hmp-commands-info: move info_cmds content out of monitor.c

For moving target- and device-specific code  from monitor.c,
to beginning we move info_cmds content to hmp-commands-info.hx

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-2-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

i386/kvm: Hyper-v crash msrs set/get'ers and migration

KVM Hyper-V based guests can notify hypervisor about
occurred guest crash by writing into Hyper-V crash MSR's.
This patch does handling and migration of HV_X64_MSR_CRASH_P0-P4,
HV_X64_MSR_CRASH_CTL msrs. User can enable these MSR's by
'hv-crash' option.

Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1435924905-8926-13-git-send-email-den@openvz.org>
[Folks, stop abrviating variable names!!! Also fix compilation on
 non-Linux/x86. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: Add kvm system event crash handler

KVM kernel can send guest crash events into userspace.
Appropriate guest crash handler is called when kernel guest
crash event received. Guest crash event recognized by a
KVM_SYSTEM_EVENT_CRASH type of system event.

Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1435924905-8926-11-git-send-email-den@openvz.org>
[Rebase: add lock/unlock iothread around qemu_system_guest_panicked - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

cpu: Add crash_occurred flag into CPUState

CPUState::crash_occurred field inside CPUState marks
that guest crash occurred. This value is added into
cpu common migration subsection.

Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1435924905-8926-12-git-send-email-den@openvz.org>
[Document the new field. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target-i386: move asm-x86/hyperv.h to standard-headers

The Hyper-V definitions are an industry standard and can be used
from code that is not KVM-specific.

Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

update-linux-headers: copy standard-headers files one by one

cp_virtio is called for both the asm-s390/ and linux/ directories,
so it looks for pci_regs.h and input.h files in asm-s390/ too.  This
makes little sense.  In the next patch we will have the opposite
problem; we want to add asm-x86/hyperv.h, and there's also a
linux/hyperv.h file with unwanted dependencies on additional Linux
uapi headers.  We do not want to copy linux/hyperv.h.

The solution is to make cp_virtio (now renamed to cp_portable) copy
one file only, instead of using the "find" command, and call it multiple
times.  The new function is really just a reindentation of the old one.

Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

update Linux headers to 4.3-rc1

The update to 4.2 was reviewed by Michael S. Tsirkin and Cornelia
Huck.  The further update to 4.3-rc1 only touches KVM files.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

pci: remove Link Training error from AER error list

The spec says:

    Undefined – The value read from this bit is
    undefined. In previous versions of this
    specification, this bit was used to indicate a Link
    Training Error. System software must ignore the
    value read from this bit. System software is
    permitted to write any value to this bit.

Do not allow injecting it.

Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Revert "rcu: init rcu_registry_lock after fork"

This reverts commit 5243722376873a48e9852a58b91f4d4101ee66e4.
The patch forgot about rcu_sync_lock and was committed by mistake.

Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches (v2)

# gpg: Signature made Mon 14 Sep 2015 15:56:54 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream: (23 commits)
  qcow2: Make qcow2_alloc_bytes() more explicit
  vmdk: Fix next_cluster_sector for compressed write
  iotests: Add test for checking large image files
  qcow2: Make size_to_clusters() return uint64_t
  qemu-iotests: More qcow2 reopen tests
  qemu-iotests: Reopen qcow2 with lazy-refcounts change
  qcow2: Support updating driver-specific options in reopen
  qcow2: Make qcow2_update_options() suitable for transactions
  qcow2: Fix memory leak in qcow2_update_options() error path
  qcow2: Leave s unchanged on qcow2_update_options() failure
  qcow2: Move rest of option handling to qcow2_update_options()
  qcow2: Move qcow2_update_options() call up
  qcow2: Factor out qcow2_update_options()
  qcow2: Improve error message
  qemu-io: Add command 'reopen'
  qemu-io: Remove duplicate 'open' error message
  block: Allow specifying driver-specific options to reopen
  qcow2: Rename BDRVQcowState to BDRVQcow2State
  block: Drop bdrv_find_whitelisted_format()
  block: Drop drv parameter from bdrv_fill_options()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qapi: Fix cgen() for Python older than 2.7

A feature new in Python 2.7 crept into commit 77e703b: re.subn()'s
fifth argument.  Avoid that, use re.compile().

Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1441640755-23902-1-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.

And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs

# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream: (44 commits)
  cutils: work around platform differences in strto{l,ul,ll,ull}
  cpu-exec: fix lock hierarchy for user-mode emulation
  exec: make mmap_lock/mmap_unlock globally available
  tcg: comment on which functions have to be called with mmap_lock held
  tcg: add memory barriers in page_find_alloc accesses
  remove unused spinlock.
  replace spinlock by QemuMutex.
  cpus: remove tcg_halt_cond and tcg_cpu_thread globals
  cpus: protect work list with work_mutex
  scripts/dump-guest-memory.py: fix after RAMBlock change
  configure: Add support for jemalloc
  add macro file for coccinelle
  configure: factor out adding disas configure
  vhost-scsi: fix wrong vhost-scsi firmware path
  checkpatch: remove tests that are not relevant outside the kernel
  checkpatch: adapt some tests to QEMU
  CODING_STYLE: update mixed declaration rules
  qmp: Add example usage of strto*l() qemu wrapper
  cutils: Add qemu_strtoull() wrapper
  cutils: Add qemu_strtoll() wrapper
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qcow2: Make qcow2_alloc_bytes() more explicit

In case of -EAGAIN returned by update_refcount(), we should discard the
cluster offset we were trying to allocate and request a new one, because
in theory that old offset might now be taken by a refcount block.

In practice, this was not the case due to update_refcount() generally
returning strictly monotonic increasing cluster offsets. However, this
behavior is not set in stone, and it is also not obvious when looking at
qcow2_alloc_bytes() alone, so we should not rely on it.

Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

vmdk: Fix next_cluster_sector for compressed write

When the VMDK is streamOptimized (or compressed), the
next_cluster_sector must not be incremented by a fixed number of
sectors. Instead of this, it must be rounded up to the next consecutive
sector. Fixing this results in much smaller compressed images.

Signed-off-by: Radoslav Gerganov <rgerganov@vmware.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

iotests: Add test for checking large image files

Add a test for checking a qcow2 file with a multiple of 2^32 clusters.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qcow2: Make size_to_clusters() return uint64_t

Sadly, some images may have more clusters than what can be represented
using a plain int. We should be prepared for that case (in
qcow2_check_refcounts() we actually were trying to catch that case, but
since size_to_clusters() truncated the returned value, that check never
did anything useful).

Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qemu-iotests: More qcow2 reopen tests

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qemu-iotests: Reopen qcow2 with lazy-refcounts change

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qcow2: Support updating driver-specific options in reopen

For updating the cache sizes, disabling lazy refcounts and updating the
clean_cache_timer there is a bit more to do than just changing the
variables, but otherwise we're all set for changing options during
bdrv_reopen().

Just implement the missing pieces and hook the functions up in
bdrv_reopen().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qcow2: Make qcow2_update_options() suitable for transactions

Before we can allow updating options at runtime with bdrv_reopen(), we
need to split the function into prepare/commit/abort parts.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qcow2: Fix memory leak in qcow2_update_options() error path

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qcow2: Leave s unchanged on qcow2_update_options() failure

On return, either all new options should be applied to BDRVQcowState (on
success), or all of the old settings should be preserved (on failure).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qcow2: Move rest of option handling to qcow2_update_options()

With this commit, the handling of driver-specific options in
qcow2_open() is completely separated out into qcow2_update_options().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qcow2: Move qcow2_update_options() call up

qcow2_update_options() only updates some variables in BDRVQcowState and
doesn't really depend on other parts of it being initialised yet, so it
can be moved so that it immediately follows the other half of option
handling code in qcow2_open().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qcow2: Factor out qcow2_update_options()

Eventually we want to be able to change options at runtime. As a first
step towards that goal, separate some option handling code from the
general initialisation code in qcow2_open().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qcow2: Improve error message

Eric says that "any" sounds better than "either", and my non-native
feeling says the same, so let's change it.

Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qemu-io: Add command 'reopen'

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qemu-io: Remove duplicate 'open' error message

qemu_opts_parse_noisily() already prints an error message with the exact
reason why the parsing failed. No need to add another less specific one.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

block: Allow specifying driver-specific options to reopen

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qcow2: Rename BDRVQcowState to BDRVQcow2State

BDRVQcowState is already used by qcow1, and gdb is always confused which
one to use. Rename the qcow2 one so they can be distinguished.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>

block: Drop bdrv_find_whitelisted_format()

It is unused by now, so we can drop it.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Drop drv parameter from bdrv_fill_options()

Now that this parameter is effectively unused, we can drop it and change
the function accordingly.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Drop drv parameter from bdrv_open_inherit()

Now that this parameter is effectively unused, we can drop it and just
pass NULL to bdrv_fill_options().

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Drop drv parameter from bdrv_open()

Now that this parameter is effectively unused, we can drop it and just
pass NULL on to bdrv_open_inherit().

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Always pass NULL as drv for bdrv_open()

Change all callers of bdrv_open() to pass the driver name in the options
QDict instead of passing its BlockDriver pointer.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20150914' into staging

target-arm queue:
 * fix GIC region size in xlnx-zynqmp
 * xlnx-zynqmp: Remove unnecessary brackets
 * improve A64 generated TCG code
 * add GPIO devices to i.MX25 and i.MX31
 * more missing pieces for EL2 support

# gpg: Signature made Mon 14 Sep 2015 14:51:12 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20150914: (24 commits)
  target-arm: Add VMPIDR_EL2
  target-arm: Break out mpidr_read_val()
  target-arm: Add VPIDR_EL2
  target-arm: Suppress EPD for S2, EL2 and EL3 translations
  target-arm: Suppress TBI for S2 translations
  target-arm: Add VTTBR_EL2
  target-arm: Add VTCR_EL2
  hw/cpu/{a15mpcore, a9mpcore}: Handle missing has_el3 CPU props gracefully
  i.MX: Add GPIO devices to i.MX25 SOC
  i.MX: Add GPIO devices to i.MX31 SOC
  i.MX: Add GPIO device
  target-arm: Use tcg_gen_extrh_i64_i32
  target-arm: Recognize ROR
  target-arm: Eliminate unnecessary zero-extend in disas_bitfield
  target-arm: Recognize UXTB, UXTH, LSR, LSL
  target-arm: Recognize SXTB, SXTH, SXTW, ASR
  target-arm: Implement fcsel with movcond
  target-arm: Implement ccmp branchless
  target-arm: Use setcond and movcond for csel
  target-arm: Handle always condition codes within arm_test_cc
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Add VMPIDR_EL2

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-9-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Break out mpidr_read_val()

Break out mpidr_read_val() to allow future sharing of the
code that conditionally sets the M and U bits of MPIDR.

No functional changes.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-8-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Add VPIDR_EL2

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-7-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Suppress EPD for S2, EL2 and EL3 translations

Stage-2 translations, EL2 and EL3 regimes don't have the
EPD control.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-6-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Suppress TBI for S2 translations

Stage-2 MMU translations do not have configurable TBI as
the top byte is always 0 (48-bit IPAs).

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-5-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Add VTTBR_EL2

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-4-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Add VTCR_EL2

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-3-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed typo in comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/cpu/{a15mpcore, a9mpcore}: Handle missing has_el3 CPU props gracefully

Handle missing CPU support for EL3 gracefully.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-2-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

i.MX: Add GPIO devices to i.MX25 SOC

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 2eb129ba8713aedfe877eaa3d8de80061d880fbb.1441828793.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

i.MX: Add GPIO devices to i.MX31 SOC

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 60b67c9a8b948159f4b4163ead86fbf701c011c6.1441828793.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

i.MX: Add GPIO device

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 5ea3b0021e47cf7f7d883a7edbabee44980f3df7.1441828793.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Use tcg_gen_extrh_i64_i32

Usually, eliminate an operation from the translator by combining
a shift with an extract.

In the case of gen_set_NZ64, we don't need a boolean value for cpu_ZF,
merely a non-zero value.  Given that we can extract both halves of a
64-bit input in one call, this simplifies the code.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-12-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Recognize ROR

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-11-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Eliminate unnecessary zero-extend in disas_bitfield

For !SF, this initial ext32u can't be optimized away by the
current TCG code generator.  (It would require backward bit
liveness propagation.)

But since the range of bits for !SF are already constrained by
unallocated_encoding, we'll never reference the high bits anyway.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-10-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Recognize UXTB, UXTH, LSR, LSL

These are all special case aliases of UBFM.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-9-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Recognize SXTB, SXTH, SXTW, ASR

These are all special case aliases of SBFM.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-8-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Implement fcsel with movcond

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-7-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Implement ccmp branchless

This can allow much of a ccmp to be elided when particular
flags are subsequently dead.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-6-git-send-email-rth@twiddle.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Use setcond and movcond for csel

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-5-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Handle always condition codes within arm_test_cc

Handling this with TCG_COND_ALWAYS will allow these unlikely
cases to be handled without special cases in the rest of the
translator.  The TCG optimizer ought to be able to reduce
these ALWAYS conditions completely.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-4-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Introduce DisasCompare

Split arm_gen_test_cc into 3 functions, so that it can be reused
for non-branch TCG comparisons.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-3-git-send-email-rth@twiddle.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Share all common TCG temporaries

This is a bug fix for aarch64.  At present, we have branches using
the 32-bit (translate.c) versions of cpu_[NZCV]F, but we set the flags
using the 64-bit (translate-a64.c) versions of cpu_[NZCV]F.  From
the view of the TCG code generator, these are unrelated variables.

The bug is hard to see because we currently only read these variables
from branches, and upon reaching a branch TCG will first spill live
variables and then reload the arguments of the branch.  Since the
32-bit versions were never live until reaching the branch, we'd re-read
the data that had just been spilled from the 64-bit versions.

There is currently no such problem with the cpu_exclusive_* variables,
but there's no point in tempting fate.

Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-2-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

xlnx-zynqmp: Remove unnecessary brackets around error messages

The errp and err variable have unnecessary brackets around them,
so remove the brackets.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 9900393572b63f2ec3d68785ca98193d81e0ac71.1441758563.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

arm: xlnx-zynqmp: Fix up GIC region size

The GIC in ZynqMP cover a 64K address space, however the actual
registers are decoded within a 4K address space and mirrored at the 4K
boundaries. This change fixes the defined size for these regions as it
was set to 0x4000/16K incorrectly.

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441719672-25296-1-git-send-email-nathan@nathanrossi.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/aurel/tags/pull-sh4-next-20150913' into staging

sh4-next:

- TCG optimizations
- fix initramfs endianness issue

# gpg: Signature made Sun 13 Sep 2015 22:16:12 BST using RSA key ID 1DDD8C9B
# gpg: Good signature from "Aurelien Jarno <aurelien@aurel32.net>"
# gpg:                 aka "Aurelien Jarno <aurelien@jarno.fr>"
# gpg:                 aka "Aurelien Jarno <aurel32@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7746 2642 A9EF 94FD 0F77  196D BA9C 7806 1DDD 8C9B

* remotes/aurel/tags/pull-sh4-next-20150913:
  sh4: Fix initramfs initialization for endiannes-mismatched targets
  target-sh4: improve shad instruction
  target-sh4: improve shld instruction
  target-sh4: improve cmp/str instruction
  target-sh4: use deposit in swap.b instruction
  target-sh4: add flags markups for FP helpers

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

sh4: Fix initramfs initialization for endiannes-mismatched targets

If host and target endianness does not match, loding an initramfs does not work.
Fix by writing boot parameters with appropriate endianness conversion.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

target-sh4: improve shad instruction

The SH4 shad instruction can shift in both direction, depending on the
sign of the shift. This is currently implemented using branches, which
is not really efficient and prevents the optimizer to do its job. In
practice it is often used with a constant loaded in a register just
before.

Simplify the implementation by computing both the value shifted to the
left and to the right, and then selecting the correct one with a
movcond. As with a negative value the shift amount can go up to 32 which
is undefined, we shift the value in two steps.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

target-sh4: improve shld instruction

The SH4 shld instruction can shift in both direction, depending on the
sign of the shift. This is currently implemented using branches, which
is not really efficient and prevents the optimizer to do its job. In
practice it is often used with a constant loaded in a register just
before.

Simplify the implementation by computing both the value shifted to the
left and to the right, and then selecting the correct one with a
movcond. As with a negative value the shift amount can go up to 32 which
is undefined, we shift the value in two steps.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

target-sh4: improve cmp/str instruction

Instead of testing bytes one by one, we can use the following trick
from https://graphics.stanford.edu/~seander/bithacks.html:

  haszero(v) = (v - 0x01010101) & ~v & 0x80808080

The subexpression v - 0x01010101, evaluates to a high bit set in any
byte whenever the corresponding byte in v is zero or greater than 0x80.
The sub-expression ~v & 0x80808080 evaluates to high bits set in bytes
where the byte of v doesn't have its high bit set (so the byte was less
than 0x80). Finally, by ANDing these two sub-expressions the result is
the high bits set where the bytes in v were zero, since the high bits
set due to a value greater than 0x80 in the first sub-expression are
masked off by the second.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

target-sh4: use deposit in swap.b instruction

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

target-sh4: add flags markups for FP helpers

Most floating point helpers can trigger an exception, but don't change
the globals. Mark these helpers as TCG_CALL_NO_WG.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20150911' into staging

queued tcg related patches

# gpg: Signature made Fri 11 Sep 2015 16:17:00 BST using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/pull-tcg-20150911:
  cpu-exec: introduce loop exit with restore function
  softmmu: remove now unused functions
  softmmu: add helper function to pass through retaddr
  tlb: Add "ifetch" argument to cpu_mmu_index()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

scripts/qemu-gdb: Add brief comment describing usage

Add a brief comment describing how to use the debug support
from GDB.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1439574392-4403-5-git-send-email-peter.maydell@linaro.org

scripts/qemu-gdb: Silently pass through SIGUSR1

SIGUSR1 is QEMU's IPI signal, and it gets sent a lot, so is
best silently passed through to the guest without stopping.
Make qemu-gdb.py do this bit of configuration for the user.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1439574392-4403-4-git-send-email-peter.maydell@linaro.org

scripts/qemu-gdb: Split CoroutineCommand into its own file

Split the implementation of CoroutineCommand into its own file.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1439574392-4403-3-git-send-email-peter.maydell@linaro.org

scripts/qemu-gdb: Split MtreeCommand into its own module

As we add more commands to our Python gdb debugging support, it's
going to get unwieldy to have everything in a single file. Split
the implementation of the 'mtree' command from qemu-gdb.py into
its own module.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1439574392-4403-2-git-send-email-peter.maydell@linaro.org

cpu-exec: introduce loop exit with restore function

This patch introduces loop exit function, which also
restores guest CPU state according to the value of host
program counter.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095702.13280.97477.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>

softmmu: remove now unused functions

Now that the cpu_ld/st_* function directly call helper_ret_ld/st, we can
drop the old helper_ld/st functions.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095656.13280.7085.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>

softmmu: add helper function to pass through retaddr

This patch introduces several helpers to pass return address
which points to the TB. Correct return address allows correct
restoring of the guest PC and icount. These functions should be used when
helpers embedded into TB invoke memory operations.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095650.13280.32255.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>

tlb: Add "ifetch" argument to cpu_mmu_index()

This is set to true when the index is for an instruction fetch
translation.

The core get_page_addr_code() sets it, as do the SOFTMMU_CODE_ACCESS
acessors.

All targets ignore it for now, and all other callers pass "false".

This will allow targets who wish to split the mmu index between
instruction and data accesses to do so. A subsequent patch will
do just that for PowerPC.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Message-Id: <1439796853-4410-2-git-send-email-benh@kernel.crashing.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2015-09-11' into staging

trivial patches for 2015-09-11

# gpg: Signature made Fri 11 Sep 2015 12:02:43 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2015-09-11: (26 commits)
  virtio-vga: enable for i386
  hw/arm/spitz: Remove meaningless blank Property
  hw/gpio/zaurus: Remove meaningless blank Property
  hw/virtio/virtio-pci: Remove meaningless blank Property
  hw/s390x/s390-virtio-bus: Remove meaningless blank Property
  typofixes - v4
  qapi-schema: remove legacy<> from doc
  disas/microblaze: Remove unused code
  help: dd missing newline
  Target-ppc: Remove unnecessary variable
  baum: Fix build with debugging enabled
  linux-user: Fix warnings caused by missing 'static' attribute
  opts: produce valid command line in qemu_opts_print
  docs: fix a qga/qapi-schema.json comment
  trivial: remove trailing newline from error_report
  maint: avoid useless "if (foo) free(foo)" pattern
  maint: avoid useless "if (foo) free(foo)" pattern
  maint: remove unused include for strings.h
  maint: remove unused include for signal.h
  maint: remove unused include for dirent.h
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

virtio-vga: enable for i386

This one just syncs x86_64 and i386.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

hw/arm/spitz: Remove meaningless blank Property

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

hw/gpio/zaurus: Remove meaningless blank Property

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

hw/virtio/virtio-pci: Remove meaningless blank Property

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

hw/s390x/s390-virtio-bus: Remove meaningless blank Property

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

typofixes - v4

Signed-off-by: Veres Lajos <vlajos@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

qapi-schema: remove legacy<> from doc

The legacy<> type is no longer used since 7ce7ffe02.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

disas/microblaze: Remove unused code

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

help: dd missing newline

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

Target-ppc: Remove unnecessary variable

Compress lines and remove the variable ret.

Change made using Coccinelle script

@@
expression ret;
@@
- if (ret) return ret;
- return 0;
+ return ret;
@@
local idexpression ret;
expression e;
@@
- ret = e;
- return ret;
+ return e;
@@
type T; identifier i;
@@
- T i;
... when != i

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

baum: Fix build with debugging enabled

cur and buf are pointers, so the difference is a ptrdiff_t

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

linux-user: Fix warnings caused by missing 'static' attribute

Warnings from the Sparse static analysis tool:

linux-user/main.c:40:12: warning:
 symbol 'filename' was not declared. Should it be static?
linux-user/main.c:41:12: warning:
 symbol 'argv0' was not declared. Should it be static?
linux-user/main.c:42:5: warning:
 symbol 'gdbstub_port' was not declared. Should it be static?
linux-user/main.c:43:11: warning:
 symbol 'envlist' was not declared. Should it be static?

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

opts: produce valid command line in qemu_opts_print

This will let us print options in a format that the user would actually
write it on the command line (foo=bar,baz=asd,etc=def), without
prepending a spurious comma at the beginning of the list, or quoting
values unnecessarily.  This patch provides the following changes:
* write and id=, if the option has an id
* do not print separator before the first element
* do not quote string arguments
* properly escape commas (,) for QEMU

Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

docs: fix a qga/qapi-schema.json comment

For consistency with the rest of the comment blocks.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

trivial: remove trailing newline from error_report

Minor cleanup.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

maint: avoid useless "if (foo) free(foo)" pattern

My Coccinelle semantic patch finds a few more, because it also fixes up
the equally pointless conditional

    if (foo) {
        free(foo);
        foo = NULL;
    }

Result (feel free to squash it into your patch):

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

maint: avoid useless "if (foo) free(foo)" pattern

The free() and g_free() functions both happily accept
NULL on any platform QEMU builds on. As such putting a
conditional 'if (foo)' check before calls to 'free(foo)'
merely serves to bloat the lines of code.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

maint: remove unused include for strings.h

A number of files were including strings.h but not using any
of the functions it provides

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

maint: remove unused include for signal.h

A number of files were including signal.h but not using any
of the functions it provides

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

maint: remove unused include for dirent.h

A number of files were including dirent.h but not using any
of the functions it provides

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

maint: remove unused include for assert.h

A number of files were including assert.h but not using any
of the functions it provides

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

maint: remove / fix many doubled words

Many source files have doubled words (eg "the the", "to to",
and so on). Most of these can simply be removed, but a couple
were actual mis-spellings (eg "to to" instead of "to do").
There was even one triple word score "to to to" :-)

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

maint: remove double semicolons in many files

A number of source files have statements accidentally
terminated by a double semicolon - eg 'foo = bar;;'.
This is harmless but a mistake none the less.

The tcg/ia64/tcg-target.c file is whitelisted because
it has valid use of ';;' in a comment containing assembly
code.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>