mesa: fix crash in find_value

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4584>

nir: Delete the fnoise opcodes

As of the previous commit, they are never used.

Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4624>

glsl: Hard-code noise to zero in builtin_functions.cpp

Version 4.4 of the GLSL spec changed the definition of noise*() to
always return zero and earlier versions of the spec allowed zero as a
valid implementation.

All drivers, as far as I can tell, unconditionally call lower_noise()
today which turns ir_unop_noise into zero.  We've got a 10-year-old
comment in there saying "In the future, ir_unop_noise may be replaced by
a call to a function that implements noise."  Well, it's the future now
and we've not yet gotten around to that.  In the mean time, the GLSL
spec has made doing so illegal.

To make things worse, we then pretend to handle the opcode in
glsl_to_nir, ir_to_mesa, and st_glsl_to_tgsi even though it should never
get there given the lowering.  The lowering in st_glsl_to_tgsi defines
noise*() to be 0.5 which is an illegal implementation of the noise
functions according to pre-4.4 specs.  We also have opcodes for this in
NIR which are never used because, again, we always call lower_noise().

Let's just kill the whole opcode and make builtin_builder.cpp build a
bunch of functions that just return zero.

Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4624>

st/glsl_to_nir: make use of nir linker for linking uniforms

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4395>

glsl: fix gl_nir_set_uniform_initializers() for bindless textures

We need to skip opaque variables inside blocks, this is handled
elsewhere and will cause a crash here.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4395>

glsl: add bindless support to nir uniform linker

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4395>

pick-ui: show commit sha in the pick list

Useful to get more context when a manual merge is needed, for instance.

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4651>

pick-ui: make .pick_status.json path relative to the git root instead of the script

This allows the script to be called from another git worktree for instance,
which I need for my workflow :)

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4649>

pick-ui: compute .pick_status.json path only once

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4649>

intel/fs: Coalesce when the src live range is contained in the dst

Consider the following case:

    // g119-123 are written somewhere above
    mul.sat(16)   g67<1>F    g6.4<0,1,0>F   g125<8,8,1>F
    mul.sat(16)   g69<1>F    g6.5<0,1,0>F   g125<8,8,1>F
    mul.sat(16)   g71<1>F    g6.6<0,1,0>F   g125<8,8,1>F
    mov(16)       g119<1>F   g67<8,8,1>F
    mov(16)       g121<1>F   g69<8,8,1>F
    mov(16)       g123<1>F   g71<8,8,1>F

We should be able to coalesce it into

    mul.sat(16)   g119<1>F   g6.4<0,1,0>F   g125<8,8,1>F
    mul.sat(16)   g121<1>F   g6.5<0,1,0>F   g125<8,8,1>F
    mul.sat(16)   g123<1>F   g6.6<0,1,0>F   g125<8,8,1>F

What's stopping us is an overly conservative check for writes to the two
registers being coalesced.  The check walks over the intersection of
their live ranges and checks for no writes to either one.  However,
because the register which starts the live range (the mul.sat in this
case) is inside that intersection, we flag it as a write in the
intersection and don't coalesce.  However, this case is safe because the
destination register of the copy is never read after the source is
written.

Shader-db changes on ICL:

    total instructions in shared programs: 16043613 -> 16042610 (<.01%)
    instructions in affected programs: 43036 -> 42033 (-2.33%)
    helped: 226
    HURT: 0
    helped stats (abs) min: 1 max: 30 x̄: 4.44 x̃: 4
    helped stats (rel) min: 0.09% max: 26.67% x̄: 4.89% x̃: 3.43%
    95% mean confidence interval for instructions value: -4.86 -4.02
    95% mean confidence interval for instructions %-change: -5.57% -4.22%
    Instructions are helped.

    total cycles in shared programs: 334766372 -> 334710124 (-0.02%)
    cycles in affected programs: 617548 -> 561300 (-9.11%)
    helped: 214
    HURT: 2
    helped stats (abs) min: 15 max: 1512 x̄: 263.21 x̃: 212
    helped stats (rel) min: 0.30% max: 75.36% x̄: 25.30% x̃: 21.58%
    HURT stats (abs)   min: 40 max: 40 x̄: 40.00 x̃: 40
    HURT stats (rel)   min: 0.15% max: 0.15% x̄: 0.15% x̃: 0.15%
    95% mean confidence interval for cycles value: -277.91 -242.90
    95% mean confidence interval for cycles %-change: -27.58% -22.55%
    Cycles are helped.

No spill/fill changes or gained/lost

Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4627>

intel/fs: Rename block to scan_block in can_coalesce_vars

Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4627>

radv: use common nir_convert_ycbcr

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: D Scott Phillips <d.scott.phillips@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4528>

anv: use common nir_convert_ycbcr

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: D Scott Phillips <d.scott.phillips@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4528>

nir: convert_ycbcr: preserve alpha channel

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: D Scott Phillips <d.scott.phillips@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4528>

nir: add common convert_ycbcr for vulkan csc

Copied from anv, replaced state with passing model/range directly.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: D Scott Phillips <d.scott.phillips@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4528>

nir/linking: fix issue with two compact variables in a row. (v2)

If we have a clip dist float[1] compact followed by a tess factor
float[2] we don't want to overlap them, but the partial check
only happens for non-compact vars.

This fixes some issues seen with my sw vulkan layer with
dEQP-VK.clipping.user_defined.clip_distance*

v2: v1 failed with clip/cull mixtures, since in that
case the cull has a location_frac to follow after the clip
so only reset if we get a location_frac of 0 in a subsequent
clip var

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4635>

pick-ui: auto-scroll the feedback window

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4650>

bin/pick-ui: Add a new maintainer script for picking patches

In the long term the goal of this script is to nearly completely
automate the process of picking stable nominations, in a well tested
way.

In the short term the goal is to provide a better, faster UI to interact
with stable nominations.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3608>

bin/gen_release_notes.py: Fix version detection for .0 release

The previous version is being calculated incorrectly, resulting in
20.0.0 deciding it's version is 19.3.x+1. This fixes that.

Fixes: 3226b12a09bbcbd25526fd6da6257057d26ddb31
       ("release: Add an update_release_calendar.py script")

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4070>

anv: Add support for new MMAP_OFFSET ioctl.

v2: Update getparam check (Ken).

[jordan.l.justen@intel.com: use 0 offset for MMAP_OFFSET]

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1675>

anv: Add anv_device parameter to anv_gem_munmap.

Also update all of its callers.

On the next commit, the device will be used by anv_gem_munmap to choose
whether we need to call the valgrind code or not, depending on which
type of mmap we are using.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1675>

iris/bufmgr: Add support for MMAP_OFFSET ioctl.

Use the new DRM_IOCTL_I915_GEM_MMAP_OFFSET ioctl when available.

[jordan.l.justen@intel.com: iris port]
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
v2: Update getparam check (Ken).

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1675>

i965/bufmgr: Add support for MMAP_OFFSET ioctl.

Use the new DRM_IOCTL_I915_GEM_MMAP_OFFSET ioctl when available.

v2: update getparam check (Ken).

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1675>

iris/bufmgr: Factor out GEM_MMAP ioctl from mmap_cpu and mmap_wc.

We want to add a new ioctl for mmap'ing buffers, so let's avoid
duplicating that code on both functions by extracting it from them
first.

[jordan.l.justen@intel.com: iris port]
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
v2: Rename helper function names (Ken).

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1675>

i965/bufmgr: Factor out GEM_MMAP ioctl from mmap_cpu and mmap_wc.

We want to add a new ioctl for mmap'ing buffers, so let's avoid
duplicating that code on both functions by extracting it from them
first.

v2: Update helper function names (Ken).

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1675>

drm-uapi: Update headers from Linux 5.7-rc1.

commit 8f3d9f354286745c751374f5f1fcafee6b3f3136
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Sun Apr 12 12:35:55 2020 -0700

    Linux 5.7-rc1

Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1675>

spirv: Fix propagation of OpVariable access flags

After the decorations of a variable are evaluated, propagate the
access flag to the associated vtn_pointer.  This was done when
creating the pointer but at that point there was no access flags for
the variable.

Inline the pointer creation to make this point clearer, in isolation
the helper made the impression that the value was being propagated.

Issue found by Ken.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4620>

intel/fs,vec4: Properly account SENDs in IVB memory fence

Change brw_memory_fence to return the number of messages emitted, and
use that to update the send_count statistic in code generation.

This will fix the book-keeping for IVB since the memory fences will
result in two SEND messages.

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4646>

aco: move src1 to vgpr instead of using VOP3 for VOP2 instructions during isel

Is simpler and helps a couple of shaders.
Totals from affected shaders: (Vega)
Code Size: 16341296 -> 16335460 (-0.04 %) bytes

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4642>

aco: fix 64bit fsub

Fixes: 425558bfd595ed3a7a049ad0f47a46b8b3c4691e ('aco: use v_subrev_f32 for fsub with an sgpr operand in src1')

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4642>

gitlab-ci: Test virgl driver

Add virglrenderer to the container and use the vtest transport to test
the Gallium driver. On the "host", llvmpipe is used.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4433>

meson: do not disable incremental linking for debug-builds

Meson specifies /EDITANDCONTINUE for MSVC projects when using the debug
build-type. This collides with our across-the-board disabling of
incremental linking.

It's clear that we don't want to do incremental linking for
release-builds; it increase the code-size, and adds some needless jumps
to be able to patch in new code. But for debug-builds this seems like a
good thing; we can now debug and on-the-fly recompile changes if we want
to.

This flag seems to have been simply forwarded from the SCons build
system, where it makes a bit more sense; SCons doesn't really integrate
with visual studio, so you can't properly debug with it. But Meson does,
so let's keep some bells-and-whistles here.

So let's avoid disabling incremental linking for debug-builds. For other
builds we still want to do this, because Meson only disables it
automatically for minsize-builds.

This avoids a boat-loads of warnings on the form:

warning LNK4075: ignoring '/EDITANDCONTINUE' due to '/INCREMENTAL:NO' specification

Acked-by: Jose Fonseca <jfonseca@vmware.com>
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4572>

gtest: Update to 1.10.0

Acked-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4576>

nir/opt_algebraic: lower 64-bit fmin3/fmax3/fmed3

This unconditionally lowers 64-bit fmin3/fmax3/fmed3 because
AMD hardware doesn't have native instructions, and no drivers
except RADV uses these instructions.

Fixes dEQP-VK.spirv_assembly.instruction.amd_trinary_minmax.*.f64.*
with ACO.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4570>

nir/lower_int64: lower imin3/imax3/umin3/umax3/imed3/umed3

Fixes dEQP-VK.spirv_assembly.instruction.amd_trinary_minmax.*.i64.*
with ACO because this backend compiler expects most of the 64-bit
operations to be lowered.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4570>

radeonsi: skip vs output optimizations for some outputs

If PT_SPRITE_TEX is enabled, PS inputs are overriden at runtime so
we can't apply the vs output optim.

Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2747
Fixes: 3ec9975555d ("radeonsi: eliminate trivial constant VS outputs")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4559>

nir/gcm: dont move movs unless we can replace them later with their src

This helps us avoid moving the movs outside if branches when there
src can't be scalarized.

For example it avoids:

   vec4 32 ssa_7 = tex ssa_6 (coord), 0 (texture), 0 (sampler),
   if ... {
      r0 = imov ssa_7.z
      r1 = imov ssa_7.y
      r2 = imov ssa_7.x
      r3 = imov ssa_7.w
      ...
   } else {
      ...
      if ... {
         r0 = imov ssa_7.x
         r1 = imov ssa_7.w
         ...
      else {
         r0 = imov ssa_7.z
         r1 = imov ssa_7.y
         ...
      }
      r2 = imov ssa_7.x
      r3 = imov ssa_7.w
   }
   ...
   vec4 32 ssa_36 = vec4 r0, r1, r2, r3

Becoming something like:

   vec4 32 ssa_7 = tex ssa_6 (coord), 0 (texture), 0 (sampler),
   r0 = imov ssa_7.z
   r1 = imov ssa_7.y
   r2 = imov ssa_7.x
   r3 = imov ssa_7.w

   if ... {
      ...
   } else {
      if ... {
         r0 = imov r2
         r1 = imov r3
         ...
      else {
         ...
      }
      ...
   }

While this is has a smaller instruction count it requires more work
for the same result. With more complex examples we can also end up
shuffling the registers around in a way that requires more registers
to use as temps so that we don't overwrite our original values along
the way.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4636>

nir/gcm: be more conservative about moving instructions from loops

Here we only pull instructions further up control flow if they are
constant or texture instructions. See the code comment for more
information.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4636>

nir/gcm: allow derivative dependent intrinisics to be moved earlier

We can't move them later as we could move them into non-uniform
control flow, but moving them earlier should be fine.

This helps avoid a bunch of spilling in unigine shaders due to
moving the tex instructions sources earlier (outside if branches)
but not the instruction itself.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4636>

nir/gcm: Prefer the instruction's original block

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4636>

nir/gcm: Delete dead instructions

Classically, global code motion is also a dead code pass.  However, in
the initial implementation, the decision was made to place every
instruction and let conventional DCE clean up the dead ones.  Because
any uses of a dead instruction are unreachable, we have no late block
and the dead instructions are always scheduled early.  The problem is
that, because we place the dead instruction early, it  pushes the
placement of any dependencies of the dead instruction earlier than they
may need to be placed.  In order prevent dead instructions from
affecting the placement of live ones, we need to delete them.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4636>

nir/gcm: Add a real concept of "progress"

Now that the GCM pass is more conservative and only moves instructions
to different blocks when it's advantageous to do so, we can have a
proper notion of what it means to make progress.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4636>

nir/gcm: Move block choosing into a helper function

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4636>

nir/gcm: Use an array for storing the early block

We are about to adjust our instruction block assignment algorithm and we
will want to know the current block that the instruction lives in.  In
order to allow for this, we can't overwrite nir_instr::block in the
early scheduling pass.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4636>

nir/gcm: Loop over blocks in pin_instructions

Now that we have the new block iterators, we can simplify things a bit.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4636>

nir/dominance: Better handle unreachable blocks

v2: Fix minor comments (Ken)

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4636>

aco: use v_subrev_f32 for fsub with an sgpr operand in src1

This fixes an accidentally introduced regression.

Fixes: 9be4be515f2a08b9c9e5ae1fc4c5dc9a830c2337 ('aco: implement 16-bit nir_op_fsub/nir_op_fadd')
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4633>

CI: Disable Lima jobs due to lab unhealthiness

The BayLibre LAVA host appears to be down.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4631>

ci/windows: Make Chocolatey installs more reliable

Chocolatey installs depend on downloading binaries from SourceForge,
which is an unreliable host: container builds often fail because it
cannot pick up winflexbison.

Add a loop to retry chocolatey installs if any installs have failed, and
ensure Python is in the accessible PowerShell path rather than relying
on the path being externally refreshed.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4631>

nir: Lower returns correctly inside nested loops

Inside nested flow control, nir_lower_returns inserts predicated breaks
in the outer block. However, it would omit doing this if the remainder
of the outer block (after the inner block) was empty. This is not
correct in the case of loops, as execution just wraps back around to the
start of the loop, so this change doesn't skip the predication inside
loops.

Fixes: 79dec93ead6e (nir: Add return lowering pass)
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2724

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4603>

anv: Apply any needed PIPE_CONTROLs before emitting state

Push constants in particular can get picked up by the hardware at weird
times that happen *before* 3DPRIMITIVE.  Therefore, we need to flush
before we emit all our state to ensure that any data they may pick up is
in memory in time.  This fixes an app which does vkCmdCopyBuffers
immediately followed by a vkCmdBeginRenderPass and vkCmdDraw which uses
the destination of the copy as a UBO which we push.

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4601>

anv: Move vb_emit setup closer to where it's used in flush_state

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4601>

Fix promotion of floats to doubles

Use the f variants of the math functions if the input parameter is a
float, saves converting from float to double and running the double
variant of the math function for gaining no precision at all

Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3969>

ir3/ra: Fix off-by-one issues with live-range extension

The intersects() function assumes that inside each instruction values
always die before they are defined, so that if the end of one range is
the same instruction as the beginning of the next then they don't
intersect. However, this isn't the case for values that become live at
the beginning of a basic block, which become live *before* the first
instruction, or instructions that die at the end of a basic block which
die after the last instruction.

For example, imagine that we have two values, A which is defined earlier
in the block and B which is defined in the last instruction of the block
and both die at the end of the basic block (e.g. are used in the next
iteration of a loop). We would compute a range for A of, say, (10, 20)
and for B of (20, 20) since each block's end_ip is the same as the ip of
the last instruction, and RA would consider them to not interfere.
There's a similar problem with values that become live at the beginning.

The fix is to offset the block's start_ip and end_ip by one so that they
don't correspond to any actual instruction. One way to think about this
is that we're adding fake instructions at the beginning and end of a
block where values become live & die. We could invert the order, so that
values consumed by each instruction are considered dead at the end of
the previous instruction, but then values that become dead at the
beginning of the basic block would incorrectly have an empty live range,
with a similar problem at the end of the basic block if we try to say
that values are defined at the beginning of the next instruction. So
the extra padding instructions are unavoidable.

This fixes an accidental infinite loop in the shader for
dEQP-VK.spirv_assembly.type.scalar.u32.switch_vert.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4614>

util/sparse_free_list: manipulate node pointers using atomic primitives

Probably doesn't fix anything but those should be accessed in an
atomic way just like the head pointer.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: e4f01eca3b3cd1 ("util: Add a free list structure for use with util_sparse_array")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4613>

glsl: only set stage ref when uniforms referenced in stage

This updates the NIR uniform linker to behave like the GLSL IR
linker and fixes a number of CTS tests once we enable the NIR
linker for glsl.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4623>

glsl: pull mark_array_elements_referenced() out into common helper

We will reuse this helper in the NIR linker in the following
patches.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4623>

glsl: fix block index in NIR uniform linker

We only want to set the index for the first block of an array. Also
add a comment about why we do not break here.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4623>

glsl: error check max user assignable uniform locations

This adds the error check to the NIR uniform linker.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4623>

glsl: fix explicit locations for the glsl linker

We already reserved explicit locations in the GLSL linker.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4623>

Revert "glsl: fix resizing of the uniform remap table"

This reverts commit e0aa0a839f9c168784a1f50013c83877cc876094.

Instead we fix it correctly in the following patch.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4623>

glsl: tidy up uniform storage value count code in NIR linker

This makes the code cleaner and better reflects what the existing
glsl IR  linker does possibly fixing subtle bugs.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4623>

glsl: fix struct offsets in the nir uniform linker

This change properly applies layouts to structs of uniforms in a
similar way to the GLSL IR linker.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4623>

nir: add matrix_layout to nir_variable data

This will be used by the following patch.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4623>

anv: skip writing perfcntr in results on Gen12+

We were not capturing the register already so don't bother writing the
delta in the results (we were previously doing a delta between two 0
values).

v2: Fix unused function warning

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4586>

intel/perf: Enable MDAPI queries for Gen12

We're missing the cases for gen12 leading to those metrics going
missing.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 15b7b56eb2fb41 ("intel/perf: add TGL support")
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4586>

pan/bit: Add fp16 min/max tests

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bit: Add constants test

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bit: Add fexp2_fast test

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bit: Add fexp2_fast interp

Kind of a hack and not at all how the h/w does it.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bit: Add FMA_MSCALE test

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bit: _MSCALE interp

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bit: Add BI_TABLE test

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bit: Add log2 helper interp

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bit: Add FMA_REDUCE test

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bit: Add BI_REDUCE_FMA interp

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bit: Add frexp_log test

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bit: Add FREXP interp support

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Lower special ops to 32-bit

We don't have 16-bit tables. We could probably do a bit better to avoid
so many conversions but hey.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Round constants to 32-bit

We can only access lo/hi at 32-bit intervals.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Dump extra bits for disasm

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Pack MAX.v2f16

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Pack ADD.v2f16

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Structify add and min/max fp16 ADD

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Workaround constant packing errata

Incomplete fix.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Try to reuse constants in ALU

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Handle st_vary with <4 components

Still no writemasks.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Fix vec2/3 handling

Otherwise we get moves from null.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Implement flog2

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Add fexp2 implementation

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Fix lower_combine swizzle rewrite

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Fix packing with low-nibble-set on hi constant

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Fix packing with multiple constants

Need to use bottom nibble of the 64, not the half.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Fix bi_get_immediate with multiple imms

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Ensure CONSTANT srcs have types

So the next commit is valid.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Split src/dest index printing

So we can handle constant printing correctly.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Add fexp2_fast packing

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Pack FMA_MSCALE

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Structify FMA_MSCALE

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>

pan/bi: Add _MSCALE flag for FMA/ADD

So we can bias by exponents.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4615>