Harald Hoyer [Fri, 8 Feb 2013 13:14:10 +0000 (14:14 +0100)]
btrfs/btrfs_finished.sh: use btrfs device ready for probing
Harald Hoyer [Fri, 8 Feb 2013 13:13:34 +0000 (14:13 +0100)]
btrfs/80-btrfs.rules: remove modprobe of btrfs module
this should be automatically modprobed by the kernel on demand
Harald Hoyer [Fri, 8 Feb 2013 13:12:59 +0000 (14:12 +0100)]
drm/module-setup.sh: make drm module only install on dependency
Harald Hoyer [Fri, 8 Feb 2013 13:12:34 +0000 (14:12 +0100)]
dracut.sh: make /var/log a symlink to /run/log
Harald Hoyer [Fri, 8 Feb 2013 10:44:23 +0000 (11:44 +0100)]
url-lib/url-lib.sh: turn off curl globbing
https://bugzilla.redhat.com/show_bug.cgi?id=907497
Harald Hoyer [Wed, 6 Feb 2013 16:56:46 +0000 (17:56 +0100)]
network/ifup.sh: echo in get_vid() instead of using the return value
The return value is module 256, so VLAN ids > 255 could not be returned.
Dan Horák [Fri, 25 Jan 2013 13:23:58 +0000 (14:23 +0100)]
set peer for point-to-point connections
network/net-lib.sh: only set net vars, if they have a value
Frederick Grose [Sun, 27 Jan 2013 19:47:17 +0000 (14:47 -0500)]
Provide devices to enable booting with rd.live.overlay.readonly=1
Kevin Yung [Wed, 6 Feb 2013 12:33:42 +0000 (13:33 +0100)]
network/ifup.sh: enable bridged vlan interfaces
To use vlan for net boot, you need to specify vlan and ip kernel options
for the boot interface. For example,
vlan=eth1.1:eth1 bootdev=eth1.1
ip=1.2.3.4:1.2.3.4::255.255.255.0:my-hostname:eth1:none
To use bridge for net boot, you need to specify bridge and ip kernel
option for the boot interface. For example
bridge=br1:eth1 bootdev=br1
ip=1.2.3.4:1.2.3.4::255.255.255.0:my-hostname:eth1:none
In my environment, I needs to boot machines from network within
a vlan or on a bridged network. I found curent dracut release
if-up.sh script in 40network module bypass ip setting for both
bridge and vlan interface.
Dan Horák [Mon, 28 Jan 2013 07:35:28 +0000 (08:35 +0100)]
fix CTC example in rd.znet
The CTC interface uses 2 channels.
Colin Guthrie [Sat, 26 Jan 2013 18:13:28 +0000 (18:13 +0000)]
Mount /proc before including dracut-lib.sh.
When dracut-lib.sh is sourced it checks the command line (when not using systemd)
as part of the check_quiet() call.
Therefore mount /proc earlier in init.
Avoids the error:
init: 77: /lib/dracut-lib.sh: /proc/cmdline: No such file or directory
Harald Hoyer [Tue, 5 Feb 2013 15:45:42 +0000 (16:45 +0100)]
dracut.sh: reverting return value change
reverting _get_fs_type() return values of patch
c8d685c9d3860e49f39a9c85ffebbb4c4fec341f
Harald Hoyer [Tue, 5 Feb 2013 10:02:05 +0000 (11:02 +0100)]
shutdown: call "losetup -D" on shutdown
Harald Hoyer [Tue, 5 Feb 2013 09:56:13 +0000 (10:56 +0100)]
mdmon: renamed mdmon-offroot@.service to mdmon@.service
Harald Hoyer [Tue, 5 Feb 2013 09:56:43 +0000 (10:56 +0100)]
TODO: updated
Harald Hoyer [Wed, 30 Jan 2013 16:22:25 +0000 (17:22 +0100)]
network/net-genrules.sh: remove some bashisms
Joe Lawrence [Thu, 24 Jan 2013 22:26:43 +0000 (17:26 -0500)]
Support out-of-tree and updated drivers in initramfs creation
The find_kernel_modules_by_path function shouldn't filter out modules not
located underneath the /lib/modules/ver/kernel directory as out-of-tree
drivers may reside in /lib/modules/ver/extra and updated drivers in
/lib/modules/ver/updates.
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com>
Harald Hoyer [Wed, 23 Jan 2013 15:23:07 +0000 (16:23 +0100)]
rootfs-block/mount-root.sh: fixup for
8b6bf0ef5
not only fix the warning message, but the real mount arguments, too
Harald Hoyer [Wed, 23 Jan 2013 15:12:18 +0000 (16:12 +0100)]
NEWS: update for version 025
Harald Hoyer [Wed, 23 Jan 2013 14:35:13 +0000 (15:35 +0100)]
version 025
Harald Hoyer [Wed, 23 Jan 2013 14:38:36 +0000 (15:38 +0100)]
dracut.spec: add drm module
Colin Guthrie [Sun, 13 Jan 2013 14:06:58 +0000 (14:06 +0000)]
Include crc32c module for xfs.
Just like btrfs, xfs now requires CRC module that cannot be resolved via
normal module resolving.
Move this hack into fs-lib and remove it from btrfs module.
https://bugs.mageia.org/show_bug.cgi?id=8676
Harald Hoyer [Wed, 23 Jan 2013 13:10:15 +0000 (14:10 +0100)]
dracut-functions.sh: cope with optional field #7 in mountinfo
also handle fstab entries with LABEL=, UUID= and PARTUUID=
Harald Hoyer [Wed, 23 Jan 2013 13:08:23 +0000 (14:08 +0100)]
network/dhclient-script.sh: also touch "/tmp/setup_net_<mac>.ok"
Harald Hoyer [Tue, 22 Jan 2013 17:11:04 +0000 (18:11 +0100)]
romount fix
Dave Young [Fri, 18 Jan 2013 01:59:52 +0000 (09:59 +0800)]
Add memory usage trace to diffrent hook points
Hi, Here is an update of this patch, fixed the local variable issue.
dyoung@redhat.com [Thu, 17 Jan 2013 08:55:50 +0000 (16:55 +0800)]
add function getargnum
For cmdline argument with numeric value, add a new function getargnum
It will get proper value with default value as $1, min value as $2,
max value as $3, and param name as $4. valid result will be echo to stdout.
for nul or value not valid it will just echo the default value.
Note: The values should be >=0
[v1->v2]: add arg <minval>
[v2->v3]: do not use bash string match =~
Signed-off-by: Dave Young <dyoung@redhat.com>
Dave Young [Sun, 6 Jan 2013 06:17:54 +0000 (14:17 +0800)]
use linkup in dhclient-script.sh
linkup is a wrapper function for waiting interface ready and up.
change to use linkup as what we do in ifup script.
Signed-off-by: Dave Young <dyoung@redhat.com>
Colin Guthrie [Mon, 21 Jan 2013 11:23:19 +0000 (11:23 +0000)]
Extend
52f1b041 to allow devices to be specified in config files as well as cmdline.
This also changes the command line switch to be --add-device and the
config directive is set to add_device. This was chosen as device= in the
config file seems too generic and not quite as consistent with other
directives (i.e. drivers/add_drivers)
The --device command line is still supported but it should be considered
deprecated in favour of --add-device.
Jiri Pirko [Thu, 10 Jan 2013 14:02:51 +0000 (15:02 +0100)]
fix teamd exec in case config does not include devname
In case that configuration file did not include name of team device,
teamd would not start. Fix this by adding "-t" parameter.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Harald Hoyer [Fri, 18 Jan 2013 12:46:30 +0000 (13:46 +0100)]
shutdown: kill all processes and report remaining ones
Harald Hoyer [Fri, 18 Jan 2013 10:01:43 +0000 (11:01 +0100)]
mdraid: add mdmon-offroot@.service and takeover mdmon in shutdown
Harald Hoyer [Fri, 18 Jan 2013 10:00:48 +0000 (11:00 +0100)]
shutdown: source pre-shutdown hook and force quit plymouth before umount
Harald Hoyer [Fri, 18 Jan 2013 10:00:00 +0000 (11:00 +0100)]
dracut-lib.sh: force hide plymouth in shutdown emergency shell
Harald Hoyer [Fri, 18 Jan 2013 09:59:39 +0000 (10:59 +0100)]
dracut-functions.sh: add pre-shutdown hook
Harald Hoyer [Fri, 18 Jan 2013 09:13:14 +0000 (10:13 +0100)]
dracut.asc: document shutdown procedure
Harald Hoyer [Mon, 7 Jan 2013 17:00:06 +0000 (18:00 +0100)]
dracut.asc: s/rd.ip/ip/g
Harald Hoyer [Thu, 3 Jan 2013 08:29:05 +0000 (09:29 +0100)]
dracut-functions.sh: fixed inst_rules search path
Harald Hoyer [Wed, 2 Jan 2013 12:43:56 +0000 (13:43 +0100)]
usrmount/mount-usr.sh: filter "subvol=" from root rflags
https://bugzilla.redhat.com/show_bug.cgi?id=890577
Harald Hoyer [Wed, 2 Jan 2013 10:11:21 +0000 (11:11 +0100)]
kernel-modules: create /etc/modprobe.d if it does not yet exist
https://bugzilla.redhat.com/show_bug.cgi?id=873220
Harald Hoyer [Thu, 20 Dec 2012 12:46:31 +0000 (13:46 +0100)]
dmsquash-live: fixed checkisomd5 service call
dyoung@redhat.com [Wed, 12 Dec 2012 04:23:26 +0000 (12:23 +0800)]
Wait for interface up at the early stage
In case long delay of network driver initqueue will exit before net dev is
ready. We have no chance to setup it then.
For dhcp, when we finish the setup there will be a setup_net_<dev>.ok. Doing
same for static ip case. Also add a check to initqueue when we generate udev
rules to ensure it's early enough.
[v1->v2]: only wait for bootdev or it's possible to cause boot fail for
waiting for non-bootdev. For example bond0->eth0, set bond0 as bootdev and
dhcp, we only need to wait bond0 setup ok.
Signed-off-by: Dave Young <dyoung@redhat.com>
dyoung@redhat.com [Wed, 12 Dec 2012 04:23:25 +0000 (12:23 +0800)]
Get ifaces for udev rule use
In case BOOTIF is not set and IFACES are not set in bonding/vlan/bridge code,
net-genrule.sh will fall to bring up all net interfaces.
Here add a failsafe option to read IFACES from /tmp/net.ifaces
[v1->v2]: move IFACES reading from net.ifaces after bonding/vlan/bridge info
code chunks.
[v2->v3]: [ -n "$IFACES" ] should be [ -z "$IFACES" ]
Signed-off-by: Dave Young <dyoung@redhat.com>
dyoung@redhat.com [Wed, 12 Dec 2012 04:23:24 +0000 (12:23 +0800)]
Wait for link ready before use the interface
Some network driver will take long time to initialize. We have an example
in a HP machine which take about one minute for this. The callback such as
"ip link set <dev> up" will fail, afterwards setup for network will also
fail.
Fix this by add a new function wait_for_if_link, wait the link ready before
use it.
Signed-off-by: Dave Young <dyoung@redhat.com>
dyoung@redhat.com [Wed, 12 Dec 2012 04:23:23 +0000 (12:23 +0800)]
Change to use linkup function in network scripts
Update ifup.sh and fcoe-up.sh, use linkup function instead of directly
call ip command.
Signed-off-by: Dave Young <dyoung@redhat.com>
dyoung@redhat.com [Wed, 12 Dec 2012 04:23:22 +0000 (12:23 +0800)]
Add function linkup
set link up usually include two steps, ip link set <dev> up and
wait_for_if_up <dev>. Now do these two steps in one function linkup.
Later patch will add other code into it.
Signed-off-by: Dave Young <dyoung@redhat.com>
dyoung@redhat.com [Wed, 12 Dec 2012 04:23:21 +0000 (12:23 +0800)]
Move wait for if functions to net lib
net-lib.sh are created for net related functions, move the wait_for_if* to
net-lib.sh naturally.
Signed-off-by: Dave Young <dyoung@redhat.com>
Cong Wang [Thu, 13 Dec 2012 14:30:25 +0000 (22:30 +0800)]
dracut: add team device support
V2: merge patch 2/2
fix active-backup mode by adding slaves one by one
sync with the latest teamd
improve the comments
wait for team ports to come up
install /etc/libnl/classid too
This patch adds the initial support for team device [1].
A new cmdline team= is introduced for it.
Note, currently we don't support stacked devices
on/under team, it is tricky and can be added on request.
1. http://www.libteam.org/
Cc: Harald Hoyer <harald@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <amwang@redhat.com>
Harald Hoyer [Fri, 30 Nov 2012 10:15:39 +0000 (11:15 +0100)]
change for "udevadm control": s/--reload-rules/--reload/g
Harald Hoyer [Fri, 30 Nov 2012 10:13:17 +0000 (11:13 +0100)]
iscsi/iscsiroot.sh: reload rules after adding 99-iscsi-root.rules
Harald Hoyer [Thu, 29 Nov 2012 15:23:39 +0000 (16:23 +0100)]
cms/cms-write-ifcfg.sh: also fill in /etc/hostname
Harald Hoyer [Thu, 29 Nov 2012 15:07:15 +0000 (16:07 +0100)]
udev-rules/udev-rules-prepare.sh: get UDEVVERSION, if unset
Amadeusz Żołnowski [Thu, 1 Nov 2012 10:06:22 +0000 (11:06 +0100)]
Fallback to external blkid and path_id in udev rules for <udev-176.
Starting with commit
24a38bc1cbe461c344ce61c7e10b6d51d5689c93 dracut
uses udev builtins but still depends on >=udev-166 in dracut.spec. This
patch makes dracut work with older udev again.
All credits go to Alexander Tsoy <alexander@tsoy.me>; see
https://bugs.gentoo.org/show_bug.cgi?id=437700
Harald Hoyer [Thu, 29 Nov 2012 15:07:35 +0000 (16:07 +0100)]
nfs/nfsroot-cleanup.sh: mount --bind instead of --move
Harald Hoyer [Tue, 27 Nov 2012 12:25:46 +0000 (13:25 +0100)]
dracut.spec: add iputils and iproute requirement for dracut-network
Nicolas Chauvet [Mon, 5 Nov 2012 23:39:04 +0000 (00:39 +0100)]
Fix rd.blacklist.driver when no /etc/modprobe.d exists
This bug was reported as http://bugzilla.redhat.com/873220#c2
As the /etc/modprobe.d isn't created in the boot process
nor bundled within the initramfs, the initramfsblacklist.conf
cannot be created.
Instead, the /usr/lib/modprobe.d directory is available and using it
will restore the blacklist behavior.
Will Woods [Wed, 24 Oct 2012 17:06:28 +0000 (13:06 -0400)]
add 'swapoff' to initramfs to fix shutdown/reboot
systemd shutdown/reboot won't work unless 'swapoff' is available.
Will Woods [Wed, 24 Oct 2012 17:06:11 +0000 (13:06 -0400)]
drop NEWROOT from module-setup.sh
This was almost certainly copy-pasted from mount-root.sh, but it's not
valid here - dracut doesn't use NEWROOT outside of the initramfs.
Dave Young [Mon, 12 Nov 2012 09:24:41 +0000 (17:24 +0800)]
split plymouth module
Kdump module will need the drm and kms kernel modules so user can see the
emergency shell at least.
Fix this by split 50plymouth module to 50drm and 50plymouth. Moving the
installkernel part to 50drm so user can use drm directly without adding
extra plymouth utils.
Signed-off-by: Dave Young <dyoung@redhat.com>
Tested-by: Chao Wang <chaowang@redhat.com>
Harald Hoyer [Thu, 29 Nov 2012 14:53:15 +0000 (15:53 +0100)]
systemd/dracut-cmdline.service: run before systemd-vconsole-setup
cmdline does generate vconsole.conf, which is needed by vconsole-setup
Harald Hoyer [Thu, 29 Nov 2012 14:52:53 +0000 (15:52 +0100)]
systemd/service-to-run.sh: silence "cp" errors
Harald Hoyer [Fri, 30 Nov 2012 14:22:43 +0000 (15:22 +0100)]
crypt/crypt-run-generator.sh: do not timeout for LUKS passwords with systemd
Harald Hoyer [Fri, 14 Dec 2012 07:57:22 +0000 (08:57 +0100)]
dmsquash-live: add systemd checkisomd5 service
Harald Hoyer [Mon, 26 Nov 2012 12:49:38 +0000 (13:49 +0100)]
network: fixed MAC address assignment
Harald Hoyer [Mon, 26 Nov 2012 12:49:19 +0000 (13:49 +0100)]
systemd/module-setup.sh: turn off RateLimit for the journal
Harald Hoyer [Thu, 22 Nov 2012 11:31:18 +0000 (12:31 +0100)]
cms/cmssetup.sh: sync udev rules names with network/net-genrules.sh
https://bugzilla.redhat.com/show_bug.cgi?id=825199
Harald Hoyer [Thu, 22 Nov 2012 11:14:31 +0000 (12:14 +0100)]
nfs/nfs-start-rpc.sh: prevent mount error, if sunrpc kernel module is not in the initramfs
https://bugzilla.redhat.com/show_bug.cgi?id=870632
Harald Hoyer [Thu, 22 Nov 2012 10:58:37 +0000 (11:58 +0100)]
i18n/parse-i18n.sh: fix locale.conf caused by
4dbc1d1bb3dcbb173b02
https://bugzilla.redhat.com/show_bug.cgi?id=870632
Harald Hoyer [Wed, 21 Nov 2012 15:30:58 +0000 (16:30 +0100)]
crypt/crypt-run-generator.sh: fixup last commit
065fc56ab27d8ea1aace72de54a6884bb558ea97
Robert Buchholz [Sun, 11 Nov 2012 19:25:06 +0000 (20:25 +0100)]
Make short uuid specification for allow-discards work
1) strstr " $discarduuids " did not remove the optional
'luks-' prefix from the argument as the documentation says.
2) The lookup seems backwards. $luksdev ($luks in the other code copy)
is the full uuid and thus one should check whether the user-supplied
argument (short form) is contained therein, not the other way around.
Before this commit, the only way to trigger allow-discards was to
specify the full uuid without the 'luks-' prefix.
Harald Hoyer [Wed, 21 Nov 2012 13:07:54 +0000 (14:07 +0100)]
Add sosreport script and generate /run/initramfs/sosreport.txt
Harald Hoyer [Wed, 21 Nov 2012 09:47:38 +0000 (10:47 +0100)]
dracut.sh: do not strip signed kernel modules
https://bugzilla.redhat.com/show_bug.cgi?id=873796
Harald Hoyer [Mon, 19 Nov 2012 15:59:30 +0000 (16:59 +0100)]
[nfs|cifs]root.sh: make "/dev/root" a symlink, so it gets cleaned up later on
Harald Hoyer [Fri, 19 Oct 2012 09:20:07 +0000 (11:20 +0200)]
dracut.sh: only 'warn' not 'error', if we don't strip
WANG Chao [Thu, 18 Oct 2012 08:43:28 +0000 (16:43 +0800)]
40network/ifup.sh: do_static() and do_ipv6auto return 0 if no errors.
Commit a0be1ed removes some lines from do_static() and do_ipv6auto().
When $hostname is empty, do_static() and do_ipv6auto() will return 1
and fails to run setup_net at the last of ifup.sh
Signed-off-by: WANG Chao <chaowang@redhat.com>
Harald Hoyer [Fri, 19 Oct 2012 09:10:03 +0000 (11:10 +0200)]
dracut.conf.d/fedora.conf.example: s/kernelcmdline/kernel_cmdline
Harald Hoyer [Fri, 19 Oct 2012 09:09:38 +0000 (11:09 +0200)]
dracut.sh: only save $kernel_cmdline, if set
Harald Hoyer [Tue, 16 Oct 2012 14:31:06 +0000 (16:31 +0200)]
version 024
Harald Hoyer [Tue, 16 Oct 2012 14:20:33 +0000 (16:20 +0200)]
TEST-04-FULL-SYSTEMD: fixed poweroff
Harald Hoyer [Tue, 16 Oct 2012 14:19:51 +0000 (16:19 +0200)]
AUTHORS: update
Harald Hoyer [Tue, 16 Oct 2012 12:57:09 +0000 (14:57 +0200)]
prelink and preunlink (for FIPS) in the initramfs
also hardlink before strip
Harald Hoyer [Tue, 16 Oct 2012 12:53:26 +0000 (14:53 +0200)]
strip initramfs binaries by default (not all for FIPS)
Harald Hoyer [Tue, 16 Oct 2012 12:51:42 +0000 (14:51 +0200)]
Makefile: cleanup xml files
Radek Vykydal [Tue, 16 Oct 2012 10:34:43 +0000 (12:34 +0200)]
Do not overwrite ifcfg files generated by Anaconda kickstart (#865192)
Harald Hoyer [Thu, 11 Oct 2012 11:14:13 +0000 (13:14 +0200)]
fcoe/fcoe-up: sleep for 3s to allow dcb negotiation
https://bugzilla.redhat.com/show_bug.cgi?id=813057
Harald Hoyer [Fri, 12 Oct 2012 09:54:07 +0000 (11:54 +0200)]
network/parse-ip-opts.sh: relax bootdev handling
Harald Hoyer [Tue, 16 Oct 2012 11:16:53 +0000 (13:16 +0200)]
combine some instmods
Harald Hoyer [Tue, 16 Oct 2012 11:16:18 +0000 (13:16 +0200)]
udev-rules: do not install all /etc/group
Harald Hoyer [Tue, 16 Oct 2012 11:15:40 +0000 (13:15 +0200)]
virtfs: only install by default, if virt environment detected
Harald Hoyer [Tue, 16 Oct 2012 11:15:21 +0000 (13:15 +0200)]
only install /etc/modprobe.d for hostonly
Harald Hoyer [Tue, 16 Oct 2012 08:25:10 +0000 (10:25 +0200)]
lsinitrd.sh: sort by filename
Harald Hoyer [Tue, 16 Oct 2012 07:40:32 +0000 (09:40 +0200)]
dracut.cmdline.7.asc: document rd.ctty
Canek Peláez Valdés [Mon, 15 Oct 2012 00:51:54 +0000 (19:51 -0500)]
Don't install FONT if it's the same as DEFAULT_FONT.
If the user defines FONT in /etc/vconsole.conf as the same font
defined in DEFAULT_FONT, when creating her initd she will get a
message similar to this one:
gzip: /var/tmp/initramfs.wzl9Qt/usr/share/consolefonts/LatArCyrHeb-16.psfu
already exists; do you wish to overwrite (y or n)?
Signed-off-by: Canek Peláez <canek@ciencias.unam.mx>
dyoung@redhat.com [Thu, 11 Oct 2012 08:07:58 +0000 (16:07 +0800)]
ssh-client: remove ctty related check
cttyhack was removed and ctty is supported by default, so no need to
check it in ssh-client module any more.
Signed-off-by: Dave Young <dyoung@redhat.com>
Harald Hoyer [Tue, 16 Oct 2012 07:36:28 +0000 (09:36 +0200)]
dracut-functions.sh: don't ask question on gzip uncompress
Harald Hoyer [Wed, 10 Oct 2012 13:56:21 +0000 (15:56 +0200)]
dracut.cmdline.7.asc: add warning about passwords on the kernel cmdline
Harald Hoyer [Wed, 10 Oct 2012 13:18:26 +0000 (15:18 +0200)]
dracut*.asc: add documentation about /etc/cmdline.d/*.conf
Harald Hoyer [Wed, 10 Oct 2012 12:32:18 +0000 (14:32 +0200)]
Makefile: use fedora css for documentation
Harald Hoyer [Wed, 10 Oct 2012 12:15:11 +0000 (14:15 +0200)]
consistently lowercase "dracut"
Harald Hoyer [Wed, 10 Oct 2012 12:14:31 +0000 (14:14 +0200)]
TEST-04-FULL-SYSTEMD/test.sh: fixed $kernel var