Adam Thomas [Sat, 2 Feb 2013 22:35:08 +0000 (22:35 +0000)]
UBIFS: fix double free of ubifs_orphan objects
commit
8afd500cb52a5d00bab4525dd5a560d199f979b9 upstream.
The last orphan in the dnext list has its dnext set to NULL. Because
of that, ubifs_delete_orphan assumes that it is not on the dnext list
and frees it immediately instead ignoring it as a second delete. The
orphan is later freed again by erase_deleted.
This change adds an explicit flag to ubifs_orphan indicating whether
it is pending delete.
Signed-off-by: Adam Thomas <adamthomas1111@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adam Thomas [Sat, 2 Feb 2013 22:32:31 +0000 (22:32 +0000)]
UBIFS: fix use of freed ubifs_orphan objects
commit
2928f0d0c5ebd6c9605c0d98207a44376387c298 upstream.
The last orphan in the cnext list has its cnext set to NULL. Because
of that, ubifs_delete_orphan assumes that it is not on the cnext list
and frees it immediately instead of adding it to the dnext list. The
freed orphan is later modified by write_orph_node.
This can cause various inconsistencies including directory entries
that cannot be removed and this error:
UBIFS error (pid 20685): layout_cnodes: LPT out of space at LEB 14:129009 needing 17, done_ltab 1, done_lsave 1
This is a regression introduced by
"
7074e5eb UBIFS: remove invalid reference to list iterator variable".
This change adds an explicit flag to ubifs_orphan indicating whether
it is pending commit.
Signed-off-by: Adam Thomas <adamthomas1111@gmail.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Mon, 25 Feb 2013 06:09:24 +0000 (06:09 +0000)]
b43: Fix lockdep splat on module unload
commit
63a02ce1c5c59baa40b99756492e3ec8d6b51483 upstream.
On unload, b43 produces a lockdep warning that can be summarized in the
following way:
======================================================
[ INFO: possible circular locking dependency detected ]
3.8.0-wl+ #117 Not tainted
-------------------------------------------------------
modprobe/5557 is trying to acquire lock:
((&wl->firmware_load)){+.+.+.}, at: [<
ffffffff81062160>] flush_work+0x0/0x2a0
but task is already holding lock:
(rtnl_mutex){+.+.+.}, at: [<
ffffffff813bd7d2>] rtnl_lock+0x12/0x20
which lock already depends on the new lock.
[ INFO: possible circular locking dependency detected ]
======================================================
The full output is available at http://lkml.indiana.edu/hypermail/linux/kernel/1302.3/00060.html.
To summarize, commit 6b6fa58 added a 'cancel_work_sync(&wl->firmware_load)'
call in the wrong place.
The fix is to move the cancel_work_sync() call to b43_bcma_remove() and
b43_ssb_remove(). Thanks to Johannes Berg and Michael Buesch for help in
diagnosing the log output.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe Balbi [Thu, 24 Jan 2013 09:56:11 +0000 (11:56 +0200)]
usb: dwc3: gadget: change HIRD threshold to 12
commit
1a947746dbe1486d0e305ab512ddf085b7874cb3 upstream.
First of all, that 28 value makes no sense as
HIRD threshold is a 4-bit value, second of all
it's causing issues for OMAP5.
Using 12 because commit
cbc725b3 (usb: dwc3:
keep default hird threshold value as 4b1100)
had the intention of setting the maximum allowed
value of 0xc.
Also, original code has been wrong forever, so
this should be backported as far back as
possible.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pratyush Anand [Mon, 14 Jan 2013 10:29:35 +0000 (15:59 +0530)]
usb: dwc3: gadget: fix skip LINK_TRB on ISOC
commit
915e202aeeb59e272992a6364c910aaef3073544 upstream.
When we reach to link trb, we just need to increase free_slot and then
calculate TRB. Return is not correct, as it will cause wrong TRB DMA
address to fetch in case of update transfer.
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pratyush Anand [Mon, 14 Jan 2013 10:29:34 +0000 (15:59 +0530)]
usb: dwc3: gadget: fix isoc END TRANSFER Condition
commit
cdc359dd87ab6c39a67dab724fd0b61c16e6f08b upstream.
There were still some corner cases where isoc transfer was not able to
restart, specially when missed isoc does not happen , and in fact gadget does
not queue any new request during giveback.
Cleanup function calls giveback first, which provides a way to queue
another request to gadget. But gadget did not had any data. So , it did
not call ep_queue. To twist it further, gadget did not queue till
cleanup for last queued TRB is called. If we ever reach this scenario,
we must call END TRANSFER, so that we receive a new xfernotready with
information about current microframe number.
Also insure that there is no request submitted to core when issuing END
TRANSFER.
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pratyush Anand [Mon, 14 Jan 2013 10:29:32 +0000 (15:59 +0530)]
usb: dwc3: gadget: fix missed isoc
commit
7efea86c2868b8fd9df65e589e33aebe498ce21d upstream.
There are two reasons to generate missed isoc.
1. when the host does not poll for all the data.
2. because of application-side delays that prevent all the data from
being transferred in programmed microframe.
Current code was able to handle first case only. This patch handles
scenario 2 as well.Scenario 2 sometime may occur with complex gadget
application, however it can be easily reproduced for testing purpose as
follows:
a. use isoc binterval as 1 in f_sourcesink.
b. use pattern=0
c. introduce a delay of 150us deliberately in source_sink_complete, so
that after few frames it lands into scenario 2.
d. now run testusb 16 (isoc in test). You will notice that if this
patch is not applied then isoc transfer is not able to recover after
first missed.
Current patch's approach is as under:
If missed isoc occurs and there is no request queued then issue END
TRANSFER, so that core generates next xfernotready and we will issue a
fresh START TRANSFER.
If there are still queued request then wait, do not issue either END or
UPDATE TRANSFER, just attach next request in request_list during giveback.
If any future queued request is successfully transferred then we will issue
UPDATE TRANSFER for all request in the request_list.
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pratyush Anand [Mon, 14 Jan 2013 10:29:31 +0000 (15:59 +0530)]
usb: dwc3: Enable usb2 LPM only when connected as usb2.0
commit
2b758350af19db9a5c98241cf222c2e211d7a912 upstream.
Synopsys says:
The HIRD Threshold field must be set to ‘0’ when the device core is
operating in super speed mode.
This patch implements above statement.
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Fri, 25 Jan 2013 04:24:56 +0000 (23:24 -0500)]
quota: autoload the quota_v2 module for QFMT_VFS_V1 quota format
commit
c3ad83d9efdfe6a86efd44945a781f00c879b7b4 upstream.
Otherwise, ext4 file systems with the quota featured enable will get a
very confusing "No such process" error message if the quota code is
built as a module and the quota_v2 module has not been loaded.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Thu, 21 Feb 2013 17:20:00 +0000 (17:20 +0000)]
IB/srp: Fail I/O requests if the transport is offline
commit
2ce19e72f4d570c87e025ee6fca4eae699a8b712 upstream.
If an SRP target is no longer reachable and srp_reset_host() fails to
reconnect then ib_srp will invoke scsi_remove_host(). That function
will invoke __scsi_remove_device() for each LUN. And that last
function will change the device state from SDEV_TRANSPORT_OFFLINE into
SDEV_CANCEL. Certain user space software, e.g. older versions of
multipathd, continue queueing I/O to SCSI devices that are in the
SDEV_CANCEL state.
If these I/O requests are submitted as SG_IO that means that the
REQ_PREEMPT flag will be set and hence that these requests will be
passed to srp_queuecommand(). These requests will time out. If new
requests are queued fast enough from user space these active requests
will prevent __scsi_remove_device() to finish.
Avoid this by failing I/O requests in the SDEV_CANCEL state if the
transport is offline. Introduce a new variable to keep track of the
transport state instead of failing requests if (!target->connected ||
target->qp_in_error), so that the SCSI error handler has a chance to
retry commands after a transport layer failure occurred.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Thu, 21 Feb 2013 17:19:04 +0000 (17:19 +0000)]
IB/srp: Avoid endless SCSI error handling loop
commit
c7c4e7ff8047e43c45628b85ac200582e9404c39 upstream.
If a SCSI command times out it is passed to the SCSI error
handler. The SCSI error handler will try to abort the commands that
timed out. If aborting fails, a device reset will be attempted. If
the device reset also fails a host reset will be attempted. If the
host reset also fails the whole procedure will be repeated.
srp_abort() and srp_reset_device() fail for a QP in the error state.
srp_reset_host() fails after host removal has started. Hence if the
SCSI error handler gets invoked after host removal has started and
with the QP in the error state an endless loop will be triggered.
Modify the SCSI error handling functions in ib_srp as follows:
- Abort SCSI commands properly even if the QP is in the error state.
- Make srp_reset_host() reset SCSI requests even after host removal
has already started or if reconnecting fails.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dave@thedillows.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Thu, 21 Feb 2013 17:18:00 +0000 (17:18 +0000)]
IB/srp: Avoid sending a task management function needlessly
commit
3780d1f08856f692116bcf026e4acf1c521df1c7 upstream.
Do not send a task management function if sending will fail anyway
because either there is no RDMA/RC connection or the QP is in the
error state.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dave@thedillows.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Thu, 21 Feb 2013 17:16:54 +0000 (17:16 +0000)]
IB/srp: Track connection state properly
commit
e1b2f13aba9ff714d23ecd4a950e744ee7ad72e1 upstream.
Remove an assignment that incorrectly overwrites the connection state
update by srp_connect_target().
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dave@thedillows.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Zeitz [Mon, 25 Feb 2013 08:53:35 +0000 (09:53 +0100)]
ALSA: emu10k1: Load firmware when it was already cached
commit
b56ddbe55a363eee4ff7410a97050dad08215f7c upstream.
This expands the regression fix from
d28215996b0c3a900411769039aa3c54cf7008ab.
The firmware also needs to be loaded when it was already cached.
Signed-off-by: Florian Zeitz <florob@babelmonkeys.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mihail Zenkov [Fri, 22 Feb 2013 11:25:27 +0000 (11:25 +0000)]
ALSA: emu10k1: Fix regression in emu1010 firmware loading
commit
d28215996b0c3a900411769039aa3c54cf7008ab upstream.
This patch fix regression in emu1010 firmware loading after
http://git.alsa-project.org/?p=alsa-kprivate.git;a=commitdiff;h=
b209c4dfcd960ab176d4746ab7dc442a3edb4575
I just revert small part of this commit. Tested on emu1212m pci.
Signed-off-by: Mihail Zenkov <mihail.zenkov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Henningsson [Fri, 22 Feb 2013 09:16:28 +0000 (10:16 +0100)]
ALSA: hda - hdmi: Make jacks phantom, if they're not detectable
commit
30efd8debd1ef30be342d374f01e993509f5b76b upstream.
Just as for analog codecs, a jack that isn't suitable for detection
(in this case, NO_PRESENCE was set) should be a phantom Jack
instead of a normal one.
Thanks to Raymond Yau for spotting.
BugLink: https://bugs.launchpad.net/bugs/961286
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=903869
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Mon, 25 Feb 2013 08:48:45 +0000 (09:48 +0100)]
ALSA: bt87x: Make load_all parameter working again
commit
aacfddfdadb3540651d263245069631f341e953a upstream.
Along with a clean up commit [
e9f66d9b9: ALSA: pci: clean up using
module_pci_driver()], bt87x driver lost the functionality of load_all
parameter. This patch does a partial revert of the commit only for
bt87x.c to recover it.
Reported-by: Clemens Ladisch <cladisch@googlemail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Wed, 27 Feb 2013 16:36:04 +0000 (08:36 -0800)]
mm: do not grow the stack vma just because of an overrun on preceding vma
commit
09884964335e85e897876d17783c2ad33cf8a2e0 upstream.
The stack vma is designed to grow automatically (marked with VM_GROWSUP
or VM_GROWSDOWN depending on architecture) when an access is made beyond
the existing boundary. However, particularly if you have not limited
your stack at all ("ulimit -s unlimited"), this can cause the stack to
grow even if the access was really just one past *another* segment.
And that's wrong, especially since we first grow the segment, but then
immediately later enforce the stack guard page on the last page of the
segment. So _despite_ first growing the stack segment as a result of
the access, the kernel will then make the access cause a SIGSEGV anyway!
So do the same logic as the guard page check does, and consider an
access to within one page of the next segment to be a bad access, rather
than growing the stack to abut the next segment.
Reported-and-tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 28 Feb 2013 13:39:14 +0000 (05:39 -0800)]
Linux 3.8.1
Ben Skeggs [Sat, 16 Feb 2013 02:10:38 +0000 (12:10 +1000)]
drm/nv50/devinit: reverse the logic for running encoder init scripts
commit
ac8cc241a81941932da44993242e68c62e115ec7 upstream.
A single U encoder table can match multiple DCB entries, whereas the
reverse is not true and can lead to us not matching a DCB entry at
all, and fail to initialise some encoders.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Skeggs [Sat, 16 Feb 2013 02:01:59 +0000 (12:01 +1000)]
drm/nouveau/bios: store a type/mask hash in parsed dcb data
commit
8e992c8d9eebc2bd3246252ee5c0422dbbbce7ae upstream.
Matches format used by a couple of other vbios tables, useful
to have laying around already calculated.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Skeggs [Tue, 12 Feb 2013 00:16:31 +0000 (10:16 +1000)]
drm/nouveau/bios: parse external transmitter type if off-chip
commit
f3ed1048715f2edc10c4dda6148b60e93f6282ed upstream.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabio Baltieri [Mon, 7 Jan 2013 16:47:41 +0000 (17:47 +0100)]
usb: musb: ux500: use clk_prepare_enable and clk_disable_unprepare
commit
99d17cfa3bbc6f4edb175f819af59c6b9e245e82 upstream.
This patch converts the module to use clk_prepare_enable and
clk_disable_unprepare variants as required by common clock framework.
Without this the system crash during probe function.
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ming Lei [Fri, 4 Jan 2013 15:13:58 +0000 (23:13 +0800)]
usb: musb: fix dependency on transceiver driver
commit
25736e0c8269e9613aa6036fbc591818daa30d14 upstream.
This patch let glue driver return -EPROBE_DEFER if the transceiver
is not readly, so we can support defer probe on musb to fix the
below error on 3.7-rc5 if transceiver drivers are built as module:
[ 19.052490] unable to find transceiver of type USB2 PHY
[ 19.072052] HS USB OTG: no transceiver configured
[ 19.076995] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -19
[ 19.089355] musb-hdrc: probe of musb-hdrc.0.auto rejects match -19
[ 19.096771] driver: 'musb-omap2430': driver_bound: bound to device 'musb-omap2430'
[ 19.105194] bus: 'platform': really_probe: bound device musb-omap2430 to driver musb-omap2430
[ 19.174407] bus: 'platform': add driver twl4030_usb
[ 19.179656] bus: 'platform': driver_probe_device: matched device twl4030_usb with driver twl4030_usb
[ 19.202270] bus: 'platform': really_probe: probing driver twl4030_usb with device twl4030_usb
[ 19.214172] twl4030_usb twl4030_usb: HW_CONDITIONS 0xc0/192; link 3
[ 19.239624] musb-omap2430 musb-omap2430: musb core is not yet ready
[ 19.246765] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 19.254516] driver: 'twl4030_usb': driver_bound: bound to device 'twl4030_usb'
[ 19.263580] bus: 'platform': really_probe: bound device twl4030_usb to driver twl4030_usb
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ming Lei [Fri, 4 Jan 2013 15:13:06 +0000 (23:13 +0800)]
usb: musb: core: fix failure path
commit
681d1e8761ca773967bce9bd1bb2896f07279551 upstream.
In the fail1~fail5 failure path, pm_runtime_disable() should
be called to avoid 'Unbalanced pm_runtime_enable' error in
next probe() which may be triggered by defer probe or next
'modprobe musb_hdrc'.
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josh Boyer [Thu, 14 Feb 2013 14:39:09 +0000 (09:39 -0500)]
USB: usb-storage: unusual_devs update for Super TOP SATA bridge
commit
18e03310b5caa6d11c1a8c61b982c37047693fba upstream.
The current entry in unusual_cypress.h for the Super TOP SATA bridge devices
seems to be causing corruption on newer revisions of this device. This has
been reported in Arch Linux and Fedora. The original patch was tested on
devices with bcdDevice of 1.60, whereas the newer devices report bcdDevice
as 2.20. Limit the UNUSUAL_DEV entry to devices less than 2.20.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=909591
The Arch Forum post on this is here:
https://bbs.archlinux.org/viewtopic.php?id=152011
Reported-by: Carsten S. <carsteniq@yahoo.com>
Tested-by: Carsten S. <carsteniq@yahoo.com>
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fangxiaozhi [Thu, 7 Feb 2013 07:32:07 +0000 (15:32 +0800)]
USB: storage: properly handle the endian issues of idProduct
commit
cd060956c5e97931c3909e4a808508469c0bb9f6 upstream.
1. The idProduct is little endian, so make sure its value to be
compatible with the current CPU. Make no break on big endian processors.
Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roger Quadros [Thu, 14 Feb 2013 15:08:09 +0000 (17:08 +0200)]
USB: ehci-omap: Fix autoloading of module
commit
04753523266629b1cd0518091da1658755787198 upstream.
The module alias should be "ehci-omap" and not
"omap-ehci" to match the platform device name.
The omap-ehci module should now autoload correctly.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bjørn Mork [Wed, 13 Feb 2013 22:41:34 +0000 (23:41 +0100)]
USB: option: add Huawei "ACM" devices using protocol = vendor
commit
1f3f687722fd9b29a0c2a85b4844e3b2a3585c63 upstream.
The USB device descriptor of one identity presented by a few
Huawei morphing devices have serial functions with class codes
02/02/ff, indicating CDC ACM with a vendor specific protocol. This
combination is often used for MSFT RNDIS functions, and the CDC
ACM class driver will therefore ignore such functions.
The CDC ACM class driver cannot support functions with only 2
endpoints. The underlying serial functions of these modems are
also believed to be the same as for alternate device identities
already supported by the option driver. Letting the same driver
handle these functions independently of the current identity
ensures consistent handling and user experience.
There is no need to blacklist these devices in the rndis_host
driver. Huawei serial functions will either have only 2 endpoints
or a CDC ACM functional descriptor with bmCapabilities != 0, making
them correctly ignored as "non RNDIS" by that driver.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bjørn Mork [Tue, 12 Feb 2013 12:42:24 +0000 (13:42 +0100)]
USB: option: add Yota / Megafon M100-1 4g modem
commit
cd565279e51bedee1b2988e84f9b3bef485adeb6 upstream.
Interface layout:
00 CD-ROM
01 debug COM port
02 AP control port
03 modem
04 usb-ethernet
Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0408 ProdID=ea42 Rev= 0.00
S: Manufacturer=Qualcomm, Incorporated
S: Product=Qualcomm CDMA Technologies MSM
S: SerialNumber=353568051xxxxxx
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bjørn Mork [Wed, 23 Jan 2013 09:44:36 +0000 (10:44 +0100)]
USB: option: add and update Alcatel modems
commit
f8f0302bbcbd1b14655bef29f6996a2152be559d upstream.
Adding three currently unsupported modems based on information
from .inf driver files:
Diag VID_1BBB&PID_0052&MI_00
AGPS VID_1BBB&PID_0052&MI_01
VOICE VID_1BBB&PID_0052&MI_02
AT VID_1BBB&PID_0052&MI_03
Modem VID_1BBB&PID_0052&MI_05
wwan VID_1BBB&PID_0052&MI_06
Diag VID_1BBB&PID_00B6&MI_00
AT VID_1BBB&PID_00B6&MI_01
Modem VID_1BBB&PID_00B6&MI_02
wwan VID_1BBB&PID_00B6&MI_03
Diag VID_1BBB&PID_00B7&MI_00
AGPS VID_1BBB&PID_00B7&MI_01
VOICE VID_1BBB&PID_00B7&MI_02
AT VID_1BBB&PID_00B7&MI_03
Modem VID_1BBB&PID_00B7&MI_04
wwan VID_1BBB&PID_00B7&MI_05
Updating the blacklist info for the X060S_X200 and X220_X500D,
reserving interfaces for a wwan driver, based on
wwan VID_1BBB&PID_0000&MI_04
wwan VID_1BBB&PID_0017&MI_06
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej Sosnowski [Wed, 23 May 2012 15:27:07 +0000 (17:27 +0200)]
dca: check against empty dca_domains list before unregister provider
commit
c419fcfd071cf34ba00f9f65282583772d2655e7 upstream.
When providers get blocked unregister_dca_providers() is called ending up
with dca_providers and dca_domain lists emptied. Dca should be prevented from
trying to unregister any provider if dca_domain list is found empty.
Reported-by: Jiang Liu <jiang.liu@huawei.com>
Tested-by: Gaohuai Han <hangaohuai@huawei.com>
Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <djbw@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guennadi Liakhovetski [Wed, 28 Nov 2012 06:49:47 +0000 (06:49 +0000)]
dma: sh: Don't use ENODEV for failing slave lookup
commit
7c1119bdd650fa58dad8157bc75c5fcf6ed97843 upstream.
If dmaengine driver's .device_alloc_chan_resources() method returns -ENODEV,
dma_request_channel() will decide, that the driver has been removed and will
remove the device from its list. To prevent this use ENXIO if a slave lookup
fails.
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Magnus Damm [Tue, 12 Feb 2013 15:56:13 +0000 (00:56 +0900)]
gpio: em: Use irq_domain_add_simple() to fix runtime error
commit
c7886b18273b07042e25e8d3ba5c983837b84123 upstream.
Adjust the gpio-em.c driver to reconsider the pdata->irq_base
variable. Non-DT board code like for instance board-kzm9d.c
needs to operate of a static IRQ range for platform devices.
So this patch is updating the code to make use of the function
irq_domain_add_simple() instead of irq_domain_add_linear().
Fixes a EMEV2 / KZM9D runtime error caused by the following commit:
7385500 gpio/em: convert to linear IRQ domain
Signed-off-by: Magnus Damm <damm@opensource.se>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Reported-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roger Quadros [Thu, 14 Feb 2013 15:08:08 +0000 (17:08 +0200)]
USB: ehci-omap: Don't free gpios that we didn't request
commit
428525f97153505e83983460a8d08a3210aa6b8a upstream.
This driver does not request any gpios so don't free them.
Fixes L3 bus error on multiple modprobe/rmmod of ehci_hcd
with ehci-omap in use.
Without this patch, EHCI will break on repeated insmod/rmmod
of ehci_hcd for all OMAP2+ platforms that use EHCI and
set 'phy_reset = true' in usbhs_omap_board_data.
i.e.
board-3430sdp.c: .phy_reset = true,
board-3630sdp.c: .phy_reset = true,
board-am3517crane.c: .phy_reset = true,
board-am3517evm.c: .phy_reset = true,
board-cm-t3517.c: .phy_reset = true,
board-cm-t35.c: .phy_reset = true,
board-devkit8000.c: .phy_reset = true,
board-igep0020.c: .phy_reset = true,
board-igep0020.c: .phy_reset = true,
board-omap3beagle.c: .phy_reset = true,
board-omap3evm.c: .phy_reset = true,
board-omap3pandora.c: .phy_reset = true,
board-omap3stalker.c: .phy_reset = true,
board-omap3touchbook.c: .phy_reset = true,
board-omap4panda.c: .phy_reset = false,
board-overo.c: .phy_reset = true,
board-zoom.c: .phy_reset = true,
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Tue, 26 Feb 2013 21:37:57 +0000 (22:37 +0100)]
mac80211: always unblock CSA queue stop when disconnecting
Commit
5b36ebd8249f403c7edf7cf68d68e9a0d0f55243 upstream.
In some cases when disconnecting after (or during?) CSA
the queues might not recover, and then the only way to
recover is reloading the module.
Fix this by always unblocking the queue CSA reason when
disconnecting.
Reported-by: Jan-Michael Brummer <jan.brummer@tabos.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang [Thu, 21 Feb 2013 23:32:27 +0000 (23:32 +0000)]
vlan: adjust vlan_set_encap_proto() for its callers
[ Upstream commit
da8c87241c26aac81a64c7e4d21d438a33018f4e ]
There are two places to call vlan_set_encap_proto():
vlan_untag() and __pop_vlan_tci().
vlan_untag() assumes skb->data points after mac addr, otherwise
the following code
vhdr = (struct vlan_hdr *) skb->data;
vlan_tci = ntohs(vhdr->h_vlan_TCI);
__vlan_hwaccel_put_tag(skb, vlan_tci);
skb_pull_rcsum(skb, VLAN_HLEN);
won't be correct. But __pop_vlan_tci() assumes points _before_
mac addr.
In vlan_set_encap_proto(), it looks for some magic L2 value
after mac addr:
rawp = skb->data;
if (*(unsigned short *) rawp == 0xFFFF)
...
Therefore __pop_vlan_tci() is obviously wrong.
A quick fix is avoiding using skb->data in vlan_set_encap_proto(),
use 'vhdr+1' is always correct in both cases.
Signed-off-by: Cong Wang <amwang@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jesse Gross <jesse@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Krause [Sat, 23 Feb 2013 01:13:47 +0000 (01:13 +0000)]
sock_diag: Fix out-of-bounds access to sock_diag_handlers[]
[ Upstream commit
6e601a53566d84e1ffd25e7b6fe0b6894ffd79c0 ]
Userland can send a netlink message requesting SOCK_DIAG_BY_FAMILY
with a family greater or equal then AF_MAX -- the array size of
sock_diag_handlers[]. The current code does not test for this
condition therefore is vulnerable to an out-of-bound access opening
doors for a privilege escalation.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kleber Sacilotto de Souza [Fri, 22 Feb 2013 19:14:52 +0000 (19:14 +0000)]
mlx4_en: fix allocation of CPU affinity reverse-map
[ Upstream commit
3770699675dd1b8fc1e86ff369eb3cce44e10082 ]
The mlx4_en driver allocates the number of objects for the CPU affinity
reverse-map based on the number of rx rings of the device. However,
mlx4_assign_eq() calls irq_cpu_rmap_add() as many times as IRQ's are
assigned to EQ's, which can be as large as mlx4_dev->caps.comp_pool. If
caps.comp_pool is larger than rx_ring_num we will eventually hit the
BUG_ON() in cpu_rmap_add().
Fix this problem by allocating space for the maximum number of CPU
affinity reverse-map objects we might want to add.
Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kleber Sacilotto de Souza [Fri, 22 Feb 2013 14:58:02 +0000 (14:58 +0000)]
mlx4_en: fix allocation of device tx_cq
[ Upstream commit
427a96252d8eee7b9bbafce15bd37fa3387ede55 ]
The memory to hold the network device tx_cq is not being allocated with
the correct size in mlx4_en_init_netdev(). It should use MAX_TX_RINGS
instead of MAX_RX_RINGS. This can cause problems if the number of tx
rings being used is greater than MAX_RX_RINGS.
Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yuchung Cheng [Fri, 22 Feb 2013 08:59:06 +0000 (08:59 +0000)]
tcp: fix SYN-data space mis-accounting
[ Upstream commit
1b63edd6ecc55c3a61b40297b49e2323783bddfd ]
In fast open the sender unncessarily reduces the space available
for data in SYN by 12 bytes. This is because in the sender
incorrectly reserves space for TS option twice in tcp_send_syn_data():
tcp_mtu_to_mss() already accounts for TS option space. But it further
reserves MAX_TCP_OPTION_SPACE when computing the payload space.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Li Wei [Thu, 21 Feb 2013 22:18:44 +0000 (22:18 +0000)]
ipv4: fix error handling in icmp_protocol.
[ Upstream commit
5b0520425e5ea81ba95ec486dd6bbb59a09fff0e ]
Now we handle icmp errors in each transport protocol's err_handler,
for icmp protocols, that is ping_err. Since this handler only care
of those icmp errors triggered by echo request, errors triggered
by echo reply(which sent by kernel) are sliently ignored.
So wrap ping_err() with icmp_err() to deal with those icmp errors.
Signed-off-by: Li Wei <lw@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 21 Feb 2013 12:18:52 +0000 (12:18 +0000)]
ipv6: use a stronger hash for tcp
[ Upstream commit
08dcdbf6a7b9d14c2302c5bd0c5390ddf122f664 ]
It looks like its possible to open thousands of TCP IPv6
sessions on a server, all landing in a single slot of TCP hash
table. Incoming packets have to lookup sockets in a very
long list.
We should hash all bits from foreign IPv6 addresses, using
a salt and hash mix, not a simple XOR.
inet6_ehashfn() can also separately use the ports, instead
of xoring them.
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Li Wei [Thu, 21 Feb 2013 00:09:54 +0000 (00:09 +0000)]
ipv4: fix a bug in ping_err().
[ Upstream commit
b531ed61a2a2a77eeb2f7c88b49aa5ec7d9880d8 ]
We should get 'type' and 'code' from the outer ICMP header.
Signed-off-by: Li Wei <lw@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YOSHIFUJI Hideaki [Wed, 20 Feb 2013 00:29:08 +0000 (00:29 +0000)]
ipv6: fix race condition regarding dst->expires and dst->from.
[ Upstream commit
ecd9883724b78cc72ed92c98bcb1a46c764fff21 ]
Eric Dumazet wrote:
| Some strange crashes happen in rt6_check_expired(), with access
| to random addresses.
|
| At first glance, it looks like the RTF_EXPIRES and
| stuff added in commit
1716a96101c49186b
| (ipv6: fix problem with expired dst cache)
| are racy : same dst could be manipulated at the same time
| on different cpus.
|
| At some point, our stack believes rt->dst.from contains a dst pointer,
| while its really a jiffie value (as rt->dst.expires shares the same area
| of memory)
|
| rt6_update_expires() should be fixed, or am I missing something ?
|
| CC Neil because of https://bugzilla.redhat.com/show_bug.cgi?id=892060
Because we do not have any locks for dst_entry, we cannot change
essential structure in the entry; e.g., we cannot change reference
to other entity.
To fix this issue, split 'from' and 'expires' field in dst_entry
out of union. Once it is 'from' is assigned in the constructor,
keep the reference until the very last stage of the life time of
the object.
Of course, it is unsafe to change 'from', so make rt6_set_from simple
just for fresh entries.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Neil Horman <nhorman@tuxdriver.com>
CC: Gao Feng <gaofeng@cn.fujitsu.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reported-by: Steinar H. Gunderson <sesse@google.com>
Reviewed-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Tue, 19 Feb 2013 18:42:03 +0000 (10:42 -0800)]
ppp: set qdisc_tx_busylock to avoid LOCKDEP splat
[ Upstream commit
303c07db487be59ae9fda10600ea65ca11c21497 ]
If a qdisc is installed on a ppp device, its possible to get
a lockdep splat under stress, because nested dev_queue_xmit() can
lock busylock a second time (on a different device, so its a false
positive)
Avoid this problem using a distinct lock_class_key for ppp
devices.
Reported-by: Yanko Kaneti <yaneti@declera.com>
Tested-by: Yanko Kaneti <yaneti@declera.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Romain KUNTZ [Mon, 18 Feb 2013 02:36:24 +0000 (02:36 +0000)]
xfrm: release neighbor upon dst destruction
[ Upstream commit
18cf0d0784b4a634472ed24d0d7ca1c721d93e90 ]
Neighbor is cloned in xfrm6_fill_dst but seems to never be released.
Neighbor entry should be released when XFRM6 dst entry is destroyed
in xfrm6_dst_destroy, otherwise references may be kept forever on
the device pointed by the neighbor entry.
I may not have understood all the subtleties of XFRM & dst so I would
be happy to receive comments on this patch.
Signed-off-by: Romain Kuntz <r.kuntz@ipflavors.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ying Xue [Fri, 15 Feb 2013 22:28:25 +0000 (22:28 +0000)]
net: fix a compile error when SOCK_REFCNT_DEBUG is enabled
[ Upstream commit
dec34fb0f5b7873de45132a84a3af29e61084a6b ]
When SOCK_REFCNT_DEBUG is enabled, below build error is met:
kernel/sysctl_binary.o: In function `sk_refcnt_debug_release':
include/net/sock.h:1025: multiple definition of `sk_refcnt_debug_release'
kernel/sysctl.o:include/net/sock.h:1025: first defined here
kernel/audit.o: In function `sk_refcnt_debug_release':
include/net/sock.h:1025: multiple definition of `sk_refcnt_debug_release'
kernel/sysctl.o:include/net/sock.h:1025: first defined here
make[1]: *** [kernel/built-in.o] Error 1
make: *** [kernel] Error 2
So we decide to make sk_refcnt_debug_release static to eliminate
the error.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Vrabel [Thu, 14 Feb 2013 03:18:58 +0000 (03:18 +0000)]
xen-netback: cancel the credit timer when taking the vif down
[ Upstream commit
3e55f8b306cf305832a4ac78aa82e1b40e818ece ]
If the credit timer is left armed after calling
xen_netbk_remove_xenvif(), then it may fire and attempt to schedule
the vif which will then oops as vif->netbk == NULL.
This may happen both in the fatal error path and during normal
disconnection from the front end.
The sequencing during shutdown is critical to ensure that: a)
vif->netbk doesn't become unexpectedly NULL; and b) the net device/vif
is not freed.
1. Mark as unschedulable (netif_carrier_off()).
2. Synchronously cancel the timer.
3. Remove the vif from the schedule list.
4. Remove it from it netback thread group.
5. Wait for vif->refcnt to become 0.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reported-by: Christopher S. Aker <caker@theshore.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Vrabel [Thu, 14 Feb 2013 03:18:57 +0000 (03:18 +0000)]
xen-netback: correctly return errors from netbk_count_requests()
[ Upstream commit
35876b5ffc154c357476b2c3bdab10feaf4bd8f0 ]
netbk_count_requests() could detect an error, call
netbk_fatal_tx_error() but return 0. The vif may then be used
afterwards (e.g., in a call to netbk_tx_error().
Since netbk_fatal_tx_error() could set vif->refcnt to 1, the vif may
be freed immediately after the call to netbk_fatal_tx_error() (e.g.,
if the vif is also removed).
Netback thread Xenwatch thread
-------------------------------------------
netbk_fatal_tx_err() netback_remove()
xenvif_disconnect()
...
free_netdev()
netbk_tx_err() Oops!
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reported-by: Christopher S. Aker <caker@theshore.net>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bjørn Mork [Wed, 13 Feb 2013 12:09:52 +0000 (12:09 +0000)]
net: cdc_ncm: fix probing of devices with multiple control interface altsettings
[ Upstream commit
f350ca03703133c94fe742f6fa6ff0fd8f5a9a09 ]
commit bd329e1 ("net: cdc_ncm: do not bind to NCM compatible MBIM devices")
added a test for a CDC MBIM altsetting, implementing the cdc_ncm part of
MBIM backward compatibility support. This intentionally made the driver
behave differently for CDC NCM devices with 2 alternate settings for the
Communication interface, depending on whether or not CONFIG_USB_NET_CDC_MBIM
was enabled. This is correct iff alternate setting #1 really *is* a MBIM
setting. If not, then NCM probing will use a different altsetting than before,
possibly causing probing failures depending on CONFIG_USB_NET_CDC_MBIM.
Fix by setting the altsetting back to default after the test, restoring the
previous behaviour for non MBIM devices.
This bug causes probing of Huawei E3276 devices to fail when the MBIM driver
is enabled, because these devices have a second alternate setting with no CDC
functional descriptors.
Reported-and-tested-by: Jonathan A. <yo.natan@hotmail.com>
Cc: Greg Suarez <gsuarez@smithmicro.com>
Cc: Alexey Orishko <alexey.orishko@stericsson.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Herrmann [Mon, 18 Feb 2013 00:47:15 +0000 (01:47 +0100)]
HID: wiimote: fix nunchuck button parser
commit
89bdd0c6f38ccf0de43d5a36ede384a730f3394e upstream.
The buttons of the Wii Remote Nunchuck extension are actually active low.
Fix the parser to forward the inverted values. The comment in the function
always said "0 == pressed" but the implementation was wrong from the
beginning.
Reported-by: Victor Quicksilver <victor.quicksilver@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Balaji T K [Fri, 25 Jan 2013 11:30:30 +0000 (17:00 +0530)]
mmc: core: expose RPMB partition only for CMD23 capable hosts
commit
d0123ccac55088811bde4f76c4a3fdbd39c3cfba upstream.
SET_BLOCK_COUNT CMD23 is needed for all access to RPMB partition. If
block count is not set by CMD23, all subsequent read/write commands fail
as per eMMC specification. So, If the host does not support CMD23, do not
expose RPMB partition.
Accessing RPMB partition can cause hang / huge delay for hosts which do
not support CMD23.
Signed-off-by: Balaji T K <balajitk@ti.com>
Reported-and-Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shawn Guo [Tue, 15 Jan 2013 15:30:27 +0000 (23:30 +0800)]
mmc: sdhci-esdhc-imx: fix host version read
commit
ef4d0888bb7e1b963880f086575081c3d39cad2d upstream.
When commit 95a2482 (mmc: sdhci-esdhc-imx: add basic imx6q usdhc
support) works around host version issue on imx6q, it gets the
register address fixup "reg ^= 2" lost for imx25/35/51/53 esdhc.
Thus, the controller version on these SoCs is wrongly identified
as v1 while it's actually v2.
Add the address fixup back and take a different approach to correct
imx6q host version, so that the host version read gets back to work
for all SoCs.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Airlie [Fri, 25 Jan 2013 01:38:56 +0000 (11:38 +1000)]
fbcon: fix locking harder
commit
054430e773c9a1e26f38e30156eff02dedfffc17 upstream.
Okay so Alan's patch handled the case where there was no registered fbcon,
however the other path entered in set_con2fb_map pit.
In there we called fbcon_takeover, but we also took the console lock in a couple
of places. So push the console lock out to the callers of set_con2fb_map,
this means fbmem and switcheroo needed to take the lock around the fb notifier
entry points that lead to this.
This should fix the efifb regression seen by Maarten.
Tested-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: Lu Hua <huax.lu@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 25 Jan 2013 00:28:18 +0000 (10:28 +1000)]
fb: Yet another band-aid for fixing lockdep mess
commit
e93a9a868792ad71cdd09d75e5a02d8067473c4e upstream.
I've still got lockdep warnings even after Alan's patch, and it seems that
yet more band aids are required to paper over similar paths for
unbind_con_driver() and unregister_con_driver(). After this hack, lockdep
warnings are finally gone.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Fri, 25 Jan 2013 00:28:15 +0000 (10:28 +1000)]
fb: rework locking to fix lock ordering on takeover
commit
50e244cc793d511b86adea24972f3a7264cae114 upstream.
Adjust the console layer to allow a take over call where the caller
already holds the locks. Make the fb layer lock in order.
This is partly a band aid, the fb layer is terminally confused about the
locking rules it uses for its notifiers it seems.
[akpm@linux-foundation.org: remove stray non-ascii char, tidy comment]
[akpm@linux-foundation.org: export do_take_over_console()]
[airlied: cleanup another non-ascii char]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Jiri Kosina <jkosina@suse.cz>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Airlie [Thu, 24 Jan 2013 06:12:41 +0000 (16:12 +1000)]
fbcon: don't lose the console font across generic->chip driver switch
commit
ae1287865f5361fa138d4d3b1b6277908b54eac9 upstream.
If grub2 loads efifb/vesafb, then when systemd starts it can set the console
font on that framebuffer device, however when we then load the native KMS
driver, the first thing it does is tear down the generic framebuffer driver.
The thing is the generic code is doing the right thing, it frees the font
because otherwise it would leak memory. However we can assume that if you
are removing the generic firmware driver (vesa/efi/offb), that a new driver
*should* be loading soon after, so we effectively leak the font.
However the old code left a dangling pointer in vc->vc_font.data and we
can now reuse that dangling pointer to load the font into the new
driver, now that we aren't freeing it.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=892340
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anatolij Gustschin [Sat, 19 Jan 2013 09:59:10 +0000 (10:59 +0100)]
drivers/video: fsl-diu-fb: fix bugs in interrupt handling
commit
b2639b5f1d01f218dc95537a1c352b3a551c4dd5 upstream.
Since commit
f74de500 "drivers/video: fsl-diu-fb: streamline
enabling of interrupts" the interrupt handling in the driver
is broken. Enabling diu interrupt causes an interrupt storm and
results in system lockup.
The cookie for the interrupt handler function passed to request_irq()
is wrong (it must be a pointer to the diu struct, and not the address
of the pointer to the diu struct). As a result the interrupt handler
can not read diu registers and acknowledge the interrupt. Fix cookie
arguments for request_irq() and free_irq().
Registering the diu interrupt handler in probe() must happen before
install_fb() calls since this function registers framebuffer devices
and if fbcon tries to take over framebuffer after registering a frame
buffer device, it will call fb_open of the diu driver and enable the
interrupts. At this time the diu interrupt handler must be registered
already.
Disabling the interrupts in fsl_diu_release() must happen only if all
other AOIs are closed. Otherwise closing an overlay plane will disable
the interrupts even if the primary frame buffer plane is opened. Add
an appropriate check in the release function.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Timur Tabi <timur@tabi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anatolij Gustschin [Thu, 17 Jan 2013 20:28:37 +0000 (21:28 +0100)]
drivers/video: fsl-diu-fb: fix pixel formats for 24 and 16 bpp
commit
5d3cc311a76073f6e0a27c0752f7e41f69e95ea7 upstream.
Framebuffer colors for 24 and 16 bpp are currently wrong. The order
of the color component arguments in the MAKE_PF() is not natural
and causes some confusion. The generated pixel format values for 24
and 16 bpp depths do not much the values in the comments.
Fix the macro arguments to be in the natural RGB order and adjust
the arguments for all depths to generate correct pixel format values
(equal to the values mentioned in the comments).
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Timur Tabi <timur@tabi.org>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jean Delvare [Sun, 16 Dec 2012 21:00:50 +0000 (22:00 +0100)]
pcmcia/vrc4171: Add missing spinlock init
commit
811af9723859884f2f771f3174f3ddedab7c53b5 upstream.
It doesn't seem this spinlock was properly initialized. This bug was
introduced by commit
7a410e8d4d97457c8c381e2de9cdc7bd3306badc.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John David Anglin [Tue, 15 Jan 2013 00:45:00 +0000 (19:45 -0500)]
Purge existing TLB entries in set_pte_at and ptep_set_wrprotect
commit
7139bc1579901b53db7e898789e916ee2fb52d78 upstream.
This patch goes a long way toward fixing the minifail bug, and
it significantly improves the stability of SMP machines such as
the rp3440. When write protecting a page for COW, we need to
purge the existing translation. Otherwise, the COW break
doesn't occur as expected because the TLB may still have a stale entry
which allows writes.
[jejb: fix up checkpatch errors]
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thadeu Lima de Souza Cascardo [Fri, 28 Dec 2012 09:13:19 +0000 (09:13 +0000)]
powerpc/eeh: Fix crash when adding a device in a slot with DDW
commit
6a040ce72598159a74969a2d01ab0ba5ee6536b3 upstream.
The DDW code uses a eeh_dev struct from the pci_dev. However, this is
not set until eeh_add_device_late is called.
Since pci_bus_add_devices is called before eeh_add_device_late, the PCI
devices are added to the bus, making drivers' probe hooks to be called.
These will call set_dma_mask, which will call the DDW code, which will
require the eeh_dev struct from pci_dev. This would result in a crash,
due to a NULL dereference.
Calling eeh_add_device_late after pci_bus_add_devices would make the
system BUG, because device files shouldn't be added to devices there
were not added to the system. So, a new function is needed to add such
files only after pci_bus_add_devices have been called.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suzuki K. Poulose [Mon, 7 Jan 2013 00:26:57 +0000 (00:26 +0000)]
uprobes/powerpc: Add dependency on single step emulation
commit
5e249d4528528c9a77da051a89ec7f99d31b83eb upstream.
Uprobes uses emulate_step in sstep.c, but we haven't explicitly specified
the dependency. On pseries HAVE_HW_BREAKPOINT protects us, but 44x has no
such luxury.
Consolidate other users that depend on sstep and create a new config option.
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com>
Cc: linuxppc-dev@ozlabs.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Phileas Fogg [Fri, 22 Feb 2013 23:32:19 +0000 (00:32 +0100)]
powerpc/kexec: Disable hard IRQ before kexec
commit
8520e443aa56cc157b015205ea53e7b9fc831291 upstream.
Disable hard IRQ before kexec a new kernel image.
Not doing it can result in corrupted data in the memory segments
reserved for the new kernel.
Signed-off-by: Phileas Fogg <phileas-fogg@mail.ru>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joonsoo Kim [Sat, 9 Feb 2013 04:52:45 +0000 (05:52 +0100)]
ARM: 7643/1: sched: correct update_sched_clock()
commit
7c4e9ced424be4d36df6a3e3825763e97ee97607 upstream.
If we want load epoch_cyc and epoch_ns atomically,
we should update epoch_cyc_copy first of all.
This notify reader that updating is in progress.
If we update epoch_cyc first like as current implementation,
there is subtle error case.
Look at the below example.
<Initial Condition>
cyc = 9
ns = 900
cyc_copy = 9
== CASE 1 ==
<CPU A = reader> <CPU B = updater>
write cyc = 10
read cyc = 10
read ns = 900
write ns = 1000
write cyc_copy = 10
read cyc_copy = 10
output = (10, 900)
== CASE 2 ==
<CPU A = reader> <CPU B = updater>
read cyc = 9
write cyc = 10
write ns = 1000
read ns = 1000
read cyc_copy = 9
write cyc_copy = 10
output = (9, 1000)
If atomic read is ensured, output should be (9, 900) or (10, 1000).
But, output in example case are not.
So, change updating sequence in order to correct this problem.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Wed, 6 Feb 2013 11:42:23 +0000 (11:42 +0000)]
arm64: compat: use compat_uptr_t type for compat_ucontext.uc_link
commit
c0e01d5d8f15c085236df184e5bc3d79a8b700cd upstream.
struct compat_ucontext * is a 64-bit pointer, so we need to use a
compat_uptr_t instead to avoid declaring a structure incompatible with
what AArch32 userspace expects.
Reported-by: Edmund Grimley-Evans <Edmund.Grimley-Evans@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Wed, 6 Feb 2013 18:25:12 +0000 (18:25 +0000)]
ARM: integrator: ensure ap_syscon_base is initialised when !CONFIG_MMU
commit
ab2a724a2ef9cee5957692257a5d1f08fd7acbbd upstream.
When running on Integrator/AP using atags, ap_syscon_base is initialised
in ->map_io, which isn't called for !MMU platforms.
Instead, initialise the pointer in ->machine_init, as we do when booting
with device-tree.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steffen Trumtrar [Wed, 30 Jan 2013 13:16:00 +0000 (14:16 +0100)]
ARM: i.MX25: clk: parent per5_clk to AHB clock
commit
4b526ca5f627188425184a22ed46c91baa602d43 upstream.
The mxc-timer on the imx25 needs to be derived from the AHB clock.
If a bootloader reparents this clock to the ipg_clk_highfreq, which according
to the datasheet is a valid operation, the system can/will produce lockups/
freezes after some time [1].
This can be forced with code like
while(1)
syscall(SYS_clock_gettime, CLOCK_REALTIME, &tp);
This was already fixed with the commit
"i.MX25 GPT clock fix: ensure correct the clock source" [2],
for 3.1-rc2, but was lost, when i.MX was converted to the common clock framework
("ARM i.MX25: implement clocks using common clock framework") [3]
[1]: http://lists.arm.linux.org.uk/lurker/message/
20130129.161230.
229bda17.en.html
[2]:
2012d9ca2a1381ae3e733330a7f0d1d2f1988bba
[3]:
6bbaec5676e4f475b0d78743cbd4c70a8804ce14
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Tue, 8 Jan 2013 21:58:31 +0000 (21:58 +0000)]
ARM: samsung: fix assembly syntax for new gas
commit
2815774bb38445006074e16251b9ef5123bdc616 upstream.
Recent assembler versions complain about extraneous
whitespace inside [] brackets. This fixes all of
these instances for the samsung platforms. We should
backport this to all kernels that might need to
be built with new binutils.
arch/arm/kernel/entry-armv.S: Assembler messages:
arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r2,[ r6,#(0x10)]'
arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r0,[ r6,#(0x14)]'
arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r2,[ r6,#(0x10)]'
arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r0,[ r6,#(0x14)]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S: Assembler messages:
arch/arm/mach-s3c24xx/sleep-s3c2410.S:48: Error: ARM register expected -- `ldr r7,[ r4 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:49: Error: ARM register expected -- `ldr r8,[ r5 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:50: Error: ARM register expected -- `ldr r9,[ r6 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:64: Error: ARM register expected -- `streq r7,[ r4 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:65: Error: ARM register expected -- `streq r8,[ r5 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:66: Error: ARM register expected -- `streq r9,[ r6 ]'
arch/arm/kernel/debug.S: Assembler messages:
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r2,#((0x0B0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-((0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r2,#((0x0B0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-((0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/mach-s3c24xx/pm-h1940.S: Assembler messages:
arch/arm/mach-s3c24xx/pm-h1940.S:33: Error: ARM register expected -- `ldr pc,[ r0,#((0x0B8)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000)))]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S: Assembler messages:
arch/arm/mach-s3c24xx/sleep-s3c2412.S:60: Error: ARM register expected -- `ldrne r9,[ r1 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:61: Error: ARM register expected -- `strne r9,[ r1 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:62: Error: ARM register expected -- `ldrne r9,[ r2 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:63: Error: ARM register expected -- `strne r9,[ r2 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:64: Error: ARM register expected -- `ldrne r9,[ r3 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:65: Error: ARM register expected -- `strne r9,[ r3 ]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x08)]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x10)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x08)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x10)]'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Ferre [Wed, 30 Jan 2013 14:32:26 +0000 (15:32 +0100)]
ARM: at91/DT: remove atmel,use-dma-* from 9x5 and 9n12 USART nodes
commit
c3f0f282d950a1e87496a2633ed9e924e275ff8c upstream.
Fix the use of USART on both at91sam9x5 and at91sam9n12. In DTS, the
atmel,use-dma-[rx|tx] property is present but a DMA channel cannot be used.
Indeed the connexion between the DMA engine and the slave is not implemented
yet in Device Tree.
Note however that this property is also used for PDC (private DMA) on older
SoCs. This is why the driver alone cannot determine the validity of this
property.
Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Grinberg [Sun, 13 Jan 2013 11:49:47 +0000 (13:49 +0200)]
ARM: PXA3xx: program the CSMSADRCFG register
commit
d107a204154ddd79339203c2deeb7433f0cf6777 upstream.
The Chip Select Configuration Register must be programmed to 0x2 in
order to achieve the correct behavior of the Static Memory Controller.
Without this patch devices wired to DFI and accessed through SMC cannot
be accessed after resume from S2.
Do not rely on the boot loader to program the CSMSADRCFG register by
programming it in the kernel smemc module.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Walleij [Mon, 28 Jan 2013 20:58:22 +0000 (21:58 +0100)]
ARM: 7635/1: versatile: fix the PCI IRQ regression
commit
e3e92a7be6936dff1de80e66b0b683d54e9e02d8 upstream.
The PCI IRQs were regressing due to two things:
- The PCI glue layer was using an hard-coded IRQ 27 offset.
This caused the immediate regression.
- The SIC IRQ mask was inverted (i.e. a bit was indeed set to
one for each valid IRQ on the SIC, but accidentally inverted
in the init call). This has been around forever, but we have
been saved by some other forgiving code that would reserve
IRQ descriptors in this range, as the versatile is
non-sparse.
When the IRQs were bumped up 32 steps so as to avoid using IRQ
zero and avoid touching the 16 legacy IRQs, things broke.
Introduce an explicit valid mask for the IRQs that are active
on the PIC/SIC, and pass that. Use the BIT() macro from
<linux/bitops.h> to make sure we hit the right bits, readily
defined in <mach/platform.h>.
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ryo Tsutsui [Sun, 3 Feb 2013 08:18:00 +0000 (17:18 +0900)]
ASoC: arizona: Fixed a bug in FLL fractional calculation
commit
01f58153aefc158fd690b337d29ad140e963959d upstream.
Previously arizona_calc_fll() was checking if the target frequency is
exactly divisible by reference frequency, but should have been product
of the ratio and the reference frequency.
Also scale down the Lamba and Theta coefficients be under 16-bits in
order to match the registers.
Signed-off-by: Ryo Tsutsui <ryo.tsutsui@wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Rattray [Fri, 1 Feb 2013 15:51:41 +0000 (15:51 +0000)]
ASoC: wm2200: correct IN2L and IN3L digital mute
commit
0d2b6422529a26ac4dee06196524ba9da70cf735 upstream.
Signed-off-by: Chris Rattray <crattray@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Wed, 30 Jan 2013 20:07:29 +0000 (20:07 +0000)]
staging: vt6656: Fix URB submitted while active warning.
commit
ae5943de8c8c4438cbac5cda599ff0b88c224468 upstream.
This error happens because PIPEnsControlOut and PIPEnsControlIn unlock the
spin lock for delay, letting in another thread.
The patch moves the current MP_SET_FLAG to before filling
of sUsbCtlRequest for pControlURB and clears it in event of failing.
Any thread calling either function while fMP_CONTROL_READS or fMP_CONTROL_WRITES
flags set will return STATUS_FAILURE.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Tue, 22 Jan 2013 20:13:34 +0000 (20:13 +0000)]
staging: vt6656: Revert: 64bit fixes: dpc.c incorrect addressing of void structure.
commit
392c6ff87f568d573239b763855160d1f06114de upstream.
The patch was totally wrong and is reverted.
The problem was ultimately fixed by upstream commit.
1ee4c55fc9620451b2a825d793042a7e0775391b
staging: vt6656: Fix inconsistent structure packing
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Tue, 22 Jan 2013 20:12:34 +0000 (20:12 +0000)]
staging: vt6656: revert : 64 bit- Correctly address void structure.
commit
d61ac98a4bd86b3217f0c6e058bd0b3a3282899b upstream.
The patch is wrong and is partially reverted.
The NULL check of pTransmitKey->pvKeyTable is kept.
The problem was ultimately fixed by upstream commit.
1ee4c55fc9620451b2a825d793042a7e0775391b
staging: vt6656: Fix inconsistent structure packing
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 1 Feb 2013 14:51:58 +0000 (14:51 +0000)]
staging: comedi: ni_labpc: correct differential channel sequence for AI commands
commit
4c4bc25d0fa6beaf054c0b4c3b324487f266c820 upstream.
Tuomas <tvainikk _at_ gmail _dot_ com> reported problems getting
meaningful output from a Lab-PC+ in differential mode for AI cmds, but
AI insn reads gave correct readings. He tracked it down to two
problems, one of which is addressed by this patch.
It seems the setting of the channel bits for particular scanning modes
was incorrect for differential mode. (Only half the number of channels
are available in differential mode; comedi refers to them as channels 0,
1, 2 and 3, but the hardware documentation refers to them as channels 0,
2, 4 and 6.) In differential mode, the setting of the channel enable
bits in the command1 register should depend on whether the scan enable
bit is set. Effectively, we need to double the comedi channel number
when the scan enable bit is not set in differential mode. The scan
enable bit gets set when the AI scan mode is `MODE_MULT_CHAN_UP` or
`MODE_MULT_CHAN_DOWN`, and gets cleared when the AI scan mode is
`MODE_SINGLE_CHAN` or `MODE_SINGLE_CHAN_INTERVAL`. The existing test
for whether the comedi channel number needs to be doubled in
differential mode is incorrect in `labpc_ai_cmd()`. This patch corrects
the test.
Thanks to Tuomas for suggesting the fix.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 1 Feb 2013 14:51:57 +0000 (14:51 +0000)]
staging: comedi: ni_labpc: set up command4 register *after* command3
commit
22056e2b46246d97ff0f7c6e21a77b8daa07f02c upstream.
Tuomas <tvainikk _at_ gmail _dot_ com> reported problems getting
meaningful output from a Lab-PC+ in differential mode for AI cmds, but
AI insn reads gave correct readings. He tracked it down to two
problems, one of which is addressed by this patch.
It seems that writing to the command3 register after writing to the
command4 register in `labpc_ai_cmd()` messes up the differential
reference bit setting in the command4 register. Set up the command4
register after the command3 register (as in `labpc_ai_rinsn()`) to avoid
the problem.
Thanks to Tuomas for suggesting the fix.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 28 Jan 2013 16:14:31 +0000 (16:14 +0000)]
staging: comedi: disallow COMEDI_DEVCONFIG on non-board minors
commit
754ab5c0e55dd118273ca2c217c4d95e9fbc8259 upstream.
Comedi has two sorts of minor devices:
(a) normal board minor devices in the range 0 to
COMEDI_NUM_BOARD_MINORS-1 inclusive; and
(b) special subdevice minor devices in the range COMEDI_NUM_BOARD_MINORS
upwards that are used to open the same underlying comedi device as the
normal board minor devices, but with non-default read and write
subdevices for asynchronous commands.
The special subdevice minor devices get created when a board supporting
asynchronous commands is attached to a normal board minor device, and
destroyed when the board is detached from the normal board minor device.
One way to attach or detach a board is by using the COMEDI_DEVCONFIG
ioctl. This should only be used on normal board minors as the special
subdevice minors are too ephemeral. In particular, the change
introduced in commit
7d3135af399e92cf4c9bbc5f86b6c140aab3b88c ("staging:
comedi: prevent auto-unconfig of manually configured devices") breaks
horribly for special subdevice minor devices.
Since there's no legitimate use for the COMEDI_DEVCONFIG ioctl on a
special subdevice minor device node, disallow it and return -ENOTTY.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Minchan Kim [Mon, 28 Jan 2013 01:00:08 +0000 (10:00 +0900)]
staging: zsmalloc: Fix TLB coherency and build problem
commit
9915518887e83764269d5b617d01782893877ed3 upstream.
Recently, Matt Sealey reported he fail to build zsmalloc caused by
using of local_flush_tlb_kernel_range which are architecture dependent
function so !CONFIG_SMP in ARM couldn't implement it so it ends up
build error following as.
MODPOST 216 modules
LZMA arch/arm/boot/compressed/piggy.lzma
AS arch/arm/boot/compressed/lib1funcs.o
ERROR: "v7wbi_flush_kern_tlb_range"
[drivers/staging/zsmalloc/zsmalloc.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
make: *** Waiting for unfinished jobs....
The reason we used that function is copy method by [1]
was really slow in ARM but at that time.
More severe problem is ARM can prefetch speculatively on other CPUs
so under us, other TLBs can have an entry only if we do flush local
CPU. Russell King pointed that. Thanks!
We don't have many choices except using flush_tlb_kernel_range.
My experiment in ARMv7 processor 4 core didn't make any difference with
zsmapbench[2] between local_flush_tlb_kernel_range and flush_tlb_kernel_range
but still page-table based is much better than copy-based.
* bigger is better.
1. local_flush_tlb_kernel_range: 3918795 mappings
2. flush_tlb_kernel_range : 3989538 mappings
3. copy-based: 635158 mappings
This patch replace local_flush_tlb_kernel_range with
flush_tlb_kernel_range which are avaialbe in all architectures
because we already have used it in vmalloc allocator which are
generic one so build problem should go away and performane loss
shoud be void.
[1] f553646, zsmalloc: add page table mapping method
[2] https://github.com/spartacus06/zsmapbench
Reported-by: Matt Sealey <matt@genesi-usa.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Konrad Rzeszutek Wilk <konrad@darnok.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Wilson [Thu, 21 Feb 2013 20:04:31 +0000 (20:04 +0000)]
drm/i915: Handle untiled planes when computing their offsets
commit
bc752862170c135d6c09fb22d79eeb451023568e upstream.
We trim the fb to fit the CRTC by computing the offset of that CRTC to
its nearest tile_row origin. This allows us to use framebuffers that are
larger than the CRTC limits without additional work.
However, we failed to compute the offset for a linear framebuffer
correctly as we treated its x-advance in whole tiles (instead of the
linear increment expected), leaving the CRTC misaligned with its
contents.
Fixes regression from commit
c2c75131244507c93f812862fdbd4f3a37139401
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jul 5 12:17:30 2012 +0200
drm/i915: adjust framebuffer base address on gen4+
v2: Adjust relative x-coordinate after linear alignment (vsyrjala)
v3: Repaint with pokadots (vsyrjala)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61152
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Vetter [Fri, 15 Feb 2013 17:35:30 +0000 (18:35 +0100)]
drm/i915: inverted brightness quirk for Acer Aspire 4736Z
commit
ac4199e0f047546aa40172785e26c82b54bbe811 upstream.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=53881
Cc: Jani Nikula <jani.nikula@intel.com>
Tested-by: Jani Monoses <jani@ubuntu.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Vetter [Thu, 14 Feb 2013 18:46:07 +0000 (19:46 +0100)]
drm/i915: Use HAS_L3_GPU_CACHE in i915_gem_l3_remap
commit
eb32e4584d8e9d6cbec20550d4f91396de2cdb55 upstream.
Yet another remnant ... this might explain why l3 remapping didn't
really work on HSW.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57441
Spotted-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jani Nikula [Thu, 14 Feb 2013 09:23:35 +0000 (11:23 +0200)]
drm/i915: add missing \n to UTS_RELEASE in the error_state
commit
fdfa175d0a9cfa2082ce24e67e284e5acbba452a upstream.
Amending
commit
4518f611ba21ba165ea3714055938a8984a44ff9
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Jan 23 16:16:35 2013 +0100
drm/i915: dump UTS_RELEASE into the error_state
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patrik Jakobsson [Wed, 13 Feb 2013 21:20:22 +0000 (22:20 +0100)]
drm/i915: Set i9xx sdvo clock limits according to specifications
commit
4f7dfb6788dd022446847fbbfbe45e13bedb5be2 upstream.
The Intel PRM says the M1 and M2 divisors must be in the range of 10-20 and 5-9.
Since we do all calculations based on them being register values (which are
subtracted by 2) we need to specify them accordingly.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56359
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika Kuoppala [Fri, 8 Feb 2013 14:35:37 +0000 (16:35 +0200)]
drm/i915: disable shared panel fitter for pipe
commit
24a1f16de97c4cf0029d9acd04be06db32208726 upstream.
If encoder is switched off by BIOS, but the panel fitter is left on,
we never try to turn off the panel fitter and leave it still attached
to the pipe - which can cause blurry output elsewhere.
Based on work by Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58867
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Tested-by: Andreas Sturmlechner <andreas.sturmlechner@gmail.com>
[danvet: Remove the redundant HAS_PCH_SPLIT check and add a tiny
comment.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Vetter [Wed, 6 Feb 2013 10:24:41 +0000 (11:24 +0100)]
drm/i915: write backlight harder
commit
cf0a6584aa6d382f802f2c3cacac23ccbccde0cd upstream.
770c12312ad617172b1a65b911d3e6564fc5aca8 is the first bad commit
commit
770c12312ad617172b1a65b911d3e6564fc5aca8
Author: Takashi Iwai <tiwai@suse.de>
Date: Sat Aug 11 08:56:42 2012 +0200
drm/i915: Fix blank panel at reopening lid
changed the register write sequence for restoring the backlight, which
helped prevent non-working backlights on some machines. Turns out that
the original sequence was the right thing to do for a different set of
machines. Worse, setting the backlight level _after_ enabling it seems
to reset it somehow. So we need to make that one conditional upon the
backlight having been reset to zero, and add the old one back.
Cargo-culting at it's best, but it seems to work.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47941
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Widawsky [Sat, 2 Feb 2013 00:41:14 +0000 (16:41 -0800)]
drm/i915: Fix RC6VIDS encode/decode
commit
7083e05072b88d503d257b6f012ce56367f3ac97 upstream.
The RC6 VIDS has a linear ramp starting at 250mv, which means any values
below 250 are invalid. The old buggy macros tried to adjust for this to
be more flexible, but there is no need. As Dan pointed out the ENCODE
only ever has one value. The only invalid value for decode is an input
of 0 which means something is really wonky, and the cases where DECODE
are used either don't matter (debug values), or would be implicitly
correct (the check for less than 450).
This patch makes simpler, easier to read macros which are actually
correct. Maybe this patch can actually fix some bugs now.
Thanks to Dan for catching this. /me hides
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Widawsky [Tue, 29 Jan 2013 20:00:15 +0000 (12:00 -0800)]
drm/i915: Fix CAGF for HSW
commit
f82855d342b6c8483c56e6d2e200a71731509a39 upstream.
The shift changed, hurray.
Reported-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Wilson [Tue, 8 Jan 2013 11:02:57 +0000 (11:02 +0000)]
drm/i915: Only run idle processing from i915_gem_retire_requests_worker
commit
725a5b54028916cd2511a251c5b5b13d1715addc upstream.
When adding the fb idle detection to mark-inactive, it was forgotten
that userspace can drive the processing of retire-requests. We assumed
that it would be principally driven by the retire requests worker,
running once every second whilst active and so we would get the deferred
timer for free. Instead we spend too many CPU cycles reclocking the LVDS
preventing real work from being done.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: Alexander Lam <lambchop468@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58843
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Damien Lespiau [Tue, 11 Dec 2012 18:48:29 +0000 (18:48 +0000)]
drm/i915: Preserve the FDI line reversal override bit on CPT
commit
3e68320ef84528604d971afc3cadfbe208bef001 upstream.
The FDI link has supported link reversal to make the PCB layout
engineer's life easier for quite a while and we have always presered
this bit as we programmed FDI_RX_CTL with a read/modify/write sequence.
We're trying to take a bit more control over what the BIOS leaves in
various register and with the introduction of DDI, started to program
FDI_RX_CTL fully.
There's a fused bit to indicate DMI link reversal and FDI defaults to
mirroring that configuration. We have a bit to override that behaviour
that we need to preserve from the BIOS.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Damien Lespiau [Tue, 11 Dec 2012 18:48:30 +0000 (18:48 +0000)]
drm/i915: Preserve the DDI link reversal configuration
commit
876a8cdf92b23d268275cdce4397df0c37dac3fe upstream.
Similarly to:
commit
6a0d1df3d3a0d2370541164eb0595fe35dcd6de3
Author: Damien Lespiau <damien.lespiau@intel.com>
Date: Tue Dec 11 15:18:28 2012 +0000
drm/i915: Preserve the FDI line reversal override bit on CPT
DDI port support lane reversal to easy the PCB layouting work. Let's
preserve the bit configured by the BIOS (until we find how to correctly
retrieve the information from the VBT, but this does sound more fragile
then just relying on the BIOS that has, hopefully, been validated
already.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sat, 23 Feb 2013 03:45:42 +0000 (22:45 -0500)]
get rid of unprotected dereferencing of mnt->mnt_ns
commit
9b40bc90abd126bcc5da5658059b8e72e285e559 upstream.
It's safe only under namespace_sem or vfsmount_lock; all places
in fs/namespace.c that want mnt->mnt_ns->user_ns actually want to use
current->nsproxy->mnt_ns->user_ns (note the calls of check_mnt() in
there).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Vetter [Mon, 21 Jan 2013 18:48:59 +0000 (19:48 +0100)]
intel/iommu: force writebuffer-flush quirk on Gen 4 Chipsets
commit
210561ffd72d00eccf12c0131b8024d5436bae95 upstream.
We already have the quirk entry for the mobile platform, but also
reports on some desktop versions. So be paranoid and set it
everywhere.
References: http://www.mail-archive.com/dri-devel@lists.freedesktop.org/msg33138.html
Reported-and-tested-by: Mihai Moldovan <ionic@ionic.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "Sankaran, Rajesh" <rajesh.sankaran@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Airlie [Thu, 7 Feb 2013 00:10:04 +0000 (10:10 +1000)]
drm/usb: bind driver to correct device
commit
9f23de52b64f7fb801fd76f3dd8651a0dc89187b upstream.
While looking at plymouth on udl I noticed that plymouth was trying
to use its fb plugin not its drm one, it was trying to drmOpen a driver called
usb not udl, noticed that we actually had out driver pointing at the wrong
device.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Vetter [Wed, 13 Feb 2013 10:37:48 +0000 (20:37 +1000)]
Revert "drm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222S"
commit
db3985e5ca8f50fc17606855ba394783d11683a5 upstream.
This reverts commit
6f33814bd4d9cfe76033a31b1c0c76c960cd8e4b.
The quirk cause a regression, and it looks like the original bug was
simply a lack of FIFO bandwidth on the i915G of the reporter. Which
should eventually be fixed as soon as we get around to implemented
DSPARB FIFO reassignment on gen 3.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52281
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Thu, 31 Jan 2013 17:43:38 +0000 (19:43 +0200)]
drm: Use C8 instead of RGB332 when determining the format from depth/bpp
commit
d84f031bd230fdf9c3b7734940c859bf28b90219 upstream.
Support for real RGB332 is a rarity, most hardware only really support
C8. So use C8 instead of RGB332 when determining the format based on
depth/bpp.
This fixes 8bpp fbcon on i915, since i915 will only accept C8 and not
RGB332.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59572
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Tested-by: mlsemon35@gmail.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Thu, 31 Jan 2013 17:43:37 +0000 (19:43 +0200)]
drm: Fill depth/bits_per_pixel for C8 format
commit
c51a6bc5f6d328926a9a4a1247c5030faf190a80 upstream.
Set depth/bits_per_pixel to 8 for C8 format.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>