Dennis Zhou [Sat, 14 Dec 2019 00:22:13 +0000 (16:22 -0800)]
btrfs: keep track of free space bitmap trim status cleanliness
There is a cap in btrfs in the amount of free extents that a block group
can have. When it surpasses that threshold, future extents are placed
into bitmaps. Instead of keeping track of if a certain bit is trimmed or
not in a second bitmap, keep track of the relative state of the bitmap.
With async discard, trimming bitmaps becomes a more frequent operation.
As a trade off with simplicity, we keep track of if discarding a bitmap
is in progress. If we fully scan a bitmap and trim as necessary, the
bitmap is marked clean. This has some caveats as the min block size may
skip over regions deemed too small. But this should be a reasonable
trade off rather than keeping a second bitmap and making allocation
paths more complex. The downside is we may overtrim, but ideally the min
block size should prevent us from doing that too often and getting stuck
trimming pathological cases.
BTRFS_TRIM_STATE_TRIMMING is added to indicate a bitmap is in the
process of being trimmed. If additional free space is added to that
bitmap, the bit is cleared. A bitmap will be marked
BTRFS_TRIM_STATE_TRIMMED if the trimming code was able to reach the end
of it and the former is still set.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dennis Zhou [Sat, 14 Dec 2019 00:22:12 +0000 (16:22 -0800)]
btrfs: keep track of which extents have been discarded
Async discard will use the free space cache as backing knowledge for
which extents to discard. This patch plumbs knowledge about which
extents need to be discarded into the free space cache from
unpin_extent_range().
An untrimmed extent can merge with everything as this is a new region.
Absorbing trimmed extents is a tradeoff to for greater coalescing which
makes life better for find_free_extent(). Additionally, it seems the
size of a trim isn't as problematic as the trim io itself.
When reading in the free space cache from disk, if sync is set, mark all
extents as trimmed. The current code ensures at transaction commit that
all free space is trimmed when sync is set, so this reflects that.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dennis Zhou [Sat, 14 Dec 2019 00:22:11 +0000 (16:22 -0800)]
btrfs: rename DISCARD mount option to to DISCARD_SYNC
This series introduces async discard which will use the flag
DISCARD_ASYNC, so rename the original flag to DISCARD_SYNC as it is
synchronously done in transaction commit.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dennis Zhou [Sat, 14 Dec 2019 00:22:10 +0000 (16:22 -0800)]
bitmap: genericize percpu bitmap region iterators
Bitmaps are fairly popular for their space efficiency, but we don't have
generic iterators available. Make percpu's bitmap region iterators
available to everyone.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Mon, 9 Dec 2019 10:54:35 +0000 (18:54 +0800)]
btrfs: tree-checker: Verify location key for DIR_ITEM/DIR_INDEX
[PROBLEM]
There is a user report in the mail list, showing the following corrupted
tree blocks:
item 62 key (486836 DIR_ITEM
2543451757) itemoff 6273 itemsize 74
location key (4065004 INODE_ITEM
1073741824) type FILE
transid 21397 data_len 0 name_len 44
name: FILENAME
Note that location key, its offset should be 0 for all INODE_ITEMS.
This caused failed lookup of the inode.
[CAUSE]
That offending value,
1073741824, is 0x40000000. So this looks like a
memory bit flip.
[FIX]
This patch will enhance tree-checker to check location key of
DIR_INDEX/DIR_ITEM/XATTR_ITEM.
There are several different combinations needs to check:
- item_key.type == DIR_INDEX/DIR_ITEM
* location_key.type == BTRFS_INODE_ITEM_KEY
This location_key should follow the check in inode_item check.
* location_key.type == BTRFS_ROOT_ITEM_KEY
Despite the existing check, DIR_INDEX/DIR_ITEM can only points to
subvolume trees.
* All other keys are not allowed.
- item_key.type == XATTR_ITEM
location_key should be all 0.
Reported-by: Mike Gilbert <floppymaster@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Mon, 9 Dec 2019 10:54:34 +0000 (18:54 +0800)]
btrfs: tree-checker: Refactor root key check into separate function
ROOT_ITEM key check itself is not as simple as single line check, and
will be reused for both ROOT_ITEM and DIR_ITEM/DIR_INDEX location key
check, so refactor such check into check_root_key().
Also since we are here, fix a comment error about ROOT_ITEM offset,
which is transid of snapshot creation, not some "older kernel behavior".
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Mon, 9 Dec 2019 10:54:33 +0000 (18:54 +0800)]
btrfs: tree-checker: Refactor inode key check into seperate function
Inode key check is not as easy as several lines, and it will be called
in more than one location (INODE_ITEM check and
DIR_ITEM/DIR_INDEX/XATTR_ITEM location key check).
So here refactor such check into check_inode_key(). And add extra
checks for XATTR_ITEM.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Mon, 9 Dec 2019 10:54:32 +0000 (18:54 +0800)]
btrfs: tree-checker: Clean up fs_info parameter from error message wrapper
The @fs_info parameter can be extracted from extent_buffer structure,
and there are already some wrappers getting rid of the @fs_info
parameter.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 17 Dec 2019 10:58:20 +0000 (18:58 +0800)]
btrfs: tree-checker: Check leaf chunk item size
Inspired by btrfs-progs github issue #208, where chunk item in chunk
tree has invalid num_stripes (0).
Although that can already be caught by current btrfs_check_chunk_valid(),
that function doesn't really check item size as it needs to handle chunk
item in super block sys_chunk_array().
This patch will add two extra checks for chunk items in chunk tree:
- Basic chunk item size
If the item is smaller than btrfs_chunk (which already contains one
stripe), exit right now as reading num_stripes may even go beyond
eb boundary.
- Item size check against num_stripes
If item size doesn't match with calculated chunk size, then either the
item size or the num_stripes is corrupted. Error out anyway.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
zhengbin [Thu, 19 Dec 2019 09:25:34 +0000 (17:25 +0800)]
btrfs: Remove unneeded semicolon
Fixes coccicheck warning:
fs/btrfs/print-tree.c:320:3-4: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Tue, 3 Dec 2019 01:34:25 +0000 (17:34 -0800)]
btrfs: remove struct find_free_extent.ram_bytes
This hasn't been used since it was first introduced in commit
b4bd745d1230 ("btrfs: Introduce find_free_extent_ctl structure for later
rework"). Passing that to btrfs_add_reserved_bytes in find_free_extent
is not strictly necessary and using the local ram_bytes instead seems
cleaner.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Tue, 3 Dec 2019 01:34:24 +0000 (17:34 -0800)]
btrfs: simplify compressed/inline check in __extent_writepage_io()
Commit
7087a9d8db88 ("btrfs: Remove
extent_io_ops::writepage_end_io_hook") left this logic in a confusing
state. Simplify it.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Tue, 3 Dec 2019 01:34:23 +0000 (17:34 -0800)]
btrfs: drop create parameter to btrfs_get_extent()
We only pass this as 1 from __extent_writepage_io(). The parameter
basically means "pretend I didn't pass in a page". This is silly since
we can simply not pass in the page. Get rid of the parameter from
btrfs_get_extent(), and since it's used as a get_extent_t callback,
remove it from get_extent_t and btree_get_extent(), neither of which
need it.
While we're here, let's document btrfs_get_extent().
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Tue, 3 Dec 2019 01:34:22 +0000 (17:34 -0800)]
btrfs: remove redundant i_size check in __extent_writepage_io()
In __extent_writepage_io(), we check whether
i_size <= page_offset(page).
Note that if i_size < page_offset(page), then
i_size >> PAGE_SHIFT < page->index.
If i_size == page_offset(page), then
i_size >> PAGE_SHIFT == page->index && offset_in_page(i_size) == 0.
__extent_writepage() already has a check for these cases that
returns without calling __extent_writepage_io():
end_index = i_size >> PAGE_SHIFT
pg_offset = offset_in_page(i_size);
if (page->index > end_index ||
(page->index == end_index && !pg_offset)) {
page->mapping->a_ops->invalidatepage(page, 0, PAGE_SIZE);
unlock_page(page);
return 0;
}
Get rid of the one in __extent_writepage_io(), which was obsoleted in
211c17f51f46 ("Fix corners in writepage and btrfs_truncate_page").
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Tue, 3 Dec 2019 01:34:21 +0000 (17:34 -0800)]
btrfs: remove trivial goto label in __extent_writepage()
Since
40f765805f08 ("Btrfs: split up __extent_writepage to lower stack
usage"), done_unlocked is simply a return 0. Get rid of it.
Mid-statement block returns don seem to make the code less readable here.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Tue, 3 Dec 2019 01:34:20 +0000 (17:34 -0800)]
btrfs: remove unnecessary pg_offset assignments in __extent_writepage()
We're initializing pg_offset to 0, setting it immediately, then
reassigning it to 0 again after. The former became unnecessary in
211c17f51f46 ("Fix corners in writepage and btrfs_truncate_page"). The
latter is a leftover that should've been removed in
40f765805f08
("Btrfs: split up __extent_writepage to lower stack usage"). Remove
both.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Tue, 3 Dec 2019 01:34:19 +0000 (17:34 -0800)]
btrfs: make btrfs_ordered_extent naming consistent with btrfs_file_extent_item
ordered->start, ordered->len, and ordered->disk_len correspond to
fi->disk_bytenr, fi->num_bytes, and fi->disk_num_bytes, respectively.
It's confusing to translate between the two naming schemes. Since a
btrfs_ordered_extent is basically a pending btrfs_file_extent_item,
let's make the former use the naming from the latter.
Note that I didn't touch the names in tracepoints just in case there are
scripts depending on the current naming.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Tue, 3 Dec 2019 01:34:18 +0000 (17:34 -0800)]
btrfs: remove dead snapshot-aware defrag code
Snapshot-aware defrag has been disabled since commit
8101c8dbf624
("Btrfs: disable snapshot aware defrag for now") almost 6 years ago.
Let's remove the dead code. If someone is up to the task of bringing it
back, they can dig it up from git.
This is logically a revert of commit
38c227d87c49 ("Btrfs:
snapshot-aware defrag") except that now we have to clear the
EXTENT_DEFRAG bit to avoid need_force_cow() returning true forever.
The reasons to disable were caused by runtime problems (like long stalls
or memory consumption) on heavily referenced extents (eg. thousands of
snapshots). There were attempts to fix that but never finished.
Current defrag breaks the extent references and some users prefer that
behaviour over the one implemented by snapshot aware (ie. keeping links
for defragmentation). To enable both usecases we'd need to extend
defrag ioctl but let's do that properly from scratch.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ enhance ]
Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Tue, 10 Dec 2019 18:37:35 +0000 (10:37 -0800)]
btrfs: get rid of at_offset parameter to btrfs_lookup_bio_sums()
We can encode this in the offset parameter: -1 means use the page
offsets, anything else is a valid offset.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Tue, 3 Dec 2019 01:34:17 +0000 (17:34 -0800)]
btrfs: get rid of trivial __btrfs_lookup_bio_sums() wrappers
Currently, we have two wrappers for __btrfs_lookup_bio_sums():
btrfs_lookup_bio_sums_dio(), which is used for direct I/O, and
btrfs_lookup_bio_sums(), which is used everywhere else. The only
difference is that the _dio variant looks up csums starting at the given
offset instead of using the page index, which isn't actually direct
I/O-specific. Let's clean up the signature and return value of
__btrfs_lookup_bio_sums(), rename it to btrfs_lookup_bio_sums(), and get
rid of the trivial helpers.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Johannes Thumshirn [Wed, 4 Dec 2019 13:36:39 +0000 (14:36 +0100)]
btrfs: reset device back to allocation state when removing
When closing a device, btrfs_close_one_device() first allocates a new
device, copies the device to close's name, replaces it in the dev_list
with the copy and then finally frees it.
This involves two memory allocation, which can potentially fail. As this
code path is tricky to unwind, the allocation failures where handled by
BUG_ON()s.
But this copying isn't strictly needed, all that is needed is resetting
the device in question to it's state it had after the allocation.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Johannes Thumshirn [Tue, 26 Nov 2019 08:40:05 +0000 (09:40 +0100)]
btrfs: decrement number of open devices after closing the device not before
In btrfs_close_one_device we're decrementing the number of open devices
before we're calling btrfs_close_bdev().
As there is no intermediate exit between these points in this function it
is technically OK to do so, but it makes the code a bit harder to understand.
Move both operations closer together and move the decrement step after
btrfs_close_bdev().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Thu, 5 Dec 2019 18:36:04 +0000 (10:36 -0800)]
btrfs: use simple_dir_inode_operations for placeholder subvolume directory
When you snapshot a subvolume containing a subvolume, you get a
placeholder directory where the subvolume would be. These directories
have their own btrfs_dir_ro_inode_operations.
Al pointed out [1] that these directories can use simple_lookup()
instead of btrfs_lookup(), as they are always empty. Furthermore, they
can use the default generic_permission() instead of btrfs_permission();
the additional checks in the latter don't matter because we can't write
to the directory anyways. Finally, they can use the default
generic_update_time() instead of btrfs_update_time(), as the inode
doesn't exist on disk and doesn't need any special handling.
All together, this means that we can get rid of
btrfs_dir_ro_inode_operations and use simple_dir_inode_operations
instead.
1: https://lore.kernel.org/linux-btrfs/
20190929052934.GY26530@ZenIV.linux.org.uk/
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Johannes Thumshirn [Thu, 5 Dec 2019 13:19:59 +0000 (14:19 +0100)]
btrfs: remove impossible WARN_ON in btrfs_destroy_dev_replace_tgtdev()
We have a user report, that cppcheck is complaining about a possible
NULL-pointer dereference in btrfs_destroy_dev_replace_tgtdev().
We're first dereferencing the 'tgtdev' variable and the later check for
the validity of the pointer with a WARN_ON(!tgtdev);
But all callers of btrfs_destroy_dev_replace_tgtdev() either explicitly
check if 'tgtdev' is non-NULL or directly allocate 'tgtdev', so the
WARN_ON() is impossible to hit. Just remove it to silence the checker's
complains.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205003
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Johannes Thumshirn [Thu, 5 Dec 2019 13:19:58 +0000 (14:19 +0100)]
btrfs: remove superfluous BUG_ON() in integrity checks
btrfsic_process_superblock() BUG_ON()s if 'state' is NULL. But this can
never happen as the only caller from btrfsic_process_superblock() is
btrfsic_mount() which allocates 'state' some lines above calling
btrfsic_process_superblock() and checks for the allocation to succeed.
Let's just remove the impossible to hit BUG_ON().
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Johannes Thumshirn [Thu, 5 Dec 2019 13:19:57 +0000 (14:19 +0100)]
btrfs: fix possible NULL-pointer dereference in integrity checks
A user reports a possible NULL-pointer dereference in
btrfsic_process_superblock(). We are assigning state->fs_info to a local
fs_info variable and afterwards checking for the presence of state.
While we would BUG_ON() a NULL state anyways, we can also just remove
the local fs_info copy, as fs_info is only used once as the first
argument for btrfs_num_copies(). There we can just pass in
state->fs_info as well.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205003
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Tue, 26 Nov 2019 16:25:54 +0000 (11:25 -0500)]
btrfs: kill min_allocable_bytes in inc_block_group_ro
This is a relic from a time before we had a proper reservation mechanism
and you could end up with really full chunks at chunk allocation time.
This doesn't make sense anymore, so just kill it.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Tue, 26 Nov 2019 16:25:53 +0000 (11:25 -0500)]
btrfs: don't pass system_chunk into can_overcommit
We have the space_info, we can just check its flags to see if it's the
system chunk space info.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Fri, 29 Nov 2019 09:38:13 +0000 (11:38 +0200)]
btrfs: Opencode ordered_data_tree_panic
It's a simple wrapper over btrfs_panic and is called only once. Just
open code it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Fri, 29 Nov 2019 04:40:59 +0000 (12:40 +0800)]
btrfs: relocation: Output current relocation stage at btrfs_relocate_block_group()
There are two relocation stages but both print the same message. Add the
description of the stage. This can help debugging or provides
informative message to users.
BTRFS info (device dm-5): balance: start -d -m -s
BTRFS info (device dm-5): relocating block group
30408704 flags metadata|dup
BTRFS info (device dm-5): found 2 extents, stage: move data extents
BTRFS info (device dm-5): relocating block group
22020096 flags system|dup
BTRFS info (device dm-5): found 1 extents, stage: move data extents
BTRFS info (device dm-5): relocating block group
13631488 flags data
BTRFS info (device dm-5): found 1 extents, stage: move data extents
BTRFS info (device dm-5): found 1 extents, stage: update data pointers
BTRFS info (device dm-5): balance: ended with status: 0
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Yunfeng Ye [Tue, 3 Dec 2019 08:59:25 +0000 (16:59 +0800)]
btrfs: remove unused condition check in btrfs_page_mkwrite()
The condition '!ret2' is always true. commit
717beb96d969 ("Btrfs: fix
regression in btrfs_page_mkwrite() from vm_fault_t conversion") left
behind the check after moving this code out of the goto, so remove the
unused condition check.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 2 Dec 2019 09:40:14 +0000 (11:40 +0200)]
btrfs: Remove redundant WARN_ON in walk_down_log_tree
level <0 and level >= BTRFS_MAX_LEVEL are already performed upon
extent buffer read by tree checker in btrfs_check_node.
go. As far as 'level <= 0' we are guaranteed that level is '> 0'
because the value of level _before_ reading 'next' is larger than 1
(otherwise we wouldn't have executed that code at all) this in turn
guarantees that 'level' after btrfs_read_buffer is 'level - 1' since
we verify this invariant in:
btrfs_read_buffer
btree_read_extent_buffer_pages
btrfs_verify_level_key
This guarantees that level can never be '<= 0' so the warn on is
never triggered.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 2 Dec 2019 09:40:13 +0000 (11:40 +0200)]
btrfs: Remove WARN_ON in walk_log_tree
The log_root passed to walk_log_tree is guaranteed to have its
root_key.objectid always be BTRFS_TREE_LOG_OBJECTID. This is by
merit that all log roots of an ordinary root are allocated in
alloc_log_tree which hard-codes objectid to be BTRFS_TREE_LOG_OBJECTID.
In case walk_log_tree is called for a log tree found by btrfs_read_fs_root
in btrfs_recover_log_trees, that function already ensures
found_key.objectid is BTRFS_TREE_LOG_OBJECTID.
No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 21 Nov 2019 12:03:31 +0000 (14:03 +0200)]
btrfs: Rename __btrfs_free_reserved_extent to btrfs_pin_reserved_extent
__btrfs_free_reserved_extent now performs the actions of
btrfs_free_and_pin_reserved_extent. But this name is a bit of a
misnomer, since the extent is not really freed but just pinned. Reflect
this in the new name. No semantics changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 21 Nov 2019 12:03:30 +0000 (14:03 +0200)]
btrfs: Open code __btrfs_free_reserved_extent in btrfs_free_reserved_extent
__btrfs_free_reserved_extent performs 2 entirely different operations
depending on whether its 'pin' argument is true or false. This patch
lifts the 2nd case (pin is false) into it's sole caller
btrfs_free_reserved_extent. No semantics changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 21 Nov 2019 12:03:29 +0000 (14:03 +0200)]
btrfs: Don't discard unwritten extents
All callers of btrfs_free_reserved_extent (respectively
__btrfs_free_reserved_extent with in set to 0) pass in extents which
have only been reserved but not yet written to. Namely,
* in cow_file_range that function is called only if create_io_em fails
or btrfs_add_ordered_extent fail, both of which happen _before_ any IO
is submitted to the newly reserved range
* in submit_compressed_extents the code flow is similar -
out_free_reserve can be called only before
btrfs_submit_compressed_write which is where any writes to the range
could occur
* btrfs_new_extent_direct also calls btrfs_free_reserved_extent only
if extent_map fails, before any IO is issued
* __btrfs_prealloc_file_range also calls btrfs_free_reserved_extent
in case insertion of the metadata fails
* btrfs_alloc_tree_block again can only be called in case in-memory
operations fail, before any IO is submitted
* btrfs_finish_ordered_io - this is the only caller where discarding
the extent could have a material effect, since it can be called for
an extent which was partially written.
With this change the submission of discards is optimised since discards
are now not being created for extents which are known to not have been
touched on disk.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Marcos Paulo de Souza [Tue, 26 Nov 2019 00:58:51 +0000 (21:58 -0300)]
btrfs: qgroup: return ENOTCONN instead of EINVAL when quotas are not enabled
[PROBLEM]
qgroup create/remove code is currently returning EINVAL when the user
tries to create a qgroup on a subvolume without quota enabled. EINVAL is
already being used for too many error scenarios so that is hard to
depict what is the problem.
[FIX]
Currently scrub and balance code return -ENOTCONN when the user tries to
cancel/pause and no scrub or balance is currently running for the
desired subvolume. Do the same here by returning -ENOTCONN when a user
tries to create/delete/assing/list a qgroup on a subvolume without quota
enabled.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Marcos Paulo de Souza [Tue, 26 Nov 2019 00:58:50 +0000 (21:58 -0300)]
btrfs: qgroup: remove one-time use variables for quota_root checks
Remove some variables that are set only to be checked later, and never
used.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Thu, 21 Nov 2019 09:33:34 +0000 (17:33 +0800)]
btrfs: sysfs, merge btrfs_sysfs_add devices_kobj and fsid
Merge btrfs_sysfs_add_fsid() and btrfs_sysfs_add_devices_kobj() functions
as these two are small and they are called one after the other.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Thu, 21 Nov 2019 09:33:33 +0000 (17:33 +0800)]
btrfs: sysfs, rename btrfs_sysfs_add_device()
btrfs_sysfs_add_device() creates the directory
/sys/fs/btrfs/UUID/devices but its function name is misleading. Rename
it to btrfs_sysfs_add_devices_kobj() instead. No functional changes.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Thu, 21 Nov 2019 09:33:32 +0000 (17:33 +0800)]
btrfs: sysfs, btrfs_sysfs_add_fsid() drop unused argument parent
Commit
24bd69cb ("Btrfs: sysfs: add support to add parent for fsid")
added parent argument in preparation to show the seed fsid under the
sprout fsid as in the patch [1] in the mailing list.
[1] Btrfs: sysfs: support seed devices in the sysfs layout
But later this idea was superseded by another idea to rename the fsid as
in the commit
f93c39970b1d ("btrfs: factor out sysfs code for updating
sprout fsid").
So we don't need parent argument anymore.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Thu, 21 Nov 2019 09:33:30 +0000 (17:33 +0800)]
btrfs: sysfs, rename devices kobject holder to devices_kobj
The struct member btrfs_device::device_dir_kobj holds the kobj of the
sysfs directory /sys/fs/btrfs/UUID/devices, so rename it from
device_dir_kobj to devices_kobj. No functional changes.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 25 Nov 2019 14:34:48 +0000 (15:34 +0100)]
btrfs: fill ncopies for all raid table entries
Make the number of copies explicit even for entries that use the default
0 value for consistency.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 13 May 2019 23:59:54 +0000 (01:59 +0200)]
btrfs: use raid_attr table in calc_stripe_length for nparity
The table is already used for ncopies, replace open coding of stripes
with the raid_attr value.
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Tue, 19 Nov 2019 12:07:33 +0000 (12:07 +0000)]
Btrfs: fix missing hole after hole punching and fsync when using NO_HOLES
When using the NO_HOLES feature, if we punch a hole into a file and then
fsync it, there are cases where a subsequent fsync will miss the fact that
a hole was punched, resulting in the holes not existing after replaying
the log tree.
Essentially these cases all imply that, tree-log.c:copy_items(), is not
invoked for the leafs that delimit holes, because nothing changed those
leafs in the current transaction. And it's precisely copy_items() where
we currenly detect and log holes, which works as long as the holes are
between file extent items in the input leaf or between the beginning of
input leaf and the previous leaf or between the last item in the leaf
and the next leaf.
First example where we miss a hole:
*) The extent items of the inode span multiple leafs;
*) The punched hole covers a range that affects only the extent items of
the first leaf;
*) The fsync operation is done in full mode (BTRFS_INODE_NEEDS_FULL_SYNC
is set in the inode's runtime flags).
That results in the hole not existing after replaying the log tree.
For example, if the fs/subvolume tree has the following layout for a
particular inode:
Leaf N, generation 10:
[ ... INODE_ITEM INODE_REF EXTENT_ITEM (0 64K) EXTENT_ITEM (64K 128K) ]
Leaf N + 1, generation 10:
[ EXTENT_ITEM (128K 64K) ... ]
If at transaction 11 we punch a hole coverting the range [0, 128K[, we end
up dropping the two extent items from leaf N, but we don't touch the other
leaf, so we end up in the following state:
Leaf N, generation 11:
[ ... INODE_ITEM INODE_REF ]
Leaf N + 1, generation 10:
[ EXTENT_ITEM (128K 64K) ... ]
A full fsync after punching the hole will only process leaf N because it
was modified in the current transaction, but not leaf N + 1, since it
was not modified in the current transaction (generation 10 and not 11).
As a result the fsync will not log any holes, because it didn't process
any leaf with extent items.
Second example where we will miss a hole:
*) An inode as its items spanning 5 (or more) leafs;
*) A hole is punched and it covers only the extents items of the 3rd
leaf. This resulsts in deleting the entire leaf and not touching any
of the other leafs.
So the only leaf that is modified in the current transaction, when
punching the hole, is the first leaf, which contains the inode item.
During the full fsync, the only leaf that is passed to copy_items()
is that first leaf, and that's not enough for the hole detection
code in copy_items() to determine there's a hole between the last
file extent item in the 2nd leaf and the first file extent item in
the 3rd leaf (which was the 4th leaf before punching the hole).
Fix this by scanning all leafs and punch holes as necessary when doing a
full fsync (less common than a non-full fsync) when the NO_HOLES feature
is enabled. The lack of explicit file extent items to mark holes makes it
necessary to scan existing extents to determine if holes exist.
A test case for fstests follows soon.
Fixes:
16e7549f045d33 ("Btrfs: incompatible format change to remove hole extents")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Mon, 20 Jan 2020 00:02:49 +0000 (16:02 -0800)]
Linux 5.5-rc7
Linus Torvalds [Sun, 19 Jan 2020 20:10:28 +0000 (12:10 -0800)]
Merge tag 'riscv/for-v5.5-rc7' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Three fixes for RISC-V:
- Don't free and reuse memory containing the code that CPUs parked at
boot reside in.
- Fix rv64 build problems for ubsan and some modules by adding
logical and arithmetic shift helpers for 128-bit values. These are
from libgcc and are similar to what's present for ARM64.
- Fix vDSO builds to clean up their own temporary files"
* tag 'riscv/for-v5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Less inefficient gcc tishift helpers (and export their symbols)
riscv: delete temporary files
riscv: make sure the cores stay looping in .Lsecondary_park
Linus Torvalds [Sun, 19 Jan 2020 20:03:53 +0000 (12:03 -0800)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Fix non-blocking connect() in x25, from Martin Schiller.
2) Fix spurious decryption errors in kTLS, from Jakub Kicinski.
3) Netfilter use-after-free in mtype_destroy(), from Cong Wang.
4) Limit size of TSO packets properly in lan78xx driver, from Eric
Dumazet.
5) r8152 probe needs an endpoint sanity check, from Johan Hovold.
6) Prevent looping in tcp_bpf_unhash() during sockmap/tls free, from
John Fastabend.
7) hns3 needs short frames padded on transmit, from Yunsheng Lin.
8) Fix netfilter ICMP header corruption, from Eyal Birger.
9) Fix soft lockup when low on memory in hns3, from Yonglong Liu.
10) Fix NTUPLE firmware command failures in bnxt_en, from Michael Chan.
11) Fix memory leak in act_ctinfo, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
cxgb4: reject overlapped queues in TC-MQPRIO offload
cxgb4: fix Tx multi channel port rate limit
net: sched: act_ctinfo: fix memory leak
bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal.
bnxt_en: Fix ipv6 RFS filter matching logic.
bnxt_en: Fix NTUPLE firmware command failures.
net: systemport: Fixed queue mapping in internal ring map
net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec
net: dsa: sja1105: Don't error out on disabled ports with no phy-mode
net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset
net: hns: fix soft lockup when there is not enough memory
net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()
net/sched: act_ife: initalize ife->metalist earlier
netfilter: nat: fix ICMP header corruption on ICMP errors
net: wan: lapbether.c: Use built-in RCU list checking
netfilter: nf_tables: fix flowtable list del corruption
netfilter: nf_tables: fix memory leak in nf_tables_parse_netdev_hooks()
netfilter: nf_tables: remove WARN and add NLA_STRING upper limits
netfilter: nft_tunnel: ERSPAN_VERSION must not be null
netfilter: nft_tunnel: fix null-attribute check
...
Linus Torvalds [Sun, 19 Jan 2020 20:02:06 +0000 (12:02 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two runtime PM fixes and one leak fix"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: iop3xx: Fix memory leak in probe error path
i2c: tegra: Properly disable runtime PM on driver's probe error
i2c: tegra: Fix suspending in active runtime PM state
Rahul Lakkireddy [Fri, 17 Jan 2020 12:51:47 +0000 (18:21 +0530)]
cxgb4: reject overlapped queues in TC-MQPRIO offload
A queue can't belong to multiple traffic classes. So, reject
any such configuration that results in overlapped queues for a
traffic class.
Fixes:
b1396c2bd675 ("cxgb4: parse and configure TC-MQPRIO offload")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Fri, 17 Jan 2020 12:53:55 +0000 (18:23 +0530)]
cxgb4: fix Tx multi channel port rate limit
T6 can support 2 egress traffic management channels per port to
double the total number of traffic classes that can be configured.
In this configuration, if the class belongs to the other channel,
then all the queues must be bound again explicitly to the new class,
for the rate limit parameters on the other channel to take effect.
So, always explicitly bind all queues to the port rate limit traffic
class, regardless of the traffic management channel that it belongs
to. Also, only bind queues to port rate limit traffic class, if all
the queues don't already belong to an existing different traffic
class.
Fixes:
4ec4762d8ec6 ("cxgb4: add TC-MATCHALL classifier egress offload")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sun, 19 Jan 2020 04:45:06 +0000 (20:45 -0800)]
net: sched: act_ctinfo: fix memory leak
Implement a cleanup method to properly free ci->params
BUG: memory leak
unreferenced object 0xffff88811746e2c0 (size 64):
comm "syz-executor617", pid 7106, jiffies
4294943055 (age 14.250s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
c0 34 60 84 ff ff ff ff 00 00 00 00 00 00 00 00 .4`.............
backtrace:
[<
0000000015aa236f>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<
0000000015aa236f>] slab_post_alloc_hook mm/slab.h:586 [inline]
[<
0000000015aa236f>] slab_alloc mm/slab.c:3320 [inline]
[<
0000000015aa236f>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3549
[<
000000002c946bd1>] kmalloc include/linux/slab.h:556 [inline]
[<
000000002c946bd1>] kzalloc include/linux/slab.h:670 [inline]
[<
000000002c946bd1>] tcf_ctinfo_init+0x21a/0x530 net/sched/act_ctinfo.c:236
[<
0000000086952cca>] tcf_action_init_1+0x400/0x5b0 net/sched/act_api.c:944
[<
000000005ab29bf8>] tcf_action_init+0x135/0x1c0 net/sched/act_api.c:1000
[<
00000000392f56f9>] tcf_action_add+0x9a/0x200 net/sched/act_api.c:1410
[<
0000000088f3c5dd>] tc_ctl_action+0x14d/0x1bb net/sched/act_api.c:1465
[<
000000006b39d986>] rtnetlink_rcv_msg+0x178/0x4b0 net/core/rtnetlink.c:5424
[<
00000000fd6ecace>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
[<
0000000047493d02>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442
[<
00000000bdcf8286>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
[<
00000000bdcf8286>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328
[<
00000000fc5b92d9>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917
[<
00000000da84d076>] sock_sendmsg_nosec net/socket.c:639 [inline]
[<
00000000da84d076>] sock_sendmsg+0x54/0x70 net/socket.c:659
[<
0000000042fb2eee>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330
[<
000000008f23f67e>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384
[<
00000000d838e4f6>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417
[<
00000000289a9cb1>] __do_sys_sendmsg net/socket.c:2426 [inline]
[<
00000000289a9cb1>] __se_sys_sendmsg net/socket.c:2424 [inline]
[<
00000000289a9cb1>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424
Fixes:
24ec483cec98 ("net: sched: Introduce act_ctinfo action")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Olof Johansson [Tue, 17 Dec 2019 04:06:31 +0000 (20:06 -0800)]
riscv: Less inefficient gcc tishift helpers (and export their symbols)
The existing __lshrti3 was really inefficient, and the other two helpers
are also needed to compile some modules.
Add the missing versions, and export all of the symbols like arm64
already does.
This code is based on the assembly generated by libgcc builds.
This fixes a build break triggered by ubsan:
riscv64-unknown-linux-gnu-ld: lib/ubsan.o: in function `.L2':
ubsan.c:(.text.unlikely+0x38): undefined reference to `__ashlti3'
riscv64-unknown-linux-gnu-ld: ubsan.c:(.text.unlikely+0x42): undefined reference to `__ashrti3'
Signed-off-by: Olof Johansson <olof@lixom.net>
[paul.walmsley@sifive.com: use SYM_FUNC_{START,END} instead of
ENTRY/ENDPROC; note libgcc origin]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Linus Torvalds [Sun, 19 Jan 2020 00:34:17 +0000 (16:34 -0800)]
Merge tag 'mtd/fixes-for-5.5-rc7' of git://git./linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"Raw NAND:
- GPMI: Fix the suspend/resume
SPI-NOR:
- Fix quad enable on Spansion like flashes
- Fix selection of 4-byte addressing opcodes on Spansion"
* tag 'mtd/fixes-for-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: gpmi: Restore nfc timing setup after suspend/resume
mtd: rawnand: gpmi: Fix suspend/resume problem
mtd: spi-nor: Fix quad enable for Spansion like flashes
mtd: spi-nor: Fix selection of 4-byte addressing opcodes on Spansion
Linus Torvalds [Sat, 18 Jan 2020 21:57:31 +0000 (13:57 -0800)]
Merge tag 'drm-fixes-2020-01-19' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Back from LCA2020, fixes wasn't too busy last week, seems to have
quieten down appropriately, some amdgpu, i915, then a core mst fix and
one fix for virtio-gpu and one for rockchip:
core mst:
- serialize down messages and clear timeslots are on unplug
amdgpu:
- Update golden settings for renoir
- eDP fix
i915:
- uAPI fix: Remove dash and colon from PMU names to comply with
tools/perf
- Fix for include file that was indirectly included
- Two fixes to make sure VMA are marked active for error capture
virtio:
- maintain obj reservation lock when submitting cmds
rockchip:
- increase link rate var size to accommodate rates"
* tag 'drm-fixes-2020-01-19' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Reorder detect_edp_sink_caps before link settings read.
drm/amdgpu: update goldensetting for renoir
drm/dp_mst: Have DP_Tx send one msg at a time
drm/dp_mst: clear time slots for ports invalid
drm/i915/pmu: Do not use colons or dashes in PMU names
drm/rockchip: fix integer type used for storing dp data rate
drm/i915/gt: Mark ring->vma as active while pinned
drm/i915/gt: Mark context->state vma as active while pinned
drm/i915/gt: Skip trying to unbind in restore_ggtt_mappings
drm/i915: Add missing include file <linux/math64.h>
drm/virtio: add missing virtio_gpu_array_lock_resv call
Ilie Halip [Wed, 15 Jan 2020 11:32:42 +0000 (13:32 +0200)]
riscv: delete temporary files
Temporary files used in the VDSO build process linger on even after make
mrproper: vdso-dummy.o.tmp, vdso.so.dbg.tmp.
Delete them once they're no longer needed.
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Linus Torvalds [Sat, 18 Jan 2020 21:02:12 +0000 (13:02 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- a resctrl fix for uninitialized objects found by debugobjects
- a resctrl memory leak fix
- fix the unintended re-enabling of the of SME and SEV CPU flags if
memory encryption was disabled at bootup via the MSR space"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Ensure clearing of SME/SEV features is maintained
x86/resctrl: Fix potential memory leak
x86/resctrl: Fix an imbalance in domain_remove_cpu()
Linus Torvalds [Sat, 18 Jan 2020 21:00:59 +0000 (13:00 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Three fixes: fix link failure on Alpha, fix a Sparse warning and
annotate/robustify a lockless access in the NOHZ code"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/sched: Annotate lockless access to last_jiffies_update
lib/vdso: Make __cvdso_clock_getres() static
time/posix-stubs: Provide compat itimer supoprt for alpha
Linus Torvalds [Sat, 18 Jan 2020 20:57:41 +0000 (12:57 -0800)]
Merge branch 'smp-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull cpu/SMT fix from Ingo Molnar:
"Fix a build bug on CONFIG_HOTPLUG_SMT=y && !CONFIG_SYSFS kernels"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/SMT: Fix x86 link error without CONFIG_SYSFS
Linus Torvalds [Sat, 18 Jan 2020 20:56:36 +0000 (12:56 -0800)]
Merge branch 'ras-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 RAS fix from Ingo Molnar:
"Fix a thermal throttling race that can result in easy to trigger boot
crashes on certain Ice Lake platforms"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce/therm_throt: Do not access uninitialized therm_work
Linus Torvalds [Sat, 18 Jan 2020 20:55:19 +0000 (12:55 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Tooling fixes, three Intel uncore driver fixes, plus an AUX events fix
uncovered by the perf fuzzer"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Remove PCIe3 unit for SNR
perf/x86/intel/uncore: Fix missing marker for snr_uncore_imc_freerunning_events
perf/x86/intel/uncore: Add PCI ID of IMC for Xeon E3 V5 Family
perf: Correctly handle failed perf_get_aux_event()
perf hists: Fix variable name's inconsistency in hists__for_each() macro
perf map: Set kmap->kmaps backpointer for main kernel map chunks
perf report: Fix incorrectly added dimensions as switch perf data file
tools lib traceevent: Fix memory leakage in filter_event
Linus Torvalds [Sat, 18 Jan 2020 20:53:28 +0000 (12:53 -0800)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"Three fixes:
- Fix an rwsem spin-on-owner crash, introduced in v5.4
- Fix a lockdep bug when running out of stack_trace entries,
introduced in v5.4
- Docbook fix"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Fix kernel crash when spinning on RWSEM_OWNER_UNKNOWN
futex: Fix kernel-doc notation warning
locking/lockdep: Fix buffer overrun problem in stack_trace[]
Linus Torvalds [Sat, 18 Jan 2020 20:52:18 +0000 (12:52 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix a recent regression in the Ingenic SoCs irqchip driver that floods
the syslog"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ingenic: Get rid of the legacy IRQ domain
Linus Torvalds [Sat, 18 Jan 2020 20:50:14 +0000 (12:50 -0800)]
Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Three EFI fixes:
- Fix a slow-boot-scrolling regression but making sure we use WC for
EFI earlycon framebuffer mappings on x86
- Fix a mixed EFI mode boot crash
- Disable paging explicitly before entering startup_32() in mixed
mode bootup"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efistub: Disable paging at mixed mode entry
efi/libstub/random: Initialize pointer variables to zero for mixed mode
efi/earlycon: Fix write-combine mapping on x86
Linus Torvalds [Sat, 18 Jan 2020 20:29:13 +0000 (12:29 -0800)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull rseq fixes from Ingo Molnar:
"Two rseq bugfixes:
- CLONE_VM !CLONE_THREAD didn't work properly, the kernel would end
up corrupting the TLS of the parent. Technically a change in the
ABI but the previous behavior couldn't resonably have been relied
on by applications so this looks like a valid exception to the ABI
rule.
- Make the RSEQ_FLAG_UNREGISTER ABI behavior consistent with the
handling of other flags. This is not thought to impact any
applications either"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Unregister rseq for clone CLONE_VM
rseq: Reject unknown flags on rseq unregister
Linus Torvalds [Sat, 18 Jan 2020 20:23:31 +0000 (12:23 -0800)]
Merge tag 'for-linus-2020-01-18' of git://git./linux/kernel/git/brauner/linux
Pull thread fixes from Christian Brauner:
"Here is an urgent fix for ptrace_may_access() permission checking.
Commit
69f594a38967 ("ptrace: do not audit capability check when
outputing /proc/pid/stat") introduced the ability to opt out of audit
messages for accesses to various proc files since they are not
violations of policy.
While doing so it switched the check from ns_capable() to
has_ns_capability{_noaudit}(). That means it switched from checking
the subjective credentials (ktask->cred) of the task to using the
objective credentials (ktask->real_cred). This is appears to be wrong.
ptrace_has_cap() is currently only used in ptrace_may_access() And is
used to check whether the calling task (subject) has the
CAP_SYS_PTRACE capability in the provided user namespace to operate on
the target task (object). According to the cred.h comments this means
the subjective credentials of the calling task need to be used.
With this fix we switch ptrace_has_cap() to use security_capable() and
thus back to using the subjective credentials.
As one example where this might be particularly problematic, Jann
pointed out that in combination with the upcoming IORING_OP_OPENAT{2}
feature, this bug might allow unprivileged users to bypass the
capability checks while asynchronously opening files like /proc/*/mem,
because the capability checks for this would be performed against
kernel credentials.
To illustrate on the former point about this being exploitable: When
io_uring creates a new context it records the subjective credentials
of the caller. Later on, when it starts to do work it creates a kernel
thread and registers a callback. The callback runs with kernel creds
for ktask->real_cred and ktask->cred.
To prevent this from becoming a full-blown 0-day io_uring will call
override_cred() and override ktask->cred with the subjective
credentials of the creator of the io_uring instance. With
ptrace_has_cap() currently looking at ktask->real_cred this override
will be ineffective and the caller will be able to open arbitray proc
files as mentioned above.
Luckily, this is currently not exploitable but would be so once
IORING_OP_OPENAT{2} land in v5.6. Let's fix it now.
To minimize potential regressions I successfully ran the criu
testsuite. criu makes heavy use of ptrace() and extensively hits
ptrace_may_access() codepaths and has a good change of detecting any
regressions.
Additionally, I succesfully ran the ptrace and seccomp kernel tests"
* tag 'for-linus-2020-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
ptrace: reintroduce usage of subjective credentials in ptrace_has_cap()
Linus Torvalds [Sat, 18 Jan 2020 20:18:55 +0000 (12:18 -0800)]
Merge tag 's390-5.5-5' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix printing misleading Secure-IPL enabled message when it is not.
- Fix a race condition between host ap bus and guest ap bus doing
device reset in crypto code.
- Fix sanity check in CCA cipher key function (CCA AES cipher key
support), which fails otherwise.
* tag 's390-5.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/setup: Fix secure ipl message
s390/zcrypt: move ap device reset from bus to driver code
s390/zcrypt: Fix CCA cipher key gen with clear key value function
Linus Torvalds [Sat, 18 Jan 2020 20:12:36 +0000 (12:12 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three fixes in drivers with no impact to core code.
The mptfusion fix is enormous because the driver API had to be
rethreaded to pass down the necessary iocp pointer, but once that's
done a significant chunk of code is deleted.
The other two patches are small"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mptfusion: Fix double fetch bug in ioctl
scsi: storvsc: Correctly set number of hardware queues for IDE disk
scsi: fnic: fix invalid stack access
Linus Torvalds [Sat, 18 Jan 2020 20:08:57 +0000 (12:08 -0800)]
Merge tag 'char-misc-5.5-rc7' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small fixes for 5.5-rc7
Included here are:
- two lkdtm fixes
- coresight build fix
- Documentation update for the hw process document
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Documentation/process: Add Amazon contact for embargoed hardware issues
lkdtm/bugs: fix build error in lkdtm_UNSET_SMEP
lkdtm/bugs: Make double-fault test always available
coresight: etm4x: Fix unused function warning
Linus Torvalds [Sat, 18 Jan 2020 20:06:09 +0000 (12:06 -0800)]
Merge tag 'staging-5.5-rc7' of git://git./linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Here are some small staging and iio driver fixes for 5.5-rc7
All of them are for some small reported issues. Nothing major, full
details in the shortlog.
All have been in linux-next with no reported issues"
* tag 'staging-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: comedi: ni_routes: allow partial routing information
staging: comedi: ni_routes: fix null dereference in ni_find_route_source()
iio: light: vcnl4000: Fix scale for vcnl4040
iio: buffer: align the size of scan bytes to size of the largest element
iio: chemical: pms7003: fix unmet triggered buffer dependency
iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID
iio: adc: ad7124: Fix DT channel configuration
Linus Torvalds [Sat, 18 Jan 2020 20:02:33 +0000 (12:02 -0800)]
Merge tag 'usb-5.5-rc7' of git://git./linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver and core fixes for 5.5-rc7
There's one fix for hub wakeup issues and a number of small usb-serial
driver fixes and device id updates.
The hub fix has been in linux-next for a while with no reported
issues, and the usb-serial ones have all passed 0-day with no
problems"
* tag 'usb-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: quatech2: handle unbound ports
USB: serial: keyspan: handle unbound ports
USB: serial: io_edgeport: add missing active-port sanity check
USB: serial: io_edgeport: handle unbound ports on URB completion
USB: serial: ch341: handle unbound port at reset_resume
USB: serial: suppress driver bind attributes
USB: serial: option: add support for Quectel RM500Q in QDL mode
usb: core: hub: Improved device recognition on remote wakeup
USB: serial: opticon: fix control-message timeouts
USB: serial: option: Add support for Quectel RM500Q
USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xx
David S. Miller [Sat, 18 Jan 2020 13:38:30 +0000 (14:38 +0100)]
Merge branch 'bnxt_en-fixes'
Michael Chan says:
====================
bnxt_en: Bug fixes.
3 small bug fix patches. The 1st two are aRFS fixes and the last one
fixes a fatal driver load failure on some kernels without PCIe
extended config space support enabled.
Please also queue these for -stable. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Fri, 17 Jan 2020 05:32:47 +0000 (00:32 -0500)]
bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal.
DSN read can fail, for example on a kdump kernel without PCIe extended
config space support. If DSN read fails, don't set the
BNXT_FLAG_DSN_VALID flag and continue loading. Check the flag
to see if the stored DSN is valid before using it. Only VF reps
creation should fail without valid DSN.
Fixes:
03213a996531 ("bnxt: move bp->switch_id initialization to PF probe")
Reported-by: Marc Smith <msmith626@gmail.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Fri, 17 Jan 2020 05:32:46 +0000 (00:32 -0500)]
bnxt_en: Fix ipv6 RFS filter matching logic.
Fix bnxt_fltr_match() to match ipv6 source and destination addresses.
The function currently only checks ipv4 addresses and will not work
corrently on ipv6 filters.
Fixes:
c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Fri, 17 Jan 2020 05:32:45 +0000 (00:32 -0500)]
bnxt_en: Fix NTUPLE firmware command failures.
The NTUPLE related firmware commands are sent to the wrong firmware
channel, causing all these commands to fail on new firmware that
supports the new firmware channel. Fix it by excluding the 3
NTUPLE firmware commands from the list for the new firmware channel.
Fixes:
760b6d33410c ("bnxt_en: Add support for 2nd firmware message channel.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Brauner [Wed, 15 Jan 2020 13:42:34 +0000 (14:42 +0100)]
ptrace: reintroduce usage of subjective credentials in ptrace_has_cap()
Commit
69f594a38967 ("ptrace: do not audit capability check when outputing /proc/pid/stat")
introduced the ability to opt out of audit messages for accesses to various
proc files since they are not violations of policy. While doing so it
somehow switched the check from ns_capable() to
has_ns_capability{_noaudit}(). That means it switched from checking the
subjective credentials of the task to using the objective credentials. This
is wrong since. ptrace_has_cap() is currently only used in
ptrace_may_access() And is used to check whether the calling task (subject)
has the CAP_SYS_PTRACE capability in the provided user namespace to operate
on the target task (object). According to the cred.h comments this would
mean the subjective credentials of the calling task need to be used.
This switches ptrace_has_cap() to use security_capable(). Because we only
call ptrace_has_cap() in ptrace_may_access() and in there we already have a
stable reference to the calling task's creds under rcu_read_lock() there's
no need to go through another series of dereferences and rcu locking done
in ns_capable{_noaudit}().
As one example where this might be particularly problematic, Jann pointed
out that in combination with the upcoming IORING_OP_OPENAT feature, this
bug might allow unprivileged users to bypass the capability checks while
asynchronously opening files like /proc/*/mem, because the capability
checks for this would be performed against kernel credentials.
To illustrate on the former point about this being exploitable: When
io_uring creates a new context it records the subjective credentials of the
caller. Later on, when it starts to do work it creates a kernel thread and
registers a callback. The callback runs with kernel creds for
ktask->real_cred and ktask->cred. To prevent this from becoming a
full-blown 0-day io_uring will call override_cred() and override
ktask->cred with the subjective credentials of the creator of the io_uring
instance. With ptrace_has_cap() currently looking at ktask->real_cred this
override will be ineffective and the caller will be able to open arbitray
proc files as mentioned above.
Luckily, this is currently not exploitable but will turn into a 0-day once
IORING_OP_OPENAT{2} land in v5.6. Fix it now!
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Jann Horn <jannh@google.com>
Fixes:
69f594a38967 ("ptrace: do not audit capability check when outputing /proc/pid/stat")
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Dave Airlie [Sat, 18 Jan 2020 02:54:10 +0000 (12:54 +1000)]
Merge tag 'drm-misc-fixes-2020-01-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
virtio: maintain obj reservation lock when submitting cmds (Gerd)
rockchip: increase link rate var size to accommodate rates (Tobias)
mst: serialize down messages and clear timeslots are on unplug (Wayne)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tobias Schramm <t.schramm@manjaro.org>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116162856.GA11524@art_vandelay
Dave Airlie [Sat, 18 Jan 2020 02:53:53 +0000 (12:53 +1000)]
Merge tag 'drm-intel-fixes-2020-01-16' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- uAPI fix: Remove dash and colon from PMU names to comply with tools/perf
- Fix for include file that was indirectly included
- Two fixes to make sure VMA are marked active for error capture
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116161419.GA13594@jlahtine-desk.ger.corp.intel.com
Esben Haabendal [Fri, 17 Jan 2020 20:05:37 +0000 (21:05 +0100)]
mtd: rawnand: gpmi: Restore nfc timing setup after suspend/resume
As we reset the GPMI block at resume, the timing parameters setup by a
previous exec_op is lost. Rewriting GPMI timing registers on first exec_op
after resume fixes the problem.
Fixes:
ef347c0cfd61 ("mtd: rawnand: gpmi: Implement exec_op")
Cc: stable@vger.kernel.org
Signed-off-by: Esben Haabendal <esben@geanix.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Esben Haabendal [Fri, 17 Jan 2020 20:05:36 +0000 (21:05 +0100)]
mtd: rawnand: gpmi: Fix suspend/resume problem
On system resume, the gpmi clock must be enabled before accessing gpmi
block. Without this, resume causes something like
[ 661.348790] gpmi_reset_block(
5cbb0f7e): module reset timeout
[ 661.348889] gpmi-nand 1806000.gpmi-nand: Error setting GPMI : -110
[ 661.348928] PM: dpm_run_callback(): platform_pm_resume+0x0/0x44 returns -110
[ 661.348961] PM: Device 1806000.gpmi-nand failed to resume: error -110
Fixes:
ef347c0cfd61 ("mtd: rawnand: gpmi: Implement exec_op")
Cc: stable@vger.kernel.org
Signed-off-by: Esben Haabendal <esben@geanix.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Michael Walle [Thu, 16 Jan 2020 09:37:00 +0000 (10:37 +0100)]
mtd: spi-nor: Fix quad enable for Spansion like flashes
The commit
7b678c69c0ca ("mtd: spi-nor: Merge spansion Quad Enable
methods") forgot to actually set the QE bit in some cases. Thus this
breaks quad mode accesses to flashes which support readback of the
status register-2. Fix it.
Fixes:
7b678c69c0ca ("mtd: spi-nor: Merge spansion Quad Enable methods")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Vignesh Raghavendra [Wed, 8 Jan 2020 05:13:43 +0000 (10:43 +0530)]
mtd: spi-nor: Fix selection of 4-byte addressing opcodes on Spansion
mtd->size is still unassigned when running spansion_post_sfdp_fixups()
hook, therefore use nor->params.size to determine the size of flash device.
This makes sure that 4-byte addressing opcodes are used on Spansion
flashes that are larger than 16MiB and don't have SFDP 4BAIT table
populated.
Fixes:
92094ebc385e ("mtd: spi-nor: Add spansion_post_sfdp_fixups()")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Linus Torvalds [Fri, 17 Jan 2020 19:25:45 +0000 (11:25 -0800)]
Merge tag 'io_uring-5.5-2020-01-16' of git://git.kernel.dk/linux-block
Pull io_uring fixes form Jens Axboe:
- Ensure ->result is always set when IO is retried (Bijan)
- In conjunction with the above, fix a regression in polled IO issue
when retried (me/Bijan)
- Don't setup async context for read/write fixed, otherwise we may
wrongly map the iovec on retry (me)
- Cancel io-wq work if we fail getting mm reference (me)
- Ensure dependent work is always initialized correctly (me)
- Only allow original task to submit IO, don't allow it from a passed
ring fd (me)
* tag 'io_uring-5.5-2020-01-16' of git://git.kernel.dk/linux-block:
io_uring: only allow submit from owning task
io_uring: ensure workqueue offload grabs ring mutex for poll list
io_uring: clear req->result always before issuing a read/write request
io_uring: be consistent in assigning next work from handler
io-wq: cancel work if we fail getting a mm reference
io_uring: don't setup async context for read/write fixed
Linus Torvalds [Fri, 17 Jan 2020 19:21:05 +0000 (11:21 -0800)]
Merge tag 'for-5.5-rc6-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes that have been in the works during last twp weeks.
All have a user visible effect and are stable material:
- scrub: properly update progress after calling cancel ioctl, calling
'resume' would start from the beginning otherwise
- fix subvolume reference removal, after moving out of the original
path the reference is not recognized and will lead to transaction
abort
- fix reloc root lifetime checks, could lead to crashes when there's
subvolume cleaning running in parallel
- fix memory leak when quotas get disabled in the middle of extent
accounting
- fix transaction abort in case of balance being started on degraded
mount on eg. RAID1"
* tag 'for-5.5-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: check rw_devices, not num_devices for balance
Btrfs: always copy scrub arguments back to user space
btrfs: relocation: fix reloc_root lifespan and access
btrfs: fix memory leak in qgroup accounting
btrfs: do not delete mismatched root refs
btrfs: fix invalid removal of root ref
btrfs: rework arguments of btrfs_unlink_subvol
Greg Kroah-Hartman [Fri, 17 Jan 2020 18:40:06 +0000 (19:40 +0100)]
Merge tag 'usb-serial-5.5-rc7' of https://git./linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.5-rc7
Here are a few fixes for issues related to unbound port devices which
could lead to NULL-pointer dereferences. Notably the bind attributes for
usb-serial (port) drivers are removed as almost none of the drivers can
handle individual ports going away once they've been bound.
Included are also some new device ids.
All but the unbound-port fixes have been in linux-next with no reported
issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
* tag 'usb-serial-5.5-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: quatech2: handle unbound ports
USB: serial: keyspan: handle unbound ports
USB: serial: io_edgeport: add missing active-port sanity check
USB: serial: io_edgeport: handle unbound ports on URB completion
USB: serial: ch341: handle unbound port at reset_resume
USB: serial: suppress driver bind attributes
USB: serial: option: add support for Quectel RM500Q in QDL mode
USB: serial: opticon: fix control-message timeouts
USB: serial: option: Add support for Quectel RM500Q
USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xx
Linus Torvalds [Fri, 17 Jan 2020 16:42:02 +0000 (08:42 -0800)]
Merge tag 'fuse-fixes-5.5-rc7' of git://git./linux/kernel/git/mszeredi/fuse
Pull fuse fix from Miklos Szeredi:
"Fix a regression in the last release affecting the ftp module of the
gvfs filesystem"
* tag 'fuse-fixes-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: fix fuse_send_readpages() in the syncronous read case
Linus Torvalds [Fri, 17 Jan 2020 16:38:35 +0000 (08:38 -0800)]
Merge tag 'sound-5.5-rc7' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became bigger than I have hoped for rc7. But, the only large LOC
is for stm32 fixes that are simple rewriting of register access
helpers, while the rest are all nice and small fixes:
- A few ASoC fixes for the remaining probe error handling bugs
- ALSA sequencer core fix for racy proc file accesses
- Revert the option rename of snd-hda-intel to make compatible again
- Various device-specific fixes"
* tag 'sound-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: seq: Fix racy access for queue timer in proc read
ALSA: usb-audio: fix sync-ep altsetting sanity check
ASoC: msm8916-wcd-digital: Reset RX interpolation path after use
ASoC: msm8916-wcd-analog: Fix MIC BIAS Internal1
ASoC: cros_ec_codec: Make the device acpi compatible
ASoC: sti: fix possible sleep-in-atomic
ASoC: msm8916-wcd-analog: Fix selected events for MIC BIAS External1
ASoC: hdac_hda: Fix error in driver removal after failed probe
ASoC: SOF: Intel: fix HDA codec driver probe with multiple controllers
ASoC: SOF: Intel: lower print level to dbg if we will reinit DSP
ALSA: dice: fix fallback from protocol extension into limited functionality
ALSA: firewire-tascam: fix corruption due to spin lock without restoration in SoftIRQ context
ALSA: hda: Rename back to dmic_detect option
ASoC: stm32: dfsdm: fix 16 bits record
ASoC: stm32: sai: fix possible circular locking
ASoC: Fix NULL dereference at freeing
ASoC: Intel: bytcht_es8316: Fix Irbis NB41 netbook quirk
ASoC: rt5640: Fix NULL dereference on module unload
Johan Hovold [Fri, 17 Jan 2020 14:35:26 +0000 (15:35 +0100)]
USB: serial: quatech2: handle unbound ports
Check for NULL port data in the modem- and line-status handlers to avoid
dereferencing a NULL pointer in the unlikely case where a port device
isn't bound to a driver (e.g. after an allocation failure on port
probe).
Note that the other (stubbed) event handlers qt2_process_xmit_empty()
and qt2_process_flush() would need similar sanity checks in case they
are ever implemented.
Fixes:
f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver")
Cc: stable <stable@vger.kernel.org> # 3.5
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Johan Hovold [Fri, 17 Jan 2020 09:50:25 +0000 (10:50 +0100)]
USB: serial: keyspan: handle unbound ports
Check for NULL port data in the control URB completion handlers to avoid
dereferencing a NULL pointer in the unlikely case where a port device
isn't bound to a driver (e.g. after an allocation failure on port
probe()).
Fixes:
0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG")
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Johan Hovold [Fri, 17 Jan 2020 09:50:24 +0000 (10:50 +0100)]
USB: serial: io_edgeport: add missing active-port sanity check
The driver receives the active port number from the device, but never
made sure that the port number was valid. This could lead to a
NULL-pointer dereference or memory corruption in case a device sends
data for an invalid port.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Johan Hovold [Fri, 17 Jan 2020 09:50:23 +0000 (10:50 +0100)]
USB: serial: io_edgeport: handle unbound ports on URB completion
Check for NULL port data in the shared interrupt and bulk completion
callbacks to avoid dereferencing a NULL pointer in case a device sends
data for a port device which isn't bound to a driver (e.g. due to a
malicious device having unexpected endpoints or after an allocation
failure on port probe).
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Johan Hovold [Fri, 17 Jan 2020 09:50:22 +0000 (10:50 +0100)]
USB: serial: ch341: handle unbound port at reset_resume
Check for NULL port data in reset_resume() to avoid dereferencing a NULL
pointer in case the port device isn't bound to a driver (e.g. after a
failed control request at port probe).
Fixes:
1ded7ea47b88 ("USB: ch341 serial: fix port number changed after resume")
Cc: stable <stable@vger.kernel.org> # 2.6.30
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Josef Bacik [Fri, 10 Jan 2020 16:11:24 +0000 (11:11 -0500)]
btrfs: check rw_devices, not num_devices for balance
The fstest btrfs/154 reports
[ 8675.381709] BTRFS: Transaction aborted (error -28)
[ 8675.383302] WARNING: CPU: 1 PID: 31900 at fs/btrfs/block-group.c:2038 btrfs_create_pending_block_groups+0x1e0/0x1f0 [btrfs]
[ 8675.390925] CPU: 1 PID: 31900 Comm: btrfs Not tainted 5.5.0-rc6-default+ #935
[ 8675.392780] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
[ 8675.395452] RIP: 0010:btrfs_create_pending_block_groups+0x1e0/0x1f0 [btrfs]
[ 8675.402672] RSP: 0018:
ffffb2090888fb00 EFLAGS:
00010286
[ 8675.404413] RAX:
0000000000000000 RBX:
ffff92026dfa91c8 RCX:
0000000000000001
[ 8675.406609] RDX:
0000000000000000 RSI:
ffffffff8e100899 RDI:
ffffffff8e100971
[ 8675.408775] RBP:
ffff920247c61660 R08:
0000000000000000 R09:
0000000000000000
[ 8675.410978] R10:
0000000000000000 R11:
0000000000000000 R12:
00000000ffffffe4
[ 8675.412647] R13:
ffff92026db74000 R14:
ffff920247c616b8 R15:
ffff92026dfbc000
[ 8675.413994] FS:
00007fd5e57248c0(0000) GS:
ffff92027d800000(0000) knlGS:
0000000000000000
[ 8675.416146] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 8675.417833] CR2:
0000564aa51682d8 CR3:
000000006dcbc004 CR4:
0000000000160ee0
[ 8675.419801] Call Trace:
[ 8675.420742] btrfs_start_dirty_block_groups+0x355/0x480 [btrfs]
[ 8675.422600] btrfs_commit_transaction+0xc8/0xaf0 [btrfs]
[ 8675.424335] reset_balance_state+0x14a/0x190 [btrfs]
[ 8675.425824] btrfs_balance.cold+0xe7/0x154 [btrfs]
[ 8675.427313] ? kmem_cache_alloc_trace+0x235/0x2c0
[ 8675.428663] btrfs_ioctl_balance+0x298/0x350 [btrfs]
[ 8675.430285] btrfs_ioctl+0x466/0x2550 [btrfs]
[ 8675.431788] ? mem_cgroup_charge_statistics+0x51/0xf0
[ 8675.433487] ? mem_cgroup_commit_charge+0x56/0x400
[ 8675.435122] ? do_raw_spin_unlock+0x4b/0xc0
[ 8675.436618] ? _raw_spin_unlock+0x1f/0x30
[ 8675.438093] ? __handle_mm_fault+0x499/0x740
[ 8675.439619] ? do_vfs_ioctl+0x56e/0x770
[ 8675.441034] do_vfs_ioctl+0x56e/0x770
[ 8675.442411] ksys_ioctl+0x3a/0x70
[ 8675.443718] ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 8675.445333] __x64_sys_ioctl+0x16/0x20
[ 8675.446705] do_syscall_64+0x50/0x210
[ 8675.448059] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 8675.479187] BTRFS: error (device vdb) in btrfs_create_pending_block_groups:2038: errno=-28 No space left
We now use btrfs_can_overcommit() to see if we can flip a block group
read only. Before this would fail because we weren't taking into
account the usable un-allocated space for allocating chunks. With my
patches we were allowed to do the balance, which is technically correct.
The test is trying to start balance on degraded mount. So now we're
trying to allocate a chunk and cannot because we want to allocate a
RAID1 chunk, but there's only 1 device that's available for usage. This
results in an ENOSPC.
But we shouldn't even be making it this far, we don't have enough
devices to restripe. The problem is we're using btrfs_num_devices(),
that also includes missing devices. That's not actually what we want, we
need to use rw_devices.
The chunk_mutex is not needed here, rw_devices changes only in device
add, remove or replace, all are excluded by EXCL_OP mechanism.
Fixes:
e4d8ec0f65b9 ("Btrfs: implement online profile changing")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add stacktrace, update changelog, drop chunk_mutex ]
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 16 Jan 2020 11:29:20 +0000 (11:29 +0000)]
Btrfs: always copy scrub arguments back to user space
If scrub returns an error we are not copying back the scrub arguments
structure to user space. This prevents user space to know how much
progress scrub has done if an error happened - this includes -ECANCELED
which is returned when users ask for scrub to stop. A particular use
case, which is used in btrfs-progs, is to resume scrub after it is
canceled, in that case it relies on checking the progress from the scrub
arguments structure and then use that progress in a call to resume
scrub.
So fix this by always copying the scrub arguments structure to user
space, overwriting the value returned to user space with -EFAULT only if
copying the structure failed to let user space know that either that
copying did not happen, and therefore the structure is stale, or it
happened partially and the structure is probably not valid and corrupt
due to the partial copy.
Reported-by: Graham Cobb <g.btrfs@cobb.uk.net>
Link: https://lore.kernel.org/linux-btrfs/d0a97688-78be-08de-ca7d-bcb4c7fb397e@cobb.uk.net/
Fixes:
06fe39ab15a6a4 ("Btrfs: do not overwrite scrub error with fault error in scrub ioctl")
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Tested-by: Graham Cobb <g.btrfs@cobb.uk.net>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Fri, 17 Jan 2020 14:03:11 +0000 (06:03 -0800)]
Merge tag 'gpio-v5.5-4' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"This reverts the GPIOLIB_IRQCHIP in the ThunderX driver.
ThunderX is a piece of Arm-based server chip. I converted the driver
to hierarchical gpiochip without access to real silicon and failed
miserably since I didn't take MSI's into account.
Kevin Hao helpfully stepped in and fixed it properly, let's revert it
for v5.5 and put the proper conversion into v5.6"
* tag 'gpio-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
Revert "gpio: thunderx: Switch to GPIOLIB_IRQCHIP"
Linus Torvalds [Fri, 17 Jan 2020 13:54:18 +0000 (05:54 -0800)]
Merge tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Three fixes that should go into this release:
- The 32-bit segment size fix that I mentioned last week (Ming)
- Use uint for the block size (Mikulas)
- A null_blk zone write handling fix (Damien)"
* tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-block:
block: fix an integer overflow in logical block size
null_blk: Fix zone write handling
block: fix get_max_segment_size() overflow on 32bit arch
Florian Fainelli [Thu, 16 Jan 2020 21:08:58 +0000 (13:08 -0800)]
net: systemport: Fixed queue mapping in internal ring map
We would not be transmitting using the correct SYSTEMPORT transmit queue
during ndo_select_queue() which looks up the internal TX ring map
because while establishing the mapping we would be off by 4, so for
instance, when we populate switch port mappings we would be doing:
switch port 0, queue 0 -> ring index #0
switch port 0, queue 1 -> ring index #1
...
switch port 0, queue 3 -> ring index #3
switch port 1, queue 0 -> ring index #8 (4 + 4 * 1)
...
instead of using ring index #4. This would cause our ndo_select_queue()
to use the fallback queue mechanism which would pick up an incorrect
ring for that switch port. Fix this by using the correct switch queue
number instead of SYSTEMPORT queue number.
Fixes:
25c440704661 ("net: systemport: Simplify queue mapping logic")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 16 Jan 2020 20:55:48 +0000 (12:55 -0800)]
net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec
With the implementation of the system reset controller we lost a setting
that is currently applied by the bootloader and which configures the IMP
port for 2Gb/sec, the default is 1Gb/sec. This is needed given the
number of ports and applications we expect to run so bring back that
setting.
Fixes:
01b0ac07589e ("net: dsa: bcm_sf2: Add support for optional reset controller line")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 16 Jan 2020 18:43:27 +0000 (20:43 +0200)]
net: dsa: sja1105: Don't error out on disabled ports with no phy-mode
The sja1105_parse_ports_node function was tested only on device trees
where all ports were enabled. Fix this check so that the driver
continues to probe only with the ports where status is not "disabled",
as expected.
Fixes:
8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Grzeschik [Thu, 16 Jan 2020 13:16:31 +0000 (14:16 +0100)]
net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset
According to the Datasheet this bit should be 0 (Normal operation) in
default. With the FORCE_LINK_GOOD bit set, it is not possible to get a
link. This patch sets FORCE_LINK_GOOD to the default value after
resetting the phy.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>