review.tizen.org Git - platform/kernel/linux-starfive.git/log

selftests: mptcp: remove duplicate include in mptcp_inq.c

'sys/ioctl.h' included in 'mptcp_inq.c' is duplicated.

Reported-by: ZealRobot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20211210071424.425773-1-ye.guojin@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

xfrm: add net device refcount tracker to struct xfrm_state_offload

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Link: https://lore.kernel.org/r/20211209154451.4184050-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-netns-refcount-tracking-base-series'

Eric Dumazet says:

====================
net: netns refcount tracking, base series

We have 100+ syzbot reports about netns being dismantled too soon,
still unresolved as of today.

We think a missing get_net() or an extra put_net() is the root cause.

In order to find the bug(s), and be able to spot future ones,
this patch adds CONFIG_NET_NS_REFCNT_TRACKER and new helpers
to precisely pair all put_net() with corresponding get_net().

To use these helpers, each data structure owning a refcount
should also use a "netns_tracker" to pair the get() and put().

Small sections of codes where the get()/put() are in sight
do not need to have a tracker, because they are short lived,
but in theory it is also possible to declare an on-stack tracker.

v2: Include core networking patches only.
====================

Link: https://lore.kernel.org/r/20211210074426.279563-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ppp: add netns refcount tracker

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

l2tp: add netns refcount tracker to l2tp_dfs_seq_data

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: sched: add netns refcount tracker to struct tcf_exts

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: add netns refcount tracker to struct seq_net_private

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: add netns refcount tracker to struct sock

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: add networking namespace refcount tracker

We have 100+ syzbot reports about netns being dismantled too soon,
still unresolved as of today.

We think a missing get_net() or an extra put_net() is the root cause.

In order to find the bug(s), and be able to spot future ones,
this patch adds CONFIG_NET_NS_REFCNT_TRACKER and new helpers
to precisely pair all put_net() with corresponding get_net().

To use these helpers, each data structure owning a refcount
should also use a "netns_tracker" to pair the get and put.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sh_eth: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/2576cc15bdbb5be636640f491bcc087a334e2c02.1638959463.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: x25: drop harmless check of !more

'more' is checked first. When !more is checked immediately after that,
it is always true. We should drop this check.

Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20211208024732.142541-5-sakiwit@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge git://git./linux/kernel/git/netdev/net

No conflicts.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

skbuff: Extract list pointers to silence compiler warnings

Under both -Warray-bounds and the object_size sanitizer, the compiler is
upset about accessing prev/next of sk_buff when the object it thinks it
is coming from is sk_buff_head. The warning is a false positive due to
the compiler taking a conservative approach, opting to warn at casting
time rather than access time.

However, in support of enabling -Warray-bounds globally (which has
found many real bugs), arrange things for sk_buff so that the compiler
can unambiguously see that there is no intention to access anything
except prev/next.  Introduce and cast to a separate struct sk_buff_list,
which contains _only_ the first two fields, silencing the warnings:

In file included from ./include/net/net_namespace.h:39,
                 from ./include/linux/netdevice.h:37,
                 from net/core/netpoll.c:17:
net/core/netpoll.c: In function 'refill_skbs':
./include/linux/skbuff.h:2086:9: warning: array subscript 'struct sk_buff[0]' is partly outside array bounds of 'struct sk_buff_head[1]' [-Warray-bounds]
2086 |         __skb_insert(newsk, next->prev, next, list);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/core/netpoll.c:49:28: note: while referencing 'skb_pool'
   49 | static struct sk_buff_head skb_pool;
      |                            ^~~~~~~~

This change results in no executable instruction differences.

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211207062758.2324338-1-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: prefer 1000baseT over 1000baseKX

The PHY settings table is supposed to be sorted by descending match
priority - in other words, earlier entries are preferred over later
entries.

The order of 1000baseKX/Full and 1000baseT/Full is such that we
prefer 1000baseKX/Full over 1000baseT/Full, but 1000baseKX/Full is
a lot rarer than 1000baseT/Full, and thus is much less likely to
be preferred.

This causes phylink problems - it means a fixed link specifying a
speed of 1G and full duplex gets an ethtool linkmode of 1000baseKX/Full
rather than 1000baseT/Full as would be expected - and since we offer
userspace a software emulation of a conventional copper PHY, we want
to offer copper modes in preference to anything else. However, we do
still want to allow the rarer modes as well.

Hence, let's reorder these two modes to prefer copper.

Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/E1muvFO-00F6jY-1K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

xfrm: use net device refcount tracker helpers

xfrm4_fill_dst() and xfrm6_fill_dst() build dst,
getting a device reference that will likely be released
by standard dst_release() code.

We have to track these references or risk a warning if
CONFIG_NET_DEV_REFCNT_TRACKER=y

Note to XFRM maintainers :

Error path in xfrm6_fill_dst() releases the reference,
but does not clear xdst->u.dst.dev, so I wonder
if this could lead to double dev_put() in some cases,
where a dst_release() _is_ called by the callers in their
error path.

This extra dev_put() was added in commit 84c4a9dfbf430 ("xfrm6:
release dev before returning error")

Fixes: 9038c320001d ("net: dst: add net device refcount tracking to dst_entry")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <amwang@redhat.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Link: https://lore.kernel.org/r/20211207193203.2706158-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-5.16-rc5' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and netfilter.

  Current release - regressions:

   - bpf, sockmap: re-evaluate proto ops when psock is removed from
     sockmap

  Current release - new code bugs:

   - bpf: fix bpf_check_mod_kfunc_call for built-in modules

   - ice: fixes for TC classifier offloads

   - vrf: don't run conntrack on vrf with !dflt qdisc

  Previous releases - regressions:

   - bpf: fix the off-by-two error in range markings

   - seg6: fix the iif in the IPv6 socket control block

   - devlink: fix netns refcount leak in devlink_nl_cmd_reload()

   - dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's"

   - dsa: mv88e6xxx: allow use of PHYs on CPU and DSA ports

  Previous releases - always broken:

   - ethtool: do not perform operations on net devices being
     unregistered

   - udp: use datalen to cap max gso segments

   - ice: fix races in stats collection

   - fec: only clear interrupt of handling queue in fec_enet_rx_queue()

   - m_can: pci: fix incorrect reference clock rate

   - m_can: disable and ignore ELO interrupt

   - mvpp2: fix XDP rx queues registering

  Misc:

   - treewide: add missing includes masked by cgroup -> bpf.h
     dependency"

* tag 'net-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
  net: dsa: mv88e6xxx: allow use of PHYs on CPU and DSA ports
  net: wwan: iosm: fixes unable to send AT command during mbim tx
  net: wwan: iosm: fixes net interface nonfunctional after fw flash
  net: wwan: iosm: fixes unnecessary doorbell send
  net: dsa: felix: Fix memory leak in felix_setup_mmio_filtering
  MAINTAINERS: s390/net: remove myself as maintainer
  net/sched: fq_pie: prevent dismantle issue
  net: mana: Fix memory leak in mana_hwc_create_wq
  seg6: fix the iif in the IPv6 socket control block
  nfp: Fix memory leak in nfp_cpp_area_cache_add()
  nfc: fix potential NULL pointer deref in nfc_genl_dump_ses_done
  nfc: fix segfault in nfc_genl_dump_devices_done
  udp: using datalen to cap max gso segments
  net: dsa: mv88e6xxx: error handling for serdes_power functions
  can: kvaser_usb: get CAN clock frequency from device
  can: kvaser_pciefd: kvaser_pciefd_rx_error_frame(): increase correct stats->{rx,tx}_errors counter
  net: mvpp2: fix XDP rx queues registering
  vmxnet3: fix minimum vectors alloc issue
  net, neigh: clear whole pneigh_entry at alloc time
  net: dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's"
  ...

Merge branch 'net-phylink-introduce-legacy-mode-flag'

Russell King says:

====================
net: phylink: introduce legacy mode flag

In March 2020, phylink gained support to split the PCS support out of
the MAC callbacks. By doing so, a slight behavioural difference was
introduced when a PCS is present, specifically:

1) the call to mac_config() when the link comes up or advertisement
changes were eliminated
2) mac_an_restart() will never be called
3) mac_pcs_get_state() will never be called

The intention was to eventually remove this support once all phylink
users were converted. Unfortunately, this still hasn't happened - and
in some cases, it looks like it may never happen.

Through discussion with Sean Anderson, we now need to allow the PCS to
be optional for modern drivers, so we need a different way to identify
these legacy drivers - in that we wish to allow the "modern" behaviour
where mac_config() is not called on link-up events, even if there is
no PCS attached.

In order to do that, this series of patches introduce a
"legacy_pre_march2020" which is used to permit the old behaviour - in
other words, we get the old behaviour only when there is no PCS and
this flag is true. Otherwise, we get the new behaviour.

I decided to use the date of the change in the flag as just using
"legacy" or "legacy_driver" is too non-descript. An alternative could
be to use the git sha1 hash of the set of changes.

I believe I have added the legacy flag to all the drivers which use
legacy mode - that being the mtk_eth_soc ethernet driver, and many DSA
drivers - the ones which need the old behaviour are identified by
having non-NULL phylink_mac_link_state or phylink_mac_an_restart
methods in their dsa_switch_ops structure.

ag71xx and xilinx do not need the legacy flag. ag71xx is explained in
its own commit, and xilinx only updates the inband advertisement in
the mac_config() call, which is sufficient qualification to avoid it
being marked legacy.
====================

Link: https://lore.kernel.org/r/Ya+DGaGmGgWrlVkW@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ag71xx: remove unnecessary legacy methods

ag71xx may have a PCS, but it does not appear to support configuration
of the PCS in the current code. The functions to get its state merely
report that the link is down, and the AN restart function is empty.

Since neither of these functions will be called unless phylink's legacy
flag is set, we can safely remove these functions and indicate this is
a modern driver.

Should PCS support be added later, it will need to be modelled using
the phylink_pcs support rather than operating as a legacy driver.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phylink: use legacy_pre_march2020

Use the legacy flag to indicate whether we should operate in legacy
mode. This allows us to stop using the presence of a PCS as an
indicator to the age of the phylink user, and make PCS presence
optional.

Legacy mode involves:
1) calling mac_config() whenever the link comes up
2) calling mac_config() whenever the inband advertisement changes,
possibly followed by a call to mac_an_restart()
3) making use of mac_an_restart()
4) making use of mac_pcs_get_state()

All the above functionality was moved to a seperate "PCS" block of
operations in March 2020.

Update the documents to indicate that the differences that this flag
makes.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mtk_eth_soc: mark as a legacy_pre_march2020 driver

mtk_eth_soc has not been updated for commit 7cceb599d15d ("net: phylink:
avoid mac_config calls"), and makes use of state->speed and
state->duplex in contravention of the phylink documentation. This makes
reliant on the legacy behaviours, so mark it as a legacy driver.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: mark DSA phylink as legacy_pre_march2020

The majority of DSA drivers do not make use of the PCS support, and
thus operate in legacy mode. In order to preserve this behaviour in
future, we need to set the legacy_pre_march2020 flag so phylink knows
this may require the legacy calls.

There are some DSA drivers that do make use of PCS support, and these
will continue operating as before - legacy_pre_march2020 will not
prevent split-PCS support enabling the newer phylink behaviour.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phylink: add legacy_pre_march2020 indicator

Add a boolean to phylink_config to indicate whether a driver has not
been updated for the changes in commit 7cceb599d15d ("net: phylink:
avoid mac_config calls"), and thus are reliant on the old behaviour.

We were currently keying the phylink behaviour on the presence of a
PCS, but this is sub-optimal for modern drivers that may not have a
PCS.

This commit merely introduces the new flag, but does not add any use,
since we need all legacy drivers to set this flag before it can be
used. Once these legacy drivers have been updated, we can remove this
flag.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'mtd/fixes-for-5.16-rc5' of git://git./linux/kernel/git/mtd/linux

Pull mtd fixes from Miquel Raynal:
"MTD fixes:

   - dataflash: Add device-tree SPI IDs to avoid new warnings

  Raw NAND fixes:

   - Fix nand_choose_best_timings() on unsupported interface

   - Fix nand_erase_op delay (wrong unit)

   - fsmc:
      - Fix timing computation
      - Take instruction delay into account

   - denali:
      - Add the dependency on HAS_IOMEM to silence robots"

* tag 'mtd/fixes-for-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: dataflash: Add device-tree SPI IDs
  mtd: rawnand: fsmc: Fix timing computation
  mtd: rawnand: fsmc: Take instruction delay into account
  mtd: rawnand: Fix nand_choose_best_timings() on unsupported interface
  mtd: rawnand: Fix nand_erase_op delay
  mtd: rawnand: denali: Add the dependency on HAS_IOMEM

Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Jiri Kosina:

- fixes for various drivers which assume that a HID device is on USB
   transport, but that might not necessarily be the case, as the device
   can be faked by uhid. (Greg, Benjamin Tissoires)

- fix for spurious wakeups on certain Lenovo notebooks (Thomas
   Weißschuh)

- a few other device-specific quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: Ignore battery for Elan touchscreen on Asus UX550VE
  HID: intel-ish-hid: ipc: only enable IRQ wakeup when requested
  HID: google: add eel USB id
  HID: add USB_HID dependancy to hid-prodikeys
  HID: add USB_HID dependancy to hid-chicony
  HID: bigbenff: prevent null pointer dereference
  HID: sony: fix error path in probe
  HID: add USB_HID dependancy on some USB HID drivers
  HID: check for valid USB device for many HID drivers
  HID: wacom: fix problems when device is not a valid USB device
  HID: add hid_is_usb() function to make it simpler for USB detection
  HID: quirks: Add quirk for the Microsoft Surface 3 type-cover

Merge tag 'netfs-fixes-20211207' of git://git./linux/kernel/git/dhowells/linux-fs

Pull netfslib fixes from David Howells:

- Fix a lockdep warning and potential deadlock. This is takes the
   simple approach of offloading the write-to-cache done from within a
   network filesystem read to a worker thread to avoid taking the
   sb_writer lock from the cache backing filesystem whilst holding the
   mmap lock on an inode from the network filesystem.

   Jan Kara posits a scenario whereby this can cause deadlock[1], though
   it's quite complex and I think requires someone in userspace to
   actually do I/O on the cache files. Matthew Wilcox isn't so certain,
   though[2].

   An alternative way to fix this, suggested by Darrick Wong, might be
   to allow cachefiles to prevent userspace from performing I/O upon the
   file - something like an exclusive open - but that's beyond the scope
   of a fix here if we do want to make such a facility in the future.

- In some of the error handling paths where netfs_ops->cleanup() is
   called, the arguments are transposed[3]. gcc doesn't complain because
   one of the parameters is void* and one of the values is void*.

Link: https://lore.kernel.org/r/20210922110420.GA21576@quack2.suse.cz/
Link: https://lore.kernel.org/r/Ya9eDiFCE2fO7K/S@casper.infradead.org/
Link: https://lore.kernel.org/r/20211207031449.100510-1-jefflexu@linux.alibaba.com/
* tag 'netfs-fixes-20211207' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  netfs: fix parameter of cleanup()
  netfs: Fix lockdep warning from taking sb_writers whilst holding mmap_lock

tools/lib/lockdep: drop leftover liblockdep headers

Clean up remaining headers that are specific to liblockdep but lived in
the shared header directory. These are all unused after the liblockdep
code was removed in commit 7246f4dcaccc ("tools/lib/lockdep: drop
liblockdep").

Note that there are still headers that were originally created for
liblockdep, that still have liblockdep references, but they are used by
other tools/ code at this point.

Signed-off-by: Sasha Levin <sashal@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

net: dsa: mv88e6xxx: allow use of PHYs on CPU and DSA ports

Martyn Welch reports that his CPU port is unable to link where it has
been necessary to use one of the switch ports with an internal PHY for
the CPU port. The reason behind this is the port control register is
left forcing the link down, preventing traffic flow.

This occurs because during initialisation, phylink expects the link to
be down, and DSA forces the link down by synthesising a call to the
DSA drivers phylink_mac_link_down() method, but we don't touch the
forced-link state when we later reconfigure the port.

Resolve this by also unforcing the link state when we are operating in
PHY mode and the PPU is set to poll the PHY to retrieve link status
information.

Reported-by: Martyn Welch <martyn.welch@collabora.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Fixes: 3be98b2d5fbc ("net: dsa: Down cpu/dsa ports phylink will control")
Cc: <stable@vger.kernel.org> # 5.7: 2b29cb9e3f7f: net: dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's"
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1mvFhP-00F8Zb-Ul@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-wwan-iosm-bug-fixes'

M Chetan Kumar says:

====================
net: wwan: iosm: bug fixes

This patch series brings in IOSM driver bug fixes. Patch details are
explained below.

PATCH1: stop sending unnecessary doorbell in IP tx flow.
PATCH2: Restore the IP channel configuration after fw flash.
PATCH3: Removed the unnecessary check around control port TX transfer.
====================

Link: https://lore.kernel.org/r/20211209101629.2940877-1-m.chetan.kumar@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: wwan: iosm: fixes unable to send AT command during mbim tx

ev_cdev_write_pending flag is preventing a TX message post for
AT port while MBIM transfer is ongoing.

Removed the unnecessary check around control port TX transfer.

Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: wwan: iosm: fixes net interface nonfunctional after fw flash

Devlink initialization flow was overwriting the IP traffic
channel configuration. This was causing wwan0 network interface
to be unusable after fw flash.

When device boots to fully functional mode restore the IP channel
configuration.

Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: wwan: iosm: fixes unnecessary doorbell send

In TX packet accumulation flow transport layer is
giving a doorbell to device even though there is
no pending control TX transfer that needs immediate
attention.

Introduced a new hpda_ctrl_pending variable to keep
track of pending control TX transfer. If there is a
pending control TX transfer which needs an immediate
attention only then give a doorbell to device.

Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: felix: Fix memory leak in felix_setup_mmio_filtering

Avoid a memory leak if there is not a CPU port defined.

Fixes: 8d5f7954b7c8 ("net: dsa: felix: break at first CPU port during init and teardown")
Addresses-Coverity-ID: 1492897 ("Resource leak")
Addresses-Coverity-ID: 1492899 ("Resource leak")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211209110538.11585-1-jose.exposito89@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: s390/net: remove myself as maintainer

I won't have access to the relevant HW and docs much longer.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Link: https://lore.kernel.org/r/20211209153546.1152921-1-jwi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: fq_pie: prevent dismantle issue

For some reason, fq_pie_destroy() did not copy
working code from pie_destroy() and other qdiscs,
thus causing elusive bug.

Before calling del_timer_sync(&q->adapt_timer),
we need to ensure timer will not rearm itself.

rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 0-....: (4416 ticks this GP) idle=60d/1/0x4000000000000000 softirq=10433/10434 fqs=2579
(t=10501 jiffies g=13085 q=3989)
NMI backtrace for cpu 0
CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 5.16.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111
nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62
trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline]
rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343
print_cpu_stall kernel/rcu/tree_stall.h:627 [inline]
check_cpu_stall kernel/rcu/tree_stall.h:711 [inline]
rcu_pending kernel/rcu/tree.c:3878 [inline]
rcu_sched_clock_irq.cold+0x9d/0x746 kernel/rcu/tree.c:2597
update_process_times+0x16d/0x200 kernel/time/timer.c:1785
tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226
tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428
__run_hrtimer kernel/time/hrtimer.c:1685 [inline]
__hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749
hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811
local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline]
__sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103
sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638
RIP: 0010:write_comp_data kernel/kcov.c:221 [inline]
RIP: 0010:__sanitizer_cov_trace_const_cmp1+0x1d/0x80 kernel/kcov.c:273
Code: 54 c8 20 48 89 10 c3 66 0f 1f 44 00 00 53 41 89 fb 41 89 f1 bf 03 00 00 00 65 48 8b 0c 25 40 70 02 00 48 89 ce 4c 8b 54 24 08 <e8> 4e f7 ff ff 84 c0 74 51 48 8b 81 88 15 00 00 44 8b 81 84 15 00
RSP: 0018:ffffc90000d27b28 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff888064bf1bf0 RCX: ffff888011928000
RDX: ffff888011928000 RSI: ffff888011928000 RDI: 0000000000000003
RBP: ffff888064bf1c28 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff875d8295 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8880783dd300 R14: 0000000000000000 R15: 0000000000000000
pie_calculate_probability+0x405/0x7c0 net/sched/sch_pie.c:418
fq_pie_timer+0x170/0x2a0 net/sched/sch_fq_pie.c:383
call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421
expire_timers kernel/time/timer.c:1466 [inline]
__run_timers.part.0+0x675/0xa20 kernel/time/timer.c:1734
__run_timers kernel/time/timer.c:1715 [inline]
run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1747
__do_softirq+0x29b/0x9c2 kernel/softirq.c:558
run_ksoftirqd kernel/softirq.c:921 [inline]
run_ksoftirqd+0x2d/0x60 kernel/softirq.c:913
smpboot_thread_fn+0x645/0x9c0 kernel/smpboot.c:164
kthread+0x405/0x4f0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>

Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Mohit P. Tahiliani <tahiliani@nitk.edu.in>
Cc: Sachin D. Patil <sdp.sachin@gmail.com>
Cc: V. Saicharan <vsaicharan1998@gmail.com>
Cc: Mohit Bhasi <mohitbhasi1998@gmail.com>
Cc: Leslie Monis <lesliemonis@gmail.com>
Cc: Gautam Ramakrishnan <gautamramk@gmail.com>
Link: https://lore.kernel.org/r/20211209084937.3500020-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mana: Fix memory leak in mana_hwc_create_wq

If allocating the DMA buffer fails, mana_hwc_destroy_wq was called
without previously storing the pointer to the queue.

In order to avoid leaking the pointer to the queue, store it as soon as
it is allocated.

Addresses-Coverity-ID: 1484720 ("Resource leak")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/20211208223723.18520-1-jose.exposito89@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

seg6: fix the iif in the IPv6 socket control block

When an IPv4 packet is received, the ip_rcv_core(...) sets the receiving
interface index into the IPv4 socket control block (v5.16-rc4,
net/ipv4/ip_input.c line 510):

IPCB(skb)->iif = skb->skb_iif;

If that IPv4 packet is meant to be encapsulated in an outer IPv6+SRH
header, the seg6_do_srh_encap(...) performs the required encapsulation.
In this case, the seg6_do_srh_encap function clears the IPv6 socket control
block (v5.16-rc4 net/ipv6/seg6_iptunnel.c line 163):

memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));

The memset(...) was introduced in commit ef489749aae5 ("ipv6: sr: clear
IP6CB(skb) on SRH ip4ip6 encapsulation") a long time ago (2019-01-29).

Since the IPv6 socket control block and the IPv4 socket control block share
the same memory area (skb->cb), the receiving interface index info is lost
(IP6CB(skb)->iif is set to zero).

As a side effect, that condition triggers a NULL pointer dereference if
commit 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig
netdev") is applied.

To fix that issue, we set the IP6CB(skb)->iif with the index of the
receiving interface once again.

Fixes: ef489749aae5 ("ipv6: sr: clear IP6CB(skb) on SRH ip4ip6 encapsulation")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211208195409.12169-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: Fix memory leak in nfp_cpp_area_cache_add()

In line 800 (#1), nfp_cpp_area_alloc() allocates and initializes a
CPP area structure. But in line 807 (#2), when the cache is allocated
failed, this CPP area structure is not freed, which will result in
memory leak.

We can fix it by freeing the CPP area when the cache is allocated
failed (#2).

792 int nfp_cpp_area_cache_add(struct nfp_cpp *cpp, size_t size)
793 {
794 struct nfp_cpp_area_cache *cache;
795 struct nfp_cpp_area *area;

800 area = nfp_cpp_area_alloc(cpp, NFP_CPP_ID(7, NFP_CPP_ACTION_RW, 0),
801 0, size);
// #1: allocates and initializes

802 if (!area)
803 return -ENOMEM;

805 cache = kzalloc(sizeof(*cache), GFP_KERNEL);
806 if (!cache)
807 return -ENOMEM; // #2: missing free

817 return 0;
818 }

Fixes: 4cb584e0ee7d ("nfp: add CPP access core")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20211209061511.122535-1-niejianglei2021@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: fix potential NULL pointer deref in nfc_genl_dump_ses_done

The done() netlink callback nfc_genl_dump_ses_done() should check if
received argument is non-NULL, because its allocation could fail earlier
in dumpit() (nfc_genl_dump_ses()).

Fixes: ac22ac466a65 ("NFC: Add a GET_SE netlink API")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211209081307.57337-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: fix segfault in nfc_genl_dump_devices_done

When kmalloc in nfc_genl_dump_devices() fails then
nfc_genl_dump_devices_done() segfaults as below

KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 25 Comm: kworker/0:1 Not tainted 5.16.0-rc4-01180-g2a987e65025e-dirty #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-6.fc35 04/01/2014
Workqueue: events netlink_sock_destruct_work
RIP: 0010:klist_iter_exit+0x26/0x80
Call Trace:
<TASK>
class_dev_iter_exit+0x15/0x20
nfc_genl_dump_devices_done+0x3b/0x50
genl_lock_done+0x84/0xd0
netlink_sock_destruct+0x8f/0x270
__sk_destruct+0x64/0x3b0
sk_destruct+0xa8/0xd0
__sk_free+0x2e8/0x3d0
sk_free+0x51/0x90
netlink_sock_destruct_work+0x1c/0x20
process_one_work+0x411/0x710
worker_thread+0x6fd/0xa80

Link: https://syzkaller.appspot.com/bug?id=fc0fa5a53db9edd261d56e74325419faf18bd0df
Reported-by: syzbot+f9f76f4a0766420b4a02@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211208182742.340542-1-tadeusz.struk@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

udp: using datalen to cap max gso segments

The max number of UDP gso segments is intended to cap to UDP_MAX_SEGMENTS,
this is checked in udp_send_skb():

    if (skb->len > cork->gso_size * UDP_MAX_SEGMENTS) {
        kfree_skb(skb);
        return -EINVAL;
    }

skb->len contains network and transport header len here, we should use
only data len instead.

Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/900742e5-81fb-30dc-6e0b-375c6cdd7982@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: mv88e6xxx: error handling for serdes_power functions

Added default case to handle undefined cmode scenario in
mv88e6393x_serdes_power() and mv88e6393x_serdes_power() methods.

Addresses-Coverity: 1494644 ("Uninitialized scalar variable")
Fixes: 21635d9203e1c (net: dsa: mv88e6xxx: Fix application of erratum 4.8 for 88E6393X)
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com>
Link: https://lore.kernel.org/r/20211209041552.9810-1-amhamza.mgc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-can-fixes-for-5.16-20211209' of git://git./linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
can 2021-12-09

Both patches are by Jimmy Assarsson. The first one fixes the
incrementing of the rx/tx error counters in the Kvaser PCIe FD driver.
The second one fixes the Kvaser USB driver by using the CAN clock
frequency provided by the device instead of using a hard coded value.

* tag 'linux-can-fixes-for-5.16-20211209' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: kvaser_usb: get CAN clock frequency from device
can: kvaser_pciefd: kvaser_pciefd_rx_error_frame(): increase correct stats->{rx,tx}_errors counter
====================

Link: https://lore.kernel.org/r/20211209081312.301036-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

can: kvaser_usb: get CAN clock frequency from device

The CAN clock frequency is used when calculating the CAN bittiming
parameters. When wrong clock frequency is used, the device may end up
with wrong bittiming parameters, depending on user requested bittiming
parameters.

To avoid this, get the CAN clock frequency from the device. Various
existing Kvaser Leaf products use different CAN clocks.

Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Link: https://lore.kernel.org/all/20211208152122.250852-2-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: kvaser_pciefd: kvaser_pciefd_rx_error_frame(): increase correct stats->{rx,tx}_errors counter

Check the direction bit in the error frame packet (EPACK) to determine
which net_device_stats {rx,tx}_errors counter to increase.

Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Link: https://lore.kernel.org/all/20211208152122.250852-1-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

net: huawei: hinic: Use devm_kcalloc() instead of devm_kzalloc()

Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().

Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211208040311.GA169838@embeddedor
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hinic: Use devm_kcalloc() instead of devm_kzalloc()

Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().

Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211208003527.GA75483@embeddedor
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-track-the-queue-count-at-unregistration'

Antoine Tenart says:

====================
net: track the queue count at unregistration

Those two patches allow to track the Rx and Tx queue count at
unregistration and help in detecting illegal addition of Tx queues after
unregister (a warning is added).

This follows discussions on the following thread,
https://lore.kernel.org/all/20211122162007.303623-1-atenart@kernel.org/T/

A patch fixing one issue linked to this was merged ealier,
https://lore.kernel.org/all/20211203101318.435618-1-atenart@kernel.org/T/
====================

Link: https://lore.kernel.org/r/20211207145725.352657-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net-sysfs: warn if new queue objects are being created during device unregistration

Calling netdev_queue_update_kobjects is allowed during device
unregistration since commit 5c56580b74e5 ("net: Adjust TX queue kobjects
if number of queues changes during unregister"). But this is solely to
allow queue unregistrations. Any path attempting to add new queues after
a device started its unregistration should be fixed.

This patch adds a warning to detect such illegal use.

Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net-sysfs: update the queue counts in the unregistration path

When updating Rx and Tx queue kobjects, the queue count should always be
updated to match the queue kobjects count. This was not done in the net
device unregistration path, fix it. Tracking all queue count updates
will allow in a following up patch to detect illegal updates.

Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mvpp2: fix XDP rx queues registering

The registration of XDP queue information is incorrect because the
RX queue id we use is invalid. When port->id == 0 it appears to works
as expected yet it's no longer the case when port->id != 0.

The problem arised while using a recent kernel version on the
MACCHIATOBin. This board has several ports:
* eth0 and eth1 are 10Gbps interfaces ; both ports has port->id == 0;
* eth2 is a 1Gbps interface with port->id != 0.

Code from xdp-tutorial (more specifically advanced03-AF_XDP) was used
to test packet capture and injection on all these interfaces. The XDP
kernel was simplified to:

SEC("xdp_sock")
int xdp_sock_prog(struct xdp_md *ctx)
{
int index = ctx->rx_queue_index;

/* A set entry here means that the correspnding queue_id
* has an active AF_XDP socket bound to it. */
if (bpf_map_lookup_elem(&xsks_map, &index))
return bpf_redirect_map(&xsks_map, index, 0);

return XDP_PASS;
}

Starting the program using:

./af_xdp_user -d DEV

Gives the following result:

* eth0 : ok
* eth1 : ok
* eth2 : no capture, no injection

Investigating the issue shows that XDP rx queues for eth2 are wrong:
XDP expects their id to be in the range [0..3] but we found them to be
in the range [32..35].

Trying to force rx queue ids using:

./af_xdp_user -d eth2 -Q 32

fails as expected (we shall not have more than 4 queues).

When we register the XDP rx queue information (using
xdp_rxq_info_reg() in function mvpp2_rxq_init()) we tell it to use
rxq->id as the queue id. This value is computed as:

rxq->id = port->id * max_rxq_count + queue_id

where max_rxq_count depends on the device version. In the MACCHIATOBin
case, this value is 32, meaning that rx queues on eth2 are numbered
from 32 to 35 - there are four of them.

Clearly, this is not the per-port queue id that XDP is expecting:
it wants a value in the range [0..3]. It shall directly use queue_id
which is stored in rxq->logic_rxq -- so let's use that value instead.

rxq->id is left untouched ; its value is indeed valid but it should
not be used in this context.

This is consistent with the remaining part of the code in
mvpp2_rxq_init().

With this change, packet capture is working as expected on all the
MACCHIATOBin ports.

Fixes: b27db2274ba8 ("mvpp2: use page_pool allocator")
Signed-off-by: Louis Amas <louis.amas@eho.link>
Signed-off-by: Emmanuel Deloget <emmanuel.deloget@eho.link>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/20211207143423.916334-1-louis.amas@eho.link
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'wwan-debugfs-tweaks'

Sergey Ryazanov says:

====================
WWAN debugfs tweaks

This is a follow-up series to just applied IOSM (and WWAN) debugfs
interface support [1]. The series has two main goals:
1. move the driver-specific debugfs knobs to a subdirectory;
2. make the debugfs interface optional for both IOSM and for the WWAN
core.

As for the first part, I must say that it was my mistake. I suggested to
place debugfs entries under a common per WWAN device directory. But I
missed the driver subdirectory in the example, so it become:

/sys/kernel/debugfs/wwan/wwan0/trace

Since the traces collection is a driver-specific feature, it is better
to keep it under the driver-specific subdirectory:

/sys/kernel/debugfs/wwan/wwan0/iosm/trace

It is desirable to be able to entirely disable the debugfs interface. It
can be disabled for several reasons, including security and consumed
storage space. See detailed rationale with usage example in the 4th
patch.

The changes themselves are relatively simple, but require a code
rearrangement. So to make changes clear, I chose to split them into
preparatory and main changes and properly describe each of them.

IOSM part is compile-tested only since I do not have IOSM supported
device, so it needs Ack from the driver developers.

I would like to thank Johannes Berg and Leon Romanovsky. Their
suggestions and comments helped a lot to rework the initial
over-engineered solution to something less confusing and much more
simple. Thanks!

1. https://lore.kernel.org/netdev/20211120162155.1216081-1-m.chetan.kumar@linux.intel.com
2. https://patchwork.kernel.org/project/netdevbpf/patch/20211204174033.950528-1-arnd@kernel.org/
====================

Link: https://lore.kernel.org/r/20211207092140.19142-1-ryazanov.s.a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: wwan: make debugfs optional

Debugfs interface is optional for the regular modem use. Some distros
and users will want to disable this feature for security or kernel
size reasons. So add a configuration option that allows to completely
disable the debugfs interface of the WWAN devices.

A primary considered use case for this option was embedded firmwares.
For example, in OpenWrt, you can not completely disable debugfs, as a
lot of wireless stuff can only be configured and monitored with the
debugfs knobs. At the same time, reducing the size of a kernel and
modules is an essential task in the world of embedded software.
Disabling the WWAN and IOSM debugfs interfaces allows us to save 50K
(x86-64 build) of space for module storage. Not much, but already
considerable when you only have 16MB of storage.

So it is hard to just disable whole debugfs. Users need some fine
grained set of options to control which debugfs interface is important
and should be available and which is not.

The new configuration symbol is enabled by default and is hidden under
the EXPERT option. So a regular user would not be bothered by another
one configuration question. While an embedded distro maintainer will be
able to a little more reduce the final image size.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: wwan: iosm: move debugfs knobs into a subdir

The modem traces collection is a device (and so driver) specific option.
Therefore, move the related debugfs files into a driver-specific
subdirectory under the common per WWAN device directory.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: wwan: iosm: allow trace port be uninitialized

Collecting modem firmware traces is optional for the regular modem use.
There are not many reasons for aborting device initialization due to an
inability to initialize the trace port and (or) its debugfs interface.
So, demote the initialization failure erro message into a warning and do
not break the initialization sequence in this case. Rework packet
processing and deinitialization so that they do not crash in case of
uninitialized trace port.

This change is mainly a preparation for an upcoming configuration option
introduction that will help disable driver debugfs functionality.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: wwan: iosm: consolidate trace port init code

Move the channel related structures initialization from
ipc_imem_channel_init() to ipc_trace_init() and call it directly. On the
one hand, this makes the trace port initialization symmetric to the
deitialization, that is, it removes the additional wrapper.

On the other hand, this change consolidates the trace port related code
into a single source file, what facilitates an upcoming disabling of
this functionality by a user choise.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

vmxnet3: fix minimum vectors alloc issue

'Commit 39f9895a00f4 ("vmxnet3: add support for 32 Tx/Rx queues")'
added support for 32Tx/Rx queues. Within that patch, value of
VMXNET3_LINUX_MIN_MSIX_VECT was updated.

However, there is a case (numvcpus = 2) which actually requires 3
intrs which matches VMXNET3_LINUX_MIN_MSIX_VECT which then is
treated as failure by stack to allocate more vectors. This patch
fixes this issue.

Fixes: 39f9895a00f4 ("vmxnet3: add support for 32 Tx/Rx queues")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Link: https://lore.kernel.org/r/20211207081737.14000-1-doshir@vmware.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net, neigh: clear whole pneigh_entry at alloc time

Commit 2c611ad97a82 ("net, neigh: Extend neigh->flags to 32 bit
to allow for extensions") enables a new KMSAM warning [1]

I think the bug is actually older, because the following intruction
only occurred if ndm->ndm_flags had NTF_PROXY set.

pn->flags = ndm->ndm_flags;

Let's clear all pneigh_entry fields at alloc time.

[1]
BUG: KMSAN: uninit-value in pneigh_fill_info+0x986/0xb30 net/core/neighbour.c:2593
pneigh_fill_info+0x986/0xb30 net/core/neighbour.c:2593
pneigh_dump_table net/core/neighbour.c:2715 [inline]
neigh_dump_info+0x1e3f/0x2c60 net/core/neighbour.c:2832
netlink_dump+0xaca/0x16a0 net/netlink/af_netlink.c:2265
__netlink_dump_start+0xd1c/0xee0 net/netlink/af_netlink.c:2370
netlink_dump_start include/linux/netlink.h:254 [inline]
rtnetlink_rcv_msg+0x181b/0x18c0 net/core/rtnetlink.c:5534
netlink_rcv_skb+0x447/0x800 net/netlink/af_netlink.c:2491
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5589
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x1095/0x1360 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x16f3/0x1870 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
sock_write_iter+0x594/0x690 net/socket.c:1057
call_write_iter include/linux/fs.h:2162 [inline]
new_sync_write fs/read_write.c:503 [inline]
vfs_write+0x1318/0x2030 fs/read_write.c:590
ksys_write+0x28c/0x520 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__x64_sys_write+0xdb/0x120 fs/read_write.c:652
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
slab_alloc mm/slub.c:3259 [inline]
__kmalloc+0xc3c/0x12d0 mm/slub.c:4437
kmalloc include/linux/slab.h:595 [inline]
pneigh_lookup+0x60f/0xd70 net/core/neighbour.c:766
arp_req_set_public net/ipv4/arp.c:1016 [inline]
arp_req_set+0x430/0x10a0 net/ipv4/arp.c:1032
arp_ioctl+0x8d4/0xb60 net/ipv4/arp.c:1232
inet_ioctl+0x4ef/0x820 net/ipv4/af_inet.c:947
sock_do_ioctl net/socket.c:1118 [inline]
sock_ioctl+0xa3f/0x13e0 net/socket.c:1235
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl+0x2df/0x4a0 fs/ioctl.c:860
__x64_sys_ioctl+0xd8/0x110 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae

CPU: 1 PID: 20001 Comm: syz-executor.0 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 62dd93181aaa ("[IPV6] NDISC: Set per-entry is_router flag in Proxy NA.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211206165329.1049835-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-can-next-for-5.17-20211208' of git://git./linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
can-next 2021-12-08

The first patch is by Vincent Mailhol and replaces the custom CAN
units with generic one form linux/units.h.

The next 3 patches are by Evgeny Boger and add Allwinner R40 support
to the sun4i CAN driver.

Andy Shevchenko contributes 4 patches to the hi311x CAN driver,
consisting of cleanups and converting the driver to the device
property API.

* tag 'linux-can-next-for-5.17-20211208' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
  can: hi311x: hi3110_can_probe(): convert to use dev_err_probe()
  can: hi311x: hi3110_can_probe(): make use of device property API
  can: hi311x: hi3110_can_probe(): try to get crystal clock rate from property
  can: hi311x: hi3110_can_probe(): use devm_clk_get_optional() to get the input clock
  ARM: dts: sun8i: r40: add node for CAN controller
  can: sun4i_can: add support for R40 CAN controller
  dt-bindings: net: can: add support for Allwinner R40 CAN controller
  can: bittiming: replace CAN units with the generic ones from linux/units.h
====================

Link: https://lore.kernel.org/r/20211208125055.223141-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Fix bogus compilter warning in nfnetlink_queue, from Florian Westphal.

2) Don't run conntrack on vrf with !dflt qdisc, from Nicolas Dichtel.

3) Fix nft_pipapo bucket load in AVX2 lookup routine for six 8-bit
   groups, from Stefano Brivio.

4) Break rule evaluation on malformed TCP options.

5) Use socat instead of nc in selftests/netfilter/nft_zones_many.sh,
   also from Florian

6) Fix KCSAN data-race in conntrack timeout updates, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  netfilter: conntrack: annotate data-races around ct->timeout
  selftests: netfilter: switch zone stress to socat
  netfilter: nft_exthdr: break evaluation if setting TCP option fails
  selftests: netfilter: Add correctness test for mac,net set type
  nft_set_pipapo: Fix bucket load in AVX2 lookup routine for six 8-bit groups
  vrf: don't run conntrack on vrf with !dflt qdisc
  netfilter: nfnetlink_queue: silence bogus compiler warning
====================

Link: https://lore.kernel.org/r/20211209000847.102598-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-12-08

Yahui adds re-initialization of Flow Director for VF reset.

Paul restores interrupts when enabling VFs.

Dave re-adds bandwidth check for DCBNL and moves DSCP mode check
earlier in the function.

Jesse prevents reporting of dropped packets that occur during
initialization and fixes reporting of statistics which could occur with
frequent reads.

Michal corrects setting of protocol type for UDP header and fixes lack
of differentiation when adding filters for tunnels.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: safer stats processing
  ice: fix adding different tunnels
  ice: fix choosing UDP header type
  ice: ignore dropped packets during init
  ice: Fix problems with DSCP QoS implementation
  ice: rearm other interrupt cause register after enabling VFs
  ice: fix FDIR init missing when reset VF
====================

Link: https://lore.kernel.org/r/20211208211144.2629867-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
bpf 2021-12-08

We've added 12 non-merge commits during the last 22 day(s) which contain
a total of 29 files changed, 659 insertions(+), 80 deletions(-).

The main changes are:

1) Fix an off-by-two error in packet range markings and also add a batch of
   new tests for coverage of these corner cases, from Maxim Mikityanskiy.

2) Fix a compilation issue on MIPS JIT for R10000 CPUs, from Johan Almbladh.

3) Fix two functional regressions and a build warning related to BTF kfunc
   for modules, from Kumar Kartikeya Dwivedi.

4) Fix outdated code and docs regarding BPF's migrate_disable() use on non-
   PREEMPT_RT kernels, from Sebastian Andrzej Siewior.

5) Add missing includes in order to be able to detangle cgroup vs bpf header
   dependencies, from Jakub Kicinski.

6) Fix regression in BPF sockmap tests caused by missing detachment of progs
   from sockets when they are removed from the map, from John Fastabend.

7) Fix a missing "no previous prototype" warning in x86 JIT caused by BPF
   dispatcher, from Björn Töpel.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Add selftests to cover packet access corner cases
  bpf: Fix the off-by-two error in range markings
  treewide: Add missing includes masked by cgroup -> bpf dependency
  tools/resolve_btfids: Skip unresolved symbol warning for empty BTF sets
  bpf: Fix bpf_check_mod_kfunc_call for built-in modules
  bpf: Make CONFIG_DEBUG_INFO_BTF depend upon CONFIG_BPF_SYSCALL
  mips, bpf: Fix reference to non-existing Kconfig symbol
  bpf: Make sure bpf_disable_instrumentation() is safe vs preemption.
  Documentation/locking/locktypes: Update migrate_disable() bits.
  bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap
  bpf, sockmap: Attach map progs to psock early for feature probes
  bpf, x86: Fix "no previous prototype" warning
====================

Link: https://lore.kernel.org/r/20211208155125.11826-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's"

This commit fixes a misunderstanding in commit 4a3e0aeddf09 ("net: dsa:
mv88e6xxx: don't use PHY_DETECT on internal PHY's").

For Marvell DSA switches with the PHY_DETECT bit (for non-6250 family
devices), controls whether the PPU polls the PHY to retrieve the link,
speed, duplex and pause status to update the port configuration. This
applies for both internal and external PHYs.

For some switches such as 88E6352 and 88E6390X, PHY_DETECT has an
additional function of enabling auto-media mode between the internal
PHY and SERDES blocks depending on which first gains link.

The original intention of commit 5d5b231da7ac (net: dsa: mv88e6xxx: use
PHY_DETECT in mac_link_up/mac_link_down) was to allow this bit to be
used to detect when this propagation is enabled, and allow software to
update the port configuration. This has found to be necessary for some
switches which do not automatically propagate status from the SERDES to
the port, which includes the 88E6390. However, commit 4a3e0aeddf09
("net: dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's") breaks
this assumption.

Maarten Zanders has confirmed that the issue he was addressing was for
an 88E6250 switch, which does not have a PHY_DETECT bit in bit 12, but
instead a link status bit. Therefore, mv88e6xxx_port_ppu_updates() does
not report correctly.

This patch resolves the above issues by reverting Maarten's change and
instead making mv88e6xxx_port_ppu_updates() indicate whether the port
is internal for the 88E6250 family of switches.

  Yes, you're right, I'm targeting the 6250 family. And yes, your
  suggestion would solve my case and is a better implementation for
  the other devices (as far as I can see).

Fixes: 4a3e0aeddf09 ("net: dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Maarten Zanders <maarten.zanders@mind.be>
Link: https://lore.kernel.org/r/E1muXm7-00EwJB-7n@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'rework-dsa-bridge-tx-forwarding-offload-api'

Vladimir Oltean says:

====================
Rework DSA bridge TX forwarding offload API

This change set is preparation work for DSA support of bridge FDB
isolation. It replaces struct net_device *dp->bridge_dev with a struct
dsa_bridge *dp->bridge that contains some extra information about that
bridge, like a unique number kept by DSA.

Up until now we computed that number only with the bridge TX forwarding
offload feature, but it will be needed for other features too, like for
isolation of FDB entries belonging to different bridges. Hardware
implementations vary, but one common pattern seems to be the presence of
a FID field which can be associated with that bridge number kept by DSA.
The idea was outlined here:
https://patchwork.kernel.org/project/netdevbpf/patch/20210818120150.892647-16-vladimir.oltean@nxp.com/
(the difference being that with this new proposal, drivers would not
need to call dsa_bridge_num_find, instead the bridge_num would be part
of the struct dsa_bridge :: num passed as argument).

No functional change is intended for drivers that don't already make use
of the bridge TX forwarding offload. I've tested the changes on the
felix, sja1105 and mv88e6xxx drivers, but nonetheless I'm copying all
DSA driver maintainers due to API changes that are taking place.

Compared to v1 and v2, the amount of patches is larger, but the contents
is mostly the same, just split up hopefully a bit better for review.
====================

Link: https://lore.kernel.org/r/20211206165758.1553882-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: eliminate dsa_switch_ops :: port_bridge_tx_fwd_{,un}offload

We don't really need new switch API for these, and with new switches
which intend to add support for this feature, it will become cumbersome
to maintain.

The change consists in restructuring the two drivers that implement this
offload (sja1105 and mv88e6xxx) such that the offload is enabled and
disabled from the ->port_bridge_{join,leave} methods instead of the old
->port_bridge_tx_fwd_{,un}offload.

The only non-trivial change is that mv88e6xxx_map_virtual_bridge_to_pvt()
has been moved to avoid a forward declaration, and the
mv88e6xxx_reg_lock() calls from inside it have been removed, since
locking is now done from mv88e6xxx_port_bridge_{join,leave}.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: add a "tx_fwd_offload" argument to ->port_bridge_join

This is a preparation patch for the removal of the DSA switch methods
->port_bridge_tx_fwd_offload() and ->port_bridge_tx_fwd_unoffload().
The plan is for the switch to report whether it offloads TX forwarding
directly as a response to the ->port_bridge_join() method.

This change deals with the noisy portion of converting all existing
function prototypes to take this new boolean pointer argument.
The bool is placed in the cross-chip notifier structure for bridge join,
and a reference to it is provided to drivers. In the next change, DSA
will then actually look at this value instead of calling
->port_bridge_tx_fwd_offload().

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: keep the bridge_dev and bridge_num as part of the same structure

The main desire behind this is to provide coherent bridge information to
the fast path without locking.

For example, right now we set dp->bridge_dev and dp->bridge_num from
separate code paths, it is theoretically possible for a packet
transmission to read these two port properties consecutively and find a
bridge number which does not correspond with the bridge device.

Another desire is to start passing more complex bridge information to
dsa_switch_ops functions. For example, with FDB isolation, it is
expected that drivers will need to be passed the bridge which requested
an FDB/MDB entry to be offloaded, and along with that bridge_dev, the
associated bridge_num should be passed too, in case the driver might
want to implement an isolation scheme based on that number.

We already pass the {bridge_dev, bridge_num} pair to the TX forwarding
offload switch API, however we'd like to remove that and squash it into
the basic bridge join/leave API. So that means we need to pass this
pair to the bridge join/leave API.

During dsa_port_bridge_leave, first we unset dp->bridge_dev, then we
call the driver's .port_bridge_leave with what used to be our
dp->bridge_dev, but provided as an argument.

When bridge_dev and bridge_num get folded into a single structure, we
need to preserve this behavior in dsa_port_bridge_leave: we need a copy
of what used to be in dp->bridge.

Switch drivers check bridge membership by comparing dp->bridge_dev with
the provided bridge_dev, but now, if we provide the struct dsa_bridge as
a pointer, they cannot keep comparing dp->bridge to the provided
pointer, since this only points to an on-stack copy. To make this
obvious and prevent driver writers from forgetting and doing stupid
things, in this new API, the struct dsa_bridge is provided as a full
structure (not very large, contains an int and a pointer) instead of a
pointer. An explicit comparison function needs to be used to determine
bridge membership: dsa_port_offloads_bridge().

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: export bridging offload helpers to drivers

Move the static inline helpers from net/dsa/dsa_priv.h to
include/net/dsa.h, so that drivers can call functions such as
dsa_port_offloads_bridge_dev(), which will be necessary after the
transition to a more complex bridge structure.

More functions than are needed right now are being moved, but this is
done for uniformity.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: rename dsa_port_offloads_bridge to dsa_port_offloads_bridge_dev

Currently the majority of dsa_port_bridge_dev_get() calls in drivers is
just to check whether a port is under the bridge device provided as
argument by the DSA API.

We'd like to change that DSA API so that a more complex structure is
provided as argument. To keep things more generic, and considering that
the new complex structure will be provided by value and not by
reference, direct comparisons between dp->bridge and the provided bridge
will be broken. The generic way to do the checking would simply be to
do something like dsa_port_offloads_bridge(dp, &bridge).

But there's a problem, we already have a function named that way, which
actually takes a bridge_dev net_device as argument. Rename it so that we
can use dsa_port_offloads_bridge for something else.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: hide dp->bridge_dev and dp->bridge_num in drivers behind helpers

The location of the bridge device pointer and number is going to change.
It is not going to be kept individually per port, but in a common
structure allocated dynamically and which will have lockdep validation.

Use the helpers to access these elements so that we have a migration
path to the new organization.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: hide dp->bridge_dev and dp->bridge_num in the core behind helpers

The location of the bridge device pointer and number is going to change.
It is not going to be kept individually per port, but in a common
structure allocated dynamically and which will have lockdep validation.

Create helpers to access these elements so that we have a migration path
to the new organization.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: mv88e6xxx: compute port vlan membership based on dp->bridge_dev comparison

The goal of this change is to reduce mv88e6xxx_port_vlan() to a form
where dsa_port_bridge_same() can be used, since the dp->bridge_dev
pointer will be hidden in a future change.

To do that, we observe that the "br" pointer is deduced from a
dp->bridge_dev in both cases (of a physical switch port as well as a
virtual bridge). So instead of keeping the "br" pointer, we can just
keep the "dp" pointer from which "br" gets derived.

In the last iteration over switch ports, we must use another iterator
variable, "other_dp"since now we use the "dp" variable to keep an
indirect reference to the bridge. While at it, the old code used to
filter only the ports which were part of the same switch as "ds".
There exists a dedicated DSA port iterator for that:
dsa_switch_for_each_port (which skips the ports in the tree that belong
to non-local switches), so we can just use that.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: mv88e6xxx: iterate using dsa_switch_for_each_user_port in mv88e6xxx_port_check_hw_vlan

Avoid a plethora of dsa_to_port() calls (some hidden behind
dsa_is_*_port and some in plain sight) by keeping two struct dsa_port
references: one to the port passed as argument, and another to the other
ports of the switch that we're iterating over.

This isn't called from the DSA initialization path, so there is no risk
that we have user ports without a dp->slave populated. So the combined
checks that a port isn't a DSA port, a CPU port, or doesn't have a slave
net device (therefore is unused), are strictly equivalent to the simple
check that the port is a user port. This is already handled by the DSA
iterator.

i gets replaced by other_dp->index, dsa_is_*_port calls get replaced by
dsa_port_is_*, and dsa_to_port gets replaced by the respective pointer
directly.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: mt7530: iterate using dsa_switch_for_each_user_port in bridging ops

Avoid repeated calls to dsa_to_port() (some hidden behind dsa_is_user_port
and some in plain sight) by keeping two struct dsa_port references: one
to the port passed as argument, and another to the other ports of the
switch that we're iterating over.

dsa_to_port(ds, i) gets replaced by other_dp, i gets replaced by
other_port which is derived from other_dp->index, dsa_is_user_port is
handled by the DSA iterator.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: assign a bridge number even without TX forwarding offload

The service where DSA assigns a unique bridge number for each forwarding
domain is useful even for drivers which do not implement the TX
forwarding offload feature.

For example, drivers might use the dp->bridge_num for FDB isolation.

So rename ds->num_fwd_offloading_bridges to ds->max_num_bridges, and
calculate a unique bridge_num for all drivers that set this value.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: make dp->bridge_num one-based

I have seen too many bugs already due to the fact that we must encode an
invalid dp->bridge_num as a negative value, because the natural tendency
is to check that invalid value using (!dp->bridge_num). Latest example
can be seen in commit 1bec0f05062c ("net: dsa: fix bridge_num not
getting cleared after ports leaving the bridge").

Convert the existing users to assume that dp->bridge_num == 0 is the
encoding for invalid, and valid bridge numbers start from 1.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ice: safer stats processing

The driver was zeroing live stats that could be fetched by
ndo_get_stats64 at any time. This could result in inconsistent
statistics, and the telltale sign was when reading stats frequently from
/proc/net/dev, the stats would go backwards.

Fix by collecting stats into a local, and delaying when we write to the
structure so it's not incremental.

Fixes: fcea6f3da546 ("ice: Add stats and ethtool support")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

HID: Ignore battery for Elan touchscreen on Asus UX550VE

Battery status is reported for the Asus UX550VE touchscreen even though
it does not have a battery. Prevent it from always reporting the
battery as low.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1897823
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

bpf: Add selftests to cover packet access corner cases

This commit adds BPF verifier selftests that cover all corner cases by
packet boundary checks. Specifically, 8-byte packet reads are tested at
the beginning of data and at the beginning of data_meta, using all kinds
of boundary checks (all comparison operators: <, >, <=, >=; both
permutations of operands: data + length compared to end, end compared to
data + length). For each case there are three tests:

1. Length is just enough for an 8-byte read. Length is either 7 or 8,
   depending on the comparison.

2. Length is increased by 1 - should still pass the verifier. These
   cases are useful, because they failed before commit 2fa7d94afc1a
   ("bpf: Fix the off-by-two error in range markings").

3. Length is decreased by 1 - should be rejected by the verifier.

Some existing tests are just renamed to avoid duplication.

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211207081521.41923-1-maximmi@nvidia.com

can: hi311x: hi3110_can_probe(): convert to use dev_err_probe()

When deferred the reason is saved for further debugging. Besides that,
it's fine to call dev_err_probe() in ->probe() when error code is
known. Convert the driver to use dev_err_probe().

Link: https://lore.kernel.org/all/20211206165542.69887-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: hi311x: hi3110_can_probe(): make use of device property API

Make use of device property API in this driver so that both OF based
system and ACPI based system can use this driver.

Link: https://lore.kernel.org/all/20211206165542.69887-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: hi311x: hi3110_can_probe(): try to get crystal clock rate from property

In some configurations, mainly ACPI-based, the clock frequency of the
device is supplied by very well established 'clock-frequency'
property. Hence, try to get it from the property at last if no other
providers are available.

Link: https://lore.kernel.org/all/20211206165542.69887-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: hi311x: hi3110_can_probe(): use devm_clk_get_optional() to get the input clock

It's not clear what was the intention of redundant usage of IS_ERR()
around the clock pointer since with the error check of devm_clk_get()
followed by bailout it can't be invalid,

Simplify the code which fetches the input clock by using
devm_clk_get_optional(). It will allow to switch to device properties
approach in the future.

Link: https://lore.kernel.org/all/20211206165542.69887-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

ARM: dts: sun8i: r40: add node for CAN controller

Allwinner R40 (also known as A40i, T3, V40) has a CAN controller. The
controller is the same as in earlier A10 and A20 SoCs, but needs reset
line to be deasserted before use.

This patch adds a CAN node and the corresponding pinctrl descriptions.

Link: https://lore.kernel.org/all/20211122104616.537156-4-boger@wirenboard.com
Signed-off-by: Evgeny Boger <boger@wirenboard.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: sun4i_can: add support for R40 CAN controller

Allwinner R40 (also known as A40i, T3, V40) has a CAN controller. The
controller is the same as in earlier A10 and A20 SoCs, but needs reset
line to be deasserted before use.

This patch adds a new compatible for R40 CAN controller. Depending
on the compatible, reset line can be requested from DT.

Link: https://lore.kernel.org/all/20211122104616.537156-3-boger@wirenboard.com
Signed-off-by: Evgeny Boger <boger@wirenboard.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

dt-bindings: net: can: add support for Allwinner R40 CAN controller

Allwinner R40 (also known as A40i, T3, V40) has a CAN controller. The
controller is the same as in earlier A10 and A20 SoCs, but needs reset
line to be deasserted before use.

This patch Introduces new compatible for R40 CAN controller with
required resets property.

Link: https://lore.kernel.org/all/20211122104616.537156-2-boger@wirenboard.com
Signed-off-by: Evgeny Boger <boger@wirenboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: bittiming: replace CAN units with the generic ones from linux/units.h

In [1], we introduced a set of units in linux/can/bittiming.h. Since
then, generic SI prefixes were added to linux/units.h in [2]. Those
new prefixes can perfectly replace CAN specific ones.

This patch replaces all occurrences of the CAN units with their
corresponding prefix (from linux/units) and the unit (as a comment)
according to below table.

CAN units SI metric prefix (from linux/units) + unit (as a comment)
------------------------------------------------------------------------
CAN_KBPS KILO /* BPS */
CAN_MBPS MEGA /* BPS */
CAM_MHZ MEGA /* Hz */

The definition are then removed from linux/can/bittiming.h

[1] commit 1d7750760b70 ("can: bittiming: add CAN_KBPS, CAN_MBPS and
CAN_MHZ macros")

[2] commit 26471d4a6cf8 ("units: Add SI metric prefix definitions")

Link: https://lore.kernel.org/all/20211124014536.782550-1-mailhol.vincent@wanadoo.fr
Suggested-by: Jimmy Assarsson <extja@kvaser.com>
Suggested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Merge branch 's390-net-updates-2021-12-06'

Alexandra Winter says:

====================
s390/net: updates 2021-12-06

This brings some maintenance improvements and removes some
unnecessary code checks.
====================

Link: https://lore.kernel.org/r/20211207090452.1155688-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

s390/qeth: remove check for packing mode in qeth_check_outbound_queue()

If qeth_check_outbound_queue() finds a partially filled TX buffer on
the queue and flushes it, then the queue _must_ have been in packing
mode.

Remove the redundant check when updating the relevant statistics.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

s390/qeth: fine-tune .ndo_select_queue()

Avoid a conditional branch for L2 devices when selecting the TX queue,
and have shared logic for OSA devices.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

s390/qeth: don't offer .ndo_bridge_* ops for OSA devices

qeth_l2_detect_dev2br_support() will only set brport_hw_features for IQD
devices. So qeth_l2_bridge_getlink() and qeth_l2_bridge_setlink() will
always return -EOPNOTSUPP on OSA devices. Just don't offer these
callbacks instead.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

s390/qeth: split up L2 netdev_ops

Splitting up the netdev_ops allows for fine-tuning some of the ndo's
in subsequent patches.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

s390/qeth: simplify qeth_receive_skb()

Now that the OSN code is gone, we don't need the second switch statement
in the RX path. And getting rid of its (unreachable) default case is a
nice simplification.

Also don't pass in the full HW header, all we still need is a flag to
indicate whether the skb can use CSO. This we can already obtain during
the first peek at the HW header.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

hv_sock: Extract hvs_send_data() helper that takes only header

When building under -Warray-bounds, the compiler is especially
conservative when faced with casts from a smaller object to a larger
object. While this has found many real bugs, there are some cases that
are currently false positives (like here). With this as one of the last
few instances of the warning in the kernel before -Warray-bounds can be
enabled globally, rearrange the functions so that there is a header-only
version of hvs_send_data(). Silences this warning:

net/vmw_vsock/hyperv_transport.c: In function 'hvs_shutdown_lock_held.constprop':
net/vmw_vsock/hyperv_transport.c:231:32: warning: array subscript 'struct hvs_send_buf[0]' is partly outside array bounds of 'struct vmpipe_proto_header[1]' [-Warray-bounds]
  231 |         send_buf->hdr.pkt_type = 1;
      |         ~~~~~~~~~~~~~~~~~~~~~~~^~~
net/vmw_vsock/hyperv_transport.c:465:36: note: while referencing 'hdr'
  465 |         struct vmpipe_proto_header hdr;
      |                                    ^~~

This change results in no executable instruction differences.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20211207063217.2591451-1-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: felix: use kmemdup() to replace kmalloc + memcpy

Fix following coccicheck warning:
/drivers/net/dsa/ocelot/felix_vsc9959.c:1627:13-20:
WARNING opportunity for kmemdup
/drivers/net/dsa/ocelot/felix_vsc9959.c:1506:16-23:
WARNING opportunity for kmemdup

Signed-off-by: Yihao Han <hanyihao@vivo.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211207064419.38632-1-hanyihao@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'prepare-ocelot-for-external-interface-control'

Colin Foster says:

====================
prepare ocelot for external interface control

This patch set is derived from an attempt to include external control
for a VSC751[1234] chip via SPI. That patch set has grown large and is
getting unwieldy for reviewers and the developers... me.

I'm breaking out the changes from that patch set. Some are trivial
  net: dsa: ocelot: remove unnecessary pci_bar variables
  net: dsa: ocelot: felix: Remove requirement for PCS in felix devices

some are required for SPI
  net: dsa: ocelot: felix: add interface for custom regmaps

and some are just to expose code to be shared
  net: mscc: ocelot: split register definitions to a separate file

The entirety of this patch set should have essentially no impact on the
system performance.
====================

Link: https://lore.kernel.org/r/20211207170030.1406601-1-colin.foster@in-advantage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mscc: ocelot: split register definitions to a separate file

Move these to a separate file will allow them to be shared to other
drivers.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: ocelot: felix: add interface for custom regmaps

Add an interface so that non-mmio regmaps can be used

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: ocelot: felix: Remove requirement for PCS in felix devices

Existing felix devices all have an initialized pcs array. Future devices
might not, so running a NULL check on the array before dereferencing it
will allow those future drivers to not crash at this point

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: ocelot: remove unnecessary pci_bar variables

The pci_bar variables for the switch and imdio don't make sense for the
generic felix driver. Moving them to felix_vsc9959 to limit scope and
simplify the felix_info struct.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: fec: only clear interrupt of handling queue in fec_enet_rx_queue()

Background:
We have a customer is running a Profinet stack on the 8MM which receives and
responds PNIO packets every 4ms and PNIO-CM packets every 40ms. However, from
time to time the received PNIO-CM package is "stock" and is only handled when
receiving a new PNIO-CM or DCERPC-Ping packet (tcpdump shows the PNIO-CM and
the DCERPC-Ping packet at the same time but the PNIO-CM HW timestamp is from
the expected 40 ms and not the 2s delay of the DCERPC-Ping).

After debugging, we noticed PNIO, PNIO-CM and DCERPC-Ping packets would
be handled by different RX queues.

The root cause should be driver ack all queues' interrupt when handle a
specific queue in fec_enet_rx_queue(). The blamed patch is introduced to
receive as much packets as possible once to avoid interrupt flooding.
But it's unreasonable to clear other queues'interrupt when handling one
queue, this patch tries to fix it.

Fixes: ed63f1dcd578 (net: fec: clear receive interrupts before processing a packet)
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Reported-by: Nicolas Diaz <nicolas.diaz@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20211206135457.15946-1-qiangqing.zhang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>