John Harrison [Wed, 10 May 2023 20:55:56 +0000 (13:55 -0700)]
drm/i1915/guc: Fix probe injection CI failures after recent change
A recent change bumped a 'notice' message up to 'error' level for
debug builds to help trap incorrect configurations in CI systems.
Unfortunately, the error condition in question is triggered by the
error injection probe test. So change the message again to be 'probe
error' level instead.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes:
760133d42f0a ("drm/i915/uc: Make unexpected firmware versions an error in debug builds")
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230510205556.312999-1-John.C.Harrison@Intel.com
Alan Previn [Thu, 11 May 2023 23:17:38 +0000 (16:17 -0700)]
drm/i915/pxp: Enable PXP with MTL-GSC-CS
Enable PXP with MTL-GSC-CS: add the has_pxp into device info
and increase the debugfs teardown timeouts to align with
new GSC-CS + firmware specs.
Now that we have 3 places that are selecting pxp timeouts
based on tee vs gsccs back-end, let's add a helper.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-9-alan.previn.teres.alexis@intel.com
Alan Previn [Thu, 11 May 2023 23:17:37 +0000 (16:17 -0700)]
drm/i915/pxp: On MTL, KCR enabling doesn't wait on tee component
On legacy platforms, KCR HW enabling is done at the time the mei
component interface is bound. It's also disabled during unbind.
However, for MTL onwards, we don't depend on a tee component
to start sending GSC-CS firmware messages.
Thus, immediately enable (or disable) KCR HW on PXP's init,
fini and resume.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-8-alan.previn.teres.alexis@intel.com
Alan Previn [Thu, 11 May 2023 23:17:36 +0000 (16:17 -0700)]
drm/i915/uapi/pxp: Add a GET_PARAM for PXP
Because of the additional firmware, component-driver and
initialization depedencies required on MTL platform before a
PXP context can be created, UMD calling for PXP creation as a
way to get-caps can take a long time. An actual real world
customer stack has seen this happen in the 4-to-8 second range
after the kernel starts (which sees MESA's init appear in the
middle of this range as the compositor comes up). To avoid
unncessary delays experienced by the UMD for get-caps purposes,
add a GET_PARAM for I915_PARAM_PXP_SUPPORT.
However, some failures can still occur after all the depedencies
are met (such as firmware init flow failure, bios configurations
or SOC fusing not allowing PXP enablement). Those scenarios will
only be known to user space when it attempts creating a PXP context
and is documented in the GEM UAPI headers.
While making this change, create a helper that is common to both
GET_PARAM caller and intel_pxp_start since the latter does
similar checks.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-7-alan.previn.teres.alexis@intel.com
Alan Previn [Thu, 11 May 2023 23:17:35 +0000 (16:17 -0700)]
drm/i915/pxp: Add ARB session creation and cleanup
Add MTL's function for ARB session creation using PXP firmware
version 4.3 ABI structure format.
While relooking at the ARB session creation flow in intel_pxp_start,
let's address missing UAPI documentation. Without actually changing
backward compatible behavior, update i915's drm-uapi comments
that describe the possible error values when creating a context
with I915_CONTEXT_PARAM_PROTECTED_CONTENT:
Since the first merge of PXP support on ADL, i915 returns -ENXIO
if a dependency such as firmware or component driver was yet to
be loaded or returns -EIO if the creation attempt failed when
requested by the PXP firmware (specific firmware error responses
are reported in dmesg).
Add MTL's function for ARB session invalidation but this
reuses PXP firmware version 4.2 ABI structure format.
For both cases, in the back-end gsccs functions for sending messages
to the firmware inspect the GSC-CS-Mem-Header's pending-bit which
means the GSC firmware is busy and we should retry.
Given the last hw requirement, lets also update functions in
front-end layer that wait for session creation or teardown
completion to use new worst case timeout periods.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-6-alan.previn.teres.alexis@intel.com
Alan Previn [Thu, 11 May 2023 23:17:34 +0000 (16:17 -0700)]
drm/i915/pxp: Add GSC-CS backend to send GSC fw messages
Add GSC engine based method for sending PXP firmware packets
to the GSC firmware for MTL (and future) products.
Use the newly added helpers to populate the GSC-CS memory
header and send the message packet to the FW by dispatching
the GSC_HECI_CMD_PKT instruction on the GSC engine.
We use non-priveleged batches for submission to GSC engine
which require two buffers for the request:
- a buffer for the HECI packet that contains PXP FW commands
- a batch-buffer that contains the engine instruction for
sending the HECI packet to the GSC firmware.
Thus, add the allocation and freeing of these buffers in gsccs
init and fini.
The GSC-fw may reply to commands with a SUCCESS but with an
additional pending-bit set in the reply packet. This bit
means the GSC-FW is currently busy and the caller needs to
try again with the gsc_message_handle the fw returned. Thus,
add a wrapper to continuously retry send_message while
replaying the gsc_message_handle. Retries need to follow the
arch-spec count and delay until GSC-FW replies with the real
SUCCESS or timeout after that spec'd delay.
The GSC-fw requires a non-zero host_session_handle provided
by the caller to enable gsc_message_handle tracking. Thus,
allocate the host_session_handle at init and destroy it
at fini (the latter requiring an FYI to the gsc-firmware).
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-5-alan.previn.teres.alexis@intel.com
Alan Previn [Thu, 11 May 2023 23:17:33 +0000 (16:17 -0700)]
drm/i915/pxp: Add MTL helpers to submit Heci-Cmd-Packet to GSC
Add helper functions into a new file for heci-packet-submission.
The helpers will handle generating the MTL GSC-CS Memory-Header
and submission of the Heci-Cmd-Packet instructions to the engine.
NOTE1: These common functions for heci-packet-submission will be used
by different i915 callers:
1- GSC-SW-Proxy: This is pending upstream publication awaiting
a few remaining opens
2- MTL-HDCP: An equivalent patch has also been published at:
https://patchwork.freedesktop.org/series/111876/. (Patch 1)
3- PXP: This series.
NOTE2: A difference in this patch vs what is appearing is in bullet 2
above is that HDCP (and SW-Proxy) will be using priveleged submission
(GGTT and common gsc-uc-context) while PXP will be using non-priveleged
PPGTT, context and batch buffer. Therefore this patch will only slightly
overlap with the MTL-HDCP patches despite have very similar function
names (emit_foo vs emit_nonpriv_foo). This is because HECI_CMD_PKT
instructions require different flows and hw-specific code when done
via PPGTT based submission (not different from other engines). MTL-HDCP
contains the same intel_gsc_mtl_header_t structures as this but the
helpers there are different. Both add the same new file names.
NOTE3: Additional clarity about the heci-cmd-pkt layout and where the
common helpers come in:
- On MTL, when an i915 subsystem needs to send a command request
to the security firmware, it will send that via the GSC-
engine-command-streamer.
- However those commands, (lets call them "gsc_specific_fw_api"
calls), are not understood by the GSC command streamer hw.
- The GSC CS only looks at the GSC_HECI_CMD_PKT instruction and
passes it along to the GSC firmware.
- The GSC FW on the other hand needs additional metadata to know
which usage service is being called (PXP, HDCP, proxy, etc) along
with session specific info. Thus an extra header called GSC-CS
HECI Memory Header, (C) in below diagram is prepended before
the FW specific API, (D).
- Thus, the structural layout of the request submitted would
need to look like the diagram below (for non-priv PXP).
- In the diagram, the common helper for HDCP, (GSC-Sw-Proxy) and
PXP (i.e. new function intel_gsc_uc_heci_cmd_emit_mtl_header)
will populate blob (C) while additional helpers, different for
PPGGTT (this patch) vs GGTT (HDCP series) will populate
blobs (A) and (B) below.
___________________________________________________________
(A) | MI_BATCH_BUFFER_START (ppgtt, batchbuff-addr, ...) |
| | |
| _|________________________________________________ |
| (B)| GSC_HECI_CMD_PKT (pkt-addr-in, pkt-size-in, | |
| | pkt-addr-out, pkt-size-out) |--------
| | MI_BATCH_BUFFER_END | | |
| |________________________________________________| | |
| | |
|_________________________________________________________| |
|
---------------------------------------------------------
|
\|/
______V___________________________________________
| _________________________________________ |
|(C)| | |
| | struct intel_gsc_mtl_header { | |
| | validity marker | |
| | heci_clent_id | |
| | ... | |
| | } | |
| |_______________________________________| |
|(D)| | |
| | struct gsc_fw_specific_api_foobar { | |
| | ... | |
| | For an example, see | |
| | 'struct pxp43_create_arb_in' at | |
| | intel_pxp_cmd_interface_43.h | |
| | | |
| | } | |
| | Struture depends on command type | |
| | struct gsc_fw_specific_api_foobar { | |
| |_______________________________________| |
|________________________________________________|
That said, this patch provides basic helpers but leaves the
PXP subsystem (i.e. the caller) to handle (D) and everything
else such as input/output size verification or handling the
responses from security firmware (for example, requiring a retry).
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-4-alan.previn.teres.alexis@intel.com
Alan Previn [Thu, 11 May 2023 23:17:32 +0000 (16:17 -0700)]
drm/i915/pxp: Add MTL hw-plumbing enabling for KCR operation
Add MTL hw-plumbing enabling for KCR operation under PXP
which includes:
1. Updating 'pick-gt' to get the media tile for
KCR interrupt handling
2. Adding MTL's KCR registers for PXP operation
(init, status-checking, etc.).
While doing #2, lets create a separate registers header file for PXP
to be consistent with other i915 global subsystems.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-3-alan.previn.teres.alexis@intel.com
Alan Previn [Thu, 11 May 2023 23:17:31 +0000 (16:17 -0700)]
drm/i915/pxp: Add GSC-CS back-end resource init and cleanup
For MTL, the PXP back-end transport uses the GSC engine to submit
HECI packets through the HW to the GSC firmware for PXP arb
session management. This submission uses a non-priveleged
batch buffer, a buffer for the command packet and of course
a context targeting the GSC-CS.
Thus for MTL, we need to allocate and free a set of execution
submission resources for the management of the arbitration session.
Lets start with the context creation first since that object and
its usage is very straight-forward. We'll add the buffer allocation
and freeing later when we introduce the gsccs' send-message function.
Do this one time allocation of gsccs specific resources in
a new gsccs source file with intel_pxp_gsccs_init / fini functions
and hook them up from the PXP front-end.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-2-alan.previn.teres.alexis@intel.com
Fei Yang [Tue, 9 May 2023 16:52:00 +0000 (09:52 -0700)]
drm/i915: use pat_index instead of cache_level
Currently the KMD is using enum i915_cache_level to set caching policy for
buffer objects. This is flaky because the PAT index which really controls
the caching behavior in PTE has far more levels than what's defined in the
enum. In addition, the PAT index is platform dependent, having to translate
between i915_cache_level and PAT index is not reliable, and makes the code
more complicated.
From UMD's perspective there is also a necessity to set caching policy for
performance fine tuning. It's much easier for the UMD to directly use PAT
index because the behavior of each PAT index is clearly defined in Bspec.
Having the abstracted i915_cache_level sitting in between would only cause
more ambiguity. PAT is expected to work much like MOCS already works today,
and by design userspace is expected to select the index that exactly
matches the desired behavior described in the hardware specification.
For these reasons this patch replaces i915_cache_level with PAT index. Also
note, the cache_level is not completely removed yet, because the KMD still
has the need of creating buffer objects with simple cache settings such as
cached, uncached, or writethrough. For kernel objects, cache_level is used
for simplicity and backward compatibility. For Pre-gen12 platforms PAT can
have 1:1 mapping to i915_cache_level, so these two are interchangeable. see
the use of LEGACY_CACHELEVEL.
One consequence of this change is that gen8_pte_encode is no longer working
for gen12 platforms due to the fact that gen12 platforms has different PAT
definitions. In the meantime the mtl_pte_encode introduced specfically for
MTL becomes generic for all gen12 platforms. This patch renames the MTL
PTE encode function into gen12_pte_encode and apply it to all gen12. Even
though this change looks unrelated, but separating them would temporarily
break gen12 PTE encoding, thus squash them in one patch.
Special note: this patch changes the way caching behavior is controlled in
the sense that some objects are left to be managed by userspace. For such
objects we need to be careful not to change the userspace settings.There
are kerneldoc and comments added around obj->cache_coherent, cache_dirty,
and how to bypass the checkings by i915_gem_object_has_cache_level. For
full understanding, these changes need to be looked at together with the
two follow-up patches, one disables the {set|get}_caching ioctl's and the
other adds set_pat extension to the GEM_CREATE uAPI.
Bspec: 63019
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230509165200.1740-3-fei.yang@intel.com
Fei Yang [Tue, 9 May 2023 16:51:59 +0000 (09:51 -0700)]
drm/i915: preparation for using PAT index
This patch is a preparation for replacing enum i915_cache_level with PAT
index. Caching policy for buffer objects is set through the PAT index in
PTE, the old i915_cache_level is not sufficient to represent all caching
modes supported by the hardware.
Preparing the transition by adding some platform dependent data structures
and helper functions to translate the cache_level to pat_index.
cachelevel_to_pat: a platform dependent array mapping cache_level to
pat_index.
max_pat_index: the maximum PAT index recommended in hardware specification
Needed for validating the PAT index passed in from user
space.
i915_gem_get_pat_index: function to convert cache_level to PAT index.
obj_to_i915(obj): macro moved to header file for wider usage.
I915_MAX_CACHE_LEVEL: upper bound of i915_cache_level for the
convenience of coding.
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230509165200.1740-2-fei.yang@intel.com
Radhakrishna Sripada [Fri, 5 May 2023 23:45:44 +0000 (16:45 -0700)]
drm/i915/mtl: Fix the wa number for Wa_22016670082
Fixes the right lineage number for the workaround.
Fixes:
a7fa1537b791 ("drm/i915/mtl: Implement Wa_14019141245")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230505234544.4029535-1-radhakrishna.sripada@intel.com
Clint Taylor [Fri, 5 May 2023 14:40:05 +0000 (16:40 +0200)]
drm/i915/mtl: Add MTL for remapping CCS FBs
Add support for remapping CCS FBs on MTL to remove the restriction
of the power-of-two sized stride and the 2MB surface offset alignment
for these FBs.
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230505144005.23480-2-nirmoy.das@intel.com
Pallavi Mishra [Fri, 5 May 2023 14:40:04 +0000 (16:40 +0200)]
drm/i915/mtl: Drop FLAT CCS check
Remove FLAT CCS check from XY_FAST_COLOR_BLT usage, thus
enabling MTL to use it.
Signed-off-by: Pallavi Mishra <pallavi.mishra@intel.com>
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230505144005.23480-1-nirmoy.das@intel.com
John Harrison [Tue, 2 May 2023 23:40:07 +0000 (16:40 -0700)]
drm/i915/uc: Make unexpected firmware versions an error in debug builds
If the DEBUG_GEM config option is set then escalate the 'unexpected
firmware version' message from a notice to an error. This will ensure
that the CI system treats such occurences as a failure and logs a bug
about it (or fails the pre-merge testing).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502234007.1762014-7-John.C.Harrison@Intel.com
John Harrison [Tue, 2 May 2023 23:40:06 +0000 (16:40 -0700)]
drm/i915/uc: Reject duplicate entries in firmware table
It was noticed that duplicate entries in the firmware table could cause
an infinite loop in the firmware loading code if that entry failed to
load. Duplicate entries are a bug anyway and so should never happen.
Ensure they don't by tweaking the table validation code to reject
duplicates.
For full m/m/p files, that can be done by simply tweaking the patch
level check to reject matching values. For reduced version entries,
the filename itself must be compared.
v2: Improve comment (review by Daniele)
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502234007.1762014-6-John.C.Harrison@Intel.com
John Harrison [Tue, 2 May 2023 23:40:05 +0000 (16:40 -0700)]
drm/i915/uc: Enhancements to firmware table validation
The validation of the firmware table was being done inside the code
for scanning the table for the next available firmware blob. Which is
unnecessary. So pull it out into a separate function that is only
called once per blob type at init time.
Also, drop the CONFIG_SELFTEST requirement and make errors terminal.
It was mentioned that potential issues with backports would not be
caught by regular pre-merge CI as that only occurs on tip not stable
branches. Making the validation unconditional and failing driver load
on detecting of a problem ensures that such backports will also be
validated correctly.
This requires adding a firmware global flag to indicate an issue with
any of the per firmware tables. This is done rather than adding a new
state enum as a new enum value would be a much more invasive change -
lots of places would need updating to support the new error state.
Note also that this change means that a table error will cause the
driver to wedge even on platforms that don't require firmware files.
This is intentional as per the above backport concern - someone doing
backports is not guaranteed to test on every platform that they may
potential affect. So forcing a failure on all platforms ensures that
the problem will be noticed and corrected immediately.
v2: Change to unconditionally fail module load on a validation error
(review feedback/discussion with Daniele).
v3: Add a new flag to track table validation errors (review
feedback/discussion with Daniele).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502234007.1762014-5-John.C.Harrison@Intel.com
John Harrison [Tue, 2 May 2023 23:40:03 +0000 (16:40 -0700)]
drm/i915/guc: Print status register when waiting for GuC to load
If the GuC load is taking an excessively long time, the wait loop
currently prints the GT frequency. Extend that to include the GuC
status as well so we can see if the GuC is actually making progress or
not.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502234007.1762014-3-John.C.Harrison@Intel.com
John Harrison [Tue, 2 May 2023 23:40:02 +0000 (16:40 -0700)]
drm/i915/guc: Decode another GuC load failure case
Explain another potential firmware failure mode and early exit the
long wait if hit.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502234007.1762014-2-John.C.Harrison@Intel.com
John Harrison [Thu, 4 May 2023 20:22:52 +0000 (13:22 -0700)]
drm/i915/mtl: Define GuC firmware version for MTL
First release of GuC for Meteorlake.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504202252.1104212-3-John.C.Harrison@Intel.com
John Harrison [Thu, 4 May 2023 20:22:51 +0000 (13:22 -0700)]
drm/i915/uc: Track patch level versions on reduced version firmware files
When reduced version firmware files were added (matching major
component being the only strict requirement), the minor version was
still tracked and a notification reported if it was older. However,
the patch version should really be tracked as well for the same
reasons. The KMD can work without the change but if the effort has
been taken to release a new firmware with the change then there must
be a valid reason for doing so - important bug fix, security fix, etc.
And in that case it would be good to alert the user if they are
missing out on that new fix.
v2: Use correct patch version number and drop redunant debug print
(review by Daniele / CI results).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504202252.1104212-2-John.C.Harrison@Intel.com
Jani Nikula [Tue, 2 May 2023 15:37:41 +0000 (18:37 +0300)]
drm/i915: use kernel-doc -Werror when CONFIG_DRM_I915_WERROR=y
With CONFIG_DRM_I915_WERROR=y, we enable kernel-doc check for both
objects and headers. Now that the kernel-doc warnings have been fixed,
also enable kernel-doc -Werror to fail the build on kernel-doc warnings.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/68ffcad0e6ff2b6cd70c6df28822f967898ce197.1683041799.git.jani.nikula@intel.com
Jani Nikula [Thu, 4 May 2023 09:23:20 +0000 (12:23 +0300)]
drm/i915/ttm: fix i915_ttm_to_gem() kernel-doc
drivers/gpu/drm/i915/gem/i915_gem_ttm.h:50: warning: Function parameter or member 'bo' not described in 'i915_ttm_to_gem'
v2: Fix return value documentation while at it (Rodrigo)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504092320.1787627-1-jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:39 +0000 (18:37 +0300)]
drm/i915/scatterlist: fix kernel-doc
Can't document function pointer members as if they are functions.
drivers/gpu/drm/i915/i915_scatterlist.h:160: warning: Incorrect use of kernel-doc format: * release() - Free the memory of the struct i915_refct_sgt
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a0c099707ec4f1911b14b0f286848a298b2b29e0.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:27 +0000 (18:37 +0300)]
drm/i915/gem: fix function pointer member kernel-doc
You can't document function pointer member as functions.
drivers/gpu/drm/i915/gem/i915_gem_region.h:25: warning: Incorrect use of kernel-doc format: * process_obj - Process the current object
drivers/gpu/drm/i915/gem/i915_gem_region.h:35: warning: Function parameter or member 'process_obj' not described in 'i915_gem_apply_to_region_ops'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a2a81f9ee78591def0534c81a63dbc652c44bbd3.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:22 +0000 (18:37 +0300)]
drm/i915/vma: fix struct i915_vma_bindinfo kernel-doc
You can't document both a sub-struct type and a struct member at the
same time. Separate them.
drivers/gpu/drm/i915/i915_vma_resource.h:91: warning: Incorrect use of kernel-doc format: * struct i915_vma_bindinfo - Information needed for async bind
drivers/gpu/drm/i915/i915_vma_resource.h:129: warning: Function parameter or member 'bi' not described in 'i915_vma_resource'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/89ab5cf179566c429383cc57db746038f75cba0d.1683041799.git.jani.nikula@intel.com
Daniele Ceraolo Spurio [Tue, 2 May 2023 16:38:54 +0000 (09:38 -0700)]
drm/i915/gsc: add support for GSC proxy interrupt
The GSC notifies us of a proxy request via the HECI2 interrupt. The
interrupt must be enabled both in the HECI layer and in our usual gt irq
programming; for the latter, the interrupt is enabled via the same enable
register as the GSC CS, but it does have its own mask register. When the
interrupt is received, we also need to de-assert it in both layers.
The handling of the proxy request is deferred to the same worker that we
use for GSC load. New flags have been added to distinguish between the
init case and the proxy interrupt.
v2: Make sure not to set the reset bit when enabling/disabling the GSC
interrupts, fix defines (Alan)
v3: rebase on proxy status register check
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502163854.317653-5-daniele.ceraolospurio@intel.com
Daniele Ceraolo Spurio [Tue, 2 May 2023 16:38:53 +0000 (09:38 -0700)]
drm/i915/gsc: add initial support for GSC proxy
The GSC uC needs to communicate with the CSME to perform certain
operations. Since the GSC can't perform this communication directly
on platforms where it is integrated in GT, i915 needs to transfer the
messages from GSC to CSME and back.
The proxy flow is as follow:
1 - i915 submits a request to GSC asking for the message to CSME
2 - GSC replies with the proxy header + payload for CSME
3 - i915 sends the reply from GSC as-is to CSME via the mei proxy
component
4 - CSME replies with the proxy header + payload for GSC
5 - i915 submits a request to GSC with the reply from CSME
6 - GSC replies either with a new header + payload (same as step 2,
so we restart from there) or with an end message.
After GSC load, i915 is expected to start the first proxy message chain,
while all subsequent ones will be triggered by the GSC via interrupt.
To communicate with the CSME, we use a dedicated mei component, which
means that we need to wait for it to bind before we can initialize the
proxies. This usually happens quite fast, but given that there is a
chance that we'll have to wait a few seconds the GSC work has been moved
to a dedicated WQ to not stall other processes.
v2: fix code style, includes and variable naming (Alan)
v3: add extra check for proxy status, fix includes and comments
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502163854.317653-4-daniele.ceraolospurio@intel.com
Alexander Usyskin [Tue, 2 May 2023 16:38:52 +0000 (09:38 -0700)]
mei: gsc_proxy: add gsc proxy driver
Add GSC proxy driver. It to allows messaging between GSC component
on Intel graphics card and CSE device.
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502163854.317653-3-daniele.ceraolospurio@intel.com
Alexander Usyskin [Tue, 2 May 2023 16:38:51 +0000 (09:38 -0700)]
drm/i915/mtl: Define GSC Proxy component interface
GSC Proxy component is used for communication between the
Intel graphics driver and MEI driver.
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502163854.317653-2-daniele.ceraolospurio@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:40 +0000 (18:37 +0300)]
drm/i915/scatterlist: fix kernel-doc parameter documentation
drivers/gpu/drm/i915/i915_scatterlist.h:164: warning: Function parameter or member 'release' not described in 'i915_refct_sgt_ops'
drivers/gpu/drm/i915/i915_scatterlist.h:187: warning: Function parameter or member 'rsgt' not described in 'i915_refct_sgt_put'
drivers/gpu/drm/i915/i915_scatterlist.h:198: warning: Function parameter or member 'rsgt' not described in 'i915_refct_sgt_get'
drivers/gpu/drm/i915/i915_scatterlist.h:214: warning: Function parameter or member 'rsgt' not described in '__i915_refct_sgt_init'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0b31edbb33116c8002dd1e72d3ad25efe5dd0176.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:38 +0000 (18:37 +0300)]
drm/i915/pxp: fix kernel-doc for member dev_link
Add /** to make it a kernel-doc.
drivers/gpu/drm/i915/pxp/intel_pxp_types.h:96: warning: Function parameter or member 'dev_link' not described in 'intel_pxp'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/84f89a3332fa323888f1e3241fb51ae10417ecd7.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:37 +0000 (18:37 +0300)]
drm/i915/pmu: drop kernel-doc
The comments are closer to not being kernel-doc.
drivers/gpu/drm/i915/i915_pmu.h:21: warning: cannot understand function prototype: 'enum i915_pmu_tracked_events '
drivers/gpu/drm/i915/i915_pmu.h:32: warning: cannot understand function prototype: 'enum '
drivers/gpu/drm/i915/i915_pmu.h:41: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* How many different events we track in the global PMU mask.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7656b8f58b088c108a2a32f7089329740efabba1.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:36 +0000 (18:37 +0300)]
drm/i915/active: fix kernel-doc for function parameters
drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'active' not described in '__i915_active_fence_init'
drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'fence' not described in '__i915_active_fence_init'
drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'fn' not described in '__i915_active_fence_init'
drivers/gpu/drm/i915/i915_active.h:89: warning: Function parameter or member 'active' not described in 'i915_active_fence_set'
drivers/gpu/drm/i915/i915_active.h:89: warning: Function parameter or member 'rq' not described in 'i915_active_fence_set'
drivers/gpu/drm/i915/i915_active.h:102: warning: Function parameter or member 'active' not described in 'i915_active_fence_get'
drivers/gpu/drm/i915/i915_active.h:122: warning: Function parameter or member 'active' not described in 'i915_active_fence_isset'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7f201c6cb715e4b3cece78ffa893a75610ecd27d.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:35 +0000 (18:37 +0300)]
drm/i915/guc: add intel_guc_state_capture member docs for ads_null_cache and max_mmio_per_node
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:216: warning: Function parameter or member 'ads_null_cache' not described in 'intel_guc_state_capture'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:216: warning: Function parameter or member 'max_mmio_per_node' not described in 'intel_guc_state_capture'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c83878163221ed3684a6de5d5e1c5373ddd5c06f.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:34 +0000 (18:37 +0300)]
drm/i915/guc: drop lots of kernel-doc markers
The documentation is closer to not being kernel-doc, so just drop the
kernel-doc markers.
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'size' not described in '__guc_capture_bufstate'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'data' not described in '__guc_capture_bufstate'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'rd' not described in '__guc_capture_bufstate'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'wr' not described in '__guc_capture_bufstate'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'link' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'is_partial' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'eng_class' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'eng_inst' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'guc_id' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'lrca' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'reginfo' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:62: warning: wrong kernel-doc identifier on line:
* struct guc_debug_capture_list_header / struct guc_debug_capture_list
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:80: warning: wrong kernel-doc identifier on line:
* struct __guc_mmio_reg_descr / struct __guc_mmio_reg_descr_group
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:105: warning: wrong kernel-doc identifier on line:
* struct guc_state_capture_header_t / struct guc_state_capture_t /
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'is_valid' not described in '__guc_capture_ads_cache'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'ptr' not described in '__guc_capture_ads_cache'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'size' not described in '__guc_capture_ads_cache'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'status' not described in '__guc_capture_ads_cache'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'marker' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'read_ptr' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'write_ptr' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'size' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'sampled_write_ptr' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'wrap_offset' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'flush_to_file' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'buffer_full_cnt' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'reserved' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'flags' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'version' not described in 'guc_log_buffer_state'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9c210d53fdbd6da5fac42e435855d269504919d7.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:33 +0000 (18:37 +0300)]
drm/i915/guc: add dbgfs_node member kernel-doc
drivers/gpu/drm/i915/gt/uc/intel_guc.h:274: warning: Function parameter or member 'dbgfs_node' not described in 'intel_guc'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b0f681dd82289dd86da78c6242411e8d812e51a1.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:32 +0000 (18:37 +0300)]
drm/i915/engine: hide preempt_hang selftest member from kernel-doc
drivers/gpu/drm/i915/gt/intel_engine_types.h:293: warning: Function parameter or member 'preempt_hang' not described in 'intel_engine_execlists'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/dafd771bb75cf14965dd3b666987c58a438de134.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:31 +0000 (18:37 +0300)]
drm/i915/gtt: fix i915_vm_resv_put() kernel-doc parameter name
drivers/gpu/drm/i915/gt/intel_gtt.h:515: warning: Function parameter or member 'vm' not described in 'i915_vm_resv_put'
drivers/gpu/drm/i915/gt/intel_gtt.h:515: warning: Excess function parameter 'resv' description in 'i915_vm_resv_put'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c22e58e770019667980b3617f6e963b76d7e79a7.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:30 +0000 (18:37 +0300)]
drm/i915/context: fix kernel-doc parameter descriptions
drivers/gpu/drm/i915/gt/intel_context.h:108: warning: Function parameter or member 'ce' not described in 'intel_context_lock_pinned'
drivers/gpu/drm/i915/gt/intel_context.h:123: warning: Function parameter or member 'ce' not described in 'intel_context_is_pinned'
drivers/gpu/drm/i915/gt/intel_context.h:142: warning: Function parameter or member 'ce' not described in 'intel_context_unlock_pinned'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8359a1cef6b5ab268a9dcc1a382281b6e39cfa64.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:29 +0000 (18:37 +0300)]
drm/i915/engine: fix kernel-doc function name for intel_engine_cleanup_common()
drivers/gpu/drm/i915/gt/intel_engine_cs.c:1525: warning: expecting prototype for intel_engines_cleanup_common(). Prototype was for intel_engine_cleanup_common() instead
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/33f8dfdf38be3e16675971e6983e3e300d4301a6.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:26 +0000 (18:37 +0300)]
drm/i915/gem: fix i915_gem_object_lookup_rcu() kernel-doc parameter name
drivers/gpu/drm/i915/gem/i915_gem_object.h:94: warning: Function parameter or member 'file' not described in 'i915_gem_object_lookup_rcu'
drivers/gpu/drm/i915/gem/i915_gem_object.h:94: warning: Excess function parameter 'filp' description in 'i915_gem_object_lookup_rcu'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/80c96863b7a0755aaa07efb49bcccd9ba620c6d7.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:25 +0000 (18:37 +0300)]
drm/i915/request: drop kernel-doc
The documentation is closer to not being kernel-doc. Just drop the
kernel-doc /** indicators.
drivers/gpu/drm/i915/i915_request.h:176: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Request queue structure.
drivers/gpu/drm/i915/i915_request.h:477: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Returns true if seq1 is later than seq2.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/62a7a0f6e5b33e59ef4339304d01e7ef7ee04430.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:24 +0000 (18:37 +0300)]
drm/i915/error: fix i915_capture_error_state() kernel-doc
drivers/gpu/drm/i915/i915_gpu_error.c:2174: warning: Function parameter or member 'dump_flags' not described in 'i915_capture_error_state'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20524292b002800975d82d23b5bd47da878f1733.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:23 +0000 (18:37 +0300)]
drm/i915/perf: fix i915_perf_ioctl_version() kernel-doc
drivers/gpu/drm/i915/i915_perf.c:5307: warning: Function parameter or member 'i915' not described in 'i915_perf_ioctl_version'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b93ddb95a15d1376936349b32c7facb35c76be82.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:21 +0000 (18:37 +0300)]
drm/i915/vma: document struct i915_vma_resource wakeref member
drivers/gpu/drm/i915/i915_vma_resource.h:129: warning: Function parameter or member 'wakeref' not described in 'i915_vma_resource'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/50389365e095dc564ab5f1f1e3647934163ffefa.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:20 +0000 (18:37 +0300)]
drm/i915/utils: drop kernel-doc from __wait_for()
The parameters aren't documented, and the file isn't included in Sphinx
build anyway, so demote the kernel-doc to a regular comment.
drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'OP' not described in '__wait_for'
drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'COND' not described in '__wait_for'
drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'US' not described in '__wait_for'
drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'Wmin' not described in '__wait_for'
drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'Wmax' not described in '__wait_for'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e6e33a7f03c4a78739fa96e6ae74eb272ae147e7.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:19 +0000 (18:37 +0300)]
drm/i915/vma: fix kernel-doc function name for i915_vma_size()
drivers/gpu/drm/i915/i915_vma.h:145: warning: expecting prototype for i915_vma_offset(). Prototype was for i915_vma_size() instead
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9fd58398ba6f86c55cc7a7c62efeab70c3311d59.1683041799.git.jani.nikula@intel.com
Jani Nikula [Tue, 2 May 2023 15:37:18 +0000 (18:37 +0300)]
drm/i915/gvt: fix intel_vgpu_alloc_resource() kernel-doc parameter
drivers/gpu/drm/i915/gvt/aperture_gm.c:344: warning: Function parameter or member 'conf' not described in 'intel_vgpu_alloc_resource'
drivers/gpu/drm/i915/gvt/aperture_gm.c:344: warning: Excess function parameter 'param' description in 'intel_vgpu_alloc_resource'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9213214c9caa296ebd349a5d5b44c2bbb45cdf99.1683041799.git.jani.nikula@intel.com
John Harrison [Fri, 28 Apr 2023 18:56:36 +0000 (11:56 -0700)]
drm/i915/guc: Fix error capture for virtual engines
GuC based register dumps in error capture logs were basically broken
for virtual engines. This can be seen in igt@gem_exec_balancer@hang:
[IGT] gem_exec_balancer: starting subtest hang
[drm] GPU HANG: ecode 12:4:
e1524110, in gem_exec_balanc [6388]
[drm] GT0: GUC: No register capture node found for 0x1005 / 0xFEDC311D
[drm] GPU HANG: ecode 12:4:
00000000, in gem_exec_balanc [6388]
[IGT] gem_exec_balancer: exiting, ret=0
The test causes a hang on both engines of a virtual engine context.
The engine instance zero hang gets a valid error capture but the
non-instance-zero hang does not.
Fix that by scanning through the list of pending register captures
when a hang notification for a virtual engine is received. That way,
the hang can be assigned to the correct physical engine prior to
starting the error capture process. So later on, when the error capture
handler tries to find the engine register list, it looks for one on
the correct engine.
Also, sneak in a missing blank line before a comment in the node
search code.
v2: Fix null pointer deref on non-GuC platforms.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428185636.457407-5-John.C.Harrison@Intel.com
John Harrison [Fri, 28 Apr 2023 18:56:35 +0000 (11:56 -0700)]
drm/i915/guc: Capture list naming clean up
Don't use 'xe_lp*' prefixes for register lists that are common with
Gen8.
Don't add Xe only GSC registers to pre-Xe devices that don't
even have a GSC engine.
Fix Xe_LP name.
Don't use GEN9 as a prefix for register lists that contain all GEN8
registers.
Rename the 'default_' register list prefix to 'gen8_' as that is the
more accurate name.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428185636.457407-4-John.C.Harrison@Intel.com
John Harrison [Fri, 28 Apr 2023 18:56:34 +0000 (11:56 -0700)]
drm/i915/guc: Consolidate duplicated capture list code
Remove 99% duplicated steered register list code. Also, include the
pre-Xe steered registers in the pre-Xe list generation.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428185636.457407-3-John.C.Harrison@Intel.com
John Harrison [Fri, 28 Apr 2023 18:56:33 +0000 (11:56 -0700)]
drm/i915/guc: Don't capture Gen8 regs on Xe devices
A pair of pre-Xe registers were being included in the Xe capture list.
GuC was rejecting those as being invalid and logging errors about
them. So, stop doing it.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Fixes:
dce2bd542337 ("drm/i915/guc: Add Gen9 registers for GuC error state capture.")
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428185636.457407-2-John.C.Harrison@Intel.com
Tejas Upadhyay [Fri, 28 Apr 2023 12:59:52 +0000 (18:29 +0530)]
drm/i915/selftests: Use gt_err for GT info
It will be more informative regarding
GT if we use gt_err instead.
Cc: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428125952.4037964-3-tejas.upadhyay@intel.com
Tejas Upadhyay [Fri, 28 Apr 2023 12:59:51 +0000 (18:29 +0530)]
drm/i915/gt: Use gt_err for GT info
It will be more informative regarding
GT if we use gt_err instead.
Cc: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428125952.4037964-2-tejas.upadhyay@intel.com
Umesh Nerlige Ramappa [Thu, 27 Apr 2023 22:47:05 +0000 (15:47 -0700)]
drm/i915/fdinfo: Enable fdinfo for GuC backends
Enable fdinfo for GuC based platforms with the exception that long
running contexts will not provide reliable busyness data unless they
switch out at some reasonable point in time.
Link: https://gitlab.freedesktop.org/drm/intel/issues/8303
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427224705.2785566-3-umesh.nerlige.ramappa@intel.com
Umesh Nerlige Ramappa [Thu, 27 Apr 2023 22:47:04 +0000 (15:47 -0700)]
i915/pmu: Add support for total context runtime for GuC back-end
GPU accumulates the context runtime in a 32 bit counter - CTX_TIMESTAMP
in the context image. This value is saved/restored on context switches.
KMD accumulates these values into a 64 bit counter taking care of any
overflows as needed. This count provides the basis for client specific
busyness in the fdinfo interface.
KMD accumulation happens just before the context is unpinned and when
context switches out. This works for execlist back-end since execlist
scheduling has visibility into context switches. With GuC mode, KMD does
not have visibility into context switches and this counter is
accumulated only when context is unpinned. Context is unpinned once the
context scheduling is successfully disabled. Disabling context
scheduling is an asynchronous operation. Also if a context is servicing
frequent requests, scheduling may never be disabled on it.
For GuC mode, since updates to the context runtime may be delayed, add
hooks to update the context runtime in a worker thread as well as when
a user queries for it.
Limitation:
- If a context is never switched out or runs for a long period of time,
the runtime value of CTX_TIMESTAMP may never be updated, so the
counter value may be unreliable. This patch does not support such
cases. Such support must be available from the GuC FW and it is WIP.
This patch is an extract from previous work authored by John/Umesh here -
https://patchwork.freedesktop.org/patch/496441/?series=105085&rev=4
v2: (Ashutosh)
- Drop COPS_RUNTIME_ACTIVE_TOTAL
- s/guc_context_update_clks/__guc_context_update_stats
- Pin context before accessing in guc_timestamp_ping
- In guc_context_unpin, use spinlock to serialize access to runtime stats
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Co-developed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427224705.2785566-2-umesh.nerlige.ramappa@intel.com
Jani Nikula [Fri, 21 Apr 2023 13:59:48 +0000 (16:59 +0300)]
drm/i915/rc6: throw out set() wrapper
Remove useless indirection that's just misdirection for the readers.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230421135948.2029121-1-jani.nikula@intel.com
Vinay Belgaumkar [Wed, 26 Apr 2023 00:39:42 +0000 (17:39 -0700)]
drm/i915/selftest: Update the SLPC selftest
Use the new efficient frequency toggling interface. Also
create a helper function to restore the frequencies after
the test is done.
v2: Restore max freq first and then min.
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230426003942.1924347-2-vinay.belgaumkar@intel.com
Vinay Belgaumkar [Wed, 26 Apr 2023 00:39:41 +0000 (17:39 -0700)]
drm/i915/guc/slpc: Provide sysfs for efficient freq
SLPC enables use of efficient freq at init by default. It is
possible for GuC to request frequencies that are higher than
the 'software' max if user has set it lower than the efficient
level.
Scenarios/tests that require strict fixing of freq below the efficient
level will need to disable it through this interface.
v2: Keep just one interface to toggle sysfs. With this, user will
be completely responsible for toggling efficient frequency if need
be. There will be no implicit disabling when user sets min < RP1 (Ashutosh)
v3: Remove unused label, review comments (Ashutosh)
v4: Toggle efficient freq usage in SLPC selftest and checkpatch fixes
v5: Review comments (Andi) and add a separate patch for selftest updates
Fixes:
95ccf312a1e4 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency")
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230426003942.1924347-1-vinay.belgaumkar@intel.com
Jonathan Cavitt [Wed, 26 Apr 2023 21:28:49 +0000 (23:28 +0200)]
drm/i915: Use correct huge page manager for MTL
MTL currently uses gen8_ppgtt_insert_huge when managing huge pages.
This is because MTL reports as not supporting 64K pages, or more
accurately, the system that reports whether a platform has 64K pages
reports false for MTL. This is only half correct, as the 64K page support
reporting system only cares about 64K page support for LMEM, which MTL
doesn't have.
MTL should be using xehpsdv_ppgtt_insert_huge. However, simply changing
over to using that manager doesn't resolve the issue because MTL is
expecting the virtual address space for the page table to be flushed after
initialization, so we must also add a flush statement there.
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230425-hugepage-migrate-v8-2-7868d54eaa27@intel.com
Jonathan Cavitt [Wed, 26 Apr 2023 21:28:48 +0000 (23:28 +0200)]
drm/i915: Migrate platform-dependent mock hugepage selftests to live
Convert the igt_mock_ppgtt_huge_fill and igt_mock_ppgtt_64K mock selftests
into live selftests as their requirements have recently become
platform-dependent. Additionally, apply necessary platform dependency
checks to these tests.
v8:
- handle properly 64K and 2M pages
v9:
- do not expect 64K pages if 2M are present
- fix hex printing
- obey commit message line limit
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Co-developed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230425-hugepage-migrate-v8-1-7868d54eaa27@intel.com
Radhakrishna Sripada [Tue, 25 Apr 2023 18:30:11 +0000 (11:30 -0700)]
drm/i915/mtl: Implement Wa_14019141245
Enable strict RAR to prevent spurious GPU hangs.
v1.1: Rebase
Bspec: 51762
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by:Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230425183011.865085-1-radhakrishna.sripada@intel.com
Ashutosh Dixit [Thu, 20 Apr 2023 16:40:41 +0000 (09:40 -0700)]
drm/i915/hwmon: Block waiting for GuC reset to complete
Instead of erroring out when GuC reset is in progress, block waiting for
GuC reset to complete which is a more reasonable uapi behavior.
v2: Avoid race between wake_up_all and waiting for wakeup (Rodrigo)
v3: Remove timeout when blocked (Tvrtko)
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420164041.1428455-4-ashutosh.dixit@intel.com
Ashutosh Dixit [Thu, 20 Apr 2023 16:40:40 +0000 (09:40 -0700)]
drm/i915/guc: Disable PL1 power limit when loading GuC firmware
On dGfx, the PL1 power limit being enabled and set to a low value results
in a low GPU operating freq. It also negates the freq raise operation which
is done before GuC firmware load. As a result GuC firmware load can time
out. Such timeouts were seen in the GL #8062 bug below (where the PL1 power
limit was enabled and set to a low value). Therefore disable the PL1 power
limit when allowed by HW when loading GuC firmware.
v2:
- Take mutex (to disallow writes to power1_max) across GuC reset/fw load
- Add hwm_power_max_restore to error return code path
v3 (Jani N):
- Add/remove explanatory comments
- Function renames
- Type corrections
- Locking annotation
v4:
- Don't hold the lock across GuC reset (Rodrigo)
- New locking scheme (suggested by Rodrigo)
- Eliminate rpm_get in power_max_disable/restore, not needed (Tvrtko)
v5:
- Fix uninitialized pl1en variable compile warning reported by kernel
build robot by creating new err_rps label
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8062
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420164041.1428455-3-ashutosh.dixit@intel.com
Ashutosh Dixit [Thu, 20 Apr 2023 16:40:39 +0000 (09:40 -0700)]
drm/i915/hwmon: Get mutex and rpm ref just once in hwm_power_max_write
In preparation for follow-on patches, refactor hwm_power_max_write to take
hwmon_lock and runtime pm wakeref at start of the function and release them
at the end, therefore acquiring these just once each.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420164041.1428455-2-ashutosh.dixit@intel.com
John Harrison [Fri, 21 Apr 2023 22:47:42 +0000 (15:47 -0700)]
drm/i915/guc: Actually return an error if GuC version range check fails
Dan Carpenter pointed out that 'err' was not being set in the case
where the GuC firmware version range check fails. Fix that.
Note that while this is a bug fix for a previous patch (see Fixes tag
below). It is an exceedingly low risk bug. The range check is
asserting that the GuC firmware version is within spec. So it should
not be possible to ever have a firmware file that fails this check. If
larger version numbers are required in the future, that would be a
backwards breaking spec change and thus require a major version bump,
in which case an old i915 driver would not load that new version anyway.
Fixes:
9bbba0667f37 ("drm/i915/guc: Use GuC submission API version number")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230421224742.2357198-1-John.C.Harrison@Intel.com
Tejas Upadhyay [Mon, 24 Apr 2023 10:17:49 +0000 (15:47 +0530)]
drm/i915/mtl: Add workaround
14018778641
WA
18018781329 is applicable now across all MTL
steppings.
V2:
- Remove IS_MTL check, code already running for MTL - Matt
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230424101749.3719600-1-tejas.upadhyay@intel.com
Tejas Upadhyay [Mon, 24 Apr 2023 13:36:07 +0000 (19:06 +0530)]
drm/i915/selftest: Record GT error for gt failure
igt_live_test has pr_err dumped in case of some
GT failures. It will be more informative regarding
GT if we use gt_err instead.
Cc: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230424133607.3736825-1-tejas.upadhyay@intel.com
Fei Yang [Mon, 24 Apr 2023 18:29:02 +0000 (11:29 -0700)]
drm/i915/mtl: workaround coherency issue for Media
This patch implements Wa_22016122933.
In MTL, memory writes initiated by the Media tile update the whole
cache line, even for partial writes. This creates a coherency
problem for cacheable memory if both CPU and GPU are writing data
to different locations within a single cache line.
This patch circumvents the issue by making CPU/GPU shared memory
uncacheable (WC on CPU side, and PAT index 2 for GPU). Additionally,
it ensures that CPU writes are visible to the GPU with an
intel_guc_write_barrier().
While fixing the CTB issue, we noticed some random GSC firmware
loading failure because the share buffers are cacheable (WB) on CPU
side but uncached on GPU side. To fix these issues we need to map
such shared buffers as WC on CPU side. Since such allocations are
not all done through GuC allocator, to avoid too many code changes,
the i915_coherent_map_type() is now hard coded to return WC for MTL.
v2: Simplify the commit message(Matt).
BSpec: 45101
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230424182902.3663500-3-fei.yang@intel.com
Fei Yang [Mon, 24 Apr 2023 18:29:01 +0000 (11:29 -0700)]
drm/i915/mtl: Add PTE encode function
PTE encode functions are platform dependent. This patch implements
PTE functions for MTL, and ensures the correct PTE encode function
is used by calling pte_encode function pointer instead of the
hardcoded gen8 version of PTE encode.
Fixes:
b76c0deef627 ("drm/i915/mtl: Define MOCS and PAT tables for MTL")
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230424182902.3663500-2-fei.yang@intel.com
Andi Shyti [Fri, 21 Apr 2023 19:00:26 +0000 (21:00 +0200)]
drm/i915/i915_drv: Use i915 instead of dev_priv insied the file_priv structure
In the process of renaming all instances of 'dev_priv' to 'i915',
start using 'i915' within the i915_drv.h file.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230421190026.294208-3-andi.shyti@linux.intel.com
Andi Shyti [Fri, 21 Apr 2023 19:00:25 +0000 (21:00 +0200)]
drm/i915/i915_drv: Use proper parameter naming in for_each_engine()
for_each_engine() loops through engines in the GT, not in
dev_priv. Because it's misleading, call it "gt__" instead of
"dev_priv__".
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230421190026.294208-2-andi.shyti@linux.intel.com
Fei Yang [Fri, 21 Apr 2023 18:25:35 +0000 (20:25 +0200)]
drm/i915/mtl: fix mocs selftest
Media GT has a different base for MOCS register, need to apply
gsi_offset to the mmio address if not using the intel_uncore_r/w
functions for register access.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230421182535.292670-3-andi.shyti@linux.intel.com
Madhumitha Tolakanahalli Pradeep [Fri, 21 Apr 2023 18:25:34 +0000 (20:25 +0200)]
drm/i915/mtl: Define MOCS and PAT tables for MTL
On MTL, GT can no longer allocate on LLC - only the CPU can.
This, along with programming new register bits that MTL
requires calls for a MOCS/PAT table update.
Also the PAT index registers are multicasted for primary GT,
and there is an address jump from index 7 to 8. This patch
makes sure that these registers are programmed in the proper
way.
BSpec: 44509, 45101, 44235
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230421182535.292670-2-andi.shyti@linux.intel.com
Fei Yang [Thu, 20 Apr 2023 10:23:49 +0000 (12:23 +0200)]
drm/i915/mtl: Set has_llc=0
On MTL, LLC is not shared between GT and CPU, set has_llc=0.
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420102349.15302-1-nirmoy.das@intel.com
Haridhar Kalvala [Tue, 18 Apr 2023 22:04:46 +0000 (15:04 -0700)]
drm/i915/mtl: WA to clear RDOP clock gating
Workaround implementation to clear RDOP clock gating.
Bspec: 66622
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418220446.2205509-5-radhakrishna.sripada@intel.com
Madhumitha Tolakanahalli Pradeep [Tue, 18 Apr 2023 22:04:45 +0000 (15:04 -0700)]
drm/i915/mtl: Extend Wa_22011802037 to MTL A-step
Wa_22011802037 was being applied to all graphics_ver 11 & 12. This patch
updates the if statement to apply the W/A to right platforms and extends
it to MTL-M:A step.
v1.1: Fix checkpatch warning.
v2: Change the check to reflect the wa at other places(Lucas)
Bspec: 66622
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418220446.2205509-4-radhakrishna.sripada@intel.com
Tejas Upadhyay [Wed, 19 Apr 2023 06:00:36 +0000 (11:30 +0530)]
drm/i915/selftests: Consider multi-gt instead of to_gt()
In order to enable complete multi-GT, loop through all
the GTs, rather than relying on the to_gt(), which only
provides a reference to the primary GT.
Problem appear when it runs on platform like MTL where
different set of engines are possible on different GTs.
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230419060036.3422635-4-tejas.upadhyay@intel.com
Tejas Upadhyay [Wed, 19 Apr 2023 06:00:35 +0000 (11:30 +0530)]
drm/i915/gem: Consider multi-gt instead of to_gt()
In order to enable complete multi-GT, use the GT
reference obtained directly from the engine, rather
than relying on the to_gt(), which only provides a
reference to the primary GT.
Problem appear when it runs on platform like MTL
where different set of engines are possible on
different GTs.
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230419060036.3422635-3-tejas.upadhyay@intel.com
Tejas Upadhyay [Wed, 19 Apr 2023 06:00:34 +0000 (11:30 +0530)]
drm/i915/gt: Consider multi-gt instead of to_gt()
In order to enable complete multi-GT, use the GT
reference obtained directly from the engine, rather
than relying on the to_gt(), which only provides a
reference to the primary GT.
Problem appear when it runs on platform like MTL
where different set of engines are possible on
different GTs.
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230419060036.3422635-2-tejas.upadhyay@intel.com
Andi Shyti [Mon, 17 Apr 2023 23:53:56 +0000 (01:53 +0200)]
drm/i915: Make IRQ reset and postinstall multi-gt aware
In multi-gt systems IRQs need to be reset and enabled per GT.
This might add some redundancy when handling interrupts for
engines that might not exist in every tile, but helps to keep the
code cleaner and more understandable.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417235356.1291060-1-andi.shyti@linux.intel.com
Cong Liu [Fri, 14 Apr 2023 22:41:09 +0000 (00:41 +0200)]
drm/i915: Fix memory leaks in i915 selftests
This patch fixes memory leaks on error escapes in function fake_get_pages
Fixes:
c3bfba9a2225 ("drm/i915: Check for integer truncation on scatterlist creation")
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230414224109.1051922-1-andi.shyti@linux.intel.com
Lucas De Marchi [Thu, 13 Apr 2023 20:03:49 +0000 (13:03 -0700)]
drm/i915/gt: Avoid out-of-bounds access when loading HuC
When HuC is loaded by GSC, there is no header definition for the kernel
to look at and firmware is just handed to GSC. However when reading the
version, it should still check the size of the blob to guarantee it's not
incurring into out-of-bounds array access.
If firmware is smaller than expected, the following message is now
printed:
# echo boom > /lib/firmware/i915/dg2_huc_gsc.bin
# dmesg | grep -i huc
[drm] GT0: HuC firmware i915/dg2_huc_gsc.bin: invalid size: 5 < 184
[drm] *ERROR* GT0: HuC firmware i915/dg2_huc_gsc.bin: fetch failed -ENODATA
...
Even without this change the size, header and signature are still
checked by GSC when loading, so this only avoids the out-of-bounds array
access.
Fixes:
a7b516bd981f ("drm/i915/huc: Add fetch support for gsc-loaded HuC binary")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413200349.3492571-1-lucas.demarchi@intel.com
Nirmoy Das [Tue, 4 Apr 2023 18:13:42 +0000 (20:13 +0200)]
drm/i915/mtl: Disable stolen memory backed FB for A0
Stolen memory is not usable for MTL A0 stepping beyond
certain access size and we have no control over userspace
access size of /dev/fb which can be backed by stolen memory.
So disable stolen memory backed fb by setting i915->dsm.usable_size
to zero.
v2: remove hsdes reference and fix commit message(Andi)
v3: use revid as we want to target SOC stepping(Radhakrishna)
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404181342.23362-1-nirmoy.das@intel.com
Joonas Lahtinen [Tue, 11 Apr 2023 12:43:45 +0000 (15:43 +0300)]
Merge drm/drm-next into drm-intel-gt-next
Need to pull in commit from drm-next (earlier in drm-intel-next):
1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")
In order to merge following patch to drm-intel-gt-next:
https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Daniel Vetter [Tue, 11 Apr 2023 10:28:09 +0000 (12:28 +0200)]
Merge tag 'mediatek-drm-next-6.4' of https://git./linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.4
1. Add support for 10-bit overlays
2. Add MediaTek SoC DRM (vdosys1) support for mt8195
3. Change mmsys compatible for mt8195 mediatek-drm
4. Only trigger DRM HPD events if bridge is attached
5. Change the aux retries times when receiving AUX_DEFER
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230410233005.2572-1-chunkuang.hu@kernel.org
Daniel Vetter [Tue, 11 Apr 2023 10:11:32 +0000 (12:11 +0200)]
Merge tag 'drm-msm-next-2023-04-10' of https://gitlab.freedesktop.org/drm/msm into drm-next
main pull request for v6.4
Core Display:
============
* Bugfixes for error handling during probe
* rework UBWC decoder programming
* prepare_commit cleanup
* bindings for SM8550 (MDSS, DPU), SM8450 (DP)
* timeout calculation fixup
* atomic: use drm_crtc_next_vblank_start() instead of our own
custom thing to calculate the start of next vblank
DP:
==
* interrupts cleanup
DPU:
===
* DSPP sub-block flush on sc7280
* support AR30 in addition to XR30 format
* Allow using REC_0 and REC_1 to handle wide (4k) RGB planes
* Split the HW catalog into individual per-SoC files
DSI:
===
* rework DSI instance ID detection on obscure platforms
GPU:
===
* uapi C++ compatibility fix
* a6xx: More robust gdsc reset
* a3xx and a4xx devfreq support
* update generated headers
* various cleanups and fixes
* GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
* dma-fence deadline hint support and wait-boost
* a640 speedbin support
* a650 speedbin support
Conflicts in drivers/gpu/drm/msm/adreno/adreno_gpu.c:
Conflict between the
7fa5047a436b ("drm: Use of_property_present() for
testing DT property presence") and
9f251f934012 ("drm/msm/adreno: Use
OPP for every GPU generation"). The latter removed the of_ function
call outright, so I went with what's in the PR unchanged.
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvwuj5tabyW910+N-B=5kFNAC7QNYoQ=0xi3roBjQvFFQ@mail.gmail.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Tue, 11 Apr 2023 10:02:38 +0000 (12:02 +0200)]
Merge tag 'drm-habanalabs-next-2023-04-10' of https://git./linux/kernel/git/ogabbay/linux into drm-next
This tag contains additional habanalabs driver changes for v6.4:
- uAPI changes:
- Add a definition of a new Gaudi2 server type. This is used by userspace
to know what is the connectivity between the accelerators inside the
server
- New features and improvements:
- speedup h/w queues test in Gaudi2 to reduce device initialization times.
- Firmware related fixes:
- Fixes to the handshake protocol during f/w initialization.
- Sync f/w events interrupt in hard reset to avoid warning message.
- Improvements to extraction of the firmware version.
- Misc bug fixes and code cleanups. Notable fixes are:
- Multiple fixes for interrupt handling in Gaudi2.
- Unmap mapped memory in case TLB invalidation fails.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230410124637.GA2441888@ogabbay-vm-u20.habana-labs.com
Tomer Tayar [Sun, 2 Apr 2023 10:42:35 +0000 (13:42 +0300)]
accel/habanalabs: add missing error flow in hl_sysfs_init()
hl_sysfs_fini() is called only if hl_sysfs_init() completes
successfully. Therefore if hl_sysfs_init() fails, need to remove any
sysfs group that was added until that point.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Moti Haimovski [Mon, 20 Mar 2023 20:59:11 +0000 (22:59 +0200)]
accel/habanalabs: speedup h/w queues test in Gaudi2
HW queues testing at driver load and after reset takes a substantial
amount of time.
This commit reduces the queues test time in Gaudi2 devices by running
all the tests in parallel instead of one after the other.
Time measurements on tests duration shows that the new method is almost
x100 faster than the serial approach.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Dani Liberman [Tue, 28 Mar 2023 17:41:35 +0000 (20:41 +0300)]
accel/habanalabs: fix handling of arc farm sei event
There is only single eq entry for arc farm sei event which aggregates
events from the four arc farms.
Fix the code to handle this event according to this behavior.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Ofir Bitton [Mon, 27 Mar 2023 10:40:56 +0000 (13:40 +0300)]
accel/habanalabs: remove Gaudi1 multi MSI code
Multi MSI interrupts aren't working in Gaudi1 and because of that,
we are only using a single MSI interrupt. Therefore, let's remove this
dead code in order to avoid confusion.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Oded Gabbay [Thu, 30 Mar 2023 09:30:56 +0000 (12:30 +0300)]
accel/habanalabs/uapi: new Gaudi2 server type
Add definition of a new Gaudi2 server type. This represents
the connectivity between the cards in that server type.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Ofir Bitton [Tue, 28 Mar 2023 07:59:43 +0000 (10:59 +0300)]
accel/habanalabs: fixes for unexpected error interrupt
Removing redundant asic prop variable as we don't need to expose this
to common code. In addition, fix some typos.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Koby Elbaz [Sun, 26 Mar 2023 15:22:57 +0000 (18:22 +0300)]
accel/habanalabs: don't wait for STS_OK after sending COMMS WFE
Sending COMMS_GOTO_WFE instructs the FW's CPU to halt (WFE state).
Once sent, FW's CPU isn't expected to continue communicating with LKD.
Therefore, the stage of waiting for COMMS_STS_OK should be skipped or
else waiting for COMMS_STS_OK will simply timeout, which will trigger
unexpected behavior.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Tal Cohen [Tue, 21 Mar 2023 08:59:28 +0000 (10:59 +0200)]
accel/habanalabs: sync f/w events interrupt in hard reset
Receiving events from FW, while the device is in hard reset, causes
a warning message in Driver log. The message may point to a
problem in the Driver or FW. But It also can appear as a result
of events that have been sent from FW just before the hard reset.
In order to avoid receiving events from FW while the device is in reset
and is already in 'disabled' mode, sync the f/w events interrupt right
before setting the device to 'disabled'.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Ofir Bitton [Sun, 26 Mar 2023 08:59:44 +0000 (11:59 +0300)]
accel/habanalabs: fix wrong reset and event flags
During event handling, driver sets relevant reset and user event
notifier flags. Fix few wrong flags settings.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Tomer Tayar [Sun, 26 Mar 2023 21:08:45 +0000 (00:08 +0300)]
accel/habanalabs: fix events mask of decoder abnormal interrupts
The decoder IRQ status register may have several set bits upon an
abnormal interrupt. Therefore, when setting the events mask, need to
check all bits and not using if-else.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Tomer Tayar [Sun, 26 Mar 2023 20:51:25 +0000 (23:51 +0300)]
accel/habanalabs: remove completion from abnormal interrupt work name
Decoder abnormal interrupts are for errors and not for completion, so
rename the relevant work and work function to not include 'completion'.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>