sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b

[ Upstream commit f282df0391267fb2b263da1cc3233aa6fb81defc ]

Normally SCTP_MIB_CURRESTAB is always incremented once asoc enter into
ESTABLISHED from the state < ESTABLISHED and decremented when the asoc
is being deleted.

However, in sctp_sf_do_dupcook_b(), the asoc's state can be changed to
ESTABLISHED from the state >= ESTABLISHED where it shouldn't increment
SCTP_MIB_CURRESTAB. Otherwise, one asoc may increment MIB_CURRESTAB
multiple times but only decrement once at the end.

I was able to reproduce it by using scapy to do the 4-way shakehands,
after that I replayed the COOKIE-ECHO chunk with 'peer_vtag' field
changed to different values, and SCTP_MIB_CURRESTAB was incremented
multiple times and never went back to 0 even when the asoc was freed.

This patch is to fix it by only incrementing SCTP_MIB_CURRESTAB when
the state < ESTABLISHED in sctp_sf_do_dupcook_b().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ethernet:enic: Fix a use after free bug in enic_hard_start_xmit

[ Upstream commit 643001b47adc844ae33510c4bb93c236667008a3 ]

In enic_hard_start_xmit, it calls enic_queue_wq_skb(). Inside
enic_queue_wq_skb, if some error happens, the skb will be freed
by dev_kfree_skb(skb). But the freed skb is still used in
skb_tx_timestamp(skb).

My patch makes enic_queue_wq_skb() return error and goto spin_unlock()
incase of error. The solution is provided by Govind.
See https://lkml.org/lkml/2021/4/30/961.

Fixes: fb7516d42478e ("enic: add sw timestamp support")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Acked-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block/rnbd-clt: Check the return value of the function rtrs_clt_query

[ Upstream commit 1056ad829ec43f9b705b507c2093b05e2088b0b7 ]

In case none of the paths are in connected state, the function
rtrs_clt_query returns an error. In such a case, error out since the
values in the rtrs_attrs structure would be garbage.

Fixes: f7a7a5c228d45 ("block/rnbd: client: main functionality")
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Guoqing Jiang <guoqing.jiang@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Link: https://lore.kernel.org/r/20210428061359.206794-4-gi-oh.kim@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block/rnbd-clt: Change queue_depth type in rnbd_clt_session to size_t

[ Upstream commit 80d43cbd46155744ee450d2476ee4fcf2917ae9b ]

The member queue_depth in the structure rnbd_clt_session is read from the
rtrs client side using the function rtrs_clt_query, which in turn is read
from the rtrs_clt structure. It should really be of type size_t.

Fixes: 90426e89f54db ("block/rnbd: client: private header with client structs and functions")
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Guoqing Jiang <guoqing.jiang@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Link: https://lore.kernel.org/r/20210428061359.206794-2-gi-oh.kim@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix signed overflow in ringbuf_process_ring

[ Upstream commit 2a30f9440640c418bcfbea9b2b344d268b58e0a2 ]

One of our benchmarks running in (Google-internal) CI pushes data
through the ringbuf faster htan than userspace is able to consume
it. In this case it seems we're actually able to get >INT_MAX entries
in a single ring_buffer__consume() call. ASAN detected that cnt
overflows in this case.

Fix by using 64-bit counter internally and then capping the result to
INT_MAX before converting to the int return type. Do the same for
the ring_buffer__poll().

Fixes: bf99c936f947 (libbpf: Add BPF ring buffer support)
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210429130510.1621665-1-jackmanb@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sunrpc: Fix misplaced barrier in call_decode

[ Upstream commit f8f7e0fb22b2e75be55f2f0c13e229e75b0eac07 ]

Fix a misplaced barrier in call_decode. The struct rpc_rqst is modified
as follows by xprt_complete_rqst:

req->rq_private_buf.len = copied;
/* Ensure all writes are done before we update */
/* req->rq_reply_bytes_recvd */
smp_wmb();
req->rq_reply_bytes_recvd = copied;

And currently read as follows by call_decode:

smp_rmb(); // misplaced
if (!req->rq_reply_bytes_recvd)
   goto out;
req->rq_rcv_buf.len = req->rq_private_buf.len;

This patch places the smp_rmb after the if to ensure that
rq_reply_bytes_recvd and rq_private_buf.len are read in order.

Fixes: 9ba828861c56a ("SUNRPC: Don't try to parse incomplete RPC messages")
Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RISC-V: Fix error code returned by riscv_hartid_to_cpuid()

[ Upstream commit 533b4f3a789d49574e7ae0f6ececed153f651f97 ]

We should return a negative error code upon failure in
riscv_hartid_to_cpuid() instead of NR_CPUS. This is also
aligned with all uses of riscv_hartid_to_cpuid() which
expect negative error code upon failure.

Fixes: 6825c7a80f18 ("RISC-V: Add logical CPU indexing for RISC-V")
Fixes: f99fb607fb2b ("RISC-V: Use Linux logical CPU number instead of hartid")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: do asoc update earlier in sctp_sf_do_dupcook_a

[ Upstream commit 35b4f24415c854cd718ccdf38dbea6297f010aae ]

There's a panic that occurs in a few of envs, the call trace is as below:

  [] general protection fault, ... 0x29acd70f1000a: 0000 [#1] SMP PTI
  [] RIP: 0010:sctp_ulpevent_notify_peer_addr_change+0x4b/0x1fa [sctp]
  []  sctp_assoc_control_transport+0x1b9/0x210 [sctp]
  []  sctp_do_8_2_transport_strike.isra.16+0x15c/0x220 [sctp]
  []  sctp_cmd_interpreter.isra.21+0x1231/0x1a10 [sctp]
  []  sctp_do_sm+0xc3/0x2a0 [sctp]
  []  sctp_generate_timeout_event+0x81/0xf0 [sctp]

This is caused by a transport use-after-free issue. When processing a
duplicate COOKIE-ECHO chunk in sctp_sf_do_dupcook_a(), both COOKIE-ACK
and SHUTDOWN chunks are allocated with the transort from the new asoc.
However, later in the sideeffect machine, the old asoc is used to send
them out and old asoc's shutdown_last_sent_to is set to the transport
that SHUTDOWN chunk attached to in sctp_cmd_setup_t2(), which actually
belongs to the new asoc. After the new_asoc is freed and the old asoc
T2 timeout, the old asoc's shutdown_last_sent_to that is already freed
would be accessed in sctp_sf_t2_timer_expire().

Thanks Alexander and Jere for helping dig into this issue.

To fix it, this patch is to do the asoc update first, then allocate
the COOKIE-ACK and SHUTDOWN chunks with the 'updated' old asoc. This
would make more sense, as a chunk from an asoc shouldn't be sent out
with another asoc. We had fixed quite a few issues caused by this.

Fixes: 145cb2f7177d ("sctp: Fix bundling of SHUTDOWN with COOKIE-ACK")
Reported-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Reported-by: syzbot+bbe538efd1046586f587@syzkaller.appspotmail.com
Reported-by: Michal Tesar <mtesar@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: disable phy loopback setting in hclge_mac_start_phy

[ Upstream commit 472497d0bdae890a896013332a0b673f9acdf2bf ]

If selftest and reset are performed at the same time, the phy
loopback setting may be still in enable state after the reset,
and device cannot link up. So fix this issue by disabling phy
loopback before phy_start().

Fixes: 256727da7395 ("net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: use netif_tx_disable to stop the transmit queue

[ Upstream commit b416e872be06fdace3c36cf5210130509d0f0e72 ]

Currently, netif_tx_stop_all_queues() is used to ensure that
the xmit is not running, but for the concurrent case it will
not take effect, since netif_tx_stop_all_queues() just sets
a flag without locking to indicate that the xmit queue(s)
should not be run.

So use netif_tx_disable() to replace netif_tx_stop_all_queues(),
it takes the xmit queue lock while marking the queue stopped.

Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix for vxlan gpe tx checksum bug

[ Upstream commit 905416f18fe74bdd4de91bf94ef5a790a36e4b99 ]

When skb->ip_summed is CHECKSUM_PARTIAL, for non-tunnel udp packet,
which has a dest port as the IANA assigned, the hardware is expected
to do the checksum offload, but the hardware whose version is below
V3 will not do the checksum offload when udp dest port is 4790.

So fixes it by doing the checksum in software for this case.

Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: add check for HNS3_NIC_STATE_INITED in hns3_reset_notify_up_enet()

[ Upstream commit b4047aac4ec1066bab6c71950623746d7bcf7154 ]

In some cases, the device is not initialized because reset failed.
If another task calls hns3_reset_notify_up_enet() before reset
retry, it will cause an error since uninitialized pointer access.
So add check for HNS3_NIC_STATE_INITED before calling
hns3_nic_net_open() in hns3_reset_notify_up_enet().

Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: initialize the message content in hclge_get_link_mode()

[ Upstream commit 568a54bdf70b143f3e0befa298e22ad469ffc732 ]

The message sent to VF should be initialized, otherwise random
value of some contents may cause improper processing by the target.
So add a initialization to message in hclge_get_link_mode().

Fixes: 9194d18b0577 ("net: hns3: fix the problem that the supported port is empty")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix incorrect configuration for igu_egu_hw_err

[ Upstream commit 2867298dd49ee84214b8721521dc7a5a6382520c ]

According to the UM, the type and enable status of igu_egu_hw_err
should be configured separately. Currently, the type field is
incorrect when disable this error. So fix it by configuring these
two fields separately.

Fixes: bf1faf9415dd ("net: hns3: Add enable and process hw errors from IGU, EGU and NCSI")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: ds1307: Fix wday settings for rx8130

[ Upstream commit 204756f016726a380bafe619438ed979088bd04a ]

rx8130 wday specifies the bit position, not BCD.

Fixes: ee0981be7704 ("rtc: ds1307: Add support for Epson RX8130CE")
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210420023917.1949066-1-nobuhiro1.iwamatsu@toshiba.co.jp
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: Narrow down fast path in system suspend path

[ Upstream commit ce4f62f9dd8cf43ac044045ed598a0b80ef33890 ]

If spm_lvl is set to 0 or 1, when system suspend kicks start and HBA is
runtime active, system suspend may just bail without doing anything (the
fast path), leaving other contexts still running, e.g., clock gating and
clock scaling. When system resume kicks start, concurrency can happen
between ufshcd_resume() and these contexts, leading to various stability
issues.

Add a check against HBA's runtime state and allowing fast path only if HBA
is runtime suspended, otherwise let system suspend go ahead call
ufshcd_suspend(). This will guarantee that these contexts are stopped by
either runtime suspend or system suspend.

Link: https://lore.kernel.org/r/1619408921-30426-4-git-send-email-cang@codeaurora.org
Fixes: 0b257734344a ("scsi: ufs: optimize system suspend handling")
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspend

[ Upstream commit 637822e63b79ee8a729f7ba2645a26cf5a524ee4 ]

During ufs system suspend, leaving rpm_dev_flush_recheck_work running or
pending is risky because concurrency may happen between system
suspend/resume and runtime resume routine. Fix this by cancelling
rpm_dev_flush_recheck_work synchronously during system suspend.

Link: https://lore.kernel.org/r/1619408921-30426-3-git-send-email-cang@codeaurora.org
Fixes: 51dd905bd2f6 ("scsi: ufs: Fix WriteBooster flush during runtime suspend")
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: Do not put UFS power into LPM if link is broken

[ Upstream commit 23043dd87b153d02eaf676e752d32429be5e5126 ]

During resume, if link is broken due to AH8 failure, make sure
ufshcd_resume() does not put UFS power back into LPM.

Link: https://lore.kernel.org/r/1619408921-30426-2-git-send-email-cang@codeaurora.org
Fixes: 4db7a2360597 ("scsi: ufs: Fix concurrency of error handler and other error recovery paths")
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Prevent PRLI in target mode

[ Upstream commit fcb16d9a8ecf1e9bfced0fc654ea4e2caa7517f4 ]

In a case when the initiator in P2P mode by some circumstances does not
send PRLI, the target, in a case when the target port's WWPN is less than
initiator's, changes the discovery state in DSC_GNL. When gnl completes it
sends PRLI to the initiator.

Usually the initiator in P2P mode always sends PRLI. We caught this issue
on Linux stable v5.4.6 https://www.spinics.net/lists/stable/msg458515.html.

Fix this particular corner case in the behaviour of the P2P mod target
login state machine.

Link: https://lore.kernel.org/r/20210422153414.4022-1-a.kovaleva@yadro.com
Fixes: a9ed06d4e640 ("scsi: qla2xxx: Allow PLOGI in target mode")
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: fix inode leak on getattr error in __fh_to_dentry

[ Upstream commit 1775c7ddacfcea29051c67409087578f8f4d751b ]

Fixes: 878dabb64117 ("ceph: don't return -ESTALE if there's still an open file")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

swiotlb: Fix the type of index

[ Upstream commit 95b079d8215b83b37fa59341fda92fcb9392f14a ]

Fix the type of index from unsigned int to int since find_slots() might
return -1.

Fixes: 26a7e094783d ("swiotlb: refactor swiotlb_tbl_map_single")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xprtrdma: rpcrdma_mr_pop() already does list_del_init()

[ Upstream commit 1363e6388c363d0433f9aa4e2f33efe047572687 ]

The rpcrdma_mr_pop() earlier in the function has already cleared
out mr_list, so it must not be done again in the error path.

Fixes: 847568942f93 ("xprtrdma: Remove fr_state")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xprtrdma: Fix cwnd update ordering

[ Upstream commit 35d8b10a25884050bb3b0149b62c3818ec59f77c ]

After a reconnect, the reply handler is opening the cwnd (and thus
enabling more RPC Calls to be sent) /before/ rpcrdma_post_recvs()
can post enough Receive WRs to receive their replies. This causes an
RNR and the new connection is lost immediately.

The race is most clearly exposed when KASAN and disconnect injection
are enabled. This slows down rpcrdma_rep_create() enough to allow
the send side to post a bunch of RPC Calls before the Receive
completion handler can invoke ib_post_recv().

Fixes: 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xprtrdma: Avoid Receive Queue wrapping

[ Upstream commit 32e6b68167f1d446111c973d57e6f52aee11897a ]

Commit e340c2d6ef2a ("xprtrdma: Reduce the doorbell rate (Receive)")
increased the number of Receive WRs that are posted by the client,
but did not increase the size of the Receive Queue allocated during
transport set-up.

This is usually not an issue because RPCRDMA_BACKWARD_WRS is defined
as (32) when SUNRPC_BACKCHANNEL is defined. In cases where it isn't,
there is a real risk of Receive Queue wrapping.

Fixes: e340c2d6ef2a ("xprtrdma: Reduce the doorbell rate (Receive)")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: atmel: Fix duty cycle calculation in .get_state()

[ Upstream commit 453e8b3d8e36ddcb283b3d1698864a03ea45599a ]

The CDTY register contains the number of inactive cycles. .apply() does
this correctly, however .get_state() got this wrong.

Fixes: 651b510a74d4 ("pwm: atmel: Implement .get_state()")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: fix ternary sign expansion bug in tracing

[ Upstream commit cb579086536f6564f5846f89808ec394ef8b8621 ]

This code is supposed to pass negative "err" values for tracing but it
passes positive values instead.  The problem is that the
trace_svcsock_tcp_send() function takes a long but "err" is an int and
"sent" is a u32.  The negative is first type promoted to u32 so it
becomes a high positive then it is promoted to long and it stays
positive.

Fix this by casting "err" directly to long.

Fixes: 998024dee197 ("SUNRPC: Add more svcsock tracepoints")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: fix cdev setup and free device lifetime issues

[ Upstream commit 04922b7445a1950b86f130a1fe8c52cc27b3e30b ]

The char device setup and cleanup has device lifetime issues regarding when
parts are initialized and cleaned up. The initialization of struct device is
done incorrectly. device_initialize() needs to be called on the 'struct
device' and then additional changes can be added. The ->release() function
needs to be setup via device_type before dev_set_name() to allow proper
cleanup. The change re-parents the cdev under the wq->conf_dev to get
natural reference inheritance. No known dependency on the old device path exists.

Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes: 42d279f9137a ("dmaengine: idxd: add char driver to expose submission portal to userland")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/161852987721.2203940.1478218825576630810.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: fix dma device lifetime

[ Upstream commit 397862855619271296e46d10f7dfa7bafe71eb81 ]

The devm managed lifetime is incompatible with 'struct device' objects that
resides in idxd context. This is one of the series that clean up the idxd
driver 'struct device' lifetime. Remove embedding of dma_device and dma_chan
in idxd since it's not the only interface that idxd will use. The freeing of
the dma_device will be managed by the ->release() function.

Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/161852983001.2203940.14817017492384561719.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: Fix potential null dereference on pointer status

[ Upstream commit 28ac8e03c43dfc6a703aa420d18222540b801120 ]

There are calls to idxd_cmd_exec that pass a null status pointer however
a recent commit has added an assignment to *status that can end up
with a null pointer dereference.  The function expects a null status
pointer sometimes as there is a later assignment to *status where
status is first null checked.  Fix the issue by null checking status
before making the assignment.

Addresses-Coverity: ("Explicit null dereferenced")
Fixes: 89e3becd8f82 ("dmaengine: idxd: check device state before issue command")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20210415110654.1941580-1-colin.king@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: fsl-ftm-alarm: add MODULE_TABLE()

[ Upstream commit 7fcb86185978661c9188397d474f90364745b8d9 ]

The module doesn't load automatically. Fix it by adding the missing
MODULE_TABLE().

Fixes: 7b0b551dbc1e ("rtc: fsl-ftm-alarm: add FTM alarm driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210414084006.17933-1-michael@walle.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: ensure new clients break delegations

[ Upstream commit 217fd6f625af591e2866bebb8cda778cf85bea2e ]

If nfsd already has an open file that it plans to use for IO from
another, it may not need to do another vfs open, but it still may need
to break any delegations in case the existing opens are for another
client.

Symptoms are that we may incorrectly fail to break a delegation on a
write open from a different client, when the delegation-holding client
already has a write open.

Fixes: 28df3d1539de ("nfsd: clients don't need to break their own delegations")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.x: Don't return NFS4ERR_NOMATCHING_LAYOUT if we're unmounting

[ Upstream commit 8926cc8302819be9e67f70409ed001ecb2c924a9 ]

If the NFS super block is being unmounted, then we currently may end up
telling the server that we've forgotten the layout while it is actually
still in use by the client.
In that case, just assume that the client will soon return the layout
anyway, and so return NFS4ERR_DELAY in response to the layout recall.

Fixes: 58ac3e59235f ("NFSv4/pnfs: Clean up nfs_layout_find_inode()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/drivers/tsens: Fix missing put_device error

[ Upstream commit f4136863e8899fa0554343201b78b9e197c78a78 ]

Fixes coccicheck error:

drivers/thermal/qcom/tsens.c:759:4-10: ERROR: missing put_device; call
of_find_device_by_node on line 715, but without a corresponding object
release within this function.

Fixes: a7ff82976122 ("drivers: thermal: tsens: Merge tsens-common.c into tsens.c")
Signed-off-by: Guangqing Zhu <zhuguangqing83@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210404125431.12208-1-zhuguangqing83@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Handle major timeout in xprt_adjust_timeout()

[ Upstream commit 09252177d5f924f404551b4b4eded5daa7f04a3a ]

Currently if a major timeout value is reached, but the minor value has
not been reached, an ETIMEOUT will not be sent back to the caller.
This can occur if the v4 server is not responding to requests and
retrans is configured larger than the default of two.

For example, A TCP mount with a configured timeout value of 50 and a
retransmission count of 3 to a v4 server which is not responding:

1. Initial value and increment set to 5s, maxval set to 20s, retries at 3
2. Major timeout is set to 20s, minor timeout set to 5s initially
3. xport_adjust_timeout() is called after 5s, retry with 10s timeout,
   minor timeout is bumped to 10s
4. And again after another 10s, 15s total time with minor timeout set
   to 15s
5. After 20s total time xport_adjust_timeout is called as major timeout is
   reached, but skipped because the minor timeout is not reached
       - After this time the cpu spins continually calling
         xport_adjust_timeout() and returning 0 for 10 seconds.
 As seen on perf sched:
     39243.913182 [0005]  mount.nfs[3794] 4607.938      0.017   9746.863
6. This continues until the 15s minor timeout condition is reached (in
   this case for 10 seconds). After which the ETIMEOUT is processed
   back to the caller, the cpu spinning stops, and normal operations
   continue

Fixes: 7de62bc09fe6 ("SUNRPC dont update timeout value on connection reset")
Signed-off-by: Chris Dion <Christopher.Dion@dell.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Remove trace_xprt_transmit_queued

[ Upstream commit 6cf23783f750634e10daeede48b0f5f5d64ebf3a ]

This tracepoint can crash when dereferencing snd_task because
when some transports connect, they put a cookie in that field
instead of a pointer to an rpc_task.

BUG: KASAN: use-after-free in trace_event_raw_event_xprt_writelock_event+0x141/0x18e [sunrpc]
Read of size 2 at addr ffff8881a83bd3a0 by task git/331872

CPU: 11 PID: 331872 Comm: git Tainted: G S                5.12.0-rc2-00007-g3ab6e585a7f9 #1453
Hardware name: Supermicro SYS-6028R-T/X10DRi, BIOS 1.1a 10/16/2015
Call Trace:
 dump_stack+0x9c/0xcf
 print_address_description.constprop.0+0x18/0x239
 kasan_report+0x174/0x1b0
 trace_event_raw_event_xprt_writelock_event+0x141/0x18e [sunrpc]
 xprt_prepare_transmit+0x8e/0xc1 [sunrpc]
 call_transmit+0x4d/0xc6 [sunrpc]

Fixes: 9ce07ae5eb1d ("SUNRPC: Replace dprintk() call site in xprt_prepare_transmit")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Move fault injection call sites

[ Upstream commit 7638e0bfaed1b653d3ca663e560e9ffb44bb1030 ]

I've hit some crashes that occur in the xprt_rdma_inject_disconnect
path. It appears that, for some provides, rdma_disconnect() can
take so long that the transport can disconnect and release its
hardware resources while rdma_disconnect() is still running,
resulting in a UAF in the provider.

The transport's fault injection method may depend on the stability
of transport data structures. That means it needs to be invoked
only from contexts that hold the transport write lock.

Fixes: 4a0682583988 ("SUNRPC: Transport fault injection")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2 fix handling of sr_eof in SEEK's reply

[ Upstream commit 73f5c88f521a630ea1628beb9c2d48a2e777a419 ]

Currently the client ignores the value of the sr_eof of the SEEK
operation. According to the spec, if the server didn't find the
requested extent and reached the end of the file, the server
would return sr_eof=true. In case the request for DATA and no
data was found (ie in the middle of the hole), then the lseek
expects that ENXIO would be returned.

Fixes: 1c6dcbe5ceff8 ("NFS: Implement SEEK")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pNFS/flexfiles: fix incorrect size check in decode_nfs_fh()

[ Upstream commit ed34695e15aba74f45247f1ee2cf7e09d449f925 ]

We (adam zabrocki, alexander matrosov, alexander tereshkin, maksym
bazalii) observed the check:

if (fh->size > sizeof(struct nfs_fh))

should not use the size of the nfs_fh struct which includes an extra two
bytes from the size field.

struct nfs_fh {
unsigned short         size;
unsigned char          data[NFS_MAXFHSIZE];
}

but should determine the size from data[NFS_MAXFHSIZE] so the memcpy
will not write 2 bytes beyond destination.  The proposed fix is to
compare against the NFS_MAXFHSIZE directly, as is done elsewhere in fs
code base.

Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Nikola Livic <nlivic@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: endpoint: Fix missing destroy_workqueue()

[ Upstream commit acaef7981a218813e3617edb9c01837808de063c ]

Add the missing destroy_workqueue() before return from
pci_epf_test_init() in the error handling case and add
destroy_workqueue() in pci_epf_test_exit().

Link: https://lore.kernel.org/r/20210331084012.2091010-1-yangyingliang@huawei.com
Fixes: 349e7a85b25fa ("PCI: endpoint: functions: Add an EP function to test PCI")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Deal correctly with attribute generation counter overflow

[ Upstream commit 9fdbfad1777cb4638f489eeb62d85432010c0031 ]

We need to use unsigned long subtraction and then convert to signed in
order to deal correcly with C overflow rules.

Fixes: f5062003465c ("NFS: Set an attribute barrier on all updates")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: Always flush out writes in nfs42_proc_fallocate()

[ Upstream commit 99f23783224355e7022ceea9b8d9f62c0fd01bd8 ]

Whether we're allocating or delallocating space, we should flush out the
pending writes in order to avoid races with attribute updates.

Fixes: 1e564d3dbd68 ("NFSv4.2: Fix a race in nfs42_proc_deallocate()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Fix attribute bitmask in _nfs42_proc_fallocate()

[ Upstream commit e99812e1382f0bfb6149393262bc70645c9f537a ]

We can't use nfs4_fattr_bitmap as a bitmask, because it hasn't been
filtered to represent the attributes supported by the server. Instead,
let's revert to using server->cache_consistency_bitmask after adding in
the missing SPACE_USED attribute.

Fixes: 913eca1aea87 ("NFS: Fallocate should use the nfs4_fattr_bitmap")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: nfs4_bitmask_adjust() must not change the server global bitmasks

[ Upstream commit 332d1a0373be32a3a3c152756bca45ff4f4e11b5 ]

As currently set, the calls to nfs4_bitmask_adjust() will end up
overwriting the contents of the nfs_server cache_consistency_bitmask
field.
The intention here should be to modify a private copy of that mask in
the close/delegreturn/write arguments.

Fixes: 76bd5c016ef4 ("NFSv4: make cache consistency bitmask dynamic")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rpmsg: qcom_glink_native: fix error return code of qcom_glink_rx_data()

[ Upstream commit 26594c6bbb60c6bc87e3762a86ceece57d164c66 ]

When idr_find() returns NULL to intent, no error return code of
qcom_glink_rx_data() is assigned.
To fix this bug, ret is assigned with -ENOENT in this case.

Fixes: 64f95f87920d ("rpmsg: glink: Use the local intents when receiving data")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20210306133624.17237-1-baijiaju1990@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to avoid accessing invalid fio in f2fs_allocate_data_block()

[ Upstream commit 25ae837e61dee712b4b1df36602ebfe724b2a0b6 ]

Callers may pass fio parameter with NULL value to f2fs_allocate_data_block(),
so we should make sure accessing fio's field after fio's validation check.

Fixes: f608c38c59c6 ("f2fs: clean up parameter of f2fs_allocate_data_block()")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: Fix a hungtask problem in atomic write

[ Upstream commit be1ee45d51384161681ecf21085a42d316ae25f7 ]

In the cache writing process, if it is an atomic file, increase the page
count of F2FS_WB_CP_DATA, otherwise increase the page count of
F2FS_WB_DATA.

When you step into the hook branch due to insufficient memory in
f2fs_write_begin, f2fs_drop_inmem_pages_all will be called to traverse
all atomic inodes and clear the FI_ATOMIC_FILE mark of all atomic files.

In f2fs_drop_inmem_pages，first acquire the inmem_lock , revoke all the
inmem_pages, and then clear the FI_ATOMIC_FILE mark. Before this mark is
cleared, other threads may hold inmem_lock to add inmem_pages to the inode
that has just been emptied inmem_pages, and increase the page count of
F2FS_WB_CP_DATA.

When the IO returns, it is found that the FI_ATOMIC_FILE flag is cleared
by f2fs_drop_inmem_pages_all, and f2fs_is_atomic_file returns false,which
causes the page count of F2FS_WB_DATA to be decremented. The page count of
F2FS_WB_CP_DATA cannot be cleared. Finally, hungtask is triggered in
f2fs_wait_on_all_pages because get_pages will never return zero.

process A: process B:
f2fs_drop_inmem_pages_all
->f2fs_drop_inmem_pages of inode#1
    ->mutex_lock(&fi->inmem_lock)
    ->__revoke_inmem_pages of inode#1 f2fs_ioc_commit_atomic_write
    ->mutex_unlock(&fi->inmem_lock) ->f2fs_commit_inmem_pages of inode#1
->mutex_lock(&fi->inmem_lock)
->__f2fs_commit_inmem_pages
    ->f2fs_do_write_data_page
        ->f2fs_outplace_write_data
            ->do_write_page
                ->f2fs_submit_page_write
                    ->inc_page_count(sbi, F2FS_WB_CP_DATA )
->mutex_unlock(&fi->inmem_lock)
    ->spin_lock(&sbi->inode_lock[ATOMIC_FILE]);
    ->clear_inode_flag(inode, FI_ATOMIC_FILE)
    ->spin_unlock(&sbi->inode_lock[ATOMIC_FILE])
f2fs_write_end_io
->dec_page_count(sbi, F2FS_WB_DATA );

We can fix the problem by putting the action of clearing the FI_ATOMIC_FILE
mark into the inmem_lock lock. This operation can ensure that no one will
submit the inmem pages before the FI_ATOMIC_FILE mark is cleared, so that
there will be no atomic writes waiting for writeback.

Fixes: 57864ae5ce3a ("f2fs: limit # of inmemory pages")
Signed-off-by: Yi Zhuang <zhuangyi1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to cover __allocate_new_section() with curseg_lock

[ Upstream commit 823d13e12b6cbaef2f6e5d63c648643e7bc094dd ]

In order to avoid race with f2fs_do_replace_block().

Fixes: f5a53edcf01e ("f2fs: support aligned pinned file")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to avoid touching checkpointed data in get_victim()

[ Upstream commit 61461fc921b756ae16e64243f72af2bfc2e620db ]

In CP disabling mode, there are two issues when using LFS or SSR | AT_SSR
mode to select victim:

1. LFS is set to find source section during GC, the victim should have
no checkpointed data, since after GC, section could not be set free for
reuse.

Previously, we only check valid chpt blocks in current segment rather
than section, fix it.

2. SSR | AT_SSR are set to find target segment for writes which can be
fully filled by checkpointed and newly written blocks, we should never
select such segment, otherwise it can cause panic or data corruption
during allocation, potential case is described as below:

 a) target segment has 'n' (n < 512) ckpt valid blocks
 b) GC migrates 'n' valid blocks to other segment (segment is still
    in dirty list)
 c) GC migrates '512 - n' blocks to target segment (segment has 'n'
    cp_vblocks and '512 - n' vblocks)
 d) If GC selects target segment via {AT,}SSR allocator, however there
    is no free space in targe segment.

Fixes: 4354994f097d ("f2fs: checkpoint disabling")
Fixes: 093749e296e2 ("f2fs: support age threshold based garbage collection")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: endpoint: Fix NULL pointer dereference for ->get_features()

[ Upstream commit 6613bc2301ba291a1c5a90e1dc24cf3edf223c03 ]

get_features ops of pci_epc_ops may return NULL, causing NULL pointer
dereference in pci_epf_test_alloc_space function. Let us add a check for
pci_epc_feature pointer in pci_epf_test_bind before we access it to avoid
any such NULL pointer dereference and return -ENOTSUPP in case
pci_epc_feature is not found.

When the patch is not applied and EPC features is not implemented in the
platform driver, we see the following dump due to kernel NULL pointer
dereference.

Call trace:
 pci_epf_test_bind+0xf4/0x388
 pci_epf_bind+0x3c/0x80
 pci_epc_epf_link+0xa8/0xcc
 configfs_symlink+0x1a4/0x48c
 vfs_symlink+0x104/0x184
 do_symlinkat+0x80/0xd4
 __arm64_sys_symlinkat+0x1c/0x24
 el0_svc_common.constprop.3+0xb8/0x170
 el0_svc_handler+0x70/0x88
 el0_svc+0x8/0x640
Code: d2800581 b9403ab9 f9404ebb 8b394f60 (f9400400)
---[ end trace a438e3c5a24f9df0 ]---

Link: https://lore.kernel.org/r/20210324101609.79278-1-shradha.t@samsung.com
Fixes: 2c04c5b8eef79 ("PCI: pci-epf-test: Use pci_epc_get_features() to get EPC features")
Signed-off-by: Sriram Dash <dash.sriram@gmail.com>
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: endpoint: Make *_free_bar() to return error codes on failure

[ Upstream commit 0e27aeccfa3d1bab7c6a29fb8e6fcedbad7b09a8 ]

Modify pci_epc_get_next_free_bar() and pci_epc_get_first_free_bar() to
return error values if there are no free BARs available.

Link: https://lore.kernel.org/r/20210201195809.7342-5-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: endpoint: Add helper API to get the 'next' unreserved BAR

[ Upstream commit fa8fef0e104a23efe568b835d9e7e188d1d97610 ]

Add an API to get the next unreserved BAR starting from a given BAR number
that can be used by the endpoint function.

Link: https://lore.kernel.org/r/20210201195809.7342-4-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: endpoint: Make *_get_first_free_bar() take into account 64 bit BAR

[ Upstream commit 959a48d0eac0321948c9f3d1707ba22c100e92d5 ]

pci_epc_get_first_free_bar() uses only "reserved_bar" member in
epc_features to get the first unreserved BAR. However if the reserved BAR
is also a 64-bit BAR, then the next BAR shouldn't be returned (since 64-bit
BAR uses two BARs).

Make pci_epc_get_first_free_bar() take into account 64 bit BAR while
returning the first free unreserved BAR.

Link: https://lore.kernel.org/r/20210201195809.7342-3-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to update last i_size if fallocate partially succeeds

[ Upstream commit 88f2cfc5fa90326edb569b4a81bb38ed4dcd3108 ]

In the case of expanding pinned file, map.m_lblk and map.m_len
will update in each round of section allocation, so in error
path, last i_size will be calculated with wrong m_lblk and m_len,
fix it.

Fixes: f5a53edcf01e ("f2fs: support aligned pinned file")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to align to section for fallocate() on pinned file

[ Upstream commit e1175f02291141bbd924fc578299305fcde35855 ]

Now, fallocate() on a pinned file only allocates blocks which aligns
to segment rather than section, so GC may try to migrate pinned file's
block, and after several times of failure, pinned file's block could
be migrated to other place, however user won't be aware of such
condition, and then old obsolete block address may be readed/written
incorrectly.

To avoid such condition, let's try to allocate pinned file's blocks
with section alignment.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9064/1: hw_breakpoint: Do not directly check the event's overflow_handler hook

[ Upstream commit a506bd5756290821a4314f502b4bafc2afcf5260 ]

The commit 1879445dfa7b ("perf/core: Set event's default
::overflow_handler()") set a default event->overflow_handler in
perf_event_alloc(), and replace the check event->overflow_handler with
is_default_overflow_handler(), but one is missing.

Currently, the bp->overflow_handler can not be NULL. As a result,
enable_single_step() is always not invoked.

Comments from Zhen Lei:

 https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210207105934.2001-1-thunder.leizhen@huawei.com/

Fixes: 1879445dfa7b ("perf/core: Set event's default ::overflow_handler()")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Wang Nan <wangnan0@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Release OF node in pci_scan_device()'s error path

[ Upstream commit c99e755a4a4c165cad6effb39faffd0f3377c02d ]

In pci_scan_device(), if pci_setup_device() fails for any reason, the code
will not release device's of_node by calling pci_release_of_node().  Fix
that by calling the release function.

Fixes: 98d9f30c820d ("pci/of: Match PCI devices to OF nodes dynamically")
Link: https://lore.kernel.org/r/20210124232826.1879-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: iproc: Fix return value of iproc_msi_irq_domain_alloc()

[ Upstream commit 1e83130f01b04c16579ed5a5e03d729bcffc4c5d ]

IRQ domain alloc function should return zero on success. Non-zero value
indicates failure.

Link: https://lore.kernel.org/r/20210303142202.25780-1-pali@kernel.org
Fixes: fc54bae28818 ("PCI: iproc: Allow allocation of multiple MSIs")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

remoteproc: qcom_q6v5_mss: Validate p_filesz in ELF loader

[ Upstream commit 3d2ee78906af5f08d499d6aa3aa504406fa38106 ]

Analog to the issue in the common mdt_loader code the MSS ELF loader
does not validate that p_filesz bytes will fit in the memory region and
that the loaded segments are not truncated. Fix this in the same way
as proposed for the mdt_loader.

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: 135b9e8d1cd8 ("remoteproc: qcom_q6v5_mss: Validate modem blob firmware size before load")
Link: https://lore.kernel.org/r/20210312232002.3466791-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

remoteproc: qcom_q6v5_mss: Replace ioremap with memremap

[ Upstream commit 04ff5d19cf6e2f9dbdf137c0c6eb44934d46a99c ]

Fix the sparse warnings reported by the kernel test bot by replacing
ioremap calls with memremap.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/1604473422-29639-1-git-send-email-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix a redundant call to f2fs_balance_fs if an error occurs

[ Upstream commit 28e18ee636ba28532dbe425540af06245a0bbecb ]

The  uninitialized variable dn.node_changed does not get set when a
call to f2fs_get_node_page fails.  This uninitialized value gets used
in the call to f2fs_balance_fs() that may or not may not balances
dirty node and dentry pages depending on the uninitialized state of
the variable. Fix this by only calling f2fs_balance_fs if err is
not set.

Thanks to Jaegeuk Kim for suggesting an appropriate fix.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 2a3407607028 ("f2fs: call f2fs_balance_fs only when node was changed")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix panic during f2fs_resize_fs()

[ Upstream commit 3ab0598e6d860ef49d029943ba80f627c15c15d6 ]

f2fs_resize_fs() hangs in below callstack with testcase:
- mkfs 16GB image & mount image
- dd 8GB fileA
- dd 8GB fileB
- sync
- rm fileA
- sync
- resize filesystem to 8GB

kernel BUG at segment.c:2484!
Call Trace:
 allocate_segment_by_default+0x92/0xf0 [f2fs]
 f2fs_allocate_data_block+0x44b/0x7e0 [f2fs]
 do_write_page+0x5a/0x110 [f2fs]
 f2fs_outplace_write_data+0x55/0x100 [f2fs]
 f2fs_do_write_data_page+0x392/0x850 [f2fs]
 move_data_page+0x233/0x320 [f2fs]
 do_garbage_collect+0x14d9/0x1660 [f2fs]
 free_segment_range+0x1f7/0x310 [f2fs]
 f2fs_resize_fs+0x118/0x330 [f2fs]
 __f2fs_ioctl+0x487/0x3680 [f2fs]
 __x64_sys_ioctl+0x8e/0xd0
 do_syscall_64+0x33/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

The root cause is we forgot to check that whether we have enough space
in resized filesystem to store all valid blocks in before-resizing
filesystem, then allocator will run out-of-space during block migration
in free_segment_range().

Fixes: b4b10061ef98 ("f2fs: refactor resize_fs to avoid meta updates in progress")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to allow migrating fully valid segment

[ Upstream commit 7dede88659df38f96128ab3922c50dde2d29c574 ]

F2FS_IOC_FLUSH_DEVICE/F2FS_IOC_RESIZE_FS needs to migrate all blocks of
target segment to other place, no matter the segment has partially or fully
valid blocks.

However, after commit 803e74be04b3 ("f2fs: stop GC when the victim becomes
fully valid"), we may skip migration due to target segment is fully valid,
result in failing the ioctl interface, fix this.

Fixes: 803e74be04b3 ("f2fs: stop GC when the victim becomes fully valid")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix compat F2FS_IOC_{MOVE,GARBAGE_COLLECT}_RANGE

[ Upstream commit 34178b1bc4b5c936eab3adb4835578093095a571 ]

Eric reported a ioctl bug in below link:

https://lore.kernel.org/linux-f2fs-devel/20201103032234.GB2875@sol.localdomain/

That said, on some 32-bit architectures, u64 has only 32-bit alignment,
notably i386 and x86_32, so that size of struct f2fs_gc_range compiled
in x86_32 is 20 bytes, however the size in x86_64 is 24 bytes, binary
compiled in x86_32 can not call F2FS_IOC_GARBAGE_COLLECT_RANGE successfully
due to mismatched value of ioctl command in between binary and f2fs
module, similarly, F2FS_IOC_MOVE_RANGE will fail too.

In this patch we introduce two ioctls for compatibility of above special
32-bit binary:
- F2FS_IOC32_GARBAGE_COLLECT_RANGE
- F2FS_IOC32_MOVE_RANGE

Reported-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: move ioctl interface definitions to separated file

[ Upstream commit fa4320cefb8537a70cc28c55d311a1f569697cd3 ]

Like other filesystem does, we introduce a new file f2fs.h in path of
include/uapi/linux/, and move f2fs-specified ioctl interface definitions
to that file, after then, in order to use those definitions, userspace
developer only need to include the new header file rather than
copy & paste definitions from fs/f2fs/f2fs.h.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal: thermal_of: Fix error return code of thermal_of_populate_bind_params()

[ Upstream commit 45c7eaeb29d67224db4ba935deb575586a1fda09 ]

When kcalloc() returns NULL to __tcbp or of_count_phandle_with_args()
returns zero or -ENOENT to count, no error return code of
thermal_of_populate_bind_params() is assigned.
To fix these bugs, ret is assigned with -ENOMEM and -ENOENT in these
cases, respectively.

Fixes: a92bab8919e3 ("of: thermal: Allow multiple devices to share cooling map")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210310122423.3266-1-baijiaju1990@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt286: Make RT286_SET_GPIO_* readable and writable

[ Upstream commit cd8499d5c03ba260e3191e90236d0e5f6b147563 ]

The GPIO configuration cannot be applied if the registers are inaccessible.
This prevented the headset mic from working on the Dell XPS 13 9343.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=114171
Signed-off-by: David Ward <david.ward@gatech.edu>
Link: https://lore.kernel.org/r/20210418134658.4333-5-david.ward@gatech.edu
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: fix barriers when printing backtraces from all CPUs

[ Upstream commit 9f113bf760ca90d709f8f89a733d10abb1f04a83 ]

Any parallel softlockup reports are skipped when one CPU is already
printing backtraces from all CPUs.

The exclusive rights are synchronized using one bit in
soft_lockup_nmi_warn.  There is also one memory barrier that does not make
much sense.

Use two barriers on the right location to prevent mixing two reports.

[pmladek@suse.com: use bit lock operations to prevent multiple soft-lockup reports]
Link: https://lkml.kernel.org/r/YFSVsLGVWMXTvlbk@alley
Link: https://lkml.kernel.org/r/20210311122130.6788-6-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog/softlockup: remove logic that tried to prevent repeated reports

[ Upstream commit 1bc503cb4a2638fb1c57801a7796aca57845ce63 ]

The softlockup detector does some gymnastic with the variable
soft_watchdog_warn.  It was added by the commit 58687acba59266735ad
("lockup_detector: Combine nmi_watchdog and softlockup detector").

The purpose is not completely clear.  There are the following clues.  They
describe the situation how it looked after the above mentioned commit:

  1. The variable was checked with a comment "only warn once".

  2. The variable was set when softlockup was reported. It was cleared
     only when the CPU was not longer in the softlockup state.

  3. watchdog_touch_ts was not explicitly updated when the softlockup
     was reported. Without this variable, the report would normally
     be printed again during every following watchdog_timer_fn()
     invocation.

The logic has got even more tangled up by the commit ed235875e2ca98
("kernel/watchdog.c: print traces for all cpus on lockup detection").
After this commit, soft_watchdog_warn is set only when
softlockup_all_cpu_backtrace is enabled.  But multiple reports from all
CPUs are prevented by a new variable soft_lockup_nmi_warn.

Conclusion:

The variable probably never worked as intended.  In each case, it has not
worked last many years because the softlockup was reported repeatedly
after the full period defined by watchdog_thresh.

The reason is that watchdog gets touched in many known slow paths, for
example, in printk_stack_address().  This code is called also when
printing the softlockup report.  It means that the watchdog timestamp gets
updated after each report.

Solution:

Simply remove the logic. People want the periodic report anyway.

Link: https://lkml.kernel.org/r/20210311122130.6788-5-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: explicitly update timestamp when reporting softlockup

[ Upstream commit c9ad17c991492f4390f42598f6ab0531f87eed07 ]

The softlockup situation might stay for a long time or even forever.  When
it happens, the softlockup debug messages are printed in regular intervals
defined by get_softlockup_thresh().

There is a mystery.  The repeated message is printed after the full
interval that is defined by get_softlockup_thresh().  But the timer
callback is called more often as defined by sample_period.  The code looks
like the soflockup should get reported in every sample_period when it was
once behind the thresh.

It works only by chance.  The watchdog is touched when printing the stall
report, for example, in printk_stack_address().

Make the behavior clear and predictable by explicitly updating the
timestamp in watchdog_timer_fn() when the report gets printed.

Link: https://lkml.kernel.org/r/20210311122130.6788-3-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: rename __touch_watchdog() to a better descriptive name

[ Upstream commit 7c0012f522c802d25be102bafe54f333168e6119 ]

Patch series "watchdog/softlockup: Report overall time and some cleanup", v2.

I dug deep into the softlockup watchdog history when time permitted this
year.  And reworked the patchset that fixed timestamps and cleaned up the
code[2].

I split it into very small steps and did even more code clean up.  The
result looks quite strightforward and I am pretty confident with the
changes.

[1] v2: https://lore.kernel.org/r/20201210160038.31441-1-pmladek@suse.com
[2] v1: https://lore.kernel.org/r/20191024114928.15377-1-pmladek@suse.com

This patch (of 6):

There are many touch_*watchdog() functions.  They are called in situations
where the watchdog could report false positives or create unnecessary
noise.  For example, when CPU is entering idle mode, a virtual machine is
stopped, or a lot of messages are printed in the atomic context.

These functions set SOFTLOCKUP_RESET instead of a real timestamp.  It
allows to call them even in a context where jiffies might be outdated.
For example, in an atomic context.

The real timestamp is set by __touch_watchdog() that is called from the
watchdog timer callback.

Rename this callback to update_touch_ts().  It better describes the effect
and clearly distinguish is from the other touch_*watchdog() functions.

Another motivation is that two timestamps are going to be used.  One will
be used for the total softlockup time.  The other will be used to measure
time since the last report.  The new function name will help to
distinguish which timestamp is being updated.

Link: https://lkml.kernel.org/r/20210311122130.6788-1-pmladek@suse.com
Link: https://lkml.kernel.org/r/20210311122130.6788-2-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ia64: module: fix symbolizer crash on fdescr

[ Upstream commit 99e729bd40fb3272fa4b0140839d5e957b58588a ]

Noticed failure as a crash on ia64 when tried to symbolize all backtraces
collected by page_owner=on:

    $ cat /sys/kernel/debug/page_owner
    <oops>

    CPU: 1 PID: 2074 Comm: cat Not tainted 5.12.0-rc4 #226
    Hardware name: hp server rx3600, BIOS 04.03 04/08/2008
    ip is at dereference_module_function_descriptor+0x41/0x100

Crash happens at dereference_module_function_descriptor() due to
use-after-free when dereferencing ".opd" section header.

All section headers are already freed after module is laoded successfully.

To keep symbolizer working the change stores ".opd" address and size after
module is relocated to a new place and before section headers are
discarded.

To make similar errors less obscure module_finalize() now zeroes out all
variables relevant to module loading only.

Link: https://lkml.kernel.org/r/20210403074803.3309096-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Add PCI IDs for Hyper-V VF devices.

[ Upstream commit 7fbf359bb2c19c824cbb1954020680824f6ee5a5 ]

Support VF device IDs used by the Hyper-V hypervisor.

Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: generate Module.symvers only when vmlinux exists

[ Upstream commit 69bc8d386aebbd91a6bb44b6d33f77c8dfa9ed8c ]

The external module build shows the following warning if Module.symvers
is missing in the kernel tree.

  WARNING: Symbol version dump "Module.symvers" is missing.
           Modules may not have dependencies or modversions.

I think this is an important heads-up because the resulting modules may
not work as expected. This happens when you did not build the entire
kernel tree, for example, you might have prepared the minimal setups
for external modules by 'make defconfig && make modules_preapre'.

A problem is that 'make modules' creates Module.symvers even without
vmlinux. In this case, that warning is suppressed since Module.symvers
already exists in spite of its incomplete content.

The incomplete (i.e. invalid) Module.symvers should not be created.

This commit changes the second pass of modpost to dump symbols into
modules-only.symvers. The final Module.symvers is created by
concatenating vmlinux.symvers and modules-only.symvers if both exist.

Module.symvers is supposed to collect symbols from both vmlinux and
modules. It might be a bit confusing, and I am not quite sure if it
is an official interface, but presumably it is difficult to rename it
because some tools (e.g. kmod) parse it.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: mlxsw: Fix mausezahn invocation in ERSPAN scale test

[ Upstream commit 1233898ab758cbcf5f6fea10b8dd16a0b2c24fab ]

The mirror_gre_scale test creates as many ERSPAN sessions as the underlying
chip supports, and tests that they all work. In order to determine that it
issues a stream of ICMP packets and checks if they are mirrored as
expected.

However, the mausezahn invocation missed the -6 flag to identify the use of
IPv6 protocol, and was sending ICMP messages over IPv6, as opposed to
ICMP6. It also didn't pass an explicit source IP address, which apparently
worked at some point in the past, but does not anymore.

To fix these issues, extend the function mirror_test() in mirror_lib by
detecting the IPv6 protocol addresses, and using a different ICMP scheme.
Fix __mirror_gre_test() in the selftest itself to pass a source IP address.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: mlxsw: Increase the tolerance of backlog buildup

[ Upstream commit dda7f4fa55839baeb72ae040aeaf9ccf89d3e416 ]

The intention behind this test is to make sure that qdisc limit is
correctly projected to the HW. However, first, due to rounding in the
qdisc, and then in the driver, the number cannot actually be accurate. And
second, the approach to testing this is to oversubscribe the port with
traffic generated on the same switch. The actual backlog size therefore
fluctuates.

In practice, this test proved to be noisier than the rest, and spuriously
fails every now and then. Increase the tolerance to 10 % to avoid these
issues.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mtk_eth_soc: fix RX VLAN offload

[ Upstream commit 3f57d8c40fea9b20543cab4da12f4680d2ef182c ]

The VLAN ID in the rx descriptor is only valid if the RX_DMA_VTAG bit is
set. Fixes frames wrongly marked with VLAN tags.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
[Ilya: fix commit message]
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: remove duplicate free resources calls

[ Upstream commit 1a0e880b028f97478dc689e2900b312741d0d772 ]

Both iavf_free_all_tx_resources() and iavf_free_all_rx_resources() have
already been called in the very same function.
Remove the duplicate calls.

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/iommu: Annotate nested lock for lockdep

[ Upstream commit cc7130bf119add37f36238343a593b71ef6ecc1e ]

The IOMMU table is divided into pools for concurrent mappings and each
pool has a separate spinlock. When taking the ownership of an IOMMU group
to pass through a device to a VM, we lock these spinlocks which triggers
a false negative warning in lockdep (below).

This fixes it by annotating the large pool's spinlock as a nest lock
which makes lockdep not complaining when locking nested locks if
the nest lock is locked already.

===
WARNING: possible recursive locking detected
5.11.0-le_syzkaller_a+fstn1 #100 Not tainted
--------------------------------------------
qemu-system-ppc/4129 is trying to acquire lock:
c0000000119bddb0 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0

but task is already holding lock:
c0000000119bdd30 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(p->lock)/1);
  lock(&(p->lock)/1);
===

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210301063653.51003-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

qtnfmac: Fix possible buffer overflow in qtnf_event_handle_external_auth

[ Upstream commit 130f634da1af649205f4a3dd86cbe5c126b57914 ]

Function qtnf_event_handle_external_auth calls memcpy without
checking the length.
A user could control that length and trigger a buffer overflow.
Fix by checking the length is within the maximum allowed size.

Signed-off-by: Lee Gibson <leegib@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210419145842.345787-1-leegib@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wl3501_cs: Fix out-of-bounds warnings in wl3501_mgmt_join

[ Upstream commit bb43e5718d8f1b46e7a77e7b39be3c691f293050 ]

Fix the following out-of-bounds warnings by adding a new structure
wl3501_req instead of duplicating the same members in structure
wl3501_join_req and wl3501_scan_confirm:

arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [39, 108] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 36 [-Warray-bounds]
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [25, 95] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 22 [-Warray-bounds]

Refactor the code, accordingly:

$ pahole -C wl3501_req drivers/net/wireless/wl3501_cs.o
struct wl3501_req {
        u16                        beacon_period;        /*     0     2 */
        u16                        dtim_period;          /*     2     2 */
        u16                        cap_info;             /*     4     2 */
        u8                         bss_type;             /*     6     1 */
        u8                         bssid[6];             /*     7     6 */
        struct iw_mgmt_essid_pset  ssid;                 /*    13    34 */
        struct iw_mgmt_ds_pset     ds_pset;              /*    47     3 */
        struct iw_mgmt_cf_pset     cf_pset;              /*    50     8 */
        struct iw_mgmt_ibss_pset   ibss_pset;            /*    58     4 */
        struct iw_mgmt_data_rset   bss_basic_rset;       /*    62    10 */

        /* size: 72, cachelines: 2, members: 10 */
        /* last cacheline: 8 bytes */
};

$ pahole -C wl3501_join_req drivers/net/wireless/wl3501_cs.o
struct wl3501_join_req {
        u16                        next_blk;             /*     0     2 */
        u8                         sig_id;               /*     2     1 */
        u8                         reserved;             /*     3     1 */
        struct iw_mgmt_data_rset   operational_rset;     /*     4    10 */
        u16                        reserved2;            /*    14     2 */
        u16                        timeout;              /*    16     2 */
        u16                        probe_delay;          /*    18     2 */
        u8                         timestamp[8];         /*    20     8 */
        u8                         local_time[8];        /*    28     8 */
        struct wl3501_req          req;                  /*    36    72 */

        /* size: 108, cachelines: 2, members: 10 */
        /* last cacheline: 44 bytes */
};

$ pahole -C wl3501_scan_confirm drivers/net/wireless/wl3501_cs.o
struct wl3501_scan_confirm {
        u16                        next_blk;             /*     0     2 */
        u8                         sig_id;               /*     2     1 */
        u8                         reserved;             /*     3     1 */
        u16                        status;               /*     4     2 */
        char                       timestamp[8];         /*     6     8 */
        char                       localtime[8];         /*    14     8 */
        struct wl3501_req          req;                  /*    22    72 */
        /* --- cacheline 1 boundary (64 bytes) was 30 bytes ago --- */
        u8                         rssi;                 /*    94     1 */

        /* size: 96, cachelines: 2, members: 8 */
        /* padding: 1 */
        /* last cacheline: 32 bytes */
};

The problem is that the original code is trying to copy data into a
bunch of struct members adjacent to each other in a single call to
memcpy(). Now that a new struct wl3501_req enclosing all those adjacent
members is introduced, memcpy() doesn't overrun the length of
&sig.beacon_period and &this->bss_set[i].beacon_period, because the
address of the new struct object _req_ is used as the destination,
instead.

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1fbaf516da763b50edac47d792a9145aa4482e29.1618442265.git.gustavoars@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

wl3501_cs: Fix out-of-bounds warnings in wl3501_send_pkt

[ Upstream commit 820aa37638a252b57967bdf4038a514b1ab85d45 ]

Fix the following out-of-bounds warnings by enclosing structure members
daddr and saddr into new struct addr, in structures wl3501_md_req and
wl3501_md_ind:

arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds]
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds]

Refactor the code, accordingly:

$ pahole -C wl3501_md_req drivers/net/wireless/wl3501_cs.o
struct wl3501_md_req {
u16                        next_blk;             /*     0     2 */
u8                         sig_id;               /*     2     1 */
u8                         routing;              /*     3     1 */
u16                        data;                 /*     4     2 */
u16                        size;                 /*     6     2 */
u8                         pri;                  /*     8     1 */
u8                         service_class;        /*     9     1 */
struct {
u8                 daddr[6];             /*    10     6 */
u8                 saddr[6];             /*    16     6 */
} addr;                                          /*    10    12 */

/* size: 22, cachelines: 1, members: 8 */
/* last cacheline: 22 bytes */
};

$ pahole -C wl3501_md_ind drivers/net/wireless/wl3501_cs.o
struct wl3501_md_ind {
u16                        next_blk;             /*     0     2 */
u8                         sig_id;               /*     2     1 */
u8                         routing;              /*     3     1 */
u16                        data;                 /*     4     2 */
u16                        size;                 /*     6     2 */
u8                         reception;            /*     8     1 */
u8                         pri;                  /*     9     1 */
u8                         service_class;        /*    10     1 */
struct {
u8                 daddr[6];             /*    11     6 */
u8                 saddr[6];             /*    17     6 */
} addr;                                          /*    11    12 */

/* size: 24, cachelines: 1, members: 9 */
/* padding: 1 */
/* last cacheline: 24 bytes */
};

The problem is that the original code is trying to copy data into a
couple of arrays adjacent to each other in a single call to memcpy().
Now that a new struct _addr_ enclosing those two adjacent arrays
is introduced, memcpy() doesn't overrun the length of &sig.daddr[0]
and &sig.daddr, because the address of the new struct object _addr_
is used, instead.

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/d260fe56aed7112bff2be5b4d152d03ad7b78e78.1618442265.git.gustavoars@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp: Free SEV device if SEV init fails

[ Upstream commit b61a9071dc72a3c709192c0c00ab87c2b3de1d94 ]

Free the SEV device if later initialization fails.  The memory isn't
technically leaked as it's tracked in the top-level device's devres
list, but unless the top-level device is removed, the memory won't be
freed and is effectively leaked.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210406224952.4177376-2-seanjc@google.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7615: fix entering driver-own state on mt7663

[ Upstream commit 5c7d374444afdeb9dd534a37c4f6c13af032da0c ]

Fixes hardware wakeup issues

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Add mem sync flag for IB allocated by SA

[ Upstream commit 5c88e3b86a88f14efa0a3ddd28641c6ff49fb9c4 ]

The buffer of SA bo will be used by many cases. So it's better
to invalidate the cache of indirect buffer allocated by SA before
commit the IB.

Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: add handling for hdcp2 rx id list validation

[ Upstream commit 4ccf9446b2a3615615045346c97f8a1e2a16568a ]

[why]
the current implementation of hdcp2 rx id list validation does not
have handler/checker for invalid message status, e.g. HMAC, the V
parameter calculated from PSP not matching the V prime from Rx.

[how]
return a generic FAILURE for any message status not SUCCESS or
REVOKED.

Signed-off-by: Dingchen (David) Zhang <dingchen.zhang@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: fixed divide by zero kernel crash during dsc enablement

[ Upstream commit 19cc1f3829567e7dca21c1389ea6407b8f5efab4 ]

[why]
During dsc enable, a divide by zero condition triggered the
kernel crash.

[how]
An IGT test, which enable the DSC, was crashing at the time of
restore the default dsc status, becaue of h_totals value
becoming 0. So add a check before divide condition. If h_total
is zero, gracefully ignore and set the default value.

kernel panic log:

[  128.758827] divide error: 0000 [#1] PREEMPT SMP NOPTI
[  128.762714] CPU: 5 PID: 4562 Comm: amd_dp_dsc Tainted: G        W         5.4.19-android-x86_64 #1
[  128.769728] Hardware name: ADVANCED MICRO DEVICES, INC. Mauna/Mauna, BIOS WMN0B13N Nov 11 2020
[  128.777695] RIP: 0010:hubp2_vready_at_or_After_vsync+0x37/0x7a [amdgpu]
[  128.785707] Code: 80 02 00 00 48 89 f3 48 8b 7f 08 b ......
[  128.805696] RSP: 0018:ffffad8f82d43628 EFLAGS: 00010246
......
[  128.857707] CR2: 00007106d8465000 CR3: 0000000426530000 CR4: 0000000000140ee0
[  128.865695] Call Trace:
[  128.869712] hubp3_setup+0x1f/0x7f [amdgpu]
[  128.873705] dcn20_update_dchubp_dpp+0xc8/0x54a [amdgpu]
[  128.877706] dcn20_program_front_end_for_ctx+0x31d/0x463 [amdgpu]
[  128.885706] dc_commit_state+0x3d2/0x658 [amdgpu]
[  128.889707] amdgpu_dm_atomic_commit_tail+0x4b3/0x1e7c [amdgpu]
[  128.897699] ? dm_read_reg_func+0x41/0xb5 [amdgpu]
[  128.901707] ? dm_read_reg_func+0x41/0xb5 [amdgpu]
[  128.905706] ? __is_insn_slot_addr+0x43/0x48
[  128.909706] ? fill_plane_buffer_attributes+0x29e/0x3dc [amdgpu]
[  128.917705] ? dm_plane_helper_prepare_fb+0x255/0x284 [amdgpu]
[  128.921700] ? usleep_range+0x7c/0x7c
[  128.925705] ? preempt_count_sub+0xf/0x18
[  128.929706] ? _raw_spin_unlock_irq+0x13/0x24
[  128.933732] ? __wait_for_common+0x11e/0x18f
[  128.937705] ? _raw_spin_unlock_irq+0x13/0x24
[  128.941706] ? __wait_for_common+0x11e/0x18f
[  128.945705] commit_tail+0x8b/0xd2 [drm_kms_helper]
[  128.949707] drm_atomic_helper_commit+0xd8/0xf5 [drm_kms_helper]
[  128.957706] amdgpu_dm_atomic_commit+0x337/0x360 [amdgpu]
[  128.961705] ? drm_atomic_check_only+0x543/0x68d [drm]
[  128.969705] ? drm_atomic_set_property+0x760/0x7af [drm]
[  128.973704] ? drm_mode_atomic_ioctl+0x6f3/0x85a [drm]
[  128.977705] drm_mode_atomic_ioctl+0x6f3/0x85a [drm]
[  128.985705] ? drm_atomic_set_property+0x7af/0x7af [drm]
[  128.989706] drm_ioctl_kernel+0x82/0xda [drm]
[  128.993706] drm_ioctl+0x225/0x319 [drm]
[  128.997707] ? drm_atomic_set_property+0x7af/0x7af [drm]
[  129.001706] ? preempt_count_sub+0xf/0x18
[  129.005713] amdgpu_drm_ioctl+0x4b/0x76 [amdgpu]
[  129.009705] vfs_ioctl+0x1d/0x2a
[  129.013705] do_vfs_ioctl+0x419/0x43d
[  129.017707] ksys_ioctl+0x52/0x71
[  129.021707] __x64_sys_ioctl+0x16/0x19
[  129.025706] do_syscall_64+0x78/0x85
[  129.029705] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Robin Singh <robin.singh@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Robin Singh <Robin.Singh@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries: Stop calling printk in rtas_stop_self()

[ Upstream commit ed8029d7b472369a010a1901358567ca3b6dbb0d ]

RCU complains about us calling printk() from an offline CPU:

  =============================
  WARNING: suspicious RCU usage
  5.12.0-rc7-02874-g7cf90e481cb8 #1 Not tainted
  -----------------------------
  kernel/locking/lockdep.c:3568 RCU-list traversed in non-reader section!!

  other info that might help us debug this:

  RCU used illegally from offline CPU!
  rcu_scheduler_active = 2, debug_locks = 1
  no locks held by swapper/0/0.

  stack backtrace:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7-02874-g7cf90e481cb8 #1
  Call Trace:
    dump_stack+0xec/0x144 (unreliable)
    lockdep_rcu_suspicious+0x124/0x144
    __lock_acquire+0x1098/0x28b0
    lock_acquire+0x128/0x600
    _raw_spin_lock_irqsave+0x6c/0xc0
    down_trylock+0x2c/0x70
    __down_trylock_console_sem+0x60/0x140
    vprintk_emit+0x1a8/0x4b0
    vprintk_func+0xcc/0x200
    printk+0x40/0x54
    pseries_cpu_offline_self+0xc0/0x120
    arch_cpu_idle_dead+0x54/0x70
    do_idle+0x174/0x4a0
    cpu_startup_entry+0x38/0x40
    rest_init+0x268/0x388
    start_kernel+0x748/0x790
    start_here_common+0x1c/0x614

Which happens because by the time we get to rtas_stop_self() we are
already offline. In addition the message can be spammy, and is not that
helpful for users, so remove it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210418135413.1204031-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples/bpf: Fix broken tracex1 due to kprobe argument change

[ Upstream commit 137733d08f4ab14a354dacaa9a8fc35217747605 ]

>From commit c0bbbdc32feb ("__netif_receive_skb_core: pass skb by
reference"), the first argument passed into __netif_receive_skb_core
has changed to reference of a skb pointer.

This commit fixes by using bpf_probe_read_kernel.

Signed-off-by: Yaqi Chen <chendotjs@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210416154803.37157-1-chendotjs@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: tapr: prevent cycle_time == 0 in parse_taprio_schedule

[ Upstream commit ed8157f1ebf1ae81a8fa2653e3f20d2076fad1c9 ]

There is a reproducible sequence from the userland that will trigger a WARN_ON()
condition in taprio_get_start_time, which causes kernel to panic if configured
as "panic_on_warn". Catch this condition in parse_taprio_schedule to
prevent this condition.

Reported as bug on syzkaller:
https://syzkaller.appspot.com/bug?extid=d50710fd0873a9c6b40c

Reported-by: syzbot+d50710fd0873a9c6b40c@syzkaller.appspotmail.com
Signed-off-by: Du Cheng <ducheng2@gmail.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ethtool: ioctl: Fix out-of-bounds warning in store_link_ksettings_for_user()

[ Upstream commit c1d9e34e11281a8ba1a1c54e4db554232a461488 ]

Fix the following out-of-bounds warning:

net/ethtool/ioctl.c:492:2: warning: 'memcpy' offset [49, 84] from the object at 'link_usettings' is out of the bounds of referenced subobject 'base' with type 'struct ethtool_link_settings' at offset 0 [-Warray-bounds]

The problem is that the original code is trying to copy data into a
some struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &link_usettings.base. Fix this by directly
using &link_usettings and _from_ as destination and source addresses,
instead.

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt286: Generalize support for ALC3263 codec

[ Upstream commit aa2f9c12821e6a4ba1df4fb34a3dbc6a2a1ee7fe ]

The ALC3263 codec on the XPS 13 9343 is also found on the Latitude 13 7350
and Venue 11 Pro 7140. They require the same handling for the combo jack to
work with a headset: GPIO pin 6 must be set.

The HDA driver always sets this pin on the ALC3263, which it distinguishes
by the codec vendor/device ID 0x10ec0288 and PCI subsystem vendor ID 0x1028
(Dell). The ASoC driver does not use PCI, so adapt this check to use DMI to
determine if Dell is the system vendor.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961
Signed-off-by: David Ward <david.ward@gatech.edu>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210418134658.4333-6-david.ward@gatech.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/smp: Set numa node before updating mask

[ Upstream commit 6980d13f0dd189846887bbbfa43793d9a41768d3 ]

Geethika reported a trace when doing a dlpar CPU add.

------------[ cut here ]------------
WARNING: CPU: 152 PID: 1134 at kernel/sched/topology.c:2057
CPU: 152 PID: 1134 Comm: kworker/152:1 Not tainted 5.12.0-rc5-master #5
Workqueue: events cpuset_hotplug_workfn
NIP:  c0000000001cfc14 LR: c0000000001cfc10 CTR: c0000000007e3420
REGS: c0000034a08eb260 TRAP: 0700   Not tainted  (5.12.0-rc5-master+)
MSR:  8000000000029033 <SF,EE,ME,IR,DR,RI,LE>  CR: 28828422  XER: 00000020
CFAR: c0000000001fd888 IRQMASK: 0 #012GPR00: c0000000001cfc10
c0000034a08eb500 c000000001f35400 0000000000000027 #012GPR04:
c0000035abaa8010 c0000035abb30a00 0000000000000027 c0000035abaa8018
#012GPR08: 0000000000000023 c0000035abaaef48 00000035aa540000
c0000035a49dffe8 #012GPR12: 0000000028828424 c0000035bf1a1c80
0000000000000497 0000000000000004 #012GPR16: c00000000347a258
0000000000000140 c00000000203d468 c000000001a1a490 #012GPR20:
c000000001f9c160 c0000034adf70920 c0000034aec9fd20 0000000100087bd3
#012GPR24: 0000000100087bd3 c0000035b3de09f8 0000000000000030
c0000035b3de09f8 #012GPR28: 0000000000000028 c00000000347a280
c0000034aefe0b00 c0000000010a2a68
NIP [c0000000001cfc14] build_sched_domains+0x6a4/0x1500
LR [c0000000001cfc10] build_sched_domains+0x6a0/0x1500
Call Trace:
[c0000034a08eb500] [c0000000001cfc10] build_sched_domains+0x6a0/0x1500 (unreliable)
[c0000034a08eb640] [c0000000001d1e6c] partition_sched_domains_locked+0x3ec/0x530
[c0000034a08eb6e0] [c0000000002936d4] rebuild_sched_domains_locked+0x524/0xbf0
[c0000034a08eb7e0] [c000000000296bb0] rebuild_sched_domains+0x40/0x70
[c0000034a08eb810] [c000000000296e74] cpuset_hotplug_workfn+0x294/0xe20
[c0000034a08ebc30] [c000000000178dd0] process_one_work+0x300/0x670
[c0000034a08ebd10] [c0000000001791b8] worker_thread+0x78/0x520
[c0000034a08ebda0] [c000000000185090] kthread+0x1a0/0x1b0
[c0000034a08ebe10] [c00000000000ccec] ret_from_kernel_thread+0x5c/0x70
Instruction dump:
7d2903a6 4e800421 e8410018 7f67db78 7fe6fb78 7f45d378 7f84e378 7c681b78
3c62ff1a 3863c6f8 4802dc35 60000000 <0fe00000> 3920fff4 f9210070 e86100a0
---[ end trace 532d9066d3d4d7ec ]---

Some of the per-CPU masks use cpu_cpu_mask as a filter to limit the search
for related CPUs. On a dlpar add of a CPU, update cpu_cpu_mask before
updating the per-CPU masks. This will ensure the cpu_cpu_mask is updated
correctly before its used in setting the masks. Setting the numa_node will
ensure that when cpu_cpu_mask() gets called, the correct node number is
used. This code movement helped fix the above call trace.

Reported-by: Geetika Moolchandani <Geetika.Moolchandani1@ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210401154200.150077-1-srikar@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

flow_dissector: Fix out-of-bounds warning in __skb_flow_bpf_to_target()

[ Upstream commit 1e3d976dbb23b3fce544752b434bdc32ce64aabc ]

Fix the following out-of-bounds warning:

net/core/flow_dissector.c:835:3: warning: 'memcpy' offset [33, 48] from the object at 'flow_keys' is out of the bounds of referenced subobject 'ipv6_src' with type '__u32[4]' {aka 'unsigned int[4]'} at offset 16 [-Warray-bounds]

The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy().  So, the compiler legitimately complains about it. As these
are just a couple of members, fix this by copying each one of them in
separate calls to memcpy().

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: Fix out-of-bounds warning in sctp_process_asconf_param()

[ Upstream commit e5272ad4aab347dde5610c0aedb786219e3ff793 ]

Fix the following out-of-bounds warning:

net/sctp/sm_make_chunk.c:3150:4: warning: 'memcpy' offset [17, 28] from the object at 'addr' is out of the bounds of referenced subobject 'v4' with type 'struct sockaddr_in' at offset 0 [-Warray-bounds]

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/hdmi: fix race in handling acomp ELD notification at resume

[ Upstream commit 0c37e2eb6b83e375e8a654d01598292d5591fc65 ]

When snd-hda-codec-hdmi is used with ASoC HDA controller like SOF (acomp
used for ELD notifications), display connection change done during suspend,
can be lost due to following sequence of events:

  1. system in S3 suspend
  2. DP/HDMI receiver connected
  3. system resumed
  4. HDA controller resumed, but card->deferred_resume_work not complete
  5. acomp eld_notify callback
  6. eld_notify ignored as power state is not CTL_POWER_D0
  7. HDA resume deferred work completed, power state set to CTL_POWER_D0

This results in losing the notification, and the jack state reported to
user-space is not correct.

The check on step 6 was added in commit 8ae743e82f0b ("ALSA: hda - Skip
ELD notification during system suspend"). It would seem with the deferred
resume logic in ASoC core, this check is not safe.

Fix the issue by modifying the check to use "dev.power.power_state.event"
instead of ALSA specific card power state variable.

BugLink: https://github.com/thesofproject/linux/issues/2825
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210416131157.1881366-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: sof_sdw: add quirk for new ADL-P Rvp

[ Upstream commit d25bbe80485f8bcbbeb91a2a6cd8798c124b27b7 ]

Add quirks for jack detection, rt711 DAI and DMIC

Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210415175013.192862-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek: Add quirk for Lenovo Ideapad S740

[ Upstream commit 26928ca1f06aab4361eb5adbe7ef3b5c82f13cf2 ]

Lenovo Ideapad S740 requires quite a few COEF setups to make its
speakers working.  The verb table was provided from Ryan Prescott as
the result of investigation via qemu:
  https://github.com/ryanprescott/realtek-verb-tools/wiki/How-to-sniff-verbs-from-a-Windows-sound-driver

BugLink: https://github.com/thesofproject/linux/issues/2748
Tested-by: Ryan Prescott <ryan@cousinscomputers.net>
Link: https://lore.kernel.org/r/20210416081211.20059-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kconfig: nconf: stop endless search loops

[ Upstream commit 8c94b430b9f6213dec84e309bb480a71778c4213 ]

If the user selects the very first entry in a page and performs a
search-up operation, or selects the very last entry in a page and
performs a search-down operation that will not succeed (e.g., via
[/]asdfzzz[Up Arrow]), nconf will never terminate searching the page.

The reason is that in this case, the starting point will be set to -1
or n, which is then translated into (n - 1) (i.e., the last entry of
the page) or 0 (i.e., the first entry of the page) and finally the
search begins. This continues to work fine until the index reaches 0 or
(n - 1), at which point it will be decremented to -1 or incremented to
n, but not checked against the starting point right away. Instead, it's
wrapped around to the bottom or top again, after which the starting
point check occurs... and naturally fails.

My original implementation added another check for -1 before wrapping
the running index variable around, but Masahiro Yamada pointed out that
the actual issue is that the comparison point (starting point) exceeds
bounds (i.e., the [0,n-1] interval) in the first place and that,
instead, the starting point should be fixed.

This has the welcome side-effect of also fixing the case where the
starting point was n while searching down, which also lead to an
infinite loop.

OTOH, this code is now essentially all his work.

Amazingly, nobody seems to have been hit by this for 11 years - or at
the very least nobody bothered to debug and fix this.

Signed-off-by: Mihai Moldovan <ionic@ionic.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: Set CC to clang in lib.mk if LLVM is set

[ Upstream commit 26e6dd1072763cd5696b75994c03982dde952ad9 ]

selftests/bpf/Makefile includes lib.mk. With the following command
  make -j60 LLVM=1 LLVM_IAS=1  <=== compile kernel
  make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1
some files are still compiled with gcc. This patch
fixed lib.mk issue which sets CC to gcc in all cases.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210413153413.3027426-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Force vsync flip when reconfiguring MPCC

[ Upstream commit 56d63782af9bbd1271bff1422a6a013123eade4d ]

[Why]
Underflow observed when disabling PIP overlay in-game when
vsync is disabled, due to OTC master lock not working with
game pipe which is immediate flip.

[How]
When performing a full update, override flip_immediate value
to false for all planes, so that flip occurs on vsync.

Signed-off-by: Anthony Wang <anthony1.wang@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>