Martin Radev [Tue, 12 Jan 2021 15:07:29 +0000 (16:07 +0100)]
swiotlb: Validate bounce size in the sync/unmap path
The size of the buffer being bounced is not checked if it happens
to be larger than the size of the mapped buffer. Because the size
can be controlled by a device, as it's the case with virtio devices,
this can lead to memory corruption.
This patch saves the remaining buffer memory for each slab and uses
that information for validation in the sync/unmap paths before
swiotlb_bounce is called.
Validating this argument is important under the threat models of
AMD SEV-SNP and Intel TDX, where the HV is considered untrusted.
Signed-off-by: Martin Radev <martin.b.radev@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Jianxiong Gao [Mon, 1 Feb 2021 18:30:17 +0000 (10:30 -0800)]
nvme-pci: set min_align_mask
The PRP addressing scheme requires all PRP entries except for the
first one to have a zero offset into the NVMe controller pages (which
can be different from the Linux PAGE_SIZE). Use the min_align_mask
device parameter to ensure that swiotlb does not change the address
of the buffer modulo the device page size to ensure that the PRPs
won't be malformed.
Signed-off-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Christoph Hellwig [Mon, 22 Feb 2021 19:39:44 +0000 (14:39 -0500)]
swiotlb: respect min_align_mask
Respect the min_align_mask in struct device_dma_parameters in swiotlb.
There are two parts to it:
1) for the lower bits of the alignment inside the io tlb slot, just
extent the size of the allocation and leave the start of the slot
empty
2) for the high bits ensure we find a slot that matches the high bits
of the alignment to avoid wasting too much memory
Based on an earlier patch from Jianxiong Gao <jxgao@google.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Christoph Hellwig [Fri, 5 Feb 2021 09:44:16 +0000 (10:44 +0100)]
swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single
swiotlb_tbl_map_single currently nevers sets a tlb_addr that is not
aligned to the tlb bucket size. But we're going to add such a case
soon, for which this adjustment would be bogus.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Christoph Hellwig [Thu, 4 Feb 2021 10:08:35 +0000 (11:08 +0100)]
swiotlb: refactor swiotlb_tbl_map_single
Split out a bunch of a self-contained helpers to make the function easier
to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Christoph Hellwig [Thu, 4 Feb 2021 09:13:40 +0000 (10:13 +0100)]
swiotlb: clean up swiotlb_tbl_unmap_single
Remove a layer of pointless indentation, replace a hard to follow
ternary expression with a plain if/else.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Christoph Hellwig [Fri, 5 Feb 2021 10:19:34 +0000 (11:19 +0100)]
swiotlb: factor out a nr_slots helper
Factor out a helper to find the number of slots for a given size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Christoph Hellwig [Thu, 4 Feb 2021 09:11:20 +0000 (10:11 +0100)]
swiotlb: factor out an io_tlb_offset helper
Replace the very genericly named OFFSET macro with a little inline
helper that hardcodes the alignment to the only value ever passed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Christoph Hellwig [Fri, 5 Feb 2021 10:18:40 +0000 (11:18 +0100)]
swiotlb: add a IO_TLB_SIZE define
Add a new IO_TLB_SIZE define instead open coding it using
IO_TLB_SHIFT all over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Jianxiong Gao [Mon, 1 Feb 2021 18:30:15 +0000 (10:30 -0800)]
driver core: add a min_align_mask field to struct device_dma_parameters
Some devices rely on the address offset in a page to function
correctly (NVMe driver as an example). These devices may use
a different page size than the Linux kernel. The address offset
has to be preserved upon mapping, and in order to do so, we
need to record the page_offset_mask first.
Signed-off-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Christoph Hellwig [Thu, 4 Feb 2021 16:02:14 +0000 (17:02 +0100)]
sdhci: stop poking into swiotlb internals
Use the proper API to query the max mapping size instead of guessing
it based on swiotlb internals.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Linus Torvalds [Sun, 31 Jan 2021 21:50:09 +0000 (13:50 -0800)]
Linux 5.11-rc6
Linus Torvalds [Sun, 31 Jan 2021 19:57:37 +0000 (11:57 -0800)]
Merge tag 'efi-urgent-for-v5.11' of git://git./linux/kernel/git/tip/tip
Pull EFI fix from Borislav Petkov:
"A single fix from Lukas: handle boolean device properties imported
from Apple firmware correctly"
* tag 'efi-urgent-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/apple-properties: Reinstate support for boolean properties
Linus Torvalds [Sun, 31 Jan 2021 19:48:12 +0000 (11:48 -0800)]
Merge tag 'x86_entry_for_v5.11_rc6' of git://git./linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"A single fix for objtool to generate proper unwind info for newer
toolchains which do not generate section symbols anymore. And a
cleanup ontop.
This was originally going to go during the next merge window but
people can already trigger a build error with binutils-2.36 which
doesn't emit section symbols - something which objtool relies on - so
let's expedite it"
* tag 'x86_entry_for_v5.11_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Remove put_ret_addr_in_rdi THUNK macro argument
x86/entry: Emit a symbol for register restoring thunk
Linus Torvalds [Sun, 31 Jan 2021 19:40:57 +0000 (11:40 -0800)]
Merge tag 'timers-urgent-2021-01-31' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A fix for handling advertised, but non-existent 146818 RTCs correctly.
With the recent UIP handling changes the time readout of non-existent
RTCs hangs forever as the read returns always 0xFF which means the UIP
bit is set.
Sanity check the RTC before registering by checking the RTC_VALID
register for correctness"
* tag 'timers-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rtc: mc146818: Detect and handle broken RTCs
Linus Torvalds [Sun, 31 Jan 2021 19:39:32 +0000 (11:39 -0800)]
Merge tag 'core-urgent-2021-01-31' of git://git./linux/kernel/git/tip/tip
Pull single stepping fix from Thomas Gleixner:
"A single fix for the single step reporting regression caused by
getting the condition wrong when moving SYSCALL_EMU away from TIF
flags"
[ There's apparently another problem too, fix pending ]
* tag 'core-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Unbreak single step reporting behaviour
Linus Torvalds [Sun, 31 Jan 2021 19:37:43 +0000 (11:37 -0800)]
Merge tag 'powerpc-5.11-6' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One fix for a bug in our soft interrupt masking, which could lead to
interrupt replaying recursing, causing spurious interrupts.
Thanks to Nicholas Piggin"
* tag 'powerpc-5.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: prevent recursive replay_soft_interrupts causing superfluous interrupt
Linus Torvalds [Sun, 31 Jan 2021 19:33:27 +0000 (11:33 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"Just one I2C driver update this time"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mediatek: Move suspend and resume handling to NOIRQ phase
Linus Torvalds [Sun, 31 Jan 2021 19:23:35 +0000 (11:23 -0800)]
Merge branch 'for-rc-5.11' of git://git./linux/kernel/git/pavel/linux-leds
Pull LED fixes from Pavel Machek:
"This pull is due to 'leds: trigger: fix potential deadlock with
libata' -- people find the warn annoying.
It also contains new driver and two trivial fixes"
* 'for-rc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: rt8515: Add Richtek RT8515 LED driver
dt-bindings: leds: Add DT binding for Richtek RT8515
leds: trigger: fix potential deadlock with libata
leds: leds-ariel: convert comma to semicolon
leds: leds-lm3533: convert comma to semicolon
Linus Torvalds [Sun, 31 Jan 2021 19:19:12 +0000 (11:19 -0800)]
Merge tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
- SUNRPC: Handle 0 length opaque XDR object data properly
- Fix a layout segment leak in pnfs_layout_process()
- pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn
- pNFS/NFSv4: Improve rejection of out-of-order layouts
- pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()
* tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Handle 0 length opaque XDR object data properly
SUNRPC: Move simple_get_bytes and simple_get_netobj into private header
pNFS/NFSv4: Improve rejection of out-of-order layouts
pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn
pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()
pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()
Linus Walleij [Sat, 2 Jan 2021 23:15:10 +0000 (00:15 +0100)]
leds: rt8515: Add Richtek RT8515 LED driver
This adds a driver for the Richtek RT8515 dual channel
torch/flash white LED driver.
This LED driver is found in some mobile phones from
Samsung such as the GT-S7710 and GT-I8190.
A V4L interface is added.
We do not have a proper datasheet for the RT8515 but
it turns out that RT9387A has a public datasheet and
is essentially the same chip. We designed the driver
in accordance with this datasheet. The day someone
needs to drive a RT9387A this driver can probably
easily be augmented to handle that chip too.
Sakari Ailus, Pavel Machek and Andy Shevchenko helped
significantly in getting this driver right.
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: linux-media@vger.kernel.org
Cc: phone-devel@vger.kernel.org
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Linus Walleij [Sat, 2 Jan 2021 23:15:09 +0000 (00:15 +0100)]
dt-bindings: leds: Add DT binding for Richtek RT8515
Add a YAML devicetree binding for the Richtek RT8515
dual channel flash/torch LED driver.
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: phone-devel@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Andrea Righi [Wed, 25 Nov 2020 15:18:22 +0000 (16:18 +0100)]
leds: trigger: fix potential deadlock with libata
We have the following potential deadlock condition:
========================================================
WARNING: possible irq lock inversion dependency detected
5.10.0-rc2+ #25 Not tainted
--------------------------------------------------------
swapper/3/0 just changed the state of lock:
ffff8880063bd618 (&host->lock){-...}-{2:2}, at: ata_bmdma_interrupt+0x27/0x200
but this lock took another, HARDIRQ-READ-unsafe lock in the past:
(&trig->leddev_list_lock){.+.?}-{2:2}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&trig->leddev_list_lock);
local_irq_disable();
lock(&host->lock);
lock(&trig->leddev_list_lock);
<Interrupt>
lock(&host->lock);
*** DEADLOCK ***
no locks held by swapper/3/0.
the shortest dependencies between 2nd lock and 1st lock:
-> (&trig->leddev_list_lock){.+.?}-{2:2} ops: 46 {
HARDIRQ-ON-R at:
lock_acquire+0x15f/0x420
_raw_read_lock+0x42/0x90
led_trigger_event+0x2b/0x70
rfkill_global_led_trigger_worker+0x94/0xb0
process_one_work+0x240/0x560
worker_thread+0x58/0x3d0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
IN-SOFTIRQ-R at:
lock_acquire+0x15f/0x420
_raw_read_lock+0x42/0x90
led_trigger_event+0x2b/0x70
kbd_bh+0x9e/0xc0
tasklet_action_common.constprop.0+0xe9/0x100
tasklet_action+0x22/0x30
__do_softirq+0xcc/0x46d
run_ksoftirqd+0x3f/0x70
smpboot_thread_fn+0x116/0x1f0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
SOFTIRQ-ON-R at:
lock_acquire+0x15f/0x420
_raw_read_lock+0x42/0x90
led_trigger_event+0x2b/0x70
rfkill_global_led_trigger_worker+0x94/0xb0
process_one_work+0x240/0x560
worker_thread+0x58/0x3d0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
INITIAL READ USE at:
lock_acquire+0x15f/0x420
_raw_read_lock+0x42/0x90
led_trigger_event+0x2b/0x70
rfkill_global_led_trigger_worker+0x94/0xb0
process_one_work+0x240/0x560
worker_thread+0x58/0x3d0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
}
... key at: [<
ffffffff83da4c00>] __key.0+0x0/0x10
... acquired at:
_raw_read_lock+0x42/0x90
led_trigger_blink_oneshot+0x3b/0x90
ledtrig_disk_activity+0x3c/0xa0
ata_qc_complete+0x26/0x450
ata_do_link_abort+0xa3/0xe0
ata_port_freeze+0x2e/0x40
ata_hsm_qc_complete+0x94/0xa0
ata_sff_hsm_move+0x177/0x7a0
ata_sff_pio_task+0xc7/0x1b0
process_one_work+0x240/0x560
worker_thread+0x58/0x3d0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
-> (&host->lock){-...}-{2:2} ops: 69 {
IN-HARDIRQ-W at:
lock_acquire+0x15f/0x420
_raw_spin_lock_irqsave+0x52/0xa0
ata_bmdma_interrupt+0x27/0x200
__handle_irq_event_percpu+0xd5/0x2b0
handle_irq_event+0x57/0xb0
handle_edge_irq+0x8c/0x230
asm_call_irq_on_stack+0xf/0x20
common_interrupt+0x100/0x1c0
asm_common_interrupt+0x1e/0x40
native_safe_halt+0xe/0x10
arch_cpu_idle+0x15/0x20
default_idle_call+0x59/0x1c0
do_idle+0x22c/0x2c0
cpu_startup_entry+0x20/0x30
start_secondary+0x11d/0x150
secondary_startup_64_no_verify+0xa6/0xab
INITIAL USE at:
lock_acquire+0x15f/0x420
_raw_spin_lock_irqsave+0x52/0xa0
ata_dev_init+0x54/0xe0
ata_link_init+0x8b/0xd0
ata_port_alloc+0x1f1/0x210
ata_host_alloc+0xf1/0x130
ata_host_alloc_pinfo+0x14/0xb0
ata_pci_sff_prepare_host+0x41/0xa0
ata_pci_bmdma_prepare_host+0x14/0x30
piix_init_one+0x21f/0x600
local_pci_probe+0x48/0x80
pci_device_probe+0x105/0x1c0
really_probe+0x221/0x490
driver_probe_device+0xe9/0x160
device_driver_attach+0xb2/0xc0
__driver_attach+0x91/0x150
bus_for_each_dev+0x81/0xc0
driver_attach+0x1e/0x20
bus_add_driver+0x138/0x1f0
driver_register+0x91/0xf0
__pci_register_driver+0x73/0x80
piix_init+0x1e/0x2e
do_one_initcall+0x5f/0x2d0
kernel_init_freeable+0x26f/0x2cf
kernel_init+0xe/0x113
ret_from_fork+0x1f/0x30
}
... key at: [<
ffffffff83d9fdc0>] __key.6+0x0/0x10
... acquired at:
__lock_acquire+0x9da/0x2370
lock_acquire+0x15f/0x420
_raw_spin_lock_irqsave+0x52/0xa0
ata_bmdma_interrupt+0x27/0x200
__handle_irq_event_percpu+0xd5/0x2b0
handle_irq_event+0x57/0xb0
handle_edge_irq+0x8c/0x230
asm_call_irq_on_stack+0xf/0x20
common_interrupt+0x100/0x1c0
asm_common_interrupt+0x1e/0x40
native_safe_halt+0xe/0x10
arch_cpu_idle+0x15/0x20
default_idle_call+0x59/0x1c0
do_idle+0x22c/0x2c0
cpu_startup_entry+0x20/0x30
start_secondary+0x11d/0x150
secondary_startup_64_no_verify+0xa6/0xab
This lockdep splat is reported after:
commit
e918188611f0 ("locking: More accurate annotations for read_lock()")
To clarify:
- read-locks are recursive only in interrupt context (when
in_interrupt() returns true)
- after acquiring host->lock in CPU1, another cpu (i.e. CPU2) may call
write_lock(&trig->leddev_list_lock) that would be blocked by CPU0
that holds trig->leddev_list_lock in read-mode
- when CPU1 (ata_ac_complete()) tries to read-lock
trig->leddev_list_lock, it would be blocked by the write-lock waiter
on CPU2 (because we are not in interrupt context, so the read-lock is
not recursive)
- at this point if an interrupt happens on CPU0 and
ata_bmdma_interrupt() is executed it will try to acquire host->lock,
that is held by CPU1, that is currently blocked by CPU2, so:
* CPU0 blocked by CPU1
* CPU1 blocked by CPU2
* CPU2 blocked by CPU0
*** DEADLOCK ***
The deadlock scenario is better represented by the following schema
(thanks to Boqun Feng <boqun.feng@gmail.com> for the schema and the
detailed explanation of the deadlock condition):
CPU 0: CPU 1: CPU 2:
----- ----- -----
led_trigger_event():
read_lock(&trig->leddev_list_lock);
<workqueue>
ata_hsm_qc_complete():
spin_lock_irqsave(&host->lock);
write_lock(&trig->leddev_list_lock);
ata_port_freeze():
ata_do_link_abort():
ata_qc_complete():
ledtrig_disk_activity():
led_trigger_blink_oneshot():
read_lock(&trig->leddev_list_lock);
// ^ not in in_interrupt() context, so could get blocked by CPU 2
<interrupt>
ata_bmdma_interrupt():
spin_lock_irqsave(&host->lock);
Fix by using read_lock_irqsave/irqrestore() in led_trigger_event(), so
that no interrupt can happen in between, preventing the deadlock
condition.
Apply the same change to led_trigger_blink_setup() as well, since the
same deadlock scenario can also happen in power_supply_update_bat_leds()
-> led_trigger_blink() -> led_trigger_blink_setup() (workqueue context),
and potentially prevent other similar usages.
Link: https://lore.kernel.org/lkml/20201101092614.GB3989@xps-13-7390/
Fixes:
eb25cb9956cc ("leds: convert IDE trigger to common disk trigger")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Zheng Yongjun [Mon, 14 Dec 2020 13:45:45 +0000 (21:45 +0800)]
leds: leds-ariel: convert comma to semicolon
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Zheng Yongjun [Wed, 16 Dec 2020 13:16:53 +0000 (21:16 +0800)]
leds: leds-lm3533: convert comma to semicolon
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Linus Torvalds [Sun, 31 Jan 2021 01:51:06 +0000 (17:51 -0800)]
Merge tag '5.11-rc5-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Four cifs patches found in additional testing of the conversion to the
new mount API: three small option processing ones, and one fixing domain
based DFS referrals"
* tag '5.11-rc5-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix dfs domain referrals
cifs: returning mount parm processing errors correctly
cifs: fix mounts to subdirectories of target
cifs: ignore auto and noauto options if given
Linus Torvalds [Sun, 31 Jan 2021 01:42:42 +0000 (17:42 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two minor fixes in drivers. Both changing strings (one in a comment,
one in a module help text) with no code impact"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix description for parameter ql2xenforce_iocb_limit
scsi: target: iscsi: Fix typo in comment
Linus Torvalds [Sun, 31 Jan 2021 00:39:36 +0000 (16:39 -0800)]
Merge tag 'for-linus' of git://github.com/openrisc/linux
Pull OpenRISC fix from Stafford Horne:
"Fix config dependencies for Litex SOC driver causing issues on um"
* tag 'for-linus' of git://github.com/openrisc/linux:
soc: litex: Properly depend on HAS_IOMEM
Linus Torvalds [Sat, 30 Jan 2021 19:53:14 +0000 (11:53 -0800)]
Merge tag 'devicetree-fixes-for-5.11-2' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Cleanups on properties with standard unit suffixes
- Fix overwriting dma_range_map if there's no 'dma-ranges' property
- Fix a bug when creating a /chosen node from ARM ATAGs
- Add missing properties for TI j721e USB binding
- Several doc reference updates due to DT schema conversions
* tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Cleanup standard unit properties
of/device: Update dma_range_map only when dev has valid dma-ranges
ARM: zImage: atags_to_fdt: Fix node names on added root nodes
dt-bindings: usb: j721e: add ranges and dma-coherent props
dt-bindings:iio:adc: update adc.yaml reference
dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references
dt-bindings: display: mediatek: update mediatek,dpi.yaml reference
ASoC: audio-graph-card: update audio-graph-card.yaml reference
Linus Torvalds [Sat, 30 Jan 2021 19:48:57 +0000 (11:48 -0800)]
Merge tag 's390-5.11-4' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix max number of VCPUs reported via ultravisor information sysfs
interface.
- Fix memory leaks during vfio-ap resources clean up on KVM pointer
invalidation notification.
- Fix potential specification exception by avoiding unnecessary
interrupts disable after queue reset in vfio-ap.
* tag 's390-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: uv: Fix sysfs max number of VCPUs reporting
s390/vfio-ap: No need to disable IRQ after queue reset
s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated
Linus Torvalds [Sat, 30 Jan 2021 19:46:27 +0000 (11:46 -0800)]
Merge tag 'riscv-for-linus-5.11-rc6' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
"A fix to avoid initializing max_mapnr to be too large, which may
manifest on NUMA systems"
* tag 'riscv-for-linus-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fixup pfn_valid error with wrong max_mapnr
Rob Herring [Thu, 28 Jan 2021 19:45:15 +0000 (13:45 -0600)]
dt-bindings: Cleanup standard unit properties
Properties with standard unit suffixes already have a type and don't need
type definitions. They also default to a single entry, so 'maxItems: 1'
can be dropped.
adi,ad5758 is an oddball which defined an enum of arrays. While a valid
schema, it is simpler as a whole to only define scalar constraints.
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-input@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org> # for power-supply
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20210128194515.743252-1-robh@kernel.org
Linus Torvalds [Fri, 29 Jan 2021 21:59:24 +0000 (13:59 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix the virt_addr_valid() returning true for < PAGE_OFFSET addresses.
- Do not blindly trust the DMA masks from ACPI/IORT.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ACPI/IORT: Do not blindly trust DMA masks from firmware
arm64: Fix kernel address detection of __is_lm_address()
Linus Torvalds [Fri, 29 Jan 2021 21:54:40 +0000 (13:54 -0800)]
Merge tag 'for-5.11-rc5-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes for a late rc:
- fix lockdep complaint on 32bit arches and also remove an unsafe
memory use due to device vs filesystem lifetime
- two fixes for free space tree:
* race during log replay and cache rebuild, now more likely to
happen due to changes in this dev cycle
* possible free space tree corruption with online conversion
during initial tree population"
* tag 'for-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix log replay failure due to race with space cache rebuild
btrfs: fix lockdep warning due to seqcount_mutex on 32bit arch
btrfs: fix possible free space tree corruption with online conversion
Linus Torvalds [Fri, 29 Jan 2021 21:50:06 +0000 (13:50 -0800)]
Merge tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"All over the place fixes for this release:
- blk-cgroup iteration teardown resched fix (Baolin)
- NVMe pull request from Christoph:
- add another Write Zeroes quirk (Chaitanya Kulkarni)
- handle a no path available corner case (Daniel Wagner)
- use the proper RCU aware list_add helper (Chao Leng)
- bcache regression fix (Coly)
- bdev->bd_size_lock IRQ fix. This will be fixed in drivers for 5.12,
but for now, we'll make it IRQ safe (Damien)
- null_blk zoned init fix (Damien)
- add_partition() error handling fix (Dinghao)
- s390 dasd kobject fix (Jan)
- nbd fix for freezing queue while adding connections (Josef)
- tag queueing regression fix (Ming)
- revert of a patch that inadvertently meant that we regressed write
performance on raid (Maxim)"
* tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-block:
null_blk: cleanup zoned mode initialization
nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_head
nvme-multipath: Early exit if no path is available
nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a SPCC device
bcache: only check feature sets when sb->version >= BCACHE_SB_VERSION_CDEV_WITH_FEATURES
block: fix bd_size_lock use
blk-cgroup: Use cond_resched() when destroy blkgs
Revert "block: simplify set_init_blocksize" to regain lost performance
nbd: freeze the queue while we're adding connections
s390/dasd: Fix inconsistent kobject removal
block: Fix an error handling in add_partition
blk-mq: test QUEUE_FLAG_HCTX_ACTIVE for sbitmap_shared in hctx_may_queue
Linus Torvalds [Fri, 29 Jan 2021 21:47:47 +0000 (13:47 -0800)]
Merge tag 'io_uring-5.11-2021-01-29' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"We got the cancelation story sorted now, so for all intents and
purposes, this should be it for 5.11 outside of any potential little
fixes that may come in. This contains:
- task_work task state fixes (Hao, Pavel)
- Cancelation fixes (me, Pavel)
- Fix for an inflight req patch in this release (Pavel)
- Fix for a lock deadlock issue (Pavel)"
* tag 'io_uring-5.11-2021-01-29' of git://git.kernel.dk/linux-block:
io_uring: reinforce cancel on flush during exit
io_uring: fix sqo ownership false positive warning
io_uring: fix list corruption for splice file_get
io_uring: fix flush cqring overflow list while TASK_INTERRUPTIBLE
io_uring: fix wqe->lock/completion_lock deadlock
io_uring: fix cancellation taking mutex while TASK_UNINTERRUPTIBLE
io_uring: fix __io_uring_files_cancel() with TASK_UNINTERRUPTIBLE
io_uring: only call io_cqring_ev_posted() if events were posted
io_uring: if we see flush on exit, cancel related tasks
David Gow [Wed, 27 Jan 2021 03:36:04 +0000 (19:36 -0800)]
soc: litex: Properly depend on HAS_IOMEM
The LiteX SOC controller driver makes use of IOMEM functions like
devm_platform_ioremap_resource(), which are only available if
CONFIG_HAS_IOMEM is defined.
This causes the driver to be enable under make ARCH=um allyesconfig,
even though it won't build.
By adding a dependency on HAS_IOMEM, the driver will not be enabled on
architectures which don't support it.
Fixes:
22447a99c97e ("drivers/soc/litex: add LiteX SoC Controller driver")
Signed-off-by: David Gow <davidgow@google.com>
[shorne@gmail.com: Fix typo in commit message pointed out in review]
Signed-off-by: Stafford Horne <shorne@gmail.com>
Linus Torvalds [Fri, 29 Jan 2021 21:32:05 +0000 (13:32 -0800)]
Merge tag 'iommu-fixes-v5.11-rc5' of git://git./linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- AMD IOMMU fix to make sure features are detected before they are
queried.
- Intel IOMMU address alignment check fix for an IOLTB flushing
command.
- Performance fix for Intel IOMMU to make sure the code does not do
full IOTLB flushes all the time. Those flushes are very expensive
on emulated IOMMUs.
* tag 'iommu-fixes-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Do not use flush-queue when caching-mode is on
iommu/vt-d: Correctly check addr alignment in qi_flush_dev_iotlb_pasid()
iommu/amd: Use IVHD EFR for early initialization of IOMMU features
Linus Torvalds [Fri, 29 Jan 2021 21:30:09 +0000 (13:30 -0800)]
Merge tag 'pm-5.11-rc6' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a deadlock in the 'kexec jump' code and address a possible
hibernation image creation issue.
Specifics:
- Fix a deadlock caused by attempting to acquire the same mutex twice
in a row in the "kexec jump" code (Baoquan He)
- Modify the hibernation image saving code to flush the unwritten
data to the swap storage later so as to avoid failing to write the
image signature which is possible in some cases (Laurent Badel)"
* tag 'pm-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: flush swap writer after marking
kernel: kexec: remove the lock operation of system_transition_mutex
Linus Torvalds [Fri, 29 Jan 2021 21:23:21 +0000 (13:23 -0800)]
Merge tag 'acpi-5.11-rc6' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix the handling of notifications in the ACPI thermal driver and
address a device enumeration issue leading to the presence of multiple
'MODALIAS=' entries in one uevent file in sysfs in some cases.
Specifics:
- Modify the ACPI thermal driver to avoid evaluating _TMP directly in
its Notify () handler callback and running too many thermal checks
for one thermal zone at the same time so as to address a work item
accumulation issue observed on some systems that fail to shut down
as a result of it (Rafael Wysocki)
- Modify the ACPI uevent file creation code to avoid putting multiple
'MODALIAS=' entries in one uevent file in sysfs which breaks
systemd-udevd (Kai-Heng Feng)"
* tag 'acpi-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: thermal: Do not call acpi_thermal_check() directly
ACPI: sysfs: Prefer "compatible" modalias
Linus Torvalds [Fri, 29 Jan 2021 21:18:23 +0000 (13:18 -0800)]
Merge tag 'drm-fixes-2021-01-29' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Weekly fixes for graphics, nothing too major, nouveau has a few
regression fixes for various fallout from header changes previously,
vc4 has two fixes, two amdgpu, and a smattering of i915 fixes.
All seems on course for a quieter rc7, fingers crossed.
nouveau:
- fix svm init conditions
- fix nv50 modesetting regression
- fix cursor plane modifiers
- fix > 64x64 cursor regression
vc4:
- Fix LBM size calculation
- Fix high resolutions for hvs5
i915:
- Fix ICL MG PHY vswing
- Fix subplatform handling
- Fix selftest memleak
- Clear CACHE_MODE prior to clearing residuals
- Always flush the active worker before returning from the wait
- Always try to reserve GGTT address 0x0
amdgpu:
- Fix a fan control regression on some boards
- Fix clang warning"
* tag 'drm-fixes-2021-01-29' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors
drm/nouveau/kms/nv50-: Report max cursor size to userspace
drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes
drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices
drm/nouveau/dispnv50: Restore pushing of all data.
amdgpu: fix clang build warning
Revert "drm/amdgpu/swsmu: drop set_fan_speed_percent (v2)"
drm/i915/gt: Always try to reserve GGTT address 0x0
drm/i915: Always flush the active worker before returning from the wait
drm/i915/selftest: Fix potential memory leak
drm/i915: Check for all subplatform bits
drm/i915: Fix ICL MG PHY vswing handling
drm/i915/gt: Clear CACHE_MODE prior to clearing residuals
drm/vc4: Correct POS1_SCL for hvs5
drm/vc4: Correct lbm size and calculation
drm/nouveau/nvif: fix method count when pushing an array
Linus Torvalds [Fri, 29 Jan 2021 20:28:20 +0000 (12:28 -0800)]
tty: avoid using vfs_iocb_iter_write() for redirected console writes
It turns out that the vfs_iocb_iter_{read,write}() functions are
entirely broken, and don't actually use the passed-in file pointer for
IO - only for the preparatory work (permission checking and for the
write_iter function lookup).
That worked fine for overlayfs, which always builds the new iocb with
the same file pointer that it passes in, but in the general case it ends
up doing nonsensical things (and could cause an iterator call that
doesn't even match the passed-in file pointer).
This subtly broke the tty conversion to write_iter in commit
9bb48c82aced ("tty: implement write_iter"), because the console
redirection didn't actually end up redirecting anything, since the
passed-in file pointer was basically ignored, and the actual write was
done with the original non-redirected console tty after all.
The main visible effect of this is that the console messages were no
longer logged to /var/log/boot.log during graphical boot.
Fix the issue by simply not using the vfs write "helper" function at
all, and just redirecting the write entirely internally to the tty
layer. Do the target writability permission checks when actually
registering the target tty with TIOCCONS instead of at write time.
Fixes:
9bb48c82aced ("tty: implement write_iter")
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rafael J. Wysocki [Fri, 29 Jan 2021 15:28:48 +0000 (16:28 +0100)]
Merge branch 'acpi-sysfs'
* acpi-sysfs:
ACPI: sysfs: Prefer "compatible" modalias
Damien Le Moal [Fri, 29 Jan 2021 14:47:25 +0000 (23:47 +0900)]
null_blk: cleanup zoned mode initialization
To avoid potential compilation problems, replaced the badly written
MB_TO_SECTS() macro (missing parenthesis around the argument use) with
the inline function mb_to_sects(). And while at it, simplify the
calculation of the total number of zones of the device using the
round_up() macro.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ronnie Sahlberg [Fri, 29 Jan 2021 03:35:10 +0000 (21:35 -0600)]
cifs: fix dfs domain referrals
The new mount API requires additional changes to how DFS
is handled. Additional testing of DFS uncovered problems
with domain based DFS referrals (a follow on patch addresses
DFS links) which this patch addresses.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Fri, 29 Jan 2021 03:40:26 +0000 (19:40 -0800)]
Merge tag 'ecryptfs-5.11-rc6-setxattr-fix' of git://git./linux/kernel/git/tyhicks/ecryptfs
Pull ecryptfs fix from Tyler Hicks:
"Fix a regression that resulted in two rounds of UID translations when
setting v3 namespaced file capabilities in some configurations"
* tag 'ecryptfs-5.11-rc6-setxattr-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
ecryptfs: fix uid translation for setxattr on security.capability
Dave Airlie [Fri, 29 Jan 2021 01:36:38 +0000 (11:36 +1000)]
Merge tag 'amd-drm-fixes-5.11-2021-01-28' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.11-2021-01-28:
amdgpu:
- Fix a fan control regression on some boards
- Fix clang warning
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128191558.3821-1-alexander.deucher@amd.com
Dave Airlie [Fri, 29 Jan 2021 01:33:37 +0000 (11:33 +1000)]
Merge tag 'drm-intel-fixes-2021-01-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.11-rc6:
- Fix ICL MG PHY vswing
- Fix subplatform handling
- Fix selftest memleak
- Clear CACHE_MODE prior to clearing residuals
- Always flush the active worker before returning from the wait
- Always try to reserve GGTT address 0x0
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87y2gdi3mp.fsf@intel.com
Dave Airlie [Fri, 29 Jan 2021 01:32:30 +0000 (11:32 +1000)]
Merge tag 'drm-misc-fixes-2021-01-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull (less than what git shortlog provides):
* drm/vc4: Fix LBM size calculation; Fix high resolutions for hvs5
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YBEco1Vxeny8U/ca@linux-uq9g
Dave Airlie [Fri, 29 Jan 2021 01:05:41 +0000 (11:05 +1000)]
Merge branch '04.01-ampere-lite' of git://github.com/skeggsb/linux into drm-fixes
Mostly a regression fixes here, a couple of which could lead to
display hanging, and have been affecting a number of users.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv4Y0ZiAevSvgphLAOaZjFi75ECXqUD9ShBvRxZ6S-pb9Q@mail.gmail.com
Lyude Paul [Tue, 19 Jan 2021 01:54:14 +0000 (20:54 -0500)]
drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors
While we do handle the additional cursor sizes introduced in NVE4, it looks
like we accidentally broke this when converting over to use Nvidia's
display headers. Since we now use NVVAL in dispnv50/head907d.c in order to
format the value for the cursor layout and NVD9 only had one byte reserved
vs. the 2 bytes reserved in later generations, we end up accidentally
stripping the second bit in the cursor layout format parameter - causing us
to set the wrong cursor size.
This fixes that by adding our own curs_set hook for 917d which uses the
NV917D headers.
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: <stable@vger.kernel.org> # v5.9+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes:
ed0b86a90bf9 ("drm/nouveau/kms/nv50-: use NVIDIA's headers for core head_curs_set()")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Lyude Paul [Tue, 19 Jan 2021 01:54:13 +0000 (20:54 -0500)]
drm/nouveau/kms/nv50-: Report max cursor size to userspace
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Tested-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Lyude Paul [Tue, 19 Jan 2021 01:54:12 +0000 (20:54 -0500)]
drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes
Nvidia hardware doesn't actually support using tiling formats with the
cursor plane, only linear is allowed. In the future, we should write a
testcase for this.
Fixes:
c586f30bf74c ("drm/nouveau/kms: Add format mod prop to base/ovly/nvdisp")
Cc: James Jones <jajones@nvidia.com>
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: James Jones <jajones@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Karol Herbst [Mon, 18 Jan 2021 17:16:06 +0000 (18:16 +0100)]
drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices
Fixes a crash when trying to create a channel on e.g. Turing GPUs when
NOUVEAU_SVM_INIT was called before.
Fixes:
eeaf06ac1a558 ("drm/nouveau/svm: initial support for shared virtual memory")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Bastian Beranek [Thu, 21 Jan 2021 14:27:36 +0000 (15:27 +0100)]
drm/nouveau/dispnv50: Restore pushing of all data.
Commit
f844eb485eb056ad3b67e49f95cbc6c685a73db4 introduced a regression for
NV50, which lead to visual artifacts, tearing and eventual crashes.
In the changes of
f844eb485eb056ad3b67e49f95cbc6c685a73db4 only the first line
was correctly translated to the new NVIDIA header macros:
- PUSH_NVSQ(push, NV827C, 0x0110, 0,
- 0x0114, 0);
+ PUSH_MTHD(push, NV827C, SET_PROCESSING,
+ NVDEF(NV827C, SET_PROCESSING, USE_GAIN_OFS, DISABLE));
The lower part ("0x0114, 0") was probably omitted by accident.
This patch restores the push of the missing data and fixes the regression.
Signed-off-by: Bastian Beranek <bastian.beischer@rwth-aachen.de>
Fixes:
f844eb485eb05 ("drm/nouveau/kms/nv50-: use NVIDIA's headers for wndw image_set()")
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/14
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Pavel Begunkov [Thu, 28 Jan 2021 23:23:42 +0000 (23:23 +0000)]
io_uring: reinforce cancel on flush during exit
What
84965ff8a84f0 ("io_uring: if we see flush on exit, cancel related tasks")
really wants is to cancel all relevant REQ_F_INFLIGHT requests reliably.
That can be achieved by io_uring_cancel_files(), but we'll miss it
calling io_uring_cancel_task_requests(files=NULL) from io_uring_flush(),
because it will go through __io_uring_cancel_task_requests().
Just always call io_uring_cancel_files() during cancel, it's good enough
for now.
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Thu, 28 Jan 2021 23:24:43 +0000 (15:24 -0800)]
Merge tag 'net-5.11-rc6' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes including fixes from can, xfrm, wireless,
wireless-drivers and netfilter trees. Nothing scary, Intel
WiFi-related fixes seemed most notable to the users.
Current release - regressions:
- dsa: microchip: ksz8795: fix KSZ8794 port map again to program the
CPU port correctly
Current release - new code bugs:
- iwlwifi: pcie: reschedule in long-running memory reads
Previous releases - regressions:
- iwlwifi: dbg: don't try to overwrite read-only FW data
- iwlwifi: provide gso_type to GSO packets
- octeontx2: make sure the buffer is 128 byte aligned
- tcp: make TCP_USER_TIMEOUT accurate for zero window probes
- xfrm: fix wraparound in xfrm_policy_addr_delta()
- xfrm: fix oops in xfrm_replay_advance_bmp due to a race between
CPUs in presence of packet reorder
- tcp: fix TLP timer not set when CA_STATE changes from DISORDER to
OPEN
- wext: fix NULL-ptr-dereference with cfg80211's lack of commit()
Previous releases - always broken:
- igc: fix link speed advertising
- stmmac: configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA
addressing
- team: protect features update by RCU to avoid deadlock
- xfrm: fix disable_xfrm sysctl when used on xfrm interfaces
themselves
- fec: fix temporary RMII clock reset on link up
- can: dev: prevent potential information leak in can_fill_info()
Misc:
- mrp: fix bad packing of MRP test packet structures
- uapi: fix big endian definition of ipv6_rpl_sr_hdr
- add David Ahern to IPv4/IPv6 maintainers"
* tag 'net-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
rxrpc: Fix memory leak in rxrpc_lookup_local
mlxsw: spectrum_span: Do not overwrite policer configuration
selftests: forwarding: Specify interface when invoking mausezahn
stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing
net: usb: cdc_ether: added support for Thales Cinterion PLSx3 modem family.
ibmvnic: Ensure that CRQ entry read are correctly ordered
MAINTAINERS: add missing header for bonding
net: decnet: fix netdev refcount leaking on error path
net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP
can: dev: prevent potential information leak in can_fill_info()
net: fec: Fix temporary RMII clock reset on link up
net: lapb: Add locking to the lapb module
team: protect features update by RCU to avoid deadlock
MAINTAINERS: add David Ahern to IPv4/IPv6 maintainers
net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable
net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset
net/mlx5e: Revert parameters on errors when changing trust state without reset
net/mlx5e: Correctly handle changing the number of queues when the interface is down
net/mlx5e: Fix CT rule + encap slow path offload and deletion
net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled
...
Steve French [Thu, 28 Jan 2021 22:43:03 +0000 (16:43 -0600)]
cifs: returning mount parm processing errors correctly
During additional testing of the updated cifs.ko with the
new mount API support, we found a few additional cases where
we were logging errors, but not returning them to the user.
For example:
a) invalid security mechanisms
b) invalid cache options
c) unsupported rdma
d) invalid smb dialect requested
Fixes:
24e0a1eff9e2 ("cifs: switch to new mount api")
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Takeshi Misawa [Thu, 28 Jan 2021 10:48:36 +0000 (10:48 +0000)]
rxrpc: Fix memory leak in rxrpc_lookup_local
Commit
9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record")
Then release ref in __rxrpc_put_peer and rxrpc_put_peer_locked.
struct rxrpc_peer *rxrpc_alloc_peer(struct rxrpc_local *local, gfp_t gfp)
- peer->local = local;
+ peer->local = rxrpc_get_local(local);
rxrpc_discard_prealloc also need ref release in discarding.
syzbot report:
BUG: memory leak
unreferenced object 0xffff8881080ddc00 (size 256):
comm "syz-executor339", pid 8462, jiffies
4294942238 (age 12.350s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 0a 00 00 00 00 c0 00 08 81 88 ff ff ................
backtrace:
[<
000000002b6e495f>] kmalloc include/linux/slab.h:552 [inline]
[<
000000002b6e495f>] kzalloc include/linux/slab.h:682 [inline]
[<
000000002b6e495f>] rxrpc_alloc_local net/rxrpc/local_object.c:79 [inline]
[<
000000002b6e495f>] rxrpc_lookup_local+0x1c1/0x760 net/rxrpc/local_object.c:244
[<
000000006b43a77b>] rxrpc_bind+0x174/0x240 net/rxrpc/af_rxrpc.c:149
[<
00000000fd447a55>] afs_open_socket+0xdb/0x200 fs/afs/rxrpc.c:64
[<
000000007fd8867c>] afs_net_init+0x2b4/0x340 fs/afs/main.c:126
[<
0000000063d80ec1>] ops_init+0x4e/0x190 net/core/net_namespace.c:152
[<
00000000073c5efa>] setup_net+0xde/0x2d0 net/core/net_namespace.c:342
[<
00000000a6744d5b>] copy_net_ns+0x19f/0x3e0 net/core/net_namespace.c:483
[<
0000000017d3aec3>] create_new_namespaces+0x199/0x4f0 kernel/nsproxy.c:110
[<
00000000186271ef>] unshare_nsproxy_namespaces+0x9b/0x120 kernel/nsproxy.c:226
[<
000000002de7bac4>] ksys_unshare+0x2fe/0x5c0 kernel/fork.c:2957
[<
00000000349b12ba>] __do_sys_unshare kernel/fork.c:3025 [inline]
[<
00000000349b12ba>] __se_sys_unshare kernel/fork.c:3023 [inline]
[<
00000000349b12ba>] __x64_sys_unshare+0x12/0x20 kernel/fork.c:3023
[<
000000006d178ef7>] do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
[<
00000000637076d4>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record")
Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com>
Reported-and-tested-by: syzbot+305326672fed51b205f7@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/161183091692.3506637.3206605651502458810.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 28 Jan 2021 21:09:03 +0000 (13:09 -0800)]
Merge branch 'mlxsw-various-fixes'
Ido Schimmel says:
====================
mlxsw: Various fixes
Patch #1 fixes wrong invocation of mausezahn in a couple of selftests.
The tests started failing after Fedora updated their libnet package from
version 1.1.6 to 1.2.1. With the fix the tests pass regardless of libnet
version.
Patch #2 fixes an issue in the mirroring to CPU code that results in
policer configuration being overwritten.
====================
Link: https://lore.kernel.org/r/20210128144820.3280295-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Thu, 28 Jan 2021 14:48:20 +0000 (16:48 +0200)]
mlxsw: spectrum_span: Do not overwrite policer configuration
The purpose of the delayed work in the SPAN module is to potentially
update the destination port and various encapsulation parameters of SPAN
agents that point to a VLAN device or a GRE tap. The destination port
can change following the insertion of a new route, for example.
SPAN agents that point to a physical port or the CPU port are static and
never change throughout the lifetime of the SPAN agent. Therefore, skip
over them in the delayed work.
This fixes an issue where the delayed work overwrites the policer
that was set on a SPAN agent pointing to the CPU. Modifying the delayed
work to inherit the original policer configuration is error-prone, as
the same will be needed for any new parameter.
Fixes:
4039504e6a0c ("mlxsw: spectrum_span: Allow setting policer on a SPAN agent")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Danielle Ratson [Thu, 28 Jan 2021 14:48:19 +0000 (16:48 +0200)]
selftests: forwarding: Specify interface when invoking mausezahn
Specify the interface through which packets should be transmitted so
that the test will pass regardless of the libnet version against which
mausezahn is linked.
Fixes:
cab14d1087d9 ("selftests: Add version of router_multipath.sh using nexthop objects")
Fixes:
3d578d879517 ("selftests: forwarding: Test IPv4 weighted nexthops")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Voon Weifeng [Tue, 26 Jan 2021 10:08:44 +0000 (18:08 +0800)]
stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing
Fix an issue where dump stack is printed and Reset Adapter occurs when
PSE0 GbE or/and PSE1 GbE is/are enabled. EHL PSE0 GbE and PSE1 GbE use
32 bits DMA addressing whereas EHL PCH GbE uses 64 bits DMA addressing.
[ 25.535095] ------------[ cut here ]------------
[ 25.540276] NETDEV WATCHDOG: enp0s29f2 (intel-eth-pci): transmit queue 2 timed out
[ 25.548749] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x259/0x260
[ 25.558004] Modules linked in: 8021q bnep bluetooth ecryptfs snd_hda_codec_hdmi intel_gpy marvell intel_ishtp_loader intel_ishtp_hid iTCO_wdt mei_hdcp iTCO_vendor_support x86_pkg_temp_thermal kvm_intel dwmac_intel stmmac kvm igb pcs_xpcs irqbypass phylink snd_hda_intel intel_rapl_msr pcspkr dca snd_hda_codec i915 i2c_i801 i2c_smbus libphy intel_ish_ipc snd_hda_core mei_me intel_ishtp mei spi_dw_pci 8250_lpss spi_dw thermal dw_dmac_core parport_pc tpm_crb tpm_tis parport tpm_tis_core tpm intel_pmc_core sch_fq_codel uhid fuse configfs snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_sof_xtensa_dsp snd_sof snd_soc_acpi_intel_match snd_soc_acpi snd_intel_dspcfg ledtrig_audio snd_soc_core snd_compress ac97_bus snd_pcm snd_timer snd soundcore
[ 25.633795] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G U 5.11.0-rc4-intel-lts-MISMAIL5+ #5
[ 25.644306] Hardware name: Intel Corporation Elkhart Lake Embedded Platform/ElkhartLake LPDDR4x T4 RVP1, BIOS EHLSFWI1.R00.2434.A00.
2010231402 10/23/2020
[ 25.659674] RIP: 0010:dev_watchdog+0x259/0x260
[ 25.664650] Code: e8 3b 6b 60 ff eb 98 4c 89 ef c6 05 ec e7 bf 00 01 e8 fb e5 fa ff 89 d9 4c 89 ee 48 c7 c7 78 31 d2 9e 48 89 c2 e8 79 1b 18 00 <0f> 0b e9 77 ff ff ff 0f 1f 44 00 00 48 c7 47 08 00 00 00 00 48 c7
[ 25.685647] RSP: 0018:
ffffb7ca80160eb8 EFLAGS:
00010286
[ 25.691498] RAX:
0000000000000000 RBX:
0000000000000002 RCX:
0000000000000103
[ 25.699483] RDX:
0000000080000103 RSI:
00000000000000f6 RDI:
00000000ffffffff
[ 25.707465] RBP:
ffff985709ce0440 R08:
0000000000000000 R09:
c0000000ffffefff
[ 25.715455] R10:
ffffb7ca80160cf0 R11:
ffffb7ca80160ce8 R12:
ffff985709ce039c
[ 25.723438] R13:
ffff985709ce0000 R14:
0000000000000008 R15:
ffff9857068af940
[ 25.731425] FS:
0000000000000000(0000) GS:
ffff985864300000(0000) knlGS:
0000000000000000
[ 25.740481] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 25.746913] CR2:
00005567f8bb76b8 CR3:
00000001f8e0a000 CR4:
0000000000350ee0
[ 25.754900] Call Trace:
[ 25.757631] <IRQ>
[ 25.759891] ? qdisc_put_unlocked+0x30/0x30
[ 25.764565] ? qdisc_put_unlocked+0x30/0x30
[ 25.769245] call_timer_fn+0x2e/0x140
[ 25.773346] run_timer_softirq+0x1f3/0x430
[ 25.777932] ? __hrtimer_run_queues+0x12c/0x2c0
[ 25.783005] ? ktime_get+0x3e/0xa0
[ 25.786812] __do_softirq+0xa6/0x2ef
[ 25.790816] asm_call_irq_on_stack+0xf/0x20
[ 25.795501] </IRQ>
[ 25.797852] do_softirq_own_stack+0x5d/0x80
[ 25.802538] irq_exit_rcu+0x94/0xb0
[ 25.806475] sysvec_apic_timer_interrupt+0x42/0xc0
[ 25.811836] asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 25.817586] RIP: 0010:cpuidle_enter_state+0xd9/0x370
[ 25.823142] Code: 85 c0 0f 8f 0a 02 00 00 31 ff e8 22 d5 7e ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 47 02 00 00 31 ff e8 7b a0 84 ff fb 45 85 f6 <0f> 88 ab 00 00 00 49 63 ce 48 2b 2c 24 48 89 c8 48 6b d1 68 48 c1
[ 25.844140] RSP: 0018:
ffffb7ca800f7e80 EFLAGS:
00000206
[ 25.849996] RAX:
ffff985864300000 RBX:
0000000000000003 RCX:
000000000000001f
[ 25.857975] RDX:
00000005f2028ea8 RSI:
ffffffff9ec5907f RDI:
ffffffff9ec62a5d
[ 25.865961] RBP:
00000005f2028ea8 R08:
0000000000000000 R09:
0000000000029d00
[ 25.873947] R10:
000000137b0e0508 R11:
ffff9858643294e4 R12:
ffff9858643336d0
[ 25.881935] R13:
ffffffff9ef74b00 R14:
0000000000000003 R15:
0000000000000000
[ 25.889918] cpuidle_enter+0x29/0x40
[ 25.893922] do_idle+0x24a/0x290
[ 25.897536] cpu_startup_entry+0x19/0x20
[ 25.901930] start_secondary+0x128/0x160
[ 25.906326] secondary_startup_64_no_verify+0xb0/0xbb
[ 25.911983] ---[ end trace
b4c0c8195d0ba61f ]---
[ 25.917193] intel-eth-pci 0000:00:1d.2 enp0s29f2: Reset adapter.
Fixes:
67c08ac4140a ("net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID")
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Co-developed-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Link: https://lore.kernel.org/r/20210126100844.30326-1-mohammad.athari.ismail@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Giacinto Cifelli [Tue, 26 Jan 2021 04:42:45 +0000 (05:42 +0100)]
net: usb: cdc_ether: added support for Thales Cinterion PLSx3 modem family.
lsusb -v for this device:
Bus 003 Device 007: ID 1e2d:0069
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x1e2d
idProduct 0x0069
bcdDevice 0.00
iManufacturer 4 Cinterion Wireless Modules
iProduct 3 PLSx3
iSerial 5
fa3c1419
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 352
bNumInterfaces 10
bConfigurationValue 1
iConfiguration 2 Cinterion Configuration
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 500mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 2
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 3
CDC Union:
bMasterInterface 2
bSlaveInterface 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 4
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 5
CDC Union:
bMasterInterface 4
bSlaveInterface 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 5
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 6
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 6
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 7
CDC Union:
bMasterInterface 6
bSlaveInterface 7
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 7
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 8
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 0
bFunctionProtocol 0
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 8
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 6 Ethernet Networking
bInterfaceProtocol 0
iInterface 0
CDC Header:
bcdCDC 1.10
CDC Ethernet:
iMacAddress 1
00A0C6C14190
bmEthernetStatistics 0x00000000
wMaxSegmentSize 16384
wNumberMCFilters 0x0001
bNumberPowerFilters 0
CDC Union:
bMasterInterface 8
bSlaveInterface 9
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x89 EP 9 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 9
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 9
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8a EP 10 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Signed-off-by: Giacinto Cifelli <gciofono@gmail.com>
Link: https://lore.kernel.org/r/20210126044245.8455-1-gciofono@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 28 Jan 2021 19:18:43 +0000 (11:18 -0800)]
Merge tag 'locking-urgent-2021-01-28' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of PI futex fixes:
- Address a longstanding issue where the user space part of the PI
futex is not writeable. The kernel returns with inconsistent state
which can in the worst case result in a UAF of a tasks kernel
stack.
The solution is to establish consistent kernel state which makes
future operations on the futex fail because user space and kernel
space state are inconsistent. Not a problem as PI futexes
fundamentaly require a functional RW mapping and if user space
pulls the rug under it, then it can keep the pieces it asked for.
- Address an issue where the return value is incorrect in case that
the futex was acquired after a timeout/signal made the waiter drop
out of the rtmutex wait.
In one of the corner cases the kernel returned an error code
despite having successfully acquired the futex"
* tag 'locking-urgent-2021-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Handle faults correctly for PI futexes
futex: Simplify fixup_pi_state_owner()
futex: Use pi_state_update_owner() in put_pi_state()
rtmutex: Remove unused argument from rt_mutex_proxy_unlock()
futex: Provide and use pi_state_update_owner()
futex: Replace pointless printk in fixup_owner()
futex: Ensure the correct return value from futex_lock_pi()
Jens Axboe [Thu, 28 Jan 2021 18:57:33 +0000 (11:57 -0700)]
Merge tag 'nvme-5.11-2021-01-28' of git://git.infradead.org/nvme into block-5.11
Pull NVMe fixes from Christoph:
"nvme fixes for 5.11:
- add another Write Zeroes quirk (Chaitanya Kulkarni)
- handle a no path available corner case (Daniel Wagner)
- use the proper RCU aware list_add helper (Chao Leng)"
* tag 'nvme-5.11-2021-01-28' of git://git.infradead.org/nvme:
nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_head
nvme-multipath: Early exit if no path is available
nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a SPCC device
Pavel Begunkov [Thu, 28 Jan 2021 18:39:25 +0000 (18:39 +0000)]
io_uring: fix sqo ownership false positive warning
WARNING: CPU: 0 PID: 21359 at fs/io_uring.c:9042
io_uring_cancel_task_requests+0xe55/0x10c0 fs/io_uring.c:9042
Call Trace:
io_uring_flush+0x47b/0x6e0 fs/io_uring.c:9227
filp_close+0xb4/0x170 fs/open.c:1295
close_files fs/file.c:403 [inline]
put_files_struct fs/file.c:418 [inline]
put_files_struct+0x1cc/0x350 fs/file.c:415
exit_files+0x7e/0xa0 fs/file.c:435
do_exit+0xc22/0x2ae0 kernel/exit.c:820
do_group_exit+0x125/0x310 kernel/exit.c:922
get_signal+0x427/0x20f0 kernel/signal.c:2773
arch_do_signal_or_restart+0x2a8/0x1eb0 arch/x86/kernel/signal.c:811
handle_signal_work kernel/entry/common.c:147 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x148/0x250 kernel/entry/common.c:201
__syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
syscall_exit_to_user_mode+0x19/0x50 kernel/entry/common.c:302
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Now io_uring_cancel_task_requests() can be called not through file
notes but directly, remove a WARN_ONCE() there that give us false
positives. That check is not very important and we catch it in other
places.
Fixes:
84965ff8a84f0 ("io_uring: if we see flush on exit, cancel related tasks")
Cc: stable@vger.kernel.org # 5.9+
Reported-by: syzbot+3e3d9bd0c6ce9efbc3ef@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Thu, 28 Jan 2021 18:39:24 +0000 (18:39 +0000)]
io_uring: fix list corruption for splice file_get
kernel BUG at lib/list_debug.c:29!
Call Trace:
__list_add include/linux/list.h:67 [inline]
list_add include/linux/list.h:86 [inline]
io_file_get+0x8cc/0xdb0 fs/io_uring.c:6466
__io_splice_prep+0x1bc/0x530 fs/io_uring.c:3866
io_splice_prep fs/io_uring.c:3920 [inline]
io_req_prep+0x3546/0x4e80 fs/io_uring.c:6081
io_queue_sqe+0x609/0x10d0 fs/io_uring.c:6628
io_submit_sqe fs/io_uring.c:6705 [inline]
io_submit_sqes+0x1495/0x2720 fs/io_uring.c:6953
__do_sys_io_uring_enter+0x107d/0x1f30 fs/io_uring.c:9353
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
io_file_get() may be called from splice, and so REQ_F_INFLIGHT may
already be set.
Fixes:
02a13674fa0e8 ("io_uring: account io_uring internal files as REQ_F_INFLIGHT")
Cc: stable@vger.kernel.org # 5.9+
Reported-by: syzbot+6879187cf57845801267@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Arnd Bergmann [Mon, 25 Jan 2021 12:23:20 +0000 (13:23 +0100)]
amdgpu: fix clang build warning
clang warns about the -mhard-float command line arguments
on architectures that do not support this:
clang: error: argument unused during compilation: '-mhard-float' [-Werror,-Wunused-command-line-argument]
Move this into the gcc-specific arguments.
Fixes:
e77165bf7b02 ("drm/amd/display: Add DCN3 blocks to Makefile")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 28 Jan 2021 18:28:59 +0000 (13:28 -0500)]
Revert "drm/amdgpu/swsmu: drop set_fan_speed_percent (v2)"
On some boards the rpm interface apparently does not work at all
leading to the fan not spinning or spinning at strange speeds.
Revert this for now to fix 5.10, 5.11. The follow on patch
fixes this properly for 5.12.
This reverts commit
8d6e65adc25e23fabbc5293b6cd320195c708dca.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1408
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Chao Leng [Thu, 28 Jan 2021 03:33:51 +0000 (11:33 +0800)]
nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_head
The "list" of nvme_ns_head is used as rcu list, now in nvme_init_ns_head
list_add_tail is used to add ns->siblings to the rcu list. It is not safe.
Should use list_add_tail_rcu instead of list_add_tail.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Daniel Wagner [Wed, 27 Jan 2021 10:30:33 +0000 (11:30 +0100)]
nvme-multipath: Early exit if no path is available
nvme_round_robin_path() should test if the return ns pointer is valid.
nvme_next_ns() will return a NULL pointer if there is no path left.
Fixes:
75c10e732724 ("nvme-multipath: round-robin I/O policy")
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Chaitanya Kulkarni [Tue, 26 Jan 2021 05:19:16 +0000 (21:19 -0800)]
nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a SPCC device
This adds a quirk for SPCC 256GB NVMe 1.3 drive which fixes timeouts and
I/O errors due to the fact that the controller does not properly
handle the Write Zeroes command:
[ 2745.659527] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G E 5.10.6-BET #1
[ 2745.659528] Hardware name: System manufacturer System Product Name/PRIME X570-P, BIOS 3001 12/04/2020
[ 2776.138874] nvme nvme1: I/O 414 QID 3 timeout, aborting
[ 2776.138886] nvme nvme1: I/O 415 QID 3 timeout, aborting
[ 2776.138891] nvme nvme1: I/O 416 QID 3 timeout, aborting
[ 2776.138895] nvme nvme1: I/O 417 QID 3 timeout, aborting
[ 2776.138912] nvme nvme1: Abort status: 0x0
[ 2776.138921] nvme nvme1: I/O 428 QID 3 timeout, aborting
[ 2776.138922] nvme nvme1: Abort status: 0x0
[ 2776.138925] nvme nvme1: Abort status: 0x0
[ 2776.138974] nvme nvme1: Abort status: 0x0
[ 2776.138977] nvme nvme1: Abort status: 0x0
[ 2806.346792] nvme nvme1: I/O 414 QID 3 timeout, reset controller
[ 2806.363566] nvme nvme1: 15/0/0 default/read/poll queues
[ 2836.554298] nvme nvme1: I/O 415 QID 3 timeout, disable controller
[ 2836.672064] blk_update_request: I/O error, dev nvme1n1, sector 16350 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672072] blk_update_request: I/O error, dev nvme1n1, sector 16093 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672074] blk_update_request: I/O error, dev nvme1n1, sector 15836 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672076] blk_update_request: I/O error, dev nvme1n1, sector 15579 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672078] blk_update_request: I/O error, dev nvme1n1, sector 15322 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672080] blk_update_request: I/O error, dev nvme1n1, sector 15065 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672082] blk_update_request: I/O error, dev nvme1n1, sector 14808 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672083] blk_update_request: I/O error, dev nvme1n1, sector 14551 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672085] blk_update_request: I/O error, dev nvme1n1, sector 14294 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672087] blk_update_request: I/O error, dev nvme1n1, sector 14037 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 2836.672121] nvme nvme1: failed to mark controller live state
[ 2836.672123] nvme nvme1: Removing after probe failure status: -19
[ 2836.689016] Aborting journal on device dm-0-8.
[ 2836.689024] Buffer I/O error on dev dm-0, logical block
25198592, lost sync page write
[ 2836.689027] JBD2: Error -5 detected when updating journal superblock for dm-0-8.
Reported-by: Bradley Chapman <chapman6235@comcast.net>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Tested-by: Bradley Chapman <chapman6235@comcast.net>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Linus Torvalds [Thu, 28 Jan 2021 18:08:08 +0000 (10:08 -0800)]
Merge tag 'for-linus-5.11-rc6-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A fix for a regression introduced in 5.11 resulting in Xen dom0
having problems to correctly initialize Xenstore.
- A fix for avoiding WARN splats when booting as Xen dom0 with
CONFIG_AMD_MEM_ENCRYPT enabled due to a missing trap handler for the
#VC exception (even if the handler should never be called).
- A fix for the Xen bklfront driver adapting to the correct but
unexpected behavior of new qemu.
* tag 'for-linus-5.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabled
xen: Fix XenStore initialisation for XS_LOCAL
xen-blkfront: allow discard-* nodes to be optional
Linus Torvalds [Thu, 28 Jan 2021 18:00:26 +0000 (10:00 -0800)]
Merge tag 'asm-generic-fixes-v5.11' of git://git./linux/kernel/git/arnd/asm-generic
Pull ia64 fixes from Arnd Bergmann:
"asm-generic/ia64 fixes, and mark as orphaned
Commit
2b49ddcef297 ("ia64: convert to legacy_timer_tick") from my
timer series I merged through the asm-generic tree caused a regression
on all ia64 machines, as bisected by Adrian Glaubitz.
Tony Luck is no longer really working on ia64, so instead of merging
the fix through his tree, we ended up deciding that I'd merge the fix
myself along a patch to mark the architecture as Orphaned and a
compile time warning fix I made while working on the regression"
[ HPE no longer accepts orders for new Itanium hardware, and Intel
stopped accepting orders a year ago. While intel is still officially
shipping chips until July 29, 2021, it's unlikely that any such orders
actually exist.
It's dead, Jim.
- Linus ]
* tag 'asm-generic-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
ia64: Mark architecture as orphaned
ia64: fix xchg() warning
ia64: fix timer cleanup regression
Linus Torvalds [Thu, 28 Jan 2021 17:57:33 +0000 (09:57 -0800)]
Merge tag 'arm-soc-fixes-v5.11-2' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are the current arm-soc bug fixes for linux-5.11. I already
merged a larger set that just came in during the past three days but
has not had much exposure in linux-next, but this is the subset I
merged last week.
Most of these are for the NXP i.MX platform (descriptions from their
pull request):
- Fix pcf2127 reset for imx7d-flex-concentrator board.
- Fix i.MX6 suspend with Thumb-2 kernel.
- Fix ethernet-phy address issue on imx6qdl-sr-som board.
- Fix GPIO3 `gpio-ranges` on i.MX8MP.
- Select SOC_BUS for IMX_SCU driver to fix build issue.
- Fix backlight pwm on imx6qdl-kontron-samx6i which is lost from
#pwm-cells conversion.
- Fix duplicated bus node name for i.MX8MN SoC.
- Fix reset register offset on LS1028A SoC.
- Rename MMC node aliases for imx6q-tbs2910 to keep the MMC device
index consistent with previous kernel version.
- Selecting ARM_GIC_V3 on non-CP15 processors to fix one build
failure with i.MX8M SoC driver.
- Fix typos with status property on imx6qdl-kontron-samx6i board.
- Fix duplicated regulator-name on imx6qdl-gw52xx board.
Aside from i.MX, the bugfixes are all over the place:
- Coccinelle found a refcount imbalance on integrator
- defconfig fix for TI K3
- A boot regression fix for ST ux500
- A code preemption fix for the optee driver
- USB DMA regression on Broadcom Stingray
- A bogus boot time warning fix for at91 code"
* tag 'arm-soc-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Include bcm2835 subsequents into search
arm64: dts: broadcom: Fix USB DMA address translation for Stingray
drivers: soc: atmel: add null entry at the end of at91_soc_allowed_list[]
drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs
tee: optee: replace might_sleep with cond_resched
firmware: imx: select SOC_BUS to fix firmware build
arm64: dts: imx8mp: Correct the gpio ranges of gpio3
ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms
ARM: imx: build suspend-imx6.S with arm instruction set
ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset
ARM: dts: ux500: Reserve memory carveouts
arm64: defconfig: Drop unused K3 SoC specific options
bus: arm-integrator-lm: Add of_node_put() before return statement
ARM: dts: imx6qdl-gw52xx: fix duplicate regulator naming
ARM: dts: imx6qdl-kontron-samx6i: fix i2c_lcd/cam default status
ARM: imx: fix imx8m dependencies
ARM: dts: tbs2910: rename MMC node aliases
arm64: dts: ls1028a: fix the offset of the reset register
arm64: dts: imx8mn: Fix duplicate node name
ARM: dts: imx6qdl-kontron-samx6i: fix pwms for lcd-backlight
Linus Torvalds [Thu, 28 Jan 2021 17:27:26 +0000 (09:27 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Several recent regressions and some bug fixes:
- Typo corrupting the max_recv_sge for cxgb4
- Regression from re-using kernel enums as a HW AbI in vmw_pvrdma
- Sleeping inside a spinlock in hns
- Revert the attempt to fix devlink deadlocks as the fix is more buggy
- Typo in sysfs_emit_at conversions
- Revert the removal of VLAN support in rxe"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
Revert "RDMA/rxe: Remove VLAN code leftovers from RXE"
RDMA/usnic: Fix misuse of sysfs_emit_at
Revert "RDMA/mlx5: Fix devlink deadlock on net namespace deletion"
RDMA/hns: Use mutex instead of spinlock for ida allocation
RDMA/vmw_pvrdma: Fix network_hdr_type reported in WC
RDMA/cxgb4: Fix the reported max_recv_sge value
Linus Torvalds [Thu, 28 Jan 2021 17:23:01 +0000 (09:23 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- NULL pointer dereference regression fix for Wacom driver (Jason
Gerecke)
- functional regression fix for pam handling on some Elan and Synaptics
touchpads (Kai-Heng Feng)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: wacom: Correct NULL dereference on AES pen proximity
HID: multitouch: Apply MT_QUIRK_CONFIDENCE quirk for multi-input devices
Steve French [Thu, 28 Jan 2021 17:20:22 +0000 (11:20 -0600)]
cifs: fix mounts to subdirectories of target
The "prefixpath" mount option needs to be ignored
which was missed in the recent conversion to the
new mount API (prefixpath would be set by the mount
helper if mounting a subdirectory of the root of a
share e.g. //server/share/subdir)
Fixes:
24e0a1eff9e2 ("cifs: switch to new mount api")
Suggested-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Linus Torvalds [Thu, 28 Jan 2021 17:18:05 +0000 (09:18 -0800)]
Merge tag 'media/v5.11-2' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- a V4L2 core regression at videobuf2 when checking for single-plane
dmabuf
- a change at uAPI header v4l2-subdev.h, fixing a breakage as BIT()
macro is not available in userspace
- fix some regressions at RC core due to the usage of microseconds
everywhere on it
- a fix for a race condition at RC core
- a rename on a newly-introduced kAPI symbol (v4l2_get_link_rate),
currently used only by a single driver
- Regression fixes for rcar-vin, cedrus, ite-cir, hantro, css, venus,
and cec drivers.
* tag 'media/v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: hantro: Fix reset_raw_fmt initialization
media: cec: add stm32 driver
media: cedrus: Fix H264 decoding
media: v4l2-subdev.h: BIT() is not available in userspace
media: Revert "media: videobuf2: Fix length check for single plane dmabuf queueing"
media: rc: ite-cir: fix min_timeout calculation
media: venus: core: Fix platform driver shutdown
media: rc: fix timeout handling after switch to microsecond durations
media: v4l: common: Fix naming of v4l2_get_link_rate
media: rcar-vin: fix return, use ret instead of zero
media: ccs: Get static data version minor correctly
media: ccs-pll: Fix link frequency for C-PHY
media: rc: ensure that uevent can be read directly after rc device register
Linus Torvalds [Thu, 28 Jan 2021 17:14:58 +0000 (09:14 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of clk driver fixes:
- Build fix for CONFIG_PM=n in the mmp2 driver
- Kconfig warning for unmet dependencies in the i.MX driver
- Make the camera AHB clk always be enabled on qcom sc7180
- Use rate round down semantics for qcom sm8250 SD clks"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mmp2: fix build without CONFIG_PM
clk: qcom: gcc-sm250: Use floor ops for sdcc clks
clk: imx: fix Kconfig warning for i.MX SCU clk
clk: qcom: gcc-sc7180: Mark the camera abh clock always ON
Linus Torvalds [Thu, 28 Jan 2021 17:06:52 +0000 (09:06 -0800)]
Merge tag 'sound-5.11-rc6' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Although the incoming fixes haven't settled down yet, all changes here
are small and mostly device-specific fixes, so nothing look worrisome.
- Yet another USB-audio regression fixes
- HD-audio ID fix and device-specific quirks
- SOF Intel / SoundWire fixes including topology
- ASoC Qualcomm and Mediatek fixes"
* tag 'sound-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ALSA: hda/via: Apply the workaround generically for Clevo machines
ASoC: Intel: sof_sdw: set proper flags for Dell TGL-H SKU 0A5E
ASoC: qcom: lpass: Fix out-of-bounds DAI ID lookup
ASoC: mediatek: mt8192-mt6359: add format constraints for RT5682
ASoC: ak4458: correct reset polarity
ASoC: SOF: SND_INTEL_DSP_CONFIG dependency
ASoC: SOF: Intel: soundwire: fix select/depend unmet dependencies
ALSA: hda: intel-dsp-config: add PCI id for TGL-H
ALSA: usb-audio: workaround for iface reset issue
ALSA: pcm: One more dependency for hw constraints
ALSA: hda/realtek: Enable headset of ASUS B1400CEPE with ALC256
ASoC: Intel: Skylake: Zero snd_ctl_elem_value
ASoC: Intel: Skylake: skl-topology: Fix OOPs ib skl_tplg_complete
ASoC: qcom: Fix number of HDMI RDMA channels on sc7180
ASoC: mediatek: mt8183-da7219: ignore TDM DAI link by default
ASoC: mediatek: mt8183-mt6358: ignore TDM DAI link by default
ASoC: topology: Properly unregister DAI on removal
ASoC: topology: Fix memory corruption in soc_tplg_denum_create_values()
ASoC: qcom: lpass-ipq806x: fix bitwidth regmap field
ASoC: AMD Renoir - refine DMI entries for some Lenovo products
...
Wang Hai [Thu, 28 Jan 2021 11:32:50 +0000 (19:32 +0800)]
Revert "mm/slub: fix a memory leak in sysfs_slab_add()"
This reverts commit
dde3c6b72a16c2db826f54b2d49bdea26c3534a2.
syzbot report a double-free bug. The following case can cause this bug.
- mm/slab_common.c: create_cache(): if the __kmem_cache_create() fails,
it does:
out_free_cache:
kmem_cache_free(kmem_cache, s);
- but __kmem_cache_create() - at least for slub() - will have done
sysfs_slab_add(s)
-> sysfs_create_group() .. fails ..
-> kobject_del(&s->kobj); .. which frees s ...
We can't remove the kmem_cache_free() in create_cache(), because other
error cases of __kmem_cache_create() do not free this.
So, revert the commit
dde3c6b72a16 ("mm/slub: fix a memory leak in
sysfs_slab_add()") to fix this.
Reported-by: syzbot+d0bd96b4696c1ef67991@syzkaller.appspotmail.com
Fixes:
dde3c6b72a16 ("mm/slub: fix a memory leak in sysfs_slab_add()")
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adam Harvey [Wed, 27 Jan 2021 21:44:35 +0000 (13:44 -0800)]
cifs: ignore auto and noauto options if given
In
24e0a1eff9e2, the noauto and auto options were missed when migrating
to the new mount API. As a result, users with noauto in their fstab
mount options are now unable to mount cifs filesystems, as they'll
receive an "Unknown parameter" error.
This restores the old behaviour of ignoring noauto and auto if they're
given.
Fixes:
24e0a1eff9e2 ("cifs: switch to new mount api")
Signed-off-by: Adam Harvey <adam@adamharvey.name>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coly Li [Thu, 28 Jan 2021 10:48:47 +0000 (18:48 +0800)]
bcache: only check feature sets when sb->version >= BCACHE_SB_VERSION_CDEV_WITH_FEATURES
For super block version < BCACHE_SB_VERSION_CDEV_WITH_FEATURES, it
doesn't make sense to check the feature sets. This patch checks
super block version in bch_has_feature_* routines, if the version
doesn't have feature sets yet, returns 0 (false) to the caller.
Fixes:
5342fd425502 ("bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET")
Fixes:
ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket")
Cc: stable@vger.kernel.org # 5.9+
Reported-and-tested-by: Bockholdt Arne <a.bockholdt@precitec-optronik.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Thu, 28 Jan 2021 06:36:19 +0000 (15:36 +0900)]
block: fix bd_size_lock use
Some block device drivers, e.g. the skd driver, call set_capacity() with
IRQ disabled. This results in lockdep ito complain about inconsistent
lock states ("inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage")
because set_capacity takes a block device bd_size_lock using the
functions spin_lock() and spin_unlock(). Ensure a consistent locking
state by replacing these calls with spin_lock_irqsave() and
spin_lock_irqrestore(). The same applies to bdev_set_nr_sectors().
With this fix, all lockdep complaints are resolved.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Baolin Wang [Thu, 28 Jan 2021 05:58:15 +0000 (13:58 +0800)]
blk-cgroup: Use cond_resched() when destroy blkgs
On !PREEMPT kernel, we can get below softlockup when doing stress
testing with creating and destroying block cgroup repeatly. The
reason is it may take a long time to acquire the queue's lock in
the loop of blkcg_destroy_blkgs(), or the system can accumulate a
huge number of blkgs in pathological cases. We can add a need_resched()
check on each loop and release locks and do cond_resched() if true
to avoid this issue, since the blkcg_destroy_blkgs() is not called
from atomic contexts.
[ 4757.010308] watchdog: BUG: soft lockup - CPU#11 stuck for 94s!
[ 4757.010698] Call trace:
[ 4757.010700] blkcg_destroy_blkgs+0x68/0x150
[ 4757.010701] cgwb_release_workfn+0x104/0x158
[ 4757.010702] process_one_work+0x1bc/0x3f0
[ 4757.010704] worker_thread+0x164/0x468
[ 4757.010705] kthread+0x108/0x138
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nadav Amit [Wed, 27 Jan 2021 17:53:17 +0000 (09:53 -0800)]
iommu/vt-d: Do not use flush-queue when caching-mode is on
When an Intel IOMMU is virtualized, and a physical device is
passed-through to the VM, changes of the virtual IOMMU need to be
propagated to the physical IOMMU. The hypervisor therefore needs to
monitor PTE mappings in the IOMMU page-tables. Intel specifications
provide "caching-mode" capability that a virtual IOMMU uses to report
that the IOMMU is virtualized and a TLB flush is needed after mapping to
allow the hypervisor to propagate virtual IOMMU mappings to the physical
IOMMU. To the best of my knowledge no real physical IOMMU reports
"caching-mode" as turned on.
Synchronizing the virtual and the physical IOMMU tables is expensive if
the hypervisor is unaware which PTEs have changed, as the hypervisor is
required to walk all the virtualized tables and look for changes.
Consequently, domain flushes are much more expensive than page-specific
flushes on virtualized IOMMUs with passthrough devices. The kernel
therefore exploited the "caching-mode" indication to avoid domain
flushing and use page-specific flushing in virtualized environments. See
commit
78d5f0f500e6 ("intel-iommu: Avoid global flushes with caching
mode.")
This behavior changed after commit
13cf01744608 ("iommu/vt-d: Make use
of iova deferred flushing"). Now, when batched TLB flushing is used (the
default), full TLB domain flushes are performed frequently, requiring
the hypervisor to perform expensive synchronization between the virtual
TLB and the physical one.
Getting batched TLB flushes to use page-specific invalidations again in
such circumstances is not easy, since the TLB invalidation scheme
assumes that "full" domain TLB flushes are performed for scalability.
Disable batched TLB flushes when caching-mode is on, as the performance
benefit from using batched TLB invalidations is likely to be much
smaller than the overhead of the virtual-to-physical IOMMU page-tables
synchronization.
Fixes:
13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing")
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210127175317.1600473-1-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Yuxuan Shui [Sat, 23 Jan 2021 11:21:32 +0000 (03:21 -0800)]
entry: Unbreak single step reporting behaviour
The move of TIF_SYSCALL_EMU to SYSCALL_WORK_SYSCALL_EMU broke single step
reporting. The original code reported the single step when TIF_SINGLESTEP
was set and TIF_SYSCALL_EMU was not set. The SYSCALL_WORK conversion got
the logic wrong and now the reporting only happens when both bits are set.
Restore the original behaviour.
[ tglx: Massaged changelog and dropped the pointless double negation ]
Fixes:
64eb35f701f0 ("ptrace: Migrate TIF_SYSCALL_EMU to use SYSCALL_WORK flag")
Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Link: https://lore.kernel.org/r/877do3gaq9.fsf@m5Zedd9JOGzJrf0
Lu Baolu [Tue, 19 Jan 2021 04:35:00 +0000 (12:35 +0800)]
iommu/vt-d: Correctly check addr alignment in qi_flush_dev_iotlb_pasid()
An incorrect address mask is being used in the qi_flush_dev_iotlb_pasid()
to check the address alignment. This leads to a lot of spurious kernel
warnings:
[ 485.837093] DMAR: Invalidate non-aligned address
7f76f47f9000, order 0
[ 485.837098] DMAR: Invalidate non-aligned address
7f76f47f9000, order 0
[ 492.494145] qi_flush_dev_iotlb_pasid: 5734 callbacks suppressed
[ 492.494147] DMAR: Invalidate non-aligned address
7f7728800000, order 11
[ 492.508965] DMAR: Invalidate non-aligned address
7f7728800000, order 11
Fix it by checking the alignment in right way.
Fixes:
288d08e780088 ("iommu/vt-d: Handle non-page aligned address")
Reported-and-tested-by: Guo Kaijie <Kaijie.Guo@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20210119043500.1539596-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Suravee Suthikulpanit [Wed, 20 Jan 2021 13:50:02 +0000 (07:50 -0600)]
iommu/amd: Use IVHD EFR for early initialization of IOMMU features
IOMMU Extended Feature Register (EFR) is used to communicate
the supported features for each IOMMU to the IOMMU driver.
This is normally read from the PCI MMIO register offset 0x30,
and used by the iommu_feature() helper function.
However, there are certain scenarios where the information is needed
prior to PCI initialization, and the iommu_feature() function is used
prematurely w/o warning. This has caused incorrect initialization of IOMMU.
This is the case for the commit
6d39bdee238f ("iommu/amd: Enforce 4k
mapping for certain IOMMU data structures")
Since, the EFR is also available in the IVHD header, and is available to
the driver prior to PCI initialization. Therefore, default to using
the IVHD EFR instead.
Fixes:
6d39bdee238f ("iommu/amd: Enforce 4k mapping for certain IOMMU data structures")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20210120135002.2682-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Qii Wang [Sat, 9 Jan 2021 08:29:50 +0000 (16:29 +0800)]
i2c: mediatek: Move suspend and resume handling to NOIRQ phase
Some i2c device driver indirectly uses I2C driver when it is now
being suspended. The i2c devices driver is suspended during the
NOIRQ phase and this cannot be changed due to other dependencies.
Therefore, we also need to move the suspend handling for the I2C
controller driver to the NOIRQ phase as well.
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Jakub Kicinski [Thu, 28 Jan 2021 03:18:37 +0000 (19:18 -0800)]
Merge tag 'mlx5-fixes-2021-01-26' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2021-01-26
This series introduces some fixes to mlx5 driver.
* tag 'mlx5-fixes-2021-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable
net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset
net/mlx5e: Revert parameters on errors when changing trust state without reset
net/mlx5e: Correctly handle changing the number of queues when the interface is down
net/mlx5e: Fix CT rule + encap slow path offload and deletion
net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled
net/mlx5: Maintain separate page trees for ECPF and PF functions
net/mlx5e: Fix IPSEC stats
net/mlx5e: Reduce tc unsupported key print level
net/mlx5e: free page before return
net/mlx5e: E-switch, Fix rate calculation for overflow
net/mlx5: Fix memory leak on flow table creation error flow
====================
Link: https://lore.kernel.org/r/20210126234345.202096-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lijun Pan [Thu, 28 Jan 2021 01:34:42 +0000 (19:34 -0600)]
ibmvnic: Ensure that CRQ entry read are correctly ordered
Ensure that received Command-Response Queue (CRQ) entries are
properly read in order by the driver. dma_rmb barrier has
been added before accessing the CRQ descriptor to ensure
the entire descriptor is read before processing.
Fixes:
032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20210128013442.88319-1-ljp@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 28 Jan 2021 01:53:45 +0000 (17:53 -0800)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Honor stateful expressions defined in the set from the dynset
extension. The set definition provides a stateful expression
that must be used by the dynset expression in case it is specified.
2) Missing timeout extension in the set element in the dynset
extension leads to inconsistent ruleset listing, not allowing
the user to restore timeout and expiration on ruleset reload.
3) Do not dump the stateful expression from the dynset extension
if it coming from the set definition.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nft_dynset: dump expressions when set definition contains no expressions
netfilter: nft_dynset: add timeout extension to template
netfilter: nft_dynset: honor stateful expressions in set definition
====================
Link: https://lore.kernel.org/r/20210127132512.5472-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 28 Jan 2021 01:51:45 +0000 (17:51 -0800)]
Merge tag 'linux-can-fixes-for-5.11-
20210127' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2021-01-27
The patch is by Dan Carpenter and fixes a potential information leak in
can_fill_info().
* tag 'linux-can-fixes-for-5.11-
20210127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: dev: prevent potential information leak in can_fill_info()
====================
Link: https://lore.kernel.org/r/20210127094028.2778793-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 27 Jan 2021 02:18:44 +0000 (18:18 -0800)]
MAINTAINERS: add missing header for bonding
include/net/bonding.h is missing from bonding entry.
Link: https://lore.kernel.org/r/20210127021844.4071706-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 28 Jan 2021 01:44:51 +0000 (17:44 -0800)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue
Anthony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-01-26
This series contains updates to the ice, i40e, and igc driver.
Henry corrects setting an unspecified protocol to IPPROTO_NONE instead of
0 for IPv6 flexbytes filters for ice.
Nick fixes the IPv6 extension header being processed incorrectly and
updates the netdev->dev_addr if it exists in hardware as it may have been
modified outside the ice driver.
Brett ensures a user cannot request more channels than available LAN MSI-X
and fixes the minimum allocation logic as it was incorrectly trying to use
more MSI-X than allocated for ice.
Stefan Assmann minimizes the delay between getting and using the VSI
pointer to prevent a possible crash for i40e.
Corinna Vinschen fixes link speed advertising for igc.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: fix link speed advertising
i40e: acquire VSI pointer only after VF is initialized
ice: Fix MSI-X vector fallback logic
ice: Don't allow more channels than LAN MSI-X available
ice: update dev_addr in ice_set_mac_address even if HW filter exists
ice: Implement flow for IPv6 next header (extension header)
ice: fix FDir IPv6 flexbyte
====================
Link: https://lore.kernel.org/r/20210126221035.658124-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vadim Fedorenko [Tue, 26 Jan 2021 00:02:14 +0000 (03:02 +0300)]
net: decnet: fix netdev refcount leaking on error path
On building the route there is an assumption that the destination
could be local. In this case loopback_dev is used to get the address.
If the address is still cannot be retrieved dn_route_output_slow
returns EADDRNOTAVAIL with loopback_dev reference taken.
Cannot find hash for the fixes tag because this code was introduced
long time ago. I don't think that this bug has ever fired but the
patch is done just to have a consistent code base.
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Link: https://lore.kernel.org/r/1611619334-20955-1-git-send-email-vfedorenko@novek.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rasmus Villemoes [Mon, 25 Jan 2021 12:41:16 +0000 (13:41 +0100)]
net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP
It's not true that switchdev_port_obj_notify() only inspects the
->handled field of "struct switchdev_notifier_port_obj_info" if
call_switchdev_blocking_notifiers() returns 0 - there's a WARN_ON()
triggering for a non-zero return combined with ->handled not being
true. But the real problem here is that -EOPNOTSUPP is not being
properly handled.
The wrapper functions switchdev_handle_port_obj_add() et al change a
return value of -EOPNOTSUPP to 0, and the treatment of ->handled in
switchdev_port_obj_notify() seems to be designed to change that back
to -EOPNOTSUPP in case nobody actually acted on the notifier (i.e.,
everybody returned -EOPNOTSUPP).
Currently, as soon as some device down the stack passes the check_cb()
check, ->handled gets set to true, which means that
switchdev_port_obj_notify() cannot actually ever return -EOPNOTSUPP.
This, for example, means that the detection of hardware offload
support in the MRP code is broken: switchdev_port_obj_add() used by
br_mrp_switchdev_send_ring_test() always returns 0, so since the MRP
code thinks the generation of MRP test frames has been offloaded, no
such frames are actually put on the wire. Similarly,
br_mrp_switchdev_set_ring_role() also always returns 0, causing
mrp->ring_role_offloaded to be set to 1.
To fix this, continue to set ->handled true if any callback returns
success or any error distinct from -EOPNOTSUPP. But if all the
callbacks return -EOPNOTSUPP, make sure that ->handled stays false, so
the logic in switchdev_port_obj_notify() can propagate that
information.
Fixes:
9a9f26e8f7ea ("bridge: mrp: Connect MRP API with the switchdev API")
Fixes:
f30f0601eb93 ("switchdev: Add helpers to aid traversal through lower devices")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Link: https://lore.kernel.org/r/20210125124116.102928-1-rasmus.villemoes@prevas.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / platform / kernel / linux-rpi.git / log