review.tizen.org Git - platform/kernel/linux-rpi.git/log

btrfs: send: avoid unaligned encoded writes when attempting to clone range

[ Upstream commit a11452a3709e217492798cf3686ac2cc8eb3fb51 ]

When trying to see if we can clone a file range, there are cases where we
end up sending two write operations in case the inode from the source root
has an i_size that is not sector size aligned and the length from the
current offset to its i_size is less than the remaining length we are
trying to clone.

Issuing two write operations when we could instead issue a single write
operation is not incorrect. However it is not optimal, specially if the
extents are compressed and the flag BTRFS_SEND_FLAG_COMPRESSED was passed
to the send ioctl. In that case we can end up sending an encoded write
with an offset that is not sector size aligned, which makes the receiver
fallback to decompressing the data and writing it using regular buffered
IO (so re-compressing the data in case the fs is mounted with compression
enabled), because encoded writes fail with -EINVAL when an offset is not
sector size aligned.

The following example, which triggered a bug in the receiver code for the
fallback logic of decompressing + regular buffer IO and is fixed by the
patchset referred in a Link at the bottom of this changelog, is an example
where we have the non-optimal behaviour due to an unaligned encoded write:

   $ cat test.sh
   #!/bin/bash

   DEV=/dev/sdj
   MNT=/mnt/sdj

   mkfs.btrfs -f $DEV > /dev/null
   mount -o compress $DEV $MNT

   # File foo has a size of 33K, not aligned to the sector size.
   xfs_io -f -c "pwrite -S 0xab 0 33K" $MNT/foo

   xfs_io -f -c "pwrite -S 0xcd 0 64K" $MNT/bar

   # Now clone the first 32K of file bar into foo at offset 0.
   xfs_io -c "reflink $MNT/bar 0 0 32K" $MNT/foo

   # Snapshot the default subvolume and create a full send stream (v2).
   btrfs subvolume snapshot -r $MNT $MNT/snap

   btrfs send --compressed-data -f /tmp/test.send $MNT/snap

   echo -e "\nFile bar in the original filesystem:"
   od -A d -t x1 $MNT/snap/bar

   umount $MNT
   mkfs.btrfs -f $DEV > /dev/null
   mount $DEV $MNT

   echo -e "\nReceiving stream in a new filesystem..."
   btrfs receive -f /tmp/test.send $MNT

   echo -e "\nFile bar in the new filesystem:"
   od -A d -t x1 $MNT/snap/bar

   umount $MNT

Before this patch, the send stream included one regular write and one
encoded write for file 'bar', with the later being not sector size aligned
and causing the receiver to fallback to decompression + buffered writes.
The output of the btrfs receive command in verbose mode (-vvv):

   (...)
   mkfile o258-7-0
   rename o258-7-0 -> bar
   utimes
   clone bar - source=foo source offset=0 offset=0 length=32768
   write bar - offset=32768 length=1024
   encoded_write bar - offset=33792, len=4096, unencoded_offset=33792, unencoded_file_len=31744, unencoded_len=65536, compression=1, encryption=0
   encoded_write bar - falling back to decompress and write due to errno 22 ("Invalid argument")
   (...)

This patch avoids the regular write followed by an unaligned encoded write
so that we end up sending a single encoded write that is aligned. So after
this patch the stream content is (output of btrfs receive -vvv):

   (...)
   mkfile o258-7-0
   rename o258-7-0 -> bar
   utimes
   clone bar - source=foo source offset=0 offset=0 length=32768
   encoded_write bar - offset=32768, len=4096, unencoded_offset=32768, unencoded_file_len=32768, unencoded_len=65536, compression=1, encryption=0
   (...)

So we get more optimal behaviour and avoid the silent data loss bug in
versions of btrfs-progs affected by the bug referred by the Link tag
below (btrfs-progs v5.19, v5.19.1, v6.0 and v6.0.1).

Link: https://lore.kernel.org/linux-btrfs/cover.1668529099.git.fdmanana@suse.com/
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/net: Find nettest in current directory

[ Upstream commit bd5e1e42826f18147afb0ba07e6a815f52cf8bcb ]

The `nettest` binary, built from `selftests/net/nettest.c`,
was expected to be found in the path during test execution of
`fcnal-test.sh` and `pmtu.sh`, leading to tests getting
skipped when the binary is not installed in the system, as can
be seen in these logs found in the wild [1]:

  # TEST: vti4: PMTU exceptions                                         [SKIP]
  [  350.600250] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready
  [  350.607421] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready
  # 'nettest' command not found; skipping tests
  #   xfrm6udp not supported
  # TEST: vti6: PMTU exceptions (ESP-in-UDP)                            [SKIP]
  [  351.605102] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready
  [  351.612243] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready
  # 'nettest' command not found; skipping tests
  #   xfrm4udp not supported

The `unicast_extensions.sh` tests also rely on `nettest`, but
it runs fine there because it looks for the binary in the
current working directory [2]:

The same mechanism that works for the Unicast extensions tests
is here copied over to the PMTU and functional tests.

[1] https://lkft.validation.linaro.org/scheduler/job/5839508#L6221
[2] https://lkft.validation.linaro.org/scheduler/job/5839508#L7958

Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: seq: Fix function prototype mismatch in snd_seq_expand_var_event

[ Upstream commit 05530ef7cf7c7d700f6753f058999b1b5099a026 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed.

seq_copy_in_user() and seq_copy_in_kernel() did not have prototypes
matching snd_seq_dump_func_t. Adjust this and remove the casts. There
are not resulting binary output differences.

This was found as a result of Clang's new -Wcast-function-type-strict
flag, which is more sensitive than the simpler -Wcast-function-type,
which only checks for type width mismatches.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202211041527.HD8TLSE1-lkp@intel.com
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221118232346.never.380-kees@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: slg51000: Wait after asserting CS pin

[ Upstream commit 0b24dfa587c6cc7484cfb170da5c7dd73451f670 ]

Sony's downstream driver [1], among some other changes, adds a
seemingly random 10ms usleep_range, which turned out to be necessary
for the hardware to function properly on at least Sony Xperia 1 IV.
Without this, I2C transactions with the SLG51000 straight up fail.

Relax (10-10ms -> 10-11ms) and add the aforementioned sleep to make
sure the hardware has some time to wake up.

(nagara-2.0.0-mlc/vendor/semc/hardware/camera-kernel-module/)
[1] https://developer.sony.com/file/download/open-source-archive-for-64-0-m-4-29/

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221118131035.54874-1-konrad.dybcio@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

9p/fd: Use P9_HDRSZ for header size

[ Upstream commit 6854fadbeee10891ed74246bdc05031906b6c8cf ]

Cleanup hardcoded header sizes to use P9_HDRSZ instead of '7'

Link: https://lkml.kernel.org/r/20221117091159.31533-4-guozihua@huawei.com
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
[Dominique: commit message adjusted to make sense after offset size
adjustment got removed]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt711-sdca: fix the latency time of clock stop prepare state machine transitions

[ Upstream commit c7d7d4e7bb1290cc473610b0bb96d9fa606d00e7 ]

Due to the hardware behavior, it takes some time for CBJ detection/impedance sensing/de-bounce.
The ClockStop_NotFinished flag will be raised until these functions are completed.
In ClockStopMode0 mode case, the SdW controller might check this flag from D3 to D0 when the
jack detection interrupt happened.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20221116090318.5017-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188

[ Upstream commit da74858a475782a3f16470907814c8cc5950ad68 ]

The clock source and the sched_clock provided by the arm_global_timer
on Rockchip rk3066a/rk3188 are quite unstable because their rates
depend on the CPU frequency.

Recent changes to the arm_global_timer driver makes it impossible to use.

On the other side, the arm_global_timer has a higher rating than the
ROCKCHIP_TIMER, it will be selected by default by the time framework
while we want to use the stable Rockchip clock source.

Keep the arm_global_timer disabled in order to have the
DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/f275ca8d-fd0a-26e5-b978-b7f3df815e0a@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: mediatek: Fix DEVAPC Violation at KO Remove

[ Upstream commit 0d10e90cee9eb57882b0f7e19fd699033722e226 ]

A DEVAPC violation occurs when removing the module
due to accessing HW registers without base clock.
To fix this bug, the correct method is:
1. Call the runtime resume function to enable the
clock;
2. Operate the registers to reset the HW;
3. Turn off the clocks and disable the device
RPM mechanism.

Signed-off-by: Zhichao Liu <zhichao.liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221110072839.30961-1-zhichao.liu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wm8962: Wait for updated value of WM8962_CLOCKING1 register

[ Upstream commit 3ca507bf99611c82dafced73e921c1b10ee12869 ]

DSPCLK_DIV field in WM8962_CLOCKING1 register is used to generate
correct frequency of LRCLK and BCLK. Sometimes the read-only value
can't be updated timely after enabling SYSCLK. This results in wrong
calculation values. Delay is introduced here to wait for newest value
from register. The time of the delay should be at least 500~1000us
according to test.

Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221109121354.123958-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9266/1: mm: fix no-MMU ZERO_PAGE() implementation

[ Upstream commit 340a982825f76f1cff0daa605970fe47321b5ee7 ]

Actually in no-MMU SoCs(i.e. i.MXRT) ZERO_PAGE(vaddr) expands to
```
virt_to_page(0)
```
that in order expands to:
```
pfn_to_page(virt_to_pfn(0))
```
and then virt_to_pfn(0) to:
```
((((unsigned long)(0) - PAGE_OFFSET) >> PAGE_SHIFT) +
PHYS_PFN_OFFSET)
```
where PAGE_OFFSET and PHYS_PFN_OFFSET are the DRAM offset(0x80000000) and
PAGE_SHIFT is 12. This way we obtain 16MB(0x01000000) summed to the base of
DRAM(0x80000000).
When ZERO_PAGE(0) is then used, for example in bio_add_page(), the page
gets an address that is out of DRAM bounds.
So instead of using fake virtual page 0 let's allocate a dedicated
zero_page during paging_init() and assign it to a global 'struct page *
empty_zero_page' the same way mmu.c does and it's the same approach used
in m68k with commit dc068f462179 as discussed here[0]. Then let's move
ZERO_PAGE() definition to the top of pgtable.h to be in common between
mmu.c and nommu.c.

[0]: https://lore.kernel.org/linux-m68k/2a462b23-5b8e-bbf4-ec7d-778434a3b9d7@google.com/T/#m1266ceb63
ad140743174d6b3070364d3c9a5179b

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9251/1: perf: Fix stacktraces for tracepoint events in THUMB2 kernels

[ Upstream commit 612695bccfdbd52004551308a55bae410e7cd22f ]

Store the frame address where arm_get_current_stackframe() looks for it
(ARM_r7 instead of ARM_fp if CONFIG_THUMB2_KERNEL=y). Otherwise frame->fp
gets set to 0, causing unwind_frame() to fail.

  # bpftrace -e 't:sched:sched_switch { @[kstack] = count(); exit(); }'
  Attaching 1 probe...
  @[
      __schedule+1059
  ]: 1

A typical first unwind instruction is 0x97 (SP = R7), so after executing
it SP ends up being 0 and -URC_FAILURE is returned.

  unwind_frame(pc = ac9da7d7 lr = 00000000 sp = c69bdda0 fp = 00000000)
  unwind_find_idx(ac9da7d7)
  unwind_exec_insn: insn = 00000097
  unwind_exec_insn: fp = 00000000 sp = 00000000 lr = 00000000 pc = 00000000

With this patch:

  # bpftrace -e 't:sched:sched_switch { @[kstack] = count(); exit(); }'
  Attaching 1 probe...
  @[
      __schedule+1059
      __schedule+1059
      schedule+79
      schedule_hrtimeout_range_clock+163
      schedule_hrtimeout_range+17
      ep_poll+471
      SyS_epoll_wait+111
      sys_epoll_pwait+231
      __ret_fast_syscall+1
  ]: 1

Link: https://lore.kernel.org/r/20220920230728.2617421-1-tnovak@fb.com/
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tomislav Novak <tnovak@fb.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: use acquire ordering in __fget_light()

[ Upstream commit 7ee47dcfff1835ff75a794d1075b6b5f5462cfed ]

We must prevent the CPU from reordering the files->count read with the
FD table access like this, on architectures where read-read reordering is
possible:

    files_lookup_fd_raw()
                                  close_fd()
                                  put_files_struct()
    atomic_read(&files->count)

I would like to mark this for stable, but the stable rules explicitly say
"no theoretical races", and given that the FD table pointer and
files->count are explicitly stored in the same cacheline, this sort of
reordering seems quite unlikely in practice...

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: rockchip: rk3188: fix lcdc1-rgb24 node name

[ Upstream commit 11871e20bcb23c00966e785a124fb72bc8340af4 ]

The lcdc1-rgb24 node name is out of line with the rest
of the rk3188 lcdc1 node, so fix it.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/7b9c0a6f-626b-07e8-ae74-7e0f08b8d241@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: fix ir-receiver node names

[ Upstream commit de0d04b9780a23eb928aedfb6f981285f78d58e5 ]

Fix ir-receiver node names on Rockchip boards,
so that they match with regex: '^ir(-receiver)?(@[a-f0-9]+)?$'

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/e9764253-8ce8-150b-4820-41f03f845469@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: rockchip: fix ir-receiver node names

[ Upstream commit dd847fe34cdf1e89afed1af24986359f13082bfb ]

Fix ir-receiver node names on Rockchip boards,
so that they match with regex: '^ir(-receiver)?(@[a-f0-9]+)?$'

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/ea5af279-f44c-afea-023d-bb37f5a0d58d@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm: dts: rockchip: remove clock-frequency from rtc

[ Upstream commit 6122f3be70d90a1b2a1188d8910256fc218376a9 ]

'clock-frequency' is not part of the DT binding and not supported by the
Linux driver.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221024165549.74574-5-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm: dts: rockchip: fix node name for hym8563 rtc

[ Upstream commit 17b57beafccb4569accbfc8c11390744cf59c021 ]

Fix the node name for hym8563 in all arm rockchip devicetrees.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221024165549.74574-4-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: keep I2S1 disabled for GPIO function on ROCK Pi 4 series

[ Upstream commit 849c19d14940b87332d5d59c7fc581d73f2099fd ]

I2S1 pins are exposed on 40-pin header on Radxa ROCK Pi 4 series.
their default function is GPIO, so I2S1 need to be disabled.

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20220924112812.1219-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: mtk-sd: Fix missing clk_disable_unprepare in msdc_of_clock_parse()

[ Upstream commit c61bfb1cb63ddab52b31cf5f1924688917e61fad ]

The clk_disable_unprepare() should be called in the error handling
of devm_clk_bulk_get_optional, fix it by replacing devm_clk_get_optional
and clk_prepare_enable by devm_clk_get_optional_enabled.

Fixes: f5eccd94b63f ("mmc: mediatek: Add subsys clock control for MT8192 msdc")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221125090141.3626747-1-cuigaosheng1@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: Provide new devm_clk helpers for prepared and enabled clocks

[ Upstream commit 7ef9651e9792b08eb310c6beb202cbc947f43cab ]

When a driver keeps a clock prepared (or enabled) during the whole
lifetime of the driver, these helpers allow to simplify the drivers.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220520075737.758761-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: c61bfb1cb63d ("mmc: mtk-sd: Fix missing clk_disable_unprepare in msdc_of_clock_parse()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: generalize devm_clk_get() a bit

[ Upstream commit abae8e57e49aa75f6db76aa866c775721523908f ]

Allow to add an exit hook to devm managed clocks. Also use
clk_get_optional() in devm_clk_get_optional instead of open coding it.
The generalisation will be used in the next commit to add some more
devm_clk helpers.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220520075737.758761-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: c61bfb1cb63d ("mmc: mtk-sd: Fix missing clk_disable_unprepare in msdc_of_clock_parse()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.15.82

Link: https://lore.kernel.org/r/20221205190806.528972574@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Link: https://lore.kernel.org/r/20221206124052.595650754@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20221206163439.841627689@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

proc: proc_skip_spaces() shouldn't think it is working on C strings

commit bce9332220bd677d83b19d21502776ad555a0e73 upstream.

proc_skip_spaces() seems to think it is working on C strings, and ends
up being just a wrapper around skip_spaces() with a really odd calling
convention.

Instead of basing it on skip_spaces(), it should have looked more like
proc_skip_char(), which really is the exact same function (except it
skips a particular character, rather than whitespace). So use that as
inspiration, odd coding and all.

Now the calling convention actually makes sense and works for the
intended purpose.

Reported-and-tested-by: Kyle Zeng <zengyhkyle@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

proc: avoid integer type confusion in get_proc_long

commit e6cfaf34be9fcd1a8285a294e18986bfc41a409c upstream.

proc_get_long() is passed a size_t, but then assigns it to an 'int'
variable for the length. Let's not do that, even if our IO paths are
limited to MAX_RW_COUNT (exactly because of these kinds of type errors).

So do the proper test in the rigth type.

Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipc/sem: Fix dangling sem_array access in semtimedop race

commit b52be557e24c47286738276121177a41f54e3b83 upstream.

When __do_semtimedop() goes to sleep because it has to wait for a
semaphore value becoming zero or becoming bigger than some threshold, it
links the on-stack sem_queue to the sem_array, then goes to sleep
without holding a reference on the sem_array.

When __do_semtimedop() comes back out of sleep, one of two things must
happen:

a) We prove that the on-stack sem_queue has been disconnected from the
    (possibly freed) sem_array, making it safe to return from the stack
    frame that the sem_queue exists in.

b) We stabilize our reference to the sem_array, lock the sem_array, and
    detach the sem_queue from the sem_array ourselves.

sem_array has RCU lifetime, so for case (b), the reference can be
stabilized inside an RCU read-side critical section by locklessly
checking whether the sem_queue is still connected to the sem_array.

However, the current code does the lockless check on sem_queue before
starting an RCU read-side critical section, so the result of the
lockless check immediately becomes useless.

Fix it by doing rcu_read_lock() before the lockless check.  Now RCU
ensures that if we observe the object being on our queue, the object
can't be freed until rcu_read_unlock().

This bug is only hittable on kernel builds with full preemption support
(either CONFIG_PREEMPT or PREEMPT_DYNAMIC with preempt=full).

Fixes: 370b262c896e ("ipc/sem: avoid idr tree lookup for interrupted semop")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: raydium_ts_i2c - fix memory leak in raydium_i2c_send()

commit 8c9a59939deb4bfafdc451100c03d1e848b4169b upstream.

There is a kmemleak when test the raydium_i2c_ts with bpf mock device:

  unreferenced object 0xffff88812d3675a0 (size 8):
    comm "python3", pid 349, jiffies 4294741067 (age 95.695s)
    hex dump (first 8 bytes):
      11 0e 10 c0 01 00 04 00                          ........
    backtrace:
      [<0000000068427125>] __kmalloc+0x46/0x1b0
      [<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts]
      [<000000006e631aee>] raydium_i2c_initialize.cold+0xbc/0x3e4 [raydium_i2c_ts]
      [<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts]
      [<00000000a310de16>] i2c_device_probe+0x651/0x680
      [<00000000f5a96bf3>] really_probe+0x17c/0x3f0
      [<00000000096ba499>] __driver_probe_device+0xe3/0x170
      [<00000000c5acb4d9>] driver_probe_device+0x49/0x120
      [<00000000264fe082>] __device_attach_driver+0xf7/0x150
      [<00000000f919423c>] bus_for_each_drv+0x114/0x180
      [<00000000e067feca>] __device_attach+0x1e5/0x2d0
      [<0000000054301fc2>] bus_probe_device+0x126/0x140
      [<00000000aad93b22>] device_add+0x810/0x1130
      [<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0
      [<000000003c2c248c>] of_i2c_register_device+0xf1/0x110
      [<00000000ffec4177>] of_i2c_notify+0x100/0x160
  unreferenced object 0xffff88812d3675c8 (size 8):
    comm "python3", pid 349, jiffies 4294741070 (age 95.692s)
    hex dump (first 8 bytes):
      22 00 36 2d 81 88 ff ff                          ".6-....
    backtrace:
      [<0000000068427125>] __kmalloc+0x46/0x1b0
      [<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts]
      [<000000001d5c9620>] raydium_i2c_initialize.cold+0x223/0x3e4 [raydium_i2c_ts]
      [<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts]
      [<00000000a310de16>] i2c_device_probe+0x651/0x680
      [<00000000f5a96bf3>] really_probe+0x17c/0x3f0
      [<00000000096ba499>] __driver_probe_device+0xe3/0x170
      [<00000000c5acb4d9>] driver_probe_device+0x49/0x120
      [<00000000264fe082>] __device_attach_driver+0xf7/0x150
      [<00000000f919423c>] bus_for_each_drv+0x114/0x180
      [<00000000e067feca>] __device_attach+0x1e5/0x2d0
      [<0000000054301fc2>] bus_probe_device+0x126/0x140
      [<00000000aad93b22>] device_add+0x810/0x1130
      [<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0
      [<000000003c2c248c>] of_i2c_register_device+0xf1/0x110
      [<00000000ffec4177>] of_i2c_notify+0x100/0x160

After BANK_SWITCH command from i2c BUS, no matter success or error
happened, the tx_buf should be freed.

Fixes: 3b384bd6c3f2 ("Input: raydium_ts_i2c - do not split tx transactions")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Link: https://lore.kernel.org/r/20221202103412.2120169-1-zhangxiaoxu5@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

char: tpm: Protect tpm_pm_suspend with locks

commit 23393c6461422df5bf8084a086ada9a7e17dc2ba upstream.

Currently tpm transactions are executed unconditionally in
tpm_pm_suspend() function, which may lead to races with other tpm
accessors in the system.

Specifically, the hw_random tpm driver makes use of tpm_get_random(),
and this function is called in a loop from a kthread, which means it's
not frozen alongside userspace, and so can race with the work done
during system suspend:

  tpm tpm0: tpm_transmit: tpm_recv: error -52
  tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics
  CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ #135
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
  Call Trace:
   tpm_tis_status.cold+0x19/0x20
   tpm_transmit+0x13b/0x390
   tpm_transmit_cmd+0x20/0x80
   tpm1_pm_suspend+0xa6/0x110
   tpm_pm_suspend+0x53/0x80
   __pnp_bus_suspend+0x35/0xe0
   __device_suspend+0x10f/0x350

Fix this by calling tpm_try_get_ops(), which itself is a wrapper around
tpm_chip_start(), but takes the appropriate mutex.

Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/all/c5ba47ef-393f-1fba-30bd-1230d1b4b592@suse.cz/
Cc: stable@vger.kernel.org
Fixes: e891db1a18bf ("tpm: turn on TPM on suspend for TPM 1.x")
[Jason: reworked commit message, added metadata]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "clocksource/drivers/riscv: Events are stopped during CPU suspend"

[ Upstream commit d9f15a9de44affe733e34f93bc184945ba277e6d ]

This reverts commit 232ccac1bd9b5bfe73895f527c08623e7fa0752d.

On the subject of suspend, the RISC-V SBI spec states:

  This does not cover whether any given events actually reach the hart or
  not, just what the hart will do if it receives an event. On PolarFire
  SoC, and potentially other SiFive based implementations, events from the
  RISC-V timer do reach a hart during suspend. This is not the case for the
  implementation on the Allwinner D1 - there timer events are not received
  during suspend.

To fix this, the CLOCK_EVT_FEAT_C3STOP (mis)feature was enabled for the
timer driver - but this has broken both RCU stall detection and timers
generally on PolarFire SoC and potentially other SiFive based
implementations.

If an AXI read to the PCIe controller on PolarFire SoC times out, the
system will stall, however, with CLOCK_EVT_FEAT_C3STOP active, the system
just locks up without RCU stalling:

io scheduler mq-deadline registered
io scheduler kyber registered
microchip-pcie 2000000000.pcie: host bridge /soc/pcie@2000000000 ranges:
microchip-pcie 2000000000.pcie:      MEM 0x2008000000..0x2087ffffff -> 0x0008000000
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
microchip-pcie 2000000000.pcie: axi read request error
microchip-pcie 2000000000.pcie: axi read timeout
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
Freeing initrd memory: 7332K

Similarly issues were reported with clock_nanosleep() - with a test app
that sleeps each cpu for 6, 5, 4, 3 ms respectively, HZ=250 & the blamed
commit in place, the sleep times are rounded up to the next jiffy:

== CPU: 1 ==      == CPU: 2 ==      == CPU: 3 ==      == CPU: 4 ==
Mean: 7.974992    Mean: 7.976534    Mean: 7.962591    Mean: 3.952179
Std Dev: 0.154374 Std Dev: 0.156082 Std Dev: 0.171018 Std Dev: 0.076193
Hi: 9.472000      Hi: 10.495000     Hi: 8.864000      Hi: 4.736000
Lo: 6.087000      Lo: 6.380000      Lo: 4.872000      Lo: 3.403000
Samples: 521      Samples: 521      Samples: 521      Samples: 521

Fortunately, the D1 has a second timer, which is "currently used in
preference to the RISC-V/SBI timer driver" so a revert here does not
hurt operation of D1 in its current form.

Ultimately, a DeviceTree property (or node) will be added to encode the
behaviour of the timers, but until then revert the addition of
CLOCK_EVT_FEAT_C3STOP.

Fixes: 232ccac1bd9b ("clocksource/drivers/riscv: Events are stopped during CPU suspend")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/linux-riscv/YzYTNQRxLr7Q9JR0@spud/
Link: https://github.com/riscv-non-isa/riscv-sbi-doc/issues/98/
Link: https://lore.kernel.org/linux-riscv/bf6d3b1f-f703-4a25-833e-972a44a04114@sholland.org/
Link: https://lore.kernel.org/r/20221122121620.3522431-1-conor.dooley@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: HMAT: Fix initiator registration for single-initiator systems

[ Upstream commit 48d4180939e12c4bd2846f984436d895bb9699ed ]

In a system with a single initiator node, and one or more memory-only
'target' nodes, the memory-only node(s) would fail to register their
initiator node correctly. i.e. in sysfs:

  # ls /sys/devices/system/node/node0/access0/targets/
  node0

Where as the correct behavior should be:

  # ls /sys/devices/system/node/node0/access0/targets/
  node0 node1

This happened because hmat_register_target_initiators() uses list_sort()
to sort the initiator list, but the sort comparision function
(initiator_cmp()) is overloaded to also set the node mask's bits.

In a system with a single initiator, the list is singular, and list_sort
elides the comparision helper call. Thus the node mask never gets set,
and the subsequent search for the best initiator comes up empty.

Add a new helper to consume the sorted initiator list, and generate the
nodemask, decoupling it from the overloaded initiator_cmp() comparision
callback. This prevents the singular list corner case naturally, and
makes the code easier to follow as well.

Cc: <stable@vger.kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Chris Piper <chris.d.piper@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20221116-acpi_hmat_fix-v2-2-3712569be691@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: HMAT: remove unnecessary variable initialization

[ Upstream commit 14f16d47561ba9249efc6c2db9d47ed56841f070 ]

In hmat_register_target_initiators(), the variable 'best' gets
initialized in the outer per-locality-type for loop. The initialization
just before setting up 'Access 1' targets was unnecessary. Remove it.

Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20221116-acpi_hmat_fix-v2-1-3712569be691@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 48d4180939e1 ("ACPI: HMAT: Fix initiator registration for single-initiator systems")
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: imx: Only DMA messages with I2C_M_DMA_SAFE flag set

[ Upstream commit d36678f7905cbd1dc55a8a96e066dafd749d4600 ]

Recent changes to the DMA code has resulting in the IMX driver failing
I2C transfers when the buffer has been vmalloc. Only perform DMA
transfers if the message has the I2C_M_DMA_SAFE flag set, indicating
the client is providing a buffer which is DMA safe.

This is a minimal fix for stable. The I2C core provides helpers to
allocate a bounce buffer. For a fuller fix the master should make use
of these helpers.

Fixes: 4544b9f25e70 ("dma-mapping: Add vmap checks to dma_map_single()")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: npcm7xx: Fix error handling in npcm_i2c_init()

[ Upstream commit 145900cf91c4b32ac05dbc8675a0c7f4a278749d ]

A problem about i2c-npcm7xx create debugfs failed is triggered with the
following log given:

[  173.827310] debugfs: Directory 'npcm_i2c' with parent '/' already present!

The reason is that npcm_i2c_init() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of npcm_i2c can never be created later.

npcm_i2c_init()
   debugfs_create_dir() # create debugfs directory
   platform_driver_register()
     driver_register()
       bus_add_driver()
         priv = kzalloc(...) # OOM happened
   # return without destroy debugfs directory

Fix by removing debugfs when platform_driver_register() returns error.

Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Tali Perry <tali.perry@nuvoton.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: Deassert Transmit Enable on ->rs485_config()

[ Upstream commit adafbbf6895eb0ce41a313c6ee68870ab9aa93cd ]

The STM32 USART can control RS-485 Transmit Enable in hardware.  Since
commit 7df5081cbf5e ("serial: stm32: Add RS485 RTS GPIO control"),
it can alternatively be controlled in software.  That was done to allow
RS-485 even if the RTS pin is unavailable because it's pinmuxed to a
different function.

However the commit neglected to deassert Transmit Enable upon invocation
of the ->rs485_config() callback.  Fix it.

Avoid forward declarations by moving stm32_usart_tx_empty(),
stm32_usart_rs485_rts_enable() and stm32_usart_rs485_rts_disable()
further up in the driver.

Fixes: 7df5081cbf5e ("serial: stm32: Add RS485 RTS GPIO control")
Cc: stable@vger.kernel.org # v5.9+
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/6059eab35dba394468335ef640df8b0050fd9dbd.1662886616.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode

[ Upstream commit d7c76716169ddc37cf6316ff381d34ea807fbfd7 ]

In case the RS485 mode is emulated using GPIO RTS, use the TC interrupt
to deassert the GPIO RTS, otherwise the GPIO RTS stays asserted after a
transmission ended and the RS485 cannot work.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Erwan Le Ray <erwan.leray@foss.st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jean Philippe Romain <jean-philippe.romain@foss.st.com>
Cc: Valentin Caron <valentin.caron@foss.st.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-serial@vger.kernel.org
Link: https://lore.kernel.org/r/20220430162845.244655-2-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: Factor out GPIO RTS toggling into separate function

[ Upstream commit 3bcea529b295a993b1b05db63f245ae8030c5acf ]

Pull out the GPIO RTS enable and disable handling into separate function.
Limit the scope of GPIO RTS toggling only to GPIO emulated RS485 too.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Erwan Le Ray <erwan.leray@foss.st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jean Philippe Romain <jean-philippe.romain@foss.st.com>
Cc: Valentin Caron <valentin.caron@foss.st.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-serial@vger.kernel.org
Link: https://lore.kernel.org/r/20220430162845.244655-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv4: Fix route deletion when nexthop info is not specified

[ Upstream commit d5082d386eee7e8ec46fa8581932c81a4961dcef ]

When the kernel receives a route deletion request from user space it
tries to delete a route that matches the route attributes specified in
the request.

If only prefix information is specified in the request, the kernel
should delete the first matching FIB alias regardless of its associated
FIB info. However, an error is currently returned when the FIB info is
backed by a nexthop object:

# ip nexthop add id 1 via 192.0.2.2 dev dummy10
# ip route add 198.51.100.0/24 nhid 1
# ip route del 198.51.100.0/24
RTNETLINK answers: No such process

Fix by matching on such a FIB info when legacy nexthop attributes are
not specified in the request. An earlier check already covers the case
where a nexthop ID is specified in the request.

Add tests that cover these flows. Before the fix:

# ./fib_nexthops.sh -t ipv4_fcnal
...
TEST: Delete route when not specifying nexthop attributes           [FAIL]

Tests passed:  11
Tests failed:   1

After the fix:

# ./fib_nexthops.sh -t ipv4_fcnal
...
TEST: Delete route when not specifying nexthop attributes           [ OK ]

Tests passed:  12
Tests failed:   0

No regressions in other tests:

# ./fib_nexthops.sh
...
Tests passed: 228
Tests failed:   0

# ./fib_tests.sh
...
Tests passed: 186
Tests failed:   0

Cc: stable@vger.kernel.org
Reported-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Jonas Gorski <jonas.gorski@gmail.com>
Fixes: 493ced1ac47c ("ipv4: Allow routes to use nexthop objects")
Fixes: 6bf92d70e690 ("net: ipv4: fix route with nexthop object delete warning")
Fixes: 61b91eb33a69 ("ipv4: Handle attempt to delete multipath route when fib_info contains an nh reference")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20221124210932.2470010-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv4: Handle attempt to delete multipath route when fib_info contains an nh reference

[ Upstream commit 61b91eb33a69c3be11b259c5ea484505cd79f883 ]

Gwangun Jung reported a slab-out-of-bounds access in fib_nh_match:
    fib_nh_match+0xf98/0x1130 linux-6.0-rc7/net/ipv4/fib_semantics.c:961
    fib_table_delete+0x5f3/0xa40 linux-6.0-rc7/net/ipv4/fib_trie.c:1753
    inet_rtm_delroute+0x2b3/0x380 linux-6.0-rc7/net/ipv4/fib_frontend.c:874

Separate nexthop objects are mutually exclusive with the legacy
multipath spec. Fix fib_nh_match to return if the config for the
to be deleted route contains a multipath spec while the fib_info
is using a nexthop object.

Fixes: 493ced1ac47c ("ipv4: Allow routes to use nexthop objects")
Fixes: 6bf92d70e690 ("net: ipv4: fix route with nexthop object delete warning")
Reported-by: Gwangun Jung <exsociety@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: d5082d386eee ("ipv4: Fix route deletion when nexthop info is not specified")
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: net: fix nexthop warning cleanup double ip typo

[ Upstream commit 692930cc435099580a4b9e32fa781b0688c18439 ]

I made a stupid typo when adding the nexthop route warning selftest and
added both $IP and ip after it (double ip) on the cleanup path. The
error doesn't show up when running the test, but obviously it doesn't
cleanup properly after it.

Fixes: 392baa339c6a ("selftests: net: add delete nexthop route warning test")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: d5082d386eee ("ipv4: Fix route deletion when nexthop info is not specified")
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: net: add delete nexthop route warning test

[ Upstream commit 392baa339c6a42a2cb088e5e5df2b59b8f89be24 ]

Add a test which causes a WARNING on kernels which treat a
nexthop route like a normal route when comparing for deletion and a
device is specified. That is, a route is found but we hit a warning while
matching it. The warning is from fib_info_nh() in include/net/nexthop.h
because we run it on a fib_info with nexthop object. The call chain is:
inet_rtm_delroute -> fib_table_delete -> fib_nh_match (called with a
nexthop fib_info and also with fc_oif set thus calling fib_info_nh on
the fib_info and triggering the warning).

Repro steps:
$ ip nexthop add id 12 via 172.16.1.3 dev veth1
$ ip route add 172.16.101.1/32 nhid 12
$ ip route delete 172.16.101.1/32 dev veth1

Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: d5082d386eee ("ipv4: Fix route deletion when nexthop info is not specified")
Signed-off-by: Sasha Levin <sashal@kernel.org>

Kconfig.debug: provide a little extra FRAME_WARN leeway when KASAN is enabled

[ Upstream commit 152fe65f300e1819d59b80477d3e0999b4d5d7d2 ]

When enabled, KASAN enlarges function's stack-frames. Pushing quite a few
over the current threshold. This can mainly be seen on 32-bit
architectures where the present limit (when !GCC) is a lowly 1024-Bytes.

Link: https://lkml.kernel.org/r/20221125120750.3537134-3-lee@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: Increase FRAME_WARN to 2048 bytes on parisc

[ Upstream commit 8d192bec534bd5b778135769a12e5f04580771f7 ]

PA-RISC uses a much bigger frame size for functions than other
architectures. So increase it to 2048 for 32- and 64-bit kernels.
This fixes e.g. a warning in lib/xxhash.c.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Stable-dep-of: 152fe65f300e ("Kconfig.debug: provide a little extra FRAME_WARN leeway when KASAN is enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm: migrate: fix THP's mapcount on isolation

[ Upstream commit 829ae0f81ce093d674ff2256f66a714753e9ce32 ]

The issue is reported when removing memory through virtio_mem device.  The
transparent huge page, experienced copy-on-write fault, is wrongly
regarded as pinned.  The transparent huge page is escaped from being
isolated in isolate_migratepages_block().  The transparent huge page can't
be migrated and the corresponding memory block can't be put into offline
state.

Fix it by replacing page_mapcount() with total_mapcount().  With this, the
transparent huge page can be isolated and migrated, and the memory block
can be put into offline state.  Besides, The page's refcount is increased
a bit earlier to avoid the page is released when the check is executed.

Link: https://lkml.kernel.org/r/20221124095523.31061-1-gshan@redhat.com
Fixes: 1da2f328fa64 ("mm,thp,compaction,cma: allow THP migration for CMA allocations")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reported-by: Zhenyu Zhang <zhenyzha@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org> [5.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm: __isolate_lru_page_prepare() in isolate_migratepages_block()

[ Upstream commit 89f6c88a6ab4a11deb14c270f7f1454cda4f73d6 ]

__isolate_lru_page_prepare() conflates two unrelated functions, with the
flags to one disjoint from the flags to the other; and hides some of the
important checks outside of isolate_migratepages_block(), where the
sequence is better to be visible. It comes from the days of lumpy
reclaim, before compaction, when the combination made more sense.

Move what's needed by mm/compaction.c isolate_migratepages_block() inline
there, and what's needed by mm/vmscan.c isolate_lru_pages() inline there.

Shorten "isolate_mode" to "mode", so the sequence of conditions is easier
to read. Declare a "mapping" variable, to save one call to page_mapping()
(but not another: calling again after page is locked is necessary).
Simplify isolate_lru_pages() with a "move_to" list pointer.

Link: https://lkml.kernel.org/r/879d62a8-91cc-d3c6-fb3b-69768236df68@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Alex Shi <alexs@kernel.org>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: 829ae0f81ce0 ("mm: migrate: fix THP's mapcount on isolation")
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Fix PCI device refcount leak in dmar_dev_scope_init()

[ Upstream commit 4bedbbd782ebbe7287231fea862c158d4f08a9e3 ]

for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.

If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() for the error path to avoid reference count leak.

Fixes: 2e4552893038 ("iommu/vt-d: Unify the way to process DMAR device scope array")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221121113649.190393-3-wangxiongfeng2@huawei.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Fix PCI device refcount leak in has_external_pci()

[ Upstream commit afca9e19cc720bfafc75dc5ce429c185ca93f31d ]

for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.

If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() before 'return true' to avoid reference count leak.

Fixes: 89a6079df791 ("iommu/vt-d: Force IOMMU on for platform opt in hint")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221121113649.190393-2-wangxiongfeng2@huawei.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: fix SRCU protection of nvme_ns_head list

[ Upstream commit 899d2a05dc14733cfba6224083c6b0dd5a738590 ]

Walking the nvme_ns_head siblings list is protected by the head's srcu
in nvme_ns_head_submit_bio() but not nvme_mpath_revalidate_paths().
Removing namespaces from the list also fails to synchronize the srcu.
Concurrent scan work can therefore cause use-after-frees.

Hold the head's srcu lock in nvme_mpath_revalidate_paths() and
synchronize with the srcu, not the global RCU, in nvme_ns_remove().

Observed the following panic when making NVMe/RDMA connections
with native multipath on the Rocky Linux 8.6 kernel
(it seems the upstream kernel has the same race condition).
Disassembly shows the faulting instruction is cmp 0x50(%rdx),%rcx;
computing capacity != get_capacity(ns->disk).
Address 0x50 is dereferenced because ns->disk is NULL.
The NULL disk appears to be the result of concurrent scan work
freeing the namespace (note the log line in the middle of the panic).

[37314.206036] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
[37314.206036] nvme0n3: detected capacity change from 0 to 11811160064
[37314.299753] PGD 0 P4D 0
[37314.299756] Oops: 0000 [#1] SMP PTI
[37314.299759] CPU: 29 PID: 322046 Comm: kworker/u98:3 Kdump: loaded Tainted: G        W      X --------- -  - 4.18.0-372.32.1.el8test86.x86_64 #1
[37314.299762] Hardware name: Dell Inc. PowerEdge R720/0JP31P, BIOS 2.7.0 05/23/2018
[37314.299763] Workqueue: nvme-wq nvme_scan_work [nvme_core]
[37314.299783] RIP: 0010:nvme_mpath_revalidate_paths+0x26/0xb0 [nvme_core]
[37314.299790] Code: 1f 44 00 00 66 66 66 66 90 55 53 48 8b 5f 50 48 8b 83 c8 c9 00 00 48 8b 13 48 8b 48 50 48 39 d3 74 20 48 8d 42 d0 48 8b 50 20 <48> 3b 4a 50 74 05 f0 80 60 70 ef 48 8b 50 30 48 8d 42 d0 48 39 d3
[37315.058803] RSP: 0018:ffffabe28f913d10 EFLAGS: 00010202
[37315.121316] RAX: ffff927a077da800 RBX: ffff92991dd70000 RCX: 0000000001600000
[37315.206704] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff92991b719800
[37315.292106] RBP: ffff929a6b70c000 R08: 000000010234cd4a R09: c0000000ffff7fff
[37315.377501] R10: 0000000000000001 R11: ffffabe28f913a30 R12: 0000000000000000
[37315.462889] R13: ffff92992716600c R14: ffff929964e6e030 R15: ffff92991dd70000
[37315.548286] FS:  0000000000000000(0000) GS:ffff92b87fb80000(0000) knlGS:0000000000000000
[37315.645111] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[37315.713871] CR2: 0000000000000050 CR3: 0000002208810006 CR4: 00000000000606e0
[37315.799267] Call Trace:
[37315.828515]  nvme_update_ns_info+0x1ac/0x250 [nvme_core]
[37315.892075]  nvme_validate_or_alloc_ns+0x2ff/0xa00 [nvme_core]
[37315.961871]  ? __blk_mq_free_request+0x6b/0x90
[37316.015021]  nvme_scan_work+0x151/0x240 [nvme_core]
[37316.073371]  process_one_work+0x1a7/0x360
[37316.121318]  ? create_worker+0x1a0/0x1a0
[37316.168227]  worker_thread+0x30/0x390
[37316.212024]  ? create_worker+0x1a0/0x1a0
[37316.258939]  kthread+0x10a/0x120
[37316.297557]  ? set_kthread_struct+0x50/0x50
[37316.347590]  ret_from_fork+0x35/0x40
[37316.390360] Modules linked in: nvme_rdma nvme_tcp(X) nvme_fabrics nvme_core netconsole iscsi_tcp libiscsi_tcp dm_queue_length dm_service_time nf_conntrack_netlink br_netfilter bridge stp llc overlay nft_chain_nat ipt_MASQUERADE nf_nat xt_addrtype xt_CT nft_counter xt_state xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment xt_multiport nft_compat nf_tables libcrc32c nfnetlink dm_multipath tg3 rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm intel_rapl_msr iTCO_wdt iTCO_vendor_support dcdbas intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ipmi_ssif kvm irqbypass crct10dif_pclmul crc32_pclmul mlx5_ib ghash_clmulni_intel ib_uverbs rapl intel_cstate intel_uncore ib_core ipmi_si joydev mei_me pcspkr ipmi_devintf mei lpc_ich wmi ipmi_msghandler acpi_power_meter ext4 mbcache jbd2 sd_mod t10_pi sg mgag200 mlx5_core drm_kms_helper syscopyarea
[37316.390419]  sysfillrect ahci sysimgblt fb_sys_fops libahci drm crc32c_intel libata mlxfw pci_hyperv_intf tls i2c_algo_bit psample dm_mirror dm_region_hash dm_log dm_mod fuse [last unloaded: nvme_core]
[37317.645908] CR2: 0000000000000050

Fixes: e7d65803e2bb ("nvme-multipath: revalidate paths during rescan")
Signed-off-by: Caleb Sander <csander@purestorage.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: kexec: Fixup irq controller broken in kexec crash path

[ Upstream commit b17d19a5314a37f7197afd1a0200affd21a7227d ]

If a crash happens on cpu3 and all interrupts are binding on cpu0, the
bad irq routing will cause a crash kernel which can't receive any irq.
Because crash kernel won't clean up all harts' PLIC enable bits in
enable registers. This patch is similar to 9141a003a491 ("ARM: 7316/1:
kexec: EOI active and mask all interrupts in kexec crash path") and
78fd584cdec0 ("arm64: kdump: implement machine_crash_shutdown()"), and
PowerPC also has the same mechanism.

Fixes: fba8a8674f68 ("RISC-V: Add kexec support")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Cc: Nick Kossifidis <mick@ics.forth.gr>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20221020141603.2856206-2-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: fix race when vmap stack overflow

[ Upstream commit 7e1864332fbc1b993659eab7974da9fe8bf8c128 ]

Currently, when detecting vmap stack overflow, riscv firstly switches
to the so called shadow stack, then use this shadow stack to call the
get_overflow_stack() to get the overflow stack. However, there's
a race here if two or more harts use the same shadow stack at the same
time.

To solve this race, we introduce spin_shadow_stack atomic var, which
will be swap between its own address and 0 in atomic way, when the
var is set, it means the shadow_stack is being used; when the var
is cleared, it means the shadow_stack isn't being used.

Fixes: 31da94c25aea ("riscv: add VMAP_STACK overflow detection")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Suggested-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20221030124517.2370-1-jszhang@kernel.org
[Palmer: Add AQ to the swap, and also some comments.]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: Sync efi page table's kernel mappings before switching

[ Upstream commit 3f105a742725a1b78766a55169f1d827732e62b8 ]

The EFI page table is initially created as a copy of the kernel page table.
With VMAP_STACK enabled, kernel stacks are allocated in the vmalloc area:
if the stack is allocated in a new PGD (one that was not present at the
moment of the efi page table creation or not synced in a previous vmalloc
fault), the kernel will take a trap when switching to the efi page table
when the vmalloc kernel stack is accessed, resulting in a kernel panic.

Fix that by updating the efi kernel mappings before switching to the efi
page table.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Fixes: b91540d52a08 ("RISC-V: Add EFI runtime services")
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20221121133303.1782246-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: single: Fix potential division by zero

[ Upstream commit 64c150339e7f6c5cbbe8c17a56ef2b3902612798 ]

There is a possibility of dividing by zero due to the pcs->bits_per_pin
if pcs->fmask() also has a value of zero and called fls
from asm-generic/bitops/builtin-fls.h or arch/x86/include/asm/bitops.h.
The function pcs_probe() has the branch that assigned to fmask 0 before
pcs_allocate_pin_table() was called

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 4e7e8017a80e ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules")
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221117123034.27383-1-korotkov.maxim.s@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: ops: Fix bounds check for _sx controls

[ Upstream commit 698813ba8c580efb356ace8dbf55f61dac6063a8 ]

For _sx controls the semantics of the max field is not the usual one, max
is the number of steps rather than the maximum value. This means that our
check in snd_soc_put_volsw_sx() needs to just check against the maximum
value.

Fixes: 4f1e50d6a9cf9c1b ("ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx()")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220511134137.169575-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86/mmu: Fix race condition in direct_page_fault

commit 47b0c2e4c220f2251fd8dcfbb44479819c715e15 upstream.

make_mmu_pages_available() must be called with mmu_lock held for write.
However, if the TDP MMU is used, it will be called with mmu_lock held for
read.
This function does nothing unless shadow pages are used, so there is no
race unless nested TDP is used.
Since nested TDP uses shadow pages, old shadow pages may be zapped by this
function even when the TDP MMU is enabled.
Since shadow pages are never allocated by kvm_tdp_mmu_map(), a race
condition can be avoided by not calling make_mmu_pages_available() if the
TDP MMU is currently in use.

I encountered this when repeatedly starting and stopping nested VM.
It can be artificially caused by allocating a large number of nested TDP
SPTEs.

For example, the following BUG and general protection fault are caused in
the host kernel.

pte_list_remove: 00000000cd54fc10 many->many
------------[ cut here ]------------
kernel BUG at arch/x86/kvm/mmu/mmu.c:963!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:pte_list_remove.cold+0x16/0x48 [kvm]
Call Trace:
<TASK>
drop_spte+0xe0/0x180 [kvm]
mmu_page_zap_pte+0x4f/0x140 [kvm]
__kvm_mmu_prepare_zap_page+0x62/0x3e0 [kvm]
kvm_mmu_zap_oldest_mmu_pages+0x7d/0xf0 [kvm]
direct_page_fault+0x3cb/0x9b0 [kvm]
kvm_tdp_page_fault+0x2c/0xa0 [kvm]
kvm_mmu_page_fault+0x207/0x930 [kvm]
npf_interception+0x47/0xb0 [kvm_amd]
svm_invoke_exit_handler+0x13c/0x1a0 [kvm_amd]
svm_handle_exit+0xfc/0x2c0 [kvm_amd]
kvm_arch_vcpu_ioctl_run+0xa79/0x1780 [kvm]
kvm_vcpu_ioctl+0x29b/0x6f0 [kvm]
__x64_sys_ioctl+0x95/0xd0
do_syscall_64+0x5c/0x90

general protection fault, probably for non-canonical address
0xdead000000000122: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:kvm_mmu_commit_zap_page.part.0+0x4b/0xe0 [kvm]
Call Trace:
<TASK>
kvm_mmu_zap_oldest_mmu_pages+0xae/0xf0 [kvm]
direct_page_fault+0x3cb/0x9b0 [kvm]
kvm_tdp_page_fault+0x2c/0xa0 [kvm]
kvm_mmu_page_fault+0x207/0x930 [kvm]
npf_interception+0x47/0xb0 [kvm_amd]

CVE: CVE-2022-45869
Fixes: a2855afc7ee8 ("KVM: x86/mmu: Allow parallel page faults for the TDP MMU")
Signed-off-by: Kazuki Takiguchi <takiguchi.kazuki171@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring/poll: fix poll_refs race with cancelation

[ upstream commit 12ad3d2d6c5b0131a6052de91360849e3e154846 ]

There is an interesting race condition of poll_refs which could result
in a NULL pointer dereference. The crash trace is like:

KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 30781 Comm: syz-executor.2 Not tainted 6.0.0-g493ffd6605b2 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:io_poll_remove_entry io_uring/poll.c:154 [inline]
RIP: 0010:io_poll_remove_entries+0x171/0x5b4 io_uring/poll.c:190
Code: ...
RSP: 0018:ffff88810dfefba0 EFLAGS: 00010202
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000040000
RDX: ffffc900030c4000 RSI: 000000000003ffff RDI: 0000000000040000
RBP: 0000000000000008 R08: ffffffff9764d3dd R09: fffffbfff3836781
R10: fffffbfff3836781 R11: 0000000000000000 R12: 1ffff11003422d60
R13: ffff88801a116b04 R14: ffff88801a116ac0 R15: dffffc0000000000
FS:  00007f9c07497700(0000) GS:ffff88811a600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffb5c00ea98 CR3: 0000000105680005 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
io_apoll_task_func+0x3f/0xa0 io_uring/poll.c:299
handle_tw_list io_uring/io_uring.c:1037 [inline]
tctx_task_work+0x37e/0x4f0 io_uring/io_uring.c:1090
task_work_run+0x13a/0x1b0 kernel/task_work.c:177
get_signal+0x2402/0x25a0 kernel/signal.c:2635
arch_do_signal_or_restart+0x3b/0x660 arch/x86/kernel/signal.c:869
exit_to_user_mode_loop kernel/entry/common.c:166 [inline]
exit_to_user_mode_prepare+0xc2/0x160 kernel/entry/common.c:201
__syscall_exit_to_user_mode_work kernel/entry/common.c:283 [inline]
syscall_exit_to_user_mode+0x58/0x160 kernel/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x63/0xcd

The root cause for this is a tiny overlooking in
io_poll_check_events() when cocurrently run with poll cancel routine
io_poll_cancel_req().

The interleaving to trigger use-after-free:

CPU0                                       |  CPU1
                                           |
io_apoll_task_func()                       |  io_poll_cancel_req()
io_poll_check_events()                    |
  // do while first loop                   |
  v = atomic_read(...)                     |
  // v = poll_refs = 1                     |
  ...                                      |  io_poll_mark_cancelled()
                                           |   atomic_or()
                                           |   // poll_refs =
IO_POLL_CANCEL_FLAG | 1
                                           |
  atomic_sub_return(...)                   |
  // poll_refs = IO_POLL_CANCEL_FLAG       |
  // loop continue                         |
                                           |
                                           |  io_poll_execute()
                                           |   io_poll_get_ownership()
                                           |   // poll_refs =
IO_POLL_CANCEL_FLAG | 1
                                           |   // gets the ownership
  v = atomic_read(...)                     |
  // poll_refs not change                  |
                                           |
  if (v & IO_POLL_CANCEL_FLAG)             |
   return -ECANCELED;                      |
  // io_poll_check_events return           |
  // will go into                          |
  // io_req_complete_failed() free req     |
                                           |
                                           |  io_apoll_task_func()
                                           |  // also go into
io_req_complete_failed()

And the interleaving to trigger the kernel WARNING:

CPU0                                       |  CPU1
                                           |
io_apoll_task_func()                       |  io_poll_cancel_req()
io_poll_check_events()                    |
  // do while first loop                   |
  v = atomic_read(...)                     |
  // v = poll_refs = 1                     |
  ...                                      |  io_poll_mark_cancelled()
                                           |   atomic_or()
                                           |   // poll_refs =
IO_POLL_CANCEL_FLAG | 1
                                           |
  atomic_sub_return(...)                   |
  // poll_refs = IO_POLL_CANCEL_FLAG       |
  // loop continue                         |
                                           |
  v = atomic_read(...)                     |
  // v = IO_POLL_CANCEL_FLAG               |
                                           |  io_poll_execute()
                                           |   io_poll_get_ownership()
                                           |   // poll_refs =
IO_POLL_CANCEL_FLAG | 1
                                           |   // gets the ownership
                                           |
  WARN_ON_ONCE(!(v & IO_POLL_REF_MASK)))   |
  // v & IO_POLL_REF_MASK = 0 WARN         |
                                           |
                                           |  io_apoll_task_func()
                                           |  // also go into
io_req_complete_failed()

By looking up the source code and communicating with Pavel, the
implementation of this atomic poll refs should continue the loop of
io_poll_check_events() just to avoid somewhere else to grab the
ownership. Therefore, this patch simply adds another AND operation to
make sure the loop will stop if it finds the poll_refs is exactly equal
to IO_POLL_CANCEL_FLAG. Since io_poll_cancel_req() grabs ownership and
will finally make its way to io_req_complete_failed(), the req will
be reclaimed as expected.

Fixes: aa43477b0402 ("io_uring: poll rework")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: tweak description and code style]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: make poll refs more robust

[ upstream commit a26a35e9019fd70bf3cf647dcfdae87abc7bacea ]

poll_refs carry two functions, the first is ownership over the request.
The second is notifying the io_poll_check_events() that there was an
event but wake up couldn't grab the ownership, so io_poll_check_events()
should retry.

We want to make poll_refs more robust against overflows. Instead of
always incrementing it, which covers two purposes with one atomic, check
if poll_refs is elevated enough and if so set a retry flag without
attempts to grab ownership. The gap between the bias check and following
atomics may seem racy, but we don't need it to be strict. Moreover there
might only be maximum 4 parallel updates: by the first and the second
poll entries, __io_arm_poll_handler() and cancellation. From those four,
only poll wake ups may be executed multiple times, but they're protected
by a spin.

Cc: stable@vger.kernel.org
Reported-by: Lin Ma <linma@zju.edu.cn>
Fixes: aa43477b04025 ("io_uring: poll rework")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c762bc31f8683b3270f3587691348a7119ef9c9d.1668963050.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: cmpxchg for poll arm refs release

[ upstream commit 2f3893437a4ebf2e892ca172e9e122841319d675 ]

Replace atomically substracting the ownership reference at the end of
arming a poll with a cmpxchg. We try to release ownership by setting 0
assuming that poll_refs didn't change while we were arming. If it did
change, we keep the ownership and use it to queue a tw, which is fully
capable to process all events and (even tolerates spurious wake ups).

It's a bit more elegant as we reduce races b/w setting the cancellation
flag and getting refs with this release, and with that we don't have to
worry about any kinds of underflows. It's not the fastest path for
polling. The performance difference b/w cmpxchg and atomic dec is
usually negligible and it's not the fastest path.

Cc: stable@vger.kernel.org
Fixes: aa43477b04025 ("io_uring: poll rework")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0c95251624397ea6def568ff040cad2d7926fd51.1668963050.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: fix tw losing poll events

[ upstream commit 539bcb57da2f58886d7d5c17134236b0ec9cd15d ]

We may never try to process a poll wake and its mask if there was
multiple wake ups racing for queueing up a tw. Force
io_poll_check_events() to update the mask by vfs_poll().

Cc: stable@vger.kernel.org
Fixes: aa43477b04025 ("io_uring: poll rework")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/00344d60f8b18907171178d7cf598de71d127b0b.1668710222.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: update res mask in io_poll_check_events

[ upstream commit b98186aee22fa593bc8c6b2c5d839c2ee518bc8c ]

When io_poll_check_events() collides with someone attempting to queue a
task work, it'll spin for one more time. However, it'll continue to use
the mask from the first iteration instead of updating it. For example,
if the first wake up was a EPOLLIN and the second EPOLLOUT, the
userspace will not get EPOLLOUT in time.

Clear the mask for all subsequent iterations to force vfs_poll().

Cc: stable@vger.kernel.org
Fixes: aa43477b04025 ("io_uring: poll rework")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2dac97e8f691231049cb259c4ae57e79e40b537c.1668710222.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Free buffers when a used dynamic event is removed

commit 4313e5a613049dfc1819a6dfb5f94cf2caff9452 upstream.

After 65536 dynamic events have been added and removed, the "type" field
of the event then uses the first type number that is available (not
currently used by other events). A type number is the identifier of the
binary blobs in the tracing ring buffer (known as events) to map them to
logic that can parse the binary blob.

The issue is that if a dynamic event (like a kprobe event) is traced and
is in the ring buffer, and then that event is removed (because it is
dynamic, which means it can be created and destroyed), if another dynamic
event is created that has the same number that new event's logic on
parsing the binary blob will be used.

To show how this can be an issue, the following can crash the kernel:

# cd /sys/kernel/tracing
# for i in `seq 65536`; do
     echo 'p:kprobes/foo do_sys_openat2 $arg1:u32' > kprobe_events
# done

For every iteration of the above, the writing to the kprobe_events will
remove the old event and create a new one (with the same format) and
increase the type number to the next available on until the type number
reaches over 65535 which is the max number for the 16 bit type. After it
reaches that number, the logic to allocate a new number simply looks for
the next available number. When an dynamic event is removed, that number
is then available to be reused by the next dynamic event created. That is,
once the above reaches the max number, the number assigned to the event in
that loop will remain the same.

Now that means deleting one dynamic event and created another will reuse
the previous events type number. This is where bad things can happen.
After the above loop finishes, the kprobes/foo event which reads the
do_sys_openat2 function call's first parameter as an integer.

# echo 1 > kprobes/foo/enable
# cat /etc/passwd > /dev/null
# cat trace
             cat-2211    [005] ....  2007.849603: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196
             cat-2211    [005] ....  2007.849620: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196
             cat-2211    [005] ....  2007.849838: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196
             cat-2211    [005] ....  2007.849880: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196
# echo 0 > kprobes/foo/enable

Now if we delete the kprobe and create a new one that reads a string:

# echo 'p:kprobes/foo do_sys_openat2 +0($arg2):string' > kprobe_events

And now we can the trace:

# cat trace
        sendmail-1942    [002] .....   530.136320: foo: (do_sys_openat2+0x0/0x240) arg1=             cat-2046    [004] .....   530.930817: foo: (do_sys_openat2+0x0/0x240) arg1="��"
             cat-2046    [004] .....   530.930961: foo: (do_sys_openat2+0x0/0x240) arg1="��"
             cat-2046    [004] .....   530.934278: foo: (do_sys_openat2+0x0/0x240) arg1="��"
             cat-2046    [004] .....   530.934563: foo: (do_sys_openat2+0x0/0x240) arg1="��"
            bash-1515    [007] .....   534.299093: foo: (do_sys_openat2+0x0/0x240) arg1="kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk��@��4Z��;Y��U

And dmesg has:

==================================================================
BUG: KASAN: use-after-free in string+0xd4/0x1c0
Read of size 1 at addr ffff88805fdbbfa0 by task cat/2049

CPU: 0 PID: 2049 Comm: cat Not tainted 6.1.0-rc6-test+ #641
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
Call Trace:
  <TASK>
  dump_stack_lvl+0x5b/0x77
  print_report+0x17f/0x47b
  kasan_report+0xad/0x130
  string+0xd4/0x1c0
  vsnprintf+0x500/0x840
  seq_buf_vprintf+0x62/0xc0
  trace_seq_printf+0x10e/0x1e0
  print_type_string+0x90/0xa0
  print_kprobe_event+0x16b/0x290
  print_trace_line+0x451/0x8e0
  s_show+0x72/0x1f0
  seq_read_iter+0x58e/0x750
  seq_read+0x115/0x160
  vfs_read+0x11d/0x460
  ksys_read+0xa9/0x130
  do_syscall_64+0x3a/0x90
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fc2e972ade2
Code: c0 e9 b2 fe ff ff 50 48 8d 3d b2 3f 0a 00 e8 05 f0 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
RSP: 002b:00007ffc64e687c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fc2e972ade2
RDX: 0000000000020000 RSI: 00007fc2e980d000 RDI: 0000000000000003
RBP: 00007fc2e980d000 R08: 00007fc2e980c010 R09: 0000000000000000
R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000020f00
R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
  </TASK>

The buggy address belongs to the physical page:
page:ffffea00017f6ec0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5fdbb
flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000000 0000000000000000 ffffea00017f6ec8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff88805fdbbe80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  ffff88805fdbbf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff88805fdbbf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                                ^
  ffff88805fdbc000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  ffff88805fdbc080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================

This was found when Zheng Yejian sent a patch to convert the event type
number assignment to use IDA, which gives the next available number, and
this bug showed up in the fuzz testing by Yujie Liu and the kernel test
robot. But after further analysis, I found that this behavior is the same
as when the event type numbers go past the 16bit max (and the above shows
that).

As modules have a similar issue, but is dealt with by setting a
"WAS_ENABLED" flag when a module event is enabled, and when the module is
freed, if any of its events were enabled, the ring buffer that holds that
event is also cleared, to prevent reading stale events. The same can be
done for dynamic events.

If any dynamic event that is being removed was enabled, then make sure the
buffers they were enabled in are now cleared.

Link: https://lkml.kernel.org/r/20221123171434.545706e3@gandalf.local.home
Link: https://lore.kernel.org/all/20221110020319.1259291-1-zhengyejian1@huawei.com/
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Depends-on: e18eb8783ec49 ("tracing: Add tracing_reset_all_online_cpus_unlocked() function")
Depends-on: 5448d44c38557 ("tracing: Add unified dynamic event framework")
Depends-on: 6212dd29683ee ("tracing/kprobes: Use dyn_event framework for kprobe events")
Depends-on: 065e63f951432 ("tracing: Only have rmmod clear buffers that its events were active in")
Depends-on: 575380da8b469 ("tracing: Only clear trace buffer on module unload if event was traced")
Fixes: 77b44d1b7c283 ("tracing/kprobes: Rename Kprobe-tracer to kprobe-event")
Reported-by: Zheng Yejian <zhengyejian1@huawei.com>
Reported-by: Yujie Liu <yujie.liu@intel.com>
Reported-by: kernel test robot <yujie.liu@intel.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix race where histograms can be called before the event

commit ef38c79a522b660f7f71d45dad2d6244bc741841 upstream.

commit 94eedf3dded5 ("tracing: Fix race where eprobes can be called before
the event") fixed an issue where if an event is soft disabled, and the
trigger is being added, there's a small window where the event sees that
there's a trigger but does not see that it requires reading the event yet,
and then calls the trigger with the record == NULL.

This could be solved with adding memory barriers in the hot path, or to
make sure that all the triggers requiring a record check for NULL. The
latter was chosen.

Commit 94eedf3dded5 set the eprobe trigger handle to check for NULL, but
the same needs to be done with histograms.

Link: https://lore.kernel.org/linux-trace-kernel/20221118211809.701d40c0f8a757b0df3c025a@kernel.org/
Link: https://lore.kernel.org/linux-trace-kernel/20221123164323.03450c3a@gandalf.local.home
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 7491e2c442781 ("tracing: Add a probe that attaches to trace events")
Reported-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/osnoise: Fix duration type

commit 022632f6c43a86f2135642dccd5686de318e861d upstream.

The duration type is a 64 long value, not an int. This was
causing some long noise to report wrong values.

Change the duration to a 64 bits value.

Link: https://lkml.kernel.org/r/a93d8a8378c7973e9c609de05826533c9e977939.1668692096.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Fixes: bce29ac9ce0b ("trace: Add osnoise tracer")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Never return 0 if not all requests retired

commit 12b8b046e4c9de40fa59b6f067d6826f4e688f68 upstream.

Users of intel_gt_retire_requests_timeout() expect 0 return value on
success. However, we have no protection from passing back 0 potentially
returned by a call to dma_fence_wait_timeout() when it succedes right
after its timeout has expired.

Replace 0 with -ETIME before potentially using the timeout value as return
code, so -ETIME is returned if there are still some requests not retired
after timeout, 0 otherwise.

v3: Use conditional expression, more compact but also better reflecting
intention standing behind the change.

v2: Move the added lines down so flush_submission() is not affected.

Fixes: f33a8a51602c ("drm/i915: Merge wait_for_timelines with retire_request")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221121145655.75141-3-janusz.krzysztofik@linux.intel.com
(cherry picked from commit f301a29f143760ce8d3d6b6a8436d45d3448cde6)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix negative value passed as remaining time

commit a8899b8728013c7b2456f0bfa20e5fea85ee0fd1 upstream.

Commit b97060a99b01 ("drm/i915/guc: Update intel_gt_wait_for_idle to work
with GuC") extended the API of intel_gt_retire_requests_timeout() with an
extra argument 'remaining_timeout', intended for passing back unconsumed
portion of requested timeout when 0 (success) is returned. However, when
request retirement happens to succeed despite an error returned by a call
to dma_fence_wait_timeout(), that error code (a negative value) is passed
back instead of remaining time. If we then pass that negative value
forward as requested timeout to intel_uc_wait_for_idle(), an explicit BUG
will be triggered.

If request retirement succeeds but an error code is passed back via
remaininig_timeout, we may have no clue on how much of the initial timeout
might have been left for spending it on waiting for GuC to become idle.
OTOH, since all pending requests have been successfully retired, that
error code has been already ignored by intel_gt_retire_requests_timeout(),
then we shouldn't fail.

Assume no more time has been left on error and pass 0 timeout value to
intel_uc_wait_for_idle() to give it a chance to return success if GuC is
already idle.

v3: Don't fail on any error passed back via remaining_timeout.

v2: Fix the issue on the caller side, not the provider.

Fixes: b97060a99b01 ("drm/i915/guc: Update intel_gt_wait_for_idle to work with GuC")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: stable@vger.kernel.org # v5.15+
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221121145655.75141-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit f235dbd5b768e238d365fd05d92de5a32abc1c1f)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: enable Vangogh VCN indirect sram mode

commit 9a8cc8cabc1e351614fd7f9e774757a5143b6fe8 upstream.

So that uses PSP to initialize HW.

Fixes: 0c2c02b66c672e ("drm/amdgpu/vcn: add firmware support for dimgrey_cavefish")
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: temporarily disable broken Clang builds due to blown stack-frame

commit 6f6cb1714365a07dbc66851879538df9f6969288 upstream.

Patch series "Fix a bunch of allmodconfig errors", v2.

Since b339ec9c229aa ("kbuild: Only default to -Werror if COMPILE_TEST")
WERROR now defaults to COMPILE_TEST meaning that it's enabled for
allmodconfig builds.  This leads to some interesting build failures when
using Clang, each resolved in this set.

With this set applied, I am able to obtain a successful allmodconfig Arm
build.

This patch (of 2):

calculate_bandwidth() is presently broken on all !(X86_64 || SPARC64 ||
ARM64) architectures built with Clang (all released versions), whereby the
stack frame gets blown up to well over 5k.  This would cause an immediate
kernel panic on most architectures.  We'll revert this when the following
bug report has been resolved:
https://github.com/llvm/llvm-project/issues/41896.

Link: https://lkml.kernel.org/r/20221125120750.3537134-1-lee@kernel.org
Link: https://lkml.kernel.org/r/20221125120750.3537134-2-lee@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Lee Jones <lee@kernel.org>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci: Fix voltage switch delay

commit c981cdfb9925f64a364f13c2b4f98f877308a408 upstream.

Commit 20b92a30b561 ("mmc: sdhci: update signal voltage switch code")
removed voltage switch delays from sdhci because mmc core had been
enhanced to support them. However that assumed that sdhci_set_ios()
did a single clock change, which it did not, and so the delays in mmc
core, which should have come after the first clock change, were not
effective.

Fix by avoiding re-configuring UHS and preset settings when the clock
is turning on and the settings have not changed. That then also avoids
the associated clock changes, so that then sdhci_set_ios() does a single
clock change when voltage switching, and the mmc core delays become
effective.

To do that has meant keeping track of driver strength (host->drv_type),
and cases of reinitialization (host->reinit_uhs).

Note also, the 'turning_on_clk' restriction should not be necessary
but is done to minimize the impact of the change on stable kernels.

Fixes: 20b92a30b561 ("mmc: sdhci: update signal voltage switch code")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221128133259.38305-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-sprd: Fix no reset data and command after voltage switch

commit dd30dcfa7a74a06f8dcdab260d8d5adf32f17333 upstream.

After switching the voltage, no reset data and command will cause
CMD2 timeout.

Fixes: 29ca763fc26f ("mmc: sdhci-sprd: Add pin control support for voltage switch")
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221130121328.25553-1-wenchao.chen@unisoc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-esdhc-imx: correct CQHCI exit halt state check

commit a3cab1d2132474969871b5d7f915c5c0167b48b0 upstream.

With the current logic the "failed to exit halt state" error would be
shown even if any other bit than CQHCI_HALT was set in the CQHCI_CTL
register, since the right hand side is always true. Fix this by using
the correct operator (bit-wise instead of logical AND) to only check for
the halt bit flag, which was obviously intended here.

Fixes: 85236d2be844 ("mmc: sdhci-esdhc-imx: clear the HALT bit when enable CQE")
Signed-off-by: Sebastian Falbesoner <sebastian.falbesoner@gmail.com>
Acked-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221121105721.1903878-1-sebastian.falbesoner@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Fix ambiguous TRIM and DISCARD arg

commit 489d144563f23911262a652234b80c70c89c978b upstream.

Clean up the MMC_TRIM_ARGS define that became ambiguous with DISCARD
introduction. While at it, let's fix one usage where MMC_TRIM_ARGS falsely
included DISCARD too.

Fixes: b3bf915308ca ("mmc: core: new discard feature support at eMMC v4.5")
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/11376b5714964345908f3990f17e0701@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: mmc_test: Fix removal of debugfs file

commit f4307b4df1c28842bb1950ff0e1b97e17031b17f upstream.

In __mmc_test_register_dbgfs_file(), we need to assign 'file', as it's
being used when removing the debugfs files when the mmc_test module is
removed.

Fixes: a04c50aaa916 ("mmc: core: no need to check return value of debugfs_create functions")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
[Ulf: Re-wrote the commit msg]
Link: https://lore.kernel.org/r/20221123095506.1965691-1-yebin@huaweicloud.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: Set MAC's flow control register to reflect current settings

commit cc3d2b5fc0d6f8ad8a52da5ea679e5c2ec2adbd4 upstream.

Currently, pause frame register GMAC_RX_FLOW_CTRL_RFE is not updated
correctly when 'ethtool -A <IFACE> autoneg off rx off tx off' command
is issued. This fix ensures the flow control change is reflected directly
in the GMAC_RX_FLOW_CTRL_RFE register.

Fixes: 46f69ded988d ("net: stmmac: Use resolved link config in mac_link_up()")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Goh, Wei Sheng <wei.sheng.goh@intel.com>
Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

v4l2: don't fall back to follow_pfn() if pin_user_pages_fast() fails

commit 6647e76ab623b2b3fb2efe03a86e9c9046c52c33 upstream.

The V4L2_MEMORY_USERPTR interface is long deprecated and shouldn't be
used (and is discouraged for any modern v4l drivers).  And Seth Jenkins
points out that the fallback to VM_PFNMAP/VM_IO is fundamentally racy
and dangerous.

Note that it's not even a case that should trigger, since any normal
user pointer logic ends up just using the pin_user_pages_fast() call
that does the proper page reference counting.  That's not the problem
case, only if you try to use special device mappings do you have any
issues.

Normally I'd just remove this during the merge window, but since Seth
pointed out the problem cases, we really want to know as soon as
possible if there are actually any users of this odd special case of a
legacy interface.  Neither Hans nor Mauro seem to think that such
mis-uses of the old legacy interface should exist.  As Mauro says:

"See, V4L2 has actually 4 streaming APIs:
        - Kernel-allocated mmap (usually referred simply as just mmap);
        - USERPTR mmap;
        - read();
        - dmabuf;

  The USERPTR is one of the oldest way to use it, coming from V4L
  version 1 times, and by far the least used one"

And Hans chimed in on the USERPTR interface:

"To be honest, I wouldn't mind if it goes away completely, but that's a
  bit of a pipe dream right now"

but while removing this legacy interface entirely may be a pipe dream we
can at least try to remove the unlikely (and actively broken) case of
using special device mappings for USERPTR accesses.

This replaces it with a WARN_ONCE() that we can remove once we've
hopefully confirmed that no actual users exist.

NOTE! Longer term, this means that a 'struct frame_vector' only ever
contains proper page pointers, and all the games we have with converting
them to pages can go away (grep for 'frame_vector_to_pages()' and the
uses of 'vec->is_pfns').  But this is just the first step, to verify
that this code really is all dead, and do so as quickly as possible.

Reported-by: Seth Jenkins <sethjenkins@google.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: intel: Save and restore pins in "direct IRQ" mode

commit 6989ea4881c8944fbf04378418bb1af63d875ef8 upstream.

The firmware on some systems may configure GPIO pins to be
an interrupt source in so called "direct IRQ" mode. In such
cases the GPIO controller driver has no idea if those pins
are being used or not. At the same time, there is a known bug
in the firmwares that don't restore the pin settings correctly
after suspend, i.e. by an unknown reason the Rx value becomes
inverted.

Hence, let's save and restore the pins that are configured
as GPIOs in the input mode with GPIROUTIOXAPIC bit set.

Cc: stable@vger.kernel.org
Reported-and-tested-by: Dale Smith <dalepsmith@gmail.com>
Reported-and-tested-by: John Harris <jmharris@gmail.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214749
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20221124222926.72326-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/bugs: Make sure MSR_SPEC_CTRL is updated properly upon resume from S3

commit 66065157420c5b9b3f078f43d313c153e1ff7f83 upstream.

The "force" argument to write_spec_ctrl_current() is currently ambiguous
as it does not guarantee the MSR write. This is due to the optimization
that writes to the MSR happen only when the new value differs from the
cached value.

This is fine in most cases, but breaks for S3 resume when the cached MSR
value gets out of sync with the hardware MSR value due to S3 resetting
it.

When x86_spec_ctrl_current is same as x86_spec_ctrl_base, the MSR write
is skipped. Which results in SPEC_CTRL mitigations not getting restored.

Move the MSR write from write_spec_ctrl_current() to a new function that
unconditionally writes to the MSR. Update the callers accordingly and
rename functions.

[ bp: Rework a bit. ]

Fixes: caa0ff24d5d0 ("x86/bugs: Keep a per-CPU IA32_SPEC_CTRL value")
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/806d39b0bfec2fe8f50dc5446dff20f5bb24a959.1669821572.git.pawan.kumar.gupta@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry()

commit f0a0ccda18d6fd826d7c7e7ad48a6ed61c20f8b4 upstream.

Syzbot reported a null-ptr-deref bug:

NILFS (loop0): segctord starting. Construction interval = 5 seconds, CP
frequency < 30 seconds
general protection fault, probably for non-canonical address
0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 PID: 3603 Comm: segctord Not tainted
6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google
10/11/2022
RIP: 0010:nilfs_palloc_commit_free_entry+0xe5/0x6b0
fs/nilfs2/alloc.c:608
Code: 00 00 00 00 fc ff df 80 3c 02 00 0f 85 cd 05 00 00 48 b8 00 00 00
00 00 fc ff df 4c 8b 73 08 49 8d 7e 10 48 89 fa 48 c1 ea 03 <80> 3c 02
00 0f 85 26 05 00 00 49 8b 46 10 be a6 00 00 00 48 c7 c7
RSP: 0018:ffffc90003dff830 EFLAGS: 00010212
RAX: dffffc0000000000 RBX: ffff88802594e218 RCX: 000000000000000d
RDX: 0000000000000002 RSI: 0000000000002000 RDI: 0000000000000010
RBP: ffff888071880222 R08: 0000000000000005 R09: 000000000000003f
R10: 000000000000000d R11: 0000000000000000 R12: ffff888071880158
R13: ffff88802594e220 R14: 0000000000000000 R15: 0000000000000004
FS:  0000000000000000(0000) GS:ffff8880b9b00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb1c08316a8 CR3: 0000000018560000 CR4: 0000000000350ee0
Call Trace:
  <TASK>
  nilfs_dat_commit_free fs/nilfs2/dat.c:114 [inline]
  nilfs_dat_commit_end+0x464/0x5f0 fs/nilfs2/dat.c:193
  nilfs_dat_commit_update+0x26/0x40 fs/nilfs2/dat.c:236
  nilfs_btree_commit_update_v+0x87/0x4a0 fs/nilfs2/btree.c:1940
  nilfs_btree_commit_propagate_v fs/nilfs2/btree.c:2016 [inline]
  nilfs_btree_propagate_v fs/nilfs2/btree.c:2046 [inline]
  nilfs_btree_propagate+0xa00/0xd60 fs/nilfs2/btree.c:2088
  nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337
  nilfs_collect_file_data+0x45/0xd0 fs/nilfs2/segment.c:568
  nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1018
  nilfs_segctor_scan_file+0x3f4/0x6f0 fs/nilfs2/segment.c:1067
  nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1197 [inline]
  nilfs_segctor_collect fs/nilfs2/segment.c:1503 [inline]
  nilfs_segctor_do_construct+0x12fc/0x6af0 fs/nilfs2/segment.c:2045
  nilfs_segctor_construct+0x8e3/0xb30 fs/nilfs2/segment.c:2379
  nilfs_segctor_thread_construct fs/nilfs2/segment.c:2487 [inline]
  nilfs_segctor_thread+0x3c3/0xf30 fs/nilfs2/segment.c:2570
  kthread+0x2e4/0x3a0 kernel/kthread.c:376
  ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
  </TASK>
...

If DAT metadata file is corrupted on disk, there is a case where
req->pr_desc_bh is NULL and blocknr is 0 at nilfs_dat_commit_end() during
a b-tree operation that cascadingly updates ancestor nodes of the b-tree,
because nilfs_dat_commit_alloc() for a lower level block can initialize
the blocknr on the same DAT entry between nilfs_dat_prepare_end() and
nilfs_dat_commit_end().

If this happens, nilfs_dat_commit_end() calls nilfs_dat_commit_free()
without valid buffer heads in req->pr_desc_bh and req->pr_bitmap_bh, and
causes the NULL pointer dereference above in
nilfs_palloc_commit_free_entry() function, which leads to a crash.

Fix this by adding a NULL check on req->pr_desc_bh and req->pr_bitmap_bh
before nilfs_palloc_commit_free_entry() in nilfs_dat_commit_free().

This also calls nilfs_error() in that case to notify that there is a fatal
flaw in the filesystem metadata and prevent further operations.

Link: https://lkml.kernel.org/r/00000000000097c20205ebaea3d6@google.com
Link: https://lkml.kernel.org/r/20221114040441.1649940-1-zhangpeng362@huawei.com
Link: https://lkml.kernel.org/r/20221119120542.17204-1-konishi.ryusuke@gmail.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+ebe05ee8e98f755f61d0@syzkaller.appspotmail.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/vm/slabinfo-gnuplot: use "grep -E" instead of "egrep"

commit a435874bf626f55d7147026b059008c8de89fbb8 upstream.

The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:

egrep: warning: egrep is obsolescent; using grep -E

fix this up by moving the related file to use "grep -E" instead.

  sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/vm`

Here are the steps to install the latest grep:

  wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
  tar xf grep-3.8.tar.gz
  cd grep-3.8 && ./configure && make
  sudo make install
  export PATH=/usr/local/bin:$PATH

Link: https://lkml.kernel.org/r/1668825419-30584-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

error-injection: Add prompt for function error injection

commit a4412fdd49dc011bcc2c0d81ac4cab7457092650 upstream.

The config to be able to inject error codes into any function annotated
with ALLOW_ERROR_INJECTION() is enabled when FUNCTION_ERROR_INJECTION is
enabled.  But unfortunately, this is always enabled on x86 when KPROBES
is enabled, and there's no way to turn it off.

As kprobes is useful for observability of the kernel, it is useful to
have it enabled in production environments.  But error injection should
be avoided.  Add a prompt to the config to allow it to be disabled even
when kprobes is enabled, and get rid of the "def_bool y".

This is a kernel debug feature (it's in Kconfig.debug), and should have
never been something enabled by default.

Cc: stable@vger.kernel.org
Fixes: 540adea3809f6 ("error-injection: Separate error-injection from kprobe")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: dice: fix regression for Lexicon I-ONIX FW810S

commit 9b84f0f74d0d716e3fd18dc428ac111266ef5844 upstream.

For Lexicon I-ONIX FW810S, the call of ioctl(2) with
SNDRV_PCM_IOCTL_HW_PARAMS can returns -ETIMEDOUT. This is a regression due
to the commit 41319eb56e19 ("ALSA: dice: wait just for
NOTIFY_CLOCK_ACCEPTED after GLOBAL_CLOCK_SELECT operation"). The device
does not emit NOTIFY_CLOCK_ACCEPTED notification when accepting
GLOBAL_CLOCK_SELECT operation with the same parameters as current ones.

This commit fixes the regression. When receiving no notification, return
-ETIMEDOUT as long as operating for any change.

Fixes: 41319eb56e19 ("ALSA: dice: wait just for NOTIFY_CLOCK_ACCEPTED after GLOBAL_CLOCK_SELECT operation")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20221130130604.29774-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: mm: Proper page permissions after initmem free

commit 6fdd5d2f8c2f54b7fad4ff4df2a19542aeaf6102 upstream.

64-bit RISC-V kernels have the kernel image mapped separately to alias
the linear map. The linear map and the kernel image map are documented
as "direct mapping" and "kernel" respectively in [1].

At image load time, the linear map corresponding to the kernel image
is set to PAGE_READ permission, and the kernel image map is set to
PAGE_READ|PAGE_EXEC.

When the initmem is freed, the pages in the linear map should be
restored to PAGE_READ|PAGE_WRITE, whereas the corresponding pages in
the kernel image map should be restored to PAGE_READ, by removing the
PAGE_EXEC permission.

This is not the case. For 64-bit kernels, only the linear map is
restored to its proper page permissions at initmem free, and not the
kernel image map.

In practise this results in that the kernel can potentially jump to
dead __init code, and start executing invalid instructions, without
getting an exception.

Restore the freed initmem properly, by setting both the kernel image
map to the correct permissions.

[1] Documentation/riscv/vm-layout.rst

Fixes: e5c35fa04019 ("riscv: Map the kernel with correct permissions the first time")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Alexandre Ghiti <alex@ghiti.fr>
Link: https://lore.kernel.org/r/20221115090641.258476-1-bjorn@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: vdso: fix section overlapping under some conditions

commit 74f6bb55c834da6d4bac24f44868202743189b2b upstream.

lkp reported a build error, I tried the config and can reproduce
build error as below:

VDSOLD arch/riscv/kernel/vdso/vdso.so.dbg
ld.lld: error: section .note file range overlaps with .text
>>> .note range is [0x7C8, 0x803]
>>> .text range is [0x800, 0x1993]

ld.lld: error: section .text file range overlaps with .dynamic
>>> .text range is [0x800, 0x1993]
>>> .dynamic range is [0x808, 0x937]

ld.lld: error: section .note virtual address range overlaps with .text
>>> .note range is [0x7C8, 0x803]
>>> .text range is [0x800, 0x1993]

Fix it by setting DISABLE_BRANCH_PROFILING which will disable branch
tracing for vdso, thus avoid useless _ftrace_annotated_branch section
and _ftrace_branch section. Although we can also fix it by removing
the hardcoded .text begin address, but I think that's another story
and should be put into another patch.

Link: https://lore.kernel.org/lkml/202210122123.Cc4FPShJ-lkp@intel.com/#r
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20221102170254.1925-1-jszhang@kernel.org
Fixes: ad5d1122b82f ("riscv: use vDSO common flow to reduce the latency of the time-related functions")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (coretemp) fix pci device refcount leak in nv1a_ram_new()

[ Upstream commit 7dec14537c5906b8bf40fd6fd6d9c3850f8df11d ]

As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). So call it after using to avoid refcount leak.

Fixes: 14513ee696a0 ("hwmon: (coretemp) Use PCI host bridge ID to identify CPU if necessary")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221118093303.214163-1-yangyingliang@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (coretemp) Check for null before removing sysfs attrs

[ Upstream commit a89ff5f5cc64b9fe7a992cf56988fd36f56ca82a ]

If coretemp_add_core() gets an error then pdata->core_data[indx]
is already NULL and has been kfreed. Don't pass that to
sysfs_remove_group() as that will crash in sysfs_remove_group().

[Shortened for readability]
[91854.020159] sysfs: cannot create duplicate filename '/devices/platform/coretemp.0/hwmon/hwmon2/temp20_label'
<cpu offline>
[91855.126115] BUG: kernel NULL pointer dereference, address: 0000000000000188
[91855.165103] #PF: supervisor read access in kernel mode
[91855.194506] #PF: error_code(0x0000) - not-present page
[91855.224445] PGD 0 P4D 0
[91855.238508] Oops: 0000 [#1] PREEMPT SMP PTI
...
[91855.342716] RIP: 0010:sysfs_remove_group+0xc/0x80
...
[91855.796571] Call Trace:
[91855.810524]  coretemp_cpu_offline+0x12b/0x1dd [coretemp]
[91855.841738]  ? coretemp_cpu_online+0x180/0x180 [coretemp]
[91855.871107]  cpuhp_invoke_callback+0x105/0x4b0
[91855.893432]  cpuhp_thread_fun+0x8e/0x150
...

Fix this by checking for NULL first.

Signed-off-by: Phil Auld <pauld@redhat.com>
Cc: linux-hwmon@vger.kernel.org
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221117162313.3164803-1-pauld@redhat.com
Fixes: 199e0de7f5df3 ("hwmon: (coretemp) Merge pkgtemp with coretemp")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed

[ Upstream commit d66233a312ec9013af3e37e4030b479a20811ec3 ]

After system resumed on some environment board, the promiscuous mode
is disabled because the SoC turned off. So, call ravb_set_rx_mode() in
the ravb_resume() to fix the issue.

Reported-by: Tho Vu <tho.vu.wh@renesas.com>
Fixes: 0184165b2f42 ("ravb: add sleep PM suspend/resume support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20221128065604.1864391-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: fix memory leak in sctp_stream_outq_migrate()

[ Upstream commit 9ed7bfc79542119ac0a9e1ce8a2a5285e43433e9 ]

When sctp_stream_outq_migrate() is called to release stream out resources,
the memory pointed to by prio_head in stream out is not released.

The memory leak information is as follows:
unreferenced object 0xffff88801fe79f80 (size 64):
   comm "sctp_repo", pid 7957, jiffies 4294951704 (age 36.480s)
   hex dump (first 32 bytes):
     80 9f e7 1f 80 88 ff ff 80 9f e7 1f 80 88 ff ff  ................
     90 9f e7 1f 80 88 ff ff 90 9f e7 1f 80 88 ff ff  ................
   backtrace:
     [<ffffffff81b215c6>] kmalloc_trace+0x26/0x60
     [<ffffffff88ae517c>] sctp_sched_prio_set+0x4cc/0x770
     [<ffffffff88ad64f2>] sctp_stream_init_ext+0xd2/0x1b0
     [<ffffffff88aa2604>] sctp_sendmsg_to_asoc+0x1614/0x1a30
     [<ffffffff88ab7ff1>] sctp_sendmsg+0xda1/0x1ef0
     [<ffffffff87f765ed>] inet_sendmsg+0x9d/0xe0
     [<ffffffff8754b5b3>] sock_sendmsg+0xd3/0x120
     [<ffffffff8755446a>] __sys_sendto+0x23a/0x340
     [<ffffffff87554651>] __x64_sys_sendto+0xe1/0x1b0
     [<ffffffff89978b49>] do_syscall_64+0x39/0xb0
     [<ffffffff89a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Link: https://syzkaller.appspot.com/bug?exrid=29c402e56c4760763cc0
Fixes: 637784ade221 ("sctp: introduce priority based stream scheduler")
Reported-by: syzbot+29c402e56c4760763cc0@syzkaller.appspotmail.com
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20221126031720.378562-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE

[ Upstream commit b85f628aa158a653c006e9c1405a117baef8c868 ]

CHECKSUM_COMPLETE signals that skb->csum stores the sum over the
entire packet. It does not imply that an embedded l4 checksum
field has been validated.

Fixes: 682f048bd494 ("af_packet: pass checksum validation status to the user")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20221128161812.640098-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: tun: Fix use-after-free in tun_detach()

[ Upstream commit 5daadc86f27ea4d691e2131c04310d0418c6cd12 ]

syzbot reported use-after-free in tun_detach() [1]. This causes call
trace like below:

==================================================================
BUG: KASAN: use-after-free in notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75
Read of size 8 at addr ffff88807324e2a8 by task syz-executor.0/3673

CPU: 0 PID: 3673 Comm: syz-executor.0 Not tainted 6.1.0-rc5-syzkaller-00044-gcc675d22e422 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x15e/0x461 mm/kasan/report.c:395
kasan_report+0xbf/0x1f0 mm/kasan/report.c:495
notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75
call_netdevice_notifiers_info+0x86/0x130 net/core/dev.c:1942
call_netdevice_notifiers_extack net/core/dev.c:1983 [inline]
call_netdevice_notifiers net/core/dev.c:1997 [inline]
netdev_wait_allrefs_any net/core/dev.c:10237 [inline]
netdev_run_todo+0xbc6/0x1100 net/core/dev.c:10351
tun_detach drivers/net/tun.c:704 [inline]
tun_chr_close+0xe4/0x190 drivers/net/tun.c:3467
__fput+0x27c/0xa90 fs/file_table.c:320
task_work_run+0x16f/0x270 kernel/task_work.c:179
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0xb3d/0x2a30 kernel/exit.c:820
do_group_exit+0xd4/0x2a0 kernel/exit.c:950
get_signal+0x21b1/0x2440 kernel/signal.c:2858
arch_do_signal_or_restart+0x86/0x2300 arch/x86/kernel/signal.c:869
exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296
do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd

The cause of the issue is that sock_put() from __tun_detach() drops
last reference count for struct net, and then notifier_call_chain()
from netdev_state_change() accesses that struct net.

This patch fixes the issue by calling sock_put() from tun_detach()
after all necessary accesses for the struct net has done.

Fixes: 83c1f36f9880 ("tun: send netlink notification when the device is modified")
Reported-by: syzbot+106f9b687cd64ee70cd1@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=96eb7f1ce75ef933697f24eeab928c4a716edefe
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20221124175134.1589053-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Fix fileserver probe RTT handling

[ Upstream commit ca57f02295f188d6c65ec02202402979880fa6d8 ]

The fileserver probing code attempts to work out the best fileserver to
use for a volume by retrieving the RTT calculated by AF_RXRPC for the
probe call sent to each server and comparing them. Sometimes, however,
no RTT estimate is available and rxrpc_kernel_get_srtt() returns false,
leading good fileservers to be given an RTT of UINT_MAX and thus causing
the rotation algorithm to ignore them.

Fix afs_select_fileserver() to ignore rxrpc_kernel_get_srtt()'s return
value and just take the estimated RTT it provides - which will be capped
at 1 second.

Fixes: 1d4adfaf6574 ("rxrpc: Make rxrpc_kernel_get_srtt() indicate validity")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/166965503999.3392585.13954054113218099395.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mdiobus: fix unbalanced node reference count

[ Upstream commit cdde1560118f82498fc9e9a7c1ef7f0ef7755891 ]

I got the following report while doing device(mscc-miim) load test
with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled:

  OF: ERROR: memory leak, expected refcount 1 instead of 2,
  of_node_get()/of_node_put() unbalanced - destroy cset entry:
  attach overlay node /spi/soc@0/mdio@7107009c/ethernet-phy@0

If the 'fwnode' is not an acpi node, the refcount is get in
fwnode_mdiobus_phy_device_register(), but it has never been
put when the device is freed in the normal path. So call
fwnode_handle_put() in phy_device_release() to avoid leak.

If it's an acpi node, it has never been get, but it's put
in the error path, so call fwnode_handle_get() before
phy_device_register() to keep get/put operation balanced.

Fixes: bc1bee3b87ee ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221124150130.609420-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hsr: Fix potential use-after-free

[ Upstream commit 7e177d32442b7ed08a9fa61b61724abc548cb248 ]

The skb is delivered to netif_rx() which may free it, after calling this,
dereferencing skb may trigger use-after-free.

Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20221125075724.27912-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: re-fetch skb cb after tipc_msg_validate

[ Upstream commit 3067bc61fcfe3081bf4807ce65560f499e895e77 ]

As the call trace shows, the original skb was freed in tipc_msg_validate(),
and dereferencing the old skb cb would cause an use-after-free crash.

  BUG: KASAN: use-after-free in tipc_crypto_rcv_complete+0x1835/0x2240 [tipc]
  Call Trace:
   <IRQ>
   tipc_crypto_rcv_complete+0x1835/0x2240 [tipc]
   tipc_crypto_rcv+0xd32/0x1ec0 [tipc]
   tipc_rcv+0x744/0x1150 [tipc]
  ...
  Allocated by task 47078:
   kmem_cache_alloc_node+0x158/0x4d0
   __alloc_skb+0x1c1/0x270
   tipc_buf_acquire+0x1e/0xe0 [tipc]
   tipc_msg_create+0x33/0x1c0 [tipc]
   tipc_link_build_proto_msg+0x38a/0x2100 [tipc]
   tipc_link_timeout+0x8b8/0xef0 [tipc]
   tipc_node_timeout+0x2a1/0x960 [tipc]
   call_timer_fn+0x2d/0x1c0
  ...
  Freed by task 47078:
   tipc_msg_validate+0x7b/0x440 [tipc]
   tipc_crypto_rcv_complete+0x4b5/0x2240 [tipc]
   tipc_crypto_rcv+0xd32/0x1ec0 [tipc]
   tipc_rcv+0x744/0x1150 [tipc]

This patch fixes it by re-fetching the skb cb from the new allocated skb
after calling tipc_msg_validate().

Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/1b1cdba762915325bd8ef9a98d0276eb673df2a5.1669398403.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dsa: lan9303: Correct stat name

[ Upstream commit 39f59bca275d2d819a8788c0f962e9e89843efc9 ]

This patch changes the reported ethtool statistics for the lan9303
family of parts covered by this driver.

The TxUnderRun statistic label is renamed to RxShort to accurately
reflect what stat the device is reporting. I did not reorder the
statistics as that might cause problems with existing user code that
are expecting the stats at a certain offset.

Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221128193559.6572-1-jerry.ray@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: wwan: iosm: fix dma_alloc_coherent incompatible pointer type

[ Upstream commit 4a99e3c8ed888577b947cbed97d88c9706896105 ]

Fix build error reported on armhf while preparing 6.1-rc5
for Debian.

iosm_ipc_protocol.c:244:36: error: passing argument 3 of
'dma_alloc_coherent' from incompatible pointer type.

Change phy_ap_shm type from phys_addr_t to dma_addr_t.

Fixes: faed4c6f6f48 ("net: iosm: shared memory protocol")
Reported-by: Bonaccorso Salvatore <carnil@debian.org>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: wwan: iosm: fix kernel test robot reported error

[ Upstream commit 985a02e75881b73a43c9433a718b49d272a9dd6b ]

sparse warnings - iosm_ipc_mux_codec.c:1474 using plain
integer as NULL pointer.

Use skb_trim() to reset skb tail & len.

Fixes: 9413491e20e1 ("net: iosm: encode or decode datagram")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: nixge: fix NULL dereference

[ Upstream commit 9256db4e45e8b497b0e993cc3ed4ad08eb2389b6 ]

In function nixge_hw_dma_bd_release() dereference of NULL pointer
priv->rx_bd_v is possible for the case of its allocation failure in
nixge_hw_dma_bd_init().

Move for() loop with priv->rx_bd_v dereference under the check for
its validity.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 492caffa8a1a ("net: ethernet: nixge: Add support for National Instruments XGE netdev")
Signed-off-by: Yuri Karpov <YKarpov@ispras.ru>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/9p: Fix a potential socket leak in p9_socket_open

[ Upstream commit dcc14cfd7debe11b825cb077e75d91d2575b4cb8 ]

Both p9_fd_create_tcp() and p9_fd_create_unix() will call
p9_socket_open(). If the creation of p9_trans_fd fails,
p9_fd_create_tcp() and p9_fd_create_unix() will return an
error directly instead of releasing the cscoket, which will
result in a socket leak.

This patch adds sock_release() to fix the leak issue.

Fixes: 6b18662e239a ("9p connect fixes")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
ACKed-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: net_netdev: Fix error handling in ntb_netdev_init_module()

[ Upstream commit b8f79dccd38edf7db4911c353d9cd792ab13a327 ]

The ntb_netdev_init_module() returns the ntb_transport_register_client()
directly without checking its return value, if
ntb_transport_register_client() failed, the NTB client device is not
unregistered.

Fix by unregister NTB client device when ntb_transport_register_client()
failed.

Fixes: 548c237c0a99 ("net: Add support for NTB virtual ethernet device")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: ti: am65-cpsw: fix error handling in am65_cpsw_nuss_probe()

[ Upstream commit 46fb6512538d201d9a5b2bd7138b6751c37fdf0b ]

The am65_cpsw_nuss_cleanup_ndev() function calls unregister_netdev()
even if register_netdev() fails, which triggers WARN_ON(1) in
unregister_netdevice_many(). To fix it, make sure that
unregister_netdev() is called only on registered netdev.

Compile tested only.

Fixes: 84b4aa493249 ("net: ethernet: ti: am65-cpsw: add multi port support in mac-only mode")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: fix null-ptr-deref while probe() failed

[ Upstream commit 369eb2c9f1f72adbe91e0ea8efb130f0a2ba11a6 ]

I got a null-ptr-deref report as following when doing fault injection test:

BUG: kernel NULL pointer dereference, address: 0000000000000058
Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G    B            N 6.1.0-rc3+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:klist_put+0x2d/0xd0
Call Trace:
<TASK>
klist_remove+0xf1/0x1c0
device_release_driver_internal+0x23e/0x2d0
bus_remove_device+0x1bd/0x240
device_del+0x357/0x770
phy_device_remove+0x11/0x30
mdiobus_unregister+0xa5/0x140
release_nodes+0x6a/0xa0
devres_release_all+0xf8/0x150
device_unbind_cleanup+0x19/0xd0

//probe path:
phy_device_register()
  device_add()

phy_connect
  phy_attach_direct() //set device driver
    probe() //it's failed, driver is not bound
    device_bind_driver() // probe failed, it's not called

//remove path:
phy_device_remove()
  device_del()
    device_release_driver_internal()
      __device_release_driver() //dev->drv is not NULL
        klist_remove() <- knode_driver is not added yet, cause null-ptr-deref

In phy_attach_direct(), after setting the 'dev->driver', probe() fails,
device_bind_driver() is not called, so the knode_driver->n_klist is not
set, then it causes null-ptr-deref in __device_release_driver() while
deleting device. Fix this by setting dev->driver to NULL in the error
path in phy_attach_direct().

Fixes: e13934563db0 ("[PATCH] PHY Layer fixup")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac8021: fix possible oob access in ieee80211_get_rate_duration

[ Upstream commit 3e8f7abcc3473bc9603323803aeaed4ffcc3a2ab ]

Fix possible out-of-bound access in ieee80211_get_rate_duration routine
as reported by the following UBSAN report:

UBSAN: array-index-out-of-bounds in net/mac80211/airtime.c:455:47
index 15 is out of range for type 'u16 [12]'
CPU: 2 PID: 217 Comm: kworker/u32:10 Not tainted 6.1.0-060100rc3-generic
Hardware name: Acer Aspire TC-281/Aspire TC-281, BIOS R01-A2 07/18/2017
Workqueue: mt76 mt76u_tx_status_data [mt76_usb]
Call Trace:
<TASK>
show_stack+0x4e/0x61
dump_stack_lvl+0x4a/0x6f
dump_stack+0x10/0x18
ubsan_epilogue+0x9/0x43
__ubsan_handle_out_of_bounds.cold+0x42/0x47
ieee80211_get_rate_duration.constprop.0+0x22f/0x2a0 [mac80211]
? ieee80211_tx_status_ext+0x32e/0x640 [mac80211]
ieee80211_calc_rx_airtime+0xda/0x120 [mac80211]
ieee80211_calc_tx_airtime+0xb4/0x100 [mac80211]
mt76x02_send_tx_status+0x266/0x480 [mt76x02_lib]
mt76x02_tx_status_data+0x52/0x80 [mt76x02_lib]
mt76u_tx_status_data+0x67/0xd0 [mt76_usb]
process_one_work+0x225/0x400
worker_thread+0x50/0x3e0
? process_one_work+0x400/0x400
kthread+0xe9/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30

Fixes: db3e1c40cf2f ("mac80211: Import airtime calculation code from mt76")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211: don't allow multi-BSSID in S1G

[ Upstream commit acd3c92acc7aaec50a94d0a7faf7ccd74e952493 ]

In S1G beacon frames there shouldn't be multi-BSSID elements
since that's not supported, remove that to avoid a potential
integer underflow and/or misparsing the frames due to the
different length of the fixed part of the frame.

While at it, initialize non_tx_data so we don't send garbage
values to the user (even if it doesn't seem to matter now.)

Reported-and-tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 9eaffe5078ca ("cfg80211: convert S1G beacon to scan results")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211: fix buffer overflow in elem comparison

[ Upstream commit 9f16b5c82a025cd4c864737409234ddc44fb166a ]

For vendor elements, the code here assumes that 5 octets
are present without checking. Since the element itself is
already checked to fit, we only need to check the length.

Reported-and-tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>