Tim-Philipp Müller [Sat, 26 Apr 2014 23:36:32 +0000 (00:36 +0100)]
docs: remove outdated and pointless 'Last reviewed' lines from docs
They are very confusing for people, and more often than not
also just not very accurate. Seeing 'last reviewed: 2005' in
your docs is not very confidence-inspiring. Let's just remove
those comments.
Gwenole Beauchesne [Sat, 26 Apr 2014 06:08:57 +0000 (08:08 +0200)]
codecparsers: h264: fix derivation of default scaling lists.
When useDefaultScalingMatrixFlag is computed to be 1 while parsing
scaling_list(), then the scaling list shall be inferred to be equal
to the default list (7.4.2.1.1.1). That default list is really one
of Default_4x4_{Intra,Inter} or Default_8x8_{Intra,Inter} and not
one from fall-back rule sets A or B.
This fixes parsing for FRExt1_Panasonic_D, FRExt2_Panasonic_C,
FRExt3_Panasonic_E and FRExt4_Panasonic_B.
https://bugzilla.gnome.org/show_bug.cgi?id=724518
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Sebastian Rasmussen [Tue, 15 Apr 2014 23:50:16 +0000 (01:50 +0200)]
curl*sink: report errors from curl when setting options
https://bugzilla.gnome.org/show_bug.cgi?id=728960
Sebastian Rasmussen [Tue, 15 Apr 2014 21:53:32 +0000 (23:53 +0200)]
curl*sink: post error on bus in element, not transfer thread
https://bugzilla.gnome.org/show_bug.cgi?id=728960
Sebastian Rasmussen [Tue, 22 Apr 2014 20:26:32 +0000 (22:26 +0200)]
curlhttpsink: allow for unconditionally disabling proxying
Previously if the proxy server hostname was the empty string
curlhttpsink would never even set the libcurl option. For libcurl
however, having a proxy server hostname be the empty string means that
proxying should be disabled even if environment variables might be set.
Now with the restriction lifted, doing this is allowed.
https://bugzilla.gnome.org/show_bug.cgi?id=728960
Sebastian Rasmussen [Tue, 22 Apr 2014 20:26:56 +0000 (22:26 +0200)]
curl*sink: improve return value checks in test cases
https://bugzilla.gnome.org/show_bug.cgi?id=728960
Sebastian Rasmussen [Tue, 22 Apr 2014 20:26:12 +0000 (22:26 +0200)]
curl*sink: fix typos
https://bugzilla.gnome.org/show_bug.cgi?id=728960
Sebastian Rasmussen [Tue, 15 Apr 2014 23:50:03 +0000 (01:50 +0200)]
curl*sink: fix some gst-indent problems
https://bugzilla.gnome.org/show_bug.cgi?id=728960
Luis de Bethencourt [Fri, 25 Apr 2014 20:18:07 +0000 (16:18 -0400)]
gl: check the correct GstGLMemory in basic_test
Sebastian Dröge [Fri, 25 Apr 2014 15:40:56 +0000 (17:40 +0200)]
mpegtsmux: Only require alignment and stream-format for h264, parsed is implicit
Sebastian Dröge [Fri, 25 Apr 2014 12:41:27 +0000 (14:41 +0200)]
uridownloader: Set source state to NULL if downloading failed for whatever reason
Nicolas Dufresne [Thu, 24 Apr 2014 17:59:35 +0000 (13:59 -0400)]
gl/x11: Removed unused variable
Sebastian Dröge [Thu, 24 Apr 2014 16:33:03 +0000 (18:33 +0200)]
gl/x11: Get rid of unneeded second display connection and do everything from the main loop
Sebastian Dröge [Thu, 24 Apr 2014 16:28:34 +0000 (18:28 +0200)]
gl/x11: Block rendering until swapbuffers is called and don't go via X11 events as unneeded indirection
This should fix QoS problems, where basesink believed it was rendering with
20FPS but actually we were just queueing up X11 Expose events and only once
in a while something was rendered.
Julien Isorce [Thu, 24 Apr 2014 15:05:32 +0000 (16:05 +0100)]
gl: fails glimagesink when shader compilation went wrong
Those shaders are fixed and very simple so it should not fail
but it's worth to handle a such case.
Julien Isorce [Thu, 24 Apr 2014 14:36:47 +0000 (15:36 +0100)]
gl: call glClearColor before glClear
Josep Torra [Thu, 24 Apr 2014 14:33:56 +0000 (16:33 +0200)]
pkgconfig: fix gstreamer-gl uninstalled
Ensure to provide libgstgl also in the uninstalled setup.
Fixes build of gst-omx for RPI in uninstalled setup.
Julien Isorce [Thu, 24 Apr 2014 14:17:41 +0000 (15:17 +0100)]
gl/rpi: do not scale to full screen
Having a 640x360 movie being scaled to 1900x1200 does not look nice
Julien Isorce [Thu, 24 Apr 2014 13:50:57 +0000 (14:50 +0100)]
gl/rpi: change dispmanx attributes of existing element instead of creating a new one
I was lucky that:
e1 = vc_dispmanx_element_add ()
eglCreateWindowSurface (e1)
vc_dispmanx_element_remove (e1)
e2 = vc_dispmanx_element_add ()
resulted in having e2 equal to e1. And also having the egl surface
that does not allocate its buffers before the first draw.
Julien Isorce [Thu, 24 Apr 2014 13:38:40 +0000 (14:38 +0100)]
gl/rpi: ensure the dispmanx element to be opaque
So that we ensure it does not get alpha composited with other
dispmanx elements like the desktop.
Andoni Morales Alastruey [Fri, 18 Apr 2014 18:04:25 +0000 (20:04 +0200)]
avfassetsrc: downgrade rank to SECONDARY in OS X
Andoni Morales Alastruey [Fri, 18 Apr 2014 18:03:48 +0000 (20:03 +0200)]
avfassetsrc: rename references to iOS
Matthieu Bouron [Mon, 14 Apr 2014 18:08:01 +0000 (19:08 +0100)]
iosavassetsrc: rename element to avfassetsrc
https://bugzilla.gnome.org/show_bug.cgi?id=728249
Matthieu Bouron [Thu, 3 Apr 2014 13:02:18 +0000 (14:02 +0100)]
iosavassetsrc: Port to 1.0
Also enables this element on OSX >= 10.7.
https://bugzilla.gnome.org/show_bug.cgi?id=728249
Andoni Morales Alastruey [Sat, 11 May 2013 01:41:36 +0000 (03:41 +0200)]
applemedia: add new source/decoder element for iOS assets
https://bugzilla.gnome.org/show_bug.cgi?id=728249
Matthieu Bouron [Wed, 9 Apr 2014 09:55:03 +0000 (10:55 +0100)]
coremediabuffer: handle stride alignment
Handle stride alignment through the use of the video meta API. The
code is based on the corevideobuffer implementation.
If the video meta API is not supported and the underlying buffer
contains padding, the core media buffer is copied to a system memory
buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=727885
Matthieu Bouron [Wed, 9 Apr 2014 10:47:12 +0000 (11:47 +0100)]
avfvideosrc: check if downstream supports the video meta API
Check if downstream supports the video meta API, so we can use it later
with the core media buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=727953
Julien Isorce [Thu, 24 Apr 2014 09:37:00 +0000 (10:37 +0100)]
gl/cocoa: pass a NSView to set_window_handle instead of a NSWindow
Fix backwards compatibility
https://bugzilla.gnome.org/show_bug.cgi?id=728451
Julien Isorce [Thu, 24 Apr 2014 08:03:32 +0000 (09:03 +0100)]
gl/cocoa: only draw once the window has been resized
It avoids to draw the first frame with an incorrect view port.
Julien Isorce [Thu, 24 Apr 2014 07:49:54 +0000 (08:49 +0100)]
gl/cocoa: set the view to use for drawing by the context
It avoids to draw to an invalid buffer.
Withtout this the default frame buffer is undefined:
glBindFramebuffer (GL_FRAMEBUFFER, 0)
Visually you could see some white frames at the beginning
when lunching videotestsrc ! glimagesink
With OpenGL Profiler from XCode you could see some
GL_INVALID_FRAMEBUFFER_OPERATION for the first frames
Julien Isorce [Wed, 23 Apr 2014 13:41:21 +0000 (14:41 +0100)]
gl: fix declaration-definition mismatch for _init_upload
Julien Isorce [Wed, 23 Apr 2014 12:34:12 +0000 (13:34 +0100)]
gl/bufferpool: do not reset upload when set_config does not change the caps
With videotestsrc ! glimagesink it was reset 3 times
Julien Isorce [Wed, 23 Apr 2014 12:30:27 +0000 (13:30 +0100)]
gl: use #ifdef instead of #if for __APPLE__
warning: "__APPLE__" is not defined [-Wundef]
with gcc version 4.7.2
20120731 (prerelease)
(crosstool-NG linaro-1.13.1+bzr2458 - Linaro GCC 2012.08)
Nicolas Dufresne [Wed, 23 Apr 2014 16:42:32 +0000 (12:42 -0400)]
glmemory: User g_slice_new0 to ensure fully initilized structure
The pbo pointer not being initialized would trigger a use of unitilialized variable
in valgrind.
Nicolas Dufresne [Sat, 29 Mar 2014 22:34:26 +0000 (18:34 -0400)]
decklink: Fix support for HW without output
Devices suitable for decklinksrc may not have any output, hence querying
the input returns NULL. Add support for all cases where
input/output/config may be missing.
https://bugzilla.gnome.org/show_bug.cgi?id=727306
Nicolas Dufresne [Sat, 15 Mar 2014 14:17:43 +0000 (15:17 +0100)]
y4mdec: check for VIDEO meta instead of CROP meta
This element only need stride support, but checks for CROP_META, which
is a bit too much, even though this works as CROP imply having VIDEO
meta.
https://bugzilla.gnome.org/show_bug.cgi?id=726255
Sebastian Dröge [Wed, 23 Apr 2014 09:10:28 +0000 (11:10 +0200)]
glimagesink: Use the pixel-aspect-ratio adjusted width/height when centering the frame in the display area
Makes sure we actually keep the display aspect ratio
Sebastian Dröge [Wed, 23 Apr 2014 08:55:38 +0000 (10:55 +0200)]
glimagesink: By default keep the display aspect ratio
Also the default for the pixel-aspect-ratio should be 1/1, not 0/1.
Edward Hervey [Wed, 23 Apr 2014 08:42:45 +0000 (10:42 +0200)]
mpegpsdemux: Flush program end code bytes
This should not harm regular files, since those are the last 4 bytes of
a normal file.
This allows to handle playback of concatenated mpeg-ps files. Seeking and
duration reporting is still wrong though.
Sebastian Dröge [Wed, 23 Apr 2014 08:27:23 +0000 (10:27 +0200)]
gltestsrc: Unref context when creation failed and guard against that in fill()
Sebastian Dröge [Wed, 23 Apr 2014 08:24:55 +0000 (10:24 +0200)]
glimagesink: Call gst_object_unref() on the GstGL GObjects again
While they're plain GObjects it does not hurt to call gst_object_unref()
on them and potentially allows to debug reference leaks a bit easier.
Sebastian Dröge [Wed, 23 Apr 2014 08:00:48 +0000 (10:00 +0200)]
glimagesink: If creating a context or upload failed, destroy it
Fixes deadlocks in error cases when later code assumes the broken
context is actually usable.
https://bugzilla.gnome.org/show_bug.cgi?id=728761
Sebastian Dröge [Tue, 22 Apr 2014 10:56:54 +0000 (12:56 +0200)]
mpegtspacketizer: Remove dead code and simplify if statement
CID 1204274
Vincent Penquerc'h [Mon, 21 Apr 2014 12:15:34 +0000 (13:15 +0100)]
mxf: fix MP2 case
Testing mpegversion when mpegaudioversion was likely meant.
Similar tests in sys/androidmedia/gstamcaudiodec.c also test
mpegaudioversion with the same conditional code.
Coverity 206071
Vincent Penquerc'h [Mon, 21 Apr 2014 09:36:55 +0000 (10:36 +0100)]
vc1parse: guard against dividing by zero
If framerate is unknown, we write the maximum framerate
allowed for this profile/level:
https://tools.ietf.org/html/draft-ietf-avt-rtp-vc1-06#section-6.1
http://wiki.multimedia.cx/index.php?title=VC-1#Setup_Data_.2F_Sequence_Layer
Coverity 1139694
Vincent Penquerc'h [Mon, 21 Apr 2014 09:07:06 +0000 (10:07 +0100)]
mxfmux: guard against dividing by 0
Use a placeholder value in that case, it's better than crashing.
Coverity 1139697
Vincent Penquerc'h [Mon, 21 Apr 2014 08:51:19 +0000 (09:51 +0100)]
gl: a couple spelling/grammar fixes
Vincent Penquerc'h [Mon, 21 Apr 2014 08:50:19 +0000 (09:50 +0100)]
gl: guard against using a NULL window pointer
Coverity 1195145
Vincent Penquerc'h [Mon, 21 Apr 2014 08:47:08 +0000 (09:47 +0100)]
gl: prevent division by 0 on unsupported texture type
Coverity 1199697
Jan Schmidt [Mon, 21 Apr 2014 12:01:47 +0000 (22:01 +1000)]
glcolorconvert: Fix bt709 conversion matrices.
Fix the sign on one entry in the bt.709 YUV->RGB conversion
matrix, and the corresponding inverse matrix. Fixes really
wrong colouring of some videos.
Vincent Penquerc'h [Thu, 17 Apr 2014 08:58:47 +0000 (09:58 +0100)]
dvbbasebin: fix test for proper use count balancing
usecount is unsigned, so too many "unuse" will wrap the counter
around and the >= 0 check will always be fine.
It would be much simpler to just make the counter signed, but
moving the checks where the decrements happen allow a mistake
to be detected earlier, and thus easier to debug.
Coverity 1139791
Vincent Penquerc'h [Thu, 17 Apr 2014 08:35:37 +0000 (09:35 +0100)]
mxfdemux: guard against NULL non source components
This component is dereferenced, and later code checking for
NULL in particular cases implies it can be NULL. This likely
does not fix the coverity warning as it was seeing another
path setting component to NULL explicitely, but this was
spotted by looking at:
Coverity 1139736
Which is actually OK from what I can see since the actual
dereference of the explicit NULL pointer will not happen
if the condition that led to the NULL pointer assignment
is met, since the assignment and defeference have mutually
exclusive tests.
Vincent Penquerc'h [Thu, 17 Apr 2014 08:26:20 +0000 (09:26 +0100)]
rawparse: catch errors in caps manipulation
Coverity 1139622
Andoni Morales Alastruey [Fri, 18 Apr 2014 18:12:37 +0000 (20:12 +0200)]
vtenc: fix complier error using fixed lenght arrays
Gwenole Beauchesne [Fri, 18 Apr 2014 16:12:36 +0000 (18:12 +0200)]
ivfparse: detect and propagate resolution changes.
Detect resolution changes on key frames, and propagate the resulting
caps to the src pad. Only the uncompressed data chunk is decoded, so
avoid using the new VP8 bitstream parsing library for now.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Gwenole Beauchesne [Fri, 18 Apr 2014 15:34:08 +0000 (17:34 +0200)]
ivfparse: avoid possible division-by-zero when calculating PTS.
Avoid possible division-by-zero while deriving the presentation timestamp
of the buffer. The base class will take care of any interpolation needs.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Halley Zhao [Thu, 24 Oct 2013 23:38:53 +0000 (07:38 +0800)]
ivfparse: enable build.
Drop `ivfparse' element from the non-ported set of plugins in configure.
Gwenole Beauchesne [Tue, 4 Mar 2014 14:46:58 +0000 (15:46 +0100)]
ivfparse: port to baseparse.
https://bugzilla.gnome.org/show_bug.cgi?id=710855
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Zhao, Halley [Fri, 24 Jan 2014 00:37:16 +0000 (08:37 +0800)]
tests: add standalone program for VP8 parser.
Add standalone test application that demonstrates how to use the new
VP8 bitstream parsing library, while also allowing simple debugging/
tracing of IVF files.
[clean-ups, updated to new parser API]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Zhao, Halley [Tue, 7 Jan 2014 18:49:00 +0000 (02:49 +0800)]
tests: add test for VP8 bitstream parsing library.
[updated to new parser API]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Sebastian Dröge [Wed, 9 Apr 2014 07:22:02 +0000 (09:22 +0200)]
codecparsers: vp8: rename dboolhuff symbols.
Rename VP8 dboolhuff symbols so that to avoid clashes with libvpx when
static linking.
Gwenole Beauchesne [Tue, 8 Apr 2014 08:30:09 +0000 (10:30 +0200)]
codecparsers: vp8: add GStreamer native utilities.
Import libvpx 1.3.0 range decoder files (dboolhuff.[ch]) to implement
the VP8 utilities native interface. Likewise, copy and use the default
libvpx generated entropy probabilities tables.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Zhao, Halley [Tue, 7 Jan 2014 18:49:00 +0000 (02:49 +0800)]
codecparsers: add VP8 bitstream parser.
https://bugzilla.gnome.org/show_bug.cgi?id=722760
[refactored, among other fixes]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Edward Hervey [Fri, 18 Apr 2014 14:23:43 +0000 (16:23 +0200)]
mpegtspacketizer: Improve ts_to_offset code
* Search in current pending values first. For CBR streams we can very
easily end up having just one initial observations and then nothing
else (since the bitrate doesn't change).
* Use one group whether we are in that group *OR* if there is only
one group.
* If the group to use isn't closed (points are being accumulated in the
PCROffsetCurrent), use the latest data available for calculation
* If in the unlikelyness that all of this *still* didn't produce more
than one data point, just return the initial offset
Edward Hervey [Fri, 18 Apr 2014 14:20:31 +0000 (16:20 +0200)]
tsdemux: Fix scaling macros
While the calculation done in these macros will work with 64bit
integers, they will fail if working with 32bit integers.
Force the scaling up to solve that.
This amazingly didn't introduce major issues up to now, but resulted
in bogus values in debug logs.
Edward Hervey [Fri, 18 Apr 2014 14:18:01 +0000 (16:18 +0200)]
mpegtsbase: Don't hard-flush the packetizer on discont buffers
Doing a hard flush on the packetizer will drop all observations, which
will eventually break push-based seeking (with BYTES segment) since
we won't know where to seek to anymore (new data would always be
considered as the beginning of the stream).
Edward Hervey [Wed, 16 Apr 2014 14:25:29 +0000 (16:25 +0200)]
mxfdemux: Fix copy/paste error
We want to check whether the rate is different. We check changes in
numerator *and* denominator.
CID #1139631
CID #1139642
Edward Hervey [Wed, 16 Apr 2014 14:19:47 +0000 (16:19 +0200)]
mxf: Handle fraction parsing failure
And properly cleanup/reset the segment before returning on errors
CID #206012
Edward Hervey [Wed, 16 Apr 2014 14:12:02 +0000 (16:12 +0200)]
mxf: Remove useless check
a guint will always smaller or equal to the maximum value it can
contain
CID #206049
Vincent Penquerc'h [Wed, 9 Apr 2014 11:27:16 +0000 (12:27 +0100)]
mxf: avoid dereferencing NULL mapping data pointer
Also unref buffers on error, as it seems to be done in one, but
not all, error paths.
The NULL pointer part is Coverity 206112
https://bugzilla.gnome.org/show_bug.cgi?id=727889
Edward Hervey [Wed, 16 Apr 2014 14:07:17 +0000 (16:07 +0200)]
dvb: Fix if() check
introduced by my previous commit :(
Edward Hervey [Wed, 16 Apr 2014 13:43:06 +0000 (15:43 +0200)]
configure: Detect EGL header presence
Fixes the build for Android, and I suspect for other systems too...
Edward Hervey [Wed, 16 Apr 2014 13:37:57 +0000 (15:37 +0200)]
dvb/camsession: Don't do operations on unexisting sessions
CID #206114
Edward Hervey [Wed, 16 Apr 2014 13:32:32 +0000 (15:32 +0200)]
dvb: Handle socket() failure
CID #206178
Edward Hervey [Wed, 16 Apr 2014 13:23:57 +0000 (15:23 +0200)]
dvbsrc: Handle failure to get statistics from the device
Check the ioctl return value and don't output bogus values.
CID #206016
Edward Hervey [Wed, 16 Apr 2014 13:18:44 +0000 (15:18 +0200)]
dvbsrc: Don't close a fd that wasn't open
We are handling the failure cases in this block where the open failed
CID #206179
Edward Hervey [Wed, 16 Apr 2014 13:17:03 +0000 (15:17 +0200)]
dvbsrc: Don't try to access NULL string
And refactor the pid setting code to be in its own function for clarity
CID #206374
Stefan Ringel [Thu, 10 Apr 2014 14:04:21 +0000 (16:04 +0200)]
mpegts: add dvb ca identifier descriptor
https://bugzilla.gnome.org/show_bug.cgi?id=727560
Stefan Ringel [Thu, 10 Apr 2014 14:03:07 +0000 (16:03 +0200)]
mpegts: add scrambling descriptor
https://bugzilla.gnome.org/show_bug.cgi?id=727560
Stefan Ringel [Thu, 10 Apr 2014 14:02:09 +0000 (16:02 +0200)]
mpegts: add frequency list descriptor
https://bugzilla.gnome.org/show_bug.cgi?id=727560
Stefan Ringel [Thu, 10 Apr 2014 14:00:50 +0000 (16:00 +0200)]
mpegts: add data broadcast id descriptor
https://bugzilla.gnome.org/show_bug.cgi?id=727403
Stefan Ringel [Thu, 10 Apr 2014 13:59:50 +0000 (15:59 +0200)]
mpegts: add private data specifier descriptor
https://bugzilla.gnome.org/show_bug.cgi?id=727403
Sebastian Dröge [Wed, 16 Apr 2014 07:20:37 +0000 (09:20 +0200)]
dvb: Minor code style fix
Stefan Ringel [Thu, 10 Apr 2014 13:58:55 +0000 (15:58 +0200)]
mpegts: add parential rating descriptor
https://bugzilla.gnome.org/show_bug.cgi?id=727403
Stefan Ringel [Thu, 10 Apr 2014 13:58:04 +0000 (15:58 +0200)]
mpegts: add linkage descriptor
https://bugzilla.gnome.org/show_bug.cgi?id=727403
Tim-Philipp Müller [Tue, 15 Apr 2014 23:25:51 +0000 (00:25 +0100)]
mpegts: for loop initial declarations are only allowed in C99 mode
Fixes compiler warnings.
Sebastian Dröge [Tue, 15 Apr 2014 18:47:55 +0000 (20:47 +0200)]
egl: Add libgstegl and eglgles plugin to the CRUFT directories
Julien Isorce [Tue, 15 Apr 2014 16:58:34 +0000 (17:58 +0100)]
egl/eglglessink: remove since EGLImage and iOS support have been added in glimagesink
https://bugzilla.gnome.org/show_bug.cgi?id=703343
Julien Isorce [Mon, 24 Mar 2014 12:08:43 +0000 (12:08 +0000)]
gl: allow to include GLES/gl.h
https://bugzilla.gnome.org/show_bug.cgi?id=703343
Edward Hervey [Mon, 14 Apr 2014 05:56:16 +0000 (07:56 +0200)]
wayland: Remove dead assignment
We set it just after variable declaration
CID #1197709
Sebastian Dröge [Sun, 13 Apr 2014 17:20:32 +0000 (19:20 +0200)]
gl/eagl: Fix compilation
Sebastian Dröge [Sun, 13 Apr 2014 14:53:58 +0000 (16:53 +0200)]
gl/eagl: Notify the window's resize callback about surface dimension changes
https://bugzilla.gnome.org/show_bug.cgi?id=728107
Sebastian Dröge [Sun, 13 Apr 2014 14:46:11 +0000 (16:46 +0200)]
gl/eagl: Remove spurious private struct pointer
Sebastian Dröge [Sun, 13 Apr 2014 14:40:58 +0000 (16:40 +0200)]
gl/android: Notify the window's resize callback about surface dimension changes
https://bugzilla.gnome.org/show_bug.cgi?id=728107
Matthew Waters [Sun, 13 Apr 2014 12:16:45 +0000 (22:16 +1000)]
glimagesink: remove unused texture
Matthew Waters [Sun, 13 Apr 2014 12:14:52 +0000 (22:14 +1000)]
glimagesink: move upload into _prepare()
Matthew Waters [Sun, 13 Apr 2014 03:49:22 +0000 (13:49 +1000)]
gl/context: output available extensions
Matthew Waters [Sun, 13 Apr 2014 03:39:14 +0000 (13:39 +1000)]
gl/context: provide get_gl_version
Julien Isorce [Sat, 12 Apr 2014 23:21:00 +0000 (00:21 +0100)]
gl/color: restore viewport dimensions when fbo done
Regression introduced by
95abfda1399bcddbee345d4542e857d743965477.
It caused to display the wrong frame size when resizing the window.
Sebastian Dröge [Sat, 12 Apr 2014 20:45:30 +0000 (22:45 +0200)]
gl: Import QuartzCore/QuartzCore.h for CAEAGLLayer on older iOS versions