Markus Klotzbuecher [Wed, 6 Jun 2007 09:49:43 +0000 (11:49 +0200)]
USB: ohci fixes and cleanup for ppc4xx and yosemite board.
Markus Klotzbuecher [Wed, 6 Jun 2007 09:49:43 +0000 (11:49 +0200)]
USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
Markus Klotzbuecher [Wed, 6 Jun 2007 09:49:35 +0000 (11:49 +0200)]
USB/OHCI: endianness cleanup in the generic ohci driver
Rodolfo Giometti [Wed, 6 Jun 2007 08:08:14 +0000 (10:08 +0200)]
Files include/linux/byteorder/{big,little}_endian.h define
__BIG_ENDIAN and __LITTLE_ENDIAN.
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Zhang Wei [Wed, 6 Jun 2007 08:08:14 +0000 (10:08 +0200)]
Add USB PCI-OHCI, USB keyboard and event poll support to the
MPC8641HPCN board config file.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Zhang Wei [Wed, 6 Jun 2007 08:08:14 +0000 (10:08 +0200)]
USB PCI-OHCI, interrupt pipe and usb event poll support
This patch added USB PCI-OHCI chips support, interrupt pipe support
and usb event poll support. For supporting the USB interrupt pipe, the
globe urb_priv is moved to purb in ed struct. Now, we can process
several urbs at one time. The interrupt pipe support codes are ported
from Linux kernel 2.4.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Zhang Wei [Wed, 6 Jun 2007 08:08:13 +0000 (10:08 +0200)]
USB event poll support
This patch adds USB event poll support, which could be used in usbkbd
and other usb devices driver when the asynchronous interrupt
processing is supported.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com
Rodolfo Giometti [Wed, 6 Jun 2007 08:08:12 +0000 (10:08 +0200)]
ISP116x: delay for crappy USB keys
Using some (very) slow USB keys cause the USB host controller buffers
are not ready to be read by the CPU so we need an extra delay before
reading the USB storage data.
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Markus Klotzbuecher [Wed, 6 Jun 2007 08:08:12 +0000 (10:08 +0200)]
Change duplicate usb_cpu_init_fail to usb_board_init_fail
Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
this out.
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
Markus Klotzbuecher [Tue, 29 May 2007 14:37:57 +0000 (16:37 +0200)]
Merge git://denx.de/git/u-boot into 2007_05_15-testing
Wolfgang Denk [Sun, 27 May 2007 23:11:11 +0000 (01:11 +0200)]
Merge with /home/tur/git/u-boot#motionpro
Bartlomiej Sieka [Sun, 27 May 2007 15:26:46 +0000 (17:26 +0200)]
Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 15:06:36 +0000 (17:06 +0200)]
Motion-PRO: Add support for redundant environment.
Enable redundant environment, add a MTD partition for it; also add env.
variable command for passing MTD partitions to the kernel command line.
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 15:05:11 +0000 (17:05 +0200)]
Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
Allow passing longer command line to the kernel - useful especially
for passing MTD partition layout.
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 15:04:18 +0000 (17:04 +0200)]
Fix: Add missing NULL termination in strings expanded by macros parser.
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 15:03:37 +0000 (17:03 +0200)]
Motion-PRO: Update EEPROM's page write bits and write delay.
Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
have a page write capability of two bytes", and "This device offers fast (1ms)
byte write". Add 3ms of extra delay.
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 14:58:45 +0000 (16:58 +0200)]
MPC5XXX, Motion-PRO: Fix PHY initialization problem.
After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
networking does not function. This commit switches PHY to TX mode by clearing
the FX_SEL bit of Mode Control Register. It also reverses commit
008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 14:57:15 +0000 (16:57 +0200)]
Motion-PRO: Add support for the temperature sensor.
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 14:55:23 +0000 (16:55 +0200)]
Motion-PRO: Add displaying of CPLD revision information during boot.
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 14:53:43 +0000 (16:53 +0200)]
MPC5xxx: Change names of defines related to IPB and PCI clocks.
Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
them does not cause PCI or IPB clocks to run at the specified speed.
Instead, they configure divisors used to calculate said clocks. This
patch renames the defines according to their real function.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 14:51:48 +0000 (16:51 +0200)]
Motion-PRO: Add LED support.
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Stefan Roese [Thu, 24 May 2007 07:50:17 +0000 (09:50 +0200)]
Merge with /home/stefan/git/u-boot/acadia-nand
Stefan Roese [Thu, 24 May 2007 07:49:00 +0000 (09:49 +0200)]
ppc4xx: Fix small 405EZ OCM initilization bug in start.S
As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
fixes a small bug in the 405EZ OCM initialization. Thanks for
spotting.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Thu, 24 May 2007 06:22:09 +0000 (08:22 +0200)]
ppc4xx: Update AMCC Acadia support for board revision 1.1
This patch updates the Acadia (405EZ) support for the new 1.1 board
revision. It also adds support for NAND FLASH via the 4xx NDFC.
Please note that the jumper J7 must be in position 2-3 for this
NAND support. Position 1-2 is for NAND booting only. NAND booting
support will follow later.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 22 May 2007 10:48:09 +0000 (12:48 +0200)]
ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 22 May 2007 10:46:10 +0000 (12:46 +0200)]
ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
This patch adds support for 405 PPC's to the 4xx NAND driver
ndfc.c. This is in preparation for the new AMCC 405EZ.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Mon, 21 May 2007 05:41:22 +0000 (07:41 +0200)]
ppc4xx: Fix problem in 405EZ OCM initialization
As spotted by Bruce Adler this patch fixes an initialization problem
for the 405EZ OCM.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 18 May 2007 09:20:02 +0000 (11:20 +0200)]
Merge with git://www.denx.de/git/u-boot.git
Stefano Babic [Wed, 16 May 2007 12:49:12 +0000 (14:49 +0200)]
Fix compile problem cause my Microblaze merge
Signed-off-by: Stefano Babic <sbabic@denx.de>
Jeffrey Mann [Wed, 16 May 2007 11:23:10 +0000 (13:23 +0200)]
[PATCH] Run new sequoia boards with an EBC speed of 83MHz
Because the Sequoia board does not boot with an EBC faster than 66MHz,
the clock divider are changed after the initial boot process.
This allows for maximum clocking speeds to be achieved on newer boards.
Sequoia boards with 666.66 MHz processors require that the EBC divider
be set to 3 in order to start the initial boot process at a slower EBC
speed. After the initial boot process, the divider can be set back to 2,
which will cause the boards to run at 83.333MHz. This is backward
compatible with boards with 533.33 MHz processors, as these boards will
already be set with an EBC divider of 2.
Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
Wolfgang Denk [Tue, 15 May 2007 23:16:53 +0000 (01:16 +0200)]
Minor Coding Style cleanup, update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Tue, 15 May 2007 23:12:04 +0000 (01:12 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-mpc83xx
Wolfgang Denk [Tue, 15 May 2007 22:13:33 +0000 (00:13 +0200)]
Coding Style Cleanup, new CHANGELOG
Wolfgang Denk [Tue, 15 May 2007 22:11:53 +0000 (00:11 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-microblaze
Wolfgang Denk [Mon, 14 May 2007 22:23:53 +0000 (00:23 +0200)]
Merge with /home/wd/git/u-boot/master
Wolfgang Denk [Mon, 14 May 2007 22:22:30 +0000 (00:22 +0200)]
Merge with /home/tur/git/u-boot#motionpro
Stefan Roese [Fri, 11 May 2007 10:01:49 +0000 (12:01 +0200)]
ppc4xx: Add mtcpr/mfcpr access macros
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 11 May 2007 10:01:06 +0000 (12:01 +0200)]
ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
Signed-off-by: Stefan Roese <sr@denx.de>
Piotr Kruszynski [Thu, 10 May 2007 14:55:52 +0000 (16:55 +0200)]
[Motion-PRO] Add MTD and JFFS2 support, also add default partition
definition.
Michal Simek [Tue, 8 May 2007 13:57:43 +0000 (15:57 +0200)]
add: reading special purpose registers
Michal Simek [Tue, 8 May 2007 12:52:52 +0000 (14:52 +0200)]
add: Microblaze V5 exception handling
Michal Simek [Tue, 8 May 2007 12:39:11 +0000 (14:39 +0200)]
add: FSL control read and write
Piotr Kruszynski [Tue, 8 May 2007 11:05:44 +0000 (13:05 +0200)]
[Motion-PRO] Add support for I2C, EEPROM and RTC.
Bartlomiej Sieka [Tue, 8 May 2007 08:23:56 +0000 (10:23 +0200)]
[Motion-PRO] Add ATA support. Add CF-booting commands to the default
environment.
Bartlomiej Sieka [Tue, 8 May 2007 07:39:12 +0000 (09:39 +0200)]
[Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
eliminates networking problems in Linux (timeouts).
Bartlomiej Sieka [Tue, 8 May 2007 07:21:57 +0000 (09:21 +0200)]
[Motion-PRO] Enable Flat Device Tree support and modify default environment
to allow booting of FDT-expecting kernels.
Michal Simek [Mon, 7 May 2007 22:32:35 +0000 (00:32 +0200)]
Merge git://www.denx.de/git/u-boot
Conflicts:
include/asm-microblaze/microblaze_intc.h
include/linux/stat.h
Michal Simek [Mon, 7 May 2007 21:58:31 +0000 (23:58 +0200)]
new: USE_MSR_INTR support
Bartlomiej Sieka [Mon, 7 May 2007 20:36:15 +0000 (22:36 +0200)]
[MPC5xxx] There are networking problems on the Motion-PRO board with
current PHY initalization code (tftp timeouts all the time). This commit
temporarily disables PHY initalization sequence to make the networking
operational, until a fix is found.
Wolfgang Denk [Mon, 7 May 2007 20:10:36 +0000 (22:10 +0200)]
Get rid of duplicated file (see include/configs/sbc8560.h instead)
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 7 May 2007 20:07:08 +0000 (22:07 +0200)]
Get rid of duplicated file (see doc/README.SBC8560 instead)
Signed-off-by: Wolfgang Denk <wd@denx.de>
Michal Simek [Mon, 7 May 2007 17:43:10 +0000 (19:43 +0200)]
fix: read and write MSR - repair number of parameters
Jeffrey Mann [Mon, 7 May 2007 17:42:49 +0000 (19:42 +0200)]
[PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
A '3' got cut off in the formatting of the last patch to automatically
change the clock speed of the system clock on sequoia board.
Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Michal Simek [Mon, 7 May 2007 17:33:51 +0000 (19:33 +0200)]
new: fsl interrupt support
FSL_Has_data is connected to INTC.
Michal Simek [Mon, 7 May 2007 17:30:12 +0000 (19:30 +0200)]
fix: interrupt handler
remove asm code
Michal Simek [Mon, 7 May 2007 17:25:08 +0000 (19:25 +0200)]
fix: remove asm code
Michal Simek [Mon, 7 May 2007 17:12:43 +0000 (19:12 +0200)]
fix: clean interrupt
Michal Simek [Mon, 7 May 2007 15:22:25 +0000 (17:22 +0200)]
fix: interrupt handler for multiple sources
Michal Simek [Mon, 7 May 2007 15:11:09 +0000 (17:11 +0200)]
new: add writing to msr register
Markus Klotzbuecher [Mon, 7 May 2007 14:43:56 +0000 (16:43 +0200)]
Fix an ancient CHANGELOG conflict
Markus Klotzbuecher [Mon, 7 May 2007 12:10:38 +0000 (14:10 +0200)]
Merge with git://www.denx.de/git/u-boot.git
Timur Tabi [Sat, 5 May 2007 06:12:30 +0000 (08:12 +0200)]
5xxx: write MAC address to mac-address and local-mac-address
Some device trees have a mac-address property, some have local-mac-address,
and some have both. To support all of these device trees, ftp_cpu_setup()
should write the MAC address to mac-address and local-mac-address, if they
exist.
Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Grzegorz Wianecki [Sun, 29 Apr 2007 12:01:54 +0000 (14:01 +0200)]
[PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
message. Use PVR to distinguish between the two variants, and print proper CPU
information.
Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Ladislav Michl [Wed, 25 Apr 2007 14:01:26 +0000 (16:01 +0200)]
[PATCH] simplify silent console
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Stefan Roese <sr@denx.de>
Sergei Shtylyov [Mon, 23 Apr 2007 13:30:39 +0000 (15:30 +0200)]
[PATCH] Avoid assigning PCI resources from zero address
If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
core complains and IDE drivers fails to work. Also, assigning zero to a BAR
was illegal according to PCI 2.1 (the later revisions seem to have excluded the
sentence about "0" being considered an invalid address) -- so, use a reasonable
starting value of 0x1000 (that's what the most Linux archs are using).
Alternatively, one might have fixed the calls to pci_set_region() individually
(some code even seems to have taken care of this issue) but that would have
been a lot more work. :-)
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Stefan Roese <sr@denx.de>
Jeffrey Mann [Mon, 23 Apr 2007 12:00:11 +0000 (14:00 +0200)]
[patch] setenv(...) can delete environmentalvariables
update setenv() function so that entering a NULL value for the
variable's value will delete the environmental variable
Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
Acked-by: Stefan Roese <sr@denx.de>
Mike Frysinger [Mon, 23 Apr 2007 11:54:24 +0000 (13:54 +0200)]
[patch] use unsigned char in smc91111 driver for mac
the v_mac variable in the smc91111 driver is declared as a signed char ...
this causes problems when one of the bytes in the MAC is "signed" like 0xE0
because when it gets printed out, you get a display like:
0xFFFFFFE0 and that's no good
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Michal Simek [Sat, 5 May 2007 16:54:42 +0000 (18:54 +0200)]
new: FSL and MSR support #2
Michal Simek [Sat, 5 May 2007 16:27:16 +0000 (18:27 +0200)]
new: FSL and MSR support
Wolfgang Denk [Sat, 5 May 2007 16:23:11 +0000 (18:23 +0200)]
Coding stylke cleanup; update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sat, 5 May 2007 16:07:10 +0000 (18:07 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-ppc4xx
Wolfgang Denk [Sat, 5 May 2007 16:05:02 +0000 (18:05 +0200)]
Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sat, 5 May 2007 15:33:22 +0000 (17:33 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-mpc85xx
Wolfgang Denk [Sat, 5 May 2007 15:15:50 +0000 (17:15 +0200)]
Make "file" command happy with some config.mk files; update CHANGELOG
Wolfgang Denk [Sat, 5 May 2007 14:57:46 +0000 (16:57 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-nand-flash
Wolfgang Denk [Sat, 5 May 2007 14:48:48 +0000 (16:48 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-mpc86xx
Stefan Roese [Sat, 5 May 2007 06:37:54 +0000 (08:37 +0200)]
Merge with git://www.denx.de/git/u-boot.git
Jeffrey Mann [Sat, 5 May 2007 06:32:14 +0000 (08:32 +0200)]
ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
The AMCC Secquoia board has been changed in a new revision from using a
33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
indicates the difference. This patch reads that bit and uses the correct
clock speed for the board. This code is backward compatable will all
prior boards. All prior boards will be read as 33.000.
Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Sat, 5 May 2007 06:29:01 +0000 (08:29 +0200)]
ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
for the 4k NAND boot image so define bus_frequency to 133MHz here
which is save for the refresh counter setup.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Sat, 5 May 2007 05:10:03 +0000 (07:10 +0200)]
Merge with git://www.denx.de/git/u-boot.git
Thomas Knobloch [Sat, 5 May 2007 05:04:42 +0000 (07:04 +0200)]
NAND: Wrong calculation of page number in nand_block_bad()
In case that there is no memory based bad block table available the
function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
nand_block_bad() directly. When parameter 'getchip' is set to zero,
nand_block_bad() will not right shift the offset to calculate the
correct page number.
Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Fri, 4 May 2007 08:02:33 +0000 (10:02 +0200)]
Fix initrd length corruption in bootm command.
When using FDT Images, the length of an inital ramdisk was
overwritten (bug introduced by commit
87a449c8, 22 Aug 2006).
Patches by Timur Tabi & Johns Daniel.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Kim Phillips [Fri, 4 May 2007 00:43:52 +0000 (19:43 -0500)]
mpc83xx: fix trivial error in MAKEALL
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Wolfgang Denk [Thu, 3 May 2007 14:34:41 +0000 (16:34 +0200)]
Update board configuration for STX GP3SSA board:
Enable hush shell, environment in flash rather in EEPROM,
more user-friendly default environment, etc.
The simple EEPROM environment can be selected easily in the board
config file.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Tue, 24 Apr 2007 12:37:49 +0000 (14:37 +0200)]
Cleanup STX GP3SSA code; fix build and compile problems.
Dan Malek [Fri, 5 Jan 2007 08:15:34 +0000 (09:15 +0100)]
Add support for STX GP3SSA (stxssa) Board
Signed-off-by Dan Malek, <dan@embeddedalley.com>
Andy Fleming [Sat, 24 Feb 2007 07:08:13 +0000 (01:08 -0600)]
Cleaned up some 85xx PCI bugs
* Cleaned up the CDS PCI Config Tables and added NULL entries to
the end
* Fixed PCIe LAWBAR assignemt to use the cpu-relative address
* Fixed 85xx PCI code to assign powar region sizes based on the
config values (rather than hard-coding them)
* Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
Signed-off-by: Andy Fleming <afleming@freescale.com>
Andy Fleming [Mon, 23 Apr 2007 07:54:25 +0000 (02:54 -0500)]
Add support for the 8568 MDS board
This included some changes to common files:
* Add 8568 processor SVR to various places
* Add support for setting the qe bus-frequency value in the dts
* Add the 8568MDS target to the Makefile
Signed-off-by: Andy Fleming <afleming@freescale.com>
David Updegraff [Fri, 20 Apr 2007 19:34:48 +0000 (14:34 -0500)]
Add support for treating unknown PHYs as generic PHYs.
When bringing up u-boot on new boards, PHY support sometimes gets
neglected. Most PHYs don't really need any special support,
though. By adding a generic entry that always matches if nothing
else does, we can provide support for "unsupported" PHYs for the
tsec.
The generic PHY driver supports most PHYs, including gigabit.
Signed-off-by: David Updegraff <dave@cray.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
James Yang [Wed, 7 Feb 2007 21:28:04 +0000 (15:28 -0600)]
Conditionalize 8641 Rev1.0 MCM workarounds
Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Timur Tabi [Mon, 30 Apr 2007 18:59:50 +0000 (13:59 -0500)]
Fix memory initialization on MPC8349E-mITX
Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
on some ITX boards, notably those with a revision 3.1 CPU.
Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Michael Benedict <MBenedict@twacs.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kim Phillips [Mon, 30 Apr 2007 20:26:21 +0000 (15:26 -0500)]
mpc83xx: replace elaborate boottime verbosity with 'clocks' command
and fix CPU: to align with Board: display text.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
James Yang [Fri, 16 Mar 2007 18:02:53 +0000 (13:02 -0500)]
Rewrote picos_to_clk() to avoid rounding errors.
Clarified that conversion is to DRAM clocks rather than platform clocks.
Made function static to spd_sdram.c.
Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Stefan Roese [Sun, 29 Apr 2007 14:40:31 +0000 (16:40 +0200)]
Merge with git://www.denx.de/git/u-boot.git
Stefan Roese [Sun, 29 Apr 2007 14:34:10 +0000 (16:34 +0200)]
Merge with /home/stefan/git/u-boot/u-boot-ppc4xx
Stefan Roese [Sun, 29 Apr 2007 12:13:01 +0000 (14:13 +0200)]
ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
Signed-off-by: Stefan Roese <sr@denx.de>
Kim Phillips [Wed, 25 Apr 2007 17:34:38 +0000 (12:34 -0500)]
mpc83xx: minor fixups for 8313rdb introduction
Michal Simek [Tue, 24 Apr 2007 21:01:02 +0000 (23:01 +0200)]
[PATCH] MTD partition support, JFFS2 support
Matthias Fuchs [Tue, 24 Apr 2007 12:03:45 +0000 (14:03 +0200)]
ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Andy Fleming [Mon, 23 Apr 2007 07:37:47 +0000 (02:37 -0500)]
Reworked 85xx speed detection code
Changed the code to read the registers and calculate the clock
rates, rather than using a "switch" statement.
Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>