Daniel Jacobowitz [Fri, 5 Sep 2008 14:49:05 +0000 (14:49 +0000)]
* readelf.c (load_specific_debug_section): New function, from
load_debug_section.
(load_debug_section): Use load_specific_debug_section.
(display_debug_section): Use load_specific_debug_section. Check for
multiple sections with the same name.
Ulrich Weigand [Fri, 5 Sep 2008 12:57:16 +0000 (12:57 +0000)]
* gdbarch.sh (gdbarch_dump): Use core_addr_to_string_nz
instead of paddr_nz.
* gdbarch.c: Regenerate.
* target.c (target_xfer_partial, debug_print_register): Use
core_addr_to_string_nz instead of paddr_nz.
Ulrich Weigand [Fri, 5 Sep 2008 11:58:30 +0000 (11:58 +0000)]
* rs6000-tdep.c (rs6000_gdbarch_init): Setup displaced stepping
*before* calling gdbarch_init_osabi.
(rs6000_aix_init_osabi): Disable displaced stepping.
Ulrich Weigand [Fri, 5 Sep 2008 11:50:57 +0000 (11:50 +0000)]
* target.c (update_current_target): Do not inherit to_open
or to_close.
(pop_target): Call target_close on target_stack instead
of current_target.
(pop_all_targets_above): Likewise.
Ulrich Weigand [Fri, 5 Sep 2008 11:49:59 +0000 (11:49 +0000)]
* gnu-v3-abi.c (gnuv3_decode_method_ptr): New function.
(gnuv3_print_method_ptr): Use it.
(gnuv3_method_ptr_to_value): Likewise.
Ulrich Weigand [Fri, 5 Sep 2008 11:46:46 +0000 (11:46 +0000)]
* nto-tdep.h (struct nto_target_ops): Add gdbarch parameter to
register_area callback function.
* i386-nto-tdep.c (i386nto_register_area): Add gdbarch parameter.
Use it instead of current_gdbarch.
* nto-procfs.c (procfs_store_registers): Update call.
Ulrich Weigand [Fri, 5 Sep 2008 11:46:12 +0000 (11:46 +0000)]
* mips-tdep.c (deprecated_mips_set_processor_regs_hack): Use
regcache architecture instead of current_gdbarch.
Ulrich Weigand [Fri, 5 Sep 2008 11:45:37 +0000 (11:45 +0000)]
* mep-tdep.c (struct mep_prologue): Add gdbarch member.
(check_for_saved): Use it instead of current_gdbarch.
(is_arg_spill): Add gdbarch paramter. Use it instead
of current_gdbarch.
(mep_analyze_prologue): Add gdbarch parameter. Pass it
to is_arg_spill and check_for_saved.
(mep_skip_prologue, mep_analyze_frame_prologue): Update calls.
Ulrich Weigand [Fri, 5 Sep 2008 11:45:01 +0000 (11:45 +0000)]
* hppa-tdep.c (internalize_unwinds): Use objfile architecture
instead of current_gdbarch.
Ulrich Weigand [Fri, 5 Sep 2008 11:44:24 +0000 (11:44 +0000)]
* m68k-tdep.h (m68kbsd_fpreg_offset): Add gdbarch parameter.
* m68kbsd-tdep.c (m68kbsd_fpreg_offset): Add gdbarch paramter.
Use it instead of current_gdbarch.
(m68kbsd_supply_fpregset): Update call.
* m68kbsd-nat.c (m68kbsd_supply_fpregset): Likewise.
(m68kbsd_collect_fpregset): Likewise.
Ulrich Weigand [Fri, 5 Sep 2008 11:43:49 +0000 (11:43 +0000)]
* cris-tdep.c (cris_version, cris_mode): Remove.
(crisv32_single_step_through_delay): Use tdep->cris_mode.
(cris_breakpoint_from_pc): Likewise.
(cris_frame_unwind_cache): Use tdep->cris_version.
(crisv32_scan_prologue): Likewise.
(cris_spec_reg_applicable): Add gdbarch argument.
Use tdep->cris_version.
(cris_register_size, cris_special_register_name): Update calls.
(cris_special_register_name): Add gdbarch argument.
(cris_register_name, crisv32_register_name): Update calls.
Ulrich Weigand [Fri, 5 Sep 2008 11:43:10 +0000 (11:43 +0000)]
* m68hc11-tdep.c (gdb_print_insn_m68hc11): Use info->arch
instead of current_gdbarch.
* sh64-tdep.c (gdb_print_insn_sh64): Remove.
(sh64_gdbarch_init): Install print_insn_sh64 directly.
* sh-tdep.c (gdb_print_insn_sh): Remove.
(sh_gdbarch_init): Install print_insn_sh directly.
* mips-tdep.c (gdb_print_insn_mips): Do not check mips_abi
from current_gdbarch.
(gdb_print_insn_mips_n32, gdb_print_insn_mips_n64): New functions.
(mips_gdbarch_init): Install them instead of gdb_print_insn_mips
depending on mips_abi.
Ulrich Weigand [Fri, 5 Sep 2008 11:42:32 +0000 (11:42 +0000)]
* gdbarch.sh (addr_bits_remove): Change type to 'm'.
(smash_text_address): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.
* arch-utils.c (core_addr_identity): Add gdbarch parameter.
* arch-utils.h (core_addr_identity): Likewise.
* arm-tdep.c (arm_addr_bits_remove): Likewise.
(arm_smash_text_address): Likewise.
* hppa-tdep.c (hppa_smash_text_address): Likewise.
* m88k-tdep.c (m88k_addr_bits_remove): Likewise.
* s390-tdep.c (s390_addr_bits_remove): Likewise.
* mips-tdep.c (mips_addr_bits_remove): Add gdbarch parameter.
Use it instead of current_gdbarch.
* arm-tdep.c (arm_prologue_prev_register, arm_unwind_pc,
arm_dwarf2_prev_register): Update calls.
* m88k-tdep.c (m88k_unwind_pc): Update call.
Ulrich Weigand [Fri, 5 Sep 2008 11:40:53 +0000 (11:40 +0000)]
* dwarf2expr.h (dwarf2_read_address): Add gdbarch argument.
* dwarf2expr.c (dwarf2_read_address): Add gdbarch argument.
Call gdbarch_integer_to_address directly instead of converting
to value and back. Update comment.
(execute_stack_op): Update call site.
* dwarf2loc.c (find_location_expression): Likewise.
(locexpr_describe_location): Update
* dwarf2expr.h (struct dwarf_expr_context): Add gdbarch member.
* dwarf2-frame.c (execute_stack_op): Initialize ctx->gdbarch.
* dwarf2loc. (dwarf2_evaluate_loc_desc): Likewise.
(dwarf2_loc_desc_needs_frame): Likewise.
Ulrich Weigand [Fri, 5 Sep 2008 11:37:18 +0000 (11:37 +0000)]
* breakpoint.h (struct bp_location): Change type of section
member to "struct obj_section *".
* tracepoint.h (struct tracepoint): Likewise.
* symtab.h (struct general_symbol_info): Replace bfd_section
member with obj_section.
(struct symtab_and_line): Change type of section member to
"struct obj_section *".
(SYMBOL_BFD_SECTION): Remove macro, replace by ...
(SYMBOL_OBJ_SECTION): ... this.
* minsym.c (prim_record_minimal_symbol_and_info): Record symbol
section as obj_section instead of bfd_section.
* ada-lang.c (ada_decode_symbol): Use gsymbol->obj_section
directly instead of looking of obj_section from bfd_section.
* objfiles.h (find_pc_sect_section): Remove.
* objfiles.c (find_pc_sect_section): Remove.
(find_pc_section): Inline find_pc_sect_section code.
* symfile.h (find_pc_overlay): Return struct obj_section *.
(find_pc_mapped_section): Likewise.
(section_is_overlay, section_is_mapped): Change type of section
argument to struct obj_section *.
(pc_in_mapped_range, pc_in_unmapped_range): Likewise.
(overlay_mapped_address, overlay_unmapped_address): Likewise.
(symbol_overlayed_address): Likewise.
* symtab.h (symbol_overlayed_address): Likewise.
* symfile.c (overlay_is_mapped): Remove.
(section_is_mapped): Inline overlay_is_mapped code. Update.
(overlay_invalidate_all): Update.
(section_is_overlay): Change section argument to type
"struct obj_section *". Use bfd_ methods.
(pc_in_unmapped_range): Likewise. Handle relocated sections.
(pc_in_mapped_range): Likewise. Handle relocated sections.
(sections_overlap): Likewise.
(overlay_unmapped_address): Likewise.
(overlay_mapped_address): Likewise.
(symbol_overlayed_address): Likewise.
(find_pc_overlay): Return struct obj_section *.
(find_pc_mapped_section): Likewise.
(list_overlays_command): Update.
(map_overlay_command, unmap_overlay_command): Update.
(simple_overlay_update): Update.
* block.h (blockvector_for_pc_sect): Change section argument
to type "struct obj_section *".
(block_for_pc_sect): Likewise.
* block.c (blockvector_for_pc_sect): Change section argument
to type "struct obj_section *".
(block_for_pc_sect): Likewise.
* symtab.h (find_pc_sect_function, find_pc_sect_psymtab,
find_pc_sect_symtab, find_pc_sect_psymbol, find_pc_sect_line,
lookup_minimal_symbol_by_pc_section, find_function_start_pc): Likewise.
(matching_bfd_sections): Rename to ...
(matching_obj_sections): ... this. Update argument types.
* blockframe.c (find_pc_sect_function): Likewise.
* breakpoint.c (describe_other_breakpoints): Likewise.
(breakpoint_has_pc, check_duplicates_for): Likewise.
* minsyms.c (lookup_minimal_symbol_by_pc_section_1): Likewise.
(lookup_minimal_symbol_by_pc_section): Likewise.
* symtab.c (find_pc_sect_psymtab_closer): Likewise.
(find_pc_sect_psymtab, find_pc_sect_psymbol, find_pc_sect_symtab,
find_pc_sect_line, find_function_start_pc): Likewise.
(matching_bfd_sections): Rename to ...
(matching_obj_sections): ... this. Update argument types.
* blockframe.c (find_pc_partial_function): Update to section
type changes. No longer call find_pc_sect_section.
(cache_pc_function_section): Change to type "struct obj_section *".
* breakpoint.c (resolve_sal_pc): Update to section type changes.
* exec.c (xfer_memory): Likewise.
* findvar.c (read_var_value): Likewise.
* infcmd.c (jump_command): Likewise.
* linespec.c (minsym_found): Likewise.
* maint.c (maintenance_translate_address): Likewise.
* minsyms.c (lookup_minimal_symbol_by_pc_section_1): Likewise.
(lookup_solib_trampoline_symbol_by_pc): Likewise.
* parse.c (write_exp_msymbol): Likewise.
* printcmd.c (build_address_symbolic): Likewise.
(address_info, sym_info): Likewise.
* symmisc.c (dump_msymbols, print_symbol): Likewise.
* symtab.c (fixup_section): Likewise.
(fixup_symbol_section, fixup_psymbol_section): Likewise.
(find_pc_line, find_function_start_sal): Likewise.
* target.c (memory_xfer_partial): Likewise.
* hppa-hpux-tdep.c (hppa64_hpux_in_solib_call_trampoline): Likewise.
* spu-tdep.c (spu_overlay_update): Likewise.
Nick Clifton [Fri, 5 Sep 2008 11:24:30 +0000 (11:24 +0000)]
* gas/arm/abs12.d: Update expected disassembly.
* gas/arm/tls_vxworks.d: Likewise.
* gas/arm/unwind_vxworks.d: Likewise.
* gas/arm/group-reloc-alu-encoding-bad.d: Skip for vxworks
targets.
* gas/arm/group-reloc-alu.d: Likewise.
* gas/arm/group-reloc-ldc-encoding-bad.d: Likewise.
* gas/arm/group-reloc-ldc.d: Likewise.
* gas/arm/group-reloc-ldr-encoding-bad.d: Likewise.
* gas/arm/group-reloc-ldr.d: Likewise.
* gas/arm/group-reloc-ldrs-encoding-bad.d: Likewise.
* gas/arm/group-reloc-ldrs.d: Likewise.
* gas/arm/local_function.d: Likewise.
* gas/arm/mapshort-elf.d: Likewise.
* gas/arm/undefined.d: Likewise.
Nick Clifton [Fri, 5 Sep 2008 11:19:13 +0000 (11:19 +0000)]
* lib/gas-defs.exp (run_dump_test): If the test expects an error,
fail the test if gas doesn't report an error.
Tristan Gingold [Fri, 5 Sep 2008 08:07:54 +0000 (08:07 +0000)]
2008-09-05 Tristan Gingold <gingold@adacore.com>
Add MacOSX 64 bits support.
* mach-o.h (bfd_mach_o_ppc_thread_flavour): Add
BFD_MACH_O_PPC_THREAD_STATE_64.
(bfd_mach_o_i386_thread_flavour): Add BFD_MACH_O_x86_THREAD_STATE64,
BFD_MACH_O_x86_FLOAT_STATE64, BFD_MACH_O_x86_EXCEPTION_STATE64,
BFD_MACH_O_x86_THREAD_STATE, BFD_MACH_O_x86_FLOAT_STATE,
BFD_MACH_O_x86_EXCEPTION_STATE.
(bfd_mach_o_load_command_type): Add
BFD_MACH_O_LC_SEGMENT_64, BFD_MACH_O_LC_ROUTINES_64,
BFD_MACH_O_LC_UUID.
(BFD_MACH_O_CPU_IS64BIT): Added.
(bfd_mach_o_cpu_type): Add BFD_MACH_O_CPU_TYPE_POWERPC_64,
BFD_MACH_O_CPU_TYPE_X86_64.
(bfd_mach_o_header): Add version field.
(bfd_mach_o_section) Add reserved3 field.
(bfd_mach_o_segment_command): Add initprot and maxprot fields.
* mach-o.c (N_TEXT, N_DATA, N_BSS): Added.
(bfd_mach_o_version): New function.
(bfd_mach_o_valid): Handle 64bits cpus.
(bfd_mach_o_write_header): handler 64bits headers.
(bfd_mach_o_scan_write_section_32, bfd_mach_o_scan_write_section_64):
New functions (from bfd_mach_o_scan_write_section) to handle both
flavors.
(bfd_mach_o_scan_write_segment): Parameter wide added to support
both flavors.
(bfd_mach_o_write_contents): Support both flavors.
(bfd_mach_o_read_header): Ditto.
(bfd_mach_o_scan_read_section_32, bfd_mach_o_scan_read_section_64):
New functions (from bfd_mach_o_scan_read_section) to support both
flavors.
(bfd_mach_o_scan_read_symtab_symbol): Support both flavors.
(bfd_mach_o_scan_read_symtab): Ditto.
(bfd_mach_o_scan_read_segment): Parameter wide added to support
both flavors.
(bfd_mach_o_scan_read_segment_32, bfd_mach_o_scan_read_segment_64):
New functions to call bfd_mach_o_scan_read_segment.
(bfd_mach_o_flatten_sections): Support both flavors.
(bfd_mach_o_scan_start_address): Ditto.
(bfd_mach_o_scan): Ditto.
(bfd_mach_o_lookup_section): Ditto.
Alan Modra [Fri, 5 Sep 2008 00:00:06 +0000 (00:00 +0000)]
daily update
gdbadmin [Fri, 5 Sep 2008 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Doug Evans [Thu, 4 Sep 2008 22:49:30 +0000 (22:49 +0000)]
* defs.h (plongest,pulongest): Renamed from paddr_u,paddr_d.
Change argument of pulongest from CORE_ADDR to ULONGEST.
All callers updated.
* utils.c (plongest): Renamed from paddr_d.
(pulongest): Renamed from paddr_u, change arg type to ULONGEST.
* remote-mips.c (send_srec): Use paddr_nz instead of paddr_u in
`CORE_ADDR addr' arg of error message.
Michael Snyder [Thu, 4 Sep 2008 22:00:25 +0000 (22:00 +0000)]
2008-09-04 Michael Snyder <msnyder@vmware.com>
* lib/gdb.exp (gdb_continue_to_breakpoint): Accept "in" as well
as "at" (for non-debug functions such as _start).
Daniel Jacobowitz [Thu, 4 Sep 2008 17:05:24 +0000 (17:05 +0000)]
* configure.srv: Merge MIPS and MIPS64.
Aaron W. LaFramboise [Thu, 4 Sep 2008 02:18:16 +0000 (02:18 +0000)]
2008-08-31 Aaron W. LaFramboise <aaronavay62@aaronwl.com>
* configure.ac (RPATH_ENVVAR): Use PATH on Windows.
(GCC_SHLIB_SUBDIR): New.
* Makefile.tpl (HOST_LIB_PATH_gcc): Use GCC_SHLIB_SUBDIR.
* configure: Regenerate.
* Makefile.in: Regenerate.
Ulrich Weigand [Thu, 4 Sep 2008 00:51:04 +0000 (00:51 +0000)]
* gdb.base/value-double-free.exp: Respect gdb,no_hardware_watchpoints.
* gdb.base/watchpoint-solib.exp: Likewise. Update tests to handle
software watchpoints.
* gdb.base/watch_thread_num.exp: Likewise.
gdbadmin [Thu, 4 Sep 2008 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Thu, 4 Sep 2008 00:00:06 +0000 (00:00 +0000)]
daily update
Michael Snyder [Wed, 3 Sep 2008 23:54:19 +0000 (23:54 +0000)]
2008-09-03 Angela Marie Thomas <angela@releasedominatrix.com>
* ser-tcp.c (ser_tcp_send_break): New function.
(_initialize_ser_tcp): Use ser_tcp_send_break.
* ser-tcp.h (ser_tcp_send_break): New prototype.
2008-09-03 Angela Marie Thomas <angela@releasedominatrix.com>
* gdb.texinfo (Interrupts): Mention TCP interface for
sending BREAK.
Ulrich Weigand [Wed, 3 Sep 2008 21:27:05 +0000 (21:27 +0000)]
* spu-tdep.c (spu_push_dummy_call): Update all stack pointer slots
when allocating stack frame for inferior call.
Ulrich Weigand [Wed, 3 Sep 2008 19:19:42 +0000 (19:19 +0000)]
* spu-tdep.c (spu_frame_unwind_cache): Do not attempt to unwind
SP or return address if we failed to find a valid frame.
Nick Clifton [Wed, 3 Sep 2008 15:44:33 +0000 (15:44 +0000)]
Make new functions static.
Rearrange wording of documentation.
Nick Clifton [Wed, 3 Sep 2008 14:02:30 +0000 (14:02 +0000)]
* config/tc-i386.c (pe_lcomm_internal): New function. Allows the
alignment field of the .lcomm directive to be optional.
(pe_lcomm): New function. Pass pe_lcomm_internal to
s_comm_internal.
(md_pseudo_table): Implement .lcomm directive for COFF based
targets.
* doc/c-i386.texi (i386-Directives): New node. Used to document
the .lcomm directive.
Aleksandar Ristovski [Wed, 3 Sep 2008 13:39:56 +0000 (13:39 +0000)]
* breakpoint.c (breakpoint_init_inferior): Mark as not inserted only
non-permanent breakpoints.
(bpstat_stop_status): Change enable_state to bp_disabled only for
non-permanent breakpoints.
(bp_loc_is_permanent): New function.
(create_breakpoint): Check if the location points to a permanent
breakpoint and if it does, make breakpoint permanent.
(update_breakpoint_locations): Make sure new locations of permanent
breakpoints are properly initialized.
* i386-tdep.c (i386_skip_permanent_breakpoint): New function.
(i386_gdbarch_init): Set gdbarch_skip_permanent_breakpoint.
* gdb.arch/i386-bp_permanent.exp: New test.
gdbadmin [Wed, 3 Sep 2008 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Wed, 3 Sep 2008 00:00:05 +0000 (00:00 +0000)]
daily update
Pedro Alves [Tue, 2 Sep 2008 15:14:52 +0000 (15:14 +0000)]
* breakpoint.c (insert_breakpoints, update_global_location_list):
Check breakpoints_always_inserted_mode instead of
always_inserted_mode directly.
Andreas Schwab [Tue, 2 Sep 2008 09:32:56 +0000 (09:32 +0000)]
(ia64_get_dyn_info_list): Use obj_section_addr.
gdbadmin [Tue, 2 Sep 2008 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Tue, 2 Sep 2008 00:00:06 +0000 (00:00 +0000)]
daily update
Jan Kratochvil [Mon, 1 Sep 2008 22:24:05 +0000 (22:24 +0000)]
Stay compatible after the GCC PR fortran/29635 fix.
* dwarf2read.c (process_die <DW_TAG_imported_module>)
(process_die <DW_TAG_imported_module>): Do not assert anything about
these unsupported tags.
Alan Modra [Mon, 1 Sep 2008 00:00:06 +0000 (00:00 +0000)]
daily update
gdbadmin [Mon, 1 Sep 2008 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
gdbadmin [Sun, 31 Aug 2008 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sun, 31 Aug 2008 00:00:06 +0000 (00:00 +0000)]
daily update
Dave Anglin [Sat, 30 Aug 2008 15:52:22 +0000 (15:52 +0000)]
* config/tc-hppa.h: Don't define DWARF2_EH_FRAME_READ_ONLY on Linux
and NetBSD.
Doug Evans [Sat, 30 Aug 2008 01:54:11 +0000 (01:54 +0000)]
revert previous change, like interpreting English is obvious ...
Alan Modra [Sat, 30 Aug 2008 00:05:55 +0000 (00:05 +0000)]
daily update
gdbadmin [Sat, 30 Aug 2008 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Doug Evans [Fri, 29 Aug 2008 23:52:34 +0000 (23:52 +0000)]
* cli/cli-decode.c (help_cmd): Fix thinko in pre/post hook help output.
Tom Tromey [Fri, 29 Aug 2008 18:31:34 +0000 (18:31 +0000)]
* maint.c (_initialize_maint_cmds): Fix typo.
Tom Tromey [Fri, 29 Aug 2008 17:06:05 +0000 (17:06 +0000)]
* dwarf2read.c (dwarf2_build_psymtabs_hard): Copy dirname on
obstack.
Nick Clifton [Fri, 29 Aug 2008 16:58:02 +0000 (16:58 +0000)]
* config/tc-avr.c (mcu_types): Add atmega16u4.
* doc/c-avr.texi: Likewise.
gdbadmin [Fri, 29 Aug 2008 00:00:36 +0000 (00:00 +0000)]
*** empty log message ***
Tristan Gingold [Thu, 28 Aug 2008 16:05:03 +0000 (16:05 +0000)]
2008-08-28 Tristan Gingold <gingold@adacore.com>
* objdump.c (dump_stabs): Add sections for Darwin.
Tristan Gingold [Thu, 28 Aug 2008 16:04:18 +0000 (16:04 +0000)]
2008-08-28 Tristan Gingold <gingold@adacore.com>
* stab.def: Add BNSYM, ENSYM, OSO for darwin.
Jan Beulich [Thu, 28 Aug 2008 15:59:32 +0000 (15:59 +0000)]
gas/testsuite/
2008-08-28 Jan Beulich <jbeulich@novell.com>
* gas/i386/intel.s: Add retf.
* gas/i386/intel.{d,e}: Adjust.
* gas/i386/opcode-intel.d: Replace lret with retf.
opcodes/
2008-08-28 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (dis386): Adjust far return mnemonics.
* i386-opc.tbl: Add retf.
* i386-tbl.h: Re-generate.
Jan Beulich [Thu, 28 Aug 2008 15:30:30 +0000 (15:30 +0000)]
gas/testsuite/
2008-08-28 Jan Beulich <jbeulich@novell.com>
* gas/i386/gas/i386/opcode-suffix.d: Add suffixes to cmovXX.
opcodes/
2008-08-28 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (dis386_twobyte): Adjust cmovXX mnemonics.
Kris Van Hees [Thu, 28 Aug 2008 14:51:04 +0000 (14:51 +0000)]
2008-08-28 Kris Van Hees <kris.van.hees@oracle.com>
PR gold/6858
* options.cc (General_options::finalize): Allow undefined symbols
in shlibs if linking -shared.
PR gold/6859
* symtab.cc (Symbol::init_base_undefined): Mark explicitly undefined
symbols as not needing a dynsym entry.
H.J. Lu [Thu, 28 Aug 2008 14:07:50 +0000 (14:07 +0000)]
gas/
2008-08-28 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-ia64.c (CR_IIB0): New.
(CR_IIB1): Likewise.
(cr): Add cr.iib0 and cr.iib1.
(specify_resource): Handle IA64_RS_CR_IIB and CR_IIB0/CR_IIB1.
gas/testsuite/
2008-08-28 H.J. Lu <hongjiu.lu@intel.com>
* gas/ia64/dv-raw-err.s: Add tests for cr.iib0 and cr.iib1.
* gas/ia64/dv-waw-err.s: Likewise.
* gas/ia64/regs.s: Likewise.
* gas/ia64/dv-raw-err.l: Updated.
* gas/ia64/dv-waw-err.l: Likewise.
* gas/ia64/regs.d: Likewise.
include/opcode/
2008-08-28 H.J. Lu <hongjiu.lu@intel.com>
* ia64.h (ia64_resource_specifier): Add IA64_RS_CR_IIB. Update
IA64_RS_CR.
opcodes/
2008-08-28 H.J. Lu <hongjiu.lu@intel.com>
* ia64-dis.c (print_insn_ia64): Handle cr.iib0 and cr.iib1.
* ia64-gen.c (lookup_specifier): Likewise.
* ia64-ic.tbl: Add support for cr.iib0 and cr.iib1.
* ia64-raw.tbl: Likewise.
* ia64-waw.tbl: Likewise.
* ia64-asmtab.c: Regenerated.
Tristan Gingold [Thu, 28 Aug 2008 10:44:31 +0000 (10:44 +0000)]
2008-08-28 Tristan Gingold <gingold@adacore.com>
* configure.ac (powerpc-*-darwin*, i?86-*-darwin*,x86_64-*-darwin9):
Enable bfd, binutils and opcodes.
* configure: Regenerate.
Tristan Gingold [Thu, 28 Aug 2008 10:20:05 +0000 (10:20 +0000)]
2008-08-28 Tristan Gingold <gingold@adacore.com>
* configure.ac (powerpc-*-darwin*, i?86-*-darwin*,x86_64-*-darwin9):
Enable bfd, binutils and opcodes.
* configure: Regenerate.
Jan Beulich [Thu, 28 Aug 2008 09:42:11 +0000 (09:42 +0000)]
gas/
2008-08-28 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (md_assemble): Force number of displacement
operands to zero when processing string instruction.
(i386_index_check): Special-case string instruction operands. Don't
fudge address prefix if there already was a memory operand. Fix
error message to correctly reflect the addressing mode used.
(i386_att_operand): Fix comment.
(i386_intel_operand): Snapshot, clear, and restore base and index
reg for each operand processed. Increment count of memory operands
later.
gas/testsuite/
2008-08-28 Jan Beulich <jbeulich@novell.com>
* gas/i386/string-bad.{l,s}, gas/i386/string-ok.{d,e,s}: New.
* gas/i386/i386.exp: Run new tests.
Dave Anglin [Thu, 28 Aug 2008 02:33:45 +0000 (02:33 +0000)]
* elf-hppa.h (elf_hppa_reloc_final_type): Handle R_PARISC_GPREL64,
R_PARISC_SEGREL32 and R_PARISC_SEGREL64.
* som.c (som_fixup_formats): Add R_DATA_GPREL fixup.
(som_hppa_howto_table): Likewise.
(hppa_som_gen_reloc_type): In case R_HPPA_GOTOFF, detect R_DATA_GPREL
final type.
(som_write_fixups): Handle R_DATA_GPREL.
* config/tc-hppa.c (is_SB_relative): New macro.
(fix_new_hppa): Remove $segrel$ marker.
(cons_fix_new_hppa): Set reloc type R_PARISC_SEGREL32 if expression is
segment relative.
* config/tc-hppa.h (tc_frob_symbol): Check for $segrel$.
gdbadmin [Thu, 28 Aug 2008 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***
H.J. Lu [Wed, 27 Aug 2008 17:53:42 +0000 (17:53 +0000)]
gas/testsuite/
2008-08-27 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/intel.s: Add tests for fidivr.
* gas/i386/intel.d: Updated.
opcodes/
2008-08-27 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.tbl: Correct fidivr operand size.
* i386-tbl.h: Regenerated.
Jan Beulich [Wed, 27 Aug 2008 16:24:32 +0000 (16:24 +0000)]
gas/
2008-08-27 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (check_string): Use register_prefix for error
message.
(process_operands): Likewise.
Ulrich Weigand [Wed, 27 Aug 2008 13:25:21 +0000 (13:25 +0000)]
* remote.c: Include "gdb_stat.h".
Alan Modra [Wed, 27 Aug 2008 00:00:06 +0000 (00:00 +0000)]
daily update
gdbadmin [Wed, 27 Aug 2008 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***
Ulrich Weigand [Tue, 26 Aug 2008 17:40:25 +0000 (17:40 +0000)]
* dummy-frame.h (dummy_frame_pop): Add prototype.
* dummy-frame.c: Include "observer.h".
(dummy_frame_push): Do not check for stale frames.
(dummy_frame_pop): New function.
(cleanup_dummy_frames): New function.
(_initialize_dummy_frame): Install it as inferior_created observer.
* frame.h (struct frame_id): Update comments.
(frame_id_inner): Remove prototype.
* frame.c (frame_id_inner): Make static. Add comments.
(frame_find_by_id): Update frame_id_inner safety net check to avoid
false positives for targets using non-contiguous stack ranges.
(get_prev_frame_1): Update frame_id_inner safety net check.
(frame_pop): Call dummy_frame_pop when popping a dummy frame.
* stack.c (return_command): Directly pop the selected frame.
* infrun.c (handle_inferior_event): Remove dead code.
* i386-tdep.c (i386_push_dummy_call): Update comment.
Ulrich Weigand [Tue, 26 Aug 2008 17:36:44 +0000 (17:36 +0000)]
* breakpoint.c (remove_breakpoint): Do not fail if unable to remove
breakpoint from shared library.
Ulrich Weigand [Tue, 26 Aug 2008 17:33:51 +0000 (17:33 +0000)]
* solib-svr4.c (read_program_header): New function.
(scan_dyntag_auxv): New function.
(elf_locate_base): Use it if scan_dyntag fails.
(find_program_interpreter): New function.
(enable_break): Use it instead of .interp section.
Ulrich Weigand [Tue, 26 Aug 2008 17:30:35 +0000 (17:30 +0000)]
ChangeLog:
* remote.h (remote_filename_p, remote_bfd_open): Add prototypes.
* remote.c (remote_bfd_iovec_open, remote_bfd_iovec_close,
remote_bfd_iovec_pread, remote_bfd_iovec_stat, remote_filename_p,
remote_bfd_open): New functions.
(remote_hostio_send_command): Fail safely if remote connection
is not set up.
* solist.h (solib_open): Remove prototype.
(solib_bfd_open): Add prototype.
* solib.c: Include "remote.h".
(solib_open): Remove, replace by ...
(solib_bfd_open): ... this new function. Handle remote BFDs.
(solib_map_sections): Replace solib_open by solib_bfd_open.
* solib-frv.c: Include "exceptions.h".
(enable_break2): Replace solib_open by solib_bfd_open.
* solib-svr4.c: Include "exceptions.h".
(enable_break): Replace solib_open by solib_bfd_open.
* symfile.c: Include "remote.h".
(build_id_verify): Handle remote BFDs.
(separate_debug_file_exists): Use BFD to access file. Handle
remote BFDs.
(symfile_bfd_open): Handle remote BFDs.
(reread_symbols): Handle remote BFDs.
* NEWS: Mention "remote:" argument prefix to "set sysroot".
doc/ChangeLog:
* gdb.texinfo (Commands to Specify Files): Document "remote:"
argument prefix to "set sysroot".
Ulrich Weigand [Tue, 26 Aug 2008 17:21:29 +0000 (17:21 +0000)]
* gdbarch.sh (target_gdbarch): New global variable.
(deprecated_current_gdbarch_select_hack): Set it.
* gdbarch.c, gdbarch.h: Regenerate.
* arch-utils.c (gdbarch_update_p): Use target_gdbarch instead
of current_gdbarch.
* target-descriptions.c (target_find_description): Likewise.
* arm-tdep.c (arm_update_current_architecture): Likewise.
(show_fp_model, arm_show_abi, arm_show_fallback_mode,
arm_show_force_mode): Likewise.
* mips-tdep.c (show_mask_address, show_mipsfpu_command,
show_mips_abi): Likewise.
* mep-tdep.c (me_module_register_set, current_me_module): Likewise.
* target.c (target_translate_tls_address): Use target_gdbarch
instead of current_gdbarch.
* remote.c (struct packet_reg): Likewise.
(get_remote_arch_state, packet_reg_from_regnum,
packet_reg_from_pnum, remote_check_symbols, remote_wait,
remote_address_masked, remote_insert_breakpoint,
remote_insert_hw_breakpoint, remote_read_description): Likewise.
* remote-m32r-sdi.c (m32r_resume, m32r_wait): Likewise.
* remote-mips.c (mips_open, mips_common_breakpoint): Likewise.
* cris-tdep.c (cris_can_use_hardware_watchpoint): Likewise.
* solib.c (solib_open, solib_map_sections, solib_read_symbols,
solib_add, info_sharedlibrary_command, solib_address,
solib_create_inferior_hook, in_solib_dynsym_resolve_code,
solib_global_lookup): Likewise.
* solib-frv.c (enable_break2, frv_relocate_main_executable): Likewise.
* solib-irix.c (irix_current_sos, irix_open_symbol_file_object):
Likewise.
* solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
* solib-svr4.c (exec_entry_point, enable_break, svr4_free_so,
set_solib_svr4_fetch_link_map_offsets, svr4_fetch_link_map_offsets):
Likewise.
* nto-tdep.c (nto_find_and_open_solib, nto_init_solib_absolute_prefix,
nto_truncate_ptr): Likewise.
* mips-linux-tdep.c (mips_linux_in_dynsym_stub): Likewise.
Mark Mitchell [Tue, 26 Aug 2008 16:02:59 +0000 (16:02 +0000)]
* c-arm.texi: Add tutorial on ARM unwinding pseudo ops.
Luis Machado [Tue, 26 Aug 2008 15:16:41 +0000 (15:16 +0000)]
* ppc-linux-tdep.c (ppc_linux_vsx_regset_sections) New structure.
(ppc_linux_vmx_regset_sections): New structure.
(ppc_linux_fp_regset_sections): New structure.
(ppc_linux_init_abi): Select core-file regset based on target
features.
Nick Clifton [Tue, 26 Aug 2008 14:40:18 +0000 (14:40 +0000)]
* elf32-arm.c: Fix up comment describing Thumb to ARM interworking
stub.
Ulrich Weigand [Tue, 26 Aug 2008 12:42:00 +0000 (12:42 +0000)]
* target.c (debug_print_register): Use regcache_raw_collect
instead of regcache_cooked_read. Only handle raw registers.
Nick Clifton [Tue, 26 Aug 2008 11:46:41 +0000 (11:46 +0000)]
bfd/
* elf32-arm.c (arm_thumb_arm_v4t_short_branch_stub): Define.
(elf32_arm_stub_type): Add arm_thumb_arm_v4t_stub_short_branch.
(arm_type_of_stub): Handle armv4t short branches. Update
prototype.
(arm_stub_is_thumb): Handle arm_thumb_arm_v4t_stub_short_branch.
(arm_build_one_stub): Likewise.
(arm_size_one_stub): Likewise.
(elf32_arm_size_stubs): Use new arm_type_of_stub prototype.
(arm_map_one_stub): Handle arm_thumb_arm_v4t_stub_short_branch.
ld/testsuite/
* ld-arm/arm-elf.exp: Add farcall-thumb-arm-short test.
* ld-arm/farcall-group2.s: Fix comment.
* ld-arm/farcall-thumb-arm-short.d: New test.
* ld-arm/farcall-thumb-arm-short.s: New test.
Nick Clifton [Tue, 26 Aug 2008 11:11:17 +0000 (11:11 +0000)]
PR 6727
* emultempl/armelf.em (arm_elf_set_bfd_for_interworking): Scan all
input sections in all input bfds and always select the last
suitable one, so that interworking stubs are always processed
after all other input sections.
(arm_elf_before_allocation): Remove redundant use of
output_has_begun flag.
Jie Zhang [Tue, 26 Aug 2008 10:03:24 +0000 (10:03 +0000)]
* config/bfin-parse.y (check_macfunc_option): Fix instruction
mode checking.
(asm_1): Check mode for 16-bit multiply instructions.
testsuite/
* gas/bfin/arith_mode.d: New test.
* gas/bfin/arith_mode.s: New test.
* gas/bfin/invalid_arith_mode.l: New test.
* gas/bfin/invalid_arith_mode.s: New test.
* gas/bfin/bfin.exp: Add arith_mode and invalid_arith_mode.
gdbadmin [Tue, 26 Aug 2008 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Tue, 26 Aug 2008 00:00:05 +0000 (00:00 +0000)]
daily update
Pedro Alves [Mon, 25 Aug 2008 21:50:25 +0000 (21:50 +0000)]
* cp-name-parser.y: Include config.h before system headers.
Ulrich Weigand [Mon, 25 Aug 2008 21:03:29 +0000 (21:03 +0000)]
* m88k-tdep.c: Update for unwinder changes.
DJ Delorie [Mon, 25 Aug 2008 17:26:06 +0000 (17:26 +0000)]
Merge from gcc:
2008-08-16 Nicolas Roche <roche@adacore.com>
* Makefile.tpl: Add BOOT_ADAFLAGS.
* Makefile.in: Regenerate.
DJ Delorie [Mon, 25 Aug 2008 17:07:33 +0000 (17:07 +0000)]
Merge from gcc.
Alan Modra [Mon, 25 Aug 2008 04:38:45 +0000 (04:38 +0000)]
* gmon_io.h: Don't include sysdep.h here.
(O_BINARY, SET_BINARY): Don't define here.
* gmon_io.c: Include "binary-io.h".
(gmon_out_read): Remove #ifdef SET_BINARY.
* Makefile.am: Run "make dep-am"
* Makefile.in: Regenerate.
Alan Modra [Mon, 25 Aug 2008 04:38:13 +0000 (04:38 +0000)]
* sysdep.h: Include "binary-io.h".
(O_BINARY): Don't define here.
* bin2c.c (O_BINARY, O_TEXT, SET_BINARY): Don't define here.
* strings.c: Likewise.
(main): Remove #ifdef SET_BINARY.
* Makefile.am: Run "make dep-am"
* Makefile.in: Regenerate.
Alan Modra [Mon, 25 Aug 2008 04:36:03 +0000 (04:36 +0000)]
* binary-io.h: New file, imported from gnulib, but don't
#include <fcntl.h> or <stdio.h>.
gdbadmin [Mon, 25 Aug 2008 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Mon, 25 Aug 2008 00:00:05 +0000 (00:00 +0000)]
daily update
Andreas Schwab [Sun, 24 Aug 2008 21:43:00 +0000 (21:43 +0000)]
(_bfd_elf_write_section_eh_frame): Do proper
extension when calculating difference of offsets.
Tom Tromey [Sun, 24 Aug 2008 20:33:33 +0000 (20:33 +0000)]
* s390-tdep.c (s390_address_class_type_flags): Use
TYPE_INSTANCE_FLAG_ADDRESS_CLASS_1.
(s390_address_class_type_flags_to_name): Likewise.
(s390_address_class_name_to_type_flags): Likewise.
Maciej W. Rozycki [Sun, 24 Aug 2008 18:40:37 +0000 (18:40 +0000)]
* Makefile.in (uninstall): Apply $(EXEEXT) too.
Tom Tromey [Sun, 24 Aug 2008 18:01:15 +0000 (18:01 +0000)]
* rs6000-tdep.c (rs6000_builtin_type_vec128): Don't use
TYPE_FLAGS.
* features/rs6000/powerpc-vsx32l.c
(initialize_tdesc_powerpc_vsx32l): Update.
* features/rs6000/powerpc-vsx32.c
(initialize_tdesc_powerpc_vsx32): Update.
* features/rs6000/powerpc-vsx64.c
(initialize_tdesc_powerpc_vsx64): Update.
* features/rs6000/powerpc-vsx64l.c
(initialize_tdesc_powerpc_vsx64l): Update.
* target-descriptions.c (maint_print_c_tdesc_cmd): Emit
TYPE_VECTOR, not TYPE_FLAGS.
Tom Tromey [Sun, 24 Aug 2008 16:39:57 +0000 (16:39 +0000)]
gdb:
* xml-tdesc.c (tdesc_end_union): Update.
* stabsread.c (define_symbol): Update.
(read_type): Update.
(read_struct_type): Update.
(read_enum_type): Update.
* spu-tdep.c (spu_builtin_type_vec128): Update.
* sh-tdep.c (sh_push_dummy_call_fpu): Update.
(sh_push_dummy_call_nofpu): Update.
* mdebugread.c (parse_symbol): Update.
(parse_symbol): Update.
(parse_symbol): Update.
(upgrade_type): Update.
* jv-lang.c (java_lookup_class): Update.
* iq2000-tdep.c (iq2000_pointer_to_address): Update.
* i386-tdep.c (i386_mmx_type): Update.
(i386_sse_type): Update.
* gdbtypes.h (enum type_flag_value): New enum.
(enum type_instance_flag_value): New enum.
(TYPE_FLAG_UNSIGNED, TYPE_FLAG_NOSIGN, TYPE_FLAG_STUB,
TYPE_FLAG_TARGET_STUB, TYPE_FLAG_STATIC, TYPE_FLAG_PROTOTYPED,
TYPE_FLAG_INCOMPLETE, TYPE_FLAG_VARARGS, TYPE_FLAG_VECTOR,
TYPE_FLAG_FIXED_INSTANCE, TYPE_FLAG_STUB_SUPPORTED,
TYPE_FLAG_NOTTEXT): Now enum constants.
(TYPE_FLAG_CONST, TYPE_FLAG_VOLATILE, TYPE_FLAG_CODE_SPACE,
TYPE_FLAG_DATA_SPACE, TYPE_FLAG_ADDRESS_CLASS_1,
TYPE_FLAG_ADDRESS_CLASS_2): Remove.
(TYPE_INSTANCE_FLAG_CONST, TYPE_INSTANCE_FLAG_VOLATILE,
TYPE_INSTANCE_FLAG_CODE_SPACE, TYPE_INSTANCE_FLAG_DATA_SPACE,
TYPE_INSTANCE_FLAG_ADDRESS_CLASS_1,
TYPE_INSTANCE_FLAG_ADDRESS_CLASS_2): New constants.
(TYPE_UNSIGNED, TYPE_NOSIGN, TYPE_STUB, TYPE_TARGET_STUB,
TYPE_STATIC, TYPE_PROTOTYPED, TYPE_INCOMPLETE, TYPE_VARARGS,
TYPE_VECTOR, TYPE_FIXED_INSTANCE, TYPE_STUB_SUPPORTED,
TYPE_NOTTEXT): Update.
(TYPE_FLAG_ADDRESS_CLASS_ALL): Remove.
(TYPE_INSTANCE_FLAG_ADDRESS_CLASS_ALL): New define.
(TYPE_VOLATILE, TYPE_CODE_SPACE, TYPE_DATA_SPACE,
TYPE_ADDRESS_CLASS_1, TYPE_ADDRESS_CLASS_2,
TYPE_ADDRESS_CLASS_ALL): Update.
(struct main_type) <flags>: Remove.
<flag_unsigned, flag_nosign, flag_stub, flag_target_stub,
flag_static, flag_prototyped, flag_incomplete, flag_varargs,
flag_vector, flag_stub_supported, flag_nottext,
flag_fixed_instance>: New fields.
<nfields, vptr_fieldno>: Move earlier.
(TYPE_FLAGS): Remove.
* gdbtypes.c (make_pointer_type): Update.
(address_space_name_to_int): Update.
(address_space_int_to_name): Update.
(make_type_with_address_space): Update.
(make_cv_type): Update.
(create_range_type): Update.
(get_discrete_bounds): Update.
(create_set_type): Update.
(make_vector_type): Update.
(smash_to_method_type): Update.
(check_typedef): Update.
(check_stub_method): Update.
(init_type): Individually assign flag fields.
(recursive_dump_type): Don't print entire TYPE_FLAGS field. Do
print TYPE_FIXED_INSTANCE, TYPE_STUB_SUPPORTED, and TYPE_NOTTEXT.
(copy_type_recursive): Copy the entire main type. Don't use
TYPE_FLAGS.
* features/rs6000/powerpc-altivec64l.c
(initialize_tdesc_powerpc_altivec64l): Update.
* features/rs6000/powerpc-altivec64.c
(initialize_tdesc_powerpc_altivec64): Update.
* features/rs6000/powerpc-altivec32l.c
(initialize_tdesc_powerpc_altivec32l): Update.
* features/rs6000/powerpc-altivec32.c
(initialize_tdesc_powerpc_altivec32): Update.
* features/rs6000/powerpc-7400.c (initialize_tdesc_powerpc_7400):
Update.
* features/arm-with-iwmmxt.c (initialize_tdesc_arm_with_iwmmxt):
Update.
* dwarf2read.c (read_structure_type): Update.
(read_enumeration_type): Likewise.
(process_enumeration_scope): Likewise.
(read_tag_pointer_type): Likewise.
(read_subroutine_type): Likewise.
(read_subroutine_type): Likewise.
(read_base_type): Likewise.
* coffread.c (coff_read_enum_type): Update.
* ada-valprint.c (adjust_type_signedness): Update.
* ada-typeprint.c (print_record_field_types): Update.
* ada-lang.c (packed_array_type): Update.
(empty_record): Don't reset TYPE_FLAGS.
(ada_template_to_fixed_record_type_1): Update.
(ada_template_to_fixed_record_type_1): Likewise.
(template_to_static_fixed_type): Likewise.
(to_record_with_fixed_variant_part): Likewise.
(to_fixed_record_type): Likewise.
(to_fixed_array_type): Likewise.
(to_static_fixed_type): Likewise.
gdb/testsuite:
* gdb.base/maint.exp: Update "maint print type".
Alan Modra [Sun, 24 Aug 2008 03:57:28 +0000 (03:57 +0000)]
* Makefile.am (chew.o): Delete rule.
($(MKDOC)): Move options before C file.
* Makefile.in: Regenerate.
Alan Modra [Sun, 24 Aug 2008 03:13:05 +0000 (03:13 +0000)]
Update a number of obsolete autoconf macros.
Alan Modra [Sun, 24 Aug 2008 00:00:06 +0000 (00:00 +0000)]
daily update
projects / external / binutils.git / log