Thomas Richter [Fri, 13 Jan 2023 11:29:55 +0000 (12:29 +0100)]
s390/cpum_sf: diagnostic sampling buffer setup to handle virtual addresses
The CPU Measurement Sampling Facility (CPUM_SF) installs large buffers
to save samples collected by hardware. These buffers are organized
as Sample Data Buffer Tables (SDBT) and Sample Data Buffers (SDB).
SDBs contain the samples which are extracted and saved in the perf
ring buffer.
The SDBTs are chained using real addresses and refer to SDBs using
real addresses.
The diagnostic sampling setup uses buffers provided by the process
which invokes perf_event_open system call. The buffers are memory
mapped. The buffers have been allocated by the kernel event
subsystem.
Add proper virtual to phyiscal address translation to the buffer
chaining. The current constraint which requires virtual equals
real address layout is removed.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Thomas Richter [Fri, 13 Jan 2023 11:12:07 +0000 (12:12 +0100)]
s390/cpum_sf: rework macro AUX_SDB_NUM_xxx
Macro AUX_SDB_NUM() has three parameters. The first one is not used.
Remove the first parameter. Also convert the macros to inline functions.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Thomas Richter [Mon, 16 Jan 2023 13:58:22 +0000 (14:58 +0100)]
s390/cpum_sf: sampling buffer setup to handle virtual addresses
The CPU Measurement Sampling Facility (CPUM_SF) installs large buffers
to save samples collected by hardware. These buffers are organized
as Sample Data Buffer Tables (SDBT) and Sample Data Buffers (SDB).
SDBs contain the samples which are extracted and saved in the perf
ring buffer.
The SDBTs are chained using real addresses and refer to SDBs using
real addresses.
Adds proper virtual to phyiscal address translation to the buffer
chaining. The current constraint which requires virtual equals real
address layout is removed.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Thomas Richter [Thu, 5 Jan 2023 13:11:33 +0000 (14:11 +0100)]
s390/cpum_sf: remove debug statements from function setup_pmc_cpu
Remove debug statements from function setup_pmc_cpu().
The debug statement displays a pointer value to a per cpu variable.
This pointer value is printed nowhere else, so it has no use for
cross reference.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Thomas Richter [Thu, 12 Jan 2023 14:09:21 +0000 (15:09 +0100)]
s390/cpum_sf: move functions from header file to source file
Some inline helper functions are defined in a header file but used
in only one source file. Move these functions to the source file.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Jiapeng Chong [Tue, 17 Jan 2023 06:02:23 +0000 (14:02 +0800)]
s390/vmem: use swap() instead of open coding it
Swap is a function interface that provides exchange function. To avoid
code duplication, we can use swap function.
./arch/s390/mm/vmem.c:680:10-11: WARNING opportunity for swap().
[hca@linux.ibm.com: get rid of all temp variables]
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3786
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230117060223.58583-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Vineeth Vijayan [Thu, 17 Nov 2022 06:31:50 +0000 (07:31 +0100)]
s390/cio: evaluate devices with non-operational paths
css_schedule_reprobe() function calls the evaluation for CSS_EVAL_UNREG
which is specific to the idset of unregistered subchannels. This
evaluation was introduced because, previously, if the underlying device
become not-accessible, the subchannel was unregistered. But, in the recent
changes in cio,with the commit '
2297791c92d0 s390/cio: dont unregister
subchannel from child-drivers', we no longer unregister the subchannels
just because of a non-operational device. This allows to have subchannels
without any operational device connected on it. So, a css_schedule_reprobe
function on unregistered subchannel does not have any effect.
Change this functionality to evaluate the subchannels which does not
have a working path to the device. This could be due the erroneous
device or due to the erraneous path. Evaluate based on the values of OPM
and PAM&POM.
Here we introduced a new idset function,to keep I/O subchannels in the
idset when the last seen status indicates that the device has no working
path. A device has no working path if all available paths have been tried
without success.A failed I/O attempt on a path is indicated as a 0 bit
value in the POM mask. By looking at the POM mask bit values of available
paths (1 in PAM) that Linux is supposed to use (1 in vary mask OPM), we
can identify a non-working device as a device where the bit-wise and of
the PAM, POM and OPM mask return 0.
css_schedule_reprobe() is being used by dasd-driver and chsc-cio
component. dasd driver, when it detects a change in the pathgroup, invokes
the re-evaluation of the subchannel. And chsc-cio component upon a CRW
event, (resource accessibility event). In both the cases, it makes much
better sense to re-evalute the subchannel with no-valid path.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reported-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Christophe JAILLET [Sat, 14 Jan 2023 15:08:22 +0000 (16:08 +0100)]
s390/ipl: use kstrtobool() instead of strtobool()
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/58a3ed2e21903a93dfd742943b1e6936863ca037.1673708887.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Heiko Carstens [Tue, 17 Jan 2023 18:12:39 +0000 (19:12 +0100)]
Merge branch 'fixes' into features
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Heiko Carstens [Tue, 17 Jan 2023 18:00:59 +0000 (19:00 +0100)]
s390: workaround invalid gcc-11 out of bounds read warning
GCC 11.1.0 and 11.2.0 generate a wrong warning when compiling the
kernel e.g. with allmodconfig:
arch/s390/kernel/setup.c: In function ‘setup_lowcore_dat_on’:
./include/linux/fortify-string.h:57:33: error: ‘__builtin_memcpy’ reading 128 bytes from a region of size 0 [-Werror=stringop-overread]
...
arch/s390/kernel/setup.c:526:9: note: in expansion of macro ‘memcpy’
526 | memcpy(abs_lc->cregs_save_area, S390_lowcore.cregs_save_area,
| ^~~~~~
This could be addressed by using absolute_pointer() with the
S390_lowcore macro, but this is not a good idea since this generates
worse code for performance critical paths.
Therefore simply use a for loop to copy the array in question and get
rid of the warning.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Vineeth Vijayan [Mon, 2 Jan 2023 19:02:53 +0000 (20:02 +0100)]
docs/ABI: use linux-s390 list as the main contact
Remove Cornelia's email address from the file as suggested by her. List
linux-s390 mailing-list address as the primary contact instead.
Link: https://lore.kernel.org/linux-s390/8735d0oiq6.fsf@redhat.com/
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Christophe JAILLET [Sun, 31 Jul 2022 16:09:14 +0000 (18:09 +0200)]
s390/vfio-ap: fix an error handling path in vfio_ap_mdev_probe_queue()
The commit in Fixes: has switch the order of a sysfs_create_group() and a
kzalloc().
It correctly removed the now useless kfree() but forgot to add a
sysfs_remove_group() in case of (unlikely) memory allocation failure.
Add it now.
Fixes:
260f3ea14138 ("s390/vfio-ap: move probe and remove callbacks to vfio_ap_ops.c")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/d0c0a35eec4fa87cb7f3910d8ac4dc0f7dc9008a.1659283738.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Heiko Carstens [Sun, 8 Jan 2023 18:08:55 +0000 (19:08 +0100)]
s390: move __amode31_base declaration to proper header file
Move __amode31_base declaration to proper header file to get rid of
arch/s390/boot/startup.c:24:15:
warning: symbol '__amode31_base' was not declared. Should it be static?
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Alexander Gordeev [Mon, 19 Dec 2022 20:08:27 +0000 (21:08 +0100)]
s390/mm: allocate Absolute Lowcore Area in decompressor
Move Absolute Lowcore Area allocation to the decompressor.
As result, get_abs_lowcore() and put_abs_lowcore() access
brackets become really straight and do not require complex
execution context analysis and LAP and interrupts tackling.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Alexander Gordeev [Sun, 11 Dec 2022 07:18:57 +0000 (08:18 +0100)]
s390/mm: allocate Real Memory Copy Area in decompressor
Move Real Memory Copy Area allocation to the decompressor.
As result, memcpy_real() and memcpy_real_iter() movers
become usable since the very moment the kernel starts.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Alexander Gordeev [Thu, 15 Dec 2022 09:33:52 +0000 (10:33 +0100)]
s390/boot: allow setup of different virtual address types
Currently the decompressor sets up only identity mapping.
Allow adding more address range types as a prerequisite
for allocation of kernel fixed mappings.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Alexander Gordeev [Fri, 16 Dec 2022 18:49:23 +0000 (19:49 +0100)]
s390/kasan: remove identity mapping support
The identity mapping is created in the decompressor,
there is no need to have the same functionality in
the kasan setup code. Thus, remove it.
Remove the 4KB pages check for first 1MB since there
is no need to take care of the lowcore pages.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Alexander Gordeev [Fri, 2 Dec 2022 18:23:11 +0000 (19:23 +0100)]
s390/maccess: remove dead DAT-off code
As the kernel is executed in DAT-on mode only, remove
unnecessary DAT bit check together with the dead code.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Alexander Gordeev [Tue, 13 Dec 2022 10:35:11 +0000 (11:35 +0100)]
s390/mm: start kernel with DAT enabled
The setup of the kernel virtual address space is spread
throughout the sources, boot stages and config options
like this:
1. The available physical memory regions are queried
and stored as mem_detect information for later use
in the decompressor.
2. Based on the physical memory availability the virtual
memory layout is established in the decompressor;
3. If CONFIG_KASAN is disabled the kernel paging setup
code populates kernel pgtables and turns DAT mode on.
It uses the information stored at step [1].
4. If CONFIG_KASAN is enabled the kernel early boot
kasan setup populates kernel pgtables and turns DAT
mode on. It uses the information stored at step [1].
The kasan setup creates early_pg_dir directory and
directly overwrites swapper_pg_dir entries to make
shadow memory pages available.
Move the kernel virtual memory setup to the decompressor
and start the kernel with DAT turned on right from the
very first istruction. That completely eliminates the
boot phase when the kernel runs in DAT-off mode, simplies
the overall design and consolidates pgtables setup.
The identity mapping is created in the decompressor, while
kasan shadow mappings are still created by the early boot
kernel code.
Share with decompressor the existing kasan memory allocator.
It decreases the size of a newly requested memory block from
pgalloc_pos and ensures that kernel image is not overwritten.
pgalloc_low and pgalloc_pos pointers are made preserved boot
variables for that.
Use the bootdata infrastructure to setup swapper_pg_dir
and invalid_pg_dir directories used by the kernel later.
The interim early_pg_dir directory established by the
kasan initialization code gets eliminated as result.
As the kernel runs in DAT-on mode only the PSW_KERNEL_BITS
define gets PSW_MASK_DAT bit by default. Additionally, the
setup_lowcore_dat_off() and setup_lowcore_dat_on() routines
get merged, since there is no DAT-off mode stage anymore.
The memory mappings are created with RW+X protection that
allows the early boot code setting up all necessary data
and services for the kernel being booted. Just before the
paging is enabled the memory protection is changed to
RO+X for text, RO+NX for read-only data and RW+NX for
kernel data and the identity mapping.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Alexander Gordeev [Sun, 4 Dec 2022 20:15:41 +0000 (21:15 +0100)]
s390/boot: detect and enable memory facilities
Detect and enable memory facilities which is a
prerequisite for pgtables setup in the decompressor.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Alexander Gordeev [Fri, 2 Dec 2022 18:07:07 +0000 (19:07 +0100)]
s390/pgtable: add REGION3_KERNEL_EXEC protection
Similar to existing PAGE_KERNEL_EXEC and SEGMENT_KERNEL_EXEC
memory protection add REGION3_KERNEL_EXEC attribute that
could be set on PUD pgtable entries.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Alexander Gordeev [Fri, 16 Dec 2022 18:07:38 +0000 (19:07 +0100)]
s390/kasan: use set_pXe_bit() for pgtable entries setup
Convert setup of pgtable entries to use set_pXe_bit()
helpers as the preferred way in MM code.
Locally introduce pgprot_clear_bit() helper, which is
strictly speaking a generic function. However, it is
only x86 pgprot_clear_protnone_bits() helper, which
does a similar thing, so do not make it public.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Alexander Gordeev [Sat, 10 Dec 2022 08:49:04 +0000 (09:49 +0100)]
s390/kasan: cleanup setup of untracked memory pgtables
Avoid duplicate IS_ENABLED(CONFIG_KASAN_VMALLOC) condition check.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Alexander Gordeev [Fri, 9 Dec 2022 21:09:44 +0000 (22:09 +0100)]
s390/kasan: cleanup setup of zero pgtable
Fix variables initialization coding style and setup zero
pgtable same way region and segment pgtables are set up.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Alexander Gordeev [Tue, 13 Dec 2022 10:31:39 +0000 (11:31 +0100)]
s390/kasan: sort out physical vs virtual memory confusion
The kasan early boot memory allocators operate on pgalloc_pos
and segment_pos physical address pointers, but fail to convert
it to the corresponding virtual pointers.
Currently it is not a problem, since virtual and physical
addresses on s390 are the same. Nevertheless, should they
ever differ, this would cause an invalid pointer access.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Alexander Gordeev [Thu, 15 Dec 2022 07:00:34 +0000 (08:00 +0100)]
s390/early: fix sclp_early_sccb variable lifetime
Commit
ada1da31ce34 ("s390/sclp: sort out physical vs
virtual pointers usage") fixed the notion of virtual
address for sclp_early_sccb pointer. However, it did
not take into account that kasan_early_init() can also
output messages and sclp_early_sccb should be adjusted
by the time kasan_early_init() is called.
Currently it is not a problem, since virtual and physical
addresses on s390 are the same. Nevertheless, should they
ever differ, this would cause an invalid pointer access.
Fixes:
ada1da31ce34 ("s390/sclp: sort out physical vs virtual pointers usage")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Alexander Gordeev [Thu, 5 May 2022 14:54:54 +0000 (16:54 +0200)]
s390/boot: cleanup decompressor header files
Move declarations to appropriate header files. Instead of cryptic
casting directly assign struct vmlinux_info type to _vmlinux_info
linker script variable - wich it actually is.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Heiko Carstens [Wed, 11 Jan 2023 14:04:47 +0000 (15:04 +0100)]
s390: update defconfigs
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Heiko Carstens [Mon, 9 Jan 2023 14:54:56 +0000 (15:54 +0100)]
KVM: s390: interrupt: use READ_ONCE() before cmpxchg()
Use READ_ONCE() before cmpxchg() to prevent that the compiler generates
code that fetches the to be compared old value several times from memory.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20230109145456.2895385-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Heiko Carstens [Mon, 9 Jan 2023 10:51:20 +0000 (11:51 +0100)]
s390/percpu: add READ_ONCE() to arch_this_cpu_to_op_simple()
Make sure that *ptr__ within arch_this_cpu_to_op_simple() is only
dereferenced once by using READ_ONCE(). Otherwise the compiler could
generate incorrect code.
Cc: <stable@vger.kernel.org>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Heiko Carstens [Thu, 5 Jan 2023 14:44:20 +0000 (15:44 +0100)]
s390/cpum_sf: add READ_ONCE() semantics to compare and swap loops
The current cmpxchg_double() loops within the perf hw sampling code do not
have READ_ONCE() semantics to read the old value from memory. This allows
the compiler to generate code which reads the "old" value several times
from memory, which again allows for inconsistencies.
For example:
/* Reset trailer (using compare-double-and-swap) */
do {
te_flags = te->flags & ~SDB_TE_BUFFER_FULL_MASK;
te_flags |= SDB_TE_ALERT_REQ_MASK;
} while (!cmpxchg_double(&te->flags, &te->overflow,
te->flags, te->overflow,
te_flags, 0ULL));
The compiler could generate code where te->flags used within the
cmpxchg_double() call may be refetched from memory and which is not
necessarily identical to the previous read version which was used to
generate te_flags. Which in turn means that an incorrect update could
happen.
Fix this by adding READ_ONCE() semantics to all cmpxchg_double()
loops. Given that READ_ONCE() cannot generate code on s390 which atomically
reads 16 bytes, use a private compare-and-swap-double implementation to
achieve that.
Also replace cmpxchg_double() with the private implementation to be able to
re-use the old value within the loops.
As a side effect this converts the whole code to only use bit fields
to read and modify bits within the hws trailer header.
Reported-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/linux-s390/Y71QJBhNTIatvxUT@osiris/T/#ma14e2a5f7aa8ed4b94b6f9576799b3ad9c60f333
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Heiko Carstens [Sun, 8 Jan 2023 18:13:49 +0000 (19:13 +0100)]
s390/archrandom: add missing header include
Add missing header include to get rid of
arch/s390/crypto/arch_random.c:15:1:
warning: symbol 's390_arch_random_available' was not declared. Should it be static?
arch/s390/crypto/arch_random.c:17:12:
warning: symbol 's390_arch_random_counter' was not declared. Should it be static?
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Heiko Carstens [Tue, 10 Jan 2023 12:49:23 +0000 (13:49 +0100)]
s390/con3270: move condev definition
Fix this for allmodconfig:
drivers/s390/char/con3270.c:43:24: error: 'condev' defined but not used [-Werror=unused-variable]
static struct tty3270 *condev;
^~~~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes:
c17fe081ac1f ("s390/3270: unify con3270 + tty3270")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Alexander Egorenkov [Mon, 14 Nov 2022 10:40:08 +0000 (11:40 +0100)]
s390/kexec: fix ipl report address for kdump
This commit addresses the following erroneous situation with file-based
kdump executed on a system with a valid IPL report.
On s390, a kdump kernel, its initrd and IPL report if present are loaded
into a special and reserved on boot memory region - crashkernel. When
a system crashes and kdump was activated before, the purgatory code
is entered first which swaps the crashkernel and [0 - crashkernel size]
memory regions. Only after that the kdump kernel is entered. For this
reason, the pointer to an IPL report in lowcore must point to the IPL report
after the swap and not to the address of the IPL report that was located in
crashkernel memory region before the swap. Failing to do so, makes the
kdump's decompressor try to read memory from the crashkernel memory region
which already contains the production's kernel memory.
The situation described above caused spontaneous kdump failures/hangs
on systems where the Secure IPL is activated because on such systems
an IPL report is always present. In that case kdump's decompressor tried
to parse an IPL report which frequently lead to illegal memory accesses
because an IPL report contains addresses to various data.
Cc: <stable@vger.kernel.org>
Fixes:
99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel")
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Xu Panda [Thu, 5 Jan 2023 12:24:34 +0000 (20:24 +0800)]
s390/zcrypt: use strscpy() to instead of strncpy()
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL-terminated strings.
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Link: https://lore.kernel.org/r/202301052024349365834@zte.com.cn
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Eric Farman [Fri, 19 Feb 2021 19:41:49 +0000 (20:41 +0100)]
vfio/ccw: remove old IDA format restrictions
By this point, all the pieces are in place to properly support
a 2K Format-2 IDAL, and to convert a guest Format-1 IDAL to
the 2K Format-2 variety. Let's remove the fence that prohibits
them, and allow a guest to submit them if desired.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Eric Farman [Thu, 11 Aug 2022 17:20:54 +0000 (19:20 +0200)]
vfio/ccw: don't group contiguous pages on 2K IDAWs
The vfio_pin_pages() interface allows contiguous pages to be
pinned as a single request, which is great for the 4K pages
that are normally processed. Old IDA formats operate on 2K
chunks, which makes this logic more difficult.
Since these formats are rare, let's just invoke the page
pinning one-at-a-time, instead of trying to group them.
We can rework this code at a later date if needed.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Eric Farman [Mon, 31 Oct 2022 18:48:29 +0000 (19:48 +0100)]
vfio/ccw: handle a guest Format-1 IDAL
There are two scenarios that need to be addressed here.
First, an ORB that does NOT have the Format-2 IDAL bit set could
have both a direct-addressed CCW and an indirect-data-address CCW
chained together. This means that the IDA CCW will contain a
Format-1 IDAL, and can be easily converted to a 2K Format-2 IDAL.
But it also means that the direct-addressed CCW needs to be
converted to the same 2K Format-2 IDAL for consistency with the
ORB settings.
Secondly, a Format-1 IDAL is comprised of 31-bit addresses.
Thus, we need to cast this IDAL to a pointer of ints while
populating the list of addresses that are sent to vfio.
Since the result of both of these is the use of the 2K IDAL
variants, and the output of vfio-ccw is always a Format-2 IDAL
(in order to use 64-bit addresses), make sure that the correct
control bit gets set in the ORB when these scenarios occur.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Eric Farman [Fri, 21 Oct 2022 18:53:51 +0000 (20:53 +0200)]
vfio/ccw: allocate/populate the guest idal
Today, we allocate memory for a list of IDAWs, and if the CCW
being processed contains an IDAL we read that data from the guest
into that space. We then copy each IDAW into the pa_iova array,
or fabricate that pa_iova array with a list of addresses based
on a direct-addressed CCW.
Combine the reading of the guest IDAL with the creation of a
pseudo-IDAL for direct-addressed CCWs, so that both CCW types
have a "guest" IDAL that can be populated straight into the
pa_iova array.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Eric Farman [Wed, 2 Dec 2020 18:37:24 +0000 (19:37 +0100)]
vfio/ccw: calculate number of IDAWs regardless of format
The idal_nr_words() routine works well for 4K IDAWs, but lost its
ability to handle the old 2K formats with the removal of 31-bit
builds in commit
5a79859ae0f3 ("s390: remove 31 bit support").
Since there's nothing preventing a guest from generating this IDAW
format, let's re-introduce the math for them and use both when
calculating the number of IDAWs based on the bits specified in
the ORB.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Eric Farman [Thu, 20 Oct 2022 17:00:14 +0000 (19:00 +0200)]
vfio/ccw: read only one Format-1 IDAW
The intention is to read the first IDAW to determine the starting
location of an I/O operation, knowing that the second and any/all
subsequent IDAWs will be aligned per architecture. But, this read
receives 64-bits of data, which is the size of a Format-2 IDAW.
In the event that Format-1 IDAWs are presented, adjust the size
of the read to 32-bits. The data will end up occupying the upper
word of the target iova variable, so shift it down to the lower
word for use as an address. (By definition, this IDAW format
uses a 31-bit address, so the "sign" bit will always be off and
there is no concern about sign extension.)
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Eric Farman [Mon, 31 Oct 2022 18:12:54 +0000 (19:12 +0100)]
vfio/ccw: refactor the idaw counter
The rules of an IDAW are fairly simple: Each one can move no
more than a defined amount of data, must not cross the
boundary defined by that length, and must be aligned to that
length as well. The first IDAW in a list is special, in that
it does not need to adhere to that alignment, but the other
rules still apply. Thus, by reading the first IDAW in a list,
the number of IDAWs that will comprise a data transfer of a
particular size can be calculated.
Let's factor out the reading of that first IDAW with the
logic that calculates the length of the list, to simplify
the rest of the routine that handles the individual IDAWs.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Eric Farman [Fri, 21 Oct 2022 15:02:48 +0000 (17:02 +0200)]
vfio/ccw: populate page_array struct inline
There are two possible ways the list of addresses that get passed
to vfio are calculated. One is from a guest IDAL, which would be
an array of (probably) non-contiguous addresses. The other is
built from contiguous pages that follow the starting address
provided by ccw->cda.
page_array_alloc() attempts to simplify things by pre-populating
this array from the starting address, but that's not needed for
a CCW with an IDAL anyway so doesn't need to be in the allocator.
Move it to the caller in the non-IDAL case, since it will be
overwritten when reading the guest IDAL.
Remove the initialization of the pa_page output pointers,
since it won't be explicitly needed for either case.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Eric Farman [Fri, 21 Oct 2022 14:59:13 +0000 (16:59 +0200)]
vfio/ccw: pass page count to page_array struct
The allocation of our page_array struct calculates the number
of 4K pages that would be needed to hold a certain number of
bytes. But, since the number of pages that will be pinned is
also calculated by the length of the IDAL, this logic is
unnecessary. Let's pass that information in directly, and
avoid the math within the allocator.
Also, let's make this two allocations instead of one,
to make it apparent what's happening within here.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Eric Farman [Thu, 22 Oct 2020 14:54:32 +0000 (16:54 +0200)]
vfio/ccw: remove unnecessary malloc alignment
Everything about this allocation is harder than necessary,
since the memory allocation is already aligned to our needs.
Break them apart for readability, instead of doing the
funky arithmetic.
Of the structures that are involved, only ch_ccw needs the
GFP_DMA flag, so the others can be allocated without it.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Eric Farman [Fri, 21 Oct 2022 13:32:30 +0000 (15:32 +0200)]
vfio/ccw: simplify CCW chain fetch routines
The act of processing a fetched CCW has two components:
1) Process a Transfer-in-channel (TIC) CCW
2) Process any other CCW
The former needs to look at whether the TIC jumps backwards into
the current channel program or forwards into a new segment,
while the latter just processes the CCW data address itself.
Rather than passing the chain segment and index within it to the
handlers for the above, and requiring each to calculate the
elements it needs, simply pass the needed pointers directly.
For the TIC, that means the CCW being processed and the location
of the entire channel program which holds all segments. For the
other CCWs, the page_array pointer is also needed to perform the
page pinning, etc.
While at it, rename ccwchain_fetch_direct to _ccw, to indicate
what it is. The name "_direct" is historical, when it used to
process a direct-addressed CCW, but IDAs are processed here too.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Eric Farman [Thu, 7 Jul 2022 15:30:26 +0000 (17:30 +0200)]
vfio/ccw: replace copy_from_iova with vfio_dma_rw
It was suggested [1] that we replace the old copy_from_iova() routine
(which pins a page, does a memcpy, and unpins the page) with the
newer vfio_dma_rw() interface.
This has a modest improvement in the overall time spent through the
fsm_io_request() path, and simplifies some of the code to boot.
[1] https://lore.kernel.org/r/
20220706170553.GK693670@nvidia.com/
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Eric Farman [Wed, 2 Dec 2020 18:19:30 +0000 (19:19 +0100)]
vfio/ccw: move where IDA flag is set in ORB
The output of vfio_ccw is always a Format-2 IDAL, but the code that
explicitly sets this is buried in cp_init().
In fact the input is often already a Format-2 IDAL, and would be
rejected (via the check in ccwchain_calc_length()) if it weren't,
so explicitly setting it doesn't do much. Setting it way down here
only makes it impossible to make decisions in support of other
IDAL formats.
Let's move that to where the rest of the ORB is set up, so that the
CCW processing in cp_prefetch() is performed according to the
contents of the unmodified guest ORB.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Eric Farman [Thu, 18 Apr 2019 18:26:15 +0000 (20:26 +0200)]
vfio/ccw: allow non-zero storage keys
Currently, vfio-ccw copies the ORB from the io_region to the
channel_program struct being built. It then adjusts various
pieces of that ORB to the values needed to be used by the
SSCH issued by vfio-ccw in the host.
This includes setting the subchannel key to the default,
presumably because Linux doesn't do anything with non-zero
storage keys itself. But it seems wrong to convert every I/O
to the default key if the guest itself requested a non-zero
subchannel (access) key.
Any channel program that sets a non-zero key would expect the
same key returned in the SCSW of the IRB, not zero, so best to
allow that to occur unimpeded.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Eric Farman [Thu, 10 Nov 2022 02:30:23 +0000 (03:30 +0100)]
vfio/ccw: simplify the cp_get_orb interface
There's no need to send in both the address of the subchannel
struct, and an element within it, to populate the ORB.
Pass the whole pointer and let cp_get_orb() take the pieces
that are needed.
Suggested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Eric Farman [Mon, 25 Jul 2022 20:21:14 +0000 (22:21 +0200)]
vfio/ccw: cleanup some of the mdev commentary
There is no longer an mdev struct accessible via a channel
program struct, but there are some artifacts remaining that
mention it. Clean them up.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Thu, 8 Dec 2022 19:58:26 +0000 (20:58 +0100)]
s390/con3270: add special output handling when oops_in_progress is set
Normally a user can scroll back with PF7/PF8 if printed messages are
outside of the visible screen area. This doesn't work when the kernel
crashes, because the scrollback handling is done by the kernel, which
is no longer alive after the kernel crash. Add code to always print
all dirty lines in the screen buffer, so the user can scroll back with
the terminal scrollback keys (Page Up/Down).
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Thu, 8 Dec 2022 08:24:06 +0000 (09:24 +0100)]
s390/con3270: set SBA and RA addresses when converting lines
Now that lines are converted during output, the RA and SBA no longer
need to get updated as an additional step. Instead set them when
converting the line.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Thu, 8 Dec 2022 07:41:17 +0000 (08:41 +0100)]
s390/con3270: simplify update flags
Make TTY3270_UPDATE_ALL the sum of all TTY3270_* flags, so we
don't need any special handling for it.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Wed, 7 Dec 2022 21:18:38 +0000 (22:18 +0100)]
s390/con3270: return from notifier when activate view fails
When activating the view fails (in this case because the 3270
is disconnected) return from the notifer callback. Otherwise
the system will deadlock.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 5 Dec 2022 14:20:46 +0000 (15:20 +0100)]
s390/diag: use __packed __aligned
Use __packed __aligned instead of __attribute__((packed, aligned(X)));
to match the rest of the file.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 5 Dec 2022 12:20:46 +0000 (13:20 +0100)]
s390/fs3270: split header files
In order to use the fs3270 one would need at least the ioctl definitions
in uapi. Add two new include files in uapi, which contain:
fs3270: ioctl number declarations + returned struct for TUBGETMOD.
raw3270: all the orders, attributes and similar stuff used with 3270
terminals.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 5 Dec 2022 11:32:02 +0000 (12:32 +0100)]
s390/fs3270: fix screen reset on activate
fs3270 uses EWRITEA to clear the screen when a user opens /dev/3270/tub.
However it misses the attribute byte after the EWRITEA, so (at least)
x3270 complains about 'Record too short, missing write flags'.
Add the missing flag byte to fix this.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 5 Dec 2022 09:38:39 +0000 (10:38 +0100)]
s390/fs3270: fix function prototypes
fix function prototypes split over two lines like:
static void
foobar(void)
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 5 Dec 2022 09:31:56 +0000 (10:31 +0100)]
s390/fs3270: use *ptr instead of struct in kzalloc
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 5 Dec 2022 09:30:48 +0000 (10:30 +0100)]
s390/fs3270: remove duplicate assignment
remove a duplicate assignment reported by checkpatch.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 5 Dec 2022 09:29:05 +0000 (10:29 +0100)]
s390/fs3270: add missing braces to if/else
Fix a few missing braces and wrong placement of braces
reported by checkpatch.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 5 Dec 2022 09:27:20 +0000 (10:27 +0100)]
s390/fs3270: fix whitespace errors
Fix a few whitespace errors reported by checkpatch, namely
superfluous whitespace, missing spaces and empty lines.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 5 Dec 2022 09:01:38 +0000 (10:01 +0100)]
s390/raw3270: fix nullpointer check
Fix the following checkpatch warning:
CHECK: Comparison to NULL could be written "!rp"
+ if (rp == NULL)
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 5 Dec 2022 08:46:24 +0000 (09:46 +0100)]
s390/raw3270: split up raw3270_activate_view()
move the core processing to __raw3270_activate_view() to
reduce the required if/else blocks and indentiion levels.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 5 Dec 2022 08:09:33 +0000 (09:09 +0100)]
s390/raw3270: remove BUG_ON in raw3270_request_reset()
WARN_ON_ONCE if list is not empty, and return an error code
instead.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 5 Dec 2022 08:02:16 +0000 (09:02 +0100)]
s390/raw3270: use DEVICE_ATTR_RO() for sysfs attributes
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 5 Dec 2022 07:57:01 +0000 (08:57 +0100)]
s390/raw3270: add comment to spinlock member
Add a small comment to the lock member of struct raw3270_view
to make checkpatch happy.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 5 Dec 2022 07:52:29 +0000 (08:52 +0100)]
s390/raw3270: fix raw3270 declarations
checkpatch complains about missing argument names in function
declarations. Fix it.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 5 Dec 2022 07:40:00 +0000 (08:40 +0100)]
s390/raw3270: fix indentation/whitespace errors
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 5 Dec 2022 06:56:16 +0000 (07:56 +0100)]
s390/raw3270: move EXPORT_SYMBOL() next to functions
Fixes a few checkpatch warning about EXPORT_SYMBOL being
at the end of the file instead of being next to the
functions.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Sun, 4 Dec 2022 20:05:37 +0000 (21:05 +0100)]
s390/con3270: fix minor checkpatch issues
Fix remaining checkpatch issues, like misplaced brackets,
whitespace and similar things. No functional change.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Sun, 4 Dec 2022 19:58:45 +0000 (20:58 +0100)]
s390/con3270: use msecs_to_jiffies()
Use msecs_to_jiffies() instead of HZ/10.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Sun, 4 Dec 2022 19:55:27 +0000 (20:55 +0100)]
s390/con3270: fix multiple assignments in one line
fix the following and similar checkpatch warnings:
CHECK: multiple assignments should be avoided
+ tp->cx = tp->saved_cx = 0;
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Sun, 4 Dec 2022 19:52:11 +0000 (20:52 +0100)]
s390/con3270: fix camelcase in enum members
fix the following and similar checkpatch warnings:
CHECK: Avoid CamelCase: <ESnormal>
+ enum { ESnormal, ESesc, ESsquare, ESparen, ESgetpars };
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Tue, 29 Nov 2022 11:28:36 +0000 (12:28 +0100)]
s390/con3270: add key help to status area
To let the user know about function key bindings, print
them next to the Running/History field at the lower right
of the screen. Also print the scrollback position.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Tue, 29 Nov 2022 10:19:09 +0000 (11:19 +0100)]
s390/con3270: reduce highlight width to 3 bits
With the previous change this reduces the size of struct tty3270_attribute
from four to two bytes. As we have this struct allocated for each character
cell, this saves quite some memory.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Tue, 29 Nov 2022 09:31:19 +0000 (10:31 +0100)]
s390/con3270: reduce f_color and b_color attribute size to 4 bit
As we're only supportign 8 colors, we don't need 8 bits. Reduce the
size to 4 bits to save memory.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 28 Nov 2022 10:34:52 +0000 (11:34 +0100)]
s390/con3270: rewrite command line recalling
Command line recalling is the last user of the 3270 custom malloc()
like allocator. Remove this dependency by using a statically allocated
buffer for the saved command lines, and also remove the allocator.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 28 Nov 2022 06:31:49 +0000 (07:31 +0100)]
s390/tty3270: use normal char buffer for prompt/input
Preparation patch to allow removing the custom 3270 memory allocator.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Thu, 24 Nov 2022 21:53:44 +0000 (22:53 +0100)]
s390/tty3270: convert lines during output
The length of the screen line is variable with the 3270 protocol.
For each attribute (foreground, background color, highlighting etc)
we need 3 bytes: the set attribute order, the attribute number, and
the value of the attribute. This means that depending on screen content,
we might end up 3*3 bytes addtional data for a single character.
Allocating the maximum possible amount of memory is quite a lot, and
we cannot easily extend the lines by allocating memory because we
might get called from atomic context. Failing to extend the memory
would also be bad as that would mean that we could miss kernel messages
in oom conditions. Therefore move the conversion to a 3270 datastream
to tty3270_update(), and use only single line buffer.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Sat, 26 Nov 2022 18:34:56 +0000 (19:34 +0100)]
s390/con3270: generate status line during output
Updating the status line is almost the same as generating
it when redrawing the screen. However, the code is much easier
to read when doing so.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Sun, 27 Nov 2022 19:43:53 +0000 (20:43 +0100)]
s390/tty3270: add 3270 datastream helpers
There are lots of places adding attributes or orders to the datastream.
Add a few helpers to make that code shorter and easier to read.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Sat, 26 Nov 2022 22:39:16 +0000 (23:39 +0100)]
s390/tty3270: move ASCII->EBCDIC conversion to convert_line()
Instead of always converting the character set, only convert them
when the line is really displayed.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Sat, 26 Nov 2022 22:24:43 +0000 (23:24 +0100)]
s390/con3270: move tty3270_convert_line()
To make the upcoming patches easier to read, move tty3270_convert_line()
before changing code. No functional change.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Sat, 26 Nov 2022 19:18:21 +0000 (20:18 +0100)]
s390/raw3270: make raw3270_buffer_address() accept x/y coordinates
All callers of raw3270_buffer_address() are calculating the offset
from some x/y coordinates. Move that calculation inside of the
function, so user can pass the x/y values directly. Note that
negative values are relative to the end-of-line or end-of-screen.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Thu, 24 Nov 2022 20:22:29 +0000 (21:22 +0100)]
s390/tty3270: allocate screen with scrollback
No functional change (except more memory consumption), in preparation
for the line buffer rework.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Thu, 24 Nov 2022 19:32:20 +0000 (20:32 +0100)]
s390/con3270: add helper to get number of tty rows
There a quite a few places using 'tp->view.rows - 2'.
Add a helper function for this. This will also be used
when a function key help line will be added.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 28 Nov 2022 18:55:57 +0000 (19:55 +0100)]
s390/tty3270: split up tty3270_convert_line()
To make the code easier to read, split up tty3270_convertline()
into several subfunctions:
- tty3270_resize_line() to realloc the line if it doesn't have enough
space left
- tty3270_required_length() to calculate how much space we need
- tty3270_add_attributes() to add the color and highlight attributes
- tty3270_add_reset_attributes() to reset the attributes at the end of
the line
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 28 Nov 2022 18:53:04 +0000 (19:53 +0100)]
s390/tty3270: resize terminal when the clear key is pressed
There's no easy way to figure out whether the user has re-connected
to the z/VM session. When the user re-connected with a different geometry
to z/VM, the screen layout is broken. Allow the user to force a resizing
by pressing the Clear Key.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 28 Nov 2022 18:50:10 +0000 (19:50 +0100)]
s390/tty3270: move resize work to raw3270
This change was initially made to reduce code duplication when the
con3270 and tty3270 shared the same resize code. It still makes sense
to move the resize workqueue to raw3270 in case we add some other view
later.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 28 Nov 2022 18:42:28 +0000 (19:42 +0100)]
s390/raw3270: add raw3270_start_request() helper
There are a few places (and there would be more with the following commits)
like this:
raw3270_request_reset(cp->kreset);
raw3270_request_set_cmd(cp->kreset, TC_WRITE);
raw3270_request_add_data(cp->kreset, &kreset_data, 1);
raw3270_start(&cp->view, cp->kreset);
i.e reset a request, setting the command, adding payload, and starting the
request. Add a helper raw3270_start_request() which takes a command and
the payload as argument and calls the approppriate functions.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 28 Nov 2022 18:40:44 +0000 (19:40 +0100)]
s390/tty3270: add AID defines
Use AID_* instead of hex numbers to make the code a bit
easier to read. also convert the if/else blocks to a
switch statement in tty3270_read_tasklet().
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Thu, 17 Nov 2022 16:52:40 +0000 (17:52 +0100)]
s390/tty3270: ignore NUL characters
With 'TERM=vt220' zsh is sending several NUL characters with
the prompt to the tty. Both xterm and the linux drm console
seem to ignore them. Ignore them in tty3270 as well.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Thu, 17 Nov 2022 16:30:40 +0000 (17:30 +0100)]
s390/tty3270: add support for VT100 graphics escape
Add support for ESC(B and ESC(0 to switch between character charset
and graphics charset. Used in vt100 and later terminal generations.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Mon, 28 Nov 2022 21:22:01 +0000 (22:22 +0100)]
s390/tty3270: add support for graphic escape
Add support for ASCII S0/S1 to switch between character
charset and graphic charset.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Thu, 17 Nov 2022 21:22:15 +0000 (22:22 +0100)]
s390/tty3270: add support for background color
3270 terminals support 8 background colors. Add the code to utilize
them. Unfortunately the line erase code need to be adjusted: Without
background colors, it was sufficient to just set the line length to
zero. With background colors, we need to put spaces with the correct
background color.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Tue, 29 Nov 2022 07:02:01 +0000 (08:02 +0100)]
s390/tty3270: add struct tty3270_attribute
In preparation of background color and graphic escape support add
a structure for attributes can be copied at once.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Tue, 29 Nov 2022 10:49:23 +0000 (11:49 +0100)]
s390/raw3270: use __packed instead of __attribute__((packed))
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Sun, 27 Nov 2022 08:26:24 +0000 (09:26 +0100)]
s390/tty3270: use switch/case in tty3270_erase_display()
This makes the code easier to read.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>