee.1622730232.git.viremana@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: SVM: hyper-v: Remote TLB flush for SVM

Enable remote TLB flush for SVM.

Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Message-Id: <1ee364e397e142aed662d2920d198cd03772f1a5.1622730232.git.viremana@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: SVM: Software reserved fields

SVM added support for certain reserved fields to be used by
software or hypervisor. Add the following reserved fields:
  - VMCB offset 0x3e0 - 0x3ff
  - Clean bit 31
  - SVM intercept exit code 0xf0000000

Later patches will make use of this for supporting Hyper-V
nested virtualization enhancements.

Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Message-Id: <a1f17a43a8e9e751a1a9cc0281649d71bdbf721b.1622730232.git.viremana@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: Move the remote TLB flush logic out of vmx

Currently the remote TLB flush logic is specific to VMX.
Move it to a common place so that SVM can use it as well.

Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Message-Id: <4f4e4ca19778437dae502f44363a38e99e3ef5d1.1622730232.git.viremana@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hyperv: SVM enlightened TLB flush support flag

Bit 22 of HYPERV_CPUID_FEATURES.EDX is specific to SVM and specifies
support for enlightened TLB flush. With this enlightenment enabled,
ASID invalidations flushes only gva->hpa entries. To flush TLB entries
derived from NPT, hypercalls should be used
(HvFlushGuestPhysicalAddressSpace or HvFlushGuestPhysicalAddressList)

Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Message-Id: <a060f872d0df1955e52e30b877b3300485edb27c.1622730232.git.viremana@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hyperv: Detect Nested virtualization support for SVM

Previously, to detect nested virtualization enlightenment support,
we were using HV_X64_ENLIGHTENED_VMCS_RECOMMENDED feature bit of
HYPERV_CPUID_ENLIGHTMENT_INFO.EAX CPUID as docuemented in TLFS:
 "Bit 14: Recommend a nested hypervisor using the enlightened VMCS
  interface. Also indicates that additional nested enlightenments
  may be available (see leaf 0x4000000A)".

Enlightened VMCS, however, is an Intel only feature so the above
detection method doesn't work for AMD. So, use the
HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS.EAX CPUID information ("The
maximum input value for hypervisor CPUID information.") and this
works for both AMD and Intel.

Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Message-Id: <43b25ff21cd2d9a51582033c9bdd895afefac056.1622730232.git.viremana@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: nSVM: Add a new VCPU statistic to show if VCPU is in guest mode

Add the following per-VCPU statistic to KVM debugfs to show if a given
VCPU is in guest mode:

guest_mode

Also add this as a per-VM statistic to KVM debugfs to show the total number
of VCPUs that are in guest mode in a given VM.

Signed-off-by: Krish Sadhukhan <Krish.Sadhukhan@oracle.com>
Message-Id: <20210609180340.104248-3-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: nSVM: 'nested_run' should count guest-entry attempts that make it to guest code

Currently, the 'nested_run' statistic counts all guest-entry attempts,
including those that fail during vmentry checks on Intel and during
consistency checks on AMD. Convert this statistic to count only those
guest-entries that make it past these state checks and make it to guest
code. This will tell us the number of guest-entries that actually executed
or tried to execute guest code.

Signed-off-by: Krish Sadhukhan <Krish.Sadhukhan@oracle.com>
Message-Id: <20210609180340.104248-2-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Drop "pre_" from enter/leave_smm() helpers

Now that .post_leave_smm() is gone, drop "pre_" from the remaining
helpers.  The helpers aren't invoked purely before SMI/RSM processing,
e.g. both helpers are invoked after state is snapshotted (from regs or
SMRAM), and the RSM helper is invoked after some amount of register state
has been stuffed.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609185619.992058-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Drop .post_leave_smm(), i.e. the manual post-RSM MMU reset

Drop the .post_leave_smm() emulator callback, which at this point is just
a wrapper to kvm_mmu_reset_context().  The manual context reset is
unnecessary, because unlike enter_smm() which calls vendor MSR/CR helpers
directly, em_rsm() bounces through the KVM helpers, e.g. kvm_set_cr4(),
which are responsible for processing side effects.  em_rsm() is already
subtly relying on this behavior as it doesn't manually do
kvm_update_cpuid_runtime(), e.g. to recognize CR4.OSXSAVE changes.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609185619.992058-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Rename SMM tracepoint to make it reflect reality

Rename the SMM tracepoint, which handles both entering and exiting SMM,
from kvm_enter_smm to kvm_smm_transition.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609185619.992058-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Move "entering SMM" tracepoint into kvm_smm_changed()

Invoke the "entering SMM" tracepoint from kvm_smm_changed() instead of
enter_smm(), effectively moving it from before reading vCPU state to
after reading state (but still before writing it to SMRAM!).  The primary
motivation is to consolidate code, but calling the tracepoint from
kvm_smm_changed() also makes its invocation consistent with respect to
SMI and RSM, and with respect to KVM_SET_VCPU_EVENTS (which previously
only invoked the tracepoint when forcing the vCPU out of SMM).

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609185619.992058-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Move (most) SMM hflags modifications into kvm_smm_changed()

Move the core of SMM hflags modifications into kvm_smm_changed() and use
kvm_smm_changed() in enter_smm().  Clear HF_SMM_INSIDE_NMI_MASK for
leaving SMM but do not set it for entering SMM.  If the vCPU is executing
outside of SMM, the flag should unequivocally be cleared, e.g. this
technically fixes a benign bug where the flag could be left set after
KVM_SET_VCPU_EVENTS, but the reverse is not true as NMI blocking depends
on pre-SMM state or userspace input.

Note, this adds an extra kvm_mmu_reset_context() to enter_smm().  The
extra/early reset isn't strictly necessary, and in a way can never be
necessary since the vCPU/MMU context is in a half-baked state until the
final context reset at the end of the function.  But, enter_smm() is not
a hot path, and exploding on an invalid root_hpa is probably better than
having a stale SMM flag in the MMU role; it's at least no worse.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609185619.992058-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Invoke kvm_smm_changed() immediately after clearing SMM flag

Move RSM emulation's call to kvm_smm_changed() from .post_leave_smm() to
.exiting_smm(), leaving behind the MMU context reset.  The primary
motivation is to allow for future cleanup, but this also fixes a bug of
sorts by queueing KVM_REQ_EVENT even if RSM causes shutdown, e.g. to let
an INIT wake the vCPU from shutdown.  Of course, KVM doesn't properly
emulate a shutdown state, e.g. KVM doesn't block SMIs after shutdown, and
immediately exits to userspace, so the event request is a moot point in
practice.

Moving kvm_smm_changed() also moves the RSM tracepoint.  This isn't
strictly necessary, but will allow consolidating the SMI and RSM
tracepoints in a future commit (by also moving the SMI tracepoint).
Invoking the tracepoint before loading SMRAM state also means the SMBASE
that reported in the tracepoint will point that the state that will be
used for RSM, as opposed to the SMBASE _after_ RSM completes, which is
arguably a good thing if the tracepoint is being used to debug a RSM/SMM
issue.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609185619.992058-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Replace .set_hflags() with dedicated .exiting_smm() helper

Replace the .set_hflags() emulator hook with a dedicated .exiting_smm(),
moving the SMM and SMM_INSIDE_NMI flag handling out of the emulator in
the process.  This is a step towards consolidating much of the logic in
kvm_smm_changed(), including the SMM hflags updates.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609185619.992058-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Emulate triple fault shutdown if RSM emulation fails

Use the recently introduced KVM_REQ_TRIPLE_FAULT to properly emulate
shutdown if RSM from SMM fails.

Note, entering shutdown after clearing the SMM flag and restoring NMI
blocking is architecturally correct with respect to AMD's APM, which KVM
also uses for SMRAM layout and RSM NMI blocking behavior.  The APM says:

  An RSM causes a processor shutdown if an invalid-state condition is
  found in the SMRAM state-save area. Only an external reset, external
  processor-initialization, or non-maskable external interrupt (NMI) can
  cause the processor to leave the shutdown state.

Of note is processor-initialization (INIT) as a valid shutdown wake
event, as INIT is blocked by SMM, implying that entering shutdown also
forces the CPU out of SMM.

For recent Intel CPUs, restoring NMI blocking is technically wrong, but
so is restoring NMI blocking in the first place, and Intel's RSM
"architecture" is such a mess that just about anything is allowed and can
be justified as micro-architectural behavior.

Per the SDM:

  On Pentium 4 and later processors, shutdown will inhibit INTR and A20M
  but will not change any of the other inhibits. On these processors,
  NMIs will be inhibited if no action is taken in the SMI handler to
  uninhibit them (see Section 34.8).

where Section 34.8 says:

  When the processor enters SMM while executing an NMI handler, the
  processor saves the SMRAM state save map but does not save the
  attribute to keep NMI interrupts disabled. Potentially, an NMI could be
  latched (while in SMM or upon exit) and serviced upon exit of SMM even
  though the previous NMI handler has still not completed.

I.e. RSM unconditionally unblocks NMI, but shutdown on RSM does not,
which is in direct contradiction of KVM's behavior.  But, as mentioned
above, KVM follows AMD architecture and restores NMI blocking on RSM, so
that micro-architectural detail is already lost.

And for Pentium era CPUs, SMI# can break shutdown, meaning that at least
some Intel CPUs fully leave SMM when entering shutdown:

  In the shutdown state, Intel processors stop executing instructions
  until a RESET#, INIT# or NMI# is asserted.  While Pentium family
  processors recognize the SMI# signal in shutdown state, P6 family and
  Intel486 processors do not.

In other words, the fact that Intel CPUs have implemented the two
extremes gives KVM carte blanche when it comes to honoring Intel's
architecture for handling shutdown during RSM.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609185619.992058-3-seanjc@google.com>
[Return X86EMUL_CONTINUE after triple fault. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Drop vendor specific functions for APICv/AVIC enablement

Now that APICv/AVIC enablement is kept in common 'enable_apicv' variable,
there's no need to call kvm_apicv_init() from vendor specific code.

No functional change intended.

Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210609150911.1471882-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Use common 'enable_apicv' variable for both APICv and AVIC

Unify VMX and SVM code by moving APICv/AVIC enablement tracking to common
'enable_apicv' variable. Note: unlike APICv, AVIC is disabled by default.

No functional change intended.

Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210609150911.1471882-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: x86: implement KVM PM-notifier

Implement PM hibernation/suspend prepare notifiers so that KVM
can reliably set PVCLOCK_GUEST_STOPPED on VCPUs and properly
suspend VMs.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Message-Id: <20210606021045.14159-2-senozhatsky@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: add PM-notifier

Add KVM PM-notifier so that architectures can have arch-specific
VM suspend/resume routines. Such architectures need to select
CONFIG_HAVE_KVM_PM_NOTIFIER and implement kvm_arch_pm_notifier().

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20210606021045.14159-1-senozhatsky@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Introduce x2APIC register manipulation functions

Standardize reads and writes of the x2APIC MSRs.

Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20210604172611.281819-11-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Hoist APIC functions out of individual tests

Move the APIC functions into the library to encourage code reuse and
to avoid unintended deviations.

Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20210604172611.281819-10-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Move APIC definitions into a separate file

Processor.h is a hodgepodge of definitions. Though the local APIC is
technically built into the CPU these days, move the APIC definitions
into a new header file: apic.h.

Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20210604172611.281819-9-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Disable vmcs02 posted interrupts if vmcs12 PID isn't mappable

Don't allow posted interrupts to modify a stale posted interrupt
descriptor (including the initial value of 0).

Empirical tests on real hardware reveal that a posted interrupt
descriptor referencing an unbacked address has PCI bus error semantics
(reads as all 1's; writes are ignored). However, kvm can't distinguish
unbacked addresses from device-backed (MMIO) addresses, so it should
really ask userspace for an MMIO completion. That's overly
complicated, so just punt with KVM_INTERNAL_ERROR.

Don't return the error until the posted interrupt descriptor is
actually accessed. We don't want to break the existing kvm-unit-tests
that assume they can launch an L2 VM with a posted interrupt
descriptor that references MMIO space in L1.

Fixes: 6beb7bd52e48 ("kvm: nVMX: Refactor nested_get_vmcs12_pages()")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210604172611.281819-8-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Fail on MMIO completion for nested posted interrupts

When the kernel has no mapping for the vmcs02 virtual APIC page,
userspace MMIO completion is necessary to process nested posted
interrupts. This is not a configuration that KVM supports. Rather than
silently ignoring the problem, try to exit to userspace with
KVM_INTERNAL_ERROR.

Note that the event that triggers this error is consumed as a
side-effect of a call to kvm_check_nested_events. On some paths
(notably through kvm_vcpu_check_block), the error is dropped. In any
case, this is an incremental improvement over always ignoring the
error.

Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210604172611.281819-7-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Add a return code to kvm_apic_accept_events

No functional change intended. At present, the only negative value
returned by kvm_check_nested_events is -EBUSY.

Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210604172611.281819-6-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Add a return code to inject_pending_event

No functional change intended. At present, 'r' will always be -EBUSY
on a control transfer to the 'out' label.

Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210604172611.281819-5-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Add a return code to vmx_complete_nested_posted_interrupt

No functional change intended.

Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20210604172611.281819-4-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Remove guest mode check from kvm_check_nested_events

A survey of the callsites reveals that they all ensure the vCPU is in
guest mode before calling kvm_check_nested_events. Remove this dead
code so that the only negative value this function returns (at the
moment) is -EBUSY.

Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210604172611.281819-2-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: x86: Add vmx_nested_tsc_scaling_test

Test that nested TSC scaling works as expected with both L1 and L2
scaled.

Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-12-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Enable nested TSC scaling

Calculate the TSC offset and multiplier on nested transitions and expose
the TSC scaling feature to L1.

Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-11-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: X86: Add vendor callbacks for writing the TSC multiplier

Currently vmx_vcpu_load_vmcs() writes the TSC_MULTIPLIER field of the
VMCS every time the VMCS is loaded. Instead of doing this, set this
field from common code on initialization and whenever the scaling ratio
changes.

Additionally remove vmx->current_tsc_ratio. This field is redundant as
vcpu->arch.tsc_scaling_ratio already tracks the current TSC scaling
ratio. The vmx->current_tsc_ratio field is only used for avoiding
unnecessary writes but it is no longer needed after removing the code
from the VMCS load path.

Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Message-Id: <20210607105438.16541-1-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: X86: Move write_l1_tsc_offset() logic to common code and rename it

The write_l1_tsc_offset() callback has a misleading name. It does not
set L1's TSC offset, it rather updates the current TSC offset which
might be different if a nested guest is executing. Additionally, both
the vmx and svm implementations use the same logic for calculating the
current TSC before writing it to hardware.

Rename the function and move the common logic to the caller. The vmx/svm
specific code now merely sets the given offset to the corresponding
hardware structure.

Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-9-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: X86: Add functions that calculate the nested TSC fields

When L2 is entered we need to "merge" the TSC multiplier and TSC offset
values of 01 and 12 together.

The merging is done using the following equations:
  offset_02 = ((offset_01 * mult_12) >> shift_bits) + offset_12
  mult_02 = (mult_01 * mult_12) >> shift_bits

Where shift_bits is kvm_tsc_scaling_ratio_frac_bits.

Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-8-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: X86: Add functions for retrieving L2 TSC fields from common code

In order to implement as much of the nested TSC scaling logic as
possible in common code, we need these vendor callbacks for retrieving
the TSC offset and the TSC multiplier that L1 has set for L2.

Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-7-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Add a TSC multiplier field in VMCS12

This is required for supporting nested TSC scaling.

Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-6-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: X86: Add a ratio parameter to kvm_scale_tsc()

Sometimes kvm_scale_tsc() needs to use the current scaling ratio and
other times (like when reading the TSC from user space) it needs to use
L1's scaling ratio. Have the caller specify this by passing the ratio as
a parameter.

Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-5-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: X86: Rename kvm_compute_tsc_offset() to kvm_compute_l1_tsc_offset()

All existing code uses kvm_compute_tsc_offset() passing L1 TSC values to
it. Let's document this by renaming it to kvm_compute_l1_tsc_offset().

Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-4-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: X86: Store L1's TSC scaling ratio in 'struct kvm_vcpu_arch'

Store L1's scaling ratio in the kvm_vcpu_arch struct like we already do
for L1's TSC offset. This allows for easy save/restore when we enter and
then exit the nested guest.

Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-3-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

math64.h: Add mul_s64_u64_shr()

This function is needed for KVM's nested virtualization. The nested TSC
scaling implementation requires multiplying the signed TSC offset with
the unsigned TSC multiplier.

Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-2-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86/mmu: Lazily allocate memslot rmaps

If the TDP MMU is in use, wait to allocate the rmaps until the shadow
MMU is actually used. (i.e. a nested VM is launched.) This saves memory
equal to 0.2% of guest memory in cases where the TDP MMU is used and
there are no nested guests involved.

Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210518173414.450044-8-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86/mmu: Skip rmap operations if rmaps not allocated

If only the TDP MMU is being used to manage the memory mappings for a VM,
then many rmap operations can be skipped as they are guaranteed to be
no-ops. This saves some time which would be spent on the rmap operation.
It also avoids acquiring the MMU lock in write mode for many operations.

This makes it safe to run the VM without rmaps allocated, when only
using the TDP MMU and sets the stage for waiting to allocate the rmaps
until they're needed.

Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210518173414.450044-7-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86/mmu: Add a field to control memslot rmap allocation

Add a field to control whether new memslots should have rmaps allocated
for them. As of this change, it's not safe to skip allocating rmaps, so
the field is always set to allocate rmaps. Future changes will make it
safe to operate without rmaps, using the TDP MMU. Then further changes
will allow the rmaps to be allocated lazily when needed for nested
oprtation.

No functional change expected.

Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210518173414.450044-6-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: mmu: Add slots_arch_lock for memslot arch fields

Add a new lock to protect the arch-specific fields of memslots if they
need to be modified in a kvm->srcu read critical section. A future
commit will use this lock to lazily allocate memslot rmaps for x86.

Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210518173414.450044-5-bgardon@google.com>
[Add Documentation/ hunk. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: mmu: Refactor memslot copy

Factor out copying kvm_memslots from allocating the memory for new ones
in preparation for adding a new lock to protect the arch-specific fields
of the memslots.

No functional change intended.

Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210518173414.450044-4-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86/mmu: Factor out allocating memslot rmap

Small refactor to facilitate allocating rmaps for all memslots at once.

No functional change expected.

Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210518173414.450044-3-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86/mmu: Deduplicate rmap freeing

Small code deduplication. No functional change expected.

Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210518173414.450044-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Do not write protect huge page in initially-all-set mode

Currently, when dirty logging is started in initially-all-set mode,
we write protect huge pages to prepare for splitting them into
4K pages, and leave normal pages untouched as the logging will
be enabled lazily as dirty bits are cleared.

However, enabling dirty logging lazily is also feasible for huge pages.
This not only reduces the time of start dirty logging, but it also
greatly reduces side-effect on guest when there is high dirty rate.

Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20210429034115.35560-3-zhukeqian1@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Support write protecting only large pages

Prepare for write protecting large page lazily during dirty log tracking,
for which we will only need to write protect gfns at large page
granularity.

No functional or performance change expected.

Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20210429034115.35560-2-zhukeqian1@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: hyper-v: Advertise support for fast XMM hypercalls

Now that kvm_hv_flush_tlb() has been patched to support XMM hypercall
inputs, we can start advertising this feature to guests.

Cc: Alexander Graf <graf@amazon.com>
Cc: Evgeny Iakovlev <eyakovl@amazon.de>
Signed-off-by: Siddharth Chandrasekaran <sidcha@amazon.de>
Message-Id: <e63fc1c61dd2efecbefef239f4f0a598bd552750.1622019134.git.sidcha@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: kvm_hv_flush_tlb use inputs from XMM registers

Hyper-V supports the use of XMM registers to perform fast hypercalls.
This allows guests to take advantage of the improved performance of the
fast hypercall interface even though a hypercall may require more than
(the current maximum of) two input registers.

The XMM fast hypercall interface uses six additional XMM registers (XMM0
to XMM5) to allow the guest to pass an input parameter block of up to
112 bytes.

Add framework to read from XMM registers in kvm_hv_hypercall() and use
the additional hypercall inputs from XMM registers in kvm_hv_flush_tlb()
when possible.

Cc: Alexander Graf <graf@amazon.com>
Co-developed-by: Evgeny Iakovlev <eyakovl@amazon.de>
Signed-off-by: Evgeny Iakovlev <eyakovl@amazon.de>
Signed-off-by: Siddharth Chandrasekaran <sidcha@amazon.de>
Message-Id: <fc62edad33f1920fe5c74dde47d7d0b4275a9012.1622019134.git.sidcha@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: hyper-v: Collect hypercall params into struct

As of now there are 7 parameters (and flags) that are used in various
hyper-v hypercall handlers. There are 6 more input/output parameters
passed from XMM registers which are to be added in an upcoming patch.

To make passing arguments to the handlers more readable, capture all
these parameters into a single structure.

Cc: Alexander Graf <graf@amazon.com>
Cc: Evgeny Iakovlev <eyakovl@amazon.de>
Signed-off-by: Siddharth Chandrasekaran <sidcha@amazon.de>
Message-Id: <273f7ed510a1f6ba177e61b73a5c7bfbee4a4a87.1622019133.git.sidcha@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>