review.tizen.org Git - platform/kernel/linux-starfive.git/log

Merge tag 'riscv-for-linus-5.13-rc7' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

- A build fix to always build modules with the 'medany' code model, as
   the module loader doesn't support 'medlow'.

- A Kconfig warning fix for the SiFive errata.

- A pair of fixes that for regressions to the recent memory layout
   changes.

- A fix for the FU740 device tree.

* tag 'riscv-for-linus-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: dts: fu740: fix cache-controller interrupts
  riscv: Ensure BPF_JIT_REGION_START aligned with PMD size
  riscv: kasan: Fix MODULES_VADDR evaluation due to local variables' name
  riscv: sifive: fix Kconfig errata warning
  riscv32: Use medany C model for modules

Merge tag 's390-5.13-4' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Vasily Gorbik:

- Fix zcrypt ioctl hang due to AP queue msg counter dropping below 0
   when pending requests are purged.

- Two fixes for the machine check handler in the entry code.

* tag 's390-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ap: Fix hanging ioctl caused by wrong msg counter
  s390/mcck: fix invalid KVM guest condition check
  s390/mcck: fix calculation of SIE critical section size

riscv: dts: fu740: fix cache-controller interrupts

The order of interrupt numbers is incorrect.

The order for FU740 is: DirError, DataError, DataFail, DirFail

From SiFive FU740-C000 Manual:
19 - L2 Cache DirError
20 - L2 Cache DirFail
21 - L2 Cache DataError
22 - L2 Cache DataFail

Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

riscv: Ensure BPF_JIT_REGION_START aligned with PMD size

Andreas reported commit fc8504765ec5 ("riscv: bpf: Avoid breaking W^X")
breaks booting with one kind of defconfig, I reproduced a kernel panic
with the defconfig:

[    0.138553] Unable to handle kernel paging request at virtual address ffffffff81201220
[    0.139159] Oops [#1]
[    0.139303] Modules linked in:
[    0.139601] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc5-default+ #1
[    0.139934] Hardware name: riscv-virtio,qemu (DT)
[    0.140193] epc : __memset+0xc4/0xfc
[    0.140416]  ra : skb_flow_dissector_init+0x1e/0x82
[    0.140609] epc : ffffffff8029806c ra : ffffffff8033be78 sp : ffffffe001647da0
[    0.140878]  gp : ffffffff81134b08 tp : ffffffe001654380 t0 : ffffffff81201158
[    0.141156]  t1 : 0000000000000002 t2 : 0000000000000154 s0 : ffffffe001647dd0
[    0.141424]  s1 : ffffffff80a43250 a0 : ffffffff81201220 a1 : 0000000000000000
[    0.141654]  a2 : 000000000000003c a3 : ffffffff81201258 a4 : 0000000000000064
[    0.141893]  a5 : ffffffff8029806c a6 : 0000000000000040 a7 : ffffffffffffffff
[    0.142126]  s2 : ffffffff81201220 s3 : 0000000000000009 s4 : ffffffff81135088
[    0.142353]  s5 : ffffffff81135038 s6 : ffffffff8080ce80 s7 : ffffffff80800438
[    0.142584]  s8 : ffffffff80bc6578 s9 : 0000000000000008 s10: ffffffff806000ac
[    0.142810]  s11: 0000000000000000 t3 : fffffffffffffffc t4 : 0000000000000000
[    0.143042]  t5 : 0000000000000155 t6 : 00000000000003ff
[    0.143220] status: 0000000000000120 badaddr: ffffffff81201220 cause: 000000000000000f
[    0.143560] [<ffffffff8029806c>] __memset+0xc4/0xfc
[    0.143859] [<ffffffff8061e984>] init_default_flow_dissectors+0x22/0x60
[    0.144092] [<ffffffff800010fc>] do_one_initcall+0x3e/0x168
[    0.144278] [<ffffffff80600df0>] kernel_init_freeable+0x1c8/0x224
[    0.144479] [<ffffffff804868a8>] kernel_init+0x12/0x110
[    0.144658] [<ffffffff800022de>] ret_from_exception+0x0/0xc
[    0.145124] ---[ end trace f1e9643daa46d591 ]---

After some investigation, I think I found the root cause: commit
2bfc6cd81bd ("move kernel mapping outside of linear mapping") moves
BPF JIT region after the kernel:

| #define BPF_JIT_REGION_START PFN_ALIGN((unsigned long)&_end)

The &_end is unlikely aligned with PMD size, so the front bpf jit
region sits with part of kernel .data section in one PMD size mapping.
But kernel is mapped in PMD SIZE, when bpf_jit_binary_lock_ro() is
called to make the first bpf jit prog ROX, we will make part of kernel
.data section RO too, so when we write to, for example memset the
.data section, MMU will trigger a store page fault.

To fix the issue, we need to ensure the BPF JIT region is PMD size
aligned. This patch acchieve this goal by restoring the BPF JIT region
to original position, I.E the 128MB before kernel .text section. The
modification to kasan_init.c is inspired by Alexandre.

Fixes: fc8504765ec5 ("riscv: bpf: Avoid breaking W^X")
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

riscv: kasan: Fix MODULES_VADDR evaluation due to local variables' name

commit 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear
mapping") makes use of MODULES_VADDR to populate kernel, BPF, modules
mapping. Currently, MODULES_VADDR is defined as below for RV64:

| #define MODULES_VADDR (PFN_ALIGN((unsigned long)&_end) - SZ_2G)

But kasan_init() has two local variables which are also named as _start,
_end, so MODULES_VADDR is evaluated with the local variable _end
rather than the global "_end" as we expected. Fix this issue by
renaming the two local variables.

Fixes: 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Merge tag 'net-5.13-rc7' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc7, including fixes from wireless, bpf,
  bluetooth, netfilter and can.

  Current release - regressions:

   - mlxsw: spectrum_qdisc: Pass handle, not band number to find_class()
     to fix modifying offloaded qdiscs

   - lantiq: net: fix duplicated skb in rx descriptor ring

   - rtnetlink: fix regression in bridge VLAN configuration, empty info
     is not an error, bot-generated "fix" was not needed

   - libbpf: s/rx/tx/ typo on umem->rx_ring_setup_done to fix umem
     creation

  Current release - new code bugs:

   - ethtool: fix NULL pointer dereference during module EEPROM dump via
     the new netlink API

   - mlx5e: don't update netdev RQs with PTP-RQ, the special purpose
     queue should not be visible to the stack

   - mlx5e: select special PTP queue only for SKBTX_HW_TSTAMP skbs

   - mlx5e: verify dev is present in get devlink port ndo, avoid a panic

  Previous releases - regressions:

   - neighbour: allow NUD_NOARP entries to be force GCed

   - further fixes for fallout from reorg of WiFi locking (staging:
     rtl8723bs, mac80211, cfg80211)

   - skbuff: fix incorrect msg_zerocopy copy notifications

   - mac80211: fix NULL ptr deref for injected rate info

   - Revert "net/mlx5: Arm only EQs with EQEs" it may cause missed IRQs

  Previous releases - always broken:

   - bpf: more speculative execution fixes

   - netfilter: nft_fib_ipv6: skip ipv6 packets from any to link-local

   - udp: fix race between close() and udp_abort() resulting in a panic

   - fix out of bounds when parsing TCP options before packets are
     validated (in netfilter: synproxy, tc: sch_cake and mptcp)

   - mptcp: improve operation under memory pressure, add missing
     wake-ups

   - mptcp: fix double-lock/soft lookup in subflow_error_report()

   - bridge: fix races (null pointer deref and UAF) in vlan tunnel
     egress

   - ena: fix DMA mapping function issues in XDP

   - rds: fix memory leak in rds_recvmsg

  Misc:

   - vrf: allow larger MTUs

   - icmp: don't send out ICMP messages with a source address of 0.0.0.0

   - cdc_ncm: switch to eth%d interface naming"

* tag 'net-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (139 commits)
  net: ethernet: fix potential use-after-free in ec_bhf_remove
  selftests/net: Add icmp.sh for testing ICMP dummy address responses
  icmp: don't send out ICMP messages with a source address of 0.0.0.0
  net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY
  net: ll_temac: Fix TX BD buffer overwrite
  net: ll_temac: Add memory-barriers for TX BD access
  net: ll_temac: Make sure to free skb when it is completely used
  MAINTAINERS: add Guvenc as SMC maintainer
  bnxt_en: Call bnxt_ethtool_free() in bnxt_init_one() error path
  bnxt_en: Fix TQM fastpath ring backing store computation
  bnxt_en: Rediscover PHY capabilities after firmware reset
  cxgb4: fix wrong shift.
  mac80211: handle various extensible elements correctly
  mac80211: reset profile_periodicity/ema_ap
  cfg80211: avoid double free of PMSR request
  cfg80211: make certificate generation more robust
  mac80211: minstrel_ht: fix sample time check
  net: qed: Fix memcpy() overflow of qed_dcbx_params()
  net: cdc_eem: fix tx fixup skb leak
  net: hamradio: fix memory leak in mkiss_close
  ...

Merge tag 'for-5.13-rc6-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fix from David Sterba:
"One more fix, for a space accounting bug in zoned mode. It happens
  when a block group is switched back rw->ro and unusable bytes (due to
  zoned constraints) are subtracted twice.

  It has user visible effects so I consider it important enough for late
  -rc inclusion and backport to stable"

* tag 'for-5.13-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zoned: fix negative space_info->bytes_readonly

Merge tag 'pci-v5.13-fixes-2' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:

- Clear 64-bit flag for host bridge windows below 4GB to fix a resource
   allocation regression added in -rc1 (Punit Agrawal)

- Fix tegra194 MCFG quirk build regressions added in -rc1 (Jon Hunter)

- Avoid secondary bus resets on TI KeyStone C667X devices (Antti
   Järvinen)

- Avoid secondary bus resets on some NVIDIA GPUs (Shanker Donthineni)

- Work around FLR erratum on Huawei Intelligent NIC VF (Chiqijun)

- Avoid broken ATS on AMD Navi14 GPU (Evan Quan)

- Trust Broadcom BCM57414 NIC to isolate functions even though it
   doesn't advertise ACS support (Sriharsha Basavapatna)

- Work around AMD RS690 BIOSes that don't configure DMA above 4GB
   (Mikel Rychliski)

- Fix panic during PIO transfer on Aardvark controller (Pali Rohár)

* tag 'pci-v5.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: aardvark: Fix kernel panic during PIO transfer
  PCI: Add AMD RS690 quirk to enable 64-bit DMA
  PCI: Add ACS quirk for Broadcom BCM57414 NIC
  PCI: Mark AMD Navi14 GPU ATS as broken
  PCI: Work around Huawei Intelligent NIC VF FLR erratum
  PCI: Mark some NVIDIA GPUs to avoid bus reset
  PCI: Mark TI C667X to avoid bus reset
  PCI: tegra194: Fix MCFG quirk build regressions
  PCI: of: Clear 64-bit flag for non-prefetchable memory below 4GB

afs: Re-enable freezing once a page fault is interrupted

If a task is killed during a page fault, it does not currently call
sb_end_pagefault(), which means that the filesystem cannot be frozen
at any time thereafter. This may be reported by lockdep like this:

====================================
WARNING: fsstress/10757 still has locks held!
5.13.0-rc4-build4+ #91 Not tainted
------------------------------------
1 lock held by fsstress/10757:
#0: ffff888104eac530
(
sb_pagefaults

as filesystem freezing is modelled as a lock.

Fix this by removing all the direct returns from within the function,
and using 'ret' to indicate whether we were interrupted or successful.

Fixes: 1cf7a1518aef ("afs: Implement shared-writeable mmap")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20210616154900.1958373-1-willy@infradead.org/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

net: ethernet: fix potential use-after-free in ec_bhf_remove

static void ec_bhf_remove(struct pci_dev *dev)
{
...
struct ec_bhf_priv *priv = netdev_priv(net_dev);

unregister_netdev(net_dev);
free_netdev(net_dev);

pci_iounmap(dev, priv->dma_io);
pci_iounmap(dev, priv->io);
...
}

priv is netdev private data, but it is used
after free_netdev(). It can cause use-after-free when accessing priv
pointer. So, fix it by moving free_netdev() after pci_iounmap()
calls.

Fixes: 6af55ff52b02 ("Driver for Beckhoff CX5020 EtherCAT master module.")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-net-2021-06-18' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
A couple of straggler fixes:
* a minstrel HT sample check fix
* peer measurement could double-free on races
* certificate file generation at build time could
   sometimes hang
* some parameters weren't reset between connections
   in mac80211
* some extensible elements were treated as non-
   extensible, possibly causuing bad connections
   (or failures) if the AP adds data
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/net: Add icmp.sh for testing ICMP dummy address responses

This adds a new icmp.sh selftest for testing that the kernel will respond
correctly with an ICMP unreachable message with the dummy (192.0.0.8)
source address when there are no IPv4 addresses configured to use as source
addresses.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

icmp: don't send out ICMP messages with a source address of 0.0.0.0

When constructing ICMP response messages, the kernel will try to pick a
suitable source address for the outgoing packet. However, if no IPv4
addresses are configured on the system at all, this will fail and we end up
producing an ICMP message with a source address of 0.0.0.0. This can happen
on a box routing IPv4 traffic via v6 nexthops, for instance.

Since 0.0.0.0 is not generally routable on the internet, there's a good
chance that such ICMP messages will never make it back to the sender of the
original packet that the ICMP message was sent in response to. This, in
turn, can create connectivity and PMTUd problems for senders. Fortunately,
RFC7600 reserves a dummy address to be used as a source for ICMP
messages (192.0.0.8/32), so let's teach the kernel to substitute that
address as a last resort if the regular source address selection procedure
fails.

Below is a quick example reproducing this issue with network namespaces:

ip netns add ns0
ip l add type veth peer netns ns0
ip l set dev veth0 up
ip a add 10.0.0.1/24 dev veth0
ip a add fc00:dead:cafe:42::1/64 dev veth0
ip r add 10.1.0.0/24 via inet6 fc00:dead:cafe:42::2
ip -n ns0 l set dev veth0 up
ip -n ns0 a add fc00:dead:cafe:42::2/64 dev veth0
ip -n ns0 r add 10.0.0.0/24 via inet6 fc00:dead:cafe:42::1
ip netns exec ns0 sysctl -w net.ipv4.icmp_ratelimit=0
ip netns exec ns0 sysctl -w net.ipv4.ip_forward=1
tcpdump -tpni veth0 -c 2 icmp &
ping -w 1 10.1.0.1 > /dev/null
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on veth0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 29, seq 1, length 64
IP 0.0.0.0 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92
2 packets captured
2 packets received by filter
0 packets dropped by kernel

With this patch the above capture changes to:
IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 31127, seq 1, length 64
IP 192.0.0.8 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Juliusz Chroboczek <jch@irif.fr>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY

As documented in Documentation/networking/driver.rst, the ndo_start_xmit
method must not return NETDEV_TX_BUSY under any normal circumstances, and
as recommended, we simply stop the tx queue in advance, when there is a
risk that the next xmit would cause a NETDEV_TX_BUSY return.

Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ll_temac: Fix TX BD buffer overwrite

Just as the initial check, we need to ensure num_frag+1 buffers available,
as that is the number of buffers we are going to use.

This fixes a buffer overflow, which might be seen during heavy network
load. Complete lockup of TEMAC was reproducible within about 10 minutes of
a particular load.

Fixes: 84823ff80f74 ("net: ll_temac: Fix race condition causing TX hang")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ll_temac: Add memory-barriers for TX BD access

Add a couple of memory-barriers to ensure correct ordering of read/write
access to TX BDs.

In xmit_done, we should ensure that reading the additional BD fields are
only done after STS_CTRL_APP0_CMPLT bit is set.

When xmit_done marks the BD as free by setting APP0=0, we need to ensure
that the other BD fields are reset first, so we avoid racing with the xmit
path, which writes to the same fields.

Finally, making sure to read APP0 of next BD after the current BD, ensures
that we see all available buffers.

Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ll_temac: Make sure to free skb when it is completely used

With the skb pointer piggy-backed on the TX BD, we have a simple and
efficient way to free the skb buffer when the frame has been transmitted.
But in order to avoid freeing the skb while there are still fragments from
the skb in use, we need to piggy-back on the TX BD of the skb, not the
first.

Without this, we are doing use-after-free on the DMA side, when the first
BD of a multi TX BD packet is seen as completed in xmit_done, and the
remaining BDs are still being processed.

Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: add Guvenc as SMC maintainer

Add Guvenc as maintainer for Shared Memory Communications (SMC)
Sockets.

Cc: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'bnxt_en-fixes'

Michael Chan says:

====================
bnxt_en: Bug fixes

This patchset includes 3 small bug fixes to reinitialize PHY capabilities
after firmware reset, setup the chip's internal TQM fastpath ring
backing memory properly for RoCE traffic, and to free ethtool related
memory if driver probe fails.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Call bnxt_ethtool_free() in bnxt_init_one() error path

bnxt_ethtool_init() may have allocated some memory and we need to
call bnxt_ethtool_free() to properly unwind if bnxt_init_one()
fails.

Fixes: 7c3809181468 ("bnxt_en: Refactor bnxt_init_one() and turn on TPA support on 57500 chips.")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix TQM fastpath ring backing store computation

TQM fastpath ring needs to be sized to store both the requester
and responder side of RoCE QPs in TQM for supporting bi-directional
tests. Fix bnxt_alloc_ctx_mem() to multiply the RoCE QPs by a factor of
2 when computing the number of entries for TQM fastpath ring. This
fixes an RX pipeline stall issue when running bi-directional max
RoCE QP tests.

Fixes: c7dd7ab4b204 ("bnxt_en: Improve TQM ring context memory sizing formulas.")
Signed-off-by: Rukhsana Ansari <rukhsana.ansari@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Rediscover PHY capabilities after firmware reset

There is a missing bnxt_probe_phy() call in bnxt_fw_init_one() to
rediscover the PHY capabilities after a firmware reset. This can cause
some PHY related functionalities to fail after a firmware reset. For
example, in multi-host, the ability for any host to configure the PHY
settings may be lost after a firmware reset.

Fixes: ec5d31e3c15d ("bnxt_en: Handle firmware reset status during IF_UP.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4: fix wrong shift.

While fixing coverity warning, commit dd2c79677375 introduced typo in
shift value. Fix that.

Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Fixes: dd2c79677375 ("cxgb4: Fix unintentional sign extension issues")
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'arc-5.13-rc7-fixes' of git://git./linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:

- ARCv2 userspace ABI not populating a few registers

- Unbork CONFIG_HARDENED_USERCOPY for ARC

* tag 'arc-5.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: fix CONFIG_HARDENED_USERCOPY
ARCv2: save ABI registers across signal handling

Merge tag 'trace-v5.13-rc6' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:

- Have recordmcount check for valid st_shndx otherwise some archs may
   have invalid references for the mcount location.

- Two fixes done for mapping pids to task names. Traces were not
   showing the names of tasks when they should have.

- Fix to trace_clock_global() to prevent it from going backwards

* tag 'trace-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Do no increment trace_clock_global() by one
  tracing: Do not stop recording comms if the trace file is being read
  tracing: Do not stop recording cmdlines when tracing is off
  recordmcount: Correct st_shndx handling

Merge tag 'printk-for-5.13-fixup' of git://git./linux/kernel/git/printk/linux

Pull printk fixup from Petr Mladek:
"Fix misplaced EXPORT_SYMBOL(vsprintf)"

* tag 'printk-for-5.13-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Move EXPORT_SYMBOL() closer to vprintk definition

Merge tag 'pm-5.13-rc7' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fix from Rafael Wysocki:
"Remove recently added frequency invariance support from the CPPC
  cpufreq driver, because it has turned out to be problematic and it
  cannot be fixed properly on time for 5.13 (Viresh Kumar)"

* tag 'pm-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "cpufreq: CPPC: Add support for frequency invariance"

Merge tag 'usb-5.13-rc7' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are three small USB fixes for reported problems for 5.13-rc7.
  They include:

   - disable autosuspend for a cypress USB hub

   - fix the battery charger detection for the chipidea driver

   - fix a kernel panic in the dwc3 driver due to a previous change in
     5.13-rc1.

  All have been in linux-next with no reported problems"

* tag 'usb-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: core: hub: Disable autosuspend for Cypress CY7C65632
  usb: chipidea: imx: Fix Battery Charger 1.2 CDP detection
  usb: dwc3: core: fix kernel panic when do reboot

Merge tag 'drm-fixes-2021-06-18' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Not much happening in fixes land this week only one PR for two amdgpu
  powergating fixes was waiting for me, maybe something will show up
  over the weekend, maybe not.

  amdgpu:

   - GFX9 and 10 powergating fixes"

* tag 'drm-fixes-2021-06-18' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu/gfx10: enlarge CP_MEC_DOORBELL_RANGE_UPPER to cover full doorbell.
  drm/amdgpu/gfx9: fix the doorbell missing when in CGPG issue.

PCI: aardvark: Fix kernel panic during PIO transfer

Trying to start a new PIO transfer by writing value 0 in PIO_START register
when previous transfer has not yet completed (which is indicated by value 1
in PIO_START) causes an External Abort on CPU, which results in kernel
panic:

SError Interrupt on CPU0, code 0xbf000002 -- SError
Kernel panic - not syncing: Asynchronous SError Interrupt

To prevent kernel panic, it is required to reject a new PIO transfer when
previous one has not finished yet.

If previous PIO transfer is not finished yet, the kernel may issue a new
PIO request only if the previous PIO transfer timed out.

In the past the root cause of this issue was incorrectly identified (as it
often happens during link retraining or after link down event) and special
hack was implemented in Trusted Firmware to catch all SError events in EL3,
to ignore errors with code 0xbf000002 and not forwarding any other errors
to kernel and instead throw panic from EL3 Trusted Firmware handler.

Links to discussion and patches about this issue:
https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50
https://lore.kernel.org/linux-pci/20190316161243.29517-1-repk@triplefau.lt/
https://lore.kernel.org/linux-pci/971be151d24312cc533989a64bd454b4@www.loen.fr/
https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541

But the real cause was the fact that during link retraining or after link
down event the PIO transfer may take longer time, up to the 1.44s until it
times out. This increased probability that a new PIO transfer would be
issued by kernel while previous one has not finished yet.

After applying this change into the kernel, it is possible to revert the
mentioned TF-A hack and SError events do not have to be caught in TF-A EL3.

Link: https://lore.kernel.org/r/20210608203655.31228-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org # 7fbcb5da811b ("PCI: aardvark: Don't rely on jiffies while holding spinlock")

PCI: Add AMD RS690 quirk to enable 64-bit DMA

Although the AMD RS690 chipset has 64-bit DMA support, BIOS implementations
sometimes fail to configure the memory limit registers correctly.

The Acer F690GVM mainboard uses this chipset and a Marvell 88E8056 NIC. The
sky2 driver programs the NIC to use 64-bit DMA, which will not work:

  sky2 0000:02:00.0: error interrupt status=0x8
  sky2 0000:02:00.0 eth0: tx timeout
  sky2 0000:02:00.0 eth0: transmit ring 0 .. 22 report=0 done=0

Other drivers required by this mainboard either don't support 64-bit DMA,
or have it disabled using driver specific quirks. For example, the ahci
driver has quirks to enable or disable 64-bit DMA depending on the BIOS
version (see ahci_sb600_enable_64bit() in ahci.c). This ahci quirk matches
against the SB600 SATA controller, but the real issue is almost certainly
with the RS690 PCI host that it was commonly attached to.

To avoid this issue in all drivers with 64-bit DMA support, fix the
configuration of the PCI host. If the kernel is aware of physical memory
above 4GB, but the BIOS never configured the PCI host with this
information, update the registers with our values.

[bhelgaas: drop PCI_DEVICE_ID_ATI_RS690 definition]
Link: https://lore.kernel.org/r/20210611214823.4898-1-mikel@mikelr.com
Signed-off-by: Mikel Rychliski <mikel@mikelr.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

PCI: Add ACS quirk for Broadcom BCM57414 NIC

The Broadcom BCM57414 NIC may be a multi-function device. While it does
not advertise an ACS capability, peer-to-peer transactions are not possible
between the individual functions, so it is safe to treat them as fully
isolated.

Add an ACS quirk for this device so the functions can be in independent
IOMMU groups and attached individually to userspace applications using
VFIO.

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/1621645997-16251-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org

PCI: Mark AMD Navi14 GPU ATS as broken

Observed unexpected GPU hang during runpm stress test on 0x7341 rev 0x00.
Further debugging shows broken ATS is related.

Disable ATS on this part.  Similar issues on other devices:

  a2da5d8cc0b0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms")
  45beb31d3afb ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken")
  5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken")

Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20210602021255.939090-1-evan.quan@amd.com
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Cc: stable@vger.kernel.org

PCI: Work around Huawei Intelligent NIC VF FLR erratum

pcie_flr() starts a Function Level Reset (FLR), waits 100ms (the maximum
time allowed for FLR completion by PCIe r5.0, sec 6.6.2), and waits for the
FLR to complete.  It assumes the FLR is complete when a config read returns
valid data.

When we do an FLR on several Huawei Intelligent NIC VFs at the same time,
firmware on the NIC processes them serially.  The VF may respond to config
reads before the firmware has completed its reset processing.  If we bind a
driver to the VF (e.g., by assigning the VF to a virtual machine) in the
interval between the successful config read and completion of the firmware
reset processing, the NIC VF driver may fail to load.

Prevent this driver failure by waiting for the NIC firmware to complete its
reset processing.  Not all NIC firmware supports this feature.

[bhelgaas: commit log]
Link: https://support.huawei.com/enterprise/en/doc/EDOC1100063073/87950645/vm-oss-occasionally-fail-to-load-the-in200-driver-when-the-vf-performs-flr
Link: https://lore.kernel.org/r/20210414132301.1793-1-chiqijun@huawei.com
Signed-off-by: Chiqijun <chiqijun@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org

PCI: Mark some NVIDIA GPUs to avoid bus reset

Some NVIDIA GPU devices do not work with SBR. Triggering SBR leaves the
device inoperable for the current system boot. It requires a system
hard-reboot to get the GPU device back to normal operating condition
post-SBR. For the affected devices, enable NO_BUS_RESET quirk to avoid the
issue.

This issue will be fixed in the next generation of hardware.

Link: https://lore.kernel.org/r/20210608054857.18963-8-ameynarkhede03@gmail.com
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Cc: stable@vger.kernel.org

PCI: Mark TI C667X to avoid bus reset

Some TI KeyStone C667X devices do not support bus/hot reset. The PCIESS
automatically disables LTSSM when Secondary Bus Reset is received and
device stops working. Prevent bus reset for these devices. With this
change, the device can be assigned to VMs with VFIO, but it will leak state
between VMs.

Reference: https://e2e.ti.com/support/processors/f/791/t/954382
Link: https://lore.kernel.org/r/20210315102606.17153-1-antti.jarvinen@gmail.com
Signed-off-by: Antti Järvinen <antti.jarvinen@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Cc: stable@vger.kernel.org

PCI: tegra194: Fix MCFG quirk build regressions

7f100744749e ("PCI: tegra: Add Tegra194 MCFG quirks for ECAM errata")
caused a few build regressions:

  - 7f100744749e removed the Makefile rule for CONFIG_PCIE_TEGRA194, so
    pcie-tegra.c can no longer be built as a module.  Restore that rule.

  - 7f100744749e added "#ifdef CONFIG_PCIE_TEGRA194" around the native
    driver, but that's only set when the driver is built-in (for a module,
    CONFIG_PCIE_TEGRA194_MODULE is defined).

    The ACPI quirk is completely independent of the rest of the native
    driver, so move the quirk to its own file and remove the #ifdef in the
    native driver.

  - 7f100744749e added symbols that are always defined but used only when
    CONFIG_PCIEASPM, which causes warnings when CONFIG_PCIEASPM is not set:

      drivers/pci/controller/dwc/pcie-tegra194.c:259:18: warning: ‘event_cntr_data_offset’ defined but not used [-Wunused-const-variable=]
      drivers/pci/controller/dwc/pcie-tegra194.c:250:18: warning: ‘event_cntr_ctrl_offset’ defined but not used [-Wunused-const-variable=]
      drivers/pci/controller/dwc/pcie-tegra194.c:243:27: warning: ‘pcie_gen_freq’ defined but not used [-Wunused-const-variable=]

Fixes: 7f100744749e ("PCI: tegra: Add Tegra194 MCFG quirks for ECAM errata")
Link: https://lore.kernel.org/r/20210610064134.336781-1-jonathanh@nvidia.com
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>

PCI: of: Clear 64-bit flag for non-prefetchable memory below 4GB

Alexandru and Qu reported this resource allocation failure on ROCKPro64 v2
and ROCK Pi 4B, both based on the RK3399:

  pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff 64bit]
  pci 0000:00:00.0: PCI bridge to [bus 01]
  pci 0000:00:00.0: BAR 14: no space for [mem size 0x00100000]
  pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]

"BAR 14" is the PCI bridge's 32-bit non-prefetchable window, and our PCI
allocation code isn't smart enough to allocate it in a host bridge window
marked as 64-bit, even though this should work fine.

A DT host bridge description includes the windows from the CPU address
space to the PCI bus space.  On a few architectures (microblaze, powerpc,
sparc), the DT may also describe PCI devices themselves, including their
BARs.

Before 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for
64-bit memory addresses"), of_bus_pci_get_flags() ignored the fact that
some DT addresses described 64-bit windows and BARs.  That was a problem
because the virtio virtual NIC has a 32-bit BAR and a 64-bit BAR, and the
driver couldn't distinguish them.

9d57e61bf723 set IORESOURCE_MEM_64 for those 64-bit DT ranges, which fixed
the virtio driver.  But it also set IORESOURCE_MEM_64 for host bridge
windows, which exposed the fact that the PCI allocator isn't smart enough
to put 32-bit resources in those 64-bit windows.

Clear IORESOURCE_MEM_64 from host bridge windows since we don't need that
information.

Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Fixes: 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses")
Link: https://lore.kernel.org/r/20210614230457.752811-1-punitagrawal@gmail.com
Reported-at: https://lore.kernel.org/lkml/7a1e2ebc-f7d8-8431-d844-41a9c36a8911@arm.com/
Reported-at: https://lore.kernel.org/lkml/YMyTUv7Jsd89PGci@m4/T/#u
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reported-by: Qu Wenruo <wqu@suse.com>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Tested-by: Domenico Andreoli <domenico.andreoli@linux.com>
Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>

tracing: Do no increment trace_clock_global() by one

The trace_clock_global() tries to make sure the events between CPUs is
somewhat in order. A global value is used and updated by the latest read
of a clock. If one CPU is ahead by a little, and is read by another CPU, a
lock is taken, and if the timestamp of the other CPU is behind, it will
simply use the other CPUs timestamp.

The lock is also only taken with a "trylock" due to tracing, and strange
recursions can happen. The lock is not taken at all in NMI context.

In the case where the lock is not able to be taken, the non synced
timestamp is returned. But it will not be less than the saved global
timestamp.

The problem arises because when the time goes "backwards" the time
returned is the saved timestamp plus 1. If the lock is not taken, and the
plus one to the timestamp is returned, there's a small race that can cause
the time to go backwards!

CPU0 CPU1
---- ----
trace_clock_global() {
    ts = clock() [ 1000 ]
    trylock(clock_lock) [ success ]
    global_ts = ts; [ 1000 ]

    <interrupted by NMI>
trace_clock_global() {
    ts = clock() [ 999 ]
    if (ts < global_ts)
ts = global_ts + 1 [ 1001 ]

    trylock(clock_lock) [ fail ]

    return ts [ 1001]
}
    unlock(clock_lock);
    return ts; [ 1000 ]
}

trace_clock_global() {
    ts = clock() [ 1000 ]
    if (ts < global_ts) [ false 1000 == 1000 ]

    trylock(clock_lock) [ success ]
    global_ts = ts; [ 1000 ]
    unlock(clock_lock)

    return ts; [ 1000 ]
}

The above case shows to reads of trace_clock_global() on the same CPU, but
the second read returns one less than the first read. That is, time when
backwards, and this is not what is allowed by trace_clock_global().

This was triggered by heavy tracing and the ring buffer checker that tests
for the clock going backwards:

Ring buffer clock went backwards: 20613921464 -> 20613921463
------------[ cut here ]------------
WARNING: CPU: 2 PID: 0 at kernel/trace/ring_buffer.c:3412 check_buffer+0x1b9/0x1c0
Modules linked in:
[..]
[CPU: 2]TIME DOES NOT MATCH expected:20620711698 actual:20620711697 delta:6790234 before:20613921463 after:20613921463
   [20613915818] PAGE TIME STAMP
   [20613915818] delta:0
   [20613915819] delta:1
   [20613916035] delta:216
   [20613916465] delta:430
   [20613916575] delta:110
   [20613916749] delta:174
   [20613917248] delta:499
   [20613917333] delta:85
   [20613917775] delta:442
   [20613917921] delta:146
   [20613918321] delta:400
   [20613918568] delta:247
   [20613918768] delta:200
   [20613919306] delta:538
   [20613919353] delta:47
   [20613919980] delta:627
   [20613920296] delta:316
   [20613920571] delta:275
   [20613920862] delta:291
   [20613921152] delta:290
   [20613921464] delta:312
   [20613921464] delta:0 TIME EXTEND
   [20613921464] delta:0

This happened more than once, and always for an off by one result. It also
started happening after commit aafe104aa9096 was added.

Cc: stable@vger.kernel.org
Fixes: aafe104aa9096 ("tracing: Restructure trace_clock_global() to never block")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Do not stop recording comms if the trace file is being read

A while ago, when the "trace" file was opened, tracing was stopped, and
code was added to stop recording the comms to saved_cmdlines, for mapping
of the pids to the task name.

Code has been added that only records the comm if a trace event occurred,
and there's no reason to not trace it if the trace file is opened.

Cc: stable@vger.kernel.org
Fixes: 7ffbd48d5cab2 ("tracing: Cache comms only after an event occurred")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Do not stop recording cmdlines when tracing is off

The saved_cmdlines is used to map pids to the task name, such that the
output of the tracing does not just show pids, but also gives a human
readable name for the task.

If the name is not mapped, the output looks like this:

<...>-1316 [005] ...2 132.044039: ...

Instead of this:

gnome-shell-1316 [005] ...2 132.044039: ...

The names are updated when tracing is running, but are skipped if tracing
is stopped. Unfortunately, this stops the recording of the names if the
top level tracer is stopped, and not if there's other tracers active.

The recording of a name only happens when a new event is written into a
ring buffer, so there is no need to test if tracing is on or not. If
tracing is off, then no event is written and no need to test if tracing is
off or not.

Remove the check, as it hides the names of tasks for events in the
instance buffers.

Cc: stable@vger.kernel.org
Fixes: 7ffbd48d5cab2 ("tracing: Cache comms only after an event occurred")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

recordmcount: Correct st_shndx handling

One should only use st_shndx when >SHN_UNDEF and <SHN_LORESERVE. When
SHN_XINDEX, then use .symtab_shndx. Otherwise use 0.

This handles the case: st_shndx >= SHN_LORESERVE && st_shndx != SHN_XINDEX.

Link: https://lore.kernel.org/lkml/20210607023839.26387-1-mark-pk.tsai@mediatek.com/
Link: https://lkml.kernel.org/r/20210616154126.2794-1-mark-pk.tsai@mediatek.com
Reported-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[handle endianness of sym->st_shndx]
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

mac80211: handle various extensible elements correctly

Various elements are parsed with a requirement to have an
exact size, when really we should only check that they have
the minimum size that we need. Check only that and therefore
ignore any additional data that they might carry.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.cd101f8040a4.Iadf0e9b37b100c6c6e79c7b298cc657c2be9151a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: reset profile_periodicity/ema_ap

Apparently we never clear these values, so they'll remain set
since the setting of them is conditional. Clear the values in
the relevant other cases.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.316e32d136a9.I2a12e51814258e1e1b526103894f4b9f19a91c8d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: avoid double free of PMSR request

If cfg80211_pmsr_process_abort() moves all the PMSR requests that
need to be freed into a local list before aborting and freeing them.
As a result, it is possible that cfg80211_pmsr_complete() will run in
parallel and free the same PMSR request.

Fix it by freeing the request in cfg80211_pmsr_complete() only if it
is still in the original pmsr list.

Cc: stable@vger.kernel.org
Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.1fbef57e269a.I00294bebdb0680b892f8d1d5c871fd9dbe785a5e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: make certificate generation more robust

If all net/wireless/certs/*.hex files are deleted, the build
will hang at this point since the 'cat' command will have no
arguments. Do "echo | cat - ..." so that even if the "..."
part is empty, the whole thing won't hang.

Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.c989056c3664.Ic3b77531d00b30b26dcd69c64e55ae2f60c3f31e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: minstrel_ht: fix sample time check

We need to skip sampling if the next sample time is after jiffies, not before.
This patch fixes an issue where in some cases only very little sampling (or none
at all) is performed, leading to really bad data rates

Fixes: 80d55154b2f8 ("mac80211: minstrel_ht: significantly redesign the rate probing strategy")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210617103854.61875-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Merge tag 'amd-drm-fixes-5.13-2021-06-16' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.13-2021-06-16:

amdgpu:
- GFX9 and 10 powergating fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616204913.4368-1-alexander.deucher@amd.com

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"Miscellaneous bugfixes.

  The main interesting one is a NULL pointer dereference reported by
  syzkaller ("KVM: x86: Immediately reset the MMU context when the SMM
  flag is cleared")"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: selftests: Fix kvm_check_cap() assertion
  KVM: x86/mmu: Calculate and check "full" mmu_role for nested MMU
  KVM: X86: Fix x86_emulator slab cache leak
  KVM: SVM: Call SEV Guest Decommission if ASID binding fails
  KVM: x86: Immediately reset the MMU context when the SMM flag is cleared
  KVM: x86: Fix fall-through warnings for Clang
  KVM: SVM: fix doc warnings
  KVM: selftests: Fix compiling errors when initializing the static structure
  kvm: LAPIC: Restore guard to prevent illegal APIC register access

net: qed: Fix memcpy() overflow of qed_dcbx_params()

The source (&dcbx_info->operational.params) and dest
(&p_hwfn->p_dcbx_info->set.config.params) are both struct qed_dcbx_params
(560 bytes), not struct qed_dcbx_admin_params (564 bytes), which is used
as the memcpy() size.

However it seems that struct qed_dcbx_operational_params
(dcbx_info->operational)'s layout matches struct qed_dcbx_admin_params
(p_hwfn->p_dcbx_info->set.config)'s 4 byte difference (3 padding, 1 byte
for "valid").

On the assumption that the size is wrong (rather than the source structure
type), adjust the memcpy() size argument to be 4 bytes smaller and add
a BUILD_BUG_ON() to validate any changes to the structure sizes.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: cdc_eem: fix tx fixup skb leak

when usbnet transmit a skb, eem fixup it in eem_tx_fixup(),
if skb_copy_expand() failed, it return NULL,
usbnet_start_xmit() will have no chance to free original skb.

fix it by free orginal skb in eem_tx_fixup() first,
then check skb clone status, if failed, return NULL to usbnet.

Fixes: 9f722c0978b0 ("usbnet: CDC EEM support (v5)")
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mlx5-fixes-2021-06-16' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2021-06-16

This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: hamradio: fix memory leak in mkiss_close

My local syzbot instance hit memory leak in
mkiss_open()[1]. The problem was in missing
free_netdev() in mkiss_close().

In mkiss_open() netdevice is allocated and then
registered, but in mkiss_close() netdevice was
only unregistered, but not freed.

Fail log:

BUG: memory leak
unreferenced object 0xffff8880281ba000 (size 4096):
  comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
  hex dump (first 32 bytes):
    61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00  ax0.............
    00 27 fa 2a 80 88 ff ff 00 00 00 00 00 00 00 00  .'.*............
  backtrace:
    [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0
    [<ffffffff8706e7e8>] alloc_netdev_mqs+0x98/0xe80
    [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
    [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
    [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
    [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
    [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
    [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
    [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

BUG: memory leak
unreferenced object 0xffff8880141a9a00 (size 96):
  comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
  hex dump (first 32 bytes):
    e8 a2 1b 28 80 88 ff ff e8 a2 1b 28 80 88 ff ff  ...(.......(....
    98 92 9c aa b0 40 02 00 00 00 00 00 00 00 00 00  .....@..........
  backtrace:
    [<ffffffff8709f68b>] __hw_addr_create_ex+0x5b/0x310
    [<ffffffff8709fb38>] __hw_addr_add_ex+0x1f8/0x2b0
    [<ffffffff870a0c7b>] dev_addr_init+0x10b/0x1f0
    [<ffffffff8706e88b>] alloc_netdev_mqs+0x13b/0xe80
    [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
    [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
    [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
    [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
    [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
    [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
    [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

BUG: memory leak
unreferenced object 0xffff8880219bfc00 (size 512):
  comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
  hex dump (first 32 bytes):
    00 a0 1b 28 80 88 ff ff 80 8f b1 8d ff ff ff ff  ...(............
    80 8f b1 8d ff ff ff ff 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0
    [<ffffffff8706eec7>] alloc_netdev_mqs+0x777/0xe80
    [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
    [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
    [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
    [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
    [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
    [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
    [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

BUG: memory leak
unreferenced object 0xffff888029b2b200 (size 256):
  comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0
    [<ffffffff8706f062>] alloc_netdev_mqs+0x912/0xe80
    [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
    [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
    [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
    [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
    [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
    [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
    [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 815f62bf7427 ("[PATCH] SMP rewrite of mkiss")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Fix an error handling path in 'be_probe()'

If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: d6b6d9877878 ("be2net: use PCIe AER capability")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

KVM: selftests: Fix kvm_check_cap() assertion

KVM_CHECK_EXTENSION ioctl can return any negative value on error,
and not necessarily -1. Change the assertion to reflect that.

Signed-off-by: Fuad Tabba <tabba@google.com>
Message-Id: <20210615150443.1183365-1-tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'fixes_for_v5.13-rc7' of git://git./linux/kernel/git/jack/linux-fs

Pull quota and fanotify fixes from Jan Kara:
"A fixup finishing disabling of quotactl_path() syscall (I've missed
  archs using different way to declare syscalls) and a fix of an fd leak
  in error handling path of fanotify"

* tag 'fixes_for_v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: finish disable quotactl_path syscall
  fanotify: fix copy_event_to_user() fid error clean up

usb: core: hub: Disable autosuspend for Cypress CY7C65632

The Cypress CY7C65632 appears to have an issue with auto suspend and
detecting devices, not too dissimilar to the SMSC 5534B hub. It is
easiest to reproduce by connecting multiple mass storage devices to
the hub at the same time. On a Lenovo Yoga, around 1 in 3 attempts
result in the devices not being detected. It is however possible to
make them appear using lsusb -v.

Disabling autosuspend for this hub resolves the issue.

Fixes: 1208f9e1d758 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210614155524.2228800-1-andrew@lunn.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: fix negative space_info->bytes_readonly

Consider we have a using block group on zoned btrfs.

|<- ZU ->|<- used ->|<---free--->|
                     `- Alloc offset
ZU: Zone unusable

Marking the block group read-only will migrate the zone unusable bytes
to the read-only bytes. So, we will have this.

|<- RO ->|<- used ->|<--- RO --->|

RO: Read only

When marking it back to read-write, btrfs_dec_block_group_ro()
subtracts the above "RO" bytes from the
space_info->bytes_readonly. And, it moves the zone unusable bytes back
and again subtracts those bytes from the space_info->bytes_readonly,
leading to negative bytes_readonly.

This can be observed in the output as eg.:

  Data, single: total=512.00MiB, used=165.21MiB, zone_unusable=16.00EiB
  Data, single: total=536870912, used=173256704, zone_unusable=18446744073603186688

This commit fixes the issue by reordering the operations.

Link: https://github.com/naota/linux/issues/37
Reported-by: David Sterba <dsterba@suse.com>
Fixes: 169e0da91a21 ("btrfs: zoned: track unusable bytes for zones")
CC: stable@vger.kernel.org # 5.12+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

net/mlx5: Reset mkey index on creation

Reset only the index part of the mkey and keep the variant part. On
devlink reload, driver recreates mkeys, so the mkey index may change.
Trying to preserve the variant part of the mkey, driver mistakenly
merged the mkey index with current value. In case of a devlink reload,
current value of index part is dirty, so the index may be corrupted.

Fixes: 54c62e13ad76 ("{IB,net}/mlx5: Setup mkey variant before mr create command invocation")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Don't create devices during unload flow

Running devlink reload command for port in switchdev mode cause
resources to corrupt: driver can't release allocated EQ and reclaim
memory pages, because "rdma" auxiliary device had add CQs which blocks
EQ from deletion.
Erroneous sequence happens during reload-down phase, and is following:

1. detach device - suspends auxiliary devices which support it, destroys
   others. During this step "eth-rep" and "rdma-rep" are destroyed,
   "eth" - suspended.
2. disable SRIOV - moves device to legacy mode; as part of disablement -
   rescans drivers. This step adds "rdma" auxiliary device.
3. destroy EQ table - <failure>.

Driver shouldn't create any device during unload flows. To handle that
implement MLX5_PRIV_FLAGS_DETACH flag, set it on device detach and unset
on device attach. If flag is set do no-op on drivers rescan.

Fixes: a925b5e309c9 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: DR, Fix STEv1 incorrect L3 decapsulation padding

Decapsulation L3 on small inner packets which are less than
64 Bytes was done incorrectly. In small packets there is an
extra padding added in L2 which should not be included in L3
length. The issue was that after decapL3 the extra L2 padding
caused an update on the L3 length.

To avoid this issue the new header is pushed to the beginning
of the packet (offset 0) which should not cause a HW reparse
and update the L3 length.

Fixes: c349b4137cfd ("net/mlx5: DR, Add STEv1 modify header logic")
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: SF_DEV, remove SF device on invalid state

When auxiliary bus autoprobe is disabled and SF is in ACTIVE state,
on SF port deletion it transitions from ACTIVE->ALLOCATED->INVALID.

When VHCA event handler queries the state, it is already transition
to INVALID state.

In this scenario, event handler missed to delete the SF device.

Fix it by deleting the SF when SF state is INVALID.

Fixes: 90d010b8634b ("net/mlx5: SF, Add auxiliary device support")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: E-Switch, Allow setting GUID for host PF vport

E-switch should be able to set the GUID of host PF vport.
Currently it returns an error. This results in below error
when user attempts to configure MAC address of the PF of an
external controller.

$ devlink port function set pci/0000:03:00.0/196608 \
hw_addr 00:00:00:11:22:33

mlx5_core 0000:03:00.0: mlx5_esw_set_vport_mac_locked:1876:(pid 6715):\
"Failed to set vport 0 node guid, err = -22.
RDMA_CM will not function properly for this VF."

Check for zero vport is no longer needed.

Fixes: 330077d14de1 ("net/mlx5: E-switch, Supporting setting devlink port function mac address")
Signed-off-by: Yuval Avnery <yuvalav@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Reviewed-by: Alaa Hleihel <alaa@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: E-Switch, Read PF mac address

External controller PF's MAC address is not read from the device during
vport setup. Fail to read this results in showing all zeros to user
while the factory programmed MAC is a valid value.

$ devlink port show eth1 -jp
{
    "port": {
        "pci/0000:03:00.0/196608": {
            "type": "eth",
            "netdev": "eth1",
            "flavour": "pcipf",
            "controller": 1,
            "pfnum": 0,
            "splittable": false,
            "function": {
                "hw_addr": "00:00:00:00:00:00"
            }
        }
    }
}

Hence, read it when enabling a vport.

After the fix,

$ devlink port show eth1 -jp
{
    "port": {
        "pci/0000:03:00.0/196608": {
            "type": "eth",
            "netdev": "eth1",
            "flavour": "pcipf",
            "controller": 1,
            "pfnum": 0,
            "splittable": false,
            "function": {
                "hw_addr": "98:03:9b:a0:60:11"
            }
        }
    }
}

Fixes: f099fde16db3 ("net/mlx5: E-switch, Support querying port function mac address")
Signed-off-by: Bodong Wang <bodong@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Alaa Hleihel <alaa@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Check that driver was probed prior attaching the device

The device can be requested to be attached despite being not probed.
This situation is possible if devlink reload races with module removal,
and the following kernel panic is an outcome of such race.

mlx5_core 0000:00:09.0: firmware version: 4.7.9999
mlx5_core 0000:00:09.0: 0.000 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x255 link)
BUG: unable to handle page fault for address: fffffffffffffff0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 3218067 P4D 3218067 PUD 321a067 PMD 0
Oops: 0000 [#1] SMP KASAN NOPTI
CPU: 7 PID: 250 Comm: devlink Not tainted 5.12.0-rc2+ #2836
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5_attach_device+0x80/0x280 [mlx5_core]
Code: f8 48 c1 e8 03 42 80 3c 38 00 0f 85 80 01 00 00 48 8b 45 68 48 8d 78 f0 48 89 fe 48 c1 ee 03 42 80 3c 3e 00 0f 85 70 01 00 00 <48> 8b 40 f0 48 85 c0 74 0d 48 89 ef ff d0 85 c0 0f 85 84 05 0e 00
RSP: 0018:ffff8880129675f0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff827407f1
RDX: 1ffff110011336cf RSI: 1ffffffffffffffe RDI: fffffffffffffff0
RBP: ffff888008e0c000 R08: 0000000000000008 R09: ffffffffa0662ee7
R10: fffffbfff40cc5dc R11: 0000000000000000 R12: ffff88800ea002e0
R13: ffffed1001d459f7 R14: ffffffffa05ef4f8 R15: dffffc0000000000
FS:  00007f51dfeaf740(0000) GS:ffff88806d5c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffffffffffff0 CR3: 000000000bc82006 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  mlx5_load_one+0x117/0x1d0 [mlx5_core]
  devlink_reload+0x2d5/0x520
  ? devlink_remote_reload_actions_performed+0x30/0x30
  ? mutex_trylock+0x24b/0x2d0
  ? devlink_nl_cmd_reload+0x62b/0x1070
  devlink_nl_cmd_reload+0x66d/0x1070
  ? devlink_reload+0x520/0x520
  ? devlink_nl_pre_doit+0x64/0x4d0
  genl_family_rcv_msg_doit+0x1e9/0x2f0
  ? mutex_lock_io_nested+0x1130/0x1130
  ? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240
  ? security_capable+0x51/0x90
  genl_rcv_msg+0x27f/0x4a0
  ? genl_get_cmd+0x3c0/0x3c0
  ? lock_acquire+0x1a9/0x6d0
  ? devlink_reload+0x520/0x520
  ? lock_release+0x6c0/0x6c0
  netlink_rcv_skb+0x11d/0x340
  ? genl_get_cmd+0x3c0/0x3c0
  ? netlink_ack+0x9f0/0x9f0
  ? lock_release+0x1f9/0x6c0
  genl_rcv+0x24/0x40
  netlink_unicast+0x433/0x700
  ? netlink_attachskb+0x730/0x730
  ? _copy_from_iter_full+0x178/0x650
  ? __alloc_skb+0x113/0x2b0
  netlink_sendmsg+0x6f1/0xbd0
  ? netlink_unicast+0x700/0x700
  ? netlink_unicast+0x700/0x700
  sock_sendmsg+0xb0/0xe0
  __sys_sendto+0x193/0x240
  ? __x64_sys_getpeername+0xb0/0xb0
  ? copy_page_range+0x2300/0x2300
  ? __up_read+0x1a1/0x7b0
  ? do_user_addr_fault+0x219/0xdc0
  __x64_sys_sendto+0xdd/0x1b0
  ? syscall_enter_from_user_mode+0x1d/0x50
  do_syscall_64+0x2d/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f51dffb514a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c
RSP: 002b:00007ffcaef22e78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f51dffb514a
RDX: 0000000000000030 RSI: 000055750daf2440 RDI: 0000000000000003
RBP: 000055750daf2410 R08: 00007f51e0081200 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Modules linked in: mlx5_core(-) ptp pps_core ib_ipoib rdma_ucm rdma_cm iw_cm ib_cm ib_umad ib_uverbs ib_core [last unloaded: mlx5_ib]
CR2: fffffffffffffff0
---[ end trace 7789831bfe74fa42 ]---

Fixes: a925b5e309c9 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Fix error path for set HCA defaults

In the case of the failure to execute mlx5_core_set_hca_defaults(),
we used wrong goto label to execute error unwind flow.

Fixes: 5bef709d76a2 ("net/mlx5: Enable host PF HCA after eswitch is initialized")
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

s390/ap: Fix hanging ioctl caused by wrong msg counter

When a AP queue is switched to soft offline, all pending
requests are purged out of the pending requests list and
'received' by the upper layer like zcrypt device drivers.
This is also done for requests which are already enqueued
into the firmware queue. A request in a firmware queue
may eventually produce an response message, but there is
no waiting process any more. However, the response was
counted with the queue_counter and as this counter was
reset to 0 with the offline switch, the pending response
caused the queue_counter to get negative. The next request
increased this counter to 0 (instead of 1) which caused
the ap code to assume there is nothing to receive and so
the response for this valid request was never tried to
fetch from the firmware queue.

This all caused a queue to not work properly after a
switch offline/online and in the end processes to hang
forever when trying to send a crypto request after an
queue offline/online switch cicle.

Fixed by a) making sure the counter does not drop below 0
and b) on a successful enqueue of a message has at least
a value of 1.

Additionally a warning is emitted, when a reply can't get
assigned to a waiting process. This may be normal operation
(process had timeout or has been killed) but may give a
hint that something unexpected happened (like this odd
behavior described above).

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

drm/amdgpu/gfx10: enlarge CP_MEC_DOORBELL_RANGE_UPPER to cover full doorbell.

If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu/gfx9: fix the doorbell missing when in CGPG issue.

If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

r8169: Avoid memcpy() over-reading of ETH_SS_STATS

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring array fields.

The memcpy() is copying the entire structure, not just the first array.
Adjust the source argument so the compiler can do appropriate bounds
checking.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

sh_eth: Avoid memcpy() over-reading of ETH_SS_STATS

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring array fields.

The memcpy() is copying the entire structure, not just the first array.
Adjust the source argument so the compiler can do appropriate bounds
checking.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8152: Avoid memcpy() over-reading of ETH_SS_STATS

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring array fields.

The memcpy() is copying the entire structure, not just the first array.
Adjust the source argument so the compiler can do appropriate bounds
checking.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: net: use bash to run udpgro_fwd test case

udpgro_fwd.sh contains many bash specific operators ("[[", "local -r"),
but it's using /bin/sh; in some distro /bin/sh is mapped to /bin/dash,
that doesn't support such operators.

Force the test to use /bin/bash explicitly and prevent false positive
test failures.

Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/af_unix: fix a data-race in unix_dgram_sendmsg / unix_release_sock

While unix_may_send(sk, osk) is called while osk is locked, it appears
unix_release_sock() can overwrite unix_peer() after this lock has been
released, making KCSAN unhappy.

Changing unix_release_sock() to access/change unix_peer()
before lock is released should fix this issue.

BUG: KCSAN: data-race in unix_dgram_sendmsg / unix_release_sock

write to 0xffff88810465a338 of 8 bytes by task 20852 on cpu 1:
unix_release_sock+0x4ed/0x6e0 net/unix/af_unix.c:558
unix_release+0x2f/0x50 net/unix/af_unix.c:859
__sock_release net/socket.c:599 [inline]
sock_close+0x6c/0x150 net/socket.c:1258
__fput+0x25b/0x4e0 fs/file_table.c:280
____fput+0x11/0x20 fs/file_table.c:313
task_work_run+0xae/0x130 kernel/task_work.c:164
tracehook_notify_resume include/linux/tracehook.h:189 [inline]
exit_to_user_mode_loop kernel/entry/common.c:175 [inline]
exit_to_user_mode_prepare+0x156/0x190 kernel/entry/common.c:209
__syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:302
do_syscall_64+0x56/0x90 arch/x86/entry/common.c:57
entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff88810465a338 of 8 bytes by task 20888 on cpu 0:
unix_may_send net/unix/af_unix.c:189 [inline]
unix_dgram_sendmsg+0x923/0x1610 net/unix/af_unix.c:1712
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg net/socket.c:674 [inline]
____sys_sendmsg+0x360/0x4d0 net/socket.c:2350
___sys_sendmsg net/socket.c:2404 [inline]
__sys_sendmmsg+0x315/0x4b0 net/socket.c:2490
__do_sys_sendmmsg net/socket.c:2519 [inline]
__se_sys_sendmmsg net/socket.c:2516 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516
do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0xffff888167905400 -> 0x0000000000000000

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 20888 Comm: syz-executor.0 Not tainted 5.13.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: net: veth: make test compatible with dash

veth.sh is a shell script that uses /bin/sh; some distro (Ubuntu for
example) use dash as /bin/sh and in this case the test reports the
following error:

# ./veth.sh: 21: local: -r: bad variable name
# ./veth.sh: 21: local: -r: bad variable name

This happens because dash doesn't support the option "-r" with local.

Moreover, in case of missing bpf object, the script is exiting -1, that
is an illegal number for dash:

exit: Illegal number: -1

Change the script to be compatible both with bash and dash and prevent
the errors above.

Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-packet-data-races'

Eric Dumazet says:

====================
net/packet: annotate data races

KCSAN sent two reports about data races in af_packet.
Nothing serious, but worth fixing.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net/packet: annotate accesses to po->ifindex

Like prior patch, we need to annotate lockless accesses to po->ifindex
For instance, packet_getname() is reading po->ifindex (twice) while
another thread is able to change po->ifindex.

KCSAN reported:

BUG: KCSAN: data-race in packet_do_bind / packet_getname

write to 0xffff888143ce3cbc of 4 bytes by task 25573 on cpu 1:
packet_do_bind+0x420/0x7e0 net/packet/af_packet.c:3191
packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255
__sys_bind+0x200/0x290 net/socket.c:1637
__do_sys_bind net/socket.c:1648 [inline]
__se_sys_bind net/socket.c:1646 [inline]
__x64_sys_bind+0x3d/0x50 net/socket.c:1646
do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff888143ce3cbc of 4 bytes by task 25578 on cpu 0:
packet_getname+0x5b/0x1a0 net/packet/af_packet.c:3525
__sys_getsockname+0x10e/0x1a0 net/socket.c:1887
__do_sys_getsockname net/socket.c:1902 [inline]
__se_sys_getsockname net/socket.c:1899 [inline]
__x64_sys_getsockname+0x3e/0x50 net/socket.c:1899
do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00000000 -> 0x00000001

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 25578 Comm: syz-executor.5 Not tainted 5.13.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/packet: annotate accesses to po->bind

tpacket_snd(), packet_snd(), packet_getname() and packet_seq_show()
can read po->num without holding a lock. This means other threads
can change po->num at the same time.

KCSAN complained about this known fact [1]
Add READ_ONCE()/WRITE_ONCE() to address the issue.

[1] BUG: KCSAN: data-race in packet_do_bind / packet_sendmsg

write to 0xffff888131a0dcc0 of 2 bytes by task 24714 on cpu 0:
packet_do_bind+0x3ab/0x7e0 net/packet/af_packet.c:3181
packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255
__sys_bind+0x200/0x290 net/socket.c:1637
__do_sys_bind net/socket.c:1648 [inline]
__se_sys_bind net/socket.c:1646 [inline]
__x64_sys_bind+0x3d/0x50 net/socket.c:1646
do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff888131a0dcc0 of 2 bytes by task 24719 on cpu 1:
packet_snd net/packet/af_packet.c:2899 [inline]
packet_sendmsg+0x317/0x3570 net/packet/af_packet.c:3040
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg net/socket.c:674 [inline]
____sys_sendmsg+0x360/0x4d0 net/socket.c:2350
___sys_sendmsg net/socket.c:2404 [inline]
__sys_sendmsg+0x1ed/0x270 net/socket.c:2433
__do_sys_sendmsg net/socket.c:2442 [inline]
__se_sys_sendmsg net/socket.c:2440 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2440
do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x0000 -> 0x1200

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 24719 Comm: syz-executor.5 Not tainted 5.13.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-5.13-20210616' of git://git./linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2021-06-16

this is a pull request of 4 patches for net/master.

The first patch is by Oleksij Rempel and fixes a Use-after-Free found
by syzbot in the j1939 stack.

The next patch is by Tetsuo Handa and fixes hung task detected by
syzbot in the bcm, raw and isotp protocols.

Norbert Slusarek's patch fixes a infoleak in bcm's struct
bcm_msg_head.

Pavel Skripkin's patch fixes a memory leak in the mcba_usb driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipv4: fix memory leak in ip_mc_add1_src

BUG: memory leak
unreferenced object 0xffff888101bc4c00 (size 32):
  comm "syz-executor527", pid 360, jiffies 4294807421 (age 19.329s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    01 00 00 00 00 00 00 00 ac 14 14 bb 00 00 02 00 ................
  backtrace:
    [<00000000f17c5244>] kmalloc include/linux/slab.h:558 [inline]
    [<00000000f17c5244>] kzalloc include/linux/slab.h:688 [inline]
    [<00000000f17c5244>] ip_mc_add1_src net/ipv4/igmp.c:1971 [inline]
    [<00000000f17c5244>] ip_mc_add_src+0x95f/0xdb0 net/ipv4/igmp.c:2095
    [<000000001cb99709>] ip_mc_source+0x84c/0xea0 net/ipv4/igmp.c:2416
    [<0000000052cf19ed>] do_ip_setsockopt net/ipv4/ip_sockglue.c:1294 [inline]
    [<0000000052cf19ed>] ip_setsockopt+0x114b/0x30c0 net/ipv4/ip_sockglue.c:1423
    [<00000000477edfbc>] raw_setsockopt+0x13d/0x170 net/ipv4/raw.c:857
    [<00000000e75ca9bb>] __sys_setsockopt+0x158/0x270 net/socket.c:2117
    [<00000000bdb993a8>] __do_sys_setsockopt net/socket.c:2128 [inline]
    [<00000000bdb993a8>] __se_sys_setsockopt net/socket.c:2125 [inline]
    [<00000000bdb993a8>] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2125
    [<000000006a1ffdbd>] do_syscall_64+0x40/0x80 arch/x86/entry/common.c:47
    [<00000000b11467c4>] entry_SYSCALL_64_after_hwframe+0x44/0xae

In commit 24803f38a5c0 ("igmp: do not remove igmp souce list info when set
link down"), the ip_mc_clear_src() in ip_mc_destroy_dev() was removed,
because it was also called in igmpv3_clear_delrec().

Rough callgraph:

inetdev_destroy
-> ip_mc_destroy_dev
     -> igmpv3_clear_delrec
        -> ip_mc_clear_src
-> RCU_INIT_POINTER(dev->ip_ptr, NULL)

However, ip_mc_clear_src() called in igmpv3_clear_delrec() doesn't
release in_dev->mc_list->sources. And RCU_INIT_POINTER() assigns the
NULL to dev->ip_ptr. As a result, in_dev cannot be obtained through
inetdev_by_index() and then in_dev->mc_list->sources cannot be released
by ip_mc_del1_src() in the sock_close. Rough call sequence goes like:

sock_close
-> __sock_release
   -> inet_release
      -> ip_mc_drop_socket
         -> inetdev_by_index
         -> ip_mc_leave_src
            -> ip_mc_del_src
               -> ip_mc_del1_src

So we still need to call ip_mc_clear_src() in ip_mc_destroy_dev() to free
in_dev->mc_list->sources.

Fixes: 24803f38a5c0 ("igmp: do not remove igmp souce list info ...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chengyang Fan <cy.fan@huawei.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'fec-ptp-fixes'

Joakim Zhang says:

====================
net: fixes for fec ptp

Small fixes for fec ptp.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: fec_ptp: fix issue caused by refactor the fec_devtype

Commit da722186f654 ("net: fec: set GPR bit on suspend by DT configuration.")
refactor the fec_devtype, need adjust ptp driver accordingly.

Fixes: da722186f654 ("net: fec: set GPR bit on suspend by DT configuration.")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: fec_ptp: add clock rate zero check

Add clock rate zero check to fix coverity issue of "divide by 0".

Fixes: commit 85bd1798b24a ("net: fec: fix spin_lock dead lock")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: fix possible use-after-free in smsc75xx_bind

The commit 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind")
fails to clean up the work scheduled in smsc75xx_reset->
smsc75xx_set_multicast, which leads to use-after-free if the work is
scheduled to start after the deallocation. In addition, this patch
also removes a dangling pointer - dev->data[0].

This patch calls cancel_work_sync to cancel the scheduled work and set
the dangling pointer to NULL.

Fixes: 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: disable clocks in stmmac_remove_config_dt()

Platform drivers may call stmmac_probe_config_dt() to parse dt, could
call stmmac_remove_config_dt() in error handing after dt parsed, so need
disable clocks in stmmac_remove_config_dt().

Go through all platforms drivers which use stmmac_probe_config_dt(),
none of them disable clocks manually, so it's safe to disable them in
stmmac_remove_config_dt().

Fixes: commit d2ed0a7755fe ("net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"18 patches.

  Subsystems affected by this patch series: mm (memory-failure, swap,
  slub, hugetlb, memory-failure, slub, thp, sparsemem), and coredump"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/sparse: fix check_usemap_section_nr warnings
  mm: thp: replace DEBUG_VM BUG with VM_WARN when unmap fails for split
  mm/thp: unmap_mapping_page() to fix THP truncate_cleanup_page()
  mm/thp: fix page_address_in_vma() on file THP tails
  mm/thp: fix vma_address() if virtual address below file offset
  mm/thp: try_to_unmap() use TTU_SYNC for safe splitting
  mm/thp: make is_huge_zero_pmd() safe and quicker
  mm/thp: fix __split_huge_pmd_locked() on shmem migration entry
  mm, thp: use head page in __migration_entry_wait()
  mm/slub.c: include swab.h
  crash_core, vmcoreinfo: append 'SECTION_SIZE_BITS' to vmcoreinfo
  mm/memory-failure: make sure wait for page writeback in memory_failure
  mm/hugetlb: expand restore_reserve_on_error functionality
  mm/slub: actually fix freelist pointer vs redzoning
  mm/slub: fix redzoning for small allocations
  mm/slub: clarify verification reporting
  mm/swap: fix pte_same_as_swp() not removing uffd-wp bit when compare
  mm,hwpoison: fix race with hugetlb page allocation

mm/sparse: fix check_usemap_section_nr warnings

I see a "virt_to_phys used for non-linear address" warning from
check_usemap_section_nr() on arm64 platforms.

In current implementation of NODE_DATA, if CONFIG_NEED_MULTIPLE_NODES=y,
pglist_data is dynamically allocated and assigned to node_data[].

For example, in arch/arm64/include/asm/mmzone.h:

  extern struct pglist_data *node_data[];
  #define NODE_DATA(nid)          (node_data[(nid)])

If CONFIG_NEED_MULTIPLE_NODES=n, pglist_data is defined as a global
variable named "contig_page_data".

For example, in include/linux/mmzone.h:

  extern struct pglist_data contig_page_data;
  #define NODE_DATA(nid)          (&contig_page_data)

If CONFIG_DEBUG_VIRTUAL is not enabled, __pa() can handle both
dynamically allocated linear addresses and symbol addresses.  However,
if (CONFIG_DEBUG_VIRTUAL=y && CONFIG_NEED_MULTIPLE_NODES=n) we can see
the "virt_to_phys used for non-linear address" warning because that
&contig_page_data is not a linear address on arm64.

Warning message:

  virt_to_phys used for non-linear address: (contig_page_data+0x0/0x1c00)
  WARNING: CPU: 0 PID: 0 at arch/arm64/mm/physaddr.c:15 __virt_to_phys+0x58/0x68
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper Tainted: G        W         5.13.0-rc1-00074-g1140ab592e2e #3
  Hardware name: linux,dummy-virt (DT)
  pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO BTYPE=--)
  Call trace:
     __virt_to_phys+0x58/0x68
     check_usemap_section_nr+0x50/0xfc
     sparse_init_nid+0x1ac/0x28c
     sparse_init+0x1c4/0x1e0
     bootmem_init+0x60/0x90
     setup_arch+0x184/0x1f0
     start_kernel+0x78/0x488

To fix it, create a small function to handle both translation.

Link: https://lkml.kernel.org/r/1623058729-27264-1-git-send-email-miles.chen@mediatek.com
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Kazu <k-hagio-ab@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: thp: replace DEBUG_VM BUG with VM_WARN when unmap fails for split

When debugging the bug reported by Wang Yugui [1], try_to_unmap() may
fail, but the first VM_BUG_ON_PAGE() just checks page_mapcount() however
it may miss the failure when head page is unmapped but other subpage is
mapped. Then the second DEBUG_VM BUG() that check total mapcount would
catch it. This may incur some confusion.

As this is not a fatal issue, so consolidate the two DEBUG_VM checks
into one VM_WARN_ON_ONCE_PAGE().

[1] https://lore.kernel.org/linux-mm/20210412180659.B9E3.409509F4@e16-tech.com/

Link: https://lkml.kernel.org/r/d0f0db68-98b8-ebfb-16dc-f29df24cf012@google.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jue Wang <juew@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/thp: unmap_mapping_page() to fix THP truncate_cleanup_page()

There is a race between THP unmapping and truncation, when truncate sees
pmd_none() and skips the entry, after munmap's zap_huge_pmd() cleared
it, but before its page_remove_rmap() gets to decrement
compound_mapcount: generating false "BUG: Bad page cache" reports that
the page is still mapped when deleted.  This commit fixes that, but not
in the way I hoped.

The first attempt used try_to_unmap(page, TTU_SYNC|TTU_IGNORE_MLOCK)
instead of unmap_mapping_range() in truncate_cleanup_page(): it has
often been an annoyance that we usually call unmap_mapping_range() with
no pages locked, but there apply it to a single locked page.
try_to_unmap() looks more suitable for a single locked page.

However, try_to_unmap_one() contains a VM_BUG_ON_PAGE(!pvmw.pte,page):
it is used to insert THP migration entries, but not used to unmap THPs.
Copy zap_huge_pmd() and add THP handling now? Perhaps, but their TLB
needs are different, I'm too ignorant of the DAX cases, and couldn't
decide how far to go for anon+swap.  Set that aside.

The second attempt took a different tack: make no change in truncate.c,
but modify zap_huge_pmd() to insert an invalidated huge pmd instead of
clearing it initially, then pmd_clear() between page_remove_rmap() and
unlocking at the end.  Nice.  But powerpc blows that approach out of the
water, with its serialize_against_pte_lookup(), and interesting pgtable
usage.  It would need serious help to get working on powerpc (with a
minor optimization issue on s390 too).  Set that aside.

Just add an "if (page_mapped(page)) synchronize_rcu();" or other such
delay, after unmapping in truncate_cleanup_page()? Perhaps, but though
that's likely to reduce or eliminate the number of incidents, it would
give less assurance of whether we had identified the problem correctly.

This successful iteration introduces "unmap_mapping_page(page)" instead
of try_to_unmap(), and goes the usual unmap_mapping_range_tree() route,
with an addition to details.  Then zap_pmd_range() watches for this
case, and does spin_unlock(pmd_lock) if so - just like
page_vma_mapped_walk() now does in the PVMW_SYNC case.  Not pretty, but
safe.

Note that unmap_mapping_page() is doing a VM_BUG_ON(!PageLocked) to
assert its interface; but currently that's only used to make sure that
page->mapping is stable, and zap_pmd_range() doesn't care if the page is
locked or not.  Along these lines, in invalidate_inode_pages2_range()
move the initial unmap_mapping_range() out from under page lock, before
then calling unmap_mapping_page() under page lock if still mapped.

Link: https://lkml.kernel.org/r/a2a4a148-cdd8-942c-4ef8-51b77f643dbe@google.com
Fixes: fc127da085c2 ("truncate: handle file thp")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jue Wang <juew@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/thp: fix page_address_in_vma() on file THP tails

Anon THP tails were already supported, but memory-failure may need to
use page_address_in_vma() on file THP tails, which its page->mapping
check did not permit: fix it.

hughd adds: no current usage is known to hit the issue, but this does
fix a subtle trap in a general helper: best fixed in stable sooner than
later.

Link: https://lkml.kernel.org/r/a0d9b53-bf5d-8bab-ac5-759dc61819c1@google.com
Fixes: 800d8c63b2e9 ("shmem: add huge pages support")
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/thp: fix vma_address() if virtual address below file offset

Running certain tests with a DEBUG_VM kernel would crash within hours,
on the total_mapcount BUG() in split_huge_page_to_list(), while trying
to free up some memory by punching a hole in a shmem huge page: split's
try_to_unmap() was unable to find all the mappings of the page (which,
on a !DEBUG_VM kernel, would then keep the huge page pinned in memory).

When that BUG() was changed to a WARN(), it would later crash on the
VM_BUG_ON_VMA(end < vma->vm_start || start >= vma->vm_end, vma) in
mm/internal.h:vma_address(), used by rmap_walk_file() for
try_to_unmap().

vma_address() is usually correct, but there's a wraparound case when the
vm_start address is unusually low, but vm_pgoff not so low:
vma_address() chooses max(start, vma->vm_start), but that decides on the
wrong address, because start has become almost ULONG_MAX.

Rewrite vma_address() to be more careful about vm_pgoff; move the
VM_BUG_ON_VMA() out of it, returning -EFAULT for errors, so that it can
be safely used from page_mapped_in_vma() and page_address_in_vma() too.

Add vma_address_end() to apply similar care to end address calculation,
in page_vma_mapped_walk() and page_mkclean_one() and try_to_unmap_one();
though it raises a question of whether callers would do better to supply
pvmw->end to page_vma_mapped_walk() - I chose not, for a smaller patch.

An irritation is that their apparent generality breaks down on KSM
pages, which cannot be located by the page->index that page_to_pgoff()
uses: as commit 4b0ece6fa016 ("mm: migrate: fix remove_migration_pte()
for ksm pages") once discovered. I dithered over the best thing to do
about that, and have ended up with a VM_BUG_ON_PAGE(PageKsm) in both
vma_address() and vma_address_end(); though the only place in danger of
using it on them was try_to_unmap_one().

Sidenote: vma_address() and vma_address_end() now use compound_nr() on a
head page, instead of thp_size(): to make the right calculation on a
hugetlbfs page, whether or not THPs are configured. try_to_unmap() is
used on hugetlbfs pages, but perhaps the wrong calculation never
mattered.

Link: https://lkml.kernel.org/r/caf1c1a3-7cfb-7f8f-1beb-ba816e932825@google.com
Fixes: a8fa41ad2f6f ("mm, rmap: check all VMAs that PTE-mapped THP can be part of")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jue Wang <juew@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/thp: try_to_unmap() use TTU_SYNC for safe splitting

Stressing huge tmpfs often crashed on unmap_page()'s VM_BUG_ON_PAGE
(!unmap_success): with dump_page() showing mapcount:1, but then its raw
struct page output showing _mapcount ffffffff i.e. mapcount 0.

And even if that particular VM_BUG_ON_PAGE(!unmap_success) is removed,
it is immediately followed by a VM_BUG_ON_PAGE(compound_mapcount(head)),
and further down an IS_ENABLED(CONFIG_DEBUG_VM) total_mapcount BUG():
all indicative of some mapcount difficulty in development here perhaps.
But the !CONFIG_DEBUG_VM path handles the failures correctly and
silently.

I believe the problem is that once a racing unmap has cleared pte or
pmd, try_to_unmap_one() may skip taking the page table lock, and emerge
from try_to_unmap() before the racing task has reached decrementing
mapcount.

Instead of abandoning the unsafe VM_BUG_ON_PAGE(), and the ones that
follow, use PVMW_SYNC in try_to_unmap_one() in this case: adding
TTU_SYNC to the options, and passing that from unmap_page().

When CONFIG_DEBUG_VM, or for non-debug too? Consensus is to do the same
for both: the slight overhead added should rarely matter, except perhaps
if splitting sparsely-populated multiply-mapped shmem. Once confident
that bugs are fixed, TTU_SYNC here can be removed, and the race
tolerated.

Link: https://lkml.kernel.org/r/c1e95853-8bcd-d8fd-55fa-e7f2488e78f@google.com
Fixes: fec89c109f3a ("thp: rewrite freeze_page()/unfreeze_page() with generic rmap walkers")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jue Wang <juew@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/thp: make is_huge_zero_pmd() safe and quicker

Most callers of is_huge_zero_pmd() supply a pmd already verified
present; but a few (notably zap_huge_pmd()) do not - it might be a pmd
migration entry, in which the pfn is encoded differently from a present
pmd: which might pass the is_huge_zero_pmd() test (though not on x86,
since L1TF forced us to protect against that); or perhaps even crash in
pmd_page() applied to a swap-like entry.

Make it safe by adding pmd_present() check into is_huge_zero_pmd()
itself; and make it quicker by saving huge_zero_pfn, so that
is_huge_zero_pmd() will not need to do that pmd_page() lookup each time.

__split_huge_pmd_locked() checked pmd_trans_huge() before: that worked,
but is unnecessary now that is_huge_zero_pmd() checks present.

Link: https://lkml.kernel.org/r/21ea9ca-a1f5-8b90-5e88-95fb1c49bbfa@google.com
Fixes: e71769ae5260 ("mm: enable thp migration for shmem thp")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jue Wang <juew@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/thp: fix __split_huge_pmd_locked() on shmem migration entry

Patch series "mm/thp: fix THP splitting unmap BUGs and related", v10.

Here is v2 batch of long-standing THP bug fixes that I had not got
around to sending before, but prompted now by Wang Yugui's report
https://lore.kernel.org/linux-mm/20210412180659.B9E3.409509F4@e16-tech.com/

Wang Yugui has tested a rollup of these fixes applied to 5.10.39, and
they have done no harm, but have *not* fixed that issue: something more
is needed and I have no idea of what.

This patch (of 7):

Stressing huge tmpfs page migration racing hole punch often crashed on
the VM_BUG_ON(!pmd_present) in pmdp_huge_clear_flush(), with DEBUG_VM=y
kernel; or shortly afterwards, on a bad dereference in
__split_huge_pmd_locked() when DEBUG_VM=n. They forgot to allow for pmd
migration entries in the non-anonymous case.

Full disclosure: those particular experiments were on a kernel with more
relaxed mmap_lock and i_mmap_rwsem locking, and were not repeated on the
vanilla kernel: it is conceivable that stricter locking happens to avoid
those cases, or makes them less likely; but __split_huge_pmd_locked()
already allowed for pmd migration entries when handling anonymous THPs,
so this commit brings the shmem and file THP handling into line.

And while there: use old_pmd rather than _pmd, as in the following
blocks; and make it clearer to the eye that the !vma_is_anonymous()
block is self-contained, making an early return after accounting for
unmapping.

Link: https://lkml.kernel.org/r/af88612-1473-2eaa-903-8d1a448b26@google.com
Link: https://lkml.kernel.org/r/dd221a99-efb3-cd1d-6256-7e646af29314@google.com
Fixes: e71769ae5260 ("mm: enable thp migration for shmem thp")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jue Wang <juew@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, thp: use head page in __migration_entry_wait()

We notice that hung task happens in a corner but practical scenario when
CONFIG_PREEMPT_NONE is enabled, as follows.

Process 0                       Process 1                     Process 2..Inf
split_huge_page_to_list
    unmap_page
        split_huge_pmd_address
                                __migration_entry_wait(head)
                                                              __migration_entry_wait(tail)
    remap_page (roll back)
        remove_migration_ptes
            rmap_walk_anon
                cond_resched

Where __migration_entry_wait(tail) is occurred in kernel space, e.g.,
copy_to_user in fstat, which will immediately fault again without
rescheduling, and thus occupy the cpu fully.

When there are too many processes performing __migration_entry_wait on
tail page, remap_page will never be done after cond_resched.

This makes __migration_entry_wait operate on the compound head page,
thus waits for remap_page to complete, whether the THP is split
successfully or roll back.

Note that put_and_wait_on_page_locked helps to drop the page reference
acquired with get_page_unless_zero, as soon as the page is on the wait
queue, before actually waiting.  So splitting the THP is only prevented
for a brief interval.

Link: https://lkml.kernel.org/r/b9836c1dd522e903891760af9f0c86a2cce987eb.1623144009.git.xuyu@linux.alibaba.com
Fixes: ba98828088ad ("thp: add option to setup migration entries during PMD split")
Suggested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Gang Deng <gavin.dg@linux.alibaba.com>
Signed-off-by: Xu Yu <xuyu@linux.alibaba.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/slub.c: include swab.h

Fixes build with CONFIG_SLAB_FREELIST_HARDENED=y.

Hopefully. But it's the right thing to do anwyay.

Fixes: 1ad53d9fa3f61 ("slub: improve bit diffusion for freelist ptr obfuscation")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213417
Reported-by: <vannguye@cisco.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

crash_core, vmcoreinfo: append 'SECTION_SIZE_BITS' to vmcoreinfo

As mentioned in kernel commit 1d50e5d0c505 ("crash_core, vmcoreinfo:
Append 'MAX_PHYSMEM_BITS' to vmcoreinfo"), SECTION_SIZE_BITS in the
formula:

    #define SECTIONS_SHIFT    (MAX_PHYSMEM_BITS - SECTION_SIZE_BITS)

Besides SECTIONS_SHIFT, SECTION_SIZE_BITS is also used to calculate
PAGES_PER_SECTION in makedumpfile just like kernel.

Unfortunately, this arch-dependent macro SECTION_SIZE_BITS changes, e.g.
recently in kernel commit f0b13ee23241 ("arm64/sparsemem: reduce
SECTION_SIZE_BITS").  But user space wants a stable interface to get
this info.  Such info is impossible to be deduced from a crashdump
vmcore.  Hence append SECTION_SIZE_BITS to vmcoreinfo.

Link: https://lkml.kernel.org/r/20210608103359.84907-1-kernelfans@gmail.com
Link: http://lists.infradead.org/pipermail/kexec/2021-June/022676.html
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Cc: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Boris Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Morse <james.morse@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Anderson <anderson@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory-failure: make sure wait for page writeback in memory_failure

Our syzkaller trigger the "BUG_ON(!list_empty(&inode->i_wb_list))" in
clear_inode:

  kernel BUG at fs/inode.c:519!
  Internal error: Oops - BUG: 0 [#1] SMP
  Modules linked in:
  Process syz-executor.0 (pid: 249, stack limit = 0x00000000a12409d7)
  CPU: 1 PID: 249 Comm: syz-executor.0 Not tainted 4.19.95
  Hardware name: linux,dummy-virt (DT)
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : clear_inode+0x280/0x2a8
  lr : clear_inode+0x280/0x2a8
  Call trace:
    clear_inode+0x280/0x2a8
    ext4_clear_inode+0x38/0xe8
    ext4_free_inode+0x130/0xc68
    ext4_evict_inode+0xb20/0xcb8
    evict+0x1a8/0x3c0
    iput+0x344/0x460
    do_unlinkat+0x260/0x410
    __arm64_sys_unlinkat+0x6c/0xc0
    el0_svc_common+0xdc/0x3b0
    el0_svc_handler+0xf8/0x160
    el0_svc+0x10/0x218
  Kernel panic - not syncing: Fatal exception

A crash dump of this problem show that someone called __munlock_pagevec
to clear page LRU without lock_page: do_mmap -> mmap_region -> do_munmap
-> munlock_vma_pages_range -> __munlock_pagevec.

As a result memory_failure will call identify_page_state without
wait_on_page_writeback.  And after truncate_error_page clear the mapping
of this page.  end_page_writeback won't call sb_clear_inode_writeback to
clear inode->i_wb_list.  That will trigger BUG_ON in clear_inode!

Fix it by checking PageWriteback too to help determine should we skip
wait_on_page_writeback.

Link: https://lkml.kernel.org/r/20210604084705.3729204-1-yangerkun@huawei.com
Fixes: 0bc1f8b0682c ("hwpoison: fix the handling path of the victimized page frame that belong to non-LRU")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: expand restore_reserve_on_error functionality

The routine restore_reserve_on_error is called to restore reservation
information when an error occurs after page allocation.  The routine
alloc_huge_page modifies the mapping reserve map and potentially the
reserve count during allocation.  If code calling alloc_huge_page
encounters an error after allocation and needs to free the page, the
reservation information needs to be adjusted.

Currently, restore_reserve_on_error only takes action on pages for which
the reserve count was adjusted(HPageRestoreReserve flag).  There is
nothing wrong with these adjustments.  However, alloc_huge_page ALWAYS
modifies the reserve map during allocation even if the reserve count is
not adjusted.  This can cause issues as observed during development of
this patch [1].

One specific series of operations causing an issue is:

- Create a shared hugetlb mapping
   Reservations for all pages created by default

- Fault in a page in the mapping
   Reservation exists so reservation count is decremented

- Punch a hole in the file/mapping at index previously faulted
   Reservation and any associated pages will be removed

- Allocate a page to fill the hole
   No reservation entry, so reserve count unmodified
   Reservation entry added to map by alloc_huge_page

- Error after allocation and before instantiating the page
   Reservation entry remains in map

- Allocate a page to fill the hole
   Reservation entry exists, so decrement reservation count

This will cause a reservation count underflow as the reservation count
was decremented twice for the same index.

A user would observe a very large number for HugePages_Rsvd in
/proc/meminfo.  This would also likely cause subsequent allocations of
hugetlb pages to fail as it would 'appear' that all pages are reserved.

This sequence of operations is unlikely to happen, however they were
easily reproduced and observed using hacked up code as described in [1].

Address the issue by having the routine restore_reserve_on_error take
action on pages where HPageRestoreReserve is not set.  In this case, we
need to remove any reserve map entry created by alloc_huge_page.  A new
helper routine vma_del_reservation assists with this operation.

There are three callers of alloc_huge_page which do not currently call
restore_reserve_on error before freeing a page on error paths.  Add
those missing calls.

[1] https://lore.kernel.org/linux-mm/20210528005029.88088-1-almasrymina@google.com/

Link: https://lkml.kernel.org/r/20210607204510.22617-1-mike.kravetz@oracle.com
Fixes: 96b96a96ddee ("mm/hugetlb: fix huge page reservation leak in private mapping error paths"
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/slub: actually fix freelist pointer vs redzoning

It turns out that SLUB redzoning ("slub_debug=Z") checks from
s->object_size rather than from s->inuse (which is normally bumped to
make room for the freelist pointer), so a cache created with an object
size less than 24 would have the freelist pointer written beyond
s->object_size, causing the redzone to be corrupted by the freelist
pointer.  This was very visible with "slub_debug=ZF":

  BUG test (Tainted: G    B            ): Right Redzone overwritten
  -----------------------------------------------------------------------------

  INFO: 0xffff957ead1c05de-0xffff957ead1c05df @offset=1502. First byte 0x1a instead of 0xbb
  INFO: Slab 0xffffef3950b47000 objects=170 used=170 fp=0x0000000000000000 flags=0x8000000000000200
  INFO: Object 0xffff957ead1c05d8 @offset=1496 fp=0xffff957ead1c0620

  Redzone  (____ptrval____): bb bb bb bb bb bb bb bb               ........
  Object   (____ptrval____): 00 00 00 00 00 f6 f4 a5               ........
  Redzone  (____ptrval____): 40 1d e8 1a aa                        @....
  Padding  (____ptrval____): 00 00 00 00 00 00 00 00               ........

Adjust the offset to stay within s->object_size.

(Note that no caches of in this size range are known to exist in the
kernel currently.)

Link: https://lkml.kernel.org/r/20210608183955.280836-4-keescook@chromium.org
Link: https://lore.kernel.org/linux-mm/20200807160627.GA1420741@elver.google.com/
Link: https://lore.kernel.org/lkml/0f7dd7b2-7496-5e2d-9488-2ec9f8e90441@suse.cz/Fixes:
Link: https://lore.kernel.org/lkml/CANpmjNOwZ5VpKQn+SYWovTkFB4VsT-RPwyENBmaK0dLcpqStkA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Marco Elver <elver@google.com>
Reported-by: "Lin, Zhenpeng" <zplin@psu.edu>
Tested-by: Marco Elver <elver@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>