usb: typec: add support for STUSB160x Type-C controller family

STMicroelectronics USB Type-C port controllers use I2C interface to
configure, control and read the operation status of the device. All ST USB
Type-C port controllers are based on the same I2C register map. That's why
this driver can be used with all ST USB Type-C ICs.
Some ST USB Type-C port controllers are Dual Role Port (DRP), only Sink or
Source, some supports USB Power Delivery. This can be configured through
connector device tree bindings.

This driver is a basic Type-C port controller driver, with no power
delivery support. It allows to configure ST USB Type-C port controller.
Interrupt is supported and enables CC connection events, to detect
attach and detach and update Type-C subsystem accordingly as well as usb
role switch.

ST USB Type-C port controller can be supplied in three different ways
depending on the target application:
- through VDD pin only (so VDD is the main supply)
- through VSYS pin only (so VSYS is the main supply)
- through VDD and VSYS pins.
When both VDD and VSYS power supplies are present, the low power supply
VSYS is selected as main supply when VSYS voltage is above 3.1V, else
VDD is selected as main supply.

In case of Source or Dual port type, if VDD supply is present, it has to be
enabled in case of Source power role to provide Vbus. When interrupt
support is available, VDD supply is dynamically managed upon attach/detach
interrupt. When there is no interrupt support, VDD supply is enabled by
default.

Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Link: https://lore.kernel.org/r/20200924090049.9041-5-amelie.delaunay@st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: add typec_find_pwr_opmode

This patch adds a function that converts power operation mode string into
power operation mode value.

It is useful to configure power operation mode through device tree
property, as power capabilities may be linked to hardware design.

Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Link: https://lore.kernel.org/r/20200924090049.9041-3-amelie.delaunay@st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode

Some platforms have only super speed data bus connected to this device
and high speed data bus directly connected to the SoC. In such platforms
modelling connector as a child of this device is making it non compliant
with usb connector bindings. By modelling connector node as standalone
device node along with this device and the SoC data bus will make it
compliant with usb connector bindings.
Update the driver to handle this model by using OF graph API to get the
connector fwnode and usb role switch class API to get role switch handle.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200920134905.4370-5-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus

Document HS and SS data bus for the "usb-role-switch" enabled case.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200920134905.4370-4-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema

Convert ti,hd3ss3220.txt to YAML. Updated the binding documentation
as graph bindings of this device model Super Speed (SS) data bus to
the Super Speed (SS) capable connector.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20200920134905.4370-3-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'phy-for-5.10' of git://git./linux/kernel/git/phy/linux-phy into usb-next

Vinod writes:

phy for 5.9

 - Core:
   - New PHY attribute for max_link_rate

 - New phy drivers:
   - Rockchip dphy driver moved from staging
   - Socionext UniPhier AHCI PHY driver
   - Intel LGM SoC USB phy
   - Intel Keem Bay eMMC PHY driver

 - Updates:
   - Support for imx8mp usb phy
   - Support for DP Phy and USB3+DP combo phy in QMP driver
   - Support for Qualcomm sc7180 DP phy
   - Support for cadence torrent PCIe and USB single linke and multilink
     configurations along with USB, SGMII/QSGMII configurations

* tag 'phy-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits)
  phy: qcom-qmp: initialize the pointer to NULL
  phy: qcom-qmp: Add support for sc7180 DP phy
  phy: qcom-qmp: Add support for DP in USB3+DP combo phy
  phy: qcom-qmp: Use devm_platform_ioremap_resource() to simplify
  phy: qcom-qmp: Get dp_com I/O resource by index
  phy: qcom-qmp: Move 'serdes' and 'cfg' into 'struct qcom_phy'
  phy: qcom-qmp: Remove 'initialized' in favor of 'init_count'
  phy: qcom-qmp: Move phy mode into struct qmp_phy
  dt-bindings: phy: qcom,qmp-usb3-dp: Add DP phy information
  dt-bindings: phy: ti,phy-j721e-wiz: fix bindings for torrent phy
  dt-bindings: phy: cdns,torrent-phy: add reset-names
  phy: rockchip-dphy-rx0: Include linux/delay.h
  phy: fix USB_LGM_PHY warning & build errors
  phy: cadence-torrent: Add USB + SGMII/QSGMII multilink configuration
  phy: cadence-torrent: Add PCIe + USB multilink configuration
  phy: cadence-torrent: Add single link USB register sequences
  phy: cadence-torrent: Add single link SGMII/QSGMII register sequences
  phy: cadence-torrent: Configure PHY_PLL_CFG as part of link_cmn_vals
  phy: cadence-torrent: Add PHY link configuration sequences for single link
  phy: cadence-torrent: Add clk changes for multilink configuration
  ...

USB: cdc-wdm: Make wdm_flush() interruptible and add wdm_fsync().

syzbot is reporting hung task at wdm_flush() [1], for there is a circular
dependency that wdm_flush() from flip_close() for /dev/cdc-wdm0 forever
waits for /dev/raw-gadget to be closed while close() for /dev/raw-gadget
cannot be called unless close() for /dev/cdc-wdm0 completes.

Tetsuo Handa considered that such circular dependency is an usage error [2]
which corresponds to an unresponding broken hardware [3]. But Alan Stern
responded that we should be prepared for such hardware [4]. Therefore,
this patch changes wdm_flush() to use wait_event_interruptible_timeout()
which gives up after 30 seconds, for hardware that remains silent must be
ignored. The 30 seconds are coming out of thin air.

Changing wait_event() to wait_event_interruptible_timeout() makes error
reporting from close() syscall less reliable. To compensate it, this patch
also implements wdm_fsync() which does not use timeout. Those who want to
be very sure that data has gone out to the device are now advised to call
fsync(), with a caveat that fsync() can return -EINVAL when running on
older kernels which do not implement wdm_fsync().

This patch also fixes three more problems (listed below) found during
exhaustive discussion and testing.

  Since multiple threads can concurrently call wdm_write()/wdm_flush(),
  we need to use wake_up_all() whenever clearing WDM_IN_USE in order to
  make sure that all waiters are woken up. Also, error reporting needs
  to use fetch-and-clear approach in order not to report same error for
  multiple times.

  Since wdm_flush() checks WDM_DISCONNECTING, wdm_write() should as well
  check WDM_DISCONNECTING.

  In wdm_flush(), since locks are not held, it is not safe to dereference
  desc->intf after checking that WDM_DISCONNECTING is not set [5]. Thus,
  remove dev_err() from wdm_flush().

[1] https://syzkaller.appspot.com/bug?id=e7b761593b23eb50855b9ea31e3be5472b711186
[2] https://lkml.kernel.org/r/27b7545e-8f41-10b8-7c02-e35a08eb1611@i-love.sakura.ne.jp
[3] https://lkml.kernel.org/r/79ba410f-e0ef-2465-b94f-6b9a4a82adf5@i-love.sakura.ne.jp
[4] https://lkml.kernel.org/r/20200530011040.GB12419@rowland.harvard.edu
[5] https://lkml.kernel.org/r/c85331fc-874c-6e46-a77f-0ef1dc075308@i-love.sakura.ne.jp

Reported-by: syzbot <syzbot+854768b99f19e89d7f81@syzkaller.appspotmail.com>
Cc: stable <stable@vger.kernel.org>
Co-developed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200928141755.3476-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: pegasus: Use the new usb control message API.

The old usb_control_msg() let the caller handle the error and also did not
account for partial reads.  Since these are now considered harmful, move the
driver over to usb_control_msg_recv/send() calls.

Added small note about why set_registers() can't be used to substitute
set_register().

Signed-off-by: Petko Manolov <petko.manolov@konsulko.com>
Acked-by: David S. Miller <davem@davemloft.net>
Link: https://lore.kernel.org/r/20200927124909.16380-2-petko.manolov@konsulko.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: rtl8150: Use the new usb control message API.

The old usb_control_msg() let the caller handle the error and also did not
account for partial reads.  Since these are now considered harmful, move the
driver over to usb_control_msg_recv/send() calls.

Signed-off-by: Petko Manolov <petko.manolov@konsulko.com>
Acked-by: David S. Miller <davem@davemloft.net>
Link: https://lore.kernel.org/r/20200927124909.16380-3-petko.manolov@konsulko.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: displayport: Reduce noise from the driver

It's not an error if the mode can't be entered because
another mode is already active, so no longer printing an
error message if that happens.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200928133324.48841-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: hub: Add Kconfig option to reduce number of port initialization retries

Description based on one by Yasushi Asano:

According to 6.7.22 A-UUT “Device No Response” for connection timeout
of USB OTG and EH automated compliance plan v1.2, enumeration failure
has to be detected within 30 seconds.  However, the old and new
enumeration schemes each make a total of 12 attempts, and each attempt
can take 5 seconds to time out, so the PET test fails.

This patch adds a new Kconfig option (CONFIG_USB_FEW_INIT_RETRIES);
when the option is set all the initialization retry loops except the
outermost are reduced to a single iteration.  This reduces the total
number of attempts to four, allowing Linux hosts to pass the PET test.

The new option is disabled by default to preserve the existing
behavior.  The reduced number of retries may fail to initialize a few
devices that currently do work, but for the most part there should be
no change.  And in cases where the initialization does fail, it will
fail much more quickly.

Reported-and-tested-by: yasushi asano <yazzep@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200928152217.GB134701@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: hub: Clean up use of port initialization schemes and retries

The SET_CONFIG_TRIES macro in hub.c is badly named; it controls the
number of port-initialization retry attempts rather than the number of
Set-Configuration attempts.  Furthermore, the USE_NEW_SCHEME macro and
use_new_scheme() function are written in a very confusing manner,
making it almost impossible to figure out exactly what they do or
check that they are correct.

This patch renames SET_CONFIG_TRIES to PORT_INIT_TRIES, removes
USE_NEW_SCHEME entirely, and rewrites use_new_scheme() to be much more
transparent, with added comments explaining how it works.  The patch
also pulls the single call site of use_new_scheme() out from the
Get-Descriptor retry loop (where it returns the same value each time)
and renames the local variable used to store the result.

The overall effect is a minor cleanup.  However, there is one
functional change: If the "use_both_schemes" module parameter isn't
set (by default it is set), the existing code does only two retry
iterations.  After this patch it will always perform four, regardless
of the parameter's value.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200928152050.GA134701@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: qcom-qmp: initialize the pointer to NULL

Smatch complains:
drivers/phy/qualcomm/phy-qcom-qmp.c:3899 qcom_qmp_phy_probe() error: uninitialized symbol 'dp_cfg'.
drivers/phy/qualcomm/phy-qcom-qmp.c:3900 qcom_qmp_phy_probe() error: uninitialized symbol 'dp_serdes'.
drivers/phy/qualcomm/phy-qcom-qmp.c:3902 qcom_qmp_phy_probe() error: uninitialized symbol 'usb_cfg'.

This is a warning but not a practical one as dp_cfg, dp_serdes and
usb_cfg will be set and used when valid. So we can set the pointers to
NULL to quiesce the warnings.

Fixes: 52e013d0bffa ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20201001070911.140019-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Merge tag 'thunderbolt-for-v5.10-rc1' of git://git./linux/kernel/git/westeri/thunderbolt into usb-next

Mika writes:

thunderbolt: Changes for v5.10 merge window

This includes following Thunderbolt/USB4 changes for v5.10 merge window:

  * A couple of optimizations around Tiger Lake force power logic and
    NHI (Native Host Interface) LC (Link Controller) mailbox command
    processing

  * Power management improvements for Software Connection Manager

  * Debugfs support

  * Allow KUnit tests to be enabled also when Thunderbolt driver is
    configured as module.

  * Few minor cleanups and fixes

All these have been in linux-next with no reported issues.

* tag 'thunderbolt-for-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (37 commits)
  thunderbolt: Capitalize comment on top of QUIRK_FORCE_POWER_LINK_CONTROLLER
  thunderbolt: Correct tb_check_quirks() kernel-doc
  thunderbolt: Log correct zeroX entries in decode_error()
  thunderbolt: Handle ERR_LOCK notification
  thunderbolt: Use "if USB4" instead of "depends on" in Kconfig
  thunderbolt: Allow KUnit tests to be built also when CONFIG_USB4=m
  thunderbolt: Only stop control channel when entering freeze
  thunderbolt: debugfs: Fix uninitialized return in counters_write()
  thunderbolt: Add debugfs interface
  thunderbolt: No need to warn in TB_CFG_ERROR_INVALID_CONFIG_SPACE
  thunderbolt: Introduce tb_switch_is_tiger_lake()
  thunderbolt: Introduce tb_switch_is_ice_lake()
  thunderbolt: Check for Intel vendor ID when identifying controller
  thunderbolt: Introduce tb_port_is_nhi()
  thunderbolt: Introduce tb_switch_next_cap()
  thunderbolt: Introduce tb_port_next_cap()
  thunderbolt: Move struct tb_cap_any to tb_regs.h
  thunderbolt: Add runtime PM for Software CM
  thunderbolt: Create device links from ACPI description
  ACPI: Export acpi_get_first_physical_node() to modules
  ...

phy: qcom-qmp: Add support for sc7180 DP phy

Add the necessary compatible strings and phy data for the sc7180 USB3+DP
combo phy.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20200609034623.10844-1-tanmay@codeaurora.org
Link: https://lore.kernel.org/r/20200916231202.3637932-9-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: Add support for DP in USB3+DP combo phy

Add support for the USB3 + DisplayPort (DP) "combo" phy to the qmp phy
driver. We already have support for the USB3 part of the combo phy, so
most additions are for the DP phy.

Split up the qcom_qmp_phy{enable,disable}() functions into the phy init,
power on, power off, and exit functions that the common phy framework
expects so that the DP phy can add even more phy ops like
phy_calibrate() and phy_configure(). This allows us to initialize the DP
PHY and configure the AUX channel before powering on the PHY at the link
rate that was negotiated during link training.

The general design is as follows:

  1) DP controller calls phy_init() to initialize the PHY and configure
  the dp_com register region.

  2) DP controller calls phy_configure() to tune the link rate and
  voltage swing and pre-emphasis settings.

  3) DP controller calls phy_power_on() to enable the PLL and power on
  the phy.

  4) DP controller calls phy_configure() again to tune the voltage swing
  and pre-emphasis settings determind during link training.

  5) DP controller calls phy_calibrate() some number of times to change
  the aux settings if the aux channel times out during link training.

  6) DP controller calls phy_power_off() if the link rate is to be
  changed and goes back to step 2 to try again at a different link rate.

  5) DP controller calls phy_power_off() and then phy_exit() to power
  down the PHY when it is done.

The DP PHY contains a PLL that is different from the one used for the
USB3 PHY. Instead of a pipe clk there is a link clk and a pixel clk
output from the DP PLL after going through various dividers. Introduce
clk ops for these two clks that just tell the child clks what the
frequency of the pixel and link are. When the phy link rate is
configured we call clk_set_rate() to update the child clks in the
display clk controller on what rate is in use. The clk frequencies
always differ based on the link rate (i.e. 1.6Gb/s 2.7Gb/s, 5.4Gb/s, or
8.1Gb/s corresponding to various transmission modes like HBR1, HBR2 or
HBR3) so we simply store the link rate and use that to calculate the clk
frequencies.

The PLL enable sequence is a little different from other QMP phy PLLs so
we power on the PLL in qcom_qmp_phy_configure_dp_phy() that gets called
from phy_power_on(). This should probably be split out better so that
each phy has a way to run the final PLL/PHY enable sequence.

This code is based on a submission of this phy and PLL in the drm
subsystem.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20200609034623.10844-1-tanmay@codeaurora.org
Link: https://lore.kernel.org/r/20200916231202.3637932-8-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: Use devm_platform_ioremap_resource() to simplify

We can use the wrapper API here to save some lines and remove the need
for the 'base' and 'res' local variable.

Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20200916231202.3637932-7-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: Get dp_com I/O resource by index

The dp_com resource is always at index 1 according to the dts files in
the kernel. Get this resource by index so that we don't need to make
future additions to the DT binding use 'reg-names'.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20200916231202.3637932-6-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: Move 'serdes' and 'cfg' into 'struct qcom_phy'

The serdes I/O region is where the PLL for the phy is controlled.
Sometimes the PLL is shared between multiple phys, for example in the
PCIe case where there are three phys inside the same wrapper. Other
times the PLL is for a single phy, i.e. some USB3 phys. To complete the
trifecta we have the USB3+DP combo phy where the USB3 and DP phys each
have their own serdes region because they have their own PLL while they
both share a common I/O region pertaining to the USB type-c pinout and
cable orientation.

Let's move the serdes iomem pointer into 'struct qmp_phy' so that we can
correlate PLL control to the phy that uses it. This allows us to support
the USB3+DP combo phy in this driver. This isn't a problem for the
3-lane/phy PCIe phy because there is a common init function that is the
only place the serdes region is programmed.

Furthermore, move the configuration data that contains most of the
register programming sequences to the qmp phy struct. This data isn't
qmp wrapper specific. It is phy specific data used to tune various
settings for things like pre-emphasis, bias, etc.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20200916231202.3637932-5-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: Remove 'initialized' in favor of 'init_count'

We already track if any phy inside the qmp wrapper has been initialized
by means of the struct qcom_qmp::init_count member. Let's drop the
duplicate 'initialized' member to simplify the code a bit.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20200916231202.3637932-4-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: Move phy mode into struct qmp_phy

The phy mode pertains to the phy itself, i.e. 'struct qmp_phy', not the
wrapper, i.e. 'struct qcom_qmp'. Move the phy mode into the phy
structure to more accurately reflect what is going on. This also cleans
up 'struct qcom_qmp' so that it can eventually be the place where qmp
wrapper wide data is located, paving the way for the USB3+DP combo phy.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20200916231202.3637932-3-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: qcom,qmp-usb3-dp: Add DP phy information

This binding only describes the USB phy inside the USB3 + DP "combo"
phy. Add information for the DP phy and describe the sub-nodes that
represent the DP and USB3 phys that exist inside the combo wrapper.
Remove reg-names from required properties because it isn't required nor
used by the kernel driver.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: <devicetree@vger.kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20200916231202.3637932-2-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

USB: cdc-acm: clean up no-union-descriptor handling

For interfaces that lack a union descriptor, probe for a
"combined-interface" before falling back to the call-management
descriptor instead of the other way round.

This allows for the removal of the NO_DATA_INTERFACE quirk and makes the
probe algorithm somewhat easier to follow.

Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200921135951.24045-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-acm: use common data-class define

Use the data-class define provided by USB core and drop the
driver-specific one.

Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200921135951.24045-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-acm: handle broken union descriptors

Handle broken union functional descriptors where the master-interface
doesn't exist or where its class is of neither Communication or Data
type (as required by the specification) by falling back to
"combined-interface" probing.

Note that this still allows for handling union descriptors with switched
interfaces.

This specifically makes the Whistler radio scanners TRX series devices
work with the driver without adding further quirks to the device-id
table.

Reported-by: Daniel Caujolle-Bert <f1rmb.daniel@gmail.com>
Tested-by: Daniel Caujolle-Bert <f1rmb.daniel@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200921135951.24045-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "cdc-acm: hardening against malicious devices"

This reverts commit 2ad9d544f2497a7bf239c34bd2b86fd19683dbb5.

Drop bogus sanity check; an interface in the active configuration will
always have a current altsetting assigned by USB core.

Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200921135951.24045-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: ath3k: use usb_control_msg_send() and usb_control_msg_recv()

The usb_control_msg_send() and usb_control_msg_recv() calls can return
an error if a "short" write/read happens, and they can handle data off
of the stack, so move the driver over to using those calls instead,
saving some logic when dynamically allocating memory.

v2: changed API of use usb_control_msg_send() and usb_control_msg_recv()

Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Link: https://lore.kernel.org/r/20200914153756.3412156-11-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200923134348.23862-15-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sound: hiface: move to use usb_control_msg_send()

The usb_control_msg_send() call can return an error if a "short" write
happens, so move the driver over to using that call instead.

v2: API change of use usb_control_msg_send()

Cc: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200914153756.3412156-10-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200923134348.23862-14-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sound: line6: move to use usb_control_msg_send() and usb_control_msg_recv()

The usb_control_msg_send() and usb_control_msg_recv() calls can return
an error if a "short" write/read happens, and they can handle data off
of the stack, so move the driver over to using those calls instead,
saving some logic when dynamically allocating memory.

v2: API change of use usb_control_msg_send() and usb_control_msg_recv()

Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200914153756.3412156-9-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200923134348.23862-13-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: legousbtower: use usb_control_msg_recv()

The usb_control_msg_recv() function can handle data on the stack, as
well as properly detecting short reads, so move to use that function
instead of the older usb_control_msg() call.  This ends up removing a
lot of extra lines in the driver.

v2: change API of usb_control_msg_send()

Cc: Juergen Stuber <starblue@users.sourceforge.net>
Link: https://lore.kernel.org/r/20200914153756.3412156-6-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200923134348.23862-12-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sound: 6fire: move to use usb_control_msg_send() and usb_control_msg_recv()

The usb_control_msg_send() and usb_control_msg_recv() calls can return
an error if a "short" write/read happens, so move the driver over to
using those calls instead, saving some logic in the wrapper functions
that were being used in this driver.

This also resolves a long-staging bug where data on the stack was being
sent in a USB control message, which was not allowed.

v2: API change of usb_control_msg_send()

Cc: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200914153756.3412156-8-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200923134348.23862-11-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sound: usx2y: move to use usb_control_msg_send()

The usb_control_msg_send() call can handle data on the stack, as well as
returning an error if a "short" write happens, so move the driver over
to using that call instead.  This ends up removing a helper function
that is no longer needed.

v2: API change in usb_control_msg_send()

Cc: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200914153756.3412156-7-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200923134348.23862-10-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: correct API of usb_control_msg_send/recv

They need to specify how memory is to be allocated,
as control messages need to work in contexts that require GFP_NOIO.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20200923134348.23862-9-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "USB: legousbtower: use usb_control_msg_recv()"

This reverts commit be40c366416bf6ff74b25fd02e38cb6eaba497d1.
The API has to be changed.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20200923134348.23862-8-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "sound: usx2y: move to use usb_control_msg_send()"

This reverts commit ec8eeceb06b7a6efb6d924fd2f4ba4ec79ddc7bf.
The API has to be changed.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20200923134348.23862-7-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "sound: 6fire: move to use usb_control_msg_send() and usb_control_msg_recv()"

This reverts commit aea67cc1418252d07b9b56688f1b5fa70fcae813.
The API has to be changed.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20200923134348.23862-6-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "sound: line6: move to use usb_control_msg_send() and usb_control_msg_recv()"

This reverts commit f7ef7614f89e943d7511ee121b0b849f27b60cb2.
The API has to be changed.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20200923134348.23862-5-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "sound: hiface: move to use usb_control_msg_send()"

This reverts commit 119ae38a5cdfbefdf926b34fbf65cd60dc82c95e.
The API has to be changed.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20200923134348.23862-4-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "Bluetooth: ath3k: use usb_control_msg_send() and usb_control_msg_recv()"

This reverts commit e9b20f0fe17ab06c3b55153046209987749daa48.
The API has to be changed

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20200923134348.23862-3-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "USB: core: hub.c: use usb_control_msg_send() in a few places"

This reverts commit d6a499249543356002a1efbb26254c7272e62f4c.
Control messages are needed in contexts when memory allocations
are restricted, such as handling device resets and runtime PM.

For this reason the control message API internally uses GFP_NOIO.
This is a band aid introduced because when we recognized the issue,
the call chains were highly convoluted. Continuing this trend
is not a good idea.

So I am shooting the whole kennel here.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20200923134348.23862-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iopoll: update kerneldoc of read_poll_timeout_atomic()

Arguments description of read_poll_timeout_atomic() is out of date,
update it.

Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1600668815-12135-11-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: udc: net2280: convert to readl_poll_timeout_atomic()

Use readl_poll_timeout_atomic() to simplify code

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Felipe Balbi <balbi@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1600668815-12135-10-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: phy: phy-mv-usb: convert to readl_poll_timeout_atomic()

Use readl_poll_timeout_atomic() to simplify code

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1600668815-12135-9-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: phy-ulpi-viewport: convert to readl_poll_timeout_atomic()

Use readl_poll_timeout_atomic() to simplify code

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1600668815-12135-8-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: isp1760-hcd: convert to readl_poll_timeout_atomic()

Use readl_poll_timeout_atomic() to simplify code

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1600668815-12135-7-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: fotg210-hcd: convert to readl_poll_timeout_atomic()

Use readl_poll_timeout_atomic() to simplify code

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1600668815-12135-6-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: oxu210hp-hcd: convert to readl_poll_timeout_atomic()

Use readl_poll_timeout_atomic() to simplify code

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1600668815-12135-5-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci-rcar: convert to readl_poll_timeout_atomic()

Use readl_poll_timeout_atomic() to simplify code

Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1600668815-12135-4-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: pci-quirks: convert to readl_poll_timeout_atomic()

Use readl_poll_timeout_atomic() to simplify code

Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1600668815-12135-3-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: early: ehci-dbgp: convert to readl_poll_timeout_atomic()

Use readl_poll_timeout_atomic() to simplify code

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1600668815-12135-2-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: early: convert to readl_poll_timeout_atomic()

Use readl_poll_timeout_atomic() to simplify code

Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1600668815-12135-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: phy: ti,phy-j721e-wiz: fix bindings for torrent phy

When WIZ wraps a Cadence Torrent PHY (instead of Cadence Sierra PHY)
there is a difference in the refclk-dig node: Torrent only has two
clocks instead of Sierra's four clocks. Add minItems: 2 to solve this.

Additionally, in our use case we only need to use assigned-clock for a
single clock, but the current binding requires either no assigned-clocks
or two. Fix this by adding minItems: 1 to all the assigned-clock
properties.

There was also an extra trailing whitespace, which this patch removes.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://lore.kernel.org/r/20200918083743.213874-2-tomi.valkeinen@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: cdns,torrent-phy: add reset-names

Add reset-names as a required property.

There are no dts files using torrent phy yet, so it is safe to add a new
required property.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://lore.kernel.org/r/20200918083743.213874-1-tomi.valkeinen@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: rockchip-dphy-rx0: Include linux/delay.h

Fix an implicit declaration of usleep_range():

drivers/phy/rockchip/phy-rockchip-dphy-rx0.c: In function 'rk_dphy_enable':
drivers/phy/rockchip/phy-rockchip-dphy-rx0.c:203:2: error: implicit declaration of function 'usleep_range' [-Werror=implicit-function-declaration]

Fixes: 32abcc4491c62 ("media: staging: phy-rockchip-dphy-rx0: add Rockchip MIPI Synopsys DPHY RX0 driver")
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20200921225618.52529-1-tfiga@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: fix USB_LGM_PHY warning & build errors

Fix a Kconfig warning that is causing lots of build errors
when USB_SUPPORT is not set.

USB_PHY depends on USB_SUPPORT but "select" doesn't care about
dependencies, so this driver should also depend on USB_SUPPORT.
It should not select USB_SUPPORT.

WARNING: unmet direct dependencies detected for USB_PHY
  Depends on [n]: USB_SUPPORT [=n]
  Selected by [m]:
  - USB_LGM_PHY [=m]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Li Yin <yin1.li@intel.com>
Cc: Vadivel Murugan R <vadivel.muruganx.ramuthevar@linux.intel.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/d1dd0ddd-3143-5777-1c63-195e1a32f237@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: usb: renesas,usbhs: Add r8a774e1 support

Document RZ/G2H (R8A774E1) SoC bindings.

Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594919915-5225-12-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: usb: renesas, usb3-peri: Document r8a774e1 support

Document RZ/G2H (R8A774E1) SoC bindings.

Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594919915-5225-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: appledisplay: use module_usb_driver to simplify the code

module_usb_driver() makes the code simpler by eliminating
boilerplate code.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20200918031012.3980558-1-liushixin2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: bcma: use module_bcma_driver to simplify the code

module_bcma_driver() makes the code simpler by eliminating
boilerplate code.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20200918030830.3946254-1-liushixin2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'usb-ci-v5.10-rc1' of git://git./linux/kernel/git/peter.chen/usb into usb-next

Peter writes:

Two changes for chipidea imx driver:
- Add picophy parameter tuning interface
- Restore pinctrl for system suspend/resume

* tag 'usb-ci-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb:
  usb: chipidea: ci_hdrc_imx: restore pinctrl
  usb: chipidea: imx: add two samsung picophy parameters tuning implementation
  doc: dt-binding: ci-hdrc-usb2: add property for samsung picophy

Merge a31128384dfd ("Merge tag 'libnvdimm-fixes-5.9-rc7' of git://git./linux/kernel/git/nvdimm/nvdimm") into usb-next

We need the dax build fix in here as well, so that the build does not
break.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'libnvdimm-fixes-5.9-rc7' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fix from Dan Williams:
 "Fix compilation for the new dax_supported() exported helper"

* tag 'libnvdimm-fixes-5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: Fix compilation for CONFIG_DAX && !CONFIG_FS_DAX

dax: Fix compilation for CONFIG_DAX && !CONFIG_FS_DAX

dax_supported() is defined whenever CONFIG_DAX is enabled. So dummy
implementation should be defined only in !CONFIG_DAX case, not in
!CONFIG_FS_DAX case.

Fixes: e2ec51282545 ("dm: Call proper helper to determine dax support")
Cc: <stable@vger.kernel.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Merge 5.0-rc6 into usb-next

We want the USB fixes in here, and this resolves a merge issue in the
uas driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.9-rc6

Merge tag 'core_urgent_for_v5.9_rc6' of git://git./linux/kernel/git/tip/tip

Pull syscall tracing fix from Borislav Petkov:
 "Fix the seccomp syscall rewriting so that trace and audit see the
  rewritten syscall number, from Kees Cook"

* tag 'core_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  core/entry: Report syscall correctly for trace and audit

Merge tag 'objtool_urgent_for_v5.9_rc6' of git://git./linux/kernel/git/tip/tip

Pull objtool fix from Borislav Petkov:
 "Fix noreturn detection for ignored sibling functions (Josh Poimboeuf)"

* tag 'objtool_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix noreturn detection for ignored functions

Merge tag 'locking_urgent_for_v5.9_rc6' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Borislav Petkov:
 "Two fixes from the locking/urgent pile:

   - Fix lockdep's detection of "USED" <- "IN-NMI" inversions (Peter
     Zijlstra)

   - Make percpu-rwsem operations on the semaphore's ->read_count
     IRQ-safe because it can be used in an IRQ context (Hou Tao)"

* tag 'locking_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/percpu-rwsem: Use this_cpu_{inc,dec}() for read_count
  locking/lockdep: Fix "USED" <- "IN-NMI" inversions

Merge tag 'efi-urgent-for-v5.9-rc5' of git://git./linux/kernel/git/tip/tip

Pull EFI fix from Borislav Petkov:
 "Ensure that the EFI bootloader control module only probes successfully
  on systems that support the EFI SetVariable runtime service"

[ Tag and commit from Ard Biesheuvel, forwarded by Borislav ]

* tag 'efi-urgent-for-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: efibc: check for efivars write capability

Merge tag 'x86_urgent_for_v5.9_rc6' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

 - A defconfig fix (Daniel Díaz)

 - Disable relocation relaxation for the compressed kernel when not
   built as -pie as in that case kernels built with clang and linked
   with LLD fail to boot due to the linker optimizing some instructions
   in non-PIE form; the gory details in the commit message (Arvind
   Sankar)

 - A fix for the "bad bp value" warning issued by the frame-pointer
   unwinder (Josh Poimboeuf)

* tag 'x86_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/fp: Fix FP unwinding in ret_from_fork
  x86/boot/compressed: Disable relocation relaxation
  x86/defconfigs: Explicitly unset CONFIG_64BIT in i386_defconfig

Merge tag 'libnvdimm-fixes-5.9-rc6' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:
 "A handful of fixes to address a string of mistakes in the mechanism
  for device-mapper to determine if its component devices are dax
  capable.

   - Fix an original bug in device-mapper table reference counting when
     interrogating dax capability in the component device. This bug was
     hidden by the following bug.

   - Fix device-mapper to use the proper helper (dax_supported() instead
     of the leaf helper generic_fsdax_supported()) to determine dax
     operation of a stacked block device configuration. The original
     implementation is only valid for one level of dax-capable block
     device stacking. This bug was discovered while fixing the below
     regression.

   - Fix an infinite recursion regression introduced by broken attempts
     to quiet the generic_fsdax_supported() path and make it bail out
     before logging "dax capability not found" errors"

* tag 'libnvdimm-fixes-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: Fix stack overflow when mounting fsdax pmem device
  dm: Call proper helper to determine dax support
  dm/dax: Fix table reference counts

Merge tag 'riscv-for-linus-5.9-rc6' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix for a lockdep issue to avoid an asserting triggering during
   early boot. There shouldn't be any incorrect behavior as the system
   isn't concurrent at the time.

 - The addition of a missing fence when installing early fixmap
   mappings.

 - A corretion to the K210 device tree's interrupt map.

 - A fix for M-mode timer handling on the K210.

* tag 'riscv-for-linus-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Resurrect the MMIO timer implementation for M-mode systems
  riscv: Fix Kendryte K210 device tree
  riscv: Add sfence.vma after early page table changes
  RISC-V: Take text_mutex in ftrace_init_nop()

Merge tag 'usb-5.9-rc6' of git://git./linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt fixes from Greg KH:
 "Here are some small USB and one Thunderbolt driver fixes.

  Nothing major at all, just some fixes for reported issues, and a quirk
  addition:

   - typec fixes

   - UAS disconnect fix

   - usblp race fix

   - ehci-hcd modversions build fix

   - ignore wakeup quirk table addition

   - thunderbolt DROM read fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usblp: fix race between disconnect() and read()
  ehci-hcd: Move include to keep CRC stable
  usb: typec: intel_pmc_mux: Handle SCU IPC error conditions
  USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook
  USB: UAS: fix disconnect by unplugging a hub
  usb: typec: ucsi: Prevent mode overrun
  usb: typec: ucsi: acpi: Increase command completion timeout value
  thunderbolt: Retry DROM read once if parsing fails

Merge tag 'tty-5.9-rc6' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial/fbcon fixes from Greg KH:
 "Here are some small tty/serial and one more fbcon fix.

  They include:

   - serial core locking regression fixes

   - new device ids for 8250_pci driver

   - fbcon fix for syzbot found issue

  All have been in linux-next with no reported issues"

* tag 'tty-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  fbcon: Fix user font detection test at fbcon_resize().
  serial: 8250_pci: Add Realtek 816a and 816b
  serial: core: fix console port-lock regression
  serial: core: fix port-lock initialisation

Merge tag 'edac_urgent_for_v5.9_rc6' of git://git./linux/kernel/git/ras/ras

Pull EDAC fixes from Borislav Petkov:
 "Two fixes for resulting from CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
  experiments:

   - complete a previous fix to reset a local structure containing
     scanned system data properly so that the driver rescans, as it
     should, on a second load.

   - address a refcount underflow due to not paying attention to the
     driver whitelest on unregister"

* tag 'edac_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/ghes: Check whether the driver is on the safe list correctly
  EDAC/ghes: Clear scanned data on unload

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:
 "Just a couple of driver quirks"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: trackpoint - add new trackpoint variant IDs
  Input: i8042 - add Entroware Proteus EL07R4 to nomux and reset lists

mm: fix wake_page_function() comment typos

Sedat Dilek pointed out some silly comment typo issues.

Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'kbuild-fixes-v5.9-3' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:
 "Fix qconf warnings and revive help message"

* tag 'kbuild-fixes-v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: qconf: revive help message in the info view
  kconfig: qconf: fix incomplete type 'struct gstr' warning
  kconfig: qconf: use delete[] instead of delete to free array (again)

dax: Fix stack overflow when mounting fsdax pmem device

When mounting fsdax pmem device, commit 6180bb446ab6 ("dax: fix
detection of dax support for non-persistent memory block devices")
introduces the stack overflow [1][2]. Here is the call path for
mounting ext4 file system:
  ext4_fill_super
    bdev_dax_supported
      __bdev_dax_supported
        dax_supported
          generic_fsdax_supported
            __generic_fsdax_supported
              bdev_dax_supported

The call path leads to the infinite calling loop, so we cannot
call bdev_dax_supported() in __generic_fsdax_supported(). The sanity
checking of the variable 'dax_dev' is moved prior to the two
bdev_dax_pgoff() checks [3][4].

[1] https://lore.kernel.org/linux-nvdimm/1420999447.1004543.1600055488770.JavaMail.zimbra@redhat.com/
[2] https://lore.kernel.org/linux-nvdimm/alpine.LRH.2.02.2009141131220.30651@file01.intranet.prod.int.rdu2.redhat.com/
[3] https://lore.kernel.org/linux-nvdimm/CA+RJvhxBHriCuJhm-D8NvJRe3h2MLM+ZMFgjeJjrRPerMRLvdg@mail.gmail.com/
[4] https://lore.kernel.org/linux-nvdimm/20200903160608.GU878166@iweiny-DESK2.sc.intel.com/

Fixes: 6180bb446ab6 ("dax: fix detection of dax support for non-persistent memory block devices")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com>
Cc: Coly Li <colyli@suse.de>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: John Pittman <jpittman@redhat.com>
Link: https://lore.kernel.org/r/20200917111549.6367-1-adrianhuang0701@gmail.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dm: Call proper helper to determine dax support

DM was calling generic_fsdax_supported() to determine whether a device
referenced in the DM table supports DAX. However this is a helper for "leaf" device drivers so that
they don't have to duplicate common generic checks. High level code
should call dax_supported() helper which that calls into appropriate
helper for the particular device. This problem manifested itself as
kernel messages:

dm-3: error: dax access failed (-95)

when lvm2-testsuite run in cases where a DM device was stacked on top of
another DM device.

Fixes: 7bf7eac8d648 ("dax: Arrange for dax_supported check to span multiple devices")
Cc: <stable@vger.kernel.org>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/160061715195.13131.5503173247632041975.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dm/dax: Fix table reference counts

A recent fix to the dm_dax_supported() flow uncovered a latent bug. When
dm_get_live_table() fails it is still required to drop the
srcu_read_lock(). Without this change the lvm2 test-suite triggers this
warning:

    # lvm2-testsuite --only pvmove-abort-all.sh

    WARNING: lock held when returning to user space!
    5.9.0-rc5+ #251 Tainted: G           OE
    ------------------------------------------------
    lvm/1318 is leaving the kernel with locks still held!
    1 lock held by lvm/1318:
     #0: ffff9372abb5a340 (&md->io_barrier){....}-{0:0}, at: dm_get_live_table+0x5/0xb0 [dm_mod]

...and later on this hang signature:

    INFO: task lvm:1344 blocked for more than 122 seconds.
          Tainted: G           OE     5.9.0-rc5+ #251
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    task:lvm             state:D stack:    0 pid: 1344 ppid:     1 flags:0x00004000
    Call Trace:
     __schedule+0x45f/0xa80
     ? finish_task_switch+0x249/0x2c0
     ? wait_for_completion+0x86/0x110
     schedule+0x5f/0xd0
     schedule_timeout+0x212/0x2a0
     ? __schedule+0x467/0xa80
     ? wait_for_completion+0x86/0x110
     wait_for_completion+0xb0/0x110
     __synchronize_srcu+0xd1/0x160
     ? __bpf_trace_rcu_utilization+0x10/0x10
     __dm_suspend+0x6d/0x210 [dm_mod]
     dm_suspend+0xf6/0x140 [dm_mod]

Fixes: 7bf7eac8d648 ("dax: Arrange for dax_supported check to span multiple devices")
Cc: <stable@vger.kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Reported-by: Adrian Huang <ahuang12@lenovo.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Link: https://lore.kernel.org/r/160045867590.25663.7548541079217827340.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

usb: xhci: add debugfs support for ep with stream

To show the trb ring of streams, use the exsiting ring files of bulk ep
to show trb ring of one specific stream ID, which stream ID's trb ring
will be shown, is controlled by a new debugfs file stream_id, this is to
avoid to create a large number of dir for every allocate stream IDs,
another debugfs file stream_context_array is created to show all the
allocated stream context array entries.

Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-11-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: don't create endpoint debugfs entry before ring buffer is set.

Make sure xHC completes the configure endpoint command and xhci driver
sets the ring pointers correctly before we create the user readable
debugfs file.

In theory there was a small gap where a user could have read the
debugfs file and cause a NULL pointer dereference error as ring
pointer was not yet set, in practise we want this change to simplify
the upcoming streams debugfs support.

Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Tune interrupt blocking for isochronous transfers

controllers with XHCI_AVOID_BEI quirk cause too frequent interrupts
and affect power management.

To avoid interrupting on every isochronous interval the BEI (Block
Event Interrupt) flag is set for all except the last Isoch TRB in a URB.
This lead to event ring filling up in case several isoc URB were
queued and cancelled rapidly, which some controllers didn't
handle well, and thus the XHCI_AVOID_BEI quirk was introduced.
see commit 227a4fd801c8 ("usb: xhci: apply XHCI_AVOID_BEI quirk to all
Intel xHCI controllers")

With the XHCI_AVOID_BEI quirk each Isoch TRB will trigger an interrupt.
This can cause up to 8000 interrupts per second for isochronous transfers
with HD USB3 cameras, affecting power saving.

The event ring fits 256 events, instead of interrupting on every
isochronous TRB if XHCI_AVOID_BEI is set we make sure at least every
8th Isochronous TRB asserts an interrupt, clearing the event ring.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: omit duplicate actions when suspending a runtime suspended host.

If the xhci-plat.c is the platform driver, after the runtime pm is
enabled, the xhci_suspend is called if nothing is connected on
the port. When the system goes to suspend, it will call xhci_suspend again
if USB wakeup is enabled.

Since the runtime suspend wakeup setting is not always the same as
system suspend wakeup setting, eg, at runtime suspend we always need
wakeup if the controller is in low power mode; but at system suspend,
we may not need wakeup. So, we move the judgement after changing
wakeup setting.

[commit message rewording -Mathias]

Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-plat: improve the comments for xhci_plat_suspend

To reflect the current code status.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-plat: add wakeup entry at sysfs

With this change, there will be a wakeup entry at /sys/../power/wakeup,
and the user could use this entry to choose whether enable xhci wakeup
features (wake up system from suspend) or not.

Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-plat: add priv quirk for skip PHY initialization

Some DRD controllers (eg, dwc3 & cdns3) have PHY management at
their own driver to cover both device and host mode, so add one
priv quirk for such users to skip PHY management from HCD core.

Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-plat: delete the unnecessary code

The if {} condition is duplicated with outer if {} condition.

Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-plat: add .suspend_quirk for struct xhci_plat_priv

Some platforms (eg cdns3) may have special sequences between
xhci_bus_suspend and xhci_suspend, add .suspend_quick for it.

Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-plat: add platform data support

Some xhci hosts (eg dwc3 and cdns3) do not use OF to create
platform device, they create xhci-plat platform device runtime.
And these platforms may also have quirks, and the quirks could
be supplied by their parent device through platform data.

Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kconfig: qconf: revive help message in the info view

Since commit 68fd110b3e7e ("kconfig: qconf: remove redundant help in
the info view"), the help message is no longer displayed.

I intended to drop duplicated "Symbol:", "Type:", but precious info
about help and reverse dependencies was lost too.

Revive it now.

"defined at" is contained in menu_get_ext_help(), so I made sure
to not display it twice.

Fixes: 68fd110b3e7e ("kconfig: qconf: remove redundant help in the info view")
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

kconfig: qconf: fix incomplete type 'struct gstr' warning

"make HOSTCXX=clang++ xconfig" reports the following:

  HOSTCXX scripts/kconfig/qconf.o
In file included from scripts/kconfig/qconf.cc:23:
In file included from scripts/kconfig/lkc.h:15:
scripts/kconfig/lkc_proto.h:26:13: warning: 'get_relations_str' has C-linkage specified, but returns incomplete type 'struct gstr' which could be incompatible with C [-Wreturn-type-c-linkage]
struct gstr get_relations_str(struct symbol **sym_arr, struct list_head *head);
            ^

Currently, get_relations_str() is declared before the struct gstr
definition.

Move all declarations of menu.c functions below.

BTW, some are declared in lkc.h and some in lkc_proto.h, but the
difference is unclear. I guess some refactoring is needed.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Boris Kolpackov <boris@codesynthesis.com>

Merge branch 'akpm' (patches from Andrew)

Merge fixes from Andrew Morton:
 "15 patches.

  Subsystems affected by this patch series: mailmap, mm/hotfixes,
  mm/thp, mm/memory-hotplug, misc, kcsan"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kcsan: kconfig: move to menu 'Generic Kernel Debugging Instruments'
  fs/fs-writeback.c: adjust dirtytime_interval_handler definition to match prototype
  stackleak: let stack_erasing_sysctl take a kernel pointer buffer
  ftrace: let ftrace_enable_sysctl take a kernel pointer buffer
  mm/memory_hotplug: drain per-cpu pages again during memory offline
  selftests/vm: fix display of page size in map_hugetlb
  mm/thp: fix __split_huge_pmd_locked() for migration PMD
  kprobes: fix kill kprobe which has been marked as gone
  tmpfs: restore functionality of nr_inodes=0
  mlock: fix unevictable_pgs event counts on THP
  mm: fix check_move_unevictable_pages() on THP
  mm: migration of hugetlbfs page skip memcg
  ksm: reinstate memcg charge on copied pages
  mailmap: add older email addresses for Kees Cook

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Another bunch of fixes for I2C.

  Jean's i801 patch is a cleanup on top of Volker's i801 patch, but it
  will make dependency handling much easier if those two go together"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACK
  i2c: mediatek: Send i2c master code at more than 1MHz
  i2c: mediatek: Fix generic definitions for bus frequency
  i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()
  i2c: i801: Simplify the suspend callback
  i2c: i801: Fix resume bug
  i2c: aspeed: Mask IRQ status to relevant bits

RISC-V: Resurrect the MMIO timer implementation for M-mode systems

The K210 doesn't implement rdtime in M-mode, and since that's where Linux runs
in the NOMMU systems that means we can't use rdtime.  The K210 is the only
system that anyone is currently running NOMMU or M-mode on, so here we're just
inlining the timer read directly.

This also adds the CLINT driver as an !MMU dependency, as it's currently the
only timer driver availiable for these systems and without it we get a build
failure for some configurations.

Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

riscv: Fix Kendryte K210 device tree

The Kendryte K210 SoC CLINT is compatible with Sifive clint v0
(sifive,clint0). Fix the Kendryte K210 device tree clint entry to be
inline with the sifive timer definition documented in
Documentation/devicetree/bindings/timer/sifive,clint.yaml.
The device tree clint entry is renamed similarly to u-boot device tree
definition to improve compatibility with u-boot defined device tree.
To ensure correct initialization, the interrup-cells attribute is added
and the interrupt-extended attribute definition fixed.

This fixes boot failures with Kendryte K210 SoC boards.

Note that the clock referenced is kept as K210_CLK_ACLK, which does not
necessarilly match the clint MTIME increment rate. This however does not
seem to cause any problem for now.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

riscv: Add sfence.vma after early page table changes

This invalidates local TLB after modifying the page tables during early init as
it's too early to handle suprious faults as we otherwise do.

Fixes: f2c17aabc917 ("RISC-V: Implement compile-time fixed mappings")
Reported-by: Syven Wang <syven.wang@sifive.com>
Signed-off-by: Syven Wang <syven.wang@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[Palmer: Cleaned up the commit text]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

kcsan: kconfig: move to menu 'Generic Kernel Debugging Instruments'

This moves the KCSAN kconfig items under menu 'Generic Kernel Debugging
Instruments' where UBSAN resides.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200904152224.5570-1-changbin.du@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/fs-writeback.c: adjust dirtytime_interval_handler definition to match prototype

Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer.  Adjust the
definition of dirtytime_interval_handler to match its prototype in
linux/writeback.h which fixes the following sparse error/warning:

fs/fs-writeback.c:2189:50: warning: incorrect type in argument 3 (different address spaces)
fs/fs-writeback.c:2189:50:    expected void *
fs/fs-writeback.c:2189:50:    got void [noderef] __user *buffer
fs/fs-writeback.c:2184:5: error: symbol 'dirtytime_interval_handler' redeclared with different type (incompatible argument 3 (different address spaces)):
fs/fs-writeback.c:2184:5:    int extern [addressable] [signed] [toplevel] dirtytime_interval_handler( ... )
fs/fs-writeback.c: note: in included file:
./include/linux/writeback.h:374:5: note: previously declared as:
./include/linux/writeback.h:374:5:    int extern [addressable] [signed] [toplevel] dirtytime_interval_handler( ... )

Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20200907093140.13434-1-tklauser@distanz.ch
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>