Yu Kuai [Fri, 9 Oct 2020 12:38:01 +0000 (14:38 +0200)]
media: mtk-vcodec: add missing put_device() call in mtk_vcodec_init_dec_pm()
[ Upstream commit
5d4fa2c50125c9cda9e380d89268757cc5fa743d ]
if of_find_device_by_node() succeed, mtk_vcodec_init_dec_pm() doesn't have
a corresponding put_device(). Thus add jump target to fix the exception
handling for this function implementation.
Fixes:
590577a4e525 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Decoder Driver")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yu Kuai [Fri, 9 Oct 2020 12:37:58 +0000 (14:37 +0200)]
media: platform: add missing put_device() call in mtk_jpeg_clk_init()
[ Upstream commit
f28a81a3b64270da3588174feff4628c36e0ff4e ]
if of_find_device_by_node() succeeds, mtk_jpeg_clk_init() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes:
648372a87cee ("media: platform: Change the call functions of getting/enable/disable the jpeg's clock")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Thu, 8 Oct 2020 21:12:23 +0000 (23:12 +0200)]
media: tm6000: Fix sizeof() mismatches
[ Upstream commit
a08ad6339e0441ca12533969ed94a87e3655426e ]
The are two instances of sizeof() being used incorrectly. The
sizeof(void *) is incorrect because urb_buffer is a char ** pointer,
fix this by using sizeof(*dev->urb_buffer). The sizeof(dma_addr_t *)
is incorrect, it should be sizeof(*dev->urb_dma), which is a dma_addr_t
and not a dma_addr_t *. This errors did not cause any issues because
it just so happens the sizes are the same.
Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")
Fixes:
16427faf2867 ("[media] tm6000: Add parameter to keep urb bufs allocated")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shannon Nelson [Thu, 12 Nov 2020 18:22:07 +0000 (10:22 -0800)]
ionic: change set_rx_mode from_ndo to can_sleep
[ Upstream commit
81dbc24147f9250c186ae5875b3ed3136e9e293b ]
Instead of having two different ways of expressing the same
sleepability concept, using opposite logic, we can rework the
from_ndo to can_sleep for a more consistent usage.
Fixes:
1800eee16676 ("net: ionic: Replace in_interrupt() usage.")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shannon Nelson [Thu, 12 Nov 2020 18:22:06 +0000 (10:22 -0800)]
ionic: flatten calls to ionic_lif_rx_mode
[ Upstream commit
e94f76bb206333efcd0c02da5dbb142518c941a2 ]
The _ionic_lif_rx_mode() is only used once and really doesn't
need to be broken out.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shannon Nelson [Thu, 12 Nov 2020 18:22:05 +0000 (10:22 -0800)]
ionic: use mc sync for multicast filters
[ Upstream commit
e0243e1966592859da4c6ffe6d43e1576ec3c457 ]
We should be using the multicast sync routines for the multicast
filters. Also, let's just flatten the logic a bit and pull
the small unicast routine back into ionic_set_rx_mode().
Fixes:
1800eee16676 ("net: ionic: Replace in_interrupt() usage.")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hanjun Guo [Fri, 13 Nov 2020 03:11:14 +0000 (11:11 +0800)]
drm/amdkfd: Put ACPI table after using it
[ Upstream commit
c4cb773c702be5519442c8375a6476d08fe2cb46 ]
The acpi_get_table() should be coupled with acpi_put_table() if
the mapped table is not used at runtime to release the table
mapping which can prevent the memory leak.
In kfd_create_crat_image_acpi(), crat_table is copied to pcrat_image,
and in kfd_create_vcrat_image_cpu(), the acpi_table is only used to
get the OEM information, so those two table mappings need to be released
after using it.
Fixes:
174de876d6d0 ("drm/amdkfd: Group up CRAT related functions")
Fixes:
520b8fb755cc ("drm/amdkfd: Add topology support for CPUs")
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Mon, 2 Nov 2020 17:06:37 +0000 (19:06 +0200)]
scripts: kernel-doc: Restore anonymous enum parsing
[ Upstream commit
ae5b17e464146ddb8fee744fa2150922d6072916 ]
The commit
d38c8cfb0571 ("scripts: kernel-doc: add support for typedef enum")
broke anonymous enum parsing. Restore it by relying on members rather than
its name.
Fixes:
d38c8cfb0571 ("scripts: kernel-doc: add support for typedef enum")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20201102170637.36138-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jing Xiangfeng [Thu, 12 Nov 2020 06:49:24 +0000 (14:49 +0800)]
staging: gasket: interrupt: fix the missed eventfd_ctx_put() in gasket_interrupt.c
[ Upstream commit
ab5b769a23af12a675b9f3d7dd529250c527f5ac ]
gasket_interrupt_set_eventfd() misses to call eventfd_ctx_put() in an
error path. We check interrupt is valid before calling
eventfd_ctx_fdget() to fix it.
There is the same issue in gasket_interrupt_clear_eventfd(), Add the
missed function call to fix it.
Fixes:
9a69f5087ccc ("drivers/staging: Gasket driver framework + Apex driver")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Link: https://lore.kernel.org/r/20201112064924.99680-1-jingxiangfeng@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Mon, 9 Nov 2020 13:13:46 +0000 (21:13 +0800)]
staging: greybus: codecs: Fix reference counter leak in error handling
[ Upstream commit
3952659a6108f77a0d062d8e8487bdbdaf52a66c ]
gb_pm_runtime_get_sync has increased the usage counter of the device here.
Forgetting to call gb_pm_runtime_put_noidle will result in usage counter
leak in the error branch of (gbcodec_hw_params and gbcodec_prepare). We
fixed it by adding it.
Fixes:
c388ae7696992 ("greybus: audio: Update pm runtime support in dai_ops callback")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201109131347.1725288-2-zhangqilong3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Fri, 13 Nov 2020 10:15:02 +0000 (13:15 +0300)]
drm/udl: Fix missing error code in udl_handle_damage()
[ Upstream commit
a7319c8f50c5e93a12997e2d0821a2f7946fb734 ]
If udl_get_urb() fails then this should return a negative error code
but currently it returns success.
Fixes:
798ce3fe1c3a ("drm/udl: Begin/end access to imported buffers in damage-handler")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201113101502.GD168908@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qinglang Miao [Tue, 10 Nov 2020 07:42:21 +0000 (15:42 +0800)]
firmware: arm_scmi: Fix missing destroy_workqueue()
[ Upstream commit
6bbdb46c4b1bd57839c9c0a110bd81b0be0a4046 ]
destroy_workqueue is required before the return from scmi_notification_init
in case devm_kcalloc fails to allocate registered_protocols. Fix this by
simply moving registered_protocols allocation before alloc_workqueue.
Link: https://lore.kernel.org/r/20201110074221.41235-1-miaoqinglang@huawei.com
Fixes:
bd31b249692e ("firmware: arm_scmi: Add notification dispatch and delivery")
Suggested-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jack Xu [Fri, 6 Nov 2020 11:27:40 +0000 (19:27 +0800)]
crypto: qat - fix status check in qat_hal_put_rel_rd_xfer()
[ Upstream commit
3b5c130fb2e4c045369791c33c83b59f6e84f7d6 ]
The return value of qat_hal_rd_ae_csr() is always a CSR value and never
a status and should not be stored in the status variable of
qat_hal_put_rel_rd_xfer().
This removes the assignment as qat_hal_rd_ae_csr() is not expected to
fail.
A more comprehensive handling of the theoretical corner case which could
result in a fail will be submitted in a separate patch.
Fixes:
8c9478a400b7 ("crypto: qat - reduce stack size with KASAN")
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jason A. Donenfeld [Mon, 2 Nov 2020 13:48:15 +0000 (14:48 +0100)]
crypto: Kconfig - CRYPTO_MANAGER_EXTRA_TESTS requires the manager
[ Upstream commit
6569e3097f1c4a490bdf2b23d326855e04942dfd ]
The extra tests in the manager actually require the manager to be
selected too. Otherwise the linker gives errors like:
ld: arch/x86/crypto/chacha_glue.o: in function `chacha_simd_stream_xor':
chacha_glue.c:(.text+0x422): undefined reference to `crypto_simd_disabled_for_test'
Fixes:
2343d1529aff ("crypto: Kconfig - allow tests to be disabled when manager is disabled")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Mon, 16 Nov 2020 10:57:13 +0000 (12:57 +0200)]
soc: ti: omap-prm: Do not check rstst bit on deassert if already deasserted
[ Upstream commit
c1995e5afaf6abf3922b5395ad1f4096951e3276 ]
If a rstctrl reset bit is already deasserted, we can just bail out early
not wait for rstst to clear. Otherwise we can have deassert fail for
already deasserted resets.
Fixes:
c5117a78dd88 ("soc: ti: omap-prm: poll for reset complete during de-assert")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nirmoy Das [Mon, 9 Nov 2020 16:04:51 +0000 (17:04 +0100)]
drm/amdgpu: fix compute queue priority if num_kcq is less than 4
[ Upstream commit
3f66bf401e9fde1c35bb8b02dd7975659c40411d ]
Compute queues are configurable with module param, num_kcq.
amdgpu_gfx_is_high_priority_compute_queue was setting 1st 4 queues to
high priority queue leaving a null drm scheduler in
adev->gpu_sched[hw_ip]["normal_prio"].sched if num_kcq < 5.
This patch tries to fix it by alternating compute queue priority between
normal and high priority.
Fixes:
33abcb1f5a1719b1c (drm/amdgpu: set compute queue priority at mqd_init)
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Necip Fazil Yildiran [Mon, 2 Nov 2020 21:34:01 +0000 (00:34 +0300)]
MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMA
[ Upstream commit
3a5fe2fb9635c43359c9729352f45044f3c8df6b ]
When BCM47XX_BCMA is enabled and BCMA_DRIVER_PCI is disabled, it results
in the following Kbuild warning:
WARNING: unmet direct dependencies detected for BCMA_DRIVER_PCI_HOSTMODE
Depends on [n]: MIPS [=y] && BCMA_DRIVER_PCI [=n] && PCI_DRIVERS_LEGACY [=y] && BCMA [=y]=y
Selected by [y]:
- BCM47XX_BCMA [=y] && BCM47XX [=y] && PCI [=y]
The reason is that BCM47XX_BCMA selects BCMA_DRIVER_PCI_HOSTMODE without
depending on or selecting BCMA_DRIVER_PCI while BCMA_DRIVER_PCI_HOSTMODE
depends on BCMA_DRIVER_PCI. This can also fail building the kernel.
Honor the kconfig dependency to remove unmet direct dependency warnings
and avoid any potential build failures.
Fixes:
c1d1c5d4213e ("bcm47xx: add support for bcma bus")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209879
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nishanth Menon [Wed, 4 Nov 2020 22:25:19 +0000 (16:25 -0600)]
arm64: dts: ti: k3-am65*/j721e*: Fix unit address format error for dss node
[ Upstream commit
cfbf17e69ae82f647c287366b7573e532fc281ee ]
Fix the node address to follow the device tree convention.
This fixes the dtc warning:
<stdout>: Warning (simple_bus_reg): /bus@100000/dss@
04a00000: simple-bus
unit address format error, expected "4a00000"
Fixes:
76921f15acc0 ("arm64: dts: ti: k3-j721e-main: Add DSS node")
Fixes:
fc539b90eda2 ("arm64: dts: ti: am654: Add DSS node")
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://lore.kernel.org/r/20201104222519.12308-1-nm@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Thu, 12 Nov 2020 16:44:25 +0000 (10:44 -0600)]
ASoC: SOF: Intel: fix Kconfig dependency for SND_INTEL_DSP_CONFIG
[ Upstream commit
358f0ac1f2791c80c19cc26706cf34664c9fd756 ]
SND_INTEL_DSP_CONFIG is selected by the HDaudio, Skylake and SOF
drivers. When the HDaudio link is not selected as a option, this
Kconfig option is not touched and will default to whatever other
drivers selected. In the case e.g. where HDaudio is compiled as
built-in, the linker will complain:
ld: sound/soc/sof/sof-pci-dev.o: in function `sof_pci_probe':
sof-pci-dev.c:(.text+0x5c): undefined reference to
`snd_intel_dsp_driver_probe'
Adding the select for all HDaudio platforms, regardless of whether
they rely on the HDaudio link or not, solves the problem.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Fixes:
82d9d54a6c0ee ('ALSA: hda: add Intel DSP configuration / probe code')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201112164425.25603-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Mon, 26 Oct 2020 21:12:30 +0000 (22:12 +0100)]
RDMa/mthca: Work around -Wenum-conversion warning
[ Upstream commit
fbb7dc5db6dee553b5a07c27e86364a5223e244c ]
gcc points out a suspicious mixing of enum types in a function that
converts from MTHCA_OPCODE_* values to IB_WC_* values:
drivers/infiniband/hw/mthca/mthca_cq.c: In function 'mthca_poll_one':
drivers/infiniband/hw/mthca/mthca_cq.c:607:21: warning: implicit conversion from 'enum <anonymous>' to 'enum ib_wc_opcode' [-Wenum-conversion]
607 | entry->opcode = MTHCA_OPCODE_INVALID;
Nothing seems to ever check for MTHCA_OPCODE_INVALID again, no idea if
this is meaningful, but it seems harmless as it deals with an invalid
input.
Remove MTHCA_OPCODE_INVALID and set the ib_wc_opcode to 0xFF, which is
still bogus, but at least doesn't make compiler warnings.
Fixes:
2a4443a69934 ("[PATCH] IB/mthca: fill in opcode field for send completions")
Link: https://lore.kernel.org/r/20201026211311.3887003-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Wed, 11 Nov 2020 13:09:20 +0000 (21:09 +0800)]
ASoC: arizona: Fix a wrong free in wm8997_probe
[ Upstream commit
5e7aace13df24ff72511f29c14ebbfe638ef733c ]
In the normal path, we should not free the arizona,
we should return immediately. It will be free when
call remove operation.
Fixes:
31833ead95c2c ("ASoC: arizona: Move request of speaker IRQs into bus probe")
Reported-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20201111130923.220186-2-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miklos Szeredi [Wed, 11 Nov 2020 16:22:31 +0000 (17:22 +0100)]
virtiofs fix leak in setup
[ Upstream commit
66ab33bf6d4341574f88b511e856a73f6f2a921e ]
This can be triggered for example by adding the "-omand" mount option,
which will be rejected and virtio_fs_fill_super() will return an error.
In such a case the allocations for fuse_conn and fuse_mount will leak due
to s_root not yet being set and so ->put_super() not being called.
Fixes:
a62a8ef9d97d ("virtio-fs: add virtiofs filesystem")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Fri, 6 Nov 2020 01:50:35 +0000 (09:50 +0800)]
spi: sprd: fix reference leak in sprd_spi_remove
[ Upstream commit
e4062765bc2a41e025e29dd56bad798505036427 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in sprd_spi_remove, so we should fix it.
Fixes:
e7d973a31c24b ("spi: sprd: Add SPI driver for Spreadtrum SC9860")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Link: https://lore.kernel.org/r/20201106015035.139574-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Wed, 11 Nov 2020 04:13:26 +0000 (12:13 +0800)]
ASoC: wm8998: Fix PM disable depth imbalance on error
[ Upstream commit
193aa0a043645220d2a2f783ba06ae13d4601078 ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.
Fixes:
31833ead95c2c ("ASoC: arizona: Move request of speaker IRQs into bus probe")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20201111041326.1257558-4-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Wed, 11 Nov 2020 04:13:24 +0000 (12:13 +0800)]
ASoC: wm8994: Fix PM disable depth imbalance on error
[ Upstream commit
b8161cbe55a1892a19a318eaebbda92438fa708c ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.
Fixes:
57e265c8d71fb ("ASoC: wm8994: Move runtime PM init to platform device init")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20201111041326.1257558-2-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangbin Liu [Tue, 10 Nov 2020 01:50:12 +0000 (09:50 +0800)]
selftest/bpf: Add missed ip6ip6 test back
[ Upstream commit
58cfa49c2ba7f815adccc27a775e7cf8a8f7f539 ]
In comment
173ca26e9b51 ("samples/bpf: add comprehensive ipip, ipip6,
ip6ip6 test") we added ip6ip6 test for bpf tunnel testing. But in commit
933a741e3b82 ("selftests/bpf: bpf tunnel test.") when we moved it to
the current folder, we didn't add it.
This patch add the ip6ip6 test back to bpf tunnel test. Update the ipip6's
topology for both IPv4 and IPv6 testing. Since iperf test is removed as
currect framework simplified it in purpose, I also removed unused tcp
checkings in test_tunnel_kern.c.
Fixes:
933a741e3b82 ("selftests/bpf: bpf tunnel test.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201110015013.1570716-2-liuhangbin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangbin Liu [Wed, 28 Oct 2020 08:31:14 +0000 (16:31 +0800)]
selftests/run_kselftest.sh: fix dry-run typo
[ Upstream commit
93f20eff0cca972d74cb554a2e8b47730228be16 ]
Should be -d instead of -n for dry-run.
Fixes:
5da1918446a1 ("selftests/run_kselftest.sh: Make each test individually selectable")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Abhinav Kumar [Tue, 3 Nov 2020 01:10:23 +0000 (17:10 -0800)]
drm/msm/dp: do not notify audio subsystem if sink doesn't support audio
[ Upstream commit
e8c765811b1064c200829eacf237ac8c25e79cd0 ]
For sinks that do not support audio, there is no need to notify
audio subsystem of the connection event.
This will make sure that audio routes only to the primary display
when connected to such sinks.
changes in v2:
- Added fixes tag
- Removed nested if condition and removed usage of global pointer
Fixes:
d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM")
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuogee Hsieh [Tue, 3 Nov 2020 20:49:01 +0000 (12:49 -0800)]
drm/msm/dp: skip checking LINK_STATUS_UPDATED bit
[ Upstream commit
ea530388e64bd584645f2d89e40ca7dffade8eff ]
Some dongle will not clear LINK_STATUS_UPDATED bit after
DPCD read which cause link training failed. This patch
just read 6 bytes of DPCD link status from sink and return
without checking LINK_STATUS_UPDATED bit.
Only 8 bits are used to represent link rate at sinker DPCD.
The really link rate is 2.7Mb times the 8 bits value.
For example, 0x0A at DPCD is equal to 2.7Gb (10 * 2.7Mb).
This patch also convert 8 bits value of DPCD to really link
rate to fix worng link rate error during phy compliance test.
Fixes:
6625e2637d93 ("drm/msm/dp: DisplayPort PHY compliance tests fixup")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuogee Hsieh [Tue, 3 Nov 2020 22:53:35 +0000 (14:53 -0800)]
drm/msm/dp: return correct connection status after suspend
[ Upstream commit
19e52bcb27c2ba140699d2230d722366d7d048a1 ]
During suspend, dp host controller and hpd block are disabled due to
both ahb and aux clock are disabled. Therefore hpd plug/unplug interrupts
will not be generated. At dp_pm_resume(), reinitialize both dp host
controller and hpd block so that hpd plug/unplug interrupts will be
generated and handled by driver so that hpd connection state is updated
correctly. This patch will fix link training flaky issues.
Changes in v2:
-- use container_of to cast correct dp_display_private pointer
at both dp_pm_suspend() and dp_pm_resume().
Changes in v3:
-- replace hpd_state atomic_t with u32
Changes in v4
-- call dp_display_host_deinit() at dp_pm_suspend()
-- call dp_display_host_init() at msm_dp_display_enable()
-- fix phy->init_count unbalance which causes link training failed
Changes in v5
-- add Fixes tag
Fixes:
8ede2ecc3e5e (drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets)
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Mon, 26 Oct 2020 16:49:21 +0000 (17:49 +0100)]
firmware: tegra: fix strncpy()/strncat() confusion
[ Upstream commit
9294996f0be40e9da818ed891c82397ab63c00d0 ]
The way that bpmp_populate_debugfs_inband() uses strncpy()
and strncat() makes no sense since the size argument for
the first is insufficient to contain the trailing '/'
and the second passes the length of the input rather than
the output, which triggers a warning:
In function 'strncat',
inlined from 'bpmp_populate_debugfs_inband' at ../drivers/firmware/tegra/bpmp-debugfs.c:422:4:
include/linux/string.h:289:30: warning: '__builtin_strncat' specified bound depends on the length of the source argument [-Wstringop-overflow=]
289 | #define __underlying_strncat __builtin_strncat
| ^
include/linux/string.h:367:10: note: in expansion of macro '__underlying_strncat'
367 | return __underlying_strncat(p, q, count);
| ^~~~~~~~~~~~~~~~~~~~
drivers/firmware/tegra/bpmp-debugfs.c: In function 'bpmp_populate_debugfs_inband':
include/linux/string.h:288:29: note: length computed here
288 | #define __underlying_strlen __builtin_strlen
| ^
include/linux/string.h:321:10: note: in expansion of macro '__underlying_strlen'
321 | return __underlying_strlen(p);
Simplify this to use an snprintf() instead.
Fixes:
5e37b9c137ee ("firmware: tegra: Add support for in-band debug")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rob Clark [Tue, 10 Nov 2020 18:39:46 +0000 (10:39 -0800)]
drm/msm/a5xx: Clear shadow on suspend
[ Upstream commit
5771de5d5b3bfaf279e5c262a113d4b6fbe54355 ]
Similar to the previous patch, clear shadow on suspend to avoid timeouts
waiting for ringbuffer space.
Fixes:
8907afb476ac ("drm/msm: Allow a5xx to mark the RPTR shadow as privileged")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rob Clark [Tue, 10 Nov 2020 18:23:06 +0000 (10:23 -0800)]
drm/msm/a6xx: Clear shadow on suspend
[ Upstream commit
e8b0b994c3a5881f0648d53f90435120089c56ad ]
Clear the shadow rptr on suspend. Otherwise, when we resume, we can
have a stale value until CP_WHERE_AM_I executes. If we suspend near
the ringbuffer wraparound point, this can lead to a chicken/egg
situation where we are waiting for ringbuffer space to write the
CP_WHERE_AM_I (or CP_INIT) packet, because we mistakenly believe that
the ringbuffer is full (due to stale rptr value in the shadow).
Fixes errors like:
[drm:adreno_wait_ring [msm]] *ERROR* timeout waiting for space in ringbuffer 0
in the resume path.
Fixes:
d3a569fccfa0 ("drm/msm: a6xx: Use WHERE_AM_I for eligible targets")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tsuchiya Yuto [Wed, 28 Oct 2020 14:21:09 +0000 (23:21 +0900)]
mwifiex: fix mwifiex_shutdown_sw() causing sw reset failure
[ Upstream commit
fa74cb1dc0f4da46c441b735ca865ac52de42c0e ]
When a PCIe function level reset (FLR) is performed but without fw reset for
some reasons (e.g., on Microsoft Surface devices, fw reset requires other
quirks), it fails to reset wifi properly. You can trigger the issue on such
devices via debugfs entry for reset:
$ echo 1 | sudo tee /sys/kernel/debug/mwifiex/mlan0/reset
and the resulting dmesg log:
[ 45.740508] mwifiex_pcie 0000:03:00.0: Resetting per request
[ 45.742937] mwifiex_pcie 0000:03:00.0: info: successfully disconnected from [BSSID]: reason code 3
[ 45.744666] mwifiex_pcie 0000:03:00.0: info: shutdown mwifiex...
[ 45.751530] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
[ 45.751539] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
[ 45.771691] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
[ 45.771695] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
[ 45.771697] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
[ 45.771698] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
[ 45.771699] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
[ 45.771701] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
[ 45.771702] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
[ 45.771703] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
[ 45.771704] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
[ 45.771705] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
[ 45.771707] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
[ 45.771708] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
[ 53.099343] mwifiex_pcie 0000:03:00.0: info: trying to associate to '[SSID]' bssid [BSSID]
[ 53.241870] mwifiex_pcie 0000:03:00.0: info: associated to bssid [BSSID] successfully
[ 75.377942] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110
[ 85.385491] mwifiex_pcie 0000:03:00.0: info: successfully disconnected from [BSSID]: reason code 15
[ 87.539408] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110
[ 87.539412] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
[ 99.699917] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110
[ 99.699925] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
[ 111.859802] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110
[ 111.859808] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
[...]
When comparing mwifiex_shutdown_sw() with mwifiex_pcie_remove(), it
lacks mwifiex_init_shutdown_fw().
This commit fixes mwifiex_shutdown_sw() by adding the missing
mwifiex_init_shutdown_fw().
Fixes:
4c5dae59d2e9 ("mwifiex: add PCIe function level reset support")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201028142110.18144-2-kitakar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Dewar [Sat, 7 Nov 2020 08:16:29 +0000 (10:16 +0200)]
ath11k: Handle errors if peer creation fails
[ Upstream commit
c134d1f8c436d96b3f62896c630278e3ec001280 ]
ath11k_peer_create() is called without its return value being checked,
meaning errors will be unhandled. Add missing check and, as the mutex is
unconditionally unlocked on leaving this function, simplify the exit
path.
Addresses-Coverity-ID: 1497531 ("Code maintainability issues")
Fixes:
701e48a43e15 ("ath11k: add packet log support for QCA6390")
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201004100218.311653-1-alex.dewar90@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Thu, 5 Nov 2020 12:51:54 +0000 (15:51 +0300)]
ASoC: qcom: common: Fix refcounting in qcom_snd_parse_of()
[ Upstream commit
4e59dd249cd513a211e2ecce2cb31f4e29a5ce5b ]
There are two issues in this function.
1) We can't drop the refrences on "cpu", "codec" and "platform" before
we take the reference. This doesn't cause a problem on the first
iteration because those pointers start as NULL so the of_node_put()
is a no-op. But on the subsequent iterations, it will lead to a use
after free.
2) If the devm_kzalloc() allocation failed then the code returned
directly instead of cleaning up.
Fixes:
c1e6414cdc37 ("ASoC: qcom: common: Fix refcount imbalance on error")
Fixes:
1e36ea360ab9 ("ASoC: qcom: common: use modern dai_link style")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201105125154.GA176426@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Mon, 2 Nov 2020 14:58:35 +0000 (22:58 +0800)]
spi: imx: fix reference leak in two imx operations
[ Upstream commit
1dcbdd944824369d4569959f8130336fe6fe5f39 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in callers(spi_imx_prepare_message and
spi_imx_remove), so we should fix it.
Fixes:
525c9e5a32bd7 ("spi: imx: enable runtime pm support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201102145835.4765-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qinglang Miao [Tue, 3 Nov 2020 07:49:11 +0000 (15:49 +0800)]
spi: bcm63xx-hsspi: fix missing clk_disable_unprepare() on error in bcm63xx_hsspi_resume
[ Upstream commit
9bb9ef2b3e5d9d012876e7e2d7757eb30e865bee ]
Fix the missing clk_disable_unprepare() before return
from bcm63xx_hsspi_resume in the error handling case when
fails to prepare and enable bs->pll_clk.
Fixes:
0fd85869c2a9 ("spi/bcm63xx-hsspi: keep pll clk enabled")
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20201103074911.195530-1-miaoqinglang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Tue, 3 Nov 2020 14:13:06 +0000 (22:13 +0800)]
spi: tegra114: fix reference leak in tegra spi ops
[ Upstream commit
a042184c7fb99961ea083d4ec192614bec671969 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in two callers(tegra_spi_setup and
tegra_spi_resume), so we should fix it.
Fixes:
f333a331adfac ("spi/tegra114: add spi driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201103141306.5607-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Tue, 3 Nov 2020 14:13:23 +0000 (22:13 +0800)]
spi: tegra20-sflash: fix reference leak in tegra_sflash_resume
[ Upstream commit
3482e797ab688da6703fe18d8bad52f94199f4f2 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in tegra_sflash_resume, so we should fix it.
Fixes:
8528547bcc336 ("spi: tegra: add spi driver for sflash controller")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201103141323.5841-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Tue, 3 Nov 2020 14:13:45 +0000 (22:13 +0800)]
spi: tegra20-slink: fix reference leak in slink ops of tegra20
[ Upstream commit
763eab7074f6e71babd85d796156f05a675f9510 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in two callers(tegra_slink_setup and
tegra_slink_resume), so we should fix it.
Fixes:
dc4dc36056392 ("spi: tegra: add spi driver for SLINK controller")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201103141345.6188-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qinglang Miao [Tue, 3 Nov 2020 07:49:12 +0000 (15:49 +0800)]
spi: mt7621: fix missing clk_disable_unprepare() on error in mt7621_spi_probe
[ Upstream commit
702b15cb97123cedcec56a39d9a21c5288eb9ae1 ]
Fix the missing clk_disable_unprepare() before return
from mt7621_spi_probe in the error handling case.
Fixes:
cbd66c626e16 ("spi: mt7621: Move SPI driver out of staging")
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20201103074912.195576-1-miaoqinglang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Tue, 3 Nov 2020 14:09:47 +0000 (22:09 +0800)]
spi: spi-ti-qspi: fix reference leak in ti_qspi_setup
[ Upstream commit
45c0cba753641e5d7c3207f04241bd0e7a021698 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in ti_qspi_setup, so we should fix it.
Fixes:
505a14954e2d7 ("spi/qspi: Add qspi flash controller")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201103140947.3815-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Fri, 6 Nov 2020 01:53:57 +0000 (09:53 +0800)]
spi: stm32-qspi: fix reference leak in stm32 qspi operations
[ Upstream commit
88e1419b5ee30cc50e0c4d5265bdee1ba04af539 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in two callers(stm32_qspi_exec_op and
stm32_qspi_setup), so we should fix it.
Fixes:
9d282c17b023a ("spi: stm32-qspi: Add pm_runtime support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Link: https://lore.kernel.org/r/20201106015357.141235-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anant Thazhemadam [Fri, 16 Oct 2020 13:14:47 +0000 (18:44 +0530)]
Bluetooth: hci_h5: fix memory leak in h5_close
[ Upstream commit
855af2d74c870d747bf53509f8b2d7b9dc9ee2c3 ]
When h5_close() is called, h5 is directly freed when !hu->serdev.
However, h5->rx_skb is not freed, which causes a memory leak.
Freeing h5->rx_skb and setting it to NULL, fixes this memory leak.
Fixes:
ce945552fde4 ("Bluetooth: hci_h5: Add support for serdev enumerated devices")
Reported-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com
Tested-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sathish Narasimman [Thu, 29 Oct 2020 07:48:21 +0000 (13:18 +0530)]
Bluetooth: Fix: LL PRivacy BLE device fails to connect
[ Upstream commit
1fb17dfc258ff6208f7873cc7b8e40e27515d2d5 ]
When adding device to white list the device is added to resolving list
also. It has to be added only when HCI_ENABLE_LL_PRIVACY flag is set.
HCI_ENABLE_LL_PRIVACY flag has to be tested before adding/deleting devices
to resolving list. use_ll_privacy macro is used only to check if controller
supports LL_Privacy.
https://bugzilla.kernel.org/show_bug.cgi?id=209745
Fixes:
0eee35bdfa3b ("Bluetooth: Update resolving list when updating whitelist")
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anmol Karn [Wed, 30 Sep 2020 14:18:13 +0000 (19:48 +0530)]
Bluetooth: Fix null pointer dereference in hci_event_packet()
[ Upstream commit
6dfccd13db2ff2b709ef60a50163925d477549aa ]
AMP_MGR is getting derefernced in hci_phy_link_complete_evt(), when called
from hci_event_packet() and there is a possibility, that hcon->amp_mgr may
not be found when accessing after initialization of hcon.
- net/bluetooth/hci_event.c:4945
The bug seems to get triggered in this line:
bredr_hcon = hcon->amp_mgr->l2cap_conn->hcon;
Fix it by adding a NULL check for the hcon->amp_mgr before checking the ev-status.
Fixes:
d5e911928bd8 ("Bluetooth: AMP: Process Physical Link Complete evt")
Reported-and-tested-by: syzbot+0bef568258653cff272f@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=0bef568258653cff272f
Signed-off-by: Anmol Karn <anmol.karan123@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephen Boyd [Fri, 6 Nov 2020 18:23:33 +0000 (10:23 -0800)]
drm/panel: simple: Add flags to boe_nv133fhm_n61
[ Upstream commit
ab6fd5d44aa21ede9e566f89132f7bdda7f33093 ]
Reading the EDID of this panel shows that these flags should be set. Set
them so that we match what is in the EDID.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes:
b0c664cc80e8 ("panel: simple: Add BOE NV133FHM-N61")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106182333.3080124-1-swboyd@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paweł Chmiel [Sat, 7 Nov 2020 13:39:26 +0000 (14:39 +0100)]
arm64: dts: exynos: Correct psci compatible used on Exynos7
[ Upstream commit
e1e47fbca668507a81bb388fcae044b89d112ecc ]
It's not possible to reboot or poweroff Exynos7420 using PSCI. Instead
we need to use syscon reboot/poweroff drivers, like it's done for other
Exynos SoCs. This was confirmed by checking vendor source and testing it
on Samsung Galaxy S6 device based on this SoC.
To be able to use custom restart/poweroff handlers instead of PSCI
functions, we need to correct psci compatible. This also requires us to
provide function ids for CPU_ON and CPU_OFF.
Fixes:
fb026cb65247 ("arm64: dts: Add reboot node for exynos7")
Fixes:
b9024cbc937d ("arm64: dts: Add initial device tree support for exynos7")
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://lore.kernel.org/r/20201107133926.37187-2-pawel.mikolaj.chmiel@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paweł Chmiel [Sat, 7 Nov 2020 13:39:25 +0000 (14:39 +0100)]
arm64: dts: exynos: Include common syscon restart/poweroff for Exynos7
[ Upstream commit
73bc7510ea0dafb4ff1ae6808759627a8ec51f5a ]
Exynos7 uses the same syscon reboot and poweroff nodes as other Exynos
SoCs, so instead of duplicating code we can just include common dtsi
file, which already contains definitions of them. After this change,
poweroff node will be also available, previously this dts file did
contain only reboot node.
Fixes:
fb026cb65247 ("arm64: dts: Add reboot node for exynos7")
Fixes:
b9024cbc937d ("arm64: dts: Add initial device tree support for exynos7")
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://lore.kernel.org/r/20201107133926.37187-1-pawel.mikolaj.chmiel@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Seung-Woo Kim [Wed, 28 Oct 2020 01:52:47 +0000 (10:52 +0900)]
brcmfmac: Fix memory leak for unpaired brcmf_{alloc/free}
[ Upstream commit
9db946284e07bb27309dd546b7fee528664ba82a ]
There are missig brcmf_free() for brcmf_alloc(). Fix memory leak
by adding missed brcmf_free().
Reported-by: Jaehoon Chung <jh80.chung@samsung.com>
Fixes:
a1f5aac1765a ("brcmfmac: don't realloc wiphy during PCIe reset")
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1603849967-22817-1-git-send-email-sw0312.kim@samsung.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Karthikeyan Periyasamy [Wed, 4 Nov 2020 17:47:00 +0000 (23:17 +0530)]
ath11k: fix wmi init configuration
[ Upstream commit
36c7c640ffeb87168e5ff79b7a36ae3a020bd378 ]
Assign the correct hw_op ath11k_init_wmi_config_ipq8074 to
the hw IPQ8074. Also update the correct TWT radio count.
Incorrect TWT radio count cause TWT feature fails on radio2
because physical device count is hardcoded to 2. so set
the value dynamically.
Found this during code review.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Fixes:
2d4bcbed5b7d53e1 ("ath11k: initialize wmi config based on hw_params")
Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1604512020-25197-1-git-send-email-periyasa@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Eckelmann [Fri, 30 Oct 2020 10:19:40 +0000 (11:19 +0100)]
ath11k: Fix number of rules in filtered ETSI regdomain
[ Upstream commit
6189be7d145c3a2d48514eb8755483602ff5a4b4 ]
The ath11k code will try to insert wheather rader related limits when the
DFS region is set to ETSI. For this reason, it will add two more entries in
the array of reg_rules. But the 2.4.0.1 firmware is prefiltering the list
of reg rules it returns for 2.4GHz PHYs. They will then not contain the
list of 5GHz rules and thus no wheather radar band rules were inserted by
this code.
But the code didn't fix the n_reg_rules for this regulatory domain and PHY
when this happened. This resulted in a rejection by is_valid_rd because it
found rules which start and end at 0khz. This resulted in a splat like:
Invalid regulatory domain detected
------------[ cut here ]------------
WARNING: at backports-
20200628-4.4.60-
9a94b73e75/net/wireless/reg.c:3721
[...]
ath11k c000000.wifi1: failed to perform regd update : -22
The number of rules must therefore be saved after they were converted from
the ath11k format to the ieee80211_regdomain format and not before.
Tested with IPQ8074 WLAN.HK.2.4.0.1.r1-00019-QCAHKSWPL_SILICONZ-1
Fixes:
d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201030101940.2387952-1-sven@narfation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Eckelmann [Wed, 21 Oct 2020 14:05:55 +0000 (16:05 +0200)]
ath11k: Initialize complete alpha2 for regulatory change
[ Upstream commit
383a32cde4172db19d4743d4c782c00af39ff275 ]
The function ath11k_wmi_send_init_country_cmd is taking 3 byte from alpha2
of the structure wmi_init_country_params. But the function
ath11k_reg_notifier is only initializing 2 bytes. The third byte is
therefore always an uninitialized value.
The command can happen to look like
0c 00 87 02 01 00 00 00 00 00 00 00 43 41 f8 00
instead of
0c 00 87 02 01 00 00 00 00 00 00 00 43 41 00 00
Tested-on: IPQ8074 hw2.0 WLAN.HK.2.1.0.1-01161-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Tested-on: IPQ8074 hw2.0 WLAN.HK.2.4.0.1.r1-00019-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 WLAN.HK.2.4.0.1.r1-00026-QCAHKSWPL_SILICONZ-2
Fixes:
d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201021140555.4114715-1-sven@narfation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lyude Paul [Thu, 5 Nov 2020 23:57:02 +0000 (18:57 -0500)]
drm/edid: Fix uninitialized variable in drm_cvt_modes()
[ Upstream commit
991fcb77f490390bcad89fa67d95763c58cdc04c ]
Noticed this when trying to compile with -Wall on a kernel fork. We
potentially don't set width here, which causes the compiler to complain
about width potentially being uninitialized in drm_cvt_modes(). So, let's
fix that.
Changes since v1:
* Don't emit an error as this code isn't reachable, just mark it as such
Changes since v2:
* Remove now unused variable
Fixes:
3f649ab728cd ("treewide: Remove uninitialized_var() usage")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105235703.1328115-1-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhen Lei [Fri, 6 Nov 2020 14:12:16 +0000 (22:12 +0800)]
x86/mce: Correct the detection of invalid notifier priorities
[ Upstream commit
15af36596ae305aefc8c502c2d3e8c58221709eb ]
Commit
c9c6d216ed28 ("x86/mce: Rename "first" function as "early"")
changed the enumeration of MCE notifier priorities. Correct the check
for notifier priorities to cover the new range.
[ bp: Rewrite commit message, remove superfluous brackets in
conditional. ]
Fixes:
c9c6d216ed28 ("x86/mce: Rename "first" function as "early"")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201106141216.2062-2-thunder.leizhen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
KP Singh [Fri, 6 Nov 2020 10:37:44 +0000 (10:37 +0000)]
bpf: Fix tests for local_storage
[ Upstream commit
f0e5ba0bc481df77cf0afac2b33e420b33eeb463 ]
The {inode,sk}_storage_result checking if the correct value was retrieved
was being clobbered unconditionally by the return value of the
bpf_{inode,sk}_storage_delete call.
Also, consistently use the newly added BPF_LOCAL_STORAGE_GET_F_CREATE
flag.
Fixes:
cd324d7abb3d ("bpf: Add selftests for local_storage")
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201106103747.2780972-7-kpsingh@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Fri, 6 Nov 2020 01:52:17 +0000 (09:52 +0800)]
spi: stm32: fix reference leak in stm32_spi_resume
[ Upstream commit
900ccdcb79bb61471df1566a70b2b39687a628d5 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in stm32_spi_resume, so we should fix it.
Fixes:
db96bf976a4fc ("spi: stm32: fixes suspend/resume management")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/20201106015217.140476-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Thu, 29 Oct 2020 22:24:07 +0000 (22:24 +0000)]
nl80211/cfg80211: fix potential infinite loop
[ Upstream commit
ba5c25236bc3d399df82ebe923490ea8d2d35cf2 ]
The for-loop iterates with a u8 loop counter and compares this
with the loop upper limit of request->n_ssids which is an int type.
There is a potential infinite loop if n_ssids is larger than the
u8 loop counter, so fix this by making the loop counter an int.
Addresses-Coverity: ("Infinite loop")
Fixes:
c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201029222407.390218-1-colin.king@canonical.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Moore [Tue, 3 Nov 2020 16:49:38 +0000 (11:49 -0500)]
selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling
[ Upstream commit
200ea5a2292dc444a818b096ae6a32ba3caa51b9 ]
A previous fix, commit
83370b31a915 ("selinux: fix error initialization
in inode_doinit_with_dentry()"), changed how failures were handled
before a SELinux policy was loaded. Unfortunately that patch was
potentially problematic for two reasons: it set the isec->initialized
state without holding a lock, and it didn't set the inode's SELinux
label to the "default" for the particular filesystem. The later can
be a problem if/when a later attempt to revalidate the inode fails
and SELinux reverts to the existing inode label.
This patch should restore the default inode labeling that existed
before the original fix, without affecting the LABEL_INVALID marking
such that revalidation will still be attempted in the future.
Fixes:
83370b31a915 ("selinux: fix error initialization in inode_doinit_with_dentry()")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Horia Geantă [Sun, 1 Nov 2020 20:05:53 +0000 (22:05 +0200)]
crypto: caam - fix printing on xts fallback allocation error path
[ Upstream commit
ab95bd2aa904e4f53b7358efeea1d57693fb7889 ]
At the time xts fallback tfm allocation fails the device struct
hasn't been enabled yet in the caam xts tfm's private context.
Fix this by using the device struct from xts algorithm's private context
or, when not available, by replacing dev_err with pr_err.
Fixes:
9d9b14dbe077 ("crypto: caam/jr - add fallback for XTS with more than 8B IV")
Fixes:
83e8aa912138 ("crypto: caam/qi - add fallback for XTS with more than 8B IV")
Fixes:
36e2d7cfdcf1 ("crypto: caam/qi2 - add fallback for XTS with more than 8B IV")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Horia Geantă [Wed, 28 Oct 2020 09:03:20 +0000 (11:03 +0200)]
crypto: arm/aes-neonbs - fix usage of cbc(aes) fallback
[ Upstream commit
a2715fbdc6fc387e85211df917a4778761ec693d ]
Loading the module deadlocks since:
-local cbc(aes) implementation needs a fallback and
-crypto API tries to find one but the request_module() resolves back to
the same module
Fix this by changing the module alias for cbc(aes) and
using the NEED_FALLBACK flag when requesting for a fallback algorithm.
Fixes:
00b99ad2bac2 ("crypto: arm/aes-neonbs - Use generic cbc encryption path")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ard Biesheuvel [Mon, 26 Oct 2020 23:00:27 +0000 (00:00 +0100)]
crypto: arm64/poly1305-neon - reorder PAC authentication with SP update
[ Upstream commit
519a0d7e495a6d3ce62594e485aea2a3a4a2ca0a ]
PAC pointer authentication signs the return address against the value
of the stack pointer, to prevent stack overrun exploits from corrupting
the control flow. However, this requires that the AUTIASP is issued with
SP holding the same value as it held when the PAC value was generated.
The Poly1305 NEON code got this wrong, resulting in crashes on PAC
capable hardware.
Fixes:
f569ca164751 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS ...")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Mon, 2 Nov 2020 14:30:24 +0000 (22:30 +0800)]
drm/bridge: tpd12s015: Fix irq registering in tpd12s015_probe
[ Upstream commit
c2530cc9610d84a5a0118ba40d0f09309605047f ]
gpiod_to_irq() return negative value in case of error,
the existing code doesn't handle negative error codes.
If the HPD gpio supports IRQs (gpiod_to_irq returns a
valid number), we use the IRQ. If it doesn't (gpiod_to_irq
returns an error), it gets polled via detect().
Fixes:
cff5e6f7e83f ("drm/bridge: Add driver for the TI TPD12S015 HDMI level shifter")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102143024.26216-1-yuehaibing@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cezary Rojewski [Mon, 26 Oct 2020 10:01:29 +0000 (11:01 +0100)]
ASoC: pcm: DRAIN support reactivation
[ Upstream commit
4c22b80f61540ea99d9b4af0127315338755f05b ]
soc-pcm's dpcm_fe_dai_do_trigger() supported DRAIN commnad up to kernel
v5.4 where explicit switch(cmd) has been introduced which takes into
account all SNDRV_PCM_TRIGGER_xxx but SNDRV_PCM_TRIGGER_DRAIN. Update
switch statement to reactive support for it.
As DRAIN is somewhat unique by lacking negative/stop counterpart, bring
behaviour of dpcm_fe_dai_do_trigger() for said command back to its
pre-v5.4 state by adding it to START/RESUME/PAUSE_RELEASE group.
Fixes:
acbf27746ecf ("ASoC: pcm: update FE/BE trigger order based on the command")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201026100129.8216-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
He Zhe [Wed, 28 Oct 2020 10:39:21 +0000 (18:39 +0800)]
pinctrl: core: Add missing #ifdef CONFIG_GPIOLIB
[ Upstream commit
b507cb92477ad85902783a183c5ce01d16296687 ]
To fix the following build warnings when CONFIG_GPIOLIB=n.
drivers/pinctrl/core.c:1607:20: warning: unused variable 'chip' [-Wunused-variable]
1608 | struct gpio_chip *chip;
| ^~~~
drivers/pinctrl/core.c:1606:15: warning: unused variable 'gpio_num' [-Wunused-variable]
1607 | unsigned int gpio_num;
| ^~~~~~~~
drivers/pinctrl/core.c:1605:29: warning: unused variable 'range' [-Wunused-variable]
1606 | struct pinctrl_gpio_range *range;
| ^~~~~
Fixes:
f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file")
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201028103921.22486-1-zhe.he@windriver.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Fri, 30 Oct 2020 16:44:19 +0000 (17:44 +0100)]
scsi: aacraid: Improve compat_ioctl handlers
[ Upstream commit
077054215a7f787e389a807ece8a39247abbbc1e ]
The use of compat_alloc_user_space() can be easily replaced by handling
compat arguments in the regular handler, and this will make it work for
big-endian kernels as well, which at the moment get an invalid indirect
pointer argument.
Calling aac_ioctl() instead of aac_compat_do_ioctl() means the compat and
native code paths behave the same way again, which they stopped when the
adapter health check was added only in the native function.
Link: https://lore.kernel.org/r/20201030164450.1253641-1-arnd@kernel.org
Fixes:
572ee53a9bad ("scsi: aacraid: check adapter health")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Tue, 3 Nov 2020 14:09:10 +0000 (22:09 +0800)]
spi: spi-mem: fix reference leak in spi_mem_access_start
[ Upstream commit
c02bb16b0e826bf0e19aa42c3ae60ea339f32cf5 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in spi_mem_access_start, so we should fix it.
Fixes:
f86c24f479530 ("spi: spi-mem: Split spi_mem_exec_op() code")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201103140910.3482-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Tue, 27 Oct 2020 10:23:04 +0000 (13:23 +0300)]
drm/msm/dpu: fix clock scaling on non-sc7180 board
[ Upstream commit
cccdeda362fafd0613b571affe7199eb7d8f3fba ]
c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for
display") has added support for handling bandwidth voting in kms path in
addition to old mdss path. However this broke all other platforms since
_dpu_core_perf_crtc_update_bus() will now error out instead of properly
calculating bandwidth and core clocks. Fix
_dpu_core_perf_crtc_update_bus() to just skip bandwidth setting instead
of returning an error in case kms->num_paths == 0 (MDSS is used for
bandwidth management).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes:
c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display")
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Thu, 15 Oct 2020 19:03:30 +0000 (22:03 +0300)]
drm/msm/dsi_pll_10nm: restore VCO rate during restore_state
[ Upstream commit
a4ccc37693a271330a46208afbeaed939d54fdbb ]
PHY disable/enable resets PLL registers to default values. Thus in
addition to restoring several registers we also need to restore VCO rate
settings.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes:
c6659785dfb3 ("drm/msm/dsi/pll: call vco set rate explicitly")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Thu, 15 Oct 2020 19:03:29 +0000 (22:03 +0300)]
drm/msm/dsi_pll_7nm: restore VCO rate during restore_state
[ Upstream commit
5047ab95bb7db0e7b2ecfd5e9bcafc7fd822c652 ]
PHY disable/enable resets PLL registers to default values. Thus in
addition to restoring several registers we also need to restore VCO rate
settings.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes:
1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tanmay Shah [Sat, 26 Sep 2020 04:50:48 +0000 (21:50 -0700)]
drm/msm/dp: DisplayPort PHY compliance tests fixup
[ Upstream commit
6625e2637d93d2f52ef0d17656f21bfa2cb4983a ]
Bandwidth code was being used as test link rate. Fix this by converting
bandwidth code to test link rate
Do not reset voltage and pre-emphasis level during IRQ HPD attention
interrupt. Also fix pre-emphasis parsing during test link status process
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
Fixes:
8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Namhyung Kim [Tue, 27 Oct 2020 07:28:54 +0000 (16:28 +0900)]
perf test: Use generic event for expand_libpfm_events()
[ Upstream commit
9b0a7836359443227c9af101f7aea8412e739458 ]
I found that the UNHALTED_CORE_CYCLES event is only available in the
Intel machines and it makes other vendors/archs fail on the test. As
libpfm4 can parse the generic events like cycles, let's use them.
Fixes:
40b74c30ffb9 ("perf test: Add expand cgroup event test")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jason Gunthorpe [Mon, 26 Oct 2020 13:19:31 +0000 (15:19 +0200)]
RDMA/mlx5: Fix corruption of reg_pages in mlx5_ib_rereg_user_mr()
[ Upstream commit
fc3325701a6353594083f08e297d4c1965c601aa ]
reg_pages should always contain mr->npage since when the mr is finally
de-reg'd it is always subtracted out.
If there were any error exits then mlx5_ib_rereg_user_mr() would leave the
reg_pages adjusted and this will cause it to be double subtracted
eventually.
The manipulation of reg_pages is inherently connected to the umem, so lift
it out of set_mr_fields() and only adjust it around creating/destroying a
umem.
reg_pages is only used for diagnostics in sysfs.
Fixes:
7d0cc6edcc70 ("IB/mlx5: Add MR cache for large UMR regions")
Link: https://lore.kernel.org/r/20201026131936.1335664-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jaegeuk Kim [Sun, 25 Oct 2020 14:35:47 +0000 (07:35 -0700)]
f2fs: call f2fs_get_meta_page_retry for nat page
[ Upstream commit
3acc4522d89e0a326db69e9d0afaad8cf763a54c ]
When running fault injection test, if we don't stop checkpoint, some stale
NAT entries were flushed which breaks consistency.
Fixes:
86f33603f8c5 ("f2fs: handle errors of f2fs_get_meta_page_nofail")
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Mon, 2 Nov 2020 14:56:51 +0000 (22:56 +0800)]
spi: img-spfi: fix reference leak in img_spfi_resume
[ Upstream commit
ee5558a9084584015c8754ffd029ce14a5827fa8 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in img_spfi_resume, so we should fix it.
Fixes:
deba25800a12b ("spi: Add driver for IMG SPFI controller")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201102145651.3875-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jordan Niethe [Wed, 14 Oct 2020 07:28:36 +0000 (18:28 +1100)]
powerpc/64: Set up a kernel stack for secondaries before cpu_restore()
[ Upstream commit
3c0b976bf20d236c57adcefa80f86a0a1d737727 ]
Currently in generic_secondary_smp_init(), cur_cpu_spec->cpu_restore()
is called before a stack has been set up in r1. This was previously fine
as the cpu_restore() functions were implemented in assembly and did not
use a stack. However commit
5a61ef74f269 ("powerpc/64s: Support new
device tree binding for discovering CPU features") used
__restore_cpu_cpufeatures() as the cpu_restore() function for a
device-tree features based cputable entry. This is a C function and
hence uses a stack in r1.
generic_secondary_smp_init() is entered on the secondary cpus via the
primary cpu using the OPAL call opal_start_cpu(). In OPAL, each hardware
thread has its own stack. The OPAL call is ran in the primary's hardware
thread. During the call, a job is scheduled on a secondary cpu that will
start executing at the address of generic_secondary_smp_init(). Hence
the value that will be left in r1 when the secondary cpu enters the
kernel is part of that secondary cpu's individual OPAL stack. This means
that __restore_cpu_cpufeatures() will write to that OPAL stack. This is
not horribly bad as each hardware thread has its own stack and the call
that enters the kernel from OPAL never returns, but it is still wrong
and should be corrected.
Create the temp kernel stack before calling cpu_restore().
As noted by mpe, for a kexec boot, the secondary CPUs are released from
the spin loop at address 0x60 by smp_release_cpus() and then jump to
generic_secondary_smp_init(). The call to smp_release_cpus() is in
setup_arch(), and it comes before the call to emergency_stack_init().
emergency_stack_init() allocates an emergency stack in the PACA for each
CPU. This address in the PACA is what is used to set up the temp kernel
stack in generic_secondary_smp_init(). Move releasing the secondary CPUs
to after the PACAs have been allocated an emergency stack, otherwise the
PACA stack pointer will contain garbage and hence the temp kernel stack
created from it will be broken.
Fixes:
5a61ef74f269 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201014072837.24539-1-jniethe5@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Mon, 26 Oct 2020 21:00:32 +0000 (22:00 +0100)]
drm/amdgpu: fix build_coefficients() argument
[ Upstream commit
dbb60031dd0c2b85f10ce4c12ae604c28d3aaca4 ]
gcc -Wextra warns about a function taking an enum argument
being called with a bool:
drivers/gpu/drm/amd/amdgpu/../display/modules/color/color_gamma.c: In function 'apply_degamma_for_user_regamma':
drivers/gpu/drm/amd/amdgpu/../display/modules/color/color_gamma.c:1617:29: warning: implicit conversion from 'enum <anonymous>' to 'enum dc_transfer_func_predefined' [-Wenum-conversion]
1617 | build_coefficients(&coeff, true);
It appears that a patch was added using the old calling conventions
after the type was changed, and the value should actually be 0
(TRANSFER_FUNCTION_SRGB) here instead of 1 (true).
Fixes:
55a01d4023ce ("drm/amd/display: Add user_regamma to color module")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vijay Khemka [Thu, 13 Aug 2020 19:04:30 +0000 (12:04 -0700)]
ARM: dts: aspeed: tiogapass: Remove vuart
[ Upstream commit
14f100c00f1e35e5890340d4c6a64bda5dff4320 ]
Removed vuart for facebook tiogapass platform as it uses uart2 and
uart3 pin with aspeed uart routing feature.
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Fixes:
ffdbf494821d ("ARM: dts: aspeed: tiogapass: Enable VUART")
Link: https://lore.kernel.org/r/20200813190431.3331026-1-vijaykhemka@fb.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robin Murphy [Mon, 26 Oct 2020 12:48:37 +0000 (12:48 +0000)]
drm/msm: Add missing stub definition
[ Upstream commit
a0b21e0ad29420b04911a98d360b9586168eeae5 ]
DRM_MSM fails to build with DRM_MSM_DP=n; add the missing stub.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Fixes:
8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Clément Péron [Fri, 30 Oct 2020 14:46:34 +0000 (15:46 +0100)]
ASoC: sun4i-i2s: Fix lrck_period computation for I2S justified mode
[ Upstream commit
93c0210671d8f3ec2262da703fab93a1497158a8 ]
Left and Right justified mode are computed using the same formula
as DSP_A and DSP_B mode.
Which is wrong and the user manual explicitly says:
LRCK_PERDIOD:
PCM Mode: Number of BCLKs within (Left + Right) channel width.
I2S/Left-Justified/Right-Justified Mode: Number of BCLKs within each
individual channel width(Left or Right)
Fix this by using the same formula as the I2S mode.
Fixes:
7ae7834ec446 ("ASoC: sun4i-i2s: Add support for DSP formats")
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201030144648.397824-2-peron.clem@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Sat, 10 Oct 2020 16:47:36 +0000 (17:47 +0100)]
crypto: inside-secure - Fix sizeof() mismatch
[ Upstream commit
c98e233062cd9d0e2f10e445a671f0799daaef67 ]
An incorrect sizeof() is being used, sizeof(priv->ring[i].rdr_req) is
not correct, it should be sizeof(*priv->ring[i].rdr_req). Note that
since the size of ** is the same size as * this is not causing any
issues.
Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")
Fixes:
9744fec95f06 ("crypto: inside-secure - remove request list to improve performance")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Thu, 8 Oct 2020 09:34:56 +0000 (09:34 +0000)]
crypto: talitos - Fix return type of current_desc_hdr()
[ Upstream commit
0237616173fd363a54bd272aa3bd376faa1d7caa ]
current_desc_hdr() returns a u32 but in fact this is a __be32,
leading to a lot of sparse warnings.
Change the return type to __be32 and ensure it is handled as
sure by the caller.
Fixes:
3e721aeb3df3 ("crypto: talitos - handle descriptor not found in error path")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Thu, 8 Oct 2020 09:34:55 +0000 (09:34 +0000)]
crypto: talitos - Endianess in current_desc_hdr()
[ Upstream commit
195404db27f9533c71fdcb78d32a77075c2cb4a2 ]
current_desc_hdr() compares the value of the current descriptor
with the next_desc member of the talitos_desc struct.
While the current descriptor is obtained from in_be32() which
return CPU ordered bytes, next_desc member is in big endian order.
Convert the current descriptor into big endian before comparing it
with next_desc.
This fixes a sparse warning.
Fixes:
37b5e8897eb5 ("crypto: talitos - chain in buffered data for ahash on SEC1")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Mon, 26 Oct 2020 21:00:30 +0000 (22:00 +0100)]
drm/amdgpu: fix incorrect enum type
[ Upstream commit
a110f3750bf8b93764f13bd1402c7cba03d15d61 ]
core_link_write_dpcd() returns enum dc_status, not ddc_result:
display/dc/core/dc_link_dp.c: In function 'dp_set_panel_mode':
display/dc/core/dc_link_dp.c:4237:11: warning: implicit conversion from 'enum dc_status' to 'enum ddc_result'
[-Wenum-conversion]
Avoid the warning by using the correct enum in the caller.
Fixes:
0b226322434c ("drm/amd/display: Synchronous DisplayPort Link Training")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Gleixner [Tue, 20 Oct 2020 14:46:55 +0000 (16:46 +0200)]
sched: Reenable interrupts in do_sched_yield()
[ Upstream commit
345a957fcc95630bf5535d7668a59ed983eb49a7 ]
do_sched_yield() invokes schedule() with interrupts disabled which is
not allowed. This goes back to the pre git era to commit
a6efb709806c
("[PATCH] irqlock patch 2.5.27-H6") in the history tree.
Reenable interrupts and remove the misleading comment which "explains" it.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/87r1pt7y5c.fsf@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peng Liu [Thu, 8 Oct 2020 15:49:42 +0000 (23:49 +0800)]
sched/deadline: Fix sched_dl_global_validate()
[ Upstream commit
a57415f5d1e43c3a5c5d412cd85e2792d7ed9b11 ]
When change sched_rt_{runtime, period}_us, we validate that the new
settings should at least accommodate the currently allocated -dl
bandwidth:
sched_rt_handler()
--> sched_dl_bandwidth_validate()
{
new_bw = global_rt_runtime()/global_rt_period();
for_each_possible_cpu(cpu) {
dl_b = dl_bw_of(cpu);
if (new_bw < dl_b->total_bw) <-------
ret = -EBUSY;
}
}
But under CONFIG_SMP, dl_bw is per root domain , but not per CPU,
dl_b->total_bw is the allocated bandwidth of the whole root domain.
Instead, we should compare dl_b->total_bw against "cpus*new_bw",
where 'cpus' is the number of CPUs of the root domain.
Also, below annotation(in kernel/sched/sched.h) implied implementation
only appeared in SCHED_DEADLINE v2[1], then deadline scheduler kept
evolving till got merged(v9), but the annotation remains unchanged,
meaningless and misleading, update it.
* With respect to SMP, the bandwidth is given on a per-CPU basis,
* meaning that:
* - dl_bw (< 100%) is the bandwidth of the system (group) on each CPU;
* - dl_total_bw array contains, in the i-eth element, the currently
* allocated bandwidth on the i-eth CPU.
[1]: https://lore.kernel.org/lkml/
1267385230.13676.101.camel@Palantir/
Fixes:
332ac17ef5bf ("sched/deadline: Add bandwidth management for SCHED_DEADLINE tasks")
Signed-off-by: Peng Liu <iwtbavbm@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/db6bbda316048cda7a1bbc9571defde193a8d67e.1602171061.git.iwtbavbm@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Wed, 28 Oct 2020 11:51:12 +0000 (11:51 +0000)]
ASoC: qcom: fix unsigned int bitwidth compared to less than zero
[ Upstream commit
bcc96dc3cf8048c80af7c487af17e19be27ac57d ]
The check for an error return from the call to snd_pcm_format_width
is never true as the unsigned int bitwidth can never be less than
zero. Fix this by making bitwidth an int.
Fixes:
7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201028115112.109017-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Woodhouse [Sat, 24 Oct 2020 21:35:01 +0000 (22:35 +0100)]
x86/apic: Fix x2apic enablement without interrupt remapping
[ Upstream commit
26573a97746c7a99f394f9d398ce91a8853b3b89 ]
Currently, Linux as a hypervisor guest will enable x2apic only if there are
no CPUs present at boot time with an APIC ID above 255.
Hotplugging a CPU later with a higher APIC ID would result in a CPU which
cannot be targeted by external interrupts.
Add a filter in x2apic_apic_id_valid() which can be used to prevent such
CPUs from coming online, and allow x2apic to be enabled even if they are
present at boot time.
Fixes:
ce69a784504 ("x86/apic: Enable x2APIC without interrupt remapping under KVM")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-2-dwmw2@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guoqing Jiang [Fri, 23 Oct 2020 07:43:46 +0000 (09:43 +0200)]
RDMA/rtrs-srv: Don't guard the whole __alloc_srv with srv_mutex
[ Upstream commit
d715ff8acbd5876549ef2b21b755ed919f40dcc1 ]
The purpose of srv_mutex is to protect srv_list as in put_srv, so no need
to hold it when allocate memory for srv since it could be time consuming.
Otherwise if one machine has limited memory, rsrv_close_work could be
blocked for a longer time due to the mutex is held by get_or_create_srv
since it can't get memory in time.
INFO: task kworker/1:1:27478 blocked for more than 120 seconds.
Tainted: G O 4.14.171-1-storage #4.14.171-1.3~deb9
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/1:1 D 0 27478 2 0x80000000
Workqueue: rtrs_server_wq rtrs_srv_close_work [rtrs_server]
Call Trace:
? __schedule+0x38c/0x7e0
schedule+0x32/0x80
schedule_preempt_disabled+0xa/0x10
__mutex_lock.isra.2+0x25e/0x4d0
? put_srv+0x44/0x100 [rtrs_server]
put_srv+0x44/0x100 [rtrs_server]
rtrs_srv_close_work+0x16c/0x280 [rtrs_server]
process_one_work+0x1c5/0x3c0
worker_thread+0x47/0x3e0
kthread+0xfc/0x130
? trace_event_raw_event_workqueue_execute_start+0xa0/0xa0
? kthread_create_on_node+0x70/0x70
ret_from_fork+0x1f/0x30
Let's move all the logics from __find_srv_and_get and __alloc_srv to
get_or_create_srv, and remove the two functions. Then it should be safe
for multiple processes to access the same srv since it is protected with
srv_mutex.
And since we don't want to allocate chunks with srv_mutex held, let's
check the srv->refcount after get srv because the chunks could not be
allocated yet.
Fixes:
9cb837480424 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201023074353.21946-6-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gioh Kim [Fri, 23 Oct 2020 07:43:45 +0000 (09:43 +0200)]
RDMA/rtrs-clt: Missing error from rtrs_rdma_conn_established
[ Upstream commit
f553e7601df9566ba7644541fc09152a3a81f793 ]
When rtrs_rdma_conn_established returns error (non-zero value), the error
value is stored in con->cm_err and it cannot trigger
rtrs_rdma_error_recovery. Finally the error of rtrs_rdma_con_established
will be forgot.
Fixes:
6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20201023074353.21946-5-jinpu.wang@cloud.ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Danil Kipnis [Fri, 23 Oct 2020 07:43:42 +0000 (09:43 +0200)]
RDMA/rtrs-clt: Remove destroy_con_cq_qp in case route resolving failed
[ Upstream commit
2b3062e4d997f201c1ad2bbde88b7271dd9ef35f ]
We call destroy_con_cq_qp(con) in rtrs_rdma_addr_resolved() in case route
couldn't be resolved and then again in create_cm() because nothing
happens.
Don't call destroy_con_cq_qp from rtrs_rdma_addr_resolved, create_cm()
does the clean up already.
Fixes:
6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20201023074353.21946-2-jinpu.wang@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ard Biesheuvel [Sun, 20 Sep 2020 22:10:16 +0000 (00:10 +0200)]
ARM: p2v: fix handling of LPAE translation in BE mode
[ Upstream commit
4e79f0211b473f8e1eab8211a9fd50cc41a3a061 ]
When running in BE mode on LPAE hardware with a PA-to-VA translation
that exceeds 4 GB, we patch bits 39:32 of the offset into the wrong
byte of the opcode. So fix that, by rotating the offset in r0 to the
right by 8 bits, which will put the 8-bit immediate in bits 31:24.
Note that this will also move bit #22 in its correct place when
applying the rotation to the constant #0x400000.
Fixes:
d9a790df8e984 ("ARM: 7883/1: fix mov to mvn conversion in case of 64 bit phys_addr_t and BE")
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arvind Sankar [Tue, 27 Oct 2020 23:06:48 +0000 (19:06 -0400)]
x86/mm/ident_map: Check for errors from ident_pud_init()
[ Upstream commit
1fcd009102ee02e217f2e7635ab65517d785da8e ]
Commit
ea3b5e60ce80 ("x86/mm/ident_map: Add 5-level paging support")
added ident_p4d_init() to support 5-level paging, but this function
doesn't check and return errors from ident_pud_init().
For example, the decompressor stub uses this code to create an identity
mapping. If it runs out of pages while trying to allocate a PMD
pagetable, the error will be currently ignored.
Fix this to propagate errors.
[ bp: Space out statements for better readability. ]
Fixes:
ea3b5e60ce80 ("x86/mm/ident_map: Add 5-level paging support")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lkml.kernel.org/r/20201027230648.1885111-1-nivedita@alum.mit.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bob Pearson [Tue, 13 Oct 2020 17:07:42 +0000 (12:07 -0500)]
RDMA/rxe: Compute PSN windows correctly
[ Upstream commit
bb3ab2979fd69db23328691cb10067861df89037 ]
The code which limited the number of unacknowledged PSNs was incorrect.
The PSNs are limited to 24 bits and wrap back to zero from 0x00ffffff.
The test was computing a 32 bit value which wraps at 32 bits so that
qp->req.psn can appear smaller than the limit when it is actually larger.
Replace '>' test with psn_compare which is used for other PSN comparisons
and correctly handles the 24 bit size.
Fixes:
8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20201013170741.3590-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jing Xiangfeng [Fri, 16 Oct 2020 07:58:45 +0000 (15:58 +0800)]
RDMA/core: Fix error return in _ib_modify_qp()
[ Upstream commit
5333499c6014224756e97fa1a1047dfa592d76d3 ]
Fix to return error code PTR_ERR() from the error handling case instead of
0.
Fixes:
51aab12631dd ("RDMA/core: Get xmit slave for LAG")
Link: https://lore.kernel.org/r/20201016075845.129562-1-jingxiangfeng@huawei.com
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joel Stanley [Tue, 22 Sep 2020 06:42:34 +0000 (16:12 +0930)]
ARM: dts: aspeed: s2600wf: Fix VGA memory region location
[ Upstream commit
9e1cc9679776f5b9e42481d392b1550753ebd084 ]
The VGA memory region is always from the top of RAM. On this board, that
is 0x80000000 + 0x20000000 - 0x01000000 = 0x9f000000.
This was not an issue in practice as the region is "reserved" by the
vendor's u-boot reducing the amount of available RAM, and the only user
is the host VGA device poking at RAM over PCIe. That is, nothing from
the ARM touches it.
It is worth fixing as developers copy existing device trees when
building their machines, and the XDMA driver does use the memory region
from the ARM side.
Fixes:
c4043ecac34a ("ARM: dts: aspeed: Add S2600WF BMC Machine")
Reported-by: John Wang <wangzhiqiang.bj@bytedance.com>
Link: https://lore.kernel.org/r/20200922064234.163799-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Billy Tsai [Mon, 12 Oct 2020 03:31:48 +0000 (11:31 +0800)]
ARM: dts: aspeed-g6: Fix the GPIO memory size
[ Upstream commit
886f82ce9f1f4559c139fdb2d79d158999ca38cd ]
The GPIO controller is a GPIO controller followed by some SGPIO
controllers, which are a different type of device with their own binding
and drivers.
Make the gpio node cover the only conventional GPIO controller.
Fixes:
8dbcb5b709b9 ("ARM: dts: aspeed-g6: Add gpio devices")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201012033150.21056-2-billy_tsai@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tianyue Ren [Fri, 9 Oct 2020 01:36:30 +0000 (09:36 +0800)]
selinux: fix error initialization in inode_doinit_with_dentry()
[ Upstream commit
83370b31a915493231e5b9addc72e4bef69f8d31 ]
Mark the inode security label as invalid if we cannot find
a dentry so that we will retry later rather than marking it
initialized with the unlabeled SID.
Fixes:
9287aed2ad1f ("selinux: Convert isec->lock into a spinlock")
Signed-off-by: Tianyue Ren <rentianyue@kylinos.cn>
[PM: minor comment tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Selvin Xavier [Tue, 13 Oct 2020 06:15:52 +0000 (23:15 -0700)]
RDMA/bnxt_re: Fix entry size during SRQ create
[ Upstream commit
b898d5c50cab1f985e77d053eb5c4d2c4a7694ae ]
Only static WQE is supported for SRQ. So always use the max supported SGEs
while calculating SRQ entry size.
Fixes:
2bb3c32c5c5f ("RDMA/bnxt_re: Change wr posting logic to accommodate variable wqes")
Link: https://lore.kernel.org/r/1602569752-12745-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-rpi.git / log