Joanne Koong [Wed, 1 Mar 2023 15:49:49 +0000 (07:49 -0800)]
bpf: Add __uninit kfunc annotation
This patch adds __uninit as a kfunc annotation.
This will be useful for scenarios such as for example in dynptrs,
indicating whether the dynptr should be checked by the verifier as an
initialized or an uninitialized dynptr.
Without this annotation, the alternative would be needing to hard-code
in the verifier the specific kfunc to indicate that arg should be
treated as an uninitialized arg.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-7-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Joanne Koong [Wed, 1 Mar 2023 15:49:48 +0000 (07:49 -0800)]
bpf: Refactor verifier dynptr into get_dynptr_arg_reg
This commit refactors the logic for determining which register in a
function is the dynptr into "get_dynptr_arg_reg". This will be used
in the future when the dynptr reg for BPF_FUNC_dynptr_write will need
to be obtained in order to support writes for skb dynptrs.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-6-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Joanne Koong [Wed, 1 Mar 2023 15:49:47 +0000 (07:49 -0800)]
bpf: Define no-ops for externally called bpf dynptr functions
Some bpf dynptr functions will be called from places where
if CONFIG_BPF_SYSCALL is not set, then the dynptr function is
undefined. For example, when skb type dynptrs are added in the
next commit, dynptr functions are called from net/core/filter.c
This patch defines no-op implementations of these dynptr functions
so that they do not break compilation by being an undefined reference.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-5-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Joanne Koong [Wed, 1 Mar 2023 15:49:46 +0000 (07:49 -0800)]
bpf: Allow initializing dynptrs in kfuncs
This change allows kfuncs to take in an uninitialized dynptr as a
parameter. Before this change, only helper functions could successfully
use uninitialized dynptrs. This change moves the memory access check
(including stack state growing and slot marking) into
process_dynptr_func(), which both helpers and kfuncs call into.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-4-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Joanne Koong [Wed, 1 Mar 2023 15:49:45 +0000 (07:49 -0800)]
bpf: Refactor process_dynptr_func
This change cleans up process_dynptr_func's flow to be more intuitive
and updates some comments with more context.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-3-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Joanne Koong [Wed, 1 Mar 2023 15:49:44 +0000 (07:49 -0800)]
bpf: Support "sk_buff" and "xdp_buff" as valid kfunc arg types
The bpf mirror of the in-kernel sk_buff and xdp_buff data structures are
__sk_buff and xdp_md. Currently, when we pass in the program ctx to a
kfunc where the program ctx is a skb or xdp buffer, we reject the
program if the in-kernel definition is sk_buff/xdp_buff instead of
__sk_buff/xdp_md.
This change allows "sk_buff <--> __sk_buff" and "xdp_buff <--> xdp_md"
to be recognized as valid matches. The user program may pass in their
program ctx as a __sk_buff or xdp_md, and the in-kernel definition
of the kfunc may define this arg as a sk_buff or xdp_buff.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-2-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jose E. Marchesi [Tue, 28 Feb 2023 09:51:29 +0000 (10:51 +0100)]
bpf, docs: Document BPF insn encoding in term of stored bytes
[Changes from V4:
- s/regs:16/regs:8 in figure.]
[Changes from V3:
- Back to src_reg and dst_reg, since they denote register numbers
as opposed to the values stored in these registers.]
[Changes from V2:
- Use src and dst consistently in the document.
- Use a more graphical depiction of the 128-bit instruction.
- Remove `Where:' fragment.
- Clarify that unused bits are reserved and shall be zeroed.]
[Changes from V1:
- Use rst literal blocks for figures.
- Avoid using | in the basic instruction/pseudo instruction figure.
- Rebased to today's bpf-next master branch.]
This patch modifies instruction-set.rst so it documents the encoding
of BPF instructions in terms of how the bytes are stored (be it in an
ELF file or as bytes in a memory buffer to be loaded into the kernel
or some other BPF consumer) as opposed to how the instruction looks
like once loaded.
This is hopefully easier to understand by implementors looking to
generate and/or consume bytes conforming BPF instructions.
The patch also clarifies that the unused bytes in a pseudo-instruction
shall be cleared with zeros.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/87h6v6i0da.fsf_-_@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Vernet [Tue, 28 Feb 2023 15:28:45 +0000 (09:28 -0600)]
bpf: Fix bpf_cgroup_from_id() doxygen header
In commit
332ea1f697be ("bpf: Add bpf_cgroup_from_id() kfunc"), a new
bpf_cgroup_from_id() kfunc was added which allows a BPF program to
lookup and acquire a reference to a cgroup from a cgroup id. The
commit's doxygen comment seems to have copy-pasted fields, which causes
BPF kfunc helper documentation to fail to render:
<snip>/helpers.c:2114: warning: Excess function parameter 'cgrp'...
<snip>/helpers.c:2114: warning: Excess function parameter 'level'...
<snip>
<snip>/helpers.c:2114: warning: Excess function parameter 'level'...
This patch fixes the doxygen header.
Fixes:
332ea1f697be ("bpf: Add bpf_cgroup_from_id() kfunc")
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230228152845.294695-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jiaxun Yang [Tue, 28 Feb 2023 11:33:05 +0000 (11:33 +0000)]
bpf, mips: Implement R4000 workarounds for JIT
For R4000 erratas around multiplication and division instructions,
as our use of those instructions are always followed by mflo/mfhi
instructions, the only issue we need care is
"MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0" Errata 28:
"A double-word or a variable shift may give an incorrect result if
executed while an integer multiplication is in progress."
We just emit a mfhi $0 to ensure the operation is completed after
every multiplication instruction according to workaround suggestion
in the document.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Link: https://lore.kernel.org/bpf/20230228113305.83751-3-jiaxun.yang@flygoat.com
Jiaxun Yang [Tue, 28 Feb 2023 11:33:04 +0000 (11:33 +0000)]
bpf, mips: Implement DADDI workarounds for JIT
For DADDI errata we just workaround by disable immediate operation
for BPF_ADD / BPF_SUB to avoid generation of DADDIU.
All other use cases in JIT won't cause overflow thus they are all safe.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Link: https://lore.kernel.org/bpf/20230228113305.83751-2-jiaxun.yang@flygoat.com
Yonghong Song [Mon, 27 Feb 2023 22:49:43 +0000 (14:49 -0800)]
libbpf: Fix bpf_xdp_query() in old kernels
Commit
04d58f1b26a4("libbpf: add API to get XDP/XSK supported features")
added feature_flags to struct bpf_xdp_query_opts. If a user uses
bpf_xdp_query_opts with feature_flags member, the bpf_xdp_query()
will check whether 'netdev' family exists or not in the kernel.
If it does not exist, the bpf_xdp_query() will return -ENOENT.
But 'netdev' family does not exist in old kernels as it is
introduced in the same patch set as Commit
04d58f1b26a4.
So old kernel with newer libbpf won't work properly with
bpf_xdp_query() api call.
To fix this issue, if the return value of
libbpf_netlink_resolve_genl_family_id() is -ENOENT, bpf_xdp_query()
will just return 0, skipping the rest of xdp feature query.
This preserves backward compatibility.
Fixes:
04d58f1b26a4 ("libbpf: add API to get XDP/XSK supported features")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230227224943.1153459-1-yhs@fb.com
Ilya Leoshkevich [Mon, 20 Feb 2023 23:49:58 +0000 (00:49 +0100)]
libbpf: Document bpf_{btf,link,map,prog}_get_info_by_fd()
Replace the short informal description with the proper doc comments.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230220234958.764997-1-iii@linux.ibm.com
Puranjay Mohan [Thu, 23 Feb 2023 09:53:46 +0000 (09:53 +0000)]
libbpf: Fix arm syscall regs spec in bpf_tracing.h
The syscall register definitions for ARM in bpf_tracing.h doesn't define
the fifth parameter for the syscalls. Because of this some KPROBES based
selftests fail to compile for ARM architecture.
Define the fifth parameter that is passed in the R5 register (uregs[4]).
Fixes:
3a95c42d65d5 ("libbpf: Define arm syscall regs spec in bpf_tracing.h")
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230223095346.10129-1-puranjay12@gmail.com
Rong Tao [Fri, 24 Feb 2023 15:10:02 +0000 (23:10 +0800)]
selftests/bpf: Fix compilation errors: Assign a value to a constant
Commit
bc292ab00f6c("mm: introduce vma->vm_flags wrapper functions")
turns the vm_flags into a const variable.
Added bpf_find_vma test in commit
f108662b27c9("selftests/bpf: Add tests
for bpf_find_vma") to assign values to variables that declare const in
find_vma_fail1.c programs, which is an error to the compiler and does not
test BPF verifiers. It is better to replace 'const vm_flags_t vm_flags'
with 'unsigned long vm_start' for testing.
$ make -C tools/testing/selftests/bpf/ -j8
...
progs/find_vma_fail1.c:16:16: error: cannot assign to non-static data
member 'vm_flags' with const-qualified type 'const vm_flags_t' (aka
'const unsigned long')
vma->vm_flags |= 0x55;
~~~~~~~~~~~~~ ^
../tools/testing/selftests/bpf/tools/include/vmlinux.h:1898:20:
note: non-static data member 'vm_flags' declared const here
const vm_flags_t vm_flags;
~~~~~~~~~~~`~~~~~~^~~~~~~~
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/tencent_CB281722B3C1BD504C16CDE586CACC2BE706@qq.com
Luis Gerhorst [Mon, 27 Feb 2023 15:08:54 +0000 (16:08 +0100)]
tools: bpftool: Remove invalid \' json escape
RFC8259 ("The JavaScript Object Notation (JSON) Data Interchange
Format") only specifies \", \\, \/, \b, \f, \n, \r, and \r as valid
two-character escape sequences. This does not include \', which is not
required in JSON because it exclusively uses double quotes as string
separators.
Solidus (/) may be escaped, but does not have to. Only reverse
solidus (\), double quotes ("), and the control characters have to be
escaped. Therefore, with this fix, bpftool correctly supports all valid
two-character escape sequences (but still does not support characters
that require multi-character escape sequences).
Witout this fix, attempting to load a JSON file generated by bpftool
using Python 3.10.6's default json.load() may fail with the error
"Invalid \escape" if the file contains the invalid escaped single
quote (\').
Fixes:
b66e907cfee2 ("tools: bpftool: copy JSON writer from iproute2 repository")
Signed-off-by: Luis Gerhorst <gerhorst@cs.fau.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230227150853.16863-1-gerhorst@cs.fau.de
Tiezhu Yang [Fri, 24 Feb 2023 10:36:55 +0000 (18:36 +0800)]
selftests/bpf: Use __NR_prlimit64 instead of __NR_getrlimit in user_ringbuf test
After commit
80d7da1cac62 ("asm-generic: Drop getrlimit and setrlimit
syscalls from default list"), new architectures won't need to include
getrlimit and setrlimit, they are superseded with prlimit64.
In order to maintain compatibility for the new architectures, such as
LoongArch which does not define __NR_getrlimit, it is better to use
__NR_prlimit64 instead of __NR_getrlimit in user_ringbuf test to fix
the following build error:
TEST-OBJ [test_progs] user_ringbuf.test.o
tools/testing/selftests/bpf/prog_tests/user_ringbuf.c: In function 'kick_kernel_cb':
tools/testing/selftests/bpf/prog_tests/user_ringbuf.c:593:17: error: '__NR_getrlimit' undeclared (first use in this function)
593 | syscall(__NR_getrlimit);
| ^~~~~~~~~~~~~~
tools/testing/selftests/bpf/prog_tests/user_ringbuf.c:593:17: note: each undeclared identifier is reported only once for each function it appears in
make: *** [Makefile:573: tools/testing/selftests/bpf/user_ringbuf.test.o] Error 1
make: Leaving directory 'tools/testing/selftests/bpf'
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1677235015-21717-4-git-send-email-yangtiezhu@loongson.cn
Tiezhu Yang [Fri, 24 Feb 2023 10:36:53 +0000 (18:36 +0800)]
libbpf: Use struct user_pt_regs to define __PT_REGS_CAST() for LoongArch
LoongArch provides struct user_pt_regs instead of struct pt_regs
to userspace, use struct user_pt_regs to define __PT_REGS_CAST()
to fix the following build error:
CLNG-BPF [test_maps] loop1.bpf.o
progs/loop1.c:22:9: error: incomplete definition of type 'struct pt_regs'
m = PT_REGS_RC(ctx);
^~~~~~~~~~~~~~~
tools/testing/selftests/bpf/tools/include/bpf/bpf_tracing.h:493:41: note: expanded from macro 'PT_REGS_RC'
#define PT_REGS_RC(x) (__PT_REGS_CAST(x)->__PT_RC_REG)
~~~~~~~~~~~~~~~~~^
tools/testing/selftests/bpf/tools/include/bpf/bpf_helper_defs.h:20:8: note: forward declaration of 'struct pt_regs'
struct pt_regs;
^
1 error generated.
make: *** [Makefile:572: tools/testing/selftests/bpf/loop1.bpf.o] Error 1
make: Leaving directory 'tools/testing/selftests/bpf'
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1677235015-21717-2-git-send-email-yangtiezhu@loongson.cn
Martin KaFai Lau [Sat, 25 Feb 2023 01:16:15 +0000 (17:16 -0800)]
Merge branch 'move SYS() macro to test_progs.h and run mptcp in a dedicated netns'
Hangbin Liu says:
====================
As Martin suggested, let's move the SYS() macro to test_progs.h since
a lot of programs are using it. After that, let's run mptcp in a dedicated
netns to avoid user config influence.
v3: fix fd redirect typo. Move SYS() macro into the test_progs.h
v2: remove unneed close_cgroup_fd goto label.
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Hangbin Liu [Fri, 24 Feb 2023 06:13:43 +0000 (14:13 +0800)]
selftests/bpf: run mptcp in a dedicated netns
The current mptcp test is run in init netns. If the user or default
system config disabled mptcp, the test will fail. Let's run the mptcp
test in a dedicated netns to avoid none kernel default mptcp setting.
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230224061343.506571-3-liuhangbin@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Hangbin Liu [Fri, 24 Feb 2023 06:13:42 +0000 (14:13 +0800)]
selftests/bpf: move SYS() macro into the test_progs.h
A lot of tests defined SYS() macro to run system calls with goto label.
Let's move this macro to test_progs.h and add configurable
"goto_label" as the first arg.
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20230224061343.506571-2-liuhangbin@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Tejun Heo [Thu, 23 Feb 2023 01:29:58 +0000 (15:29 -1000)]
selftests/bpf: Add a test case for bpf_cgroup_from_id()
Add a test case for bpf_cgroup_from_id.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/Y/bBlt+tPozcQgws@slm.duckdns.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tejun Heo [Thu, 23 Feb 2023 01:29:12 +0000 (15:29 -1000)]
bpf: Add bpf_cgroup_from_id() kfunc
cgroup ID is an userspace-visible 64bit value uniquely identifying a given
cgroup. As the IDs are used widely, it's useful to be able to look up the
matching cgroups. Add bpf_cgroup_from_id().
v2: Separate out selftest into its own patch as suggested by Alexei.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/Y/bBaG96t0/gQl9/@slm.duckdns.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Dave Thaler [Mon, 20 Feb 2023 22:37:42 +0000 (22:37 +0000)]
bpf, docs: Add explanation of endianness
Document the discussion from the email thread on the IETF bpf list,
where it was explained that the raw format varies by endianness
of the processor.
Signed-off-by: Dave Thaler <dthaler@microsoft.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230220223742.1347-1-dthaler1968@googlemail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stanislav Fomichev [Tue, 21 Feb 2023 18:05:18 +0000 (10:05 -0800)]
selftests/bpf: Fix BPF_FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL for empty flow label
Kernel's flow dissector continues to parse the packet when
the (optional) IPv6 flow label is empty even when instructed
to stop (via BPF_FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL). Do
the same in our reference BPF reimplementation.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230221180518.2139026-1-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pu Lehui [Tue, 21 Feb 2023 14:06:56 +0000 (22:06 +0800)]
riscv, bpf: Add kfunc support for RV64
This patch adds kernel function call support for RV64. Since the offset
from RV64 kernel and module functions to bpf programs is almost within
the range of s32, the current infrastructure of RV64 is already
sufficient for kfunc, so let's turn it on.
Suggested-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230221140656.3480496-1-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Mon, 20 Feb 2023 16:37:56 +0000 (17:37 +0100)]
bpf: Check for helper calls in check_subprogs()
The condition src_reg != BPF_PSEUDO_CALL && imm == BPF_FUNC_tail_call
may be satisfied by a kfunc call. This would lead to unnecessarily
setting has_tail_call. Use src_reg == 0 instead.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230220163756.753713-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Hengqi Chen [Sat, 18 Feb 2023 10:53:17 +0000 (10:53 +0000)]
LoongArch: BPF: Support mixing bpf2bpf and tailcalls
The current implementation already allow such mixing.
Let's enable it in JIT.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Link: https://lore.kernel.org/r/20230218105317.4139666-1-hengqi.chen@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Florent Revest [Fri, 17 Feb 2023 15:18:32 +0000 (16:18 +0100)]
selftests/bpf: Fix cross compilation with CLANG_CROSS_FLAGS
I cross-compile my BPF selftests with the following command:
CLANG_CROSS_FLAGS="--target=aarch64-linux-gnu --sysroot=/sysroot/" \
make LLVM=1 CC=clang CROSS_COMPILE=aarch64-linux-gnu- SRCARCH=arm64
(Note the use of CLANG_CROSS_FLAGS to specify a custom sysroot instead
of letting clang use gcc's default sysroot)
However, CLANG_CROSS_FLAGS gets propagated to host tools builds (libbpf
and bpftool) and because they reference it directly in their Makefiles,
they end up cross-compiling host objects which results in linking
errors.
This patch ensures that CLANG_CROSS_FLAGS is reset if CROSS_COMPILE
isn't set (for example when reaching a BPF host tool build).
Signed-off-by: Florent Revest <revest@chromium.org>
Link: https://lore.kernel.org/r/20230217151832.27784-1-revest@chromium.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tiezhu Yang [Thu, 16 Feb 2023 07:51:01 +0000 (15:51 +0800)]
selftests/bpf: Remove not used headers
The following three uapi headers:
tools/arch/arm64/include/uapi/asm/bpf_perf_event.h
tools/arch/s390/include/uapi/asm/bpf_perf_event.h
tools/arch/s390/include/uapi/asm/ptrace.h
were introduced in commit
618e165b2a8e ("selftests/bpf: sync kernel headers
and introduce arch support in Makefile"), they are not used any more after
commit
720f228e8d31 ("bpf: fix broken BPF selftest build"), so remove them.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1676533861-27508-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Hou Tao [Thu, 16 Feb 2023 02:48:21 +0000 (10:48 +0800)]
bpf: Only allocate one bpf_mem_cache for bpf_cpumask_ma
The size of bpf_cpumask is fixed, so there is no need to allocate many
bpf_mem_caches for bpf_cpumask_ma, just one bpf_mem_cache is enough.
Also add comments for bpf_mem_alloc_init() in bpf_mem_alloc.h to prevent
future miuse.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230216024821.2202916-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kumar Kartikeya Dwivedi [Tue, 21 Feb 2023 20:06:45 +0000 (21:06 +0100)]
bpf: Wrap register invalidation with a helper
Typically, verifier should use env->allow_ptr_leaks when invaliding
registers for users that don't have CAP_PERFMON or CAP_SYS_ADMIN to
avoid leaking the pointer value. This is similar in spirit to
c67cae551f0d ("bpf: Tighten ptr_to_btf_id checks."). In a lot of the
existing checks, we know the capabilities are present, hence we don't do
the check.
Instead of being inconsistent in the application of the check, wrap the
action of invalidating a register into a helper named 'mark_invalid_reg'
and use it in a uniform fashion to replace open coded invalidation
operations, so that the check is always made regardless of the call site
and we don't have to remember whether it needs to be done or not for
each case.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230221200646.2500777-7-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kumar Kartikeya Dwivedi [Tue, 21 Feb 2023 20:06:44 +0000 (21:06 +0100)]
bpf: Fix check_reg_type for PTR_TO_BTF_ID
The current code does type matching for the case where reg->type is
PTR_TO_BTF_ID or has the PTR_TRUSTED flag. However, this only needs to
occur for non-MEM_ALLOC and non-MEM_PERCPU cases, but will include both
as per the current code.
The MEM_ALLOC case with or without PTR_TRUSTED needs to be handled
specially by the code for type_is_alloc case, while MEM_PERCPU case must
be ignored. Hence, to restore correct behavior and for clarity,
explicitly list out the handled PTR_TO_BTF_ID types which should be
handled for each case using a switch statement.
Helpers currently only take:
PTR_TO_BTF_ID
PTR_TO_BTF_ID | PTR_TRUSTED
PTR_TO_BTF_ID | MEM_RCU
PTR_TO_BTF_ID | MEM_ALLOC
PTR_TO_BTF_ID | MEM_PERCPU
PTR_TO_BTF_ID | MEM_PERCPU | PTR_TRUSTED
This fix was also described (for the MEM_ALLOC case) in [0].
[0]: https://lore.kernel.org/bpf/
20221121160657.h6z7xuvedybp5y7s@apollo
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230221200646.2500777-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kumar Kartikeya Dwivedi [Tue, 21 Feb 2023 20:06:43 +0000 (21:06 +0100)]
bpf: Remove unused MEM_ALLOC | PTR_TRUSTED checks
The plan is to supposedly tag everything with PTR_TRUSTED eventually,
however those changes should bring in their respective code, instead
of leaving it around right now. It is arguable whether PTR_TRUSTED is
required for all types, when it's only use case is making PTR_TO_BTF_ID
a bit stronger, while all other types are trusted by default.
Hence, just drop the two instances which do not occur in the verifier
for now to avoid reader confusion.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230221200646.2500777-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kumar Kartikeya Dwivedi [Tue, 21 Feb 2023 20:06:42 +0000 (21:06 +0100)]
bpf: Annotate data races in bpf_local_storage
There are a few cases where hlist_node is checked to be unhashed without
holding the lock protecting its modification. In this case, one must use
hlist_unhashed_lockless to avoid load tearing and KCSAN reports. Fix
this by using lockless variant in places not protected by the lock.
Since this is not prompted by any actual KCSAN reports but only from
code review, I have not included a fixes tag.
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230221200646.2500777-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov [Wed, 22 Feb 2023 20:34:51 +0000 (12:34 -0800)]
Merge branch 'bpf: Allow reads from uninit stack'
Eduard Zingerman says:
====================
This patch-set modifies BPF verifier to accept programs that read from
uninitialized stack locations, but only if executed in privileged mode.
This provides significant verification performance gains: 30% to 70% less
processed states for big number of test programs.
The reason for performance gains comes from treating STACK_MISC and
STACK_INVALID as compatible, when cached state is compared to current state
in verifier.c:stacksafe().
The change should not affect safety, because any value read from STACK_MISC
location has full binary range (e.g. 0x00-0xff for byte-sized reads).
Details and measurements are provided in the description for the patch #1.
The change was suggested by Andrii Nakryiko, the initial patch was created
by Alexei Starovoitov. The discussion could be found at [1].
Changes v1 -> v2 (v1 available at [2]):
- Calls to helper functions now convert STACK_INVALID to STACK_MISC
(suggested by Andrii);
- The test case progs/test_global_func10.c is updated to expect new
error message. Before recent commit [3] exact content of error
messages was not verified for this test.
- Replaced incorrect '//'-style comments in test case asm blocks by
'/*...*/'-style comments in order to fix compilation issues;
- Changed the tag from "Suggested-By" to "Co-developed-by" for Alexei
on patch #1, please let me know if this is appropriate use of the tag.
[1] https://lore.kernel.org/bpf/CAADnVQKs2i1iuZ5SUGuJtxWVfGYR9kDgYKhq3rNV+kBLQCu7rA@mail.gmail.com/
[2] https://lore.kernel.org/bpf/
20230216183606.2483834-1-eddyz87@gmail.com/
[3]
95ebb376176c ("selftests/bpf: Convert test_global_funcs test to test_loader framework")
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Eduard Zingerman [Sun, 19 Feb 2023 20:04:27 +0000 (22:04 +0200)]
selftests/bpf: Tests for uninitialized stack reads
Three testcases to make sure that stack reads from uninitialized
locations are accepted by verifier when executed in privileged mode:
- read from a fixed offset;
- read from a variable offset;
- passing a pointer to stack to a helper converts
STACK_INVALID to STACK_MISC.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230219200427.606541-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Eduard Zingerman [Sun, 19 Feb 2023 20:04:26 +0000 (22:04 +0200)]
bpf: Allow reads from uninit stack
This commits updates the following functions to allow reads from
uninitialized stack locations when env->allow_uninit_stack option is
enabled:
- check_stack_read_fixed_off()
- check_stack_range_initialized(), called from:
- check_stack_read_var_off()
- check_helper_mem_access()
Such change allows to relax logic in stacksafe() to treat STACK_MISC
and STACK_INVALID in a same way and make the following stack slot
configurations equivalent:
| Cached state | Current state |
| stack slot | stack slot |
|------------------+------------------|
| STACK_INVALID or | STACK_INVALID or |
| STACK_MISC | STACK_SPILL or |
| | STACK_MISC or |
| | STACK_ZERO or |
| | STACK_DYNPTR |
This leads to significant verification speed gains (see below).
The idea was suggested by Andrii Nakryiko [1] and initial patch was
created by Alexei Starovoitov [2].
Currently the env->allow_uninit_stack is allowed for programs loaded
by users with CAP_PERFMON or CAP_SYS_ADMIN capabilities.
A number of test cases from verifier/*.c were expecting uninitialized
stack access to be an error. These test cases were updated to execute
in unprivileged mode (thus preserving the tests).
The test progs/test_global_func10.c expected "invalid indirect read
from stack" error message because of the access to uninitialized
memory region. This error is no longer possible in privileged mode.
The test is updated to provoke an error "invalid indirect access to
stack" because of access to invalid stack address (such error is not
verified by progs/test_global_func*.c series of tests).
The following tests had to be removed because these can't be made
unprivileged:
- verifier/sock.c:
- "sk_storage_get(map, skb->sk, &stack_value, 1): partially init
stack_value"
BPF_PROG_TYPE_SCHED_CLS programs are not executed in unprivileged mode.
- verifier/var_off.c:
- "indirect variable-offset stack access, max_off+size > max_initialized"
- "indirect variable-offset stack access, uninitialized"
These tests verify that access to uninitialized stack values is
detected when stack offset is not a constant. However, variable
stack access is prohibited in unprivileged mode, thus these tests
are no longer valid.
* * *
Here is veristat log comparing this patch with current master on a
set of selftest binaries listed in tools/testing/selftests/bpf/veristat.cfg
and cilium BPF binaries (see [3]):
$ ./veristat -e file,prog,states -C -f 'states_pct<-30' master.log current.log
File Program States (A) States (B) States (DIFF)
-------------------------- -------------------------- ---------- ---------- ----------------
bpf_host.o tail_handle_ipv6_from_host 349 244 -105 (-30.09%)
bpf_host.o tail_handle_nat_fwd_ipv4 1320 895 -425 (-32.20%)
bpf_lxc.o tail_handle_nat_fwd_ipv4 1320 895 -425 (-32.20%)
bpf_sock.o cil_sock4_connect 70 48 -22 (-31.43%)
bpf_sock.o cil_sock4_sendmsg 68 46 -22 (-32.35%)
bpf_xdp.o tail_handle_nat_fwd_ipv4 1554 803 -751 (-48.33%)
bpf_xdp.o tail_lb_ipv4 6457 2473 -3984 (-61.70%)
bpf_xdp.o tail_lb_ipv6 7249 3908 -3341 (-46.09%)
pyperf600_bpf_loop.bpf.o on_event 287 145 -142 (-49.48%)
strobemeta.bpf.o on_event 15915 4772 -11143 (-70.02%)
strobemeta_nounroll2.bpf.o on_event 17087 3820 -13267 (-77.64%)
xdp_synproxy_kern.bpf.o syncookie_tc 21271 6635 -14636 (-68.81%)
xdp_synproxy_kern.bpf.o syncookie_xdp 23122 6024 -17098 (-73.95%)
-------------------------- -------------------------- ---------- ---------- ----------------
Note: I limited selection by states_pct<-30%.
Inspection of differences in pyperf600_bpf_loop behavior shows that
the following patch for the test removes almost all differences:
- a/tools/testing/selftests/bpf/progs/pyperf.h
+ b/tools/testing/selftests/bpf/progs/pyperf.h
@ -266,8 +266,8 @ int __on_event(struct bpf_raw_tracepoint_args *ctx)
}
if (event->pthread_match || !pidData->use_tls) {
- void* frame_ptr;
- FrameData frame;
+ void* frame_ptr = 0;
+ FrameData frame = {};
Symbol sym = {};
int cur_cpu = bpf_get_smp_processor_id();
W/o this patch the difference comes from the following pattern
(for different variables):
static bool get_frame_data(... FrameData *frame ...)
{
...
bpf_probe_read_user(&frame->f_code, ...);
if (!frame->f_code)
return false;
...
bpf_probe_read_user(&frame->co_name, ...);
if (frame->co_name)
...;
}
int __on_event(struct bpf_raw_tracepoint_args *ctx)
{
FrameData frame;
...
get_frame_data(... &frame ...) // indirectly via a bpf_loop & callback
...
}
SEC("raw_tracepoint/kfree_skb")
int on_event(struct bpf_raw_tracepoint_args* ctx)
{
...
ret |= __on_event(ctx);
ret |= __on_event(ctx);
...
}
With regards to value `frame->co_name` the following is important:
- Because of the conditional `if (!frame->f_code)` each call to
__on_event() produces two states, one with `frame->co_name` marked
as STACK_MISC, another with it as is (and marked STACK_INVALID on a
first call).
- The call to bpf_probe_read_user() does not mark stack slots
corresponding to `&frame->co_name` as REG_LIVE_WRITTEN but it marks
these slots as BPF_MISC, this happens because of the following loop
in the check_helper_call():
for (i = 0; i < meta.access_size; i++) {
err = check_mem_access(env, insn_idx, meta.regno, i, BPF_B,
BPF_WRITE, -1, false);
if (err)
return err;
}
Note the size of the write, it is a one byte write for each byte
touched by a helper. The BPF_B write does not lead to write marks
for the target stack slot.
- Which means that w/o this patch when second __on_event() call is
verified `if (frame->co_name)` will propagate read marks first to a
stack slot with STACK_MISC marks and second to a stack slot with
STACK_INVALID marks and these states would be considered different.
[1] https://lore.kernel.org/bpf/CAEf4BzY3e+ZuC6HUa8dCiUovQRg2SzEk7M-dSkqNZyn=xEmnPA@mail.gmail.com/
[2] https://lore.kernel.org/bpf/CAADnVQKs2i1iuZ5SUGuJtxWVfGYR9kDgYKhq3rNV+kBLQCu7rA@mail.gmail.com/
[3] git@github.com:anakryiko/cilium.git
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Co-developed-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230219200427.606541-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Linus Torvalds [Wed, 22 Feb 2023 02:24:12 +0000 (18:24 -0800)]
Merge tag 'net-next-6.3' of git://git./linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
Linus Torvalds [Wed, 22 Feb 2023 02:10:50 +0000 (18:10 -0800)]
Merge tag 'v6.3-p1' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Use kmap_local instead of kmap_atomic
- Change request callback to take void pointer
- Print FIPS status in /proc/crypto (when enabled)
Algorithms:
- Add rfc4106/gcm support on arm64
- Add ARIA AVX2/512 support on x86
Drivers:
- Add TRNG driver for StarFive SoC
- Delete ux500/hash driver (subsumed by stm32/hash)
- Add zlib support in qat
- Add RSA support in aspeed"
* tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits)
crypto: x86/aria-avx - Do not use avx2 instructions
crypto: aspeed - Fix modular aspeed-acry
crypto: hisilicon/qm - fix coding style issues
crypto: hisilicon/qm - update comments to match function
crypto: hisilicon/qm - change function names
crypto: hisilicon/qm - use min() instead of min_t()
crypto: hisilicon/qm - remove some unused defines
crypto: proc - Print fips status
crypto: crypto4xx - Call dma_unmap_page when done
crypto: octeontx2 - Fix objects shared between several modules
crypto: nx - Fix sparse warnings
crypto: ecc - Silence sparse warning
tls: Pass rec instead of aead_req into tls_encrypt_done
crypto: api - Remove completion function scaffolding
tls: Remove completion function scaffolding
tipc: Remove completion function scaffolding
net: ipv6: Remove completion function scaffolding
net: ipv4: Remove completion function scaffolding
net: macsec: Remove completion function scaffolding
dm: Remove completion function scaffolding
...
Linus Torvalds [Wed, 22 Feb 2023 01:32:50 +0000 (17:32 -0800)]
Merge tag 'platform-drivers-x86-v6.3-1' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD PMC: Improvements to aid s2idle debugging
- Dell WMI-DDV: hwmon support
- INT3472 camera sensor power-management: Improve privacy LED support
- Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule
Interface) support
- Mellanox: SN5600 and Nvidia L1 switch support
- Microsoft Surface Support: Various cleanups + code improvements
- tools/intel-speed-select: Various improvements
- Miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits)
platform/x86: nvidia-wmi-ec-backlight: Add force module parameter
platform/x86/amd/pmf: Add depends on CONFIG_POWER_SUPPLY
platform/x86: dell-ddv: Prefer asynchronous probing
platform/x86: dell-ddv: Add hwmon support
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform: mellanox: mlx-platform: Move bus shift assignment out of the loop
platform: mellanox: mlx-platform: Add mux selection register to regmap
platform_data/mlxreg: Add field with mapped resource address
platform/mellanox: mlxreg-hotplug: Allow more flexible hotplug events configuration
platform: mellanox: Extend all systems with I2C notification callback
platform: mellanox: Split logic in init and exit flow
platform: mellanox: Split initialization procedure
platform: mellanox: Introduce support of new Nvidia L1 switch
platform: mellanox: Introduce support for next-generation 800GB/s switch
platform: mellanox: Cosmetic changes - rename to more common name
platform: mellanox: Change "reset_pwr_converter_fail" attribute
platform: mellanox: Introduce support for rack manager switch
MAINTAINERS: dell-wmi-sysman: drop Divya Bharathi
x86/platform/uv: Make kobj_type structure constant
platform/x86: think-lmi: Make kobj_type structure constant
...
Linus Torvalds [Wed, 22 Feb 2023 01:23:39 +0000 (17:23 -0800)]
Merge tag 'tag-chrome-platform-for-v6.3' of git://git./linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New drivers:
- cros_ec_uart for ChromeOS EC protocol over UART
- cros_typec_vdm for USB PD Vendor Defined Message
Improvements:
- Preserve logs as much as possible when EC panics
- Shutdown to refrain from potential HW damages when EC panics
Fixes:
- Fix DP_PORT_VDO to include DP_CAP_RECEPTACLE
- Fix a lockdep false positive
Cleanups:
- Use sysfs_emit*() instead of scnprintf()
- Use asm instead of asm-generic for unaligned.h
Misc:
- Rename module name from cros_ec_typec to cros-ec-typec
- Minor fixes"
* tag 'tag-chrome-platform-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (34 commits)
platform/chrome: cros_ec_typec: Fix spelling mistake
platform/chrome: cros_typec_vdm: Add Attention support
platform/chrome: cros_ec: Add VDM attention headers
platform/chrome: cros_typec_vdm: Fix VDO copy
platform/chrome: cros_ec_typec: allow deferred probe of switch handles
platform/chrome: cros_ec_proto: remove big stub objects from stack
platform/chrome: cros_ec_uart: fix negative type promoted to high
platform/chrome: cros_ec: Use per-device lockdep key
platform/chrome: fix kernel-doc warnings for cros_ec_command
platform/chrome: fix kernel-doc warning for last_resume_result
platform/chrome: fix kernel-doc warning for suspend_timeout_ms
platform/chrome: fix kernel-doc warnings for panic notifier
platform/chrome: cros_ec_lpc: initialize the buf variable
platform/chrome: cros_ec: Fix panic notifier registration
platform/chrome: cros_typec_switch: Check for retimer flag
platform/chrome: cros_typec_switch: Use fwnode* prop check
platform/chrome: cros_typec_vdm: Add VDM send support
platform/chrome: cros_typec_vdm: Add VDM reply support
platform/chrome: cros_ec_typec: Add initial VDM support
platform/chrome: cros_ec_typec: Alter module name with hyphens
...
Linus Torvalds [Wed, 22 Feb 2023 01:07:39 +0000 (17:07 -0800)]
Merge tag 'for-linus-6.3-rc1-tag' of git://git./linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- help deprecate the /proc/xen files by making the related information
available via sysfs
- mark the Xen variants of play_dead "noreturn"
- support a shared Xen platform interrupt
- several small cleanups and fixes
* tag 'for-linus-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: sysfs: make kobj_type structure constant
x86/Xen: drop leftover VM-assist uses
xen: Replace one-element array with flexible-array member
xen/grant-dma-iommu: Implement a dummy probe_device() callback
xen/pvcalls-back: fix permanently masked event channel
xen: Allow platform PCI interrupt to be shared
x86/xen/time: prefer tsc as clocksource when it is invariant
x86/xen: mark xen_pv_play_dead() as __noreturn
x86/xen: don't let xen_pv_play_dead() return
drivers/xen/hypervisor: Expose Xen SIF flags to userspace
Linus Torvalds [Wed, 22 Feb 2023 00:59:23 +0000 (16:59 -0800)]
Merge tag 'hyperv-next-signed-
20230220' of git://git./linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- allow Linux to run as the nested root partition for Microsoft
Hypervisor (Jinank Jain and Nuno Das Neves)
- clean up the return type of callback functions (Dawei Li)
* tag 'hyperv-next-signed-
20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Fix hv_get/set_register for nested bringup
Drivers: hv: Make remove callback of hyperv driver void returned
Drivers: hv: Enable vmbus driver for nested root partition
x86/hyperv: Add an interface to do nested hypercalls
Drivers: hv: Setup synic registers in case of nested root partition
x86/hyperv: Add support for detecting nested hypervisor
Linus Torvalds [Tue, 21 Feb 2023 23:27:48 +0000 (15:27 -0800)]
Merge tag 'arm64-upstream' of git://git./linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit
architectural register (ZT0, for the look-up table feature) that
Linux needs to save/restore
- Include TPIDR2 in the signal context and add the corresponding
kselftests
- Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI
support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG
(ARM CMN) at probe time
- Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64
- Permit EFI boot with MMU and caches on. Instead of cleaning the
entire loaded kernel image to the PoC and disabling the MMU and
caches before branching to the kernel bare metal entry point, leave
the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of
all of system RAM to populate the initial page tables
- Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64
kernel (the arm32 kernel only defines the values)
- Harden the arm64 shadow call stack pointer handling: stash the shadow
stack pointer in the task struct on interrupt, load it directly from
this structure
- Signal handling cleanups to remove redundant validation of size
information and avoid reading the same data from userspace twice
- Refactor the hwcap macros to make use of the automatically generated
ID registers. It should make new hwcaps writing less error prone
- Further arm64 sysreg conversion and some fixes
- arm64 kselftest fixes and improvements
- Pointer authentication cleanups: don't sign leaf functions, unify
asm-arch manipulation
- Pseudo-NMI code generation optimisations
- Minor fixes for SME and TPIDR2 handling
- Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable,
replace strtobool() to kstrtobool() in the cpufeature.c code, apply
dynamic shadow call stack in two passes, intercept pfn changes in
set_pte_at() without the required break-before-make sequence, attempt
to dump all instructions on unhandled kernel faults
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits)
arm64: fix .idmap.text assertion for large kernels
kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests
kselftest/arm64: Copy whole EXTRA context
arm64: kprobes: Drop ID map text from kprobes blacklist
perf: arm_spe: Print the version of SPE detected
perf: arm_spe: Add support for SPEv1.2 inverted event filtering
perf: Add perf_event_attr::config3
arm64/sme: Fix __finalise_el2 SMEver check
drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable
arm64/signal: Only read new data when parsing the ZT context
arm64/signal: Only read new data when parsing the ZA context
arm64/signal: Only read new data when parsing the SVE context
arm64/signal: Avoid rereading context frame sizes
arm64/signal: Make interface for restore_fpsimd_context() consistent
arm64/signal: Remove redundant size validation from parse_user_sigframe()
arm64/signal: Don't redundantly verify FPSIMD magic
arm64/cpufeature: Use helper macros to specify hwcaps
arm64/cpufeature: Always use symbolic name for feature value in hwcaps
arm64/sysreg: Initial unsigned annotations for ID registers
arm64/sysreg: Initial annotation of signed ID registers
...
Linus Torvalds [Tue, 21 Feb 2023 23:21:29 +0000 (15:21 -0800)]
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM udpates from Russell King:
- Improve Kconfig help text for Cortex A8 and Cortex A9 errata
- Kconfig spelling and grammar fixes
- Allow kernel-mode VFP/Neon in softirq context
- Use Neon in softirq context
- Implement AES-CTR/GHASH version of GCM
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9289/1: Allow pre-ARMv5 builds with ld.lld 16.0.0 and newer
ARM: 9288/1: Kconfigs: fix spelling & grammar
ARM: 9286/1: crypto: Implement fused AES-CTR/GHASH version of GCM
ARM: 9285/1: remove meaningless arch/arm/mach-rda/Makefile
ARM: 9283/1: permit non-nested kernel mode NEON in softirq context
ARM: 9282/1: vfp: Manipulate task VFP state with softirqs disabled
ARM: 9281/1: improve Cortex A8/A9 errata help text
Linus Torvalds [Tue, 21 Feb 2023 23:17:34 +0000 (15:17 -0800)]
Merge tag 'm68k-for-v6.3-tag1' of git://git./linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Add seccomp support
- defconfig updates
- Miscellaneous fixes and improvements
* tag 'm68k-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: /proc/hardware should depend on PROC_FS
selftests/seccomp: Add m68k support
m68k: Add kernel seccomp support
m68k: Check syscall_trace_enter() return code
m68k: defconfig: Update defconfigs for v6.2-rc3
m68k: q40: Do not initialise statics to 0
Linus Torvalds [Tue, 21 Feb 2023 23:09:17 +0000 (15:09 -0800)]
Merge tag 's390-6.3-1' of git://git./linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Large cleanup of the con3270/tty3270 driver. Among others this fixes:
- Background Color Support
- ASCII Line Character Support
- VT100 Support
- Geometries other than 80x24
- Cleanup and improve cmpxchg() code. Also add cmpxchg_user_key() to
uaccess functions, which will be used by KVM to access KVM guest
memory with a specific storage key
- Add support for user space events counting to CPUMF
- Cleanup the vfio/ccw code, which also allows now to properly support
2K Format-2 IDALs
- Move kernel page table allocation and initialization to decompressor,
which finally allows to enter the kernel with dynamic address
translation enabled. This in turn allows to get rid of code with
special handling in the kernel, which has to distinguish if DAT is on
or off
- Replace kretprobe with rethook
- Various improvements to vfio/ap queue resets:
- Use TAPQ to verify completion of a reset in progress rather than
multiple invocations of ZAPQ.
- Check TAPQ response codes when verifying successful completion of
ZAPQ.
- Fix erroneous handling of some error response codes.
- Increase the maximum amount of time to wait for successful
completion of ZAPQ
- Rework system call wrappers to get rid of alias functions, which were
only left on s390
- Cleanup diag288_wdt watchdog driver. It has been agreed on with
Guenter Roeck that this goes upstream via the s390 tree
- Add missing loadparm parameter handling for list-directed ECKD
ipl/reipl
- Various improvements to memory detection code
- Remove arch_cpu_idle_time() since the current implementation is
broken, and allows user space observable accounted idle times which
can temporarily decrease
- Add Reset DAT-Protection support: (only) allow to change PTEs from RO
to RW with a new RDP instruction. Unlike the currently used IPTE
instruction, this does not necessarily guarantee that TLBs of all
CPUs are synchronously flushed; and that remote CPUs can see spurious
protection faults. The overall improvement for not requiring an all
CPU synchronization, like it is required with IPTE, should be
beneficial
- Fix KFENCE page fault reporting
- Smaller cleanups and improvement all over the place
* tag 's390-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (182 commits)
s390/irq,idle: simplify idle check
s390/processor: add test_and_set_cpu_flag() and test_and_clear_cpu_flag()
s390/processor: let cpu helper functions return boolean values
s390/kfence: fix page fault reporting
s390/zcrypt: introduce ctfm field in struct CPRBX
s390: remove confusing comment from uapi types header file
vfio/ccw: remove WARN_ON during shutdown
s390/entry: remove toolchain dependent micro-optimization
s390/mem_detect: do not truncate online memory ranges info
s390/vx: remove __uint128_t type from __vector128 struct again
s390/mm: add support for RDP (Reset DAT-Protection)
s390/mm: define private VM_FAULT_* reasons from top bits
Documentation: s390: correct spelling
s390/ap: fix status returned by ap_qact()
s390/ap: fix status returned by ap_aqic()
s390: vfio-ap: tighten the NIB validity check
Revert "s390/mem_detect: do not update output parameters on failure"
s390/idle: remove arch_cpu_idle_time() and corresponding code
s390/vx: use simple assignments to access __vector128 members
s390/vx: add 64 and 128 bit members to __vector128 struct
...
Linus Torvalds [Tue, 21 Feb 2023 22:51:40 +0000 (14:51 -0800)]
Merge tag 'x86_cpu_for_v6.3_rc1' of git://git./linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Cache the AMD debug registers in per-CPU variables to avoid MSR
writes where possible, when supporting a debug registers swap feature
for SEV-ES guests
- Add support for AMD's version of eIBRS called Automatic IBRS which is
a set-and-forget control of indirect branch restriction speculation
resources on privilege change
- Add support for a new x86 instruction - LKGS - Load kernel GS which
is part of the FRED infrastructure
- Reset SPEC_CTRL upon init to accomodate use cases like kexec which
rediscover
- Other smaller fixes and cleanups
* tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd: Cache debug register values in percpu variables
KVM: x86: Propagate the AMD Automatic IBRS feature to the guest
x86/cpu: Support AMD Automatic IBRS
x86/cpu, kvm: Add the SMM_CTL MSR not present feature
x86/cpu, kvm: Add the Null Selector Clears Base feature
x86/cpu, kvm: Move X86_FEATURE_LFENCE_RDTSC to its native leaf
x86/cpu, kvm: Add the NO_NESTED_DATA_BP feature
KVM: x86: Move open-coded CPUID leaf 0x80000021 EAX bit propagation code
x86/cpu, kvm: Add support for CPUID_80000021_EAX
x86/gsseg: Add the new <asm/gsseg.h> header to <asm/asm-prototypes.h>
x86/gsseg: Use the LKGS instruction if available for load_gs_index()
x86/gsseg: Move load_gs_index() to its own new header file
x86/gsseg: Make asm_load_gs_index() take an u16
x86/opcode: Add the LKGS instruction to x86-opcode-map
x86/cpufeature: Add the CPU feature bit for LKGS
x86/bugs: Reset speculation control settings on init
x86/cpu: Remove redundant extern x86_read_arch_cap_msr()
Dave Hansen [Tue, 21 Feb 2023 20:30:15 +0000 (12:30 -0800)]
uaccess: Add speculation barrier to copy_from_user()
The results of "access_ok()" can be mis-speculated. The result is that
you can end speculatively:
if (access_ok(from, size))
// Right here
even for bad from/size combinations. On first glance, it would be ideal
to just add a speculation barrier to "access_ok()" so that its results
can never be mis-speculated.
But there are lots of system calls just doing access_ok() via
"copy_to_user()" and friends (example: fstat() and friends). Those are
generally not problematic because they do not _consume_ data from
userspace other than the pointer. They are also very quick and common
system calls that should not be needlessly slowed down.
"copy_from_user()" on the other hand uses a user-controller pointer and
is frequently followed up with code that might affect caches. Take
something like this:
if (!copy_from_user(&kernelvar, uptr, size))
do_something_with(kernelvar);
If userspace passes in an evil 'uptr' that *actually* points to a kernel
addresses, and then do_something_with() has cache (or other)
side-effects, it could allow userspace to infer kernel data values.
Add a barrier to the common copy_from_user() code to prevent
mis-speculated values which happen after the copy.
Also add a stub for architectures that do not define barrier_nospec().
This makes the macro usable in generic code.
Since the barrier is now usable in generic code, the x86 #ifdef in the
BPF code can also go away.
Reported-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Daniel Borkmann <daniel@iogearbox.net> # BPF bits
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 21 Feb 2023 20:32:05 +0000 (12:32 -0800)]
Merge tag 'thermal-6.3-rc1' of git://git./linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"The majority of changes here are related to the general switch-over to
using arrays of generic trip point structures registered along with a
thermal zone instead of trip point callbacks (this has been done
mostly by Daniel Lezcano with some help from yours truly on the Intel
drivers front).
Apart from that and the related reorganization of code, there are some
enhancements of the existing driver and a new Mediatek Low Voltage
Thermal Sensor (LVTS) driver. The Intel powerclamp undergoes a major
rework so it will use the generic idle_inject facility for CPU idle
time injection going forward and it will take additional module
parameters for specifying the subset of CPUs to be affected by it
(work done by Srinivas Pandruvada).
Also included are assorted fixes and a whole bunch of cleanups.
Specifics:
- Rework a large bunch of drivers to use the generic thermal trip
structure and use the opportunity to do more cleanups by removing
unused functions from the OF code (Daniel Lezcano)
- Remove core header inclusion from drivers (Daniel Lezcano)
- Fix some locking issues related to the generic thermal trip rework
(Johan Hovold)
- Fix a crash when requesting the critical temperature on tegra,
which is related to the generic trip point work (Jon Hunter)
- Clean up thermal device unregistration code (Viresh Kumar)
- Fix and clean up thermal control core initialization error code
paths (Daniel Lezcano)
- Relocate the trip points handling code into a separate file (Daniel
Lezcano)
- Make the thermal core fail registration of thermal zones and
cooling devices if the thermal class has not been registered
(Rafael Wysocki)
- Add trip point initialization helper functions for ACPI-defined
trip points and modify two thermal drivers to use them (Rafael
Wysocki, Daniel Lezcano)
- Make the core thermal control code use sysfs_emit_at() instead of
scnprintf() where applicable (ye xingchen)
- Consolidate code accessing the Intel TCC (Thermal Control
Circuitry) MSRs by introducing library functions for that and
making the TCC-related code in thermal drivers use them (Zhang Rui)
- Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax
changes (Zhang Rui)
- Address an "unsigned expression compared with zero" warning in the
intel_soc_dts_iosf thermal driver (Yang Li)
- Update comments regarding two functions in the Intel Menlow thermal
driver (Deming Wang)
- Use sysfs_emit_at() instead of scnprintf() in the int340x thermal
driver (ye xingchen)
- Make the intel_pch thermal driver support the Wellsburg PCH (Tim
Zimmermann)
- Modify the intel_pch and processor_thermal_device_pci thermal
drivers use generic trip point tables instead of thermal zone trip
point callbacks (Daniel Lezcano)
- Add production mode attribute sysfs attribute to the int340x
thermal driver (Srinivas Pandruvada)
- Rework dynamic trip point updates handling and locking in the
int340x thermal driver (Rafael Wysocki)
- Make the int340x thermal driver use a generic trip points table
instead of thermal zone trip point callbacks (Rafael Wysocki,
Daniel Lezcano)
- Clean up and improve the int340x thermal driver (Rafael Wysocki)
- Simplify and clean up the intel_pch thermal driver (Rafael Wysocki)
- Fix the Intel powerclamp thermal driver and make it use the common
idle injection framework (Srinivas Pandruvada)
- Add two module parameters, cpumask and max_idle, to the Intel
powerclamp thermal driver to allow it to affect only a specific
subset of CPUs instead of all of them (Srinivas Pandruvada)
- Make the Intel quark_dts thermal driver Use generic trip point
objects instead of its own trip point representation (Daniel
Lezcano)
- Add toctree entry for thermal documents and fix two issues in the
Intel powerclamp driver documentation (Bagas Sanjaya)
- Use strscpy() to instead of strncpy() in the thermal core (Xu
Panda)
- Fix thermal_sampling_exit() (Vincent Guittot)
- Add Mediatek Low Voltage Thermal Sensor (LVTS) driver (Balsam
Chihi)
- Add r8a779g0 RCar support to the rcar_gen3 thermal driver (Geert
Uytterhoeven)
- Fix useless call to set_trips() when resuming in the rcar_gen3
thermal control driver and add interrupt support detection at init
time to it (Niklas Söderlund)
- Fix memory corruption in the hi3660 thermal driver (Yongqin Liu)
- Fix include path for libnl3 in pkg-config file for libthermal
(Vibhav Pant)
- Remove syscfg-based driver for st as the platform is not supported
any more (Alain Volmat)"
* tag 'thermal-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (135 commits)
thermal/drivers/st: Remove syscfg based driver
thermal: Remove core header inclusion from drivers
tools/lib/thermal: Fix include path for libnl3 in pkg-config file.
thermal/drivers/hisi: Drop second sensor hi3660
thermal/drivers/rcar_gen3_thermal: Fix device initialization
thermal/drivers/rcar_gen3_thermal: Create device local ops struct
thermal/drivers/rcar_gen3_thermal: Do not call set_trips() when resuming
thermal/drivers/rcar_gen3: Add support for R-Car V4H
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779g0 support
thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver
dt-bindings: thermal: mediatek: Add LVTS thermal controllers
thermal/drivers/mediatek: Relocate driver to mediatek folder
tools/lib/thermal: Fix thermal_sampling_exit()
Documentation: powerclamp: Fix numbered lists formatting
Documentation: powerclamp: Escape wildcard in cpumask description
Documentation: admin-guide: Add toctree entry for thermal docs
thermal: intel: powerclamp: Add two module parameters
Documentation: admin-guide: Move intel_powerclamp documentation
thermal: core: Use sysfs_emit_at() instead of scnprintf()
thermal: intel: powerclamp: Fix duration module parameter
...
Linus Torvalds [Tue, 21 Feb 2023 20:23:24 +0000 (12:23 -0800)]
Merge tag 'acpi-6.3-rc1' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These fix a frequency limit issue in the ACPI processor performance
library code, fix a few issues in the ACPICA code, improve Crystal
Cove support in the ACPI PMIC driver, fix string handling in the ACPI
battery driver, add IRQ override quirks for a few machines more, fix
other assorted problems and clean up code and documentation.
Specifics:
- Drop port I/O validation for some regions to avoid AML failures due
to rejections of legitimate port I/O writes (Mario Limonciello)
- Constify acpi_get_handle() pathname argument to allow its callers
to pass const pathnames to it (Sakari Ailus)
- Prevent acpi_ns_simple_repair() from crashing in some cases when
AE_AML_NO_RETURN_VALUE should be returned (Daniil Tatianin)
- Fix typo in CDAT DSMAS struct definition (Lukas Wunner)
- Drop an unnecessary (void *) conversion from the ACPI processor
driver (Zhou jie)
- Modify the ACPI processor performance library code to use the "no
limit" frequency QoS as appropriate and adjust the intel_pstate
driver accordingly (Rafael Wysocki)
- Add support for NBFT to the ACPI table parser (Stuart Hayes)
- Introduce list of known non-PNP devices to avoid enumerating some
of them as PNP devices (Rafael Wysocki)
- Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow
scripts to report the actual maintainers information (Rafael
Wysocki)
- Add two more entries to the ACPI IRQ override quirk list (Adam
Niederer, Werner Sembach)
- Add a pmic_i2c_address entry for Intel Bay Trail Crystal Cove to
allow intel_soc_pmic_exec_mipi_pmic_seq_element() to be used with
the Bay Trail Crystal Cove PMIC OpRegion driver (Hans de Goede)
- Add comments with DSDT power OpRegion field names to the ACPI PMIC
driver (Hans de Goede)
- Fix string termination handling in the ACPI battery driver (Armin
Wolf)
- Limit error type to 32-bit width in the ACPI APEI error injection
code (Shuai Xue)
- Fix Lenovo Ideapad Z570 DMI match in the ACPI backlight driver
(Hans de Goede)
- Silence missing prototype warnings in some places in the
ACPI-related code (Ammar Faizi)
- Make kobj_type structures used in the ACPI code constant (Thomas
Weißschuh)
- Correct spelling in firmware-guide/ACPI (Randy Dunlap)
- Clarify the meaning of Explicit and Implicit in the _DSD GPIO
properties documentation (Andy Shevchenko)
- Fix some kernel-doc comments in the ACPI CPPC library code (Yang
Li)"
* tag 'acpi-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
ACPI: make kobj_type structures constant
Documentation: firmware-guide: gpio-properties: Clarify Explicit and Implicit
ACPICA: Fix typo in CDAT DSMAS struct definition
ACPI: resource: Do IRQ override on all TongFang GMxRGxx
ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models
ACPI: CPPC: Fix some kernel-doc comments
ACPI: video: Fix Lenovo Ideapad Z570 DMI match
Documentation: firmware-guide/ACPI: correct spelling
ACPI: PMIC: Add comments with DSDT power opregion field names
ACPI: battery: Increase maximum string length
ACPI: battery: Fix buffer overread if not NUL-terminated
ACPI: APEI: EINJ: Limit error type to 32-bit width
MAINTAINERS: Add x86 ACPI paths to the ACPI entry
ACPI: battery: Fix missing NUL-termination with large strings
ACPI: PNP: Introduce list of known non-PNP devices
ACPICA: nsrepair: handle cases without a return value correctly
ACPI: Silence missing prototype warnings
cpufreq: intel_pstate: Drop ACPI _PSS states table patching
ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily
ACPI: processor: perflib: Use the "no limit" frequency QoS
...
Linus Torvalds [Tue, 21 Feb 2023 20:13:58 +0000 (12:13 -0800)]
Merge tag 'pm-6.3-rc1' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add EPP support to the AMD P-state cpufreq driver, add support
for new platforms to the Intel RAPL power capping driver, intel_idle
and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194,
drop the custom cpufreq driver for loongson1 that is not necessary any
more (and the corresponding cpufreq platform device), fix assorted
issues and clean up code.
Specifics:
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
Karny, Arnd Bergmann, Bagas Sanjaya)
- Drop the custom cpufreq driver for loongson1 that is not necessary
any more and the corresponding cpufreq platform device (Keguang
Zhang)
- Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
entries (Paul E. McKenney)
- Enable thermal cooling for Tegra194 (Yi-Wei Wang)
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss)
- Various dt binding updates for qcom-cpufreq-nvmem and
opp-v2-kryo-cpu (Christian Marangi)
- Make kobj_type structure in the cpufreq core constant (Thomas
Weißschuh)
- Make cpufreq_unregister_driver() return void (Uwe Kleine-König)
- Make the TEO cpuidle governor check CPU utilization in order to
refine idle state selection (Kajetan Puchalski)
- Make Kconfig select the haltpoll cpuidle governor when the haltpoll
cpuidle driver is selected and replace a default_idle() call in
that driver with arch_cpu_idle() to allow MWAIT to be used (Li
RongQing)
- Add Emerald Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy)
- Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
avoid randconfig build failures (Arnd Bergmann)
- Make kobj_type structures used in the cpuidle sysfs interface
constant (Thomas Weißschuh)
- Make the cpuidle driver registration code update microsecond values
of idle state parameters in accordance with their nanosecond values
if they are provided (Rafael Wysocki)
- Make the PSCI cpuidle driver prevent topology CPUs from being
suspended on PREEMPT_RT (Krzysztof Kozlowski)
- Document that pm_runtime_force_suspend() cannot be used with
DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald)
- Add EXPORT macros for exporting PM functions from drivers (Richard
Fitzgerald)
- Remove /** from non-kernel-doc comments in hibernation code (Randy
Dunlap)
- Fix possible name leak in powercap_register_zone() (Yang Yingliang)
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui)
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada)
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui)
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman)
- Add missing 'cache-unified' property in the example for kryo OPP
bindings (Rob Herring)
- Fix error checking in opp_migrate_dentry() (Qi Zheng)
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio)
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler)
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap)"
* tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
Documentation: amd-pstate: disambiguate user space sections
cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ
dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
PM: Add EXPORT macros for exporting PM functions
cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT
MIPS: loongson32: Drop obsolete cpufreq platform device
powercap: intel_rapl: Fix handling for large time window
cpuidle: driver: Update microsecond values of state parameters as needed
cpuidle: sysfs: make kobj_type structures constant
cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
PM: EM: fix memory leak with using debugfs_lookup()
PM: domains: fix memory leak with using debugfs_lookup()
cpufreq: Make kobj_type structure constant
cpufreq: davinci: Fix clk use after free
cpufreq: amd-pstate: avoid uninitialized variable use
cpufreq: Make cpufreq_unregister_driver() return void
OPP: fix error checking in opp_migrate_dentry()
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
...
Linus Torvalds [Tue, 21 Feb 2023 19:07:23 +0000 (11:07 -0800)]
Merge tag 'hardening-v6.3-rc1' of git://git./linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"Beyond some specific LoadPin, UBSAN, and fortify features, there are
other fixes scattered around in various subsystems where maintainers
were okay with me carrying them in my tree or were non-responsive but
the patches were reviewed by others:
- Replace 0-length and 1-element arrays with flexible arrays in
various subsystems (Paulo Miguel Almeida, Stephen Rothwell, Kees
Cook)
- randstruct: Disable Clang 15 support (Eric Biggers)
- GCC plugins: Drop -std=gnu++11 flag (Sam James)
- strpbrk(): Refactor to use strchr() (Andy Shevchenko)
- LoadPin LSM: Allow root filesystem switching when non-enforcing
- fortify: Use dynamic object size hints when available
- ext4: Fix CFI function prototype mismatch
- Nouveau: Fix DP buffer size arguments
- hisilicon: Wipe entire crypto DMA pool on error
- coda: Fully allocate sig_inputArgs
- UBSAN: Improve arm64 trap code reporting
- copy_struct_from_user(): Add minimum bounds check on kernel buffer
size"
* tag 'hardening-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randstruct: disable Clang 15 support
uaccess: Add minimum bounds check on kernel buffer size
arm64: Support Clang UBSAN trap codes for better reporting
coda: Avoid partial allocation of sig_inputArgs
gcc-plugins: drop -std=gnu++11 to fix GCC 13 build
lib/string: Use strchr() in strpbrk()
crypto: hisilicon: Wipe entire pool on error
net/i40e: Replace 0-length array with flexible array
io_uring: Replace 0-length array with flexible array
ext4: Fix function prototype mismatch for ext4_feat_ktype
i915/gvt: Replace one-element array with flexible-array member
drm/nouveau/disp: Fix nvif_outp_acquire_dp() argument size
LoadPin: Allow filesystem switch when not enforcing
LoadPin: Move pin reporting cleanly out of locking
LoadPin: Refactor sysctl initialization
LoadPin: Refactor read-only check into a helper
ARM: ixp4xx: Replace 0-length arrays with flexible arrays
fortify: Use __builtin_dynamic_object_size() when available
rxrpc: replace zero-lenth array with DECLARE_FLEX_ARRAY() helper
Linus Torvalds [Tue, 21 Feb 2023 19:04:56 +0000 (11:04 -0800)]
Merge tag 'seccomp-v6.3-rc1' of git://git./linux/kernel/git/kees/linux
Pull seccomp update from Kees Cook:
- Fix kernel-doc function name ordering to avoid warning (Randy Dunlap)
* tag 'seccomp-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: fix kernel-doc function name warning
Linus Torvalds [Tue, 21 Feb 2023 18:45:51 +0000 (10:45 -0800)]
Merge tag 'rcu.2023.02.10a' of git://git./linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates
- Miscellaneous fixes, perhaps most notably:
- Throttling callback invocation based on the number of callbacks
that are now ready to invoke instead of on the total number of
callbacks
- Several patches that suppress false-positive boot-time
diagnostics, for example, due to lockdep not yet being
initialized
- Make expedited RCU CPU stall warnings dump stacks of any tasks
that are blocking the stalled grace period. (Normal RCU CPU
stall warnings have done this for many years)
- Lazy-callback fixes to avoid delays during boot, suspend, and
resume. (Note that lazy callbacks must be explicitly enabled, so
this should not (yet) affect production use cases)
- Make kfree_rcu() and friends take advantage of polled grace periods,
thus reducing memory footprint by almost two orders of magnitude,
admittedly on a microbenchmark
This also begins the transition from kfree_rcu(p) to
kfree_rcu_mightsleep(p). This transition was motivated by bugs where
kfree_rcu(p), which can block, was typed instead of the intended
kfree_rcu(p, rh)
- SRCU updates, perhaps most notably fixing a bug that causes SRCU to
fail when booted on a system with a non-zero boot CPU. This
surprising situation actually happens for kdump kernels on the
powerpc architecture
This also adds an srcu_down_read() and srcu_up_read(), which act like
srcu_read_lock() and srcu_read_unlock(), but allow an SRCU read-side
critical section to be handed off from one task to another
- Clean up the now-useless SRCU Kconfig option
There are a few more commits that are not yet acked or pulled into
maintainer trees, and these will be in a pull request for a later
merge window
- RCU-tasks updates, perhaps most notably these fixes:
- A strange interaction between PID-namespace unshare and the
RCU-tasks grace period that results in a low-probability but
very real hang
- A race between an RCU tasks rude grace period on a single-CPU
system and CPU-hotplug addition of the second CPU that can
result in a too-short grace period
- A race between shrinking RCU tasks down to a single callback
list and queuing a new callback to some other CPU, but where
that queuing is delayed for more than an RCU grace period. This
can result in that callback being stranded on the non-boot CPU
- Torture-test updates and fixes
- Torture-test scripting updates and fixes
- Provide additional RCU CPU stall-warning information in kernels built
with CONFIG_RCU_CPU_STALL_CPUTIME=y, and restore the full five-minute
timeout limit for expedited RCU CPU stall warnings
* tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits)
rcu/kvfree: Add kvfree_rcu_mightsleep() and kfree_rcu_mightsleep()
kernel/notifier: Remove CONFIG_SRCU
init: Remove "select SRCU"
fs/quota: Remove "select SRCU"
fs/notify: Remove "select SRCU"
fs/btrfs: Remove "select SRCU"
fs: Remove CONFIG_SRCU
drivers/pci/controller: Remove "select SRCU"
drivers/net: Remove "select SRCU"
drivers/md: Remove "select SRCU"
drivers/hwtracing/stm: Remove "select SRCU"
drivers/dax: Remove "select SRCU"
drivers/base: Remove CONFIG_SRCU
rcu: Disable laziness if lazy-tracking says so
rcu: Track laziness during boot and suspend
rcu: Remove redundant call to rcu_boost_kthread_setaffinity()
rcu: Allow up to five minutes expedited RCU CPU stall-warning timeouts
rcu: Align the output of RCU CPU stall warning messages
rcu: Add RCU stall diagnosis information
sched: Add helper nr_context_switches_cpu()
...
Linus Torvalds [Tue, 21 Feb 2023 18:36:29 +0000 (10:36 -0800)]
Merge tag 'cgroup-for-6.3' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"All the changes are trivial: documentation updates and a trivial code
cleanup"
* tag 'cgroup-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: fix a few kernel-doc warnings & coding style
docs: cgroup-v1: use numbered lists for user interface setup
docs: cgroup-v1: add internal cross-references
docs: cgroup-v1: make swap extension subsections subsections
docs: cgroup-v1: use bullet lists for list of stat file tables
docs: cgroup-v1: move hierarchy of accounting caption
docs: cgroup-v1: fix footnotes
docs: cgroup-v1: use code block for locking order schema
docs: cgroup-v1: wrap remaining admonitions in admonition blocks
docs: cgroup-v1: replace custom note constructs with appropriate admonition blocks
cgroup/cpuset: no need to explicitly init a global static variable
Linus Torvalds [Tue, 21 Feb 2023 18:25:48 +0000 (10:25 -0800)]
Merge tag 'wq-for-6.3' of git://git./linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
- When per-cpu workqueue workers expire after sitting idle for too
long, they used to wake up to the CPU that they're bound to in order
to exit. This unfortunately could cause unwanted disturbances on CPUs
isolated for e.g. RT applications.
The worker exit path is restructured so that an existing worker is
unbound from its CPU before being woken up for the last time,
allowing it to migrate away from an isolated CPU for exiting.
- A couple debug improvements. Watchdog dump is made more compact and
workqueue now warns if used-after-free during the RCU grace period
after destroy_workqueue().
* tag 'wq-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Fold rebind_worker() within rebind_workers()
workqueue: Unbind kworkers before sending them to exit()
workqueue: Don't hold any lock while rcuwait'ing for !POOL_MANAGER_ACTIVE
workqueue: Convert the idle_timer to a timer + work_struct
workqueue: Factorize unbind/rebind_workers() logic
workqueue: Protects wq_unbound_cpumask with wq_pool_attach_mutex
workqueue: Make show_pwq() use run-length encoding
workqueue: Add a new flag to spot the potential UAF error
Linus Torvalds [Tue, 21 Feb 2023 18:03:48 +0000 (10:03 -0800)]
Merge tag 'irq-core-2023-02-20' of git://git./linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Move the interrupt affinity spreading mechanism into lib/group_cpus
so it can be used for similar spreading requirements, e.g. in the
block multi-queue code
This also contains a first usecase in the block multi-queue code
which Jens asked to take along with the librarization
- Improve irqdomain locking to close a number race conditions which
can be observed with massive parallel device driver probing
- Enforce and document the semantics of disable_irq() which cannot be
invoked safely from non-sleepable context
- Move the IPI multiplexing code from the Apple AIC driver into the
core, so it can be reused by RISCV
Drivers:
- Plug OF node refcounting leaks in various drivers
- Correctly mark level triggered interrupts in the Broadcom L2
drivers
- The usual small fixes and improvements
- No new drivers for the record!"
* tag 'irq-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts
irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts
irqdomain: Switch to per-domain locking
irqchip/mvebu-odmi: Use irq_domain_create_hierarchy()
irqchip/loongson-pch-msi: Use irq_domain_create_hierarchy()
irqchip/gic-v3-mbi: Use irq_domain_create_hierarchy()
irqchip/gic-v3-its: Use irq_domain_create_hierarchy()
irqchip/gic-v2m: Use irq_domain_create_hierarchy()
irqchip/alpine-msi: Use irq_domain_add_hierarchy()
x86/uv: Use irq_domain_create_hierarchy()
x86/ioapic: Use irq_domain_create_hierarchy()
irqdomain: Clean up irq_domain_push/pop_irq()
irqdomain: Drop leftover brackets
irqdomain: Drop dead domain-name assignment
irqdomain: Drop revmap mutex
irqdomain: Fix domain registration race
irqdomain: Fix mapping-creation race
irqdomain: Refactor __irq_domain_alloc_irqs()
irqdomain: Look for existing mapping only once
irqdomain: Drop bogus fwspec-mapping error handling
...
Linus Torvalds [Tue, 21 Feb 2023 17:45:13 +0000 (09:45 -0800)]
Merge tag 'timers-core-2023-02-20' of git://git./linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timekeeping, timers and clockevent/source drivers:
Core:
- Yet another round of improvements to make the clocksource watchdog
more robust:
- Relax the clocksource-watchdog skew criteria to match the NTP
criteria.
- Temporarily skip the watchdog when high memory latencies are
detected which can lead to false-positives.
- Provide an option to enable TSC skew detection even on systems
where TSC is marked as reliable.
Sigh!
- Initialize the restart block in the nanosleep syscalls to be
directed to the no restart function instead of doing a partial
setup on entry.
This prevents an erroneous restart_syscall() invocation from
corrupting user space data. While such a situation is clearly a
user space bug, preventing this is a correctness issue and caters
to the least suprise principle.
- Ignore the hrtimer slack for realtime tasks in schedule_hrtimeout()
to align it with the nanosleep semantics.
Drivers:
- The obligatory new driver bindings for Mediatek, Rockchip and
RISC-V variants.
- Add support for the C3STOP misfeature to the RISC-V timer to handle
the case where the timer stops in deeper idle state.
- Set up a static key in the RISC-V timer correctly before first use.
- The usual small improvements and fixes all over the place"
* tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
clocksource/drivers/timer-sun4i: Add CLOCK_EVT_FEAT_DYNIRQ
clocksource/drivers/em_sti: Mark driver as non-removable
clocksource/drivers/sh_tmu: Mark driver as non-removable
clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use
clocksource/drivers/timer-microchip-pit64b: Add delay timer
clocksource/drivers/timer-microchip-pit64b: Select driver only on ARM
dt-bindings: timer: sifive,clint: add comaptibles for T-Head's C9xx
dt-bindings: timer: mediatek,mtk-timer: add MT8365
clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback
clocksource/drivers/sh_cmt: Mark driver as non-removable
clocksource/drivers/timer-microchip-pit64b: Drop obsolete dependency on COMPILE_TEST
clocksource/drivers/riscv: Increase the clock source rating
clocksource/drivers/timer-riscv: Set CLOCK_EVT_FEAT_C3STOP based on DT
dt-bindings: timer: Add bindings for the RISC-V timer device
RISC-V: time: initialize hrtimer based broadcast clock event device
dt-bindings: timer: rk-timer: Add rktimer for rv1126
time/debug: Fix memory leak with using debugfs_lookup()
clocksource: Enable TSC watchdog checking of HPET and PMTMR only when requested
posix-timers: Use atomic64_try_cmpxchg() in __update_gt_cputime()
clocksource: Verify HPET and PMTMR when TSC unverified
...
Jakub Kicinski [Tue, 21 Feb 2023 17:26:22 +0000 (09:26 -0800)]
Merge git://git./linux/kernel/git/netdev/net
Per-next-PR merge.
net/smc/af_smc.c
b5dd4d698171 ("net/smc: llc_conf_mutex refactor, replace it with rw_semaphore")
e40b801b3603 ("net/smc: fix potential panic dues to unprotected smc_llc_srv_add_link()")
https://lore.kernel.org/all/
20230221124008.
6303c330@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Tue, 21 Feb 2023 17:24:08 +0000 (09:24 -0800)]
Merge tag 'x86-cleanups-2023-02-20' of git://git./linux/kernel/git/tip/tip
Pull miscellaneous x86 cleanups from Thomas Gleixner:
- Correct the common copy and pasted mishandling of kstrtobool() in the
strict_sas_size() setup function
- Make recalibrate_cpu_khz() an GPL only export
- Check TSC feature before doing anything else which avoids pointless
code execution if TSC is not available
- Remove or fixup stale and misleading comments
- Remove unused or pointelessly duplicated variables
- Spelling and typo fixes
* tag 'x86-cleanups-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hotplug: Remove incorrect comment about mwait_play_dead()
x86/tsc: Do feature check as the very first thing
x86/tsc: Make recalibrate_cpu_khz() export GPL only
x86/cacheinfo: Remove unused trace variable
x86/Kconfig: Fix spellos & punctuation
x86/signal: Fix the value returned by strict_sas_size()
x86/cpu: Remove misleading comment
x86/setup: Move duplicate boot_cpu_data definition out of the ifdeffery
x86/boot/e820: Fix typo in e820.c comment
Ilias Apalodimas [Fri, 17 Feb 2023 22:21:30 +0000 (00:21 +0200)]
page_pool: add a comment explaining the fragment counter usage
When reading the page_pool code the first impression is that keeping
two separate counters, one being the page refcnt and the other being
fragment pp_frag_count, is counter-intuitive.
However without that fragment counter we don't know when to reliably
destroy or sync the outstanding DMA mappings. So let's add a comment
explaining this part.
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/20230217222130.85205-1-ilias.apalodimas@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 20 Feb 2023 12:23:31 +0000 (14:23 +0200)]
net: ethtool: fix __ethtool_dev_mm_supported() implementation
The MAC Merge layer is supported when ops->get_mm() returns 0.
The implementation was changed during review, and in this process, a bug
was introduced.
Link: https://lore.kernel.org/netdev/20230111161706.1465242-5-vladimir.oltean@nxp.com/
Fixes:
04692c9020b7 ("net: ethtool: netlink: retrieve stats from multiple sources (eMAC, pMAC)")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Link: https://lore.kernel.org/all/20230220122343.1156614-2-vladimir.oltean@nxp.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bo Liu [Tue, 21 Feb 2023 08:30:36 +0000 (03:30 -0500)]
ethtool: pse-pd: Fix double word in comments
Remove the repeated word "for" in comments.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20230221083036.2414-1-liubo03@inspur.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xuan Zhuo [Tue, 21 Feb 2023 07:51:40 +0000 (15:51 +0800)]
xsk: add linux/vmalloc.h to xsk.c
Fix the failure of the compilation under the sh4.
Because we introduced remap_vmalloc_range() earlier, this has caused
the compilation failure on the sh4 platform. So this introduction of the
header file of linux/vmalloc.h.
config: sh-allmodconfig (https://download.01.org/0day-ci/archive/
20230221/
202302210041.kpPQLlNQ-lkp@intel.com/config)
compiler: sh4-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git/commit/?id=
9f78bf330a66cd400b3e00f370f597e9fa939207
git remote add net-next https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
git fetch --no-tags net-next master
git checkout
9f78bf330a66cd400b3e00f370f597e9fa939207
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=sh olddefconfig
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=sh SHELL=/bin/bash net/
Fixes:
9f78bf330a66 ("xsk: support use vaddr as ring")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202302210041.kpPQLlNQ-lkp@intel.com/
Link: https://lore.kernel.org/r/20230221075140.46988-1-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Tue, 21 Feb 2023 16:54:41 +0000 (08:54 -0800)]
Merge tag 'x86_vdso_for_v6.3_rc1' of git://git./linux/kernel/git/tip/tip
Pull x86 vdso updates from Borislav Petkov:
- Add getcpu support for the 32-bit version of the vDSO
- Some smaller fixes
* tag 'x86_vdso_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Fix -Wmissing-prototypes warnings
x86/vdso: Fake 32bit VDSO build on 64bit compile for vgetcpu
selftests: Emit a warning if getcpu() is missing on 32bit
x86/vdso: Provide getcpu for x86-32.
x86/cpu: Provide the full setup for getcpu() on x86-32
x86/vdso: Move VDSO image init to vdso2c generated code
Linus Torvalds [Tue, 21 Feb 2023 16:47:36 +0000 (08:47 -0800)]
Merge tag 'x86_microcode_for_v6.3_rc1' of git://git./linux/kernel/git/tip/tip
Pull x86 microcode loader updates from Borislav Petkov:
- Fix mixed steppings support on AMD which got broken somewhere along
the way
- Improve revision reporting
- Properly check CPUID capabilities after late microcode upgrade to
avoid false positives
- A garden variety of other small fixes
* tag 'x86_microcode_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/core: Return an error only when necessary
x86/microcode/AMD: Fix mixed steppings support
x86/microcode/AMD: Add a @cpu parameter to the reloading functions
x86/microcode/amd: Remove load_microcode_amd()'s bsp parameter
x86/microcode: Allow only "1" as a late reload trigger value
x86/microcode/intel: Print old and new revision during early boot
x86/microcode/intel: Pass the microcode revision to print_ucode_info() directly
x86/microcode: Adjust late loading result reporting message
x86/microcode: Check CPU capabilities after late microcode update correctly
x86/microcode: Add a parameter to microcode_check() to store CPU capabilities
x86/microcode: Use the DEVICE_ATTR_RO() macro
x86/microcode/AMD: Handle multiple glued containers properly
x86/microcode/AMD: Rename a couple of functions
Linus Torvalds [Tue, 21 Feb 2023 16:38:45 +0000 (08:38 -0800)]
Merge tag 'x86_cache_for_v6.3_rc1' of git://git./linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Add support for a new AMD feature called slow memory bandwidth
allocation. Its goal is to control resource allocation in external
slow memory which is connected to the machine like for example
through CXL devices, accelerators etc
* tag 'x86_cache_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Fix a silly -Wunused-but-set-variable warning
Documentation/x86: Update resctrl.rst for new features
x86/resctrl: Add interface to write mbm_local_bytes_config
x86/resctrl: Add interface to write mbm_total_bytes_config
x86/resctrl: Add interface to read mbm_local_bytes_config
x86/resctrl: Add interface to read mbm_total_bytes_config
x86/resctrl: Support monitor configuration
x86/resctrl: Add __init attribute to rdt_get_mon_l3_config()
x86/resctrl: Detect and configure Slow Memory Bandwidth Allocation
x86/resctrl: Include new features in command line options
x86/cpufeatures: Add Bandwidth Monitoring Event Configuration feature flag
x86/resctrl: Add a new resource type RDT_RESOURCE_SMBA
x86/cpufeatures: Add Slow Memory Bandwidth Allocation feature flag
x86/resctrl: Replace smp_call_function_many() with on_each_cpu_mask()
Linus Torvalds [Tue, 21 Feb 2023 16:27:47 +0000 (08:27 -0800)]
Merge tag 'x86_alternatives_for_v6.3_rc1' of git://git./linux/kernel/git/tip/tip
Pull x86 asm alternatives updates from Borislav Petkov:
- Teach the static_call patching infrastructure to handle conditional
tall calls properly which can be static calls too
- Add proper struct alt_instr.flags which controls different aspects of
insn patching behavior
* tag 'x86_alternatives_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/static_call: Add support for Jcc tail-calls
x86/alternatives: Teach text_poke_bp() to patch Jcc.d32 instructions
x86/alternatives: Introduce int3_emulate_jcc()
x86/alternatives: Add alt_instr.flags
Linus Torvalds [Tue, 21 Feb 2023 16:10:03 +0000 (08:10 -0800)]
Merge tag 'edac_updates_for_v6.3' of git://git./linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add a driver for the RAS functionality on Xilinx's on chip memory
controller
- Add support for decoding errors from the first and second level
memory on SKL-based hardware
- Add support for the memory controllers in Intel Granite Rapids and
Emerald Rapids machines
- First round of amd64_edac driver simplification and removal of
unneeded functionality
- The usual cleanups and fixes
* tag 'edac_updates_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Shut up an -Werror,-Wsometimes-uninitialized clang false positive
EDAC/amd64: Remove early_channel_count()
EDAC/amd64: Remove PCI Function 0
EDAC/amd64: Remove PCI Function 6
EDAC/amd64: Remove scrub rate control for Family 17h and later
EDAC/amd64: Don't set up EDAC PCI control on Family 17h+
EDAC/i10nm: Add driver decoder for Sapphire Rapids server
EDAC/i10nm: Add Intel Granite Rapids server support
EDAC/i10nm: Make more configurations CPU model specific
EDAC/i10nm: Add Intel Emerald Rapids server support
EDAC/skx_common: Delete duplicated and unreachable code
EDAC/skx_common: Enable EDAC support for the "near" memory
EDAC/qcom: Add platform_device_id table for module autoloading
EDAC/zynqmp: Add EDAC support for Xilinx ZynqMP OCM
dt-bindings: edac: Add bindings for Xilinx ZynqMP OCM
Linus Torvalds [Tue, 21 Feb 2023 16:04:51 +0000 (08:04 -0800)]
Merge tag 'ras_core_for_v6.3_rc1' of git://git./linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Add support for reporting more bits of the physical address on error,
on newer AMD CPUs
- Mask out bits which don't belong to the address of the error being
reported
* tag 'ras_core_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Mask out non-address bits from machine check bank
x86/mce: Add support for Extended Physical Address MCA changes
x86/mce: Define a function to extract ErrorAddr from MCA_ADDR
Jiri Pirko [Mon, 20 Feb 2023 13:23:36 +0000 (14:23 +0100)]
sefltests: netdevsim: wait for devlink instance after netns removal
When devlink instance is put into network namespace and that network
namespace gets deleted, devlink instance is moved back into init_ns.
This is done as a part of cleanup_net() routine. Since cleanup_net()
is called asynchronously from workqueue, there is no guarantee that
the devlink instance move is done after "ip netns del" returns.
So fix this race by making sure that the devlink instance is present
before any other operation.
Reported-by: Amir Tzin <amirtz@nvidia.com>
Fixes:
b74c37fd35a2 ("selftests: netdevsim: add tests for devlink reload with resources")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230220132336.198597-1-jiri@resnulli.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Roxana Nicolescu [Mon, 20 Feb 2023 11:04:00 +0000 (12:04 +0100)]
selftest: fib_tests: Always cleanup before exit
Usage of `set -e` before executing a command causes immediate exit
on failure, without cleanup up the resources allocated at setup.
This can affect the next tests that use the same resources,
leading to a chain of failures.
A simple fix is to always call cleanup function when the script exists.
This approach is already used by other existing tests.
Fixes:
1056691b2680 ("selftests: fib_tests: Make test results more verbose")
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Link: https://lore.kernel.org/r/20230220110400.26737-2-roxana.nicolescu@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Linus Torvalds [Tue, 21 Feb 2023 03:04:54 +0000 (19:04 -0800)]
Merge tag 'x86-platform-2023-02-20' of git://git./linux/kernel/git/tip/tip
Pull x86 platform update from Ingo Molnar:
- Simplify add_rtc_cmos()
- Use strscpy() in the mcelog code
* tag 'x86-platform-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce/dev-mcelog: use strscpy() to instead of strncpy()
x86/rtc: Simplify PNP ids check
Linus Torvalds [Tue, 21 Feb 2023 03:00:00 +0000 (19:00 -0800)]
Merge tag 'x86-mm-2023-02-20' of git://git./linux/kernel/git/tip/tip
Pull x86 mm update from Ingo Molnar:
"Micro-optimize __flush_tlb_all()"
* tag 'x86-mm-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Use cpu_feature_enabled() when checking global pages support
Linus Torvalds [Tue, 21 Feb 2023 02:50:02 +0000 (18:50 -0800)]
Merge tag 'x86-fpu-2023-02-20' of git://git./linux/kernel/git/tip/tip
Pull x86 fpu updates from Ingo Molnar:
- Replace zero-length array in struct xregs_state with flexible-array
member, to help the enabling of stricter compiler checks.
- Don't set TIF_NEED_FPU_LOAD for PF_IO_WORKER threads.
* tag 'x86-fpu-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Don't set TIF_NEED_FPU_LOAD for PF_IO_WORKER threads
x86/fpu: Replace zero-length array in struct xregs_state with flexible-array member
Linus Torvalds [Tue, 21 Feb 2023 02:40:45 +0000 (18:40 -0800)]
Merge tag 'x86-core-2023-02-20' of git://git./linux/kernel/git/tip/tip
Pull x86 core updates from Ingo Molnar:
- Clean up the signal frame layout tests
- Suppress KMSAN false positive reports in arch_within_stack_frames()
* tag 'x86-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Suppress KMSAN reports in arch_within_stack_frames()
x86/signal/compat: Move sigaction_compat_abi() to signal_64.c
x86/signal: Move siginfo field tests
Linus Torvalds [Tue, 21 Feb 2023 02:36:54 +0000 (18:36 -0800)]
Merge tag 'x86-build-2023-02-20' of git://git./linux/kernel/git/tip/tip
Pull x86 build update from Ingo Molnar:
"Make the 64-bit defconfig the x86 default for all builds, unless
x86-32 is requested explicitly"
* tag 'x86-build-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Make 64-bit defconfig the default
Linus Torvalds [Tue, 21 Feb 2023 02:32:55 +0000 (18:32 -0800)]
Merge tag 'x86-boot-2023-02-20' of git://git./linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- Robustify/fix calling startup_{32,64}() from the decompressor code,
and removing x86 quirk from scripts/head-object-list.txt as a result.
- Do not register processors that cannot be onlined for x2APIC
* tag 'x86-boot-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC
scripts/head-object-list: Remove x86 from the list
x86/boot: Robustify calling startup_{32,64}() from the decompressor code
Linus Torvalds [Tue, 21 Feb 2023 02:25:30 +0000 (18:25 -0800)]
Merge tag 'x86-asm-2023-02-20' of git://git./linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
"Header fixes and a DocBook fix"
* tag 'x86-asm-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/lib: Fix compiler and kernel-doc warnings
x86/lib: Include <asm/misc.h> to fix a missing prototypes warning at build time
Linus Torvalds [Tue, 21 Feb 2023 01:41:08 +0000 (17:41 -0800)]
Merge tag 'sched-core-2023-02-20' of git://git./linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve the scalability of the CFS bandwidth unthrottling logic with
large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with the
generic scheduler code. Add __cpuidle methods as noinstr to objtool's
noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period, to
improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- Misc other cleanups, fixes
* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
sched/rt: pick_next_rt_entity(): check list_entry
sched/deadline: Add more reschedule cases to prio_changed_dl()
sched/fair: sanitize vruntime of entity being placed
sched/fair: Remove capacity inversion detection
sched/fair: unlink misfit task from cpu overutilized
objtool: mem*() are not uaccess safe
cpuidle: Fix poll_idle() noinstr annotation
sched/clock: Make local_clock() noinstr
sched/clock/x86: Mark sched_clock() noinstr
x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
x86/atomics: Always inline arch_atomic64*()
cpuidle: tracing, preempt: Squash _rcuidle tracing
cpuidle: tracing: Warn about !rcu_is_watching()
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
cpuidle: drivers: firmware: psci: Dont instrument suspend code
KVM: selftests: Fix build of rseq test
exit: Detect and fix irq disabled state in oops
cpuidle, arm64: Fix the ARM64 cpuidle logic
cpuidle: mvebu: Fix duplicate flags assignment
sched/fair: Limit sched slice duration
...
Linus Torvalds [Tue, 21 Feb 2023 01:29:55 +0000 (17:29 -0800)]
Merge tag 'perf-core-2023-02-20' of git://git./linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
- Optimize perf_sample_data layout
- Prepare sample data handling for BPF integration
- Update the x86 PMU driver for Intel Meteor Lake
- Restructure the x86 uncore code to fix a SPR (Sapphire Rapids)
discovery breakage
- Fix the x86 Zhaoxin PMU driver
- Cleanups
* tag 'perf-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
perf/x86/intel/uncore: Add Meteor Lake support
x86/perf/zhaoxin: Add stepping check for ZXC
perf/x86/intel/ds: Fix the conversion from TSC to perf time
perf/x86/uncore: Don't WARN_ON_ONCE() for a broken discovery table
perf/x86/uncore: Add a quirk for UPI on SPR
perf/x86/uncore: Ignore broken units in discovery table
perf/x86/uncore: Fix potential NULL pointer in uncore_get_alias_name
perf/x86/uncore: Factor out uncore_device_to_die()
perf/core: Call perf_prepare_sample() before running BPF
perf/core: Introduce perf_prepare_header()
perf/core: Do not pass header for sample ID init
perf/core: Set data->sample_flags in perf_prepare_sample()
perf/core: Add perf_sample_save_brstack() helper
perf/core: Add perf_sample_save_raw_data() helper
perf/core: Add perf_sample_save_callchain() helper
perf/core: Save the dynamic parts of sample data size
x86/kprobes: Use switch-case for 0xFF opcodes in prepare_emulation
perf/core: Change the layout of perf_sample_data
perf/x86/msr: Add Meteor Lake support
perf/x86/cstate: Add Meteor Lake support
...
Linus Torvalds [Tue, 21 Feb 2023 01:18:23 +0000 (17:18 -0800)]
Merge tag 'locking-core-2023-02-20' of git://git./linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- rwsem micro-optimizations
- spinlock micro-optimizations
- cleanups, simplifications
* tag 'locking-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vduse: Remove include of rwlock.h
locking/lockdep: Remove lockdep_init_map_crosslock.
x86/ACPI/boot: Use try_cmpxchg() in __acpi_{acquire,release}_global_lock()
x86/PAT: Use try_cmpxchg() in set_page_memtype()
locking/rwsem: Disable preemption in all down_write*() and up_write() code paths
locking/rwsem: Disable preemption in all down_read*() and up_read() code paths
locking/rwsem: Prevent non-first waiter from spinning in down_write() slowpath
locking/qspinlock: Micro-optimize pending state waiting for unlock
Leon Romanovsky [Sun, 19 Feb 2023 09:09:10 +0000 (11:09 +0200)]
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
Hardware requires an alignment to 64 bytes to return ASO data. Missing
this alignment caused to unpredictable results while ASO events were
generated.
Fixes:
8518d05b8f9a ("net/mlx5e: Create Advanced Steering Operation object for IPsec")
Reported-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/de0302c572b90c9224a72868d4e0d657b6313c4b.1676797613.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 21 Feb 2023 00:52:50 +0000 (16:52 -0800)]
Merge tag 'mlx5-updates-2023-02-15' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-02-15
1) From Gal Tariq and Parav, Few cleanups for mlx5 driver.
2) From Vlad: Allow offloading of ct 'new' match based on [1]
[1] https://lore.kernel.org/netdev/
20230201163100.1001180-1-vladbu@nvidia.com/
* tag 'mlx5-updates-2023-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: RX, Remove doubtful unlikely call
net/mlx5e: Fix outdated TLS comment
net/mlx5e: Remove unused function mlx5e_sq_xmit_simple
net/mlx5e: Allow offloading of ct 'new' match
net/mlx5e: Implement CT entry update
net/mlx5: Simplify eq list traversal
net/mlx5e: Remove redundant page argument in mlx5e_xdp_handle()
net/mlx5e: Remove redundant page argument in mlx5e_xmit_xdp_buff()
net/mlx5e: Switch to using napi_build_skb()
====================
Link: https://lore.kernel.org/r/20230218090513.284718-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 21 Feb 2023 00:46:11 +0000 (16:46 -0800)]
Merge branch 'net-sched-cls_api-support-hardware-miss-to-tc-action'
Paul Blakey says:
====================
net/sched: cls_api: Support hardware miss to tc action
This series adds support for hardware miss to instruct tc to continue execution
in a specific tc action instance on a filter's action list. The mlx5 driver patch
(besides the refactors) shows its usage instead of using just chain restore.
Currently a filter's action list must be executed all together or
not at all as driver are only able to tell tc to continue executing from a
specific tc chain, and not a specific filter/action.
This is troublesome with regards to action CT, where new connections should
be sent to software (via tc chain restore), and established connections can
be handled in hardware.
Checking for new connections is done when executing the ct action in hardware
(by checking the packet's tuple against known established tuples).
But if there is a packet modification (pedit) action before action CT and the
checked tuple is a new connection, hardware will need to revert the previous
packet modifications before sending it back to software so it can
re-match the same tc filter in software and re-execute its CT action.
The following is an example configuration of stateless nat
on mlx5 driver that isn't supported before this patchet:
#Setup corrosponding mlx5 VFs in namespaces
$ ip netns add ns0
$ ip netns add ns1
$ ip link set dev enp8s0f0v0 netns ns0
$ ip netns exec ns0 ifconfig enp8s0f0v0 1.1.1.1/24 up
$ ip link set dev enp8s0f0v1 netns ns1
$ ip netns exec ns1 ifconfig enp8s0f0v1 1.1.1.2/24 up
#Setup tc arp and ct rules on mxl5 VF representors
$ tc qdisc add dev enp8s0f0_0 ingress
$ tc qdisc add dev enp8s0f0_1 ingress
$ ifconfig enp8s0f0_0 up
$ ifconfig enp8s0f0_1 up
#Original side
$ tc filter add dev enp8s0f0_0 ingress chain 0 proto ip flower \
ct_state -trk ip_proto tcp dst_port 8888 \
action pedit ex munge tcp dport set 5001 pipe \
action csum ip tcp pipe \
action ct pipe \
action goto chain 1
$ tc filter add dev enp8s0f0_0 ingress chain 1 proto ip flower \
ct_state +trk+est \
action mirred egress redirect dev enp8s0f0_1
$ tc filter add dev enp8s0f0_0 ingress chain 1 proto ip flower \
ct_state +trk+new \
action ct commit pipe \
action mirred egress redirect dev enp8s0f0_1
$ tc filter add dev enp8s0f0_0 ingress chain 0 proto arp flower \
action mirred egress redirect dev enp8s0f0_1
#Reply side
$ tc filter add dev enp8s0f0_1 ingress chain 0 proto arp flower \
action mirred egress redirect dev enp8s0f0_0
$ tc filter add dev enp8s0f0_1 ingress chain 0 proto ip flower \
ct_state -trk ip_proto tcp \
action ct pipe \
action pedit ex munge tcp sport set 8888 pipe \
action csum ip tcp pipe \
action mirred egress redirect dev enp8s0f0_0
#Run traffic
$ ip netns exec ns1 iperf -s -p 5001&
$ sleep 2 #wait for iperf to fully open
$ ip netns exec ns0 iperf -c 1.1.1.2 -p 8888
#dump tc filter stats on enp8s0f0_0 chain 0 rule and see hardware packets:
$ tc -s filter show dev enp8s0f0_0 ingress chain 0 proto ip | grep "hardware.*pkt"
Sent hardware
9310116832 bytes 6149672 pkt
Sent hardware
9310116832 bytes 6149672 pkt
Sent hardware
9310116832 bytes 6149672 pkt
A new connection executing the first filter in hardware will first rewrite
the dst port to the new port, and then the ct action is executed,
because this is a new connection, hardware will need to be send this back
to software, on chain 0, to execute the first filter again in software.
The dst port needs to be reverted otherwise it won't re-match the old
dst port in the first filter. Because of that, currently mlx5 driver will
reject offloading the above action ct rule.
This series adds support for hardware partially executing a filter's action list,
and letting tc software continue processing in the specific action instance
where hardware left off (in the above case after the "action pedit ex munge tcp
dport... of the first rule") allowing support for scenarios such as the above.
====================
Link: https://lore.kernel.org/r/20230217223620.28508-1-paulb@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paul Blakey [Fri, 17 Feb 2023 22:36:20 +0000 (00:36 +0200)]
net/mlx5e: TC, Set CT miss to the specific ct action instance
Currently, CT misses restore the missed chain on the tc skb extension so
tc will continue from the relevant chain. Instead, restore the CT action's
miss cookie on the extension, which will instruct tc to continue from the
this specific CT action instance on the relevant filter's action list.
Map the CT action's miss_cookie to a new miss object (ACT_MISS), and use
this miss mapping instead of the current chain miss object (CHAIN_MISS)
for CT action misses.
To restore this new miss mapping value, add a RX restore rule for each
such mapping value.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Sholmo <ozsh@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paul Blakey [Fri, 17 Feb 2023 22:36:19 +0000 (00:36 +0200)]
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
This reg usage is always a mapped object, not necessarily
containing chain info.
Rename to properly convey what it stores.
This patch doesn't change any functionality.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paul Blakey [Fri, 17 Feb 2023 22:36:18 +0000 (00:36 +0200)]
net/mlx5: Refactor tc miss handling to a single function
Move tc miss handling code to en_tc.c, and remove
duplicate code.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paul Blakey [Fri, 17 Feb 2023 22:36:17 +0000 (00:36 +0200)]
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
Tc skb extension is a basic requirement for using tc
offload to support correct restoration on action miss.
Depend on it.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paul Blakey [Fri, 17 Feb 2023 22:36:16 +0000 (00:36 +0200)]
net/sched: flower: Support hardware miss to tc action
To support hardware miss to tc action in actions on the flower
classifier, implement the required getting of filter actions,
and setup filter exts (actions) miss by giving it the filter's
handle and actions.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paul Blakey [Fri, 17 Feb 2023 22:36:15 +0000 (00:36 +0200)]
net/sched: flower: Move filter handle initialization earlier
To support miss to action during hardware offload the filter's
handle is needed when setting up the actions (tcf_exts_init()),
and before offloading.
Move filter handle initialization earlier.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paul Blakey [Fri, 17 Feb 2023 22:36:14 +0000 (00:36 +0200)]
net/sched: cls_api: Support hardware miss to tc action
For drivers to support partial offload of a filter's action list,
add support for action miss to specify an action instance to
continue from in sw.
CT action in particular can't be fully offloaded, as new connections
need to be handled in software. This imposes other limitations on
the actions that can be offloaded together with the CT action, such
as packet modifications.
Assign each action on a filter's action list a unique miss_cookie
which drivers can then use to fill action_miss part of the tc skb
extension. On getting back this miss_cookie, find the action
instance with relevant cookie and continue classifying from there.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paul Blakey [Fri, 17 Feb 2023 22:36:13 +0000 (00:36 +0200)]
net/sched: Rename user cookie and act cookie
struct tc_action->act_cookie is a user defined cookie,
and the related struct flow_action_entry->act_cookie is
used as an handle similar to struct flow_cls_offload->cookie.
Rename tc_action->act_cookie to user_cookie, and
flow_action_entry->act_cookie to cookie so their names
would better fit their usage.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 21 Feb 2023 00:40:52 +0000 (16:40 -0800)]
Merge tag 'ieee802154-for-net-next-2023-02-20' of git://git./linux/kernel/git/sschmidt/wpan-next
Stefan Schmidt says:
====================
pull-request: ieee802154-next 2023-02-20
Miquel Raynal build upon his earlier work and introduced two new
features into the ieee802154 stack. Beaconing to announce existing
PAN's and passive scanning to discover the beacons and associated
PAN's. The matching changes to the userspace configuration tool
have been posted as well and will be released together with the
kernel release.
Arnd Bergmann and Dmitry Torokhov worked on converting the
at86rf230 and cc2520 drivers away from the unused platform_data
usage and towards the new gpiod API. (I had to add a revert as
Dmitry found a regression on an already pushed tree on my side).
Changes since v1 (pull request 2023-02-02)
- Netlink API extack and NLA_POLICY* usage as suggested by Jakub
- Removed always true condition found by kernel test robot
- Simplify device removal with running background job for scanning
- Fix problems with beacon sending in some cases by using the MLME
tx path
* tag 'ieee802154-for-net-next-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next:
ieee802154: Drop device trackers
mac802154: Fix an always true condition
mac802154: Send beacons using the MLME Tx path
ieee802154: Change error code on monitor scan netlink request
ieee802154: Convert scan error messages to extack
ieee802154: Use netlink policies when relevant on scan parameters
ieee802154: at86rf230: switch to using gpiod API
ieee802154: at86rf230: drop support for platform data
Revert "at86rf230: convert to gpio descriptors"
cc2520: move to gpio descriptors
mac802154: Avoid superfluous endianness handling
at86rf230: convert to gpio descriptors
mac802154: Handle basic beaconing
ieee802154: Add support for user beaconing requests
mac802154: Handle passive scanning
mac802154: Add MLME Tx locked helpers
mac802154: Prepare forcing specific symbol duration
ieee802154: Introduce a helper to validate a channel
ieee802154: Define a beacon frame header
ieee802154: Add support for user scanning requests
====================
Link: https://lore.kernel.org/r/20230220213749.386451-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alejandro Lucero [Mon, 20 Feb 2023 11:01:33 +0000 (11:01 +0000)]
sfc: fix builds without CONFIG_RTC_LIB
Add an embarrassingly missed semicolon plus and embarrassingly missed
parenthesis breaking kernel building when CONFIG_RTC_LIB is not set
like the one reported with ia64 config.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202302170047.EjCPizu3-lkp@intel.com/
Fixes:
14743ddd2495 ("sfc: add devlink info support for ef100")
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Link: https://lore.kernel.org/r/20230220110133.29645-1-alejandro.lucero-palau@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yang Li [Mon, 20 Feb 2023 06:59:58 +0000 (14:59 +0800)]
sfc: clean up some inconsistent indentings
Fix some indentngs and remove the warning below:
drivers/net/ethernet/sfc/mae.c:657 efx_mae_enumerate_mports() warn: inconsistent indenting
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4117
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230220065958.52941-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kees Cook [Sat, 18 Feb 2023 18:38:50 +0000 (10:38 -0800)]
net/mlx4_en: Introduce flexible array to silence overflow warning
The call "skb_copy_from_linear_data(skb, inl + 1, spc)" triggers a FORTIFY
memcpy() warning on ppc64 platform:
In function ‘fortify_memcpy_chk’,
inlined from ‘skb_copy_from_linear_data’ at ./include/linux/skbuff.h:4029:2,
inlined from ‘build_inline_wqe’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:722:4,
inlined from ‘mlx4_en_xmit’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:1066:3:
./include/linux/fortify-string.h:513:25: error: call to ‘__write_overflow_field’ declared with
attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()?
[-Werror=attribute-warning]
513 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Same behaviour on x86 you can get if you use "__always_inline" instead of
"inline" for skb_copy_from_linear_data() in skbuff.h
The call here copies data into inlined tx destricptor, which has 104
bytes (MAX_INLINE) space for data payload. In this case "spc" is known
in compile-time but the destination is used with hidden knowledge
(real structure of destination is different from that the compiler
can see). That cause the fortify warning because compiler can check
bounds, but the real bounds are different. "spc" can't be bigger than
64 bytes (MLX4_INLINE_ALIGN), so the data can always fit into inlined
tx descriptor. The fact that "inl" points into inlined tx descriptor is
determined earlier in mlx4_en_xmit().
Avoid confusing the compiler with "inl + 1" constructions to get to past
the inl header by introducing a flexible array "data" to the struct so
that the compiler can see that we are not dealing with an array of inl
structs, but rather, arbitrary data following the structure. There are
no changes to the structure layout reported by pahole, and the resulting
machine code is actually smaller.
Reported-by: Josef Oskera <joskera@redhat.com>
Link: https://lore.kernel.org/lkml/20230217094541.2362873-1-joskera@redhat.com
Fixes:
f68f2ff91512 ("fortify: Detect struct member overflows in memcpy() at compile-time")
Cc: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20230218183842.never.954-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Horatiu Vultur [Fri, 17 Feb 2023 21:09:17 +0000 (22:09 +0100)]
net: lan966x: Fix possible deadlock inside PTP
When doing timestamping in lan966x and having PROVE_LOCKING
enabled the following warning is shown.
========================================================
WARNING: possible irq lock inversion dependency detected
6.2.0-rc7-01749-gc54e1f7f7e36 #2786 Tainted: G N
--------------------------------------------------------
swapper/0/0 just changed the state of lock:
c2609f50 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x16c/0x2e8
but this lock took another, SOFTIRQ-unsafe lock in the past:
(&lan966x->ptp_ts_id_lock){+.+.}-{2:2}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&lan966x->ptp_ts_id_lock);
local_irq_disable();
lock(_xmit_ETHER#2);
lock(&lan966x->ptp_ts_id_lock);
<Interrupt>
lock(_xmit_ETHER#2);
*** DEADLOCK ***
5 locks held by swapper/0/0:
#0:
c1001e18 ((&ndev->rs_timer)){+.-.}-{0:0}, at: call_timer_fn+0x0/0x33c
#1:
c105e7c4 (rcu_read_lock){....}-{1:2}, at: ndisc_send_skb+0x134/0x81c
#2:
c105e7d8 (rcu_read_lock_bh){....}-{1:2}, at: ip6_finish_output2+0x17c/0xc64
#3:
c105e7d8 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x4c/0x1224
#4:
c3056174 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x354/0x1224
the shortest dependencies between 2nd lock and 1st lock:
-> (&lan966x->ptp_ts_id_lock){+.+.}-{2:2} {
HARDIRQ-ON-W at:
lock_acquire.part.0+0xb0/0x248
_raw_spin_lock+0x38/0x48
lan966x_ptp_irq_handler+0x164/0x2a8
irq_thread_fn+0x1c/0x78
irq_thread+0x130/0x278
kthread+0xec/0x110
ret_from_fork+0x14/0x28
SOFTIRQ-ON-W at:
lock_acquire.part.0+0xb0/0x248
_raw_spin_lock+0x38/0x48
lan966x_ptp_irq_handler+0x164/0x2a8
irq_thread_fn+0x1c/0x78
irq_thread+0x130/0x278
kthread+0xec/0x110
ret_from_fork+0x14/0x28
INITIAL USE at:
lock_acquire.part.0+0xb0/0x248
_raw_spin_lock_irqsave+0x4c/0x68
lan966x_ptp_txtstamp_request+0x128/0x1cc
lan966x_port_xmit+0x224/0x43c
dev_hard_start_xmit+0xa8/0x2f0
sch_direct_xmit+0x108/0x2e8
__dev_queue_xmit+0x41c/0x1224
packet_sendmsg+0xdb4/0x134c
__sys_sendto+0xd0/0x154
sys_send+0x18/0x20
ret_fast_syscall+0x0/0x1c
}
... key at: [<
c174ba0c>] __key.2+0x0/0x8
... acquired at:
_raw_spin_lock_irqsave+0x4c/0x68
lan966x_ptp_txtstamp_request+0x128/0x1cc
lan966x_port_xmit+0x224/0x43c
dev_hard_start_xmit+0xa8/0x2f0
sch_direct_xmit+0x108/0x2e8
__dev_queue_xmit+0x41c/0x1224
packet_sendmsg+0xdb4/0x134c
__sys_sendto+0xd0/0x154
sys_send+0x18/0x20
ret_fast_syscall+0x0/0x1c
-> (_xmit_ETHER#2){+.-.}-{2:2} {
HARDIRQ-ON-W at:
lock_acquire.part.0+0xb0/0x248
_raw_spin_lock+0x38/0x48
netif_freeze_queues+0x38/0x68
dev_deactivate_many+0xac/0x388
dev_deactivate+0x38/0x6c
linkwatch_do_dev+0x70/0x8c
__linkwatch_run_queue+0xd4/0x1e8
linkwatch_event+0x24/0x34
process_one_work+0x284/0x744
worker_thread+0x28/0x4bc
kthread+0xec/0x110
ret_from_fork+0x14/0x28
IN-SOFTIRQ-W at:
lock_acquire.part.0+0xb0/0x248
_raw_spin_lock+0x38/0x48
sch_direct_xmit+0x16c/0x2e8
__dev_queue_xmit+0x41c/0x1224
ip6_finish_output2+0x5f4/0xc64
ndisc_send_skb+0x4cc/0x81c
addrconf_rs_timer+0xb0/0x2f8
call_timer_fn+0xb4/0x33c
expire_timers+0xb4/0x10c
run_timer_softirq+0xf8/0x2a8
__do_softirq+0xd4/0x5fc
__irq_exit_rcu+0x138/0x17c
irq_exit+0x8/0x28
__irq_svc+0x90/0xbc
arch_cpu_idle+0x30/0x3c
default_idle_call+0x44/0xac
do_idle+0xc8/0x138
cpu_startup_entry+0x18/0x1c
rest_init+0xcc/0x168
arch_post_acpi_subsys_init+0x0/0x8
INITIAL USE at:
lock_acquire.part.0+0xb0/0x248
_raw_spin_lock+0x38/0x48
netif_freeze_queues+0x38/0x68
dev_deactivate_many+0xac/0x388
dev_deactivate+0x38/0x6c
linkwatch_do_dev+0x70/0x8c
__linkwatch_run_queue+0xd4/0x1e8
linkwatch_event+0x24/0x34
process_one_work+0x284/0x744
worker_thread+0x28/0x4bc
kthread+0xec/0x110
ret_from_fork+0x14/0x28
}
... key at: [<
c175974c>] netdev_xmit_lock_key+0x8/0x1c8
... acquired at:
__lock_acquire+0x978/0x2978
lock_acquire.part.0+0xb0/0x248
_raw_spin_lock+0x38/0x48
sch_direct_xmit+0x16c/0x2e8
__dev_queue_xmit+0x41c/0x1224
ip6_finish_output2+0x5f4/0xc64
ndisc_send_skb+0x4cc/0x81c
addrconf_rs_timer+0xb0/0x2f8
call_timer_fn+0xb4/0x33c
expire_timers+0xb4/0x10c
run_timer_softirq+0xf8/0x2a8
__do_softirq+0xd4/0x5fc
__irq_exit_rcu+0x138/0x17c
irq_exit+0x8/0x28
__irq_svc+0x90/0xbc
arch_cpu_idle+0x30/0x3c
default_idle_call+0x44/0xac
do_idle+0xc8/0x138
cpu_startup_entry+0x18/0x1c
rest_init+0xcc/0x168
arch_post_acpi_subsys_init+0x0/0x8
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G N 6.2.0-rc7-01749-gc54e1f7f7e36 #2786
Hardware name: Generic DT based system
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from mark_lock.part.0+0x59c/0x93c
mark_lock.part.0 from __lock_acquire+0x978/0x2978
__lock_acquire from lock_acquire.part.0+0xb0/0x248
lock_acquire.part.0 from _raw_spin_lock+0x38/0x48
_raw_spin_lock from sch_direct_xmit+0x16c/0x2e8
sch_direct_xmit from __dev_queue_xmit+0x41c/0x1224
__dev_queue_xmit from ip6_finish_output2+0x5f4/0xc64
ip6_finish_output2 from ndisc_send_skb+0x4cc/0x81c
ndisc_send_skb from addrconf_rs_timer+0xb0/0x2f8
addrconf_rs_timer from call_timer_fn+0xb4/0x33c
call_timer_fn from expire_timers+0xb4/0x10c
expire_timers from run_timer_softirq+0xf8/0x2a8
run_timer_softirq from __do_softirq+0xd4/0x5fc
__do_softirq from __irq_exit_rcu+0x138/0x17c
__irq_exit_rcu from irq_exit+0x8/0x28
irq_exit from __irq_svc+0x90/0xbc
Exception stack(0xc1001f20 to 0xc1001f68)
1f20:
ffffffff ffffffff 00000001 c011f840 c100e000 c100e000 c1009314 c1009370
1f40:
c10f0c1a c0d5e564 c0f5da8c 00000000 00000000 c1001f70 c010f0bc c010f0c0
1f60:
600f0013 ffffffff
__irq_svc from arch_cpu_idle+0x30/0x3c
arch_cpu_idle from default_idle_call+0x44/0xac
default_idle_call from do_idle+0xc8/0x138
do_idle from cpu_startup_entry+0x18/0x1c
cpu_startup_entry from rest_init+0xcc/0x168
rest_init from arch_post_acpi_subsys_init+0x0/0x8
Fix this by using spin_lock_irqsave/spin_lock_irqrestore also
inside lan966x_ptp_irq_handler.
Fixes:
e85a96e48e33 ("net: lan966x: Add support for ptp interrupts")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230217210917.2649365-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Fri, 17 Feb 2023 20:09:20 +0000 (12:09 -0800)]
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
Commit
2c02d41d71f9 ("net/ulp: prevent ULP without clone op from entering
the LISTEN status") guarantees that all ULP listeners have clone() op, so
we no longer need to test it in inet_clone_ulp().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230217200920.85306-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>