media: mc: entity: add alloc variant of pipeline_start

Add new variant of media_pipeline_start(), media_pipeline_alloc_start().

media_pipeline_alloc_start() can be used by drivers that do not need to
extend the media_pipeline. The function will either use the pipeline
already associated with the entity, if such exists, or allocate a new
pipeline.

When media_pipeline_stop() is called and the pipeline's use count drops
to zero, the pipeline is automatically freed.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: drivers: use video_device_pipeline()

Use video_device_pipeline() in the drivers instead of
media_entity_pipeline().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: drivers: use video device pipeline start/stop

Convert the media drivers to use video device based pipeline start/stop
where possible.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l2-dev: Add videodev wrappers for media pipelines

With the upcoming stream related improvements to the pipelines, the
pipelines are moved from media entities to media pads. As the drivers
currently use the pipelines with the entity based model, moving the
pipelines to pads will cause changes to the drivers.

However, most of the uses of media pipelines are related to a video
device (a DMA engine) with a single pad, and thus there's never a need
to support multiple pads in these use cases. We can avoid pushing the
complexities of the pad based model to the drivers by adding video
device wrappers for the pipeline related functions.

This patch adds a number of wrappers to media_pipeline functions, all of
which take a video_device as a parameter (instead of a media_entity),
and verify that there's just one pad.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mc: entity: Add media_entity_pipeline() to access the media pipeline

Replace direct access to the pipe field in drivers with a new helper
function. This will allow easier refactoring of media pipeline handling
in the MC core behind the scenes without affecting drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mc: entity: Move media_entity_get_fwnode_pad() out of graph walk section

The media_entity_get_fwnode_pad() function is unrelated to the graph
traversal code that it is currently bundled with. Move it with the
media_entity_remote_pad() function.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mc: entity: Merge media_entity_enum_init and __media_entity_enum_init

The media_entity_enum_init() function is a wrapper around
__media_entity_enum_init() that turns a media_device pointer argument
into the maximum entity ID in the corresponding media graph.
__media_entity_enum_init() is never used outside of
media_entity_enum_init(), so the two functions can be merged together.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mc: entity: Add iterator helper for entity pads

Add an iterator helper to easily cycle through all pads in an entity and
use it in media-entity and media-device code where appropriate.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mc: entity: Rename streaming_count -> start_count

'streaming_count' is a bit misleading name, as the count is increased
with media_pipeline_start(). Let's rename it to 'start_count' instead.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: subdev: increase V4L2_FRAME_DESC_ENTRY_MAX to 8

V4L2_FRAME_DESC_ENTRY_MAX is currently set to 4. In theory it's possible
to have an arbitrary amount of streams in a single pad, so preferably
there should be no hardcoded maximum number.

However, I believe a reasonable max is 8, which would cover a CSI-2 pad
with 4 streams of pixel data and 4 streams of metadata.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: media-entity.h: add include for min()

./include/media/media-entity.h:595:34: error: implicit declaration of function ‘min’

Include minmax.h to get the definition for min().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: Documentation: mc: add definitions for stream and pipeline

The doc talks about streams and pipelines, but doesn't really define
them. This is an attempt to define them according to my understanding.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: Remove incorrect comment from struct v4l2_fwnode_endpoint

struct v4l2_fwnode_endpoint was zeroed previously apart from the endpoint
information itself when the endpoint properties were parsed. Now this
hasn't been the case for a few years so remove the comment.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: sun6i-mipi-csi2: Depend on PHY_SUN6I_MIPI_DPHY

PHY_SUN6I_MIPI_DPHY is not a freely selectable option and so may not
always be available. Depend on it instead.

Fixes: 94d7fd9692b5 ("media: sunxi: Depend on GENERIC_PHY_MIPI_DPHY")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ov8865: Fix an error handling path in ov8865_probe()

The commit in Fixes also introduced some new error handling which should
goto the existing error handling path.
Otherwise some resources leak.

Fixes: 73dcffeb2ff9 ("media: i2c: Support 19.2MHz input clock in ov8865")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ar0521: Fix return value check in writing initial registers

The return value from register writes is ignored apart from the last
value. Fix this.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l: subdev: Fail graciously when getting try data for NULL state

The state argument for the functions for obtaining various parts of the
state is NULL if it is called by drivers for active state. Fail graciously
in that case instead of dereferencing a NULL pointer.

Suggested-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ipu3-imgu: Fix NULL pointer dereference in active selection access

What the IMGU driver did was that it first acquired the pointers to active
and try V4L2 subdev state, and only then figured out which one to use.

The problem with that approach and a later patch (see Fixes: tag) is that
as sd_state argument to v4l2_subdev_get_try_crop() et al is NULL, there is
now an attempt to dereference that.

Fix this.

Also rewrap lines a little.

Fixes: 0d346d2a6f54 ("media: v4l2-subdev: add subdev-wide state struct")
Cc: stable@vger.kernel.org # for v5.14 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ar0521: Remove redundant variable ret

ret in ar0521_set_fmt is never set to values other than 0. Replace it with
plain 0.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ar0521: fix error return code in ar0521_power_on()

Return error code if ar0521_write_regs() fails in ar0521_power_on().

Fixes: 852b50aeed15 ("media: On Semi AR0521 sensor driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: mt9v111: Fix typo 'the the' in comment

Replace 'the the' with 'the' in the comment.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l2: Fix v4l2_i2c_subdev_set_name function documentation

The doc says the I²C device's name is used if devname is NULL, but
actually the I²C device driver's name is used.

Fixes: 0658293012af ("media: v4l: subdev: Add a function to set an I²C sub-device's name")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ov5640: Use runtime PM

Switch to using runtime PM for power management. Make it optional,
however, to support ACPI.

Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: ipu3-imgu: Fix BNR wb gain documentation

The documentation states that the BNR factor is a multiplier coded as
u3.13 and with a range of (0, 8). This is not correct, as the isp is
adding 1.0 to the gain applied, ie Pout = { Pin * (1 + Gx) }.

It means that a gain of 1.0 should be coded as 0.

Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: hantro: Allows luma and chroma depth to be different

Luma and chroma depth are set on different hardware registers.
Even if they aren't identical the bitstream can be compliant
to HEVC specifications and decoded by the hardware.

With this patch TSUNEQBD_A_MAIN10_Technicolor_2 conformance test
is successfully decoded.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: hantro: imx8m: Enable 10bit decoding

Expose 10bit pixel formats to enable 10bit decoding in IMX8M SoCs.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: Hantro: HEVC: Allows 10-bit bitstream

Stop limiting HEVC support to 8-bits bitstreams also
accept 10-bits bitstreams.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: hantro: postproc: Configure output regs to support 10bit

Move output format setting in postproc and make sure that
8/10bit configuration is correctly set.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: hantro: HEVC: Fix chroma offset computation

The chroma offset depends of the bitstream depth.
Make sure that ctx->bit_depth is used to compute it.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: hantro: HEVC: Fix auxilary buffer size calculation

SAO and FILTER buffers size depend of the bit depth.
Make sure we have enough space for 10bit bitstreams.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: hantro: Store HEVC bit depth in context

Store HEVC bit depth in context.
Bit depth is equal to hevc sps bit_depth_luma_minus8 + 8.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: meson: vdec: fix possible refcount leak in vdec_probe()

v4l2_device_unregister need to be called to put the refcount got by
v4l2_device_register when vdec_probe fails or vdec_remove is called.

Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: platform: cros-ec: Add Kuldax to the match table

The Google Kuldax device uses the same approach as the Google Brask
which enables the HDMI CEC via the cros-ec-cec driver.

Signed-off-by: Rory Liu <hellojacky0226@hotmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: MAINTAINERS: rectify entry in SAA7146 VIDEO4LINUX-2 DRIVER

Commit e33fdb5a0249 ("media: saa7146: deprecate hexium_gemini/orion, mxb
and ttpci") moves some media drivers to the staging subsystem, and
unfortunately only partially adjusts the entry in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

As the files matching include/media/drv-intf/saa7146* are moved to
drivers/staging/media/deprecated/saa7146/common, this directory is already
covered by the existing file entry
drivers/staging/media/deprecated/saa7146/.

Repair this file reference in SAA7146 VIDEO4LINUX-2 DRIVER.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: MAINTAINERS: adjust entry to zoran driver movement

Commit 2a0c28063de2 ("media: zoran: move to mainline") moves the zoran
driver from the staging to the media subsystem, but does not adjust the
entry in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Repair this file reference in ZR36067 VIDEO FOR LINUX DRIVER.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: tuners: Remove the unneeded result variable

Return the value xc_send_i2c_data() directly instead of storing it in
another redundant variable.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: platform: mtk-mdp3: fix PM reference leak in mdp_comp_clock_on()

mdp_comp_clock_on will increase runtime PM usage counter,
and mdp_comp_clock_off will decrease the runtime PM usage counter.
so, if mdp_comp_clock_on failed after increment runtime PM usage
counter, it should decrease it before return a error code.

pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.

And if failed to enable clk, add pm_runtime_put() to decrease the
runtime PM usage counter.

Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Sun Ke <sunke32@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: platform: mtk-mdp3: fix error code in mdp_vpu_dev_init()

Return a negative error code if mdp_vpu_shared_mem_alloc() fails.

Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: radio-si476x: Remove the unneeded result variable

Return the value v4l2_fh_release() directly instead of storing it in
another redundant variable.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: docs: libv4l-introduction.rst: Fix function signature and link

v4l2_mmap returns a void*, also link to mmap instead of munmap

Signed-off-by: Daniel Lundberg Pedersen <dlp@qtec.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: platform: mtk-mdp3: add pointer checks and use devm_kfree

Fix two errors reported by smatch:
    drivers/media/platform/mediatek/mdp3/mtk-mdp3-core.c:292
        mdp_probe() error: we previously assumed 'mdp' could be null
    drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:460
        mdp_cmdq_send() error: we previously assumed 'cmd' could be null

Also, avoid warnings reported by smatch:
    drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c:872
        mdp_comp_create() warn: passing devm_ allocated variable to kfree. 'comp'

[hverkuil: fix devm_kfree call]

Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: si4713: Use the right include

The driver includes the legacy <linux/gpio.h> header but uses
<linux/gpio/consumer.h>.

Cc: Dinesh Ram <Dinesh.Ram@cern.ch>
Cc: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: isl7998x: Use right include

This driver is using GPIO descriptors but uses the legacy
include header <linux/gpio.h>. Fix it by including the
intended <linux/gpio/consumer.h>.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: cec: add support for Absolute Volume Control

Add support for this new CEC message. This was added in HDMI 2.1a.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dvb-frontends/drxk: initialize err to 0

Fix a compiler warning:

drivers/media/dvb-frontends/drxk_hard.c: In function 'drxk_read_ucblocks':
drivers/media/dvb-frontends/drxk_hard.c:6673:21: warning: 'err' may be used uninitialized [-Wmaybe-uninitialized]
 6673 |         *ucblocks = (u32) err;
      |                     ^~~~~~~~~
drivers/media/dvb-frontends/drxk_hard.c:6663:13: note: 'err' was declared here
 6663 |         u16 err;
      |             ^~~

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l2-ctrls: drop 'elems' argument from control type ops.

The type ops for equal, init and validate have an elems argument,
but this can be taken from struct v4l2_ctrl: ctrl->elems for
equal and init, and ctrl->new_elems for validate (since you are
validating a new control value).

So drop this argument and update all callers.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: amphion: release m2m ctx when releasing vpu instance

release m2m ctx in the callback function that
release the vpu instance, then there is no need
to add lock around releasing m2m ctx.

Fixes: 3cd084519c6f ("media: amphion: add vpu v4l2 m2m support")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: coda: jpeg: drop coda9_jpeg_dec_huff_setup() return value

coda9_jpeg_dec_huff_setup() never returns anything but 0. Drop
return value and superfluous error handling at the call site.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: pci/cx18: fix repeated words in comments

Delete the redundant word 'is'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: usb/dvb-usb-v2: fix repeated words in comments

Delete the redundant word 'my'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: usb/msi2500: fix repeated words in comments

Delete the redundant word 'for'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: cros-ec-cec: limit msg.len to CEC_MAX_MSG_SIZE

I expect that the hardware will have limited this to 16, but just in
case it hasn't, check for this corner case.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: s5p_cec: limit msg.len to CEC_MAX_MSG_SIZE

I expect that the hardware will have limited this to 16, but just in
case it hasn't, check for this corner case.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: Zero v4l2_subdev_format fields in when validating links

The local sd_fmt variable in rkisp1_capture_link_validate() has
uninitialized fields, which causes random failures when calling the
subdev .get_fmt() operation. Fix it by initializing the variable when
declaring it, which zeros all other fields.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: Configure LSC after enabling the ISP

The ISP8000Nano v18.02 (found in the i.MX8MP) requires the ISP to be
enabled (as indicated by the ISP_CTRL.ISP_ENABLE bit) to configure the
lens shading table in internal RAM. The driver currently configures all
ISP initial parameters before enabling the ISP, which causes the LSC RAM
to not be initialized properly.

To fix this, split the rkisp1_params_configure() function into a
rkisp1_params_pre_configure() and a rkisp1_params_post_configure(). The
former configures all ISP parameters but LSC, while the latter
configures LSC. To implement this, the rkisp1_params_apply_params_cfg()
function is deconstructed, with two small helpers created to deal with
the parameters buffers, which are then used in rkisp1_params_isr(),
rkisp1_params_pre_configure() and rkisp1_params_post_configure().

While this initialization ordering is only needed for the ISP8000Nano
v18.02, it doesn't affect other ISP versions negatively, and can thus be
followed unconditionally.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: Use correct macro for gradient registers

The rkisp1_lsc_config() function incorrectly uses the
RKISP1_CIF_ISP_LSC_SECT_SIZE() macro for the gradient registers. Replace
it with the correct macro, and rename it from
RKISP1_CIF_ISP_LSC_GRAD_SIZE() to RKISP1_CIF_ISP_LSC_SECT_GRAD() as the
corresponding registers store the gradients for each sector, not a size.
This doesn't cause any functional change as the two macros are defined
identically (the size and gradient registers store fields in the same
number of bits at the same positions).

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: Simplify LSC x/y size and grad register macros

The LSC module x/y size and grad configuration is stored in a set of 4
indexed registers each. The rkisp1-regs.h header defines all those
registers, but only the first one in each set is used, with manual
calculation of addresses of subsequent registers. Simplifies this by
merging all 4 register macros into one that takes the index as a
parameter. No functional change intended.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: Store LSC register values in u32 variables

Use the u32 type instead of unsigned int to store register values in the
LSC configuration code, to make the variables' size more explicit. No
functional change intended.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: Clean up LSC configuration code

Clean up the LSC configuration code to improve its readability by
shortening lines, using extra local variables and renaming long
variables. No functional change intended.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: Allow setting color space on resizer sink pad

The resizer doesn't deal with color spaces, so it can accept any color
space on its input, and propagates it unchanged to its output. When
operating with a Bayer input format (in pass-through mode) further
restrict the YCbCr encoding and quantization to Rec 601 and full range
respectively, as for raw data the former ought to be ignored and the
latter is always full range.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: Initialize color space on resizer sink and source pads

Initialize the four color space fields on the sink and source video pads
of the resizer in the .init_cfg() operation. The resizer can't perform
any color space conversion, so set the sink and source color spaces to
the same defaults, which match the ISP source video pad default.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: Configure CSM based on YCbCr encoding

The driver currently only implements the Rec. 601 YCbCr encoding, extend
it with support for the other encodings defined by V4L2 (Rec. 709, Rec.
2020 and SMPTE240m). The coefficients have been calculated by rounding
the floating point values to the nearest Q1.7 fixed-point value,
adjusting the rounding to ensure that the sum of each line in the matrix
is preserved to avoid overflows.

At the hardware level, the RGB to YUV conversion matrix is fully
configurable, custom encoding could be supported by extending the ISP
parameters if desired.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: Don't pass the quantization to rkisp1_csm_config()

The rkisp1_csm_config() function takes a pointer to the rkisp1_params
structure which contains the quantization value. There's no need to pass
it separately to the function. Drop it from the function parameters.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: Configure quantization using ISP source pad

The rkisp1_config_isp() function uses the format on the sink pad of the
ISP to configure quantization at the output of the ISP. This is
incorrect, as hinted by the src_frm variable name that stores the
format. Fix it by using the source pad.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: Allow setting all color space fields on ISP source pad

The ISP output color space is configured through the ISP source pad. At
the moment, only the quantization can be set. Extend it to the three
other color space fields:

- The ycbcr_enc field will be used to configure the RGB to YUV matrix
  (currently hardcoded to Rec. 601).

- The colorspace (which controls the color primaries) and xfer_func
  fields will not be used to configure the ISP, as the corresponding
  hardware blocks (the cross-talk RGB to RGB matrix and the tone mapping
  curve) are programmed directly by applications through ISP parameters.
  Nonetheless, those two fields should be set by applications to match
  the ISP configuration, in order to propagate the correct color space
  down the pipeline up to the capture video nodes.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: Fix source pad format configuration

The ISP converts Bayer data to YUV when operating normally, and can also
operate in pass-through mode where the input and output formats must
match. Converting from YUV to Bayer isn't possible. If such an invalid
configuration is attempted, adjust it by copying the sink pad media bus
code to the source pad.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: Allow setting color space on ISP sink pad

The ISP accepts different color spaces on its input: for YUV input, it
doesn't set any restrictions, and for Bayer inputs, any color primaries
or transfer function can be accepted (YCbCr encoding isn't applicable
there, and quantization range can only be full).

Allow setting a color space on the ISP sink pad, with the aforementioned
restrictions. The settings don't influence hardware yet (only the YUV
quantization range will, anything else has no direct effect on the ISP
configuration), but can already be set to allow color space information
to be coherent across the ISP sink link.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: Initialize color space on ISP sink and source pads

Initialize the four color space fields on the sink and source video pads
of the ISP in the .init_cfg() operation. As the main use case for the
ISP is to convert Bayer data to YUV, select a raw color space on the
sink pad and a limited range quantization of SYCC on the source pad by
default.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rockchip: rkisp1: Define macros for DPCC configurations in UAPI

Extend the UAPI rkisp1-config.h header with macros for all DPCC
configuration fields. While at it, clarify of fix issues in the DPCC
documentation.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rockchip: rkisp1: Mask invalid bits in DPCC parameters

Restrict the DPCC configuration that can be set by userspace to valid
register bits. To do so, reorganize the related register macros to
define valid bitmasks, as well as bits of the DPCC mode register.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rockchip: rkisp1: Set DPCC methods enable bits inside loop

The rkisp1_dpcc_config() function looks over methods sets to configure
them, but sets the RKISP1_CIF_ISP_DPCC_METHODS_SET_* registers outside
of the loop with hand-unrolled code. Move this to the loop to simplify
the code.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mceusb: set timeout to at least timeout provided

By rounding down, the actual timeout can be lower than requested. As a
result, long spaces just below the requested timeout can be incorrectly
reported as timeout and truncated.

Fixes: 877f1a7cee3f ("media: rc: mceusb: allow the timeout to be configurable")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: imon: Remove the unneeded result variable

Return the value send_packet() directly instead of storing it in another
redundant variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mceusb: Use new usb_control_msg_*() routines

Automatic kernel fuzzing led to a WARN about invalid pipe direction in
the mceusb driver:

------------[ cut here ]------------
usb 6-1: BOGUS control dir, pipe 80000380 doesn't match bRequestType 40
WARNING: CPU: 0 PID: 2465 at drivers/usb/core/urb.c:410
usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410
Modules linked in:
CPU: 0 PID: 2465 Comm: kworker/0:2 Not tainted 5.19.0-rc4-00208-g69cb6c6556ad #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410
Code: 7c 24 40 e8 ac 23 91 fd 48 8b 7c 24 40 e8 b2 70 1b ff 45 89 e8
44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 a0 30 a9 86 e8 48 07 11 02 <0f> 0b
e9 1c f0 ff ff e8 7e 23 91 fd 0f b6 1d 63 22 83 05 31 ff 41
RSP: 0018:ffffc900032becf0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8881100f3058 RCX: 0000000000000000
RDX: ffffc90004961000 RSI: ffff888114c6d580 RDI: fffff52000657d90
RBP: ffff888105ad90f0 R08: ffffffff812c3638 R09: 0000000000000000
R10: 0000000000000005 R11: ffffed1023504ef1 R12: ffff888105ad9000
R13: 0000000000000040 R14: 0000000080000380 R15: ffff88810ba96500
FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe810bda58 CR3: 000000010b720000 CR4: 0000000000350ef0
Call Trace:
<TASK>
usb_start_wait_urb+0x101/0x4c0 drivers/usb/core/message.c:58
usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
usb_control_msg+0x31c/0x4a0 drivers/usb/core/message.c:153
mceusb_gen1_init drivers/media/rc/mceusb.c:1431 [inline]
mceusb_dev_probe+0x258e/0x33f0 drivers/media/rc/mceusb.c:1807

The reason for the warning is clear enough; the driver sends an
unusual read request on endpoint 0 but does not set the USB_DIR_IN bit
in the bRequestType field.

More importantly, the whole situation can be avoided and the driver
simplified by converting it over to the relatively new
usb_control_msg_recv() and usb_control_msg_send() routines.  That's
what this fix does.

Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com>
Link: https://lore.kernel.org/all/CAB7eexLLApHJwZfMQ=X-PtRhw0BgO+5KcSMS05FNUYejJXqtSA@mail.gmail.com/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: remove reference to CONFIG_EMBEDDED in MEDIA_SUPPORT_FILTER

The config EMBEDDED selects EXPERT, i.e., when EMBEDDED is enabled, EXPERT
is usually also enabled. Hence, it sufficient to have the option
MEDIA_SUPPORT_FILTER set to y if !EXPERT.

This way, MEDIA_SUPPORT_FILTER does not refer to CONFIG_EMBEDDED anymore
and allows us to remove CONFIG_EMBEDDED in the close future.

Remove the reference to CONFIG_EMBEDDED in MEDIA_SUPPORT_FILTER.

Link: https://lore.kernel.org/linux-media/20220908104337.11940-4-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: destage Hantro VPU driver

The Hantro mainline driver has been used in production
since several years and was only kept as a staging driver
due the stateless CODEC controls.

Now that all the stateless CODEC controls have been moved
out of staging, graduate the driver as well.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: platform: mtk-mdp3: add MediaTek MDP3 driver

This patch adds driver for MediaTek's Media Data Path ver.3 (MDP3).
It provides the following functions:
  color transform, format conversion, resize, crop, rotate, flip
  and additional image quality enhancement.

The MDP3 driver is mainly used for Google Chromebook products to
import the new architecture to set the HW settings as shown below:
  User -> V4L2 framework
    -> MDP3 driver -> SCP (setting calculations)
      -> MDP3 driver -> CMDQ (GCE driver) -> HW

Each modules' related operation control is sited in mtk-mdp3-comp.c
Each modules' register table is defined in file with "mdp_reg_" prefix
GCE related API, operation control  sited in mtk-mdp3-cmdq.c
V4L2 m2m device functions are implemented in mtk-mdp3-m2m.c
Probe, power, suspend/resume, system level functions are defined in
mtk-mdp3-core.c

[hverkuil: add 'depends on REMOTEPROC']

Signed-off-by: Ping-Hsun Wu <ping-hsun.wu@mediatek.com>
Signed-off-by: daoyuan huang <daoyuan.huang@mediatek.com>
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA

This patch adds DT binding documentation for MediaTek's CCORR and
WDMA components.
These components exist in both MediaTek's Media Data Path 3(MDP3) and DRM,
and the bindings are placed under the folder "./soc/mediatek" to prevent
duplicate builds.

Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-binding: mediatek: add bindings for MediaTek MDP3 components

This patch adds DT binding documents for Media Data Path 3 (MDP3)
a unit in multimedia system combined with several components and
used for scaling and color format convert.

Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init

of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: df3305156f98 ("[media] v4l: xilinx: Add Xilinx Video IP core")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: xilinx: video: Add 1X12 greyscale format

Extend the xilinx video driver with Y12_1X12 greyscale format

Signed-off-by: Volodymyr Kharuk <vkh@melexis.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: xilinx: csi2rxss: Add 1X12 greyscale format

Extend the csi2rxss with Y12_1X12 greyscale format

Signed-off-by: Volodymyr Kharuk <vkh@melexis.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: imx: imx7-media-csi: Increase video mem limit

Some high resolution (like Sony IMX492 47Mpix) sensors requre large amount space
for buffering.  64MB is far from sufficient so this patch increases the limit to
512MB.

Signed-off-by: Petko Manolov <petko.manolov@konsulko.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uvcvideo: Limit power line control for Sonix Technology

The device does not implement the power line control correctly. Add a
corresponding control mapping override.

Bus 003 Device 003: ID 3277:0072 Sonix Technology Co., Ltd. USB 2.0 Camera
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x3277
  idProduct          0x0072
  bcdDevice            1.00
  iManufacturer           2 Sonix Technology Co., Ltd.
  iProduct                1 USB 2.0 Camera
  iSerial                 3 REV0001
  bNumConfigurations      1

Signed-off-by: huanglei <huanglei@kylinos.cn>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uvcvideo: Use entity get_cur in uvc_ctrl_set

Entity controls should get_cur using an entity-defined function
instead of via a query. Fix this in uvc_ctrl_set.

Fixes: 65900c581d01 ("media: uvcvideo: Allow entity-defined get_info and get_cur")
Signed-off-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uvcvideo: Fix typo 'the the' in comment

Replace 'the the' with 'the' in the comment.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uvcvideo: Use indexed loops in uvc_ctrl_init_ctrl()

As shown by the bug introduced in commit 86f7ef773156 ("media: uvcvideo:
Add support for per-device control mapping overrides"), the loop style
used by uvc_ctrl_init_ctrl() is error-prone. Rewrite the loops to use
indices instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uvcvideo: Fix memory leak in uvc_gpio_parse

Previously the unit buffer was allocated before checking the IRQ for
privacy GPIO. In case of error, the unit buffer was leaked.

Allocate the unit buffer after the IRQ to avoid it.

Addresses-Coverity-ID: 1474639 ("Resource leak")

Fixes: 2886477ff987 ("media: uvcvideo: Implement UVC_EXT_GPIO_UNIT")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: renesas: vsp1: Add support for RZ/G2L VSPD

The RZ/G2L VSPD provides a single VSPD instance. It has the following
sub modules MAU, CTU, RPF, DPR, LUT, BRS, WPF and LIF.

The VSPD block on RZ/G2L SoCs does not have a version register, so
added a new compatible string "renesas,r9a07g044-vsp2" with a data
pointer containing the info structure. Also the reset line is shared
with the DU module.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: renesas: vsp1: Add VSP1_HAS_NON_ZERO_LBA feature bit

As per HW manual V3M and RZ/G2L SoCs has nonzero LIF buffer
attributes. So, introduce a feature bit for handling the same.

This patch also adds separate device info structure for V3M and V3H
SoCs, as both these SoCs share the same model ID, but V3H does not
have VSP1_HAS_NON_ZERO_LBA feature bit.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: renesas: vsp1: Add support for VSP software version

The VSPD block on RZ/G2L SoCs does not have a version register.

This patch adds support for adding VSP software version based on
device match.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: renesas: vsp1: Add support to deassert/assert reset line

As the resets DT property is mandatory, and is present in all .dtsi
in mainline, add support to perform deassert/assert using reference
counted reset handle.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-bindings: media: renesas,vsp1: Document RZ/G2L VSPD bindings

Document VSPD found in RZ/G2L SoC. VSPD block is similar to VSP2-D
found on R-Car SoC's, but it does not have a version register and
it has 3 clocks compared to 1 clock on vsp1 and vsp2.

This patch introduces a new compatible 'renesas,r9a07g044-vsp2' to
handle these differences.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: meson: vdec: add missing clk_disable_unprepare on error in vdec_hevc_start()

Add the missing clk_disable_unprepare() before return
from vdec_hevc_start() in the error handling case.

Fixes: 823a7300340e (“media: meson: vdec: add common HEVC decoder support”)
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: amphion: fix a bug that vpu core may not resume after suspend

driver will enable the vpu core when request the first instance
on the core.
one vpu core can only support 8 streaming instances in the same
time, the instance won't be added to core's list before streamon.

so the actual instance count may be greater then the number in
the core's list.

in pm resume callback, driver will resume the core immediately if
core's list is not empty.
but this check is not accurate,
if suspend during one instance is requested, but not streamon,
then after suspend, the core won't be resume, and led to instance failure.

use the request_count instead of the core's list to check
whether is the core needed to resume immediately after suspend.

And it can make the pm suspend and resume callback more clear.

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: platform: fix some double free in meson-ge2d and mtk-jpeg and s5p-mfc

video_unregister_device will release device internally. There is no need to
call video_device_release after video_unregister_device.

Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: amphion: don't change the colorspace reported by decoder.

decoder will report the colorspace information
which is parsed from the sequence header,
if they are unspecified, just let application to determine it,
don't change it in driver.

Fixes: 6de8d628df6ef ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: amphion: adjust the encoder's value range of gop size

adjust the value range of gop size from [0, 65535] to [1, 8000].
when the gop size is set to a too large value,
it may affect the encoded picture quality.
so constrain it to a reasonable range.

Fixes: 0401e659c1f92 ("media: amphion: add v4l2 m2m vpu encoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: amphion: insert picture startcode after seek for vc1g format

For format vc1, the amphion vpu requires driver to
help insert some custom startcode before sequence and frame.
the startcode is different for vc1l and vc1g format.

But the sequence startcode is only needed at the beginning,
and it's not expected after seek.
driver need to treat the codec header and the first frame after seek
as a normal frame, and insert picture startcode for it.

In previous patch, I just fix it for vc1l format,
and should fix the similar issue for vc1g too.

Fixes: e670f5d672ef (media: amphion: only insert the first sequence startcode for vc1l format)
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: cedrus: Fix endless loop in cedrus_h265_skip_bits()

The busy status bit may never de-assert if number of programmed skip
bits is incorrect, resulting in a kernel hang because the bit is polled
endlessly in the code. Fix it by adding timeout for the bit-polling.
This problem is reproducible by setting the data_bit_offset field of
the HEVC slice params to a wrong value by userspace.

Cc: stable@vger.kernel.org
Fixes: 7678c5462680 (media: cedrus: Fix decoding for some HEVC videos)
Reported-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>