drm/mipi-dsi: Fix detach call without attach

[ Upstream commit 90d50b8d85834e73536fdccd5aa913b30494fef0 ]

It's been reported that DSI host driver's detach can be called without
the attach ever happening:

https://lore.kernel.org/all/20230412073954.20601-1-tony@atomide.com/

After reading the code, I think this is what happens:

We have a DSI host defined in the device tree and a DSI peripheral under
that host (i.e. an i2c device using the DSI as data bus doesn't exhibit
this behavior).

The host driver calls mipi_dsi_host_register(), which causes (via a few
functions) mipi_dsi_device_add() to be called for the DSI peripheral. So
now we have a DSI device under the host, but attach hasn't been called.

Normally the probing of the devices continues, and eventually the DSI
peripheral's driver will call mipi_dsi_attach(), attaching the
peripheral.

However, if the host driver's probe encounters an error after calling
mipi_dsi_host_register(), and before the peripheral has called
mipi_dsi_attach(), the host driver will do cleanups and return an error
from its probe function. The cleanups include calling
mipi_dsi_host_unregister().

mipi_dsi_host_unregister() will call two functions for all its DSI
peripheral devices: mipi_dsi_detach() and mipi_dsi_device_unregister().
The latter makes sense, as the device exists, but the former may be
wrong as attach has not necessarily been done.

To fix this, track the attached state of the peripheral, and only detach
from mipi_dsi_host_unregister() if the peripheral was attached.

Note that I have only tested this with a board with an i2c DSI
peripheral, not with a "pure" DSI peripheral.

However, slightly related, the unregister machinery still seems broken.
E.g. if the DSI host driver is unbound, it'll detach and unregister the
DSI peripherals. After that, when the DSI peripheral driver unbound
it'll call detach either directly or using the devm variant, leading to
a crash. And probably the driver will crash if it happens, for some
reason, to try to send a message via the DSI bus.

But that's another topic.

Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921-dsi-detach-fix-v1-1-d0de2d1621d9@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/framebuffer: Fix use of uninitialized variable

[ Upstream commit f9af8f0c1dc567a5a6a6318ff324c45d80d4a60f ]

smatch reports:

drivers/gpu/drm/drm_framebuffer.c:654 drm_mode_getfb2_ioctl() error: uninitialized symbol 'ret'.

'ret' is possibly not set when there are no errors, causing the error
above. I can't say if that ever happens in real-life, but in any case I
think it is good to initialize 'ret' to 0.

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103-uninit-fixes-v2-2-c22b2444f5f5@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/drm_file: fix use of uninitialized variable

[ Upstream commit 1d3062fad9c7313fff9970a88e0538a24480ffb8 ]

smatch reports:

drivers/gpu/drm/drm_file.c:967 drm_show_memory_stats() error: uninitialized symbol 'supported_status'.

'supported_status' is only set in one code path. I'm not familiar with
the code to say if that path will always be ran in real life, but
whether that is the case or not, I think it is good to initialize
'supported_status' to 0 to silence the warning (and possibly fix a bug).

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103-uninit-fixes-v2-1-c22b2444f5f5@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix MST PBN/X.Y value calculations

[ Upstream commit 94bbf802efd0a8f13147d6664af6e653637340a8 ]

Changing PBN calculation to be more in line with spec. We don't need to
inflate PBN_NATIVE value by the 1.006 margin, since that is already
taken care of in the get_pbn_per_slot function.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: amd: Add new dmi entries for acp5x platform

[ Upstream commit c3ab23a10771bbe06300e5374efa809789c65455 ]

Add sys_vendor and product_name dmi entries for acp5x platform.

Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20231206110620.1695591-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix write pointers on zoned device after roll forward

[ Upstream commit 9dad4d964291295ef48243d4e03972b85138bc9f ]

1. do roll forward recovery
2. update current segments pointers
3. fix the entire zones' write pointers
4. do checkpoint

Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix tiled display misalignment

[ Upstream commit c4b8394e76adba4f50a3c2696c75b214a291e24a ]

[Why]
When otg workaround is applied during clock update, otgs of
tiled display went out of sync.

[How]
To call dc_trigger_sync() after clock update to sync otgs again.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: anx7625: Fix Set HPD irq detect window to 2ms

[ Upstream commit e3af7053de3f685c96158373bc234b2feca1f160 ]

Polling firmware HPD GPIO status, set HPD irq detect window to 2ms
after firmware HPD GPIO initial done

Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120091038.284825-2-xji@analogixsemi.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel-edp: Add override_edid_mode quirk for generic edp

[ Upstream commit 9f7843b515811aea6c56527eb195b622e9c01f12 ]

Generic edp gets mode from edid. However, some panels report incorrect
mode in this way, resulting in glitches on panel. Introduce a new quirk
additional_mode to the generic edid to pick a correct hardcoded mode.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231117215056.1883314-2-hsinyi@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/IPoIB: Fix error code return in ipoib_mcast_join

[ Upstream commit 753fff78f430704548f45eda52d6d55371a52c0f ]

Return the error code in case of ib_sa_join_multicast fail.

Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20231121130316.126364-2-jinpu.wang@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

reiserfs: Avoid touching renamed directory if parent does not change

[ Upstream commit 49db9b1b86a82448dfaf3fcfefcf678dee56c8ed ]

The VFS will not be locking moved directory if its parent does not
change. Change reiserfs rename code to avoid touching renamed directory
if its parent does not change as without locking that can corrupt the
filesystem.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fast_dput(): handle underflows gracefully

[ Upstream commit 504e08cebe1d4e1efe25f915234f646e74a364a8 ]

If refcount is less than 1, we should just warn, unlock dentry and
return true, so that the caller doesn't try to do anything else.

Taking care of that leaves the rest of "lockref_put_return() has
failed" case equivalent to "decrement refcount and rejoin the
normal slow path after the point where we grab ->d_lock".

NOTE: lockref_put_return() is strictly a fastpath thing - unlike
the rest of lockref primitives, it does not contain a fallback.
Caller (and it looks like fast_dput() is the only legitimate one
in the entire kernel) has to do that itself.  Reasons for
lockref_put_return() failures:
* ->d_lock held by somebody
* refcount <= 0
* ... or an architecture not supporting lockref use of
cmpxchg - sparc, anything non-SMP, config with spinlock debugging...

We could add a fallback, but it would be a clumsy API - we'd have
to distinguish between:
(1) refcount > 1 - decremented, lock not held on return
(2) refcount < 1 - left alone, probably no sense to hold the lock
(3) refcount is 1, no cmphxcg - decremented, lock held on return
(4) refcount is 1, cmphxcg supported - decremented, lock *NOT* held
    on return.
We want to return with no lock held in case (4); that's the whole point of that
thing.  We very much do not want to have the fallback in case (3) return without
a lock, since the caller might have to retake it in that case.
So it wouldn't be more convenient than doing the fallback in the caller and
it would be very easy to screw up, especially since the test coverage would
suck - no way to test (3) and (4) on the same kernel build.

Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: doc: Fix undefined SND_SOC_DAPM_NOPM argument

[ Upstream commit 67c7666fe808c3a7af3cc6f9d0a3dd3acfd26115 ]

The virtual widget example makes use of an undefined SND_SOC_DAPM_NOPM
argument passed to SND_SOC_DAPM_MIXER().  Replace with the correct
SND_SOC_NOPM definition.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20231121120751.77355-1-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: Refer to correct stream index at loops

[ Upstream commit 26257869672fd4a06a60c2da841e15fb2cb47bbe ]

In a couple of loops over the all streams, we check the bitmap against
the loop counter.  A more correct reference would be, however, the
index of each stream, instead.

This patch corrects the check of bitmaps to the stream index.

Note that this change doesn't fix anything for now; all existing
drivers set up the stream indices properly, hence the loop count is
always equal with the stream index.  That said, this change is only
for consistency.

Link: https://lore.kernel.org/r/20231121154125.4888-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to check return value of f2fs_reserve_new_block()

[ Upstream commit 956fa1ddc132e028f3b7d4cf17e6bfc8cb36c7fd ]

Let's check return value of f2fs_reserve_new_block() in do_recover_data()
rather than letting it fails silently.

Also refactoring check condition on return value of f2fs_reserve_new_block()
as below:
- trigger f2fs_bug_on() only for ENOSPC case;
- use do-while statement to avoid redundant codes;

Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: qca8k: put MDIO bus OF node on qca8k_mdio_register() failure

[ Upstream commit 68e1010cda7967cfca9c8650ee1f4efcae54ab90 ]

of_get_child_by_name() gives us an OF node with an elevated refcount,
which should be dropped when we're done with it. This is so that,
if (of_node_check_flag(node, OF_DYNAMIC)) is true, the node's memory can
eventually be freed.

There are 2 distinct paths to be considered in qca8k_mdio_register():

- devm_of_mdiobus_register() succeeds: since commit 3b73a7b8ec38 ("net:
  mdio_bus: add refcounting for fwnodes to mdiobus"), the MDIO core
  treats this well.

- devm_of_mdiobus_register() or anything up to that point fails: it is
  the duty of the qca8k driver to release the OF node.

This change addresses the second case by making sure that the OF node
reference is not leaked.

The "mdio" node may be NULL, but of_node_put(NULL) is safe.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: kcm: fix direct access to bv_len

[ Upstream commit b15a4cfe100b9acd097d3ae7052448bd1cdc2a3b ]

Minor fix for kcm: code wanting to access the fields inside an skb
frag should use the skb_frag_*() helpers, instead of accessing the
fields directly.

Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://lore.kernel.org/r/20240102205959.794513-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Fix max NPC MCAM entry check while validating ref_entry

[ Upstream commit 4ebb1f95e0c3c3e0eec5bb21aa43097580c4b6e4 ]

As of today, the last MCAM entry was not getting allocated because of
a <= check with the max_bmap count. This patch modifies that and if the
requested entry is greater than the available entries then set it to the
max value.

Signed-off-by: Suman Ghosh <sumang@marvell.com>
Link: https://lore.kernel.org/r/20240101145042.419697-1-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix VF disable behavior to block all traffic

[ Upstream commit 31deb12e85c35ddd2c037f0107d05d8674cab2c0 ]

Currently, if a VF is disabled using the
'ip link set dev $ETHX vf $VF_NUM state disable' command, the VF is still
able to receive traffic.

Fix the behavior of the 'ip link set dev $ETHX vf $VF_NUM state disable'
to completely shutdown the VF's queues making it entirely disabled and
not able to receive or send any traffic.

Modify the behavior of the 'ip link set $ETHX vf $VF_NUM state enable'
command to make a VF do reinitialization bringing the queues back up.

Co-developed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: sprd: Change UMS512 idle-state nodename to match bindings

[ Upstream commit 1cff7243334f851b7dddf450abdaa6223a7a28e3 ]

Fix below dtbs_check warning:

idle-states: 'core-pd' does not match any of the regexes: '^(cpu|cluster)-', 'pinctrl-[0-9]+'

Link: https://lore.kernel.org/r/20231221092824.1169453-3-chunyan.zhang@unisoc.com
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: sprd: Add clock reference for pll2 on UMS512

[ Upstream commit 829e3e70fe72edc084fbfc4964669594ebe427ce ]

Fix below dtbs_check warning:

'clocks' is a dependency of 'clock-names'

Link: https://lore.kernel.org/r/20231221092824.1169453-2-chunyan.zhang@unisoc.com
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bridge: cfm: fix enum typo in br_cc_ccm_tx_parse

[ Upstream commit c2b2ee36250d967c21890cb801e24af4b6a9eaa5 ]

It appears that there is a typo in the code where the nlattr array is
being parsed with policy br_cfm_cc_ccm_tx_policy, but the instance is
being accessed via IFLA_BRIDGE_CFM_CC_RDI_INSTANCE, which is associated
with the policy br_cfm_cc_rdi_policy.

This problem was introduced by commit 2be665c3940d ("bridge: cfm: Netlink
SET configuration Interface.").

Though it seems like a harmless typo since these two enum owns the exact
same value (1 here), it is quite misleading hence fix it by using the
correct enum IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE here.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: disable SEID on non-s390 archs where virtual ISM may be used

[ Upstream commit c6b8b8eb49904018e22e4e4b1fa502e57dc747d9 ]

The system EID (SEID) is an internal EID used by SMC-D to represent the
s390 physical machine that OS is executing on. On s390 architecture, it
predefined by fixed string and part of cpuid and is enabled regardless
of whether underlay device is virtual ISM or platform firmware ISM.

However on non-s390 architectures where SMC-D can be used with virtual
ISM devices, there is no similar information to identify physical
machines, especially in virtualization scenarios. So in such cases, SEID
is forcibly disabled and the user-defined UEID will be used to represent
the communicable space.

Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-and-tested-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: L2CAP: Fix possible multiple reject send

[ Upstream commit 96a3398b467ab8aada3df2f3a79f4b7835d068b8 ]

In case of an incomplete command or a command with a null identifier 2
reject packets will be sent, one with the identifier and one with 0.
Consuming the data of the command will prevent it.
This allows to send a reject packet for each corrupted command in a
multi-command packet.

Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_sync: fix BR/EDR wakeup bug

[ Upstream commit d4b70ba1eab450eff9c5ef536f07c01d424b7eda ]

when Bluetooth set the event mask and enter suspend, the controller
has hci mode change event coming, it cause controller can not enter
sleep mode. so it should to set the hci mode change event mask before
enter suspend.

Signed-off-by: clancy shang <clancy.shang@quectel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: ISO: Avoid creating child socket if PA sync is terminating

[ Upstream commit 9f150019f176078144b02c4b9b9dbe7fd5a2fcc3 ]

When a PA sync socket is closed, the associated hcon is also unlinked
and cleaned up. If there are no other hcons marked with the
HCI_CONN_PA_SYNC flag, HCI_OP_LE_PA_TERM_SYNC is sent to controller.

Between the time of the command and the moment PA sync is terminated
in controller, residual BIGInfo reports might continue to come.
This causes a new PA sync hcon to be added, and a new socket to be
notified to user space.

This commit fixs this by adding a flag on a Broadcast listening
socket to mark when the PA sync child has been closed.

This flag is checked when BIGInfo reports are indicated in
iso_connect_ind, to avoid recreating a hcon and socket if
residual reports arrive before PA sync is terminated.

Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: qca: Set both WIDEBAND_SPEECH and LE_STATES quirks for QCA2066

[ Upstream commit 5d192b697c7417254cdd9edc3d5e9e0364eb9045 ]

Set both WIDEBAND_SPEECH_SUPPORTED and VALID_LE_STATES quirks
for QCA2066.

Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211: free beacon_ies when overridden from hidden BSS

[ Upstream commit 32af9a9e1069e55bc02741fb00ac9d0ca1a2eaef ]

This is a more of a cosmetic fix. The branch will only be taken if
proberesp_ies is set, which implies that beacon_ies is not set unless we
are connected to an AP that just did a channel switch. And, in that case
we should have found the BSS in the internal storage to begin with.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.b898e22dadff.Id8c4c10aedd176ef2e18a4cad747b299f150f9df@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtlwifi: rtl8723{be,ae}: using calculate_bit_shift()

[ Upstream commit 5c16618bc06a41ad68fd8499a21d35ef57ca06c2 ]

Using calculate_bit_shift() to replace rtl8723_phy_calculate_bit_shift().
And fix an undefined bitwise shift behavior problem.

Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-12-suhui@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix NULL pointer dereference in bpf_object__collect_prog_relos

[ Upstream commit fc3a5534e2a8855427403113cbeb54af5837bbe0 ]

An issue occurred while reading an ELF file in libbpf.c during fuzzing:

Program received signal SIGSEGV, Segmentation fault.
0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206
4206 in libbpf.c
(gdb) bt
#0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206
#1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706
#2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437
#3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497
#4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16
#5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one ()
#6 0x000000000087ad92 in tracing::span::Span::in_scope ()
#7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir ()
#8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} ()
#9 0x00000000005f2601 in main ()
(gdb)

scn_data was null at this code(tools/lib/bpf/src/libbpf.c):

if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) {

The scn_data is derived from the code above:

scn = elf_sec_by_idx(obj, sec_idx);
scn_data = elf_sec_data(obj, scn);

relo_sec_name = elf_sec_str(obj, shdr->sh_name);
sec_name = elf_sec_name(obj, scn);
if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL
return -EINVAL;

In certain special scenarios, such as reading a malformed ELF file,
it is possible that scn_data may be a null pointer

Signed-off-by: Mingyi Zhang <zhangmingyi5@huawei.com>
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Changye Wu <wuchangye@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231221033947.154564-1-liuxin350@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtw89: coex: Fix wrong Wi-Fi role info and FDDT parameter members

[ Upstream commit acc55d7dd4de525ac07e43e90ea3cc630677ec8a ]

The Wi-Fi firmware 29.29.X should use version 2 role info format. FDDT
mechanism version 5 use the same cell members to judge traffic situation,
don't need to add another new format.

Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231218061341.51255-2-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtl8xxxu: Add additional USB IDs for RTL8192EU devices

[ Upstream commit 4e87ca403e2008b9e182239e1abbf6876a55eb33 ]

Add additional USB IDs found in the vendor driver from
https://github.com/Mange/rtl8192eu-linux-driver to support more
RTL8192EU devices.

Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231217123017.1982-1-zenmchen@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: amlogic: fix format for s4 uart node

[ Upstream commit eb54ef36282f670c704ed5af8593da62bebba80d ]

Aliases use lowercase letters and place status in end.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231215-s4-dts-v1-1-7831ab6972be@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: fix pre-shifted bit usage

[ Upstream commit 7173be21ae29ef50ada42fd4464056a9d3f55bb3 ]

While converting to FIELD_PREP() and FIELD_GET(), it was noticed that
some of the RSS defines had *included* the shift in their definitions.
This is completely outside of normal, such that a developer could easily
make a mistake and shift at the usage site (like when using
FIELD_PREP()).

Rename the defines and set them to the "pre-shifted values" so they
match the template the driver normally uses for masks and the member
bits of the mask, which also allows the driver to use FIELD_PREP
correctly with these values. Use GENMASK() for this changed MASK value.

Do the same for the VLAN EMODE defines as well.

Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: Fix coresight warnings in in-ports and out-ports

[ Upstream commit bdb6339fd46b8702ea7411b0b414587b86a40562 ]

When a node is only one in port or one out port, address-cells and
size-cells are not required in in-ports and out-ports. And the number
and reg of the port need to be removed.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20231210072633.4243-5-quic_jinlmao@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8998: Fix 'out-ports' is a required property

[ Upstream commit ae5ee3562a2519214b12228545e88a203dd68bbd ]

out-ports is a required property for coresight ETM. Add out-ports for
ETM nodes to fix the warning.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20231210072633.4243-4-quic_jinlmao@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8996: Fix 'in-ports' is a required property

[ Upstream commit 9a6fc510a6a3ec150cb7450aec1e5f257e6fc77b ]

Add the inport of funnel@3023000 to fix 'in-ports' is a required property
warning.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20231210072633.4243-3-quic_jinlmao@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: Whenassemble the array, consult the superblock of the freshest device

[ Upstream commit dc1cc22ed58f11d58d8553c5ec5f11cbfc3e3039 ]

Upon assembling the array, both kernel and mdadm allow the devices to have event
counter difference of 1, and still consider them as up-to-date.
However, a device whose event count is behind by 1, may in fact not be up-to-date,
and array resync with such a device may cause data corruption.
To avoid this, consult the superblock of the freshest device about the status
of a device, whose event counter is behind by 1.

Signed-off-by: Alex Lyakas <alex.lyakas@zadara.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/1702470271-16073-1-git-send-email-alex.lyakas@zadara.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: prevent an integer overflow in bvec_try_merge_hw_page

[ Upstream commit 3f034c374ad55773c12dd8f3c1607328e17c0072 ]

Reordered a check to avoid a possible overflow when adding len to bv_len.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20231204173419.782378-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mv88e6xxx: Fix mv88e6352_serdes_get_stats error path

[ Upstream commit fc82a08ae795ee6b73fb6b50785f7be248bec7b5 ]

mv88e6xxx_get_stats, which collects stats from various sources,
expects all callees to return the number of stats read. If an error
occurs, 0 should be returned.

Prevent future mishaps of this kind by updating the return type to
reflect this contract.

Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: atlantic: eliminate double free in error handling logic

[ Upstream commit b3cb7a830a24527877b0bc900b9bd74a96aea928 ]

Driver has a logic leak in ring data allocation/free,
where aq_ring_free could be called multiple times on same ring,
if system is under stress and got memory allocation error.

Ring pointer was used as an indicator of failure, but this is
not correct since only ring data is allocated/deallocated.
Ring itself is an array member.

Changing ring allocation functions to return error code directly.
This simplifies error handling and eliminates aq_ring_free
on higher layer.

Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20231213095044.23146-1-irusskikh@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: fix ICE_AQ_VSI_Q_OPT_RSS_* register values

[ Upstream commit 20f73b60bb5c276cee9b1a530f100c677bc74af8 ]

Fix the values of the ICE_AQ_VSI_Q_OPT_RSS_* registers. Shifting is
already done when the values are used, no need to double shift. Bug was
not discovered earlier since only ICE_AQ_VSI_Q_OPT_RSS_TPLZ (Zero) is
currently used.

Also, rename ICE_AQ_VSI_Q_OPT_RSS_XXX to ICE_AQ_VSI_Q_OPT_RSS_HASH_XXX
for consistency.

Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-5-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: hisi_sas: Set .phy_attached before notifing phyup event HISI_PHYE_PHY_UP_PM

[ Upstream commit ce26497c745d0541aec930d5211b431a1c26af97 ]

Currently in directly attached scenario, the phyup event
HISI_PHYE_PHY_UP_PM is notified before .phy_attached is set - this may
cause the phyup work hisi_sas_bytes_dmaed() execution failed and the
attached device will not be found.

To fix it, set .phy_attached before notifing phyup event.

Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1702525516-51258-2-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Move determination of vmid_flag after VMID reinitialization completes

[ Upstream commit aba0fb0ef607a71511d23a07406f11130c1a54c5 ]

If priority tagging is set in the service parameters of a FLOGI cmpl, then
we update the vmid_flag.  In the current logic, if a follow up FLOGI cmpl
updates its service parameters such that priority tagging is no longer set,
then the vmid_flag ends up keeping stale data.

Fix by ensuring we clear the vmid_flag member during lpfc_reinit_vmid, and
check the priority tagging service parameter after reinitialization of the
vmid data structures.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231207224039.35466-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Reinitialize an NPIV's VMID data structures after FDISC

[ Upstream commit 8dc8eb89f4df74593ba4bf30c3d31a0fc6d3ea47 ]

After a follow up FDISC cmpl, an NPIV's VMID data structures are not
updated.

Fix by calling lpfc_reinit_vmid and copying the physical port's vmid_flag
to the NPIV's vmid_flag in the NPIV registration cmpl code path.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231207224039.35466-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx23/28: Fix the DMA controller node name

[ Upstream commit 858d83ca4b50bbc8693d95cc94310e6d791fb2e6 ]

Per fsl,mxs-dma.yaml, the node name should be 'dma-controller'.

Change it to fix the following dt-schema warning.

imx28-apf28.dtb: dma-apbx@80024000: $nodename:0: 'dma-apbx@80024000' does not match '^dma-controller(@.*)?$'
from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx23-sansa: Use preferred i2c-gpios properties

[ Upstream commit e3aa1a82fb20ee97597022f6528823a8ab82bde6 ]

The 'gpios' property to describe the SDA and SCL GPIOs is considered
deprecated according to i2c-gpio.yaml.

Switch to the preferred 'sda-gpios' and 'scl-gpios' properties.

This fixes the following schema warnings:

imx23-sansa.dtb: i2c-0: 'sda-gpios' is a required property
from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
imx23-sansa.dtb: i2c-0: 'scl-gpios' is a required property
from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx27-apf27dev: Fix LED name

[ Upstream commit dc35e253d032b959d92e12f081db5b00db26ae64 ]

Per leds-gpio.yaml, the led names should start with 'led'.

Change it to fix the following dt-schema warning:

imx27-apf27dev.dtb: leds: 'user' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx25/27: Pass timing0

[ Upstream commit 11ab7ad6f795ae23c398a4a5c56505d3dab27c4c ]

Per display-timings.yaml, the 'timing' pattern should be used to
describe the display timings.

Change it accordingly to fix the following dt-schema warning:

imx27-apf27dev.dtb: display-timings: '800x480' does not match any of the regexes: '^timing', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/display/panel/display-timings.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx25: Fix the iim compatible string

[ Upstream commit f0b929f58719fc57a4926ab4fc972f185453d6a5 ]

Per imx-iim.yaml, the compatible string should only contain a single
entry.

Use it as "fsl,imx25-iim" to fix the following dt-schema warning:

imx25-karo-tx25.dtb: efuse@53ff0000: compatible: ['fsl,imx25-iim', 'fsl,imx27-iim'] is too long
from schema $id: http://devicetree.org/schemas/nvmem/imx-iim.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: fix compiler warnings in RELEASE=1 mode

[ Upstream commit 62d9a969f4a95219c757831e9ad66cd4dd9edee5 ]

When compiling BPF selftests with RELEASE=1, we get two new
warnings, which are treated as errors. Fix them.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20231212225343.1723081-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: zynqmp: Fix clock node name in kv260 cards

[ Upstream commit 0bfb7950cc1975372c4c58c3d3f9803f05245d46 ]

node name shouldn't use '_' that's why convert it to '-'.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: zynqmp: Move fixed clock to / for kv260

[ Upstream commit 6a10a19a6bd2fd8d27a510678bf87bd9408f51d8 ]

fixed clock nodes can't be on the bus because they are missing reg
property. That's why move them to root.
And because it is root it is good to have it as the first node in a file.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block/rnbd-srv: Check for unlikely string overflow

[ Upstream commit 9e4bf6a08d1e127bcc4bd72557f2dfafc6bc7f41 ]

Since "dev_search_path" can technically be as large as PATH_MAX,
there was a risk of truncation when copying it and a second string
into "full_path" since it was also PATH_MAX sized. The W=1 builds were
reporting this warning:

drivers/block/rnbd/rnbd-srv.c: In function 'process_msg_open.isra':
drivers/block/rnbd/rnbd-srv.c:616:51: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size between 0 and 4095 [-Wformat-truncation=]
  616 |                 snprintf(full_path, PATH_MAX, "%s/%s",
      |                                                   ^~
In function 'rnbd_srv_get_full_path',
    inlined from 'process_msg_open.isra' at drivers/block/rnbd/rnbd-srv.c:721:14: drivers/block/rnbd/rnbd-srv.c:616:17: note: 'snprintf' output between 2 and 4351 bytes into a destination of size 4096
  616 |                 snprintf(full_path, PATH_MAX, "%s/%s",
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  617 |                          dev_search_path, dev_name);
      |                          ~~~~~~~~~~~~~~~~~~~~~~~~~~

To fix this, unconditionally check for truncation (as was already done
for the case where "%SESSNAME%" was present).

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312100355.lHoJPgKy-lkp@intel.com/
Cc: Md. Haris Iqbal <haris.iqbal@ionos.com>
Cc: Jack Wang <jinpu.wang@ionos.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <linux-block@vger.kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20231212214738.work.169-kees@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: bypass firmware cmds when stuck in reset

[ Upstream commit ca5fdf9a7c5b65968c718f2be159cda4c13556a1 ]

If the driver or firmware is stuck in reset state, don't bother
trying to use adminq commands.  This speeds up shutdown and
prevents unnecessary timeouts and error messages.

This includes a bit of rework on ionic_adminq_post_wait()
and ionic_adminq_post_wait_nomsg() to both use
__ionic_adminq_post_wait() which can do the checks needed in
both cases.

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: pass opcode to devcmd_wait

[ Upstream commit 24f110240c03c6b5368f1203bac72883d511e606 ]

Don't rely on the PCI memory for the devcmd opcode because we
read a 0xff value if the PCI bus is broken, which can cause us
to report a bogus dev_cmd opcode later.

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: at803x: fix passing the wrong reference for config_intr

[ Upstream commit f8fdbf3389f44c7026f16e36cb1f2ff017f7f5b2 ]

Fix passing the wrong reference for config_initr on passing the function
pointer, drop the wrong & from at803x_config_intr in the PHY struct.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx1: Fix sram node

[ Upstream commit c248e535973088ba7071ff6f26ab7951143450af ]

Per sram.yaml, address-cells, size-cells and ranges are mandatory.

The node name should be sram.

Change the node name and pass the required properties to fix the
following dt-schema warnings:

imx1-apf9328.dtb: esram@300000: $nodename:0: 'esram@300000' does not match '^sram(@.*)?'
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
imx1-apf9328.dtb: esram@300000: '#address-cells' is a required property
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
imx1-apf9328.dtb: esram@300000: '#size-cells' is a required property
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
imx1-apf9328.dtb: esram@300000: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx27: Fix sram node

[ Upstream commit 2fb7b2a2f06bb3f8321cf26c33e4e820c5b238b6 ]

Per sram.yaml, address-cells, size-cells and ranges are mandatory.

Pass them to fix the following dt-schema warnings:

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx: Use flash@0,0 pattern

[ Upstream commit 1e1d7cc478fb16816de09740e3c323c0c188d58f ]

Per mtd-physmap.yaml, 'nor@0,0' is not a valid node pattern.

Change it to 'flash@0,0' to fix the following dt-schema warning:

imx1-ads.dtb: nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$'
from schema $id: http://devicetree.org/schemas/mtd/mtd-physmap.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx25/27-eukrea: Fix RTC node name

[ Upstream commit 68c711b882c262e36895547cddea2c2d56ce611d ]

Node names should be generic. Use 'rtc' as node name to fix
the following dt-schema warning:

imx25-eukrea-mbimxsd25-baseboard.dtb: pcf8563@51: $nodename:0: 'pcf8563@51' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$'
from schema $id: http://devicetree.org/schemas/rtc/nxp,pcf8563.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: rockchip: fix rk3036 hdmi ports node

[ Upstream commit 27ded76ef0fcfcf939914532aae575cf23c221b4 ]

Fix hdmi ports node so that it matches the
rockchip,inno-hdmi.yaml binding.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/9a2afac1-ed5c-382d-02b0-b2f5f1af3abb@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath12k: fix the issue that the multicast/broadcast indicator is not read correctly for WCN7850

[ Upstream commit 7133b072dfbfac8763ffb017642c9c894894c50d ]

We observe some packets are discarded in ieee80211_rx_handlers_result
function for WCN7850. This is because the way to get multicast/broadcast
indicator with RX_MSDU_END_INFO5_DA_IS_MCBC & info5 is incorrect. It should
use RX_MSDU_END_INFO13_MCAST_BCAST & info13 to get multicast/broadcast
indicator.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231206141759.5430-1-quic_lingbok@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: wfx: fix possible NULL pointer dereference in wfx_set_mfp_ap()

[ Upstream commit fe0a7776d4d19e613bb8dd80fe2d78ae49e8b49d ]

Since 'ieee80211_beacon_get()' can return NULL, 'wfx_set_mfp_ap()'
should check the return value before examining skb data. So convert
the latter to return an appropriate error code and propagate it to
return from 'wfx_start_ap()' as well. Compile tested only.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Tested-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231204171130.141394-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Set uattr->batch.count as zero before batched update or deletion

[ Upstream commit 06e5c999f10269a532304e89a6adb2fbfeb0593c ]

generic_map_{delete,update}_batch() doesn't set uattr->batch.count as
zero before it tries to allocate memory for key. If the memory
allocation fails, the value of uattr->batch.count will be incorrect.

Fix it by setting uattr->batch.count as zero beore batched update or
deletion.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231208102355.2628918-6-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: mt7996: add PCI IDs for mt7992

[ Upstream commit 3d3f117a259a65353bf2714a18e25731b3ca5770 ]

Add PCI device IDs to enable mt7992 chipsets support.

Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: connac: fix EHT phy mode check

[ Upstream commit 2c2f50bf6407e1fd43a1a257916aeaa5ffdacd6c ]

Add a BSS eht_support check before returning EHT phy mode. Without this
patch, there might be an inconsistency where the softmac layer thinks
the BSS is in HE mode, while the FW thinks it is in EHT mode.

Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8350: Fix remoteproc interrupt type

[ Upstream commit 54ee322f845c7f25fbf6e43e11147b6cae8eff56 ]

In a similar vein to
https://lore.kernel.org/lkml/20220530080842.37024-3-manivannan.sadhasivam@linaro.org/,
the remote processors on sm8350 fail to initialize with the 'correct'
(i.e., specified in downstream) IRQ type. Change this to EDGE_RISING.

Signed-off-by: Nia Espera <nespera@igalia.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111-nia-sm8350-for-upstream-v4-4-3a638b02eea5@igalia.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8450: fix soundwire controllers node name

[ Upstream commit 11fcb81373de52eeb1d3ff135a8d24a4b18978d3 ]

Fix the following dt bindings check:
arch/arm64/boot/dts/qcom/sm8450-hdk.dtb: soundwire-controller@31f0000: $nodename:0: 'soundwire-controller@31f0000' does not match '^soundwire(@.*)?$'
        from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8450-upstream-soundwire-bindings-fix-v1-1-41d4844a5a7d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8550: fix soundwire controllers node name

[ Upstream commit 07c88da81caf0e72c3690b689d30f0d325cfeff4 ]

Fix the following dt bindings check:
arch/arm64/boot/dts/qcom/sm8550-mtp.dtb: soundwire-controller@6ab0000: $nodename:0: 'soundwire-controller@6ab0000' does not match '^soundwire(@.*)?$'
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8550-upstream-soundwire-bindings-fix-v1-1-4ded91c805a1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mvmdio: Avoid excessive sleeps in polled mode

[ Upstream commit 7dd12fe34686d89c332b1a05104d18d728591f0a ]

Before this change, when operating in polled mode, i.e. no IRQ is
available, every individual C45 access would be hit with a 150us sleep
after the bus access.

For example, on a board with a CN9130 SoC connected to an MV88X3310
PHY, a single C45 read would take around 165us:

    root@infix:~$ mdio f212a600.mdio-mii mmd 4:1 bench 0xc003
    Performed 1000 reads in 165ms

By replacing the long sleep with a tighter poll loop, we observe a 10x
increase in bus throughput:

    root@infix:~$ mdio f212a600.mdio-mii mmd 4:1 bench 0xc003
    Performed 1000 reads in 15ms

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20231204100811.2708884-3-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

minmax: relax check to allow comparison between unsigned arguments and signed constants

commit 867046cc7027703f60a46339ffde91a1970f2901 upstream.

Allow (for example) min(unsigned_var, 20).

The opposite min(signed_var, 20u) is still errored.

Since a comparison between signed and unsigned never makes the unsigned
value negative it is only necessary to adjust the __types_ok() test.

Link: https://lkml.kernel.org/r/633b64e2f39e46bb8234809c5595b8c7@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

minmax: allow comparisons of 'int' against 'unsigned char/short'

commit 4ead534fba42fc4fd41163297528d2aa731cd121 upstream.

Since 'unsigned char/short' get promoted to 'signed int' it is safe to
compare them against an 'int' value.

Link: https://lkml.kernel.org/r/8732ef5f809c47c28a7be47c938b28d4@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

minmax: fix indentation of __cmp_once() and __clamp_once()

commit f4b84b2ff851f01d0fac619eadef47eb41648534 upstream.

Remove the extra indentation and align continuation markers.

Link: https://lkml.kernel.org/r/bed41317a05c498ea0209eafbcab45a5@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

minmax: allow min()/max()/clamp() if the arguments have the same signedness.

commit d03eba99f5bf7cbc6e2fdde3b6fa36954ad58e09 upstream.

The type-check in min()/max() is there to stop unexpected results if a
negative value gets converted to a large unsigned value.  However it also
rejects 'unsigned int' v 'unsigned long' compares which are common and
never problematc.

Replace the 'same type' check with a 'same signedness' check.

The new test isn't itself a compile time error, so use static_assert() to
report the error and give a meaningful error message.

Due to the way builtin_choose_expr() works detecting the error in the
'non-constant' side (where static_assert() can be used) also detects
errors when the arguments are constant.

Link: https://lkml.kernel.org/r/fe7e6c542e094bfca655abcd323c1c98@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

minmax: add umin(a, b) and umax(a, b)

commit 80fcac55385ccb710d33a20dc1caaef29bd5a921 upstream.

Patch series "minmax: Relax type checks in min() and max()", v4.

The min() (etc) functions in minmax.h require that the arguments have
exactly the same types.

However when the type check fails, rather than look at the types and fix
the type of a variable/constant, everyone seems to jump on min_t().  In
reality min_t() ought to be rare - when something unusual is being done,
not normality.

The orginal min() (added in 2.4.9) replaced several inline functions and
included the type - so matched the implicit casting of the function call.
This was renamed min_t() in 2.4.10 and the current min() added.  There is
no actual indication that the conversion of negatve values to large
unsigned values has ever been an actual problem.

A quick grep shows 5734 min() and 4597 min_t().  Having the casts on
almost half of the calls shows that something is clearly wrong.

If the wrong type is picked (and it is far too easy to pick the type of
the result instead of the larger input) then significant bits can get
discarded.

Pretty much the worst example is in the derived clamp_val(), consider:
        unsigned char x = 200u;
        y = clamp_val(x, 10u, 300u);

I also suspect that many of the min_t(u16, ...) are actually wrong.  For
example copy_data() in printk_ringbuffer.c contains:

        data_size = min_t(u16, buf_size, len);

Here buf_size is 'unsigned int' and len 'u16', pass a 64k buffer (can you
prove that doesn't happen?) and no data is returned.  Apparantly it did -
and has since been fixed.

The only reason that most of the min_t() are 'fine' is that pretty much
all the values in the kernel are between 0 and INT_MAX.

Patch 1 adds umin(), this uses integer promotions to convert both
arguments to 'unsigned long long'.  It can be used to compare a signed
type that is known to contain a non-negative value with an unsigned type.
The compiler typically optimises it all away.  Added first so that it can
be referred to in patch 2.

Patch 2 replaces the 'same type' check with a 'same signedness' one.  This
makes min(unsigned_int_var, sizeof()) be ok.  The error message is also
improved and will contain the expanded form of both arguments (useful for
seeing how constants are defined).

Patch 3 just fixes some whitespace.

Patch 4 allows comparisons of 'unsigned char' and 'unsigned short' to
signed types.  The integer promotion rules convert them both to 'signed
int' prior to the comparison so they can never cause a negative value be
converted to a large positive one.

Patch 5 (rewritted for v4) allows comparisons of unsigned values against
non-negative constant integer expressions.  This makes
min(unsigned_int_var, 4) be ok.

The only common case that is still errored is the comparison of signed
values against unsigned constant integer expressions below __INT_MAX__.
Typcally min(int_val, sizeof (foo)), the real fix for this is casting the
constant: min(int_var, (int)sizeof (foo)).

With all the patches applied pretty much all the min_t() could be replaced
by min(), and most of the rest by umin().  However they all need careful
inspection due to code like:

        sz = min_t(unsigned char, sz - 1, LIM - 1) + 1;

which converts 0 to LIM.

This patch (of 6):

umin() and umax() can be used when min()/max() errors a signed v unsigned
compare when the signed value is known to be non-negative.

Unlike min_t(some_unsigned_type, a, b) umin() will never mask off high
bits if an inappropriate type is selected.

The '+ 0u + 0ul + 0ull' may look strange.
The '+ 0u' is needed for 'signed int' on 64bit systems.
The '+ 0ul' is needed for 'signed long' on 32bit systems.
The '+ 0ull' is needed for 'signed long long'.

Link: https://lkml.kernel.org/r/b97faef60ad24922b530241c5d7c933c@AcuMS.aculab.com
Link: https://lkml.kernel.org/r/41d93ca827a248698ec64bf57e0c05a5@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

minmax: fix header inclusions

commit f6e9d38f8eb00ac8b52e6d15f6aa9bcecacb081b upstream.

BUILD_BUG_ON*() macros are defined in build_bug.h.  Include it.  Replace
compiler_types.h by compiler.h, which provides the former, to have a
definition of the __UNIQUE_ID().

Link: https://lkml.kernel.org/r/20230912092355.79280-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

minmax: deduplicate __unconst_integer_typeof()

commit 5e57418a2031cd5e1863efdf3d7447a16a368172 upstream.

It appears that compiler_types.h already have an implementation of the
__unconst_integer_typeof() called __unqual_scalar_typeof().  Use it
instead of the copy.

Link: https://lkml.kernel.org/r/20230911154913.4176033-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libfc: Fix up timeout error in fc_fcp_rec_error()

[ Upstream commit 53122a49f49796beb2c4a1bb702303b66347e29f ]

We should set the status to FC_TIMED_OUT when a timeout error is passed to
fc_fcp_rec_error().

Signed-off-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20231129165832.224100-3-hare@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: libfc: Don't schedule abort twice

[ Upstream commit b57c4db5d23b9df0118a25e2441c9288edd73710 ]

The current FC error recovery is sending up to three REC (recovery) frames
in 10 second intervals, and as a final step sending an ABTS after 30
seconds for the command itself.  Unfortunately sending an ABTS is also the
action for the SCSI abort handler, and the default timeout for SCSI
commands is also 30 seconds. This causes two ABTS to be scheduled, with the
libfc one slightly earlier. The ABTS scheduled by SCSI EH then sees the
command to be already aborted, and will always return with a 'GOOD' status
irrespective on the actual result from the first ABTS.  This causes the
SCSI EH abort handler to always succeed, and SCSI EH never to be engaged.
Fix this by not issuing an ABTS when a SCSI command is present for the
exchange, but rather wait for the abort scheduled from SCSI EH.  And warn
if an abort is already scheduled to avoid similar errors in the future.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20231129165832.224100-2-hare@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath12k: fix and enable AP mode for WCN7850

[ Upstream commit ed7e818a7b501012038d6bc6fedadaf7375a380a ]

For AP mode, the peer is created earlier in ath12k_mac_op_add_interface() but
ath12k_mac_op_assign_vif_chanctx() will try to create peer again.  Then an
error will return which makes AP mode startup fail.

Kernel log:

[ 5017.665006] ath12k_pci 0000:04:00.0: failed to create peer after vdev start delay: -22

wpa_supplicant log:

Failed to set beacon parameters
Interface initialization failed
wls1: interface state UNINITIALIZED->DISABLED
wls1: AP-DISABLED
wls1: Unable to setup interface.
Failed to initialize AP interface
wls1: interface state DISABLED->DISABLED
wls1: AP-DISABLED

So fix this check and enable AP mode for WCN7850, as now AP mode works normally.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231121022459.17209-1-quic_kangyang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Set need_defer as false when clearing fd array during map free

[ Upstream commit 79d93b3c6ffd79abcd8e43345980aa1e904879c4 ]

Both map deletion operation, map release and map free operation use
fd_array_map_delete_elem() to remove the element from fd array and
need_defer is always true in fd_array_map_delete_elem(). For the map
deletion operation and map release operation, need_defer=true is
necessary, because the bpf program, which accesses the element in fd
array, may still alive. However for map free operation, it is certain
that the bpf program which owns the fd array has already been exited, so
setting need_defer as false is appropriate for map free operation.

So fix it by adding need_defer parameter to bpf_fd_array_map_clear() and
adding a new helper __fd_array_map_delete_elem() to handle the map
deletion, map release and map free operations correspondingly.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231204140425.1480317-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Check rcu_read_lock_trace_held() before calling bpf map helpers

[ Upstream commit 169410eba271afc9f0fb476d996795aa26770c6d ]

These three bpf_map_{lookup,update,delete}_elem() helpers are also
available for sleepable bpf program, so add the corresponding lock
assertion for sleepable bpf program, otherwise the following warning
will be reported when a sleepable bpf program manipulates bpf map under
interpreter mode (aka bpf_jit_enable=0):

  WARNING: CPU: 3 PID: 4985 at kernel/bpf/helpers.c:40 ......
  CPU: 3 PID: 4985 Comm: test_progs Not tainted 6.6.0+ #2
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
  RIP: 0010:bpf_map_lookup_elem+0x54/0x60
  ......
  Call Trace:
   <TASK>
   ? __warn+0xa5/0x240
   ? bpf_map_lookup_elem+0x54/0x60
   ? report_bug+0x1ba/0x1f0
   ? handle_bug+0x40/0x80
   ? exc_invalid_op+0x18/0x50
   ? asm_exc_invalid_op+0x1b/0x20
   ? __pfx_bpf_map_lookup_elem+0x10/0x10
   ? rcu_lockdep_current_cpu_online+0x65/0xb0
   ? rcu_is_watching+0x23/0x50
   ? bpf_map_lookup_elem+0x54/0x60
   ? __pfx_bpf_map_lookup_elem+0x10/0x10
   ___bpf_prog_run+0x513/0x3b70
   __bpf_prog_run32+0x9d/0xd0
   ? __bpf_prog_enter_sleepable_recur+0xad/0x120
   ? __bpf_prog_enter_sleepable_recur+0x3e/0x120
   bpf_trampoline_6442580665+0x4d/0x1000
   __x64_sys_getpgid+0x5/0x30
   ? do_syscall_64+0x36/0xb0
   entry_SYSCALL_64_after_hwframe+0x6e/0x76
   </TASK>

Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231204140425.1480317-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtw89: fix misbehavior of TX beacon in concurrent mode

[ Upstream commit 756b31203d482d2dd1aa6c208978b0410dc7530f ]

In concurrent mode, when STA interface is scanning, it causes
AP interface TX beacon on wrong channel. We modified it to scan
with the operating channel when one of the interfaces is already
connected. Additionally, STA interface need to stop scan when AP
interface is starting to avoid TX beacon on wrong channel. Finally,
AP interface need to stop TX beacon when STA interface is scanning
and switching to non-OP channel,This prevent other device to get
beacons on wrong channel.

Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231129070046.18443-5-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath11k: fix race due to setting ATH11K_FLAG_EXT_IRQ_ENABLED too early

[ Upstream commit 5082b3e3027eae393a4e86874bffb4ce3f83c26e ]

We are seeing below error randomly in the case where only
one MSI vector is configured:

kernel: ath11k_pci 0000:03:00.0: wmi command 16387 timeout

The reason is, currently, in ath11k_pcic_ext_irq_enable(),
ATH11K_FLAG_EXT_IRQ_ENABLED is set before NAPI is enabled.
This results in a race condition: after
ATH11K_FLAG_EXT_IRQ_ENABLED is set but before NAPI enabled,
CE interrupt breaks in. Since IRQ is shared by CE and data
path, ath11k_pcic_ext_interrupt_handler() is also called
where we call disable_irq_nosync() to disable IRQ. Then
napi_schedule() is called but it does nothing because NAPI
is not enabled at that time, meaning
ath11k_pcic_ext_grp_napi_poll() will never run, so we have
no chance to call enable_irq() to enable IRQ back. Finally
we get above error.

Fix it by setting ATH11K_FLAG_EXT_IRQ_ENABLED after all
NAPI and IRQ work are done. With the fix, we are sure that
by the time ATH11K_FLAG_EXT_IRQ_ENABLED is set, NAPI is
enabled.

Note that the fix above also introduce some side effects:
if ath11k_pcic_ext_interrupt_handler() breaks in after NAPI
enabled but before ATH11K_FLAG_EXT_IRQ_ENABLED set, nothing
will be done by the handler this time, the work will be
postponed till the next time the IRQ fires.

Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231117003919.26218-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath9k: Fix potential array-index-out-of-bounds read in ath9k_htc_txstatus()

[ Upstream commit 2adc886244dff60f948497b59affb6c6ebb3c348 ]

Fix an array-index-out-of-bounds read in ath9k_htc_txstatus(). The bug
occurs when txs->cnt, data from a URB provided by a USB device, is
bigger than the size of the array txs->txstatus, which is
HTC_MAX_TX_STATUS. WARN_ON() already checks it, but there is no bug
handling code after the check. Make the function return if that is the
case.

Found by a modified version of syzkaller.

UBSAN: array-index-out-of-bounds in htc_drv_txrx.c
index 13 is out of range for type '__wmi_event_txstatus [12]'
Call Trace:
 ath9k_htc_txstatus
 ath9k_wmi_event_tasklet
 tasklet_action_common
 __do_softirq
 irq_exit_rxu
 sysvec_apic_timer_interrupt

Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231113065756.1491991-1-linuxlovemin@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix a few selftest failures due to llvm18 change

[ Upstream commit b16904fd9f01b580db357ef2b1cc9e86d89576c2 ]

With latest upstream llvm18, the following test cases failed:

  $ ./test_progs -j
  #13/2    bpf_cookie/multi_kprobe_link_api:FAIL
  #13/3    bpf_cookie/multi_kprobe_attach_api:FAIL
  #13      bpf_cookie:FAIL
  #77      fentry_fexit:FAIL
  #78/1    fentry_test/fentry:FAIL
  #78      fentry_test:FAIL
  #82/1    fexit_test/fexit:FAIL
  #82      fexit_test:FAIL
  #112/1   kprobe_multi_test/skel_api:FAIL
  #112/2   kprobe_multi_test/link_api_addrs:FAIL
  [...]
  #112     kprobe_multi_test:FAIL
  #356/17  test_global_funcs/global_func17:FAIL
  #356     test_global_funcs:FAIL

Further analysis shows llvm upstream patch [1] is responsible for the above
failures. For example, for function bpf_fentry_test7() in net/bpf/test_run.c,
without [1], the asm code is:

  0000000000000400 <bpf_fentry_test7>:
     400: f3 0f 1e fa                   endbr64
     404: e8 00 00 00 00                callq   0x409 <bpf_fentry_test7+0x9>
     409: 48 89 f8                      movq    %rdi, %rax
     40c: c3                            retq
     40d: 0f 1f 00                      nopl    (%rax)

... and with [1], the asm code is:

  0000000000005d20 <bpf_fentry_test7.specialized.1>:
    5d20: e8 00 00 00 00                callq   0x5d25 <bpf_fentry_test7.specialized.1+0x5>
    5d25: c3                            retq

... and <bpf_fentry_test7.specialized.1> is called instead of <bpf_fentry_test7>
and this caused test failures for #13/#77 etc. except #356.

For test case #356/17, with [1] (progs/test_global_func17.c)), the main prog
looks like:

  0000000000000000 <global_func17>:
       0:       b4 00 00 00 2a 00 00 00 w0 = 0x2a
       1:       95 00 00 00 00 00 00 00 exit

... which passed verification while the test itself expects a verification
failure.

Let us add 'barrier_var' style asm code in both places to prevent function
specialization which caused selftests failure.

  [1] https://github.com/llvm/llvm-project/pull/72903

Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231127050342.1945270-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx7s: Fix nand-controller #size-cells

[ Upstream commit 4aadb841ed49bada1415c48c44d21f5b69e01299 ]

nand-controller.yaml bindings says #size-cells shall be set to 0.
Fixes the dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx7s-mba7.dtb: nand-controller@33002000:
 #size-cells:0:0: 0 was expected
  from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx7s: Fix lcdif compatible

[ Upstream commit 5f55da4cc37051cda600ea870ce8cf29f1297715 ]

imx7d-lcdif is compatible to imx6sx-lcdif. MXSFB_V6 supports overlay
by using LCDC_AS_CTRL register. This registers used by overlay plane:
* LCDC_AS_CTRL
* LCDC_AS_BUF
* LCDC_AS_NEXT_BUF
are listed in i.MX7D RM as well.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx7d: Fix coresight funnel ports

[ Upstream commit 0d4ac04fa7c3f6dc263dba6f575a2ec7a2d4eca8 ]

imx7d uses two ports for 'in-ports', so the syntax port@<num> has to
be used. imx7d has both port and port@1 nodes present, raising these
error:
funnel@30041000: in-ports: More than one condition true in oneOf schema
funnel@30041000: Unevaluated properties are not allowed
('in-ports' was unexpected)

Fix this by also using port@0 for imx7s as well.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: arcmsr: Support new PCI device IDs 1883 and 1886

[ Upstream commit 41c8a1a1e90fa4721f856bf3cf71211fd16d6434 ]

Add support for Areca RAID controllers with PCI device IDs 1883 and 1886.

Signed-off-by: ching Huang <ching2048@areca.com.tw>
Link: https://lore.kernel.org/r/7732e743eaad57681b1552eec9c6a86c76dbe459.camel@areca.com.tw
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpi3mr: Add PCI checks where SAS5116 diverges from SAS4116

[ Upstream commit c9260ff28ee561fca5f96425c9328a9698e8427b ]

Add PCI IDs checks for the cases where SAS5116 diverges from SAS4116 in
behavior.

Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20231123160132.4155-3-sumit.saxena@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpi3mr: Add support for SAS5116 PCI IDs

[ Upstream commit 6fa21eab82be57a3ad2470fac27b982793805336 ]

Add support for Broadcom's SAS5116 IO/RAID controllers PCI IDs.

Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20231123160132.4155-2-sumit.saxena@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: usb: ax88179_178a: avoid two consecutive device resets

[ Upstream commit d2689b6a86b9d23574bd4b654bf770b6034e2c7e ]

The device is always reset two consecutive times (ax88179_reset is called
twice), one from usbnet_probe during the device binding and the other from
usbnet_open.

Remove the non-necessary reset during the device binding and let the reset
operation from open to keep the normal behavior (tested with generic ASIX
Electronics Corp. AX88179 Gigabit Ethernet device).

Reported-by: Herb Wei <weihao.bj@ieisystem.com>
Tested-by: Herb Wei <weihao.bj@ieisystem.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://lore.kernel.org/r/20231120121239.54504-1-jtornosm@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: return -ENOMEM instead of BUG in alb_upper_dev_walk

[ Upstream commit d6b83f1e3707c4d60acfa58afd3515e17e5d5384 ]

If failed to allocate "tags" or could not find the final upper device from
start_dev's upper list in bond_verify_device_path(), only the loopback
detection of the current upper device should be affected, and the system is
no need to be panic.
So return -ENOMEM in alb_upper_dev_walk to stop walking, print some warn
information when failed to allocate memory for vlan tags in
bond_verify_device_path.

I also think that the following function calls
netdev_walk_all_upper_dev_rcu
---->>>alb_upper_dev_walk
---------->>>bond_verify_device_path
From this way, "end device" can eventually be obtained from "start device"
in bond_verify_device_path, IS_ERR(tags) could be instead of
IS_ERR_OR_NULL(tags) in alb_upper_dev_walk.

Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20231118081653.1481260-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Add no PM reset quirk for NVIDIA Spectrum devices

[ Upstream commit 3ed48c80b28d8dcd584d6ddaf00c75b7673e1a05 ]

Spectrum-{1,2,3,4} devices report that a D3hot->D0 transition causes a
reset (i.e., they advertise NoSoftRst-). However, this transition does
not have any effect on the device: It continues to be operational and
network ports remain up. Advertising this support makes it seem as if a
PM reset is viable for these devices. Mark it as unavailable to skip it
when testing reset methods.

Before:

 # cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method
 pm bus

After:

 # cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method
 bus

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: micrel: fix ts_info value in case of no phc

[ Upstream commit 915d25a9d69be969c1cc6c1dd0c3861f6da7b55e ]

In case of no phc we should not return SOFTWARE TIMESTAMPING flags as we do
not know whether the netdev supports of timestamping.
Remove it from the lan8841_ts_info and simply return 0.

Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: samsung: s5pv210: fix camera unit addresses/ranges

[ Upstream commit 07e6a553c2f1d385edfc9185081dee442a9dd38d ]

The camera node has both unit address and children within the same bus
mapping, thus needs proper ranges property to fix dtc W=1 warnings:

  Warning (unit_address_vs_reg): /soc/camera@fa600000: node has a unit name, but no reg or ranges property
  Warning (simple_bus_reg): /soc/camera@fa600000: missing or empty reg/ranges property

Subtract 0xfa600000 from all its children nodes.  No functional impact
expected.

Link: https://lore.kernel.org/r/20230722121719.150094-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: samsung: exynos4: fix camera unit addresses/ranges

[ Upstream commit ba2a45a48503665f7e8eeec51f8b40456566b0cd ]

The camera node has both unit address and children within the same bus
mapping, thus needs proper ranges property to fix dtc W=1 warnings:

  Warning (unit_address_vs_reg): /soc/camera@11800000: node has a unit name, but no reg or ranges property
  Warning (simple_bus_reg): /soc/camera@11800000: missing or empty reg/ranges property

Subtract 0x11800000 from all its children nodes.  No functional impact
expected.

Link: https://lore.kernel.org/r/20230722121719.150094-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix possible file string name overflow when updating firmware

[ Upstream commit f5779b529240b715f0e358489ad0ed933bf77c97 ]

Because file_name and phba->ModelName are both declared a size 80 bytes,
the extra ".grp" file extension could cause an overflow into file_name.

Define a ELX_FW_NAME_SIZE macro with value 84.  84 incorporates the 4 extra
characters from ".grp".  file_name is changed to be declared as a char and
initialized to zeros i.e. null chars.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231031191224.150862-3-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>