Ander Conselvan de Oliveira [Wed, 15 Feb 2012 13:02:24 +0000 (15:02 +0200)]
gfx: drv: update meminfo reference count when creating/destroying fbs
The fbs may outlive the mem info if the client frees the memory before
removing the fb so make sure the memory backing the fb lives as long
as the fb itself.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ander Conselvan de Oliveira [Wed, 15 Feb 2012 13:02:23 +0000 (15:02 +0200)]
gfx: pvr: add an interface for inc/dec meminfo ref count
The drm part of the pvr driver stores pointers to mem infos but those
may be freed by the clients. If the reference counts aren't increased
properly, those mem infos may be freed while the kernel still
references them.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ander Conselvan de Oliveira [Wed, 15 Feb 2012 13:02:22 +0000 (15:02 +0200)]
gfx: drv: support creating fb's from mapped memory
If a client passes a handle to a mapped memory to drmModeAddFB, the
ioctl will fail since the gtt mapping code will fail to get its page
list. Fix that by using a reference to the original meminfo instead
of the mapped one.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ander Conselvan de Oliveira [Wed, 15 Feb 2012 13:02:21 +0000 (15:02 +0200)]
gfx: pvr: add a way of getting the src meminfo backing a mapped one
This will be used to implement on the drm side support for creating
a drm fb from a mapped memory handle.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ander Conselvan de Oliveira [Wed, 15 Feb 2012 13:02:20 +0000 (15:02 +0200)]
gfx: pvr: unifdef RES_MAN_EXTEND
The PVRSRVGetResData function will be used in a follow up patches to
implement support for creating drm fb's from mapped exported memory.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ander Conselvan de Oliveira [Wed, 15 Feb 2012 13:02:19 +0000 (15:02 +0200)]
gfx: drv: don't store meminfo handle on psbfb
The handle has no reference count and might be freed by the client
before the psbfb is destroyed.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ander Conselvan de Oliveira [Wed, 15 Feb 2012 13:02:18 +0000 (15:02 +0200)]
gfx: drv: use psbfb->pvrBO instead of hKernelMemInfo on page flip code
The meminfo is already stored on psbfb. Remove the extra indirection
through psb_get_meminfo_by_handle.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ander Conselvan de Oliveira [Wed, 15 Feb 2012 13:02:17 +0000 (15:02 +0200)]
gfx: drv: pass meminfo instead of handle to psb_gtt_{unmap, map}_meminfo
The handles are process specific and may be freed while the kernel is
still using the meminfo.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ander Conselvan de Oliveira [Wed, 15 Feb 2012 13:02:16 +0000 (15:02 +0200)]
gfx: gtt: refcount gtt mappings
Currently psb_gtt_map_* can handle multiple calls with the same
handle but will remove the pages from gtt as soon as one call to
psb_gtt_unmap_* is made. Since multiple drm_fb's can be added with
the same handle and the driver will cal psb_gtt_map_meminfo for each
one of them, this could lead to unmapping memory that is still being
used.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ander Conselvan de Oliveira [Wed, 15 Feb 2012 13:02:15 +0000 (15:02 +0200)]
gfx: gtt: refactor gtt mapping code
Make room for inserting reference counting in the psb_gtt_mem_mapping
objects by refactoring the map and unmap code so that lower level
objects are allocated in lower level functions.
There is a hash table per process that holds a psb_gtt_mem_mapping
object which in turn holds a drm_mm_node object. The current
implementation allocs a drm_mm_node object in the psb_gtt_map_*
functions and then uses helper functions to wrap this node inside
a mapping object. When freeing this object, the drm_mm_node has to
be passed to the psb_gtt_unmap_* functions so that it can be freed.
This patch changes this logic so that the psb_gtt_map_* functions
allocate the mapping object through a helper function
(psb_gtt_add_mapping) that in turns allocates the node object. When
freeing, the psb_gtt_unmap_* functions will call psb_gtt_remove_mapping
which in will in turn free the node object.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ander Conselvan de Oliveira [Wed, 15 Feb 2012 13:02:14 +0000 (15:02 +0200)]
gfx: drv: fix resource leak in psb_gtt_map_meminfo
If psb_gtt_map_meminfo was called with an already mapped handle a node
would be allocated with drm_mm_get_block_atomic in psb_gtt_mm_alloc_mem.
Later, on psb_gtt_mm_alloc_insert_mem_mapping (called by
psb_gtt_add_node), the reference to the allocated node would be
replaced by the node previously allocated for the handle, so the former
was never free'd.
This commit changes psb_gtt_map_meminfo to check for an existing node
before allocating a new one.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ander Conselvan de Oliveira [Wed, 15 Feb 2012 13:02:13 +0000 (15:02 +0200)]
gfx: drv/psb_gtt.c: add spaces around comments
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ander Conselvan de Oliveira [Wed, 15 Feb 2012 13:02:12 +0000 (15:02 +0200)]
gfx: drv/psb_gtt.c: replace printk with DRM_DEBUG
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ander Conselvan de Oliveira [Wed, 15 Feb 2012 13:02:11 +0000 (15:02 +0200)]
gfx: drv/psb_gtt.c: improve readability by using ERR_PTR
A lot of functions in this file return a value through a parameter
and use the return value for returning an error value. Using ERR_PTR
makes the code a bit more readable.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ander Conselvan de Oliveira [Wed, 15 Feb 2012 13:02:10 +0000 (15:02 +0200)]
gfx: drv/psb_gtt.c: make function calls take as few lines as possible
Comestic fix. No code changes.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ander Conselvan de Oliveira [Wed, 15 Feb 2012 13:02:09 +0000 (15:02 +0200)]
gfx: drv: change psb_gtt_insert_* to remove casting
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ander Conselvan de Oliveira [Wed, 15 Feb 2012 13:02:08 +0000 (15:02 +0200)]
gfx: drv/psb_gtt.c: remove unnecessary casting of psb_get_tgid() to u32
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ander Conselvan de Oliveira [Wed, 15 Feb 2012 13:02:07 +0000 (15:02 +0200)]
gfx: drv: fix psb_gtt_{map, unmap}_pvr_memory interface
Change data types to avoid unnecessary casting.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ander Conselvan de Oliveira [Wed, 15 Feb 2012 13:02:06 +0000 (15:02 +0200)]
gfx: drv/psb_gtt.h: fix indentation
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ville Syrjälä [Wed, 15 Feb 2012 13:02:05 +0000 (15:02 +0200)]
gfx: drv: Do not kfree() pvr buffer's page list
psb_get_pages_by_mem_handle() doesn't allocate a new page list. Instead
it simply returns a reference to the pvr buffer's page list. Do not
kfree() said list in the caller.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Oliver McFadden [Thu, 9 Feb 2012 14:55:28 +0000 (16:55 +0200)]
drv: psb: check crtc pointer before calling in DPMS and mode set.
Avoid the possibility of oops-ing the kernel by running the
test-opengl-fillrate test (and others) which bypass DRM_MASTER
authentication.
Typically the test will execute succesfully, however when
unblanking/un-suspending we NULL deref in gfx_late_resume()
Signed-off-by: Oliver McFadden <oliver.mcfadden@intel.com>
Reviewed-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Tue, 7 Feb 2012 13:08:31 +0000 (15:08 +0200)]
gfx: display: remove unused panel_desc field and defines
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Tue, 7 Feb 2012 13:08:30 +0000 (15:08 +0200)]
gfx: display: cleanup ospm_power_suspend()
No functional changes, just a stylistic cleanup to make the function easier
to follow.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Tue, 7 Feb 2012 13:08:29 +0000 (15:08 +0200)]
gfx: display: remove useless gb{Suspend,Resume}InProgress flags
The gbSuspendInProgress and gbResumeInProgress flags are only ever true
when the g_ospm_mutex is held. The locking should be in order without
these.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Tue, 7 Feb 2012 13:08:28 +0000 (15:08 +0200)]
gfx: display: remove redundant code in ospm_power_using_hw_begin()
The display island should already be on at this point, and the power up
status for video enc/dec islands has already been checked some lines
earlier.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Tue, 7 Feb 2012 13:08:27 +0000 (15:08 +0200)]
gfx: display: drop redundant ospm_resume_pci() in ospm_power_using_hw_begin()
The runtime resume through pm_runtime_get_sync() should already have taken
care of ospm_resume_pci(). No need to repeat here.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Tue, 7 Feb 2012 13:08:26 +0000 (15:08 +0200)]
gfx: display: ospm_power_using_hw_begin() rewrite
ospm_power_using_hw_begin() had gotten overly complicated with a plethora
of variables and code paths. The code can be simplified considerably by
making the observation that the function is never called with force_on in
atomic context, i.e. if the power island is off, it will not be switched on
in atomic context.
Split the function into ospm_power_using_hw_begin() and
ospm_power_using_hw_begin_atomic(), of which only the latter may be called
in an atomic context. Clean up and simplify the code with the new
assumptions that can be made.
There is still plenty of strangeness left, but this is a big step forward
in making the code possible to understand.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Tue, 7 Feb 2012 13:08:25 +0000 (15:08 +0200)]
gfx: display: remove no-op assignments in ospm_power_using_hw_begin()
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Tue, 7 Feb 2012 13:08:24 +0000 (15:08 +0200)]
gfx: display: switch to the power island management code in the PMU driver
Both the GFX and ISP drivers need to switch on and off the relevant power
islands through PUnit. If a centralized driver with proper locking is not
used, they may stomp on each others' toes accessing the PUnit registers.
Obviously, this also reduces code duplication, and the power island
management code is of better quality in the PMU driver anyway.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Tue, 7 Feb 2012 13:08:23 +0000 (15:08 +0200)]
gfx: display: use a bool parameter for force in ospm_power_using_hw_begin()
Remove an unnecessary level of abstraction from what is a simple thing.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Imre Deak [Wed, 1 Feb 2012 15:30:42 +0000 (17:30 +0200)]
gfx: drv/pvr: cmd trace: show both old and new flip req buffers
For flip request commands the trace output showed only information on
one buffer: the DC flip code showed the new buffer while the DRM
specific flip code showed the old buffer. This in itself is
inconsistent, besides we want to get information on both buffers. So
show both buffers.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Imre Deak [Wed, 1 Feb 2012 15:30:41 +0000 (17:30 +0200)]
gfx: pvr: cmd trace: rename flip request syncobj names
The flip request command has an old and a new buffer (and the
corresponding sync objects) as a parameter. Rename the relevant
entries in the trace output to make this clearer.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Imre Deak [Fri, 27 Jan 2012 16:27:32 +0000 (18:27 +0200)]
gfx: pvr: check the size of SGX_READ_HWPERF IOCTL parameters
We need to add a separate size check for this IOCTL's parameters, since
they are passed by a pointer in the IOCTL's input structure. We do check
the size for all IOCTL's input structure already, but we need to cover
such derefenced objects separately.
Increase the driver's minor version too. This will still let the current
user space libraries work, except for this IOCTL, which was broken
before anyway. A related user space library fix will be submitted to
make the IOCTL work.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Tested-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Imre Deak [Fri, 27 Jan 2012 16:27:31 +0000 (18:27 +0200)]
gfx: pvr: fix SGX_READ_HWPERF IOCTL according to v1.7 ABI
There has been a change in the parameters for this IOCTL in v1.7 of the
driver. While the userspace library was updated accordingly we didn't do
this on the kernel side. We missed the difference since the size of the
structure wasn't checked against the user space version. The next patch
will add this check to avoid similar problems in the future.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Tested-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Andrew Boie [Thu, 2 Feb 2012 00:30:52 +0000 (16:30 -0800)]
pvr_debugfs: Fix inline function declaration
This fixes a compilation error if CONFIG_DEBUG_FS isn't enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Antti Koskipaa [Tue, 31 Jan 2012 15:12:39 +0000 (17:12 +0200)]
gfx: drv: Add support for CABC
CABC (Content Adaptive Backlight Control) is a power saving technique
that is supported by the mfld tablet LCD panel.
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Antti Koskipaa [Tue, 31 Jan 2012 15:12:38 +0000 (17:12 +0200)]
gfx: drv: Fix panel poweron sleep value
Panel spec says t1+t2+t5 = 260 ms. It's more complicated than that
but the driver is not flexible enough to handle all the cases. This
should be good enough, and is the absolute minimum.
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Antti Koskipaa [Tue, 31 Jan 2012 15:12:37 +0000 (17:12 +0200)]
gfx: drv: Move stuff around
Move a function to where it belongs so that panel register definitions
need not to be declared globally.
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Antti Koskipaa [Tue, 31 Jan 2012 15:12:36 +0000 (17:12 +0200)]
gfx: drv: Add register definitions for Chimei Innolux panel
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Hu Tiger Chen [Mon, 30 Jan 2012 22:17:20 +0000 (00:17 +0200)]
Fix intermittent hotplug lost issue because of page flip.
Since the DRM page flip mechanism keeps updatign the crtc->fb member
with the current fb to be flipped, this gets out-of-sync with the
psb_fb_helper->fb member. In the event of a HDMI hotplug, this mismatch
causes the HDMI hotplug event to be deferred and never handled. Ensure
that we are keeping both the members in sync always during flip.
Signed-off-by: Arun Kannan <arun.kannan@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Sanjay Rama Reddy [Mon, 30 Jan 2012 22:17:19 +0000 (00:17 +0200)]
mode management changes between local and external display.
- Defining our policy of setting the FB and surface dimensions
of frame buffer equal to local display dimensions and choosing
panel fitting for external display when needed. This is required since
Medfield hardware supports panel fitting only for HDMI pipe.
- Also, remove the modes selection limitations at drm during hdmi hotplug.
During drm_fb_helper_hotplug_event, the max_width and max_height are
reseted to the size of available framebuffer (which is equal to local
display), and thus removes all the hdmi modes that are greater than this
limit thus not allowing modes like 1080P to get selected for HDMI.
Hence changed the reset logic.
Signed-off-by: Arun Kannan <arun.kannan@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Hu Tiger Chen [Mon, 30 Jan 2012 22:17:18 +0000 (00:17 +0200)]
Enable suspend/resume support for HDMI.
Enable the suspend/resume hooks for OTM HDMI.
Signed-off-by: Arun Kannan <arun.kannan@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Hu Tiger Chen [Mon, 30 Jan 2012 22:17:17 +0000 (00:17 +0200)]
MUST_REVERT: Avoid calling mode set for MIPI during HDMI hotplug.
Currently, during HDMI hotplug/unplug, the MIPI mode set is invoked along
with HDMI mode set. The MIPI mode set during HDMI hotplug causes the system to hang
due to an i2c transaction failure for MIPI. Till the local display issue is fixed, we
avoid calling the MIPI mode set on every HDMI hotplug event.
Signed-off-by: Arun Kannan <arun.kannan@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Hu Tiger Chen [Mon, 30 Jan 2012 22:17:16 +0000 (00:17 +0200)]
Enable hotplug kernel handler.
Enable the OTM HDMI hotplug handler for handling HDMI
connection/disconnection events.
Signed-off-by: Arun Kannan <arun.kannan@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Hu Tiger Chen [Mon, 30 Jan 2012 22:17:15 +0000 (00:17 +0200)]
Enable the OTM HDMI driver on ICS.
Enable the OTM HDMI driver to be called from display driver and remove
older HDMI related code.
Signed-off-by: Arun Kannan <arun.kannan@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Arun Kannan [Mon, 30 Jan 2012 22:17:14 +0000 (00:17 +0200)]
Addition of the OTM HDMI driver for Medfield.
This is a modular, reusable driver for HDMI used across platforms.
This driver has already achieved HDMI certification on the Greenridge platform,
and was also reused on the Medfield honeycomb stack.
Signed-off-by: Arun Kannan <arun.kannan@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Pauli Nieminen [Mon, 30 Jan 2012 17:17:27 +0000 (19:17 +0200)]
imgv: Fix video bind page management
Shared pages has to be reference count and free by kernel if userspace
fails to free them.
To have bind ioctl manage memory correctly use existing fiex pages
infrastructure to bind and unbind pages. Fixed pages already include ttm
backed functions to free pages correctly when application process
terminates.
Based on Robin Mathew's "Fix TTM Leaking on SIGKILL" patch.
Issue: Android-926
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Acked-by: Sean V Kelley <sean.v.kelley@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Haitao Huang [Fri, 20 Jan 2012 12:51:10 +0000 (06:51 -0600)]
pvr: increase source sync object limit
Issue: ANDROID-372
Signed-off-by: Haitao Huang <haitao.huang@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Oliver McFadden [Tue, 24 Jan 2012 05:27:00 +0000 (07:27 +0200)]
gfx: display: do not spam tc35876x_brightness_control notifications.
These are very annoying and often get in the way when trying to read a
backtrace. If you really need them, you may turn on PSB debugging.
Signed-off-by: Oliver McFadden <oliver.mcfadden@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
ken lierman [Fri, 20 Jan 2012 20:20:06 +0000 (12:20 -0800)]
Make psb driver interface files not world writable
Androids CTS test doesn't allow there to be world writable /sys files.
Signed-off-by: ken lierman <ken.lierman@windriver.com>
Signed-off-by: Kwanhong Lee <kwanhong.lee@windriver.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Pauli Nieminen [Fri, 20 Jan 2012 12:59:36 +0000 (14:59 +0200)]
HACK: gfx: drv: when resuming make sure power is on
The PVR driver expects ospm_power_using_hw_begin to return only when
power is already on. But at the moment that function will only call
pm_runtime_get which is asynchronous. This can lead to the PVR driver
accessing its HW registers before the HW is powered and cause a CPU
fabric error hung.
To work around this call the sync version of pm_runtime_get if we are
not in atomic context. In fact I can't see any reason to call it
atomically, since then power on can't be guaranteed on return anyway.
But to clean up that we should check all call-sites for correctness.
Jani Nikula is currently reworking ospm_power_using_hw_begin() and
related parts that will give us a clean solution. Until that's done we'd
like this hack applied to let us resolve other PM related issues that
are currently hidden by this bug.
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Imre Deak [Wed, 11 Jan 2012 14:07:49 +0000 (16:07 +0200)]
gfx: pvr: optimize clearing sync counter trace info struct
Clearing this struct is necessary to suppress tracing for a given sync
counter. But for this we don't need to bzero the whole sync counter info
struct it's enough to set the address to zero.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Tested-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Imre Deak [Wed, 11 Jan 2012 14:07:48 +0000 (16:07 +0200)]
gfx: pvr: fix corrupted command trace for SGX transfer command
When the transfer command is called with the SGXMKIF_TQFLAGS_KEEPPENDING
source and destination sync counters were not zeroed in the
corresponding trace record, leading to a corrupted trace output.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Tested-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Pauli Nieminen [Wed, 11 Jan 2012 15:06:54 +0000 (17:06 +0200)]
gfx: drv: Add trace events for powermanagement
SGX may lockup because of incorrectly timed or missing power state
trasition for SGX or display controller.
To make future debugging simpler for these cases add command trace
entries for realeted power management changes.
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Pauli Nieminen [Wed, 11 Jan 2012 15:06:53 +0000 (17:06 +0200)]
gfx: drv: Add command trace points to flip
To make easier to debug SGX lockups with page flip code we need command
trace to have page flip events. There already exists API to add trace
events for flip chain. We can use same API for drm mode page flips.
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ville Syrjälä [Wed, 11 Jan 2012 16:27:15 +0000 (18:27 +0200)]
gfx: drv: overlay: Set CC_OUT bit in OCONFIG
Unfortunately the docs aren't exactly clear on when the bit should be set.
However all user space solutions I've seen set the bit, so let's follow suit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ville Syrjälä [Wed, 11 Jan 2012 16:27:14 +0000 (18:27 +0200)]
gfx: drv: overlay: More thorough fix for SWIDTHSW issues
The current code can still misprogram SWIDTHSW if fb->offsets[] is
suitably misaligned. Simply limit SWIDTHSW to 2k pixels in such cases.
Change the SWIDTHSW alignment code to be more readable, and align the
width to 32 bytes (SWORD), instead of 64 bytes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Naeem M. Afzal [Wed, 11 Jan 2012 19:53:50 +0000 (11:53 -0800)]
MUST_REVERT: drm: psb: Added gralloc buffer support for video
Gralloc buffers are created and bound to
TTM buffers independent of the BCD module.
This patch has received many change requests from Pauli and Jani.
Jani Nacked it. However, Sean believes the requests are not critical.
Pierre said that we have to take this patch because it is urgent,
and improve it later. This is why it is marked as MUST_REVERT. Sean is
supposed to send the new version which should be taken instead of this
one, and this commit message should be removed.
Signed-off-by: Naeem M Afzal <naeem.m.afzal@intel.com>
Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
Sean V. Kelley [Wed, 11 Jan 2012 19:53:49 +0000 (11:53 -0800)]
MUST_REVERT: gfx: drm: explicitly authenticate for Android
Added as an interim measure to proper client authentication using
DRM_AUTH IOCTLs in user space. Applied to drm_fops.c:drm_open_helper
where there is already a similar hack. Shall be removed upon
userspace implementaiton.
Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
Ville Syrjälä [Fri, 6 Jan 2012 04:17:40 +0000 (06:17 +0200)]
gfx: drv: overlay: Fix NV12 chroma SWIDTHSW
NV12 chroma SWIDTHSW must be calculated in a somewhat bizarre way.
Also fix an off-by-one error for other pixel formats.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Thu, 5 Jan 2012 13:35:45 +0000 (15:35 +0200)]
gfx: remove the outdated README
The README is outdated, and this information is better shared outside of
the kernel tree anyway.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Thu, 5 Jan 2012 13:35:44 +0000 (15:35 +0200)]
gfx: display: remove unused uopt (user options)
Remove unused code for uopt, user options.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Thu, 5 Jan 2012 13:35:43 +0000 (15:35 +0200)]
gfx: pvr: remove unused code in intel-linux directories
The directories pvr/services4/{include,srvkm}/env/linux-intel are not used
for anything. Remove.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Thu, 5 Jan 2012 13:35:42 +0000 (15:35 +0200)]
Revert "drm: Protect drm/drm_os_linux.h inclusion with #ifdef"
This reverts commit "drm: Protect drm/drm_os_linux.h inclusion with #ifdef"
to minimize gfx related diff outside drivers/staging/mrst. The header file
<drm/drm_os_linux.h> is not supposed to be included directly anyway.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Thu, 5 Jan 2012 13:35:41 +0000 (15:35 +0200)]
gfx: imgv: remove redundant #include <drm/drm_os_linux.h>
The header file <drm/drm_os_linux.h> is not supposed to be included
directly, it does not have #ifdef protection for multiple inclusion, and
it's included through <drm/drmP.h> anyway. Remove the #include.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Thu, 5 Jan 2012 13:35:40 +0000 (15:35 +0200)]
gfx: remove obsolete .gitignore
The .gitignore is no longer relevant with Medfield only build.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Thu, 5 Jan 2012 13:35:39 +0000 (15:35 +0200)]
gfx: display: make tc35876x independent of tmd vid driver
The TC35876X driver used to be bolted on the TMD panel driver with some
ifs. Make it a more independent driver instead.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Thu, 5 Jan 2012 13:35:38 +0000 (15:35 +0200)]
gfx: display: remove redundant dpi_panel_on setting
dpi_panel_on is false at init time, no need to set it again.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Thu, 5 Jan 2012 13:35:37 +0000 (15:35 +0200)]
pvr: unifdef pvr power management code for improved readability
The PVR power management code is difficult to read due to excess #ifdef 1
and #ifdef 0. Remove them.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Thu, 5 Jan 2012 13:35:36 +0000 (15:35 +0200)]
gfx: display: allow powering down GL3 cache regardless of GL3 config
The commit "psb_video: remove OSPM_GL3_CACHE_ISLAND when not enabled" made
it impossible to power down the GL3 cache island when
CONFIG_MDFD_GL3=n. It's powered on at boot (likely by firmware) so allow
powering down regardless of config.
This fixes the following situation in /sys/kernel/debug/mid_pmu_states when
display is off:
pci 8086 0130 0000:00:02.0 pvrsrvkm:
|-------> GFX D0i3
|-------> Video Decoder D0i3
|-------> Video Encoder D0i3
|-------> GL3 Cache D0
|-------> Display A D0i3
|-------> Display B D0i3
|-------> Display C D0i3
|-------> MIPI-DSI D0i3
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Thu, 5 Jan 2012 13:35:35 +0000 (15:35 +0200)]
gfx: display: remove another redundant panel state variable gbdispstatus
The dev_priv->dpi_panel_on{,2} fields already track panel state. Use those
instead of gbdispstatus.
The old implementation could not have worked any better for DBI panels than
this one, but leave a comment to revisit this.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Thu, 5 Jan 2012 13:35:34 +0000 (15:35 +0200)]
gfx: display: refactor psb_runtime_{idle,suspend}
Reuse psb_runtime_idle for checking whether runtime suspend is possible in
psb_runtime_suspend, making the conditions the same for both. Do HDMI audio
suspend in suspend, not idle.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Thu, 5 Jan 2012 13:35:33 +0000 (15:35 +0200)]
gfx: display: tc35876x: remove redundant switching of dpi_panel_on state
The dev_priv->dpi_panel_on{,2} state is flipped accordingly, and on the
correct pipe, by the caller of mdfld_dsi_configure_{up,down}, so don't do
it again.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Thu, 5 Jan 2012 13:35:32 +0000 (15:35 +0200)]
gfx: display: tc35876x: make mdfld_dsi_configure_{up,down} more pipe aware
This does not fix everything about pipes in mdfld_dsi_configure_{up,down},
but is a step in the right direction.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Jani Nikula [Thu, 5 Jan 2012 13:35:31 +0000 (15:35 +0200)]
gfx: display: tc35876x: remove extra dsi_device_ready state variable
The driver is full of display state variables. Remove dsi_device_ready used
by the tc35876x, and use the existing dev_priv->dpi_panel_on instead.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Pauli Nieminen [Wed, 4 Jan 2012 14:07:33 +0000 (16:07 +0200)]
gfx: drv: Clear links when freeing head of list
Linked list is freed in psb_cleanup_pending_events is called just before
head of linked list is freed. All list entries needs to be initialized
to be empty lists to avoid accessing freed memory if logic changes in
future.
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Pauli Nieminen [Wed, 4 Jan 2012 12:57:35 +0000 (14:57 +0200)]
gfx: pvr: Fix SGX failing to complete queued rendering
SGXCommandComplete wakeups SGX to render when blocking external
operation completes. If blocking operation completes in IRQ handler
driver only sets flag to wakeup hardware but doesn't schedule the work
to handle wakeup operation.
Issue: ANDROID-529
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Pauli Nieminen [Tue, 3 Jan 2012 15:36:44 +0000 (17:36 +0200)]
gfx: drv: Clean pending page flip events when device is closed
If userspace closes the device node with pending page flips driver keeps
a pointer to file private that is already freed. Following backtrace
shows the oops happening.
[ 643.828884] BUG: unable to handle kernel paging request at
6b6b6b6b
[ 643.835082] IP: [<
c1224b6e>] __list_add+0x2a/0x5c
[ 643.888465] EIP is at __list_add+0x2a/0x5c
[ 643.943931] Call Trace:
[ 643.946376] [<
c139c0d8>] psb_intel_flip_complete+0x71/0xcb
[ 643.951937] [<
c139c1c8>] sync_callback+0x96/0x9f
[ 643.956631] [<
c1371310>] PVRSRVCallbackOnSync+0x37/0xb7
[ 643.961934] [<
c139c132>] ? psb_intel_flip_complete+0xcb/0xcb
[ 643.967673] [<
c139c049>] psb_intel_crtc_page_flip+0xa1/0xbf
[ 643.973324] [<
c1282f5d>] drm_mode_page_flip_ioctl+0x13f/0x190
[ 643.979151] [<
c12778bf>] drm_ioctl+0x276/0x332
To cleanup pending events driver has to keep linked list of pending
flips in file private. When file is closed all events in pending flips
for the file are cleared.
To avoid race conditions dev->event_lock is used to protect pending
flips lists from parallel access.
Issue: KER-47
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
CC: Rahul Verman <rahul.verma@intel.com>
Acked-by: Sean V Kelley <sean.v.kelley@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Pauli Nieminen [Tue, 3 Jan 2012 16:43:51 +0000 (18:43 +0200)]
gfx: drv: Fix page flip lockup when requesting vblank fails
drm_vblank_get may fail if specified pipe is off. In that case we won't
get vblank even and can't call drm_vblank_put. But driver still has to
complete page flip to send required completion event to userspace.
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Pauli Nieminen [Tue, 3 Jan 2012 15:36:42 +0000 (17:36 +0200)]
gfx: drv: Remove useless global variable
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Pauli Nieminen [Tue, 3 Jan 2012 15:36:41 +0000 (17:36 +0200)]
drm: ttm: Fix clearing of highmem pages
ttm might allocate highmem pages for GPU usage. But page_address works
only for normal pages. clear_highpage can be used to clear both type of
pages.
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reported-and-tested-by: Daniel Charles <daniel.charles@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Pauli Nieminen [Mon, 2 Jan 2012 14:24:31 +0000 (16:24 +0200)]
gfx: drv: Move NULL check outside spin lock
pending_flip->event is owned by single kernel thread at a time so it can
be checked outside of the spin lock. Spin lock is only protecting the
linked list where the event is added.
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Pauli Nieminen [Mon, 2 Jan 2012 14:24:30 +0000 (16:24 +0200)]
gfx: pvr: Dereference a pointer after null check
Dereferencing a pointer may only happen after NULL check to avoid crash
if the pointer is NULL.
[pvr/services4/srvkm/common/buffer_manager.c:1152]: (error) Possible
null pointer dereference: psBMHeap - otherwise it is redundant to check
if psBMHeap is null at line 1156
Reported-by: Olev Kartau <olev.kartau@intel.com>
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Pauli Nieminen [Mon, 2 Jan 2012 14:24:29 +0000 (16:24 +0200)]
gfx: imgv: Dereference a pointer after null check
Dereferencing a pointer may only happen after NULL check to avoid crash
if the pointer is NULL.
[imgv/psb_fence.c:33]: (error) Possible null pointer dereference:
dev_priv - otherwise it is redundant to check if dev_priv is null at
line 36
Reported-by: Olev Kartau <olev.kartau@intel.com>
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Pauli Nieminen [Mon, 2 Jan 2012 14:24:28 +0000 (16:24 +0200)]
gfx: drv: Remove unused variable
Remove unused stack variable which would crash -O0 optimised kernel.
[drv/psb_page_flip.c:61]: (error) Uninitialized variable: e
Reported-by: Olev Kartau <olev.kartau@intel.com>
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Imre Deak [Thu, 22 Dec 2011 20:48:33 +0000 (22:48 +0200)]
gfx: imgv: add support for wrapping a pvr buffer as ttm buffer
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Imre Deak [Thu, 22 Dec 2011 20:48:32 +0000 (22:48 +0200)]
gfx: imgv: refactor the placement allocator ioctls
Refactoring is done for better code reuse and to prepare for the next
patch.
Also while at it:
- get rid of unnecessary unlikely() annotations
- treat only negative return values as error instead of any non-zero
values
Other than the above no functional changes.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Imre Deak [Thu, 22 Dec 2011 20:48:31 +0000 (22:48 +0200)]
gfx: imgv: add memory backend support for fixed pages
Needed by the upcoming patch adding support for wrapping a pvr buffers
as ttm buffer.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Imre Deak [Thu, 22 Dec 2011 20:48:30 +0000 (22:48 +0200)]
gfx: pvr: add helper function to lookup a pvr buf by id
Needed by the upcoming patch adding support for wrapping a pvr buffer
as ttm buffer.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Imre Deak [Thu, 22 Dec 2011 20:48:29 +0000 (22:48 +0200)]
gfx: imgv: refactor the checking of buffer placement
The driver checks whether a client process has enough permission to
set/clear TTM_PL_FLAG_NO_EVICT. For busy placements we don't need to do
this every time a related IOCTL is called, since those placements never
change and they don't include this flag. So remove the check for busy
placements.
An addition in a later patch will want to check the final flags value
besides the set/clear values, so add support for it now.
While at it, also normalize the cacheability flags in
ttm_pl_setstatus_ioctl similarly to what the buffer creation IOCTLs do.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Imre Deak [Thu, 22 Dec 2011 20:48:28 +0000 (22:48 +0200)]
gfx: imgv: fix parameter checking for exec cmd IOCTL
As the comment in code suggests the IOCTL accepts only flags specifying
a GPU read or write operation, for all other flags we should return
-EINVAL. The call to psb_ttm_bo_check_placement that would seemingly
check this is actually a no-op in this case. Replace it with an actual
check. While at it, also clean up the preceeding check.
This is also needed by an upcoming patch getting rid of
psb_ttm_bo_check_placement.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Imre Deak [Thu, 22 Dec 2011 20:48:27 +0000 (22:48 +0200)]
gfx: drm: ttm: add support for non-swappable buffers
Needed by buffers that can move in GPU address space, but are not
swappable. An example is a wrapped PVR buffer, added by an upcoming
patch.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Imre Deak [Thu, 22 Dec 2011 20:48:26 +0000 (22:48 +0200)]
gfx: drm: add missing header
Fix struct undefined error for struct drm_mode_modeinfo when drm_mode.h
is not included explicitly. Needed by an upcoming patch.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Imre Deak [Thu, 22 Dec 2011 23:08:18 +0000 (01:08 +0200)]
gfx: pvr: fix uninitialized var bug on error path
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Binglin Chen [Thu, 22 Dec 2011 19:41:13 +0000 (11:41 -0800)]
psb_video: implement reset function by power up/down MSVDX
When MSVDX FW uploading is done by PUNIT, just after
MSVDX power up operation, In order to reset HW, driver need to
do one power off and power on, and wait for PUNIT re-upload FW
again.
This patch will enable driver to reset HW when there is a request.
Signed-off-by: Binglin Chen <binglin.chen@intel.com>
Signed-off-by: Daniel Charles <daniel.charles@intel.com>
Acked-by: Sean V Kelley <sean.v.kelley@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Binglin Chen [Thu, 22 Dec 2011 19:41:11 +0000 (11:41 -0800)]
psb_video: remove MSVDX firmware uploading from driver for PNW D0
For PNW C0 and older steppings, MSVDX(Video Decoder) firmware is
uploaded by driver. In PNW D0 silicon, MSVDX uploading is done by PUNIT
so video driver needs to remove firmware uploading functionality
and add adaption codes to work with PUNIT on firmware uploading,
verification, and MTX initialization.
Signed-off-by: Binglin Chen <binglin.chen@intel.com>
Signed-off-by: Daniel Charles <daniel.charles@intel.com>
Acked-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Acked-by: Sean V Kelley <sean.v.kelley@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Daniel Charles [Thu, 22 Dec 2011 19:41:10 +0000 (11:41 -0800)]
psb_video: remove OSPM_GL3_CACHE_ISLAND when not enabled
When setting the island up for OSPM_GL3_CACHE_ISLAND the code was not
protected when the config is not enabled
Signed-off-by: Daniel Charles <daniel.charles@intel.com>
Reviewed-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Sean V Kelley <sean.v.kelley@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Ville Syrjälä [Thu, 22 Dec 2011 17:06:20 +0000 (19:06 +0200)]
staging: mrst: Fix BUG_ON() triggering in drm_vblank_put()
We're calling drm_vblank_get() too late. It must be done before the
xchg() to avoid psb_flip_complete() from calling drm_vblank_put() before
drm_vblank_get(). This could trigger a a BUG_ON() in drm_vblank_get().
Earlier the pvr sync callbacks were usually executed with interrupts
disabled, which made the problem extremely unlikely to happen.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Ville Syrjälä [Thu, 22 Dec 2011 16:37:21 +0000 (18:37 +0200)]
staging: mrst: ossync: Make sync_list and sync_lock static
drivers/staging/mrst/pvr/services4/srvkm/env/linux/ossync.c:30:1: warning: symbol 'sync_lock' was not declared. Should it be static?
drivers/staging/mrst/pvr/services4/srvkm/env/linux/ossync.c:31:1: warning: symbol 'sync_list' was not declared. Should it be static?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Ville Syrjälä [Thu, 22 Dec 2011 16:37:20 +0000 (18:37 +0200)]
staging: mrst: Remove an unused variable
drivers/staging/mrst/drv/psb_page_flip.c: In function 'psb_intel_crtc_page_flip':
drivers/staging/mrst/drv/psb_page_flip.c:193: warning: unused variable 'ret'
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>